/** @file * IPRT - Status Codes. */ /* * Copyright (C) 2006-2010 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_err_h #define ___iprt_err_h #include #include #include /** @defgroup grp_rt_err RTErr - Status Codes * @ingroup grp_rt * * The IPRT status codes are in two ranges: {0..999} and {22000..32766}. The * IPRT users are free to use the range {1000..21999}. See RTERR_RANGE1_FIRST, * RTERR_RANGE1_LAST, RTERR_RANGE2_FIRST, RTERR_RANGE2_LAST, RTERR_USER_FIRST * and RTERR_USER_LAST. * * @{ */ /** @defgroup grp_rt_err_hlp Status Code Helpers * @ingroup grp_rt_err * @{ */ #ifdef __cplusplus /** * Strict type validation class. * * This is only really useful for type checking the arguments to RT_SUCCESS, * RT_SUCCESS_NP, RT_FAILURE and RT_FAILURE_NP. The RTErrStrictType2 * constructor is for integration with external status code strictness regimes. */ class RTErrStrictType { protected: int32_t m_rc; public: /** * Constructor for interaction with external status code strictness regimes. * * This is a special constructor for helping external return code validator * classes interact cleanly with RT_SUCCESS, RT_SUCCESS_NP, RT_FAILURE and * RT_FAILURE_NP while barring automatic cast to integer. * * @param rcObj IPRT status code object from an automatic cast. */ RTErrStrictType(RTErrStrictType2 const rcObj) : m_rc(rcObj.getValue()) { } /** * Integer constructor used by RT_SUCCESS_NP. * * @param rc IPRT style status code. */ RTErrStrictType(int32_t rc) : m_rc(rc) { } #if 0 /** @todo figure where int32_t is long instead of int. */ /** * Integer constructor used by RT_SUCCESS_NP. * * @param rc IPRT style status code. */ RTErrStrictType(signed int rc) : m_rc(rc) { } #endif /** * Test for success. */ bool success() const { return m_rc >= 0; } private: /** @name Try ban a number of wrong types. * @{ */ RTErrStrictType(uint8_t rc) : m_rc(-999) { NOREF(rc); } RTErrStrictType(uint16_t rc) : m_rc(-999) { NOREF(rc); } RTErrStrictType(uint32_t rc) : m_rc(-999) { NOREF(rc); } RTErrStrictType(uint64_t rc) : m_rc(-999) { NOREF(rc); } RTErrStrictType(int8_t rc) : m_rc(-999) { NOREF(rc); } RTErrStrictType(int16_t rc) : m_rc(-999) { NOREF(rc); } RTErrStrictType(int64_t rc) : m_rc(-999) { NOREF(rc); } /** @todo fight long here - clashes with int32_t/int64_t on some platforms. */ /** @} */ }; #endif /* __cplusplus */ /** @def RTERR_STRICT_RC * Indicates that RT_SUCCESS_NP, RT_SUCCESS, RT_FAILURE_NP and RT_FAILURE should * make type enforcing at compile time. * * @remarks Only define this for C++ code. */ #if defined(__cplusplus) \ && !defined(RTERR_STRICT_RC) \ && ( defined(DOXYGEN_RUNNING) \ || defined(DEBUG) \ || defined(RT_STRICT) ) # define RTERR_STRICT_RC 1 #endif /** @def RT_SUCCESS * Check for success. We expect success in normal cases, that is the code path depending on * this check is normally taken. To prevent any prediction use RT_SUCCESS_NP instead. * * @returns true if rc indicates success. * @returns false if rc indicates failure. * * @param rc The iprt status code to test. */ #define RT_SUCCESS(rc) ( RT_LIKELY(RT_SUCCESS_NP(rc)) ) /** @def RT_SUCCESS_NP * Check for success. Don't predict the result. * * @returns true if rc indicates success. * @returns false if rc indicates failure. * * @param rc The iprt status code to test. */ #ifdef RTERR_STRICT_RC # define RT_SUCCESS_NP(rc) ( RTErrStrictType(rc).success() ) #else # define RT_SUCCESS_NP(rc) ( (int)(rc) >= VINF_SUCCESS ) #endif /** @def RT_FAILURE * Check for failure. We don't expect in normal cases, that is the code path depending on * this check is normally NOT taken. To prevent any prediction use RT_FAILURE_NP instead. * * @returns true if rc indicates failure. * @returns false if rc indicates success. * * @param rc The iprt status code to test. */ #define RT_FAILURE(rc) ( RT_UNLIKELY(!RT_SUCCESS_NP(rc)) ) /** @def RT_FAILURE_NP * Check for failure. Don't predict the result. * * @returns true if rc indicates failure. * @returns false if rc indicates success. * * @param rc The iprt status code to test. */ #define RT_FAILURE_NP(rc) ( !RT_SUCCESS_NP(rc) ) RT_C_DECLS_BEGIN /** * Converts a Darwin HRESULT error to an iprt status code. * * @returns iprt status code. * @param iNativeCode HRESULT error code. * @remark Darwin ring-3 only. */ RTDECL(int) RTErrConvertFromDarwinCOM(int32_t iNativeCode); /** * Converts a Darwin IOReturn error to an iprt status code. * * @returns iprt status code. * @param iNativeCode IOReturn error code. * @remark Darwin only. */ RTDECL(int) RTErrConvertFromDarwinIO(int iNativeCode); /** * Converts a Darwin kern_return_t error to an iprt status code. * * @returns iprt status code. * @param iNativeCode kern_return_t error code. * @remark Darwin only. */ RTDECL(int) RTErrConvertFromDarwinKern(int iNativeCode); /** * Converts a Darwin error to an iprt status code. * * This will consult RTErrConvertFromDarwinKern, RTErrConvertFromDarwinIO * and RTErrConvertFromDarwinCOM in this order. The latter is ring-3 only as it * doesn't apply elsewhere. * * @returns iprt status code. * @param iNativeCode Darwin error code. * @remarks Darwin only. * @remarks This is recommended over RTErrConvertFromDarwinKern and RTErrConvertFromDarwinIO * since these are really just subsets of the same error space. */ RTDECL(int) RTErrConvertFromDarwin(int iNativeCode); /** * Converts errno to iprt status code. * * @returns iprt status code. * @param uNativeCode errno code. */ RTDECL(int) RTErrConvertFromErrno(unsigned uNativeCode); /** * Converts a L4 errno to a iprt status code. * * @returns iprt status code. * @param uNativeCode l4 errno. * @remark L4 only. */ RTDECL(int) RTErrConvertFromL4Errno(unsigned uNativeCode); /** * Converts NT status code to iprt status code. * * Needless to say, this is only available on NT and winXX targets. * * @returns iprt status code. * @param lNativeCode NT status code. * @remark Windows only. */ RTDECL(int) RTErrConvertFromNtStatus(long lNativeCode); /** * Converts OS/2 error code to iprt status code. * * @returns iprt status code. * @param uNativeCode OS/2 error code. * @remark OS/2 only. */ RTDECL(int) RTErrConvertFromOS2(unsigned uNativeCode); /** * Converts Win32 error code to iprt status code. * * @returns iprt status code. * @param uNativeCode Win32 error code. * @remark Windows only. */ RTDECL(int) RTErrConvertFromWin32(unsigned uNativeCode); /** * Converts an iprt status code to a errno status code. * * @returns errno status code. * @param iErr iprt status code. */ RTDECL(int) RTErrConvertToErrno(int iErr); #ifdef IN_RING3 /** * iprt status code message. */ typedef struct RTSTATUSMSG { /** Pointer to the short message string. */ const char *pszMsgShort; /** Pointer to the full message string. */ const char *pszMsgFull; /** Pointer to the define string. */ const char *pszDefine; /** Status code number. */ int iCode; } RTSTATUSMSG; /** Pointer to iprt status code message. */ typedef RTSTATUSMSG *PRTSTATUSMSG; /** Pointer to const iprt status code message. */ typedef const RTSTATUSMSG *PCRTSTATUSMSG; /** * Get the message structure corresponding to a given iprt status code. * * @returns Pointer to read-only message description. * @param rc The status code. */ RTDECL(PCRTSTATUSMSG) RTErrGet(int rc); /** * Get the define corresponding to a given iprt status code. * * @returns Pointer to read-only string with the \#define identifier. * @param rc The status code. */ #define RTErrGetDefine(rc) (RTErrGet(rc)->pszDefine) /** * Get the short description corresponding to a given iprt status code. * * @returns Pointer to read-only string with the description. * @param rc The status code. */ #define RTErrGetShort(rc) (RTErrGet(rc)->pszMsgShort) /** * Get the full description corresponding to a given iprt status code. * * @returns Pointer to read-only string with the description. * @param rc The status code. */ #define RTErrGetFull(rc) (RTErrGet(rc)->pszMsgFull) #ifdef RT_OS_WINDOWS /** * Windows error code message. */ typedef struct RTWINERRMSG { /** Pointer to the full message string. */ const char *pszMsgFull; /** Pointer to the define string. */ const char *pszDefine; /** Error code number. */ long iCode; } RTWINERRMSG; /** Pointer to Windows error code message. */ typedef RTWINERRMSG *PRTWINERRMSG; /** Pointer to const Windows error code message. */ typedef const RTWINERRMSG *PCRTWINERRMSG; /** * Get the message structure corresponding to a given Windows error code. * * @returns Pointer to read-only message description. * @param rc The status code. */ RTDECL(PCRTWINERRMSG) RTErrWinGet(long rc); /** On windows COM errors are part of the Windows error database. */ typedef RTWINERRMSG RTCOMERRMSG; #else /* !RT_OS_WINDOWS */ /** * COM/XPCOM error code message. */ typedef struct RTCOMERRMSG { /** Pointer to the full message string. */ const char *pszMsgFull; /** Pointer to the define string. */ const char *pszDefine; /** Error code number. */ uint32_t iCode; } RTCOMERRMSG; #endif /* !RT_OS_WINDOWS */ /** Pointer to a XPCOM/COM error code message. */ typedef RTCOMERRMSG *PRTCOMERRMSG; /** Pointer to const a XPCOM/COM error code message. */ typedef const RTCOMERRMSG *PCRTCOMERRMSG; /** * Get the message structure corresponding to a given COM/XPCOM error code. * * @returns Pointer to read-only message description. * @param rc The status code. */ RTDECL(PCRTCOMERRMSG) RTErrCOMGet(uint32_t rc); #endif /* IN_RING3 */ /** @defgroup RTERRINFO_FLAGS_XXX RTERRINFO::fFlags * @{ */ /** Custom structure (the default). */ #define RTERRINFO_FLAGS_T_CUSTOM UINT32_C(0) /** Static structure (RTERRINFOSTATIC). */ #define RTERRINFO_FLAGS_T_STATIC UINT32_C(1) /** Allocated structure (RTErrInfoAlloc). */ #define RTERRINFO_FLAGS_T_ALLOC UINT32_C(2) /** Reserved type. */ #define RTERRINFO_FLAGS_T_RESERVED UINT32_C(3) /** Type mask. */ #define RTERRINFO_FLAGS_T_MASK UINT32_C(3) /** Error info is set. */ #define RTERRINFO_FLAGS_SET RT_BIT_32(2) /** Fixed flags (magic). */ #define RTERRINFO_FLAGS_MAGIC UINT32_C(0xbabe0000) /** The bit mask for the magic value. */ #define RTERRINFO_FLAGS_MAGIC_MASK UINT32_C(0xffff0000) /** @} */ /** * Initializes an error info structure. * * @returns @a pErrInfo. * @param pErrInfo The error info structure to init. * @param pszMsg The message buffer. Must be at least one byte. * @param cbMsg The size of the message buffer. */ DECLINLINE(PRTERRINFO) RTErrInfoInit(PRTERRINFO pErrInfo, char *pszMsg, size_t cbMsg) { *pszMsg = '\0'; pErrInfo->fFlags = RTERRINFO_FLAGS_T_CUSTOM | RTERRINFO_FLAGS_MAGIC; pErrInfo->rc = /*VINF_SUCCESS*/ 0; pErrInfo->pszMsg = pszMsg; pErrInfo->cbMsg = cbMsg; pErrInfo->apvReserved[0] = NULL; pErrInfo->apvReserved[1] = NULL; return pErrInfo; } /** * Initialize a static error info structure. * * @param pStaticErrInfo The static error info structure to init. */ DECLINLINE(void) RTErrInfoInitStatic(PRTERRINFOSTATIC pStaticErrInfo) { RTErrInfoInit(&pStaticErrInfo->Core, pStaticErrInfo->szMsg, sizeof(pStaticErrInfo->szMsg)); pStaticErrInfo->Core.fFlags = RTERRINFO_FLAGS_T_STATIC | RTERRINFO_FLAGS_MAGIC; } /** * Allocates a error info structure with a buffer at least the given size. * * @returns Pointer to an error info structure on success, NULL on failure. * * @param cbMsg The minimum message buffer size. Use 0 to get * the default buffer size. */ RTDECL(PRTERRINFO) RTErrInfoAlloc(size_t cbMsg); /** * Same as RTErrInfoAlloc, except that an IPRT status code is returned. * * @returns IPRT status code. * * @param cbMsg The minimum message buffer size. Use 0 to get * the default buffer size. * @param ppErrInfo Where to store the pointer to the allocated * error info structure on success. This is * always set to NULL. */ RTDECL(int) RTErrInfoAllocEx(size_t cbMsg, PRTERRINFO *ppErrInfo); /** * Frees an error info structure allocated by RTErrInfoAlloc or * RTErrInfoAllocEx. * * @param pErrInfo The error info structure. */ RTDECL(void) RTErrInfoFree(PRTERRINFO pErrInfo); /** * Fills in the error info details. * * @returns @a rc. * * @param pErrInfo The error info structure to fill in. * @param rc The status code to return. * @param pszMsg The error message string. */ RTDECL(int) RTErrInfoSet(PRTERRINFO pErrInfo, int rc, const char *pszMsg); /** * Fills in the error info details, with a sprintf style message. * * @returns @a rc. * * @param pErrInfo The error info structure to fill in. * @param rc The status code to return. * @param pszFormat The format string. * @param ... The format arguments. */ RTDECL(int) RTErrInfoSetF(PRTERRINFO pErrInfo, int rc, const char *pszFormat, ...); /** * Fills in the error info details, with a vsprintf style message. * * @returns @a rc. * * @param pErrInfo The error info structure to fill in. * @param rc The status code to return. * @param pszFormat The format string. * @param va The format arguments. */ RTDECL(int) RTErrInfoSetV(PRTERRINFO pErrInfo, int rc, const char *pszFormat, va_list va); /** * Checks if the error info is set. * * @returns true if set, false if not. * @param pErrInfo The error info structure. NULL is OK. */ DECLINLINE(bool) RTErrInfoIsSet(PCRTERRINFO pErrInfo) { if (!pErrInfo) return false; return (pErrInfo->fFlags & (RTERRINFO_FLAGS_MAGIC_MASK | RTERRINFO_FLAGS_SET)) == (RTERRINFO_FLAGS_MAGIC | RTERRINFO_FLAGS_SET); } /** * Clears the error info structure. * * @param pErrInfo The error info structure. NULL is OK. */ DECLINLINE(void) RTErrInfoClear(PRTERRINFO pErrInfo) { if (pErrInfo) { pErrInfo->fFlags &= ~RTERRINFO_FLAGS_SET; pErrInfo->rc = /*VINF_SUCCESS*/0; *pErrInfo->pszMsg = '\0'; } } /** * Storage for error variables. * * @remarks Do NOT touch the members! They are platform specific and what's * where may change at any time! */ typedef union RTERRVARS { int8_t ai8Vars[32]; int16_t ai16Vars[16]; int32_t ai32Vars[8]; int64_t ai64Vars[4]; } RTERRVARS; /** Pointer to an error variable storage union. */ typedef RTERRVARS *PRTERRVARS; /** Pointer to a const error variable storage union. */ typedef RTERRVARS const *PCRTERRVARS; /** * Saves the error variables. * * @returns @a pVars. * @param pVars The variable storage union. */ RTDECL(PRTERRVARS) RTErrVarsSave(PRTERRVARS pVars); /** * Restores the error variables. * * @param pVars The variable storage union. */ RTDECL(void) RTErrVarsRestore(PCRTERRVARS pVars); /** * Checks if the first variable set equals the second. * * @returns true if they are equal, false if not. * @param pVars1 The first variable storage union. * @param pVars2 The second variable storage union. */ RTDECL(bool) RTErrVarsAreEqual(PCRTERRVARS pVars1, PCRTERRVARS pVars2); /** * Checks if the (live) error variables have changed since we saved them. * * @returns @c true if they have changed, @c false if not. * @param pVars The saved variables to compare the current state * against. */ RTDECL(bool) RTErrVarsHaveChanged(PCRTERRVARS pVars); RT_C_DECLS_END /** @} */ /** @name Status Code Ranges * @{ */ /** The first status code in the primary IPRT range. */ #define RTERR_RANGE1_FIRST 0 /** The last status code in the primary IPRT range. */ #define RTERR_RANGE1_LAST 999 /** The first status code in the secondary IPRT range. */ #define RTERR_RANGE2_FIRST 22000 /** The last status code in the secondary IPRT range. */ #define RTERR_RANGE2_LAST 32766 /** The first status code in the user range. */ #define RTERR_USER_FIRST 1000 /** The last status code in the user range. */ #define RTERR_USER_LAST 21999 /** @} */ /* SED-START */ /** @name Misc. Status Codes * @{ */ /** Success. */ #define VINF_SUCCESS 0 /** General failure - DON'T USE THIS!!! */ #define VERR_GENERAL_FAILURE (-1) /** Invalid parameter. */ #define VERR_INVALID_PARAMETER (-2) /** Invalid parameter. */ #define VWRN_INVALID_PARAMETER 2 /** Invalid magic or cookie. */ #define VERR_INVALID_MAGIC (-3) /** Invalid magic or cookie. */ #define VWRN_INVALID_MAGIC 3 /** Invalid loader handle. */ #define VERR_INVALID_HANDLE (-4) /** Invalid loader handle. */ #define VWRN_INVALID_HANDLE 4 /** Failed to lock the address range. */ #define VERR_LOCK_FAILED (-5) /** Invalid memory pointer. */ #define VERR_INVALID_POINTER (-6) /** Failed to patch the IDT. */ #define VERR_IDT_FAILED (-7) /** Memory allocation failed. */ #define VERR_NO_MEMORY (-8) /** Already loaded. */ #define VERR_ALREADY_LOADED (-9) /** Permission denied. */ #define VERR_PERMISSION_DENIED (-10) /** Permission denied. */ #define VINF_PERMISSION_DENIED 10 /** Version mismatch. */ #define VERR_VERSION_MISMATCH (-11) /** The request function is not implemented. */ #define VERR_NOT_IMPLEMENTED (-12) /** Not equal. */ #define VERR_NOT_EQUAL (-18) /** The specified path does not point at a symbolic link. */ #define VERR_NOT_SYMLINK (-19) /** Failed to allocate temporary memory. */ #define VERR_NO_TMP_MEMORY (-20) /** Invalid file mode mask (RTFMODE). */ #define VERR_INVALID_FMODE (-21) /** Incorrect call order. */ #define VERR_WRONG_ORDER (-22) /** There is no TLS (thread local storage) available for storing the current thread. */ #define VERR_NO_TLS_FOR_SELF (-23) /** Failed to set the TLS (thread local storage) entry which points to our thread structure. */ #define VERR_FAILED_TO_SET_SELF_TLS (-24) /** Not able to allocate contiguous memory. */ #define VERR_NO_CONT_MEMORY (-26) /** No memory available for page table or page directory. */ #define VERR_NO_PAGE_MEMORY (-27) /** Already initialized. */ #define VINF_ALREADY_INITIALIZED 28 /** The specified thread is dead. */ #define VERR_THREAD_IS_DEAD (-29) /** The specified thread is not waitable. */ #define VERR_THREAD_NOT_WAITABLE (-30) /** Pagetable not present. */ #define VERR_PAGE_TABLE_NOT_PRESENT (-31) /** Invalid context. * Typically an API was used by the wrong thread. */ #define VERR_INVALID_CONTEXT (-32) /** The per process timer is busy. */ #define VERR_TIMER_BUSY (-33) /** Address conflict. */ #define VERR_ADDRESS_CONFLICT (-34) /** Unresolved (unknown) host platform error. */ #define VERR_UNRESOLVED_ERROR (-35) /** Invalid function. */ #define VERR_INVALID_FUNCTION (-36) /** Not supported. */ #define VERR_NOT_SUPPORTED (-37) /** Not supported. */ #define VINF_NOT_SUPPORTED 37 /** Access denied. */ #define VERR_ACCESS_DENIED (-38) /** Call interrupted. */ #define VERR_INTERRUPTED (-39) /** Call interrupted. */ #define VINF_INTERRUPTED 39 /** Timeout. */ #define VERR_TIMEOUT (-40) /** Timeout. */ #define VINF_TIMEOUT 40 /** Buffer too small to save result. */ #define VERR_BUFFER_OVERFLOW (-41) /** Buffer too small to save result. */ #define VINF_BUFFER_OVERFLOW 41 /** Data size overflow. */ #define VERR_TOO_MUCH_DATA (-42) /** Max threads number reached. */ #define VERR_MAX_THRDS_REACHED (-43) /** Max process number reached. */ #define VERR_MAX_PROCS_REACHED (-44) /** The recipient process has refused the signal. */ #define VERR_SIGNAL_REFUSED (-45) /** A signal is already pending. */ #define VERR_SIGNAL_PENDING (-46) /** The signal being posted is not correct. */ #define VERR_SIGNAL_INVALID (-47) /** The state changed. * This is a generic error message and needs a context to make sense. */ #define VERR_STATE_CHANGED (-48) /** Warning, the state changed. * This is a generic error message and needs a context to make sense. */ #define VWRN_STATE_CHANGED 48 /** Error while parsing UUID string */ #define VERR_INVALID_UUID_FORMAT (-49) /** The specified process was not found. */ #define VERR_PROCESS_NOT_FOUND (-50) /** The process specified to a non-block wait had not exited. */ #define VERR_PROCESS_RUNNING (-51) /** Retry the operation. */ #define VERR_TRY_AGAIN (-52) /** Retry the operation. */ #define VINF_TRY_AGAIN 52 /** Generic parse error. */ #define VERR_PARSE_ERROR (-53) /** Value out of range. */ #define VERR_OUT_OF_RANGE (-54) /** A numeric conversion encountered a value which was too big for the target. */ #define VERR_NUMBER_TOO_BIG (-55) /** A numeric conversion encountered a value which was too big for the target. */ #define VWRN_NUMBER_TOO_BIG 55 /** The number begin converted (string) contained no digits. */ #define VERR_NO_DIGITS (-56) /** The number begin converted (string) contained no digits. */ #define VWRN_NO_DIGITS 56 /** Encountered a '-' during conversion to an unsigned value. */ #define VERR_NEGATIVE_UNSIGNED (-57) /** Encountered a '-' during conversion to an unsigned value. */ #define VWRN_NEGATIVE_UNSIGNED 57 /** Error while characters translation (unicode and so). */ #define VERR_NO_TRANSLATION (-58) /** Encountered unicode code point which is reserved for use as endian indicator (0xffff or 0xfffe). */ #define VERR_CODE_POINT_ENDIAN_INDICATOR (-59) /** Encountered unicode code point in the surrogate range (0xd800 to 0xdfff). */ #define VERR_CODE_POINT_SURROGATE (-60) /** A string claiming to be UTF-8 is incorrectly encoded. */ #define VERR_INVALID_UTF8_ENCODING (-61) /** Ad string claiming to be in UTF-16 is incorrectly encoded. */ #define VERR_INVALID_UTF16_ENCODING (-62) /** Encountered a unicode code point which cannot be represented as UTF-16. */ #define VERR_CANT_RECODE_AS_UTF16 (-63) /** Got an out of memory condition trying to allocate a string. */ #define VERR_NO_STR_MEMORY (-64) /** Got an out of memory condition trying to allocate a UTF-16 (/UCS-2) string. */ #define VERR_NO_UTF16_MEMORY (-65) /** Get an out of memory condition trying to allocate a code point array. */ #define VERR_NO_CODE_POINT_MEMORY (-66) /** Can't free the memory because it's used in mapping. */ #define VERR_MEMORY_BUSY (-67) /** The timer can't be started because it's already active. */ #define VERR_TIMER_ACTIVE (-68) /** The timer can't be stopped because i's already suspended. */ #define VERR_TIMER_SUSPENDED (-69) /** The operation was cancelled by the user (copy) or another thread (local ipc). */ #define VERR_CANCELLED (-70) /** Failed to initialize a memory object. * Exactly what this means is OS specific. */ #define VERR_MEMOBJ_INIT_FAILED (-71) /** Out of memory condition when allocating memory with low physical backing. */ #define VERR_NO_LOW_MEMORY (-72) /** Out of memory condition when allocating physical memory (without mapping). */ #define VERR_NO_PHYS_MEMORY (-73) /** The address (virtual or physical) is too big. */ #define VERR_ADDRESS_TOO_BIG (-74) /** Failed to map a memory object. */ #define VERR_MAP_FAILED (-75) /** Trailing characters. */ #define VERR_TRAILING_CHARS (-76) /** Trailing characters. */ #define VWRN_TRAILING_CHARS 76 /** Trailing spaces. */ #define VERR_TRAILING_SPACES (-77) /** Trailing spaces. */ #define VWRN_TRAILING_SPACES 77 /** Generic not found error. */ #define VERR_NOT_FOUND (-78) /** Generic not found warning. */ #define VWRN_NOT_FOUND 78 /** Generic invalid state error. */ #define VERR_INVALID_STATE (-79) /** Generic invalid state warning. */ #define VWRN_INVALID_STATE 79 /** Generic out of resources error. */ #define VERR_OUT_OF_RESOURCES (-80) /** Generic out of resources warning. */ #define VWRN_OUT_OF_RESOURCES 80 /** No more handles available, too many open handles. */ #define VERR_NO_MORE_HANDLES (-81) /** Preemption is disabled. * The requested operation can only be performed when preemption is enabled. */ #define VERR_PREEMPT_DISABLED (-82) /** End of string. */ #define VERR_END_OF_STRING (-83) /** End of string. */ #define VINF_END_OF_STRING 83 /** A page count is out of range. */ #define VERR_PAGE_COUNT_OUT_OF_RANGE (-84) /** Generic object destroyed status. */ #define VERR_OBJECT_DESTROYED (-85) /** Generic object was destroyed by the call status. */ #define VINF_OBJECT_DESTROYED 85 /** Generic dangling objects status. */ #define VERR_DANGLING_OBJECTS (-86) /** Generic dangling objects status. */ #define VWRN_DANGLING_OBJECTS 86 /** Invalid Base64 encoding. */ #define VERR_INVALID_BASE64_ENCODING (-87) /** Return instigated by a callback or similar. */ #define VERR_CALLBACK_RETURN (-88) /** Return instigated by a callback or similar. */ #define VINF_CALLBACK_RETURN 88 /** Authentication failure. */ #define VERR_AUTHENTICATION_FAILURE (-89) /** Not a power of two. */ #define VERR_NOT_POWER_OF_TWO (-90) /** Status code, typically given as a parameter, that isn't supposed to be used. */ #define VERR_IGNORED (-91) /** Concurrent access to the object is not allowed. */ #define VERR_CONCURRENT_ACCESS (-92) /** The caller does not have a reference to the object. * This status is used when two threads is caught sharing the same object * reference. */ #define VERR_CALLER_NO_REFERENCE (-93) /** Generic no change error. */ #define VERR_NO_CHANGE (-95) /** Generic no change info. */ #define VINF_NO_CHANGE 95 /** Out of memory condition when allocating executable memory. */ #define VERR_NO_EXEC_MEMORY (-96) /** The alignment is not supported. */ #define VERR_UNSUPPORTED_ALIGNMENT (-97) /** The alignment is not really supported, however we got lucky with this * allocation. */ #define VINF_UNSUPPORTED_ALIGNMENT 97 /** Duplicate something. */ #define VERR_DUPLICATE (-98) /** Something is missing. */ #define VERR_MISSING (-99) /** An unexpected (/unknown) exception was caught. */ #define VERR_UNEXPECTED_EXCEPTION (-22400) /** Buffer underflow. */ #define VERR_BUFFER_UNDERFLOW (-22401) /** Buffer underflow. */ #define VINF_BUFFER_UNDERFLOW 22401 /** Uneven input. */ #define VERR_UNEVEN_INPUT (-22402) /** Something is not available or not working properly. */ #define VERR_NOT_AVAILABLE (-22403) /** @} */ /** @name Common File/Disk/Pipe/etc Status Codes * @{ */ /** Unresolved (unknown) file i/o error. */ #define VERR_FILE_IO_ERROR (-100) /** File/Device open failed. */ #define VERR_OPEN_FAILED (-101) /** File not found. */ #define VERR_FILE_NOT_FOUND (-102) /** Path not found. */ #define VERR_PATH_NOT_FOUND (-103) /** Invalid (malformed) file/path name. */ #define VERR_INVALID_NAME (-104) /** The object in question already exists. */ #define VERR_ALREADY_EXISTS (-105) /** The object in question already exists. */ #define VWRN_ALREADY_EXISTS 105 /** Too many open files. */ #define VERR_TOO_MANY_OPEN_FILES (-106) /** Seek error. */ #define VERR_SEEK (-107) /** Seek below file start. */ #define VERR_NEGATIVE_SEEK (-108) /** Trying to seek on device. */ #define VERR_SEEK_ON_DEVICE (-109) /** Reached the end of the file. */ #define VERR_EOF (-110) /** Reached the end of the file. */ #define VINF_EOF 110 /** Generic file read error. */ #define VERR_READ_ERROR (-111) /** Generic file write error. */ #define VERR_WRITE_ERROR (-112) /** Write protect error. */ #define VERR_WRITE_PROTECT (-113) /** Sharing violation, file is being used by another process. */ #define VERR_SHARING_VIOLATION (-114) /** Unable to lock a region of a file. */ #define VERR_FILE_LOCK_FAILED (-115) /** File access error, another process has locked a portion of the file. */ #define VERR_FILE_LOCK_VIOLATION (-116) /** File or directory can't be created. */ #define VERR_CANT_CREATE (-117) /** Directory can't be deleted. */ #define VERR_CANT_DELETE_DIRECTORY (-118) /** Can't move file to another disk. */ #define VERR_NOT_SAME_DEVICE (-119) /** The filename or extension is too long. */ #define VERR_FILENAME_TOO_LONG (-120) /** Media not present in drive. */ #define VERR_MEDIA_NOT_PRESENT (-121) /** The type of media was not recognized. Not formatted? */ #define VERR_MEDIA_NOT_RECOGNIZED (-122) /** Can't unlock - region was not locked. */ #define VERR_FILE_NOT_LOCKED (-123) /** Unrecoverable error: lock was lost. */ #define VERR_FILE_LOCK_LOST (-124) /** Can't delete directory with files. */ #define VERR_DIR_NOT_EMPTY (-125) /** A directory operation was attempted on a non-directory object. */ #define VERR_NOT_A_DIRECTORY (-126) /** A non-directory operation was attempted on a directory object. */ #define VERR_IS_A_DIRECTORY (-127) /** Tried to grow a file beyond the limit imposed by the process or the filesystem. */ #define VERR_FILE_TOO_BIG (-128) /** No pending request the aio context has to wait for completion. */ #define VERR_FILE_AIO_NO_REQUEST (-129) /** The request could not be canceled or prepared for another transfer * because it is still in progress. */ #define VERR_FILE_AIO_IN_PROGRESS (-130) /** The request could not be canceled because it already completed. */ #define VERR_FILE_AIO_COMPLETED (-131) /** The I/O context couldn't be destroyed because there are still pending requests. */ #define VERR_FILE_AIO_BUSY (-132) /** The requests couldn't be submitted because that would exceed the capacity of the context. */ #define VERR_FILE_AIO_LIMIT_EXCEEDED (-133) /** The request was canceled. */ #define VERR_FILE_AIO_CANCELED (-134) /** The request wasn't submitted so it can't be canceled. */ #define VERR_FILE_AIO_NOT_SUBMITTED (-135) /** A request was not prepared and thus could not be submitted. */ #define VERR_FILE_AIO_NOT_PREPARED (-136) /** Not all requests could be submitted due to resource shortage. */ #define VERR_FILE_AIO_INSUFFICIENT_RESSOURCES (-137) /** Device or resource is busy. */ #define VERR_RESOURCE_BUSY (-138) /** A file operation was attempted on a non-file object. */ #define VERR_NOT_A_FILE (-139) /** A non-file operation was attempted on a file object. */ #define VERR_IS_A_FILE (-140) /** Unexpected filesystem object type. */ #define VERR_UNEXPECTED_FS_OBJ_TYPE (-141) /** A path does not start with a root specification. */ #define VERR_PATH_DOES_NOT_START_WITH_ROOT (-142) /** A path is relative, expected an absolute path. */ #define VERR_PATH_IS_RELATIVE (-143) /** A path is not relative (start with root), expected an relative path. */ #define VERR_PATH_IS_NOT_RELATIVE (-144) /** @} */ /** @name Generic Filesystem I/O Status Codes * @{ */ /** Unresolved (unknown) disk i/o error. */ #define VERR_DISK_IO_ERROR (-150) /** Invalid drive number. */ #define VERR_INVALID_DRIVE (-151) /** Disk is full. */ #define VERR_DISK_FULL (-152) /** Disk was changed. */ #define VERR_DISK_CHANGE (-153) /** Drive is locked. */ #define VERR_DRIVE_LOCKED (-154) /** The specified disk or diskette cannot be accessed. */ #define VERR_DISK_INVALID_FORMAT (-155) /** Too many symbolic links. */ #define VERR_TOO_MANY_SYMLINKS (-156) /** The OS does not support setting the time stamps on a symbolic link. */ #define VERR_NS_SYMLINK_SET_TIME (-157) /** The OS does not support changing the owner of a symbolic link. */ #define VERR_NS_SYMLINK_CHANGE_OWNER (-158) /** @} */ /** @name Generic Directory Enumeration Status Codes * @{ */ /** Unresolved (unknown) search error. */ #define VERR_SEARCH_ERROR (-200) /** No more files found. */ #define VERR_NO_MORE_FILES (-201) /** No more search handles available. */ #define VERR_NO_MORE_SEARCH_HANDLES (-202) /** RTDirReadEx() failed to retrieve the extra data which was requested. */ #define VWRN_NO_DIRENT_INFO 203 /** @} */ /** @name Internal Processing Errors * @{ */ /** Internal error - we're screwed if this happens. */ #define VERR_INTERNAL_ERROR (-225) /** Internal error no. 2. */ #define VERR_INTERNAL_ERROR_2 (-226) /** Internal error no. 3. */ #define VERR_INTERNAL_ERROR_3 (-227) /** Internal error no. 4. */ #define VERR_INTERNAL_ERROR_4 (-228) /** Internal error no. 5. */ #define VERR_INTERNAL_ERROR_5 (-229) /** Internal error: Unexpected status code. */ #define VERR_IPE_UNEXPECTED_STATUS (-230) /** Internal error: Unexpected status code. */ #define VERR_IPE_UNEXPECTED_INFO_STATUS (-231) /** Internal error: Unexpected status code. */ #define VERR_IPE_UNEXPECTED_ERROR_STATUS (-232) /** Internal error: Uninitialized status code. * @remarks This is used by value elsewhere. */ #define VERR_IPE_UNINITIALIZED_STATUS (-233) /** Internal error: Supposedly unreachable default case in a switch. */ #define VERR_IPE_NOT_REACHED_DEFAULT_CASE (-234) /** @} */ /** @name Generic Device I/O Status Codes * @{ */ /** Unresolved (unknown) device i/o error. */ #define VERR_DEV_IO_ERROR (-250) /** Device i/o: Bad unit. */ #define VERR_IO_BAD_UNIT (-251) /** Device i/o: Not ready. */ #define VERR_IO_NOT_READY (-252) /** Device i/o: Bad command. */ #define VERR_IO_BAD_COMMAND (-253) /** Device i/o: CRC error. */ #define VERR_IO_CRC (-254) /** Device i/o: Bad length. */ #define VERR_IO_BAD_LENGTH (-255) /** Device i/o: Sector not found. */ #define VERR_IO_SECTOR_NOT_FOUND (-256) /** Device i/o: General failure. */ #define VERR_IO_GEN_FAILURE (-257) /** @} */ /** @name Generic Pipe I/O Status Codes * @{ */ /** Unresolved (unknown) pipe i/o error. */ #define VERR_PIPE_IO_ERROR (-300) /** Broken pipe. */ #define VERR_BROKEN_PIPE (-301) /** Bad pipe. */ #define VERR_BAD_PIPE (-302) /** Pipe is busy. */ #define VERR_PIPE_BUSY (-303) /** No data in pipe. */ #define VERR_NO_DATA (-304) /** Pipe is not connected. */ #define VERR_PIPE_NOT_CONNECTED (-305) /** More data available in pipe. */ #define VERR_MORE_DATA (-306) /** Expected read pipe, got a write pipe instead. */ #define VERR_PIPE_NOT_READ (-307) /** Expected write pipe, got a read pipe instead. */ #define VERR_PIPE_NOT_WRITE (-308) /** @} */ /** @name Generic Semaphores Status Codes * @{ */ /** Unresolved (unknown) semaphore error. */ #define VERR_SEM_ERROR (-350) /** Too many semaphores. */ #define VERR_TOO_MANY_SEMAPHORES (-351) /** Exclusive semaphore is owned by another process. */ #define VERR_EXCL_SEM_ALREADY_OWNED (-352) /** The semaphore is set and cannot be closed. */ #define VERR_SEM_IS_SET (-353) /** The semaphore cannot be set again. */ #define VERR_TOO_MANY_SEM_REQUESTS (-354) /** Attempt to release mutex not owned by caller. */ #define VERR_NOT_OWNER (-355) /** The semaphore has been opened too many times. */ #define VERR_TOO_MANY_OPENS (-356) /** The maximum posts for the event semaphore has been reached. */ #define VERR_TOO_MANY_POSTS (-357) /** The event semaphore has already been posted. */ #define VERR_ALREADY_POSTED (-358) /** The event semaphore has already been reset. */ #define VERR_ALREADY_RESET (-359) /** The semaphore is in use. */ #define VERR_SEM_BUSY (-360) /** The previous ownership of this semaphore has ended. */ #define VERR_SEM_OWNER_DIED (-361) /** Failed to open semaphore by name - not found. */ #define VERR_SEM_NOT_FOUND (-362) /** Semaphore destroyed while waiting. */ #define VERR_SEM_DESTROYED (-363) /** Nested ownership requests are not permitted for this semaphore type. */ #define VERR_SEM_NESTED (-364) /** The release call only release a semaphore nesting, i.e. the caller is still * holding the semaphore. */ #define VINF_SEM_NESTED (364) /** Deadlock detected. */ #define VERR_DEADLOCK (-365) /** Ping-Pong listen or speak out of turn error. */ #define VERR_SEM_OUT_OF_TURN (-366) /** Tried to take a semaphore in a bad context. */ #define VERR_SEM_BAD_CONTEXT (-367) /** Don't spin for the semaphore, but it is safe to try grab it. */ #define VINF_SEM_BAD_CONTEXT (367) /** Wrong locking order detected. */ #define VERR_SEM_LV_WRONG_ORDER (-368) /** Wrong release order detected. */ #define VERR_SEM_LV_WRONG_RELEASE_ORDER (-369) /** Attempt to recursively enter a non-recurisve lock. */ #define VERR_SEM_LV_NESTED (-370) /** Invalid parameters passed to the lock validator. */ #define VERR_SEM_LV_INVALID_PARAMETER (-371) /** The lock validator detected a deadlock. */ #define VERR_SEM_LV_DEADLOCK (-372) /** The lock validator detected an existing deadlock. * The deadlock was not caused by the current operation, but existed already. */ #define VERR_SEM_LV_EXISTING_DEADLOCK (-373) /** Not the lock owner according our records. */ #define VERR_SEM_LV_NOT_OWNER (-374) /** An illegal lock upgrade was attempted. */ #define VERR_SEM_LV_ILLEGAL_UPGRADE (-375) /** The thread is not a valid signaller of the event. */ #define VERR_SEM_LV_NOT_SIGNALLER (-376) /** Internal error in the lock validator or related components. */ #define VERR_SEM_LV_INTERNAL_ERROR (-377) /** @} */ /** @name Generic Network I/O Status Codes * @{ */ /** Unresolved (unknown) network error. */ #define VERR_NET_IO_ERROR (-400) /** The network is busy or is out of resources. */ #define VERR_NET_OUT_OF_RESOURCES (-401) /** Net host name not found. */ #define VERR_NET_HOST_NOT_FOUND (-402) /** Network path not found. */ #define VERR_NET_PATH_NOT_FOUND (-403) /** General network printing error. */ #define VERR_NET_PRINT_ERROR (-404) /** The machine is not on the network. */ #define VERR_NET_NO_NETWORK (-405) /** Name is not unique on the network. */ #define VERR_NET_NOT_UNIQUE_NAME (-406) /* These are BSD networking error codes - numbers correspond, don't mess! */ /** Operation in progress. */ #define VERR_NET_IN_PROGRESS (-436) /** Operation already in progress. */ #define VERR_NET_ALREADY_IN_PROGRESS (-437) /** Attempted socket operation with a non-socket handle. * (This includes closed handles.) */ #define VERR_NET_NOT_SOCKET (-438) /** Destination address required. */ #define VERR_NET_DEST_ADDRESS_REQUIRED (-439) /** Message too long. */ #define VERR_NET_MSG_SIZE (-440) /** Protocol wrong type for socket. */ #define VERR_NET_PROTOCOL_TYPE (-441) /** Protocol not available. */ #define VERR_NET_PROTOCOL_NOT_AVAILABLE (-442) /** Protocol not supported. */ #define VERR_NET_PROTOCOL_NOT_SUPPORTED (-443) /** Socket type not supported. */ #define VERR_NET_SOCKET_TYPE_NOT_SUPPORTED (-444) /** Operation not supported. */ #define VERR_NET_OPERATION_NOT_SUPPORTED (-445) /** Protocol family not supported. */ #define VERR_NET_PROTOCOL_FAMILY_NOT_SUPPORTED (-446) /** Address family not supported by protocol family. */ #define VERR_NET_ADDRESS_FAMILY_NOT_SUPPORTED (-447) /** Address already in use. */ #define VERR_NET_ADDRESS_IN_USE (-448) /** Can't assign requested address. */ #define VERR_NET_ADDRESS_NOT_AVAILABLE (-449) /** Network is down. */ #define VERR_NET_DOWN (-450) /** Network is unreachable. */ #define VERR_NET_UNREACHABLE (-451) /** Network dropped connection on reset. */ #define VERR_NET_CONNECTION_RESET (-452) /** Software caused connection abort. */ #define VERR_NET_CONNECTION_ABORTED (-453) /** Connection reset by peer. */ #define VERR_NET_CONNECTION_RESET_BY_PEER (-454) /** No buffer space available. */ #define VERR_NET_NO_BUFFER_SPACE (-455) /** Socket is already connected. */ #define VERR_NET_ALREADY_CONNECTED (-456) /** Socket is not connected. */ #define VERR_NET_NOT_CONNECTED (-457) /** Can't send after socket shutdown. */ #define VERR_NET_SHUTDOWN (-458) /** Too many references: can't splice. */ #define VERR_NET_TOO_MANY_REFERENCES (-459) /** Too many references: can't splice. */ #define VERR_NET_CONNECTION_TIMED_OUT (-460) /** Connection refused. */ #define VERR_NET_CONNECTION_REFUSED (-461) /* ELOOP is not net. */ /* ENAMETOOLONG is not net. */ /** Host is down. */ #define VERR_NET_HOST_DOWN (-464) /** No route to host. */ #define VERR_NET_HOST_UNREACHABLE (-465) /** Protocol error. */ #define VERR_NET_PROTOCOL_ERROR (-466) /** @} */ /** @name TCP Status Codes * @{ */ /** Stop the TCP server. */ #define VERR_TCP_SERVER_STOP (-500) /** The server was stopped. */ #define VINF_TCP_SERVER_STOP 500 /** The TCP server was shut down using RTTcpServerShutdown. */ #define VERR_TCP_SERVER_SHUTDOWN (-501) /** The TCP server was destroyed. */ #define VERR_TCP_SERVER_DESTROYED (-502) /** The TCP server has no client associated with it. */ #define VINF_TCP_SERVER_NO_CLIENT 503 /** @} */ /** @name UDP Status Codes * @{ */ /** Stop the UDP server. */ #define VERR_UDP_SERVER_STOP (-520) /** The server was stopped. */ #define VINF_UDP_SERVER_STOP 520 /** The UDP server was shut down using RTUdpServerShutdown. */ #define VERR_UDP_SERVER_SHUTDOWN (-521) /** The UDP server was destroyed. */ #define VERR_UDP_SERVER_DESTROYED (-522) /** The UDP server has no client associated with it. */ #define VINF_UDP_SERVER_NO_CLIENT 523 /** @} */ /** @name L4 Specific Status Codes * @{ */ /** Invalid offset in an L4 dataspace */ #define VERR_L4_INVALID_DS_OFFSET (-550) /** IPC error */ #define VERR_IPC (-551) /** Item already used */ #define VERR_RESOURCE_IN_USE (-552) /** Source/destination not found */ #define VERR_IPC_PROCESS_NOT_FOUND (-553) /** Receive timeout */ #define VERR_IPC_RECEIVE_TIMEOUT (-554) /** Send timeout */ #define VERR_IPC_SEND_TIMEOUT (-555) /** Receive cancelled */ #define VERR_IPC_RECEIVE_CANCELLED (-556) /** Send cancelled */ #define VERR_IPC_SEND_CANCELLED (-557) /** Receive aborted */ #define VERR_IPC_RECEIVE_ABORTED (-558) /** Send aborted */ #define VERR_IPC_SEND_ABORTED (-559) /** Couldn't map pages during receive */ #define VERR_IPC_RECEIVE_MAP_FAILED (-560) /** Couldn't map pages during send */ #define VERR_IPC_SEND_MAP_FAILED (-561) /** Send pagefault timeout in receive */ #define VERR_IPC_RECEIVE_SEND_PF_TIMEOUT (-562) /** Send pagefault timeout in send */ #define VERR_IPC_SEND_SEND_PF_TIMEOUT (-563) /** (One) receive buffer was too small, or too few buffers */ #define VINF_IPC_RECEIVE_MSG_CUT 564 /** (One) send buffer was too small, or too few buffers */ #define VINF_IPC_SEND_MSG_CUT 565 /** Dataspace manager server not found */ #define VERR_L4_DS_MANAGER_NOT_FOUND (-566) /** @} */ /** @name Loader Status Codes. * @{ */ /** Invalid executable signature. */ #define VERR_INVALID_EXE_SIGNATURE (-600) /** The iprt loader recognized a ELF image, but doesn't support loading it. */ #define VERR_ELF_EXE_NOT_SUPPORTED (-601) /** The iprt loader recognized a PE image, but doesn't support loading it. */ #define VERR_PE_EXE_NOT_SUPPORTED (-602) /** The iprt loader recognized a LX image, but doesn't support loading it. */ #define VERR_LX_EXE_NOT_SUPPORTED (-603) /** The iprt loader recognized a LE image, but doesn't support loading it. */ #define VERR_LE_EXE_NOT_SUPPORTED (-604) /** The iprt loader recognized a NE image, but doesn't support loading it. */ #define VERR_NE_EXE_NOT_SUPPORTED (-605) /** The iprt loader recognized a MZ image, but doesn't support loading it. */ #define VERR_MZ_EXE_NOT_SUPPORTED (-606) /** The iprt loader recognized an a.out image, but doesn't support loading it. */ #define VERR_AOUT_EXE_NOT_SUPPORTED (-607) /** Bad executable. */ #define VERR_BAD_EXE_FORMAT (-608) /** Symbol (export) not found. */ #define VERR_SYMBOL_NOT_FOUND (-609) /** Module not found. */ #define VERR_MODULE_NOT_FOUND (-610) /** The loader resolved an external symbol to an address to big for the image format. */ #define VERR_SYMBOL_VALUE_TOO_BIG (-611) /** The image is too big. */ #define VERR_IMAGE_TOO_BIG (-612) /** The image base address is to high for this image type. */ #define VERR_IMAGE_BASE_TOO_HIGH (-614) /** Mismatching architecture. */ #define VERR_LDR_ARCH_MISMATCH (-615) /** Mismatch between IPRT and native loader. */ #define VERR_LDR_MISMATCH_NATIVE (-616) /** Failed to resolve an imported (external) symbol. */ #define VERR_LDR_IMPORTED_SYMBOL_NOT_FOUND (-617) /** Generic loader failure. */ #define VERR_LDR_GENERAL_FAILURE (-618) /** Code signing error. */ #define VERR_LDR_IMAGE_HASH (-619) /** The PE loader encountered delayed imports, a feature which hasn't been implemented yet. */ #define VERR_LDRPE_DELAY_IMPORT (-620) /** The PE loader encountered a malformed certificate. */ #define VERR_LDRPE_CERT_MALFORMED (-621) /** The PE loader encountered a certificate with an unsupported type or structure revision. */ #define VERR_LDRPE_CERT_UNSUPPORTED (-622) /** The PE loader doesn't know how to deal with the global pointer data directory entry yet. */ #define VERR_LDRPE_GLOBALPTR (-623) /** The PE loader doesn't support the TLS data directory yet. */ #define VERR_LDRPE_TLS (-624) /** The PE loader doesn't grok the COM descriptor data directory entry. */ #define VERR_LDRPE_COM_DESCRIPTOR (-625) /** The PE loader encountered an unknown load config directory/header size. */ #define VERR_LDRPE_LOAD_CONFIG_SIZE (-626) /** The PE loader encountered a lock prefix table, a feature which hasn't been implemented yet. */ #define VERR_LDRPE_LOCK_PREFIX_TABLE (-627) /** The ELF loader doesn't handle foreign endianness. */ #define VERR_LDRELF_ODD_ENDIAN (-630) /** The ELF image is 'dynamic', the ELF loader can only deal with 'relocatable' images at present. */ #define VERR_LDRELF_DYN (-631) /** The ELF image is 'executable', the ELF loader can only deal with 'relocatable' images at present. */ #define VERR_LDRELF_EXEC (-632) /** The ELF image was created for an unsupported target machine type. */ #define VERR_LDRELF_MACHINE (-633) /** The ELF version is not supported. */ #define VERR_LDRELF_VERSION (-634) /** The ELF loader cannot handle multiple SYMTAB sections. */ #define VERR_LDRELF_MULTIPLE_SYMTABS (-635) /** The ELF loader encountered a relocation type which is not implemented. */ #define VERR_LDRELF_RELOCATION_NOT_SUPPORTED (-636) /** The ELF loader encountered a bad symbol index. */ #define VERR_LDRELF_INVALID_SYMBOL_INDEX (-637) /** The ELF loader encountered an invalid symbol name offset. */ #define VERR_LDRELF_INVALID_SYMBOL_NAME_OFFSET (-638) /** The ELF loader encountered an invalid relocation offset. */ #define VERR_LDRELF_INVALID_RELOCATION_OFFSET (-639) /** The ELF loader didn't find the symbol/string table for the image. */ #define VERR_LDRELF_NO_SYMBOL_OR_NO_STRING_TABS (-640) /** Invalid link address. */ #define VERR_LDR_INVALID_LINK_ADDRESS (-647) /** Invalid image relative virtual address. */ #define VERR_LDR_INVALID_RVA (-648) /** Invalid segment:offset address. */ #define VERR_LDR_INVALID_SEG_OFFSET (-649) /** @}*/ /** @name Debug Info Reader Status Codes. * @{ */ /** The module contains no line number information. */ #define VERR_DBG_NO_LINE_NUMBERS (-650) /** The module contains no symbol information. */ #define VERR_DBG_NO_SYMBOLS (-651) /** The specified segment:offset address was invalid. Typically an attempt at * addressing outside the segment boundary. */ #define VERR_DBG_INVALID_ADDRESS (-652) /** Invalid segment index. */ #define VERR_DBG_INVALID_SEGMENT_INDEX (-653) /** Invalid segment offset. */ #define VERR_DBG_INVALID_SEGMENT_OFFSET (-654) /** Invalid image relative virtual address. */ #define VERR_DBG_INVALID_RVA (-655) /** Invalid image relative virtual address. */ #define VERR_DBG_SPECIAL_SEGMENT (-656) /** Address conflict within a module/segment. * Attempted to add a segment, symbol or line number that fully or partially * overlaps with an existing one. */ #define VERR_DBG_ADDRESS_CONFLICT (-657) /** Duplicate symbol within the module. * Attempted to add a symbol which name already exists within the module. */ #define VERR_DBG_DUPLICATE_SYMBOL (-658) /** The segment index specified when adding a new segment is already in use. */ #define VERR_DBG_SEGMENT_INDEX_CONFLICT (-659) /** No line number was found for the specified address/ordinal/whatever. */ #define VERR_DBG_LINE_NOT_FOUND (-660) /** The length of the symbol name is out of range. * This means it is an empty string or that it's greater or equal to * RTDBG_SYMBOL_NAME_LENGTH. */ #define VERR_DBG_SYMBOL_NAME_OUT_OF_RANGE (-661) /** The length of the file name is out of range. * This means it is an empty string or that it's greater or equal to * RTDBG_FILE_NAME_LENGTH. */ #define VERR_DBG_FILE_NAME_OUT_OF_RANGE (-662) /** The length of the segment name is out of range. * This means it is an empty string or that it is greater or equal to * RTDBG_SEGMENT_NAME_LENGTH. */ #define VERR_DBG_SEGMENT_NAME_OUT_OF_RANGE (-663) /** The specified address range wraps around. */ #define VERR_DBG_ADDRESS_WRAP (-664) /** The file is not a valid NM map file. */ #define VERR_DBG_NOT_NM_MAP_FILE (-665) /** The file is not a valid /proc/kallsyms file. */ #define VERR_DBG_NOT_LINUX_KALLSYMS (-666) /** No debug module interpreter matching the debug info. */ #define VERR_DBG_NO_MATCHING_INTERPRETER (-667) /** Bad DWARF line number header. */ #define VERR_DWARF_BAD_LINE_NUMBER_HEADER (-668) /** Unexpected end of DWARF unit. */ #define VERR_DWARF_UNEXPECTED_END (-669) /** DWARF LEB value overflows the decoder type. */ #define VERR_DWARF_LEB_OVERFLOW (-670) /** Bad DWARF extended line number opcode. */ #define VERR_DWARF_BAD_LNE (-671) /** Bad DWARF string. */ #define VERR_DWARF_BAD_STRING (-672) /** Bad DWARF position. */ #define VERR_DWARF_BAD_POS (-673) /** Bad DWARF info. */ #define VERR_DWARF_BAD_INFO (-674) /** Bad DWARF abbreviation data. */ #define VERR_DWARF_BAD_ABBREV (-675) /** A DWARF abbreviation was not found. */ #define VERR_DWARF_ABBREV_NOT_FOUND (-676) /** Encountered an unknown attribute form. */ #define VERR_DWARF_UNKNOWN_FORM (-677) /** Encountered an unexpected attribute form. */ #define VERR_DWARF_UNEXPECTED_FORM (-678) /** @} */ /** @name Request Packet Status Codes. * @{ */ /** Invalid RT request type. * For the RTReqAlloc() case, the caller just specified an illegal enmType. For * all the other occurrences it means indicates corruption, broken logic, or stupid * interface user. */ #define VERR_RT_REQUEST_INVALID_TYPE (-700) /** Invalid RT request state. * The state of the request packet was not the expected and accepted one(s). Either * the interface user screwed up, or we've got corruption/broken logic. */ #define VERR_RT_REQUEST_STATE (-701) /** Invalid RT request packet. * One or more of the RT controlled packet members didn't contain the correct * values. Some thing's broken. */ #define VERR_RT_REQUEST_INVALID_PACKAGE (-702) /** The status field has not been updated yet as the request is still * pending completion. Someone queried the iStatus field before the request * has been fully processed. */ #define VERR_RT_REQUEST_STATUS_STILL_PENDING (-703) /** The request has been freed, don't read the status now. * Someone is reading the iStatus field of a freed request packet. */ #define VERR_RT_REQUEST_STATUS_FREED (-704) /** @} */ /** @name Environment Status Code * @{ */ /** The specified environment variable was not found. (RTEnvGetEx) */ #define VERR_ENV_VAR_NOT_FOUND (-750) /** The specified environment variable was not found. (RTEnvUnsetEx) */ #define VINF_ENV_VAR_NOT_FOUND (750) /** @} */ /** @name Multiprocessor Status Codes. * @{ */ /** The specified cpu is offline. */ #define VERR_CPU_OFFLINE (-800) /** The specified cpu was not found. */ #define VERR_CPU_NOT_FOUND (-801) /** @} */ /** @name RTGetOpt status codes * @{ */ /** RTGetOpt: Command line option not recognized. */ #define VERR_GETOPT_UNKNOWN_OPTION (-825) /** RTGetOpt: Command line option needs argument. */ #define VERR_GETOPT_REQUIRED_ARGUMENT_MISSING (-826) /** RTGetOpt: Command line option has argument with bad format. */ #define VERR_GETOPT_INVALID_ARGUMENT_FORMAT (-827) /** RTGetOpt: Not an option. */ #define VINF_GETOPT_NOT_OPTION 828 /** RTGetOpt: Command line option needs an index. */ #define VERR_GETOPT_INDEX_MISSING (-829) /** @} */ /** @name RTCache status codes * @{ */ /** RTCache: cache is full. */ #define VERR_CACHE_FULL (-850) /** RTCache: cache is empty. */ #define VERR_CACHE_EMPTY (-851) /** @} */ /** @name RTMemCache status codes * @{ */ /** Reached the max cache size. */ #define VERR_MEM_CACHE_MAX_SIZE (-855) /** @} */ /** @name RTS3 status codes * @{ */ /** Access denied error. */ #define VERR_S3_ACCESS_DENIED (-875) /** The bucket/key wasn't found. */ #define VERR_S3_NOT_FOUND (-876) /** Bucket already exists. */ #define VERR_S3_BUCKET_ALREADY_EXISTS (-877) /** Can't delete bucket with keys. */ #define VERR_S3_BUCKET_NOT_EMPTY (-878) /** The current operation was canceled. */ #define VERR_S3_CANCELED (-879) /** @} */ /** @name RTManifest status codes * @{ */ /** A digest type used in the manifest file isn't supported. */ #define VERR_MANIFEST_UNSUPPORTED_DIGEST_TYPE (-900) /** An entry in the manifest file couldn't be interpreted correctly. */ #define VERR_MANIFEST_WRONG_FILE_FORMAT (-901) /** A digest doesn't match the corresponding file. */ #define VERR_MANIFEST_DIGEST_MISMATCH (-902) /** The file list doesn't match to the content of the manifest file. */ #define VERR_MANIFEST_FILE_MISMATCH (-903) /** The specified attribute (name) was not found in the manifest. */ #define VERR_MANIFEST_ATTR_NOT_FOUND (-904) /** The attribute type did not match. */ #define VERR_MANIFEST_ATTR_TYPE_MISMATCH (-905) /** No attribute of the specified types was found. */ #define VERR_MANIFEST_ATTR_TYPE_NOT_FOUND (-906) /** @} */ /** @name RTTar status codes * @{ */ /** The checksum of a tar header record doesn't match. */ #define VERR_TAR_CHKSUM_MISMATCH (-925) /** The tar end of file record was read. */ #define VERR_TAR_END_OF_FILE (-926) /** The tar file ended unexpectedly. */ #define VERR_TAR_UNEXPECTED_EOS (-927) /** The tar termination records was encountered without reaching the end of * the input stream. */ #define VERR_TAR_EOS_MORE_INPUT (-928) /** A number tar header field was malformed. */ #define VERR_TAR_BAD_NUM_FIELD (-929) /** A numeric tar header field was not terminated correctly. */ #define VERR_TAR_BAD_NUM_FIELD_TERM (-930) /** A number tar header field was encoded using base-256 which this * tar implementation currently does not support. */ #define VERR_TAR_BASE_256_NOT_SUPPORTED (-931) /** A number tar header field yielded a value too large for the internal * variable of the tar interpreter. */ #define VERR_TAR_NUM_VALUE_TOO_LARGE (-932) /** The combined minor and major device number type is too small to hold the * value stored in the tar header. */ #define VERR_TAR_DEV_VALUE_TOO_LARGE (-933) /** The mode field in a tar header is bad. */ #define VERR_TAR_BAD_MODE_FIELD (-934) /** The mode field should not include the type. */ #define VERR_TAR_MODE_WITH_TYPE (-935) /** The size field should be zero for links and symlinks. */ #define VERR_TAR_SIZE_NOT_ZERO (-936) /** Encountered an unknown type flag. */ #define VERR_TAR_UNKNOWN_TYPE_FLAG (-937) /** The tar header is all zeros. */ #define VERR_TAR_ZERO_HEADER (-938) /** Not a uniform standard tape v0.0 archive header. */ #define VERR_TAR_NOT_USTAR_V00 (-939) /** The name is empty. */ #define VERR_TAR_EMPTY_NAME (-940) /** A non-directory entry has a name ending with a slash. */ #define VERR_TAR_NON_DIR_ENDS_WITH_SLASH (-941) /** Encountered an unsupported portable archive exchange (pax) header. */ #define VERR_TAR_UNSUPPORTED_PAX_TYPE (-942) /** Encountered an unsupported Solaris Tar extension. */ #define VERR_TAR_UNSUPPORTED_SOLARIS_HDR_TYPE (-943) /** Encountered an unsupported GNU Tar extension. */ #define VERR_TAR_UNSUPPORTED_GNU_HDR_TYPE (-944) /** Malformed checksum field in the tar header. */ #define VERR_TAR_BAD_CHKSUM_FIELD (-945) /** Malformed checksum field in the tar header. */ #define VERR_TAR_MALFORMED_GNU_LONGXXXX (-946) /** Too long name or link string. */ #define VERR_TAR_NAME_TOO_LONG (-947) /** @} */ /** @name RTPoll status codes * @{ */ /** The handle is not pollable. */ #define VERR_POLL_HANDLE_NOT_POLLABLE (-950) /** The handle ID is already present in the poll set. */ #define VERR_POLL_HANDLE_ID_EXISTS (-951) /** The handle ID was not found in the set. */ #define VERR_POLL_HANDLE_ID_NOT_FOUND (-952) /** The poll set is full. */ #define VERR_POLL_SET_IS_FULL (-953) /** @} */ /** @name RTZip status codes * @{ */ /** Generic zip error. */ #define VERR_ZIP_ERROR (-22000) /** The compressed data was corrupted. */ #define VERR_ZIP_CORRUPTED (-22001) /** Ran out of memory while compressing or uncompressing. */ #define VERR_ZIP_NO_MEMORY (-22002) /** The compression format version is unsupported. */ #define VERR_ZIP_UNSUPPORTED_VERSION (-22003) /** The compression method is unsupported. */ #define VERR_ZIP_UNSUPPORTED_METHOD (-22004) /** The compressed data started with a bad header. */ #define VERR_ZIP_BAD_HEADER (-22005) /** @} */ /** @name RTVfs status codes * @{ */ /** The VFS chain specification does not have a valid prefix. */ #define VERR_VFS_CHAIN_NO_PREFIX (-22100) /** The VFS chain specification is empty. */ #define VERR_VFS_CHAIN_EMPTY (-22101) /** Expected an element. */ #define VERR_VFS_CHAIN_EXPECTED_ELEMENT (-22102) /** The VFS object type is not known. */ #define VERR_VFS_CHAIN_UNKNOWN_TYPE (-22103) /** Expected a left paranthese. */ #define VERR_VFS_CHAIN_EXPECTED_LEFT_PARENTHESES (-22104) /** Expected a right paranthese. */ #define VERR_VFS_CHAIN_EXPECTED_RIGHT_PARENTHESES (-22105) /** Expected a provider name. */ #define VERR_VFS_CHAIN_EXPECTED_PROVIDER_NAME (-22106) /** Expected an action (> or |). */ #define VERR_VFS_CHAIN_EXPECTED_ACTION (-22107) /** Only one action element is currently supported. */ #define VERR_VFS_CHAIN_MULTIPLE_ACTIONS (-22108) /** Expected to find a driving action (>), but there is none. */ #define VERR_VFS_CHAIN_NO_ACTION (-22109) /** Expected pipe action. */ #define VERR_VFS_CHAIN_EXPECTED_PIPE (-22110) /** Unexpected action type. */ #define VERR_VFS_CHAIN_UNEXPECTED_ACTION_TYPE (-22111) /** @} */ /** @name RTDvm status codes * @{ */ /** The volume map doesn't contain any valid volume. */ #define VERR_DVM_MAP_EMPTY (-22200) /** There is no volume behind the current one. */ #define VERR_DVM_MAP_NO_VOLUME (-22201) /** @} */ /** @name Logger status codes * @{ */ /** The internal logger revision did not match. */ #define VERR_LOG_REVISION_MISMATCH (-22300) /** @} */ /* see above, 22400..22499 is used for misc codes! */ /** @name Logger status codes * @{ */ /** Power off is not supported by the hardware or the OS. */ #define VERR_SYS_CANNOT_POWER_OFF (-22500) /** The halt action was requested, but the OS may actually power * off the machine. */ #define VINF_SYS_MAY_POWER_OFF (22501) /** Shutdown failed. */ #define VERR_SYS_SHUTDOWN_FAILED (-22502) /** @} */ /** @name Filesystem status codes * @{ */ /** Filesystem can't be opened because it is corrupt. */ #define VERR_FILESYSTEM_CORRUPT (-22600) /** @} */ /* SED-END */ /** @} */ #endif