; $Id$ ; @file ; VBoxGuestAdditionsNT4.nsh - Guest Additions installation for NT4. ; ; ; Copyright (C) 2006-2013 Oracle Corporation ; ; This file is part of VirtualBox Open Source Edition (OSE), as ; available from http://www.virtualbox.org. This file is free software; ; you can redistribute it and/or modify it under the terms of the GNU ; General Public License (GPL) as published by the Free Software ; Foundation, in version 2 as it comes in the "COPYING" file of the ; VirtualBox OSE distribution. VirtualBox OSE is distributed in the ; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. ; Function NT4_SetVideoResolution ; Check for all required parameters StrCmp $g_iScreenX "0" missingParms StrCmp $g_iScreenY "0" missingParms StrCmp $g_iScreenBpp "0" missingParms Goto haveParms missingParms: ${LogVerbose} "Missing display parameters for NT4, setting default (640x480, 8 BPP) ..." StrCpy $g_iScreenX '640' ; Default value StrCpy $g_iScreenY '480' ; Default value StrCpy $g_iScreenBpp '8' ; Default value ; Write setting into registry to show the desktop applet on next boot WriteRegStr HKLM "SYSTEM\CurrentControlSet\Control\GraphicsDrivers\NewDisplay" "" "" haveParms: ${LogVerbose} "Setting display parameters for NT4 ($g_iScreenXx$g_iScreenY, $g_iScreenBpp BPP) ..." WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.BitsPerPel" $g_iScreenBpp WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.Flags" 0x00000000 WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.VRefresh" 0x00000001 WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.XPanning" 0x00000000 WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.XResolution" $g_iScreenX WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.YPanning" 0x00000000 WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\vboxvideo\Device0" "DefaultSettings.YResolution" $g_iScreenY FunctionEnd Function NT4_SaveMouseDriverInfo Push $0 ; !!! NOTE !!! ; Due to some re-branding (see functions Uninstall_Sun, Uninstall_Innotek and ; Uninstall_SunXVM) the installer *has* to transport the very first saved i8042prt ; value to the current installer's "uninstall" directory in both mentioned ; functions above, otherwise NT4 will be screwed because it then would store ; "VBoxMouseNT.sys" as the original i8042prt driver which obviously isn't there ; after uninstallation anymore ; !!! NOTE !!! ; Save current mouse driver info so we may restore it on uninstallation ; But first check if we already installed the additions otherwise we will ; overwrite it with the VBoxMouseNT.sys ReadRegStr $0 HKLM "${PRODUCT_UNINST_KEY}" ${ORG_MOUSE_PATH} StrCmp $0 "" 0 exists ${LogVerbose} "Saving mouse driver info ..." ReadRegStr $0 HKLM "SYSTEM\CurrentControlSet\Services\i8042prt" "ImagePath" WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" ${ORG_MOUSE_PATH} $0 Goto exit exists: ${LogVerbose} "Mouse driver info already saved." Goto exit exit: !ifdef _DEBUG ${LogVerbose} "Mouse driver info: $0" !endif Pop $0 FunctionEnd Function NT4_Prepare ${If} $g_bNoVBoxServiceExit == "false" ; Stop / kill VBoxService Call StopVBoxService ${EndIf} ${If} $g_bNoVBoxTrayExit == "false" ; Stop / kill VBoxTray Call StopVBoxTray ${EndIf} ; Delete VBoxService from registry DeleteRegValue HKLM "Software\Microsoft\Windows\CurrentVersion\Run" "VBoxService" ; Delete old VBoxService.exe from install directory (replaced by VBoxTray.exe) Delete /REBOOTOK "$INSTDIR\VBoxService.exe" FunctionEnd Function NT4_CopyFiles ${LogVerbose} "Copying files for NT4 ..." SetOutPath "$INSTDIR" FILE "$%PATH_OUT%\bin\additions\VBoxGuestDrvInst.exe" FILE "$%PATH_OUT%\bin\additions\RegCleanup.exe" ; The files to install for NT 4, they go into the system directories SetOutPath "$SYSDIR" FILE "$%PATH_OUT%\bin\additions\VBoxDisp.dll" FILE "$%PATH_OUT%\bin\additions\VBoxTray.exe" FILE "$%PATH_OUT%\bin\additions\VBoxHook.dll" FILE "$%PATH_OUT%\bin\additions\VBoxControl.exe" ; VBoxService FILE "$%PATH_OUT%\bin\additions\VBoxServiceNT.exe" ; The drivers into the "drivers" directory SetOutPath "$SYSDIR\drivers" FILE "$%PATH_OUT%\bin\additions\VBoxVideo.sys" FILE "$%PATH_OUT%\bin\additions\VBoxMouseNT.sys" FILE "$%PATH_OUT%\bin\additions\VBoxGuestNT.sys" ;FILE "$%PATH_OUT%\bin\additions\VBoxSFNT.sys" ; Shared Folders not available on NT4! FunctionEnd Function NT4_InstallFiles ${LogVerbose} "Installing drivers for NT4 ..." ; Install guest driver ${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service create $\"VBoxGuest$\" $\"VBoxGuest Support Driver$\" 1 1 $\"$SYSDIR\drivers\VBoxGuestNT.sys$\" $\"Base$\"" "false" ; Bugfix: Set "Start" to 1, otherwise, VBoxGuest won't start on boot-up! ; Bugfix: Correct invalid "ImagePath" (\??\C:\WINNT\...) WriteRegDWORD HKLM "SYSTEM\CurrentControlSet\Services\VBoxGuest" "Start" 1 WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\VBoxGuest" "ImagePath" "System32\Drivers\VBoxGuestNT.sys" ; Run VBoxTray when Windows NT starts WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Run" "VBoxTray" '"$SYSDIR\VBoxTray.exe"' ; Video driver ${CmdExecute} "$\"$INSTDIR\VBoxGuestDrvInst.exe$\" /i" "false" ${LogVerbose} "Installing VirtualBox service ..." ; Create the VBoxService service ; No need to stop/remove the service here! Do this only on uninstallation! ${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service create $\"VBoxService$\" $\"VirtualBox Guest Additions Service$\" 16 2 $\"system32\VBoxServiceNT.exe$\" $\"Base$\"" "false" ; Create the Shared Folders service ... ;nsSCM::Install /NOUNLOAD "VBoxSF" "VirtualBox Shared Folders" 1 1 "$SYSDIR\drivers\VBoxSFNT.sys" "Network" "" "" "" ;Pop $0 ; Ret value !ifdef _DEBUG ;${LogVerbose} "SCM::Install VBoxSFNT.sys: $0" !endif ;IntCmp $0 0 +1 error error ; Check ret value (0=OK, 1=Error) ; ... and the link to the network provider ;WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\VBoxSF\NetworkProvider" "DeviceName" "\Device\VBoxMiniRdr" ;WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\VBoxSF\NetworkProvider" "Name" "VirtualBox Shared Folders" ;WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\VBoxSF\NetworkProvider" "ProviderPath" "$SYSDIR\VBoxMRXNP.dll" ; Add the shared folders network provider ;${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" netprovider add VBoxSF" "false" Goto done error: Abort "ERROR: Could not install files for Windows NT4! Installation aborted." done: FunctionEnd Function NT4_Main SetOutPath "$INSTDIR" Call NT4_Prepare Call NT4_CopyFiles ; This removes the flag "new display driver installed on the next bootup WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\RunOnce" "VBoxGuestInst" '"$INSTDIR\RegCleanup.exe"' Call NT4_SaveMouseDriverInfo Call NT4_InstallFiles Call NT4_SetVideoResolution ; Write mouse driver name to registry overwriting the default name WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\i8042prt" "ImagePath" "System32\DRIVERS\VBoxMouseNT.sys" FunctionEnd !macro NT4_UninstallInstDir un Function ${un}NT4_UninstallInstDir ; Delete remaining files Delete /REBOOTOK "$INSTDIR\VBoxGuestDrvInst.exe" Delete /REBOOTOK "$INSTDIR\RegCleanup.exe" FunctionEnd !macroend !insertmacro NT4_UninstallInstDir "" !insertmacro NT4_UninstallInstDir "un." !macro NT4_Uninstall un Function ${un}NT4_Uninstall Push $0 ; Remove the guest driver service ${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service delete VBoxGuest" "true" Delete /REBOOTOK "$SYSDIR\drivers\VBoxGuestNT.sys" ; Delete the VBoxService service Call ${un}StopVBoxService ${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service delete VBoxService" "true" DeleteRegValue HKLM "Software\Microsoft\Windows\CurrentVersion\Run" "VBoxService" Delete /REBOOTOK "$SYSDIR\VBoxServiceNT.exe" ; Delete the VBoxTray app Call ${un}StopVBoxTray DeleteRegValue HKLM "Software\Microsoft\Windows\CurrentVersion\Run" "VBoxTray" WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\RunOnce" "VBoxTrayDel" "$SYSDIR\cmd.exe /c del /F /Q $SYSDIR\VBoxTray.exe" Delete /REBOOTOK "$SYSDIR\VBoxTray.exe" ; If it can't be removed cause it's running, try next boot with "RunOnce" key above! Delete /REBOOTOK "$SYSDIR\VBoxHook.dll" ; Delete the VBoxControl utility Delete /REBOOTOK "$SYSDIR\VBoxControl.exe" ; Delete the VBoxVideo service ${CmdExecute} "$\"$INSTDIR\VBoxDrvInst.exe$\" service delete VBoxVideo" "true" ; Delete the VBox video driver files Delete /REBOOTOK "$SYSDIR\drivers\VBoxVideo.sys" Delete /REBOOTOK "$SYSDIR\VBoxDisp.dll" ; Get original mouse driver info and restore it ReadRegStr $0 ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" ${ORG_MOUSE_PATH} ; If we still got our driver stored in $0 then this will *never* work, so ; warn the user and set it to the default driver to not screw up NT4 here ${If} $0 == "System32\DRIVERS\VBoxMouseNT.sys" WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\i8042prt" "ImagePath" "System32\DRIVERS\i8042prt.sys" ${LogVerbose} "Old mouse driver is set to VBoxMouseNT.sys, defaulting to i8042prt.sys ..." ${Else} WriteRegStr HKLM "SYSTEM\CurrentControlSet\Services\i8042prt" "ImagePath" $0 ${EndIf} Delete /REBOOTOK "$SYSDIR\drivers\VBoxMouseNT.sys" Pop $0 FunctionEnd !macroend !insertmacro NT4_Uninstall "" !insertmacro NT4_Uninstall "un."