/** @file * PDM - Pluggable Device Manager, Interfaces. */ /* * Copyright (C) 2006-2015 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___VBox_vmm_pdmifs_h #define ___VBox_vmm_pdmifs_h #include #include #include RT_C_DECLS_BEGIN /** @defgroup grp_pdm_interfaces The PDM Interface Definitions * @ingroup grp_pdm * * For historical reasons (the PDMINTERFACE enum) a lot of interface was stuffed * together in this group instead, dragging stuff into global space that didn't * need to be there and making this file huge (>2500 lines). Since we're using * UUIDs as interface identifiers (IIDs) now, no only generic PDM interface will * be added to this file. Component specific interface should be defined in the * header file of that component. * * Interfaces consists of a method table (typedef'ed struct) and an interface * ID. The typename of the method table should have an 'I' in it, be all * capitals and according to the rules, no underscores. The interface ID is a * \#define constructed by appending '_IID' to the typename. The IID value is a * UUID string on the form "a2299c0d-b709-4551-aa5a-73f59ffbed74". If you stick * to these rules, you can make use of the PDMIBASE_QUERY_INTERFACE and * PDMIBASE_RETURN_INTERFACE when querying interface and implementing * PDMIBASE::pfnQueryInterface respectively. * * In most interface descriptions the orientation of the interface is given as * 'down' or 'up'. This refers to a model with the device on the top and the * drivers stacked below it. Sometimes there is mention of 'main' or 'external' * which normally means the same, i.e. the Main or VBoxBFE API. Picture the * orientation of 'main' as horizontal. * * @{ */ /** @name PDMIBASE * @{ */ /** * PDM Base Interface. * * Everyone implements this. */ typedef struct PDMIBASE { /** * Queries an interface to the driver. * * @returns Pointer to interface. * @returns NULL if the interface was not supported by the driver. * @param pInterface Pointer to this interface structure. * @param pszIID The interface ID, a UUID string. * @thread Any thread. */ DECLR3CALLBACKMEMBER(void *, pfnQueryInterface,(struct PDMIBASE *pInterface, const char *pszIID)); } PDMIBASE; /** PDMIBASE interface ID. */ #define PDMIBASE_IID "a2299c0d-b709-4551-aa5a-73f59ffbed74" /** * Helper macro for querying an interface from PDMIBASE. * * @returns Correctly typed PDMIBASE::pfnQueryInterface return value. * * @param pIBase Pointer to the base interface. * @param InterfaceType The interface type name. The interface ID is * derived from this by appending _IID. */ #define PDMIBASE_QUERY_INTERFACE(pIBase, InterfaceType) \ ( (InterfaceType *)(pIBase)->pfnQueryInterface(pIBase, InterfaceType##_IID ) ) /** * Helper macro for implementing PDMIBASE::pfnQueryInterface. * * Return @a pInterface if @a pszIID matches the @a InterfaceType. This will * perform basic type checking. * * @param pszIID The ID of the interface that is being queried. * @param InterfaceType The interface type name. The interface ID is * derived from this by appending _IID. * @param pInterface The interface address expression. */ #define PDMIBASE_RETURN_INTERFACE(pszIID, InterfaceType, pInterface) \ do { \ if (RTUuidCompare2Strs((pszIID), InterfaceType##_IID) == 0) \ { \ P##InterfaceType pReturnInterfaceTypeCheck = (pInterface); \ return pReturnInterfaceTypeCheck; \ } \ } while (0) /** @} */ /** @name PDMIBASERC * @{ */ /** * PDM Base Interface for querying ring-mode context interfaces in * ring-3. * * This is mandatory for drivers present in raw-mode context. */ typedef struct PDMIBASERC { /** * Queries an ring-mode context interface to the driver. * * @returns Pointer to interface. * @returns NULL if the interface was not supported by the driver. * @param pInterface Pointer to this interface structure. * @param pszIID The interface ID, a UUID string. * @thread Any thread. */ DECLR3CALLBACKMEMBER(RTRCPTR, pfnQueryInterface,(struct PDMIBASERC *pInterface, const char *pszIID)); } PDMIBASERC; /** Pointer to a PDM Base Interface for query ring-mode context interfaces. */ typedef PDMIBASERC *PPDMIBASERC; /** PDMIBASERC interface ID. */ #define PDMIBASERC_IID "f6a6c649-6cb3-493f-9737-4653f221aeca" /** * Helper macro for querying an interface from PDMIBASERC. * * @returns PDMIBASERC::pfnQueryInterface return value. * * @param pIBaseRC Pointer to the base raw-mode context interface. Can * be NULL. * @param InterfaceType The interface type base name, no trailing RC. The * interface ID is derived from this by appending _IID. * * @remarks Unlike PDMIBASE_QUERY_INTERFACE, this macro is not able to do any * implicit type checking for you. */ #define PDMIBASERC_QUERY_INTERFACE(pIBaseRC, InterfaceType) \ ( (P##InterfaceType##RC)((pIBaseRC) ? (pIBaseRC)->pfnQueryInterface(pIBaseRC, InterfaceType##_IID) : NIL_RTRCPTR) ) /** * Helper macro for implementing PDMIBASERC::pfnQueryInterface. * * Return @a pInterface if @a pszIID matches the @a InterfaceType. This will * perform basic type checking. * * @param pIns Pointer to the instance data. * @param pszIID The ID of the interface that is being queried. * @param InterfaceType The interface type base name, no trailing RC. The * interface ID is derived from this by appending _IID. * @param pInterface The interface address expression. This must resolve * to some address within the instance data. * @remarks Don't use with PDMIBASE. */ #define PDMIBASERC_RETURN_INTERFACE(pIns, pszIID, InterfaceType, pInterface) \ do { \ Assert((uintptr_t)pInterface - PDMINS_2_DATA(pIns, uintptr_t) < _4M); \ if (RTUuidCompare2Strs((pszIID), InterfaceType##_IID) == 0) \ { \ InterfaceType##RC *pReturnInterfaceTypeCheck = (pInterface); \ return (uintptr_t)pReturnInterfaceTypeCheck \ - PDMINS_2_DATA(pIns, uintptr_t) \ + PDMINS_2_DATA_RCPTR(pIns); \ } \ } while (0) /** @} */ /** @name PDMIBASER0 * @{ */ /** * PDM Base Interface for querying ring-0 interfaces in ring-3. * * This is mandatory for drivers present in ring-0 context. */ typedef struct PDMIBASER0 { /** * Queries an ring-0 interface to the driver. * * @returns Pointer to interface. * @returns NULL if the interface was not supported by the driver. * @param pInterface Pointer to this interface structure. * @param pszIID The interface ID, a UUID string. * @thread Any thread. */ DECLR3CALLBACKMEMBER(RTR0PTR, pfnQueryInterface,(struct PDMIBASER0 *pInterface, const char *pszIID)); } PDMIBASER0; /** Pointer to a PDM Base Interface for query ring-0 context interfaces. */ typedef PDMIBASER0 *PPDMIBASER0; /** PDMIBASER0 interface ID. */ #define PDMIBASER0_IID "9c9b99b8-7f53-4f59-a3c2-5bc9659c7944" /** * Helper macro for querying an interface from PDMIBASER0. * * @returns PDMIBASER0::pfnQueryInterface return value. * * @param pIBaseR0 Pointer to the base ring-0 interface. Can be NULL. * @param InterfaceType The interface type base name, no trailing R0. The * interface ID is derived from this by appending _IID. * * @remarks Unlike PDMIBASE_QUERY_INTERFACE, this macro is not able to do any * implicit type checking for you. */ #define PDMIBASER0_QUERY_INTERFACE(pIBaseR0, InterfaceType) \ ( (P##InterfaceType##R0)((pIBaseR0) ? (pIBaseR0)->pfnQueryInterface(pIBaseR0, InterfaceType##_IID) : NIL_RTR0PTR) ) /** * Helper macro for implementing PDMIBASER0::pfnQueryInterface. * * Return @a pInterface if @a pszIID matches the @a InterfaceType. This will * perform basic type checking. * * @param pIns Pointer to the instance data. * @param pszIID The ID of the interface that is being queried. * @param InterfaceType The interface type base name, no trailing R0. The * interface ID is derived from this by appending _IID. * @param pInterface The interface address expression. This must resolve * to some address within the instance data. * @remarks Don't use with PDMIBASE. */ #define PDMIBASER0_RETURN_INTERFACE(pIns, pszIID, InterfaceType, pInterface) \ do { \ Assert((uintptr_t)pInterface - PDMINS_2_DATA(pIns, uintptr_t) < _4M); \ if (RTUuidCompare2Strs((pszIID), InterfaceType##_IID) == 0) \ { \ InterfaceType##R0 *pReturnInterfaceTypeCheck = (pInterface); \ return (uintptr_t)pReturnInterfaceTypeCheck \ - PDMINS_2_DATA(pIns, uintptr_t) \ + PDMINS_2_DATA_R0PTR(pIns); \ } \ } while (0) /** @} */ /** * Dummy interface. * * This is used to typedef other dummy interfaces. The purpose of a dummy * interface is to validate the logical function of a driver/device and * full a natural interface pair. */ typedef struct PDMIDUMMY { RTHCPTR pvDummy; } PDMIDUMMY; /** Pointer to a mouse port interface. */ typedef struct PDMIMOUSEPORT *PPDMIMOUSEPORT; /** * Mouse port interface (down). * Pair with PDMIMOUSECONNECTOR. */ typedef struct PDMIMOUSEPORT { /** * Puts a mouse event. * * This is called by the source of mouse events. The event will be passed up * until the topmost driver, which then calls the registered event handler. * * @returns VBox status code. Return VERR_TRY_AGAIN if you cannot process the * event now and want it to be repeated at a later point. * * @param pInterface Pointer to this interface structure. * @param dx The X delta. * @param dy The Y delta. * @param dz The Z delta. * @param dw The W (horizontal scroll button) delta. * @param fButtons The button states, see the PDMIMOUSEPORT_BUTTON_* \#defines. */ DECLR3CALLBACKMEMBER(int, pfnPutEvent,(PPDMIMOUSEPORT pInterface, int32_t dx, int32_t dy, int32_t dz, int32_t dw, uint32_t fButtons)); /** * Puts an absolute mouse event. * * This is called by the source of mouse events. The event will be passed up * until the topmost driver, which then calls the registered event handler. * * @returns VBox status code. Return VERR_TRY_AGAIN if you cannot process the * event now and want it to be repeated at a later point. * * @param pInterface Pointer to this interface structure. * @param x The X value, in the range 0 to 0xffff. * @param z The Y value, in the range 0 to 0xffff. * @param dz The Z delta. * @param dw The W (horizontal scroll button) delta. * @param fButtons The button states, see the PDMIMOUSEPORT_BUTTON_* \#defines. */ DECLR3CALLBACKMEMBER(int, pfnPutEventAbs,(PPDMIMOUSEPORT pInterface, uint32_t x, uint32_t z, int32_t dz, int32_t dw, uint32_t fButtons)); /** * Puts a multi-touch event. * * @returns VBox status code. Return VERR_TRY_AGAIN if you cannot process the * event now and want it to be repeated at a later point. * * @param pInterface Pointer to this interface structure. * @param cContacts How many touch contacts in this event. * @param pau64Contacts Pointer to array of packed contact information. * Each 64bit element contains: * Bits 0..15: X coordinate in pixels (signed). * Bits 16..31: Y coordinate in pixels (signed). * Bits 32..39: contact identifier. * Bit 40: "in contact" flag, which indicates that * there is a contact with the touch surface. * Bit 41: "in range" flag, the contact is close enough * to the touch surface. * All other bits are reserved for future use and must be set to 0. * @param u32ScanTime Timestamp of this event in milliseconds. Only relative * time between event is important. */ DECLR3CALLBACKMEMBER(int, pfnPutEventMultiTouch,(PPDMIMOUSEPORT pInterface, uint8_t cContacts, const uint64_t *pau64Contacts, uint32_t u32ScanTime)); } PDMIMOUSEPORT; /** PDMIMOUSEPORT interface ID. */ #define PDMIMOUSEPORT_IID "359364f0-9fa3-4490-a6b4-7ed771901c93" /** Mouse button defines for PDMIMOUSEPORT::pfnPutEvent. * @{ */ #define PDMIMOUSEPORT_BUTTON_LEFT RT_BIT(0) #define PDMIMOUSEPORT_BUTTON_RIGHT RT_BIT(1) #define PDMIMOUSEPORT_BUTTON_MIDDLE RT_BIT(2) #define PDMIMOUSEPORT_BUTTON_X1 RT_BIT(3) #define PDMIMOUSEPORT_BUTTON_X2 RT_BIT(4) /** @} */ /** Pointer to a mouse connector interface. */ typedef struct PDMIMOUSECONNECTOR *PPDMIMOUSECONNECTOR; /** * Mouse connector interface (up). * Pair with PDMIMOUSEPORT. */ typedef struct PDMIMOUSECONNECTOR { /** * Notifies the the downstream driver of changes to the reporting modes * supported by the driver * * @param pInterface Pointer to this interface structure. * @param fRelative Whether relative mode is currently supported. * @param fAbsolute Whether absolute mode is currently supported. * @param fAbsolute Whether multi-touch mode is currently supported. */ DECLR3CALLBACKMEMBER(void, pfnReportModes,(PPDMIMOUSECONNECTOR pInterface, bool fRelative, bool fAbsolute, bool fMultiTouch)); /** * Flushes the mouse queue if it contains pending events. * * @param pInterface Pointer to this interface structure. */ DECLR3CALLBACKMEMBER(void, pfnFlushQueue,(PPDMIMOUSECONNECTOR pInterface)); } PDMIMOUSECONNECTOR; /** PDMIMOUSECONNECTOR interface ID. */ #define PDMIMOUSECONNECTOR_IID "ce64d7bd-fa8f-41d1-a6fb-d102a2d6bffe" /** Pointer to a keyboard port interface. */ typedef struct PDMIKEYBOARDPORT *PPDMIKEYBOARDPORT; /** * Keyboard port interface (down). * Pair with PDMIKEYBOARDCONNECTOR. */ typedef struct PDMIKEYBOARDPORT { /** * Puts a scan code based keyboard event. * * This is called by the source of keyboard events. The event will be passed up * until the topmost driver, which then calls the registered event handler. * * @returns VBox status code. Return VERR_TRY_AGAIN if you cannot process the * event now and want it to be repeated at a later point. * * @param pInterface Pointer to this interface structure. * @param u8ScanCode The scan code to queue. */ DECLR3CALLBACKMEMBER(int, pfnPutEventScan,(PPDMIKEYBOARDPORT pInterface, uint8_t u8KeyCode)); /** * Puts a USB HID usage ID based keyboard event. * * This is called by the source of keyboard events. The event will be passed up * until the topmost driver, which then calls the registered event handler. * * @returns VBox status code. Return VERR_TRY_AGAIN if you cannot process the * event now and want it to be repeated at a later point. * * @param pInterface Pointer to this interface structure. * @param u32UsageID The HID usage code event to queue. */ DECLR3CALLBACKMEMBER(int, pfnPutEventHid,(PPDMIKEYBOARDPORT pInterface, uint32_t u32UsageID)); } PDMIKEYBOARDPORT; /** PDMIKEYBOARDPORT interface ID. */ #define PDMIKEYBOARDPORT_IID "2a0844f0-410b-40ab-a6ed-6575f3aa3e29" /** * Keyboard LEDs. */ typedef enum PDMKEYBLEDS { /** No leds. */ PDMKEYBLEDS_NONE = 0x0000, /** Num Lock */ PDMKEYBLEDS_NUMLOCK = 0x0001, /** Caps Lock */ PDMKEYBLEDS_CAPSLOCK = 0x0002, /** Scroll Lock */ PDMKEYBLEDS_SCROLLLOCK = 0x0004 } PDMKEYBLEDS; /** Pointer to keyboard connector interface. */ typedef struct PDMIKEYBOARDCONNECTOR *PPDMIKEYBOARDCONNECTOR; /** * Keyboard connector interface (up). * Pair with PDMIKEYBOARDPORT */ typedef struct PDMIKEYBOARDCONNECTOR { /** * Notifies the the downstream driver about an LED change initiated by the guest. * * @param pInterface Pointer to this interface structure. * @param enmLeds The new led mask. */ DECLR3CALLBACKMEMBER(void, pfnLedStatusChange,(PPDMIKEYBOARDCONNECTOR pInterface, PDMKEYBLEDS enmLeds)); /** * Notifies the the downstream driver of changes in driver state. * * @param pInterface Pointer to this interface structure. * @param fActive Whether interface wishes to get "focus". */ DECLR3CALLBACKMEMBER(void, pfnSetActive,(PPDMIKEYBOARDCONNECTOR pInterface, bool fActive)); /** * Flushes the keyboard queue if it contains pending events. * * @param pInterface Pointer to this interface structure. */ DECLR3CALLBACKMEMBER(void, pfnFlushQueue,(PPDMIKEYBOARDCONNECTOR pInterface)); } PDMIKEYBOARDCONNECTOR; /** PDMIKEYBOARDCONNECTOR interface ID. */ #define PDMIKEYBOARDCONNECTOR_IID "db3f7bd5-953e-436f-9f8e-077905a92d82" /** Pointer to a display port interface. */ typedef struct PDMIDISPLAYPORT *PPDMIDISPLAYPORT; /** * Display port interface (down). * Pair with PDMIDISPLAYCONNECTOR. */ typedef struct PDMIDISPLAYPORT { /** * Update the display with any changed regions. * * Flushes any display changes to the memory pointed to by the * PDMIDISPLAYCONNECTOR interface and calles PDMIDISPLAYCONNECTOR::pfnUpdateRect() * while doing so. * * @returns VBox status code. * @param pInterface Pointer to this interface. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnUpdateDisplay,(PPDMIDISPLAYPORT pInterface)); /** * Update the entire display. * * Flushes the entire display content to the memory pointed to by the * PDMIDISPLAYCONNECTOR interface and calles PDMIDISPLAYCONNECTOR::pfnUpdateRect(). * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param fFailOnResize Fail is a resize is pending. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnUpdateDisplayAll,(PPDMIDISPLAYPORT pInterface, bool fFailOnResize)); /** * Return the current guest resolution and color depth in bits per pixel (bpp). * * As the graphics card is able to provide display updates with the bpp * requested by the host, this method can be used to query the actual * guest color depth. * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pcBits Where to store the current guest color depth. * @param pcx Where to store the horizontal resolution. * @param pcy Where to store the vertical resolution. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnQueryVideoMode,(PPDMIDISPLAYPORT pInterface, uint32_t *pcBits, uint32_t *pcx, uint32_t *pcy)); /** * Sets the refresh rate and restart the timer. * The rate is defined as the minimum interval between the return of * one PDMIDISPLAYPORT::pfnRefresh() call to the next one. * * The interval timer will be restarted by this call. So at VM startup * this function must be called to start the refresh cycle. The refresh * rate is not saved, but have to be when resuming a loaded VM state. * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param cMilliesInterval Number of millis between two refreshes. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnSetRefreshRate,(PPDMIDISPLAYPORT pInterface, uint32_t cMilliesInterval)); /** * Create a 32-bbp screenshot of the display. * * This will allocate and return a 32-bbp bitmap. Size of the bitmap scanline in bytes is 4*width. * * The allocated bitmap buffer must be freed with pfnFreeScreenshot. * * @param pInterface Pointer to this interface. * @param ppbData Where to store the pointer to the allocated * buffer. * @param pcbData Where to store the actual size of the bitmap. * @param pcx Where to store the width of the bitmap. * @param pcy Where to store the height of the bitmap. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnTakeScreenshot,(PPDMIDISPLAYPORT pInterface, uint8_t **ppbData, size_t *pcbData, uint32_t *pcx, uint32_t *pcy)); /** * Free screenshot buffer. * * This will free the memory buffer allocated by pfnTakeScreenshot. * * @param pInterface Pointer to this interface. * @param pbData Pointer to the buffer returned by * pfnTakeScreenshot. * @thread Any. */ DECLR3CALLBACKMEMBER(void, pfnFreeScreenshot,(PPDMIDISPLAYPORT pInterface, uint8_t *pbData)); /** * Copy bitmap to the display. * * This will convert and copy a 32-bbp bitmap (with dword aligned scanline length) to * the memory pointed to by the PDMIDISPLAYCONNECTOR interface. * * @param pInterface Pointer to this interface. * @param pvData Pointer to the bitmap bits. * @param x The upper left corner x coordinate of the destination rectangle. * @param y The upper left corner y coordinate of the destination rectangle. * @param cx The width of the source and destination rectangles. * @param cy The height of the source and destination rectangles. * @thread The emulation thread. * @remark This is just a convenience for using the bitmap conversions of the * graphics device. */ DECLR3CALLBACKMEMBER(int, pfnDisplayBlt,(PPDMIDISPLAYPORT pInterface, const void *pvData, uint32_t x, uint32_t y, uint32_t cx, uint32_t cy)); /** * Render a rectangle from guest VRAM to Framebuffer. * * @param pInterface Pointer to this interface. * @param x The upper left corner x coordinate of the rectangle to be updated. * @param y The upper left corner y coordinate of the rectangle to be updated. * @param cx The width of the rectangle to be updated. * @param cy The height of the rectangle to be updated. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnUpdateDisplayRect,(PPDMIDISPLAYPORT pInterface, int32_t x, int32_t y, uint32_t cx, uint32_t cy)); /** * Inform the VGA device whether the Display is directly using the guest VRAM and there is no need * to render the VRAM to the framebuffer memory. * * @param pInterface Pointer to this interface. * @param fRender Whether the VRAM content must be rendered to the framebuffer. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnSetRenderVRAM,(PPDMIDISPLAYPORT pInterface, bool fRender)); /** * Render a bitmap rectangle from source to target buffer. * * @param pInterface Pointer to this interface. * @param cx The width of the rectangle to be copied. * @param cy The height of the rectangle to be copied. * @param pbSrc Source frame buffer 0,0. * @param xSrc The upper left corner x coordinate of the source rectangle. * @param ySrc The upper left corner y coordinate of the source rectangle. * @param cxSrc The width of the source frame buffer. * @param cySrc The height of the source frame buffer. * @param cbSrcLine The line length of the source frame buffer. * @param cSrcBitsPerPixel The pixel depth of the source. * @param pbDst Destination frame buffer 0,0. * @param xDst The upper left corner x coordinate of the destination rectangle. * @param yDst The upper left corner y coordinate of the destination rectangle. * @param cxDst The width of the destination frame buffer. * @param cyDst The height of the destination frame buffer. * @param cbDstLine The line length of the destination frame buffer. * @param cDstBitsPerPixel The pixel depth of the destination. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnCopyRect,(PPDMIDISPLAYPORT pInterface, uint32_t cx, uint32_t cy, const uint8_t *pbSrc, int32_t xSrc, int32_t ySrc, uint32_t cxSrc, uint32_t cySrc, uint32_t cbSrcLine, uint32_t cSrcBitsPerPixel, uint8_t *pbDst, int32_t xDst, int32_t yDst, uint32_t cxDst, uint32_t cyDst, uint32_t cbDstLine, uint32_t cDstBitsPerPixel)); /** * Inform the VGA device of viewport changes (as a result of e.g. scrolling). * * @param pInterface Pointer to this interface. * @param idScreen The screen updates are for. * @param x The upper left corner x coordinate of the new viewport rectangle * @param y The upper left corner y coordinate of the new viewport rectangle * @param cx The width of the new viewport rectangle * @param cy The height of the new viewport rectangle * @thread GUI thread? * * @remarks Is allowed to be NULL. */ DECLR3CALLBACKMEMBER(void, pfnSetViewport,(PPDMIDISPLAYPORT pInterface, uint32_t idScreen, uint32_t x, uint32_t y, uint32_t cx, uint32_t cy)); /** * Send a video mode hint to the VGA device. * * @param pInterface Pointer to this interface. * @param cx The X resolution. * @param cy The Y resolution. * @param cBPP The bit count. * @param iDisplay The screen number. * @param dx X offset into the virtual framebuffer or ~0. * @param dy Y offset into the virtual framebuffer or ~0. * @param fEnabled Is this screen currently enabled? * @param fNotifyGuest Should the device send the guest an IRQ? * Set for the last hint of a series. * @thread Schedules on the emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnSendModeHint, (PPDMIDISPLAYPORT pInterface, uint32_t cx, uint32_t cy, uint32_t cBPP, uint32_t iDisplay, uint32_t dx, uint32_t dy, uint32_t fEnabled, uint32_t fNotifyGuest)); /** * Send the guest a notification about host cursor capabilities changes. * * @param pInterface Pointer to this interface. * @param fCapabilitiesAdded New supported capabilities. * @param fCapabilitiesRemoved No longer supported capabilities. * @thread Any. */ DECLR3CALLBACKMEMBER(void, pfnReportHostCursorCapabilities, (PPDMIDISPLAYPORT pInterface, uint32_t fCapabilitiesAdded, uint32_t fCapabilitiesRemoved)); /** * Tell the graphics device about the host cursor position. * * @param pInterface Pointer to this interface. * @param x X offset into the cursor range. * @param y Y offset into the cursor range. * @thread Any. */ DECLR3CALLBACKMEMBER(void, pfnReportHostCursorPosition, (PPDMIDISPLAYPORT pInterface, uint32_t x, uint32_t y)); } PDMIDISPLAYPORT; /** PDMIDISPLAYPORT interface ID. */ #ifdef VBOX_WITH_VMSVGA #define PDMIDISPLAYPORT_IID "9672e2b0-1aef-4c4d-9108-864cdb28333f" #else #define PDMIDISPLAYPORT_IID "323f3412-8903-4564-b04c-cbfe0d2d1596" #endif typedef struct VBOXVHWACMD *PVBOXVHWACMD; /**< @todo r=bird: A line what it is to make doxygen happy. */ typedef struct VBVACMDHDR *PVBVACMDHDR; typedef struct VBVAINFOSCREEN *PVBVAINFOSCREEN; typedef struct VBVAINFOVIEW *PVBVAINFOVIEW; typedef struct VBVAHOSTFLAGS *PVBVAHOSTFLAGS; struct VBOXVDMACMD_CHROMIUM_CMD; /* <- chromium [hgsmi] command */ struct VBOXVDMACMD_CHROMIUM_CTL; /* <- chromium [hgsmi] command */ /** Pointer to a display connector interface. */ typedef struct PDMIDISPLAYCONNECTOR *PPDMIDISPLAYCONNECTOR; struct VBOXCRCMDCTL; typedef DECLCALLBACKPTR(void, PFNCRCTLCOMPLETION)(struct VBOXCRCMDCTL* pCmd, uint32_t cbCmd, int rc, void *pvCompletion); /** * Display connector interface (up). * Pair with PDMIDISPLAYPORT. */ typedef struct PDMIDISPLAYCONNECTOR { /** * Resize the display. * This is called when the resolution changes. This usually happens on * request from the guest os, but may also happen as the result of a reset. * If the callback returns VINF_VGA_RESIZE_IN_PROGRESS, the caller (VGA device) * must not access the connector and return. * * @returns VINF_SUCCESS if the framebuffer resize was completed, * VINF_VGA_RESIZE_IN_PROGRESS if resize takes time and not yet finished. * @param pInterface Pointer to this interface. * @param cBits Color depth (bits per pixel) of the new video mode. * @param pvVRAM Address of the guest VRAM. * @param cbLine Size in bytes of a single scan line. * @param cx New display width. * @param cy New display height. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnResize,(PPDMIDISPLAYCONNECTOR pInterface, uint32_t cBits, void *pvVRAM, uint32_t cbLine, uint32_t cx, uint32_t cy)); /** * Update a rectangle of the display. * PDMIDISPLAYPORT::pfnUpdateDisplay is the caller. * * @param pInterface Pointer to this interface. * @param x The upper left corner x coordinate of the rectangle. * @param y The upper left corner y coordinate of the rectangle. * @param cx The width of the rectangle. * @param cy The height of the rectangle. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnUpdateRect,(PPDMIDISPLAYCONNECTOR pInterface, uint32_t x, uint32_t y, uint32_t cx, uint32_t cy)); /** * Refresh the display. * * The interval between these calls is set by * PDMIDISPLAYPORT::pfnSetRefreshRate(). The driver should call * PDMIDISPLAYPORT::pfnUpdateDisplay() if it wishes to refresh the * display. PDMIDISPLAYPORT::pfnUpdateDisplay calls pfnUpdateRect with * the changed rectangles. * * @param pInterface Pointer to this interface. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnRefresh,(PPDMIDISPLAYCONNECTOR pInterface)); /** * Reset the display. * * Notification message when the graphics card has been reset. * * @param pInterface Pointer to this interface. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnReset,(PPDMIDISPLAYCONNECTOR pInterface)); /** * LFB video mode enter/exit. * * Notification message when LinearFrameBuffer video mode is enabled/disabled. * * @param pInterface Pointer to this interface. * @param fEnabled false - LFB mode was disabled, * true - an LFB mode was disabled * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnLFBModeChange,(PPDMIDISPLAYCONNECTOR pInterface, bool fEnabled)); /** * Process the guest graphics adapter information. * * Direct notification from guest to the display connector. * * @param pInterface Pointer to this interface. * @param pvVRAM Address of the guest VRAM. * @param u32VRAMSize Size of the guest VRAM. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnProcessAdapterData,(PPDMIDISPLAYCONNECTOR pInterface, void *pvVRAM, uint32_t u32VRAMSize)); /** * Process the guest display information. * * Direct notification from guest to the display connector. * * @param pInterface Pointer to this interface. * @param pvVRAM Address of the guest VRAM. * @param uScreenId The index of the guest display to be processed. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnProcessDisplayData,(PPDMIDISPLAYCONNECTOR pInterface, void *pvVRAM, unsigned uScreenId)); /** * Process the guest Video HW Acceleration command. * * @param pInterface Pointer to this interface. * @param pCmd Video HW Acceleration Command to be processed. * @returns VINF_SUCCESS - command is completed, * VINF_CALLBACK_RETURN - command will by asynchronously completed via complete callback * VERR_INVALID_STATE - the command could not be processed (most likely because the framebuffer was disconnected) - the post should be retried later * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnVHWACommandProcess,(PPDMIDISPLAYCONNECTOR pInterface, PVBOXVHWACMD pCmd)); /** * Process the guest chromium command. * * @param pInterface Pointer to this interface. * @param pCmd Video HW Acceleration Command to be processed. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnCrHgsmiCommandProcess,(PPDMIDISPLAYCONNECTOR pInterface, struct VBOXVDMACMD_CHROMIUM_CMD* pCmd, uint32_t cbCmd)); /** * Process the guest chromium control command. * * @param pInterface Pointer to this interface. * @param pCmd Video HW Acceleration Command to be processed. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnCrHgsmiControlProcess,(PPDMIDISPLAYCONNECTOR pInterface, struct VBOXVDMACMD_CHROMIUM_CTL* pCtl, uint32_t cbCtl)); /** * Process the guest chromium control command. * * @param pInterface Pointer to this interface. * @param pCmd Video HW Acceleration Command to be processed. * @param cbCmd Undocumented! * @param pfnCompletion Undocumented! * @param pvCompletion Undocumented! * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnCrHgcmCtlSubmit,(PPDMIDISPLAYCONNECTOR pInterface, struct VBOXCRCMDCTL *pCmd, uint32_t cbCmd, PFNCRCTLCOMPLETION pfnCompletion, void *pvCompletion)); /** * The specified screen enters VBVA mode. * * @param pInterface Pointer to this interface. * @param uScreenId The screen updates are for. * @param pHostFlags Undocumented! * @param fRenderThreadMode if true - the graphics device has a separate thread that does all rendering. * This means that: * 1. most pfnVBVAXxx callbacks (see the individual documentation for each one) * will be called in the context of the render thread rather than the emulation thread * 2. PDMIDISPLAYCONNECTOR implementor (i.e. DisplayImpl) must NOT notify crogl backend * about vbva-originated events (e.g. resize), because crogl is working in CrCmd mode, * in the context of the render thread as part of the Graphics device, and gets notified about those events directly * @thread if fRenderThreadMode is TRUE - the render thread, otherwise - the emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnVBVAEnable,(PPDMIDISPLAYCONNECTOR pInterface, unsigned uScreenId, PVBVAHOSTFLAGS pHostFlags, bool fRenderThreadMode)); /** * The specified screen leaves VBVA mode. * * @param pInterface Pointer to this interface. * @param uScreenId The screen updates are for. * @thread if render thread mode is on (fRenderThreadMode that was passed to pfnVBVAEnable is TRUE) - the render thread pfnVBVAEnable was called in, * otherwise - the emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnVBVADisable,(PPDMIDISPLAYCONNECTOR pInterface, unsigned uScreenId)); /** * A sequence of pfnVBVAUpdateProcess calls begins. * * @param pInterface Pointer to this interface. * @param uScreenId The screen updates are for. * @thread if render thread mode is on (fRenderThreadMode that was passed to pfnVBVAEnable is TRUE) - the render thread pfnVBVAEnable was called in, * otherwise - the emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnVBVAUpdateBegin,(PPDMIDISPLAYCONNECTOR pInterface, unsigned uScreenId)); /** * Process the guest VBVA command. * * @param pInterface Pointer to this interface. * @param uScreenId The screen updates are for. * @param pCmd Video HW Acceleration Command to be processed. * @param cbCmd Undocumented! * @thread if render thread mode is on (fRenderThreadMode that was passed to pfnVBVAEnable is TRUE) - the render thread pfnVBVAEnable was called in, * otherwise - the emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnVBVAUpdateProcess,(PPDMIDISPLAYCONNECTOR pInterface, unsigned uScreenId, const PVBVACMDHDR pCmd, size_t cbCmd)); /** * A sequence of pfnVBVAUpdateProcess calls ends. * * @param pInterface Pointer to this interface. * @param uScreenId The screen updates are for. * @param x The upper left corner x coordinate of the combined rectangle of all VBVA updates. * @param y The upper left corner y coordinate of the rectangle. * @param cx The width of the rectangle. * @param cy The height of the rectangle. * @thread if render thread mode is on (fRenderThreadMode that was passed to pfnVBVAEnable is TRUE) - the render thread pfnVBVAEnable was called in, * otherwise - the emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnVBVAUpdateEnd,(PPDMIDISPLAYCONNECTOR pInterface, unsigned uScreenId, int32_t x, int32_t y, uint32_t cx, uint32_t cy)); /** * Resize the display. * This is called when the resolution changes. This usually happens on * request from the guest os, but may also happen as the result of a reset. * If the callback returns VINF_VGA_RESIZE_IN_PROGRESS, the caller (VGA device) * must not access the connector and return. * * @todo Merge with pfnResize. * * @returns VINF_SUCCESS if the framebuffer resize was completed, * VINF_VGA_RESIZE_IN_PROGRESS if resize takes time and not yet finished. * @param pInterface Pointer to this interface. * @param pView The description of VRAM block for this screen. * @param pScreen The data of screen being resized. * @param pvVRAM Address of the guest VRAM. * @thread if render thread mode is on (fRenderThreadMode that was passed to pfnVBVAEnable is TRUE) - the render thread pfnVBVAEnable was called in, * otherwise - the emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnVBVAResize,(PPDMIDISPLAYCONNECTOR pInterface, const PVBVAINFOVIEW pView, const PVBVAINFOSCREEN pScreen, void *pvVRAM)); /** * Update the pointer shape. * This is called when the mouse pointer shape changes. The new shape * is passed as a caller allocated buffer that will be freed after returning * * @param pInterface Pointer to this interface. * @param fVisible Visibility indicator (if false, the other parameters are undefined). * @param fAlpha Flag whether alpha channel is being passed. * @param xHot Pointer hot spot x coordinate. * @param yHot Pointer hot spot y coordinate. * @param x Pointer new x coordinate on screen. * @param y Pointer new y coordinate on screen. * @param cx Pointer width in pixels. * @param cy Pointer height in pixels. * @param cbScanline Size of one scanline in bytes. * @param pvShape New shape buffer. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnVBVAMousePointerShape,(PPDMIDISPLAYCONNECTOR pInterface, bool fVisible, bool fAlpha, uint32_t xHot, uint32_t yHot, uint32_t cx, uint32_t cy, const void *pvShape)); /** * The guest capabilities were updated. * * @param pInterface Pointer to this interface. * @param fCapabilities The new capability flag state. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnVBVAGuestCapabilityUpdate,(PPDMIDISPLAYCONNECTOR pInterface, uint32_t fCapabilities)); /** Read-only attributes. * For preformance reasons some readonly attributes are kept in the interface. * We trust the interface users to respect the readonlyness of these. * @{ */ /** Pointer to the display data buffer. */ uint8_t *pbData; /** Size of a scanline in the data buffer. */ uint32_t cbScanline; /** The color depth (in bits) the graphics card is supposed to provide. */ uint32_t cBits; /** The display width. */ uint32_t cx; /** The display height. */ uint32_t cy; /** @} */ /** * The guest display input mapping rectangle was updated. * * @param pInterface Pointer to this interface. * @param xOrigin Upper left X co-ordinate relative to the first screen. * @param yOrigin Upper left Y co-ordinate relative to the first screen. * @param cx Rectangle width. * @param cy Rectangle height. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnVBVAInputMappingUpdate,(PPDMIDISPLAYCONNECTOR pInterface, int32_t xOrigin, int32_t yOrigin, uint32_t cx, uint32_t cy)); } PDMIDISPLAYCONNECTOR; /** PDMIDISPLAYCONNECTOR interface ID. */ #define PDMIDISPLAYCONNECTOR_IID "e883a720-85fb-11e4-a307-0b06689c9661" /** Pointer to a secret key interface. */ typedef struct PDMISECKEY *PPDMISECKEY; /** * Secret key interface to retrieve secret keys. */ typedef struct PDMISECKEY { /** * Retains a key identified by the ID. The caller will only hold a reference * to the key and must not modify the key buffer in any way. * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pszId The alias/id for the key to retrieve. * @param ppbKey Where to store the pointer to the key buffer on success. * @param pcbKey Where to store the size of the key in bytes on success. */ DECLR3CALLBACKMEMBER(int, pfnKeyRetain, (PPDMISECKEY pInterface, const char *pszId, const uint8_t **pbKey, size_t *pcbKey)); /** * Releases one reference of the key identified by the given identifier. * The caller must not access the key buffer after calling this operation. * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pszId The alias/id for the key to release. * * @note: It is advised to release the key whenever it is not used anymore so the entity * storing the key can do anything to make retrieving the key from memory more * difficult like scrambling the memory buffer for instance. */ DECLR3CALLBACKMEMBER(int, pfnKeyRelease, (PPDMISECKEY pInterface, const char *pszId)); /** * Retains a password identified by the ID. The caller will only hold a reference * to the password and must not modify the buffer in any way. * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pszId The alias/id for the password to retrieve. * @param ppszPassword Where to store the pointer to the password on success. */ DECLR3CALLBACKMEMBER(int, pfnPasswordRetain, (PPDMISECKEY pInterface, const char *pszId, const char **ppszPassword)); /** * Releases one reference of the password identified by the given identifier. * The caller must not access the password after calling this operation. * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pszId The alias/id for the password to release. * * @note: It is advised to release the password whenever it is not used anymore so the entity * storing the password can do anything to make retrieving the password from memory more * difficult like scrambling the memory buffer for instance. */ DECLR3CALLBACKMEMBER(int, pfnPasswordRelease, (PPDMISECKEY pInterface, const char *pszId)); } PDMISECKEY; /** PDMISECKEY interface ID. */ #define PDMISECKEY_IID "3d698355-d995-453d-960f-31566a891df2" /** Pointer to a secret key helper interface. */ typedef struct PDMISECKEYHLP *PPDMISECKEYHLP; /** * Secret key helper interface for non critical functionality. */ typedef struct PDMISECKEYHLP { /** * Notifies the interface provider that a key couldn't be retrieved from the key store. * * @returns VBox status code. * @param pInterface Pointer to this interface. */ DECLR3CALLBACKMEMBER(int, pfnKeyMissingNotify, (PPDMISECKEYHLP pInterface)); } PDMISECKEYHLP; /** PDMISECKEY interface ID. */ #define PDMISECKEYHLP_IID "7be96168-4156-40ac-86d2-3073bf8b318e" /** Pointer to a char port interface. */ typedef struct PDMICHARPORT *PPDMICHARPORT; /** * Char port interface (down). * Pair with PDMICHARCONNECTOR. */ typedef struct PDMICHARPORT { /** * Deliver data read to the device/driver. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pvBuf Where the read bits are stored. * @param pcbRead Number of bytes available for reading/having been read. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnNotifyRead,(PPDMICHARPORT pInterface, const void *pvBuf, size_t *pcbRead)); /** * Notify the device/driver when the status lines changed. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fNewStatusLine New state of the status line pins. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnNotifyStatusLinesChanged,(PPDMICHARPORT pInterface, uint32_t fNewStatusLines)); /** * Notify the device when the driver buffer is full. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fFull Buffer full. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnNotifyBufferFull,(PPDMICHARPORT pInterface, bool fFull)); /** * Notify the device/driver that a break occurred. * * @returns VBox statsus code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnNotifyBreak,(PPDMICHARPORT pInterface)); } PDMICHARPORT; /** PDMICHARPORT interface ID. */ #define PDMICHARPORT_IID "22769834-ea8b-4a6d-ade1-213dcdbd1228" /** @name Bit mask definitions for status line type. * @{ */ #define PDMICHARPORT_STATUS_LINES_DCD RT_BIT(0) #define PDMICHARPORT_STATUS_LINES_RI RT_BIT(1) #define PDMICHARPORT_STATUS_LINES_DSR RT_BIT(2) #define PDMICHARPORT_STATUS_LINES_CTS RT_BIT(3) /** @} */ /** Pointer to a char interface. */ typedef struct PDMICHARCONNECTOR *PPDMICHARCONNECTOR; /** * Char connector interface (up). * Pair with PDMICHARPORT. */ typedef struct PDMICHARCONNECTOR { /** * Write bits. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pvBuf Where to store the write bits. * @param cbWrite Number of bytes to write. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnWrite,(PPDMICHARCONNECTOR pInterface, const void *pvBuf, size_t cbWrite)); /** * Set device parameters. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param Bps Speed of the serial connection. (bits per second) * @param chParity Parity method: 'E' - even, 'O' - odd, 'N' - none. * @param cDataBits Number of data bits. * @param cStopBits Number of stop bits. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnSetParameters,(PPDMICHARCONNECTOR pInterface, unsigned Bps, char chParity, unsigned cDataBits, unsigned cStopBits)); /** * Set the state of the modem lines. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fRequestToSend Set to true to make the Request to Send line active otherwise to 0. * @param fDataTerminalReady Set to true to make the Data Terminal Ready line active otherwise 0. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnSetModemLines,(PPDMICHARCONNECTOR pInterface, bool fRequestToSend, bool fDataTerminalReady)); /** * Sets the TD line into break condition. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fBreak Set to true to let the device send a break false to put into normal operation. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnSetBreak,(PPDMICHARCONNECTOR pInterface, bool fBreak)); } PDMICHARCONNECTOR; /** PDMICHARCONNECTOR interface ID. */ #define PDMICHARCONNECTOR_IID "4ad5c190-b408-4cef-926f-fbffce0dc5cc" /** Pointer to a stream interface. */ typedef struct PDMISTREAM *PPDMISTREAM; /** * Stream interface (up). * Makes up the foundation for PDMICHARCONNECTOR. No pair interface. */ typedef struct PDMISTREAM { /** * Read bits. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pvBuf Where to store the read bits. * @param cbRead Number of bytes to read/bytes actually read. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnRead,(PPDMISTREAM pInterface, void *pvBuf, size_t *cbRead)); /** * Write bits. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pvBuf Where to store the write bits. * @param cbWrite Number of bytes to write/bytes actually written. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnWrite,(PPDMISTREAM pInterface, const void *pvBuf, size_t *cbWrite)); } PDMISTREAM; /** PDMISTREAM interface ID. */ #define PDMISTREAM_IID "d1a5bf5e-3d2c-449a-bde9-addd7920b71f" /** Mode of the parallel port */ typedef enum PDMPARALLELPORTMODE { /** First invalid mode. */ PDM_PARALLEL_PORT_MODE_INVALID = 0, /** SPP (Compatibility mode). */ PDM_PARALLEL_PORT_MODE_SPP, /** EPP Data mode. */ PDM_PARALLEL_PORT_MODE_EPP_DATA, /** EPP Address mode. */ PDM_PARALLEL_PORT_MODE_EPP_ADDR, /** ECP mode (not implemented yet). */ PDM_PARALLEL_PORT_MODE_ECP, /** 32bit hack. */ PDM_PARALLEL_PORT_MODE_32BIT_HACK = 0x7fffffff } PDMPARALLELPORTMODE; /** Pointer to a host parallel port interface. */ typedef struct PDMIHOSTPARALLELPORT *PPDMIHOSTPARALLELPORT; /** * Host parallel port interface (down). * Pair with PDMIHOSTPARALLELCONNECTOR. */ typedef struct PDMIHOSTPARALLELPORT { /** * Notify device/driver that an interrupt has occurred. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnNotifyInterrupt,(PPDMIHOSTPARALLELPORT pInterface)); } PDMIHOSTPARALLELPORT; /** PDMIHOSTPARALLELPORT interface ID. */ #define PDMIHOSTPARALLELPORT_IID "f24b8668-e7f6-4eaa-a14c-4aa2a5f7048e" /** Pointer to a Host Parallel connector interface. */ typedef struct PDMIHOSTPARALLELCONNECTOR *PPDMIHOSTPARALLELCONNECTOR; /** * Host parallel connector interface (up). * Pair with PDMIHOSTPARALLELPORT. */ typedef struct PDMIHOSTPARALLELCONNECTOR { /** * Write bits. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pvBuf Where to store the write bits. * @param cbWrite Number of bytes to write. * @param enmMode Mode to write the data. * @thread Any thread. * @todo r=klaus cbWrite only defines buffer length, method needs a way top return actually written amount of data. */ DECLR3CALLBACKMEMBER(int, pfnWrite,(PPDMIHOSTPARALLELCONNECTOR pInterface, const void *pvBuf, size_t cbWrite, PDMPARALLELPORTMODE enmMode)); /** * Read bits. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pvBuf Where to store the read bits. * @param cbRead Number of bytes to read. * @param enmMode Mode to read the data. * @thread Any thread. * @todo r=klaus cbRead only defines buffer length, method needs a way top return actually read amount of data. */ DECLR3CALLBACKMEMBER(int, pfnRead,(PPDMIHOSTPARALLELCONNECTOR pInterface, void *pvBuf, size_t cbRead, PDMPARALLELPORTMODE enmMode)); /** * Set data direction of the port (forward/reverse). * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fForward Flag whether to indicate whether the port is operated in forward or reverse mode. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnSetPortDirection,(PPDMIHOSTPARALLELCONNECTOR pInterface, bool fForward)); /** * Write control register bits. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fReg The new control register value. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnWriteControl,(PPDMIHOSTPARALLELCONNECTOR pInterface, uint8_t fReg)); /** * Read control register bits. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pfReg Where to store the control register bits. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnReadControl,(PPDMIHOSTPARALLELCONNECTOR pInterface, uint8_t *pfReg)); /** * Read status register bits. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pfReg Where to store the status register bits. * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnReadStatus,(PPDMIHOSTPARALLELCONNECTOR pInterface, uint8_t *pfReg)); } PDMIHOSTPARALLELCONNECTOR; /** PDMIHOSTPARALLELCONNECTOR interface ID. */ #define PDMIHOSTPARALLELCONNECTOR_IID "7c532602-7438-4fbc-9265-349d9f0415f9" /** ACPI power source identifier */ typedef enum PDMACPIPOWERSOURCE { PDM_ACPI_POWER_SOURCE_UNKNOWN = 0, PDM_ACPI_POWER_SOURCE_OUTLET, PDM_ACPI_POWER_SOURCE_BATTERY } PDMACPIPOWERSOURCE; /** Pointer to ACPI battery state. */ typedef PDMACPIPOWERSOURCE *PPDMACPIPOWERSOURCE; /** ACPI battey capacity */ typedef enum PDMACPIBATCAPACITY { PDM_ACPI_BAT_CAPACITY_MIN = 0, PDM_ACPI_BAT_CAPACITY_MAX = 100, PDM_ACPI_BAT_CAPACITY_UNKNOWN = 255 } PDMACPIBATCAPACITY; /** Pointer to ACPI battery capacity. */ typedef PDMACPIBATCAPACITY *PPDMACPIBATCAPACITY; /** ACPI battery state. See ACPI 3.0 spec '_BST (Battery Status)' */ typedef enum PDMACPIBATSTATE { PDM_ACPI_BAT_STATE_CHARGED = 0x00, PDM_ACPI_BAT_STATE_DISCHARGING = 0x01, PDM_ACPI_BAT_STATE_CHARGING = 0x02, PDM_ACPI_BAT_STATE_CRITICAL = 0x04 } PDMACPIBATSTATE; /** Pointer to ACPI battery state. */ typedef PDMACPIBATSTATE *PPDMACPIBATSTATE; /** Pointer to an ACPI port interface. */ typedef struct PDMIACPIPORT *PPDMIACPIPORT; /** * ACPI port interface (down). Used by both the ACPI driver and (grumble) main. * Pair with PDMIACPICONNECTOR. */ typedef struct PDMIACPIPORT { /** * Send an ACPI power off event. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. */ DECLR3CALLBACKMEMBER(int, pfnPowerButtonPress,(PPDMIACPIPORT pInterface)); /** * Send an ACPI sleep button event. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. */ DECLR3CALLBACKMEMBER(int, pfnSleepButtonPress,(PPDMIACPIPORT pInterface)); /** * Check if the last power button event was handled by the guest. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pfHandled Is set to true if the last power button event was handled, false otherwise. */ DECLR3CALLBACKMEMBER(int, pfnGetPowerButtonHandled,(PPDMIACPIPORT pInterface, bool *pfHandled)); /** * Check if the guest entered the ACPI mode. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pfEnabled Is set to true if the guest entered the ACPI mode, false otherwise. */ DECLR3CALLBACKMEMBER(int, pfnGetGuestEnteredACPIMode,(PPDMIACPIPORT pInterface, bool *pfEntered)); /** * Check if the given CPU is still locked by the guest. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param uCpu The CPU to check for. * @param pfLocked Is set to true if the CPU is still locked by the guest, false otherwise. */ DECLR3CALLBACKMEMBER(int, pfnGetCpuStatus,(PPDMIACPIPORT pInterface, unsigned uCpu, bool *pfLocked)); /** * Send an ACPI monitor hot-plug event. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing * the called function pointer. */ DECLR3CALLBACKMEMBER(int, pfnMonitorHotPlugEvent,(PPDMIACPIPORT pInterface)); } PDMIACPIPORT; /** PDMIACPIPORT interface ID. */ #define PDMIACPIPORT_IID "d64233e3-7bb0-4ef1-a313-2bcfafbe6260" /** Pointer to an ACPI connector interface. */ typedef struct PDMIACPICONNECTOR *PPDMIACPICONNECTOR; /** * ACPI connector interface (up). * Pair with PDMIACPIPORT. */ typedef struct PDMIACPICONNECTOR { /** * Get the current power source of the host system. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param penmPowerSource Pointer to the power source result variable. */ DECLR3CALLBACKMEMBER(int, pfnQueryPowerSource,(PPDMIACPICONNECTOR, PPDMACPIPOWERSOURCE penmPowerSource)); /** * Query the current battery status of the host system. * * @returns VBox status code? * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pfPresent Is set to true if battery is present, false otherwise. * @param penmRemainingCapacity Pointer to the battery remaining capacity (0 - 100 or 255 for unknown). * @param penmBatteryState Pointer to the battery status. * @param pu32PresentRate Pointer to the present rate (0..1000 of the total capacity). */ DECLR3CALLBACKMEMBER(int, pfnQueryBatteryStatus,(PPDMIACPICONNECTOR, bool *pfPresent, PPDMACPIBATCAPACITY penmRemainingCapacity, PPDMACPIBATSTATE penmBatteryState, uint32_t *pu32PresentRate)); } PDMIACPICONNECTOR; /** PDMIACPICONNECTOR interface ID. */ #define PDMIACPICONNECTOR_IID "5f14bf8d-1edf-4e3a-a1e1-cca9fd08e359" /** Pointer to a VMMDevice port interface. */ typedef struct PDMIVMMDEVPORT *PPDMIVMMDEVPORT; /** * VMMDevice port interface (down). * Pair with PDMIVMMDEVCONNECTOR. */ typedef struct PDMIVMMDEVPORT { /** * Return the current absolute mouse position in pixels * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pxAbs Pointer of result value, can be NULL * @param pyAbs Pointer of result value, can be NULL */ DECLR3CALLBACKMEMBER(int, pfnQueryAbsoluteMouse,(PPDMIVMMDEVPORT pInterface, int32_t *pxAbs, int32_t *pyAbs)); /** * Set the new absolute mouse position in pixels * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param xAbs New absolute X position * @param yAbs New absolute Y position */ DECLR3CALLBACKMEMBER(int, pfnSetAbsoluteMouse,(PPDMIVMMDEVPORT pInterface, int32_t xAbs, int32_t yAbs)); /** * Return the current mouse capability flags * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pfCapabilities Pointer of result value */ DECLR3CALLBACKMEMBER(int, pfnQueryMouseCapabilities,(PPDMIVMMDEVPORT pInterface, uint32_t *pfCapabilities)); /** * Set the current mouse capability flag (host side) * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fCapsAdded Mask of capabilities to add to the flag * @param fCapsRemoved Mask of capabilities to remove from the flag */ DECLR3CALLBACKMEMBER(int, pfnUpdateMouseCapabilities,(PPDMIVMMDEVPORT pInterface, uint32_t fCapsAdded, uint32_t fCapsRemoved)); /** * Issue a display resolution change request. * * Note that there can only one request in the queue and that in case the guest does * not process it, issuing another request will overwrite the previous. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param cx Horizontal pixel resolution (0 = do not change). * @param cy Vertical pixel resolution (0 = do not change). * @param cBits Bits per pixel (0 = do not change). * @param idxDisplay The display index. * @param xOrigin The X coordinate of the lower left * corner of the secondary display with * ID = idxDisplay * @param yOrigin The Y coordinate of the lower left * corner of the secondary display with * ID = idxDisplay * @param fEnabled Whether the display is enabled or not. (Guessing * again.) * @param fChangeOrigin Whether the display origin point changed. (Guess) */ DECLR3CALLBACKMEMBER(int, pfnRequestDisplayChange,(PPDMIVMMDEVPORT pInterface, uint32_t cx, uint32_t cy, uint32_t cBits, uint32_t idxDisplay, int32_t xOrigin, int32_t yOrigin, bool fEnabled, bool fChangeOrigin)); /** * Pass credentials to guest. * * Note that there can only be one set of credentials and the guest may or may not * query them and may do whatever it wants with them. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param pszUsername User name, may be empty (UTF-8). * @param pszPassword Password, may be empty (UTF-8). * @param pszDomain Domain name, may be empty (UTF-8). * @param fFlags VMMDEV_SETCREDENTIALS_*. */ DECLR3CALLBACKMEMBER(int, pfnSetCredentials,(PPDMIVMMDEVPORT pInterface, const char *pszUsername, const char *pszPassword, const char *pszDomain, uint32_t fFlags)); /** * Notify the driver about a VBVA status change. * * @returns Nothing. Because it is informational callback. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fEnabled Current VBVA status. */ DECLR3CALLBACKMEMBER(void, pfnVBVAChange, (PPDMIVMMDEVPORT pInterface, bool fEnabled)); /** * Issue a seamless mode change request. * * Note that there can only one request in the queue and that in case the guest does * not process it, issuing another request will overwrite the previous. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fEnabled Seamless mode enabled or not */ DECLR3CALLBACKMEMBER(int, pfnRequestSeamlessChange,(PPDMIVMMDEVPORT pInterface, bool fEnabled)); /** * Issue a memory balloon change request. * * Note that there can only one request in the queue and that in case the guest does * not process it, issuing another request will overwrite the previous. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param cMbBalloon Balloon size in megabytes */ DECLR3CALLBACKMEMBER(int, pfnSetMemoryBalloon,(PPDMIVMMDEVPORT pInterface, uint32_t cMbBalloon)); /** * Issue a statistcs interval change request. * * Note that there can only one request in the queue and that in case the guest does * not process it, issuing another request will overwrite the previous. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param cSecsStatInterval Statistics query interval in seconds * (0=disable). */ DECLR3CALLBACKMEMBER(int, pfnSetStatisticsInterval,(PPDMIVMMDEVPORT pInterface, uint32_t cSecsStatInterval)); /** * Notify the guest about a VRDP status change. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param fVRDPEnabled Current VRDP status. * @param uVRDPExperienceLevel Which visual effects to be disabled in * the guest. */ DECLR3CALLBACKMEMBER(int, pfnVRDPChange, (PPDMIVMMDEVPORT pInterface, bool fVRDPEnabled, uint32_t uVRDPExperienceLevel)); /** * Notify the guest of CPU hot-unplug event. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param idCpuCore The core id of the CPU to remove. * @param idCpuPackage The package id of the CPU to remove. */ DECLR3CALLBACKMEMBER(int, pfnCpuHotUnplug, (PPDMIVMMDEVPORT pInterface, uint32_t idCpuCore, uint32_t idCpuPackage)); /** * Notify the guest of CPU hot-plug event. * * @returns VBox status code * @param pInterface Pointer to the interface structure containing the called function pointer. * @param idCpuCore The core id of the CPU to add. * @param idCpuPackage The package id of the CPU to add. */ DECLR3CALLBACKMEMBER(int, pfnCpuHotPlug, (PPDMIVMMDEVPORT pInterface, uint32_t idCpuCore, uint32_t idCpuPackage)); } PDMIVMMDEVPORT; /** PDMIVMMDEVPORT interface ID. */ #define PDMIVMMDEVPORT_IID "d7e52035-3b6c-422e-9215-2a75646a945d" /** Pointer to a HPET legacy notification interface. */ typedef struct PDMIHPETLEGACYNOTIFY *PPDMIHPETLEGACYNOTIFY; /** * HPET legacy notification interface. */ typedef struct PDMIHPETLEGACYNOTIFY { /** * Notify about change of HPET legacy mode. * * @param pInterface Pointer to the interface structure containing the * called function pointer. * @param fActivated If HPET legacy mode is activated (@c true) or * deactivated (@c false). */ DECLR3CALLBACKMEMBER(void, pfnModeChanged,(PPDMIHPETLEGACYNOTIFY pInterface, bool fActivated)); } PDMIHPETLEGACYNOTIFY; /** PDMIHPETLEGACYNOTIFY interface ID. */ #define PDMIHPETLEGACYNOTIFY_IID "c9ada595-4b65-4311-8b21-b10498997774" /** @name Flags for PDMIVMMDEVPORT::pfnSetCredentials. * @{ */ /** The guest should perform a logon with the credentials. */ #define VMMDEV_SETCREDENTIALS_GUESTLOGON RT_BIT(0) /** The guest should prevent local logons. */ #define VMMDEV_SETCREDENTIALS_NOLOCALLOGON RT_BIT(1) /** The guest should verify the credentials. */ #define VMMDEV_SETCREDENTIALS_JUDGE RT_BIT(15) /** @} */ /** Forward declaration of the guest information structure. */ struct VBoxGuestInfo; /** Forward declaration of the guest information-2 structure. */ struct VBoxGuestInfo2; /** Forward declaration of the guest statistics structure */ struct VBoxGuestStatistics; /** Forward declaration of the guest status structure */ struct VBoxGuestStatus; /** Forward declaration of the video accelerator command memory. */ struct VBVAMEMORY; /** Pointer to video accelerator command memory. */ typedef struct VBVAMEMORY *PVBVAMEMORY; /** Pointer to a VMMDev connector interface. */ typedef struct PDMIVMMDEVCONNECTOR *PPDMIVMMDEVCONNECTOR; /** * VMMDev connector interface (up). * Pair with PDMIVMMDEVPORT. */ typedef struct PDMIVMMDEVCONNECTOR { /** * Update guest facility status. * * Called in response to VMMDevReq_ReportGuestStatus, reset or state restore. * * @param pInterface Pointer to this interface. * @param uFacility The facility. * @param uStatus The status. * @param fFlags Flags assoicated with the update. Currently * reserved and should be ignored. * @param pTimeSpecTS Pointer to the timestamp of this report. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnUpdateGuestStatus,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t uFacility, uint16_t uStatus, uint32_t fFlags, PCRTTIMESPEC pTimeSpecTS)); /** * Updates a guest user state. * * Called in response to VMMDevReq_ReportGuestUserState. * * @param pInterface Pointer to this interface. * @param pszUser Guest user name to update status for. * @param pszDomain Domain the guest user is bound to. Optional. * @param uState New guest user state to notify host about. * @param pabDetails Pointer to optional state data. * @param cbDetails Size (in bytes) of optional state data. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnUpdateGuestUserState,(PPDMIVMMDEVCONNECTOR pInterface, const char *pszUser, const char *pszDomain, uint32_t uState, const uint8_t *pabDetails, uint32_t cbDetails)); /** * Reports the guest API and OS version. * Called whenever the Additions issue a guest info report request. * * @param pInterface Pointer to this interface. * @param pGuestInfo Pointer to guest information structure * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnUpdateGuestInfo,(PPDMIVMMDEVCONNECTOR pInterface, const struct VBoxGuestInfo *pGuestInfo)); /** * Reports the detailed Guest Additions version. * * @param pInterface Pointer to this interface. * @param uFullVersion The guest additions version as a full version. * Use VBOX_FULL_VERSION_GET_MAJOR, * VBOX_FULL_VERSION_GET_MINOR and * VBOX_FULL_VERSION_GET_BUILD to access it. * (This will not be zero, so turn down the * paranoia level a notch.) * @param pszName Pointer to the sanitized version name. This can * be empty, but will not be NULL. If not empty, * it will contain a build type tag and/or a * publisher tag. If both, then they are separated * by an underscore (VBOX_VERSION_STRING fashion). * @param uRevision The SVN revision. Can be 0. * @param fFeatures Feature mask, currently none are defined. * * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnUpdateGuestInfo2,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t uFullVersion, const char *pszName, uint32_t uRevision, uint32_t fFeatures)); /** * Update the guest additions capabilities. * This is called when the guest additions capabilities change. The new capabilities * are given and the connector should update its internal state. * * @param pInterface Pointer to this interface. * @param newCapabilities New capabilities. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnUpdateGuestCapabilities,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t newCapabilities)); /** * Update the mouse capabilities. * This is called when the mouse capabilities change. The new capabilities * are given and the connector should update its internal state. * * @param pInterface Pointer to this interface. * @param newCapabilities New capabilities. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnUpdateMouseCapabilities,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t newCapabilities)); /** * Update the pointer shape. * This is called when the mouse pointer shape changes. The new shape * is passed as a caller allocated buffer that will be freed after returning * * @param pInterface Pointer to this interface. * @param fVisible Visibility indicator (if false, the other parameters are undefined). * @param fAlpha Flag whether alpha channel is being passed. * @param xHot Pointer hot spot x coordinate. * @param yHot Pointer hot spot y coordinate. * @param x Pointer new x coordinate on screen. * @param y Pointer new y coordinate on screen. * @param cx Pointer width in pixels. * @param cy Pointer height in pixels. * @param cbScanline Size of one scanline in bytes. * @param pvShape New shape buffer. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnUpdatePointerShape,(PPDMIVMMDEVCONNECTOR pInterface, bool fVisible, bool fAlpha, uint32_t xHot, uint32_t yHot, uint32_t cx, uint32_t cy, void *pvShape)); /** * Enable or disable video acceleration on behalf of guest. * * @param pInterface Pointer to this interface. * @param fEnable Whether to enable acceleration. * @param pVbvaMemory Video accelerator memory. * @return VBox rc. VINF_SUCCESS if VBVA was enabled. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnVideoAccelEnable,(PPDMIVMMDEVCONNECTOR pInterface, bool fEnable, PVBVAMEMORY pVbvaMemory)); /** * Force video queue processing. * * @param pInterface Pointer to this interface. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(void, pfnVideoAccelFlush,(PPDMIVMMDEVCONNECTOR pInterface)); /** * Return whether the given video mode is supported/wanted by the host. * * @returns VBox status code * @param pInterface Pointer to this interface. * @param display The guest monitor, 0 for primary. * @param cy Video mode horizontal resolution in pixels. * @param cx Video mode vertical resolution in pixels. * @param cBits Video mode bits per pixel. * @param pfSupported Where to put the indicator for whether this mode is supported. (output) * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnVideoModeSupported,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t display, uint32_t cx, uint32_t cy, uint32_t cBits, bool *pfSupported)); /** * Queries by how many pixels the height should be reduced when calculating video modes * * @returns VBox status code * @param pInterface Pointer to this interface. * @param pcyReduction Pointer to the result value. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnGetHeightReduction,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t *pcyReduction)); /** * Informs about a credentials judgement result from the guest. * * @returns VBox status code * @param pInterface Pointer to this interface. * @param fFlags Judgement result flags. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnSetCredentialsJudgementResult,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t fFlags)); /** * Set the visible region of the display * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param cRect Number of rectangles in pRect * @param pRect Rectangle array * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnSetVisibleRegion,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t cRect, PRTRECT pRect)); /** * Query the visible region of the display * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pcRect Number of rectangles in pRect * @param pRect Rectangle array (set to NULL to query the number of rectangles) * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnQueryVisibleRegion,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t *pcRect, PRTRECT pRect)); /** * Request the statistics interval * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pulInterval Pointer to interval in seconds * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnQueryStatisticsInterval,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t *pulInterval)); /** * Report new guest statistics * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pGuestStats Guest statistics * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnReportStatistics,(PPDMIVMMDEVCONNECTOR pInterface, struct VBoxGuestStatistics *pGuestStats)); /** * Query the current balloon size * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pcbBalloon Balloon size * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnQueryBalloonSize,(PPDMIVMMDEVCONNECTOR pInterface, uint32_t *pcbBalloon)); /** * Query the current page fusion setting * * @returns VBox status code. * @param pInterface Pointer to this interface. * @param pfPageFusionEnabled Pointer to boolean * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnIsPageFusionEnabled,(PPDMIVMMDEVCONNECTOR pInterface, bool *pfPageFusionEnabled)); } PDMIVMMDEVCONNECTOR; /** PDMIVMMDEVCONNECTOR interface ID. */ #define PDMIVMMDEVCONNECTOR_IID "aff90240-a443-434e-9132-80c186ab97d4" /** * Generic status LED core. * Note that a unit doesn't have to support all the indicators. */ typedef union PDMLEDCORE { /** 32-bit view. */ uint32_t volatile u32; /** Bit view. */ struct { /** Reading/Receiving indicator. */ uint32_t fReading : 1; /** Writing/Sending indicator. */ uint32_t fWriting : 1; /** Busy indicator. */ uint32_t fBusy : 1; /** Error indicator. */ uint32_t fError : 1; } s; } PDMLEDCORE; /** LED bit masks for the u32 view. * @{ */ /** Reading/Receiving indicator. */ #define PDMLED_READING RT_BIT(0) /** Writing/Sending indicator. */ #define PDMLED_WRITING RT_BIT(1) /** Busy indicator. */ #define PDMLED_BUSY RT_BIT(2) /** Error indicator. */ #define PDMLED_ERROR RT_BIT(3) /** @} */ /** * Generic status LED. * Note that a unit doesn't have to support all the indicators. */ typedef struct PDMLED { /** Just a magic for sanity checking. */ uint32_t u32Magic; uint32_t u32Alignment; /**< structure size alignment. */ /** The actual LED status. * Only the device is allowed to change this. */ PDMLEDCORE Actual; /** The asserted LED status which is cleared by the reader. * The device will assert the bits but never clear them. * The driver clears them as it sees fit. */ PDMLEDCORE Asserted; } PDMLED; /** Pointer to an LED. */ typedef PDMLED *PPDMLED; /** Pointer to a const LED. */ typedef const PDMLED *PCPDMLED; /** Magic value for PDMLED::u32Magic. */ #define PDMLED_MAGIC UINT32_C(0x11335577) /** Pointer to an LED ports interface. */ typedef struct PDMILEDPORTS *PPDMILEDPORTS; /** * Interface for exporting LEDs (down). * Pair with PDMILEDCONNECTORS. */ typedef struct PDMILEDPORTS { /** * Gets the pointer to the status LED of a unit. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit which status LED we desire. * @param ppLed Where to store the LED pointer. */ DECLR3CALLBACKMEMBER(int, pfnQueryStatusLed,(PPDMILEDPORTS pInterface, unsigned iLUN, PPDMLED *ppLed)); } PDMILEDPORTS; /** PDMILEDPORTS interface ID. */ #define PDMILEDPORTS_IID "435e0cec-8549-4ca0-8c0d-98e52f1dc038" /** Pointer to an LED connectors interface. */ typedef struct PDMILEDCONNECTORS *PPDMILEDCONNECTORS; /** * Interface for reading LEDs (up). * Pair with PDMILEDPORTS. */ typedef struct PDMILEDCONNECTORS { /** * Notification about a unit which have been changed. * * The driver must discard any pointers to data owned by * the unit and requery it. * * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit number. */ DECLR3CALLBACKMEMBER(void, pfnUnitChanged,(PPDMILEDCONNECTORS pInterface, unsigned iLUN)); } PDMILEDCONNECTORS; /** PDMILEDCONNECTORS interface ID. */ #define PDMILEDCONNECTORS_IID "8ed63568-82a7-4193-b57b-db8085ac4495" /** Pointer to a Media Notification interface. */ typedef struct PDMIMEDIANOTIFY *PPDMIMEDIANOTIFY; /** * Interface for exporting Medium eject information (up). No interface pair. */ typedef struct PDMIMEDIANOTIFY { /** * Signals that the medium was ejected. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit which had the medium ejected. */ DECLR3CALLBACKMEMBER(int, pfnEjected,(PPDMIMEDIANOTIFY pInterface, unsigned iLUN)); } PDMIMEDIANOTIFY; /** PDMIMEDIANOTIFY interface ID. */ #define PDMIMEDIANOTIFY_IID "fc22d53e-feb1-4a9c-b9fb-0a990a6ab288" /** The special status unit number */ #define PDM_STATUS_LUN 999 #ifdef VBOX_WITH_HGCM /** Abstract HGCM command structure. Used only to define a typed pointer. */ struct VBOXHGCMCMD; /** Pointer to HGCM command structure. This pointer is unique and identifies * the command being processed. The pointer is passed to HGCM connector methods, * and must be passed back to HGCM port when command is completed. */ typedef struct VBOXHGCMCMD *PVBOXHGCMCMD; /** Pointer to a HGCM port interface. */ typedef struct PDMIHGCMPORT *PPDMIHGCMPORT; /** * Host-Guest communication manager port interface (down). Normally implemented * by VMMDev. * Pair with PDMIHGCMCONNECTOR. */ typedef struct PDMIHGCMPORT { /** * Notify the guest on a command completion. * * @param pInterface Pointer to this interface. * @param rc The return code (VBox error code). * @param pCmd A pointer that identifies the completed command. * * @returns VBox status code */ DECLR3CALLBACKMEMBER(void, pfnCompleted,(PPDMIHGCMPORT pInterface, int32_t rc, PVBOXHGCMCMD pCmd)); } PDMIHGCMPORT; /** PDMIHGCMPORT interface ID. */ # define PDMIHGCMPORT_IID "e00a0cbf-b75a-45c3-87f4-41cddbc5ae0b" /** Pointer to a HGCM service location structure. */ typedef struct HGCMSERVICELOCATION *PHGCMSERVICELOCATION; /** Pointer to a HGCM connector interface. */ typedef struct PDMIHGCMCONNECTOR *PPDMIHGCMCONNECTOR; /** * The Host-Guest communication manager connector interface (up). Normally * implemented by Main::VMMDevInterface. * Pair with PDMIHGCMPORT. */ typedef struct PDMIHGCMCONNECTOR { /** * Locate a service and inform it about a client connection. * * @param pInterface Pointer to this interface. * @param pCmd A pointer that identifies the command. * @param pServiceLocation Pointer to the service location structure. * @param pu32ClientID Where to store the client id for the connection. * @return VBox status code. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnConnect,(PPDMIHGCMCONNECTOR pInterface, PVBOXHGCMCMD pCmd, PHGCMSERVICELOCATION pServiceLocation, uint32_t *pu32ClientID)); /** * Disconnect from service. * * @param pInterface Pointer to this interface. * @param pCmd A pointer that identifies the command. * @param u32ClientID The client id returned by the pfnConnect call. * @return VBox status code. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnDisconnect,(PPDMIHGCMCONNECTOR pInterface, PVBOXHGCMCMD pCmd, uint32_t u32ClientID)); /** * Process a guest issued command. * * @param pInterface Pointer to this interface. * @param pCmd A pointer that identifies the command. * @param u32ClientID The client id returned by the pfnConnect call. * @param u32Function Function to be performed by the service. * @param cParms Number of parameters in the array pointed to by paParams. * @param paParms Pointer to an array of parameters. * @return VBox status code. * @thread The emulation thread. */ DECLR3CALLBACKMEMBER(int, pfnCall,(PPDMIHGCMCONNECTOR pInterface, PVBOXHGCMCMD pCmd, uint32_t u32ClientID, uint32_t u32Function, uint32_t cParms, PVBOXHGCMSVCPARM paParms)); } PDMIHGCMCONNECTOR; /** PDMIHGCMCONNECTOR interface ID. */ # define PDMIHGCMCONNECTOR_IID "a1104758-c888-4437-8f2a-7bac17865b5c" #endif /* VBOX_WITH_HGCM */ /** Pointer to a display VBVA callbacks interface. */ typedef struct PDMIDISPLAYVBVACALLBACKS *PPDMIDISPLAYVBVACALLBACKS; /** * Display VBVA callbacks interface (up). */ typedef struct PDMIDISPLAYVBVACALLBACKS { /** * Informs guest about completion of processing the given Video HW Acceleration * command, does not wait for the guest to process the command. * * @returns ??? * @param pInterface Pointer to this interface. * @param pCmd The Video HW Acceleration Command that was * completed. */ DECLR3CALLBACKMEMBER(int, pfnVHWACommandCompleteAsync, (PPDMIDISPLAYVBVACALLBACKS pInterface, PVBOXVHWACMD pCmd)); DECLR3CALLBACKMEMBER(int, pfnCrHgsmiCommandCompleteAsync, (PPDMIDISPLAYVBVACALLBACKS pInterface, struct VBOXVDMACMD_CHROMIUM_CMD* pCmd, int rc)); DECLR3CALLBACKMEMBER(int, pfnCrHgsmiControlCompleteAsync, (PPDMIDISPLAYVBVACALLBACKS pInterface, struct VBOXVDMACMD_CHROMIUM_CTL* pCmd, int rc)); DECLR3CALLBACKMEMBER(int, pfnCrCtlSubmit, (PPDMIDISPLAYVBVACALLBACKS pInterface, struct VBOXCRCMDCTL* pCmd, uint32_t cbCmd, PFNCRCTLCOMPLETION pfnCompletion, void *pvCompletion)); DECLR3CALLBACKMEMBER(int, pfnCrCtlSubmitSync, (PPDMIDISPLAYVBVACALLBACKS pInterface, struct VBOXCRCMDCTL* pCmd, uint32_t cbCmd)); } PDMIDISPLAYVBVACALLBACKS; /** PDMIDISPLAYVBVACALLBACKS */ #define PDMIDISPLAYVBVACALLBACKS_IID "ddac0bd0-332d-4671-8853-732921a80216" /** Pointer to a PCI raw connector interface. */ typedef struct PDMIPCIRAWCONNECTOR *PPDMIPCIRAWCONNECTOR; /** * PCI raw connector interface (up). */ typedef struct PDMIPCIRAWCONNECTOR { /** * */ DECLR3CALLBACKMEMBER(int, pfnDeviceConstructComplete, (PPDMIPCIRAWCONNECTOR pInterface, const char *pcszName, uint32_t uHostPciAddress, uint32_t uGuestPciAddress, int rc)); } PDMIPCIRAWCONNECTOR; /** PDMIPCIRAWCONNECTOR interface ID. */ #define PDMIPCIRAWCONNECTOR_IID "14aa9c6c-8869-4782-9dfc-910071a6aebf" /** @} */ RT_C_DECLS_END #endif