/** @file * VUSB - VirtualBox USB. (DEV,VMM) */ /* * Copyright (C) 2006-2007 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___VBox_vusb_h #define ___VBox_vusb_h #include #include struct PDMLED; RT_C_DECLS_BEGIN /** @defgroup grp_vusb VBox USB API * @{ */ /** @defgroup grp_vusb_std Standard Stuff * @{ */ /** Frequency of USB bus (from spec). */ #define VUSB_BUS_HZ 12000000 /** @name USB Descriptor types (from spec) * @{ */ #define VUSB_DT_DEVICE 0x01 #define VUSB_DT_CONFIG 0x02 #define VUSB_DT_STRING 0x03 #define VUSB_DT_INTERFACE 0x04 #define VUSB_DT_ENDPOINT 0x05 #define VUSB_DT_DEVICE_QUALIFIER 0x06 #define VUSB_DT_OTHER_SPEED_CFG 0x07 #define VUSB_DT_INTERFACE_POWER 0x08 /** @} */ /** @name USB Descriptor minimum sizes (from spec) * @{ */ #define VUSB_DT_DEVICE_MIN_LEN 18 #define VUSB_DT_CONFIG_MIN_LEN 9 #define VUSB_DT_CONFIG_STRING_MIN_LEN 2 #define VUSB_DT_INTERFACE_MIN_LEN 9 #define VUSB_DT_ENDPOINT_MIN_LEN 7 /** @} */ #pragma pack(1) /* ensure byte packing of the descriptors. */ /** * USB language id descriptor (from specs). */ typedef struct VUSBDESCLANGID { uint8_t bLength; uint8_t bDescriptorType; } VUSBDESCLANGID; /** Pointer to a USB language id descriptor. */ typedef VUSBDESCLANGID *PVUSBDESCLANGID; /** Pointer to a const USB language id descriptor. */ typedef const VUSBDESCLANGID *PCVUSBDESCLANGID; /** * USB string descriptor (from specs). */ typedef struct VUSBDESCSTRING { uint8_t bLength; uint8_t bDescriptorType; } VUSBDESCSTRING; /** Pointer to a USB string descriptor. */ typedef VUSBDESCSTRING *PVUSBDESCSTRING; /** Pointer to a const USB string descriptor. */ typedef const VUSBDESCSTRING *PCVUSBDESCSTRING; /** * USB device descriptor (from spec) */ typedef struct VUSBDESCDEVICE { uint8_t bLength; uint8_t bDescriptorType; uint16_t bcdUSB; uint8_t bDeviceClass; uint8_t bDeviceSubClass; uint8_t bDeviceProtocol; uint8_t bMaxPacketSize0; uint16_t idVendor; uint16_t idProduct; uint16_t bcdDevice; uint8_t iManufacturer; uint8_t iProduct; uint8_t iSerialNumber; uint8_t bNumConfigurations; } VUSBDESCDEVICE; /** Pointer to a USB device descriptor. */ typedef VUSBDESCDEVICE *PVUSBDESCDEVICE; /** Pointer to a const USB device descriptor. */ typedef const VUSBDESCDEVICE *PCVUSBDESCDEVICE; /** * USB configuration descriptor (from spec). */ typedef struct VUSBDESCCONFIG { uint8_t bLength; uint8_t bDescriptorType; uint16_t wTotalLength; /**< recalculated by VUSB when involved in URB. */ uint8_t bNumInterfaces; uint8_t bConfigurationValue; uint8_t iConfiguration; uint8_t bmAttributes; uint8_t MaxPower; } VUSBDESCCONFIG; /** Pointer to a USB configuration descriptor. */ typedef VUSBDESCCONFIG *PVUSBDESCCONFIG; /** Pointer to a readonly USB configuration descriptor. */ typedef const VUSBDESCCONFIG *PCVUSBDESCCONFIG; /** * USB interface descriptor (from spec) */ typedef struct VUSBDESCINTERFACE { uint8_t bLength; uint8_t bDescriptorType; uint8_t bInterfaceNumber; uint8_t bAlternateSetting; uint8_t bNumEndpoints; uint8_t bInterfaceClass; uint8_t bInterfaceSubClass; uint8_t bInterfaceProtocol; uint8_t iInterface; } VUSBDESCINTERFACE; /** Pointer to an USB interface descriptor. */ typedef VUSBDESCINTERFACE *PVUSBDESCINTERFACE; /** Pointer to a const USB interface descriptor. */ typedef const VUSBDESCINTERFACE *PCVUSBDESCINTERFACE; /** * USB endpoint descriptor (from spec) */ typedef struct VUSBDESCENDPOINT { uint8_t bLength; uint8_t bDescriptorType; uint8_t bEndpointAddress; uint8_t bmAttributes; uint16_t wMaxPacketSize; uint8_t bInterval; } VUSBDESCENDPOINT; /** Pointer to an USB endpoint descriptor. */ typedef VUSBDESCENDPOINT *PVUSBDESCENDPOINT; /** Pointer to a const USB endpoint descriptor. */ typedef const VUSBDESCENDPOINT *PCVUSBDESCENDPOINT; #pragma pack() /* end of the byte packing. */ /** * USB configuration descriptor, the parsed variant used by VUSB. */ typedef struct VUSBDESCCONFIGEX { /** The USB descriptor data. * @remark The wTotalLength member is recalculated before the data is passed to the guest. */ VUSBDESCCONFIG Core; /** Pointer to additional descriptor bytes following what's covered by VUSBDESCCONFIG. */ void *pvMore; /** Pointer to an array of the interfaces referenced in the configuration. * Core.bNumInterfaces in size. */ const struct VUSBINTERFACE *paIfs; } VUSBDESCCONFIGEX; /** Pointer to a parsed USB configuration descriptor. */ typedef VUSBDESCCONFIGEX *PVUSBDESCCONFIGEX; /** Pointer to a const parsed USB configuration descriptor. */ typedef const VUSBDESCCONFIGEX *PCVUSBDESCCONFIGEX; /** * For tracking the alternate interface settings of a configuration. */ typedef struct VUSBINTERFACE { /** Pointer to an array of interfaces. */ const struct VUSBDESCINTERFACEEX *paSettings; /** The number of entries in the array. */ uint32_t cSettings; } VUSBINTERFACE; /** Pointer to a VUSBINTERFACE. */ typedef VUSBINTERFACE *PVUSBINTERFACE; /** Pointer to a const VUSBINTERFACE. */ typedef const VUSBINTERFACE *PCVUSBINTERFACE; /** * USB interface descriptor, the parsed variant used by VUSB. */ typedef struct VUSBDESCINTERFACEEX { /** The USB descriptor data. */ VUSBDESCINTERFACE Core; /** Pointer to additional descriptor bytes following what's covered by VUSBDESCINTERFACE. */ const void *pvMore; /** Pointer to additional class- or vendor-specific interface descriptors. */ const void *pvClass; /** Size of class- or vendor-specific descriptors. */ uint16_t cbClass; /** Pointer to an array of the endpoints referenced by the interface. * Core.bNumEndpoints in size. */ const struct VUSBDESCENDPOINTEX *paEndpoints; } VUSBDESCINTERFACEEX; /** Pointer to an prased USB interface descriptor. */ typedef VUSBDESCINTERFACEEX *PVUSBDESCINTERFACEEX; /** Pointer to a const parsed USB interface descriptor. */ typedef const VUSBDESCINTERFACEEX *PCVUSBDESCINTERFACEEX; /** * USB endpoint descriptor, the parsed variant used by VUSB. */ typedef struct VUSBDESCENDPOINTEX { /** The USB descriptor data. * @remark The wMaxPacketSize member is converted to native endian. */ VUSBDESCENDPOINT Core; /** Pointer to additional descriptor bytes following what's covered by VUSBDESCENDPOINT. */ const void *pvMore; /** Pointer to additional class- or vendor-specific interface descriptors. */ const void *pvClass; /** Size of class- or vendor-specific descriptors. */ uint16_t cbClass; } VUSBDESCENDPOINTEX; /** Pointer to a parsed USB endpoint descriptor. */ typedef VUSBDESCENDPOINTEX *PVUSBDESCENDPOINTEX; /** Pointer to a const parsed USB endpoint descriptor. */ typedef const VUSBDESCENDPOINTEX *PCVUSBDESCENDPOINTEX; /** @name USB Control message recipient codes (from spec) * @{ */ #define VUSB_TO_DEVICE 0x0 #define VUSB_TO_INTERFACE 0x1 #define VUSB_TO_ENDPOINT 0x2 #define VUSB_TO_OTHER 0x3 #define VUSB_RECIP_MASK 0x1f /** @} */ /** @name USB control pipe setup packet structure (from spec) * @{ */ #define VUSB_REQ_SHIFT (5) #define VUSB_REQ_STANDARD (0x0 << VUSB_REQ_SHIFT) #define VUSB_REQ_CLASS (0x1 << VUSB_REQ_SHIFT) #define VUSB_REQ_VENDOR (0x2 << VUSB_REQ_SHIFT) #define VUSB_REQ_RESERVED (0x3 << VUSB_REQ_SHIFT) #define VUSB_REQ_MASK (0x3 << VUSB_REQ_SHIFT) /** @} */ #define VUSB_DIR_TO_DEVICE 0x00 #define VUSB_DIR_TO_HOST 0x80 #define VUSB_DIR_MASK 0x80 /** * USB Setup request (from spec) */ typedef struct vusb_setup { uint8_t bmRequestType; uint8_t bRequest; uint16_t wValue; uint16_t wIndex; uint16_t wLength; } VUSBSETUP; /** Pointer to a setup request. */ typedef VUSBSETUP *PVUSBSETUP; /** Pointer to a const setup request. */ typedef const VUSBSETUP *PCVUSBSETUP; /** @name USB Standard device requests (from spec) * @{ */ #define VUSB_REQ_GET_STATUS 0x00 #define VUSB_REQ_CLEAR_FEATURE 0x01 #define VUSB_REQ_SET_FEATURE 0x03 #define VUSB_REQ_SET_ADDRESS 0x05 #define VUSB_REQ_GET_DESCRIPTOR 0x06 #define VUSB_REQ_SET_DESCRIPTOR 0x07 #define VUSB_REQ_GET_CONFIGURATION 0x08 #define VUSB_REQ_SET_CONFIGURATION 0x09 #define VUSB_REQ_GET_INTERFACE 0x0a #define VUSB_REQ_SET_INTERFACE 0x0b #define VUSB_REQ_SYNCH_FRAME 0x0c #define VUSB_REQ_MAX 0x0d /** @} */ /** @} */ /* end of grp_vusb_std */ /** @name USB Standard version flags. * @{ */ /** Indicates USB 1.1 support. */ #define VUSB_STDVER_11 RT_BIT(1) /** Indicates USB 2.0 support. */ #define VUSB_STDVER_20 RT_BIT(2) /** @} */ /** Pointer to a VBox USB device interface. */ typedef struct VUSBIDEVICE *PVUSBIDEVICE; /** Pointer to a VUSB RootHub port interface. */ typedef struct VUSBIROOTHUBPORT *PVUSBIROOTHUBPORT; /** Pointer to an USB request descriptor. */ typedef struct VUSBURB *PVUSBURB; /** * VBox USB port bitmap. * * Bit 0 == Port 0, ... , Bit 127 == Port 127. */ typedef struct VUSBPORTBITMAP { /** 128 bits */ char ach[16]; } VUSBPORTBITMAP; /** Pointer to a VBox USB port bitmap. */ typedef VUSBPORTBITMAP *PVUSBPORTBITMAP; #ifndef RDESKTOP /** * The VUSB RootHub port interface provided by the HCI (down). * Pair with VUSBIROOTCONNECTOR */ typedef struct VUSBIROOTHUBPORT { /** * Get the number of available ports in the hub. * * @returns The number of ports available. * @param pInterface Pointer to this structure. * @param pAvailable Bitmap indicating the available ports. Set bit == available port. */ DECLR3CALLBACKMEMBER(unsigned, pfnGetAvailablePorts,(PVUSBIROOTHUBPORT pInterface, PVUSBPORTBITMAP pAvailable)); /** * Gets the supported USB versions. * * @returns The mask of supported USB versions. * @param pInterface Pointer to this structure. */ DECLR3CALLBACKMEMBER(uint32_t, pfnGetUSBVersions,(PVUSBIROOTHUBPORT pInterface)); /** * A device is being attached to a port in the roothub. * * @param pInterface Pointer to this structure. * @param pDev Pointer to the device being attached. * @param uPort The port number assigned to the device. */ DECLR3CALLBACKMEMBER(int, pfnAttach,(PVUSBIROOTHUBPORT pInterface, PVUSBIDEVICE pDev, unsigned uPort)); /** * A device is being detached from a port in the roothub. * * @param pInterface Pointer to this structure. * @param pDev Pointer to the device being detached. * @param uPort The port number assigned to the device. */ DECLR3CALLBACKMEMBER(void, pfnDetach,(PVUSBIROOTHUBPORT pInterface, PVUSBIDEVICE pDev, unsigned uPort)); /** * Reset the root hub. * * @returns VBox status code. * @param pInterface Pointer to this structure. * @param pResetOnLinux Whether or not to do real reset on linux. */ DECLR3CALLBACKMEMBER(int, pfnReset,(PVUSBIROOTHUBPORT pInterface, bool fResetOnLinux)); /** * Transfer completion callback routine. * * VUSB will call this when a transfer have been completed * in a one or another way. * * @param pInterface Pointer to this structure. * @param pUrb Pointer to the URB in question. */ DECLR3CALLBACKMEMBER(void, pfnXferCompletion,(PVUSBIROOTHUBPORT pInterface, PVUSBURB urb)); /** * Handle transfer errors. * * VUSB calls this when a transfer attempt failed. This function will respond * indicating whether to retry or complete the URB with failure. * * @returns Retry indicator. * @param pInterface Pointer to this structure. * @param pUrb Pointer to the URB in question. */ DECLR3CALLBACKMEMBER(bool, pfnXferError,(PVUSBIROOTHUBPORT pInterface, PVUSBURB pUrb)); /** Alignment dummy. */ RTR3PTR Alignment; } VUSBIROOTHUBPORT; /** VUSBIROOTHUBPORT interface ID. */ #define VUSBIROOTHUBPORT_IID "e38e2978-7aa2-4860-94b6-9ef4a066d8a0" /** Pointer to a VUSB RootHub connector interface. */ typedef struct VUSBIROOTHUBCONNECTOR *PVUSBIROOTHUBCONNECTOR; /** * The VUSB RootHub connector interface provided by the VBox USB RootHub driver * (up). * Pair with VUSBIROOTHUBPORT. */ typedef struct VUSBIROOTHUBCONNECTOR { /** * Allocates a new URB for a transfer. * * Either submit using pfnSubmitUrb or free using VUSBUrbFree(). * * @returns Pointer to a new URB. * @returns NULL on failure - try again later. * This will not fail if the device wasn't found. We'll fail it * at submit time, since that makes the usage of this api simpler. * @param pInterface Pointer to this struct. * @param DstAddress The destination address of the URB. * @param cbData The amount of data space required. * @param cTds The amount of TD space. */ DECLR3CALLBACKMEMBER(PVUSBURB, pfnNewUrb,(PVUSBIROOTHUBCONNECTOR pInterface, uint8_t DstAddress, uint32_t cbData, uint32_t cTds)); /** * Submits a URB for transfer. * The transfer will do asynchronously if possible. * * @returns VBox status code. * @param pInterface Pointer to this struct. * @param pUrb Pointer to the URB returned by pfnNewUrb. * The URB will be freed in case of failure. * @param pLed Pointer to USB Status LED */ DECLR3CALLBACKMEMBER(int, pfnSubmitUrb,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, struct PDMLED *pLed)); /** * Call to service asynchronous URB completions in a polling fashion. * * Reaped URBs will be finished by calling the completion callback, * thus there is no return code or input or anything from this function * except for potential state changes elsewhere. * * @returns VINF_SUCCESS if no URBs are pending upon return. * @returns VERR_TIMEOUT if one or more URBs are still in flight upon returning. * @returns Other VBox status code. * * @param pInterface Pointer to this struct. * @param cMillies Number of milliseconds to poll for completion. */ DECLR3CALLBACKMEMBER(void, pfnReapAsyncUrbs,(PVUSBIROOTHUBCONNECTOR pInterface, RTMSINTERVAL cMillies)); /** * Cancels and completes - with CRC failure - all URBs queued on an endpoint. * This is done in response to guest URB cancellation. * * @returns VBox status code. * @param pInterface Pointer to this struct. * @param pUrb Pointer to a previously submitted URB. */ DECLR3CALLBACKMEMBER(int, pfnCancelUrbsEp,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb)); /** * Cancels and completes - with CRC failure - all in-flight async URBs. * This is typically done before saving a state. * * @param pInterface Pointer to this struct. */ DECLR3CALLBACKMEMBER(void, pfnCancelAllUrbs,(PVUSBIROOTHUBCONNECTOR pInterface)); /** * Attach the device to the root hub. * The device must not be attached to any hub for this call to succeed. * * @returns VBox status code. * @param pInterface Pointer to this struct. * @param pDevice Pointer to the device (interface) attach. */ DECLR3CALLBACKMEMBER(int, pfnAttachDevice,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)); /** * Detach the device from the root hub. * The device must already be attached for this call to succeed. * * @returns VBox status code. * @param pInterface Pointer to this struct. * @param pDevice Pointer to the device (interface) to detach. */ DECLR3CALLBACKMEMBER(int, pfnDetachDevice,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)); } VUSBIROOTHUBCONNECTOR; /** VUSBIROOTHUBCONNECTOR interface ID. */ #define VUSBIROOTHUBCONNECTOR_IID "d9a90c59-e3ff-4dff-9754-844557c3f7a0" #ifdef IN_RING3 /** @copydoc VUSBIROOTHUBCONNECTOR::pfnNewUrb */ DECLINLINE(PVUSBURB) VUSBIRhNewUrb(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t DstAddress, uint32_t cbData, uint32_t cTds) { return pInterface->pfnNewUrb(pInterface, DstAddress, cbData, cTds); } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnSubmitUrb */ DECLINLINE(int) VUSBIRhSubmitUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, struct PDMLED *pLed) { return pInterface->pfnSubmitUrb(pInterface, pUrb, pLed); } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnReapAsyncUrbs */ DECLINLINE(void) VUSBIRhReapAsyncUrbs(PVUSBIROOTHUBCONNECTOR pInterface, RTMSINTERVAL cMillies) { pInterface->pfnReapAsyncUrbs(pInterface, cMillies); } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnCancelAllUrbs */ DECLINLINE(void) VUSBIRhCancelAllUrbs(PVUSBIROOTHUBCONNECTOR pInterface) { pInterface->pfnCancelAllUrbs(pInterface); } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnAttachDevice */ DECLINLINE(int) VUSBIRhAttachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice) { return pInterface->pfnAttachDevice(pInterface, pDevice); } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnDetachDevice */ DECLINLINE(int) VUSBIRhDetachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice) { return pInterface->pfnDetachDevice(pInterface, pDevice); } #endif /* IN_RING3 */ /** Pointer to a Root Hub Configuration Interface. */ typedef struct VUSBIRHCONFIG *PVUSBIRHCONFIG; /** * Root Hub Configuration Interface (intended for MAIN). * No interface pair. */ typedef struct VUSBIRHCONFIG { /** * Creates a USB proxy device and attaches it to the root hub. * * @returns VBox status code. * @param pInterface Pointer to the root hub configuration interface structure. * @param pUuid Pointer to the UUID for the new device. * @param fRemote Whether the device must use the VRDP backend. * @param pszAddress OS specific device address. * @param pvBackend An opaque pointer for the backend. Only used by * the VRDP backend so far. */ DECLR3CALLBACKMEMBER(int, pfnCreateProxyDevice,(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid, bool fRemote, const char *pszAddress, void *pvBackend)); /** * Removes a USB proxy device from the root hub and destroys it. * * @returns VBox status code. * @param pInterface Pointer to the root hub configuration interface structure. * @param pUuid Pointer to the UUID for the device. */ DECLR3CALLBACKMEMBER(int, pfnDestroyProxyDevice,(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid)); } VUSBIRHCONFIG; /** VUSBIRHCONFIG interface ID. */ #define VUSBIRHCONFIG_IID "c354cd97-e85f-465e-bc12-b58798465f52" #ifdef IN_RING3 /** @copydoc VUSBIRHCONFIG::pfnCreateProxyDevice */ DECLINLINE(int) VUSBIRhCreateProxyDevice(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid, bool fRemote, const char *pszAddress, void *pvBackend) { return pInterface->pfnCreateProxyDevice(pInterface, pUuid, fRemote, pszAddress, pvBackend); } /** @copydoc VUSBIRHCONFIG::pfnDestroyProxyDevice */ DECLINLINE(int) VUSBIRhDestroyProxyDevice(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid) { return pInterface->pfnDestroyProxyDevice(pInterface, pUuid); } #endif /* IN_RING3 */ #endif /* ! RDESKTOP */ /** * VUSB device reset completion callback function. * This is called by the reset thread when the reset has been completed. * * @param pDev Pointer to the virtual USB device core. * @param rc The VBox status code of the reset operation. * @param pvUser User specific argument. * * @thread The reset thread or EMT. */ typedef DECLCALLBACK(void) FNVUSBRESETDONE(PVUSBIDEVICE pDevice, int rc, void *pvUser); /** Pointer to a device reset completion callback function (FNUSBRESETDONE). */ typedef FNVUSBRESETDONE *PFNVUSBRESETDONE; /** * The state of a VUSB Device. * * @remark The order of these states is vital. */ typedef enum VUSBDEVICESTATE { VUSB_DEVICE_STATE_INVALID = 0, VUSB_DEVICE_STATE_DETACHED, VUSB_DEVICE_STATE_ATTACHED, VUSB_DEVICE_STATE_POWERED, VUSB_DEVICE_STATE_DEFAULT, VUSB_DEVICE_STATE_ADDRESS, VUSB_DEVICE_STATE_CONFIGURED, VUSB_DEVICE_STATE_SUSPENDED, /** The device is being reset. Don't mess with it. * Next states: VUSB_DEVICE_STATE_DEFAULT, VUSB_DEVICE_STATE_DESTROYED */ VUSB_DEVICE_STATE_RESET, /** The device has been destroy. */ VUSB_DEVICE_STATE_DESTROYED, /** The usual 32-bit hack. */ VUSB_DEVICE_STATE_32BIT_HACK = 0x7fffffff } VUSBDEVICESTATE; #ifndef RDESKTOP /** * USB Device Interface (up). * No interface pair. */ typedef struct VUSBIDEVICE { /** * Resets the device. * * Since a device reset shall take at least 10ms from the guest point of view, * it must be performed asynchronously. We create a thread which performs this * operation and ensures it will take at least 10ms. * * At times - like init - a synchronous reset is required, this can be done * by passing NULL for pfnDone. * * -- internal stuff, move it -- * While the device is being reset it is in the VUSB_DEVICE_STATE_RESET state. * On completion it will be in the VUSB_DEVICE_STATE_DEFAULT state if successful, * or in the VUSB_DEVICE_STATE_DETACHED state if the rest failed. * -- internal stuff, move it -- * * @returns VBox status code. * @param pInterface Pointer to this structure. * @param fResetOnLinux Set if we can permit a real reset and a potential logical * device reconnect on linux hosts. * @param pfnDone Pointer to the completion routine. If NULL a synchronous * reset is preformed not respecting the 10ms. * @param pvUser User argument to the completion routine. * @param pVM Pointer to the VM handle if callback in EMT is required. (optional) */ DECLR3CALLBACKMEMBER(int, pfnReset,(PVUSBIDEVICE pInterface, bool fResetOnLinux, PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM)); /** * Powers on the device. * * @returns VBox status code. * @param pInterface Pointer to the device interface structure. */ DECLR3CALLBACKMEMBER(int, pfnPowerOn,(PVUSBIDEVICE pInterface)); /** * Powers off the device. * * @returns VBox status code. * @param pInterface Pointer to the device interface structure. */ DECLR3CALLBACKMEMBER(int, pfnPowerOff,(PVUSBIDEVICE pInterface)); /** * Get the state of the device. * * @returns Device state. * @param pInterface Pointer to the device interface structure. */ DECLR3CALLBACKMEMBER(VUSBDEVICESTATE, pfnGetState,(PVUSBIDEVICE pInterface)); } VUSBIDEVICE; /** VUSBIDEVICE interface ID. */ #define VUSBIDEVICE_IID "88732dd3-0ccd-4625-b040-48804ac7a217" #ifdef IN_RING3 /** * Resets the device. * * Since a device reset shall take at least 10ms from the guest point of view, * it must be performed asynchronously. We create a thread which performs this * operation and ensures it will take at least 10ms. * * At times - like init - a synchronous reset is required, this can be done * by passing NULL for pfnDone. * * -- internal stuff, move it -- * While the device is being reset it is in the VUSB_DEVICE_STATE_RESET state. * On completion it will be in the VUSB_DEVICE_STATE_DEFAULT state if successful, * or in the VUSB_DEVICE_STATE_DETACHED state if the rest failed. * -- internal stuff, move it -- * * @returns VBox status code. * @param pInterface Pointer to the device interface structure. * @param fResetOnLinux Set if we can permit a real reset and a potential logical * device reconnect on linux hosts. * @param pfnDone Pointer to the completion routine. If NULL a synchronous * reset is preformed not respecting the 10ms. * @param pvUser User argument to the completion routine. * @param pVM Pointer to the VM handle if callback in EMT is required. (optional) */ DECLINLINE(int) VUSBIDevReset(PVUSBIDEVICE pInterface, bool fResetOnLinux, PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM) { return pInterface->pfnReset(pInterface, fResetOnLinux, pfnDone, pvUser, pVM); } /** * Powers on the device. * * @returns VBox status code. * @param pInterface Pointer to the device interface structure. */ DECLINLINE(int) VUSBIDevPowerOn(PVUSBIDEVICE pInterface) { return pInterface->pfnPowerOn(pInterface); } /** * Powers off the device. * * @returns VBox status code. * @param pInterface Pointer to the device interface structure. */ DECLINLINE(int) VUSBIDevPowerOff(PVUSBIDEVICE pInterface) { return pInterface->pfnPowerOff(pInterface); } /** * Get the state of the device. * * @returns Device state. * @param pInterface Pointer to the device interface structure. */ DECLINLINE(VUSBDEVICESTATE) VUSBIDevGetState(PVUSBIDEVICE pInterface) { return pInterface->pfnGetState(pInterface); } #endif /* IN_RING3 */ #endif /* ! RDESKTOP */ /** @name URB * @{ */ /** * VUSB Transfer status codes. */ typedef enum VUSBSTATUS { /** Transer was ok. */ VUSBSTATUS_OK = 0, /** Transfer stalled, endpoint halted. */ VUSBSTATUS_STALL, /** Device not responding. */ VUSBSTATUS_DNR, /** CRC error. */ VUSBSTATUS_CRC, /** Data overrun error. */ VUSBSTATUS_DATA_UNDERRUN, /** Data overrun error. */ VUSBSTATUS_DATA_OVERRUN, /** The isochronous buffer hasn't been touched. */ VUSBSTATUS_NOT_ACCESSED, /** Canceled/undone URB (VUSB internal). */ VUSBSTATUS_UNDO, /** Invalid status. */ VUSBSTATUS_INVALID = 0x7f } VUSBSTATUS; /** * VUSB Transfer types. */ typedef enum VUSBXFERTYPE { /** Control message. Used to represent a single control transfer. */ VUSBXFERTYPE_CTRL = 0, /* Isochronous transfer. */ VUSBXFERTYPE_ISOC, /** Bulk transfer. */ VUSBXFERTYPE_BULK, /** Interrupt transfer. */ VUSBXFERTYPE_INTR, /** Complete control message. Used to represent an entire control message. */ VUSBXFERTYPE_MSG, /** Invalid transfer type. */ VUSBXFERTYPE_INVALID = 0x7f } VUSBXFERTYPE; /** * VUSB transfer direction. */ typedef enum VUSBDIRECTION { /** Setup */ VUSBDIRECTION_SETUP = 0, #define VUSB_DIRECTION_SETUP VUSBDIRECTION_SETUP /** In - Device to host. */ VUSBDIRECTION_IN = 1, #define VUSB_DIRECTION_IN VUSBDIRECTION_IN /** Out - Host to device. */ VUSBDIRECTION_OUT = 2, #define VUSB_DIRECTION_OUT VUSBDIRECTION_OUT /** Invalid direction */ VUSBDIRECTION_INVALID = 0x7f } VUSBDIRECTION; /** * The URB states */ typedef enum VUSBURBSTATE { /** The usual invalid state. */ VUSBURBSTATE_INVALID = 0, /** The URB is free, i.e. not in use. * Next state: ALLOCATED */ VUSBURBSTATE_FREE, /** The URB is allocated, i.e. being prepared for submission. * Next state: FREE, IN_FLIGHT */ VUSBURBSTATE_ALLOCATED, /** The URB is in flight. * Next state: REAPED, CANCELLED */ VUSBURBSTATE_IN_FLIGHT, /** The URB has been reaped and is being completed. * Next state: FREE */ VUSBURBSTATE_REAPED, /** The URB has been cancelled and is awaiting reaping and immediate freeing. * Next state: FREE */ VUSBURBSTATE_CANCELLED, /** The end of the valid states (exclusive). */ VUSBURBSTATE_END, /** The usual 32-bit blow up. */ VUSBURBSTATE_32BIT_HACK = 0x7fffffff } VUSBURBSTATE; /** * Information about a isochronous packet. */ typedef struct VUSBURBISOCPKT { /** The size of the packet. * IN: The packet size. I.e. the number of bytes to the next packet or end of buffer. * OUT: The actual size transferred. */ uint16_t cb; /** The offset of the packet. (Relative to VUSBURB::abData[0].) * OUT: This can be changed by the USB device if it does some kind of buffer squeezing. */ uint16_t off; /** The status of the transfer. * IN: VUSBSTATUS_INVALID * OUT: VUSBSTATUS_INVALID if nothing was done, otherwise the correct status. */ VUSBSTATUS enmStatus; } VUSBURBISOCPKT; /** Pointer to a isochronous packet. */ typedef VUSBURBISOCPKT *PVUSBURBISOCPTK; /** Pointer to a const isochronous packet. */ typedef const VUSBURBISOCPKT *PCVUSBURBISOCPKT; /** * Asynchronous USB request descriptor */ typedef struct VUSBURB { /** URB magic value. */ uint32_t u32Magic; /** The USR state. */ VUSBURBSTATE enmState; /** URB description, can be null. intended for logging. */ char *pszDesc; #ifdef RDESKTOP /** The next URB in rdesktop-vrdp's linked list */ PVUSBURB pNext; /** The previous URB in rdesktop-vrdp's linked list */ PVUSBURB pPrev; /** The vrdp handle for the URB */ uint32_t handle; /** Pointer used to find the usb proxy device */ struct VUSBDEV *pDev; #endif /** The VUSB data. */ struct VUSBURBVUSB { /** URB chain pointer. */ PVUSBURB pNext; /** URB chain pointer. */ PVUSBURB *ppPrev; /** Pointer to the original for control messages. */ PVUSBURB pCtrlUrb; /** Pointer to the VUSB device. * This may be NULL if the destination address is invalid. */ struct VUSBDEV *pDev; /** Sepcific to the pfnFree function. */ void *pvFreeCtx; /** * Callback which will free the URB once it's reaped and completed. * @param pUrb The URB. */ DECLCALLBACKMEMBER(void, pfnFree)(PVUSBURB pUrb); /** Submit timestamp. (logging only) */ uint64_t u64SubmitTS; /** The allocated data length. */ uint32_t cbDataAllocated; /** The allocated TD length. */ uint32_t cTdsAllocated; } VUsb; /** The host controller data. */ struct VUSBURBHCI { /** The endpoint descriptor address. */ RTGCPHYS32 EdAddr; /** Number of Tds in the array. */ uint32_t cTds; /** Pointer to an array of TD info items.*/ struct VUSBURBHCITD { /** Type of TD (private) */ uint32_t TdType; /** The address of the */ RTGCPHYS32 TdAddr; /** A copy of the TD. */ uint32_t TdCopy[16]; } *paTds; /** URB chain pointer. */ PVUSBURB pNext; /** When this URB was created. * (Used for isochronous frames and for logging.) */ uint32_t u32FrameNo; /** Flag indicating that the TDs have been unlinked. */ bool fUnlinked; } Hci; /** The device data. */ struct VUSBURBDEV { /** Pointer to private device specific data. */ void *pvPrivate; /** Used by the device when linking the URB in some list of its own. */ PVUSBURB pNext; } Dev; #ifndef RDESKTOP /** The USB device instance this belongs to. * This is NULL if the device address is invalid, in which case this belongs to the hub. */ PPDMUSBINS pUsbIns; #endif /** The device address. * This is set at allocation time. */ uint8_t DstAddress; /** The endpoint. * IN: Must be set before submitting the URB. * @remark This does not have the high bit (direction) set! */ uint8_t EndPt; /** The transfer type. * IN: Must be set before submitting the URB. */ VUSBXFERTYPE enmType; /** The transfer direction. * IN: Must be set before submitting the URB. */ VUSBDIRECTION enmDir; /** Indicates whether it is OK to receive/send less data than requested. * IN: Must be initialized before submitting the URB. */ bool fShortNotOk; /** The transfer status. * OUT: This is set when reaping the URB. */ VUSBSTATUS enmStatus; /** The number of isochronous packets describe in aIsocPkts. * This is ignored when enmType isn't VUSBXFERTYPE_ISOC. */ uint32_t cIsocPkts; /** The iso packets within abData. * This is ignored when enmType isn't VUSBXFERTYPE_ISOC. */ VUSBURBISOCPKT aIsocPkts[8]; /** The message length. * IN: The amount of data to send / receive - set at allocation time. * OUT: The amount of data sent / received. */ uint32_t cbData; /** The message data. * IN: On host to device transfers, the data to send. * OUT: On device to host transfers, the data to received. */ uint8_t abData[8*_1K]; } VUSBURB; /** The magic value of a valid VUSBURB. (Murakami Haruki) */ #define VUSBURB_MAGIC UINT32_C(0x19490112) /** @} */ /** @} */ RT_C_DECLS_END #endif