/** @file * IPRT - Tar archive I/O. */ /* * Copyright (C) 2009-2010 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_tar_h #define ___iprt_tar_h #include #include #include RT_C_DECLS_BEGIN /** @defgroup grp_rt_tar RTTar - Tar archive I/O * @ingroup grp_rt * @{ */ /** A tar handle */ typedef R3PTRTYPE(struct RTTARINTERNAL *) RTTAR; /** Pointer to a RTTAR interface handle. */ typedef RTTAR *PRTTAR; /** Nil RTTAR interface handle. */ #define NIL_RTTAR ((RTTAR)0) /** A tar file handle */ typedef R3PTRTYPE(struct RTTARFILEINTERNAL *) RTTARFILE; /** Pointer to a RTTARFILE interface handle. */ typedef RTTARFILE *PRTTARFILE; /** Nil RTTARFILE interface handle. */ #define NIL_RTTARFILE ((RTTARFILE)0) /** * Opens a Tar archive. * * Use the mask to specify the access type. In create mode the target file * have not to exists. * * @returns IPRT status code. * * @param phTar Where to store the RTTAR handle. * @param pszTarname The file name of the tar archive to open. * @param fMode Open flags, i.e a combination of the RTFILE_O_* defines. * The ACCESS, ACTION and DENY flags are mandatory! * @param fStream Open the file in stream mode. Within this mode no * seeking is allowed. Use this together with * RTTarFileCurrent, RTTarFileOpenCurrent, * RTTarFileSeekNextFile and the read method to * sequential read a tar file. Currently ignored with * RTFILE_O_WRITE. */ RTR3DECL(int) RTTarOpen(PRTTAR phTar, const char *pszTarname, uint32_t fMode, bool fStream); #if 0 /** * Opens a Tar archive by handle. * * Use the mask to specify the access type. In create mode the target file * have not to exists. * * @returns IPRT status code. * * @param phTar Where to store the RTTAR handle. * @param hFile The file handle of the tar file. This is expected * to be a regular file at the moment. * @param fStream Open the file in stream mode. Within this mode no * seeking is allowed. Use this together with * RTTarFileCurrent, RTTarFileOpenCurrent, * RTTarFileSeekNextFile and the read method to * sequential read a tar file. Currently ignored with * RTFILE_O_WRITE. */ RTR3DECL(int) RTTarOpenByHandle(PRTTAR phTar, RTFILE hFile, uint32_t fMode, bool fStream); #endif /** * Close the Tar archive. * * @returns IPRT status code. * * @param hTar Handle to the RTTAR interface. */ RTR3DECL(int) RTTarClose(RTTAR hTar); /** * Open a file in the Tar archive. * * @returns IPRT status code. * * @param hTar The handle of the tar archive. * @param phFile Where to store the handle to the opened file. * @param pszFilename Path to the file which is to be opened. (UTF-8) * @param fOpen Open flags, i.e a combination of the RTFILE_O_* defines. * The ACCESS, ACTION flags are mandatory! DENY flags * are currently not supported. * * @remarks Write mode means append mode only. It is not possible to make * changes to existing files. * * @remarks Currently it is not possible to open more than one file in write * mode. Although open more than one file in read only mode (even when * one file is opened in write mode) is always possible. */ RTR3DECL(int) RTTarFileOpen(RTTAR hTar, PRTTARFILE phFile, const char *pszFilename, uint32_t fOpen); /** * Close the file opened by RTTarFileOpen. * * @returns IPRT status code. * * @param hFile The file handle to close. */ RTR3DECL(int) RTTarFileClose(RTTARFILE hFile); /** * Changes the read & write position in a file. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param offSeek Offset to seek. * @param uMethod Seek method, i.e. one of the RTFILE_SEEK_* defines. * @param poffActual Where to store the new file position. * NULL is allowed. */ RTR3DECL(int) RTTarFileSeek(RTTARFILE hFile, uint64_t offSeek, unsigned uMethod, uint64_t *poffActual); /** * Gets the current file position. * * @returns File offset. * @returns UINT64_MAX on failure. * * @param hFile Handle to the file. */ RTR3DECL(uint64_t) RTTarFileTell(RTTARFILE hFile); /** * Read bytes from a file. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param pvBuf Where to put the bytes we read. * @param cbToRead How much to read. * @param *pcbRead How much we actually read . * If NULL an error will be returned for a partial read. */ RTR3DECL(int) RTTarFileRead(RTTARFILE hFile, void *pvBuf, size_t cbToRead, size_t *pcbRead); /** * Read bytes from a file at a given offset. * This function may modify the file position. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param off Where to read. * @param pvBuf Where to put the bytes we read. * @param cbToRead How much to read. * @param *pcbRead How much we actually read . * If NULL an error will be returned for a partial read. */ RTR3DECL(int) RTTarFileReadAt(RTTARFILE hFile, uint64_t off, void *pvBuf, size_t cbToRead, size_t *pcbRead); /** * Write bytes to a file. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param pvBuf What to write. * @param cbToWrite How much to write. * @param *pcbWritten How much we actually wrote. * If NULL an error will be returned for a partial write. */ RTR3DECL(int) RTTarFileWrite(RTTARFILE hFile, const void *pvBuf, size_t cbToWrite, size_t *pcbWritten); /** * Write bytes to a file at a given offset. * This function may modify the file position. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param off Where to write. * @param pvBuf What to write. * @param cbToWrite How much to write. * @param *pcbWritten How much we actually wrote. * If NULL an error will be returned for a partial write. */ RTR3DECL(int) RTTarFileWriteAt(RTTARFILE hFile, uint64_t off, const void *pvBuf, size_t cbToWrite, size_t *pcbWritten); /** * Query the size of the file. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param pcbSize Where to store the filesize. */ RTR3DECL(int) RTTarFileGetSize(RTTARFILE hFile, uint64_t *pcbSize); /** * Set the size of the file. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param cbSize The new file size. */ RTR3DECL(int) RTTarFileSetSize(RTTARFILE hFile, uint64_t cbSize); /** * Gets the mode flags of an open file. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param pfMode Where to store the file mode, see @ref grp_rt_fs for details. */ RTR3DECL(int) RTTarFileGetMode(RTTARFILE hFile, uint32_t *pfMode); /** * Changes the mode flags of an open file. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param fMode The new file mode, see @ref grp_rt_fs for details. */ RTR3DECL(int) RTTarFileSetMode(RTTARFILE hFile, uint32_t fMode); /** * Gets the modification timestamp of the file. * * @returns IPRT status code. * * @param pFile Handle to the file. * @param pTime Where to store the time. */ RTR3DECL(int) RTTarFileGetTime(RTTARFILE hFile, PRTTIMESPEC pTime); /** * Sets the modification timestamp of the file. * * @returns IPRT status code. * * @param pFile Handle to the file. * @param pTime The time to store. */ RTR3DECL(int) RTTarFileSetTime(RTTARFILE hFile, PRTTIMESPEC pTime); /** * Gets the owner and/or group of an open file. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param pUid Where to store the owner user id. NULL is ok. * @param pGid Where to store the group id. NULL is ok. */ RTR3DECL(int) RTTarFileGetOwner(RTTARFILE hFile, uint32_t *pUid, uint32_t *pGid); /** * Changes the owner and/or group of an open file. * * @returns IPRT status code. * * @param hFile Handle to the file. * @param uid The new file owner user id. Use -1 (or ~0) to leave this unchanged. * @param gid The new group id. Use -1 (or ~0) to leave this unchanged. */ RTR3DECL(int) RTTarFileSetOwner(RTTARFILE hFile, uint32_t uid, uint32_t gid); /****************************************************************************** * Convenience Functions * ******************************************************************************/ /** * Check if the specified file exists in the Tar archive. * * (The matching is case sensitive.) * * @note Currently only regular files are supported. * * @returns IPRT status code. * @retval VINF_SUCCESS when the file exists in the Tar archive. * @retval VERR_FILE_NOT_FOUND when the file not exists in the Tar archive. * * @param pszTarFile Tar file to check. * @param pszFile Filename to check for. * * @todo This is predicate function which SHALL return bool! */ RTR3DECL(int) RTTarFileExists(const char *pszTarFile, const char *pszFile); /** * Create a file list from a Tar archive. * * @note Currently only regular files are supported. * * @returns IPRT status code. * * @param pszTarFile Tar file to list files from. * @param ppapszFiles On success an array with array with the filenames is * returned. The names must be freed with RTStrFree and * the array with RTMemFree. * @param pcFiles On success the number of entries in ppapszFiles. */ RTR3DECL(int) RTTarList(const char *pszTarFile, char ***ppapszFiles, size_t *pcFiles); /** * Extract a file from a Tar archive into a memory buffer. * * The caller is responsible for the deletion of the returned memory buffer. * * (The matching is case sensitive.) * * @note Currently only regular files are supported. Also some of the header * fields are not used (uid, gid, uname, gname, mtime). * * @returns IPRT status code. * * @param pszTarFile Tar file to extract files from. * @param ppBuf The buffer which will held the extracted data. * @param pcbSize The size (in bytes) of ppBuf after successful * extraction. * @param pszFile The file to extract. * @param pfnProgressCallback Progress callback function. Optional. * @param pvUser User defined data for the progress * callback. Optional. */ RTR3DECL(int) RTTarExtractFileToBuf(const char *pszTarFile, void **ppvBuf, size_t *pcbSize, const char *pszFile, PFNRTPROGRESS pfnProgressCallback, void *pvUser); /** * Extract a set of files from a Tar archive. * * Also note that this function is atomic. If an error occurs all previously * extracted files will be deleted. * * (The matching is case sensitive.) * * @note Currently only regular files are supported. Also some of the header * fields are not used (uid, gid, uname, gname, mtime). * * @returns IPRT status code. * * @param pszTarFile Tar file to extract files from. * @param pszOutputDir Where to store the extracted files. Must exist. * @param papszFiles Which files should be extracted. * @param cFiles The number of files in papszFiles. * @param pfnProgressCallback Progress callback function. Optional. * @param pvUser User defined data for the progress * callback. Optional. */ RTR3DECL(int) RTTarExtractFiles(const char *pszTarFile, const char *pszOutputDir, const char * const *papszFiles, size_t cFiles, PFNRTPROGRESS pfnProgressCallback, void *pvUser); /** * Extract all files of the archive. * * @note Currently only regular files are supported. Also some of the header * fields are not used (uid, gid, uname, gname, mtime). * * @returns IPRT status code. * * @param pszTarFile Tar file to extract the files from. * @param pszOutputDir Where to store the extracted files. Must exist. * @param pfnProgressCallback Progress callback function. Optional. * @param pvUser User defined data for the progress * callback. Optional. */ RTR3DECL(int) RTTarExtractAll(const char *pszTarFile, const char *pszOutputDir, PFNRTPROGRESS pfnProgressCallback, void *pvUser); /** * Create a Tar archive out of the given files. * * @note Currently only regular files are supported. * * @returns IPRT status code. * * @param pszTarFile Where to create the Tar archive. * @param papszFiles Which files should be included. * @param cFiles The number of files in papszFiles. * @param pfnProgressCallback Progress callback function. Optional. * @param pvUser User defined data for the progress * callback. Optional. */ RTR3DECL(int) RTTarCreate(const char *pszTarFile, const char * const *papszFiles, size_t cFiles, PFNRTPROGRESS pfnProgressCallback, void *pvUser); /****************************************************************************** * Streaming Functions * ******************************************************************************/ /** * Return the filename where RTTar currently stays at. * * @returns IPRT status code. * * @param hTar Handle to the RTTAR interface. * @param ppszFilename On success the filename. */ RTR3DECL(int) RTTarCurrentFile(RTTAR hTar, char **ppszFilename); /** * Jumps to the next file from the current RTTar position. * * @returns IPRT status code. * * @param hTar Handle to the RTTAR interface. */ RTR3DECL(int) RTTarSeekNextFile(RTTAR hTar); /** * Opens the file where RTTar currently stays at. * * @returns IPRT status code. * * @param hTar Handle to the RTTAR interface. * @param phFile Where to store the handle to the opened file. * @param ppszFilename On success the filename. * @param fOpen Open flags, i.e a combination of the RTFILE_O_* defines. * The ACCESS, ACTION flags are mandatory! Currently * only RTFILE_O_OPEN | RTFILE_O_READ is supported. */ RTR3DECL(int) RTTarFileOpenCurrentFile(RTTAR hTar, PRTTARFILE phFile, char **ppszFilename, uint32_t fOpen); /** @} */ RT_C_DECLS_END #endif /* ___iprt_tar_h */