/** @file * IPRT - Lock Validator. */ /* * Copyright (C) 2009 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ #ifndef ___iprt_lockvalidator_h #define ___iprt_lockvalidator_h #include #include #include #include #include /** @defgroup grp_rtlockval RTLockValidator - Lock Validator * @ingroup grp_rt * @{ */ RT_C_DECLS_BEGIN /** Pointer to a record union. * @internal */ typedef union RTLOCKVALRECUNION *PRTLOCKVALRECUNION; /** * Source position. */ typedef struct RTLOCKVALSRCPOS { /** The file where the lock was taken. */ R3R0PTRTYPE(const char * volatile) pszFile; /** The function where the lock was taken. */ R3R0PTRTYPE(const char * volatile) pszFunction; /** Some ID indicating where the lock was taken, typically an address. */ RTHCUINTPTR volatile uId; /** The line number in the file. */ uint32_t volatile uLine; #if HC_ARCH_BITS == 64 uint32_t u32Padding; /**< Alignment padding. */ #endif } RTLOCKVALSRCPOS; AssertCompileSize(RTLOCKVALSRCPOS, HC_ARCH_BITS == 32 ? 16 : 32); /* The pointer types are defined in iprt/types.h. */ /** @def RTLOCKVALSRCPOS_INIT * Initializer for a RTLOCKVALSRCPOS variable. * * @param pszFile The file name. Optional (NULL). * @param uLine The line number in that file. Optional (0). * @param pszFunction The function. Optional (NULL). * @param uId Some location ID, normally the return address. * Optional (NULL). */ #if HC_ARCH_BITS == 64 # define RTLOCKVALSRCPOS_INIT(pszFile, uLine, pszFunction, uId) \ { (pszFile), (pszFunction), (uId), (uLine), 0 } #else # define RTLOCKVALSRCPOS_INIT(pszFile, uLine, pszFunction, uId) \ { (pszFile), (pszFunction), (uId), (uLine) } #endif /** @def RTLOCKVALSRCPOS_INIT_DEBUG_API * Initializer for a RTLOCKVALSRCPOS variable in a typicial debug API * variant. Assumes RT_SRC_POS_DECL and RTHCUINTPTR uId as arguments. */ #define RTLOCKVALSRCPOS_INIT_DEBUG_API() \ RTLOCKVALSRCPOS_INIT(pszFile, iLine, pszFunction, uId) /** @def RTLOCKVALSRCPOS_INIT_NORMAL_API * Initializer for a RTLOCKVALSRCPOS variable in a normal API * variant. Assumes iprt/asm.h is included. */ #define RTLOCKVALSRCPOS_INIT_NORMAL_API() \ RTLOCKVALSRCPOS_INIT(__FILE__, __LINE__, __PRETTY_FUNCTION__, (uintptr_t)ASMReturnAddress()) /** @def RTLOCKVALSRCPOS_INIT_POS_NO_ID * Initializer for a RTLOCKVALSRCPOS variable when no @c uId is present. * Assumes iprt/asm.h is included. */ #define RTLOCKVALSRCPOS_INIT_POS_NO_ID() \ RTLOCKVALSRCPOS_INIT(pszFile, iLine, pszFunction, (uintptr_t)ASMReturnAddress()) /** Pointer to a record of one ownership share. */ typedef struct RTLOCKVALRECSHRD *PRTLOCKVALRECSHRD; /** * Lock validator record core. */ typedef struct RTLOCKVALRECORE { /** The magic value indicating the record type. */ uint32_t volatile u32Magic; } RTLOCKVALRECCORE; /** Pointer to a lock validator record core. */ typedef RTLOCKVALRECCORE *PRTLOCKVALRECCORE; /** Pointer to a const lock validator record core. */ typedef RTLOCKVALRECCORE const *PCRTLOCKVALRECCORE; /** * Record recording the exclusive ownership of a lock. * * This is typically part of the per-lock data structure when compiling with * the lock validator. */ typedef struct RTLOCKVALRECEXCL { /** Record core with RTLOCKVALRECEXCL_MAGIC as the magic value. */ RTLOCKVALRECCORE Core; /** Whether it's enabled or not. */ bool fEnabled; /** Reserved. */ bool afReserved[3]; /** Source position where the lock was taken. */ RTLOCKVALSRCPOS SrcPos; /** The current owner thread. */ RTTHREAD volatile hThread; /** Pointer to the lock record below us. Only accessed by the owner. */ R3R0PTRTYPE(PRTLOCKVALRECUNION) pDown; /** Recursion count */ uint32_t cRecursion; /** The lock sub-class. */ uint32_t volatile uSubClass; /** The lock class. */ RTLOCKVALCLASS hClass; /** Pointer to the lock. */ RTHCPTR hLock; /** Pointer to the next sibling record. * This is used to find the read side of a read-write lock. */ R3R0PTRTYPE(PRTLOCKVALRECUNION) pSibling; /** The lock name. * @remarks The bytes beyond 32 are for better size alignment and can be * taken and used for other purposes if it becomes necessary. */ char szName[32 + (HC_ARCH_BITS == 32 ? 12 : 8)]; } RTLOCKVALRECEXCL; AssertCompileSize(RTLOCKVALRECEXCL, HC_ARCH_BITS == 32 ? 0x60 : 0x80); /* The pointer type is defined in iprt/types.h. */ /** * For recording the one ownership share. */ typedef struct RTLOCKVALRECSHRDOWN { /** Record core with RTLOCKVALRECSHRDOWN_MAGIC as the magic value. */ RTLOCKVALRECCORE Core; /** Recursion count */ uint16_t cRecursion; /** Static (true) or dynamic (false) allocated record. */ bool fStaticAlloc; /** Reserved. */ bool fReserved; /** The current owner thread. */ RTTHREAD volatile hThread; /** Pointer to the lock record below us. Only accessed by the owner. */ R3R0PTRTYPE(PRTLOCKVALRECUNION) pDown; /** Pointer back to the shared record. */ R3R0PTRTYPE(PRTLOCKVALRECSHRD) pSharedRec; #if HC_ARCH_BITS == 32 /** Reserved. */ RTHCPTR pvReserved; #endif /** Source position where the lock was taken. */ RTLOCKVALSRCPOS SrcPos; } RTLOCKVALRECSHRDOWN; AssertCompileSize(RTLOCKVALRECSHRDOWN, HC_ARCH_BITS == 32 ? 24 + 16 : 32 + 32); /** Pointer to a RTLOCKVALRECSHRDOWN. */ typedef RTLOCKVALRECSHRDOWN *PRTLOCKVALRECSHRDOWN; /** * Record recording the shared ownership of a lock. * * This is typically part of the per-lock data structure when compiling with * the lock validator. */ typedef struct RTLOCKVALRECSHRD { /** Record core with RTLOCKVALRECSHRD_MAGIC as the magic value. */ RTLOCKVALRECCORE Core; /** The lock sub-class. */ uint32_t volatile uSubClass; /** The lock class. */ RTLOCKVALCLASS hClass; /** Pointer to the lock. */ RTHCPTR hLock; /** Pointer to the next sibling record. * This is used to find the write side of a read-write lock. */ R3R0PTRTYPE(PRTLOCKVALRECUNION) pSibling; /** The number of entries in the table. * Updated before inserting and after removal. */ uint32_t volatile cEntries; /** The index of the last entry (approximately). */ uint32_t volatile iLastEntry; /** The max table size. */ uint32_t volatile cAllocated; /** Set if the table is being reallocated, clear if not. * This is used together with rtLockValidatorSerializeDetectionEnter to make * sure there is exactly one thread doing the reallocation and that nobody is * using the table at that point. */ bool volatile fReallocating; /** Whether it's enabled or not. */ bool fEnabled; /** Set if event semaphore signaller, clear if read-write semaphore. */ bool fSignaller; /** Alignment padding. */ bool fPadding; /** Pointer to a table containing pointers to records of all the owners. */ R3R0PTRTYPE(PRTLOCKVALRECSHRDOWN volatile *) papOwners; /** The lock name. * @remarks The bytes beyond 32 are for better size alignment and can be * taken and used for other purposes if it becomes necessary. */ char szName[32 + (HC_ARCH_BITS == 32 ? 8 : 8)]; } RTLOCKVALRECSHRD; AssertCompileSize(RTLOCKVALRECSHRD, HC_ARCH_BITS == 32 ? 0x50 : 0x60); /** * Makes the two records siblings. * * @returns VINF_SUCCESS on success, VERR_SEM_LV_INVALID_PARAMETER if either of * the records are invalid. * @param pRec1 Record 1. * @param pRec2 Record 2. */ RTDECL(int) RTLockValidatorRecMakeSiblings(PRTLOCKVALRECCORE pRec1, PRTLOCKVALRECCORE pRec2); /** * Initialize a lock validator record. * * Use RTLockValidatorRecExclDelete to deinitialize it. * * @param pRec The record. * @param hClass The class (no reference consumed). If NIL, the * no lock order validation will be performed on * this lock. * @param uSubClass The sub-class. This is used to define lock * order inside the same class. If you don't know, * then pass RTLOCKVAL_SUB_CLASS_NONE. * @param hLock The lock handle. * @param fEnabled Pass @c false to explicitly disable lock * validation, otherwise @c true. * @param pszNameFmt Name format string for the lock validator, * optional (NULL). Max length is 32 bytes. * @param ... Format string arguments. */ RTDECL(void) RTLockValidatorRecExclInit(PRTLOCKVALRECEXCL pRec, RTLOCKVALCLASS hClass, uint32_t uSubClass, void *hLock, bool fEnabled, const char *pszNameFmt, ...); /** * Initialize a lock validator record. * * Use RTLockValidatorRecExclDelete to deinitialize it. * * @param pRec The record. * @param hClass The class (no reference consumed). If NIL, the * no lock order validation will be performed on * this lock. * @param uSubClass The sub-class. This is used to define lock * order inside the same class. If you don't know, * then pass RTLOCKVAL_SUB_CLASS_NONE. * @param hLock The lock handle. * @param fEnabled Pass @c false to explicitly disable lock * validation, otherwise @c true. * @param pszNameFmt Name format string for the lock validator, * optional (NULL). Max length is 32 bytes. * @param va Format string arguments. */ RTDECL(void) RTLockValidatorRecExclInitV(PRTLOCKVALRECEXCL pRec, RTLOCKVALCLASS hClass, uint32_t uSubClass, void *hLock, bool fEnabled, const char *pszNameFmt, va_list va); /** * Uninitialize a lock validator record previously initialized by * RTLockRecValidatorInit. * * @param pRec The record. Must be valid. */ RTDECL(void) RTLockValidatorRecExclDelete(PRTLOCKVALRECEXCL pRec); /** * Create and initialize a lock validator record. * * Use RTLockValidatorRecExclDestroy to deinitialize and destroy the returned * record. * * @return VINF_SUCCESS or VERR_NO_MEMORY. * @param ppRec Where to return the record pointer. * @param hClass The class (no reference consumed). If NIL, the * no lock order validation will be performed on * this lock. * @param uSubClass The sub-class. This is used to define lock * order inside the same class. If you don't know, * then pass RTLOCKVAL_SUB_CLASS_NONE. * @param hLock The lock handle. * @param fEnabled Pass @c false to explicitly disable lock * validation, otherwise @c true. * @param pszNameFmt Name format string for the lock validator, * optional (NULL). Max length is 32 bytes. * @param ... Format string arguments. */ RTDECL(int) RTLockValidatorRecExclCreate(PRTLOCKVALRECEXCL *ppRec, RTLOCKVALCLASS hClass, uint32_t uSubClass, void *hLock, bool fEnabled, const char *pszNameFmt, ...); /** * Create and initialize a lock validator record. * * Use RTLockValidatorRecExclDestroy to deinitialize and destroy the returned * record. * * @return VINF_SUCCESS or VERR_NO_MEMORY. * @param ppRec Where to return the record pointer. * @param hClass The class (no reference consumed). If NIL, the * no lock order validation will be performed on * this lock. * @param uSubClass The sub-class. This is used to define lock * order inside the same class. If you don't know, * then pass RTLOCKVAL_SUB_CLASS_NONE. * @param hLock The lock handle. * @param fEnabled Pass @c false to explicitly disable lock * validation, otherwise @c true. * @param pszNameFmt Name format string for the lock validator, * optional (NULL). Max length is 32 bytes. * @param va Format string arguments. */ RTDECL(int) RTLockValidatorRecExclCreateV(PRTLOCKVALRECEXCL *ppRec, RTLOCKVALCLASS hClass, uint32_t uSubClass, void *hLock, bool fEnabled, const char *pszNameFmt, va_list va); /** * Deinitialize and destroy a record created by RTLockValidatorRecExclCreate. * * @param ppRec Pointer to the record pointer. Will be set to * NULL. */ RTDECL(void) RTLockValidatorRecExclDestroy(PRTLOCKVALRECEXCL *ppRec); /** * Sets the sub-class of the record. * * It is recommended to try make sure that nobody is using this class while * changing the value. * * @returns The old sub-class. RTLOCKVAL_SUB_CLASS_INVALID is returns if the * lock validator isn't compiled in or either of the parameters are * invalid. * @param pRec The validator record. * @param uSubClass The new sub-class value. */ RTDECL(uint32_t) RTLockValidatorRecExclSetSubClass(PRTLOCKVALRECEXCL pRec, uint32_t uSubClass); /** * Record the specified thread as lock owner and increment the write lock count. * * This function is typically called after acquiring the lock. It accounts for * recursions so it can be used instead of RTLockValidatorRecExclRecursion. Use * RTLockValidatorRecExclReleaseOwner to reverse the effect. * * @param pRec The validator record. * @param hThreadSelf The handle of the calling thread. If not known, * pass NIL_RTTHREAD and we'll figure it out. * @param pSrcPos The source position of the lock operation. * @param fFirstRecursion Set if it is the first recursion, clear if not * sure. */ RTDECL(void) RTLockValidatorRecExclSetOwner(PRTLOCKVALRECEXCL pRec, RTTHREAD hThreadSelf, PCRTLOCKVALSRCPOS pSrcPos, bool fFirstRecursion); /** * Check the exit order and release (unset) the ownership. * * This is called by routines implementing releasing an exclusive lock, * typically before getting down to the final lock releaseing. Can be used for * recursive releasing instead of RTLockValidatorRecExclUnwind. * * @retval VINF_SUCCESS on success. * @retval VERR_SEM_LV_WRONG_RELEASE_ORDER if the order is wrong. Will have * done all necessary whining and breakpointing before returning. * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record. * @param fFinalRecursion Set if it's the final recursion, clear if not * sure. */ RTDECL(int) RTLockValidatorRecExclReleaseOwner(PRTLOCKVALRECEXCL pRec, bool fFinalRecursion); /** * Clear the lock ownership and decrement the write lock count. * * This is only for special cases where we wish to drop lock validation * recording. See RTLockValidatorRecExclCheckAndRelease. * * @param pRec The validator record. */ RTDECL(void) RTLockValidatorRecExclReleaseOwnerUnchecked(PRTLOCKVALRECEXCL pRec); /** * Checks and records a lock recursion. * * @retval VINF_SUCCESS on success. * @retval VERR_SEM_LV_NESTED if the semaphore class forbids recursion. Gone * thru the motions. * @retval VERR_SEM_LV_WRONG_ORDER if the locking order is wrong. Gone thru * the motions. * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record. * @param pSrcPos The source position of the lock operation. */ RTDECL(int) RTLockValidatorRecExclRecursion(PRTLOCKVALRECEXCL pRec, PCRTLOCKVALSRCPOS pSrcPos); /** * Checks and records a lock unwind (releasing one recursion). * * This should be coupled with called to RTLockValidatorRecExclRecursion. * * @retval VINF_SUCCESS on success. * @retval VERR_SEM_LV_WRONG_RELEASE_ORDER if the release order is wrong. Gone * thru the motions. * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record. */ RTDECL(int) RTLockValidatorRecExclUnwind(PRTLOCKVALRECEXCL pRec); /** * Checks and records a mixed recursion. * * An example of a mixed recursion is a writer requesting read access to a * SemRW. * * This should be coupled with called to RTLockValidatorRecExclUnwindMixed. * * @retval VINF_SUCCESS on success. * @retval VERR_SEM_LV_NESTED if the semaphore class forbids recursion. Gone * thru the motions. * @retval VERR_SEM_LV_WRONG_ORDER if the locking order is wrong. Gone thru * the motions. * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record it to accounted it to. * @param pRecMixed The validator record it came in on. * @param pSrcPos The source position of the lock operation. */ RTDECL(int) RTLockValidatorRecExclRecursionMixed(PRTLOCKVALRECEXCL pRec, PRTLOCKVALRECCORE pRecMixed, PCRTLOCKVALSRCPOS pSrcPos); /** * Checks and records the unwinding of a mixed recursion. * * This should be coupled with called to RTLockValidatorRecExclRecursionMixed. * * @retval VINF_SUCCESS on success. * @retval VERR_SEM_LV_WRONG_RELEASE_ORDER if the release order is wrong. Gone * thru the motions. * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record it was accounted to. * @param pRecMixed The validator record it came in on. */ RTDECL(int) RTLockValidatorRecExclUnwindMixed(PRTLOCKVALRECEXCL pRec, PRTLOCKVALRECCORE pRecMixed); /** * Check the exclusive locking order. * * This is called by routines implementing exclusive lock acquisition. * * @retval VINF_SUCCESS on success. * @retval VERR_SEM_LV_WRONG_ORDER if the order is wrong. Will have done all * necessary whining and breakpointing before returning. * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record. * @param hThreadSelf The handle of the calling thread. If not known, * pass NIL_RTTHREAD and we'll figure it out. * @param pSrcPos The source position of the lock operation. * @param cMillies The timeout, in milliseconds. */ RTDECL(int) RTLockValidatorRecExclCheckOrder(PRTLOCKVALRECEXCL pRec, RTTHREAD hThreadSelf, PCRTLOCKVALSRCPOS pSrcPos, RTMSINTERVAL cMillies); /** * Do deadlock detection before blocking on exclusive access to a lock and * change the thread state. * * @retval VINF_SUCCESS - thread is in the specified sleep state. * @retval VERR_SEM_LV_DEADLOCK if blocking would deadlock. Gone thru the * motions. * @retval VERR_SEM_LV_NESTED if the semaphore isn't recursive and hThread is * already the owner. Gone thru the motions. * @retval VERR_SEM_LV_ILLEGAL_UPGRADE if it's a deadlock on the same lock. * The caller must handle any legal upgrades without invoking this * function (for now). * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record we're blocking on. * @param hThreadSelf The current thread. Shall not be NIL_RTTHREAD! * @param pSrcPos The source position of the lock operation. * @param fRecursiveOk Whether it's ok to recurse. * @param cMillies The timeout, in milliseconds. * @param enmSleepState The sleep state to enter on successful return. * @param fReallySleeping Is it really going to sleep now or not. Use * false before calls to other IPRT synchronization * methods. */ RTDECL(int) RTLockValidatorRecExclCheckBlocking(PRTLOCKVALRECEXCL pRec, RTTHREAD hThreadSelf, PCRTLOCKVALSRCPOS pSrcPos, bool fRecursiveOk, RTMSINTERVAL cMillies, RTTHREADSTATE enmSleepState, bool fReallySleeping); /** * RTLockValidatorRecExclCheckOrder and RTLockValidatorRecExclCheckBlocking * baked into one call. * * @returns Any of the statuses returned by the two APIs. * @param pRec The validator record. * @param hThreadSelf The current thread. Shall not be NIL_RTTHREAD! * @param pSrcPos The source position of the lock operation. * @param fRecursiveOk Whether it's ok to recurse. * @param cMillies The timeout, in milliseconds. * @param enmSleepState The sleep state to enter on successful return. * @param fReallySleeping Is it really going to sleep now or not. Use * false before calls to other IPRT synchronization * methods. */ RTDECL(int) RTLockValidatorRecExclCheckOrderAndBlocking(PRTLOCKVALRECEXCL pRec, RTTHREAD hThreadSelf, PCRTLOCKVALSRCPOS pSrcPos, bool fRecursiveOk, RTMSINTERVAL cMillies, RTTHREADSTATE enmSleepState, bool fReallySleeping); /** * Initialize a lock validator record for a shared lock. * * Use RTLockValidatorRecSharedDelete to deinitialize it. * * @param pRec The shared lock record. * @param hClass The class (no reference consumed). If NIL, the * no lock order validation will be performed on * this lock. * @param uSubClass The sub-class. This is used to define lock * order inside the same class. If you don't know, * then pass RTLOCKVAL_SUB_CLASS_NONE. * @param hLock The lock handle. * @param fSignaller Set if event semaphore signaller logic should be * applied to this record, clear if read-write * semaphore logic should be used. * @param fEnabled Pass @c false to explicitly disable lock * validation, otherwise @c true. * @param pszNameFmt Name format string for the lock validator, * optional (NULL). Max length is 32 bytes. * @param ... Format string arguments. */ RTDECL(void) RTLockValidatorRecSharedInit(PRTLOCKVALRECSHRD pRec, RTLOCKVALCLASS hClass, uint32_t uSubClass, void *hLock, bool fSignaller, bool fEnabled, const char *pszNameFmt, ...); /** * Initialize a lock validator record for a shared lock. * * Use RTLockValidatorRecSharedDelete to deinitialize it. * * @param pRec The shared lock record. * @param hClass The class (no reference consumed). If NIL, the * no lock order validation will be performed on * this lock. * @param uSubClass The sub-class. This is used to define lock * order inside the same class. If you don't know, * then pass RTLOCKVAL_SUB_CLASS_NONE. * @param hLock The lock handle. * @param fSignaller Set if event semaphore signaller logic should be * applied to this record, clear if read-write * semaphore logic should be used. * @param fEnabled Pass @c false to explicitly disable lock * validation, otherwise @c true. * @param pszNameFmt Name format string for the lock validator, * optional (NULL). Max length is 32 bytes. * @param va Format string arguments. */ RTDECL(void) RTLockValidatorRecSharedInitV(PRTLOCKVALRECSHRD pRec, RTLOCKVALCLASS hClass, uint32_t uSubClass, void *hLock, bool fSignaller, bool fEnabled, const char *pszNameFmt, va_list va); /** * Uninitialize a lock validator record previously initialized by * RTLockValidatorRecSharedInit. * * @param pRec The shared lock record. Must be valid. */ RTDECL(void) RTLockValidatorRecSharedDelete(PRTLOCKVALRECSHRD pRec); /** * Sets the sub-class of the record. * * It is recommended to try make sure that nobody is using this class while * changing the value. * * @returns The old sub-class. RTLOCKVAL_SUB_CLASS_INVALID is returns if the * lock validator isn't compiled in or either of the parameters are * invalid. * @param pRec The validator record. * @param uSubClass The new sub-class value. */ RTDECL(uint32_t) RTLockValidatorRecSharedSetSubClass(PRTLOCKVALRECSHRD pRec, uint32_t uSubClass); /** * Check the shared locking order. * * This is called by routines implementing shared lock acquisition. * * @retval VINF_SUCCESS on success. * @retval VERR_SEM_LV_WRONG_ORDER if the order is wrong. Will have done all * necessary whining and breakpointing before returning. * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record. * @param hThreadSelf The handle of the calling thread. If not known, * pass NIL_RTTHREAD and we'll figure it out. * @param pSrcPos The source position of the lock operation. */ RTDECL(int) RTLockValidatorRecSharedCheckOrder(PRTLOCKVALRECSHRD pRec, RTTHREAD hThreadSelf, PCRTLOCKVALSRCPOS pSrcPos, RTMSINTERVAL cMillies); /** * Do deadlock detection before blocking on shared access to a lock and change * the thread state. * * @retval VINF_SUCCESS - thread is in the specified sleep state. * @retval VERR_SEM_LV_DEADLOCK if blocking would deadlock. Gone thru the * motions. * @retval VERR_SEM_LV_NESTED if the semaphore isn't recursive and hThread is * already the owner. Gone thru the motions. * @retval VERR_SEM_LV_ILLEGAL_UPGRADE if it's a deadlock on the same lock. * The caller must handle any legal upgrades without invoking this * function (for now). * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record we're blocking on. * @param hThreadSelf The current thread. Shall not be NIL_RTTHREAD! * @param pSrcPos The source position of the lock operation. * @param fRecursiveOk Whether it's ok to recurse. * @param enmSleepState The sleep state to enter on successful return. * @param fReallySleeping Is it really going to sleep now or not. Use * false before calls to other IPRT synchronization * methods. */ RTDECL(int) RTLockValidatorRecSharedCheckBlocking(PRTLOCKVALRECSHRD pRec, RTTHREAD hThreadSelf, PCRTLOCKVALSRCPOS pSrcPos, bool fRecursiveOk, RTMSINTERVAL cMillies, RTTHREADSTATE enmSleepState, bool fReallySleeping); /** * RTLockValidatorRecSharedCheckOrder and RTLockValidatorRecSharedCheckBlocking * baked into one call. * * @returns Any of the statuses returned by the two APIs. * @param pRec The validator record. * @param hThreadSelf The current thread. Shall not be NIL_RTTHREAD! * @param pSrcPos The source position of the lock operation. * @param fRecursiveOk Whether it's ok to recurse. * @param enmSleepState The sleep state to enter on successful return. * @param fReallySleeping Is it really going to sleep now or not. Use * false before calls to other IPRT synchronization * methods. */ RTDECL(int) RTLockValidatorRecSharedCheckOrderAndBlocking(PRTLOCKVALRECSHRD pRec, RTTHREAD hThreadSelf, PCRTLOCKVALSRCPOS pSrcPos, bool fRecursiveOk, RTMSINTERVAL cMillies, RTTHREADSTATE enmSleepState, bool fReallySleeping); /** * Removes all current owners and makes hThread the only owner. * * @param pRec The validator record. * @param hThread The thread handle of the owner. NIL_RTTHREAD is * an alias for the current thread. * @param pSrcPos The source position of the lock operation. */ RTDECL(void) RTLockValidatorRecSharedResetOwner(PRTLOCKVALRECSHRD pRec, RTTHREAD hThread, PCRTLOCKVALSRCPOS pSrcPos); /** * Adds an owner to a shared locking record. * * Takes recursion into account. This function is typically called after * acquiring the lock in shared mode. * * @param pRec The validator record. * @param hThread The thread handle of the owner. NIL_RTTHREAD is * an alias for the current thread. * @param pSrcPos The source position of the lock operation. */ RTDECL(void) RTLockValidatorRecSharedAddOwner(PRTLOCKVALRECSHRD pRec, RTTHREAD hThread, PCRTLOCKVALSRCPOS pSrcPos); /** * Removes an owner from a shared locking record. * * Takes recursion into account. This function is typically called before * releaseing the lock. * * @param pRec The validator record. * @param hThread The thread handle of the owner. NIL_RTTHREAD is * an alias for the current thread. */ RTDECL(void) RTLockValidatorRecSharedRemoveOwner(PRTLOCKVALRECSHRD pRec, RTTHREAD hThread); /** * Checks if the specified thread is one of the owners. * * @returns true if it is, false if not. * * @param pRec The validator record. * @param hThread The thread handle of the owner. NIL_RTTHREAD is * an alias for the current thread. */ RTDECL(bool) RTLockValidatorRecSharedIsOwner(PRTLOCKVALRECSHRD pRec, RTTHREAD hThread); /** * Check the exit order and release (unset) the shared ownership. * * This is called by routines implementing releasing the read/write lock. * * @retval VINF_SUCCESS on success. * @retval VERR_SEM_LV_WRONG_RELEASE_ORDER if the order is wrong. Will have * done all necessary whining and breakpointing before returning. * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record. * @param hThreadSelf The handle of the calling thread. NIL_RTTHREAD * is an alias for the current thread. */ RTDECL(int) RTLockValidatorRecSharedCheckAndRelease(PRTLOCKVALRECSHRD pRec, RTTHREAD hThreadSelf); /** * Check the signaller of an event. * * This is called by routines implementing releasing the event sempahore (both * kinds). * * @retval VINF_SUCCESS on success. * @retval VERR_SEM_LV_NOT_SIGNALLER if the thread is not in the record. Will * have done all necessary whining and breakpointing before returning. * @retval VERR_SEM_LV_INVALID_PARAMETER if the input is invalid. * * @param pRec The validator record. * @param hThreadSelf The handle of the calling thread. NIL_RTTHREAD * is an alias for the current thread. */ RTDECL(int) RTLockValidatorRecSharedCheckSignaller(PRTLOCKVALRECSHRD pRec, RTTHREAD hThreadSelf); /** * Gets the number of write locks and critical sections the specified * thread owns. * * This number does not include any nested lock/critect entries. * * Note that it probably will return 0 for non-strict builds since * release builds doesn't do unnecessary diagnostic counting like this. * * @returns Number of locks on success (0+) and VERR_INVALID_HANDLER on failure * @param Thread The thread we're inquiring about. * @remarks Will only work for strict builds. */ RTDECL(int32_t) RTLockValidatorWriteLockGetCount(RTTHREAD Thread); /** * Works the THREADINT::cWriteLocks member, mostly internal. * * @param Thread The current thread. */ RTDECL(void) RTLockValidatorWriteLockInc(RTTHREAD Thread); /** * Works the THREADINT::cWriteLocks member, mostly internal. * * @param Thread The current thread. */ RTDECL(void) RTLockValidatorWriteLockDec(RTTHREAD Thread); /** * Gets the number of read locks the specified thread owns. * * Note that nesting read lock entry will be included in the * total sum. And that it probably will return 0 for non-strict * builds since release builds doesn't do unnecessary diagnostic * counting like this. * * @returns Number of read locks on success (0+) and VERR_INVALID_HANDLER on failure * @param Thread The thread we're inquiring about. */ RTDECL(int32_t) RTLockValidatorReadLockGetCount(RTTHREAD Thread); /** * Works the THREADINT::cReadLocks member. * * @param Thread The current thread. */ RTDECL(void) RTLockValidatorReadLockInc(RTTHREAD Thread); /** * Works the THREADINT::cReadLocks member. * * @param Thread The current thread. */ RTDECL(void) RTLockValidatorReadLockDec(RTTHREAD Thread); /** * Query which lock the specified thread is waiting on. * * @returns The lock handle value or NULL. * @param hThread The thread in question. */ RTDECL(void *) RTLockValidatorQueryBlocking(RTTHREAD hThread); /** * Checks if the thread is running in the lock validator after it has entered a * block state. * * @returns true if it is, false if it isn't. * @param hThread The thread in question. */ RTDECL(bool) RTLockValidatorIsBlockedThreadInValidator(RTTHREAD hThread); /** * Creates a new lock validator class, all properties specified. * * @returns IPRT status code * @param phClass Where to return the class handle. * @param pSrcPos The source position of the create call. * @param fAutodidact Whether the class should be allowed to teach * itself new locking order rules (true), or if the * user will teach it all it needs to know (false). * @param fRecursionOk Whether to allow lock recursion or not. * @param fStrictReleaseOrder Enforce strict lock release order or not. * @param cMsMinDeadlock Used to raise the sleep interval at which * deadlock detection kicks in. Minimum is 1 ms, * while RT_INDEFINITE_WAIT will disable it. * @param cMsMinOrder Used to raise the sleep interval at which lock * order validation kicks in. Minimum is 1 ms, * while RT_INDEFINITE_WAIT will disable it. * @param pszNameFmt Class name format string, optional (NULL). Max * length is 32 bytes. * @param ... Format string arguments. * * @remarks The properties can be modified after creation by the * RTLockValidatorClassSet* methods. */ RTDECL(int) RTLockValidatorClassCreateEx(PRTLOCKVALCLASS phClass, PCRTLOCKVALSRCPOS pSrcPos, bool fAutodidact, bool fRecursionOk, bool fStrictReleaseOrder, RTMSINTERVAL cMsMinDeadlock, RTMSINTERVAL cMsMinOrder, const char *pszNameFmt, ...); /** * Creates a new lock validator class, all properties specified. * * @returns IPRT status code * @param phClass Where to return the class handle. * @param pSrcPos The source position of the create call. * @param fAutodidact Whether the class should be allowed to teach * itself new locking order rules (true), or if the * user will teach it all it needs to know (false). * @param fRecursionOk Whether to allow lock recursion or not. * @param fStrictReleaseOrder Enforce strict lock release order or not. * @param cMsMinDeadlock Used to raise the sleep interval at which * deadlock detection kicks in. Minimum is 1 ms, * while RT_INDEFINITE_WAIT will disable it. * @param cMsMinOrder Used to raise the sleep interval at which lock * order validation kicks in. Minimum is 1 ms, * while RT_INDEFINITE_WAIT will disable it. * @param pszNameFmt Class name format string, optional (NULL). Max * length is 32 bytes. * @param va Format string arguments. * * @remarks The properties can be modified after creation by the * RTLockValidatorClassSet* methods. */ RTDECL(int) RTLockValidatorClassCreateExV(PRTLOCKVALCLASS phClass, PCRTLOCKVALSRCPOS pSrcPos, bool fAutodidact, bool fRecursionOk, bool fStrictReleaseOrder, RTMSINTERVAL cMsMinDeadlock, RTMSINTERVAL cMsMinOrder, const char *pszNameFmt, va_list va); /** * Creates a new lock validator class. * * @returns IPRT status code * @param phClass Where to return the class handle. * @param fAutodidact Whether the class should be allowed to teach * itself new locking order rules (true), or if the * user will teach it all it needs to know (false). * @param pszFile The source position of the call, file. * @param iLine The source position of the call, line. * @param pszFunction The source position of the call, function. * @param pszNameFmt Class name format string, optional (NULL). Max * length is 32 bytes. * @param ... Format string arguments. */ RTDECL(int) RTLockValidatorClassCreate(PRTLOCKVALCLASS phClass, bool fAutodidact, RT_SRC_POS_DECL, const char *pszNameFmt, ...); /** * Creates a new lock validator class with a reference that is consumed by the * first call to RTLockValidatorClassRetain. * * This is tailored for use in the parameter list of a semaphore constructor. * * @returns Class handle with a reference that is automatically consumed by the * first retainer. NIL_RTLOCKVALCLASS if we run into trouble. * * @param pszFile The source position of the call, file. * @param iLine The source position of the call, line. * @param pszFunction The source position of the call, function. * @param pszNameFmt Class name format string, optional (NULL). Max * length is 32 bytes. * @param ... Format string arguments. */ RTDECL(RTLOCKVALCLASS) RTLockValidatorClassCreateUnique(RT_SRC_POS_DECL, const char *pszNameFmt, ...); /** * Finds a class for the specified source position. * * @returns A handle to the class (not retained!) or NIL_RTLOCKVALCLASS. * @param pSrcPos The source position. */ RTDECL(RTLOCKVALCLASS) RTLockValidatorClassFindForSrcPos(PRTLOCKVALSRCPOS pSrcPos); /** * Finds or creates a class given the source position. * * @returns Class handle (not retained!) or NIL_RTLOCKVALCLASS. * @param pszFile The source file. * @param iLine The line in that source file. * @param pszFunction The function name. * @param pszNameFmt Class name format string, optional (NULL). Max * length is 32 bytes. * @param ... Format string arguments. */ RTDECL(RTLOCKVALCLASS) RTLockValidatorClassForSrcPos(RT_SRC_POS_DECL, const char *pszNameFmt, ...); /** * Retains a reference to a lock validator class. * * @returns New reference count; UINT32_MAX if the handle is invalid. * @param hClass Handle to the class. */ RTDECL(uint32_t) RTLockValidatorClassRetain(RTLOCKVALCLASS hClass); /** * Releases a reference to a lock validator class. * * @returns New reference count. 0 if hClass is NIL_RTLOCKVALCLASS. UINT32_MAX * if the handle is invalid. * @param hClass Handle to the class. */ RTDECL(uint32_t) RTLockValidatorClassRelease(RTLOCKVALCLASS hClass); /** * Teaches the class @a hClass that locks in the class @a hPriorClass can be * held when taking a lock of class @hClass * * @returns IPRT status. * @param hClass Handle to the pupil class. * @param hPriorClass Handle to the class that can be held prior to * taking a lock in the pupil class. (No reference * is consumed.) */ RTDECL(int) RTLockValidatorClassAddPriorClass(RTLOCKVALCLASS hClass, RTLOCKVALCLASS hPriorClass); /** * Enables or disables the strict release order enforcing. * * @returns IPRT status. * @param hClass Handle to the class to change. * @param fEnable Enable it (true) or disable it (false). */ RTDECL(int) RTLockValidatorClassEnforceStrictReleaseOrder(RTLOCKVALCLASS hClass, bool fEnabled); /** * Enables / disables the lock validator for new locks. * * @returns The old setting. * @param fEnabled The new setting. */ RTDECL(bool) RTLockValidatorSetEnabled(bool fEnabled); /** * Is the lock validator enabled? * * @returns True if enabled, false if not. */ RTDECL(bool) RTLockValidatorIsEnabled(void); /** * Controls whether the lock validator should be quiet or noisy (default). * * @returns The old setting. * @param fQuiet The new setting. */ RTDECL(bool) RTLockValidatorSetQuiet(bool fQuiet); /** * Is the lock validator quiet or noisy? * * @returns True if it is quiet, false if noisy. */ RTDECL(bool) RTLockValidatorIsQuiet(void); /** * Makes the lock validator panic (default) or not. * * @returns The old setting. * @param fPanic The new setting. */ RTDECL(bool) RTLockValidatorSetMayPanic(bool fPanic); /** * Can the lock validator cause panic. * * @returns True if it can, false if not. */ RTDECL(bool) RTLockValidatorMayPanic(void); RT_C_DECLS_END /** @} */ #endif