/** @file * IPRT - Request packets */ /* * Copyright (C) 2006-2007 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ #ifndef ___iprt_req_h #define ___iprt_req_h #include #include #include __BEGIN_DECLS /** @defgroup grp_rt_req RTReq - Request Packet Management * @ingroup grp_rt * @{ */ /** * Request type. */ typedef enum RTREQTYPE { /** Invalid request. */ RTREQTYPE_INVALID = 0, /** RT: Internal. */ RTREQTYPE_INTERNAL, /** Maximum request type (exclusive). Used for validation. */ RTREQTYPE_MAX } RTREQTYPE; /** * Request state. */ typedef enum RTREQSTATE { /** The state is invalid. */ RTREQSTATE_INVALID = 0, /** The request have been allocated and is in the process of being filed. */ RTREQSTATE_ALLOCATED, /** The request is queued by the requester. */ RTREQSTATE_QUEUED, /** The request is begin processed. */ RTREQSTATE_PROCESSING, /** The request is completed, the requester is begin notified. */ RTREQSTATE_COMPLETED, /** The request packet is in the free chain. (The requester */ RTREQSTATE_FREE } RTREQSTATE; /** * Request flags. */ typedef enum RTREQFLAGS { /** The request returns a iprt status code. */ RTREQFLAGS_IPRT_STATUS = 0, /** The request is a void request and have no status code. */ RTREQFLAGS_VOID = 1, /** Return type mask. */ RTREQFLAGS_RETURN_MASK = 1, /** Caller does not wait on the packet, Queue process thread will free it. */ RTREQFLAGS_NO_WAIT = 2 } RTREQFLAGS; /** Pointer to a request queue. */ typedef struct RTREQQUEUE *PRTREQQUEUE; /** * RT Request packet. * * This is used to request an action in the queue handler thread. */ typedef struct RTREQ { /** Pointer to the next request in the chain. */ struct RTREQ * volatile pNext; /** Pointer to the queue this packet belongs to. */ PRTREQQUEUE pQueue; /** Request state. */ volatile RTREQSTATE enmState; /** iprt status code for the completed request. */ volatile int iStatus; /** Requester event sem. * The request can use this event semaphore to wait/poll for completion * of the request. */ RTSEMEVENT EventSem; /** Set if the event semaphore is clear. */ volatile bool fEventSemClear; /** Flags, RTREQ_FLAGS_*. */ unsigned fFlags; /** Request type. */ RTREQTYPE enmType; /** Request specific data. */ union RTREQ_U { /** RTREQTYPE_INTERNAL. */ struct { /** Pointer to the function to be called. */ PFNRT pfn; /** Number of arguments. */ unsigned cArgs; /** Array of arguments. */ uintptr_t aArgs[64]; } Internal; } u; } RTREQ; /** Pointer to an RT request packet. */ typedef RTREQ *PRTREQ; /** @todo hide this */ typedef struct RTREQQUEUE { /** Head of the request queue. Atomic. */ volatile PRTREQ pReqs; /** The last index used during alloc/free. */ volatile uint32_t iReqFree; /** Number of free request packets. */ volatile uint32_t cReqFree; /** Array of pointers to lists of free request packets. Atomic. */ volatile PRTREQ apReqFree[9]; /** Requester event sem. * The request can use this event semaphore to wait/poll for new requests. */ RTSEMEVENT EventSem; } RTREQQUEUE; #ifdef IN_RING3 /** * Create a request packet queueu * * @returns iprt status code. * @param ppQueue Where to store the request queue pointer. */ RTDECL(int) RTReqCreateQueue(PRTREQQUEUE *ppQueue); /** * Destroy a request packet queueu * * @returns iprt status code. * @param pQueue The request queue. */ RTDECL(int) RTReqDestroyQueue(PRTREQQUEUE pQueue); /** * Process one or more request packets * * @returns iprt status code. * @returns VERR_TIMEOUT if cMillies was reached without the packet being added. * * @param pQueue The request queue. * @param cMillies Number of milliseconds to wait for a pending request. * Use RT_INDEFINITE_WAIT to only wait till one is added. */ RTDECL(int) RTReqProcess(PRTREQQUEUE pQueue, unsigned cMillies); /** * Allocate and queue a call request. * * If it's desired to poll on the completion of the request set cMillies * to 0 and use RTReqWait() to check for completation. In the other case * use RT_INDEFINITE_WAIT. * The returned request packet must be freed using RTReqFree(). * * @returns iprt statuscode. * Will not return VERR_INTERRUPTED. * @returns VERR_TIMEOUT if cMillies was reached without the packet being completed. * * @param pQueue The request queue. * @param ppReq Where to store the pointer to the request. * This will be NULL or a valid request pointer not matter what happends. * @param cMillies Number of milliseconds to wait for the request to * be completed. Use RT_INDEFINITE_WAIT to only * wait till it's completed. * @param pfnFunction Pointer to the function to call. * @param cArgs Number of arguments following in the ellipsis. * The arguments must be of integer or pointer type and * not bigger in size than uintptr_t. Do not try pass * 64-bit integers directly in portable code. * @param ... Function arguments. */ RTDECL(int) RTReqCall(PRTREQQUEUE pQueue, PRTREQ *ppReq, unsigned cMillies, PFNRT pfnFunction, unsigned cArgs, ...); /** * Allocate and queue a call request to a void function. * * If it's desired to poll on the completion of the request set cMillies * to 0 and use RTReqWait() to check for completation. In the other case * use RT_INDEFINITE_WAIT. * The returned request packet must be freed using RTReqFree(). * * @returns iprt status code. * Will not return VERR_INTERRUPTED. * @returns VERR_TIMEOUT if cMillies was reached without the packet being completed. * * @param pQueue The request queue. * @param ppReq Where to store the pointer to the request. * This will be NULL or a valid request pointer not matter what happends. * @param cMillies Number of milliseconds to wait for the request to * be completed. Use RT_INDEFINITE_WAIT to only * wait till it's completed. * @param pfnFunction Pointer to the function to call. * @param cArgs Number of arguments following in the ellipsis. * The arguments must be of integer or pointer type and * not bigger in size than uintptr_t. Do not try pass * 64-bit integers directly in portable code. * @param ... Function arguments. */ RTDECL(int) RTReqCallVoid(PRTREQQUEUE pQueue, PRTREQ *ppReq, unsigned cMillies, PFNRT pfnFunction, unsigned cArgs, ...); /** * Allocate and queue a call request to a void function. * * If it's desired to poll on the completion of the request set cMillies * to 0 and use RTReqWait() to check for completation. In the other case * use RT_INDEFINITE_WAIT. * The returned request packet must be freed using RTReqFree(). * * @returns iprt status code. * Will not return VERR_INTERRUPTED. * @returns VERR_TIMEOUT if cMillies was reached without the packet being completed. * * @param pQueue The request queue. * @param ppReq Where to store the pointer to the request. * This will be NULL or a valid request pointer not matter what happends, unless fFlags * contains RTREQFLAGS_NO_WAIT when it will be optional and always NULL. * @param cMillies Number of milliseconds to wait for the request to * be completed. Use RT_INDEFINITE_WAIT to only * wait till it's completed. * @param fFlags A combination of the RTREQFLAGS values. * @param pfnFunction Pointer to the function to call. * @param cArgs Number of arguments following in the ellipsis. * The arguments must be of integer or pointer type and * not bigger in size than uintptr_t. Do not try pass * 64-bit integers directly in portable code. * @param ... Function arguments. */ RTDECL(int) RTReqCallEx(PRTREQQUEUE pQueue, PRTREQ *ppReq, unsigned cMillies, unsigned fFlags, PFNRT pfnFunction, unsigned cArgs, ...); /** * Allocate and queue a call request. * * If it's desired to poll on the completion of the request set cMillies * to 0 and use RTReqWait() to check for completation. In the other case * use RT_INDEFINITE_WAIT. * The returned request packet must be freed using RTReqFree(). * * @returns iprt status code. * Will not return VERR_INTERRUPTED. * @returns VERR_TIMEOUT if cMillies was reached without the packet being completed. * * @param pQueue The request queue. * @param ppReq Where to store the pointer to the request. * This will be NULL or a valid request pointer not matter what happends, unless fFlags * contains RTREQFLAGS_NO_WAIT when it will be optional and always NULL. * @param cMillies Number of milliseconds to wait for the request to * be completed. Use RT_INDEFINITE_WAIT to only * wait till it's completed. * @param fFlags A combination of the RTREQFLAGS values. * @param pfnFunction Pointer to the function to call. * @param cArgs Number of arguments following in the ellipsis. * The arguments must be of integer or pointer type and * not bigger in size than uintptr_t. Do not try pass * 64-bit integers directly in portable code. * @param Args Variable argument vector. */ RTDECL(int) RTReqCallV(PRTREQQUEUE pQueue, PRTREQ *ppReq, unsigned cMillies, unsigned fFlags, PFNRT pfnFunction, unsigned cArgs, va_list Args); /** * Allocates a request packet. * * The caller allocates a request packet, fills in the request data * union and queues the request. * * @returns iprt status code. * * @param pQueue The request queue. * @param ppReq Where to store the pointer to the allocated packet. * @param enmType Package type. */ RTDECL(int) RTReqAlloc(PRTREQQUEUE pQueue, PRTREQ *ppReq, RTREQTYPE enmType); /** * Free a request packet. * * @returns iprt status code. * * @param pReq Package to free. * @remark The request packet must be in allocated or completed state! */ RTDECL(int) RTReqFree(PRTREQ pReq); /** * Queue a request. * * The quest must be allocated using RTReqAlloc() and contain * all the required data. * If it's disired to poll on the completion of the request set cMillies * to 0 and use RTReqWait() to check for completation. In the other case * use RT_INDEFINITE_WAIT. * * @returns iprt status code. * Will not return VERR_INTERRUPTED. * @returns VERR_TIMEOUT if cMillies was reached without the packet being completed. * * @param pReq The request to queue. * @param cMillies Number of milliseconds to wait for the request to * be completed. Use RT_INDEFINITE_WAIT to only * wait till it's completed. */ RTDECL(int) RTReqQueue(PRTREQ pReq, unsigned cMillies); /** * Wait for a request to be completed. * * @returns iprt status code. * Will not return VERR_INTERRUPTED. * @returns VERR_TIMEOUT if cMillies was reached without the packet being completed. * * @param pReq The request to wait for. * @param cMillies Number of milliseconds to wait. * Use RT_INDEFINITE_WAIT to only wait till it's completed. */ RTDECL(int) RTReqWait(PRTREQ pReq, unsigned cMillies); #endif /* IN_RING3 */ /** @} */ __END_DECLS #endif