/** @file * IPRT - Path Manipulation. */ /* * Copyright (C) 2006-2007 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_path_h #define ___iprt_path_h #include #include #ifdef IN_RING3 # include #endif RT_C_DECLS_BEGIN /** @defgroup grp_rt_path RTPath - Path Manipulation * @ingroup grp_rt * @{ */ /** * Host max path (the reasonable value). * @remarks defined both by iprt/param.h and iprt/path.h. */ #if !defined(___iprt_param_h) || defined(DOXYGEN_RUNNING) # define RTPATH_MAX (4096 + 4) /* (PATH_MAX + 1) on linux w/ some alignment */ #endif /** @def RTPATH_SLASH * The preferred slash character. * * @remark IPRT will always accept unix slashes. So, normally you would * never have to use this define. */ #if defined(RT_OS_OS2) || defined(RT_OS_WINDOWS) # define RTPATH_SLASH '\\' #else # define RTPATH_SLASH '/' #endif /** @deprecated Use '/'! */ #define RTPATH_DELIMITER RTPATH_SLASH /** @def RTPATH_SLASH_STR * The preferred slash character as a string, handy for concatenations * with other strings. * * @remark IPRT will always accept unix slashes. So, normally you would * never have to use this define. */ #if defined(RT_OS_OS2) || defined(RT_OS_WINDOWS) # define RTPATH_SLASH_STR "\\" #else # define RTPATH_SLASH_STR "/" #endif /** @def RTPATH_IS_SLASH * Checks if a character is a slash. * * @returns true if it's a slash and false if not. * @returns @param ch Char to check. */ #if defined(RT_OS_OS2) || defined(RT_OS_WINDOWS) # define RTPATH_IS_SLASH(ch) ( (ch) == '\\' || (ch) == '/' ) #else # define RTPATH_IS_SLASH(ch) ( (ch) == '/' ) #endif /** @def RTPATH_IS_VOLSEP * Checks if a character marks the end of the volume specification. * * @remark This is sufficient for the drive letter concept on PC. * However it might be insufficient on other platforms * and even on PC a UNC volume spec won't be detected this way. * Use the RTPath@() instead. * * @returns true if it is and false if it isn't. * @returns @param ch Char to check. */ #if defined(RT_OS_OS2) || defined(RT_OS_WINDOWS) # define RTPATH_IS_VOLSEP(ch) ( (ch) == ':' ) #else # define RTPATH_IS_VOLSEP(ch) (false) #endif /** @def RTPATH_IS_SEP * Checks if a character is path component separator * * @returns true if it is and false if it isn't. * @returns @param ch Char to check. * @ */ #define RTPATH_IS_SEP(ch) ( RTPATH_IS_SLASH(ch) || RTPATH_IS_VOLSEP(ch) ) /** @name Generic RTPath flags * @{ */ /** Last component: Work on the link. */ #define RTPATH_F_ON_LINK RT_BIT_32(0) /** Last component: Follow if link. */ #define RTPATH_F_FOLLOW_LINK RT_BIT_32(1) /** @} */ /** Validates a flags parameter containing RTPATH_F_*. * @remarks The parameters will be referenced multiple times. */ #define RTPATH_F_IS_VALID(fFlags, fIgnore) \ ( ((fFlags) & ~(uint32_t)(fIgnore)) == RTPATH_F_ON_LINK \ || ((fFlags) & ~(uint32_t)(fIgnore)) == RTPATH_F_FOLLOW_LINK ) /** * Checks if the path exists. * * Symbolic links will all be attempted resolved and broken links means false. * * @returns true if it exists and false if it doesn't. * @param pszPath The path to check. */ RTDECL(bool) RTPathExists(const char *pszPath); /** * Checks if the path exists. * * @returns true if it exists and false if it doesn't. * @param pszPath The path to check. * @param fFlags RTPATH_F_ON_LINK or RTPATH_F_FOLLOW_LINK. */ RTDECL(bool) RTPathExistsEx(const char *pszPath, uint32_t fFlags); /** * Sets the current working directory of the process. * * @returns IPRT status code. * @param pszPath The path to the new working directory. */ RTDECL(int) RTPathSetCurrent(const char *pszPath); /** * Gets the current working directory of the process. * * @returns IPRT status code. * @param pszPath Where to store the path. * @param cchPath The size of the buffer pszPath points to. */ RTDECL(int) RTPathGetCurrent(char *pszPath, size_t cchPath); /** * Get the real path (no symlinks, no . or .. components), must exist. * * @returns iprt status code. * @param pszPath The path to resolve. * @param pszRealPath Where to store the real path. * @param cchRealPath Size of the buffer. */ RTDECL(int) RTPathReal(const char *pszPath, char *pszRealPath, size_t cchRealPath); /** * Same as RTPathReal only the result is RTStrDup()'ed. * * @returns Pointer to real path. Use RTStrFree() to free this string. * @returns NULL if RTPathReal() or RTStrDup() fails. * @param pszPath The path to resolve. */ RTDECL(char *) RTPathRealDup(const char *pszPath); /** * Get the absolute path (starts from root, no . or .. components), doesn't have * to exist. Note that this method is designed to never perform actual file * system access, therefore symlinks are not resolved. * * @returns iprt status code. * @param pszPath The path to resolve. * @param pszAbsPath Where to store the absolute path. * @param cchAbsPath Size of the buffer. */ RTDECL(int) RTPathAbs(const char *pszPath, char *pszAbsPath, size_t cchAbsPath); /** * Same as RTPathAbs only the result is RTStrDup()'ed. * * @returns Pointer to the absolute path. Use RTStrFree() to free this string. * @returns NULL if RTPathAbs() or RTStrDup() fails. * @param pszPath The path to resolve. */ RTDECL(char *) RTPathAbsDup(const char *pszPath); /** * Get the absolute path (no symlinks, no . or .. components), assuming the * given base path as the current directory. The resulting path doesn't have * to exist. * * @returns iprt status code. * @param pszBase The base path to act like a current directory. * When NULL, the actual cwd is used (i.e. the call * is equivalent to RTPathAbs(pszPath, ...). * @param pszPath The path to resolve. * @param pszAbsPath Where to store the absolute path. * @param cchAbsPath Size of the buffer. */ RTDECL(int) RTPathAbsEx(const char *pszBase, const char *pszPath, char *pszAbsPath, size_t cchAbsPath); /** * Same as RTPathAbsEx only the result is RTStrDup()'ed. * * @returns Pointer to the absolute path. Use RTStrFree() to free this string. * @returns NULL if RTPathAbsEx() or RTStrDup() fails. * @param pszBase The base path to act like a current directory. * When NULL, the actual cwd is used (i.e. the call * is equivalent to RTPathAbs(pszPath, ...). * @param pszPath The path to resolve. */ RTDECL(char *) RTPathAbsExDup(const char *pszBase, const char *pszPath); /** * Strips the filename from a path. Truncates the given string in-place by overwriting the * last path separator character with a null byte in a platform-neutral way. * * @param pszPath Path from which filename should be extracted, will be truncated. * If the string contains no path separator, it will be changed to a "." string. */ RTDECL(void) RTPathStripFilename(char *pszPath); /** * Strips the extension from a path. * * @param pszPath Path which extension should be stripped. */ RTDECL(void) RTPathStripExt(char *pszPath); /** * Strips the trailing slashes of a path name. * * Won't strip root slashes. * * @returns The new length of pszPath. * @param pszPath Path to strip. */ RTDECL(size_t) RTPathStripTrailingSlash(char *pszPath); /** * Changes all the slashes in the specified path to DOS style. * * Unless @a fForce is set, nothing will be done when on a UNIX flavored system * since paths wont work with DOS style slashes there. * * @returns @a pszPath. * @param pszPath The path to modify. * @param fForce Whether to force the conversion on non-DOS OSes. */ RTDECL(char *) RTPathChangeToDosSlashes(char *pszPath, bool fForce); /** * Changes all the slashes in the specified path to unix style. * * Unless @a fForce is set, nothing will be done when on a UNIX flavored system * since paths wont work with DOS style slashes there. * * @returns @a pszPath. * @param pszPath The path to modify. * @param fForce Whether to force the conversion on non-DOS OSes. */ RTDECL(char *) RTPathChangeToUnixSlashes(char *pszPath, bool fForce); /** * Parses a path. * * It figures the length of the directory component, the offset of * the file name and the location of the suffix dot. * * @returns The path length. * * @param pszPath Path to find filename in. * @param pcchDir Where to put the length of the directory component. If * no directory, this will be 0. Optional. * @param poffName Where to store the filename offset. * If empty string or if it's ending with a slash this * will be set to -1. Optional. * @param poffSuff Where to store the suffix offset (the last dot). * If empty string or if it's ending with a slash this * will be set to -1. Optional. */ RTDECL(size_t) RTPathParse(const char *pszPath, size_t *pcchDir, ssize_t *poffName, ssize_t *poffSuff); /** * Finds the filename in a path. * * @returns Pointer to filename within pszPath. * @returns NULL if no filename (i.e. empty string or ends with a slash). * @param pszPath Path to find filename in. */ RTDECL(char *) RTPathFilename(const char *pszPath); /** * Finds the extension part of in a path. * * @returns Pointer to extension within pszPath. * @returns NULL if no extension. * @param pszPath Path to find extension in. */ RTDECL(char *) RTPathExt(const char *pszPath); /** * Checks if a path have an extension. * * @returns true if extension present. * @returns false if no extension. * @param pszPath Path to check. */ RTDECL(bool) RTPathHaveExt(const char *pszPath); /** * Checks if a path includes more than a filename. * * @returns true if path present. * @returns false if no path. * @param pszPath Path to check. */ RTDECL(bool) RTPathHavePath(const char *pszPath); /** * Checks if the path starts with a root specifier or not. * * @returns @c true if it starts with root, @c false if not. * * @param pszPath Path to check. */ RTDECL(bool) RTPathStartsWithRoot(const char *pszPath); /** * Counts the components in the specified path. * * An empty string has zero components. A lone root slash is considered have * one. The paths "/init" and "/bin/" are considered having two components. An * UNC share specifier like "\\myserver\share" will be considered as one single * component. * * @returns The number of path components. * @param pszPath The path to parse. */ RTDECL(size_t) RTPathCountComponents(const char *pszPath); /** * Copies the specified number of path components from @a pszSrc and into @a * pszDst. * * @returns VINF_SUCCESS or VERR_BUFFER_OVERFLOW. In the latter case the buffer * is not touched. * * @param pszDst The destination buffer. * @param cbDst The size of the destination buffer. * @param pszSrc The source path. * @param cComponents The number of components to copy from @a pszSrc. */ RTDECL(int) RTPathCopyComponents(char *pszDst, size_t cbDst, const char *pszSrc, size_t cComponents); /** * Compares two paths. * * The comparison takes platform-dependent details into account, * such as: *
    *
  • On DOS-like platforms, both separator chars (|\| and |/|) are considered * to be equal. *
  • On platforms with case-insensitive file systems, mismatching characters * are uppercased and compared again. *
* * @returns @< 0 if the first path less than the second path. * @returns 0 if the first path identical to the second path. * @returns @> 0 if the first path greater than the second path. * * @param pszPath1 Path to compare (must be an absolute path). * @param pszPath2 Path to compare (must be an absolute path). * * @remarks File system details are currently ignored. This means that you won't * get case-insensitive compares on unix systems when a path goes into a * case-insensitive filesystem like FAT, HPFS, HFS, NTFS, JFS, or * similar. For NT, OS/2 and similar you'll won't get case-sensitive * compares on a case-sensitive file system. */ RTDECL(int) RTPathCompare(const char *pszPath1, const char *pszPath2); /** * Checks if a path starts with the given parent path. * * This means that either the path and the parent path matches completely, or * that the path is to some file or directory residing in the tree given by the * parent directory. * * The path comparison takes platform-dependent details into account, * see RTPathCompare() for details. * * @returns |true| when \a pszPath starts with \a pszParentPath (or when they * are identical), or |false| otherwise. * * @param pszPath Path to check, must be an absolute path. * @param pszParentPath Parent path, must be an absolute path. * No trailing directory slash! * * @remarks This API doesn't currently handle root directory compares in a * manner consistent with the other APIs. RTPathStartsWith(pszSomePath, * "/") will not work if pszSomePath isn't "/". */ RTDECL(bool) RTPathStartsWith(const char *pszPath, const char *pszParentPath); /** * Appends one partial path to another. * * The main purpose of this function is to deal correctly with the slashes when * concatenating the two partial paths. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the result is too big to fit within * cbPathDst bytes. No changes has been made. * @retval VERR_INVALID_PARAMETER if the string pointed to by pszPath is longer * than cbPathDst-1 bytes (failed to find terminator). Asserted. * * @param pszPath The path to append pszAppend to. This serves as both * input and output. This can be empty, in which case * pszAppend is just copied over. * @param cbPathDst The size of the buffer pszPath points to, terminator * included. This should NOT be strlen(pszPath). * @param pszAppend The partial path to append to pszPath. This can be * NULL, in which case nothing is done. * * @remarks See the RTPathAppendEx remarks. */ RTDECL(int) RTPathAppend(char *pszPath, size_t cbPathDst, const char *pszAppend); /** * Appends one partial path to another. * * The main purpose of this function is to deal correctly with the slashes when * concatenating the two partial paths. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the result is too big to fit within * cbPathDst bytes. No changes has been made. * @retval VERR_INVALID_PARAMETER if the string pointed to by pszPath is longer * than cbPathDst-1 bytes (failed to find terminator). Asserted. * * @param pszPath The path to append pszAppend to. This serves as both * input and output. This can be empty, in which case * pszAppend is just copied over. * @param cbPathDst The size of the buffer pszPath points to, terminator * included. This should NOT be strlen(pszPath). * @param pszAppend The partial path to append to pszPath. This can be * NULL, in which case nothing is done. * @param cchAppendMax The maximum number or characters to take from @a * pszAppend. RTSTR_MAX is fine. * * @remarks On OS/2, Window and similar systems, concatenating a drive letter * specifier with a slash prefixed path will result in an absolute * path. Meaning, RTPathAppend(strcpy(szBuf, "C:"), sizeof(szBuf), * "/bar") will result in "C:/bar". (This follows directly from the * behavior when pszPath is empty.) * * On the other hand, when joining a drive letter specifier with a * partial path that does not start with a slash, the result is not an * absolute path. Meaning, RTPathAppend(strcpy(szBuf, "C:"), * sizeof(szBuf), "bar") will result in "C:bar". */ RTDECL(int) RTPathAppendEx(char *pszPath, size_t cbPathDst, const char *pszAppend, size_t cchAppendMax); /** * Like RTPathAppend, but with the base path as a separate argument instead of * in the path buffer. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the result is too big to fit within * cbPathDst bytes. * @retval VERR_INVALID_PARAMETER if the string pointed to by pszPath is longer * than cbPathDst-1 bytes (failed to find terminator). Asserted. * * @param pszPathDst Where to store the resulting path. * @param cbPathDst The size of the buffer pszPathDst points to, * terminator included. * @param pszPathSrc The base path to copy into @a pszPathDst before * appending @a pszAppend. * @param pszAppend The partial path to append to pszPathSrc. This can * be NULL, in which case nothing is done. * */ RTDECL(int) RTPathJoin(char *pszPathDst, size_t cbPathDst, const char *pszPathSrc, const char *pszAppend); /** * Same as RTPathJoin, except that the output buffer is allocated. * * @returns Buffer containing the joined up path, call RTStrFree to free. NULL * on allocation failure. * @param pszPathSrc The base path to copy into @a pszPathDst before * appending @a pszAppend. * @param pszAppend The partial path to append to pszPathSrc. This can * be NULL, in which case nothing is done. * */ RTDECL(char *) RTPathJoinA(const char *pszPathSrc, const char *pszAppend); /** * Extended version of RTPathJoin, both inputs can be specified as substrings. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the result is too big to fit within * cbPathDst bytes. * @retval VERR_INVALID_PARAMETER if the string pointed to by pszPath is longer * than cbPathDst-1 bytes (failed to find terminator). Asserted. * * @param pszPathDst Where to store the resulting path. * @param cbPathDst The size of the buffer pszPathDst points to, * terminator included. * @param pszPathSrc The base path to copy into @a pszPathDst before * appending @a pszAppend. * @param cchPathSrcMax The maximum number of bytes to copy from @a * pszPathSrc. RTSTR_MAX is find. * @param pszAppend The partial path to append to pszPathSrc. This can * be NULL, in which case nothing is done. * @param cchAppendMax The maximum number of bytes to copy from @a * pszAppend. RTSTR_MAX is find. * */ RTDECL(int) RTPathJoinEx(char *pszPathDst, size_t cbPathDst, const char *pszPathSrc, size_t cchPathSrcMax, const char *pszAppend, size_t cchAppendMax); /** * Callback for RTPathTraverseList that's called for each element. * * @returns IPRT style status code. Return VINF_TRY_AGAIN to continue, any other * value will abort the traversing and be returned to the caller. * * @param pchPath Pointer to the start of the current path. This is * not null terminated. * @param cchPath The length of the path. * @param pvUser1 The first user parameter. * @param pvUser2 The second user parameter. */ typedef DECLCALLBACK(int) FNRTPATHTRAVERSER(char const *pchPath, size_t cchPath, void *pvUser1, void *pvUser2); /** Pointer to a FNRTPATHTRAVERSER. */ typedef FNRTPATHTRAVERSER *PFNRTPATHTRAVERSER; /** * Traverses a string that can contain multiple paths separated by a special * character. * * @returns IPRT style status code from the callback or VERR_END_OF_STRING if * the callback returned VINF_TRY_AGAIN for all paths in the string. * * @param pszPathList The string to traverse. * @param chSep The separator character. Using the null terminator * is fine, but the result will simply be that there * will only be one callback for the entire string * (save any leading white space). * @param pfnCallback The callback. * @param pvUser1 First user argument for the callback. * @param pvUser2 Second user argument for the callback. */ RTDECL(int) RTPathTraverseList(const char *pszPathList, char chSep, PFNRTPATHTRAVERSER pfnCallback, void *pvUser1, void *pvUser2); #ifdef IN_RING3 /** * Gets the path to the directory containing the executable. * * @returns iprt status code. * @param pszPath Buffer where to store the path. * @param cchPath Buffer size in bytes. */ RTDECL(int) RTPathExecDir(char *pszPath, size_t cchPath); /** * Gets the user home directory. * * @returns iprt status code. * @param pszPath Buffer where to store the path. * @param cchPath Buffer size in bytes. */ RTDECL(int) RTPathUserHome(char *pszPath, size_t cchPath); /** * Gets the directory of shared libraries. * * This is not the same as RTPathAppPrivateArch() as Linux depends all shared * libraries in a common global directory where ld.so can find them. * * Linux: /usr/lib * Solaris: /opt/@/@@ or something * Windows: @/@ * Old path: same as RTPathExecDir() * * @returns iprt status code. * @param pszPath Buffer where to store the path. * @param cchPath Buffer size in bytes. */ RTDECL(int) RTPathSharedLibs(char *pszPath, size_t cchPath); /** * Gets the directory for architecture-independent application data, for * example NLS files, module sources, ... * * Linux: /usr/shared/@ * Solaris: /opt/@ * Windows: @/@ * Old path: same as RTPathExecDir() * * @returns iprt status code. * @param pszPath Buffer where to store the path. * @param cchPath Buffer size in bytes. */ RTDECL(int) RTPathAppPrivateNoArch(char *pszPath, size_t cchPath); /** * Gets the directory for architecture-dependent application data, for * example modules which can be loaded at runtime. * * Linux: /usr/lib/@ * Solaris: /opt/@/@@ or something * Windows: @/@ * Old path: same as RTPathExecDir() * * @returns iprt status code. * @param pszPath Buffer where to store the path. * @param cchPath Buffer size in bytes. */ RTDECL(int) RTPathAppPrivateArch(char *pszPath, size_t cchPath); /** * Gets the toplevel directory for architecture-dependent application data. * * This differs from RTPathAppPrivateArch on Solaris only where it will work * around the /opt/@/amd64 and /opt/@/i386 multi * architecture installation style. * * Linux: /usr/lib/@ * Solaris: /opt/@ * Windows: @/@ * Old path: same as RTPathExecDir() * * @returns iprt status code. * @param pszPath Buffer where to store the path. * @param cchPath Buffer size in bytes. */ RTDECL(int) RTPathAppPrivateArchTop(char *pszPath, size_t cchPath); /** * Gets the directory for documentation. * * Linux: /usr/share/doc/@ * Solaris: /opt/@ * Windows: @/@ * Old path: same as RTPathExecDir() * * @returns iprt status code. * @param pszPath Buffer where to store the path. * @param cchPath Buffer size in bytes. */ RTDECL(int) RTPathAppDocs(char *pszPath, size_t cchPath); /** * Gets the temporary directory path. * * @returns iprt status code. * @param pszPath Buffer where to store the path. * @param cchPath Buffer size in bytes. */ RTDECL(int) RTPathTemp(char *pszPath, size_t cchPath); /** * Query information about a file system object. * * This API will resolve NOT symbolic links in the last component (just like * unix lstat()). * * @returns IPRT status code. * @retval VINF_SUCCESS if the object exists, information returned. * @retval VERR_PATH_NOT_FOUND if any but the last component in the specified * path was not found or was not a directory. * @retval VERR_FILE_NOT_FOUND if the object does not exist (but path to the * parent directory exists). * * @param pszPath Path to the file system object. * @param pObjInfo Object information structure to be filled on successful * return. * @param enmAdditionalAttribs * Which set of additional attributes to request. * Use RTFSOBJATTRADD_NOTHING if this doesn't matter. */ RTR3DECL(int) RTPathQueryInfo(const char *pszPath, PRTFSOBJINFO pObjInfo, RTFSOBJATTRADD enmAdditionalAttribs); /** * Query information about a file system object. * * @returns IPRT status code. * @retval VINF_SUCCESS if the object exists, information returned. * @retval VERR_PATH_NOT_FOUND if any but the last component in the specified * path was not found or was not a directory. * @retval VERR_FILE_NOT_FOUND if the object does not exist (but path to the * parent directory exists). * * @param pszPath Path to the file system object. * @param pObjInfo Object information structure to be filled on successful return. * @param enmAdditionalAttribs * Which set of additional attributes to request. * Use RTFSOBJATTRADD_NOTHING if this doesn't matter. * @param fFlags RTPATH_F_ON_LINK or RTPATH_F_FOLLOW_LINK. */ RTR3DECL(int) RTPathQueryInfoEx(const char *pszPath, PRTFSOBJINFO pObjInfo, RTFSOBJATTRADD enmAdditionalAttribs, uint32_t fFlags); /** * Changes the mode flags of a file system object. * * The API requires at least one of the mode flag sets (Unix/Dos) to * be set. The type is ignored. * * This API will resolve symbolic links in the last component since * mode isn't important for symbolic links. * * @returns iprt status code. * @param pszPath Path to the file system object. * @param fMode The new file mode, see @ref grp_rt_fs for details. */ RTR3DECL(int) RTPathSetMode(const char *pszPath, RTFMODE fMode); /** * Gets the mode flags of a file system object. * * @returns iprt status code. * @param pszPath Path to the file system object. * @param pfMode Where to store the file mode, see @ref grp_rt_fs for details. * * @remark This is wrapper around RTPathQueryInfoEx(RTPATH_F_FOLLOW_LINK) and * exists to complement RTPathSetMode(). */ RTR3DECL(int) RTPathGetMode(const char *pszPath, PRTFMODE pfMode); /** * Changes one or more of the timestamps associated of file system object. * * This API will not resolve symbolic links in the last component (just * like unix lutimes()). * * @returns iprt status code. * @param pszPath Path to the file system object. * @param pAccessTime Pointer to the new access time. * @param pModificationTime Pointer to the new modification time. * @param pChangeTime Pointer to the new change time. NULL if not to be changed. * @param pBirthTime Pointer to the new time of birth. NULL if not to be changed. * * @remark The file system might not implement all these time attributes, * the API will ignore the ones which aren't supported. * * @remark The file system might not implement the time resolution * employed by this interface, the time will be chopped to fit. * * @remark The file system may update the change time even if it's * not specified. * * @remark POSIX can only set Access & Modification and will always set both. */ RTR3DECL(int) RTPathSetTimes(const char *pszPath, PCRTTIMESPEC pAccessTime, PCRTTIMESPEC pModificationTime, PCRTTIMESPEC pChangeTime, PCRTTIMESPEC pBirthTime); /** * Changes one or more of the timestamps associated of file system object. * * @returns iprt status code. * @param pszPath Path to the file system object. * @param pAccessTime Pointer to the new access time. * @param pModificationTime Pointer to the new modification time. * @param pChangeTime Pointer to the new change time. NULL if not to be changed. * @param pBirthTime Pointer to the new time of birth. NULL if not to be changed. * @param fFlags RTPATH_F_ON_LINK or RTPATH_F_FOLLOW_LINK. * * @remark The file system might not implement all these time attributes, * the API will ignore the ones which aren't supported. * * @remark The file system might not implement the time resolution * employed by this interface, the time will be chopped to fit. * * @remark The file system may update the change time even if it's * not specified. * * @remark POSIX can only set Access & Modification and will always set both. */ RTR3DECL(int) RTPathSetTimesEx(const char *pszPath, PCRTTIMESPEC pAccessTime, PCRTTIMESPEC pModificationTime, PCRTTIMESPEC pChangeTime, PCRTTIMESPEC pBirthTime, uint32_t fFlags); /** * Gets one or more of the timestamps associated of file system object. * * @returns iprt status code. * @param pszPath Path to the file system object. * @param pAccessTime Where to store the access time. NULL is ok. * @param pModificationTime Where to store the modification time. NULL is ok. * @param pChangeTime Where to store the change time. NULL is ok. * @param pBirthTime Where to store the creation time. NULL is ok. * * @remark This is wrapper around RTPathQueryInfo() and exists to complement * RTPathSetTimes(). If the last component is a symbolic link, it will * not be resolved. */ RTR3DECL(int) RTPathGetTimes(const char *pszPath, PRTTIMESPEC pAccessTime, PRTTIMESPEC pModificationTime, PRTTIMESPEC pChangeTime, PRTTIMESPEC pBirthTime); /** * Changes the owner and/or group of a file system object. * * This API will not resolve symbolic links in the last component (just * like unix lchown()). * * @returns iprt status code. * @param pszPath Path to the file system object. * @param uid The new file owner user id. Pass NIL_RTUID to leave * this unchanged. * @param gid The new group id. Pass NIL_RTGUID to leave this * unchanged. */ RTR3DECL(int) RTPathSetOwner(const char *pszPath, uint32_t uid, uint32_t gid); /** * Changes the owner and/or group of a file system object. * * @returns iprt status code. * @param pszPath Path to the file system object. * @param uid The new file owner user id. Pass NIL_RTUID to leave * this unchanged. * @param gid The new group id. Pass NIL_RTGID to leave this * unchanged. * @param fFlags RTPATH_F_ON_LINK or RTPATH_F_FOLLOW_LINK. */ RTR3DECL(int) RTPathSetOwnerEx(const char *pszPath, uint32_t uid, uint32_t gid, uint32_t fFlags); /** * Gets the owner and/or group of a file system object. * * @returns iprt status code. * @param pszPath Path to the file system object. * @param pUid Where to store the owner user id. NULL is ok. * @param pGid Where to store the group id. NULL is ok. * * @remark This is wrapper around RTPathQueryInfo() and exists to complement * RTPathGetOwner(). If the last component is a symbolic link, it will * not be resolved. */ RTR3DECL(int) RTPathGetOwner(const char *pszPath, uint32_t *pUid, uint32_t *pGid); /** @name RTPathRename, RTDirRename & RTFileRename flags. * @{ */ /** Do not replace anything. */ #define RTPATHRENAME_FLAGS_NO_REPLACE UINT32_C(0) /** This will replace attempt any target which isn't a directory. */ #define RTPATHRENAME_FLAGS_REPLACE RT_BIT(0) /** @} */ /** * Renames a path within a filesystem. * * This will rename symbolic links. If RTPATHRENAME_FLAGS_REPLACE is used and * pszDst is a symbolic link, it will be replaced and not its target. * * @returns IPRT status code. * @param pszSrc The source path. * @param pszDst The destination path. * @param fRename Rename flags, RTPATHRENAME_FLAGS_*. */ RTR3DECL(int) RTPathRename(const char *pszSrc, const char *pszDst, unsigned fRename); #endif /* IN_RING3 */ /** @} */ RT_C_DECLS_END #endif