/** @file * IPRT - File I/O. */ /* * Copyright (C) 2006-2007 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ #ifndef ___iprt_file_h #define ___iprt_file_h #include #include #ifdef IN_RING3 # include #endif /** @todo rename this file to iprt/file.h */ __BEGIN_DECLS /** @defgroup grp_rt_fileio RTFile - File I/O * @ingroup grp_rt * @{ */ /** Platform specific text line break. * @deprecated Use text I/O streams and '\\n'. See iprt/stream.h. */ #if defined(RT_OS_OS2) || defined(RT_OS_WINDOWS) # define RTFILE_LINEFEED "\r\n" #else # define RTFILE_LINEFEED "\n" #endif #ifdef IN_RING3 /** @name Open flags * @{ */ /** Open the file with read access. */ #define RTFILE_O_READ 0x00000001 /** Open the file with write access. */ #define RTFILE_O_WRITE 0x00000002 /** Open the file with read & write access. */ #define RTFILE_O_READWRITE 0x00000003 /** The file access mask. * @remark The value 0 is invalid. */ #define RTFILE_O_ACCESS_MASK 0x00000003 /** Sharing mode: deny none (the default mode). */ #define RTFILE_O_DENY_NONE 0x00000000 /** Sharing mode: deny read. */ #define RTFILE_O_DENY_READ 0x00000010 /** Sharing mode: deny write. */ #define RTFILE_O_DENY_WRITE 0x00000020 /** Sharing mode: deny read and write. */ #define RTFILE_O_DENY_READWRITE 0x00000030 /** Sharing mode: deny all. */ #define RTFILE_O_DENY_ALL RTFILE_O_DENY_READWRITE /** Sharing mode: do NOT deny delete (NT). * @remark This might not be implemented on all platforms, * and will be defaulted & ignored on those. */ #define RTFILE_O_DENY_NOT_DELETE 0x00000040 /** Sharing mode mask. */ #define RTFILE_O_DENY_MASK 0x00000070 /** Action: Open an existing file (the default action). */ #define RTFILE_O_OPEN 0x00000000 /** Action: Create a new file or open an existing one. */ #define RTFILE_O_OPEN_CREATE 0x00000100 /** Action: Create a new a file. */ #define RTFILE_O_CREATE 0x00000200 /** Action: Create a new file or replace an existing one. */ #define RTFILE_O_CREATE_REPLACE 0x00000300 /** Action mask. */ #define RTFILE_O_ACTION_MASK 0x00000300 /** Turns off indexing of files on Windows hosts, *CREATE* only. * @remark This might not be implemented on all platforms, * and will be ignored on those. */ #define RTFILE_O_NOT_CONTENT_INDEXED 0x00000800 /** Truncate the file. * @remark This will not truncate files opened for read-only. * @remark The trunction doesn't have to be atomically, so anyone * else opening the file may be racing us. The caller is * responsible for not causing this race. */ #define RTFILE_O_TRUNCATE 0x00001000 /** Make the handle inheritable on RTProcessCreate(/exec). */ #define RTFILE_O_INHERIT 0x00002000 /** Open file in non-blocking mode - non-portable. * @remark This flag may not be supported on all platforms, in which * case it's considered an invalid parameter. */ #define RTFILE_O_NON_BLOCK 0x00004000 /** Write through directly to disk. Workaround to avoid iSCSI * initiator deadlocks on Windows hosts. * @remark This might not be implemented on all platforms, * and will be ignored on those. */ #define RTFILE_O_WRITE_THROUGH 0x00008000 /** Unix file mode mask for use when creating files. */ #define RTFILE_O_CREATE_MODE_MASK 0x1ff00000 /** The number of bits to shift to get the file mode mask. * To extract it: (fFlags & RTFILE_O_CREATE_MODE_MASK) >> RTFILE_O_CREATE_MODE_SHIFT. */ #define RTFILE_O_CREATE_MODE_SHIFT 20 /** Mask of all valid flags. * @remark This doesn't validate the access mode properly. */ #define RTFILE_O_VALID_MASK 0x1ff0FB73 /** @} */ /** * Force the use of open flags for all files opened after the setting is * changed. The caller is responsible for not causing races with RTFileOpen(). * * @returns iprt status code. * @param fOpenForAccess Access mode to which the set/mask settings apply. * @param fSet Open flags to be forced set. * @param fMask Open flags to be masked out. */ RTR3DECL(int) RTFileSetForceFlags(unsigned fOpenForAccess, unsigned fSet, unsigned fMask); /** * Open a file. * * @returns iprt status code. * @param pFile Where to store the handle to the opened file. * @param pszFilename Path to the file which is to be opened. (UTF-8) * @param fOpen Open flags, i.e a combination of the RTFILE_O_* defines. */ RTR3DECL(int) RTFileOpen(PRTFILE pFile, const char *pszFilename, unsigned fOpen); /** * Close a file opened by RTFileOpen(). * * @returns iprt status code. * @param File The file handle to close. */ RTR3DECL(int) RTFileClose(RTFILE File); /** * Creates an IPRT file handle from a native one. * * @returns IPRT status code. * @param pFile Where to store the IPRT file handle. * @param uNative The native handle. */ RTR3DECL(int) RTFileFromNative(PRTFILE pFile, RTHCINTPTR uNative); /** * Gets the native handle for an IPRT file handle. * * @return The native handle. * @params File The IPRT file handle. */ RTR3DECL(RTHCINTPTR) RTFileToNative(RTFILE File); /** * Delete a file. * * @returns iprt status code. * @param pszFilename Path to the file which is to be deleted. (UTF-8) * @todo This is a RTPath api! */ RTR3DECL(int) RTFileDelete(const char *pszFilename); /** @name Seek flags. * @{ */ /** Seek from the start of the file. */ #define RTFILE_SEEK_BEGIN 0x00 /** Seek from the current file position. */ #define RTFILE_SEEK_CURRENT 0x01 /** Seek from the end of the file. */ #define RTFILE_SEEK_END 0x02 /** @internal */ #define RTFILE_SEEK_FIRST RTFILE_SEEK_BEGIN /** @internal */ #define RTFILE_SEEK_LAST RTFILE_SEEK_END /** @} */ /** * Changes the read & write position in a file. * * @returns iprt status code. * @param File Handle to the file. * @param offSeek Offset to seek. * @param uMethod Seek method, i.e. one of the RTFILE_SEEK_* defines. * @param poffActual Where to store the new file position. * NULL is allowed. */ RTR3DECL(int) RTFileSeek(RTFILE File, int64_t offSeek, unsigned uMethod, uint64_t *poffActual); /** * Read bytes from a file. * * @returns iprt status code. * @param File Handle to the file. * @param pvBuf Where to put the bytes we read. * @param cbToRead How much to read. * @param *pcbRead How much we actually read . * If NULL an error will be returned for a partial read. */ RTR3DECL(int) RTFileRead(RTFILE File, void *pvBuf, size_t cbToRead, size_t *pcbRead); /** * Read bytes from a file at a given offset. * This function may modify the file position. * * @returns iprt status code. * @param File Handle to the file. * @param off Where to read. * @param pvBuf Where to put the bytes we read. * @param cbToRead How much to read. * @param *pcbRead How much we actually read . * If NULL an error will be returned for a partial read. */ RTR3DECL(int) RTFileReadAt(RTFILE File, RTFOFF off, void *pvBuf, size_t cbToRead, size_t *pcbRead); /** * Write bytes to a file. * * @returns iprt status code. * @param File Handle to the file. * @param pvBuf What to write. * @param cbToWrite How much to write. * @param *pcbWritten How much we actually wrote. * If NULL an error will be returned for a partial write. */ RTR3DECL(int) RTFileWrite(RTFILE File, const void *pvBuf, size_t cbToWrite, size_t *pcbWritten); /** * Write bytes to a file at a given offset. * This function may modify the file position. * * @returns iprt status code. * @param File Handle to the file. * @param off Where to write. * @param pvBuf What to write. * @param cbToWrite How much to write. * @param *pcbWritten How much we actually wrote. * If NULL an error will be returned for a partial write. */ RTR3DECL(int) RTFileWriteAt(RTFILE File, RTFOFF off, const void *pvBuf, size_t cbToWrite, size_t *pcbWritten); /** * Flushes the buffers for the specified file. * * @returns iprt status code. * @param File Handle to the file. */ RTR3DECL(int) RTFileFlush(RTFILE File); /** * Set the size of the file. * * @returns iprt status code. * @param File Handle to the file. * @param cbSize The new file size. */ RTR3DECL(int) RTFileSetSize(RTFILE File, uint64_t cbSize); /** * Query the size of the file. * * @returns iprt status code. * @param File Handle to the file. * @param pcbSize Where to store the filesize. */ RTR3DECL(int) RTFileGetSize(RTFILE File, uint64_t *pcbSize); /** * Determine the maximum file size. * * @returns The max size of the file. * -1 on failure, the file position is undefined. * @param File Handle to the file. * @see RTFileGetMaxSizeEx. */ RTR3DECL(RTFOFF) RTFileGetMaxSize(RTFILE File); /** * Determine the maximum file size. * * @returns IPRT status code. * @param File Handle to the file. * @param pcbMax Where to store the max file size. * @see RTFileGetMaxSize. */ RTR3DECL(int) RTFileGetMaxSizeEx(RTFILE File, PRTFOFF pcbMax); /** * Determine the maximum file size depending on the file system the file is stored on. * * @returns The max size of the file. * -1 on failure. * @param File Handle to the file. */ RTR3DECL(RTFOFF) RTFileGetMaxSize(RTFILE File); /** * Gets the current file position. * * @returns File offset. * @returns ~0UUL on failure. * @param File Handle to the file. */ RTDECL(uint64_t) RTFileTell(RTFILE File); /** * Checks if the supplied handle is valid. * * @returns true if valid. * @returns false if invalid. * @param File The file handle */ RTR3DECL(bool) RTFileIsValid(RTFILE File); /** * Copies a file. * * @returns VERR_ALREADY_EXISTS if the destination file exists. * @returns VBox Status code. * * @param pszSrc The path to the source file. * @param pszDst The path to the destination file. * This file will be created. */ RTDECL(int) RTFileCopy(const char *pszSrc, const char *pszDst); /** * Copies a file given the handles to both files. * * @returns VBox Status code. * * @param FileSrc The source file. The file position is unaltered. * @param FileDst The destination file. * On successful returns the file position is at the end of the file. * On failures the file position and size is undefined. */ RTDECL(int) RTFileCopyByHandles(RTFILE FileSrc, RTFILE FileDst); /** Flags for RTFileCopyEx(). * @{ */ /** Do not use RTFILE_O_DENY_WRITE on the source file to allow for copying files opened for writing. */ #define RTFILECOPY_FLAGS_NO_SRC_DENY_WRITE RT_BIT(0) /** Do not use RTFILE_O_DENY_WRITE on the target file. */ #define RTFILECOPY_FLAGS_NO_DST_DENY_WRITE RT_BIT(1) /** Do not use RTFILE_O_DENY_WRITE on either of the two files. */ #define RTFILECOPY_FLAGS_NO_DENY_WRITE ( RTFILECOPY_FLAGS_NO_SRC_DENY_WRITE | RTFILECOPY_FLAGS_NO_DST_DENY_WRITE ) /** */ #define RTFILECOPY_FLAGS_MASK UINT32_C(0x00000003) /** @} */ /** * Copies a file. * * @returns VERR_ALREADY_EXISTS if the destination file exists. * @returns VBox Status code. * * @param pszSrc The path to the source file. * @param pszDst The path to the destination file. * This file will be created. * @param fFlags Flags (RTFILECOPY_*). * @param pfnProgress Pointer to callback function for reporting progress. * @param pvUser User argument to pass to pfnProgress along with the completion precentage. */ RTDECL(int) RTFileCopyEx(const char *pszSrc, const char *pszDst, uint32_t fFlags, PFNRTPROGRESS pfnProgress, void *pvUser); /** * Copies a file given the handles to both files and * provide progress callbacks. * * @returns IPRT status code. * * @param FileSrc The source file. The file position is unaltered. * @param FileDst The destination file. * On successful returns the file position is at the end of the file. * On failures the file position and size is undefined. * @param pfnProgress Pointer to callback function for reporting progress. * @param pvUser User argument to pass to pfnProgress along with the completion precentage. */ RTDECL(int) RTFileCopyByHandlesEx(RTFILE FileSrc, RTFILE FileDst, PFNRTPROGRESS pfnProgress, void *pvUser); /** * Renames a file. * * Identical to RTPathRename except that it will ensure that the source is not a directory. * * @returns IPRT status code. * @returns VERR_ALREADY_EXISTS if the destination file exists. * * @param pszSrc The path to the source file. * @param pszDst The path to the destination file. * This file will be created. * @param fRename See RTPathRename. */ RTDECL(int) RTFileRename(const char *pszSrc, const char *pszDst, unsigned fRename); /** @name RTFileMove flags (bit masks). * @{ */ /** Replace destination file if present. */ #define RTFILEMOVE_FLAGS_REPLACE 0x1 /** @} */ /** * Moves a file. * * RTFileMove differs from RTFileRename in that it works across volumes. * * @returns IPRT status code. * @returns VERR_ALREADY_EXISTS if the destination file exists. * * @param pszSrc The path to the source file. * @param pszDst The path to the destination file. * This file will be created. * @param fMove A combination of the RTFILEMOVE_* flags. */ RTDECL(int) RTFileMove(const char *pszSrc, const char *pszDst, unsigned fMove); /** @page pg_rt_filelock RT File locking API description * * File locking general rules: * * Region to lock or unlock can be located beyond the end of file, this can be used for * growing files. * Read (or Shared) locks can be acquired held by an unlimited number of processes at the * same time, but a Write (or Exclusive) lock can only be acquired by one process, and * cannot coexist with a Shared lock. To acquire a Read lock, a process must wait until * there are no processes holding any Write locks. To acquire a Write lock, a process must * wait until there are no processes holding either kind of lock. * By default, RTFileLock and RTFileChangeLock calls returns error immediately if the lock * can't be acquired due to conflict with other locks, however they can be called in wait mode. * * Differences in implementation: * * Win32, OS/2: Locking is mandatory, since locks are enforced by the operating system. * I.e. when file region is locked in Read mode, any write in it will fail; in case of Write * lock - region can be readed and writed only by lock's owner. * * Win32: File size change (RTFileSetSize) is not controlled by locking at all (!) in the * operation system. Also see comments to RTFileChangeLock API call. * * Linux/Posix: By default locks in Unixes are advisory. This means that cooperating processes * may use locks to coordonate access to a file between themselves, but programs are also free * to ignore locks and access the file in any way they choose to. * * Additional reading: * http://en.wikipedia.org/wiki/File_locking * http://unixhelp.ed.ac.uk/CGI/man-cgi?fcntl+2 * http://msdn.microsoft.com/library/default.asp?url=/library/en-us/fileio/fs/lockfileex.asp */ /** @name Lock flags (bit masks). * @{ */ /** Read access, can be shared with others. */ #define RTFILE_LOCK_READ 0x00 /** Write access, one at a time. */ #define RTFILE_LOCK_WRITE 0x01 /** Don't wait for other locks to be released. */ #define RTFILE_LOCK_IMMEDIATELY 0x00 /** Wait till conflicting locks have been released. */ #define RTFILE_LOCK_WAIT 0x02 /** Valid flags mask */ #define RTFILE_LOCK_MASK 0x03 /** @} */ /** * Locks a region of file for read (shared) or write (exclusive) access. * * @returns iprt status code. * @returns VERR_FILE_LOCK_VIOLATION if lock can't be acquired. * @param File Handle to the file. * @param fLock Lock method and flags, see RTFILE_LOCK_* defines. * @param offLock Offset of lock start. * @param cbLock Length of region to lock, may overlap the end of file. */ RTR3DECL(int) RTFileLock(RTFILE File, unsigned fLock, int64_t offLock, uint64_t cbLock); /** * Changes a lock type from read to write or from write to read. * The region to type change must correspond exactly to an existing locked region. * If change can't be done due to locking conflict and non-blocking mode is used, error is * returned and lock keeps its state (see next warning). * * WARNING: win32 implementation of this call is not atomic, it transforms to a pair of * calls RTFileUnlock and RTFileLock. Potentially the previously acquired lock can be * lost, i.e. function is called in non-blocking mode, previous lock is freed, new lock can't * be acquired, and old lock (previous state) can't be acquired back too. This situation * may occurs _only_ if the other process is acquiring a _write_ lock in blocking mode or * in race condition with the current call. * In this very bad case special error code VERR_FILE_LOCK_LOST will be returned. * * @returns iprt status code. * @returns VERR_FILE_NOT_LOCKED if region was not locked. * @returns VERR_FILE_LOCK_VIOLATION if lock type can't be changed, lock remains its type. * @returns VERR_FILE_LOCK_LOST if lock was lost, we haven't this lock anymore :( * @param File Handle to the file. * @param fLock Lock method and flags, see RTFILE_LOCK_* defines. * @param offLock Offset of lock start. * @param cbLock Length of region to lock, may overlap the end of file. */ RTR3DECL(int) RTFileChangeLock(RTFILE File, unsigned fLock, int64_t offLock, uint64_t cbLock); /** * Unlocks previously locked region of file. * The region to unlock must correspond exactly to an existing locked region. * * @returns iprt status code. * @returns VERR_FILE_NOT_LOCKED if region was not locked. * @param File Handle to the file. * @param offLock Offset of lock start. * @param cbLock Length of region to unlock, may overlap the end of file. */ RTR3DECL(int) RTFileUnlock(RTFILE File, int64_t offLock, uint64_t cbLock); /** * Query information about an open file. * * @returns iprt status code. * * @param File Handle to the file. * @param pObjInfo Object information structure to be filled on successful return. * @param enmAdditionalAttribs Which set of additional attributes to request. * Use RTFSOBJATTRADD_NOTHING if this doesn't matter. */ RTR3DECL(int) RTFileQueryInfo(RTFILE File, PRTFSOBJINFO pObjInfo, RTFSOBJATTRADD enmAdditionalAttribs); /** * Changes one or more of the timestamps associated of file system object. * * @returns iprt status code. * @returns VERR_NOT_SUPPORTED is returned if the operation isn't supported by the OS. * * @param File Handle to the file. * @param pAccessTime Pointer to the new access time. NULL if not to be changed. * @param pModificationTime Pointer to the new modifcation time. NULL if not to be changed. * @param pChangeTime Pointer to the new change time. NULL if not to be changed. * @param pBirthTime Pointer to the new time of birth. NULL if not to be changed. * * @remark The file system might not implement all these time attributes, * the API will ignore the ones which aren't supported. * * @remark The file system might not implement the time resolution * employed by this interface, the time will be chopped to fit. * * @remark The file system may update the change time even if it's * not specified. * * @remark POSIX can only set Access & Modification and will always set both. */ RTR3DECL(int) RTFileSetTimes(RTFILE File, PCRTTIMESPEC pAccessTime, PCRTTIMESPEC pModificationTime, PCRTTIMESPEC pChangeTime, PCRTTIMESPEC pBirthTime); /** * Gets one or more of the timestamps associated of file system object. * * @returns iprt status code. * @param File Handle to the file. * @param pAccessTime Where to store the access time. NULL is ok. * @param pModificationTime Where to store the modifcation time. NULL is ok. * @param pChangeTime Where to store the change time. NULL is ok. * @param pBirthTime Where to store the time of birth. NULL is ok. * * @remark This is wrapper around RTFileQueryInfo() and exists to complement RTFileSetTimes(). */ RTR3DECL(int) RTFileGetTimes(RTFILE File, PRTTIMESPEC pAccessTime, PRTTIMESPEC pModificationTime, PRTTIMESPEC pChangeTime, PRTTIMESPEC pBirthTime); /** * Changes the mode flags of an open file. * * The API requires at least one of the mode flag sets (Unix/Dos) to * be set. The type is ignored. * * @returns iprt status code. * @param File Handle to the file. * @param fMode The new file mode, see @ref grp_rt_fs for details. */ RTR3DECL(int) RTFileSetMode(RTFILE File, RTFMODE fMode); /** * Gets the mode flags of an open file. * * @returns iprt status code. * @param File Handle to the file. * @param pfMode Where to store the file mode, see @ref grp_rt_fs for details. * * @remark This is wrapper around RTFileQueryInfo() * and exists to complement RTFileSetMode(). */ RTR3DECL(int) RTFileGetMode(RTFILE File, uint32_t *pfMode); /** * Changes the owner and/or group of an open file. * * @returns iprt status code. * @param File Handle to the file. * @param uid The new file owner user id. Use -1 (or ~0) to leave this unchanged. * @param gid The new group id. Use -1 (or ~0) to leave this unchanged. */ RTR3DECL(int) RTFileSetOwner(RTFILE File, uint32_t uid, uint32_t gid); /** * Gets the owner and/or group of an open file. * * @returns iprt status code. * @param File Handle to the file. * @param pUid Where to store the owner user id. NULL is ok. * @param pGid Where to store the group id. NULL is ok. * * @remark This is wrapper around RTFileQueryInfo() and exists to complement RTFileGetOwner(). */ RTR3DECL(int) RTFileGetOwner(RTFILE File, uint32_t *pUid, uint32_t *pGid); /** * Executes an IOCTL on a file descriptor. * * This function is currently only available in L4 and posix environments. * Attemps at calling it from code shared with any other platforms will break things! * * The rational for defining this API is to simplify L4 porting of audio drivers, * and to remove some of the assumptions on RTFILE being a file descriptor on * platforms using the posix file implementation. * * @returns iprt status code. * @param File Handle to the file. * @param iRequest IOCTL request to carry out. * @param pvData IOCTL data. * @param cbData Size of the IOCTL data. * @param piRet Return value of the IOCTL request. */ RTR3DECL(int) RTFileIoCtl(RTFILE File, int iRequest, void *pvData, unsigned cbData, int *piRet); /** * Reads the file into memory. * * The caller must free the memory using RTFileReadAllFree(). * * @returns IPRT status code. * @param pszFilename The name of the file. * @param ppvFile Where to store the pointer to the memory on successful return. * @param pcbFile Where to store the size of the file on successful return. * * @remarks Note that this function may be implemented using memory mapping, which means * that the file may remain open until RTFileReadAllFree() is called. It also * means that the return memory may reflect the state of the file when it's * accessed instead of when this call was done. So, in short, don't use this * API for volatile files, then rather use the extended variant with a * yet-to-be-defined. */ RTDECL(int) RTFileReadAll(const char *pszFilename, void **ppvFile, size_t *pcbFile); /** * Reads the file into memory. * * The caller must free the memory using RTFileReadAllFree(). * * @returns IPRT status code. * @param pszFilename The name of the file. * @param off The offset to start reading at. * @param cbMax The maximum number of bytes to read into memory. Specify RTFOFF_MAX * to read to the end of the file. * @param fFlags Flags for the future, must be 0. * @param ppvFile Where to store the pointer to the memory on successful return. * @param pcbFile Where to store the size of the file on successful return. * * @remarks See the remarks for RTFileReadAll. */ RTDECL(int) RTFileReadAllEx(const char *pszFilename, RTFOFF off, RTFOFF cbMax, uint32_t fFlags, void **ppvFile, size_t *pcbFile); /** * Reads the file into memory. * * The caller must free the memory using RTFileReadAllFree(). * * @returns IPRT status code. * @param File The handle to the file. * @param ppvFile Where to store the pointer to the memory on successful return. * @param pcbFile Where to store the size of the file on successful return. * * @remarks See the remarks for RTFileReadAll. */ RTDECL(int) RTFileReadAllByHandle(RTFILE File, void **ppvFile, size_t *pcbFile); /** * Reads the file into memory. * * The caller must free the memory using RTFileReadAllFree(). * * @returns IPRT status code. * @param File The handle to the file. * @param off The offset to start reading at. * @param cbMax The maximum number of bytes to read into memory. Specify RTFOFF_MAX * to read to the end of the file. * @param fFlags Flags for the future, must be 0. * @param ppvFile Where to store the pointer to the memory on successful return. * @param pcbFile Where to store the size of the file on successful return. * * @remarks See the remarks for RTFileReadAll. */ RTDECL(int) RTFileReadAllByHandleEx(RTFILE File, RTFOFF off, RTFOFF cbMax, uint32_t fFlags, void **ppvFile, size_t *pcbFile); /** * Frees the memory returned by one of the RTFileReadAll(), RTFileReadAllEx(), * RTFileReadAllByHandle() and RTFileReadAllByHandleEx() functions. * * @param pvFile Pointer to the memory. * @param cbFile The size of the memory. */ RTDECL(int) RTFileReadAllFree(void **ppvFile, size_t *pcbFile); #endif /* IN_RING3 */ /** @} */ __END_DECLS #endif