/** @file * PCI - The PCI Controller And Devices. */ /* * Copyright (C) 2006-2007 innotek GmbH * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License as published by the Free Software Foundation, * in version 2 as it comes in the "COPYING" file of the VirtualBox OSE * distribution. VirtualBox OSE is distributed in the hope that it will * be useful, but WITHOUT ANY WARRANTY of any kind. */ #ifndef ___VBox_pci_h #define ___VBox_pci_h #include #include /** @defgroup grp_pci PCI - The PCI Controller. * @{ */ /** Pointer to a PCI device. */ typedef struct PCIDevice *PPCIDEVICE; /** * PCI configuration word 4 (command) and word 6 (status). */ typedef enum PCICONFIGCOMMAND { /** Supports/uses memory accesses. */ PCI_COMMAND_IOACCESS = 0x0001, PCI_COMMAND_MEMACCESS = 0x0002, PCI_COMMAND_BUSMASTER = 0x0004 } PCICONFIGCOMMAND; /** * PCI Address space specification. * This is used when registering a I/O region. */ typedef enum PCIADDRESSSPACE { /** Memory. */ PCI_ADDRESS_SPACE_MEM = 0x00, /** I/O space. */ PCI_ADDRESS_SPACE_IO = 0x01, /** Prefetch memory. */ PCI_ADDRESS_SPACE_MEM_PREFETCH = 0x08 } PCIADDRESSSPACE; /** * Callback function for mapping an PCI I/O region. * * @return VBox status code. * @param pPciDev Pointer to PCI device. Use pPciDev->pDevIns to get the device instance. * @param iRegion The region number. * @param GCPhysAddress Physical address of the region. If iType is PCI_ADDRESS_SPACE_IO, this is an * I/O port, else it's a physical address. * This address is *NOT* relative to pci_mem_base like earlier! * @param enmType One of the PCI_ADDRESS_SPACE_* values. */ typedef DECLCALLBACK(int) FNPCIIOREGIONMAP(PPCIDEVICE pPciDev, /*unsigned*/ int iRegion, RTGCPHYS GCPhysAddress, uint32_t cb, PCIADDRESSSPACE enmType); /** Pointer to a FNPCIIOREGIONMAP() function. */ typedef FNPCIIOREGIONMAP *PFNPCIIOREGIONMAP; /** @name PCI Configuration Space Registers * @{ */ #define VBOX_PCI_VENDOR_ID 0x00 /**< 16-bit RO */ #define VBOX_PCI_DEVICE_ID 0x02 /**< 16-bit RO */ #define VBOX_PCI_COMMAND 0x04 /**< 16-bit RW */ #define VBOX_PCI_STATUS 0x06 /**< 16-bit RW */ #define VBOX_PCI_REVISION_ID 0x08 /**< 8-bit RO */ #define VBOX_PCI_CLASS_PROG 0x09 /**< 8-bit RO */ #define VBOX_PCI_CLASS_DEVICE 0x0a /**< 8-bit ?? */ #define VBOX_PCI_CACHE_LINE_SIZE 0x0c /**< 8-bit ?? */ #define VBOX_PCI_LATENCY_TIMER 0x0d /**< 8-bit ?? */ #define VBOX_PCI_HEADER_TYPE 0x0e /**< 8-bit ?? */ #define VBOX_PCI_BIST 0x0f /**< 8-bit ?? */ #define VBOX_PCI_BASE_ADDRESS_0 0x10 /**< 32-bit RW */ #define VBOX_PCI_BASE_ADDRESS_1 0x14 /**< 32-bit RW */ #define VBOX_PCI_BASE_ADDRESS_2 0x18 /**< 32-bit RW */ #define VBOX_PCI_PRIMARY_BUS 0x18 /**< 8-bit ?? - bridge - primary bus number. */ #define VBOX_PCI_SECONDARY_BUS 0x19 /**< 8-bit ?? - bridge - secondary bus number. */ #define VBOX_PCI_SUBORDINATE_BUS 0x1a /**< 8-bit ?? - bridge - highest subordinate bus number. (behind the bridge) */ #define VBOX_PCI_SEC_LATENCY_TIMER 0x1b /**< 8-bit ?? - bridge - secondary latency timer. */ #define VBOX_PCI_BASE_ADDRESS_3 0x1c /**< 32-bit RW */ #define VBOX_PCI_IO_BASE 0x1c /**< 8-bit ?? - bridge - I/O range base. */ #define VBOX_PCI_IO_LIMIT 0x1d /**< 8-bit ?? - bridge - I/O range limit. */ #define VBOX_PCI_SEC_STATUS 0x1e /**< 16-bit ?? - bridge - secondary status register. */ #define VBOX_PCI_BASE_ADDRESS_4 0x20 /**< 32-bit RW */ #define VBOX_PCI_MEMORY_BASE 0x20 /**< 16-bit ?? - bridge - memory range base. */ #define VBOX_PCI_MEMORY_LIMIT 0x22 /**< 16-bit ?? - bridge - memory range limit. */ #define VBOX_PCI_BASE_ADDRESS_5 0x24 /**< 32-bit RW */ #define VBOX_PCI_PREF_MEMORY_BASE 0x24 /**< 16-bit ?? - bridge - Prefetchable memory range base. */ #define VBOX_PCI_PREF_MEMORY_LIMIT 0x26 /**< 16-bit ?? - bridge - Prefetchable memory range limit. */ #define VBOX_PCI_CARDBUS_CIS 0x28 /**< 32-bit ?? */ #define VBOX_PCI_PREF_BASE_UPPER32 0x28 /**< 32-bit ?? - bridge - Prefetchable memory range high base.*/ #define VBOX_PCI_PREF_LIMIT_UPPER32 0x2c /**< 32-bit ?? - bridge - Prefetchable memory range high limit. */ #define VBOX_PCI_SUBSYSTEM_VENDOR_ID 0x2c /**< 16-bit ?? */ #define VBOX_PCI_SUBSYSTEM_ID 0x2e /**< 16-bit ?? */ #define VBOX_PCI_ROM_ADDRESS 0x30 /**< 32-bit ?? */ #define VBOX_PCI_IO_BASE_UPPER16 0x30 /**< 16-bit ?? - bridge - memory range high base. */ #define VBOX_PCI_IO_LIMIT_UPPER16 0x32 /**< 16-bit ?? - bridge - memory range high limit. */ #define VBOX_PCI_CAPABILITY_LIST 0x34 /**< 8-bit? ?? */ #define VBOX_PCI_ROM_ADDRESS_BR 0x38 /**< 32-bit ?? - bridge */ #define VBOX_PCI_INTERRUPT_LINE 0x3c /**< 8-bit RW - Interrupt line. */ #define VBOX_PCI_INTERRUPT_PIN 0x3d /**< 8-bit RO - Interrupt pin. */ #define VBOX_PCI_MIN_GNT 0x3e /**< 8-bit ?? */ #define VBOX_PCI_BRIDGE_CONTROL 0x3e /**< 8-bit? ?? - bridge */ #define VBOX_PCI_MAX_LAT 0x3f /**< 8-bit ?? */ /** @} */ /** * Callback function for reading from the PCI configuration space. * * @returns The register value. * @param pPciDev Pointer to PCI device. Use pPciDev->pDevIns to get the device instance. * @param Address The configuration space register address. [0..255] * @param cb The register size. [1,2,4] */ typedef DECLCALLBACK(uint32_t) FNPCICONFIGREAD(PPCIDEVICE pPciDev, uint32_t Address, unsigned cb); /** Pointer to a FNPCICONFIGREAD() function. */ typedef FNPCICONFIGREAD *PFNPCICONFIGREAD; /** Pointer to a PFNPCICONFIGREAD. */ typedef PFNPCICONFIGREAD *PPFNPCICONFIGREAD; /** * Callback function for writing to the PCI configuration space. * * @param pPciDev Pointer to PCI device. Use pPciDev->pDevIns to get the device instance. * @param Address The configuration space register address. [0..255] * @param u32Value The value that's being written. The number of bits actually used from * this value is determined by the cb parameter. * @param cb The register size. [1,2,4] */ typedef DECLCALLBACK(void) FNPCICONFIGWRITE(PPCIDEVICE pPciDev, uint32_t Address, uint32_t u32Value, unsigned cb); /** Pointer to a FNPCICONFIGWRITE() function. */ typedef FNPCICONFIGWRITE *PFNPCICONFIGWRITE; /** Pointer to a PFNPCICONFIGWRITE. */ typedef PFNPCICONFIGWRITE *PPFNPCICONFIGWRITE; /** Fixed I/O region number for ROM. */ #define PCI_ROM_SLOT 6 /** Max number of I/O regions. */ #define PCI_NUM_REGIONS 7 /* * Hack to include the PCIDEVICEINT structure at the right place * to avoid duplications of FNPCIIOREGIONMAP and PCI_NUM_REGIONS. */ #ifdef PCI_INCLUDE_PRIVATE # include "PCIInternal.h" #endif /** * PCI Device structure. */ typedef struct PCIDevice { /** PCI config space. */ uint8_t config[256]; /** Internal data. */ union { #ifdef __PCIDEVICEINT_DECLARED__ PCIDEVICEINT s; #endif char padding[224]; } Int; /** Read only data. * @{ */ /** PCI device number on the pci bus. */ int32_t devfn; uint32_t Alignment0; /**< Alignment. */ /** Device name. */ R3PTRTYPE(const char *) name; /** Pointer to the device instance which registered the device. */ PPDMDEVINSR3 pDevIns; /** @} */ } PCIDEVICE; /** * Sets the vendor id config register. * @param pPciDev The PCI device. * @param u16VendorId The vendor id. */ DECLINLINE(void) PCIDevSetVendorId(PPCIDEVICE pPciDev, uint16_t u16VendorId) { u16VendorId = RT_H2LE_U16(u16VendorId); pPciDev->config[VBOX_PCI_VENDOR_ID] = u16VendorId & 0xff; pPciDev->config[VBOX_PCI_VENDOR_ID + 1] = u16VendorId >> 8; } /** * Gets the vendor id config register. * @returns the vendor id. * @param pPciDev The PCI device. */ DECLINLINE(uint16_t) PCIDevGetVendorId(PPCIDEVICE pPciDev) { return RT_LE2H_U16(RT_MAKE_U16(pPciDev->config[VBOX_PCI_VENDOR_ID], pPciDev->config[VBOX_PCI_VENDOR_ID + 1])); } /** * Sets the device id config register. * @param pPciDev The PCI device. * @param u16DeviceId The device id. */ DECLINLINE(void) PCIDevSetDeviceId(PPCIDEVICE pPciDev, uint16_t u16DeviceId) { u16DeviceId = RT_H2LE_U16(u16DeviceId); pPciDev->config[VBOX_PCI_DEVICE_ID] = u16DeviceId & 0xff; pPciDev->config[VBOX_PCI_DEVICE_ID + 1] = u16DeviceId >> 8; } /** * Gets the device id config register. * @returns the device id. * @param pPciDev The PCI device. */ DECLINLINE(uint16_t) PCIDevGetDeviceId(PPCIDEVICE pPciDev) { return RT_LE2H_U16(RT_MAKE_U16(pPciDev->config[VBOX_PCI_DEVICE_ID], pPciDev->config[VBOX_PCI_DEVICE_ID + 1])); } /** * Gets the sub-system vendor id config register. * @returns the sub-system vendor id. * @param pPciDev The PCI device. */ DECLINLINE(uint16_t) PCIDevGetSubSystemVendorId(PPCIDEVICE pPciDev) { return RT_LE2H_U16(RT_MAKE_U16(pPciDev->config[VBOX_PCI_SUBSYSTEM_VENDOR_ID], pPciDev->config[VBOX_PCI_SUBSYSTEM_VENDOR_ID + 1])); } /** * Gets the sub-system id config register. * @returns the sub-system id. * @param pPciDev The PCI device. */ DECLINLINE(uint16_t) PCIDevGetSubSystemId(PPCIDEVICE pPciDev) { return RT_LE2H_U16(RT_MAKE_U16(pPciDev->config[VBOX_PCI_SUBSYSTEM_ID], pPciDev->config[VBOX_PCI_SUBSYSTEM_ID + 1])); } /** @} */ #endif