/** @file * VirtualBox Status Codes. */ /* * Copyright (C) 2006-2009 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ #ifndef ___VBox_err_h #define ___VBox_err_h #include #include /** @defgroup grp_err Error Codes * @{ */ /* SED-START */ /** @name Misc. Status Codes * @{ */ /** Failed to allocate VM memory. */ #define VERR_NO_VM_MEMORY (-1000) /** GC is toasted and the VMM should be terminated at once, but no need to panic about it :-) */ #define VERR_DONT_PANIC (-1001) /** Unsupported CPU. */ #define VERR_UNSUPPORTED_CPU (-1002) /** Unsupported CPU mode. */ #define VERR_UNSUPPORTED_CPU_MODE (-1003) /** Page not present. */ #define VERR_PAGE_NOT_PRESENT (-1004) /** Invalid/Corrupted configuration file. */ #define VERR_CFG_INVALID_FORMAT (-1005) /** No configuration value exists. */ #define VERR_CFG_NO_VALUE (-1006) /** Not selector not present. */ #define VERR_SELECTOR_NOT_PRESENT (-1007) /** Not code selector. */ #define VERR_NOT_CODE_SELECTOR (-1008) /** Not data selector. */ #define VERR_NOT_DATA_SELECTOR (-1009) /** Out of selector bounds. */ #define VERR_OUT_OF_SELECTOR_BOUNDS (-1010) /** Invalid selector. Usually beyond table limits. */ #define VERR_INVALID_SELECTOR (-1011) /** Invalid requested privilegde level. */ #define VERR_INVALID_RPL (-1012) /** PML4 entry not present. */ #define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013) /** Page directory pointer not present. */ #define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014) /** Raw mode doesn't support SMP. */ #define VERR_RAW_MODE_INVALID_SMP (-1015) /** Invalid VM handle. */ #define VERR_INVALID_VM_HANDLE (-1016) /** Invalid VM handle. */ #define VERR_INVALID_VMCPU_HANDLE (-1017) /** Invalid Virtual CPU ID. */ #define VERR_INVALID_CPU_ID (-1018) /** Too many VCPUs. */ #define VERR_TOO_MANY_CPUS (-1019) /** @} */ /** @name Execution Monitor/Manager (EM) Status Codes * * The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST * are of vital importance. The lower the number the higher importance * as a scheduling instruction. * @{ */ /** First scheduling related status code. */ #define VINF_EM_FIRST 1100 /** Indicating that the VM is being terminated and that the the execution * shall stop. */ #define VINF_EM_TERMINATE 1100 /** Hypervisor code was stepped. * EM will first send this to the debugger, and if the issue isn't * resolved there it will enter guru meditation. */ #define VINF_EM_DBG_HYPER_STEPPED 1101 /** Hit a breakpoint in the hypervisor code, * EM will first send this to the debugger, and if the issue isn't * resolved there it will enter guru meditation. */ #define VINF_EM_DBG_HYPER_BREAKPOINT 1102 /** Hit a possible assertion in the hypervisor code, * EM will first send this to the debugger, and if the issue isn't * resolved there it will enter guru meditation. */ #define VINF_EM_DBG_HYPER_ASSERTION 1103 /** Indicating that the VM should be suspended for debugging because * the developer wants to inspect the VM state. */ #define VINF_EM_DBG_STOP 1105 /** Indicating success single stepping and that EM should report that * event to the debugger. */ #define VINF_EM_DBG_STEPPED 1106 /** Indicating that a breakpoint was hit and that EM should notify the debugger * and in the event there is no debugger fail fatally. */ #define VINF_EM_DBG_BREAKPOINT 1107 /** Indicating that EM should single step an instruction. * The instruction is stepped in the current execution mode (RAW/REM). */ #define VINF_EM_DBG_STEP 1108 /** Indicating that the VM is being turned off and that the EM should * exit to the VM awaiting the destruction request. */ #define VINF_EM_OFF 1109 /** Indicating that the VM has been suspended and that the the thread * should wait for request telling it what to do next. */ #define VINF_EM_SUSPEND 1110 /** Indicating that the VM has been reset and that scheduling goes * back to startup defaults. */ #define VINF_EM_RESET 1111 /** Indicating that the VM has executed a halt instruction and that * the emulation thread should wait for an interrupt before resuming * execution. */ #define VINF_EM_HALT 1112 /** Indicating that the VM has been resumed and that the thread should * start executing. */ #define VINF_EM_RESUME 1113 /** Indicating that we've got an out-of-memory condition and that we need * to take the appropriate actions to deal with this. * @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT, * VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are * vital to correctly operating the VM. Also, they can't normally occur together * with an out-of-memory condition, and even if that should happen the condition * will be rediscovered before executing any more code. */ #define VINF_EM_NO_MEMORY 1114 /** The fatal variant of VINF_EM_NO_MEMORY. */ #define VERR_EM_NO_MEMORY (-1114) /** Indicating that a rescheduling to recompiled execution. * Typically caused by raw-mode executing code which is difficult/slow * to virtualize rawly. * @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */ #define VINF_EM_RESCHEDULE_REM 1115 /** Indicating that a rescheduling to vmx-mode execution. * Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible. */ #define VINF_EM_RESCHEDULE_HWACC 1116 /** Indicating that a rescheduling to raw-mode execution. * Typically caused by REM detecting that raw-mode execution is possible. * @remarks Important to have a higher priority (lower number) than VINF_EM_RESCHEDULE. */ #define VINF_EM_RESCHEDULE_RAW 1117 /** Indicating that a rescheduling now is required. Typically caused by * interrupts having changed the EIP. */ #define VINF_EM_RESCHEDULE 1118 /** PARAV call */ #define VINF_EM_RESCHEDULE_PARAV 1119 /** Go back into wait for SIPI mode */ #define VINF_EM_WAIT_SIPI 1120 /** Last scheduling related status code. (inclusive) */ #define VINF_EM_LAST 1120 /** Reason for leaving GC: Guest trap which couldn't be handled in GC. * The trap is generally forwared to the REM and executed there. */ #define VINF_EM_RAW_GUEST_TRAP 1121 /** Reason for leaving GC: Interrupted by external interrupt. * The interrupt needed to be handled by the host OS. */ #define VINF_EM_RAW_INTERRUPT 1122 /** Reason for leaving GC: Interrupted by external interrupt while in hypervisor code. * The interrupt needed to be handled by the host OS and hypervisor execution must be * resumed. VM state is not complete at this point. */ #define VINF_EM_RAW_INTERRUPT_HYPER 1123 /** Reason for leaving GC: A Ring switch was attempted. * Normal cause of action is to execute this in REM. */ #define VINF_EM_RAW_RING_SWITCH 1124 /** Reason for leaving GC: A Ring switch was attempted using software interrupt. * Normal cause of action is to execute this in REM. */ #define VINF_EM_RAW_RING_SWITCH_INT 1125 /** Reason for leaving GC: A privileged instruction was attempted executed. * Normal cause of action is to execute this in REM. */ #define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1126 /** Reason for leaving GC: Emulate instruction. */ #define VINF_EM_RAW_EMULATE_INSTR 1127 /** Reason for leaving GC: Unhandled TSS write. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1128 /** Reason for leaving GC: Unhandled LDT write. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1129 /** Reason for leaving GC: Unhandled IDT write. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1130 /** Reason for leaving GC: Unhandled GDT write. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1131 /** Reason for leaving GC: Unhandled Page Directory write. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_PD_FAULT 1132 /** Reason for leaving GC: jump inside generated patch jump. * Fatal error. */ #define VERR_EM_RAW_PATCH_CONFLICT (-1133) /** Reason for leaving GC: Hlt instruction. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_HLT 1134 /** Reason for leaving GC: Ring-3 operation pending. */ #define VINF_EM_RAW_TO_R3 1135 /** Reason for leaving GC: Timer pending. */ #define VINF_EM_RAW_TIMER_PENDING 1136 /** Reason for leaving GC: Interrupt pending (guest). */ #define VINF_EM_RAW_INTERRUPT_PENDING 1137 /** Reason for leaving GC: Encountered a stale selector. */ #define VINF_EM_RAW_STALE_SELECTOR 1138 /** Reason for leaving GC: The IRET resuming guest code trapped. */ #define VINF_EM_RAW_IRET_TRAP 1139 /** Reason for leaving GC: Emulate (MM)IO intensive code in the recompiler. */ #define VINF_EM_RAW_EMULATE_IO_BLOCK 1140 /** The interpreter was unable to deal with the instruction at hand. */ #define VERR_EM_INTERPRETER (-1148) /** Internal EM error caused by an unknown warning or informational status code. */ #define VERR_EM_INTERNAL_ERROR (-1149) /** Pending VM request packet. */ #define VINF_EM_PENDING_REQUEST 1150 /** Start instruction stepping (debug only). */ #define VINF_EM_RAW_EMULATE_DBG_STEP 1151 /** Patch TPR access instruction. */ #define VINF_EM_HWACCM_PATCH_TPR_INSTR 1152 /** @} */ /** @name Debugging Facility (DBGF) DBGF Status Codes * @{ */ /** The function called requires the caller to be attached as a * debugger to the VM. */ #define VERR_DBGF_NOT_ATTACHED (-1200) /** Someone (including the caller) was already attached as * debugger to the VM. */ #define VERR_DBGF_ALREADY_ATTACHED (-1201) /** Tried to hald a debugger which was already halted. * (This is a warning and not an error.) */ #define VWRN_DBGF_ALREADY_HALTED 1202 /** The DBGF has no more free breakpoint slots. */ #define VERR_DBGF_NO_MORE_BP_SLOTS (-1203) /** The DBGF couldn't find the specified breakpoint. */ #define VERR_DBGF_BP_NOT_FOUND (-1204) /** Attempted to enabled a breakpoint which was already enabled. */ #define VINF_DBGF_BP_ALREADY_ENABLED 1205 /** Attempted to disabled a breakpoint which was already disabled. */ #define VINF_DBGF_BP_ALREADY_DISABLED 1206 /** The breakpoint already exists. */ #define VINF_DBGF_BP_ALREADY_EXIST 1207 /** The byte string was not found. */ #define VERR_DBGF_MEM_NOT_FOUND (-1208) /** The OS was not detected. */ #define VERR_DBGF_OS_NOT_DETCTED (-1209) /** The OS was not detected. */ #define VINF_DBGF_OS_NOT_DETCTED 1209 /** @} */ /** @name Patch Manager (PATM) Status Codes * @{ */ /** Non fatal Patch Manager analysis phase warning */ #define VWRN_CONTINUE_ANALYSIS 1400 /** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */ #define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS /** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */ #define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS /** Patch installation refused (patch too complex or unsupported instructions ) */ #define VERR_PATCHING_REFUSED (-1401) /** Unable to find patch */ #define VERR_PATCH_NOT_FOUND (-1402) /** Patch disabled */ #define VERR_PATCH_DISABLED (-1403) /** Patch enabled */ #define VWRN_PATCH_ENABLED 1404 /** Patch was already disabled */ #define VERR_PATCH_ALREADY_DISABLED (-1405) /** Patch was already enabled */ #define VERR_PATCH_ALREADY_ENABLED (-1406) /** Patch was removed. */ #define VWRN_PATCH_REMOVED 1407 /** Reason for leaving GC: \#GP with EIP pointing to patch code. */ #define VINF_PATM_PATCH_TRAP_GP 1408 /** First leave GC code. */ #define VINF_PATM_LEAVEGC_FIRST VINF_PATM_PATCH_TRAP_GP /** Reason for leaving GC: \#PF with EIP pointing to patch code. */ #define VINF_PATM_PATCH_TRAP_PF 1409 /** Reason for leaving GC: int3 with EIP pointing to patch code. */ #define VINF_PATM_PATCH_INT3 1410 /** Reason for leaving GC: \#PF for monitored patch page. */ #define VINF_PATM_CHECK_PATCH_PAGE 1411 /** Reason for leaving GC: duplicate instruction called at current eip. */ #define VINF_PATM_DUPLICATE_FUNCTION 1412 /** Execute one instruction with the recompiler */ #define VINF_PATCH_EMULATE_INSTR 1413 /** Reason for leaving GC: attempt to patch MMIO write. */ #define VINF_PATM_HC_MMIO_PATCH_WRITE 1414 /** Reason for leaving GC: attempt to patch MMIO read. */ #define VINF_PATM_HC_MMIO_PATCH_READ 1415 /** Reason for leaving GC: pending irq after iret that sets IF. */ #define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416 /** Last leave GC code. */ #define VINF_PATM_LEAVEGC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET /** No conflicts to resolve */ #define VERR_PATCH_NO_CONFLICT (-1425) /** Detected unsafe code for patching */ #define VERR_PATM_UNSAFE_CODE (-1426) /** Terminate search branch */ #define VWRN_PATCH_END_BRANCH 1427 /** Already patched */ #define VERR_PATM_ALREADY_PATCHED (-1428) /** Spinlock detection failed. */ #define VINF_PATM_SPINLOCK_FAILED (1429) /** Continue execution after patch trap. */ #define VINF_PATCH_CONTINUE (1430) /** @} */ /** @name Code Scanning and Analysis Manager (CSAM) Status Codes * @{ */ /** Trap not handled */ #define VWRN_CSAM_TRAP_NOT_HANDLED 1500 /** Patch installed */ #define VWRN_CSAM_INSTRUCTION_PATCHED 1501 /** Page record not found */ #define VWRN_CSAM_PAGE_NOT_FOUND 1502 /** Reason for leaving GC: CSAM wants perform a task in ring-3. */ #define VINF_CSAM_PENDING_ACTION 1503 /** @} */ /** @name Page Monitor/Manager (PGM) Status Codes * @{ */ /** Attempt to create a GC mapping which conflicts with an existing mapping. */ #define VERR_PGM_MAPPING_CONFLICT (-1600) /** The physical handler range has no corresponding RAM range. * If this is MMIO, see todo above the return. If not MMIO, then it's * someone else's fault... */ #define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601) /** Attempt to register an access handler for a virtual range of which a part * was already handled. */ #define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602) /** Attempt to register an access handler for a physical range of which a part * was already handled. */ #define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603) /** Invalid page directory specified to PGM. */ #define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604) /** Invalid GC physical address. */ #define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605) /** Invalid GC physical range. Usually used when a specified range crosses * a RAM region boundrary. */ #define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606) /** Specified access handler was not found. */ #define VERR_PGM_HANDLER_NOT_FOUND (-1607) /** Attempt to register a RAM range of which parts are already * covered by existing RAM ranges. */ #define VERR_PGM_RAM_CONFLICT (-1608) /** Failed to add new mappings because the current mappings are fixed * in guest os memory. */ #define VERR_PGM_MAPPINGS_FIXED (-1609) /** Failed to fix mappings because of a conflict with the intermediate code. */ #define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610) /** Failed to fix mappings because a mapping rejected the address. */ #define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611) /** Failed to fix mappings because the proposed memory area was to small. */ #define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612) /** Reason for leaving GC: The urge to syncing CR3. */ #define VINF_PGM_SYNC_CR3 1613 /** Page not marked for dirty bit tracking */ #define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614 /** Page fault caused by dirty bit tracking; corrected */ #define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615 /** Go ahead with the default Read/Write operation. * This is returned by a HC physical or virtual handler when it wants the PGMPhys[Read|Write] * routine do the reading/writing. */ #define VINF_PGM_HANDLER_DO_DEFAULT 1616 /** The paging mode of the host is not supported yet. */ #define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617) /** The physical guest page is a reserved/mmio page and does not have any HC address. */ #define VERR_PGM_PHYS_PAGE_RESERVED (-1618) /** No page directory available for the hypervisor. */ #define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619) /** The shadow page pool was flushed. * This means that a global CR3 sync was flagged. Anyone receiving this kind of status * will have to get down to a SyncCR3 ASAP. See also VINF_PGM_SYNC_CR3. */ #define VERR_PGM_POOL_FLUSHED (-1620) /** The shadow page pool was cleared. * This is a error code internal to the shadow page pool, it will be * converted to a VERR_PGM_POOL_FLUSHED before leaving the pool code. */ #define VERR_PGM_POOL_CLEARED (-1621) /** The returned shadow page is cached. */ #define VINF_PGM_CACHED_PAGE 1622 /** Returned by handler registration, modification and deregistration * when the shadow PTs could be updated because the guest page * aliased or/and mapped by multiple PTs. */ #define VINF_PGM_GCPHYS_ALIASED 1623 /** Reason for leaving GC: Paging mode changed. * PGMChangeMode() uses this to force a switch to HC so it can safely * deal with a mode switch. */ #define VINF_PGM_CHANGE_MODE 1624 /** SyncPage modified the PDE. * This is an internal status code used to communicate back to the \#PF handler * that the PDE was (probably) marked not-present and it should restart the instruction. */ #define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625 /** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */ #define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626) /** Conflict between the core memory and the intermediate paging context, try again. * There are some very special conditions applying to the intermediate paging context * (used during the world switches), and some times we continuously run into these * when asking the host kernel for memory during VM init. Let us know if you run into * this and we'll adjust the code so it tries harder to avoid it. */ #define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627) /** The shadow paging mode is not supported yet. */ #define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628) /** The dynamic mapping cache for physical memory failed. */ #define VERR_PGM_DYNMAP_FAILED (-1629) /** The auto usage cache for the dynamic mapping set is full. */ #define VERR_PGM_DYNMAP_FULL_SET (-1630) /** The initialization of the dynamic mapping cache failed. */ #define VERR_PGM_DYNMAP_SETUP_ERROR (-1631) /** The expanding of the dynamic mapping cache failed. */ #define VERR_PGM_DYNMAP_EXPAND_ERROR (-1632) /** The page is unassigned (akin to VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS). */ #define VERR_PGM_PHYS_TLB_UNASSIGNED (-1633) /** Catch any access and route it thru PGM. */ #define VERR_PGM_PHYS_TLB_CATCH_ALL (-1634) /** Catch write access and route it thru PGM. */ #define VINF_PGM_PHYS_TLB_CATCH_WRITE 1635 /** No CR3 root shadow page table.. */ #define VERR_PGM_NO_CR3_SHADOW_ROOT (-1636) /** Trying to free a page with an invalid Page ID. */ #define VERR_PGM_PHYS_INVALID_PAGE_ID (-1637) /** PGMPhysWrite/Read hit a handler in Ring-0 or raw-mode context. */ #define VERR_PGM_PHYS_WR_HIT_HANDLER (-1638) /** Trying to free a page that isn't RAM. */ #define VERR_PGM_PHYS_NOT_RAM (-1639) /** Not ROM page. */ #define VERR_PGM_PHYS_NOT_ROM (-1640) /** Not MMIO page. */ #define VERR_PGM_PHYS_NOT_MMIO (-1641) /** Not MMIO2 page. */ #define VERR_PGM_PHYS_NOT_MMIO2 (-1642) /** Already aliased to a different page. */ #define VERR_PGM_HANDLER_ALREADY_ALIASED (-1643) /** Already aliased to the same page. */ #define VINF_PGM_HANDLER_ALREADY_ALIASED (1643) /** PGM pool flush pending - return to ring 3. */ #define VINF_PGM_POOL_FLUSH_PENDING (1644) /** Unable to use the range for a large page. */ #define VERR_PGM_INVALID_LARGE_PAGE_RANGE (-1645) /** Don't mess around with ballooned pages. */ #define VERR_PGM_PHYS_PAGE_BALLOONED (-1646) /** @} */ /** @name Memory Monitor (MM) Status Codes * @{ */ /** Attempt to register a RAM range of which parts are already * covered by existing RAM ranges. */ #define VERR_MM_RAM_CONFLICT (-1700) /** Hypervisor memory allocation failed. */ #define VERR_MM_HYPER_NO_MEMORY (-1701) /** @} */ /** @name Save State Manager (SSM) Status Codes * @{ */ /** The specified data unit already exist. */ #define VERR_SSM_UNIT_EXISTS (-1800) /** The specified data unit wasn't found. */ #define VERR_SSM_UNIT_NOT_FOUND (-1801) /** The specified data unit wasn't owned by caller. */ #define VERR_SSM_UNIT_NOT_OWNER (-1802) /** General saved state file integrity error. */ #define VERR_SSM_INTEGRITY (-1810) /** The saved state file magic was not recognized. */ #define VERR_SSM_INTEGRITY_MAGIC (-1811) /** The saved state file version is not supported. */ #define VERR_SSM_INTEGRITY_VERSION (-1812) /** The saved state file size didn't match the one in the header. */ #define VERR_SSM_INTEGRITY_SIZE (-1813) /** The CRC of the saved state file did not match. */ #define VERR_SSM_INTEGRITY_CRC (-1814) /** The machine uuid field wasn't null. */ #define VERR_SMM_INTEGRITY_MACHINE (-1815) /** Saved state header integrity error. */ #define VERR_SSM_INTEGRITY_HEADER (-1816) /** Unit header integrity error. */ #define VERR_SSM_INTEGRITY_UNIT (-1817) /** Invalid unit magic (internal data tag). */ #define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1818) /** The file contained a data unit which no-one wants. */ #define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1819) /** Incorrect version numbers in the header. */ #define VERR_SSM_INTEGRITY_VBOX_VERSION (-1820) /** Footer integrity error. */ #define VERR_SSM_INTEGRITY_FOOTER (-1821) /** Record header integrity error. */ #define VERR_SSM_INTEGRITY_REC_HDR (-1822) /** Termination record integrity error. */ #define VERR_SSM_INTEGRITY_REC_TERM (-1823) /** Termination record CRC mismatch. */ #define VERR_SSM_INTEGRITY_REC_TERM_CRC (-1824) /** Decompression interity error. */ #define VERR_SSM_INTEGRITY_DECOMPRESSION (-1825) /** Saved state directory iintegrity error. */ #define VERR_SSM_INTEGRITY_DIR (-1826) /** The saved state directory magic is wrong. */ #define VERR_SSM_INTEGRITY_DIR_MAGIC (-1827) /** A data unit in the saved state file was defined but didn't any * routine for processing it. */ #define VERR_SSM_NO_LOAD_EXEC (-1830) /** A restore routine attempted to load more data then the unit contained. */ #define VERR_SSM_LOADED_TOO_MUCH (-1831) /** Not in the correct state for the attempted operation. */ #define VERR_SSM_INVALID_STATE (-1832) /** Not in the correct state for the attempted operation. */ #define VERR_SSM_LOADED_TOO_LITTLE (-1833) /** Unsupported data unit version. * A SSM user returns this if it doesn't know the u32Version. */ #define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1840) /** The format of a data unit has changed. * A SSM user returns this if it's not able to read the format for * other reasons than u32Version. */ #define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1841) /** The CPUID instruction returns different information when loading than when saved. * Normally caused by hardware changes on the host, but could also be caused by * changes in the BIOS setup. */ #define VERR_SSM_LOAD_CPUID_MISMATCH (-1842) /** The RAM size differes between the saved state and the VM config. */ #define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1843) /** The state doesn't match the VM configuration in one or another way. * (There are certain PCI reconfiguration which the OS could potentially * do which can cause this problem. Check this out when it happens.) */ #define VERR_SSM_LOAD_CONFIG_MISMATCH (-1844) /** The virtual clock freqency differs too much. * The clock source for the virtual time isn't reliable or the code have changed. */ #define VERR_SSM_VIRTUAL_CLOCK_HZ (-1845) /** A timeout occured while waiting for async IDE operations to finish. */ #define VERR_SSM_IDE_ASYNC_TIMEOUT (-1846) /** One of the structure magics was wrong. */ #define VERR_SSM_STRUCTURE_MAGIC (-1847) /** The data in the saved state doesn't conform to expectations. */ #define VERR_SSM_UNEXPECTED_DATA (-1848) /** Trying to read a 64-bit guest physical address into a 32-bit variable. */ #define VERR_SSM_GCPHYS_OVERFLOW (-1849) /** Trying to read a 64-bit guest virtual address into a 32-bit variable. */ #define VERR_SSM_GCPTR_OVERFLOW (-1850) /** Vote for another pass. */ #define VINF_SSM_VOTE_FOR_ANOTHER_PASS 1851 /** Vote for done tell SSM not to call again until the final pass. */ #define VINF_SSM_VOTE_DONE_DONT_CALL_AGAIN 1852 /** Vote for giving up. */ #define VERR_SSM_VOTE_FOR_GIVING_UP (-1853) /** Don't call again until the final pass. */ #define VINF_SSM_DONT_CALL_AGAIN 1854 /** Giving up a live snapshot/teleportation attempt because of too many * passes. */ #define VERR_SSM_TOO_MANY_PASSES (-1855) /** Giving up a live snapshot/teleportation attempt because the state grew to * big. */ #define VERR_SSM_STATE_GREW_TOO_BIG (-1856) /** Giving up a live snapshot attempt because we're low on disk space. */ #define VERR_SSM_LOW_ON_DISK_SPACE (-1857) /** The operation was cancelled. */ #define VERR_SSM_CANCELLED (-1858) /** Nothing that can be cancelled. */ #define VERR_SSM_NO_PENDING_OPERATION (-1859) /** The operation has already been cancelled. */ #define VERR_SSM_ALREADY_CANCELLED (-1860) /** The machine was powered off while saving. */ #define VERR_SSM_LIVE_POWERED_OFF (-1861) /** The live snapshot/teleportation operation was aborted because of a guru * meditation. */ #define VERR_SSM_LIVE_GURU_MEDITATION (-1862) /** The live snapshot/teleportation operation was aborted because of a fatal * runtime error. */ #define VERR_SSM_LIVE_FATAL_ERROR (-1863) /** The VM was suspended before or while saving, don't resume execution. */ #define VINF_SSM_LIVE_SUSPENDED 1864 /** Complex SSM field fed to SSMR3PutStruct or SSMR3GetStruct. Use the * extended API. */ #define VERR_SSM_FIELD_COMPLEX (-1864) /** Invalid size of a SSM field with the specified transformation. */ #define VERR_SSM_FIELD_INVALID_SIZE (-1865) /** The specified field is outside the structure. */ #define VERR_SSM_FIELD_OUT_OF_BOUNDS (-1866) /** The field does not follow immediately the previous one. */ #define VERR_SSM_FIELD_NOT_CONSECUTIVE (-1867) /** The field contains an invalid callback or transformation index. */ #define VERR_SSM_FIELD_INVALID_CALLBACK (-1868) /** The field contains an invalid padding size. */ #define VERR_SSM_FIELD_INVALID_PADDING_SIZE (-1869) /** The field contains a value that is out of range. */ #define VERR_SSM_FIELD_INVALID_VALUE (-1870) /** @} */ /** @name Virtual Machine (VM) Status Codes * @{ */ /** The specified at reset handler wasn't found. */ #define VERR_VM_ATRESET_NOT_FOUND (-1900) /** Invalid VM request type. * For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For * all the other occurences it means indicates corruption, broken logic, or stupid * interface user. */ #define VERR_VM_REQUEST_INVALID_TYPE (-1901) /** Invalid VM request state. * The state of the request packet was not the expected and accepted one(s). Either * the interface user screwed up, or we've got corruption/broken logic. */ #define VERR_VM_REQUEST_STATE (-1902) /** Invalid VM request packet. * One or more of the the VM controlled packet members didn't contain the correct * values. Some thing's broken. */ #define VERR_VM_REQUEST_INVALID_PACKAGE (-1903) /** The status field has not been updated yet as the request is still * pending completion. Someone queried the iStatus field before the request * has been fully processed. */ #define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904) /** The request has been freed, don't read the status now. * Someone is reading the iStatus field of a freed request packet. */ #define VERR_VM_REQUEST_STATUS_FREED (-1905) /** A VM api requiring EMT was called from another thread. * Use the VMR3ReqCall() apis to call it! */ #define VERR_VM_THREAD_NOT_EMT (-1906) /** The VM state was invalid for the requested operation. * Go check the 'VM Statechart Diagram.gif'. */ #define VERR_VM_INVALID_VM_STATE (-1907) /** The support driver is not installed. * On linux, open returned ENOENT. */ #define VERR_VM_DRIVER_NOT_INSTALLED (-1908) /** The support driver is not accessible. * On linux, open returned EPERM. */ #define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909) /** Was not able to load the support driver. * On linux, open returned ENODEV. */ #define VERR_VM_DRIVER_LOAD_ERROR (-1910) /** Was not able to open the support driver. * Generic open error used when none of the other ones fit. */ #define VERR_VM_DRIVER_OPEN_ERROR (-1911) /** The installed support driver doesn't match the version of the user. */ #define VERR_VM_DRIVER_VERSION_MISMATCH (-1912) /** Saving the VM state is temporarily not allowed. Try again later. */ #define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913) /** @} */ /** @name VBox Remote Desktop Protocol (VRDP) Status Codes * @{ */ /** Successful completion of operation (mapped to generic iprt status code). */ #define VINF_VRDP_SUCCESS VINF_SUCCESS /** VRDP transport operation timed out (mapped to generic iprt status code). */ #define VERR_VRDP_TIMEOUT VERR_TIMEOUT /** Unsupported ISO protocol feature */ #define VERR_VRDP_ISO_UNSUPPORTED (-2000) /** Security (en/decryption) engine error */ #define VERR_VRDP_SEC_ENGINE_FAIL (-2001) /** VRDP protocol violation */ #define VERR_VRDP_PROTOCOL_ERROR (-2002) /** Unsupported VRDP protocol feature */ #define VERR_VRDP_NOT_SUPPORTED (-2003) /** VRDP protocol violation, client sends less data than expected */ #define VERR_VRDP_INSUFFICIENT_DATA (-2004) /** Internal error, VRDP packet is in wrong operation mode */ #define VERR_VRDP_INVALID_MODE (-2005) /** Memory allocation failed */ #define VERR_VRDP_NO_MEMORY (-2006) /** Client has been rejected */ #define VERR_VRDP_ACCESS_DENIED (-2007) /** VRPD receives a packet that is not supported */ #define VWRN_VRDP_PDU_NOT_SUPPORTED 2008 /** VRDP script allowed the packet to be processed further */ #define VINF_VRDP_PROCESS_PDU 2009 /** VRDP script has completed its task */ #define VINF_VRDP_OPERATION_COMPLETED 2010 /** VRDP thread has started OK and will run */ #define VINF_VRDP_THREAD_STARTED 2011 /** Framebuffer is resized, terminate send bitmap procedure */ #define VINF_VRDP_RESIZE_REQUESTED 2012 /** Output can be enabled for the client. */ #define VINF_VRDP_OUTPUT_ENABLE 2013 /** @} */ /** @name Configuration Manager (CFGM) Status Codes * @{ */ /** The integer value was too big for the requested representation. */ #define VERR_CFGM_INTEGER_TOO_BIG (-2100) /** Child node was not found. */ #define VERR_CFGM_CHILD_NOT_FOUND (-2101) /** Path to child node was invalid (i.e. empty). */ #define VERR_CFGM_INVALID_CHILD_PATH (-2102) /** Value not found. */ #define VERR_CFGM_VALUE_NOT_FOUND (-2103) /** No parent node specified. */ #define VERR_CFGM_NO_PARENT (-2104) /** No node was specified. */ #define VERR_CFGM_NO_NODE (-2105) /** The value is not an integer. */ #define VERR_CFGM_NOT_INTEGER (-2106) /** The value is not a zero terminated character string. */ #define VERR_CFGM_NOT_STRING (-2107) /** The value is not a byte string. */ #define VERR_CFGM_NOT_BYTES (-2108) /** The specified string / bytes buffer was to small. Specify a larger one and retry. */ #define VERR_CFGM_NOT_ENOUGH_SPACE (-2109) /** The path of a new node contained slashs or was empty. */ #define VERR_CFGM_INVALID_NODE_PATH (-2160) /** A new node couldn't be inserted because one with the same name exists. */ #define VERR_CFGM_NODE_EXISTS (-2161) /** A new leaf couldn't be inserted because one with the same name exists. */ #define VERR_CFGM_LEAF_EXISTS (-2162) /** An unknown config value was encountered. */ #define VERR_CFGM_CONFIG_UNKNOWN_VALUE (-2163) /** An unknown config node (key) was encountered. */ #define VERR_CFGM_CONFIG_UNKNOWN_NODE (-2164) /** @} */ /** @name Time Manager (TM) Status Codes * @{ */ /** The loaded timer state was incorrect. */ #define VERR_TM_LOAD_STATE (-2200) /** The timer was not in the correct state for the request operation. */ #define VERR_TM_INVALID_STATE (-2201) /** The timer was in a unknown state. Corruption or stupid coding error. */ #define VERR_TM_UNKNOWN_STATE (-2202) /** The timer was stuck in an unstable state until we grew impatient and returned. */ #define VERR_TM_UNSTABLE_STATE (-2203) /** @} */ /** @name Recompiled Execution Manager (REM) Status Codes * @{ */ /** Fatal error in virtual hardware. */ #define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300) /** Fatal error in the recompiler cpu. */ #define VERR_REM_VIRTUAL_CPU_ERROR (-2301) /** Recompiler execution was interrupted by forced action. */ #define VINF_REM_INTERRUPED_FF 2302 /** Too many similar traps. This is a very useful debug only * check (we don't do double/tripple faults in REM). */ #define VERR_REM_TOO_MANY_TRAPS (-2304) /** The REM is out of breakpoint slots. */ #define VERR_REM_NO_MORE_BP_SLOTS (-2305) /** The REM could not find any breakpoint on the specified address. */ #define VERR_REM_BP_NOT_FOUND (-2306) /** @} */ /** @name Trap Manager / Monitor (TRPM) Status Codes * @{ */ /** No active trap. Cannot query or reset a non-existing trap. */ #define VERR_TRPM_NO_ACTIVE_TRAP (-2400) /** Active trap. Cannot assert a new trap when when one is already active. */ #define VERR_TRPM_ACTIVE_TRAP (-2401) /** Reason for leaving GC: Guest tried to write to our IDT - fatal. * The VM will be terminated assuming the worst, i.e. that the * guest has read the idtr register. */ #define VERR_TRPM_SHADOW_IDT_WRITE (-2402) /** Reason for leaving GC: Fatal trap in hypervisor. */ #define VERR_TRPM_DONT_PANIC (-2403) /** Reason for leaving GC: Double Fault. */ #define VERR_TRPM_PANIC (-2404) /** The exception was dispatched for raw-mode execution. */ #define VINF_TRPM_XCPT_DISPATCHED 2405 /** @} */ /** @name Selector Manager / Monitor (SELM) Status Code * @{ */ /** Reason for leaving GC: Guest tried to write to our GDT - fatal. * The VM will be terminated assuming the worst, i.e. that the * guest has read the gdtr register. */ #define VERR_SELM_SHADOW_GDT_WRITE (-2500) /** Reason for leaving GC: Guest tried to write to our LDT - fatal. * The VM will be terminated assuming the worst, i.e. that the * guest has read the ldtr register. */ #define VERR_SELM_SHADOW_LDT_WRITE (-2501) /** Reason for leaving GC: Guest tried to write to our TSS - fatal. * The VM will be terminated assuming the worst, i.e. that the * guest has read the ltr register. */ #define VERR_SELM_SHADOW_TSS_WRITE (-2502) /** Reason for leaving GC: Sync the GDT table to solve a conflict. */ #define VINF_SELM_SYNC_GDT 2503 /** No valid TSS present. */ #define VERR_SELM_NO_TSS (-2504) /** @} */ /** @name I/O Manager / Monitor (IOM) Status Code * @{ */ /** The specified I/O port range was invalid. * It was either empty or it was out of bounds. */ #define VERR_IOM_INVALID_IOPORT_RANGE (-2600) /** The specified GC I/O port range didn't have a corresponding HC range. * IOMIOPortRegisterHC() must be called before IOMIOPortRegisterGC(). */ #define VERR_IOM_NO_HC_IOPORT_RANGE (-2601) /** The specified I/O port range intruded on an existing range. There is * a I/O port conflict between two device, or a device tried to register * the same range twice. */ #define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602) /** The I/O port range specified for removal wasn't found or it wasn't contiguous. */ #define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603) /** The specified I/O port range was owned by some other device(s). Both registration * and deregistration, but in the first case only GC ranges. */ #define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604) /** The specified MMIO range was invalid. * It was either empty or it was out of bounds. */ #define VERR_IOM_INVALID_MMIO_RANGE (-2605) /** The specified GC MMIO range didn't have a corresponding HC range. * IOMMMIORegisterHC() must be called before IOMMMIORegisterGC(). */ #define VERR_IOM_NO_HC_MMIO_RANGE (-2606) /** The specified MMIO range was owned by some other device(s). Both registration * and deregistration, but in the first case only GC ranges. */ #define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607) /** The specified MMIO range intruded on an existing range. There is * a MMIO conflict between two device, or a device tried to register * the same range twice. */ #define VERR_IOM_MMIO_RANGE_CONFLICT (-2608) /** The MMIO range specified for removal was not found. */ #define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609) /** The MMIO range specified for removal was invalid. The range didn't match * quite match a set of existing ranges. It's not possible to remove parts of * a MMIO range, only one or more full ranges. */ #define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610) /** An invalid I/O port size was specified for a read or write operation. */ #define VERR_IOM_INVALID_IOPORT_SIZE (-2611) /** The MMIO handler was called for a bogus address! Internal error! */ #define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612) /** The MMIO handler experienced a problem with the disassembler. */ #define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613) /** The port being read was not present(/unused) and IOM shall return ~0 according to size. */ #define VERR_IOM_IOPORT_UNUSED (-2614) /** Unused MMIO register read, fill with 00. */ #define VINF_IOM_MMIO_UNUSED_00 2615 /** Unused MMIO register read, fill with FF. */ #define VINF_IOM_MMIO_UNUSED_FF 2616 /** Reason for leaving GC: I/O port read. */ #define VINF_IOM_HC_IOPORT_READ 2620 /** Reason for leaving GC: I/O port write. */ #define VINF_IOM_HC_IOPORT_WRITE 2621 /** Reason for leaving GC: MMIO write. */ #define VINF_IOM_HC_MMIO_READ 2623 /** Reason for leaving GC: MMIO read. */ #define VINF_IOM_HC_MMIO_WRITE 2624 /** Reason for leaving GC: MMIO read/write. */ #define VINF_IOM_HC_MMIO_READ_WRITE 2625 /** @} */ /** @name Virtual Machine Monitor (VMM) Status Codes * @{ */ /** Reason for leaving RZ: Calling host function. */ #define VINF_VMM_CALL_HOST 2700 /** Reason for leaving R0: Hit a ring-0 assertion on EMT. */ #define VERR_VMM_RING0_ASSERTION (-2701) /** The hyper CR3 differs between PGM and CPUM. */ #define VERR_VMM_HYPER_CR3_MISMATCH (-2702) /** Reason for leaving RZ: Illegal call to ring-3. */ #define VERR_VMM_RING3_CALL_DISABLED (-2703) /** @} */ /** @name Pluggable Device and Driver Manager (PDM) Status Codes * @{ */ /** An invalid LUN specification was given. */ #define VERR_PDM_NO_SUCH_LUN (-2800) /** A device encountered an unknown configuration value. * This means that the device is potentially misconfigured and the device * construction or unit attachment failed because of this. */ #define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801) /** The above driver doesn't export a interface required by a driver being * attached to it. Typical misconfiguration problem. */ #define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802) /** The below driver doesn't export a interface required by the drive * having attached it. Typical misconfiguration problem. */ #define VERR_PDM_MISSING_INTERFACE_BELOW (-2803) /** A device didn't find a required interface with an attached driver. * Typical misconfiguration problem. */ #define VERR_PDM_MISSING_INTERFACE (-2804) /** A driver encountered an unknown configuration value. * This means that the driver is potentially misconfigured and the driver * construction failed because of this. */ #define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805) /** The PCI bus assigned to a device didn't have room for it. * Either too many devices are configured on the same PCI bus, or there are * some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */ #define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806) /** A queue is out of free items, the queueing operation failed. */ #define VERR_PDM_NO_QUEUE_ITEMS (-2807) /** Not possible to attach further drivers to the driver. * A driver which doesn't support attachments (below of course) will * return this status code if it found that further drivers were configured * to be attached to it. */ #define VERR_PDM_DRVINS_NO_ATTACH (-2808) /** Not possible to attach drivers to the device. * A device which doesn't support attachments (below of course) will * return this status code if it found that drivers were configured * to be attached to it. */ #define VERR_PDM_DEVINS_NO_ATTACH (-2809) /** No attached driver. * The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return * this error when no driver was configured to be attached. */ #define VERR_PDM_NO_ATTACHED_DRIVER (-2810) /** The media geometry hasn't been set yet, so it cannot be obtained. * The caller should then calculate the geometry from the media size. */ #define VERR_PDM_GEOMETRY_NOT_SET (-2811) /** The media translation hasn't been set yet, so it cannot be obtained. * The caller should then guess the translation. */ #define VERR_PDM_TRANSLATION_NOT_SET (-2812) /** The media is not mounted, operation requires a mounted media. */ #define VERR_PDM_MEDIA_NOT_MOUNTED (-2813) /** Mount failed because a media was already mounted. Unmount the media * and retry the mount. */ #define VERR_PDM_MEDIA_MOUNTED (-2814) /** The media is locked and cannot be unmounted. */ #define VERR_PDM_MEDIA_LOCKED (-2815) /** No 'Type' attribute in the DrvBlock configuration. * Misconfiguration. */ #define VERR_PDM_BLOCK_NO_TYPE (-2816) /** The 'Type' attribute in the DrvBlock configuration had an unknown value. * Misconfiguration. */ #define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817) /** The 'Translation' attribute in the DrvBlock configuration had an unknown value. * Misconfiguration. */ #define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818) /** The block driver type wasn't supported. * Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */ #define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819) /** A attach or prepare mount call failed because the driver already * had a driver attached. */ #define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820) /** An attempt on deattaching a driver without anyone actually being attached, or * performing any other operation on an attached driver. */ #define VERR_PDM_NO_DRIVER_ATTACHED (-2821) /** The attached driver configuration is missing the 'Driver' attribute. */ #define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822) /** The configured driver wasn't found. * Either the necessary driver modules wasn't loaded, the name was * misspelled, or it was a misconfiguration. */ #define VERR_PDM_DRIVER_NOT_FOUND (-2823) /** The Ring-3 module was already loaded. */ #define VINF_PDM_ALREADY_LOADED (2824) /** The name of the module clashed with an existing module. */ #define VERR_PDM_MODULE_NAME_CLASH (-2825) /** Couldn't find any export for registration of drivers/devices. */ #define VERR_PDM_NO_REGISTRATION_EXPORT (-2826) /** A module name is too long. */ #define VERR_PDM_MODULE_NAME_TOO_LONG (-2827) /** Driver name clash. Another driver with the same name as the * one begin registred exists. */ #define VERR_PDM_DRIVER_NAME_CLASH (-2828) /** The version of the driver registration structure is unknown * to this VBox version. Either mixing incompatible versions or * the structure isn't correctly initialized. */ #define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829) /** Invalid entry in the driver registration structure. */ #define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830) /** Invalid host bit mask. */ #define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831) /** Not possible to detach a driver because the above driver/device * doesn't support it. The above entity doesn't implement the pfnDetach call. */ #define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832) /** No PCI Bus is available to register the device with. This is usually a * misconfiguration or in rare cases a buggy pci device. */ #define VERR_PDM_NO_PCI_BUS (-2833) /** The device is not a registered PCI device and thus cannot * perform any PCI operations. The device forgot to register it self. */ #define VERR_PDM_NOT_PCI_DEVICE (-2834) /** The version of the device registration structure is unknown * to this VBox version. Either mixing incompatible versions or * the structure isn't correctly initialized. */ #define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835) /** Invalid entry in the device registration structure. */ #define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836) /** Invalid host bit mask. */ #define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837) /** The guest bit mask didn't match the guest being loaded. */ #define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838) /** Device name clash. Another device with the same name as the * one begin registred exists. */ #define VERR_PDM_DEVICE_NAME_CLASH (-2839) /** The device wasn't found. There was no registered device * by that name. */ #define VERR_PDM_DEVICE_NOT_FOUND (-2840) /** The device instance was not found. */ #define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841) /** The device instance have no base interface. */ #define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842) /** The device instance have no such logical unit. */ #define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843) /** The driver instance could not be found. */ #define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844) /** Logical Unit was not found. */ #define VERR_PDM_LUN_NOT_FOUND (-2845) /** The Logical Unit was found, but it had no driver attached to it. */ #define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846) /** The Logical Unit was found, but it had no driver attached to it. */ #define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846 /** No PIC device instance is registered with the current VM and thus * the PIC operation cannot be performed. */ #define VERR_PDM_NO_PIC_INSTANCE (-2847) /** No APIC device instance is registered with the current VM and thus * the APIC operation cannot be performed. */ #define VERR_PDM_NO_APIC_INSTANCE (-2848) /** No DMAC device instance is registered with the current VM and thus * the DMA operation cannot be performed. */ #define VERR_PDM_NO_DMAC_INSTANCE (-2849) /** No RTC device instance is registered with the current VM and thus * the RTC or CMOS operation cannot be performed. */ #define VERR_PDM_NO_RTC_INSTANCE (-2850) /** Unable to open the host interface due to a sharing violation . */ #define VERR_PDM_HIF_SHARING_VIOLATION (-2851) /** Unable to open the host interface. */ #define VERR_PDM_HIF_OPEN_FAILED (-2852) /** The device doesn't support runtime driver attaching. * The PDMDEVREG::pfnAttach callback function is NULL. */ #define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853) /** The driver doesn't support runtime driver attaching. * The PDMDRVREG::pfnAttach callback function is NULL. */ #define VERR_PDM_DRIVER_NO_RT_ATTACH (-2854) /** Invalid host interface version. */ #define VERR_PDM_HIF_INVALID_VERSION (-2855) /** The version of the USB device registration structure is unknown * to this VBox version. Either mixing incompatible versions or * the structure isn't correctly initialized. */ #define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856) /** Invalid entry in the device registration structure. */ #define VERR_PDM_INVALID_USB_REGISTRATION (-2857) /** Driver name clash. Another driver with the same name as the * one begin registred exists. */ #define VERR_PDM_USB_NAME_CLASH (-2858) /** The USB hub is already registered. */ #define VERR_PDM_USB_HUB_EXISTS (-2859) /** Couldn't find any USB hubs to attach the device to. */ #define VERR_PDM_NO_USB_HUBS (-2860) /** Couldn't find any free USB ports to attach the device to. */ #define VERR_PDM_NO_USB_PORTS (-2861) /** Couldn't find the USB Proxy device. Using OSE? */ #define VERR_PDM_NO_USBPROXY (-2862) /** The async completion template is still used. */ #define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863) /** The async completion task is already suspended. */ #define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864) /** The async completion task is not suspended. */ #define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865) /** The driver properties were invalid, and as a consequence construction * failed. Caused my unusable media or similar problems. */ #define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866) /** Too many instances of a device. */ #define VERR_PDM_TOO_MANY_DEVICE_INSTANCES (-2867) /** Too many instances of a driver. */ #define VERR_PDM_TOO_MANY_DRIVER_INSTANCES (-2868) /** Too many instances of a usb device. */ #define VERR_PDM_TOO_MANY_USB_DEVICE_INSTANCES (-2869) /** @} */ /** @name Host-Guest Communication Manager (HGCM) Status Codes * @{ */ /** Requested service does not exist. */ #define VERR_HGCM_SERVICE_NOT_FOUND (-2900) /** Service rejected client connection */ #define VINF_HGCM_CLIENT_REJECTED 2901 /** Command address is invalid. */ #define VERR_HGCM_INVALID_CMD_ADDRESS (-2902) /** Service will execute the command in background. */ #define VINF_HGCM_ASYNC_EXECUTE 2903 /** HGCM could not perform requested operation because of an internal error. */ #define VERR_HGCM_INTERNAL (-2904) /** Invalid HGCM client id. */ #define VERR_HGCM_INVALID_CLIENT_ID (-2905) /** The HGCM is saving state. */ #define VINF_HGCM_SAVE_STATE (2906) /** Requested service already exists. */ #define VERR_HGCM_SERVICE_EXISTS (-2907) /** @} */ /** @name Network Address Translation Driver (DrvNAT) Status Codes * @{ */ /** Failed to find the DNS configured for this machine. */ #define VINF_NAT_DNS 3000 /** Failed to convert the specified Guest IP to a binary IP address. * Malformed input. */ #define VERR_NAT_REDIR_GUEST_IP (-3001) /** Failed while setting up a redirector rule. * There probably is a conflict between the rule and some existing * service on the computer. */ #define VERR_NAT_REDIR_SETUP (-3002) /** @} */ /** @name HostIF Driver (DrvTUN) Status Codes * @{ */ /** The Host Interface Networking init program failed. */ #define VERR_HOSTIF_INIT_FAILED (-3100) /** The Host Interface Networking device name is too long. */ #define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101) /** The Host Interface Networking name config IOCTL call failed. */ #define VERR_HOSTIF_IOCTL (-3102) /** Failed to make the Host Interface Networking handle non-blocking. */ #define VERR_HOSTIF_BLOCKING (-3103) /** If a Host Interface Networking filehandle was specified it's not allowed to * have any init or term programs. */ #define VERR_HOSTIF_FD_AND_INIT_TERM (-3104) /** The Host Interface Networking terminate program failed. */ #define VERR_HOSTIF_TERM_FAILED (-3105) /** @} */ /** @name VBox HDD Container (VD) Status Codes * @{ */ /** Invalid image type. */ #define VERR_VD_INVALID_TYPE (-3200) /** Operation can't be done in current HDD container state. */ #define VERR_VD_INVALID_STATE (-3201) /** Configuration value not found. */ #define VERR_VD_VALUE_NOT_FOUND (-3202) /** Virtual HDD is not opened. */ #define VERR_VD_NOT_OPENED (-3203) /** Requested image is not opened. */ #define VERR_VD_IMAGE_NOT_FOUND (-3204) /** Image is read-only. */ #define VERR_VD_IMAGE_READ_ONLY (-3205) /** Geometry hasn't been set. */ #define VERR_VD_GEOMETRY_NOT_SET (-3206) /** No data for this block in image. */ #define VERR_VD_BLOCK_FREE (-3207) /** Differencing and parent images can't be used together due to UUID. */ #define VERR_VD_UUID_MISMATCH (-3208) /** Asynchronous I/O request finished. */ #define VINF_VD_ASYNC_IO_FINISHED 3209 /** Asynchronous I/O is not finished yet. */ #define VERR_VD_ASYNC_IO_IN_PROGRESS (-3210) /** The image is too small or too large for this format. */ #define VERR_VD_INVALID_SIZE (-3211) /** Generic: Invalid image file header. Use this for plugins. */ #define VERR_VD_GEN_INVALID_HEADER (-3220) /** VDI: Invalid image file header. */ #define VERR_VD_VDI_INVALID_HEADER (-3230) /** VDI: Invalid image file header: invalid signature. */ #define VERR_VD_VDI_INVALID_SIGNATURE (-3231) /** VDI: Invalid image file header: invalid version. */ #define VERR_VD_VDI_UNSUPPORTED_VERSION (-3232) /** Comment string is too long. */ #define VERR_VD_VDI_COMMENT_TOO_LONG (-3233) /** VMDK: Invalid image file header. */ #define VERR_VD_VMDK_INVALID_HEADER (-3240) /** VMDK: Invalid image file header: invalid version. */ #define VERR_VD_VMDK_UNSUPPORTED_VERSION (-3241) /** VMDK: Image property not found. */ #define VERR_VD_VMDK_VALUE_NOT_FOUND (-3242) /** VMDK: Operation can't be done in current image state. */ #define VERR_VD_VMDK_INVALID_STATE (-3243) /** VMDK: Format is invalid/inconsistent. */ #define VERR_VD_VMDK_INVALID_FORMAT (-3244) /** VMDK: Invalid write position. */ #define VERR_VD_VMDK_INVALID_WRITE (-3245) /** iSCSI: Invalid header, i.e. dummy for validity check. */ #define VERR_VD_ISCSI_INVALID_HEADER (-3250) /** iSCSI: Configuration value is unknown. This indicates misconfiguration. */ #define VERR_VD_ISCSI_UNKNOWN_CFG_VALUES (-3251) /** iSCSI: Interface is unknown. This indicates misconfiguration. */ #define VERR_VD_ISCSI_UNKNOWN_INTERFACE (-3252) /** iSCSI: Operation can't be done in current image state. */ #define VERR_VD_ISCSI_INVALID_STATE (-3253) /** iSCSI: Invalid device type (not a disk). */ #define VERR_VD_ISCSI_INVALID_TYPE (-3254) /** VHD: Invalid image file header. */ #define VERR_VD_VHD_INVALID_HEADER (-3260) /** Raw: Invalid image file header. */ #define VERR_VD_RAW_INVALID_HEADER (-3270) /** Raw: Invalid image file type. */ #define VERR_VD_RAW_INVALID_TYPE (-3271) /** The backend needs more metadata before it can continue. */ #define VERR_VD_NOT_ENOUGH_METADATA (-3272) /** @} */ /** @name VBox Guest Library (VBGL) Status Codes * @{ */ /** Library was not initialized. */ #define VERR_VBGL_NOT_INITIALIZED (-3300) /** Virtual address was not allocated by the library. */ #define VERR_VBGL_INVALID_ADDR (-3301) /** IOCtl to VBoxGuest driver failed. */ #define VERR_VBGL_IOCTL_FAILED (-3302) /** @} */ /** @name VBox USB (VUSB) Status Codes * @{ */ /** No available ports on the hub. * This error is returned when a device is attempted created and/or attached * to a hub which is out of ports. */ #define VERR_VUSB_NO_PORTS (-3400) /** The requested operation cannot be performed on a detached USB device. */ #define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401) /** Failed to allocate memory for a URB. */ #define VERR_VUSB_NO_URB_MEMORY (-3402) /** General failure during URB queuing. * This will go away when the queueing gets proper status code handling. */ #define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403) /** Device creation failed because the USB device name was not found. */ #define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404) /** Not permitted to open the USB device. * The user doesn't have access to the device in the usbfs, check the mount options. */ #define VERR_VUSB_USBFS_PERMISSION (-3405) /** The requested operation cannot be performed because the device * is currently being reset. */ #define VERR_VUSB_DEVICE_IS_RESETTING (-3406) /** The requested operation cannot be performed because the device * is currently suspended. */ #define VERR_VUSB_DEVICE_IS_SUSPENDED (-3407) /** @} */ /** @name VBox VGA Status Codes * @{ */ /** One of the custom modes was incorrect. * The format or bit count of the custom mode value is invalid. */ #define VERR_VGA_INVALID_CUSTOM_MODE (-3500) /** The display connector is resizing. */ #define VINF_VGA_RESIZE_IN_PROGRESS (3501) /** @} */ /** @name Internal Networking Status Codes * @{ */ /** The networking interface to filter was not found. */ #define VERR_INTNET_FLT_IF_NOT_FOUND (-3600) /** The networking interface to filter was busy (used by someone). */ #define VERR_INTNET_FLT_IF_BUSY (-3601) /** Failed to create or connect to a networking interface filter. */ #define VERR_INTNET_FLT_IF_FAILED (-3602) /** The network already exists with a different trunk configuration. */ #define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603) /** The network already exists with a different security profile (restricted / public). */ #define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604) /** @} */ /** @name Support Driver Status Codes * @{ */ /** The component factory was not found. */ #define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700) /** The component factories do not support the requested interface. */ #define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701) /** The service module was not found. */ #define VERR_SUPDRV_SERVICE_NOT_FOUND (-3702) /** The host kernel is too old. */ #define VERR_SUPDRV_KERNEL_TOO_OLD_FOR_VTX (-3703) /** @} */ /** @name VBox GMM Status Codes * @{ */ /** The GMM is out of pages and needs to be give another chunk of user memory that * it can lock down and borrow pages from. */ #define VERR_GMM_SEED_ME (-3800) /** Unable to allocate more pages from the host system. */ #define VERR_GMM_OUT_OF_MEMORY (-3801) /** Hit the global allocation limit. * If you know there is still sufficient memory available, try raise the limit. */ #define VERR_GMM_HIT_GLOBAL_LIMIT (-3802) /** Hit the a VM account limit. */ #define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803) /** Attempt to free more memory than what was previously allocated. */ #define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804) /** Attempted to report too many pages as deflated. */ #define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805) /** The page to be freed or updated was not found. */ #define VERR_GMM_PAGE_NOT_FOUND (-3806) /** The specified shared page was not actually private. */ #define VERR_GMM_PAGE_NOT_PRIVATE (-3807) /** The specified shared page was not actually shared. */ #define VERR_GMM_PAGE_NOT_SHARED (-3808) /** The page to be freed was already freed. */ #define VERR_GMM_PAGE_ALREADY_FREE (-3809) /** The page to be updated or freed was noted owned by the caller. */ #define VERR_GMM_NOT_PAGE_OWNER (-3810) /** The specified chunk was not found. */ #define VERR_GMM_CHUNK_NOT_FOUND (-3811) /** The chunk has already been mapped into the process. */ #define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812) /** The chunk to be unmapped isn't actually mapped into the process. */ #define VERR_GMM_CHUNK_NOT_MAPPED (-3813) /** The reservation or reservation update was declined - too many VMs, too * little memory, and/or too low GMM configuration. */ #define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3814) /** @} */ /** @name VBox GVM Status Codes * @{ */ /** The GVM is out of VM handle space. */ #define VERR_GVM_TOO_MANY_VMS (-3900) /** The EMT was not blocked at the time of the call. */ #define VINF_GVM_NOT_BLOCKED 3901 /** The EMT was not busy running guest code at the time of the call. */ #define VINF_GVM_NOT_BUSY_IN_GC 3902 /** RTThreadYield was called during a GVMMR0SchedPoll call. */ #define VINF_GVM_YIELDED 3903 /** @} */ /** @name VBox VMX Status Codes * @{ */ /** Invalid VMCS index or write to read-only element. */ #define VERR_VMX_INVALID_VMCS_FIELD (-4000) /** Invalid VMCS pointer. */ #define VERR_VMX_INVALID_VMCS_PTR (-4001) /** Invalid VMXON pointer. */ #define VERR_VMX_INVALID_VMXON_PTR (-4002) /** Generic VMX failure. */ #define VERR_VMX_GENERIC (-4003) /** Invalid CPU mode for VMX execution. */ #define VERR_VMX_UNSUPPORTED_MODE (-4004) /** Unable to start VM execution. */ #define VERR_VMX_UNABLE_TO_START_VM (-4005) /** Unable to resume VM execution. */ #define VERR_VMX_UNABLE_TO_RESUME_VM (-4006) /** Unable to switch due to invalid host state. */ #define VERR_VMX_INVALID_HOST_STATE (-4007) /** IA32_FEATURE_CONTROL MSR not setup correcty (turn on VMX in the host system BIOS) */ #define VERR_VMX_ILLEGAL_FEATURE_CONTROL_MSR (-4008) /** VMX CPU extension not available */ #define VERR_VMX_NO_VMX (-4009) /** VMXON failed; possibly because it was already run before */ #define VERR_VMX_VMXON_FAILED (-4010) /** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */ #define VERR_VMX_IN_VMX_ROOT_MODE (-4011) /** Somebody cleared X86_CR4_VMXE in the CR4 register. */ #define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012) /** VT-x features locked or unavailable in MSR. */ #define VERR_VMX_MSR_LOCKED_OR_DISABLED (-4013) /** Unable to switch due to invalid guest state. */ #define VERR_VMX_INVALID_GUEST_STATE (-4014) /** Unexpected VM exit code. */ #define VERR_VMX_UNEXPECTED_EXIT_CODE (-4015) /** Unexpected VM exception code. */ #define VERR_VMX_UNEXPECTED_EXCEPTION (-4016) /** Unexpected interruption exit code. */ #define VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_CODE (-4017) /** @} */ /** @name VBox SVM Status Codes * @{ */ /** Unable to start VM execution. */ #define VERR_SVM_UNABLE_TO_START_VM (-4050) /** AMD-V bit not set in K6_EFER MSR */ #define VERR_SVM_ILLEGAL_EFER_MSR (-4051) /** AMD-V CPU extension not available. */ #define VERR_SVM_NO_SVM (-4052) /** AMD-V CPU extension disabled (by BIOS). */ #define VERR_SVM_DISABLED (-4053) /** AMD-V CPU extension in-use. */ #define VERR_SVM_IN_USE (-4054) /** @} */ /** @name VBox HWACCM Status Codes * @{ */ /** Unable to start VM execution. */ #define VERR_HWACCM_UNKNOWN_CPU (-4100) /** No CPUID support. */ #define VERR_HWACCM_NO_CPUID (-4101) /** Host is about to go into suspend mode. */ #define VERR_HWACCM_SUSPEND_PENDING (-4102) /** Conflicting CFGM values. */ #define VERR_HWACCM_CONFIG_MISMATCH (-4103) /** @} */ /** @name VBox Disassembler Status Codes * @{ */ /** Invalid opcode byte(s) */ #define VERR_DIS_INVALID_OPCODE (-4200) /** Generic failure during disassembly. */ #define VERR_DIS_GEN_FAILURE (-4201) /** @} */ /** @name VBox Webservice Status Codes * @{ */ /** Authentication failed (ISessionManager::logon()) */ #define VERR_WEB_NOT_AUTHENTICATED (-4300) /** Invalid format of managed object reference */ #define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301) /** Invalid session ID in managed object reference */ #define VERR_WEB_INVALID_SESSION_ID (-4302) /** Invalid object ID in managed object reference */ #define VERR_WEB_INVALID_OBJECT_ID (-4303) /** Unsupported interface for managed object reference */ #define VERR_WEB_UNSUPPORTED_INTERFACE (-4304) /** @} */ /** @name VBox PARAV Status Codes * @{ */ /** Switch back to host */ #define VINF_PARAV_SWITCH_TO_HOST 4400 /** @} */ /** @name VBox Video HW Acceleration command status * @{ */ /** command processing is pending, a completion handler will be called */ #define VINF_VHWA_CMD_PENDING 4500 /** @} */ /** @name VBox Webservice Status Codes * @{ */ /** Object not found. */ #define VERR_COM_OBJECT_NOT_FOUND (-4601) /** Invalid machine state. */ #define VERR_COM_INVALID_VM_STATE (-4602) /** VM error. */ #define VERR_COM_VM_ERROR (-4603) /** File error. */ #define VERR_COM_FILE_ERROR (-4604) /** IPRT error. */ #define VERR_COM_IPRT_ERROR (-4605) /** PDM error. */ #define VERR_COM_PDM_ERROR (-4606) /** Invalid object state. */ #define VERR_COM_INVALID_OBJECT_STATE (-4607) /** Host error. */ #define VERR_COM_HOST_ERROR (-4608) /** Not supported. */ #define VERR_COM_NOT_SUPPORTED (-4609) /** XML error. */ #define VERR_COM_XML_ERROR (-4610) /** Invalid session state. */ #define VERR_COM_INVALID_SESSION_STATE (-4611) /** Invalid session state. */ #define VERR_COM_OBJECT_IN_USE (-4612) /** @} */ /** @name VBox CPU hotplug Status codes * @{ */ /** CPU hotplug events from VMMDev are not monitored by the guest */ #define VERR_CPU_HOTPLUG_NOT_MONITORED_BY_GUEST (-4700) /** @} */ /** @name VBox async I/O manager Status Codes * @{ */ /** Async I/O task is pending, a completion handler will be called. */ #define VINF_AIO_TASK_PENDING 4800 /** @} */ /* SED-END */ /** @} */ #endif