/* $Id: dbg.h 25645 2010-01-05 09:29:31Z vboxsync $ */ /** @file * IPRT - Debugging Routines. */ /* * Copyright (C) 2008-2009 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ #ifndef ___iprt_dbg_h #define ___iprt_dbg_h #include #include RT_C_DECLS_BEGIN /** @defgroup grp_rt_dbg RTDbg - Debugging Routines * @ingroup grp_rt * @{ */ /** Debug segment index. */ typedef uint32_t RTDBGSEGIDX; /** Pointer to a debug segment index. */ typedef RTDBGSEGIDX *PRTDBGSEGIDX; /** Pointer to a const debug segment index. */ typedef RTDBGSEGIDX const *PCRTDBGSEGIDX; /** NIL debug segment index. */ #define NIL_RTDBGSEGIDX UINT32_C(0xffffffff) /** The last normal segment index. */ #define RTDBGSEGIDX_LAST UINT32_C(0xffffffef) /** Special segment index that indicates that the offset is a relative * virtual address (RVA). I.e. an offset from the start of the module. */ #define RTDBGSEGIDX_RVA UINT32_C(0xfffffff0) /** Special segment index that indicates that the offset is a absolute. */ #define RTDBGSEGIDX_ABS UINT32_C(0xfffffff1) /** The last valid special segment index. */ #define RTDBGSEGIDX_SPECIAL_LAST RTDBGSEGIDX_ABS /** The last valid special segment index. */ #define RTDBGSEGIDX_SPECIAL_FIRST (RTDBGSEGIDX_LAST + 1U) /** Max length (including '\\0') of a segment name. */ #define RTDBG_SEGMENT_NAME_LENGTH (128 - 8 - 8 - 8 - 4 - 4) /** * Debug module segment. */ typedef struct RTDBGSEGMENT { /** The load address. * RTUINTPTR_MAX if not applicable. */ RTUINTPTR Address; /** The image relative virtual address of the segment. * RTUINTPTR_MAX if not applicable. */ RTUINTPTR uRva; /** The segment size. */ RTUINTPTR cb; /** The segment flags. (reserved) */ uint32_t fFlags; /** The segment index. */ RTDBGSEGIDX iSeg; /** Symbol name. */ char szName[RTDBG_SEGMENT_NAME_LENGTH]; } RTDBGSEGMENT; /** Pointer to a debug module segment. */ typedef RTDBGSEGMENT *PRTDBGSEGMENT; /** Pointer to a const debug module segment. */ typedef RTDBGSEGMENT const *PCRTDBGSEGMENT; /** Max length (including '\\0') of a symbol name. */ #define RTDBG_SYMBOL_NAME_LENGTH (384 - 8 - 8 - 8 - 4 - 4 - 8) /** * Debug symbol. */ typedef struct RTDBGSYMBOL { /** Symbol value (address). * This depends a bit who you ask. It will be the same as offSeg when you * as RTDbgMod, but the mapping address if you ask RTDbgAs. */ RTUINTPTR Value; /** Symbol size. */ RTUINTPTR cb; /** Offset into the segment specified by iSeg. */ RTUINTPTR offSeg; /** Segment number. */ RTDBGSEGIDX iSeg; /** Symbol Flags. (reserved). */ uint32_t fFlags; /** Symbol ordinal. * This is set to UINT32_MAX if the ordinals aren't supported. */ uint32_t iOrdinal; /** Symbol name. */ char szName[RTDBG_SYMBOL_NAME_LENGTH]; } RTDBGSYMBOL; /** Pointer to debug symbol. */ typedef RTDBGSYMBOL *PRTDBGSYMBOL; /** Pointer to const debug symbol. */ typedef const RTDBGSYMBOL *PCRTDBGSYMBOL; /** * Allocate a new symbol structure. * * @returns Pointer to a new structure on success, NULL on failure. */ RTDECL(PRTDBGSYMBOL) RTDbgSymbolAlloc(void); /** * Duplicates a symbol structure. * * @returns Pointer to duplicate on success, NULL on failure. * * @param pSymInfo The symbol info to duplicate. */ RTDECL(PRTDBGSYMBOL) RTDbgSymbolDup(PCRTDBGSYMBOL pSymInfo); /** * Free a symbol structure previously allocated by a RTDbg method. * * @param pSymInfo The symbol info to free. NULL is ignored. */ RTDECL(void) RTDbgSymbolFree(PRTDBGSYMBOL pSymInfo); /** Max length (including '\\0') of a debug info file name. */ #define RTDBG_FILE_NAME_LENGTH (260) /** * Debug line number information. */ typedef struct RTDBGLINE { /** Address. * This depends a bit who you ask. It will be the same as offSeg when you * as RTDbgMod, but the mapping address if you ask RTDbgAs. */ RTUINTPTR Address; /** Offset into the segment specified by iSeg. */ RTUINTPTR offSeg; /** Segment number. */ RTDBGSEGIDX iSeg; /** Line number. */ uint32_t uLineNo; /** Symbol ordinal. * This is set to UINT32_MAX if the ordinals aren't supported. */ uint32_t iOrdinal; /** Filename. */ char szFilename[RTDBG_FILE_NAME_LENGTH]; } RTDBGLINE; /** Pointer to debug line number. */ typedef RTDBGLINE *PRTDBGLINE; /** Pointer to const debug line number. */ typedef const RTDBGLINE *PCRTDBGLINE; /** * Allocate a new line number structure. * * @returns Pointer to a new structure on success, NULL on failure. */ RTDECL(PRTDBGLINE) RTDbgLineAlloc(void); /** * Duplicates a line number structure. * * @returns Pointer to duplicate on success, NULL on failure. * * @param pLine The line number to duplicate. */ RTDECL(PRTDBGLINE) RTDbgLineDup(PCRTDBGLINE pLine); /** * Free a line number structure previously allocated by a RTDbg method. * * @param pLine The line number to free. NULL is ignored. */ RTDECL(void) RTDbgLineFree(PRTDBGLINE pLine); /** @defgroup grp_rt_dbgas RTDbgAs - Debug Address Space * @{ */ /** * Creates an empty address space. * * @returns IPRT status code. * * @param phDbgAs Where to store the address space handle on success. * @param FirstAddr The first address in the address space. * @param LastAddr The last address in the address space. * @param pszName The name of the address space. */ RTDECL(int) RTDbgAsCreate(PRTDBGAS phDbgAs, RTUINTPTR FirstAddr, RTUINTPTR LastAddr, const char *pszName); /** * Variant of RTDbgAsCreate that takes a name format string. * * @returns IPRT status code. * * @param phDbgAs Where to store the address space handle on success. * @param FirstAddr The first address in the address space. * @param LastAddr The last address in the address space. * @param pszNameFmt The name format of the address space. * @param va Format arguments. */ RTDECL(int) RTDbgAsCreateV(PRTDBGAS phDbgAs, RTUINTPTR FirstAddr, RTUINTPTR LastAddr, const char *pszNameFmt, va_list va); /** * Variant of RTDbgAsCreate that takes a name format string. * * @returns IPRT status code. * * @param phDbgAs Where to store the address space handle on success. * @param FirstAddr The first address in the address space. * @param LastAddr The last address in the address space. * @param pszNameFmt The name format of the address space. * @param ... Format arguments. */ RTDECL(int) RTDbgAsCreateF(PRTDBGAS phDbgAs, RTUINTPTR FirstAddr, RTUINTPTR LastAddr, const char *pszNameFmt, ...); /** * Retains a reference to the address space. * * @returns New reference count, UINT32_MAX on invalid handle (asserted). * * @param hDbgAs The address space handle. * * @remarks Will not take any locks. */ RTDECL(uint32_t) RTDbgAsRetain(RTDBGAS hDbgAs); /** * Release a reference to the address space. * * When the reference count reaches zero, the address space is destroyed. * That means unlinking all the modules it currently contains, potentially * causing some or all of them to be destroyed as they are managed by * reference counting. * * @returns New reference count, UINT32_MAX on invalid handle (asserted). * * @param hDbgAs The address space handle. The NIL handle is quietly * ignored and 0 is returned. * * @remarks Will not take any locks. */ RTDECL(uint32_t) RTDbgAsRelease(RTDBGAS hDbgAs); /** * Gets the name of an address space. * * @returns read only address space name. * NULL if hDbgAs is invalid. * * @param hDbgAs The address space handle. * * @remarks Will not take any locks. */ RTDECL(const char *) RTDbgAsName(RTDBGAS hDbgAs); /** * Gets the first address in an address space. * * @returns The address. * 0 if hDbgAs is invalid. * * @param hDbgAs The address space handle. * * @remarks Will not take any locks. */ RTDECL(RTUINTPTR) RTDbgAsFirstAddr(RTDBGAS hDbgAs); /** * Gets the last address in an address space. * * @returns The address. * 0 if hDbgAs is invalid. * * @param hDbgAs The address space handle. * * @remarks Will not take any locks. */ RTDECL(RTUINTPTR) RTDbgAsLastAddr(RTDBGAS hDbgAs); /** * Gets the number of modules in the address space. * * This can be used together with RTDbgAsModuleByIndex * to enumerate the modules. * * @returns The number of modules. * * @param hDbgAs The address space handle. * * @remarks Will not take any locks. */ RTDECL(uint32_t) RTDbgAsModuleCount(RTDBGAS hDbgAs); /** @name Flags for RTDbgAsModuleLink and RTDbgAsModuleLinkSeg * @{ */ /** Replace all conflicting module. * (The conflicting modules will be removed the address space and their * references released.) */ #define RTDBGASLINK_FLAGS_REPLACE RT_BIT_32(0) /** Mask containing the valid flags. */ #define RTDBGASLINK_FLAGS_VALID_MASK UINT32_C(0x00000001) /** @} */ /** * Links a module into the address space at the give address. * * The size of the mapping is determined using RTDbgModImageSize(). * * @returns IPRT status code. * @retval VERR_OUT_OF_RANGE if the specified address will put the module * outside the address space. * @retval VERR_ADDRESS_CONFLICT if the mapping clashes with existing mappings. * * @param hDbgAs The address space handle. * @param hDbgMod The module handle of the module to be linked in. * @param ImageAddr The address to link the module at. * @param fFlags See RTDBGASLINK_FLAGS_*. */ RTDECL(int) RTDbgAsModuleLink(RTDBGAS hDbgAs, RTDBGMOD hDbgMod, RTUINTPTR ImageAddr, uint32_t fFlags); /** * Links a segment into the address space at the give address. * * The size of the mapping is determined using RTDbgModSegmentSize(). * * @returns IPRT status code. * @retval VERR_OUT_OF_RANGE if the specified address will put the module * outside the address space. * @retval VERR_ADDRESS_CONFLICT if the mapping clashes with existing mappings. * * @param hDbgAs The address space handle. * @param hDbgMod The module handle. * @param iSeg The segment number (0-based) of the segment to be * linked in. * @param SegAddr The address to link the segment at. * @param fFlags See RTDBGASLINK_FLAGS_*. */ RTDECL(int) RTDbgAsModuleLinkSeg(RTDBGAS hDbgAs, RTDBGMOD hDbgMod, RTDBGSEGIDX iSeg, RTUINTPTR SegAddr, uint32_t fFlags); /** * Unlinks all the mappings of a module from the address space. * * @returns IPRT status code. * @retval VERR_NOT_FOUND if the module wasn't found. * * @param hDbgAs The address space handle. * @param hDbgMod The module handle of the module to be unlinked. */ RTDECL(int) RTDbgAsModuleUnlink(RTDBGAS hDbgAs, RTDBGMOD hDbgMod); /** * Unlinks the mapping at the specified address. * * @returns IPRT status code. * @retval VERR_NOT_FOUND if no module or segment is mapped at that address. * * @param hDbgAs The address space handle. * @param Addr The address within the mapping to be unlinked. */ RTDECL(int) RTDbgAsModuleUnlinkByAddr(RTDBGAS hDbgAs, RTUINTPTR Addr); /** * Get a the handle of a module in the address space by is index. * * @returns A retained handle to the specified module. The caller must release * the returned reference. * NIL_RTDBGMOD if invalid index or handle. * * @param hDbgAs The address space handle. * @param iModule The index of the module to get. * * @remarks The module indexes may change after calls to RTDbgAsModuleLink, * RTDbgAsModuleLinkSeg, RTDbgAsModuleUnlink and * RTDbgAsModuleUnlinkByAddr. */ RTDECL(RTDBGMOD) RTDbgAsModuleByIndex(RTDBGAS hDbgAs, uint32_t iModule); /** * Queries mapping module information by handle. * * @returns IPRT status code. * @retval VERR_NOT_FOUND if no mapping was found at the specified address. * * @param hDbgAs The address space handle. * @param Addr Address within the mapping of the module or segment. * @param phMod Where to the return the retained module handle. * Optional. * @param pAddr Where to return the base address of the mapping. * Optional. * @param piSeg Where to return the segment index. This is set to * NIL if the entire module is mapped as a single * mapping. Optional. */ RTDECL(int) RTDbgAsModuleByAddr(RTDBGAS hDbgAs, RTUINTPTR Addr, PRTDBGMOD phMod, PRTUINTPTR pAddr, PRTDBGSEGIDX piSeg); /** * Queries mapping module information by name. * * @returns IPRT status code. * @retval VERR_NOT_FOUND if no mapping was found at the specified address. * @retval VERR_OUT_OF_RANGE if the name index was out of range. * * @param hDbgAs The address space handle. * @param pszName The module name. * @param iName There can be more than one module by the same name * in an address space. This argument indicates which * is ment. (0 based) * @param phMod Where to the return the retained module handle. */ RTDECL(int) RTDbgAsModuleByName(RTDBGAS hDbgAs, const char *pszName, uint32_t iName, PRTDBGMOD phMod); /** * Information about a mapping. * * This is used by RTDbgAsModuleGetMapByIndex. */ typedef struct RTDBGASMAPINFO { /** The mapping address. */ RTUINTPTR Address; /** The segment mapped there. * This is NIL_RTDBGSEGIDX if the entire module image is mapped here. */ RTDBGSEGIDX iSeg; } RTDBGASMAPINFO; /** Pointer to info about an address space mapping. */ typedef RTDBGASMAPINFO *PRTDBGASMAPINFO; /** Pointer to const info about an address space mapping. */ typedef RTDBGASMAPINFO const *PCRTDBGASMAPINFO; /** * Queries mapping information for a module given by index. * * @returns IRPT status code. * @retval VERR_INVALID_HANDLE if hDbgAs is invalid. * @retval VERR_OUT_OF_RANGE if the name index was out of range. * @retval VINF_BUFFER_OVERFLOW if the array is too small and the returned * information is incomplete. * * @param hDbgAs The address space handle. * @param iModule The index of the module to get. * @param paMappings Where to return the mapping information. The buffer * size is given by *pcMappings. * @param pcMappings IN: Size of the paMappings array. OUT: The number of * entries returned. * @param fFlags Flags for reserved for future use. MBZ. * * @remarks See remarks for RTDbgAsModuleByIndex regarding the volatility of the * iModule parameter. */ RTDECL(int) RTDbgAsModuleQueryMapByIndex(RTDBGAS hDbgAs, uint32_t iModule, PRTDBGASMAPINFO paMappings, uint32_t *pcMappings, uint32_t fFlags); /** * Adds a symbol to a module in the address space. * * @returns IPRT status code. See RTDbgModSymbolAdd for more specific ones. * @retval VERR_INVALID_HANDLE if hDbgAs is invalid. * @retval VERR_NOT_FOUND if no module was found at the specified address. * @retval VERR_NOT_SUPPORTED if the module interpret doesn't support adding * custom symbols. * * @param hDbgAs The address space handle. * @param pszSymbol The symbol name. * @param Addr The address of the symbol. * @param cb The size of the symbol. * @param fFlags Symbol flags. * @param piOrdinal Where to return the symbol ordinal on success. If * the interpreter doesn't do ordinals, this will be set to * UINT32_MAX. Optional */ RTDECL(int) RTDbgAsSymbolAdd(RTDBGAS hDbgAs, const char *pszSymbol, RTUINTPTR Addr, RTUINTPTR cb, uint32_t fFlags, uint32_t *piOrdinal); /** * Query a symbol by address. * * @returns IPRT status code. See RTDbgModSymbolAddr for more specific ones. * @retval VERR_INVALID_HANDLE if hDbgAs is invalid. * @retval VERR_NOT_FOUND if the address couldn't be mapped to a module. * * @param hDbgAs The address space handle. * @param Addr The address which closest symbol is requested. * @param poffDisp Where to return the distance between the symbol * and address. Optional. * @param pSymbol Where to return the symbol info. * @param phMod Where to return the module handle. Optional. */ RTDECL(int) RTDbgAsSymbolByAddr(RTDBGAS hDbgAs, RTUINTPTR Addr, PRTINTPTR poffDisp, PRTDBGSYMBOL pSymbol, PRTDBGMOD phMod); /** * Query a symbol by address. * * @returns IPRT status code. See RTDbgModSymbolAddrA for more specific ones. * @retval VERR_INVALID_HANDLE if hDbgAs is invalid. * @retval VERR_NOT_FOUND if the address couldn't be mapped to a module. * * @param hDbgAs The address space handle. * @param Addr The address which closest symbol is requested. * @param poffDisp Where to return the distance between the symbol * and address. Optional. * @param ppSymInfo Where to return the pointer to the allocated symbol * info. Always set. Free with RTDbgSymbolFree. * @param phMod Where to return the module handle. Optional. */ RTDECL(int) RTDbgAsSymbolByAddrA(RTDBGAS hDbgAs, RTUINTPTR Addr, PRTINTPTR poffDisp, PRTDBGSYMBOL *ppSymInfo, PRTDBGMOD phMod); /** * Query a symbol by name. * * @returns IPRT status code. * @retval VERR_SYMBOL_NOT_FOUND if not found. * * @param hDbgAs The address space handle. * @param pszSymbol The symbol name. It is possible to limit the scope * of the search by prefixing the symbol with a module * name pattern followed by a bang (!) character. * RTStrSimplePatternNMatch is used for the matching. * @param pSymbol Where to return the symbol info. * @param phMod Where to return the module handle. Optional. */ RTDECL(int) RTDbgAsSymbolByName(RTDBGAS hDbgAs, const char *pszSymbol, PRTDBGSYMBOL pSymbol, PRTDBGMOD phMod); /** * Query a symbol by name, allocating the returned symbol structure. * * @returns IPRT status code. * @retval VERR_SYMBOL_NOT_FOUND if not found. * * @param hDbgAs The address space handle. * @param pszSymbol The symbol name. See RTDbgAsSymbolByName for more. * @param ppSymbol Where to return the pointer to the allocated * symbol info. Always set. Free with RTDbgSymbolFree. * @param phMod Where to return the module handle. Optional. */ RTDECL(int) RTDbgAsSymbolByNameA(RTDBGAS hDbgAs, const char *pszSymbol, PRTDBGSYMBOL *ppSymbol, PRTDBGMOD phMod); /** * Query a line number by address. * * @returns IPRT status code. See RTDbgModSymbolAddrA for more specific ones. * @retval VERR_INVALID_HANDLE if hDbgAs is invalid. * @retval VERR_NOT_FOUND if the address couldn't be mapped to a module. * * @param hDbgAs The address space handle. * @param Addr The address which closest symbol is requested. * @param poffDisp Where to return the distance between the line * number and address. * @param pLine Where to return the line number information. */ RTDECL(int) RTDbgAs(RTDBGAS hDbgAs, RTUINTPTR Addr, PRTINTPTR poffDisp, PRTDBGLINE pLine); /** * Adds a line number to a module in the address space. * * @returns IPRT status code. See RTDbgModSymbolAdd for more specific ones. * @retval VERR_INVALID_HANDLE if hDbgAs is invalid. * @retval VERR_NOT_FOUND if no module was found at the specified address. * @retval VERR_NOT_SUPPORTED if the module interpret doesn't support adding * custom symbols. * * @param hDbgAs The address space handle. * @param pszFile The file name. * @param uLineNo The line number. * @param Addr The address of the symbol. * @param piOrdinal Where to return the line number ordinal on success. * If the interpreter doesn't do ordinals, this will be * set to UINT32_MAX. Optional. */ RTDECL(int) RTDbgAsLineAdd(RTDBGAS hDbgAs, const char *pszFile, uint32_t uLineNo, RTUINTPTR Addr, uint32_t *piOrdinal); /** * Query a line number by address. * * @returns IPRT status code. See RTDbgModSymbolAddrA for more specific ones. * @retval VERR_INVALID_HANDLE if hDbgAs is invalid. * @retval VERR_NOT_FOUND if the address couldn't be mapped to a module. * * @param hDbgAs The address space handle. * @param Addr The address which closest symbol is requested. * @param poffDisp Where to return the distance between the line * number and address. * @param ppLine Where to return the pointer to the allocated line * number info. Always set. Free with RTDbgLineFree. */ RTDECL(int) RTDbgAsLineByAddrA(RTDBGAS hDbgAs, RTUINTPTR Addr, PRTINTPTR poffDisp, PRTDBGLINE *ppLine); /** @todo Missing some bits here. */ /** @} */ /** @defgroup grp_rt_dbgmod RTDbgMod - Debug Module Interpreter * @{ */ /** * Creates a module based on the default debug info container. * * This can be used to manually load a module and its symbol. The primary user * group is the debug info interpreters, which use this API to create an * efficient debug info container behind the scenes and forward all queries to * it once the info has been loaded. * * @returns IPRT status code. * * @param phDbgMod Where to return the module handle. * @param pszName The name of the module (mandatory). * @param cbSeg The size of initial segment. If zero, segments will * have to be added manually using RTDbgModSegmentAdd. * @param fFlags Flags reserved for future extensions, MBZ for now. */ RTDECL(int) RTDbgModCreate(PRTDBGMOD phDbgMod, const char *pszName, RTUINTPTR cbSeg, uint32_t fFlags); RTDECL(int) RTDbgModCreateDeferred(PRTDBGMOD phDbgMod, const char *pszFilename, const char *pszName, RTUINTPTR cb, uint32_t fFlags); RTDECL(int) RTDbgModCreateFromImage(PRTDBGMOD phDbgMod, const char *pszFilename, const char *pszName, uint32_t fFlags); RTDECL(int) RTDbgModCreateFromMap(PRTDBGMOD phDbgMod, const char *pszFilename, const char *pszName, RTUINTPTR uSubtrahend, uint32_t fFlags); /** * Retains another reference to the module. * * @returns New reference count, UINT32_MAX on invalid handle (asserted). * * @param hDbgMod The module handle. * * @remarks Will not take any locks. */ RTDECL(uint32_t) RTDbgModRetain(RTDBGMOD hDbgMod); /** * Release a reference to the module. * * When the reference count reaches zero, the module is destroyed. * * @returns New reference count, UINT32_MAX on invalid handle (asserted). * * @param hDbgMod The module handle. The NIL handle is quietly ignored * and 0 is returned. * * @remarks Will not take any locks. */ RTDECL(uint32_t) RTDbgModRelease(RTDBGMOD hDbgMod); /** * Gets the module name. * * @returns Pointer to a read only string containing the name. * * @param hDbgMod The module handle. */ RTDECL(const char *) RTDbgModName(RTDBGMOD hDbgMod); /** * Converts an image relative address to a segment:offset address. * * @returns Segment index on success. * NIL_RTDBGSEGIDX is returned if the module handle or the RVA are * invalid. * * @param hDbgMod The module handle. * @param uRva The image relative address to convert. * @param poffSeg Where to return the segment offset. Optional. */ RTDECL(RTDBGSEGIDX) RTDbgModRvaToSegOff(RTDBGMOD hDbgMod, RTUINTPTR uRva, PRTUINTPTR poffSeg); /** * Image size when mapped if segments are mapped adjecently. * * For ELF, PE, and Mach-O images this is (usually) a natural query, for LX and * NE and such it's a bit odder and the answer may not make much sense for them. * * @returns Image mapped size. * RTUINTPTR_MAX is returned if the handle is invalid. * * @param hDbgMod The module handle. */ RTDECL(RTUINTPTR) RTDbgModImageSize(RTDBGMOD hDbgMod); /** * Gets the module tag value if any. * * @returns The tag. 0 if hDbgMod is invalid. * * @param hDbgMod The module handle. */ RTDECL(uint64_t) RTDbgModGetTag(RTDBGMOD hDbgMod); /** * Tags or untags the module. * * @returns IPRT status code. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * * @param hDbgMod The module handle. * @param uTag The tag value. The convention is that 0 is no tag * and any other value means it's tagged. It's adviced * to use some kind of unique number like an address * (global or string cache for instance) to avoid * collisions with other users */ RTDECL(int) RTDbgModSetTag(RTDBGMOD hDbgMod, uint64_t uTag); /** * Adds a segment to the module. Optional feature. * * This method is intended used for manually constructing debug info for a * module. The main usage is from other debug info interpreters that want to * avoid writing a debug info database and instead uses the standard container * behind the scenes. * * @returns IPRT status code. * @retval VERR_NOT_SUPPORTED if this feature isn't support by the debug info * interpreter. This is a common return code. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @retval VERR_DBG_ADDRESS_WRAP if uRva+cb wraps around. * @retval VERR_DBG_SEGMENT_NAME_OUT_OF_RANGE if pszName is too short or long. * @retval VERR_INVALID_PARAMETER if fFlags contains undefined flags. * @retval VERR_DBG_SPECIAL_SEGMENT if *piSeg is a special segment. * @retval VERR_DBG_INVALID_SEGMENT_INDEX if *piSeg doesn't meet expectations. * * @param hDbgMod The module handle. * @param uRva The image relative address of the segment. * @param cb The size of the segment. * @param pszName The segment name. Does not normally need to be * unique, although this is somewhat up to the * debug interpreter to decide. * @param fFlags Segment flags. Reserved for future used, MBZ. * @param piSeg The segment index or NIL_RTDBGSEGIDX on input. * The assigned segment index on successful return. * Optional. */ RTDECL(int) RTDbgModSegmentAdd(RTDBGMOD hDbgMod, RTUINTPTR uRva, RTUINTPTR cb, const char *pszName, uint32_t fFlags, PRTDBGSEGIDX piSeg); /** * Gets the number of segments in the module. * * This is can be used to determin the range which can be passed to * RTDbgModSegmentByIndex and derivates. * * @returns The segment relative address. * NIL_RTDBGSEGIDX if the handle is invalid. * * @param hDbgMod The module handle. */ RTDECL(RTDBGSEGIDX) RTDbgModSegmentCount(RTDBGMOD hDbgMod); /** * Query information about a segment. * * This can be used together with RTDbgModSegmentCount to enumerate segments. * The index starts a 0 and stops one below RTDbgModSegmentCount. * * @returns IPRT status code. * @retval VERR_DBG_INVALID_SEGMENT_INDEX if iSeg is too high. * @retval VERR_DBG_SPECIAL_SEGMENT if iSeg indicates a special segment. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * * @param hDbgMod The module handle. * @param iSeg The segment index. No special segments. * @param pSegInfo Where to return the segment info. The * RTDBGSEGMENT::Address member will be set to * RTUINTPTR_MAX or the load address used at link time. */ RTDECL(int) RTDbgModSegmentByIndex(RTDBGMOD hDbgMod, RTDBGSEGIDX iSeg, PRTDBGSEGMENT pSegInfo); /** * Gets the size of a segment. * * This is a just a wrapper around RTDbgModSegmentByIndex. * * @returns The segment size. * RTUINTPTR_MAX is returned if either the handle and segment index are * invalid. * * @param hDbgMod The module handle. * @param iSeg The segment index. RTDBGSEGIDX_ABS is not allowed. * If RTDBGSEGIDX_RVA is used, the functions returns * the same value as RTDbgModImageSize. */ RTDECL(RTUINTPTR) RTDbgModSegmentSize(RTDBGMOD hDbgMod, RTDBGSEGIDX iSeg); /** * Gets the image relative address of a segment. * * This is a just a wrapper around RTDbgModSegmentByIndex. * * @returns The segment relative address. * RTUINTPTR_MAX is returned if either the handle and segment index are * invalid. * * @param hDbgMod The module handle. * @param iSeg The segment index. No special segment indexes * allowed (asserted). */ RTDECL(RTUINTPTR) RTDbgModSegmentRva(RTDBGMOD hDbgMod, RTDBGSEGIDX iSeg); /** * Adds a line number to the module. * * @returns IPRT status code. * @retval VERR_NOT_SUPPORTED if the module interpret doesn't support adding * custom symbols. This is a common place occurance. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @retval VERR_DBG_SYMBOL_NAME_OUT_OF_RANGE if the symbol name is too long or * short. * @retval VERR_DBG_INVALID_RVA if an image relative address is specified and * it's not inside any of the segments defined by the module. * @retval VERR_DBG_INVALID_SEGMENT_INDEX if the segment index isn't valid. * @retval VERR_DBG_INVALID_SEGMENT_OFFSET if the segment offset is beyond the * end of the segment. * @retval VERR_DBG_ADDRESS_WRAP if off+cb wraps around. * @retval VERR_INVALID_PARAMETER if the symbol flags sets undefined bits. * * @param hDbgMod The module handle. * @param pszSymbol The symbol name. * @param iSeg The segment index. * @param off The segment offset. * @param cb The size of the symbol. Can be zero, although this * may depend somewhat on the debug interpreter. * @param fFlags Symbol flags. Reserved for the future, MBZ. * @param piOrdinal Where to return the symbol ordinal on success. If * the interpreter doesn't do ordinals, this will be set to * UINT32_MAX. Optional. */ RTDECL(int) RTDbgModSymbolAdd(RTDBGMOD hDbgMod, const char *pszSymbol, RTDBGSEGIDX iSeg, RTUINTPTR off, RTUINTPTR cb, uint32_t fFlags, uint32_t *piOrdinal); /** * Gets the symbol count. * * This can be used together wtih RTDbgModSymbolByOrdinal or * RTDbgModSymbolByOrdinalA to enumerate all the symbols. * * @returns The number of symbols in the module. * UINT32_MAX is returned if the module handle is invalid or some other * error occurs. * * @param hDbgMod The module handle. */ RTDECL(uint32_t) RTDbgModSymbolCount(RTDBGMOD hDbgMod); /** * Queries symbol information by ordinal number. * * @returns IPRT status code. * @retval VERR_SYMBOL_NOT_FOUND if there is no symbol at the given number. * @retval VERR_DBG_NO_SYMBOLS if there aren't any symbols. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @retval VERR_NOT_SUPPORTED if lookup by ordinal is not supported. * * @param hDbgMod The module handle. * @param iOrdinal The symbol ordinal number. 0-based. The highest * number is RTDbgModSymbolCount() - 1. * @param pSymInfo Where to store the symbol information. */ RTDECL(int) RTDbgModSymbolByOrdinal(RTDBGMOD hDbgMod, uint32_t iOrdinal, PRTDBGSYMBOL pSymInfo); /** * Queries symbol information by ordinal number. * * @returns IPRT status code. * @retval VERR_DBG_NO_SYMBOLS if there aren't any symbols. * @retval VERR_NOT_SUPPORTED if lookup by ordinal is not supported. * @retval VERR_SYMBOL_NOT_FOUND if there is no symbol at the given number. * @retval VERR_NO_MEMORY if RTDbgSymbolAlloc fails. * * @param hDbgMod The module handle. * @param iOrdinal The symbol ordinal number. 0-based. The highest * number is RTDbgModSymbolCount() - 1. * @param ppSymInfo Where to store the pointer to the returned * symbol information. Always set. Free with * RTDbgSymbolFree. */ RTDECL(int) RTDbgModSymbolByOrdinalA(RTDBGMOD hDbgMod, uint32_t iOrdinal, PRTDBGSYMBOL *ppSymInfo); /** * Queries symbol information by address. * * The returned symbol is what the debug info interpreter consideres the symbol * most applicable to the specified address. This usually means a symbol with an * address equal or lower than the requested. * * @returns IPRT status code. * @retval VERR_SYMBOL_NOT_FOUND if no suitable symbol was found. * @retval VERR_DBG_NO_SYMBOLS if there aren't any symbols. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @retval VERR_DBG_INVALID_RVA if an image relative address is specified and * it's not inside any of the segments defined by the module. * @retval VERR_DBG_INVALID_SEGMENT_INDEX if the segment index isn't valid. * @retval VERR_DBG_INVALID_SEGMENT_OFFSET if the segment offset is beyond the * end of the segment. * * @param hDbgMod The module handle. * @param iSeg The segment number. * @param off The offset into the segment. * @param poffDisp Where to store the distance between the * specified address and the returned symbol. * Optional. * @param pSymInfo Where to store the symbol information. */ RTDECL(int) RTDbgModSymbolByAddr(RTDBGMOD hDbgMod, RTDBGSEGIDX iSeg, RTUINTPTR off, PRTINTPTR poffDisp, PRTDBGSYMBOL pSymInfo); /** * Queries symbol information by address. * * The returned symbol is what the debug info interpreter consideres the symbol * most applicable to the specified address. This usually means a symbol with an * address equal or lower than the requested. * * @returns IPRT status code. * @retval VERR_SYMBOL_NOT_FOUND if no suitable symbol was found. * @retval VERR_DBG_NO_SYMBOLS if there aren't any symbols. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @retval VERR_DBG_INVALID_RVA if an image relative address is specified and * it's not inside any of the segments defined by the module. * @retval VERR_DBG_INVALID_SEGMENT_INDEX if the segment index isn't valid. * @retval VERR_DBG_INVALID_SEGMENT_OFFSET if the segment offset is beyond the * end of the segment. * @retval VERR_NO_MEMORY if RTDbgSymbolAlloc fails. * * @param hDbgMod The module handle. * @param iSeg The segment index. * @param off The offset into the segment. * @param poffDisp Where to store the distance between the * specified address and the returned symbol. Optional. * @param ppSymInfo Where to store the pointer to the returned * symbol information. Always set. Free with * RTDbgSymbolFree. */ RTDECL(int) RTDbgModSymbolByAddrA(RTDBGMOD hDbgMod, RTDBGSEGIDX iSeg, RTUINTPTR off, PRTINTPTR poffDisp, PRTDBGSYMBOL *ppSymInfo); /** * Queries symbol information by symbol name. * * @returns IPRT status code. * @retval VERR_DBG_NO_SYMBOLS if there aren't any symbols. * @retval VERR_SYMBOL_NOT_FOUND if no suitable symbol was found. * @retval VERR_DBG_SYMBOL_NAME_OUT_OF_RANGE if the symbol name is too long or * short. * * @param hDbgMod The module handle. * @param pszSymbol The symbol name. * @param pSymInfo Where to store the symbol information. */ RTDECL(int) RTDbgModSymbolByName(RTDBGMOD hDbgMod, const char *pszSymbol, PRTDBGSYMBOL pSymInfo); /** * Queries symbol information by symbol name. * * @returns IPRT status code. * @retval VERR_DBG_NO_SYMBOLS if there aren't any symbols. * @retval VERR_SYMBOL_NOT_FOUND if no suitable symbol was found. * @retval VERR_DBG_SYMBOL_NAME_OUT_OF_RANGE if the symbol name is too long or * short. * @retval VERR_NO_MEMORY if RTDbgSymbolAlloc fails. * * @param hDbgMod The module handle. * @param pszSymbol The symbol name. * @param ppSymInfo Where to store the pointer to the returned * symbol information. Always set. Free with * RTDbgSymbolFree. */ RTDECL(int) RTDbgModSymbolByNameA(RTDBGMOD hDbgMod, const char *pszSymbol, PRTDBGSYMBOL *ppSymInfo); /** * Adds a line number to the module. * * @returns IPRT status code. * @retval VERR_NOT_SUPPORTED if the module interpret doesn't support adding * custom symbols. This should be consider a normal response. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @retval VERR_DBG_FILE_NAME_OUT_OF_RANGE if the file name is too longer or * empty. * @retval VERR_DBG_INVALID_RVA if an image relative address is specified and * it's not inside any of the segments defined by the module. * @retval VERR_DBG_INVALID_SEGMENT_INDEX if the segment index isn't valid. * @retval VERR_DBG_INVALID_SEGMENT_OFFSET if the segment offset is beyond the * end of the segment. * @retval VERR_INVALID_PARAMETER if the line number flags sets undefined bits. * * @param hDbgMod The module handle. * @param pszFile The file name. * @param uLineNo The line number. * @param iSeg The segment index. * @param off The segment offset. * @param piOrdinal Where to return the line number ordinal on * success. If the interpreter doesn't do ordinals, * this will be set to UINT32_MAX. Optional. */ RTDECL(int) RTDbgModLineAdd(RTDBGMOD hDbgMod, const char *pszFile, uint32_t uLineNo, RTDBGSEGIDX iSeg, RTUINTPTR off, uint32_t *piOrdinal); /** * Gets the line number count. * * This can be used together wtih RTDbgModLineByOrdinal or RTDbgModSymbolByLineA * to enumerate all the line number information. * * @returns The number of line numbers in the module. * UINT32_MAX is returned if the module handle is invalid or some other * error occurs. * * @param hDbgMod The module handle. */ RTDECL(uint32_t) RTDbgModLineCount(RTDBGMOD hDbgMod); /** * Queries line number information by ordinal number. * * This can be used to enumerate the line numbers for the module. Use * RTDbgModLineCount() to figure the end of the ordinals. * * @returns IPRT status code. * @retval VERR_DBG_NO_LINE_NUMBERS if there aren't any line numbers. * @retval VERR_DBG_LINE_NOT_FOUND if there is no line number with that * ordinal. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @param hDbgMod The module handle. * @param iOrdinal The line number ordinal number. * @param pLineInfo Where to store the information about the line * number. */ RTDECL(int) RTDbgModLineByOrdinal(RTDBGMOD hDbgMod, uint32_t iOrdinal, PRTDBGLINE pLineInfo); /** * Queries line number information by ordinal number. * * This can be used to enumerate the line numbers for the module. Use * RTDbgModLineCount() to figure the end of the ordinals. * * @returns IPRT status code. * @retval VERR_DBG_NO_LINE_NUMBERS if there aren't any line numbers. * @retval VERR_DBG_LINE_NOT_FOUND if there is no line number with that * ordinal. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @retval VERR_NO_MEMORY if RTDbgLineAlloc fails. * * @param hDbgMod The module handle. * @param iOrdinal The line number ordinal number. * @param ppLineInfo Where to store the pointer to the returned line * number information. Always set. Free with * RTDbgLineFree. */ RTDECL(int) RTDbgModLineByOrdinalA(RTDBGMOD hDbgMod, uint32_t iOrdinal, PRTDBGLINE *ppLineInfo); /** * Queries line number information by address. * * The returned line number is what the debug info interpreter consideres the * one most applicable to the specified address. This usually means a line * number with an address equal or lower than the requested. * * @returns IPRT status code. * @retval VERR_DBG_NO_LINE_NUMBERS if there aren't any line numbers. * @retval VERR_DBG_LINE_NOT_FOUND if no suitable line number was found. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @retval VERR_DBG_INVALID_RVA if an image relative address is specified and * it's not inside any of the segments defined by the module. * @retval VERR_DBG_INVALID_SEGMENT_INDEX if the segment index isn't valid. * @retval VERR_DBG_INVALID_SEGMENT_OFFSET if the segment offset is beyond the * end of the segment. * * @param hDbgMod The module handle. * @param iSeg The segment number. * @param off The offset into the segment. * @param poffDisp Where to store the distance between the * specified address and the returned symbol. * Optional. * @param pLineInfo Where to store the line number information. */ RTDECL(int) RTDbgModLineByAddr(RTDBGMOD hDbgMod, RTDBGSEGIDX iSeg, RTUINTPTR off, PRTINTPTR poffDisp, PRTDBGLINE pLineInfo); /** * Queries line number information by address. * * The returned line number is what the debug info interpreter consideres the * one most applicable to the specified address. This usually means a line * number with an address equal or lower than the requested. * * @returns IPRT status code. * @retval VERR_DBG_NO_LINE_NUMBERS if there aren't any line numbers. * @retval VERR_DBG_LINE_NOT_FOUND if no suitable line number was found. * @retval VERR_INVALID_HANDLE if hDbgMod is invalid. * @retval VERR_DBG_INVALID_RVA if an image relative address is specified and * it's not inside any of the segments defined by the module. * @retval VERR_DBG_INVALID_SEGMENT_INDEX if the segment index isn't valid. * @retval VERR_DBG_INVALID_SEGMENT_OFFSET if the segment offset is beyond the * end of the segment. * @retval VERR_NO_MEMORY if RTDbgLineAlloc fails. * * @param hDbgMod The module handle. * @param iSeg The segment number. * @param off The offset into the segment. * @param poffDisp Where to store the distance between the * specified address and the returned symbol. * Optional. * @param ppLineInfo Where to store the pointer to the returned line * number information. Always set. Free with * RTDbgLineFree. */ RTDECL(int) RTDbgModLineByAddrA(RTDBGMOD hDbgMod, RTDBGSEGIDX iSeg, RTUINTPTR off, PRTINTPTR poffDisp, PRTDBGLINE *ppLineInfo); /** @} */ /** @} */ RT_C_DECLS_END #endif