#! /bin/sh
#
# Linux Additions kernel module init script ($Revision: 43742 $)
#

#
# Copyright (C) 2006-2010 Oracle Corporation
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#


# chkconfig: 357 30 70
# description: VirtualBox Linux Additions kernel modules
#
### BEGIN INIT INFO
# Provides:       vboxadd
# Required-Start:
# Required-Stop:
# Default-Start:  2 3 4 5
# Default-Stop:   0 1 6
# Description:    VirtualBox Linux Additions kernel modules
### END INIT INFO

PATH=$PATH:/bin:/sbin:/usr/sbin
PACKAGE=VBoxGuestAdditions
LOG="/var/log/vboxadd-install.log"
MODPROBE=/sbin/modprobe
OLDMODULES="vboxguest vboxadd vboxsf vboxvfs vboxvideo"

if $MODPROBE -c | grep -q '^allow_unsupported_modules  *0'; then
  MODPROBE="$MODPROBE --allow-unsupported-modules"
fi

# Check architecture
cpu=`uname -m`;
case "$cpu" in
  i[3456789]86|x86)
    cpu="x86"
    lib_path="/usr/lib"
    ;;
  x86_64|amd64)
    cpu="amd64"
    if test -d "/usr/lib64"; then
      lib_path="/usr/lib64"
    else
      lib_path="/usr/lib"
    fi
    ;;
esac

if [ -f /etc/arch-release ]; then
    system=arch
elif [ -f /etc/redhat-release ]; then
    system=redhat
elif [ -f /etc/SuSE-release ]; then
    system=suse
elif [ -f /etc/gentoo-release ]; then
    system=gentoo
elif [ -f /etc/lfs-release -a -d /etc/rc.d/init.d ]; then
    system=lfs
else
    system=other
fi

if [ "$system" = "arch" ]; then
    USECOLOR=yes
    . /etc/rc.d/functions
    fail_msg() {
        stat_fail
    }

    succ_msg() {
        stat_done
    }

    begin() {
        stat_busy "$1"
    }
fi

if [ "$system" = "redhat" ]; then
    . /etc/init.d/functions
    fail_msg() {
        echo_failure
        echo
    }
    succ_msg() {
        echo_success
        echo
    }
    begin() {
        echo -n "$1"
    }
fi

if [ "$system" = "suse" ]; then
    . /etc/rc.status
    fail_msg() {
        rc_failed 1
        rc_status -v
    }
    succ_msg() {
        rc_reset
        rc_status -v
    }
    begin() {
        echo -n "$1"
    }
fi

if [ "$system" = "gentoo" ]; then
    if [ -f /sbin/functions.sh ]; then
        . /sbin/functions.sh
    elif [ -f /etc/init.d/functions.sh ]; then
        . /etc/init.d/functions.sh
    fi
    fail_msg() {
        eend 1
    }
    succ_msg() {
        eend $?
    }
    begin() {
        ebegin $1
    }
    if [ "`which $0`" = "/sbin/rc" ]; then
        shift
    fi
fi

if [ "$system" = "lfs" ]; then
    . /etc/rc.d/init.d/functions
    fail_msg() {
        echo_failure
    }
    succ_msg() {
        echo_ok
    }
    begin() {
        echo $1
    }
fi

if [ "$system" = "other" ]; then
    fail_msg() {
        echo " ...fail!"
    }
    succ_msg() {
        echo " ...done."
    }
    begin() {
        echo -n $1
    }
fi

show_error()
{
    if [ "$system" = "gentoo" ]; then
        eerror $1
    fi
    fail_msg
    echo "($1)"
}

fail()
{
    show_error "$1"
    exit 1
}

dev=/dev/vboxguest
userdev=/dev/vboxuser
config=/var/lib/VBoxGuestAdditions/config
owner=vboxadd
group=1

test_for_gcc_and_make()
{
    which make > /dev/null 2>&1 || printf "\nThe make utility was not found. If the following module compilation fails then\nthis could be the reason and you should try installing it.\n"
    which gcc > /dev/null 2>&1 || printf "\nThe gcc utility was not found. If the following module compilation fails then\nthis could be the reason and you should try installing it.\n"
}

test_sane_kernel_dir()
{
    KERN_VER=`uname -r`
    KERN_DIR="/lib/modules/$KERN_VER/build"
    if [ -d "$KERN_DIR" ]; then
        KERN_REL=`make -sC $KERN_DIR --no-print-directory kernelrelease 2>/dev/null || true`
        if [ -z "$KERN_REL" -o "x$KERN_REL" = "x$KERN_VER" ]; then
            return 0
        fi
    fi
    printf "\nThe headers for the current running kernel were not found. If the following\nmodule compilation fails then this could be the reason.\n"
    if [ "$system" = "redhat" ]; then
        if echo "$KERN_VER" | grep -q "uek"; then
            printf "The missing package can be probably installed with\nyum install kernel-uek-devel-$KERN_VER\n"
        else
            printf "The missing package can be probably installed with\nyum install kernel-devel-$KERN_VER\n"
        fi
    elif [ "$system" = "suse" ]; then
        KERN_VER_SUSE=`echo "$KERN_VER" | sed 's/.*-\([^-]*\)/\1/g'`
        KERN_VER_BASE=`echo "$KERN_VER" | sed 's/\(.*\)-[^-]*/\1/g'`
        printf "The missing package can be probably installed with\nzypper install kernel-$KERN_VER_SUSE-devel-$KERN_VER_BASE\n"
    elif [ "$system" = "debian" ]; then
        printf "The missing package can be probably installed with\napt-get install linux-headers-$KERN_VER\n"
    fi
}

running_vboxguest()
{
    lsmod | grep -q "vboxguest[^_-]"
}

running_vboxadd()
{
    lsmod | grep -q "vboxadd[^_-]"
}

running_vboxsf()
{
    lsmod | grep -q "vboxsf[^_-]"
}

running_vboxvideo()
{
    lsmod | grep -q "vboxvideo[^_-]"
}

do_vboxguest_non_udev()
{
    if [ ! -c $dev ]; then
        maj=`sed -n 's;\([0-9]\+\) vboxguest;\1;p' /proc/devices`
        if [ ! -z "$maj" ]; then
            min=0
        else
            min=`sed -n 's;\([0-9]\+\) vboxguest;\1;p' /proc/misc`
            if [ ! -z "$min" ]; then
                maj=10
            fi
        fi
        test -z "$maj" && {
            rmmod vboxguest 2>/dev/null
            fail "Cannot locate the VirtualBox device"
        }

        mknod -m 0664 $dev c $maj $min || {
            rmmod vboxguest 2>/dev/null
            fail "Cannot create device $dev with major $maj and minor $min"
        }
    fi
    chown $owner:$group $dev 2>/dev/null || {
        rm -f $dev 2>/dev/null
        rm -f $userdev 2>/dev/null
        rmmod vboxguest 2>/dev/null
        fail "Cannot change owner $owner:$group for device $dev"
    }

    if [ ! -c $userdev ]; then
        maj=10
        min=`sed -n 's;\([0-9]\+\) vboxuser;\1;p' /proc/misc`
        if [ ! -z "$min" ]; then
            mknod -m 0666 $userdev c $maj $min || {
                rm -f $dev 2>/dev/null
                rmmod vboxguest 2>/dev/null
                fail "Cannot create device $userdev with major $maj and minor $min"
            }
            chown $owner:$group $userdev 2>/dev/null || {
                rm -f $dev 2>/dev/null
                rm -f $userdev 2>/dev/null
                rmmod vboxguest 2>/dev/null
                fail "Cannot change owner $owner:$group for device $userdev"
            }
        fi
    fi
}

start()
{
    begin "Starting the VirtualBox Guest Additions ";
    uname -r | grep -q '^2\.6' 2>/dev/null &&
        ps -A -o comm | grep -q '/*udevd$' 2>/dev/null ||
        no_udev=1
    running_vboxguest || {
        rm -f $dev || {
            fail "Cannot remove $dev"
        }

        rm -f $userdev || {
            fail "Cannot remove $userdev"
        }

        $MODPROBE vboxguest >/dev/null 2>&1 || {
            fail "modprobe vboxguest failed"
        }
        case "$no_udev" in 1)
            sleep .5;;
        esac
    }
    case "$no_udev" in 1)
        do_vboxguest_non_udev;;
    esac

    running_vboxsf || {
        $MODPROBE vboxsf > /dev/null 2>&1 || {
            if dmesg | grep "vboxConnect failed" > /dev/null 2>&1; then
                fail_msg
                echo "Unable to start shared folders support.  Make sure that your VirtualBox build"
                echo "supports this feature."
                exit 1
            fi
            fail "modprobe vboxsf failed"
        }
    }

    # This is needed as X.Org Server 1.13 does not auto-load the module.
    running_vboxvideo || $MODPROBE vboxvideo > /dev/null 2>&1

    # Mount all shared folders from /etc/fstab. Normally this is done by some
    # other startup script but this requires the vboxdrv kernel module loaded.
    # This isn't necessary anymore as the vboxsf module is autoloaded.
    # mount -a -t vboxsf

    succ_msg
    return 0
}

stop()
{
    begin "Stopping VirtualBox Additions ";
    if ! umount -a -t vboxsf 2>/dev/null; then
        fail "Cannot unmount vboxsf folders"
    fi
    if running_vboxsf; then
        rmmod vboxsf 2>/dev/null || fail "Cannot unload module vboxsf"
    fi
    if running_vboxguest; then
        rmmod vboxguest 2>/dev/null || fail "Cannot unload module vboxguest"
        rm -f $userdev || fail "Cannot unlink $userdev"
        rm -f $dev || fail "Cannot unlink $dev"
    fi
    succ_msg
    return 0
}

restart()
{
    stop && start
    return 0
}

# Remove any existing VirtualBox guest kernel modules from the disk, but not
# from the kernel as they may still be in use
cleanup_modules()
{
    begin "Removing existing VirtualBox DKMS kernel modules"
    $DODKMS uninstall $OLDMODULES > $LOG
    succ_msg
    begin "Removing existing VirtualBox non-DKMS kernel modules"
    for i in $OLDMODULES; do
        find /lib/modules -name $i\* | xargs rm 2>/dev/null
    done
    succ_msg
}

# Build and install the VirtualBox guest kernel modules
setup_modules()
{
    # don't stop the old modules here -- they might be in use
    cleanup_modules
    begin "Building the VirtualBox Guest Additions kernel modules"

    # Short cut out if a dkms build succeeds
    if $DODKMS install vboxguest $INSTALL_VER >> $LOG 2>&1; then
        succ_msg
        return 0
    fi

    test_for_gcc_and_make
    test_sane_kernel_dir

    echo
    begin "Building the main Guest Additions module"
    if ! $BUILDINTMP \
        --save-module-symvers /tmp/vboxguest-Module.symvers \
        --module-source $MODULE_SRC/vboxguest \
        --no-print-directory install >> $LOG 2>&1; then
        show_error "Look at $LOG to find out what went wrong"
        return 1
    fi
    succ_msg
    begin "Building the shared folder support module"
    if ! $BUILDINTMP \
        --use-module-symvers /tmp/vboxguest-Module.symvers \
        --module-source $MODULE_SRC/vboxsf \
        --no-print-directory install >> $LOG 2>&1; then
        show_error  "Look at $LOG to find out what went wrong"
        return 1
    fi
    succ_msg
    if expr `uname -r` '<' '2.6.27' > /dev/null; then
        echo "Not building the VirtualBox advanced graphics driver as this Linux version is"
        echo "too old to use it."
    else
        begin "Building the OpenGL support module"
        if ! $BUILDINTMP \
            --use-module-symvers /tmp/vboxguest-Module.symvers \
            --module-source $MODULE_SRC/vboxvideo \
            --no-print-directory install >> $LOG 2>&1; then
            show_error "Look at $LOG to find out what went wrong"
            return 1
        fi
        succ_msg
    fi
    depmod
    return 0
}

# Do non-kernel bits needed for the kernel modules to work properly (user
# creation, udev, mount helper...)
extra_setup()
{
    begin "Doing non-kernel setup of the Guest Additions"
    echo "Creating user for the Guest Additions." >> $LOG
    # This is the LSB version of useradd and should work on recent
    # distributions
    useradd -d /var/run/vboxadd -g 1 -r -s /bin/false vboxadd >/dev/null 2>&1
    # And for the others, we choose a UID ourselves
    useradd -d /var/run/vboxadd -g 1 -u 501 -o -s /bin/false vboxadd >/dev/null 2>&1

    # Add a group "vboxsf" for Shared Folders access
    # All users which want to access the auto-mounted Shared Folders have to
    # be added to this group.
    groupadd -f vboxsf >/dev/null 2>&1

    # Create udev description file
    if [ -d /etc/udev/rules.d ]; then
        echo "Creating udev rule for the Guest Additions kernel module." >> $LOG
        udev_call=""
        udev_app=`which udevadm 2> /dev/null`
        if [ $? -eq 0 ]; then
            udev_call="${udev_app} version 2> /dev/null"
        else
            udev_app=`which udevinfo 2> /dev/null`
            if [ $? -eq 0 ]; then
                udev_call="${udev_app} -V 2> /dev/null"
            fi
        fi
        udev_fix="="
        if [ "${udev_call}" != "" ]; then
            udev_out=`${udev_call}`
            udev_ver=`expr "$udev_out" : '[^0-9]*\([0-9]*\)'`
            if [ "$udev_ver" = "" -o "$udev_ver" -lt 55 ]; then
               udev_fix=""
            fi
        fi
        ## @todo 60-vboxadd.rules -> 60-vboxguest.rules ?
        echo "KERNEL=${udev_fix}\"vboxguest\", NAME=\"vboxguest\", OWNER=\"vboxadd\", MODE=\"0660\"" > /etc/udev/rules.d/60-vboxadd.rules
        echo "KERNEL=${udev_fix}\"vboxuser\", NAME=\"vboxuser\", OWNER=\"vboxadd\", MODE=\"0666\"" >> /etc/udev/rules.d/60-vboxadd.rules
    fi

    # Put mount.vboxsf in the right place
    ln -sf "$lib_path/$PACKAGE/mount.vboxsf" /sbin
    # At least Fedora 11 and Fedora 12 require the correct security context when
    # executing this command from service scripts. Shouldn't hurt for other
    # distributions.
    chcon -u system_u -t mount_exec_t "$lib_path/$PACKAGE/mount.vboxsf" > /dev/null 2>&1
    # And at least Fedora 15 needs this for the acceleration support check to
    # work
    redhat_release=`cat /etc/redhat-release 2> /dev/null`
    case "$redhat_release" in Fedora\ release\ 15* )
        for i in "$lib_path"/*.so
        do
            restorecon "$i" >/dev/null
        done
        ;;
    esac

    succ_msg
}

# setup_script
setup()
{
    if test -r $config; then
      . $config
    else
      fail "Configuration file $config not found"
    fi
    test -n "$INSTALL_DIR" -a -n "$INSTALL_VER" ||
      fail "Configuration file $config not complete"
    export BUILD_TYPE
    export USERNAME

    MODULE_SRC="$INSTALL_DIR/src/vboxguest-$INSTALL_VER"
    BUILDINTMP="$MODULE_SRC/build_in_tmp"
    DODKMS="$MODULE_SRC/do_dkms"
    chcon -t bin_t "$BUILDINTMP" > /dev/null 2>&1
    chcon -t bin_t "$DODKMS"     > /dev/null 2>&1

    setup_modules
    mod_succ="$?"
    extra_setup
    if [ "$mod_succ" -eq "0" ]; then
        if running_vboxguest || running_vboxadd; then
            printf "You should restart your guest to make sure the new modules are actually used\n\n"
        else
            start
        fi
    fi
}

# cleanup_script
cleanup()
{
    if test -r $config; then
      . $config
      test -n "$INSTALL_DIR" -a -n "$INSTALL_VER" ||
        fail "Configuration file $config not complete"
      DODKMS="$INSTALL_DIR/src/vboxguest-$INSTALL_VER/do_dkms"
    elif test -x ./do_dkms; then  # Executing as part of the installer...
      DODKMS=./do_dkms
    else
      fail "Configuration file $config not found"
    fi

    # Delete old versions of VBox modules.
    cleanup_modules
    depmod

    # Remove old module sources
    for i in $OLDMODULES; do
      rm -rf /usr/src/$i-*
    done

    # Remove other files
    rm /sbin/mount.vboxsf 2>/dev/null
    rm /etc/udev/rules.d/60-vboxadd.rules 2>/dev/null
}

dmnstatus()
{
    if running_vboxguest; then
        echo "The VirtualBox Additions are currently running."
    else
        echo "The VirtualBox Additions are not currently running."
    fi
}

case "$1" in
start)
    start
    ;;
stop)
    stop
    ;;
restart)
    restart
    ;;
setup)
    setup
    ;;
cleanup)
    cleanup
    ;;
status)
    dmnstatus
    ;;
*)
    echo "Usage: $0 {start|stop|restart|status|setup}"
    exit 1
esac

exit