/** @file * IPRT - Time. */ /* * Copyright (C) 2006-2012 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_time_h #define ___iprt_time_h #include #include RT_C_DECLS_BEGIN /** @defgroup grp_rt_time RTTime - Time * @ingroup grp_rt * @{ */ /** Time Specification. * * Use the inline RTTimeSpecGet/Set to operate on structure this so we * can easily change the representation if required later. * * The current representation is in nanoseconds relative to the unix epoch * (1970-01-01 00:00:00 UTC). This gives us an approximate span from * 1678 to 2262 without sacrificing the resolution offered by the various * host OSes (BSD & LINUX 1ns, NT 100ns). */ typedef struct RTTIMESPEC { /** Nanoseconds since epoch. * The name is intentially too long to be comfortable to use because you should be * using inline helpers! */ int64_t i64NanosecondsRelativeToUnixEpoch; } RTTIMESPEC; /** @name RTTIMESPEC methods * @{ */ /** * Gets the time as nanoseconds relative to the unix epoch. * * @returns Nanoseconds relative to unix epoch. * @param pTime The time spec to interpret. */ DECLINLINE(int64_t) RTTimeSpecGetNano(PCRTTIMESPEC pTime) { return pTime->i64NanosecondsRelativeToUnixEpoch; } /** * Sets the time give by nanoseconds relative to the unix epoch. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Nano The new time in nanoseconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSetNano(PRTTIMESPEC pTime, int64_t i64Nano) { pTime->i64NanosecondsRelativeToUnixEpoch = i64Nano; return pTime; } /** * Gets the time as microseconds relative to the unix epoch. * * @returns microseconds relative to unix epoch. * @param pTime The time spec to interpret. */ DECLINLINE(int64_t) RTTimeSpecGetMicro(PCRTTIMESPEC pTime) { return pTime->i64NanosecondsRelativeToUnixEpoch / 1000; } /** * Sets the time given by microseconds relative to the unix epoch. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Micro The new time in microsecond. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSetMicro(PRTTIMESPEC pTime, int64_t i64Micro) { pTime->i64NanosecondsRelativeToUnixEpoch = i64Micro * 1000; return pTime; } /** * Gets the time as milliseconds relative to the unix epoch. * * @returns milliseconds relative to unix epoch. * @param pTime The time spec to interpret. */ DECLINLINE(int64_t) RTTimeSpecGetMilli(PCRTTIMESPEC pTime) { return pTime->i64NanosecondsRelativeToUnixEpoch / 1000000; } /** * Sets the time given by milliseconds relative to the unix epoch. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Milli The new time in milliseconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSetMilli(PRTTIMESPEC pTime, int64_t i64Milli) { pTime->i64NanosecondsRelativeToUnixEpoch = i64Milli * 1000000; return pTime; } /** * Gets the time as seconds relative to the unix epoch. * * @returns seconds relative to unix epoch. * @param pTime The time spec to interpret. */ DECLINLINE(int64_t) RTTimeSpecGetSeconds(PCRTTIMESPEC pTime) { return pTime->i64NanosecondsRelativeToUnixEpoch / 1000000000; } /** * Sets the time given by seconds relative to the unix epoch. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Seconds The new time in seconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSetSeconds(PRTTIMESPEC pTime, int64_t i64Seconds) { pTime->i64NanosecondsRelativeToUnixEpoch = i64Seconds * 1000000000; return pTime; } /** * Makes the time spec absolute like abs() does (i.e. a positive value). * * @returns pTime. * @param pTime The time spec to modify. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecAbsolute(PRTTIMESPEC pTime) { if (pTime->i64NanosecondsRelativeToUnixEpoch < 0) pTime->i64NanosecondsRelativeToUnixEpoch = -pTime->i64NanosecondsRelativeToUnixEpoch; return pTime; } /** * Negates the time. * * @returns pTime. * @param pTime The time spec to modify. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecNegate(PRTTIMESPEC pTime) { pTime->i64NanosecondsRelativeToUnixEpoch = -pTime->i64NanosecondsRelativeToUnixEpoch; return pTime; } /** * Adds a time period to the time. * * @returns pTime. * @param pTime The time spec to modify. * @param pTimeAdd The time spec to add to pTime. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecAdd(PRTTIMESPEC pTime, PCRTTIMESPEC pTimeAdd) { pTime->i64NanosecondsRelativeToUnixEpoch += pTimeAdd->i64NanosecondsRelativeToUnixEpoch; return pTime; } /** * Adds a time period give as nanoseconds from the time. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Nano The time period in nanoseconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecAddNano(PRTTIMESPEC pTime, int64_t i64Nano) { pTime->i64NanosecondsRelativeToUnixEpoch += i64Nano; return pTime; } /** * Adds a time period give as microseconds from the time. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Micro The time period in microseconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecAddMicro(PRTTIMESPEC pTime, int64_t i64Micro) { pTime->i64NanosecondsRelativeToUnixEpoch += i64Micro * 1000; return pTime; } /** * Adds a time period give as milliseconds from the time. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Milli The time period in milliseconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecAddMilli(PRTTIMESPEC pTime, int64_t i64Milli) { pTime->i64NanosecondsRelativeToUnixEpoch += i64Milli * 1000000; return pTime; } /** * Adds a time period give as seconds from the time. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Seconds The time period in seconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecAddSeconds(PRTTIMESPEC pTime, int64_t i64Seconds) { pTime->i64NanosecondsRelativeToUnixEpoch += i64Seconds * 1000000000; return pTime; } /** * Subtracts a time period from the time. * * @returns pTime. * @param pTime The time spec to modify. * @param pTimeSub The time spec to subtract from pTime. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSub(PRTTIMESPEC pTime, PCRTTIMESPEC pTimeSub) { pTime->i64NanosecondsRelativeToUnixEpoch -= pTimeSub->i64NanosecondsRelativeToUnixEpoch; return pTime; } /** * Subtracts a time period give as nanoseconds from the time. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Nano The time period in nanoseconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSubNano(PRTTIMESPEC pTime, int64_t i64Nano) { pTime->i64NanosecondsRelativeToUnixEpoch -= i64Nano; return pTime; } /** * Subtracts a time period give as microseconds from the time. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Micro The time period in microseconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSubMicro(PRTTIMESPEC pTime, int64_t i64Micro) { pTime->i64NanosecondsRelativeToUnixEpoch -= i64Micro * 1000; return pTime; } /** * Subtracts a time period give as milliseconds from the time. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Milli The time period in milliseconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSubMilli(PRTTIMESPEC pTime, int64_t i64Milli) { pTime->i64NanosecondsRelativeToUnixEpoch -= i64Milli * 1000000; return pTime; } /** * Subtracts a time period give as seconds from the time. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Seconds The time period in seconds. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSubSeconds(PRTTIMESPEC pTime, int64_t i64Seconds) { pTime->i64NanosecondsRelativeToUnixEpoch -= i64Seconds * 100000000; return pTime; } /* PORTME: Add struct timeval guard macro here. */ #if defined(RTTIME_INCL_TIMEVAL) || defined(_STRUCT_TIMEVAL) || defined(_SYS__TIMEVAL_H_) || defined(_SYS_TIME_H) || defined(_TIMEVAL) || defined(_LINUX_TIME_H) /** * Gets the time as POSIX timeval. * * @returns pTime. * @param pTime The time spec to interpret. * @param pTimeval Where to store the time as POSIX timeval. */ DECLINLINE(struct timeval *) RTTimeSpecGetTimeval(PCRTTIMESPEC pTime, struct timeval *pTimeval) { int64_t i64 = RTTimeSpecGetMicro(pTime); int32_t i32Micro = (int32_t)(i64 % 1000000); i64 /= 1000000; if (i32Micro < 0) { i32Micro += 1000000; i64--; } pTimeval->tv_sec = (time_t)i64; pTimeval->tv_usec = i32Micro; return pTimeval; } /** * Sets the time as POSIX timeval. * * @returns pTime. * @param pTime The time spec to modify. * @param pTimeval Pointer to the POSIX timeval struct with the new time. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSetTimeval(PRTTIMESPEC pTime, const struct timeval *pTimeval) { return RTTimeSpecAddMicro(RTTimeSpecSetSeconds(pTime, pTimeval->tv_sec), pTimeval->tv_usec); } #endif /* various ways of detecting struct timeval */ /* PORTME: Add struct timespec guard macro here. */ #if defined(RTTIME_INCL_TIMESPEC) || defined(_STRUCT_TIMESPEC) || defined(_SYS__TIMESPEC_H_) || defined(TIMEVAL_TO_TIMESPEC) || defined(_TIMESPEC) /** * Gets the time as POSIX timespec. * * @returns pTime. * @param pTime The time spec to interpret. * @param pTimespec Where to store the time as POSIX timespec. */ DECLINLINE(struct timespec *) RTTimeSpecGetTimespec(PCRTTIMESPEC pTime, struct timespec *pTimespec) { int64_t i64 = RTTimeSpecGetNano(pTime); int32_t i32Nano = (int32_t)(i64 % 1000000000); i64 /= 1000000000; if (i32Nano < 0) { i32Nano += 1000000000; i64--; } pTimespec->tv_sec = (time_t)i64; pTimespec->tv_nsec = i32Nano; return pTimespec; } /** * Sets the time as POSIX timespec. * * @returns pTime. * @param pTime The time spec to modify. * @param pTimespec Pointer to the POSIX timespec struct with the new time. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSetTimespec(PRTTIMESPEC pTime, const struct timespec *pTimespec) { return RTTimeSpecAddNano(RTTimeSpecSetSeconds(pTime, pTimespec->tv_sec), pTimespec->tv_nsec); } #endif /* various ways of detecting struct timespec */ /** The offset of the unix epoch and the base for NT time (in 100ns units). * Nt time starts at 1601-01-01 00:00:00. */ #define RTTIME_NT_TIME_OFFSET_UNIX (116444736000000000LL) /** * Gets the time as NT time. * * @returns Nt time. * @param pTime The time spec to interpret. */ DECLINLINE(uint64_t) RTTimeSpecGetNtTime(PCRTTIMESPEC pTime) { return pTime->i64NanosecondsRelativeToUnixEpoch / 100 + RTTIME_NT_TIME_OFFSET_UNIX; } /** * Sets the time given by Nt time. * * @returns pTime. * @param pTime The time spec to modify. * @param u64NtTime The new time in Nt time. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSetNtTime(PRTTIMESPEC pTime, uint64_t u64NtTime) { pTime->i64NanosecondsRelativeToUnixEpoch = ((int64_t)u64NtTime - RTTIME_NT_TIME_OFFSET_UNIX) * 100; return pTime; } #ifdef _FILETIME_ /** * Gets the time as NT file time. * * @returns pFileTime. * @param pTime The time spec to interpret. * @param pFileTime Pointer to NT filetime structure. */ DECLINLINE(PFILETIME) RTTimeSpecGetNtFileTime(PCRTTIMESPEC pTime, PFILETIME pFileTime) { *((uint64_t *)pFileTime) = RTTimeSpecGetNtTime(pTime); return pFileTime; } /** * Sets the time as NT file time. * * @returns pTime. * @param pTime The time spec to modify. * @param pFileTime Where to store the time as Nt file time. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSetNtFileTime(PRTTIMESPEC pTime, const FILETIME *pFileTime) { return RTTimeSpecSetNtTime(pTime, *(const uint64_t *)pFileTime); } #endif /** The offset to the start of DOS time. * DOS time starts 1980-01-01 00:00:00. */ #define RTTIME_OFFSET_DOS_TIME (315532800000000000LL) /** * Gets the time as seconds relative to the start of dos time. * * @returns seconds relative to the start of dos time. * @param pTime The time spec to interpret. */ DECLINLINE(int64_t) RTTimeSpecGetDosSeconds(PCRTTIMESPEC pTime) { return (pTime->i64NanosecondsRelativeToUnixEpoch - RTTIME_OFFSET_DOS_TIME) / 1000000000; } /** * Sets the time given by seconds relative to the start of dos time. * * @returns pTime. * @param pTime The time spec to modify. * @param i64Seconds The new time in seconds relative to the start of dos time. */ DECLINLINE(PRTTIMESPEC) RTTimeSpecSetDosSeconds(PRTTIMESPEC pTime, int64_t i64Seconds) { pTime->i64NanosecondsRelativeToUnixEpoch = i64Seconds * 1000000000 + RTTIME_OFFSET_DOS_TIME; return pTime; } /** * Compare two time specs. * * @returns true they are equal. * @returns false they are not equal. * @param pTime1 The 1st time spec. * @param pTime2 The 2nd time spec. */ DECLINLINE(bool) RTTimeSpecIsEqual(PCRTTIMESPEC pTime1, PCRTTIMESPEC pTime2) { return pTime1->i64NanosecondsRelativeToUnixEpoch == pTime2->i64NanosecondsRelativeToUnixEpoch; } /** * Converts a time spec to a ISO date string. * * @returns psz on success. * @returns NULL on buffer underflow. * @param pTime The time spec. * @param psz Where to store the string. * @param cb The size of the buffer. */ RTDECL(char *) RTTimeSpecToString(PCRTTIMESPEC pTime, char *psz, size_t cb); /** @} */ /** * Exploded time. */ #pragma pack(1) typedef struct RTTIME { /** The year number. */ int32_t i32Year; /** The month of the year (1-12). January is 1. */ uint8_t u8Month; /** The day of the week (0-6). Monday is 0. */ uint8_t u8WeekDay; /** The day of the year (1-366). January the 1st is 1. */ uint16_t u16YearDay; /** The day of the month (1-31). */ uint8_t u8MonthDay; /** Hour of the day (0-23). */ uint8_t u8Hour; /** The minute of the hour (0-59). */ uint8_t u8Minute; /** The second of the minute (0-60). * (u32Nanosecond / 1000000) */ uint8_t u8Second; /** The nanoseconds of the second (0-999999999). */ uint32_t u32Nanosecond; /** Flags, of the RTTIME_FLAGS_* \#defines. */ uint32_t fFlags; /** UCT time offset in minutes (-840-840). * @remarks The implementation of RTTimeLocal* isn't quite there yet, so this might not be 100% correct. */ int32_t offUTC; } RTTIME; #pragma pack() /** Pointer to a exploded time structure. */ typedef RTTIME *PRTTIME; /** Pointer to a const exploded time structure. */ typedef const RTTIME *PCRTTIME; /** @name RTTIME::fFlags values. * @{ */ /** Set if the time is UTC. If clear the time local time. */ #define RTTIME_FLAGS_TYPE_MASK 3 /** the time is UTC time. */ #define RTTIME_FLAGS_TYPE_UTC 2 /** The time is local time. */ #define RTTIME_FLAGS_TYPE_LOCAL 3 /** Set if the time is local and daylight saving time is in effect. * Not bit is not valid if RTTIME_FLAGS_NO_DST_DATA is set. */ #define RTTIME_FLAGS_DST RT_BIT(4) /** Set if the time is local and there is no data available on daylight saving time. */ #define RTTIME_FLAGS_NO_DST_DATA RT_BIT(5) /** Set if the year is a leap year. * This is mutual exclusiv with RTTIME_FLAGS_COMMON_YEAR. */ #define RTTIME_FLAGS_LEAP_YEAR RT_BIT(6) /** Set if the year is a common year. * This is mutual exclusiv with RTTIME_FLAGS_LEAP_YEAR. */ #define RTTIME_FLAGS_COMMON_YEAR RT_BIT(7) /** The mask of valid flags. */ #define RTTIME_FLAGS_MASK UINT32_C(0xff) /** @} */ /** * Gets the current system time (UTC). * * @returns pTime. * @param pTime Where to store the time. */ RTDECL(PRTTIMESPEC) RTTimeNow(PRTTIMESPEC pTime); /** * Sets the system time. * * @returns IPRT status code * @param pTime The new system time (UTC). * * @remarks This will usually fail because changing the wall time is usually * requires extra privileges. */ RTDECL(int) RTTimeSet(PCRTTIMESPEC pTime); /** * Explodes a time spec (UTC). * * @returns pTime. * @param pTime Where to store the exploded time. * @param pTimeSpec The time spec to exploded. */ RTDECL(PRTTIME) RTTimeExplode(PRTTIME pTime, PCRTTIMESPEC pTimeSpec); /** * Implodes exploded time to a time spec (UTC). * * @returns pTime on success. * @returns NULL if the pTime data is invalid. * @param pTimeSpec Where to store the imploded UTC time. * If pTime specifies a time which outside the range, maximum or * minimum values will be returned. * @param pTime Pointer to the exploded time to implode. * The fields u8Month, u8WeekDay and u8MonthDay are not used, * and all the other fields are expected to be within their * bounds. Use RTTimeNormalize() to calculate u16YearDay and * normalize the ranges of the fields. */ RTDECL(PRTTIMESPEC) RTTimeImplode(PRTTIMESPEC pTimeSpec, PCRTTIME pTime); /** * Normalizes the fields of a time structure. * * It is possible to calculate year-day from month/day and vice * versa. If you adjust any of of these, make sure to zero the * other so you make it clear which of the fields to use. If * it's ambiguous, the year-day field is used (and you get * assertions in debug builds). * * All the time fields and the year-day or month/day fields will * be adjusted for overflows. (Since all fields are unsigned, there * is no underflows.) It is possible to exploit this for simple * date math, though the recommended way of doing that to implode * the time into a timespec and do the math on that. * * @returns pTime on success. * @returns NULL if the data is invalid. * * @param pTime The time structure to normalize. * * @remarks This function doesn't work with local time, only with UTC time. */ RTDECL(PRTTIME) RTTimeNormalize(PRTTIME pTime); /** * Gets the current local system time. * * @returns pTime. * @param pTime Where to store the local time. */ RTDECL(PRTTIMESPEC) RTTimeLocalNow(PRTTIMESPEC pTime); /** * Gets the delta between UTC and local time. * * @code * RTTIMESPEC LocalTime; * RTTimeSpecAddNano(RTTimeNow(&LocalTime), RTTimeLocalDeltaNano()); * @endcode * * @returns Returns the nanosecond delta between UTC and local time. */ RTDECL(int64_t) RTTimeLocalDeltaNano(void); /** * Explodes a time spec to the localized timezone. * * @returns pTime. * @param pTime Where to store the exploded time. * @param pTimeSpec The time spec to exploded (UTC). */ RTDECL(PRTTIME) RTTimeLocalExplode(PRTTIME pTime, PCRTTIMESPEC pTimeSpec); /** * Normalizes the fields of a time structure containing local time. * * See RTTimeNormalize for details. * * @returns pTime on success. * @returns NULL if the data is invalid. * @param pTime The time structure to normalize. */ RTDECL(PRTTIME) RTTimeLocalNormalize(PRTTIME pTime); /** * Converts a time spec to a ISO date string. * * @returns psz on success. * @returns NULL on buffer underflow. * @param pTime The time. Caller should've normalized this. * @param psz Where to store the string. * @param cb The size of the buffer. */ RTDECL(char *) RTTimeToString(PCRTTIME pTime, char *psz, size_t cb); /** * Checks if a year is a leap year or not. * * @returns true if it's a leap year. * @returns false if it's a common year. * @param i32Year The year in question. */ RTDECL(bool) RTTimeIsLeapYear(int32_t i32Year); /** * Gets the current nanosecond timestamp. * * @returns nanosecond timestamp. */ RTDECL(uint64_t) RTTimeNanoTS(void); /** * Gets the current millisecond timestamp. * * @returns millisecond timestamp. */ RTDECL(uint64_t) RTTimeMilliTS(void); /** * Debugging the time api. * * @returns the number of 1ns steps which has been applied by RTTimeNanoTS(). */ RTDECL(uint32_t) RTTimeDbgSteps(void); /** * Debugging the time api. * * @returns the number of times the TSC interval expired RTTimeNanoTS(). */ RTDECL(uint32_t) RTTimeDbgExpired(void); /** * Debugging the time api. * * @returns the number of bad previous values encountered by RTTimeNanoTS(). */ RTDECL(uint32_t) RTTimeDbgBad(void); /** * Debugging the time api. * * @returns the number of update races in RTTimeNanoTS(). */ RTDECL(uint32_t) RTTimeDbgRaces(void); /** @name RTTimeNanoTS GIP worker functions, for TM. * @{ */ /** Pointer to a RTTIMENANOTSDATA structure. */ typedef struct RTTIMENANOTSDATA *PRTTIMENANOTSDATA; /** * Nanosecond timestamp data. * * This is used to keep track of statistics and callback so IPRT * and TM (VirtualBox) can share code. * * @remark Keep this in sync with the assembly version in timesupA.asm. */ typedef struct RTTIMENANOTSDATA { /** Where the previous timestamp is stored. * This is maintained to ensure that time doesn't go backwards or anything. */ uint64_t volatile *pu64Prev; /** * Helper function that's used by the assembly routines when something goes bust. * * @param pData Pointer to this structure. * @param u64NanoTS The calculated nano ts. * @param u64DeltaPrev The delta relative to the previously returned timestamp. * @param u64PrevNanoTS The previously returned timestamp (as it was read it). */ DECLCALLBACKMEMBER(void, pfnBad)(PRTTIMENANOTSDATA pData, uint64_t u64NanoTS, uint64_t u64DeltaPrev, uint64_t u64PrevNanoTS); /** * Callback for when rediscovery is required. * * @returns Nanosecond timestamp. * @param pData Pointer to this structure. */ DECLCALLBACKMEMBER(uint64_t, pfnRediscover)(PRTTIMENANOTSDATA pData); /** Just a dummy alignment member. */ void *pvDummy; /** Number of 1ns steps because of overshooting the period. */ uint32_t c1nsSteps; /** The number of times the interval expired (overflow). */ uint32_t cExpired; /** Number of "bad" previous values. */ uint32_t cBadPrev; /** The number of update races. */ uint32_t cUpdateRaces; } RTTIMENANOTSDATA; #ifndef IN_RING3 /** * The Ring-3 layout of the RTTIMENANOTSDATA structure. */ typedef struct RTTIMENANOTSDATAR3 { R3PTRTYPE(uint64_t volatile *) pu64Prev; DECLR3CALLBACKMEMBER(void, pfnBad,(PRTTIMENANOTSDATA pData, uint64_t u64NanoTS, uint64_t u64DeltaPrev, uint64_t u64PrevNanoTS)); DECLR3CALLBACKMEMBER(uint64_t, pfnRediscover,(PRTTIMENANOTSDATA pData)); RTR3PTR pvDummy; uint32_t c1nsSteps; uint32_t cExpired; uint32_t cBadPrev; uint32_t cUpdateRaces; } RTTIMENANOTSDATAR3; #else typedef RTTIMENANOTSDATA RTTIMENANOTSDATAR3; #endif #ifndef IN_RING0 /** * The Ring-3 layout of the RTTIMENANOTSDATA structure. */ typedef struct RTTIMENANOTSDATAR0 { R0PTRTYPE(uint64_t volatile *) pu64Prev; DECLR0CALLBACKMEMBER(void, pfnBad,(PRTTIMENANOTSDATA pData, uint64_t u64NanoTS, uint64_t u64DeltaPrev, uint64_t u64PrevNanoTS)); DECLR0CALLBACKMEMBER(uint64_t, pfnRediscover,(PRTTIMENANOTSDATA pData)); RTR0PTR pvDummy; uint32_t c1nsSteps; uint32_t cExpired; uint32_t cBadPrev; uint32_t cUpdateRaces; } RTTIMENANOTSDATAR0; #else typedef RTTIMENANOTSDATA RTTIMENANOTSDATAR0; #endif #ifndef IN_RC /** * The RC layout of the RTTIMENANOTSDATA structure. */ typedef struct RTTIMENANOTSDATARC { RCPTRTYPE(uint64_t volatile *) pu64Prev; DECLRCCALLBACKMEMBER(void, pfnBad,(PRTTIMENANOTSDATA pData, uint64_t u64NanoTS, uint64_t u64DeltaPrev, uint64_t u64PrevNanoTS)); DECLRCCALLBACKMEMBER(uint64_t, pfnRediscover,(PRTTIMENANOTSDATA pData)); RCPTRTYPE(void *) pvDummy; uint32_t c1nsSteps; uint32_t cExpired; uint32_t cBadPrev; uint32_t cUpdateRaces; } RTTIMENANOTSDATARC; #else typedef RTTIMENANOTSDATA RTTIMENANOTSDATARC; #endif /** Internal RTTimeNanoTS worker (assembly). */ typedef DECLCALLBACK(uint64_t) FNTIMENANOTSINTERNAL(PRTTIMENANOTSDATA pData); /** Pointer to an internal RTTimeNanoTS worker (assembly). */ typedef FNTIMENANOTSINTERNAL *PFNTIMENANOTSINTERNAL; RTDECL(uint64_t) RTTimeNanoTSLegacySync(PRTTIMENANOTSDATA pData); RTDECL(uint64_t) RTTimeNanoTSLegacyAsync(PRTTIMENANOTSDATA pData); RTDECL(uint64_t) RTTimeNanoTSLFenceSync(PRTTIMENANOTSDATA pData); RTDECL(uint64_t) RTTimeNanoTSLFenceAsync(PRTTIMENANOTSDATA pData); /** @} */ /** * Gets the current nanosecond timestamp. * * This differs from RTTimeNanoTS in that it will use system APIs and not do any * resolution or performance optimizations. * * @returns nanosecond timestamp. */ RTDECL(uint64_t) RTTimeSystemNanoTS(void); /** * Gets the current millisecond timestamp. * * This differs from RTTimeNanoTS in that it will use system APIs and not do any * resolution or performance optimizations. * * @returns millisecond timestamp. */ RTDECL(uint64_t) RTTimeSystemMilliTS(void); /** * Get the nanosecond timestamp relative to program startup. * * @returns Timestamp relative to program startup. */ RTDECL(uint64_t) RTTimeProgramNanoTS(void); /** * Get the microsecond timestamp relative to program startup. * * @returns Timestamp relative to program startup. */ RTDECL(uint64_t) RTTimeProgramMicroTS(void); /** * Get the millisecond timestamp relative to program startup. * * @returns Timestamp relative to program startup. */ RTDECL(uint64_t) RTTimeProgramMilliTS(void); /** * Get the second timestamp relative to program startup. * * @returns Timestamp relative to program startup. */ RTDECL(uint32_t) RTTimeProgramSecTS(void); /** * Get the RTTimeNanoTS() of when the program started. * * @returns Program startup timestamp. */ RTDECL(uint64_t) RTTimeProgramStartNanoTS(void); /** @} */ RT_C_DECLS_END #endif