/** @file * IPRT - TCP/IP. */ /* * Copyright (C) 2006-2010 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_tcp_h #define ___iprt_tcp_h #include #include #include #include #include #include #ifdef IN_RING0 # error "There are no RTFile APIs available Ring-0 Host Context!" #endif RT_C_DECLS_BEGIN /** @defgroup grp_rt_tcp RTTcp - TCP/IP * @ingroup grp_rt * @{ */ /** * Serve a TCP Server connection. * * @returns iprt status code. * @returns VERR_TCP_SERVER_STOP to terminate the server loop forcing * the RTTcpCreateServer() call to return. * @param Sock The socket which the client is connected to. * The call will close this socket. * @param pvUser User argument. */ typedef DECLCALLBACK(int) FNRTTCPSERVE(RTSOCKET Sock, void *pvUser); /** Pointer to a RTTCPSERVE(). */ typedef FNRTTCPSERVE *PFNRTTCPSERVE; /** * Create single connection at a time TCP Server in a separate thread. * * The thread will loop accepting connections and call pfnServe for * each of the incoming connections in turn. The pfnServe function can * return VERR_TCP_SERVER_STOP too terminate this loop. RTTcpServerDestroy() * should be used to terminate the server. * * @returns iprt status code. * @param pszAddress The address for creating a listening socket. * If NULL or empty string the server is bound to all interfaces. * @param uPort The port for creating a listening socket. * @param enmType The thread type. * @param pszThrdName The name of the worker thread. * @param pfnServe The function which will serve a new client connection. * @param pvUser User argument passed to pfnServe. * @param ppServer Where to store the serverhandle. */ RTR3DECL(int) RTTcpServerCreate(const char *pszAddress, unsigned uPort, RTTHREADTYPE enmType, const char *pszThrdName, PFNRTTCPSERVE pfnServe, void *pvUser, PPRTTCPSERVER ppServer); /** * Create single connection at a time TCP Server. * The caller must call RTTcpServerListen() to actually start the server. * * @returns iprt status code. * @param pszAddress The address for creating a listening socket. * If NULL the server is bound to all interfaces. * @param uPort The port for creating a listening socket. * @param ppServer Where to store the serverhandle. */ RTR3DECL(int) RTTcpServerCreateEx(const char *pszAddress, uint32_t uPort, PPRTTCPSERVER ppServer); /** * Closes down and frees a TCP Server. * This will also terminate any open connections to the server. * * @returns iprt status code. * @param pServer Handle to the server. */ RTR3DECL(int) RTTcpServerDestroy(PRTTCPSERVER pServer); /** * Listen for incoming connections. * * The function will loop accepting connections and call pfnServe for * each of the incoming connections in turn. The pfnServe function can * return VERR_TCP_SERVER_STOP too terminate this loop. A stopped server * can only be destroyed. * * @returns iprt status code. * @param pServer The server handle as returned from RTTcpServerCreateEx(). * @param pfnServe The function which will serve a new client connection. * @param pvUser User argument passed to pfnServe. */ RTR3DECL(int) RTTcpServerListen(PRTTCPSERVER pServer, PFNRTTCPSERVE pfnServe, void *pvUser); /** * Listen and accept one incomming connection. * * This is an alternative to RTTcpServerListen for the use the callbacks are not * possible. * * @returns IPRT status code. * @retval VERR_TCP_SERVER_SHUTDOWN if shut down by RTTcpServerShutdown. * @retval VERR_INTERRUPTED if the listening was interrupted. * * @param pServer The server handle as returned from RTTcpServerCreateEx(). * @param phClientSocket Where to return the socket handle to the client * connection (on success only). This must be closed * by calling RTTcpServerDisconnectClient2(). */ RTR3DECL(int) RTTcpServerListen2(PRTTCPSERVER pServer, PRTSOCKET phClientSocket); /** * Terminate the open connection to the server. * * @returns iprt status code. * @param pServer Handle to the server. */ RTR3DECL(int) RTTcpServerDisconnectClient(PRTTCPSERVER pServer); /** * Terminates an open client connect when using RTTcpListen2 * * @returns IPRT status code. * @param hClientSocket The client socket handle. This will be invalid upon * return, whether successful or not. NIL is quietly * ignored (VINF_SUCCESS). */ RTR3DECL(int) RTTcpServerDisconnectClient2(RTSOCKET hClientSocket); /** * Shuts down the server, leaving client connections open. * * @returns IPRT status code. * @param pServer Handle to the server. */ RTR3DECL(int) RTTcpServerShutdown(PRTTCPSERVER pServer); /** * Connect (as a client) to a TCP Server. * * @returns iprt status code. * @param pszAddress The address to connect to. * @param uPort The port to connect to. * @param pSock Where to store the handle to the established connection. */ RTR3DECL(int) RTTcpClientConnect(const char *pszAddress, uint32_t uPort, PRTSOCKET pSock); /** * Close a socket returned by RTTcpClientConnect(). * * @returns iprt status code. * @param Sock Socket descriptor. */ RTR3DECL(int) RTTcpClientClose(RTSOCKET Sock); /** * Receive data from a socket. * * @returns iprt status code. * @param Sock Socket descriptor. * @param pvBuffer Where to put the data we read. * @param cbBuffer Read buffer size. * @param pcbRead Number of bytes read. * If NULL the entire buffer will be filled upon successful return. * If not NULL a partial read can be done successfully. */ RTR3DECL(int) RTTcpRead(RTSOCKET Sock, void *pvBuffer, size_t cbBuffer, size_t *pcbRead); /** * Send data to a socket. * * @returns iprt status code. * @retval VERR_INTERRUPTED if interrupted before anything was written. * * @param Sock Socket descriptor. * @param pvBuffer Buffer to write data to socket. * @param cbBuffer How much to write. */ RTR3DECL(int) RTTcpWrite(RTSOCKET Sock, const void *pvBuffer, size_t cbBuffer); /** * Flush socket write buffers. * * @returns iprt status code. * @param Sock Socket descriptor. */ RTR3DECL(int) RTTcpFlush(RTSOCKET Sock); /** * Enables or disables delaying sends to coalesce packets. * * The TCP/IP stack usually uses the Nagle algorithm (RFC 896) to implement the * coalescing. * * @returns iprt status code. * @param Sock Socket descriptor. * @param fEnable When set to true enables coalescing. */ RTR3DECL(int) RTTcpSetSendCoalescing(RTSOCKET Sock, bool fEnable); /** * Socket I/O multiplexing. * Checks if the socket is ready for reading. * * @returns iprt status code. * @param Sock Socket descriptor. * @param cMillies Number of milliseconds to wait for the socket. * Use RT_INDEFINITE_WAIT to wait for ever. */ RTR3DECL(int) RTTcpSelectOne(RTSOCKET Sock, RTMSINTERVAL cMillies); /** * Socket I/O multiplexing * Checks if the socket is ready for one of the given events. * * @returns iprt status code. * @param Sock Socket descriptor. * @param fEvents Event mask to wait for. * Use the RTSOCKET_EVT_* defines. * @param pfEvents Where to store the event mask on return. * @param cMillies Number of milliseconds to wait for the socket. * Use RT_INDEFINITE_WAIT to wait for ever. */ RTR3DECL(int) RTTcpSelectOneEx(RTSOCKET Sock, uint32_t fEvents, uint32_t *pfEvents, RTMSINTERVAL cMillies); #if 0 /* skipping these for now - RTTcpServer* handles this. */ /** * Listen for connection on a socket. * * @returns iprt status code. * @param Sock Socket descriptor. * @param cBackLog The maximum length the queue of pending connections * may grow to. */ RTR3DECL(int) RTTcpListen(RTSOCKET Sock, int cBackLog); /** * Accept a connection on a socket. * * @returns iprt status code. * @param Sock Socket descriptor. * @param uPort The port for accepting connection. * @param pSockAccepted Where to store the handle to the accepted connection. */ RTR3DECL(int) RTTcpAccept(RTSOCKET Sock, unsigned uPort, PRTSOCKET pSockAccepted); #endif /** * Gets the address of the local side. * * @returns IPRT status code. * @param Sock Socket descriptor. * @param pAddr Where to store the local address on success. */ RTR3DECL(int) RTTcpGetLocalAddress(RTSOCKET Sock, PRTNETADDR pAddr); /** * Gets the address of the other party. * * @returns IPRT status code. * @param Sock Socket descriptor. * @param pAddr Where to store the peer address on success. */ RTR3DECL(int) RTTcpGetPeerAddress(RTSOCKET Sock, PRTNETADDR pAddr); /** * Send data from a scatter/gather buffer to a socket. * * @returns iprt status code. * @retval VERR_INTERRUPTED if interrupted before anything was written. * * @param Sock Socket descriptor. * @param pSgBuf Scatter/gather buffer to write data to socket. */ RTR3DECL(int) RTTcpSgWrite(RTSOCKET Sock, PCRTSGBUF pSgBuf); /** * Send data from multiple buffers to a socket. * * This is convenience wrapper around the RTSocketSgWrite and RTSgBufInit calls * for lazy coders. The "L" in the function name is short for "list" just like * in the execl libc API. * * @returns IPRT status code. * @retval VERR_INTERRUPTED if interrupted before anything was written. * * @param hSocket The socket handle. * @param cSegs The number of data segments in the following * ellipsis. * @param ... Pairs of buffer pointers (void const *) and buffer * sizes (size_t). Make 101% sure the pointer is * really size_t. */ RTR3DECL(int) RTTcpSgWriteL(RTSOCKET hSocket, size_t cSegs, ...); /** * Send data from multiple buffers to a socket. * * This is convenience wrapper around the RTSocketSgWrite and RTSgBufInit calls * for lazy coders. The "L" in the function name is short for "list" just like * in the execl libc API. * * @returns IPRT status code. * @retval VERR_INTERRUPTED if interrupted before anything was written. * * @param hSocket The socket handle. * @param cSegs The number of data segments in the following * argument list. * @param va Pairs of buffer pointers (void const *) and buffer * sizes (size_t). Make 101% sure the pointer is * really size_t. */ RTR3DECL(int) RTTcpSgWriteLV(RTSOCKET hSocket, size_t cSegs, va_list va); /** * Receive data from a socket. * * This version doesn't block if there is no data on the socket. * * @returns IPRT status code. * * @param Sock Socket descriptor. * @param pvBuffer Where to put the data we read. * @param cbBuffer Read buffer size. * @param pcbRead Number of bytes read. */ RTR3DECL(int) RTTcpReadNB(RTSOCKET Sock, void *pvBuffer, size_t cbBuffer, size_t *pcbRead); /** * Send data to a socket. * * This version doesn't block if there is not enough room for the message. * * @returns IPRT status code. * * @param Sock Socket descriptor. * @param pvBuffer Buffer to write data to socket. * @param cbBuffer How much to write. * @param pcbWritten Number of bytes written. */ RTR3DECL(int) RTTcpWriteNB(RTSOCKET Sock, const void *pvBuffer, size_t cbBuffer, size_t *pcbWritten); /** * Send data from a scatter/gather buffer to a socket. * * This version doesn't block if there is not enough room for the message. * * @returns iprt status code. * @retval VERR_INTERRUPTED if interrupted before anything was written. * * @param Sock Socket descriptor. * @param pSgBuf Scatter/gather buffer to write data to socket. * @param pcbWritten Number of bytes written. */ RTR3DECL(int) RTTcpSgWriteNB(RTSOCKET Sock, PCRTSGBUF pSgBuf, size_t *pcbWritten); /** * Send data from multiple buffers to a socket. * * This version doesn't block if there is not enough room for the message. * This is convenience wrapper around the RTSocketSgWrite and RTSgBufInit calls * for lazy coders. The "L" in the function name is short for "list" just like * in the execl libc API. * * @returns IPRT status code. * * @param hSocket The socket handle. * @param cSegs The number of data segments in the following * ellipsis. * @param pcbWritten Number of bytes written. * @param ... Pairs of buffer pointers (void const *) and buffer * sizes (size_t). Make 101% sure the pointer is * really size_t. */ RTR3DECL(int) RTTcpSgWriteLNB(RTSOCKET hSocket, size_t cSegs, size_t *pcbWritten, ...); /** * Send data from multiple buffers to a socket. * * This version doesn't block if there is not enough room for the message. * This is convenience wrapper around the RTSocketSgWrite and RTSgBufInit calls * for lazy coders. The "L" in the function name is short for "list" just like * in the execl libc API. * * @returns IPRT status code. * * @param hSocket The socket handle. * @param cSegs The number of data segments in the following * argument list. * @param pcbWritten Number of bytes written. * @param va Pairs of buffer pointers (void const *) and buffer * sizes (size_t). Make 101% sure the pointer is * really size_t. */ RTR3DECL(int) RTTcpSgWriteLVNB(RTSOCKET hSocket, size_t cSegs, size_t *pcbWritten, va_list va); /** @} */ RT_C_DECLS_END #endif