/* $Id: VBox-CodingGuidelines.cpp 73806 2018-08-21 17:30:48Z vboxsync $ */
/** @file
* VBox - Coding Guidelines.
*/
/*
* Copyright (C) 2006-2017 Oracle Corporation
*
* This file is part of VirtualBox Open Source Edition (OSE), as
* available from http://www.virtualbox.org. This file is free software;
* you can redistribute it and/or modify it under the terms of the GNU
* General Public License (GPL) as published by the Free Software
* Foundation, in version 2 as it comes in the "COPYING" file of the
* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
*/
/** @page pg_vbox_guideline VBox Coding Guidelines
*
* The compulsory sections of these guidelines are to be followed in all of the
* VBox sources. Please note that local guidelines in parts of the VBox source
* tree may promote the optional ones to compulsory status. The VBox tree also
* contains some 3rd party sources where it is good to follow the local coding
* style while keeping these guidelines in mind.
*
* Contents:
* - @ref sec_vbox_guideline_compulsory
* - @ref sec_vbox_guideline_compulsory_sub64
* - @ref sec_vbox_guideline_compulsory_cppmain
* - @ref sec_vbox_guideline_compulsory_cppqtgui
* - @ref sec_vbox_guideline_compulsory_xslt
* - @ref sec_vbox_guideline_compulsory_doxygen
* - @ref sec_vbox_guideline_compulsory_guest
* - @ref sec_vbox_guideline_optional
* - @ref sec_vbox_guideline_optional_layout
* - @ref sec_vbox_guideline_optional_prefix
* - @ref sec_vbox_guideline_optional_misc
* - @ref sec_vbox_guideline_warnings
* - @ref sec_vbox_guideline_warnings_signed_unsigned_compare
* - @ref sec_vbox_guideline_svn
*
* Local guidelines overrides:
* - src/VBox/VMM/: @ref pg_vmm_guideline (src/VBox/VMM/Docs-CodingGuidelines.cpp)
* - src/VBox/ValidationKit/: @ref pg_validationkit_guideline (src/VBox/ValidationKit/ValidationKitCodingGuidelines.cpp)
* - src/VBox/Runtime/: All of @ref sec_vbox_guideline_optional is mandatory.
* - src/VBox/Main/: @ref sec_vbox_guideline_compulsory_cppmain
* - src/VBox/Frontends/VirtualBox/: @ref sec_vbox_guideline_compulsory_cppqtgui
*
*
* @section sec_vbox_guideline_compulsory Compulsory
*
*
*
* - The indentation size is 4 chars.
*
*
- Tabs are only ever used in makefiles.
*
*
- Use RT and VBOX types.
*
*
- Use Runtime functions.
*
*
- Use the standard bool, uintptr_t, intptr_t and [u]int[1-9+]_t types.
*
*
- Avoid using plain unsigned and int.
*
*
- Use static wherever possible. This makes the namespace less polluted
* and avoids nasty name clash problems which can occur, especially on
* Unix-like systems. (1) It also simplifies locating callers when
* changing it (single source file vs entire VBox tree).
*
*
- Public names are of the form Domain[Subdomain[]]Method, using mixed
* casing to mark the words. The main domain is all uppercase.
* (Think like java, mapping domain and subdomain to packages/classes.)
*
*
- Public names are always declared using the appropriate DECL macro. (2)
*
*
- Internal names starts with a lowercased main domain.
*
*
- Defines are all uppercase and separate words with underscore.
* This applies to enum values too.
*
*
- Typedefs are all uppercase and contain no underscores to distinguish
* them from defines.
*
*
- Pointer typedefs start with 'P'. If pointer to const then 'PC'.
*
*
- Function typedefs start with 'FN'. If pointer to FN then 'PFN'.
*
*
- All files are case sensitive.
*
*
- Slashes are unix slashes ('/') runtime converts when necessary.
*
*
- char strings are UTF-8.
*
*
- Strings from any external source must be treated with utmost care as
* they do not have to be valid UTF-8. Only trust internal strings.
*
*
- All functions return VBox status codes. There are three general
* exceptions from this:
*
*
* - Predicate functions. These are function which are boolean in
* nature and usage. They return bool. The function name will
* include 'Has', 'Is' or similar.
*
- Functions which by nature cannot possibly fail.
* These return void.
*
- "Get"-functions which return what they ask for.
* A get function becomes a "Query" function if there is any
* doubt about getting what is ask for.
*
*
* - VBox status codes have three subdivisions:
*
* - Errors, which are VERR_ prefixed and negative.
*
- Warnings, which are VWRN_ prefixed and positive.
*
- Informational, which are VINF_ prefixed and positive.
*
*
* - Platform/OS operation are generalized and put in the IPRT.
*
*
- Other useful constructs are also put in the IPRT.
*
*
- The code shall not cause compiler warnings. Check this on ALL
* the platforms.
*
*
- The use of symbols leading with single or double underscores is
* forbidden as that intrudes on reserved compiler/system namespace. (3)
*
*
- All files have file headers with $Id and a file tag which describes
* the file in a sentence or two.
* Note: Use the svn-ps.cmd/svn-ps.sh utility with the -a option to add
* new sources with keyword expansion and exporting correctly
* configured.
*
*
- All public functions are fully documented in Doxygen style using the
* javadoc dialect (using the 'at' instead of the 'slash' as
* commandprefix.)
*
*
- All structures in header files are described, including all their
* members. (Doxygen style, of course.)
*
*
- All modules have a documentation '\@page' in the main source file
* which describes the intent and actual implementation.
*
*
- Code which is doing things that are not immediately comprehensible
* shall include explanatory comments.
*
*
- Documentation and comments are kept up to date.
*
*
- Headers in /include/VBox shall not contain any slash-slash C++
* comments, only ANSI C comments!
*
*
- Comments on \#else indicates what begins while the comment on a
* \#endif indicates what ended. Only add these when there are more than
* a few lines (6-10) of \#ifdef'ed code, otherwise they're just clutter.
*
*
- \#ifdefs around a single function shall be tight, i.e. no empty
* lines between it and the function documentation and body.
*
*
- \#ifdefs around more than one function shall be relaxed, i.e. leave at
* least one line before the first function's documentation comment and
* one line after the end of the last function.
*
*
- No 'else' after if block ending with 'return', 'break', or 'continue'.
*
*
- The term 'last' is inclusive, whereas the term 'end' is exclusive.
*
*
- Go through all of this: https://www.slideshare.net/olvemaudal/deep-c/
*
*
*
* (1) It is common practice on Unix to have a single symbol namespace for an
* entire process. If one is careless symbols might be resolved in a
* different way that one expects, leading to weird problems.
*
* (2) This is common practice among most projects dealing with modules in
* shared libraries. The Windows / PE __declspect(import) and
* __declspect(export) constructs are the main reason for this.
* OTOH, we do perhaps have a bit too detailed graining of this in VMM...
*
* (3) There are guys out there grepping public sources for symbols leading with
* single and double underscores as well as gotos and other things
* considered bad practice. They'll post statistics on how bad our sources
* are on some mailing list, forum or similar.
*
*
* @subsection sec_vbox_guideline_compulsory_sub64 64-bit and 32-bit
*
* Here are some amendments which address 64-bit vs. 32-bit portability issues.
*
* Some facts first:
*
*
*
* - On 64-bit Windows the type long remains 32-bit. On nearly all other
* 64-bit platforms long is 64-bit.
*
*
- On all 64-bit platforms we care about, int is 32-bit, short is 16 bit
* and char is 8-bit.
* (I don't know about any platforms yet where this isn't true.)
*
*
- size_t, ssize_t, uintptr_t, ptrdiff_t and similar are all 64-bit on
* 64-bit platforms. (These are 32-bit on 32-bit platforms.)
*
*
- There is no inline assembly support in the 64-bit Microsoft compilers.
*
*
*
* Now for the guidelines:
*
*
*
* - Never, ever, use int, long, ULONG, LONG, DWORD or similar to cast a
* pointer to integer. Use uintptr_t or intptr_t. If you have to use
* NT/Windows types, there is the choice of ULONG_PTR and DWORD_PTR.
*
*
- Avoid where ever possible the use of the types 'long' and 'unsigned
* long' as these differs in size between windows and the other hosts
* (see above).
*
*
- RT_OS_WINDOWS is defined to indicate Windows. Do not use __WIN32__,
* __WIN64__ and __WIN__ because they are all deprecated and scheduled
* for removal (if not removed already). Do not use the compiler
* defined _WIN32, _WIN64, or similar either. The bitness can be
* determined by testing ARCH_BITS.
* Example:
* @code
* #ifdef RT_OS_WINDOWS
* // call win32/64 api.
* #endif
* #ifdef RT_OS_WINDOWS
* # if ARCH_BITS == 64
* // call win64 api.
* # else // ARCH_BITS == 32
* // call win32 api.
* # endif // ARCH_BITS == 32
* #else // !RT_OS_WINDOWS
* // call posix api
* #endif // !RT_OS_WINDOWS
* @endcode
*
*
- There are RT_OS_xxx defines for each OS, just like RT_OS_WINDOWS
* mentioned above. Use these defines instead of any predefined
* compiler stuff or defines from system headers.
*
*
- RT_ARCH_X86 is defined when compiling for the x86 the architecture.
* Do not use __x86__, __X86__, __[Ii]386__, __[Ii]586__, or similar
* for this purpose.
*
*
- RT_ARCH_AMD64 is defined when compiling for the AMD64 architecture.
* Do not use __AMD64__, __amd64__ or __x64_86__.
*
*
- Take care and use size_t when you have to, esp. when passing a pointer
* to a size_t as a parameter.
*
*
- Be wary of type promotion to (signed) integer. For example the
* following will cause u8 to be promoted to int in the shift, and then
* sign extended in the assignment 64-bit:
* @code
* uint8_t u8 = 0xfe;
* uint64_t u64 = u8 << 24;
* // u64 == 0xfffffffffe000000
* @endcode
*
*
*
* @subsection sec_vbox_guideline_compulsory_cppmain C++ guidelines for Main
*
* Since the Main API code is a large amount of C++ code, it is allowed but
* not required to use C++ style comments (as permanent comments, beyond the
* temporary use allowed by the general coding guideline). This is a weak
* preference, i.e. large scale comment style changes are not encouraged.
*
* Main is currently (2009) full of hard-to-maintain code that uses complicated
* templates. The new mid-term goal for Main is to have less custom templates
* instead of more for the following reasons:
*
*
*
* - Template code is harder to read and understand. Custom templates create
* territories which only the code writer understands.
*
*
- Errors in using templates create terrible C++ compiler messages.
*
*
- Template code is really hard to look at in a debugger.
*
*
- Templates slow down the compiler a lot.
*
*
*
* In particular, the following bits should be considered deprecated and should
* NOT be used in new code:
*
*
*
* - everything in include/iprt/cpputils.h (auto_ref_ptr, exception_trap_base,
* char_auto_ptr and friends)
*
*
*
* Generally, in many cases, a simple class with a proper destructor can achieve
* the same effect as a 1,000-line template include file, and the code is
* much more accessible that way.
*
* Using standard STL templates like std::list, std::vector and std::map is OK.
* Exceptions are:
*
*
*
* - Guest Additions because we don't want to link against libstdc++ there.
*
*
- std::string should not be used because we have iprt::MiniString and
* com::Utf8Str which can convert efficiently with COM's UTF-16 strings.
*
*
- std::auto_ptr<> in general; that part of the C++ standard is just broken.
* Write a destructor that calls delete.
*
*
*
* @subsection sec_vbox_guideline_compulsory_cppqtgui C++ guidelines for the Qt GUI
*
* The Qt GUI is currently (2010) on its way to become more compatible to the
* rest of VirtualBox coding style wise. From now on, all the coding style
* rules described in this file are also mandatory for the Qt GUI. Additionally
* the following rules should be respected:
*
*
*
* - GUI classes which correspond to GUI tasks should be prefixed by UI (no VBox anymore)
*
*
- Classes which extents some of the Qt classes should be prefix by QI
*
*
- General task classes should be prefixed by C
*
*
- Slots are prefixed by slt -> sltName
*
*
- Signals are prefixed by sig -> sigName
*
*
- Use Qt classes for lists, strings and so on, the use of STL classes should
* be avoided
*
*
- All files like .cpp, .h, .ui, which belong together are located in the
* same directory and named the same
*
*
*
*
* @subsection sec_vbox_guideline_compulsory_xslt XSLT
*
* XSLT (eXtensible Stylesheet Language Transformations) is used quite a bit in
* the Main API area of VirtualBox to generate sources and bindings to that API.
* There are a couple of common pitfalls worth mentioning:
*
*
*
* - Never do repeated //interface[\@name=...] and //enum[\@name=...] lookups
* because they are expensive. Instead delcare xsl:key elements for these
* searches and do the lookup using the key() function. xsltproc uses
* (per current document) hash tables for each xsl:key, i.e. very fast.
*
*
- When output type is 'text' make sure to call xsltprocNewlineOutputHack
* from typemap-shared.inc.xsl every few KB of output, or xsltproc will
* end up wasting all the time reallocating the output buffer.
*
*
*
*
* @subsection sec_vbox_guideline_compulsory_doxygen Doxygen Comments
*
* As mentioned above, we shall use doxygen/javadoc style commenting of public
* functions, typedefs, classes and such. It is mandatory to use this style
* everywhere!
*
* A couple of hints on how to best write doxygen comments:
*
*
*
* - A good class, method, function, structure or enum doxygen comment
* starts with a one line sentence giving a brief description of the
* item. Details comes in a new paragraph (after blank line).
*
*
- Except for list generators like \@todo, \@cfgm, \@gcfgm and others,
* all doxygen comments are related to things in the code. So, for
* instance you DO NOT add a doxygen \@note comment in the middle of a
* because you've got something important to note, you add a normal
* comment like 'Note! blah, very importan blah!'
*
*
- We do NOT use TODO/XXX/BUGBUG or similar markers in the code to flag
* things needing fixing later, we always use \@todo doxygen comments.
*
*
- There is no colon after the \@todo. And it is ALWAYS in a doxygen
* comment.
*
*
- The \@retval tag is used to explain status codes a method/function may
* returns. It is not used to describe output parameters, that is done
* using the \@param or \@param[out] tag.
*
*
*
* See https://www.stack.nl/~dimitri/doxygen/manual/index.html for the official
* doxygen documention.
*
*
*
* @subsection sec_vbox_guideline_compulsory_guest Handling of guest input
*
* First, guest input should ALWAYS be consider to be TOXIC and constructed with
* MALICIOUS intent! Max paranoia level!
*
* Second, when getting inputs from memory shared with the guest, be EXTREMELY
* careful to not re-read input from shared memory after validating it, because
* that will create TOCTOU problems. So, after reading input from shared memory
* always use the RT_UNTRUSTED_NONVOLATILE_COPY_FENCE() macro. For more details
* on TOCTOU: https://en.wikipedia.org/wiki/Time_of_check_to_time_of_use
*
* Thirdly, considering the recent speculation side channel issues, spectre v1
* in particular, we would like to be ready for future screwups. This means
* having input validation in a separate block of code that ends with one (or
* more) RT_UNTRUSTED_VALIDATED_FENCE().
*
* So the rules:
*
*
*
* - Mark all pointers to shared memory with RT_UNTRUSTED_VOLATILE_GUEST.
*
*
- Copy volatile data into local variables or heap before validating
* them (see RT_COPY_VOLATILE() and RT_BCOPY_VOLATILE().
*
*
- Place RT_UNTRUSTED_NONVOLATILE_COPY_FENCE() after a block copying
* volatile data.
*
*
- Always validate untrusted inputs in a block ending with a
* RT_UNTRUSTED_VALIDATED_FENCE().
*
*
- Use the ASSERT_GUEST_XXXX macros from VBox/AssertGuest.h to validate
* guest input. (Do NOT use iprt/assert.h macros.)
*
*
- Validation of an input B may require using another input A to look up
* some data, in which case its necessary to insert an
* RT_UNTRUSTED_VALIDATED_FENCE() after validating A and before A is used
* for the lookup.
*
* For example A is a view identifier, idView, and B is an offset into
* the view's framebuffer area, offView. To validate offView (B) it is
* necessary to get the size of the views framebuffer region:
* @code
* uint32_t const idView = pReq->idView; // A
* uint32_t const offView = pReq->offView; // B
* RT_UNTRUSTED_NONVOLATILE_COPY_FENCE();
*
* ASSERT_GUEST_RETURN(idView < pThis->cView,
* VERR_INVALID_PARAMETER);
* RT_UNTRUSTED_VALIDATED_FENCE();
* const MYVIEW *pView = &pThis->aViews[idView];
* ASSERT_GUEST_RETURN(offView < pView->cbFramebufferArea,
* VERR_OUT_OF_RANGE);
* RT_UNTRUSTED_VALIDATED_FENCE();
* @endcode
*
*
- Take care to make sure input check are not subject to integer overflow problems.
*
* For instance when validating an area, you must not just add cbDst + offDst
* and check against pThis->offEnd or something like that. Rather do:
* @code
* uint32_t const offDst = pReq->offDst;
* uint32_t const cbDst = pReq->cbDst;
* RT_UNTRUSTED_NONVOLATILE_COPY_FENCE();
*
* ASSERT_GUEST_RETURN( cbDst <= pThis->cbSrc
* && offDst < pThis->cbSrc - cbDst,
* VERR_OUT_OF_RANGE);
* RT_UNTRUSTED_VALIDATED_FENCE();
* @endcode
*
*
- Input validation does not only apply to shared data cases, but also to
* I/O port and MMIO handlers.
*
*
- Ditto for kernel drivers working with usermode inputs.
*
*
*
*
* Problem patterns:
* - https://en.wikipedia.org/wiki/Time_of_check_to_time_of_use
* - https://googleprojectzero.blogspot.de/2018/01/reading-privileged-memory-with-side.html
* (Variant 1 only).
* - https://en.wikipedia.org/wiki/Integer_overflow
*
*
*
* @section sec_vbox_guideline_optional Optional
*
* First part is the actual coding style and all the prefixes. The second part
* is a bunch of good advice.
*
*
* @subsection sec_vbox_guideline_optional_layout The code layout
*
*
*
* - Max line length is 130 chars. Exceptions are table-like
* code/initializers and Log*() statements (don't waste unnecessary
* vertical space on debug logging).
*
*
- Comments should try stay within the usual 80 columns as these are
* denser and too long lines may be harder to read.
*
*
- Curly brackets are not indented. Example:
* @code
* if (true)
* {
* Something1();
* Something2();
* }
* else
* {
* SomethingElse1().
* SomethingElse2().
* }
* @endcode
*
*
- Space before the parentheses when it comes after a C keyword.
*
*
- No space between argument and parentheses. Exception for complex
* expression. Example:
* @code
* if (PATMR3IsPatchGCAddr(pVM, GCPtr))
* @endcode
*
*
- The else of an if is always the first statement on a line. (No curly
* stuff before it!)
*
*
- else and if go on the same line if no { compound statement }
* follows the if. Example:
* @code
* if (fFlags & MYFLAGS_1)
* fFlags &= ~MYFLAGS_10;
* else if (fFlags & MYFLAGS_2)
* {
* fFlags &= ~MYFLAGS_MASK;
* fFlags |= MYFLAGS_5;
* }
* else if (fFlags & MYFLAGS_3)
* @endcode
*
*
- Slightly complex boolean expressions are split into multiple lines,
* putting the operators first on the line and indenting it all according
* to the nesting of the expression. The purpose is to make it as easy as
* possible to read. Example:
* @code
* if ( RT_SUCCESS(rc)
* || (fFlags & SOME_FLAG))
* @endcode
*
*
- When 'if' or 'while' statements gets long, the closing parentheses
* goes right below the opening parentheses. This may be applied to
* sub-expression. Example:
* @code
* if ( RT_SUCCESS(rc)
* || ( fSomeStuff
* && fSomeOtherStuff
* && fEvenMoreStuff
* )
* || SomePredicateFunction()
* )
* {
* ...
* }
* @endcode
*
*
- The case is indented from the switch (to avoid having the braces for
* the 'case' at the same level as the 'switch' statement).
*
*
- If a case needs curly brackets they contain the entire case, are not
* indented from the case, and the break or return is placed inside them.
* Example:
* @code
* switch (pCur->eType)
* {
* case PGMMAPPINGTYPE_PAGETABLES:
* {
* unsigned iPDE = pCur->GCPtr >> PGDIR_SHIFT;
* unsigned iPT = (pCur->GCPtrEnd - pCur->GCPtr) >> PGDIR_SHIFT;
* while (iPT-- > 0)
* if (pPD->a[iPDE + iPT].n.u1Present)
* return VERR_HYPERVISOR_CONFLICT;
* break;
* }
* }
* @endcode
*
*
- In a do while construction, the while is on the same line as the
* closing "}" if any are used.
* Example:
* @code
* do
* {
* stuff;
* i--;
* } while (i > 0);
* @endcode
*
*
- Comments are in C style. C++ style comments are used for temporary
* disabling a few lines of code.
*
*
- No unnecessary parentheses in expressions (just don't over do this
* so that gcc / msc starts bitching). Find a correct C/C++ operator
* precedence table if needed.
*
*
- 'for (;;)' is preferred over 'while (true)' and 'while (1)'.
*
*
- Parameters are indented to the start parentheses when breaking up
* function calls, declarations or prototypes. (This is in line with
* how 'if', 'for' and 'while' statements are done as well.) Example:
* @code
* RTPROCESS hProcess;
* int rc = RTProcCreateEx(papszArgs[0],
* papszArgs,
* RTENV_DEFAULT,
* fFlags,
* NULL, // phStdIn
* NULL, // phStdOut
* NULL, // phStdErr
* NULL, // pszAsUser
* NULL, // pszPassword
* &hProcess);
* @endcode
*
*
- That Dijkstra is dead is no excuse for using gotos.
*
*
- Using do-while-false loops to avoid gotos is considered very bad form.
* They create hard to read code. They tend to be either too short (i.e.
* pointless) or way to long (split up the function already), making
* tracking the state is difficult and prone to bugs. Also, they cause
* the compiler to generate suboptimal code, because the break branches
* are by preferred over the main code flow (MSC has no branch hinting!).
* Instead, do make use the 130 columns (i.e. nested ifs) and split
* the code up into more functions!
*
*
- Avoid code like
* @code
* int foo;
* int rc;
* ...
* rc = FooBar();
* if (RT_SUCCESS(rc))
* {
* foo = getFoo();
* ...
* pvBar = RTMemAlloc(sizeof(*pvBar));
* if (!pvBar)
* rc = VERR_NO_MEMORY;
* }
* if (RT_SUCCESS(rc))
* {
* buzz = foo;
* ...
* }
* @endcode
* The intention of such code is probably to save some horizontal space
* but unfortunately it's hard to read and the scope of certain varables
* (e.g. foo in this example) is not optimal. Better use the following
* style:
* @code
* int rc;
* ...
* rc = FooBar();
* if (RT_SUCCESS(rc))
* {
* int foo = getFoo();
* ...
* pvBar = RTMemAlloc(sizeof(*pvBar));
* if (pvBar)
* {
* buzz = foo;
* ...
* }
* else
* rc = VERR_NO_MEMORY;
* }
* @endcode
*
*
*
* @subsection sec_vbox_guideline_optional_prefix Variable / Member Prefixes
*
* Prefixes are meant to provide extra context clues to a variable/member, we
* therefore avoid using prefixes that just indicating the type if a better
* choice is available.
*
*
* The prefixes:
*
*
*
* - The 'g_' (or 'g') prefix means a global variable, either on file or module level.
*
*
- The 's_' (or 's') prefix means a static variable inside a function or
* class. This is not used for static variables on file level, use 'g_'
* for those (logical, right).
*
*
- The 'm_' (or 'm') prefix means a class data member.
*
* In new code in Main, use "m_" (and common sense). As an exception,
* in Main, if a class encapsulates its member variables in an anonymous
* structure which is declared in the class, but defined only in the
* implementation (like this: 'class X { struct Data; Data *m; }'), then
* the pointer to that struct is called 'm' itself and its members then
* need no prefix, because the members are accessed with 'm->member'
* already which is clear enough.
*
*
- The 'a_' prefix means a parameter (argument) variable. This is
* sometimes written 'a' in parts of the source code that does not use
* the array prefix.
*
*
- The 'p' prefix means pointer. For instance 'pVM' is pointer to VM.
*
*
- The 'r' prefix means that something is passed by reference.
*
*
- The 'k' prefix means that something is a constant. For instance
* 'enum { kStuff };'. This is usually not used in combination with
* 'p', 'r' or any such thing, it's main main use is to make enums
* easily identifiable.
*
*
- The 'a' prefix means array. For instance 'aPages' could be read as
* array of pages.
*
*
- The 'c' prefix means count. For instance 'cbBlock' could be read,
* count of bytes in block. (1)
*
*
- The 'cx' prefix means width (count of 'x' units).
*
*
- The 'cy' prefix means height (count of 'y' units).
*
*
- The 'x', 'y' and 'z' prefix refers to the x-, y- , and z-axis
* respectively.
*
*
- The 'off' prefix means offset.
*
*
- The 'i' or 'idx' prefixes usually means index. Although the 'i' one
* can sometimes just mean signed integer.
*
*
- The 'i[1-9]+' prefix means a fixed bit size variable. Frequently
* used with the int[1-9]+_t types where the width is really important.
* In most cases 'i' is more appropriate. [type]
*
*
- The 'e' (or 'enm') prefix means enum.
*
*
- The 'u' prefix usually means unsigned integer. Exceptions follows.
*
*
- The 'u[1-9]+' prefix means a fixed bit size variable. Frequently
* used with the uint[1-9]+_t types and with bitfields where the width is
* really important. In most cases 'u' or 'b' (byte) would be more
* appropriate. [type]
*
*
- The 'b' prefix means byte or bytes. [type]
*
*
- The 'f' prefix means flags. Flags are unsigned integers of some kind
* or booleans.
*
*
- TODO: need prefix for real float. [type]
*
*
- The 'rd' prefix means real double and is used for 'double' variables.
* [type]
*
*
- The 'lrd' prefix means long real double and is used for 'long double'
* variables. [type]
*
*
- The 'ch' prefix means a char, the (signed) char type. [type]
*
*
- The 'wc' prefix means a wide/windows char, the RTUTF16 type. [type]
*
*
- The 'uc' prefix means a Unicode Code point, the RTUNICP type. [type]
*
*
- The 'uch' prefix means unsigned char. It's rarely used. [type]
*
*
- The 'sz' prefix means zero terminated character string (array of
* chars). (UTF-8)
*
*
- The 'wsz' prefix means zero terminated wide/windows character string
* (array of RTUTF16).
*
*
- The 'usz' prefix means zero terminated Unicode string (array of
* RTUNICP).
*
*
- The 'str' prefix means C++ string; either a std::string or, in Main,
* a Utf8Str or, in Qt, a QString. When used with 'p', 'r', 'a' or 'c'
* the first letter should be capitalized.
*
*
- The 'bstr' prefix, in Main, means a UTF-16 Bstr. When used with 'p',
* 'r', 'a' or 'c' the first letter should be capitalized.
*
*
- The 'pfn' prefix means pointer to function. Common usage is 'pfnCallback'
* and such like.
*
*
- The 'psz' prefix is a combination of 'p' and 'sz' and thus means
* pointer to a zero terminated character string. (UTF-8)
*
*
- The 'pcsz' prefix is used to indicate constant string pointers in
* parts of the code. Most code uses 'psz' for const and non-const
* string pointers, so please ignore this one.
*
*
- The 'l' prefix means (signed) long. We try avoid using this,
* expecially with the 'LONG' types in Main as these are not 'long' on
* 64-bit non-Windows platforms and can cause confusion. Alternatives:
* 'i' or 'i32'. [type]
*
*
- The 'ul' prefix means unsigned long. We try avoid using this,
* expecially with the 'ULONG' types in Main as these are not 'unsigned
* long' on 64-bit non-Windows platforms and can cause confusion.
* Alternatives: 'u' or 'u32'. [type]
*
*
*
* (1) Except in the occasional 'pcsz' prefix, the 'c' prefix is never ever
* used in the meaning 'const'.
*
*
* @subsection sec_vbox_guideline_optional_misc Misc / Advice / Stuff
*
*
*
* - When writing code think as the reader.
*
*
- When writing code think as the compiler. (2)
*
*
- When reading code think as if it's full of bugs - find them and fix them.
*
*
- Pointer within range tests like:
* @code
* if ((uintptr_t)pv >= (uintptr_t)pvBase && (uintptr_t)pv < (uintptr_t)pvBase + cbRange)
* @endcode
* Can also be written as (assuming cbRange unsigned):
* @code
* if ((uintptr_t)pv - (uintptr_t)pvBase < cbRange)
* @endcode
* Which is shorter and potentially faster. (1)
*
*
- Avoid unnecessary casting. All pointers automatically cast down to
* void *, at least for non class instance pointers.
*
*
- It's very very bad practise to write a function larger than a
* screen full (1024x768) without any comprehensibility and explaining
* comments.
*
*
- More to come....
*
*
*
* (1) Important, be very careful with the casting. In particular, note that
* a compiler might treat pointers as signed (IIRC).
*
* (2) "A really advanced hacker comes to understand the true inner workings of
* the machine - he sees through the language he's working in and glimpses
* the secret functioning of the binary code - becomes a Ba'al Shem of
* sorts." (Neal Stephenson "Snow Crash")
*
*
*
* @section sec_vbox_guideline_warnings Compiler Warnings
*
* The code should when possible compile on all platforms and compilers without any
* warnings. That's a nice idea, however, if it means making the code harder to read,
* less portable, unreliable or similar, the warning should not be fixed.
*
* Some of the warnings can seem kind of innocent at first glance. So, let's take the
* most common ones and explain them.
*
*
* @subsection sec_vbox_guideline_warnings_signed_unsigned_compare Signed / Unsigned Compare
*
* GCC says: "warning: comparison between signed and unsigned integer expressions"
* MSC says: "warning C4018: '<|<=|==|>=|>' : signed/unsigned mismatch"
*
* The following example will not output what you expect:
@code
#include
int main()
{
signed long a = -1;
unsigned long b = 2294967295;
if (a < b)
printf("%ld < %lu: true\n", a, b);
else
printf("%ld < %lu: false\n", a, b);
return 0;
}
@endcode
* If I understood it correctly, the compiler will convert a to an
* unsigned long before doing the compare.
*
*
*
* @section sec_vbox_guideline_svn Subversion Commit Rules
*
*
* Before checking in:
*
*
*
* - Check Tinderbox and make sure the tree is green across all platforms. If it's
* red on a platform, don't check in. If you want, warn in the \#vbox channel and
* help make the responsible person fix it.
* NEVER CHECK IN TO A BROKEN BUILD.
*
*
- When checking in keep in mind that a commit is atomic and that the Tinderbox and
* developers are constantly checking out the tree. Therefore do not split up the
* commit unless it's into 100% independent parts. If you need to split it up in order
* to have sensible commit comments, make the sub-commits as rapid as possible.
*
*
- If you make a user visible change, such as fixing a reported bug,
* make sure you add an entry to doc/manual/user_ChangeLogImpl.xml.
*
*
- If you are adding files make sure set the right attributes.
* svn-ps.sh/cmd was created for this purpose, please make use of it.
*
*
*
* After checking in:
*
*
*
* - After checking-in, you watch Tinderbox until your check-ins clear. You do not
* go home. You do not sleep. You do not log out or experiment with drugs. You do
* not become unavailable. If you break the tree, add a comment saying that you're
* fixing it. If you can't fix it and need help, ask in the \#innotek channel or back
* out the change.
*
*
*
* (Inspired by mozilla tree rules.)
*
*
*/