/** @file * IPRT - String Manipulation. */ /* * Copyright (C) 2006-2016 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_string_h #define ___iprt_string_h #include #include #include #include #include /* for VINF_SUCCESS */ #if defined(RT_OS_LINUX) && defined(__KERNEL__) /* no C++ hacks ('new' etc) here anymore! */ # include #elif defined(IN_XF86_MODULE) && !defined(NO_ANSIC) RT_C_DECLS_BEGIN # include "xf86_ansic.h" RT_C_DECLS_END #elif defined(RT_OS_FREEBSD) && defined(_KERNEL) RT_C_DECLS_BEGIN # include RT_C_DECLS_END #elif defined(RT_OS_NETBSD) && defined(_KERNEL) RT_C_DECLS_BEGIN # include RT_C_DECLS_END #elif defined(RT_OS_SOLARIS) && defined(_KERNEL) /* * Same case as with FreeBSD kernel: * The string.h stuff clashes with sys/system.h * ffs = find first set bit. */ # define ffs ffs_string_h # include # undef ffs # undef strpbrk #else # include #endif /* For the time being: */ #include #include /* * Supply prototypes for standard string functions provided by * IPRT instead of the operating environment. */ #if defined(RT_OS_DARWIN) && defined(KERNEL) RT_C_DECLS_BEGIN void *memchr(const void *pv, int ch, size_t cb); char *strpbrk(const char *pszStr, const char *pszChars); RT_C_DECLS_END #endif #if defined(RT_OS_FREEBSD) && defined(_KERNEL) RT_C_DECLS_BEGIN char *strpbrk(const char *pszStr, const char *pszChars); RT_C_DECLS_END #endif #if defined(RT_OS_NETBSD) && defined(_KERNEL) RT_C_DECLS_BEGIN char *strpbrk(const char *pszStr, const char *pszChars); RT_C_DECLS_END #endif #if (!defined(RT_OS_LINUX) || !defined(_GNU_SOURCE)) && !defined(RT_OS_FREEBSD) && !defined(RT_OS_NETBSD) RT_C_DECLS_BEGIN void *memrchr(const char *pv, int ch, size_t cb); RT_C_DECLS_END #endif /** @def RT_USE_RTC_3629 * When defined the UTF-8 range will stop at 0x10ffff. If not defined, the * range stops at 0x7fffffff. * @remarks Must be defined both when building and using the IPRT. */ #ifdef DOXYGEN_RUNNING # define RT_USE_RTC_3629 #endif /** * Byte zero the specified object. * * This will use sizeof(Obj) to figure the size and will call memset, bzero * or some compiler intrinsic to perform the actual zeroing. * * @param Obj The object to zero. Make sure to dereference pointers. * * @remarks Because the macro may use memset it has been placed in string.h * instead of cdefs.h to avoid build issues because someone forgot * to include this header. * * @ingroup grp_rt_cdefs */ #define RT_ZERO(Obj) RT_BZERO(&(Obj), sizeof(Obj)) /** * Byte zero the specified memory area. * * This will call memset, bzero or some compiler intrinsic to clear the * specified bytes of memory. * * @param pv Pointer to the memory. * @param cb The number of bytes to clear. Please, don't pass 0. * * @remarks Because the macro may use memset it has been placed in string.h * instead of cdefs.h to avoid build issues because someone forgot * to include this header. * * @ingroup grp_rt_cdefs */ #define RT_BZERO(pv, cb) do { memset((pv), 0, cb); } while (0) /** @defgroup grp_rt_str RTStr - String Manipulation * Mostly UTF-8 related helpers where the standard string functions won't do. * @ingroup grp_rt * @{ */ RT_C_DECLS_BEGIN /** * The maximum string length. */ #define RTSTR_MAX (~(size_t)0) /** @def RTSTR_TAG * The default allocation tag used by the RTStr allocation APIs. * * When not defined before the inclusion of iprt/string.h, this will default to * the pointer to the current file name. The string API will make of use of * this as pointer to a volatile but read-only string. */ #if !defined(RTSTR_TAG) || defined(DOXYGEN_RUNNING) # define RTSTR_TAG (__FILE__) #endif #ifdef IN_RING3 /** * Allocates tmp buffer with default tag, translates pszString from UTF8 to * current codepage. * * @returns iprt status code. * @param ppszString Receives pointer of allocated native CP string. * The returned pointer must be freed using RTStrFree(). * @param pszString UTF-8 string to convert. */ #define RTStrUtf8ToCurrentCP(ppszString, pszString) RTStrUtf8ToCurrentCPTag((ppszString), (pszString), RTSTR_TAG) /** * Allocates tmp buffer with custom tag, translates pszString from UTF8 to * current codepage. * * @returns iprt status code. * @param ppszString Receives pointer of allocated native CP string. * The returned pointer must be freed using * RTStrFree()., const char *pszTag * @param pszString UTF-8 string to convert. * @param pszTag Allocation tag used for statistics and such. */ RTR3DECL(int) RTStrUtf8ToCurrentCPTag(char **ppszString, const char *pszString, const char *pszTag); /** * Allocates tmp buffer, translates pszString from current codepage to UTF-8. * * @returns iprt status code. * @param ppszString Receives pointer of allocated UTF-8 string. * The returned pointer must be freed using RTStrFree(). * @param pszString Native string to convert. */ #define RTStrCurrentCPToUtf8(ppszString, pszString) RTStrCurrentCPToUtf8Tag((ppszString), (pszString), RTSTR_TAG) /** * Allocates tmp buffer, translates pszString from current codepage to UTF-8. * * @returns iprt status code. * @param ppszString Receives pointer of allocated UTF-8 string. * The returned pointer must be freed using RTStrFree(). * @param pszString Native string to convert. * @param pszTag Allocation tag used for statistics and such. */ RTR3DECL(int) RTStrCurrentCPToUtf8Tag(char **ppszString, const char *pszString, const char *pszTag); #endif /* IN_RING3 */ /** * Free string allocated by any of the non-UCS-2 string functions. * * @returns iprt status code. * @param pszString Pointer to buffer with string to free. * NULL is accepted. */ RTDECL(void) RTStrFree(char *pszString); /** * Allocates a new copy of the given UTF-8 string (default tag). * * @returns Pointer to the allocated UTF-8 string. * @param pszString UTF-8 string to duplicate. */ #define RTStrDup(pszString) RTStrDupTag((pszString), RTSTR_TAG) /** * Allocates a new copy of the given UTF-8 string (custom tag). * * @returns Pointer to the allocated UTF-8 string. * @param pszString UTF-8 string to duplicate. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(char *) RTStrDupTag(const char *pszString, const char *pszTag); /** * Allocates a new copy of the given UTF-8 string (default tag). * * @returns iprt status code. * @param ppszString Receives pointer of the allocated UTF-8 string. * The returned pointer must be freed using RTStrFree(). * @param pszString UTF-8 string to duplicate. */ #define RTStrDupEx(ppszString, pszString) RTStrDupExTag((ppszString), (pszString), RTSTR_TAG) /** * Allocates a new copy of the given UTF-8 string (custom tag). * * @returns iprt status code. * @param ppszString Receives pointer of the allocated UTF-8 string. * The returned pointer must be freed using RTStrFree(). * @param pszString UTF-8 string to duplicate. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrDupExTag(char **ppszString, const char *pszString, const char *pszTag); /** * Allocates a new copy of the given UTF-8 substring (default tag). * * @returns Pointer to the allocated UTF-8 substring. * @param pszString UTF-8 string to duplicate. * @param cchMax The max number of chars to duplicate, not counting * the terminator. */ #define RTStrDupN(pszString, cchMax) RTStrDupNTag((pszString), (cchMax), RTSTR_TAG) /** * Allocates a new copy of the given UTF-8 substring (custom tag). * * @returns Pointer to the allocated UTF-8 substring. * @param pszString UTF-8 string to duplicate. * @param cchMax The max number of chars to duplicate, not counting * the terminator. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(char *) RTStrDupNTag(const char *pszString, size_t cchMax, const char *pszTag); /** * Appends a string onto an existing IPRT allocated string (default tag). * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string pointer. The string * pointer must either be NULL or point to a string * returned by an IPRT string API. (In/Out) * @param pszAppend The string to append. NULL and empty strings * are quietly ignored. */ #define RTStrAAppend(ppsz, pszAppend) RTStrAAppendTag((ppsz), (pszAppend), RTSTR_TAG) /** * Appends a string onto an existing IPRT allocated string (custom tag). * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string pointer. The string * pointer must either be NULL or point to a string * returned by an IPRT string API. (In/Out) * @param pszAppend The string to append. NULL and empty strings * are quietly ignored. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrAAppendTag(char **ppsz, const char *pszAppend, const char *pszTag); /** * Appends N bytes from a strings onto an existing IPRT allocated string * (default tag). * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string pointer. The string * pointer must either be NULL or point to a string * returned by an IPRT string API. (In/Out) * @param pszAppend The string to append. Can be NULL if cchAppend * is NULL. * @param cchAppend The number of chars (not code points) to append * from pszAppend. Must not be more than * @a pszAppend contains, except for the special * value RTSTR_MAX that can be used to indicate all * of @a pszAppend without having to strlen it. */ #define RTStrAAppendN(ppsz, pszAppend, cchAppend) RTStrAAppendNTag((ppsz), (pszAppend), (cchAppend), RTSTR_TAG) /** * Appends N bytes from a strings onto an existing IPRT allocated string (custom * tag). * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string pointer. The string * pointer must either be NULL or point to a string * returned by an IPRT string API. (In/Out) * @param pszAppend The string to append. Can be NULL if cchAppend * is NULL. * @param cchAppend The number of chars (not code points) to append * from pszAppend. Must not be more than * @a pszAppend contains, except for the special * value RTSTR_MAX that can be used to indicate all * of @a pszAppend without having to strlen it. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrAAppendNTag(char **ppsz, const char *pszAppend, size_t cchAppend, const char *pszTag); /** * Appends one or more strings onto an existing IPRT allocated string. * * This is a very flexible and efficient alternative to using RTStrAPrintf to * combine several strings together. * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string pointer. The string * pointer must either be NULL or point to a string * returned by an IPRT string API. (In/Out) * @param cPairs The number of string / length pairs in the * @a va. * @param va List of string (const char *) and length * (size_t) pairs. The strings will be appended to * the string in the first argument. */ #define RTStrAAppendExNV(ppsz, cPairs, va) RTStrAAppendExNVTag((ppsz), (cPairs), (va), RTSTR_TAG) /** * Appends one or more strings onto an existing IPRT allocated string. * * This is a very flexible and efficient alternative to using RTStrAPrintf to * combine several strings together. * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string pointer. The string * pointer must either be NULL or point to a string * returned by an IPRT string API. (In/Out) * @param cPairs The number of string / length pairs in the * @a va. * @param va List of string (const char *) and length * (size_t) pairs. The strings will be appended to * the string in the first argument. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrAAppendExNVTag(char **ppsz, size_t cPairs, va_list va, const char *pszTag); /** * Appends one or more strings onto an existing IPRT allocated string * (untagged). * * This is a very flexible and efficient alternative to using RTStrAPrintf to * combine several strings together. * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string pointer. The string * pointer must either be NULL or point to a string * returned by an IPRT string API. (In/Out) * @param cPairs The number of string / length pairs in the * ellipsis. * @param ... List of string (const char *) and length * (size_t) pairs. The strings will be appended to * the string in the first argument. */ DECLINLINE(int) RTStrAAppendExN(char **ppsz, size_t cPairs, ...) { int rc; va_list va; va_start(va, cPairs); rc = RTStrAAppendExNVTag(ppsz, cPairs, va, RTSTR_TAG); va_end(va); return rc; } /** * Appends one or more strings onto an existing IPRT allocated string (custom * tag). * * This is a very flexible and efficient alternative to using RTStrAPrintf to * combine several strings together. * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string pointer. The string * pointer must either be NULL or point to a string * returned by an IPRT string API. (In/Out) * @param pszTag Allocation tag used for statistics and such. * @param cPairs The number of string / length pairs in the * ellipsis. * @param ... List of string (const char *) and length * (size_t) pairs. The strings will be appended to * the string in the first argument. */ DECLINLINE(int) RTStrAAppendExNTag(char **ppsz, const char *pszTag, size_t cPairs, ...) { int rc; va_list va; va_start(va, cPairs); rc = RTStrAAppendExNVTag(ppsz, cPairs, va, pszTag); va_end(va); return rc; } /** * Truncates an IPRT allocated string (default tag). * * @retval VINF_SUCCESS. * @retval VERR_OUT_OF_RANGE if cchNew is too long. Nothing is done. * * @param ppsz Pointer to the string pointer. The string * pointer can be NULL if @a cchNew is 0, no change * is made then. If we actually reallocate the * string, the string pointer might be changed by * this call. (In/Out) * @param cchNew The new string length (excluding the * terminator). The string must be at least this * long or we'll return VERR_OUT_OF_RANGE and * assert on you. */ #define RTStrATruncate(ppsz, cchNew) RTStrATruncateTag((ppsz), (cchNew), RTSTR_TAG) /** * Truncates an IPRT allocated string. * * @retval VINF_SUCCESS. * @retval VERR_OUT_OF_RANGE if cchNew is too long. Nothing is done. * * @param ppsz Pointer to the string pointer. The string * pointer can be NULL if @a cchNew is 0, no change * is made then. If we actually reallocate the * string, the string pointer might be changed by * this call. (In/Out) * @param cchNew The new string length (excluding the * terminator). The string must be at least this * long or we'll return VERR_OUT_OF_RANGE and * assert on you. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrATruncateTag(char **ppsz, size_t cchNew, const char *pszTag); /** * Allocates memory for string storage (default tag). * * You should normally not use this function, except if there is some very * custom string handling you need doing that isn't covered by any of the other * APIs. * * @returns Pointer to the allocated string. The first byte is always set * to the string terminator char, the contents of the remainder of the * memory is undefined. The string must be freed by calling RTStrFree. * * NULL is returned if the allocation failed. Please translate this to * VERR_NO_STR_MEMORY and not VERR_NO_MEMORY. Also consider * RTStrAllocEx if an IPRT status code is required. * * @param cb How many bytes to allocate. If this is zero, we * will allocate a terminator byte anyway. */ #define RTStrAlloc(cb) RTStrAllocTag((cb), RTSTR_TAG) /** * Allocates memory for string storage (custom tag). * * You should normally not use this function, except if there is some very * custom string handling you need doing that isn't covered by any of the other * APIs. * * @returns Pointer to the allocated string. The first byte is always set * to the string terminator char, the contents of the remainder of the * memory is undefined. The string must be freed by calling RTStrFree. * * NULL is returned if the allocation failed. Please translate this to * VERR_NO_STR_MEMORY and not VERR_NO_MEMORY. Also consider * RTStrAllocEx if an IPRT status code is required. * * @param cb How many bytes to allocate. If this is zero, we * will allocate a terminator byte anyway. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(char *) RTStrAllocTag(size_t cb, const char *pszTag); /** * Allocates memory for string storage, with status code (default tag). * * You should normally not use this function, except if there is some very * custom string handling you need doing that isn't covered by any of the other * APIs. * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY * * @param ppsz Where to return the allocated string. This will * be set to NULL on failure. On success, the * returned memory will always start with a * terminator char so that it is considered a valid * C string, the contents of rest of the memory is * undefined. * @param cb How many bytes to allocate. If this is zero, we * will allocate a terminator byte anyway. */ #define RTStrAllocEx(ppsz, cb) RTStrAllocExTag((ppsz), (cb), RTSTR_TAG) /** * Allocates memory for string storage, with status code (custom tag). * * You should normally not use this function, except if there is some very * custom string handling you need doing that isn't covered by any of the other * APIs. * * @retval VINF_SUCCESS * @retval VERR_NO_STR_MEMORY * * @param ppsz Where to return the allocated string. This will * be set to NULL on failure. On success, the * returned memory will always start with a * terminator char so that it is considered a valid * C string, the contents of rest of the memory is * undefined. * @param cb How many bytes to allocate. If this is zero, we * will allocate a terminator byte anyway. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrAllocExTag(char **ppsz, size_t cb, const char *pszTag); /** * Reallocates the specified string (default tag). * * You should normally not have use this function, except perhaps to truncate a * really long string you've got from some IPRT string API, but then you should * use RTStrATruncate. * * @returns VINF_SUCCESS. * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string variable containing the * input and output string. * * When not freeing the string, the result will * always have the last byte set to the terminator * character so that when used for string * truncation the result will be a valid C string * (your job to keep it a valid UTF-8 string). * * When the input string is NULL and we're supposed * to reallocate, the returned string will also * have the first byte set to the terminator char * so it will be a valid C string. * * @param cbNew When @a cbNew is zero, we'll behave like * RTStrFree and @a *ppsz will be set to NULL. * * When not zero, this will be the new size of the * memory backing the string, i.e. it includes the * terminator char. */ #define RTStrRealloc(ppsz, cbNew) RTStrReallocTag((ppsz), (cbNew), RTSTR_TAG) /** * Reallocates the specified string (custom tag). * * You should normally not have use this function, except perhaps to truncate a * really long string you've got from some IPRT string API, but then you should * use RTStrATruncate. * * @returns VINF_SUCCESS. * @retval VERR_NO_STR_MEMORY if we failed to reallocate the string, @a *ppsz * remains unchanged. * * @param ppsz Pointer to the string variable containing the * input and output string. * * When not freeing the string, the result will * always have the last byte set to the terminator * character so that when used for string * truncation the result will be a valid C string * (your job to keep it a valid UTF-8 string). * * When the input string is NULL and we're supposed * to reallocate, the returned string will also * have the first byte set to the terminator char * so it will be a valid C string. * * @param cbNew When @a cbNew is zero, we'll behave like * RTStrFree and @a *ppsz will be set to NULL. * * When not zero, this will be the new size of the * memory backing the string, i.e. it includes the * terminator char. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrReallocTag(char **ppsz, size_t cbNew, const char *pszTag); /** * Validates the UTF-8 encoding of the string. * * @returns iprt status code. * @param psz The string. */ RTDECL(int) RTStrValidateEncoding(const char *psz); /** @name Flags for RTStrValidateEncodingEx and RTUtf16ValidateEncodingEx * @{ */ /** Check that the string is zero terminated within the given size. * VERR_BUFFER_OVERFLOW will be returned if the check fails. */ #define RTSTR_VALIDATE_ENCODING_ZERO_TERMINATED RT_BIT_32(0) /** Check that the string is exactly the given length. * If it terminates early, VERR_BUFFER_UNDERFLOW will be returned. When used * together with RTSTR_VALIDATE_ENCODING_ZERO_TERMINATED, the given length must * include the terminator or VERR_BUFFER_OVERFLOW will be returned. */ #define RTSTR_VALIDATE_ENCODING_EXACT_LENGTH RT_BIT_32(1) /** @} */ /** * Validates the UTF-8 encoding of the string. * * @returns iprt status code. * @param psz The string. * @param cch The max string length (/ size). Use RTSTR_MAX to * process the entire string. * @param fFlags Combination of RTSTR_VALIDATE_ENCODING_XXX flags. */ RTDECL(int) RTStrValidateEncodingEx(const char *psz, size_t cch, uint32_t fFlags); /** * Checks if the UTF-8 encoding is valid. * * @returns true / false. * @param psz The string. */ RTDECL(bool) RTStrIsValidEncoding(const char *psz); /** * Purge all bad UTF-8 encoding in the string, replacing it with '?'. * * @returns The number of bad characters (0 if nothing was done). * @param psz The string to purge. */ RTDECL(size_t) RTStrPurgeEncoding(char *psz); /** * Sanitizes a (valid) UTF-8 string by replacing all characters outside a white * list in-place by an ASCII replacement character. * * Multi-byte characters will be replaced byte by byte. * * @returns The number of code points replaced. In the case of an incorrectly * encoded string -1 will be returned, and the string is not completely * processed. In the case of puszValidPairs having an odd number of * code points, -1 will be also return but without any modification to * the string. * @param psz The string to sanitise. * @param puszValidPairs A zero-terminated array of pairs of Unicode points. * Each pair is the start and end point of a range, * and the union of these ranges forms the white list. * @param chReplacement The ASCII replacement character. */ RTDECL(ssize_t) RTStrPurgeComplementSet(char *psz, PCRTUNICP puszValidPairs, char chReplacement); /** * Gets the number of code points the string is made up of, excluding * the terminator. * * * @returns Number of code points (RTUNICP). * @returns 0 if the string was incorrectly encoded. * @param psz The string. */ RTDECL(size_t) RTStrUniLen(const char *psz); /** * Gets the number of code points the string is made up of, excluding * the terminator. * * This function will validate the string, and incorrectly encoded UTF-8 * strings will be rejected. * * @returns iprt status code. * @param psz The string. * @param cch The max string length. Use RTSTR_MAX to process the entire string. * @param pcuc Where to store the code point count. * This is undefined on failure. */ RTDECL(int) RTStrUniLenEx(const char *psz, size_t cch, size_t *pcuc); /** * Translate a UTF-8 string into an unicode string (i.e. RTUNICPs), allocating the string buffer. * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param ppUniString Receives pointer to the allocated unicode string. * The returned string must be freed using RTUniFree(). */ RTDECL(int) RTStrToUni(const char *pszString, PRTUNICP *ppUniString); /** * Translates pszString from UTF-8 to an array of code points, allocating the result * array if requested. * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param cchString The maximum size in chars (the type) to convert. The conversion stop * when it reaches cchString or the string terminator ('\\0'). * Use RTSTR_MAX to translate the entire string. * @param ppaCps If cCps is non-zero, this must either be pointing to pointer to * a buffer of the specified size, or pointer to a NULL pointer. * If *ppusz is NULL or cCps is zero a buffer of at least cCps items * will be allocated to hold the translated string. * If a buffer was requested it must be freed using RTUtf16Free(). * @param cCps The number of code points in the unicode string. This includes the terminator. * @param pcCps Where to store the length of the translated string, * excluding the terminator. (Optional) * * This may be set under some error conditions, * however, only for VERR_BUFFER_OVERFLOW and * VERR_NO_STR_MEMORY will it contain a valid string * length that can be used to resize the buffer. */ RTDECL(int) RTStrToUniEx(const char *pszString, size_t cchString, PRTUNICP *ppaCps, size_t cCps, size_t *pcCps); /** * Calculates the length of the string in RTUTF16 items. * * This function will validate the string, and incorrectly encoded UTF-8 * strings will be rejected. The primary purpose of this function is to * help allocate buffers for RTStrToUtf16Ex of the correct size. For most * other purposes RTStrCalcUtf16LenEx() should be used. * * @returns Number of RTUTF16 items. * @returns 0 if the string was incorrectly encoded. * @param psz The string. */ RTDECL(size_t) RTStrCalcUtf16Len(const char *psz); /** * Calculates the length of the string in RTUTF16 items. * * This function will validate the string, and incorrectly encoded UTF-8 * strings will be rejected. * * @returns iprt status code. * @param psz The string. * @param cch The max string length. Use RTSTR_MAX to process the entire string. * @param pcwc Where to store the string length. Optional. * This is undefined on failure. */ RTDECL(int) RTStrCalcUtf16LenEx(const char *psz, size_t cch, size_t *pcwc); /** * Translate a UTF-8 string into a UTF-16 allocating the result buffer (default * tag). * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param ppwszString Receives pointer to the allocated UTF-16 string. * The returned string must be freed using RTUtf16Free(). */ #define RTStrToUtf16(pszString, ppwszString) RTStrToUtf16Tag((pszString), (ppwszString), RTSTR_TAG) /** * Translate a UTF-8 string into a UTF-16 allocating the result buffer (custom * tag). * * This differs from RTStrToUtf16 in that it always produces a * big-endian string. * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param ppwszString Receives pointer to the allocated UTF-16 string. * The returned string must be freed using RTUtf16Free(). * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrToUtf16Tag(const char *pszString, PRTUTF16 *ppwszString, const char *pszTag); /** * Translate a UTF-8 string into a UTF-16BE allocating the result buffer * (default tag). * * This differs from RTStrToUtf16Tag in that it always produces a * big-endian string. * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param ppwszString Receives pointer to the allocated UTF-16BE string. * The returned string must be freed using RTUtf16Free(). */ #define RTStrToUtf16Big(pszString, ppwszString) RTStrToUtf16BigTag((pszString), (ppwszString), RTSTR_TAG) /** * Translate a UTF-8 string into a UTF-16BE allocating the result buffer (custom * tag). * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param ppwszString Receives pointer to the allocated UTF-16BE string. * The returned string must be freed using RTUtf16Free(). * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrToUtf16BigTag(const char *pszString, PRTUTF16 *ppwszString, const char *pszTag); /** * Translates pszString from UTF-8 to UTF-16, allocating the result buffer if requested. * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param cchString The maximum size in chars (the type) to convert. The conversion stop * when it reaches cchString or the string terminator ('\\0'). * Use RTSTR_MAX to translate the entire string. * @param ppwsz If cwc is non-zero, this must either be pointing to pointer to * a buffer of the specified size, or pointer to a NULL pointer. * If *ppwsz is NULL or cwc is zero a buffer of at least cwc items * will be allocated to hold the translated string. * If a buffer was requested it must be freed using RTUtf16Free(). * @param cwc The buffer size in RTUTF16s. This includes the terminator. * @param pcwc Where to store the length of the translated string, * excluding the terminator. (Optional) * * This may be set under some error conditions, * however, only for VERR_BUFFER_OVERFLOW and * VERR_NO_STR_MEMORY will it contain a valid string * length that can be used to resize the buffer. */ #define RTStrToUtf16Ex(pszString, cchString, ppwsz, cwc, pcwc) \ RTStrToUtf16ExTag((pszString), (cchString), (ppwsz), (cwc), (pcwc), RTSTR_TAG) /** * Translates pszString from UTF-8 to UTF-16, allocating the result buffer if * requested (custom tag). * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param cchString The maximum size in chars (the type) to convert. The conversion stop * when it reaches cchString or the string terminator ('\\0'). * Use RTSTR_MAX to translate the entire string. * @param ppwsz If cwc is non-zero, this must either be pointing to pointer to * a buffer of the specified size, or pointer to a NULL pointer. * If *ppwsz is NULL or cwc is zero a buffer of at least cwc items * will be allocated to hold the translated string. * If a buffer was requested it must be freed using RTUtf16Free(). * @param cwc The buffer size in RTUTF16s. This includes the terminator. * @param pcwc Where to store the length of the translated string, * excluding the terminator. (Optional) * * This may be set under some error conditions, * however, only for VERR_BUFFER_OVERFLOW and * VERR_NO_STR_MEMORY will it contain a valid string * length that can be used to resize the buffer. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrToUtf16ExTag(const char *pszString, size_t cchString, PRTUTF16 *ppwsz, size_t cwc, size_t *pcwc, const char *pszTag); /** * Translates pszString from UTF-8 to UTF-16BE, allocating the result buffer if requested. * * This differs from RTStrToUtf16Ex in that it always produces a * big-endian string. * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param cchString The maximum size in chars (the type) to convert. The conversion stop * when it reaches cchString or the string terminator ('\\0'). * Use RTSTR_MAX to translate the entire string. * @param ppwsz If cwc is non-zero, this must either be pointing to pointer to * a buffer of the specified size, or pointer to a NULL pointer. * If *ppwsz is NULL or cwc is zero a buffer of at least cwc items * will be allocated to hold the translated string. * If a buffer was requested it must be freed using RTUtf16Free(). * @param cwc The buffer size in RTUTF16s. This includes the terminator. * @param pcwc Where to store the length of the translated string, * excluding the terminator. (Optional) * * This may be set under some error conditions, * however, only for VERR_BUFFER_OVERFLOW and * VERR_NO_STR_MEMORY will it contain a valid string * length that can be used to resize the buffer. */ #define RTStrToUtf16BigEx(pszString, cchString, ppwsz, cwc, pcwc) \ RTStrToUtf16BigExTag((pszString), (cchString), (ppwsz), (cwc), (pcwc), RTSTR_TAG) /** * Translates pszString from UTF-8 to UTF-16BE, allocating the result buffer if * requested (custom tag). * * This differs from RTStrToUtf16ExTag in that it always produces a * big-endian string. * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param cchString The maximum size in chars (the type) to convert. The conversion stop * when it reaches cchString or the string terminator ('\\0'). * Use RTSTR_MAX to translate the entire string. * @param ppwsz If cwc is non-zero, this must either be pointing to pointer to * a buffer of the specified size, or pointer to a NULL pointer. * If *ppwsz is NULL or cwc is zero a buffer of at least cwc items * will be allocated to hold the translated string. * If a buffer was requested it must be freed using RTUtf16Free(). * @param cwc The buffer size in RTUTF16s. This includes the terminator. * @param pcwc Where to store the length of the translated string, * excluding the terminator. (Optional) * * This may be set under some error conditions, * however, only for VERR_BUFFER_OVERFLOW and * VERR_NO_STR_MEMORY will it contain a valid string * length that can be used to resize the buffer. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrToUtf16BigExTag(const char *pszString, size_t cchString, PRTUTF16 *ppwsz, size_t cwc, size_t *pcwc, const char *pszTag); /** * Calculates the length of the string in Latin-1 characters. * * This function will validate the string, and incorrectly encoded UTF-8 * strings as well as string with codepoints outside the latin-1 range will be * rejected. The primary purpose of this function is to help allocate buffers * for RTStrToLatin1Ex of the correct size. For most other purposes * RTStrCalcLatin1LenEx() should be used. * * @returns Number of Latin-1 characters. * @returns 0 if the string was incorrectly encoded. * @param psz The string. */ RTDECL(size_t) RTStrCalcLatin1Len(const char *psz); /** * Calculates the length of the string in Latin-1 characters. * * This function will validate the string, and incorrectly encoded UTF-8 * strings as well as string with codepoints outside the latin-1 range will be * rejected. * * @returns iprt status code. * @param psz The string. * @param cch The max string length. Use RTSTR_MAX to process the * entire string. * @param pcch Where to store the string length. Optional. * This is undefined on failure. */ RTDECL(int) RTStrCalcLatin1LenEx(const char *psz, size_t cch, size_t *pcch); /** * Translate a UTF-8 string into a Latin-1 allocating the result buffer (default * tag). * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param ppszString Receives pointer to the allocated Latin-1 string. * The returned string must be freed using RTStrFree(). */ #define RTStrToLatin1(pszString, ppszString) RTStrToLatin1Tag((pszString), (ppszString), RTSTR_TAG) /** * Translate a UTF-8 string into a Latin-1 allocating the result buffer (custom * tag). * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param ppszString Receives pointer to the allocated Latin-1 string. * The returned string must be freed using RTStrFree(). * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrToLatin1Tag(const char *pszString, char **ppszString, const char *pszTag); /** * Translates pszString from UTF-8 to Latin-1, allocating the result buffer if requested. * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param cchString The maximum size in chars (the type) to convert. * The conversion stop when it reaches cchString or * the string terminator ('\\0'). Use RTSTR_MAX to * translate the entire string. * @param ppsz If cch is non-zero, this must either be pointing to * pointer to a buffer of the specified size, or * pointer to a NULL pointer. If *ppsz is NULL or cch * is zero a buffer of at least cch items will be * allocated to hold the translated string. If a * buffer was requested it must be freed using * RTStrFree(). * @param cch The buffer size in bytes. This includes the * terminator. * @param pcch Where to store the length of the translated string, * excluding the terminator. (Optional) * * This may be set under some error conditions, * however, only for VERR_BUFFER_OVERFLOW and * VERR_NO_STR_MEMORY will it contain a valid string * length that can be used to resize the buffer. */ #define RTStrToLatin1Ex(pszString, cchString, ppsz, cch, pcch) \ RTStrToLatin1ExTag((pszString), (cchString), (ppsz), (cch), (pcch), RTSTR_TAG) /** * Translates pszString from UTF-8 to Latin1, allocating the result buffer if * requested (custom tag). * * @returns iprt status code. * @param pszString UTF-8 string to convert. * @param cchString The maximum size in chars (the type) to convert. * The conversion stop when it reaches cchString or * the string terminator ('\\0'). Use RTSTR_MAX to * translate the entire string. * @param ppsz If cch is non-zero, this must either be pointing to * pointer to a buffer of the specified size, or * pointer to a NULL pointer. If *ppsz is NULL or cch * is zero a buffer of at least cch items will be * allocated to hold the translated string. If a * buffer was requested it must be freed using * RTStrFree(). * @param cch The buffer size in bytes. This includes the * terminator. * @param pcch Where to store the length of the translated string, * excluding the terminator. (Optional) * * This may be set under some error conditions, * however, only for VERR_BUFFER_OVERFLOW and * VERR_NO_STR_MEMORY will it contain a valid string * length that can be used to resize the buffer. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrToLatin1ExTag(const char *pszString, size_t cchString, char **ppsz, size_t cch, size_t *pcch, const char *pszTag); /** * Get the unicode code point at the given string position. * * @returns unicode code point. * @returns RTUNICP_INVALID if the encoding is invalid. * @param psz The string. */ RTDECL(RTUNICP) RTStrGetCpInternal(const char *psz); /** * Get the unicode code point at the given string position. * * @returns iprt status code * @returns VERR_INVALID_UTF8_ENCODING if the encoding is invalid. * @param ppsz The string cursor. * This is advanced one character forward on failure. * @param pCp Where to store the unicode code point. * Stores RTUNICP_INVALID if the encoding is invalid. */ RTDECL(int) RTStrGetCpExInternal(const char **ppsz, PRTUNICP pCp); /** * Get the unicode code point at the given string position for a string of a * given length. * * @returns iprt status code * @retval VERR_INVALID_UTF8_ENCODING if the encoding is invalid. * @retval VERR_END_OF_STRING if *pcch is 0. *pCp is set to RTUNICP_INVALID. * * @param ppsz The string. * @param pcch Pointer to the length of the string. This will be * decremented by the size of the code point. * @param pCp Where to store the unicode code point. * Stores RTUNICP_INVALID if the encoding is invalid. */ RTDECL(int) RTStrGetCpNExInternal(const char **ppsz, size_t *pcch, PRTUNICP pCp); /** * Put the unicode code point at the given string position * and return the pointer to the char following it. * * This function will not consider anything at or following the * buffer area pointed to by psz. It is therefore not suitable for * inserting code points into a string, only appending/overwriting. * * @returns pointer to the char following the written code point. * @param psz The string. * @param CodePoint The code point to write. * This should not be RTUNICP_INVALID or any other * character out of the UTF-8 range. * * @remark This is a worker function for RTStrPutCp(). * */ RTDECL(char *) RTStrPutCpInternal(char *psz, RTUNICP CodePoint); /** * Get the unicode code point at the given string position. * * @returns unicode code point. * @returns RTUNICP_INVALID if the encoding is invalid. * @param psz The string. * * @remark We optimize this operation by using an inline function for * the most frequent and simplest sequence, the rest is * handled by RTStrGetCpInternal(). */ DECLINLINE(RTUNICP) RTStrGetCp(const char *psz) { const unsigned char uch = *(const unsigned char *)psz; if (!(uch & RT_BIT(7))) return uch; return RTStrGetCpInternal(psz); } /** * Get the unicode code point at the given string position. * * @returns iprt status code. * @param ppsz Pointer to the string pointer. This will be updated to * point to the char following the current code point. * This is advanced one character forward on failure. * @param pCp Where to store the code point. * RTUNICP_INVALID is stored here on failure. * * @remark We optimize this operation by using an inline function for * the most frequent and simplest sequence, the rest is * handled by RTStrGetCpExInternal(). */ DECLINLINE(int) RTStrGetCpEx(const char **ppsz, PRTUNICP pCp) { const unsigned char uch = **(const unsigned char **)ppsz; if (!(uch & RT_BIT(7))) { (*ppsz)++; *pCp = uch; return VINF_SUCCESS; } return RTStrGetCpExInternal(ppsz, pCp); } /** * Get the unicode code point at the given string position for a string of a * given maximum length. * * @returns iprt status code. * @retval VERR_INVALID_UTF8_ENCODING if the encoding is invalid. * @retval VERR_END_OF_STRING if *pcch is 0. *pCp is set to RTUNICP_INVALID. * * @param ppsz Pointer to the string pointer. This will be updated to * point to the char following the current code point. * @param pcch Pointer to the maximum string length. This will be * decremented by the size of the code point found. * @param pCp Where to store the code point. * RTUNICP_INVALID is stored here on failure. * * @remark We optimize this operation by using an inline function for * the most frequent and simplest sequence, the rest is * handled by RTStrGetCpNExInternal(). */ DECLINLINE(int) RTStrGetCpNEx(const char **ppsz, size_t *pcch, PRTUNICP pCp) { if (RT_LIKELY(*pcch != 0)) { const unsigned char uch = **(const unsigned char **)ppsz; if (!(uch & RT_BIT(7))) { (*ppsz)++; (*pcch)--; *pCp = uch; return VINF_SUCCESS; } } return RTStrGetCpNExInternal(ppsz, pcch, pCp); } /** * Get the UTF-8 size in characters of a given Unicode code point. * * The code point is expected to be a valid Unicode one, but not necessarily in * the range supported by UTF-8. * * @returns The number of chars (bytes) required to encode the code point, or * zero if there is no UTF-8 encoding. * @param CodePoint The unicode code point. */ DECLINLINE(size_t) RTStrCpSize(RTUNICP CodePoint) { if (CodePoint < 0x00000080) return 1; if (CodePoint < 0x00000800) return 2; if (CodePoint < 0x00010000) return 3; #ifdef RT_USE_RTC_3629 if (CodePoint < 0x00011000) return 4; #else if (CodePoint < 0x00200000) return 4; if (CodePoint < 0x04000000) return 5; if (CodePoint < 0x7fffffff) return 6; #endif return 0; } /** * Put the unicode code point at the given string position * and return the pointer to the char following it. * * This function will not consider anything at or following the * buffer area pointed to by psz. It is therefore not suitable for * inserting code points into a string, only appending/overwriting. * * @returns pointer to the char following the written code point. * @param psz The string. * @param CodePoint The code point to write. * This should not be RTUNICP_INVALID or any other * character out of the UTF-8 range. * * @remark We optimize this operation by using an inline function for * the most frequent and simplest sequence, the rest is * handled by RTStrPutCpInternal(). */ DECLINLINE(char *) RTStrPutCp(char *psz, RTUNICP CodePoint) { if (CodePoint < 0x80) { *psz++ = (unsigned char)CodePoint; return psz; } return RTStrPutCpInternal(psz, CodePoint); } /** * Skips ahead, past the current code point. * * @returns Pointer to the char after the current code point. * @param psz Pointer to the current code point. * @remark This will not move the next valid code point, only past the current one. */ DECLINLINE(char *) RTStrNextCp(const char *psz) { RTUNICP Cp; RTStrGetCpEx(&psz, &Cp); return (char *)psz; } /** * Skips back to the previous code point. * * @returns Pointer to the char before the current code point. * @returns pszStart on failure. * @param pszStart Pointer to the start of the string. * @param psz Pointer to the current code point. */ RTDECL(char *) RTStrPrevCp(const char *pszStart, const char *psz); /** @page pg_rt_str_format The IPRT Format Strings * * IPRT implements most of the commonly used format types and flags with the * exception of floating point which is completely missing. In addition IPRT * provides a number of IPRT specific format types for the IPRT typedefs and * other useful things. Note that several of these extensions are similar to * \%p and doesn't care much if you try add formating flags/width/precision. * * * Group 0a, The commonly used format types: * - \%s - Takes a pointer to a zero terminated string (UTF-8) and * prints it with the optionally adjustment (width, -) and * length restriction (precision). * - \%ls - Same as \%s except that the input is UTF-16 (output UTF-8). * - \%Ls - Same as \%s except that the input is UCS-32 (output UTF-8). * - \%S - Same as \%s, used to convert to current codeset but this is * now done by the streams code. Deprecated, use \%s. * - \%lS - Ditto. Deprecated, use \%ls. * - \%LS - Ditto. Deprecated, use \%Ls. * - \%c - Takes a char and prints it. * - \%d - Takes a signed integer and prints it as decimal. Thousand * separator (\'), zero padding (0), adjustment (-+), width, * precision * - \%i - Same as \%d. * - \%u - Takes an unsigned integer and prints it as decimal. Thousand * separator (\'), zero padding (0), adjustment (-+), width, * precision * - \%x - Takes an unsigned integer and prints it as lowercased * hexadecimal. The special hash (\#) flag causes a '0x' * prefixed to be printed. Zero padding (0), adjustment (-+), * width, precision. * - \%X - Same as \%x except that it is uppercased. * - \%o - Takes an unsigned (?) integer and prints it as octal. Zero * padding (0), adjustment (-+), width, precision. * - \%p - Takes a pointer (void technically) and prints it. Zero * padding (0), adjustment (-+), width, precision. * * The \%d, \%i, \%u, \%x, \%X and \%o format types support the following * argument type specifiers: * - \%ll - long long (uint64_t). * - \%L - long long (uint64_t). * - \%l - long (uint32_t, uint64_t) * - \%h - short (int16_t). * - \%hh - char (int8_t). * - \%H - char (int8_t). * - \%z - size_t. * - \%j - intmax_t (int64_t). * - \%t - ptrdiff_t. * The type in parentheses is typical sizes, however when printing those types * you are better off using the special group 2 format types below (\%RX32 and * such). * * * Group 0b, IPRT format tricks: * - %M - Replaces the format string, takes a string pointer. * - %N - Nested formatting, takes a pointer to a format string * followed by the pointer to a va_list variable. The va_list * variable will not be modified and the caller must do va_end() * on it. Make sure the va_list variable is NOT in a parameter * list or some gcc versions/targets may get it all wrong. * * * Group 1, the basic runtime typedefs (excluding those which obviously are * pointer): * - \%RTbool - Takes a bool value and prints 'true', 'false', or '!%d!'. * - \%RTfile - Takes a #RTFILE value. * - \%RTfmode - Takes a #RTFMODE value. * - \%RTfoff - Takes a #RTFOFF value. * - \%RTfp16 - Takes a #RTFAR16 value. * - \%RTfp32 - Takes a #RTFAR32 value. * - \%RTfp64 - Takes a #RTFAR64 value. * - \%RTgid - Takes a #RTGID value. * - \%RTino - Takes a #RTINODE value. * - \%RTint - Takes a #RTINT value. * - \%RTiop - Takes a #RTIOPORT value. * - \%RTldrm - Takes a #RTLDRMOD value. * - \%RTmac - Takes a #PCRTMAC pointer. * - \%RTnaddr - Takes a #PCRTNETADDR value. * - \%RTnaipv4 - Takes a #RTNETADDRIPV4 value. * - \%RTnaipv6 - Takes a #PCRTNETADDRIPV6 value. * - \%RTnthrd - Takes a #RTNATIVETHREAD value. * - \%RTnthrd - Takes a #RTNATIVETHREAD value. * - \%RTproc - Takes a #RTPROCESS value. * - \%RTptr - Takes a #RTINTPTR or #RTUINTPTR value (but not void *). * - \%RTreg - Takes a #RTCCUINTREG value. * - \%RTsel - Takes a #RTSEL value. * - \%RTsem - Takes a #RTSEMEVENT, #RTSEMEVENTMULTI, #RTSEMMUTEX, #RTSEMFASTMUTEX, or #RTSEMRW value. * - \%RTsock - Takes a #RTSOCKET value. * - \%RTthrd - Takes a #RTTHREAD value. * - \%RTuid - Takes a #RTUID value. * - \%RTuint - Takes a #RTUINT value. * - \%RTunicp - Takes a #RTUNICP value. * - \%RTutf16 - Takes a #RTUTF16 value. * - \%RTuuid - Takes a #PCRTUUID and will print the UUID as a string. * - \%RTxuint - Takes a #RTUINT or #RTINT value, formatting it as hex. * - \%RGi - Takes a #RTGCINT value. * - \%RGp - Takes a #RTGCPHYS value. * - \%RGr - Takes a #RTGCUINTREG value. * - \%RGu - Takes a #RTGCUINT value. * - \%RGv - Takes a #RTGCPTR, #RTGCINTPTR or #RTGCUINTPTR value. * - \%RGx - Takes a #RTGCUINT or #RTGCINT value, formatting it as hex. * - \%RHi - Takes a #RTHCINT value. * - \%RHp - Takes a #RTHCPHYS value. * - \%RHr - Takes a #RTHCUINTREG value. * - \%RHu - Takes a #RTHCUINT value. * - \%RHv - Takes a #RTHCPTR, #RTHCINTPTR or #RTHCUINTPTR value. * - \%RHx - Takes a #RTHCUINT or #RTHCINT value, formatting it as hex. * - \%RRv - Takes a #RTRCPTR, #RTRCINTPTR or #RTRCUINTPTR value. * - \%RCi - Takes a #RTINT value. * - \%RCp - Takes a #RTCCPHYS value. * - \%RCr - Takes a #RTCCUINTREG value. * - \%RCu - Takes a #RTUINT value. * - \%RCv - Takes a #uintptr_t, #intptr_t, void * value. * - \%RCx - Takes a #RTUINT or #RTINT value, formatting it as hex. * * * Group 2, the generic integer types which are prefered over relying on what * bit-count a 'long', 'short', or 'long long' has on a platform. This are * highly prefered for the [u]intXX_t kind of types: * - \%RI[8|16|32|64] - Signed integer value of the specifed bit count. * - \%RU[8|16|32|64] - Unsigned integer value of the specifed bit count. * - \%RX[8|16|32|64] - Hexadecimal integer value of the specifed bit count. * * * Group 3, hex dumpers and other complex stuff which requires more than simple * formatting: * - \%Rhxd - Takes a pointer to the memory which is to be dumped in typical * hex format. Use the precision to specify the length, and the width to * set the number of bytes per line. Default width and precision is 16. * - \%Rhxs - Takes a pointer to the memory to be displayed as a hex string, * i.e. a series of space separated bytes formatted as two digit hex value. * Use the precision to specify the length. Default length is 16 bytes. * The width, if specified, is ignored. * - \%Rrc - Takes an integer iprt status code as argument. Will insert the * status code define corresponding to the iprt status code. * - \%Rrs - Takes an integer iprt status code as argument. Will insert the * short description of the specified status code. * - \%Rrf - Takes an integer iprt status code as argument. Will insert the * full description of the specified status code. * - \%Rra - Takes an integer iprt status code as argument. Will insert the * status code define + full description. * - \%Rwc - Takes a long Windows error code as argument. Will insert the status * code define corresponding to the Windows error code. * - \%Rwf - Takes a long Windows error code as argument. Will insert the * full description of the specified status code. * - \%Rwa - Takes a long Windows error code as argument. Will insert the * error code define + full description. * * - \%Rhrc - Takes a COM/XPCOM status code as argument. Will insert the status * code define corresponding to the Windows error code. * - \%Rhrf - Takes a COM/XPCOM status code as argument. Will insert the * full description of the specified status code. * - \%Rhra - Takes a COM/XPCOM error code as argument. Will insert the * error code define + full description. * * - \%Rfn - Pretty printing of a function or method. It drops the * return code and parameter list. * - \%Rbn - Prints the base name. For dropping the path in * order to save space when printing a path name. * * - \%lRbs - Same as \%ls except inlut is big endian UTF-16. * * On other platforms, \%Rw? simply prints the argument in a form of 0xXXXXXXXX. * * * Group 4, structure dumpers: * - \%RDtimespec - Takes a PCRTTIMESPEC. * * * Group 5, XML / HTML escapers: * - \%RMas - Takes a string pointer (const char *) and outputs * it as an attribute value with the proper escaping. * This typically ends up in double quotes. * * - \%RMes - Takes a string pointer (const char *) and outputs * it as an element with the necessary escaping. * * Group 6, CPU Architecture Register dumpers: * - \%RAx86[reg] - Takes a 64-bit register value if the register is * 64-bit or smaller. Check the code wrt which * registers are implemented. * */ #ifndef DECLARED_FNRTSTROUTPUT /* duplicated in iprt/log.h */ # define DECLARED_FNRTSTROUTPUT /** * Output callback. * * @returns number of bytes written. * @param pvArg User argument. * @param pachChars Pointer to an array of utf-8 characters. * @param cbChars Number of bytes in the character array pointed to by pachChars. */ typedef DECLCALLBACK(size_t) FNRTSTROUTPUT(void *pvArg, const char *pachChars, size_t cbChars); /** Pointer to callback function. */ typedef FNRTSTROUTPUT *PFNRTSTROUTPUT; #endif /** @name Format flag. * These are used by RTStrFormat extensions and RTStrFormatNumber, mind * that not all flags makes sense to both of the functions. * @{ */ #define RTSTR_F_CAPITAL 0x0001 #define RTSTR_F_LEFT 0x0002 #define RTSTR_F_ZEROPAD 0x0004 #define RTSTR_F_SPECIAL 0x0008 #define RTSTR_F_VALSIGNED 0x0010 #define RTSTR_F_PLUS 0x0020 #define RTSTR_F_BLANK 0x0040 #define RTSTR_F_WIDTH 0x0080 #define RTSTR_F_PRECISION 0x0100 #define RTSTR_F_THOUSAND_SEP 0x0200 #define RTSTR_F_OBFUSCATE_PTR 0x0400 #define RTSTR_F_BIT_MASK 0xf800 #define RTSTR_F_8BIT 0x0800 #define RTSTR_F_16BIT 0x1000 #define RTSTR_F_32BIT 0x2000 #define RTSTR_F_64BIT 0x4000 #define RTSTR_F_128BIT 0x8000 /** @} */ /** @def RTSTR_GET_BIT_FLAG * Gets the bit flag for the specified type. */ #define RTSTR_GET_BIT_FLAG(type) \ ( sizeof(type) * 8 == 32 ? RTSTR_F_32BIT \ : sizeof(type) * 8 == 64 ? RTSTR_F_64BIT \ : sizeof(type) * 8 == 16 ? RTSTR_F_16BIT \ : sizeof(type) * 8 == 8 ? RTSTR_F_8BIT \ : sizeof(type) * 8 == 128 ? RTSTR_F_128BIT \ : 0) /** * Callback to format non-standard format specifiers. * * @returns The number of bytes formatted. * @param pvArg Formatter argument. * @param pfnOutput Pointer to output function. * @param pvArgOutput Argument for the output function. * @param ppszFormat Pointer to the format string pointer. Advance this till the char * after the format specifier. * @param pArgs Pointer to the argument list. Use this to fetch the arguments. * @param cchWidth Format Width. -1 if not specified. * @param cchPrecision Format Precision. -1 if not specified. * @param fFlags Flags (RTSTR_NTFS_*). * @param chArgSize The argument size specifier, 'l' or 'L'. */ typedef DECLCALLBACK(size_t) FNSTRFORMAT(void *pvArg, PFNRTSTROUTPUT pfnOutput, void *pvArgOutput, const char **ppszFormat, va_list *pArgs, int cchWidth, int cchPrecision, unsigned fFlags, char chArgSize); /** Pointer to a FNSTRFORMAT() function. */ typedef FNSTRFORMAT *PFNSTRFORMAT; /** * Partial implementation of a printf like formatter. * It doesn't do everything correct, and there is no floating point support. * However, it supports custom formats by the means of a format callback. * * @returns number of bytes formatted. * @param pfnOutput Output worker. * Called in two ways. Normally with a string and its length. * For termination, it's called with NULL for string, 0 for length. * @param pvArgOutput Argument to the output worker. * @param pfnFormat Custom format worker. * @param pvArgFormat Argument to the format worker. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param InArgs Argument list. */ RTDECL(size_t) RTStrFormatV(PFNRTSTROUTPUT pfnOutput, void *pvArgOutput, PFNSTRFORMAT pfnFormat, void *pvArgFormat, const char *pszFormat, va_list InArgs) RT_IPRT_FORMAT_ATTR(5, 0); /** * Partial implementation of a printf like formatter. * * It doesn't do everything correct, and there is no floating point support. * However, it supports custom formats by the means of a format callback. * * @returns number of bytes formatted. * @param pfnOutput Output worker. * Called in two ways. Normally with a string and its length. * For termination, it's called with NULL for string, 0 for length. * @param pvArgOutput Argument to the output worker. * @param pfnFormat Custom format worker. * @param pvArgFormat Argument to the format worker. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param ... Argument list. */ RTDECL(size_t) RTStrFormat(PFNRTSTROUTPUT pfnOutput, void *pvArgOutput, PFNSTRFORMAT pfnFormat, void *pvArgFormat, const char *pszFormat, ...) RT_IPRT_FORMAT_ATTR(5, 6); /** * Formats an integer number according to the parameters. * * @returns Length of the formatted number. * @param psz Pointer to output string buffer of sufficient size. * @param u64Value Value to format. * @param uiBase Number representation base. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. */ RTDECL(int) RTStrFormatNumber(char *psz, uint64_t u64Value, unsigned int uiBase, signed int cchWidth, signed int cchPrecision, unsigned int fFlags); /** * Formats an unsigned 8-bit number. * * @returns The length of the formatted number or VERR_BUFFER_OVERFLOW. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. * @param u8Value The value to format. * @param uiBase Number representation base. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. */ RTDECL(ssize_t) RTStrFormatU8(char *pszBuf, size_t cbBuf, uint8_t u8Value, unsigned int uiBase, signed int cchWidth, signed int cchPrecision, uint32_t fFlags); /** * Formats an unsigned 16-bit number. * * @returns The length of the formatted number or VERR_BUFFER_OVERFLOW. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. * @param u16Value The value to format. * @param uiBase Number representation base. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. */ RTDECL(ssize_t) RTStrFormatU16(char *pszBuf, size_t cbBuf, uint16_t u16Value, unsigned int uiBase, signed int cchWidth, signed int cchPrecision, uint32_t fFlags); /** * Formats an unsigned 32-bit number. * * @returns The length of the formatted number or VERR_BUFFER_OVERFLOW. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. * @param u32Value The value to format. * @param uiBase Number representation base. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. */ RTDECL(ssize_t) RTStrFormatU32(char *pszBuf, size_t cbBuf, uint32_t u32Value, unsigned int uiBase, signed int cchWidth, signed int cchPrecision, uint32_t fFlags); /** * Formats an unsigned 64-bit number. * * @returns The length of the formatted number or VERR_BUFFER_OVERFLOW. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. * @param u64Value The value to format. * @param uiBase Number representation base. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. */ RTDECL(ssize_t) RTStrFormatU64(char *pszBuf, size_t cbBuf, uint64_t u64Value, unsigned int uiBase, signed int cchWidth, signed int cchPrecision, uint32_t fFlags); /** * Formats an unsigned 128-bit number. * * @returns The length of the formatted number or VERR_BUFFER_OVERFLOW. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. * @param pu128Value The value to format. * @param uiBase Number representation base. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. * @remarks The current implementation is limited to base 16 and doesn't do * width or precision and probably ignores few flags too. */ RTDECL(ssize_t) RTStrFormatU128(char *pszBuf, size_t cbBuf, PCRTUINT128U pu128Value, unsigned int uiBase, signed int cchWidth, signed int cchPrecision, uint32_t fFlags); /** * Formats an unsigned 256-bit number. * * @returns The length of the formatted number or VERR_BUFFER_OVERFLOW. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. * @param pu256Value The value to format. * @param uiBase Number representation base. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. * @remarks The current implementation is limited to base 16 and doesn't do * width or precision and probably ignores few flags too. */ RTDECL(ssize_t) RTStrFormatU256(char *pszBuf, size_t cbBuf, PCRTUINT256U pu256Value, unsigned int uiBase, signed int cchWidth, signed int cchPrecision, uint32_t fFlags); /** * Formats an unsigned 512-bit number. * * @returns The length of the formatted number or VERR_BUFFER_OVERFLOW. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. * @param pu512Value The value to format. * @param uiBase Number representation base. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. * @remarks The current implementation is limited to base 16 and doesn't do * width or precision and probably ignores few flags too. */ RTDECL(ssize_t) RTStrFormatU512(char *pszBuf, size_t cbBuf, PCRTUINT512U pu512Value, unsigned int uiBase, signed int cchWidth, signed int cchPrecision, uint32_t fFlags); /** * Formats an 80-bit extended floating point number. * * @returns The length of the formatted number or VERR_BUFFER_OVERFLOW. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. * @param pr80Value The value to format. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. */ RTDECL(ssize_t) RTStrFormatR80(char *pszBuf, size_t cbBuf, PCRTFLOAT80U pr80Value, signed int cchWidth, signed int cchPrecision, uint32_t fFlags); /** * Formats an 80-bit extended floating point number, version 2. * * @returns The length of the formatted number or VERR_BUFFER_OVERFLOW. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. * @param pr80Value The value to format. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags, RTSTR_F_XXX. */ RTDECL(ssize_t) RTStrFormatR80u2(char *pszBuf, size_t cbBuf, PCRTFLOAT80U2 pr80Value, signed int cchWidth, signed int cchPrecision, uint32_t fFlags); /** * Callback for formatting a type. * * This is registered using the RTStrFormatTypeRegister function and will * be called during string formatting to handle the specified %R[type]. * The argument for this format type is assumed to be a pointer and it's * passed in the @a pvValue argument. * * @returns Length of the formatted output. * @param pfnOutput Output worker. * @param pvArgOutput Argument to the output worker. * @param pszType The type name. * @param pvValue The argument value. * @param cchWidth Width. * @param cchPrecision Precision. * @param fFlags Flags (NTFS_*). * @param pvUser The user argument. */ typedef DECLCALLBACK(size_t) FNRTSTRFORMATTYPE(PFNRTSTROUTPUT pfnOutput, void *pvArgOutput, const char *pszType, void const *pvValue, int cchWidth, int cchPrecision, unsigned fFlags, void *pvUser); /** Pointer to a FNRTSTRFORMATTYPE. */ typedef FNRTSTRFORMATTYPE *PFNRTSTRFORMATTYPE; /** * Register a format handler for a type. * * The format handler is used to handle '%R[type]' format types, where the argument * in the vector is a pointer value (a bit restrictive, but keeps it simple). * * The caller must ensure that no other thread will be making use of any of * the dynamic formatting type facilities simultaneously with this call. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_ALREADY_EXISTS if the type has already been registered. * @retval VERR_TOO_MANY_OPEN_FILES if all the type slots has been allocated already. * * @param pszType The type name. * @param pfnHandler The handler address. See FNRTSTRFORMATTYPE for details. * @param pvUser The user argument to pass to the handler. See RTStrFormatTypeSetUser * for how to update this later. */ RTDECL(int) RTStrFormatTypeRegister(const char *pszType, PFNRTSTRFORMATTYPE pfnHandler, void *pvUser); /** * Deregisters a format type. * * The caller must ensure that no other thread will be making use of any of * the dynamic formatting type facilities simultaneously with this call. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_FILE_NOT_FOUND if not found. * * @param pszType The type to deregister. */ RTDECL(int) RTStrFormatTypeDeregister(const char *pszType); /** * Sets the user argument for a type. * * This can be used if a user argument needs relocating in GC. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_FILE_NOT_FOUND if not found. * * @param pszType The type to update. * @param pvUser The new user argument value. */ RTDECL(int) RTStrFormatTypeSetUser(const char *pszType, void *pvUser); /** * String printf. * * @returns The length of the returned string (in pszBuffer) excluding the * terminator. * @param pszBuffer Output buffer. * @param cchBuffer Size of the output buffer. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param args The format argument. * * @deprecated Use RTStrPrintf2V! Problematic return value on overflow. */ RTDECL(size_t) RTStrPrintfV(char *pszBuffer, size_t cchBuffer, const char *pszFormat, va_list args) RT_IPRT_FORMAT_ATTR(3, 0); /** * String printf. * * @returns The length of the returned string (in pszBuffer) excluding the * terminator. * @param pszBuffer Output buffer. * @param cchBuffer Size of the output buffer. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param ... The format argument. * * @deprecated Use RTStrPrintf2! Problematic return value on overflow. */ RTDECL(size_t) RTStrPrintf(char *pszBuffer, size_t cchBuffer, const char *pszFormat, ...) RT_IPRT_FORMAT_ATTR(3, 4); /** * String printf with custom formatting. * * @returns The length of the returned string (in pszBuffer) excluding the * terminator. * @param pfnFormat Pointer to handler function for the custom formats. * @param pvArg Argument to the pfnFormat function. * @param pszBuffer Output buffer. * @param cchBuffer Size of the output buffer. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param args The format argument. * * @deprecated Use RTStrPrintf2ExV! Problematic return value on overflow. */ RTDECL(size_t) RTStrPrintfExV(PFNSTRFORMAT pfnFormat, void *pvArg, char *pszBuffer, size_t cchBuffer, const char *pszFormat, va_list args) RT_IPRT_FORMAT_ATTR(5, 0); /** * String printf with custom formatting. * * @returns The length of the returned string (in pszBuffer) excluding the * terminator. * @param pfnFormat Pointer to handler function for the custom formats. * @param pvArg Argument to the pfnFormat function. * @param pszBuffer Output buffer. * @param cchBuffer Size of the output buffer. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param ... The format argument. * * @deprecated Use RTStrPrintf2Ex! Problematic return value on overflow. */ RTDECL(size_t) RTStrPrintfEx(PFNSTRFORMAT pfnFormat, void *pvArg, char *pszBuffer, size_t cchBuffer, const char *pszFormat, ...) RT_IPRT_FORMAT_ATTR(5, 6); /** * String printf, version 2. * * @returns On success, positive count of formatted character excluding the * terminator. On buffer overflow, negative number giving the required * buffer size (including terminator char). * * @param pszBuffer Output buffer. * @param cbBuffer Size of the output buffer. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param args The format argument. */ RTDECL(ssize_t) RTStrPrintf2V(char *pszBuffer, size_t cbBuffer, const char *pszFormat, va_list args) RT_IPRT_FORMAT_ATTR(3, 0); /** * String printf, version 2. * * @returns On success, positive count of formatted character excluding the * terminator. On buffer overflow, negative number giving the required * buffer size (including terminator char). * * @param pszBuffer Output buffer. * @param cbBuffer Size of the output buffer. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param ... The format argument. */ RTDECL(ssize_t) RTStrPrintf2(char *pszBuffer, size_t cbBuffer, const char *pszFormat, ...) RT_IPRT_FORMAT_ATTR(3, 4); /** * String printf with custom formatting, version 2. * * @returns On success, positive count of formatted character excluding the * terminator. On buffer overflow, negative number giving the required * buffer size (including terminator char). * * @param pfnFormat Pointer to handler function for the custom formats. * @param pvArg Argument to the pfnFormat function. * @param pszBuffer Output buffer. * @param cbBuffer Size of the output buffer. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param args The format argument. */ RTDECL(ssize_t) RTStrPrintf2ExV(PFNSTRFORMAT pfnFormat, void *pvArg, char *pszBuffer, size_t cbBuffer, const char *pszFormat, va_list args) RT_IPRT_FORMAT_ATTR(5, 0); /** * String printf with custom formatting, version 2. * * @returns On success, positive count of formatted character excluding the * terminator. On buffer overflow, negative number giving the required * buffer size (including terminator char). * * @param pfnFormat Pointer to handler function for the custom formats. * @param pvArg Argument to the pfnFormat function. * @param pszBuffer Output buffer. * @param cbBuffer Size of the output buffer. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param ... The format argument. */ RTDECL(ssize_t) RTStrPrintf2Ex(PFNSTRFORMAT pfnFormat, void *pvArg, char *pszBuffer, size_t cbBuffer, const char *pszFormat, ...) RT_IPRT_FORMAT_ATTR(5, 6); /** * Allocating string printf (default tag). * * @returns The length of the string in the returned *ppszBuffer excluding the * terminator. * @returns -1 on failure. * @param ppszBuffer Where to store the pointer to the allocated output buffer. * The buffer should be freed using RTStrFree(). * On failure *ppszBuffer will be set to NULL. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param args The format argument. */ #define RTStrAPrintfV(ppszBuffer, pszFormat, args) RTStrAPrintfVTag((ppszBuffer), (pszFormat), (args), RTSTR_TAG) /** * Allocating string printf (custom tag). * * @returns The length of the string in the returned *ppszBuffer excluding the * terminator. * @returns -1 on failure. * @param ppszBuffer Where to store the pointer to the allocated output buffer. * The buffer should be freed using RTStrFree(). * On failure *ppszBuffer will be set to NULL. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param args The format argument. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(int) RTStrAPrintfVTag(char **ppszBuffer, const char *pszFormat, va_list args, const char *pszTag) RT_IPRT_FORMAT_ATTR(2, 0); /** * Allocating string printf. * * @returns The length of the string in the returned *ppszBuffer excluding the * terminator. * @returns -1 on failure. * @param ppszBuffer Where to store the pointer to the allocated output buffer. * The buffer should be freed using RTStrFree(). * On failure *ppszBuffer will be set to NULL. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param ... The format argument. */ DECLINLINE(int) RT_IPRT_FORMAT_ATTR(2, 3) RTStrAPrintf(char **ppszBuffer, const char *pszFormat, ...) { int cbRet; va_list va; va_start(va, pszFormat); cbRet = RTStrAPrintfVTag(ppszBuffer, pszFormat, va, RTSTR_TAG); va_end(va); return cbRet; } /** * Allocating string printf (custom tag). * * @returns The length of the string in the returned *ppszBuffer excluding the * terminator. * @returns -1 on failure. * @param ppszBuffer Where to store the pointer to the allocated output buffer. * The buffer should be freed using RTStrFree(). * On failure *ppszBuffer will be set to NULL. * @param pszTag Allocation tag used for statistics and such. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param ... The format argument. */ DECLINLINE(int) RT_IPRT_FORMAT_ATTR(3, 4) RTStrAPrintfTag(char **ppszBuffer, const char *pszTag, const char *pszFormat, ...) { int cbRet; va_list va; va_start(va, pszFormat); cbRet = RTStrAPrintfVTag(ppszBuffer, pszFormat, va, pszTag); va_end(va); return cbRet; } /** * Allocating string printf, version 2. * * @returns Formatted string. Use RTStrFree() to free it. NULL when out of * memory. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param args The format argument. */ #define RTStrAPrintf2V(pszFormat, args) RTStrAPrintf2VTag((pszFormat), (args), RTSTR_TAG) /** * Allocating string printf, version 2. * * @returns Formatted string. Use RTStrFree() to free it. NULL when out of * memory. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param args The format argument. * @param pszTag Allocation tag used for statistics and such. */ RTDECL(char *) RTStrAPrintf2VTag(const char *pszFormat, va_list args, const char *pszTag) RT_IPRT_FORMAT_ATTR(1, 0); /** * Allocating string printf, version 2 (default tag). * * @returns Formatted string. Use RTStrFree() to free it. NULL when out of * memory. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param ... The format argument. */ DECLINLINE(char *) RT_IPRT_FORMAT_ATTR(1, 2) RTStrAPrintf2(const char *pszFormat, ...) { char *pszRet; va_list va; va_start(va, pszFormat); pszRet = RTStrAPrintf2VTag(pszFormat, va, RTSTR_TAG); va_end(va); return pszRet; } /** * Allocating string printf, version 2 (custom tag). * * @returns Formatted string. Use RTStrFree() to free it. NULL when out of * memory. * @param pszTag Allocation tag used for statistics and such. * @param pszFormat Pointer to the format string, @see pg_rt_str_format. * @param ... The format argument. */ DECLINLINE(char *) RT_IPRT_FORMAT_ATTR(2, 3) RTStrAPrintf2Tag(const char *pszTag, const char *pszFormat, ...) { char *pszRet; va_list va; va_start(va, pszFormat); pszRet = RTStrAPrintf2VTag(pszFormat, va, pszTag); va_end(va); return pszRet; } /** * Strips blankspaces from both ends of the string. * * @returns Pointer to first non-blank char in the string. * @param psz The string to strip. */ RTDECL(char *) RTStrStrip(char *psz); /** * Strips blankspaces from the start of the string. * * @returns Pointer to first non-blank char in the string. * @param psz The string to strip. */ RTDECL(char *) RTStrStripL(const char *psz); /** * Strips blankspaces from the end of the string. * * @returns psz. * @param psz The string to strip. */ RTDECL(char *) RTStrStripR(char *psz); /** * String copy with overflow handling. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the destination buffer is too small. The * buffer will contain as much of the string as it can hold, fully * terminated. * * @param pszDst The destination buffer. * @param cbDst The size of the destination buffer (in bytes). * @param pszSrc The source string. NULL is not OK. */ RTDECL(int) RTStrCopy(char *pszDst, size_t cbDst, const char *pszSrc); /** * String copy with overflow handling. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the destination buffer is too small. The * buffer will contain as much of the string as it can hold, fully * terminated. * * @param pszDst The destination buffer. * @param cbDst The size of the destination buffer (in bytes). * @param pszSrc The source string. NULL is not OK. * @param cchSrcMax The maximum number of chars (not code points) to * copy from the source string, not counting the * terminator as usual. */ RTDECL(int) RTStrCopyEx(char *pszDst, size_t cbDst, const char *pszSrc, size_t cchSrcMax); /** * String copy with overflow handling and buffer advancing. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the destination buffer is too small. The * buffer will contain as much of the string as it can hold, fully * terminated. * * @param ppszDst Pointer to the destination buffer pointer. * This will be advanced to the end of the copied * bytes (points at the terminator). This is also * updated on overflow. * @param pcbDst Pointer to the destination buffer size * variable. This will be updated in accord with * the buffer pointer. * @param pszSrc The source string. NULL is not OK. */ RTDECL(int) RTStrCopyP(char **ppszDst, size_t *pcbDst, const char *pszSrc); /** * String copy with overflow handling. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the destination buffer is too small. The * buffer will contain as much of the string as it can hold, fully * terminated. * * @param ppszDst Pointer to the destination buffer pointer. * This will be advanced to the end of the copied * bytes (points at the terminator). This is also * updated on overflow. * @param pcbDst Pointer to the destination buffer size * variable. This will be updated in accord with * the buffer pointer. * @param pszSrc The source string. NULL is not OK. * @param cchSrcMax The maximum number of chars (not code points) to * copy from the source string, not counting the * terminator as usual. */ RTDECL(int) RTStrCopyPEx(char **ppszDst, size_t *pcbDst, const char *pszSrc, size_t cchSrcMax); /** * String concatenation with overflow handling. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the destination buffer is too small. The * buffer will contain as much of the string as it can hold, fully * terminated. * * @param pszDst The destination buffer. * @param cbDst The size of the destination buffer (in bytes). * @param pszSrc The source string. NULL is not OK. */ RTDECL(int) RTStrCat(char *pszDst, size_t cbDst, const char *pszSrc); /** * String concatenation with overflow handling. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the destination buffer is too small. The * buffer will contain as much of the string as it can hold, fully * terminated. * * @param pszDst The destination buffer. * @param cbDst The size of the destination buffer (in bytes). * @param pszSrc The source string. NULL is not OK. * @param cchSrcMax The maximum number of chars (not code points) to * copy from the source string, not counting the * terminator as usual. */ RTDECL(int) RTStrCatEx(char *pszDst, size_t cbDst, const char *pszSrc, size_t cchSrcMax); /** * String concatenation with overflow handling. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the destination buffer is too small. The * buffer will contain as much of the string as it can hold, fully * terminated. * * @param ppszDst Pointer to the destination buffer pointer. * This will be advanced to the end of the copied * bytes (points at the terminator). This is also * updated on overflow. * @param pcbDst Pointer to the destination buffer size * variable. This will be updated in accord with * the buffer pointer. * @param pszSrc The source string. NULL is not OK. */ RTDECL(int) RTStrCatP(char **ppszDst, size_t *pcbDst, const char *pszSrc); /** * String concatenation with overflow handling and buffer advancing. * * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the destination buffer is too small. The * buffer will contain as much of the string as it can hold, fully * terminated. * * @param ppszDst Pointer to the destination buffer pointer. * This will be advanced to the end of the copied * bytes (points at the terminator). This is also * updated on overflow. * @param pcbDst Pointer to the destination buffer size * variable. This will be updated in accord with * the buffer pointer. * @param pszSrc The source string. NULL is not OK. * @param cchSrcMax The maximum number of chars (not code points) to * copy from the source string, not counting the * terminator as usual. */ RTDECL(int) RTStrCatPEx(char **ppszDst, size_t *pcbDst, const char *pszSrc, size_t cchSrcMax); /** * Performs a case sensitive string compare between two UTF-8 strings. * * Encoding errors are ignored by the current implementation. So, the only * difference between this and the CRT strcmp function is the handling of * NULL arguments. * * @returns < 0 if the first string less than the second string. * @returns 0 if the first string identical to the second string. * @returns > 0 if the first string greater than the second string. * @param psz1 First UTF-8 string. Null is allowed. * @param psz2 Second UTF-8 string. Null is allowed. */ RTDECL(int) RTStrCmp(const char *psz1, const char *psz2); /** * Performs a case sensitive string compare between two UTF-8 strings, given * a maximum string length. * * Encoding errors are ignored by the current implementation. So, the only * difference between this and the CRT strncmp function is the handling of * NULL arguments. * * @returns < 0 if the first string less than the second string. * @returns 0 if the first string identical to the second string. * @returns > 0 if the first string greater than the second string. * @param psz1 First UTF-8 string. Null is allowed. * @param psz2 Second UTF-8 string. Null is allowed. * @param cchMax The maximum string length */ RTDECL(int) RTStrNCmp(const char *psz1, const char *psz2, size_t cchMax); /** * Performs a case insensitive string compare between two UTF-8 strings. * * This is a simplified compare, as only the simplified lower/upper case folding * specified by the unicode specs are used. It does not consider character pairs * as they are used in some languages, just simple upper & lower case compares. * * The result is the difference between the mismatching codepoints after they * both have been lower cased. * * If the string encoding is invalid the function will assert (strict builds) * and use RTStrCmp for the remainder of the string. * * @returns < 0 if the first string less than the second string. * @returns 0 if the first string identical to the second string. * @returns > 0 if the first string greater than the second string. * @param psz1 First UTF-8 string. Null is allowed. * @param psz2 Second UTF-8 string. Null is allowed. */ RTDECL(int) RTStrICmp(const char *psz1, const char *psz2); /** * Performs a case insensitive string compare between two UTF-8 strings, given a * maximum string length. * * This is a simplified compare, as only the simplified lower/upper case folding * specified by the unicode specs are used. It does not consider character pairs * as they are used in some languages, just simple upper & lower case compares. * * The result is the difference between the mismatching codepoints after they * both have been lower cased. * * If the string encoding is invalid the function will assert (strict builds) * and use RTStrCmp for the remainder of the string. * * @returns < 0 if the first string less than the second string. * @returns 0 if the first string identical to the second string. * @returns > 0 if the first string greater than the second string. * @param psz1 First UTF-8 string. Null is allowed. * @param psz2 Second UTF-8 string. Null is allowed. * @param cchMax Maximum string length */ RTDECL(int) RTStrNICmp(const char *psz1, const char *psz2, size_t cchMax); /** * Performs a case insensitive string compare between a UTF-8 string and a 7-bit * ASCII string. * * This is potentially faster than RTStrICmp and drags in less dependencies. It * is really handy for hardcoded inputs. * * If the string encoding is invalid the function will assert (strict builds) * and use RTStrCmp for the remainder of the string. * * @returns < 0 if the first string less than the second string. * @returns 0 if the first string identical to the second string. * @returns > 0 if the first string greater than the second string. * @param psz1 First UTF-8 string. Null is allowed. * @param psz2 Second string, 7-bit ASCII. Null is allowed. * @sa RTUtf16ICmpAscii */ RTDECL(int) RTStrICmpAscii(const char *psz1, const char *psz2); /** * Checks whether @a pszString starts with @a pszStart. * * @returns true / false. * @param pszString The string to check. * @param pszStart The start string to check for. */ RTDECL(int) RTStrStartsWith(const char *pszString, const char *pszStart); /** * Checks whether @a pszString starts with @a pszStart, case insensitive. * * @returns true / false. * @param pszString The string to check. * @param pszStart The start string to check for. */ RTDECL(int) RTStrIStartsWith(const char *pszString, const char *pszStart); /** * Locates a case sensitive substring. * * If any of the two strings are NULL, then NULL is returned. If the needle is * an empty string, then the haystack is returned (i.e. matches anything). * * @returns Pointer to the first occurrence of the substring if found, NULL if * not. * * @param pszHaystack The string to search. * @param pszNeedle The substring to search for. * * @remarks The difference between this and strstr is the handling of NULL * pointers. */ RTDECL(char *) RTStrStr(const char *pszHaystack, const char *pszNeedle); /** * Locates a case insensitive substring. * * If any of the two strings are NULL, then NULL is returned. If the needle is * an empty string, then the haystack is returned (i.e. matches anything). * * @returns Pointer to the first occurrence of the substring if found, NULL if * not. * * @param pszHaystack The string to search. * @param pszNeedle The substring to search for. * */ RTDECL(char *) RTStrIStr(const char *pszHaystack, const char *pszNeedle); /** * Converts the string to lower case. * * @returns Pointer to the converted string. * @param psz The string to convert. */ RTDECL(char *) RTStrToLower(char *psz); /** * Converts the string to upper case. * * @returns Pointer to the converted string. * @param psz The string to convert. */ RTDECL(char *) RTStrToUpper(char *psz); /** * Checks if the string is case foldable, i.e. whether it would change if * subject to RTStrToLower or RTStrToUpper. * * @returns true / false * @param psz The string in question. */ RTDECL(bool) RTStrIsCaseFoldable(const char *psz); /** * Checks if the string is upper cased (no lower case chars in it). * * @returns true / false * @param psz The string in question. */ RTDECL(bool) RTStrIsUpperCased(const char *psz); /** * Checks if the string is lower cased (no upper case chars in it). * * @returns true / false * @param psz The string in question. */ RTDECL(bool) RTStrIsLowerCased(const char *psz); /** * Find the length of a zero-terminated byte string, given * a max string length. * * See also RTStrNLenEx. * * @returns The string length or cbMax. The returned length does not include * the zero terminator if it was found. * * @param pszString The string. * @param cchMax The max string length. */ RTDECL(size_t) RTStrNLen(const char *pszString, size_t cchMax); /** * Find the length of a zero-terminated byte string, given * a max string length. * * See also RTStrNLen. * * @returns IPRT status code. * @retval VINF_SUCCESS if the string has a length less than cchMax. * @retval VERR_BUFFER_OVERFLOW if the end of the string wasn't found * before cchMax was reached. * * @param pszString The string. * @param cchMax The max string length. * @param pcch Where to store the string length excluding the * terminator. This is set to cchMax if the terminator * isn't found. */ RTDECL(int) RTStrNLenEx(const char *pszString, size_t cchMax, size_t *pcch); RT_C_DECLS_END /** The maximum size argument of a memchr call. */ #define RTSTR_MEMCHR_MAX ((~(size_t)0 >> 1) - 15) /** * Find the zero terminator in a string with a limited length. * * @returns Pointer to the zero terminator. * @returns NULL if the zero terminator was not found. * * @param pszString The string. * @param cchMax The max string length. RTSTR_MAX is fine. */ #if defined(__cplusplus) && !defined(DOXYGEN_RUNNING) DECLINLINE(char const *) RTStrEnd(char const *pszString, size_t cchMax) { /* Avoid potential issues with memchr seen in glibc. * See sysdeps/x86_64/memchr.S in glibc versions older than 2.11 */ while (cchMax > RTSTR_MEMCHR_MAX) { char const *pszRet = (char const *)memchr(pszString, '\0', RTSTR_MEMCHR_MAX); if (RT_LIKELY(pszRet)) return pszRet; pszString += RTSTR_MEMCHR_MAX; cchMax -= RTSTR_MEMCHR_MAX; } return (char const *)memchr(pszString, '\0', cchMax); } DECLINLINE(char *) RTStrEnd(char *pszString, size_t cchMax) #else DECLINLINE(char *) RTStrEnd(const char *pszString, size_t cchMax) #endif { /* Avoid potential issues with memchr seen in glibc. * See sysdeps/x86_64/memchr.S in glibc versions older than 2.11 */ while (cchMax > RTSTR_MEMCHR_MAX) { char *pszRet = (char *)memchr(pszString, '\0', RTSTR_MEMCHR_MAX); if (RT_LIKELY(pszRet)) return pszRet; pszString += RTSTR_MEMCHR_MAX; cchMax -= RTSTR_MEMCHR_MAX; } return (char *)memchr(pszString, '\0', cchMax); } RT_C_DECLS_BEGIN /** * Finds the offset at which a simple character first occurs in a string. * * @returns The offset of the first occurence or the terminator offset. * @param pszHaystack The string to search. * @param chNeedle The character to search for. */ DECLINLINE(size_t) RTStrOffCharOrTerm(const char *pszHaystack, char chNeedle) { const char *psz = pszHaystack; char ch; while ( (ch = *psz) != chNeedle && ch != '\0') psz++; return psz - pszHaystack; } /** * Matches a simple string pattern. * * @returns true if the string matches the pattern, otherwise false. * * @param pszPattern The pattern. Special chars are '*' and '?', where the * asterisk matches zero or more characters and question * mark matches exactly one character. * @param pszString The string to match against the pattern. */ RTDECL(bool) RTStrSimplePatternMatch(const char *pszPattern, const char *pszString); /** * Matches a simple string pattern, neither which needs to be zero terminated. * * This is identical to RTStrSimplePatternMatch except that you can optionally * specify the length of both the pattern and the string. The function will * stop when it hits a string terminator or either of the lengths. * * @returns true if the string matches the pattern, otherwise false. * * @param pszPattern The pattern. Special chars are '*' and '?', where the * asterisk matches zero or more characters and question * mark matches exactly one character. * @param cchPattern The pattern length. Pass RTSTR_MAX if you don't know the * length and wish to stop at the string terminator. * @param pszString The string to match against the pattern. * @param cchString The string length. Pass RTSTR_MAX if you don't know the * length and wish to match up to the string terminator. */ RTDECL(bool) RTStrSimplePatternNMatch(const char *pszPattern, size_t cchPattern, const char *pszString, size_t cchString); /** * Matches multiple patterns against a string. * * The patterns are separated by the pipe character (|). * * @returns true if the string matches the pattern, otherwise false. * * @param pszPatterns The patterns. * @param cchPatterns The lengths of the patterns to use. Pass RTSTR_MAX to * stop at the terminator. * @param pszString The string to match against the pattern. * @param cchString The string length. Pass RTSTR_MAX stop stop at the * terminator. * @param poffPattern Offset into the patterns string of the patttern that * matched. If no match, this will be set to RTSTR_MAX. * This is optional, NULL is fine. */ RTDECL(bool) RTStrSimplePatternMultiMatch(const char *pszPatterns, size_t cchPatterns, const char *pszString, size_t cchString, size_t *poffPattern); /** * Compares two version strings RTStrICmp fashion. * * The version string is split up into sections at punctuation, spaces, * underscores, dashes and plus signs. The sections are then split up into * numeric and string sub-sections. Finally, the sub-sections are compared * in a numeric or case insesntivie fashion depending on what they are. * * The following strings are considered to be equal: "1.0.0", "1.00.0", "1.0", * "1". These aren't: "1.0.0r993", "1.0", "1.0r993", "1.0_Beta3", "1.1" * * @returns < 0 if the first string less than the second string. * @returns 0 if the first string identical to the second string. * @returns > 0 if the first string greater than the second string. * * @param pszVer1 First version string to compare. * @param pszVer2 Second version string to compare first version with. */ RTDECL(int) RTStrVersionCompare(const char *pszVer1, const char *pszVer2); /** @defgroup rt_str_conv String To/From Number Conversions * @{ */ /** * Converts a string representation of a number to a 64-bit unsigned number. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_NEGATIVE_UNSIGNED * @retval VWRN_TRAILING_CHARS * @retval VWRN_TRAILING_SPACES * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param ppszNext Where to store the pointer to the first char following the number. (Optional) * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pu64 Where to store the converted number. (optional) */ RTDECL(int) RTStrToUInt64Ex(const char *pszValue, char **ppszNext, unsigned uBase, uint64_t *pu64); /** * Converts a string representation of a number to a 64-bit unsigned number, * making sure the full string is converted. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_NEGATIVE_UNSIGNED * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * @retval VERR_TRAILING_SPACES * @retval VERR_TRAILING_CHARS * * @param pszValue Pointer to the string value. * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pu64 Where to store the converted number. (optional) */ RTDECL(int) RTStrToUInt64Full(const char *pszValue, unsigned uBase, uint64_t *pu64); /** * Converts a string representation of a number to a 64-bit unsigned number. * The base is guessed. * * @returns 64-bit unsigned number on success. * @returns 0 on failure. * @param pszValue Pointer to the string value. */ RTDECL(uint64_t) RTStrToUInt64(const char *pszValue); /** * Converts a string representation of a number to a 32-bit unsigned number. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_NEGATIVE_UNSIGNED * @retval VWRN_TRAILING_CHARS * @retval VWRN_TRAILING_SPACES * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param ppszNext Where to store the pointer to the first char following the number. (Optional) * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pu32 Where to store the converted number. (optional) */ RTDECL(int) RTStrToUInt32Ex(const char *pszValue, char **ppszNext, unsigned uBase, uint32_t *pu32); /** * Converts a string representation of a number to a 32-bit unsigned number, * making sure the full string is converted. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_NEGATIVE_UNSIGNED * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * @retval VERR_TRAILING_SPACES * @retval VERR_TRAILING_CHARS * * @param pszValue Pointer to the string value. * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pu32 Where to store the converted number. (optional) */ RTDECL(int) RTStrToUInt32Full(const char *pszValue, unsigned uBase, uint32_t *pu32); /** * Converts a string representation of a number to a 64-bit unsigned number. * The base is guessed. * * @returns 32-bit unsigned number on success. * @returns 0 on failure. * @param pszValue Pointer to the string value. */ RTDECL(uint32_t) RTStrToUInt32(const char *pszValue); /** * Converts a string representation of a number to a 16-bit unsigned number. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_NEGATIVE_UNSIGNED * @retval VWRN_TRAILING_CHARS * @retval VWRN_TRAILING_SPACES * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param ppszNext Where to store the pointer to the first char following the number. (Optional) * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pu16 Where to store the converted number. (optional) */ RTDECL(int) RTStrToUInt16Ex(const char *pszValue, char **ppszNext, unsigned uBase, uint16_t *pu16); /** * Converts a string representation of a number to a 16-bit unsigned number, * making sure the full string is converted. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_NEGATIVE_UNSIGNED * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * @retval VERR_TRAILING_SPACES * @retval VERR_TRAILING_CHARS * * @param pszValue Pointer to the string value. * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pu16 Where to store the converted number. (optional) */ RTDECL(int) RTStrToUInt16Full(const char *pszValue, unsigned uBase, uint16_t *pu16); /** * Converts a string representation of a number to a 16-bit unsigned number. * The base is guessed. * * @returns 16-bit unsigned number on success. * @returns 0 on failure. * @param pszValue Pointer to the string value. */ RTDECL(uint16_t) RTStrToUInt16(const char *pszValue); /** * Converts a string representation of a number to a 8-bit unsigned number. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_NEGATIVE_UNSIGNED * @retval VWRN_TRAILING_CHARS * @retval VWRN_TRAILING_SPACES * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param ppszNext Where to store the pointer to the first char following the number. (Optional) * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pu8 Where to store the converted number. (optional) */ RTDECL(int) RTStrToUInt8Ex(const char *pszValue, char **ppszNext, unsigned uBase, uint8_t *pu8); /** * Converts a string representation of a number to a 8-bit unsigned number, * making sure the full string is converted. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_NEGATIVE_UNSIGNED * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * @retval VERR_TRAILING_SPACES * @retval VERR_TRAILING_CHARS * * @param pszValue Pointer to the string value. * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pu8 Where to store the converted number. (optional) */ RTDECL(int) RTStrToUInt8Full(const char *pszValue, unsigned uBase, uint8_t *pu8); /** * Converts a string representation of a number to a 8-bit unsigned number. * The base is guessed. * * @returns 8-bit unsigned number on success. * @returns 0 on failure. * @param pszValue Pointer to the string value. */ RTDECL(uint8_t) RTStrToUInt8(const char *pszValue); /** * Converts a string representation of a number to a 64-bit signed number. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_TRAILING_CHARS * @retval VWRN_TRAILING_SPACES * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param ppszNext Where to store the pointer to the first char following the number. (Optional) * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pi64 Where to store the converted number. (optional) */ RTDECL(int) RTStrToInt64Ex(const char *pszValue, char **ppszNext, unsigned uBase, int64_t *pi64); /** * Converts a string representation of a number to a 64-bit signed number, * making sure the full string is converted. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VINF_SUCCESS * @retval VERR_TRAILING_CHARS * @retval VERR_TRAILING_SPACES * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pi64 Where to store the converted number. (optional) */ RTDECL(int) RTStrToInt64Full(const char *pszValue, unsigned uBase, int64_t *pi64); /** * Converts a string representation of a number to a 64-bit signed number. * The base is guessed. * * @returns 64-bit signed number on success. * @returns 0 on failure. * @param pszValue Pointer to the string value. */ RTDECL(int64_t) RTStrToInt64(const char *pszValue); /** * Converts a string representation of a number to a 32-bit signed number. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_TRAILING_CHARS * @retval VWRN_TRAILING_SPACES * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param ppszNext Where to store the pointer to the first char following the number. (Optional) * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pi32 Where to store the converted number. (optional) */ RTDECL(int) RTStrToInt32Ex(const char *pszValue, char **ppszNext, unsigned uBase, int32_t *pi32); /** * Converts a string representation of a number to a 32-bit signed number, * making sure the full string is converted. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VINF_SUCCESS * @retval VERR_TRAILING_CHARS * @retval VERR_TRAILING_SPACES * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pi32 Where to store the converted number. (optional) */ RTDECL(int) RTStrToInt32Full(const char *pszValue, unsigned uBase, int32_t *pi32); /** * Converts a string representation of a number to a 32-bit signed number. * The base is guessed. * * @returns 32-bit signed number on success. * @returns 0 on failure. * @param pszValue Pointer to the string value. */ RTDECL(int32_t) RTStrToInt32(const char *pszValue); /** * Converts a string representation of a number to a 16-bit signed number. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_TRAILING_CHARS * @retval VWRN_TRAILING_SPACES * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param ppszNext Where to store the pointer to the first char following the number. (Optional) * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pi16 Where to store the converted number. (optional) */ RTDECL(int) RTStrToInt16Ex(const char *pszValue, char **ppszNext, unsigned uBase, int16_t *pi16); /** * Converts a string representation of a number to a 16-bit signed number, * making sure the full string is converted. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VINF_SUCCESS * @retval VERR_TRAILING_CHARS * @retval VERR_TRAILING_SPACES * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pi16 Where to store the converted number. (optional) */ RTDECL(int) RTStrToInt16Full(const char *pszValue, unsigned uBase, int16_t *pi16); /** * Converts a string representation of a number to a 16-bit signed number. * The base is guessed. * * @returns 16-bit signed number on success. * @returns 0 on failure. * @param pszValue Pointer to the string value. */ RTDECL(int16_t) RTStrToInt16(const char *pszValue); /** * Converts a string representation of a number to a 8-bit signed number. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VWRN_TRAILING_CHARS * @retval VWRN_TRAILING_SPACES * @retval VINF_SUCCESS * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param ppszNext Where to store the pointer to the first char following the number. (Optional) * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pi8 Where to store the converted number. (optional) */ RTDECL(int) RTStrToInt8Ex(const char *pszValue, char **ppszNext, unsigned uBase, int8_t *pi8); /** * Converts a string representation of a number to a 8-bit signed number, * making sure the full string is converted. * * @returns iprt status code. * Warnings are used to indicate conversion problems. * @retval VWRN_NUMBER_TOO_BIG * @retval VINF_SUCCESS * @retval VERR_TRAILING_CHARS * @retval VERR_TRAILING_SPACES * @retval VERR_NO_DIGITS * * @param pszValue Pointer to the string value. * @param uBase The base of the representation used. * If 0 the function will look for known prefixes before defaulting to 10. * @param pi8 Where to store the converted number. (optional) */ RTDECL(int) RTStrToInt8Full(const char *pszValue, unsigned uBase, int8_t *pi8); /** * Converts a string representation of a number to a 8-bit signed number. * The base is guessed. * * @returns 8-bit signed number on success. * @returns 0 on failure. * @param pszValue Pointer to the string value. */ RTDECL(int8_t) RTStrToInt8(const char *pszValue); /** * Formats a buffer stream as hex bytes. * * The default is no separating spaces or line breaks or anything. * * @returns IPRT status code. * @retval VERR_INVALID_POINTER if any of the pointers are wrong. * @retval VERR_BUFFER_OVERFLOW if the buffer is insufficent to hold the bytes. * * @param pszBuf Output string buffer. * @param cbBuf The size of the output buffer. * @param pv Pointer to the bytes to stringify. * @param cb The number of bytes to stringify. * @param fFlags Combination of RTSTRPRINTHEXBYTES_F_XXX values. * @sa RTUtf16PrintHexBytes. */ RTDECL(int) RTStrPrintHexBytes(char *pszBuf, size_t cbBuf, void const *pv, size_t cb, uint32_t fFlags); /** @name RTSTRPRINTHEXBYTES_F_XXX - flags for RTStrPrintHexBytes and RTUtf16PritnHexBytes. * @{ */ /** Upper case hex digits, the default is lower case. */ #define RTSTRPRINTHEXBYTES_F_UPPER RT_BIT(0) /** Add a space between each group. */ #define RTSTRPRINTHEXBYTES_F_SEP_SPACE RT_BIT(1) /** Add a colon between each group. */ #define RTSTRPRINTHEXBYTES_F_SEP_COLON RT_BIT(2) /** @} */ /** * Converts a string of hex bytes back into binary data. * * @returns IPRT status code. * @retval VERR_INVALID_POINTER if any of the pointers are wrong. * @retval VERR_BUFFER_OVERFLOW if the string contains too many hex bytes. * @retval VERR_BUFFER_UNDERFLOW if there aren't enough hex bytes to fill up * the output buffer. * @retval VERR_UNEVEN_INPUT if the input contains a half byte. * @retval VERR_NO_DIGITS * @retval VWRN_TRAILING_CHARS * @retval VWRN_TRAILING_SPACES * * @param pszHex The string containing the hex bytes. * @param pv Output buffer. * @param cb The size of the output buffer. * @param fFlags Must be zero, reserved for future use. */ RTDECL(int) RTStrConvertHexBytes(char const *pszHex, void *pv, size_t cb, uint32_t fFlags); /** @} */ /** @defgroup rt_str_space Unique String Space * @{ */ /** Pointer to a string name space container node core. */ typedef struct RTSTRSPACECORE *PRTSTRSPACECORE; /** Pointer to a pointer to a string name space container node core. */ typedef PRTSTRSPACECORE *PPRTSTRSPACECORE; /** * String name space container node core. */ typedef struct RTSTRSPACECORE { /** Hash key. Don't touch. */ uint32_t Key; /** Pointer to the left leaf node. Don't touch. */ PRTSTRSPACECORE pLeft; /** Pointer to the left right node. Don't touch. */ PRTSTRSPACECORE pRight; /** Pointer to the list of string with the same key. Don't touch. */ PRTSTRSPACECORE pList; /** Height of this tree: max(heigth(left), heigth(right)) + 1. Don't touch */ unsigned char uchHeight; /** The string length. Read only! */ size_t cchString; /** Pointer to the string. Read only! */ const char *pszString; } RTSTRSPACECORE; /** String space. (Initialize with NULL.) */ typedef PRTSTRSPACECORE RTSTRSPACE; /** Pointer to a string space. */ typedef PPRTSTRSPACECORE PRTSTRSPACE; /** * Inserts a string into a unique string space. * * @returns true on success. * @returns false if the string collided with an existing string. * @param pStrSpace The space to insert it into. * @param pStr The string node. */ RTDECL(bool) RTStrSpaceInsert(PRTSTRSPACE pStrSpace, PRTSTRSPACECORE pStr); /** * Removes a string from a unique string space. * * @returns Pointer to the removed string node. * @returns NULL if the string was not found in the string space. * @param pStrSpace The space to remove it from. * @param pszString The string to remove. */ RTDECL(PRTSTRSPACECORE) RTStrSpaceRemove(PRTSTRSPACE pStrSpace, const char *pszString); /** * Gets a string from a unique string space. * * @returns Pointer to the string node. * @returns NULL if the string was not found in the string space. * @param pStrSpace The space to get it from. * @param pszString The string to get. */ RTDECL(PRTSTRSPACECORE) RTStrSpaceGet(PRTSTRSPACE pStrSpace, const char *pszString); /** * Gets a string from a unique string space. * * @returns Pointer to the string node. * @returns NULL if the string was not found in the string space. * @param pStrSpace The space to get it from. * @param pszString The string to get. * @param cchMax The max string length to evaluate. Passing * RTSTR_MAX is ok and makes it behave just like * RTStrSpaceGet. */ RTDECL(PRTSTRSPACECORE) RTStrSpaceGetN(PRTSTRSPACE pStrSpace, const char *pszString, size_t cchMax); /** * Callback function for RTStrSpaceEnumerate() and RTStrSpaceDestroy(). * * @returns 0 on continue. * @returns Non-zero to aborts the operation. * @param pStr The string node * @param pvUser The user specified argument. */ typedef DECLCALLBACK(int) FNRTSTRSPACECALLBACK(PRTSTRSPACECORE pStr, void *pvUser); /** Pointer to callback function for RTStrSpaceEnumerate() and RTStrSpaceDestroy(). */ typedef FNRTSTRSPACECALLBACK *PFNRTSTRSPACECALLBACK; /** * Destroys the string space. * * The caller supplies a callback which will be called for each of the string * nodes in for freeing their memory and other resources. * * @returns 0 or what ever non-zero return value pfnCallback returned * when aborting the destruction. * @param pStrSpace The space to destroy. * @param pfnCallback The callback. * @param pvUser The user argument. */ RTDECL(int) RTStrSpaceDestroy(PRTSTRSPACE pStrSpace, PFNRTSTRSPACECALLBACK pfnCallback, void *pvUser); /** * Enumerates the string space. * The caller supplies a callback which will be called for each of * the string nodes. * * @returns 0 or what ever non-zero return value pfnCallback returned * when aborting the destruction. * @param pStrSpace The space to enumerate. * @param pfnCallback The callback. * @param pvUser The user argument. */ RTDECL(int) RTStrSpaceEnumerate(PRTSTRSPACE pStrSpace, PFNRTSTRSPACECALLBACK pfnCallback, void *pvUser); /** @} */ /** @defgroup rt_str_hash Sting hashing * @{ */ /** * Hashes the given string using algorithm \#1. * * @returns String hash. * @param pszString The string to hash. */ RTDECL(uint32_t) RTStrHash1(const char *pszString); /** * Hashes the given string using algorithm \#1. * * @returns String hash. * @param pszString The string to hash. * @param cchString The max length to hash. Hashing will stop if the * terminator character is encountered first. Passing * RTSTR_MAX is fine. */ RTDECL(uint32_t) RTStrHash1N(const char *pszString, size_t cchString); /** * Hashes the given strings as if they were concatenated using algorithm \#1. * * @returns String hash. * @param cPairs The number of string / length pairs in the * ellipsis. * @param ... List of string (const char *) and length * (size_t) pairs. Passing RTSTR_MAX as the size is * fine. */ RTDECL(uint32_t) RTStrHash1ExN(size_t cPairs, ...); /** * Hashes the given strings as if they were concatenated using algorithm \#1. * * @returns String hash. * @param cPairs The number of string / length pairs in the @a va. * @param va List of string (const char *) and length * (size_t) pairs. Passing RTSTR_MAX as the size is * fine. */ RTDECL(uint32_t) RTStrHash1ExNV(size_t cPairs, va_list va); /** @} */ /** @} */ RT_C_DECLS_END #endif