/** @file * IPRT - S/G buffer handling. */ /* * Copyright (C) 2010-2015 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_sg_h #define ___iprt_sg_h #include RT_C_DECLS_BEGIN /** * A S/G entry. */ typedef struct RTSGSEG { /** Pointer to the segment buffer. */ void *pvSeg; /** Size of the segment buffer. */ size_t cbSeg; } RTSGSEG; /** Pointer to a S/G entry. */ typedef RTSGSEG *PRTSGSEG; /** Pointer to a const S/G entry. */ typedef const RTSGSEG *PCRTSGSEG; /** Pointer to a S/G entry pointer. */ typedef PRTSGSEG *PPRTSGSEG; /** * A S/G buffer. * * The members should be treated as private. */ typedef struct RTSGBUF { /** Pointer to the scatter/gather array. */ PCRTSGSEG paSegs; /** Number of segments. */ unsigned cSegs; /** Current segment we are in. */ unsigned idxSeg; /** Pointer to the current segment start. */ void *pvSegCur; /** Number of bytes left in the current buffer. */ size_t cbSegLeft; } RTSGBUF; /** Pointer to a S/G entry. */ typedef RTSGBUF *PRTSGBUF; /** Pointer to a const S/G entry. */ typedef const RTSGBUF *PCRTSGBUF; /** Pointer to a S/G entry pointer. */ typedef PRTSGBUF *PPRTSGBUF; /** * Initialize a S/G buffer structure. * * @returns nothing. * @param pSgBuf Pointer to the S/G buffer to initialize. * @param paSegs Pointer to the start of the segment array. * @param cSegs Number of segments in the array. */ RTDECL(void) RTSgBufInit(PRTSGBUF pSgBuf, PCRTSGSEG paSegs, size_t cSegs); /** * Resets the internal buffer position of the S/G buffer to the beginning. * * @returns nothing. * @param pSgBuf The S/G buffer to reset. */ RTDECL(void) RTSgBufReset(PRTSGBUF pSgBuf); /** * Clones a given S/G buffer. * * @returns nothing. * @param pSgBufNew The new S/G buffer to clone to. * @param pSgBufOld The source S/G buffer to clone from. * * @note This is only a shallow copy. Both S/G buffers will point to the * same segment array. */ RTDECL(void) RTSgBufClone(PRTSGBUF pSgBufNew, PCRTSGBUF pSgBufOld); /** * Returns the next segment in the S/G buffer or NULL if no segment is left. * * @returns Pointer to the next segment in the S/G buffer. * @param pSgBuf The S/G buffer. * @param pcbSeg Where to store the size of the returned segment. * Holds the number of bytes requested initially or 0 to * indicate that the size doesn't matter. * This may contain fewer bytes on success if the current segment * is smaller than the amount of bytes requested. * * @note This operation advances the internal buffer pointer of both S/G buffers. */ RTDECL(void *) RTSgBufGetNextSegment(PRTSGBUF pSgBuf, size_t *pcbSeg); /** * Copy data between two S/G buffers. * * @returns The number of bytes copied. * @param pSgBufDst The destination S/G buffer. * @param pSgBufSrc The source S/G buffer. * @param cbCopy Number of bytes to copy. * * @note This operation advances the internal buffer pointer of both S/G buffers. */ RTDECL(size_t) RTSgBufCopy(PRTSGBUF pSgBufDst, PRTSGBUF pSgBufSrc, size_t cbCopy); /** * Compares the content of two S/G buffers. * * @returns Whatever memcmp returns. * @param pSgBuf1 First S/G buffer. * @param pSgBuf2 Second S/G buffer. * @param cbCmp How many bytes to compare. * * @note This operation doesn't change the internal position of the S/G buffers. */ RTDECL(int) RTSgBufCmp(PCRTSGBUF pSgBuf1, PCRTSGBUF pSgBuf2, size_t cbCmp); /** * Compares the content of two S/G buffers - advanced version. * * @returns Whatever memcmp returns. * @param pSgBuf1 First S/G buffer. * @param pSgBuf2 Second S/G buffer. * @param cbCmp How many bytes to compare. * @param pcbOff Where to store the offset of the first different byte * in the buffer starting from the position of the S/G * buffer before this call. * @param fAdvance Flag whether the internal buffer position should be advanced. * */ RTDECL(int) RTSgBufCmpEx(PRTSGBUF pSgBuf1, PRTSGBUF pSgBuf2, size_t cbCmp, size_t *pcbOff, bool fAdvance); /** * Fills an S/G buf with a constant byte. * * @returns The number of actually filled bytes. * Can be less than than cbSet if the end of the S/G buffer was reached. * @param pSgBuf The S/G buffer. * @param ubFill The byte to fill the buffer with. * @param cbSet How many bytes to set. * * @note This operation advances the internal buffer pointer of the S/G buffer. */ RTDECL(size_t) RTSgBufSet(PRTSGBUF pSgBuf, uint8_t ubFill, size_t cbSet); /** * Copies data from an S/G buffer into a given non scattered buffer. * * @returns Number of bytes copied. * @param pSgBuf The S/G buffer to copy from. * @param pvBuf Buffer to copy the data into. * @param cbCopy How many bytes to copy. * * @note This operation advances the internal buffer pointer of the S/G buffer. */ RTDECL(size_t) RTSgBufCopyToBuf(PRTSGBUF pSgBuf, void *pvBuf, size_t cbCopy); /** * Copies data from a non scattered buffer into an S/G buffer. * * @returns Number of bytes copied. * @param pSgBuf The S/G buffer to copy to. * @param pvBuf Buffer to copy the data from. * @param cbCopy How many bytes to copy. * * @note This operation advances the internal buffer pointer of the S/G buffer. */ RTDECL(size_t) RTSgBufCopyFromBuf(PRTSGBUF pSgBuf, const void *pvBuf, size_t cbCopy); /** * Advances the internal buffer pointer. * * @returns Number of bytes the pointer was moved forward. * @param pSgBuf The S/G buffer. * @param cbAdvance Number of bytes to move forward. */ RTDECL(size_t) RTSgBufAdvance(PRTSGBUF pSgBuf, size_t cbAdvance); /** * Constructs a new segment array starting from the current position * and describing the given number of bytes. * * @returns Number of bytes the array describes. * @param pSgBuf The S/G buffer. * @param paSeg The uninitialized segment array. * If NULL pcSeg will contain the number of segments needed * to describe the requested amount of data. * @param pcSeg The number of segments the given array has. * This will hold the actual number of entries needed upon return. * @param cbData Number of bytes the new array should describe. * * @note This operation advances the internal buffer pointer of the S/G buffer if paSeg is not NULL. */ RTDECL(size_t) RTSgBufSegArrayCreate(PRTSGBUF pSgBuf, PRTSGSEG paSeg, unsigned *pcSeg, size_t cbData); /** * Returns whether the given S/G buffer is zeroed out from the current position * upto the number of bytes to check. * * @returns true if the buffer has only zeros * false otherwise. * @param pSgBuf The S/G buffer. * @param cbCheck Number of bytes to check. */ RTDECL(bool) RTSgBufIsZero(PRTSGBUF pSgBuf, size_t cbCheck); /** * Maps the given S/G buffer to a segment array of another type (for example to * iovec on POSIX or WSABUF on Windows). * * @param paMapped Where to store the pointer to the start of the native * array or NULL. The memory needs to be freed with * RTMemTmpFree(). * @param pSgBuf The S/G buffer to map. * @param Struct Struct used as the destination. * @param pvBufField Name of the field holding the pointer to a buffer. * @param TypeBufPtr Type of the buffer pointer. * @param cbBufField Name of the field holding the size of the buffer. * @param TypeBufSize Type of the field for the buffer size. * @param cSegsMapped Where to store the number of segments the native array * has. * * @note This operation maps the whole S/G buffer starting at the current * internal position. The internal buffer position is unchanged by * this operation. * * @remark Usage is a bit ugly but saves a few lines of duplicated code * somewhere else and makes it possible to keep the S/G buffer members * private without going through RTSgBufSegArrayCreate() first. */ #define RTSgBufMapToNative(paMapped, pSgBuf, Struct, pvBufField, TypeBufPtr, cbBufField, TypeBufSize, cSegsMapped) \ do \ { \ AssertCompileMemberSize(Struct, pvBufField, RT_SIZEOFMEMB(RTSGSEG, pvSeg)); \ /*AssertCompile(RT_SIZEOFMEMB(Struct, cbBufField) >= RT_SIZEOFMEMB(RTSGSEG, cbSeg));*/ \ (cSegsMapped) = (pSgBuf)->cSegs - (pSgBuf)->idxSeg; \ \ /* We need room for at least one segment. */ \ if ((pSgBuf)->cSegs == (pSgBuf)->idxSeg) \ (cSegsMapped)++; \ \ (paMapped) = (Struct *)RTMemTmpAllocZ((cSegsMapped) * sizeof(Struct)); \ if ((paMapped)) \ { \ /* The first buffer is special because we could be in the middle of a segment. */ \ (paMapped)[0].pvBufField = (TypeBufPtr)(pSgBuf)->pvSegCur; \ (paMapped)[0].cbBufField = (TypeBufSize)(pSgBuf)->cbSegLeft; \ \ for (unsigned i = 1; i < (cSegsMapped); i++) \ { \ (paMapped)[i].pvBufField = (TypeBufPtr)(pSgBuf)->paSegs[(pSgBuf)->idxSeg + i].pvSeg; \ (paMapped)[i].cbBufField = (TypeBufSize)(pSgBuf)->paSegs[(pSgBuf)->idxSeg + i].cbSeg; \ } \ } \ } while (0) RT_C_DECLS_END /** @} */ #endif