/** $Id: DBGConsole.cpp 5079 2007-09-27 14:39:05Z vboxsync $ */ /** @file * DBGC - Debugger Console. */ /* * Copyright (C) 2006-2007 innotek GmbH * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License as published by the Free Software Foundation, * in version 2 as it comes in the "COPYING" file of the VirtualBox OSE * distribution. VirtualBox OSE is distributed in the hope that it will * be useful, but WITHOUT ANY WARRANTY of any kind. */ /** @page pg_dbgc DBGC - The Debug Console * * The debugger console is a first attempt to make some interactive * debugging facilities for the VirtualBox backend (i.e. the VM). At a later * stage we'll make a fancy gui around this, but for the present a telnet (or * serial terminal) will have to suffice. * * The debugger is only built into the VM with debug builds or when * VBOX_WITH_DEBUGGER is defined. There might be need for \#ifdef'ing on this * define to enable special debugger hooks, but the general approach is to * make generic interfaces. The individual components also can register * external commands, and such code must be within \#ifdef. * * * @section sec_dbgc_op Operation (intentions) * * The console will process commands in a manner similar to the OS/2 and * windows kernel debuggers. This means ';' is a command separator and * that when possible we'll use the same command names as these two uses. * * * @subsection sec_dbg_op_numbers Numbers * * Numbers are hexadecimal unless specified with a prefix indicating * elsewise. Prefixes: * - '0x' - hexadecimal. * - '0i' - decimal * - '0t' - octal. * - '0y' - binary. * * * @subsection sec_dbg_op_address Addressing modes * * - Default is flat. For compatability '%' also means flat. * - Segmented addresses are specified selector:offset. * - Physical addresses are specified using '%%'. * - The default target for the addressing is the guest context, the '#' * will override this and set it to the host. * * * @subsection sec_dbg_op_evalution Evaluation * * As time permits support will be implemented support for a subset of the C * binary operators, starting with '+', '-', '*' and '/'. Support for variables * are provided thru commands 'set' and 'unset' and the unary operator '$'. The * unary '@' operator will indicate function calls. The debugger needs a set of * memory read functions, but we might later extend this to allow registration of * external functions too. * * A special command '?' will then be added which evalutates a given expression * and prints it in all the different formats. * * * @subsection sec_dbg_op_registers Registers * * Registers are addressed using their name. Some registers which have several fields * (like gdtr) will have separate names indicating the different fields. The default * register set is the guest one. To access the hypervisor register one have to * prefix the register names with '.'. * * * @subsection sec_dbg_op_commands Commands * * The commands are all lowercase, case sensitive, and starting with a letter. We will * later add some special commands ('?' for evaulation) and perhaps command classes ('.', '!') * * * @section sec_dbg_tasks Tasks * * To implement DBGT and instrument VMM for basic state inspection and log * viewing, the follwing task must be executed: * * -# Basic threading layer in RT. * -# Basic tcpip server abstration in RT. * -# Write DBGC. * -# Write DBCTCP. * -# Integrate with VMM and the rest. * -# Start writing DBGF (VMM). */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_DBGC #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* to err.h! */ #define VERR_DBGC_QUIT (-11999) #define VERR_PARSE_FIRST (-11000) #define VERR_PARSE_TOO_FEW_ARGUMENTS (VERR_PARSE_FIRST - 0) #define VERR_PARSE_TOO_MANY_ARGUMENTS (VERR_PARSE_FIRST - 1) #define VERR_PARSE_ARGUMENT_OVERFLOW (VERR_PARSE_FIRST - 2) #define VERR_PARSE_ARGUMENT_TYPE_MISMATCH (VERR_PARSE_FIRST - 3) #define VERR_PARSE_NO_RANGE_ALLOWED (VERR_PARSE_FIRST - 4) #define VERR_PARSE_UNBALANCED_QUOTE (VERR_PARSE_FIRST - 5) #define VERR_PARSE_UNBALANCED_PARENTHESIS (VERR_PARSE_FIRST - 6) #define VERR_PARSE_EMPTY_ARGUMENT (VERR_PARSE_FIRST - 7) #define VERR_PARSE_UNEXPECTED_OPERATOR (VERR_PARSE_FIRST - 8) #define VERR_PARSE_INVALID_NUMBER (VERR_PARSE_FIRST - 9) #define VERR_PARSE_NUMBER_TOO_BIG (VERR_PARSE_FIRST - 10) #define VERR_PARSE_INVALID_OPERATION (VERR_PARSE_FIRST - 11) #define VERR_PARSE_FUNCTION_NOT_FOUND (VERR_PARSE_FIRST - 12) #define VERR_PARSE_NOT_A_FUNCTION (VERR_PARSE_FIRST - 13) #define VERR_PARSE_NO_MEMORY (VERR_PARSE_FIRST - 14) #define VERR_PARSE_INCORRECT_ARG_TYPE (VERR_PARSE_FIRST - 15) #define VERR_PARSE_VARIABLE_NOT_FOUND (VERR_PARSE_FIRST - 16) #define VERR_PARSE_CONVERSION_FAILED (VERR_PARSE_FIRST - 17) #define VERR_PARSE_NOT_IMPLEMENTED (VERR_PARSE_FIRST - 18) #define VERR_PARSE_BAD_RESULT_TYPE (VERR_PARSE_FIRST - 19) #define VERR_PARSE_WRITEONLY_SYMBOL (VERR_PARSE_FIRST - 20) #define VERR_PARSE_NO_ARGUMENT_MATCH (VERR_PARSE_FIRST - 21) #define VERR_PARSE_LAST (VERR_PARSE_FIRST - 30) #define VWRN_DBGC_CMD_PENDING 12000 #define VWRN_DBGC_ALREADY_REGISTERED 12001 #define VERR_DBGC_COMMANDS_NOT_REGISTERED (-12002) #define VERR_DBGC_BP_NOT_FOUND (-12003) #define VERR_DBGC_BP_EXISTS (-12004) #define VINF_DBGC_BP_NO_COMMAND 12005 /******************************************************************************* * Defined Constants And Macros * *******************************************************************************/ /** Makes a DBGC variable type pair. * Typically used by binary operators. */ #define BINARY_TYPE_PAIR(type1, type2) (type1 | (type2 << 16)) /******************************************************************************* * Structures and Typedefs * *******************************************************************************/ /** * Debugger console per breakpoint data. */ typedef struct DBGCBP { /** Pointer to the next breakpoint in the list. */ struct DBGCBP *pNext; /** The breakpoint identifier. */ RTUINT iBp; /** The size of the command. */ size_t cchCmd; /** The command to execute when the breakpoint is hit. */ char szCmd[1]; } DBGCBP; /** Pointer to a breakpoint. */ typedef DBGCBP *PDBGCBP; /** * Named variable. * * Always allocated from heap in one signle block. */ typedef struct DBGCNAMEDVAR { /** The variable. */ DBGCVAR Var; /** It's name. */ char szName[1]; } DBGCNAMEDVAR; /** Pointer to named variable. */ typedef DBGCNAMEDVAR *PDBGCNAMEDVAR; /** * Debugger console status */ typedef enum DBGCSTATUS { /** Normal status, .*/ DBGC_HALTED } DBGCSTATUS; /** * Debugger console instance data. */ typedef struct DBGC { /** Command helpers. */ DBGCCMDHLP CmdHlp; /** Pointer to backend callback structure. */ PDBGCBACK pBack; /** Log indicator. (If set we're writing the log to the console.) */ bool fLog; /** Pointer to the current VM. */ PVM pVM; /** Indicates whether or we're ready for input. */ bool fReady; /** Indicates whether we're in guest (true) or hypervisor (false) register context. */ bool fRegCtxGuest; /** Indicates whether the register are terse or sparse. */ bool fRegTerse; /** Input buffer. */ char achInput[2048]; /** To ease debugging. */ unsigned uInputZero; /** Write index in the input buffer. */ unsigned iWrite; /** Read index in the input buffer. */ unsigned iRead; /** The number of lines in the buffer. */ unsigned cInputLines; /** Indicates that we have a buffer overflow condition. * This means that input is ignored up to the next newline. */ bool fInputOverflow; /** Scratch buffer position. */ char *pszScratch; /** Scratch buffer. */ char achScratch[16384]; /** Argument array position. */ unsigned iArg; /** Array of argument variables. */ DBGCVAR aArgs[100]; /** rc from last dbgcHlpPrintfV(). */ int rcOutput; /** Number of variables in papVars. */ unsigned cVars; /** Array of global variables. * Global variables can be referenced using the $ operator and set * and unset using command with those names. */ PDBGCNAMEDVAR *papVars; /** Current dissassembler position. */ DBGCVAR DisasmPos; /** Current source position. (flat GC) */ DBGCVAR SourcePos; /** Current memory dump position. */ DBGCVAR DumpPos; /** Size of the previous dump element. */ unsigned cbDumpElement; /** The list of breakpoints. (singly linked) */ PDBGCBP pFirstBp; } DBGC; /** Pointer to debugger console instance data. */ typedef DBGC *PDBGC; /** Converts a Command Helper pointer to a pointer to DBGC instance data. */ #define DBGC_CMDHLP2DBGC(pCmdHlp) ( (PDBGC)((uintptr_t)(pCmdHlp) - RT_OFFSETOF(DBGC, CmdHlp)) ) /** * Chunk of external commands. */ typedef struct DBGCEXTCMDS { /** Number of commands descriptors. */ unsigned cCmds; /** Pointer to array of command descriptors. */ PCDBGCCMD paCmds; /** Pointer to the next chunk. */ struct DBGCEXTCMDS *pNext; } DBGCEXTCMDS; /** Pointer to chunk of external commands. */ typedef DBGCEXTCMDS *PDBGCEXTCMDS; /** * Unary operator handler function. * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ typedef DECLCALLBACK(int) FNDBGCOPUNARY(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); /** Pointer to a unary operator handler function. */ typedef FNDBGCOPUNARY *PFNDBGCOPUNARY; /** * Binary operator handler function. * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ typedef DECLCALLBACK(int) FNDBGCOPBINARY(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); /** Pointer to a binary operator handler function. */ typedef FNDBGCOPBINARY *PFNDBGCOPBINARY; /** * Operator descriptor. */ typedef struct DBGCOP { /** Operator mnemonic. */ char szName[4]; /** Length of name. */ const unsigned cchName; /** Whether or not this is a binary operator. * Unary operators are evaluated right-to-left while binary are left-to-right. */ bool fBinary; /** Precedence level. */ unsigned iPrecedence; /** Unary operator handler. */ PFNDBGCOPUNARY pfnHandlerUnary; /** Binary operator handler. */ PFNDBGCOPBINARY pfnHandlerBinary; /** Operator description. */ const char *pszDescription; } DBGCOP; /** Pointer to an operator descriptor. */ typedef DBGCOP *PDBGCOP; /** Pointer to a const operator descriptor. */ typedef const DBGCOP *PCDBGCOP; /** Pointer to symbol descriptor. */ typedef struct DBGCSYM *PDBGCSYM; /** Pointer to const symbol descriptor. */ typedef const struct DBGCSYM *PCDBGCSYM; /** * Get builtin symbol. * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pSymDesc Pointer to the symbol descriptor. * @param pCmdHlp Pointer to the command callback structure. * @param enmType The result type. * @param pResult Where to store the result. */ typedef DECLCALLBACK(int) FNDBGCSYMGET(PCDBGCSYM pSymDesc, PDBGCCMDHLP pCmdHlp, DBGCVARTYPE enmType, PDBGCVAR pResult); /** Pointer to get function for a builtin symbol. */ typedef FNDBGCSYMGET *PFNDBGCSYMGET; /** * Set builtin symbol. * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pSymDesc Pointer to the symbol descriptor. * @param pCmdHlp Pointer to the command callback structure. * @param pValue The value to assign the symbol. */ typedef DECLCALLBACK(int) FNDBGCSYMSET(PCDBGCSYM pSymDesc, PDBGCCMDHLP pCmdHlp, PCDBGCVAR pValue); /** Pointer to set function for a builtin symbol. */ typedef FNDBGCSYMSET *PFNDBGCSYMSET; /** * Symbol description (for builtin symbols). */ typedef struct DBGCSYM { /** Symbol name. */ const char *pszName; /** Get function. */ PFNDBGCSYMGET pfnGet; /** Set function. (NULL if readonly) */ PFNDBGCSYMSET pfnSet; /** User data. */ unsigned uUser; } DBGCSYM; /******************************************************************************* * Internal Functions * *******************************************************************************/ static DECLCALLBACK(int) dbgcCmdBrkAccess(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdBrkClear(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdBrkDisable(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdBrkEnable(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdBrkList(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdBrkSet(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdBrkREM(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdHelp(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdQuit(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdGo(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdStop(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdDisasm(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdSource(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdReg(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdRegGuest(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdRegHyper(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdRegTerse(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdTrace(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdStack(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdDumpDT(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdDumpIDT(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdDumpMem(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdDumpPageDir(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdDumpPageDirBoth(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdDumpPageTable(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdDumpPageTableBoth(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdDumpTSS(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdInfo(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdLog(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdLogDest(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdLogFlags(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdMemoryInfo(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdFormat(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdListNear(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdLoadSyms(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdSet(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdUnset(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdLoadVars(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdShowVars(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdHarakiri(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdEcho(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcCmdRunScript(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpMinus(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpPluss(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpBooleanNot(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpBitwiseNot(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpAddrFlat(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpAddrPhys(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpAddrHost(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpAddrHostPhys(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpVar(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpAddrFar(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpMult(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpDiv(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpMod(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpAdd(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpSub(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpBitwiseShiftLeft(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpBitwiseShiftRight(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpBitwiseAnd(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpBitwiseXor(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpBitwiseOr(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpBooleanAnd(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpBooleanOr(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpRangeLength(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpRangeLengthBytes(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcOpRangeTo(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcSymGetReg(PCDBGCSYM pSymDesc, PDBGCCMDHLP pCmdHlp, DBGCVARTYPE enmType, PDBGCVAR pResult); static DECLCALLBACK(int) dbgcSymSetReg(PCDBGCSYM pSymDesc, PDBGCCMDHLP pCmdHlp, PCDBGCVAR pValue); static void dbgcVarSetGCFlat(PDBGCVAR pVar, RTGCPTR GCFlat); static void dbgcVarSetGCFlatByteRange(PDBGCVAR pVar, RTGCPTR GCFlat, uint64_t cb); static void dbgcVarSetVar(PDBGCVAR pVar, PCDBGCVAR pVar2); static void dbgcVarSetNoRange(PDBGCVAR pVar); static void dbgcVarSetByteRange(PDBGCVAR pVar, uint64_t cb); static int dbgcVarToDbgfAddr(PDBGC pDbgc, PCDBGCVAR pVar, PDBGFADDRESS pAddress); static int dbgcBpAdd(PDBGC pDbgc, RTUINT iBp, const char *pszCmd); static int dbgcBpUpdate(PDBGC pDbgc, RTUINT iBp, const char *pszCmd); static int dbgcBpDelete(PDBGC pDbgc, RTUINT iBp); static PDBGCBP dbgcBpGet(PDBGC pDbgc, RTUINT iBp); static int dbgcBpExec(PDBGC pDbgc, RTUINT iBp); static PCDBGCSYM dbgcLookupRegisterSymbol(PDBGC pDbgc, const char *pszSymbol); static int dbgcSymbolGet(PDBGC pDbgc, const char *pszSymbol, DBGCVARTYPE enmType, PDBGCVAR pResult); static int dbgcEvalSub(PDBGC pDbgc, char *pszExpr, size_t cchExpr, PDBGCVAR pResult); static int dbgcProcessCommand(PDBGC pDbgc, char *pszCmd, size_t cchCmd); /******************************************************************************* * Global Variables * *******************************************************************************/ /** * Pointer to head of the list of external commands. */ static PDBGCEXTCMDS g_pExtCmdsHead; /** @todo rw protect g_pExtCmdsHead! */ /** Locks the g_pExtCmdsHead list for reading. */ #define DBGCEXTCMDS_LOCK_RD() do { } while (0) /** Locks the g_pExtCmdsHead list for writing. */ #define DBGCEXTCMDS_LOCK_WR() do { } while (0) /** UnLocks the g_pExtCmdsHead list after reading. */ #define DBGCEXTCMDS_UNLOCK_RD() do { } while (0) /** UnLocks the g_pExtCmdsHead list after writing. */ #define DBGCEXTCMDS_UNLOCK_WR() do { } while (0) /** One argument of any kind. */ static const DBGCVARDESC g_aArgAny[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, 1, DBGCVAR_CAT_ANY, 0, "var", "Any type of argument." }, }; /** Multiple string arguments (min 1). */ static const DBGCVARDESC g_aArgMultiStr[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, ~0, DBGCVAR_CAT_STRING, 0, "strings", "One or more strings." }, }; /** Filename string. */ static const DBGCVARDESC g_aArgFilename[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_STRING, 0, "path", "Filename string." }, }; /** 'ba' arguments. */ static const DBGCVARDESC g_aArgBrkAcc[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_STRING, 0, "access", "The access type: x=execute, rw=read/write (alias r), w=write, i=not implemented." }, { 1, 1, DBGCVAR_CAT_NUMBER, 0, "size", "The access size: 1, 2, 4, or 8. 'x' access requires 1, and 8 requires amd64 long mode." }, { 1, 1, DBGCVAR_CAT_GC_POINTER, 0, "address", "The address." }, { 0, 1, DBGCVAR_CAT_NUMBER, 0, "passes", "The number of passes before we trigger the breakpoint. (0 is default)" }, { 0, 1, DBGCVAR_CAT_NUMBER, DBGCVD_FLAGS_DEP_PREV, "max passes", "The number of passes after which we stop triggering the breakpoint. (~0 is default)" }, { 0, 1, DBGCVAR_CAT_STRING, 0, "cmds", "String of commands to be executed when the breakpoint is hit. Quote it!" }, }; /** 'bc', 'bd', 'be' arguments. */ static const DBGCVARDESC g_aArgBrks[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, ~0, DBGCVAR_CAT_NUMBER, 0, "#bp", "Breakpoint number." }, { 0, 1, DBGCVAR_CAT_STRING, 0, "all", "All breakpoints." }, }; /** 'bp' arguments. */ static const DBGCVARDESC g_aArgBrkSet[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_GC_POINTER, 0, "address", "The address." }, { 0, 1, DBGCVAR_CAT_NUMBER, 0, "passes", "The number of passes before we trigger the breakpoint. (0 is default)" }, { 0, 1, DBGCVAR_CAT_NUMBER, DBGCVD_FLAGS_DEP_PREV, "max passes", "The number of passes after which we stop triggering the breakpoint. (~0 is default)" }, { 0, 1, DBGCVAR_CAT_STRING, 0, "cmds", "String of commands to be executed when the breakpoint is hit. Quote it!" }, }; /** 'br' arguments. */ static const DBGCVARDESC g_aArgBrkREM[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_GC_POINTER, 0, "address", "The address." }, { 0, 1, DBGCVAR_CAT_NUMBER, 0, "passes", "The number of passes before we trigger the breakpoint. (0 is default)" }, { 0, 1, DBGCVAR_CAT_NUMBER, DBGCVD_FLAGS_DEP_PREV, "max passes", "The number of passes after which we stop triggering the breakpoint. (~0 is default)" }, { 0, 1, DBGCVAR_CAT_STRING, 0, "cmds", "String of commands to be executed when the breakpoint is hit. Quote it!" }, }; /** 'd?' arguments. */ static const DBGCVARDESC g_aArgDumpMem[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, 1, DBGCVAR_CAT_POINTER, 0, "address", "Address where to start dumping memory." }, }; /** 'dg', 'dga', 'dl', 'dla' arguments. */ static const DBGCVARDESC g_aArgDumpDT[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, ~0, DBGCVAR_CAT_NUMBER, 0, "sel", "Selector or selector range." }, { 0, ~0, DBGCVAR_CAT_POINTER, 0, "address", "Far address which selector should be dumped." }, }; /** 'di', 'dia' arguments. */ static const DBGCVARDESC g_aArgDumpIDT[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, ~0, DBGCVAR_CAT_NUMBER, 0, "int", "The interrupt vector or interrupt vector range." }, }; /** 'dpd*' arguments. */ static const DBGCVARDESC g_aArgDumpPD[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, 1, DBGCVAR_CAT_NUMBER, 0, "index", "Index into the page directory." }, { 0, 1, DBGCVAR_CAT_POINTER, 0, "address", "Address which page directory entry to start dumping from. Range is applied to the page directory." }, }; /** 'dpda' arguments. */ static const DBGCVARDESC g_aArgDumpPDAddr[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, 1, DBGCVAR_CAT_POINTER, 0, "address", "Address of the page directory entry to start dumping from." }, }; /** 'dpt?' arguments. */ static const DBGCVARDESC g_aArgDumpPT[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_POINTER, 0, "address", "Address which page directory entry to start dumping from." }, }; /** 'dpta' arguments. */ static const DBGCVARDESC g_aArgDumpPTAddr[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_POINTER, 0, "address", "Address of the page table entry to start dumping from." }, }; /** 'dt' arguments. */ static const DBGCVARDESC g_aArgDumpTSS[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, 1, DBGCVAR_CAT_NUMBER, 0, "tss", "TSS selector number." }, { 0, 1, DBGCVAR_CAT_POINTER, 0, "tss:ign|addr", "TSS address. If the selector is a TSS selector, the offset will be ignored." } }; /** 'help' arguments. */ static const DBGCVARDESC g_aArgHelp[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, ~0, DBGCVAR_CAT_STRING, 0, "cmd/op", "Zero or more command or operator names." }, }; /** 'info' arguments. */ static const DBGCVARDESC g_aArgInfo[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_STRING, 0, "info", "The name of the info to display." }, { 0, 1, DBGCVAR_CAT_STRING, 0, "args", "String arguments to the handler." }, }; /** 'ln' arguments. */ static const DBGCVARDESC g_aArgListNear[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, ~0, DBGCVAR_CAT_POINTER, 0, "address", "Address of the symbol to look up." }, { 0, ~0, DBGCVAR_CAT_SYMBOL, 0, "symbol", "Symbol to lookup." }, }; /** 'ln' return. */ static const DBGCVARDESC g_RetListNear = { 1, 1, DBGCVAR_CAT_POINTER, 0, "address", "The last resolved symbol/address with adjusted range." }; /** loadsyms arguments. */ static const DBGCVARDESC g_aArgLoadSyms[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_STRING, 0, "path", "Filename string." }, { 0, 1, DBGCVAR_CAT_NUMBER, 0, "delta", "Delta to add to the loaded symbols. (optional)" }, { 0, 1, DBGCVAR_CAT_STRING, 0, "module name", "Module name." }, { 0, 1, DBGCVAR_CAT_POINTER, DBGCVD_FLAGS_DEP_PREV, "module address", "Module address." }, { 0, 1, DBGCVAR_CAT_NUMBER, 0, "module size", "The module size. (optional)" }, }; /** log arguments. */ static const DBGCVARDESC g_aArgLog[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_STRING, 0, "groups", "Group modifier string (quote it!)." } }; /** logdest arguments. */ static const DBGCVARDESC g_aArgLogDest[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_STRING, 0, "dests", "Destination modifier string (quote it!)." } }; /** logflags arguments. */ static const DBGCVARDESC g_aArgLogFlags[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_STRING, 0, "flags", "Flag modifier string (quote it!)." } }; /** 'm' argument. */ static const DBGCVARDESC g_aArgMemoryInfo[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_POINTER, 0, "address", "Pointer to obtain info about." }, }; /** 'r' arguments. */ static const DBGCVARDESC g_aArgReg[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, 1, DBGCVAR_CAT_SYMBOL, 0, "register", "Register to show or set." }, { 0, 1, DBGCVAR_CAT_NUMBER_NO_RANGE, DBGCVD_FLAGS_DEP_PREV, "value", "New register value." }, }; /** 's' arguments. */ static const DBGCVARDESC g_aArgSource[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, 1, DBGCVAR_CAT_POINTER, 0, "address", "Address where to start looking for source lines." }, }; /** 'set' arguments */ static const DBGCVARDESC g_aArgSet[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 1, 1, DBGCVAR_CAT_STRING, 0, "var", "Variable name." }, { 1, 1, DBGCVAR_CAT_ANY, 0, "value", "Value to assign to the variable." }, }; /** 'u' arguments. */ static const DBGCVARDESC g_aArgDisasm[] = { /* cTimesMin, cTimesMax, enmCategory, fFlags, pszName, pszDescription */ { 0, 1, DBGCVAR_CAT_POINTER, 0, "address", "Address where to start disassembling." }, }; /** Command descriptors. */ static const DBGCCMD g_aCmds[] = { /* pszCmd, cArgsMin, cArgsMax, paArgDescs, cArgDescs, pResultDesc, fFlags, pfnHandler pszSyntax, ....pszDescription */ { "ba", 3, 6, &g_aArgBrkAcc[0], ELEMENTS(g_aArgBrkAcc), NULL, 0, dbgcCmdBrkAccess, "
[passes [max passes]] [cmds]", "Sets a data access breakpoint." }, { "bc", 1, ~0, &g_aArgBrks[0], ELEMENTS(g_aArgBrks), NULL, 0, dbgcCmdBrkClear, "all | [bp# []]", "Enabled a set of breakpoints." }, { "bd", 1, ~0, &g_aArgBrks[0], ELEMENTS(g_aArgBrks), NULL, 0, dbgcCmdBrkDisable, "all | [bp# []]", "Disables a set of breakpoints." }, { "be", 1, ~0, &g_aArgBrks[0], ELEMENTS(g_aArgBrks), NULL, 0, dbgcCmdBrkEnable, "all | [bp# []]", "Enabled a set of breakpoints." }, { "bl", 0, 0, NULL, 0, NULL, 0, dbgcCmdBrkList, "", "Lists all the breakpoints." }, { "bp", 1, 4, &g_aArgBrkSet[0], ELEMENTS(g_aArgBrkSet), NULL, 0, dbgcCmdBrkSet, "
[passes [max passes]] [cmds]", "Sets a breakpoint (int 3)." }, { "br", 1, 4, &g_aArgBrkREM[0], ELEMENTS(g_aArgBrkREM), NULL, 0, dbgcCmdBrkREM, "
[passes [max passes]] [cmds]", "Sets a recompiler specific breakpoint." }, { "bye", 0, 0, NULL, 0, NULL, 0, dbgcCmdQuit, "", "Exits the debugger." }, { "d", 0, 1, &g_aArgDumpMem[0], ELEMENTS(g_aArgDumpMem), NULL, 0, dbgcCmdDumpMem, "[addr]", "Dump memory using last element size." }, { "da", 0, 1, &g_aArgDumpMem[0], ELEMENTS(g_aArgDumpMem), NULL, 0, dbgcCmdDumpMem, "[addr]", "Dump memory as ascii string." }, { "db", 0, 1, &g_aArgDumpMem[0], ELEMENTS(g_aArgDumpMem), NULL, 0, dbgcCmdDumpMem, "[addr]", "Dump memory in bytes." }, { "dd", 0, 1, &g_aArgDumpMem[0], ELEMENTS(g_aArgDumpMem), NULL, 0, dbgcCmdDumpMem, "[addr]", "Dump memory in double words." }, { "dg", 0, ~0, &g_aArgDumpDT[0], ELEMENTS(g_aArgDumpDT), NULL, 0, dbgcCmdDumpDT, "[sel [..]]", "Dump the global descriptor table (GDT)." }, { "dga", 0, ~0, &g_aArgDumpDT[0], ELEMENTS(g_aArgDumpDT), NULL, 0, dbgcCmdDumpDT, "[sel [..]]", "Dump the global descriptor table (GDT) including not-present entries." }, { "di", 0, ~0, &g_aArgDumpIDT[0], ELEMENTS(g_aArgDumpIDT), NULL, 0, dbgcCmdDumpIDT, "[int [..]]", "Dump the interrupt descriptor table (IDT)." }, { "dia", 0, ~0, &g_aArgDumpIDT[0], ELEMENTS(g_aArgDumpIDT), NULL, 0, dbgcCmdDumpIDT, "[int [..]]", "Dump the interrupt descriptor table (IDT) including not-present entries." }, { "dl", 0, ~0, &g_aArgDumpDT[0], ELEMENTS(g_aArgDumpDT), NULL, 0, dbgcCmdDumpDT, "[sel [..]]", "Dump the local descriptor table (LDT)." }, { "dla", 0, ~0, &g_aArgDumpDT[0], ELEMENTS(g_aArgDumpDT), NULL, 0, dbgcCmdDumpDT, "[sel [..]]", "Dump the local descriptor table (LDT) including not-present entries." }, { "dpd", 0, 1, &g_aArgDumpPD[0], ELEMENTS(g_aArgDumpPD), NULL, 0, dbgcCmdDumpPageDir, "[addr] [index]", "Dumps page directory entries of the default context." }, { "dpda", 0, 1, &g_aArgDumpPDAddr[0],ELEMENTS(g_aArgDumpPDAddr),NULL, 0, dbgcCmdDumpPageDir, "[addr]", "Dumps specified page directory." }, { "dpdb", 1, 1, &g_aArgDumpPD[0], ELEMENTS(g_aArgDumpPD), NULL, 0, dbgcCmdDumpPageDirBoth, "[addr] [index]", "Dumps page directory entries of the guest and the hypervisor. " }, { "dpdg", 0, 1, &g_aArgDumpPD[0], ELEMENTS(g_aArgDumpPD), NULL, 0, dbgcCmdDumpPageDir, "[addr] [index]", "Dumps page directory entries of the guest." }, { "dpdh", 0, 1, &g_aArgDumpPD[0], ELEMENTS(g_aArgDumpPD), NULL, 0, dbgcCmdDumpPageDir, "[addr] [index]", "Dumps page directory entries of the hypervisor. " }, { "dpt", 1, 1, &g_aArgDumpPT[0], ELEMENTS(g_aArgDumpPT), NULL, 0, dbgcCmdDumpPageTable,"", "Dumps page table entries of the default context." }, { "dpta", 1, 1, &g_aArgDumpPTAddr[0],ELEMENTS(g_aArgDumpPTAddr), NULL, 0, dbgcCmdDumpPageTable,"", "Dumps specified page table." }, { "dptb", 1, 1, &g_aArgDumpPT[0], ELEMENTS(g_aArgDumpPT), NULL, 0, dbgcCmdDumpPageTableBoth,"", "Dumps page table entries of the guest and the hypervisor." }, { "dptg", 1, 1, &g_aArgDumpPT[0], ELEMENTS(g_aArgDumpPT), NULL, 0, dbgcCmdDumpPageTable,"", "Dumps page table entries of the guest." }, { "dpth", 1, 1, &g_aArgDumpPT[0], ELEMENTS(g_aArgDumpPT), NULL, 0, dbgcCmdDumpPageTable,"", "Dumps page table entries of the hypervisor." }, { "dq", 0, 1, &g_aArgDumpMem[0], ELEMENTS(g_aArgDumpMem), NULL, 0, dbgcCmdDumpMem, "[addr]", "Dump memory in quad words." }, { "dt", 0, 1, &g_aArgDumpTSS[0], ELEMENTS(g_aArgDumpTSS), NULL, 0, dbgcCmdDumpTSS, "[tss|tss:ign|addr]", "Dump the task state segment (TSS)." }, { "dw", 0, 1, &g_aArgDumpMem[0], ELEMENTS(g_aArgDumpMem), NULL, 0, dbgcCmdDumpMem, "[addr]", "Dump memory in words." }, { "echo", 1, ~0, &g_aArgMultiStr[0], ELEMENTS(g_aArgMultiStr), NULL, 0, dbgcCmdEcho, " [str2..[strN]]", "Displays the strings separated by one blank space and the last one followed by a newline." }, { "exit", 0, 0, NULL, 0, NULL, 0, dbgcCmdQuit, "", "Exits the debugger." }, { "format", 1, 1, &g_aArgAny[0], ELEMENTS(g_aArgAny), NULL, 0, dbgcCmdFormat, "", "Evaluates an expression and formats it." }, { "g", 0, 0, NULL, 0, NULL, 0, dbgcCmdGo, "", "Continue execution." }, { "harakiri", 0, 0, NULL, 0, NULL, 0, dbgcCmdHarakiri, "", "Kills debugger process." }, { "help", 0, ~0, &g_aArgHelp[0], ELEMENTS(g_aArgHelp), NULL, 0, dbgcCmdHelp, "[cmd/op [..]]", "Display help. For help about info items try 'info help'." }, { "info", 1, 2, &g_aArgInfo[0], ELEMENTS(g_aArgInfo), NULL, 0, dbgcCmdInfo, " [args]", "Display info register in the DBGF. For a list of info items try 'info help'." }, { "k", 0, 0, NULL, 0, NULL, 0, dbgcCmdStack, "", "Callstack." }, { "kg", 0, 0, NULL, 0, NULL, 0, dbgcCmdStack, "", "Callstack - guest." }, { "kh", 0, 0, NULL, 0, NULL, 0, dbgcCmdStack, "", "Callstack - hypervisor." }, { "ln", 0, ~0, &g_aArgListNear[0], ELEMENTS(g_aArgListNear), &g_RetListNear, 0, dbgcCmdListNear, "[addr/sym [..]]", "List symbols near to the address. Default address is CS:EIP." }, { "loadsyms", 1, 5, &g_aArgLoadSyms[0], ELEMENTS(g_aArgLoadSyms), NULL, 0, dbgcCmdLoadSyms, " [delta] [module] [module address]", "Loads symbols from a text file. Optionally giving a delta and a module." }, { "loadvars", 1, 1, &g_aArgFilename[0], ELEMENTS(g_aArgFilename), NULL, 0, dbgcCmdLoadVars, "", "Load variables from file. One per line, same as the args to the set command." }, { "log", 1, 1, &g_aArgLog[0], ELEMENTS(g_aArgLog), NULL, 0, dbgcCmdLog, "", "Modifies the logging group settings (VBOX_LOG)" }, { "logdest", 1, 1, &g_aArgLogDest[0], ELEMENTS(g_aArgLogDest), NULL, 0, dbgcCmdLogDest, "", "Modifies the logging destination (VBOX_LOG_DEST)." }, { "logflags", 1, 1, &g_aArgLogFlags[0], ELEMENTS(g_aArgLogFlags), NULL, 0, dbgcCmdLogFlags, "", "Modifies the logging flags (VBOX_LOG_FLAGS)." }, { "m", 1, 1, &g_aArgMemoryInfo[0],ELEMENTS(g_aArgMemoryInfo),NULL, 0, dbgcCmdMemoryInfo, "", "Display information about that piece of memory." }, { "quit", 0, 0, NULL, 0, NULL, 0, dbgcCmdQuit, "", "Exits the debugger." }, { "r", 0, 2, &g_aArgReg[0], ELEMENTS(g_aArgReg), NULL, 0, dbgcCmdReg, "[reg [newval]]", "Show or set register(s) - active reg set." }, { "rg", 0, 2, &g_aArgReg[0], ELEMENTS(g_aArgReg), NULL, 0, dbgcCmdRegGuest, "[reg [newval]]", "Show or set register(s) - guest reg set." }, { "rh", 0, 2, &g_aArgReg[0], ELEMENTS(g_aArgReg), NULL, 0, dbgcCmdRegHyper, "[reg [newval]]", "Show or set register(s) - hypervisor reg set." }, { "rt", 0, 0, NULL, 0, NULL, 0, dbgcCmdRegTerse, "", "Toggles terse / verbose register info." }, { "runscript", 1, 1, &g_aArgFilename[0], ELEMENTS(g_aArgFilename), NULL, 0, dbgcCmdRunScript, "", "Runs the command listed in the script. Lines starting with '#' (after removing blanks) are comment. blank lines are ignored. Stops on failure." }, { "s", 0, 1, &g_aArgSource[0], ELEMENTS(g_aArgSource), NULL, 0, dbgcCmdSource, "[addr]", "Source." }, { "set", 2, 2, &g_aArgSet[0], ELEMENTS(g_aArgSet), NULL, 0, dbgcCmdSet, " ", "Sets a global variable." }, { "showvars", 0, 0, NULL, 0, NULL, 0, dbgcCmdShowVars, "", "List all the defined variables." }, { "stop", 0, 0, NULL, 0, NULL, 0, dbgcCmdStop, "", "Stop execution." }, { "t", 0, 0, NULL, 0, NULL, 0, dbgcCmdTrace, "", "Instruction trace (step into)." }, { "u", 0, 1, &g_aArgDisasm[0], ELEMENTS(g_aArgDisasm), NULL, 0, dbgcCmdDisasm, "[addr]", "Disassemble." }, { "unset", 1, ~0, &g_aArgMultiStr[0], ELEMENTS(g_aArgMultiStr), NULL, 0, dbgcCmdUnset, " [var1..[varN]]", "Unsets (delete) one or more global variables." }, }; /** Operators. */ static const DBGCOP g_aOps[] = { /* szName is initialized as a 4 char array because of M$C elsewise optimizing it away in /Ox mode (the 'const char' vs 'char' problem). */ /* szName, cchName, fBinary, iPrecedence, pfnHandlerUnary, pfnHandlerBitwise */ { {'-'}, 1, false, 1, dbgcOpMinus, NULL, "Unary minus." }, { {'+'}, 1, false, 1, dbgcOpPluss, NULL, "Unary pluss." }, { {'!'}, 1, false, 1, dbgcOpBooleanNot, NULL, "Boolean not." }, { {'~'}, 1, false, 1, dbgcOpBitwiseNot, NULL, "Bitwise complement." }, { {':'}, 1, true, 2, NULL, dbgcOpAddrFar, "Far pointer." }, { {'%'}, 1, false, 3, dbgcOpAddrFlat, NULL, "Flat address." }, { {'%','%'}, 2, false, 3, dbgcOpAddrPhys, NULL, "Physical address." }, { {'#'}, 1, false, 3, dbgcOpAddrHost, NULL, "Flat host address." }, { {'#','%','%'}, 3, false, 3, dbgcOpAddrHostPhys, NULL, "Physical host address." }, { {'$'}, 1, false, 3, dbgcOpVar, NULL, "Reference a variable." }, { {'*'}, 1, true, 10, NULL, dbgcOpMult, "Multiplication." }, { {'/'}, 1, true, 11, NULL, dbgcOpDiv, "Division." }, { {'%'}, 1, true, 12, NULL, dbgcOpMod, "Modulus." }, { {'+'}, 1, true, 13, NULL, dbgcOpAdd, "Addition." }, { {'-'}, 1, true, 14, NULL, dbgcOpSub, "Subtraction." }, { {'<','<'}, 2, true, 15, NULL, dbgcOpBitwiseShiftLeft, "Bitwise left shift." }, { {'>','>'}, 2, true, 16, NULL, dbgcOpBitwiseShiftRight, "Bitwise right shift." }, { {'&'}, 1, true, 17, NULL, dbgcOpBitwiseAnd, "Bitwise and." }, { {'^'}, 1, true, 18, NULL, dbgcOpBitwiseXor, "Bitwise exclusiv or." }, { {'|'}, 1, true, 19, NULL, dbgcOpBitwiseOr, "Bitwise inclusive or." }, { {'&','&'}, 2, true, 20, NULL, dbgcOpBooleanAnd, "Boolean and." }, { {'|','|'}, 2, true, 21, NULL, dbgcOpBooleanOr, "Boolean or." }, { {'L'}, 1, true, 22, NULL, dbgcOpRangeLength, "Range elements." }, { {'L','B'}, 2, true, 23, NULL, dbgcOpRangeLengthBytes, "Range bytes." }, { {'T'}, 1, true, 24, NULL, dbgcOpRangeTo, "Range to." } }; /** Bitmap where set bits indicates the characters the may start an operator name. */ static uint32_t g_bmOperatorChars[256 / (4*8)]; /** Register symbol uUser value. * @{ */ /** If set the register set is the hypervisor and not the guest one. */ #define SYMREG_FLAGS_HYPER BIT(20) /** If set a far conversion of the value will use the high 16 bit for the selector. * If clear the low 16 bit will be used. */ #define SYMREG_FLAGS_HIGH_SEL BIT(21) /** The shift value to calc the size of a register symbol from the uUser value. */ #define SYMREG_SIZE_SHIFT (24) /** Get the offset */ #define SYMREG_OFFSET(uUser) (uUser & ((1 << 20) - 1)) /** Get the size. */ #define SYMREG_SIZE(uUser) ((uUser >> SYMREG_SIZE_SHIFT) & 0xff) /** 1 byte. */ #define SYMREG_SIZE_1 ( 1 << SYMREG_SIZE_SHIFT) /** 2 byte. */ #define SYMREG_SIZE_2 ( 2 << SYMREG_SIZE_SHIFT) /** 4 byte. */ #define SYMREG_SIZE_4 ( 4 << SYMREG_SIZE_SHIFT) /** 6 byte. */ #define SYMREG_SIZE_6 ( 6 << SYMREG_SIZE_SHIFT) /** 8 byte. */ #define SYMREG_SIZE_8 ( 8 << SYMREG_SIZE_SHIFT) /** 12 byte. */ #define SYMREG_SIZE_12 (12 << SYMREG_SIZE_SHIFT) /** 16 byte. */ #define SYMREG_SIZE_16 (16 << SYMREG_SIZE_SHIFT) /** @} */ /** Builtin Symbols. * ASSUMES little endian register representation! */ static const DBGCSYM g_aSyms[] = { { "eax", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eax) | SYMREG_SIZE_4 }, { "ax", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eax) | SYMREG_SIZE_2 }, { "al", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eax) | SYMREG_SIZE_1 }, { "ah", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eax) + 1 | SYMREG_SIZE_1 }, { "ebx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebx) | SYMREG_SIZE_4 }, { "bx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebx) | SYMREG_SIZE_2 }, { "bl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebx) | SYMREG_SIZE_1 }, { "bh", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebx) + 1 | SYMREG_SIZE_1 }, { "ecx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ecx) | SYMREG_SIZE_4 }, { "cx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ecx) | SYMREG_SIZE_2 }, { "cl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ecx) | SYMREG_SIZE_1 }, { "ch", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ecx) + 1 | SYMREG_SIZE_1 }, { "edx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edx) | SYMREG_SIZE_4 }, { "dx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edx) | SYMREG_SIZE_2 }, { "dl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edx) | SYMREG_SIZE_1 }, { "dh", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edx) + 1 | SYMREG_SIZE_1 }, { "edi", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edi) | SYMREG_SIZE_4 }, { "di", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edi) | SYMREG_SIZE_2 }, { "esi", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, esi) | SYMREG_SIZE_4 }, { "si", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, esi) | SYMREG_SIZE_2 }, { "ebp", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebp) | SYMREG_SIZE_4 }, { "bp", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebp) | SYMREG_SIZE_2 }, { "esp", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, esp) | SYMREG_SIZE_4 }, { "sp", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, esp) | SYMREG_SIZE_2 }, { "eip", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eip) | SYMREG_SIZE_4 }, { "ip", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eip) | SYMREG_SIZE_2 }, { "efl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eflags) | SYMREG_SIZE_4 }, { "eflags", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eflags) | SYMREG_SIZE_4 }, { "fl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eflags) | SYMREG_SIZE_2 }, { "flags", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eflags) | SYMREG_SIZE_2 }, { "cs", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cs) | SYMREG_SIZE_2 }, { "ds", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ds) | SYMREG_SIZE_2 }, { "es", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, es) | SYMREG_SIZE_2 }, { "fs", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, fs) | SYMREG_SIZE_2 }, { "gs", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, gs) | SYMREG_SIZE_2 }, { "ss", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ss) | SYMREG_SIZE_2 }, { "cr0", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cr0) | SYMREG_SIZE_4 }, { "cr2", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cr2) | SYMREG_SIZE_4 }, { "cr3", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cr3) | SYMREG_SIZE_4 }, { "cr4", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cr4) | SYMREG_SIZE_4 }, { "tr", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, tr) | SYMREG_SIZE_2 }, { "ldtr", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ldtr) | SYMREG_SIZE_2 }, { "gdtr", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, gdtr) | SYMREG_SIZE_6 }, { "gdtr.limit", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, gdtr.cbGdt)| SYMREG_SIZE_2 }, { "gdtr.base", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, gdtr.pGdt)| SYMREG_SIZE_4 }, { "idtr", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, idtr) | SYMREG_SIZE_6 }, { "idtr.limit", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, idtr.cbIdt)| SYMREG_SIZE_2 }, { "idtr.base", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, idtr.pIdt)| SYMREG_SIZE_4 }, /* hypervisor */ {".eax", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eax) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".ax", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eax) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".al", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eax) | SYMREG_SIZE_1 | SYMREG_FLAGS_HYPER }, {".ah", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eax) + 1 | SYMREG_SIZE_1 | SYMREG_FLAGS_HYPER }, {".ebx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebx) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".bx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebx) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".bl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebx) | SYMREG_SIZE_1 | SYMREG_FLAGS_HYPER }, {".bh", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebx) + 1 | SYMREG_SIZE_1 | SYMREG_FLAGS_HYPER }, {".ecx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ecx) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".cx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ecx) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".cl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ecx) | SYMREG_SIZE_1 | SYMREG_FLAGS_HYPER }, {".ch", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ecx) + 1 | SYMREG_SIZE_1 | SYMREG_FLAGS_HYPER }, {".edx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edx) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".dx", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edx) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".dl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edx) | SYMREG_SIZE_1 | SYMREG_FLAGS_HYPER }, {".dh", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edx) + 1 | SYMREG_SIZE_1 | SYMREG_FLAGS_HYPER }, {".edi", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edi) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".di", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, edi) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".esi", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, esi) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".si", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, esi) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".ebp", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebp) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".bp", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ebp) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".esp", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, esp) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".sp", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, esp) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".eip", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eip) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".ip", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eip) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".efl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eflags) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".eflags", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eflags) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".fl", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eflags) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".flags", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, eflags) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".cs", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cs) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".ds", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ds) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".es", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, es) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".fs", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, fs) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".gs", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, gs) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".ss", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ss) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".cr0", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cr0) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".cr2", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cr2) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".cr3", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cr3) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".cr4", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, cr4) | SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".tr", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, tr) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".ldtr", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, ldtr) | SYMREG_SIZE_2 | SYMREG_FLAGS_HYPER }, {".gdtr", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, gdtr) | SYMREG_SIZE_6 | SYMREG_FLAGS_HYPER }, {".gdtr.limit", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, gdtr.cbGdt)| SYMREG_SIZE_2| SYMREG_FLAGS_HYPER }, {".gdtr.base", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, gdtr.pGdt)| SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, {".idtr", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, idtr) | SYMREG_SIZE_6 | SYMREG_FLAGS_HYPER }, {".idtr.limit", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, idtr.cbIdt)| SYMREG_SIZE_2| SYMREG_FLAGS_HYPER }, {".idtr.base", dbgcSymGetReg, dbgcSymSetReg, offsetof(CPUMCTX, idtr.pIdt)| SYMREG_SIZE_4 | SYMREG_FLAGS_HYPER }, }; /** * Prints full command help. */ static int dbgcPrintHelp(PDBGCCMDHLP pCmdHlp, PCDBGCCMD pCmd, bool fExternal) { int rc; /* the command */ rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%s%-*s %-30s %s", fExternal ? "." : "", fExternal ? 10 : 11, pCmd->pszCmd, pCmd->pszSyntax, pCmd->pszDescription); if (!pCmd->cArgsMin && pCmd->cArgsMin == pCmd->cArgsMax) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " \n"); else if (pCmd->cArgsMin == pCmd->cArgsMax) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " <%u args>\n", pCmd->cArgsMin); else if (pCmd->cArgsMax == ~0U) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " <%u+ args>\n", pCmd->cArgsMin); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " <%u to %u args>\n", pCmd->cArgsMin, pCmd->cArgsMax); /* argument descriptions. */ for (unsigned i = 0; i < pCmd->cArgDescs; i++) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " %-12s %s", pCmd->paArgDescs[i].pszName, pCmd->paArgDescs[i].pszDescription); if (!pCmd->paArgDescs[i].cTimesMin) { if (pCmd->paArgDescs[i].cTimesMax == ~0U) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " \n"); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " \n", pCmd->paArgDescs[i].cTimesMax); } else { if (pCmd->paArgDescs[i].cTimesMax == ~0U) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " <%u+>\n", pCmd->paArgDescs[i].cTimesMin); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " <%u-%u>\n", pCmd->paArgDescs[i].cTimesMin, pCmd->paArgDescs[i].cTimesMax); } } return rc; } /** * The 'help' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdHelp(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { int rc = VINF_SUCCESS; unsigned i; if (!cArgs) { /* * All the stuff. */ rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "VirtualBox Debugger\n" "-------------------\n" "\n" "Commands and Functions:\n"); for (i = 0; i < ELEMENTS(g_aCmds); i++) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%-11s %-30s %s\n", g_aCmds[i].pszCmd, g_aCmds[i].pszSyntax, g_aCmds[i].pszDescription); if (g_pExtCmdsHead) { DBGCEXTCMDS_LOCK_RD(); rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "\n" "External Commands and Functions:\n"); for (PDBGCEXTCMDS pExtCmd = g_pExtCmdsHead; pExtCmd; pExtCmd = pExtCmd->pNext) for (i = 0; i < pExtCmd->cCmds; i++) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, ".%-10s %-30s %s\n", pExtCmd->paCmds[i].pszCmd, pExtCmd->paCmds[i].pszSyntax, pExtCmd->paCmds[i].pszDescription); DBGCEXTCMDS_UNLOCK_RD(); } rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "\n" "Operators:\n"); unsigned iPrecedence = 0; unsigned cLeft = ELEMENTS(g_aOps); while (cLeft > 0) { for (i = 0; i < ELEMENTS(g_aOps); i++) if (g_aOps[i].iPrecedence == iPrecedence) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%-10s %s %s\n", g_aOps[i].szName, g_aOps[i].fBinary ? "Binary" : "Unary ", g_aOps[i].pszDescription); cLeft--; } iPrecedence++; } } else { /* * Search for the arguments (strings). */ for (unsigned iArg = 0; iArg < cArgs; iArg++) { Assert(paArgs[iArg].enmType == DBGCVAR_TYPE_STRING); /* lookup in the command list */ bool fFound = false; for (i = 0; i < ELEMENTS(g_aCmds); i++) if (!strcmp(g_aCmds[i].pszCmd, paArgs[iArg].u.pszString)) { rc = dbgcPrintHelp(pCmdHlp, &g_aCmds[i], false); fFound = true; break; } /* external commands */ if ( !fFound && g_pExtCmdsHead && paArgs[iArg].u.pszString[0] == '.') { DBGCEXTCMDS_LOCK_RD(); for (PDBGCEXTCMDS pExtCmd = g_pExtCmdsHead; pExtCmd; pExtCmd = pExtCmd->pNext) for (i = 0; i < pExtCmd->cCmds; i++) if (!strcmp(pExtCmd->paCmds[i].pszCmd, paArgs[iArg].u.pszString + 1)) { rc = dbgcPrintHelp(pCmdHlp, &g_aCmds[i], true); fFound = true; break; } DBGCEXTCMDS_UNLOCK_RD(); } /* operators */ if (!fFound && strlen(paArgs[iArg].u.pszString) < sizeof(g_aOps[i].szName)) { for (i = 0; i < ELEMENTS(g_aOps); i++) if (!strcmp(g_aOps[i].szName, paArgs[iArg].u.pszString)) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%-10s %s %s\n", g_aOps[i].szName, g_aOps[i].fBinary ? "Binary" : "Unary ", g_aOps[i].pszDescription); fFound = true; break; } } /* found? */ if (!fFound) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: '%s' was not found!\n", paArgs[iArg].u.pszString); } /* foreach argument */ } NOREF(pCmd); NOREF(pVM); NOREF(pResult); return rc; } /** * The 'quit', 'exit' and 'bye' commands. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdQuit(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Quitting console...\n"); NOREF(pCmd); NOREF(pVM); NOREF(paArgs); NOREF(cArgs); NOREF(pResult); return VERR_DBGC_QUIT; } /** * The 'go' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdGo(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { /* * Check if the VM is halted or not before trying to resume it. */ if (!DBGFR3IsHalted(pVM)) pCmdHlp->pfnPrintf(pCmdHlp, NULL, "warning: The VM is already running...\n"); else { int rc = DBGFR3Resume(pVM); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Executing DBGFR3Resume()."); } NOREF(pCmd); NOREF(paArgs); NOREF(cArgs); NOREF(pResult); return 0; } /** * The 'stop' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdStop(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { /* * Check if the VM is halted or not before trying to halt it. */ int rc; if (DBGFR3IsHalted(pVM)) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "warning: The VM is already halted...\n"); else { rc = DBGFR3Halt(pVM); if (VBOX_SUCCESS(rc)) rc = VWRN_DBGC_CMD_PENDING; else rc = pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Executing DBGFR3Halt()."); } NOREF(pCmd); NOREF(paArgs); NOREF(cArgs); NOREF(pResult); return rc; } /** * The 'ba' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdBrkAccess(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR /*pResult*/) { /* * Interpret access type. */ if ( !strchr("xrwi", paArgs[0].u.pszString[0]) || paArgs[0].u.pszString[1]) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Invalid access type '%s' for '%s'. Valid types are 'e', 'r', 'w' and 'i'.\n", paArgs[0].u.pszString, pCmd->pszCmd); uint8_t fType = 0; switch (paArgs[0].u.pszString[0]) { case 'x': fType = X86_DR7_RW_EO; break; case 'r': fType = X86_DR7_RW_RW; break; case 'w': fType = X86_DR7_RW_WO; break; case 'i': fType = X86_DR7_RW_IO; break; } /* * Validate size. */ if (fType == X86_DR7_RW_EO && paArgs[1].u.u64Number != 1) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Invalid access size %RX64 for '%s'. 'x' access type requires size 1!\n", paArgs[1].u.u64Number, pCmd->pszCmd); switch (paArgs[1].u.u64Number) { case 1: case 2: case 4: break; /*case 8: - later*/ default: return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Invalid access size %RX64 for '%s'. 1, 2 or 4!\n", paArgs[1].u.u64Number, pCmd->pszCmd); } uint8_t cb = (uint8_t)paArgs[1].u.u64Number; /* * Convert the pointer to a DBGF address. */ DBGFADDRESS Address; int rc = pCmdHlp->pfnVarToDbgfAddr(pCmdHlp, &paArgs[2], &Address); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Couldn't convert '%DV' to a DBGF address, rc=%Vrc.\n", &paArgs[2], rc); /* * Pick out the optional arguments. */ uint64_t iHitTrigger = 0; uint64_t iHitDisable = ~0; const char *pszCmds = NULL; unsigned iArg = 3; if (iArg < cArgs && paArgs[iArg].enmType == DBGCVAR_TYPE_NUMBER) { iHitTrigger = paArgs[iArg].u.u64Number; iArg++; if (iArg < cArgs && paArgs[iArg].enmType == DBGCVAR_TYPE_NUMBER) { iHitDisable = paArgs[iArg].u.u64Number; iArg++; } } if (iArg < cArgs && paArgs[iArg].enmType == DBGCVAR_TYPE_STRING) { pszCmds = paArgs[iArg].u.pszString; iArg++; } /* * Try set the breakpoint. */ RTUINT iBp; rc = DBGFR3BpSetReg(pVM, &Address, iHitTrigger, iHitDisable, fType, cb, &iBp); if (VBOX_SUCCESS(rc)) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); rc = dbgcBpAdd(pDbgc, iBp, pszCmds); if (VBOX_SUCCESS(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Set access breakpoint %u at %VGv\n", iBp, Address.FlatPtr); if (rc == VERR_DBGC_BP_EXISTS) { rc = dbgcBpUpdate(pDbgc, iBp, pszCmds); if (VBOX_SUCCESS(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Updated access breakpoint %u at %VGv\n", iBp, Address.FlatPtr); } int rc2 = DBGFR3BpClear(pDbgc->pVM, iBp); AssertRC(rc2); } return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Failed to set access breakpoint at %VGv, rc=%Vrc.\n", Address.FlatPtr, rc); } /** * The 'bc' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdBrkClear(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR /*pResult*/) { /* * Enumerate the arguments. */ PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); int rc = VINF_SUCCESS; for (unsigned iArg = 0; iArg < cArgs && VBOX_SUCCESS(rc); iArg++) { if (paArgs[iArg].enmType != DBGCVAR_TYPE_STRING) { /* one */ RTUINT iBp = (RTUINT)paArgs[iArg].u.u64Number; if (iBp != paArgs[iArg].u.u64Number) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Breakpoint id %RX64 is too large!\n", paArgs[iArg].u.u64Number); break; } int rc2 = DBGFR3BpClear(pVM, iBp); if (VBOX_FAILURE(rc2)) rc = pCmdHlp->pfnVBoxError(pCmdHlp, rc2, "DBGFR3BpClear failed for breakpoint %u!\n", iBp); if (VBOX_SUCCESS(rc2) || rc2 == VERR_DBGF_BP_NOT_FOUND) dbgcBpDelete(pDbgc, iBp); } else if (!strcmp(paArgs[iArg].u.pszString, "all")) { /* all */ PDBGCBP pBp = pDbgc->pFirstBp; while (pBp) { RTUINT iBp = pBp->iBp; pBp = pBp->pNext; int rc2 = DBGFR3BpClear(pVM, iBp); if (VBOX_FAILURE(rc2)) rc = pCmdHlp->pfnVBoxError(pCmdHlp, rc2, "DBGFR3BpClear failed for breakpoint %u!\n", iBp); if (VBOX_SUCCESS(rc2) || rc2 == VERR_DBGF_BP_NOT_FOUND) dbgcBpDelete(pDbgc, iBp); } } else { /* invalid parameter */ rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Invalid argument '%s' to '%s'!\n", paArgs[iArg].u.pszString, pCmd->pszCmd); break; } } return rc; } /** * The 'bd' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdBrkDisable(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR /*pResult*/) { /* * Enumerate the arguments. */ int rc = VINF_SUCCESS; for (unsigned iArg = 0; iArg < cArgs && VBOX_SUCCESS(rc); iArg++) { if (paArgs[iArg].enmType != DBGCVAR_TYPE_STRING) { /* one */ RTUINT iBp = (RTUINT)paArgs[iArg].u.u64Number; if (iBp != paArgs[iArg].u.u64Number) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Breakpoint id %RX64 is too large!\n", paArgs[iArg].u.u64Number); break; } rc = DBGFR3BpDisable(pVM, iBp); if (VBOX_FAILURE(rc)) rc = pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3BpDisable failed for breakpoint %u!\n", iBp); } else if (!strcmp(paArgs[iArg].u.pszString, "all")) { /* all */ PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); for (PDBGCBP pBp = pDbgc->pFirstBp; pBp; pBp = pBp->pNext) { rc = DBGFR3BpDisable(pVM, pBp->iBp); if (VBOX_FAILURE(rc)) rc = pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3BpDisable failed for breakpoint %u!\n", pBp->iBp); } } else { /* invalid parameter */ rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Invalid argument '%s' to '%s'!\n", paArgs[iArg].u.pszString, pCmd->pszCmd); break; } } return rc; } /** * The 'be' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdBrkEnable(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR /*pResult*/) { /* * Enumerate the arguments. */ int rc = VINF_SUCCESS; for (unsigned iArg = 0; iArg < cArgs && VBOX_SUCCESS(rc); iArg++) { if (paArgs[iArg].enmType != DBGCVAR_TYPE_STRING) { /* one */ RTUINT iBp = (RTUINT)paArgs[iArg].u.u64Number; if (iBp != paArgs[iArg].u.u64Number) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Breakpoint id %RX64 is too large!\n", paArgs[iArg].u.u64Number); break; } rc = DBGFR3BpEnable(pVM, iBp); if (VBOX_FAILURE(rc)) rc = pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3BpEnable failed for breakpoint %u!\n", iBp); } else if (!strcmp(paArgs[iArg].u.pszString, "all")) { /* all */ PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); for (PDBGCBP pBp = pDbgc->pFirstBp; pBp; pBp = pBp->pNext) { rc = DBGFR3BpEnable(pVM, pBp->iBp); if (VBOX_FAILURE(rc)) rc = pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3BpEnable failed for breakpoint %u!\n", pBp->iBp); } } else { /* invalid parameter */ rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Invalid argument '%s' to '%s'!\n", paArgs[iArg].u.pszString, pCmd->pszCmd); break; } } return rc; } /** * Breakpoint enumeration callback function. * * @returns VBox status code. Any failure will stop the enumeration. * @param pVM The VM handle. * @param pvUser The user argument. * @param pBp Pointer to the breakpoint information. (readonly) */ static DECLCALLBACK(int) dbgcEnumBreakpointsCallback(PVM pVM, void *pvUser, PCDBGFBP pBp) { PDBGC pDbgc = (PDBGC)pvUser; PDBGCBP pDbgcBp = dbgcBpGet(pDbgc, pBp->iBp); /* * BP type and size. */ char chType; char cb = 1; switch (pBp->enmType) { case DBGFBPTYPE_INT3: chType = 'p'; break; case DBGFBPTYPE_REG: switch (pBp->u.Reg.fType) { case X86_DR7_RW_EO: chType = 'x'; break; case X86_DR7_RW_WO: chType = 'w'; break; case X86_DR7_RW_IO: chType = 'i'; break; case X86_DR7_RW_RW: chType = 'r'; break; default: chType = '?'; break; } cb = pBp->u.Reg.cb; break; case DBGFBPTYPE_REM: chType = 'r'; break; default: chType = '?'; break; } pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "%2u %c %d %c %VGv %04RX64 (%04RX64 to ", pBp->iBp, pBp->fEnabled ? 'e' : 'd', cb, chType, pBp->GCPtr, pBp->cHits, pBp->iHitTrigger); if (pBp->iHitDisable == ~(uint64_t)0) pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "~0) "); else pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "%04RX64)"); /* * Try resolve the address. */ DBGFSYMBOL Sym; RTGCINTPTR off; int rc = DBGFR3SymbolByAddr(pVM, pBp->GCPtr, &off, &Sym); if (VBOX_SUCCESS(rc)) { if (!off) pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "%s", Sym.szName); else if (off > 0) pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "%s+%VGv", Sym.szName, off); else pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "%s+%VGv", Sym.szName, -off); } /* * The commands. */ if (pDbgcBp) { if (pDbgcBp->cchCmd) pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\n cmds: '%s'\n", pDbgcBp->szCmd); else pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\n"); } else pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, " [unknown bp]\n"); return VINF_SUCCESS; } /** * The 'bl' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdBrkList(PCDBGCCMD /*pCmd*/, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR /*paArgs*/, unsigned /*cArgs*/, PDBGCVAR /*pResult*/) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Enumerate the breakpoints. */ int rc = DBGFR3BpEnum(pVM, dbgcEnumBreakpointsCallback, pDbgc); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3BpEnum failed.\n"); return rc; } /** * The 'bp' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdBrkSet(PCDBGCCMD /*pCmd*/, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR /*pResult*/) { /* * Convert the pointer to a DBGF address. */ DBGFADDRESS Address; int rc = pCmdHlp->pfnVarToDbgfAddr(pCmdHlp, &paArgs[0], &Address); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Couldn't convert '%DV' to a DBGF address, rc=%Vrc.\n", &paArgs[0], rc); /* * Pick out the optional arguments. */ uint64_t iHitTrigger = 0; uint64_t iHitDisable = ~0; const char *pszCmds = NULL; unsigned iArg = 1; if (iArg < cArgs && paArgs[iArg].enmType == DBGCVAR_TYPE_NUMBER) { iHitTrigger = paArgs[iArg].u.u64Number; iArg++; if (iArg < cArgs && paArgs[iArg].enmType == DBGCVAR_TYPE_NUMBER) { iHitDisable = paArgs[iArg].u.u64Number; iArg++; } } if (iArg < cArgs && paArgs[iArg].enmType == DBGCVAR_TYPE_STRING) { pszCmds = paArgs[iArg].u.pszString; iArg++; } /* * Try set the breakpoint. */ RTUINT iBp; rc = DBGFR3BpSet(pVM, &Address, iHitTrigger, iHitDisable, &iBp); if (VBOX_SUCCESS(rc)) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); rc = dbgcBpAdd(pDbgc, iBp, pszCmds); if (VBOX_SUCCESS(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Set breakpoint %u at %VGv\n", iBp, Address.FlatPtr); if (rc == VERR_DBGC_BP_EXISTS) { rc = dbgcBpUpdate(pDbgc, iBp, pszCmds); if (VBOX_SUCCESS(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Updated breakpoint %u at %VGv\n", iBp, Address.FlatPtr); } int rc2 = DBGFR3BpClear(pDbgc->pVM, iBp); AssertRC(rc2); } return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Failed to set breakpoint at %VGv, rc=%Vrc.\n", Address.FlatPtr, rc); } /** * The 'br' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdBrkREM(PCDBGCCMD /*pCmd*/, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR /*pResult*/) { /* * Convert the pointer to a DBGF address. */ DBGFADDRESS Address; int rc = pCmdHlp->pfnVarToDbgfAddr(pCmdHlp, &paArgs[0], &Address); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Couldn't convert '%DV' to a DBGF address, rc=%Vrc.\n", &paArgs[0], rc); /* * Pick out the optional arguments. */ uint64_t iHitTrigger = 0; uint64_t iHitDisable = ~0; const char *pszCmds = NULL; unsigned iArg = 1; if (iArg < cArgs && paArgs[iArg].enmType == DBGCVAR_TYPE_NUMBER) { iHitTrigger = paArgs[iArg].u.u64Number; iArg++; if (iArg < cArgs && paArgs[iArg].enmType == DBGCVAR_TYPE_NUMBER) { iHitDisable = paArgs[iArg].u.u64Number; iArg++; } } if (iArg < cArgs && paArgs[iArg].enmType == DBGCVAR_TYPE_STRING) { pszCmds = paArgs[iArg].u.pszString; iArg++; } /* * Try set the breakpoint. */ RTUINT iBp; rc = DBGFR3BpSetREM(pVM, &Address, iHitTrigger, iHitDisable, &iBp); if (VBOX_SUCCESS(rc)) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); rc = dbgcBpAdd(pDbgc, iBp, pszCmds); if (VBOX_SUCCESS(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Set REM breakpoint %u at %VGv\n", iBp, Address.FlatPtr); if (rc == VERR_DBGC_BP_EXISTS) { rc = dbgcBpUpdate(pDbgc, iBp, pszCmds); if (VBOX_SUCCESS(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Updated REM breakpoint %u at %VGv\n", iBp, Address.FlatPtr); } int rc2 = DBGFR3BpClear(pDbgc->pVM, iBp); AssertRC(rc2); } return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Failed to set REM breakpoint at %VGv, rc=%Vrc.\n", Address.FlatPtr, rc); } /** * The 'u' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdDisasm(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Validate input. */ if ( cArgs > 1 || (cArgs == 1 && !DBGCVAR_ISPOINTER(paArgs[0].enmType))) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "internal error: The parser doesn't do its job properly yet.. It might help to use the '%%' operator.\n"); if (!pVM && !cArgs && !DBGCVAR_ISPOINTER(pDbgc->DisasmPos.enmType)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Don't know where to start disassembling...\n"); if (!pVM && cArgs && DBGCVAR_ISGCPOINTER(paArgs[0].enmType)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: GC address but no VM.\n"); /* * Find address. */ unsigned fFlags = DBGF_DISAS_FLAGS_NO_ADDRESS; if (!cArgs) { if (!DBGCVAR_ISPOINTER(pDbgc->DisasmPos.enmType)) { pDbgc->DisasmPos.enmType = DBGCVAR_TYPE_GC_FAR; pDbgc->SourcePos.u.GCFar.off = pDbgc->fRegCtxGuest ? CPUMGetGuestEIP(pVM) : CPUMGetHyperEIP(pVM); pDbgc->SourcePos.u.GCFar.sel = pDbgc->fRegCtxGuest ? CPUMGetGuestCS(pVM) : CPUMGetHyperCS(pVM); if (pDbgc->fRegCtxGuest) fFlags |= DBGF_DISAS_FLAGS_CURRENT_GUEST; else fFlags |= DBGF_DISAS_FLAGS_CURRENT_HYPER; } pDbgc->DisasmPos.enmRangeType = DBGCVAR_RANGE_NONE; } else pDbgc->DisasmPos = paArgs[0]; /* * Range. */ switch (pDbgc->DisasmPos.enmRangeType) { case DBGCVAR_RANGE_NONE: pDbgc->DisasmPos.enmRangeType = DBGCVAR_RANGE_ELEMENTS; pDbgc->DisasmPos.u64Range = 10; break; case DBGCVAR_RANGE_ELEMENTS: if (pDbgc->DisasmPos.u64Range > 2048) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Too many lines requested. Max is 2048 lines.\n"); break; case DBGCVAR_RANGE_BYTES: if (pDbgc->DisasmPos.u64Range > 65536) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: The requested range is too big. Max is 64KB.\n"); break; default: return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "internal error: Unknown range type %d.\n", pDbgc->DisasmPos.enmRangeType); } /* * Convert physical and host addresses to guest addresses. */ int rc; switch (pDbgc->DisasmPos.enmType) { case DBGCVAR_TYPE_GC_FLAT: case DBGCVAR_TYPE_GC_FAR: break; case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_PHYS: case DBGCVAR_TYPE_HC_FAR: { DBGCVAR VarTmp; rc = pCmdHlp->pfnEval(pCmdHlp, &VarTmp, "%%(%Dv)", &pDbgc->DisasmPos); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: failed to evaluate '%%(%Dv)' -> %Vrc .\n", pDbgc->DisasmPos, rc); pDbgc->DisasmPos = VarTmp; break; } default: AssertFailed(); break; } /* * Print address. * todo: Change to list near. */ #if 0 rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%DV:\n", &pDbgc->DisasmPos); if (VBOX_FAILURE(rc)) return rc; #endif /* * Do the disassembling. */ unsigned cTries = 32; int iRangeLeft = (int)pDbgc->DisasmPos.u64Range; if (iRangeLeft == 0) /* klugde for 'r'. */ iRangeLeft = -1; for (;;) { /* * Disassemble the instruction. */ char szDis[256]; uint32_t cbInstr = 1; if (pDbgc->DisasmPos.enmType == DBGCVAR_TYPE_GC_FLAT) rc = DBGFR3DisasInstrEx(pVM, DBGF_SEL_FLAT, pDbgc->DisasmPos.u.GCFlat, fFlags, &szDis[0], sizeof(szDis), &cbInstr); else rc = DBGFR3DisasInstrEx(pVM, pDbgc->DisasmPos.u.GCFar.sel, pDbgc->DisasmPos.u.GCFar.off, fFlags, &szDis[0], sizeof(szDis), &cbInstr); if (VBOX_SUCCESS(rc)) { /* print it */ rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%-16DV %s\n", &pDbgc->DisasmPos, &szDis[0]); if (VBOX_FAILURE(rc)) return rc; } else { /* bitch. */ int rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Failed to disassemble instruction, skipping one byte.\n"); if (VBOX_FAILURE(rc)) return rc; if (cTries-- > 0) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Too many disassembly failures. Giving up.\n"); cbInstr = 1; } /* advance */ if (iRangeLeft < 0) /* 'r' */ break; if (pDbgc->DisasmPos.enmRangeType == DBGCVAR_RANGE_ELEMENTS) iRangeLeft--; else iRangeLeft -= cbInstr; rc = pCmdHlp->pfnEval(pCmdHlp, &pDbgc->DisasmPos, "(%Dv) + %x", &pDbgc->DisasmPos, cbInstr); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Expression: (%Dv) + %x\n", &pDbgc->DisasmPos, cbInstr); if (iRangeLeft <= 0) break; fFlags &= ~(DBGF_DISAS_FLAGS_CURRENT_GUEST | DBGF_DISAS_FLAGS_CURRENT_HYPER); } NOREF(pCmd); NOREF(pResult); return 0; } /** * The 's' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdSource(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Validate input. */ if ( cArgs > 1 || (cArgs == 1 && !DBGCVAR_ISPOINTER(paArgs[0].enmType))) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "internal error: The parser doesn't do its job properly yet.. It might help to use the '%%' operator.\n"); if (!pVM && !cArgs && !DBGCVAR_ISPOINTER(pDbgc->SourcePos.enmType)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Don't know where to start disassembling...\n"); if (!pVM && cArgs && DBGCVAR_ISGCPOINTER(paArgs[0].enmType)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: GC address but no VM.\n"); /* * Find address. */ if (!cArgs) { if (!DBGCVAR_ISPOINTER(pDbgc->SourcePos.enmType)) { pDbgc->SourcePos.enmType = DBGCVAR_TYPE_GC_FAR; pDbgc->SourcePos.u.GCFar.off = pDbgc->fRegCtxGuest ? CPUMGetGuestEIP(pVM) : CPUMGetHyperEIP(pVM); pDbgc->SourcePos.u.GCFar.sel = pDbgc->fRegCtxGuest ? CPUMGetGuestCS(pVM) : CPUMGetHyperCS(pVM); } pDbgc->SourcePos.enmRangeType = DBGCVAR_RANGE_NONE; } else pDbgc->SourcePos = paArgs[0]; /* * Ensure the the source address is flat GC. */ switch (pDbgc->SourcePos.enmType) { case DBGCVAR_TYPE_GC_FLAT: break; case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_PHYS: case DBGCVAR_TYPE_HC_FAR: { int rc = pCmdHlp->pfnEval(pCmdHlp, &pDbgc->SourcePos, "%%(%Dv)", &pDbgc->SourcePos); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Invalid address or address type. (rc=%d)\n", rc); break; } default: AssertFailed(); break; } /* * Range. */ switch (pDbgc->SourcePos.enmRangeType) { case DBGCVAR_RANGE_NONE: pDbgc->SourcePos.enmRangeType = DBGCVAR_RANGE_ELEMENTS; pDbgc->SourcePos.u64Range = 10; break; case DBGCVAR_RANGE_ELEMENTS: if (pDbgc->SourcePos.u64Range > 2048) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Too many lines requested. Max is 2048 lines.\n"); break; case DBGCVAR_RANGE_BYTES: if (pDbgc->SourcePos.u64Range > 65536) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: The requested range is too big. Max is 64KB.\n"); break; default: return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "internal error: Unknown range type %d.\n", pDbgc->SourcePos.enmRangeType); } /* * Do the disassembling. */ bool fFirst = 1; DBGFLINE LinePrev = { 0, 0, "" }; int iRangeLeft = (int)pDbgc->SourcePos.u64Range; if (iRangeLeft == 0) /* klugde for 'r'. */ iRangeLeft = -1; for (;;) { /* * Get line info. */ DBGFLINE Line; RTGCINTPTR off; int rc = DBGFR3LineByAddr(pVM, pDbgc->SourcePos.u.GCFlat, &off, &Line); if (VBOX_FAILURE(rc)) return VINF_SUCCESS; unsigned cLines = 0; if (memcmp(&Line, &LinePrev, sizeof(Line))) { /* * Print filenamename */ if (!fFirst && strcmp(Line.szFilename, LinePrev.szFilename)) fFirst = true; if (fFirst) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "[%s @ %d]\n", Line.szFilename, Line.uLineNo); if (VBOX_FAILURE(rc)) return rc; } /* * Try open the file and read the line. */ FILE *phFile = fopen(Line.szFilename, "r"); if (phFile) { /* Skip ahead to the desired line. */ char szLine[4096]; unsigned cBefore = fFirst ? RT_MIN(2, Line.uLineNo - 1) : Line.uLineNo - LinePrev.uLineNo - 1; if (cBefore > 7) cBefore = 0; unsigned cLeft = Line.uLineNo - cBefore; while (cLeft > 0) { szLine[0] = '\0'; if (!fgets(szLine, sizeof(szLine), phFile)) break; cLeft--; } if (!cLeft) { /* print the before lines */ for (;;) { size_t cch = strlen(szLine); while (cch > 0 && (szLine[cch - 1] == '\r' || szLine[cch - 1] == '\n' || isspace(szLine[cch - 1])) ) szLine[--cch] = '\0'; if (cBefore-- <= 0) break; rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " %4d: %s\n", Line.uLineNo - cBefore - 1, szLine); szLine[0] = '\0'; fgets(szLine, sizeof(szLine), phFile); cLines++; } /* print the actual line */ rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%08llx %4d: %s\n", Line.Address, Line.uLineNo, szLine); } fclose(phFile); if (VBOX_FAILURE(rc)) return rc; fFirst = false; } else return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Warning: couldn't open source file '%s'\n", Line.szFilename); LinePrev = Line; } /* * Advance */ if (iRangeLeft < 0) /* 'r' */ break; if (pDbgc->SourcePos.enmRangeType == DBGCVAR_RANGE_ELEMENTS) iRangeLeft -= cLines; else iRangeLeft -= 1; rc = pCmdHlp->pfnEval(pCmdHlp, &pDbgc->SourcePos, "(%Dv) + %x", &pDbgc->SourcePos, 1); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Expression: (%Dv) + %x\n", &pDbgc->SourcePos, 1); if (iRangeLeft <= 0) break; } NOREF(pCmd); NOREF(pResult); return 0; } /** * The 'r' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdReg(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); if (pDbgc->fRegCtxGuest) return dbgcCmdRegGuest(pCmd, pCmdHlp, pVM, paArgs, cArgs, pResult); else return dbgcCmdRegHyper(pCmd, pCmdHlp, pVM, paArgs, cArgs, pResult); } /** * Common worker for the dbgcCmdReg*() commands. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. * @param pszPrefix The symbol prefix. */ static DECLCALLBACK(int) dbgcCmdRegCommon(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult, const char *pszPrefix) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * cArgs == 0: Show all */ if (cArgs == 0) { /* * Get register context. */ int rc; PCPUMCTX pCtx; PCCPUMCTXCORE pCtxCore; if (!*pszPrefix) { rc = CPUMQueryGuestCtxPtr(pVM, &pCtx); pCtxCore = CPUMGetGuestCtxCore(pVM); } else { rc = CPUMQueryHyperCtxPtr(pVM, &pCtx); pCtxCore = CPUMGetHyperCtxCore(pVM); } if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Getting register context\n"); /* * Format the flags. */ static struct { const char *pszSet; const char *pszClear; uint32_t fFlag; } aFlags[] = { { "vip",NULL, X86_EFL_VIP }, { "vif",NULL, X86_EFL_VIF }, { "ac", NULL, X86_EFL_AC }, { "vm", NULL, X86_EFL_VM }, { "rf", NULL, X86_EFL_RF }, { "nt", NULL, X86_EFL_NT }, { "ov", "nv", X86_EFL_OF }, { "dn", "up", X86_EFL_DF }, { "ei", "di", X86_EFL_IF }, { "tf", NULL, X86_EFL_TF }, { "nt", "pl", X86_EFL_SF }, { "nz", "zr", X86_EFL_ZF }, { "ac", "na", X86_EFL_AF }, { "po", "pe", X86_EFL_PF }, { "cy", "nc", X86_EFL_CF }, }; char szEFlags[80]; char *psz = szEFlags; uint32_t efl = pCtxCore->eflags.u32; for (unsigned i = 0; i < ELEMENTS(aFlags); i++) { const char *pszAdd = aFlags[i].fFlag & efl ? aFlags[i].pszSet : aFlags[i].pszClear; if (pszAdd) { strcpy(psz, pszAdd); psz += strlen(pszAdd); *psz++ = ' '; } } psz[-1] = '\0'; /* * Format the registers. */ if (pDbgc->fRegTerse) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%seax=%08x %sebx=%08x %secx=%08x %sedx=%08x %sesi=%08x %sedi=%08x\n" "%seip=%08x %sesp=%08x %sebp=%08x %siopl=%d %*s\n" "%scs=%04x %sds=%04x %ses=%04x %sfs=%04x %sgs=%04x %sss=%04x %seflags=%08x\n", pszPrefix, pCtxCore->eax, pszPrefix, pCtxCore->ebx, pszPrefix, pCtxCore->ecx, pszPrefix, pCtxCore->edx, pszPrefix, pCtxCore->esi, pszPrefix, pCtxCore->edi, pszPrefix, pCtxCore->eip, pszPrefix, pCtxCore->esp, pszPrefix, pCtxCore->ebp, pszPrefix, X86_EFL_GET_IOPL(efl), *pszPrefix ? 34 : 31, szEFlags, pszPrefix, (RTSEL)pCtxCore->cs, pszPrefix, (RTSEL)pCtxCore->ds, pszPrefix, (RTSEL)pCtxCore->es, pszPrefix, (RTSEL)pCtxCore->fs, pszPrefix, (RTSEL)pCtxCore->gs, pszPrefix, (RTSEL)pCtxCore->ss, pszPrefix, efl); } else { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%seax=%08x %sebx=%08x %secx=%08x %sedx=%08x %sesi=%08x %sedi=%08x\n" "%seip=%08x %sesp=%08x %sebp=%08x %siopl=%d %*s\n" "%scs={%04x base=%08x limit=%08x flags=%08x} %sdr0=%08x %sdr1=%08x\n" "%sds={%04x base=%08x limit=%08x flags=%08x} %sdr2=%08x %sdr3=%08x\n" "%ses={%04x base=%08x limit=%08x flags=%08x} %sdr4=%08x %sdr5=%08x\n" "%sfs={%04x base=%08x limit=%08x flags=%08x} %sdr6=%08x %sdr7=%08x\n" "%sgs={%04x base=%08x limit=%08x flags=%08x} %scr0=%08x %scr2=%08x\n" "%sss={%04x base=%08x limit=%08x flags=%08x} %scr3=%08x %scr4=%08x\n" "%sgdtr=%08x:%04x %sidtr=%08x:%04x %seflags=%08x\n" "%sldtr={%04x base=%08x limit=%08x flags=%08x}\n" "%str ={%04x base=%08x limit=%08x flags=%08x}\n" "%sSysEnter={cs=%04llx eip=%08llx esp=%08llx}\n" "%sFCW=%04x %sFSW=%04x %sFTW=%04x\n" , pszPrefix, pCtxCore->eax, pszPrefix, pCtxCore->ebx, pszPrefix, pCtxCore->ecx, pszPrefix, pCtxCore->edx, pszPrefix, pCtxCore->esi, pszPrefix, pCtxCore->edi, pszPrefix, pCtxCore->eip, pszPrefix, pCtxCore->esp, pszPrefix, pCtxCore->ebp, pszPrefix, X86_EFL_GET_IOPL(efl), *pszPrefix ? 33 : 31, szEFlags, pszPrefix, (RTSEL)pCtxCore->cs, pCtx->csHid.u32Base, pCtx->csHid.u32Limit, pCtx->csHid.Attr.u, pszPrefix, pCtx->dr0, pszPrefix, pCtx->dr1, pszPrefix, (RTSEL)pCtxCore->ds, pCtx->dsHid.u32Base, pCtx->dsHid.u32Limit, pCtx->dsHid.Attr.u, pszPrefix, pCtx->dr2, pszPrefix, pCtx->dr3, pszPrefix, (RTSEL)pCtxCore->es, pCtx->esHid.u32Base, pCtx->esHid.u32Limit, pCtx->esHid.Attr.u, pszPrefix, pCtx->dr4, pszPrefix, pCtx->dr5, pszPrefix, (RTSEL)pCtxCore->fs, pCtx->fsHid.u32Base, pCtx->fsHid.u32Limit, pCtx->fsHid.Attr.u, pszPrefix, pCtx->dr6, pszPrefix, pCtx->dr7, pszPrefix, (RTSEL)pCtxCore->gs, pCtx->gsHid.u32Base, pCtx->gsHid.u32Limit, pCtx->gsHid.Attr.u, pszPrefix, pCtx->cr0, pszPrefix, pCtx->cr2, pszPrefix, (RTSEL)pCtxCore->ss, pCtx->ssHid.u32Base, pCtx->ssHid.u32Limit, pCtx->ssHid.Attr.u, pszPrefix, pCtx->cr3, pszPrefix, pCtx->cr4, pszPrefix, pCtx->gdtr.pGdt,pCtx->gdtr.cbGdt, pszPrefix, pCtx->idtr.pIdt, pCtx->idtr.cbIdt, pszPrefix, pCtxCore->eflags, pszPrefix, (RTSEL)pCtx->ldtr, pCtx->ldtrHid.u32Base, pCtx->ldtrHid.u32Limit, pCtx->ldtrHid.Attr.u, pszPrefix, (RTSEL)pCtx->tr, pCtx->trHid.u32Base, pCtx->trHid.u32Limit, pCtx->trHid.Attr.u, pszPrefix, pCtx->SysEnter.cs, pCtx->SysEnter.eip, pCtx->SysEnter.esp, pszPrefix, pCtx->fpu.FCW, pszPrefix, pCtx->fpu.FSW, pszPrefix, pCtx->fpu.FTW); } /* * Disassemble one instruction at cs:eip. */ return pCmdHlp->pfnExec(pCmdHlp, "u %04x:%08x L 0", pCtx->cs, pCtx->eip); } /* * cArgs == 1: Show the register. * cArgs == 2: Modify the register. */ if ( cArgs == 1 || cArgs == 2) { /* locate the register symbol. */ const char *pszReg = paArgs[0].u.pszString; if ( *pszPrefix && pszReg[0] != *pszPrefix) { /* prepend the prefix. */ char *psz = (char *)alloca(strlen(pszReg) + 2); psz[0] = *pszPrefix; strcpy(psz + 1, paArgs[0].u.pszString); pszReg = psz; } PCDBGCSYM pSym = dbgcLookupRegisterSymbol(pDbgc, pszReg); if (!pSym) return pCmdHlp->pfnVBoxError(pCmdHlp, VERR_INVALID_PARAMETER /* VERR_DBGC_INVALID_REGISTER */, "Invalid register name '%s'.\n", pszReg); /* show the register */ if (cArgs == 1) { DBGCVAR Var; memset(&Var, 0, sizeof(Var)); int rc = pSym->pfnGet(pSym, pCmdHlp, DBGCVAR_TYPE_NUMBER, &Var); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Failed getting value for register '%s'.\n", pszReg); return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%s=%Dv\n", pszReg, &Var); } /* change the register */ int rc = pSym->pfnSet(pSym, pCmdHlp, &paArgs[1]); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Failed setting value for register '%s'.\n", pszReg); return VINF_SUCCESS; } NOREF(pCmd); NOREF(paArgs); NOREF(pResult); return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Huh? cArgs=%d Expected 0, 1 or 2!\n", cArgs); } /** * The 'rg' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdRegGuest(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { return dbgcCmdRegCommon(pCmd, pCmdHlp, pVM, paArgs, cArgs, pResult, ""); } /** * The 'rh' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdRegHyper(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { return dbgcCmdRegCommon(pCmd, pCmdHlp, pVM, paArgs, cArgs, pResult, "."); } /** * The 'rt' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdRegTerse(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { NOREF(pCmd); NOREF(pVM); NOREF(paArgs); NOREF(cArgs); NOREF(pResult); PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); pDbgc->fRegTerse = !pDbgc->fRegTerse; return pCmdHlp->pfnPrintf(pCmdHlp, NULL, pDbgc->fRegTerse ? "info: Terse register info.\n" : "info: Verbose register info.\n"); } /** * The 't' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdTrace(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); int rc = DBGFR3Step(pVM); if (VBOX_SUCCESS(rc)) pDbgc->fReady = false; else rc = pDbgc->CmdHlp.pfnVBoxError(&pDbgc->CmdHlp, rc, "When trying to single step VM %p\n", pDbgc->pVM); NOREF(pCmd); NOREF(paArgs); NOREF(cArgs); NOREF(pResult); return rc; } /** * The 'k', 'kg' and 'kh' commands. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdStack(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Figure which context we're called for. */ bool fGuest = pCmd->pszCmd[1] == 'g' || (!pCmd->pszCmd[1] && pDbgc->fRegCtxGuest); DBGFSTACKFRAME Frame; memset(&Frame, 0, sizeof(Frame)); int rc; if (fGuest) rc = DBGFR3StackWalkBeginGuest(pVM, &Frame); else rc = DBGFR3StackWalkBeginHyper(pVM, &Frame); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Failed to begin stack walk, rc=%Vrc\n", rc); /* * Print header. * 12345678 12345678 0023:87654321 12345678 87654321 12345678 87654321 symbol */ rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "EBP Ret EBP Ret CS:EIP Arg0 Arg1 Arg2 Arg3 CS:EIP / Symbol [line]\n"); if (VBOX_FAILURE(rc)) return rc; do { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%08RX32 %08RX32 %04RX32:%08RX32 %08RX32 %08RX32 %08RX32 %08RX32", (uint32_t)Frame.AddrFrame.off, (uint32_t)Frame.AddrReturnFrame.off, (uint32_t)Frame.AddrReturnPC.Sel, (uint32_t)Frame.AddrReturnPC.off, Frame.Args.au32[0], Frame.Args.au32[1], Frame.Args.au32[2], Frame.Args.au32[3]); if (VBOX_FAILURE(rc)) return rc; if (!Frame.pSymPC) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " %RTsel:%08RGv", Frame.AddrPC.Sel, Frame.AddrPC.off); else { RTGCINTPTR offDisp = Frame.AddrPC.FlatPtr - Frame.pSymPC->Value; /** @todo this isn't 100% correct for segemnted stuff. */ if (offDisp > 0) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " %s+%llx", Frame.pSymPC->szName, (int64_t)offDisp); else if (offDisp < 0) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " %s-%llx", Frame.pSymPC->szName, -(int64_t)offDisp); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " %s", Frame.pSymPC->szName); } if (VBOX_SUCCESS(rc) && Frame.pLinePC) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " [%s @ 0i%d]", Frame.pLinePC->szFilename, Frame.pLinePC->uLineNo); if (VBOX_SUCCESS(rc)) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "\n"); if (VBOX_FAILURE(rc)) return rc; /* next */ rc = DBGFR3StackWalkNext(pVM, &Frame); } while (VBOX_SUCCESS(rc)); NOREF(paArgs); NOREF(cArgs); NOREF(pResult); return VINF_SUCCESS; } static int dbgcCmdDumpDTWorker64(PDBGCCMDHLP /*pCmdHlp*/, PCX86DESC64 /*pDesc*/, unsigned /*iEntry*/, bool /* fHyper */, bool * /*fDblEntry*/) { /* GUEST64 */ return VINF_SUCCESS; } /** * Wroker function that displays one descriptor entry (GDT, LDT, IDT). * * @returns pfnPrintf status code. * @param pCmdHlp The DBGC command helpers. * @param pDesc The descriptor to display. * @param iEntry The descriptor entry number. * @param fHyper Whether the selector belongs to the hypervisor or not. */ static int dbgcCmdDumpDTWorker32(PDBGCCMDHLP pCmdHlp, PCX86DESC pDesc, unsigned iEntry, bool fHyper) { int rc; const char *pszHyper = fHyper ? " HYPER" : ""; const char *pszPresent = pDesc->Gen.u1Present ? "P " : "NP"; if (pDesc->Gen.u1DescType) { static const char * const s_apszTypes[] = { "DataRO", /* 0 Read-Only */ "DataRO", /* 1 Read-Only - Accessed */ "DataRW", /* 2 Read/Write */ "DataRW", /* 3 Read/Write - Accessed */ "DownRO", /* 4 Expand-down, Read-Only */ "DownRO", /* 5 Expand-down, Read-Only - Accessed */ "DownRW", /* 6 Expand-down, Read/Write */ "DownRO", /* 7 Expand-down, Read/Write - Accessed */ "CodeEO", /* 8 Execute-Only */ "CodeEO", /* 9 Execute-Only - Accessed */ "CodeER", /* A Execute/Readable */ "CodeER", /* B Execute/Readable - Accessed */ "ConfE0", /* C Conforming, Execute-Only */ "ConfE0", /* D Conforming, Execute-Only - Accessed */ "ConfER", /* E Conforming, Execute/Readable */ "ConfER" /* F Conforming, Execute/Readable - Accessed */ }; const char *pszAccessed = pDesc->Gen.u4Type & BIT(0) ? "A " : "NA"; const char *pszGranularity = pDesc->Gen.u1Granularity ? "G" : " "; const char *pszBig = pDesc->Gen.u1DefBig ? "BIG" : " "; uint32_t u32Base = pDesc->Gen.u16BaseLow | ((uint32_t)pDesc->Gen.u8BaseHigh1 << 16) | ((uint32_t)pDesc->Gen.u8BaseHigh2 << 24); uint32_t cbLimit = pDesc->Gen.u16LimitLow | (pDesc->Gen.u4LimitHigh << 16); if (pDesc->Gen.u1Granularity) cbLimit <<= PAGE_SHIFT; rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x %s Bas=%08x Lim=%08x DPL=%d %s %s %s %s AVL=%d R=%d%s\n", iEntry, s_apszTypes[pDesc->Gen.u4Type], u32Base, cbLimit, pDesc->Gen.u2Dpl, pszPresent, pszAccessed, pszGranularity, pszBig, pDesc->Gen.u1Available, pDesc->Gen.u1Reserved, pszHyper); } else { static const char * const s_apszTypes[] = { "Ill-0 ", /* 0 0000 Reserved (Illegal) */ "Tss16A", /* 1 0001 Available 16-bit TSS */ "LDT ", /* 2 0010 LDT */ "Tss16B", /* 3 0011 Busy 16-bit TSS */ "Call16", /* 4 0100 16-bit Call Gate */ "TaskG ", /* 5 0101 Task Gate */ "Int16 ", /* 6 0110 16-bit Interrupt Gate */ "Trap16", /* 7 0111 16-bit Trap Gate */ "Ill-8 ", /* 8 1000 Reserved (Illegal) */ "Tss32A", /* 9 1001 Available 32-bit TSS */ "Ill-A ", /* A 1010 Reserved (Illegal) */ "Tss32B", /* B 1011 Busy 32-bit TSS */ "Call32", /* C 1100 32-bit Call Gate */ "Ill-D ", /* D 1101 Reserved (Illegal) */ "Int32 ", /* E 1110 32-bit Interrupt Gate */ "Trap32" /* F 1111 32-bit Trap Gate */ }; switch (pDesc->Gen.u4Type) { /* raw */ case X86_SEL_TYPE_SYS_UNDEFINED: case X86_SEL_TYPE_SYS_UNDEFINED2: case X86_SEL_TYPE_SYS_UNDEFINED4: case X86_SEL_TYPE_SYS_UNDEFINED3: rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x %s %.8Rhxs DPL=%d %s%s\n", iEntry, s_apszTypes[pDesc->Gen.u4Type], pDesc, pDesc->Gen.u2Dpl, pszPresent, pszHyper); break; case X86_SEL_TYPE_SYS_286_TSS_AVAIL: case X86_SEL_TYPE_SYS_386_TSS_AVAIL: case X86_SEL_TYPE_SYS_286_TSS_BUSY: case X86_SEL_TYPE_SYS_386_TSS_BUSY: case X86_SEL_TYPE_SYS_LDT: { const char *pszGranularity = pDesc->Gen.u1Granularity ? "G" : " "; const char *pszBusy = pDesc->Gen.u4Type & BIT(1) ? "B " : "NB"; const char *pszBig = pDesc->Gen.u1DefBig ? "BIG" : " "; uint32_t u32Base = pDesc->Gen.u16BaseLow | ((uint32_t)pDesc->Gen.u8BaseHigh1 << 16) | ((uint32_t)pDesc->Gen.u8BaseHigh2 << 24); uint32_t cbLimit = pDesc->Gen.u16LimitLow | (pDesc->Gen.u4LimitHigh << 16); if (pDesc->Gen.u1Granularity) cbLimit <<= PAGE_SHIFT; rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x %s Bas=%08x Lim=%08x DPL=%d %s %s %s %s AVL=%d R=%d%s\n", iEntry, s_apszTypes[pDesc->Gen.u4Type], u32Base, cbLimit, pDesc->Gen.u2Dpl, pszPresent, pszBusy, pszGranularity, pszBig, pDesc->Gen.u1Available, pDesc->Gen.u1Reserved | (pDesc->Gen.u1DefBig << 1), pszHyper); break; } case X86_SEL_TYPE_SYS_TASK_GATE: { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x %s TSS=%04x DPL=%d %s%s\n", iEntry, s_apszTypes[pDesc->Gen.u4Type], pDesc->au16[1], pDesc->Gen.u2Dpl, pszPresent, pszHyper); break; } case X86_SEL_TYPE_SYS_286_CALL_GATE: case X86_SEL_TYPE_SYS_386_CALL_GATE: { unsigned cParams = pDesc->au8[0] & 0x1f; const char *pszCountOf = pDesc->Gen.u4Type & BIT(3) ? "DC" : "WC"; RTSEL sel = pDesc->au16[1]; uint32_t off = pDesc->au16[0] | ((uint32_t)pDesc->au16[3] << 16); rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x %s Sel:Off=%04x:%08x DPL=%d %s %s=%d%s\n", iEntry, s_apszTypes[pDesc->Gen.u4Type], sel, off, pDesc->Gen.u2Dpl, pszPresent, pszCountOf, cParams, pszHyper); break; } case X86_SEL_TYPE_SYS_286_INT_GATE: case X86_SEL_TYPE_SYS_386_INT_GATE: case X86_SEL_TYPE_SYS_286_TRAP_GATE: case X86_SEL_TYPE_SYS_386_TRAP_GATE: { RTSEL sel = pDesc->au16[1]; uint32_t off = pDesc->au16[0] | ((uint32_t)pDesc->au16[3] << 16); rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x %s Sel:Off=%04x:%08x DPL=%d %s%s\n", iEntry, s_apszTypes[pDesc->Gen.u4Type], sel, off, pDesc->Gen.u2Dpl, pszPresent, pszHyper); break; } /* impossible, just it's necessary to keep gcc happy. */ default: return VINF_SUCCESS; } } return rc; } /** * The 'dg', 'dga', 'dl' and 'dla' commands. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdDumpDT(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { /* * Validate input. */ if (!pVM) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: No VM.\n"); /* * Get the CPU mode, check which command variation this is * and fix a default parameter if needed. */ CPUMMODE enmMode = CPUMGetGuestMode(pVM); bool fGdt = pCmd->pszCmd[1] == 'g'; bool fAll = pCmd->pszCmd[2] == 'a'; DBGCVAR Var; if (!cArgs) { cArgs = 1; paArgs = &Var; Var.enmType = DBGCVAR_TYPE_NUMBER; Var.u.u64Number = fGdt ? 0 : 4; Var.enmRangeType = DBGCVAR_RANGE_ELEMENTS; Var.u64Range = 1024; } /* * Process the arguments. */ for (unsigned i = 0; i < cArgs; i++) { /* * Retrive the selector value from the argument. * The parser may confuse pointers and numbers if more than one * argument is given, that that into account. */ /* check that what've got makes sense as we don't trust the parser yet. */ if ( paArgs[i].enmType != DBGCVAR_TYPE_NUMBER && !DBGCVAR_ISPOINTER(paArgs[i].enmType)) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: arg #%u isn't of number or pointer type but %d.\n", i, paArgs[i].enmType); unsigned u64; unsigned cSels = 1; switch (paArgs[i].enmType) { case DBGCVAR_TYPE_NUMBER: u64 = paArgs[i].u.u64Number; if (paArgs[i].enmRangeType != DBGCVAR_RANGE_NONE) cSels = RT_MIN(paArgs[i].u64Range, 1024); break; case DBGCVAR_TYPE_GC_FAR: u64 = paArgs[i].u.GCFar.sel; break; case DBGCVAR_TYPE_GC_FLAT: u64 = paArgs[i].u.GCFlat; break; case DBGCVAR_TYPE_GC_PHYS: u64 = paArgs[i].u.GCPhys; break; case DBGCVAR_TYPE_HC_FAR: u64 = paArgs[i].u.HCFar.sel; break; case DBGCVAR_TYPE_HC_FLAT: u64 = (uintptr_t)paArgs[i].u.pvHCFlat; break; case DBGCVAR_TYPE_HC_PHYS: u64 = paArgs[i].u.HCPhys; break; default: u64 = _64K; break; } if (u64 < _64K) { unsigned Sel = (RTSEL)u64; /* * Dump the specified range. */ bool fSingle = cSels == 1; while ( cSels-- > 0 && Sel < _64K) { SELMSELINFO SelInfo; int rc = SELMR3GetSelectorInfo(pVM, Sel, &SelInfo); if (RT_SUCCESS(rc)) { if (SelInfo.fRealMode) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x RealM Bas=%04x Lim=%04x\n", Sel, (unsigned)SelInfo.GCPtrBase, (unsigned)SelInfo.cbLimit); else if (fAll || fSingle || SelInfo.Raw.Gen.u1Present) { if (enmMode == CPUMMODE_PROTECTED) rc = dbgcCmdDumpDTWorker32(pCmdHlp, (PX86DESC)&SelInfo.Raw, Sel, SelInfo.fHyper); else { bool fDblSkip = false; rc = dbgcCmdDumpDTWorker64(pCmdHlp, (PX86DESC64)&SelInfo.Raw, Sel, SelInfo.fHyper, &fDblSkip); if (fDblSkip) Sel += 4; } } } else { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x %Vrc\n", Sel, rc); if (!fAll) return rc; } if (RT_FAILURE(rc)) return rc; /* next */ Sel += 4; } } else pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: %llx is out of bounds\n", u64); } NOREF(pResult); return VINF_SUCCESS; } /** * The 'di' and 'dia' commands. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdDumpIDT(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { /* * Validate input. */ if (!pVM) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: No VM.\n"); /* * Establish some stuff like the current IDTR and CPU mode, * and fix a default parameter. */ uint16_t cbLimit; RTGCUINTPTR GCPtrBase = CPUMGetGuestIDTR(pVM, &cbLimit); CPUMMODE enmMode = CPUMGetGuestMode(pVM); size_t cbEntry; switch (enmMode) { case CPUMMODE_REAL: cbEntry = sizeof(RTFAR16); break; case CPUMMODE_PROTECTED: cbEntry = sizeof(X86DESC); break; case CPUMMODE_LONG: cbEntry = sizeof(X86DESC64); break; default: return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Invalid CPU mode %d.\n", enmMode); } bool fAll = pCmd->pszCmd[2] == 'a'; DBGCVAR Var; if (!cArgs) { cArgs = 1; paArgs = &Var; Var.enmType = DBGCVAR_TYPE_NUMBER; Var.u.u64Number = 0; Var.enmRangeType = DBGCVAR_RANGE_ELEMENTS; Var.u64Range = 256; } /* * Process the arguments. */ for (unsigned i = 0; i < cArgs; i++) { /* check that what've got makes sense as we don't trust the parser yet. */ if (paArgs[i].enmType != DBGCVAR_TYPE_NUMBER) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: arg #%u isn't of number type but %d.\n", i, paArgs[i].enmType); if (paArgs[i].u.u64Number < 256) { RTGCUINTPTR iInt = paArgs[i].u.u64Number; unsigned cInts = paArgs[i].enmRangeType != DBGCVAR_RANGE_NONE ? paArgs[i].u64Range : 1; bool fSingle = cInts == 1; while ( cInts-- > 0 && iInt < 256) { /* * Try read it. */ union { RTFAR16 Real; X86DESC Prot; X86DESC64 Long; } u; if (iInt * cbEntry + (cbEntry - 1) > cbLimit) { pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x not within the IDT\n", (unsigned)iInt); if (!fAll && !fSingle) return VINF_SUCCESS; } DBGCVAR AddrVar; AddrVar.enmType = DBGCVAR_TYPE_GC_FLAT; AddrVar.u.GCFlat = GCPtrBase + iInt * cbEntry; AddrVar.enmRangeType = DBGCVAR_RANGE_NONE; int rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &u, cbEntry, &AddrVar, NULL); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Reading IDT entry %#04x.\n", (unsigned)iInt); /* * Display it. */ switch (enmMode) { case CPUMMODE_REAL: rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%04x %RTfp16\n", (unsigned)iInt, u.Real); /** @todo resolve 16:16 IDTE to a symbol */ break; case CPUMMODE_PROTECTED: if (fAll || fSingle || u.Prot.Gen.u1Present) rc = dbgcCmdDumpDTWorker32(pCmdHlp, &u.Prot, iInt, false); break; case CPUMMODE_LONG: if (fAll || fSingle || u.Long.Gen.u1Present) rc = dbgcCmdDumpDTWorker64(pCmdHlp, &u.Long, iInt, false, NULL); break; default: break; /* to shut up gcc */ } if (RT_FAILURE(rc)) return rc; /* next */ iInt++; } } else pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: %llx is out of bounds (max 256)\n", paArgs[i].u.u64Number); } NOREF(pResult); return VINF_SUCCESS; } /** * The 'da', 'dq', 'dd', 'dw' and 'db' commands. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdDumpMem(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Validate input. */ if ( cArgs > 1 || (cArgs == 1 && !DBGCVAR_ISPOINTER(paArgs[0].enmType))) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "internal error: The parser doesn't do its job properly yet.. It might help to use the '%%' operator.\n"); if (!pVM) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: No VM.\n"); /* * Figure out the element size. */ size_t cbElement; bool fAscii = false; switch (pCmd->pszCmd[1]) { default: case 'b': cbElement = 1; break; case 'w': cbElement = 2; break; case 'd': cbElement = 4; break; case 'q': cbElement = 8; break; case 'a': cbElement = 1; fAscii = true; break; case '\0': fAscii = !!(pDbgc->cbDumpElement & 0x80000000); cbElement = pDbgc->cbDumpElement & 0x7fffffff; if (!cbElement) cbElement = 1; break; } /* * Find address. */ if (!cArgs) pDbgc->DumpPos.enmRangeType = DBGCVAR_RANGE_NONE; else pDbgc->DumpPos = paArgs[0]; /* * Range. */ switch (pDbgc->DumpPos.enmRangeType) { case DBGCVAR_RANGE_NONE: pDbgc->DumpPos.enmRangeType = DBGCVAR_RANGE_BYTES; pDbgc->DumpPos.u64Range = 0x60; break; case DBGCVAR_RANGE_ELEMENTS: if (pDbgc->DumpPos.u64Range > 2048) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: Too many elements requested. Max is 2048 elements.\n"); pDbgc->DumpPos.enmRangeType = DBGCVAR_RANGE_BYTES; pDbgc->DumpPos.u64Range = (cbElement ? cbElement : 1) * pDbgc->DumpPos.u64Range; break; case DBGCVAR_RANGE_BYTES: if (pDbgc->DumpPos.u64Range > 65536) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: The requested range is too big. Max is 64KB.\n"); break; default: return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "internal error: Unknown range type %d.\n", pDbgc->DumpPos.enmRangeType); } /* * Do the dumping. */ pDbgc->cbDumpElement = cbElement | (fAscii << 31); int cbLeft = (int)pDbgc->DumpPos.u64Range; uint8_t u8Prev = '\0'; for (;;) { /* * Read memory. */ char achBuffer[16]; size_t cbReq = RT_MIN((int)sizeof(achBuffer), cbLeft); size_t cb = RT_MIN((int)sizeof(achBuffer), cbLeft); int rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &achBuffer, cbReq, &pDbgc->DumpPos, &cb); if (VBOX_FAILURE(rc)) { if (u8Prev && u8Prev != '\n') pCmdHlp->pfnPrintf(pCmdHlp, NULL, "\n"); return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Reading memory at %DV.\n", &pDbgc->DumpPos); } /* * Display it. */ memset(&achBuffer[cb], 0, sizeof(achBuffer) - cb); if (!fAscii) { pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%DV:", &pDbgc->DumpPos); unsigned i; for (i = 0; i < cb; i += cbElement) { const char *pszSpace = " "; if (cbElement <= 2 && i == 8 && !fAscii) pszSpace = "-"; switch (cbElement) { case 1: pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%s%02x", pszSpace, *(uint8_t *)&achBuffer[i]); break; case 2: pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%s%04x", pszSpace, *(uint16_t *)&achBuffer[i]); break; case 4: pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%s%08x", pszSpace, *(uint32_t *)&achBuffer[i]); break; case 8: pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%s%016llx", pszSpace, *(uint64_t *)&achBuffer[i]); break; } } /* chars column */ if (pDbgc->cbDumpElement == 1) { while (i++ < sizeof(achBuffer)) pCmdHlp->pfnPrintf(pCmdHlp, NULL, " "); pCmdHlp->pfnPrintf(pCmdHlp, NULL, " "); for (i = 0; i < cb; i += cbElement) { uint8_t u8 = *(uint8_t *)&achBuffer[i]; if (isprint(u8) && u8 < 127) pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%c", u8); else pCmdHlp->pfnPrintf(pCmdHlp, NULL, "."); } } rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "\n"); } else { /* * We print up to the first zero and stop there. * Only printables + '\t' and '\n' are printed. */ if (!u8Prev) pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%DV:\n", &pDbgc->DumpPos); uint8_t u8 = '\0'; unsigned i; for (i = 0; i < cb; i++) { u8Prev = u8; u8 = *(uint8_t *)&achBuffer[i]; if ( u8 < 127 && ( isprint(u8) || u8 == '\t' || u8 == '\n')) pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%c", u8); else if (!u8) break; else pCmdHlp->pfnPrintf(pCmdHlp, NULL, "\\x%x", u8); } if (u8 == '\0') cbLeft = cb = i + 1; if (cbLeft - cb <= 0 && u8Prev != '\n') pCmdHlp->pfnPrintf(pCmdHlp, NULL, "\n"); } /* * Advance */ cbLeft -= cb; rc = pCmdHlp->pfnEval(pCmdHlp, &pDbgc->DumpPos, "(%Dv) + %x", &pDbgc->DumpPos, cb); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Expression: (%Dv) + %x\n", &pDbgc->DumpPos, cb); if (cbLeft <= 0) break; } NOREF(pCmd); NOREF(pResult); return VINF_SUCCESS; } /** * Best guess at which paging mode currently applies to the guest * paging structures. * * This have to come up with a decent answer even when the guest * is in non-paged protected mode or real mode. * * @returns cr3. * @param pDbgc The DBGC instance. * @param pfPAE Where to store the page address extension indicator. * @param pfLME Where to store the long mode enabled indicator. * @param pfPSE Where to store the page size extension indicator. * @param pfPGE Where to store the page global enabled indicator. * @param pfNXE Where to store the no-execution enabled inidicator. */ static RTGCPHYS dbgcGetGuestPageMode(PDBGC pDbgc, bool *pfPAE, bool *pfLME, bool *pfPSE, bool *pfPGE, bool *pfNXE) { RTGCUINTREG cr4 = CPUMGetGuestCR4(pDbgc->pVM); *pfPSE = !!(cr4 & X86_CR4_PSE); *pfPGE = !!(cr4 & X86_CR4_PGE); *pfPAE = !!(cr4 & X86_CR4_PAE); *pfLME = CPUMGetGuestMode(pDbgc->pVM) == CPUMMODE_LONG; *pfNXE = false; /* GUEST64 GUESTNX */ return CPUMGetGuestCR3(pDbgc->pVM); } /** * Determin the shadow paging mode. * * @returns cr3. * @param pDbgc The DBGC instance. * @param pfPAE Where to store the page address extension indicator. * @param pfLME Where to store the long mode enabled indicator. * @param pfPSE Where to store the page size extension indicator. * @param pfPGE Where to store the page global enabled indicator. * @param pfNXE Where to store the no-execution enabled inidicator. */ static RTHCPHYS dbgcGetShadowPageMode(PDBGC pDbgc, bool *pfPAE, bool *pfLME, bool *pfPSE, bool *pfPGE, bool *pfNXE) { *pfPSE = true; *pfPGE = false; switch (PGMGetShadowMode(pDbgc->pVM)) { default: case PGMMODE_32_BIT: *pfPAE = *pfLME = *pfNXE = false; break; case PGMMODE_PAE: *pfLME = *pfNXE = false; *pfPAE = true; break; case PGMMODE_PAE_NX: *pfLME = false; *pfPAE = *pfNXE = true; break; case PGMMODE_AMD64: *pfNXE = false; *pfPAE = *pfLME = true; break; case PGMMODE_AMD64_NX: *pfPAE = *pfLME = *pfNXE = true; break; } return PGMGetHyperCR3(pDbgc->pVM); } /** * The 'dpd', 'dpda', 'dpdb', 'dpdg' and 'dpdh' commands. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdDumpPageDir(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Validate input. */ if ( cArgs > 1 || (cArgs == 1 && pCmd->pszCmd[3] == 'a' && !DBGCVAR_ISPOINTER(paArgs[0].enmType)) || (cArgs == 1 && pCmd->pszCmd[3] != 'a' && !(paArgs[0].enmType == DBGCVAR_TYPE_NUMBER || DBGCVAR_ISPOINTER(paArgs[0].enmType))) ) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "internal error: The parser doesn't do its job properly yet.. It might help to use the '%%' operator.\n"); if (!pVM) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: No VM.\n"); /* * Guest or shadow page directories? Get the paging parameters. */ bool fGuest = pCmd->pszCmd[3] != 'h'; if (!pCmd->pszCmd[3] || pCmd->pszCmd[3] == 'a') fGuest = paArgs[0].enmType == DBGCVAR_TYPE_NUMBER ? pDbgc->fRegCtxGuest : DBGCVAR_ISGCPOINTER(paArgs[0].enmType); bool fPAE, fLME, fPSE, fPGE, fNXE; uint64_t cr3 = fGuest ? dbgcGetGuestPageMode(pDbgc, &fPAE, &fLME, &fPSE, &fPGE, &fNXE) : dbgcGetShadowPageMode(pDbgc, &fPAE, &fLME, &fPSE, &fPGE, &fNXE); const unsigned cbEntry = fPAE ? sizeof(X86PTEPAE) : sizeof(X86PTE); /* * Setup default arugment if none was specified. * Fix address / index confusion. */ DBGCVAR VarDefault; if (!cArgs) { if (pCmd->pszCmd[3] == 'a') { if (fLME || fPAE) return DBGCCmdHlpPrintf(pCmdHlp, "Default argument for 'dpda' hasn't been fully implemented yet. Try with an address or use one of the other commands.\n"); if (fGuest) DBGCVAR_INIT_GC_PHYS(&VarDefault, cr3); else DBGCVAR_INIT_HC_PHYS(&VarDefault, cr3); } else DBGCVAR_INIT_GC_FLAT(&VarDefault, 0); paArgs = &VarDefault; cArgs = 1; } else if (paArgs[0].enmType == DBGCVAR_TYPE_NUMBER) { Assert(pCmd->pszCmd[3] != 'a'); VarDefault = paArgs[0]; if (VarDefault.u.u64Number <= 1024) { if (fPAE) return DBGCCmdHlpPrintf(pCmdHlp, "PDE indexing is only implemented for 32-bit paging.\n"); if (VarDefault.u.u64Number >= PAGE_SIZE / cbEntry) return DBGCCmdHlpPrintf(pCmdHlp, "PDE index is out of range [0..%d].\n", PAGE_SIZE / cbEntry - 1); VarDefault.u.u64Number <<= X86_PD_SHIFT; } VarDefault.enmType = DBGCVAR_TYPE_GC_FLAT; paArgs = &VarDefault; } /* * Locate the PDE to start displaying at. * * The 'dpda' command takes the address of a PDE, while the others are guest * virtual address which PDEs should be displayed. So, 'dpda' is rather simple * while the others require us to do all the tedious walking thru the paging * hierarchy to find the intended PDE. */ unsigned iEntry = ~0U; /* The page directory index. ~0U for 'dpta'. */ DBGCVAR VarGCPtr; /* The GC address corresponding to the current PDE (iEntry != ~0U). */ DBGCVAR VarPDEAddr; /* The address of the current PDE. */ unsigned cEntries; /* The number of entries to display. */ unsigned cEntriesMax; /* The max number of entries to display. */ int rc; if (pCmd->pszCmd[3] == 'a') { VarPDEAddr = paArgs[0]; switch (VarPDEAddr.enmRangeType) { case DBGCVAR_RANGE_BYTES: cEntries = VarPDEAddr.u64Range / cbEntry; break; case DBGCVAR_RANGE_ELEMENTS: cEntries = VarPDEAddr.u64Range; break; default: cEntries = 10; break; } cEntriesMax = PAGE_SIZE / cbEntry; } else { /* * Determin the range. */ switch (paArgs[0].enmRangeType) { case DBGCVAR_RANGE_BYTES: cEntries = paArgs[0].u64Range / PAGE_SIZE; break; case DBGCVAR_RANGE_ELEMENTS: cEntries = paArgs[0].u64Range; break; default: cEntries = 10; break; } /* * Normalize the input address, it must be a flat GC address. */ rc = pCmdHlp->pfnEval(pCmdHlp, &VarGCPtr, "%%(%Dv)", &paArgs[0]); if (VBOX_FAILURE(rc)) return DBGCCmdHlpVBoxError(pCmdHlp, rc, "%%(%Dv)", &paArgs[0]); if (VarGCPtr.enmType == DBGCVAR_TYPE_HC_FLAT) { VarGCPtr.u.GCFlat = (uintptr_t)VarGCPtr.u.pvHCFlat; VarGCPtr.enmType = DBGCVAR_TYPE_GC_FLAT; } if (fPAE) VarGCPtr.u.GCFlat &= ~(((RTGCPTR)1 << X86_PD_PAE_SHIFT) - 1); else VarGCPtr.u.GCFlat &= ~(((RTGCPTR)1 << X86_PD_SHIFT) - 1); /* * Do the paging walk until we get to the page directory. */ DBGCVAR VarCur; if (fGuest) DBGCVAR_INIT_GC_PHYS(&VarCur, cr3); else DBGCVAR_INIT_HC_PHYS(&VarCur, cr3); if (fLME) { /* Page Map Level 4 Lookup. */ /* Check if it's a valid address first? */ VarCur.u.u64Number &= X86_PTE_PAE_PG_MASK; VarCur.u.u64Number += (((uint64_t)VarGCPtr.u.GCFlat >> X86_PML4_SHIFT) & X86_PML4_MASK) * sizeof(X86PML4E); X86PML4E Pml4e; rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &Pml4e, sizeof(Pml4e), &VarCur, NULL); if (VBOX_FAILURE(rc)) return DBGCCmdHlpVBoxError(pCmdHlp, rc, "Reading PML4E memory at %DV.\n", &VarCur); if (!Pml4e.n.u1Present) return DBGCCmdHlpPrintf(pCmdHlp, "Page directory pointer table is not present for %Dv.\n", &VarGCPtr); VarCur.u.u64Number = Pml4e.u & X86_PML4E_PG_MASK; Assert(fPAE); } if (fPAE) { /* Page directory pointer table. */ X86PDPE Pdpe; VarCur.u.u64Number += ((VarGCPtr.u.GCFlat >> X86_PDPTR_SHIFT) & X86_PDPTR_MASK) * sizeof(Pdpe); rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &Pdpe, sizeof(Pdpe), &VarCur, NULL); if (VBOX_FAILURE(rc)) return DBGCCmdHlpVBoxError(pCmdHlp, rc, "Reading PDPE memory at %DV.\n", &VarCur); if (!Pdpe.n.u1Present) return DBGCCmdHlpPrintf(pCmdHlp, "Page directory is not present for %Dv.\n", &VarGCPtr); iEntry = (VarGCPtr.u.GCFlat >> X86_PD_PAE_SHIFT) & X86_PD_PAE_MASK; VarPDEAddr = VarCur; VarPDEAddr.u.u64Number = Pdpe.u & X86_PDPE_PG_MASK; VarPDEAddr.u.u64Number += iEntry * sizeof(X86PDEPAE); } else { /* 32-bit legacy - CR3 == page directory. */ iEntry = (VarGCPtr.u.GCFlat >> X86_PD_SHIFT) & X86_PD_MASK; VarPDEAddr = VarCur; VarPDEAddr.u.u64Number += iEntry * sizeof(X86PDE); } cEntriesMax = (PAGE_SIZE - iEntry) / cbEntry; iEntry /= cbEntry; } /* adjust cEntries */ cEntries = RT_MAX(1, cEntries); cEntries = RT_MIN(cEntries, cEntriesMax); /* * The display loop. */ DBGCCmdHlpPrintf(pCmdHlp, iEntry != ~0U ? "%DV (index %#x):\n" : "%DV:\n", &VarPDEAddr, iEntry); do { /* * Read. */ X86PDEPAE Pde; Pde.u = 0; rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &Pde, cbEntry, &VarPDEAddr, NULL); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Reading PDE memory at %DV.\n", &VarPDEAddr); /* * Display. */ if (iEntry != ~0U) { DBGCCmdHlpPrintf(pCmdHlp, "%03x %DV: ", iEntry, &VarGCPtr); iEntry++; } if (fPSE && Pde.b.u1Size) DBGCCmdHlpPrintf(pCmdHlp, fPAE ? "%016llx big phys=%016llx %s %s %s %s %s avl=%02x %s %s %s %s %s" : "%08llx big phys=%08llx %s %s %s %s %s avl=%02x %s %s %s %s %s", Pde.u, Pde.u & X86_PDE_PAE_PG_MASK, Pde.b.u1Present ? "p " : "np", Pde.b.u1Write ? "w" : "r", Pde.b.u1User ? "u" : "s", Pde.b.u1Accessed ? "a " : "na", Pde.b.u1Dirty ? "d " : "nd", Pde.b.u3Available, Pde.b.u1Global ? (fPGE ? "g" : "G") : " ", Pde.b.u1WriteThru ? "pwt" : " ", Pde.b.u1CacheDisable ? "pcd" : " ", Pde.b.u1PAT ? "pat" : "", Pde.b.u1NoExecute ? (fNXE ? "nx" : "NX") : " "); else DBGCCmdHlpPrintf(pCmdHlp, fPAE ? "%016llx 4kb phys=%016llx %s %s %s %s %s avl=%02x %s %s %s %s" : "%08llx 4kb phys=%08llx %s %s %s %s %s avl=%02x %s %s %s %s", Pde.u, Pde.u & X86_PDE_PAE_PG_MASK, Pde.n.u1Present ? "p " : "np", Pde.n.u1Write ? "w" : "r", Pde.n.u1User ? "u" : "s", Pde.n.u1Accessed ? "a " : "na", Pde.u & BIT(6) ? "6 " : " ", Pde.n.u3Available, Pde.u & BIT(8) ? "8" : " ", Pde.n.u1WriteThru ? "pwt" : " ", Pde.n.u1CacheDisable ? "pcd" : " ", Pde.u & BIT(7) ? "7" : "", Pde.n.u1NoExecute ? (fNXE ? "nx" : "NX") : " "); if (Pde.u & UINT64_C(0x7fff000000000000)) DBGCCmdHlpPrintf(pCmdHlp, " weird=%RX64", (Pde.u & UINT64_C(0x7fff000000000000))); rc = DBGCCmdHlpPrintf(pCmdHlp, "\n"); if (VBOX_FAILURE(rc)) return rc; /* * Advance. */ VarPDEAddr.u.u64Number += cbEntry; if (iEntry != ~0U) VarGCPtr.u.GCFlat += 1 << (fPAE ? X86_PD_PAE_SHIFT : X86_PD_SHIFT); } while (cEntries-- > 0); NOREF(pResult); return VINF_SUCCESS; } /** * The 'dpdb' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdDumpPageDirBoth(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { if (!pVM) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: No VM.\n"); int rc1 = pCmdHlp->pfnExec(pCmdHlp, "dpdg %DV", &paArgs[0]); int rc2 = pCmdHlp->pfnExec(pCmdHlp, "dpdh %DV", &paArgs[0]); if (VBOX_FAILURE(rc1)) return rc1; NOREF(pCmd); NOREF(paArgs); NOREF(cArgs); NOREF(pResult); return rc2; } /** * The 'dpg*' commands. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdDumpPageTable(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Validate input. */ if ( cArgs != 1 || (pCmd->pszCmd[3] == 'a' && !DBGCVAR_ISPOINTER(paArgs[0].enmType)) || (pCmd->pszCmd[3] != 'a' && !(paArgs[0].enmType == DBGCVAR_TYPE_NUMBER || DBGCVAR_ISPOINTER(paArgs[0].enmType))) ) return DBGCCmdHlpPrintf(pCmdHlp, "internal error: The parser doesn't do its job properly yet.. It might help to use the '%%' operator.\n"); if (!pVM) return DBGCCmdHlpPrintf(pCmdHlp, "error: No VM.\n"); /* * Guest or shadow page tables? Get the paging parameters. */ bool fGuest = pCmd->pszCmd[3] != 'h'; if (!pCmd->pszCmd[3] || pCmd->pszCmd[3] == 'a') fGuest = paArgs[0].enmType == DBGCVAR_TYPE_NUMBER ? pDbgc->fRegCtxGuest : DBGCVAR_ISGCPOINTER(paArgs[0].enmType); bool fPAE, fLME, fPSE, fPGE, fNXE; uint64_t cr3 = fGuest ? dbgcGetGuestPageMode(pDbgc, &fPAE, &fLME, &fPSE, &fPGE, &fNXE) : dbgcGetShadowPageMode(pDbgc, &fPAE, &fLME, &fPSE, &fPGE, &fNXE); const unsigned cbEntry = fPAE ? sizeof(X86PTEPAE) : sizeof(X86PTE); /* * Locate the PTE to start displaying at. * * The 'dpta' command takes the address of a PTE, while the others are guest * virtual address which PTEs should be displayed. So, 'pdta' is rather simple * while the others require us to do all the tedious walking thru the paging * hierarchy to find the intended PTE. */ unsigned iEntry = ~0U; /* The page table index. ~0U for 'dpta'. */ DBGCVAR VarGCPtr; /* The GC address corresponding to the current PTE (iEntry != ~0U). */ DBGCVAR VarPTEAddr; /* The address of the current PTE. */ unsigned cEntries; /* The number of entries to display. */ unsigned cEntriesMax; /* The max number of entries to display. */ int rc; if (pCmd->pszCmd[3] == 'a') { VarPTEAddr = paArgs[0]; switch (VarPTEAddr.enmRangeType) { case DBGCVAR_RANGE_BYTES: cEntries = VarPTEAddr.u64Range / cbEntry; break; case DBGCVAR_RANGE_ELEMENTS: cEntries = VarPTEAddr.u64Range; break; default: cEntries = 10; break; } cEntriesMax = PAGE_SIZE / cbEntry; } else { /* * Determin the range. */ switch (paArgs[0].enmRangeType) { case DBGCVAR_RANGE_BYTES: cEntries = paArgs[0].u64Range / PAGE_SIZE; break; case DBGCVAR_RANGE_ELEMENTS: cEntries = paArgs[0].u64Range; break; default: cEntries = 10; break; } /* * Normalize the input address, it must be a flat GC address. */ rc = pCmdHlp->pfnEval(pCmdHlp, &VarGCPtr, "%%(%Dv)", &paArgs[0]); if (VBOX_FAILURE(rc)) return DBGCCmdHlpVBoxError(pCmdHlp, rc, "%%(%Dv)", &paArgs[0]); if (VarGCPtr.enmType == DBGCVAR_TYPE_HC_FLAT) { VarGCPtr.u.GCFlat = (uintptr_t)VarGCPtr.u.pvHCFlat; VarGCPtr.enmType = DBGCVAR_TYPE_GC_FLAT; } VarGCPtr.u.GCFlat &= ~(RTGCPTR)PAGE_OFFSET_MASK; /* * Do the paging walk until we get to the page table. */ DBGCVAR VarCur; if (fGuest) DBGCVAR_INIT_GC_PHYS(&VarCur, cr3); else DBGCVAR_INIT_HC_PHYS(&VarCur, cr3); if (fLME) { /* Page Map Level 4 Lookup. */ /* Check if it's a valid address first? */ VarCur.u.u64Number &= X86_PTE_PAE_PG_MASK; VarCur.u.u64Number += (((uint64_t)VarGCPtr.u.GCFlat >> X86_PML4_SHIFT) & X86_PML4_MASK) * sizeof(X86PML4E); X86PML4E Pml4e; rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &Pml4e, sizeof(Pml4e), &VarCur, NULL); if (VBOX_FAILURE(rc)) return DBGCCmdHlpVBoxError(pCmdHlp, rc, "Reading PML4E memory at %DV.\n", &VarCur); if (!Pml4e.n.u1Present) return DBGCCmdHlpPrintf(pCmdHlp, "Page directory pointer table is not present for %Dv.\n", &VarGCPtr); VarCur.u.u64Number = Pml4e.u & X86_PML4E_PG_MASK; Assert(fPAE); } if (fPAE) { /* Page directory pointer table. */ X86PDPE Pdpe; VarCur.u.u64Number += ((VarGCPtr.u.GCFlat >> X86_PDPTR_SHIFT) & X86_PDPTR_MASK) * sizeof(Pdpe); rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &Pdpe, sizeof(Pdpe), &VarCur, NULL); if (VBOX_FAILURE(rc)) return DBGCCmdHlpVBoxError(pCmdHlp, rc, "Reading PDPE memory at %DV.\n", &VarCur); if (!Pdpe.n.u1Present) return DBGCCmdHlpPrintf(pCmdHlp, "Page directory is not present for %Dv.\n", &VarGCPtr); VarCur.u.u64Number = Pdpe.u & X86_PDPE_PG_MASK; /* Page directory (PAE). */ X86PDEPAE Pde; VarCur.u.u64Number += ((VarGCPtr.u.GCFlat >> X86_PD_PAE_SHIFT) & X86_PD_PAE_MASK) * sizeof(Pde); rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &Pde, sizeof(Pde), &VarCur, NULL); if (VBOX_FAILURE(rc)) return DBGCCmdHlpVBoxError(pCmdHlp, rc, "Reading PDE memory at %DV.\n", &VarCur); if (!Pde.n.u1Present) return DBGCCmdHlpPrintf(pCmdHlp, "Page table is not present for %Dv.\n", &VarGCPtr); if (fPSE && Pde.n.u1Size) return pCmdHlp->pfnExec(pCmdHlp, "dpd%s %Dv L3", &pCmd->pszCmd[3], &VarGCPtr); iEntry = (VarGCPtr.u.GCFlat >> X86_PT_PAE_SHIFT) & X86_PT_PAE_MASK; VarPTEAddr = VarCur; VarPTEAddr.u.u64Number = Pde.u & X86_PDE_PAE_PG_MASK; VarPTEAddr.u.u64Number += iEntry * sizeof(X86PTEPAE); } else { /* Page directory (legacy). */ X86PDE Pde; VarCur.u.u64Number += ((VarGCPtr.u.GCFlat >> X86_PD_SHIFT) & X86_PD_MASK) * sizeof(Pde); rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &Pde, sizeof(Pde), &VarCur, NULL); if (VBOX_FAILURE(rc)) return DBGCCmdHlpVBoxError(pCmdHlp, rc, "Reading PDE memory at %DV.\n", &VarCur); if (!Pde.n.u1Present) return DBGCCmdHlpPrintf(pCmdHlp, "Page table is not present for %Dv.\n", &VarGCPtr); if (fPSE && Pde.n.u1Size) return pCmdHlp->pfnExec(pCmdHlp, "dpd%s %Dv L3", &pCmd->pszCmd[3], &VarGCPtr); iEntry = (VarGCPtr.u.GCFlat >> X86_PT_SHIFT) & X86_PT_MASK; VarPTEAddr = VarCur; VarPTEAddr.u.u64Number = Pde.u & X86_PDE_PG_MASK; VarPTEAddr.u.u64Number += iEntry * sizeof(X86PTE); } cEntriesMax = (PAGE_SIZE - iEntry) / cbEntry; iEntry /= cbEntry; } /* adjust cEntries */ cEntries = RT_MAX(1, cEntries); cEntries = RT_MIN(cEntries, cEntriesMax); /* * The display loop. */ DBGCCmdHlpPrintf(pCmdHlp, iEntry != ~0U ? "%DV (base %DV / index %#x):\n" : "%DV:\n", &VarPTEAddr, &VarGCPtr, iEntry); do { /* * Read. */ X86PTEPAE Pte; Pte.u = 0; rc = pCmdHlp->pfnMemRead(pCmdHlp, pVM, &Pte, cbEntry, &VarPTEAddr, NULL); if (VBOX_FAILURE(rc)) return DBGCCmdHlpVBoxError(pCmdHlp, rc, "Reading PTE memory at %DV.\n", &VarPTEAddr); /* * Display. */ if (iEntry != ~0U) { DBGCCmdHlpPrintf(pCmdHlp, "%03x %DV: ", iEntry, &VarGCPtr); iEntry++; } DBGCCmdHlpPrintf(pCmdHlp, fPAE ? "%016llx 4kb phys=%016llx %s %s %s %s %s avl=%02x %s %s %s %s %s" : "%08llx 4kb phys=%08llx %s %s %s %s %s avl=%02x %s %s %s %s %s", Pte.u, Pte.u & X86_PTE_PAE_PG_MASK, Pte.n.u1Present ? "p " : "np", Pte.n.u1Write ? "w" : "r", Pte.n.u1User ? "u" : "s", Pte.n.u1Accessed ? "a " : "na", Pte.n.u1Dirty ? "d " : "nd", Pte.n.u3Available, Pte.n.u1Global ? (fPGE ? "g" : "G") : " ", Pte.n.u1WriteThru ? "pwt" : " ", Pte.n.u1CacheDisable ? "pcd" : " ", Pte.n.u1PAT ? "pat" : " ", Pte.n.u1NoExecute ? (fNXE ? "nx" : "NX") : " " ); if (Pte.u & UINT64_C(0x7fff000000000000)) DBGCCmdHlpPrintf(pCmdHlp, " weird=%RX64", (Pte.u & UINT64_C(0x7fff000000000000))); rc = DBGCCmdHlpPrintf(pCmdHlp, "\n"); if (VBOX_FAILURE(rc)) return rc; /* * Advance. */ VarPTEAddr.u.u64Number += cbEntry; if (iEntry != ~0U) VarGCPtr.u.GCFlat += PAGE_SIZE; } while (cEntries-- > 0); NOREF(pResult); return VINF_SUCCESS; } /** * The 'dptb' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdDumpPageTableBoth(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { if (!pVM) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: No VM.\n"); int rc1 = pCmdHlp->pfnExec(pCmdHlp, "dptg %DV", &paArgs[0]); int rc2 = pCmdHlp->pfnExec(pCmdHlp, "dpth %DV", &paArgs[0]); if (VBOX_FAILURE(rc1)) return rc1; NOREF(pCmd); NOREF(cArgs); NOREF(pResult); return rc2; } /** * The 'dt' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdDumpTSS(PCDBGCCMD /*pCmd*/, PDBGCCMDHLP pCmdHlp, PVM /*pVM*/, PCDBGCVAR /*paArgs*/, unsigned /*cArgs*/, PDBGCVAR /*pResult*/) { /* * We can get a TSS selector (number), a far pointer using a TSS selector, or some kind of TSS pointer. */ /** @todo */ return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "dt is not implemented yet, feel free to do it. \n"); } /** * The 'm' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdMemoryInfo(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Address: %DV\n", &paArgs[0]); if (!pVM) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: No VM.\n"); int rc1 = pCmdHlp->pfnExec(pCmdHlp, "dpdg %DV", &paArgs[0]); int rc2 = pCmdHlp->pfnExec(pCmdHlp, "dpdh %DV", &paArgs[0]); int rc3 = pCmdHlp->pfnExec(pCmdHlp, "dptg %DV", &paArgs[0]); int rc4 = pCmdHlp->pfnExec(pCmdHlp, "dpth %DV", &paArgs[0]); if (VBOX_FAILURE(rc1)) return rc1; if (VBOX_FAILURE(rc2)) return rc2; if (VBOX_FAILURE(rc3)) return rc3; NOREF(pCmd); NOREF(cArgs); NOREF(pResult); return rc4; } /** * The 'echo' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdEcho(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { /* * Loop thru the arguments and print them with one space between. */ int rc = 0; for (unsigned i = 0; i < cArgs; i++) { if (paArgs[i].enmType == DBGCVAR_TYPE_STRING) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, i ? " %s" : "%s", paArgs[i].u.pszString); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, i ? " " : ""); if (VBOX_FAILURE(rc)) return rc; } NOREF(pCmd); NOREF(pResult); NOREF(pVM); return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "\n"); } /** * The 'echo' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdRunScript(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { /* check that the parser did what it's supposed to do. */ if ( cArgs != 1 || paArgs[0].enmType != DBGCVAR_TYPE_STRING) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "parser error\n"); /* * Try open the script. */ const char *pszFilename = paArgs[0].u.pszString; FILE *pFile = fopen(pszFilename, "r"); if (!pFile) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Failed to open '%s'.\n", pszFilename); /* * Execute it line by line. */ int rc = 0; unsigned iLine = 0; char szLine[8192]; while (fgets(szLine, sizeof(szLine), pFile)) { /* check that the line isn't too long. */ char *pszEnd = strchr(szLine, '\0'); if (pszEnd == &szLine[sizeof(szLine) - 1]) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "runscript error: Line #%u is too long\n", iLine); break; } iLine++; /* strip leading blanks and check for comment / blank line. */ char *psz = RTStrStripL(szLine); if ( *psz == '\0' || *psz == '\n' || *psz == '#') continue; /* strip trailing blanks and check for empty line (\r case). */ while ( pszEnd > psz && isspace(pszEnd[-1])) /* isspace includes \n and \r normally. */ *--pszEnd = '\0'; /** @todo check for Control-C / Cancel at this point... */ /* * Execute the command. * * This is a bit wasteful with scratch space btw., can fix it later. * The whole return code crap should be fixed too, so that it's possible * to know whether a command succeeded (VBOX_SUCCESS()) or failed, and * more importantly why it failed. */ rc = pCmdHlp->pfnExec(pCmdHlp, "%s", psz); if (VBOX_FAILURE(rc)) { if (rc == VERR_BUFFER_OVERFLOW) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "runscript error: Line #%u is too long (exec overflowed)\n", iLine); break; } if (rc == VWRN_DBGC_CMD_PENDING) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "runscript error: VWRN_DBGC_CMD_PENDING on line #%u, script terminated\n", iLine); break; } } fclose(pFile); NOREF(pCmd); NOREF(pResult); NOREF(pVM); return rc; } /** * Print formatted string. * * @param pHlp Pointer to this structure. * @param pszFormat The format string. * @param ... Arguments. */ static DECLCALLBACK(void) dbgcCmdInfo_Printf(PCDBGFINFOHLP pHlp, const char *pszFormat, ...) { PDBGCCMDHLP pCmdHlp = *(PDBGCCMDHLP *)(pHlp + 1); va_list args; va_start(args, pszFormat); pCmdHlp->pfnPrintfV(pCmdHlp, NULL, pszFormat, args); va_end(args); } /** * Print formatted string. * * @param pHlp Pointer to this structure. * @param pszFormat The format string. * @param args Argument list. */ static DECLCALLBACK(void) dbgcCmdInfo_PrintfV(PCDBGFINFOHLP pHlp, const char *pszFormat, va_list args) { PDBGCCMDHLP pCmdHlp = *(PDBGCCMDHLP *)(pHlp + 1); pCmdHlp->pfnPrintfV(pCmdHlp, NULL, pszFormat, args); } /** * The 'info' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdInfo(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { /* * Validate input. */ if ( cArgs < 1 || cArgs > 2 || paArgs[0].enmType != DBGCVAR_TYPE_STRING || paArgs[cArgs - 1].enmType != DBGCVAR_TYPE_STRING) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "internal error: The parser doesn't do its job properly yet.. quote the string.\n"); if (!pVM) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: No VM.\n"); /* * Dump it. */ struct { DBGFINFOHLP Hlp; PDBGCCMDHLP pCmdHlp; } Hlp = { { dbgcCmdInfo_Printf, dbgcCmdInfo_PrintfV }, pCmdHlp }; int rc = DBGFR3Info(pVM, paArgs[0].u.pszString, cArgs == 2 ? paArgs[1].u.pszString : NULL, &Hlp.Hlp); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3Info()\n"); NOREF(pCmd); NOREF(pResult); return 0; } /** * The 'log' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdLog(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { int rc = DBGFR3LogModifyGroups(pVM, paArgs[0].u.pszString); if (VBOX_SUCCESS(rc)) return VINF_SUCCESS; NOREF(pCmd); NOREF(cArgs); NOREF(pResult); return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3LogModifyGroups(%p,'%s')\n", pVM, paArgs[0].u.pszString); } /** * The 'logdest' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdLogDest(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { int rc = DBGFR3LogModifyDestinations(pVM, paArgs[0].u.pszString); if (VBOX_SUCCESS(rc)) return VINF_SUCCESS; NOREF(pCmd); NOREF(cArgs); NOREF(pResult); return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3LogModifyDestinations(%p,'%s')\n", pVM, paArgs[0].u.pszString); } /** * The 'logflags' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdLogFlags(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { int rc = DBGFR3LogModifyFlags(pVM, paArgs[0].u.pszString); if (VBOX_SUCCESS(rc)) return VINF_SUCCESS; NOREF(pCmd); NOREF(cArgs); NOREF(pResult); return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3LogModifyFlags(%p,'%s')\n", pVM, paArgs[0].u.pszString); } /** * The 'format' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdFormat(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { LogFlow(("dbgcCmdFormat\n")); static const char *apszRangeDesc[] = { "none", "bytes", "elements" }; int rc; for (unsigned iArg = 0; iArg < cArgs; iArg++) { switch (paArgs[iArg].enmType) { case DBGCVAR_TYPE_UNKNOWN: rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Unknown variable type!\n"); break; case DBGCVAR_TYPE_GC_FLAT: if (paArgs[iArg].enmRangeType != DBGCVAR_RANGE_NONE) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Guest flat address: %%%08x range %lld %s\n", paArgs[iArg].u.GCFlat, paArgs[iArg].u64Range, apszRangeDesc[paArgs[iArg].enmRangeType]); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Guest flat address: %%%08x\n", paArgs[iArg].u.GCFlat); break; case DBGCVAR_TYPE_GC_FAR: if (paArgs[iArg].enmRangeType != DBGCVAR_RANGE_NONE) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Guest far address: %04x:%08x range %lld %s\n", paArgs[iArg].u.GCFar.sel, paArgs[iArg].u.GCFar.off, paArgs[iArg].u64Range, apszRangeDesc[paArgs[iArg].enmRangeType]); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Guest far address: %04x:%08x\n", paArgs[iArg].u.GCFar.sel, paArgs[iArg].u.GCFar.off); break; case DBGCVAR_TYPE_GC_PHYS: if (paArgs[iArg].enmRangeType != DBGCVAR_RANGE_NONE) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Guest physical address: %%%%%08x range %lld %s\n", paArgs[iArg].u.GCPhys, paArgs[iArg].u64Range, apszRangeDesc[paArgs[iArg].enmRangeType]); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Guest physical address: %%%%%08x\n", paArgs[iArg].u.GCPhys); break; case DBGCVAR_TYPE_HC_FLAT: if (paArgs[iArg].enmRangeType != DBGCVAR_RANGE_NONE) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Host flat address: %%%08x range %lld %s\n", paArgs[iArg].u.pvHCFlat, paArgs[iArg].u64Range, apszRangeDesc[paArgs[iArg].enmRangeType]); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Host flat address: %%%08x\n", paArgs[iArg].u.pvHCFlat); break; case DBGCVAR_TYPE_HC_FAR: if (paArgs[iArg].enmRangeType != DBGCVAR_RANGE_NONE) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Host far address: %04x:%08x range %lld %s\n", paArgs[iArg].u.HCFar.sel, paArgs[iArg].u.HCFar.off, paArgs[iArg].u64Range, apszRangeDesc[paArgs[iArg].enmRangeType]); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Host far address: %04x:%08x\n", paArgs[iArg].u.HCFar.sel, paArgs[iArg].u.HCFar.off); break; case DBGCVAR_TYPE_HC_PHYS: if (paArgs[iArg].enmRangeType != DBGCVAR_RANGE_NONE) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Host physical address: %VHp range %lld %s\n", paArgs[iArg].u.HCPhys, paArgs[iArg].u64Range, apszRangeDesc[paArgs[iArg].enmRangeType]); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Host physical address: %VHp\n", paArgs[iArg].u.HCPhys); break; case DBGCVAR_TYPE_STRING: rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "String, %lld bytes long: %s\n", paArgs[iArg].u64Range, paArgs[iArg].u.pszString); break; case DBGCVAR_TYPE_NUMBER: if (paArgs[iArg].enmRangeType != DBGCVAR_RANGE_NONE) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Number: hex %llx dec 0i%lld oct 0t%llo range %lld %s\n", paArgs[iArg].u.u64Number, paArgs[iArg].u.u64Number, paArgs[iArg].u.u64Number, paArgs[iArg].u64Range, apszRangeDesc[paArgs[iArg].enmRangeType]); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Number: hex %llx dec 0i%lld oct 0t%llo\n", paArgs[iArg].u.u64Number, paArgs[iArg].u.u64Number, paArgs[iArg].u.u64Number); break; default: rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Invalid argument type %d\n", paArgs[iArg].enmType); break; } } /* arg loop */ NOREF(pCmd); NOREF(pVM); NOREF(pResult); return 0; } /** * List near symbol. * * @returns VBox status code. * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param pArg Pointer to the address or symbol to lookup. */ static int dbgcDoListNear(PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR pArg, PDBGCVAR pResult) { dbgcVarSetGCFlat(pResult, 0); DBGFSYMBOL Symbol; int rc; if (pArg->enmType == DBGCVAR_TYPE_SYMBOL) { /* * Lookup the symbol address. */ rc = DBGFR3SymbolByName(pVM, pArg->u.pszString, &Symbol); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3SymbolByName(, %s,)\n", pArg->u.pszString); rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%VGv %s\n", (RTGCUINTPTR)Symbol.Value, Symbol.szName); /** @todo remove the RTUINGCPTR cast once DBGF got correct interfaces! */ dbgcVarSetGCFlatByteRange(pResult, Symbol.Value, Symbol.cb); } else { /* * Convert it to a flat GC address and lookup that address. */ DBGCVAR AddrVar; rc = pCmdHlp->pfnEval(pCmdHlp, &AddrVar, "%%(%DV)", pArg); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "%%(%DV)\n", pArg); dbgcVarSetVar(pResult, &AddrVar); RTGCINTPTR offDisp = 0; rc = DBGFR3SymbolByAddr(pVM, AddrVar.u.GCFlat, &offDisp, &Symbol); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGFR3SymbolByAddr(, %VGv,,)\n", AddrVar.u.GCFlat); if (!offDisp) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%DV %s", &AddrVar, Symbol.szName); else if (offDisp > 0) rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%DV %s + %RGv", &AddrVar, Symbol.szName, offDisp); else rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%DV %s - %RGv", &AddrVar, Symbol.szName, -offDisp); if ((RTGCINTPTR)Symbol.cb > -offDisp) { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, " LB %RGv\n", Symbol.cb + offDisp); dbgcVarSetByteRange(pResult, Symbol.cb + offDisp); } else { rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "\n"); dbgcVarSetNoRange(pResult); } } return rc; } /** * The 'ln' (listnear) command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdListNear(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { dbgcVarSetGCFlat(pResult, 0); if (!cArgs) { /* * Current cs:eip symbol. */ DBGCVAR AddrVar; int rc = pCmdHlp->pfnEval(pCmdHlp, &AddrVar, "%%(cs:eip)"); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "%%(cs:eip)\n"); return dbgcDoListNear(pCmdHlp, pVM, &AddrVar, pResult); } /* * Iterate arguments. */ for (unsigned iArg = 0; iArg < cArgs; iArg++) { int rc = dbgcDoListNear(pCmdHlp, pVM, &paArgs[iArg], pResult); if (VBOX_FAILURE(rc)) return rc; } NOREF(pCmd); NOREF(pResult); return VINF_SUCCESS; } /** * The 'loadsyms' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdLoadSyms(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { /* * Validate the parsing and make sense of the input. * This is a mess as usual because we don't trust the parser yet. */ if ( cArgs < 1 || paArgs[0].enmType != DBGCVAR_TYPE_STRING) { AssertMsgFailed(("Parse error, first argument required to be string!\n")); return VERR_PARSE_INCORRECT_ARG_TYPE; } DBGCVAR AddrVar; RTGCUINTPTR Delta = 0; const char *pszModule = NULL; RTGCUINTPTR ModuleAddress = 0; unsigned cbModule = 0; if (cArgs > 1) { unsigned iArg = 1; if (paArgs[iArg].enmType == DBGCVAR_TYPE_NUMBER) { Delta = (RTGCUINTPTR)paArgs[iArg].u.u64Number; iArg++; } if (iArg < cArgs) { if (paArgs[iArg].enmType != DBGCVAR_TYPE_STRING) { AssertMsgFailed(("Parse error, module argument required to be string!\n")); return VERR_PARSE_INCORRECT_ARG_TYPE; } pszModule = paArgs[iArg].u.pszString; iArg++; if (iArg < cArgs) { if (DBGCVAR_ISPOINTER(paArgs[iArg].enmType)) { AssertMsgFailed(("Parse error, module argument required to be GC pointer!\n")); return VERR_PARSE_INCORRECT_ARG_TYPE; } int rc = pCmdHlp->pfnEval(pCmdHlp, &AddrVar, "%%(%Dv)", &paArgs[iArg]); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "Module address cast %%(%Dv) failed.", &paArgs[iArg]); ModuleAddress = paArgs[iArg].u.GCFlat; iArg++; if (iArg < cArgs) { if (paArgs[iArg].enmType != DBGCVAR_TYPE_NUMBER) { AssertMsgFailed(("Parse error, module argument required to be an interger!\n")); return VERR_PARSE_INCORRECT_ARG_TYPE; } cbModule = (unsigned)paArgs[iArg].u.u64Number; iArg++; if (iArg < cArgs) { AssertMsgFailed(("Parse error, too many arguments!\n")); return VERR_PARSE_TOO_MANY_ARGUMENTS; } } } } } /* * Call the debug info manager about this loading... */ int rc = DBGFR3ModuleLoad(pVM, paArgs[0].u.pszString, Delta, pszModule, ModuleAddress, cbModule); if (VBOX_FAILURE(rc)) return pCmdHlp->pfnVBoxError(pCmdHlp, rc, "DBGInfoSymbolLoad(, '%s', %VGv, '%s', %VGv, 0)\n", paArgs[0].u.pszString, Delta, pszModule, ModuleAddress); NOREF(pCmd); NOREF(pResult); return VINF_SUCCESS; } /** * The 'set' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdSet(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* parse sanity check. */ AssertMsg(paArgs[0].enmType == DBGCVAR_TYPE_STRING, ("expected string not %d as first arg!\n", paArgs[0].enmType)); if (paArgs[0].enmType != DBGCVAR_TYPE_STRING) return VERR_PARSE_INCORRECT_ARG_TYPE; /* * A variable must start with an alpha chars and only contain alpha numerical chars. */ const char *pszVar = paArgs[0].u.pszString; if (!isalpha(*pszVar) || *pszVar == '_') return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "syntax error: Invalid variable name '%s'. Variable names must match regex '[_a-zA-Z][_a-zA-Z0-9*'!", paArgs[0].u.pszString); while (isalnum(*pszVar) || *pszVar == '_') *pszVar++; if (*pszVar) return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "syntax error: Invalid variable name '%s'. Variable names must match regex '[_a-zA-Z][_a-zA-Z0-9*]'!", paArgs[0].u.pszString); /* * Calc variable size. */ size_t cbVar = (size_t)paArgs[0].u64Range + sizeof(DBGCNAMEDVAR); if (paArgs[1].enmType == DBGCVAR_TYPE_STRING) cbVar += 1 + (size_t)paArgs[1].u64Range; /* * Look for existing one. */ pszVar = paArgs[0].u.pszString; for (unsigned iVar = 0; iVar < pDbgc->cVars; iVar++) { if (!strcmp(pszVar, pDbgc->papVars[iVar]->szName)) { /* * Update existing variable. */ void *pv = RTMemRealloc(pDbgc->papVars[iVar], cbVar); if (!pv) return VERR_PARSE_NO_MEMORY; PDBGCNAMEDVAR pVar = pDbgc->papVars[iVar] = (PDBGCNAMEDVAR)pv; pVar->Var = paArgs[1]; memcpy(pVar->szName, paArgs[0].u.pszString, (size_t)paArgs[0].u64Range + 1); if (paArgs[1].enmType == DBGCVAR_TYPE_STRING) pVar->Var.u.pszString = (char *)memcpy(&pVar->szName[paArgs[0].u64Range + 1], paArgs[1].u.pszString, (size_t)paArgs[1].u64Range + 1); return 0; } } /* * Allocate another. */ PDBGCNAMEDVAR pVar = (PDBGCNAMEDVAR)RTMemAlloc(cbVar); pVar->Var = paArgs[1]; memcpy(pVar->szName, pszVar, (size_t)paArgs[0].u64Range + 1); if (paArgs[1].enmType == DBGCVAR_TYPE_STRING) pVar->Var.u.pszString = (char *)memcpy(&pVar->szName[paArgs[0].u64Range + 1], paArgs[1].u.pszString, (size_t)paArgs[1].u64Range + 1); /* need to reallocate the pointer array too? */ if (!(pDbgc->cVars % 0x20)) { void *pv = RTMemRealloc(pDbgc->papVars, (pDbgc->cVars + 0x20) * sizeof(pDbgc->papVars[0])); if (!pv) { RTMemFree(pVar); return VERR_PARSE_NO_MEMORY; } pDbgc->papVars = (PDBGCNAMEDVAR *)pv; } pDbgc->papVars[pDbgc->cVars++] = pVar; NOREF(pCmd); NOREF(pVM); NOREF(cArgs); NOREF(pResult); return 0; } /** * The 'unset' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdUnset(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Don't trust the parser. */ for (unsigned i = 0; i < cArgs; i++) if (paArgs[i].enmType != DBGCVAR_TYPE_STRING) { AssertMsgFailed(("expected strings only. (arg=%d)!\n", i)); return VERR_PARSE_INCORRECT_ARG_TYPE; } /* * Iterate the variables and unset them. */ for (unsigned iArg = 0; iArg < cArgs; iArg++) { const char *pszVar = paArgs[iArg].u.pszString; /* * Look up the variable. */ for (unsigned iVar = 0; iVar < pDbgc->cVars; iVar++) { if (!strcmp(pszVar, pDbgc->papVars[iVar]->szName)) { /* * Shuffle the array removing this entry. */ void *pvFree = pDbgc->papVars[iVar]; if (iVar + 1 < pDbgc->cVars) memmove(&pDbgc->papVars[iVar], &pDbgc->papVars[iVar + 1], (pDbgc->cVars - iVar - 1) * sizeof(pDbgc->papVars[0])); pDbgc->papVars[--pDbgc->cVars] = NULL; RTMemFree(pvFree); } } /* lookup */ } /* arg loop */ NOREF(pCmd); NOREF(pVM); NOREF(pResult); return 0; } /** * The 'loadvars' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdLoadVars(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { /* * Don't trust the parser. */ if ( cArgs != 1 || paArgs[0].enmType != DBGCVAR_TYPE_STRING) { AssertMsgFailed(("Expected one string exactly!\n")); return VERR_PARSE_INCORRECT_ARG_TYPE; } /* * Iterate the variables and unset them. */ FILE *pFile = fopen(paArgs[0].u.pszString, "r"); if (pFile) { char szLine[4096]; while (fgets(szLine, sizeof(szLine), pFile)) { /* Strip it. */ char *psz = szLine; while (isblank(*psz)) psz++; int i = strlen(psz) - 1; while (i >= 0 && isspace(psz[i])) psz[i--] ='\0'; /* Execute it if not comment or empty line. */ if ( *psz != '\0' && *psz != '#' && *psz != ';') { pCmdHlp->pfnPrintf(pCmdHlp, NULL, "dbg: set %s", psz); pCmdHlp->pfnExec(pCmdHlp, "set %s", psz); } } fclose(pFile); } else return pCmdHlp->pfnPrintf(pCmdHlp, NULL, "Failed to open file '%s'.\n", paArgs[0].u.pszString); NOREF(pCmd); NOREF(pVM); NOREF(pResult); return 0; } /** * The 'showvars' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdShowVars(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); for (unsigned iVar = 0; iVar < pDbgc->cVars; iVar++) { int rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "%-20s ", &pDbgc->papVars[iVar]->szName); if (!rc) rc = dbgcCmdFormat(pCmd, pCmdHlp, pVM, &pDbgc->papVars[iVar]->Var, 1, NULL); if (rc) return rc; } NOREF(paArgs); NOREF(cArgs); NOREF(pResult); return 0; } /** * The 'harakiri' command. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. */ static DECLCALLBACK(int) dbgcCmdHarakiri(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs, PDBGCVAR pResult) { Log(("dbgcCmdHarakiri\n")); for (;;) exit(126); NOREF(pCmd); NOREF(pCmdHlp); NOREF(pVM); NOREF(paArgs); NOREF(cArgs); NOREF(pResult); } //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// // // // B u l t i n S y m b o l s // // //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// /** * Get builtin register symbol. * * The uUser is special for these symbol descriptors. See the SYMREG_* \#defines. * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pSymDesc Pointer to the symbol descriptor. * @param pCmdHlp Pointer to the command callback structure. * @param enmType The result type. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcSymGetReg(PCDBGCSYM pSymDesc, PDBGCCMDHLP pCmdHlp, DBGCVARTYPE enmType, PDBGCVAR pResult) { LogFlow(("dbgcSymSetReg: pSymDesc->pszName=%d\n", pSymDesc->pszName)); /* * pVM is required. */ PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); Assert(pDbgc->pVM); /* * Get the right CPU context. */ PCPUMCTX pCtx; int rc; if (!(pSymDesc->uUser & SYMREG_FLAGS_HYPER)) rc = CPUMQueryGuestCtxPtr(pDbgc->pVM, &pCtx); else rc = CPUMQueryHyperCtxPtr(pDbgc->pVM, &pCtx); if (VBOX_FAILURE(rc)) return rc; /* * Get the value. */ void *pvValue = (char *)pCtx + SYMREG_OFFSET(pSymDesc->uUser); uint64_t u64; switch (SYMREG_SIZE(pSymDesc->uUser)) { case 1: u64 = *(uint8_t *)pvValue; break; case 2: u64 = *(uint16_t *)pvValue; break; case 4: u64 = *(uint32_t *)pvValue; break; case 6: u64 = *(uint32_t *)pvValue | ((uint64_t)*(uint16_t *)((char *)pvValue + sizeof(uint32_t)) << 32); break; case 8: u64 = *(uint64_t *)pvValue; break; default: return VERR_PARSE_NOT_IMPLEMENTED; } /* * Construct the desired result. */ if (enmType == DBGCVAR_TYPE_ANY) enmType = DBGCVAR_TYPE_NUMBER; pResult->pDesc = NULL; pResult->pNext = NULL; pResult->enmType = enmType; pResult->enmRangeType = DBGCVAR_RANGE_NONE; pResult->u64Range = 0; switch (enmType) { case DBGCVAR_TYPE_GC_FLAT: pResult->u.GCFlat = (RTGCPTR)u64; break; case DBGCVAR_TYPE_GC_FAR: switch (SYMREG_SIZE(pSymDesc->uUser)) { case 4: if (!(pSymDesc->uUser & SYMREG_FLAGS_HIGH_SEL)) { pResult->u.GCFar.off = (uint16_t)u64; pResult->u.GCFar.sel = (uint16_t)(u64 >> 16); } else { pResult->u.GCFar.sel = (uint16_t)u64; pResult->u.GCFar.off = (uint16_t)(u64 >> 16); } break; case 6: if (!(pSymDesc->uUser & SYMREG_FLAGS_HIGH_SEL)) { pResult->u.GCFar.off = (uint32_t)u64; pResult->u.GCFar.sel = (uint16_t)(u64 >> 32); } else { pResult->u.GCFar.sel = (uint32_t)u64; pResult->u.GCFar.off = (uint16_t)(u64 >> 32); } break; default: return VERR_PARSE_BAD_RESULT_TYPE; } break; case DBGCVAR_TYPE_GC_PHYS: pResult->u.GCPhys = (RTGCPHYS)u64; break; case DBGCVAR_TYPE_HC_FLAT: pResult->u.pvHCFlat = (void *)(uintptr_t)u64; break; case DBGCVAR_TYPE_HC_FAR: switch (SYMREG_SIZE(pSymDesc->uUser)) { case 4: if (!(pSymDesc->uUser & SYMREG_FLAGS_HIGH_SEL)) { pResult->u.HCFar.off = (uint16_t)u64; pResult->u.HCFar.sel = (uint16_t)(u64 >> 16); } else { pResult->u.HCFar.sel = (uint16_t)u64; pResult->u.HCFar.off = (uint16_t)(u64 >> 16); } break; case 6: if (!(pSymDesc->uUser & SYMREG_FLAGS_HIGH_SEL)) { pResult->u.HCFar.off = (uint32_t)u64; pResult->u.HCFar.sel = (uint16_t)(u64 >> 32); } else { pResult->u.HCFar.sel = (uint32_t)u64; pResult->u.HCFar.off = (uint16_t)(u64 >> 32); } break; default: return VERR_PARSE_BAD_RESULT_TYPE; } break; case DBGCVAR_TYPE_HC_PHYS: pResult->u.GCPhys = (RTGCPHYS)u64; break; case DBGCVAR_TYPE_NUMBER: pResult->u.u64Number = u64; break; case DBGCVAR_TYPE_STRING: case DBGCVAR_TYPE_UNKNOWN: default: return VERR_PARSE_BAD_RESULT_TYPE; } return 0; } /** * Set builtin register symbol. * * The uUser is special for these symbol descriptors. See the SYMREG_* #defines. * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pSymDesc Pointer to the symbol descriptor. * @param pCmdHlp Pointer to the command callback structure. * @param pValue The value to assign the symbol. */ static DECLCALLBACK(int) dbgcSymSetReg(PCDBGCSYM pSymDesc, PDBGCCMDHLP pCmdHlp, PCDBGCVAR pValue) { LogFlow(("dbgcSymSetReg: pSymDesc->pszName=%d\n", pSymDesc->pszName)); /* * pVM is required. */ PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); Assert(pDbgc->pVM); /* * Get the right CPU context. */ PCPUMCTX pCtx; int rc; if (!(pSymDesc->uUser & SYMREG_FLAGS_HYPER)) rc = CPUMQueryGuestCtxPtr(pDbgc->pVM, &pCtx); else rc = CPUMQueryHyperCtxPtr(pDbgc->pVM, &pCtx); if (VBOX_FAILURE(rc)) return rc; /* * Check the new value. */ if (pValue->enmType != DBGCVAR_TYPE_NUMBER) return VERR_PARSE_ARGUMENT_TYPE_MISMATCH; /* * Set the value. */ void *pvValue = (char *)pCtx + SYMREG_OFFSET(pSymDesc->uUser); switch (SYMREG_SIZE(pSymDesc->uUser)) { case 1: *(uint8_t *)pvValue = (uint8_t)pValue->u.u64Number; break; case 2: *(uint16_t *)pvValue = (uint16_t)pValue->u.u64Number; break; case 4: *(uint32_t *)pvValue = (uint32_t)pValue->u.u64Number; break; case 6: *(uint32_t *)pvValue = (uint32_t)pValue->u.u64Number; ((uint16_t *)pvValue)[3] = (uint16_t)(pValue->u.u64Number >> 32); break; case 8: *(uint64_t *)pvValue = pValue->u.u64Number; break; default: return VERR_PARSE_NOT_IMPLEMENTED; } return VINF_SUCCESS; } //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// // // // O p e r a t o r s // // //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// /** * Minus (unary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpMinus(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult) { // LogFlow(("dbgcOpMinus\n")); *pResult = *pArg; switch (pArg->enmType) { case DBGCVAR_TYPE_GC_FLAT: pResult->u.GCFlat = -(RTGCINTPTR)pResult->u.GCFlat; break; case DBGCVAR_TYPE_GC_FAR: pResult->u.GCFar.off = -(int32_t)pResult->u.GCFar.off; break; case DBGCVAR_TYPE_GC_PHYS: pResult->u.GCPhys = (RTGCPHYS) -(int64_t)pResult->u.GCPhys; break; case DBGCVAR_TYPE_HC_FLAT: pResult->u.pvHCFlat = (void *) -(intptr_t)pResult->u.pvHCFlat; break; case DBGCVAR_TYPE_HC_FAR: pResult->u.HCFar.off = -(int32_t)pResult->u.HCFar.off; break; case DBGCVAR_TYPE_HC_PHYS: pResult->u.HCPhys = (RTHCPHYS) -(int64_t)pResult->u.HCPhys; break; case DBGCVAR_TYPE_NUMBER: pResult->u.u64Number = -(int64_t)pResult->u.u64Number; break; case DBGCVAR_TYPE_UNKNOWN: case DBGCVAR_TYPE_STRING: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } NOREF(pDbgc); return 0; } /** * Pluss (unary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpPluss(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult) { // LogFlow(("dbgcOpPluss\n")); *pResult = *pArg; switch (pArg->enmType) { case DBGCVAR_TYPE_GC_FLAT: case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: case DBGCVAR_TYPE_NUMBER: break; case DBGCVAR_TYPE_UNKNOWN: case DBGCVAR_TYPE_STRING: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } NOREF(pDbgc); return 0; } /** * Boolean not (unary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpBooleanNot(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult) { // LogFlow(("dbgcOpBooleanNot\n")); *pResult = *pArg; switch (pArg->enmType) { case DBGCVAR_TYPE_GC_FLAT: pResult->u.u64Number = !pResult->u.GCFlat; break; case DBGCVAR_TYPE_GC_FAR: pResult->u.u64Number = !pResult->u.GCFar.off && pResult->u.GCFar.sel <= 3; break; case DBGCVAR_TYPE_GC_PHYS: pResult->u.u64Number = !pResult->u.GCPhys; break; case DBGCVAR_TYPE_HC_FLAT: pResult->u.u64Number = !pResult->u.pvHCFlat; break; case DBGCVAR_TYPE_HC_FAR: pResult->u.u64Number = !pResult->u.HCFar.off && pResult->u.HCFar.sel <= 3; break; case DBGCVAR_TYPE_HC_PHYS: pResult->u.u64Number = !pResult->u.HCPhys; break; case DBGCVAR_TYPE_NUMBER: pResult->u.u64Number = !pResult->u.u64Number; break; case DBGCVAR_TYPE_STRING: pResult->u.u64Number = !pResult->u64Range; break; case DBGCVAR_TYPE_UNKNOWN: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } pResult->enmType = DBGCVAR_TYPE_NUMBER; NOREF(pDbgc); return 0; } /** * Bitwise not (unary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpBitwiseNot(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult) { // LogFlow(("dbgcOpBitwiseNot\n")); *pResult = *pArg; switch (pArg->enmType) { case DBGCVAR_TYPE_GC_FLAT: pResult->u.GCFlat = ~pResult->u.GCFlat; break; case DBGCVAR_TYPE_GC_FAR: pResult->u.GCFar.off = ~pResult->u.GCFar.off; break; case DBGCVAR_TYPE_GC_PHYS: pResult->u.GCPhys = ~pResult->u.GCPhys; break; case DBGCVAR_TYPE_HC_FLAT: pResult->u.pvHCFlat = (void *)~(uintptr_t)pResult->u.pvHCFlat; break; case DBGCVAR_TYPE_HC_FAR: pResult->u.HCFar.off= ~pResult->u.HCFar.off; break; case DBGCVAR_TYPE_HC_PHYS: pResult->u.HCPhys = ~pResult->u.HCPhys; break; case DBGCVAR_TYPE_NUMBER: pResult->u.u64Number = ~pResult->u.u64Number; break; case DBGCVAR_TYPE_UNKNOWN: case DBGCVAR_TYPE_STRING: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } NOREF(pDbgc); return 0; } /** * Reference variable (unary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpVar(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult) { // LogFlow(("dbgcOpVar: %s\n", pArg->u.pszString)); /* * Parse sanity. */ if (pArg->enmType != DBGCVAR_TYPE_STRING) return VERR_PARSE_INCORRECT_ARG_TYPE; /* * Lookup the variable. */ const char *pszVar = pArg->u.pszString; for (unsigned iVar = 0; iVar < pDbgc->cVars; iVar++) { if (!strcmp(pszVar, pDbgc->papVars[iVar]->szName)) { *pResult = pDbgc->papVars[iVar]->Var; return 0; } } return VERR_PARSE_VARIABLE_NOT_FOUND; } /** * Flat address (unary). * * @returns VINF_SUCCESS on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpAddrFlat(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult) { // LogFlow(("dbgcOpAddrFlat\n")); int rc; *pResult = *pArg; switch (pArg->enmType) { case DBGCVAR_TYPE_GC_FLAT: return VINF_SUCCESS; case DBGCVAR_TYPE_GC_FAR: { Assert(pDbgc->pVM); DBGFADDRESS Address; rc = DBGFR3AddrFromSelOff(pDbgc->pVM, &Address, pArg->u.GCFar.sel, pArg->u.GCFar.off); if (VBOX_SUCCESS(rc)) { pResult->enmType = DBGCVAR_TYPE_GC_FLAT; pResult->u.GCFlat = Address.FlatPtr; return VINF_SUCCESS; } return VERR_PARSE_CONVERSION_FAILED; } case DBGCVAR_TYPE_GC_PHYS: //rc = MMR3PhysGCPhys2GCVirtEx(pDbgc->pVM, pResult->u.GCPhys, ..., &pResult->u.GCFlat); - yea, sure. return VERR_PARSE_INCORRECT_ARG_TYPE; case DBGCVAR_TYPE_HC_FLAT: return VINF_SUCCESS; case DBGCVAR_TYPE_HC_FAR: return VERR_PARSE_INCORRECT_ARG_TYPE; case DBGCVAR_TYPE_HC_PHYS: Assert(pDbgc->pVM); pResult->enmType = DBGCVAR_TYPE_HC_FLAT; rc = MMR3HCPhys2HCVirt(pDbgc->pVM, pResult->u.HCPhys, &pResult->u.pvHCFlat); if (VBOX_SUCCESS(rc)) return VINF_SUCCESS; return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_NUMBER: pResult->enmType = DBGCVAR_TYPE_GC_FLAT; pResult->u.GCFlat = (RTGCPTR)pResult->u.u64Number; return VINF_SUCCESS; case DBGCVAR_TYPE_STRING: return dbgcSymbolGet(pDbgc, pArg->u.pszString, DBGCVAR_TYPE_GC_FLAT, pResult); case DBGCVAR_TYPE_UNKNOWN: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } } /** * Physical address (unary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpAddrPhys(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult) { // LogFlow(("dbgcOpAddrPhys\n")); int rc; *pResult = *pArg; switch (pArg->enmType) { case DBGCVAR_TYPE_GC_FLAT: Assert(pDbgc->pVM); pResult->enmType = DBGCVAR_TYPE_GC_PHYS; rc = PGMPhysGCPtr2GCPhys(pDbgc->pVM, pArg->u.GCFlat, &pResult->u.GCPhys); if (VBOX_SUCCESS(rc)) return 0; /** @todo more memory types! */ return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_GC_FAR: { Assert(pDbgc->pVM); DBGFADDRESS Address; rc = DBGFR3AddrFromSelOff(pDbgc->pVM, &Address, pArg->u.GCFar.sel, pArg->u.GCFar.off); if (VBOX_SUCCESS(rc)) { pResult->enmType = DBGCVAR_TYPE_GC_PHYS; rc = PGMPhysGCPtr2GCPhys(pDbgc->pVM, Address.FlatPtr, &pResult->u.GCPhys); if (VBOX_SUCCESS(rc)) return 0; /** @todo more memory types! */ } return VERR_PARSE_CONVERSION_FAILED; } case DBGCVAR_TYPE_GC_PHYS: return 0; case DBGCVAR_TYPE_HC_FLAT: Assert(pDbgc->pVM); pResult->enmType = DBGCVAR_TYPE_GC_PHYS; rc = PGMR3DbgHCPtr2GCPhys(pDbgc->pVM, pArg->u.pvHCFlat, &pResult->u.GCPhys); if (VBOX_SUCCESS(rc)) return 0; /** @todo more memory types! */ return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_HC_FAR: return VERR_PARSE_INCORRECT_ARG_TYPE; case DBGCVAR_TYPE_HC_PHYS: return 0; case DBGCVAR_TYPE_NUMBER: pResult->enmType = DBGCVAR_TYPE_GC_PHYS; pResult->u.GCPhys = (RTGCPHYS)pResult->u.u64Number; return 0; case DBGCVAR_TYPE_STRING: return dbgcSymbolGet(pDbgc, pArg->u.pszString, DBGCVAR_TYPE_GC_PHYS, pResult); case DBGCVAR_TYPE_UNKNOWN: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } return 0; } /** * Physical host address (unary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpAddrHostPhys(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult) { // LogFlow(("dbgcOpAddrPhys\n")); int rc; *pResult = *pArg; switch (pArg->enmType) { case DBGCVAR_TYPE_GC_FLAT: Assert(pDbgc->pVM); pResult->enmType = DBGCVAR_TYPE_HC_PHYS; rc = PGMPhysGCPtr2HCPhys(pDbgc->pVM, pArg->u.GCFlat, &pResult->u.HCPhys); if (VBOX_SUCCESS(rc)) return 0; /** @todo more memory types. */ return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_GC_FAR: { Assert(pDbgc->pVM); DBGFADDRESS Address; rc = DBGFR3AddrFromSelOff(pDbgc->pVM, &Address, pArg->u.GCFar.sel, pArg->u.GCFar.off); if (VBOX_SUCCESS(rc)) { pResult->enmType = DBGCVAR_TYPE_HC_PHYS; rc = PGMPhysGCPtr2HCPhys(pDbgc->pVM, Address.FlatPtr, &pResult->u.HCPhys); if (VBOX_SUCCESS(rc)) return 0; /** @todo more memory types. */ } return VERR_PARSE_CONVERSION_FAILED; } case DBGCVAR_TYPE_GC_PHYS: Assert(pDbgc->pVM); pResult->enmType = DBGCVAR_TYPE_HC_PHYS; rc = PGMPhysGCPhys2HCPhys(pDbgc->pVM, pArg->u.GCFlat, &pResult->u.HCPhys); if (VBOX_SUCCESS(rc)) return 0; return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_HC_FLAT: Assert(pDbgc->pVM); pResult->enmType = DBGCVAR_TYPE_HC_PHYS; rc = PGMR3DbgHCPtr2HCPhys(pDbgc->pVM, pArg->u.pvHCFlat, &pResult->u.HCPhys); if (VBOX_SUCCESS(rc)) return 0; /** @todo more memory types! */ return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_HC_FAR: return VERR_PARSE_INCORRECT_ARG_TYPE; case DBGCVAR_TYPE_HC_PHYS: return 0; case DBGCVAR_TYPE_NUMBER: pResult->enmType = DBGCVAR_TYPE_HC_PHYS; pResult->u.HCPhys = (RTGCPHYS)pResult->u.u64Number; return 0; case DBGCVAR_TYPE_STRING: return dbgcSymbolGet(pDbgc, pArg->u.pszString, DBGCVAR_TYPE_HC_PHYS, pResult); case DBGCVAR_TYPE_UNKNOWN: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } return 0; } /** * Host address (unary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpAddrHost(PDBGC pDbgc, PCDBGCVAR pArg, PDBGCVAR pResult) { // LogFlow(("dbgcOpAddrHost\n")); int rc; *pResult = *pArg; switch (pArg->enmType) { case DBGCVAR_TYPE_GC_FLAT: Assert(pDbgc->pVM); pResult->enmType = DBGCVAR_TYPE_HC_FLAT; rc = PGMPhysGCPtr2HCPtr(pDbgc->pVM, pArg->u.GCFlat, &pResult->u.pvHCFlat); if (VBOX_SUCCESS(rc)) return 0; /** @todo more memory types. */ return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_GC_FAR: { Assert(pDbgc->pVM); DBGFADDRESS Address; rc = DBGFR3AddrFromSelOff(pDbgc->pVM, &Address, pArg->u.GCFar.sel, pArg->u.GCFar.off); if (VBOX_SUCCESS(rc)) { pResult->enmType = DBGCVAR_TYPE_HC_FLAT; rc = PGMPhysGCPtr2HCPtr(pDbgc->pVM, Address.FlatPtr, &pResult->u.pvHCFlat); if (VBOX_SUCCESS(rc)) return 0; /** @todo more memory types. */ } return VERR_PARSE_CONVERSION_FAILED; } case DBGCVAR_TYPE_GC_PHYS: Assert(pDbgc->pVM); pResult->enmType = DBGCVAR_TYPE_HC_FLAT; rc = PGMPhysGCPhys2HCPtr(pDbgc->pVM, pArg->u.GCPhys, 1, &pResult->u.pvHCFlat); if (VBOX_SUCCESS(rc)) return 0; return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_HC_FLAT: return 0; case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: /** @todo !*/ return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_NUMBER: pResult->enmType = DBGCVAR_TYPE_HC_FLAT; pResult->u.pvHCFlat = (void *)(uintptr_t)pResult->u.u64Number; return 0; case DBGCVAR_TYPE_STRING: return dbgcSymbolGet(pDbgc, pArg->u.pszString, DBGCVAR_TYPE_HC_FLAT, pResult); case DBGCVAR_TYPE_UNKNOWN: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } } /** * Bitwise not (unary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg The argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpAddrFar(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { // LogFlow(("dbgcOpAddrFar\n")); int rc; switch (pArg1->enmType) { case DBGCVAR_TYPE_STRING: rc = dbgcSymbolGet(pDbgc, pArg1->u.pszString, DBGCVAR_TYPE_NUMBER, pResult); if (VBOX_FAILURE(rc)) return rc; break; case DBGCVAR_TYPE_NUMBER: *pResult = *pArg1; break; case DBGCVAR_TYPE_GC_FLAT: case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: case DBGCVAR_TYPE_UNKNOWN: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } pResult->u.GCFar.sel = (RTSEL)pResult->u.u64Number; /* common code for the two types we support. */ switch (pArg2->enmType) { case DBGCVAR_TYPE_GC_FLAT: pResult->u.GCFar.off = pArg2->u.GCFlat; pResult->enmType = DBGCVAR_TYPE_GC_FAR; break; case DBGCVAR_TYPE_HC_FLAT: pResult->u.HCFar.off = pArg2->u.GCFlat; pResult->enmType = DBGCVAR_TYPE_GC_FAR; break; case DBGCVAR_TYPE_NUMBER: pResult->u.GCFar.off = (RTGCPTR)pArg2->u.u64Number; pResult->enmType = DBGCVAR_TYPE_GC_FAR; break; case DBGCVAR_TYPE_STRING: { DBGCVAR Var; rc = dbgcSymbolGet(pDbgc, pArg2->u.pszString, DBGCVAR_TYPE_NUMBER, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.GCFar.off = (RTGCPTR)Var.u.u64Number; pResult->enmType = DBGCVAR_TYPE_GC_FAR; break; } case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: case DBGCVAR_TYPE_UNKNOWN: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } return 0; } /** * Multiplication operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpMult(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { // LogFlow(("dbgcOpMult\n")); int rc; /* * Switch the factors so we preserve pointers, far pointers are considered more * important that physical and flat pointers. */ if ( DBGCVAR_ISPOINTER(pArg2->enmType) && ( !DBGCVAR_ISPOINTER(pArg1->enmType) || ( DBGCVAR_IS_FAR_PTR(pArg2->enmType) && !DBGCVAR_IS_FAR_PTR(pArg1->enmType)))) { PCDBGCVAR pTmp = pArg1; pArg2 = pArg1; pArg1 = pTmp; } /* * Convert the 2nd number into a number we use multiply the first with. */ DBGCVAR Factor2 = *pArg2; if ( Factor2.enmType == DBGCVAR_TYPE_STRING || Factor2.enmType == DBGCVAR_TYPE_SYMBOL) { rc = dbgcSymbolGet(pDbgc, pArg2->u.pszString, DBGCVAR_TYPE_NUMBER, &Factor2); if (VBOX_FAILURE(rc)) return rc; } uint64_t u64Factor; switch (Factor2.enmType) { case DBGCVAR_TYPE_GC_FLAT: u64Factor = Factor2.u.GCFlat; break; case DBGCVAR_TYPE_GC_FAR: u64Factor = Factor2.u.GCFar.off; break; case DBGCVAR_TYPE_GC_PHYS: u64Factor = Factor2.u.GCPhys; break; case DBGCVAR_TYPE_HC_FLAT: u64Factor = (uintptr_t)Factor2.u.pvHCFlat; break; case DBGCVAR_TYPE_HC_FAR: u64Factor = Factor2.u.HCFar.off; break; case DBGCVAR_TYPE_HC_PHYS: u64Factor = Factor2.u.HCPhys; break; case DBGCVAR_TYPE_NUMBER: u64Factor = Factor2.u.u64Number; break; default: return VERR_PARSE_INCORRECT_ARG_TYPE; } /* * Fix symbols in the 1st factor. */ *pResult = *pArg1; if ( pResult->enmType == DBGCVAR_TYPE_STRING || pResult->enmType == DBGCVAR_TYPE_SYMBOL) { rc = dbgcSymbolGet(pDbgc, pArg1->u.pszString, DBGCVAR_TYPE_ANY, pResult); if (VBOX_FAILURE(rc)) return rc; } /* * Do the multiplication. */ switch (pArg1->enmType) { case DBGCVAR_TYPE_GC_FLAT: pResult->u.GCFlat *= u64Factor; break; case DBGCVAR_TYPE_GC_FAR: pResult->u.GCFar.off *= u64Factor; break; case DBGCVAR_TYPE_GC_PHYS: pResult->u.GCPhys *= u64Factor; break; case DBGCVAR_TYPE_HC_FLAT: pResult->u.pvHCFlat = (void *)(uintptr_t)((uintptr_t)pResult->u.pvHCFlat * u64Factor); break; case DBGCVAR_TYPE_HC_FAR: pResult->u.HCFar.off *= u64Factor; break; case DBGCVAR_TYPE_HC_PHYS: pResult->u.HCPhys *= u64Factor; break; case DBGCVAR_TYPE_NUMBER: pResult->u.u64Number *= u64Factor; break; default: return VERR_PARSE_INCORRECT_ARG_TYPE; } return 0; } /** * Division operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpDiv(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { LogFlow(("dbgcOpDiv\n")); NOREF(pDbgc); NOREF(pArg1); NOREF(pArg2); NOREF(pResult); return -1; } /** * Modulus operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpMod(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { LogFlow(("dbgcOpMod\n")); NOREF(pDbgc); NOREF(pArg1); NOREF(pArg2); NOREF(pResult); return -1; } /** * Addition operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpAdd(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { // LogFlow(("dbgcOpAdd\n")); /* * An addition operation will return (when possible) the left side type in the * expression. We make an omission for numbers, where we'll take the right side * type instead. An expression where only the left hand side is a string we'll * use the right hand type assuming that the string is a symbol. */ if ( (pArg1->enmType == DBGCVAR_TYPE_NUMBER && pArg2->enmType != DBGCVAR_TYPE_STRING) || (pArg1->enmType == DBGCVAR_TYPE_STRING && pArg2->enmType != DBGCVAR_TYPE_STRING)) { PCDBGCVAR pTmp = pArg2; pArg2 = pArg1; pArg1 = pTmp; } DBGCVAR Sym1, Sym2; if (pArg1->enmType == DBGCVAR_TYPE_STRING) { int rc = dbgcSymbolGet(pDbgc, pArg1->u.pszString, DBGCVAR_TYPE_ANY, &Sym1); if (VBOX_FAILURE(rc)) return rc; pArg1 = &Sym1; rc = dbgcSymbolGet(pDbgc, pArg2->u.pszString, DBGCVAR_TYPE_ANY, &Sym2); if (VBOX_FAILURE(rc)) return rc; pArg2 = &Sym2; } int rc; DBGCVAR Var; DBGCVAR Var2; switch (pArg1->enmType) { /* * GC Flat */ case DBGCVAR_TYPE_GC_FLAT: switch (pArg2->enmType) { case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: return VERR_PARSE_INVALID_OPERATION; default: *pResult = *pArg1; rc = dbgcOpAddrFlat(pDbgc, pArg2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.GCFlat += pArg2->u.GCFlat; break; } break; /* * GC Far */ case DBGCVAR_TYPE_GC_FAR: switch (pArg2->enmType) { case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: return VERR_PARSE_INVALID_OPERATION; case DBGCVAR_TYPE_NUMBER: *pResult = *pArg1; pResult->u.GCFar.off += (RTGCPTR)pArg2->u.u64Number; break; default: rc = dbgcOpAddrFlat(pDbgc, pArg1, pResult); if (VBOX_FAILURE(rc)) return rc; rc = dbgcOpAddrFlat(pDbgc, pArg2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.GCFlat += pArg2->u.GCFlat; break; } break; /* * GC Phys */ case DBGCVAR_TYPE_GC_PHYS: switch (pArg2->enmType) { case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: return VERR_PARSE_INVALID_OPERATION; default: *pResult = *pArg1; rc = dbgcOpAddrPhys(pDbgc, pArg2, &Var); if (VBOX_FAILURE(rc)) return rc; if (Var.enmType != DBGCVAR_TYPE_GC_PHYS) return VERR_PARSE_INVALID_OPERATION; pResult->u.GCPhys += Var.u.GCPhys; break; } break; /* * HC Flat */ case DBGCVAR_TYPE_HC_FLAT: *pResult = *pArg1; rc = dbgcOpAddrHost(pDbgc, pArg2, &Var2); if (VBOX_FAILURE(rc)) return rc; rc = dbgcOpAddrFlat(pDbgc, &Var2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.pvHCFlat = (char *)pResult->u.pvHCFlat + (uintptr_t)Var.u.pvHCFlat; break; /* * HC Far */ case DBGCVAR_TYPE_HC_FAR: switch (pArg2->enmType) { case DBGCVAR_TYPE_NUMBER: *pResult = *pArg1; pResult->u.HCFar.off += (uintptr_t)pArg2->u.u64Number; break; default: rc = dbgcOpAddrFlat(pDbgc, pArg1, pResult); if (VBOX_FAILURE(rc)) return rc; rc = dbgcOpAddrHost(pDbgc, pArg2, &Var2); if (VBOX_FAILURE(rc)) return rc; rc = dbgcOpAddrFlat(pDbgc, &Var2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.pvHCFlat = (char *)pResult->u.pvHCFlat + (uintptr_t)Var.u.pvHCFlat; break; } break; /* * HC Phys */ case DBGCVAR_TYPE_HC_PHYS: *pResult = *pArg1; rc = dbgcOpAddrHostPhys(pDbgc, pArg2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.HCPhys += Var.u.HCPhys; break; /* * Numbers (see start of function) */ case DBGCVAR_TYPE_NUMBER: *pResult = *pArg1; switch (pArg2->enmType) { case DBGCVAR_TYPE_SYMBOL: case DBGCVAR_TYPE_STRING: rc = dbgcSymbolGet(pDbgc, pArg2->u.pszString, DBGCVAR_TYPE_NUMBER, &Var); if (VBOX_FAILURE(rc)) return rc; case DBGCVAR_TYPE_NUMBER: pResult->u.u64Number += pArg2->u.u64Number; break; default: return VERR_PARSE_INVALID_OPERATION; } break; default: return VERR_PARSE_INVALID_OPERATION; } return 0; } /** * Subtration operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpSub(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { // LogFlow(("dbgcOpSub\n")); /* * An subtraction operation will return the left side type in the expression. * However, if the left hand side is a number and the right hand a pointer of * some kind we'll convert the left hand side to the same type as the right hand. * Any strings will be attempted resolved as symbols. */ DBGCVAR Sym1, Sym2; if ( pArg2->enmType == DBGCVAR_TYPE_STRING && ( pArg1->enmType == DBGCVAR_TYPE_NUMBER || pArg1->enmType == DBGCVAR_TYPE_STRING)) { int rc = dbgcSymbolGet(pDbgc, pArg2->u.pszString, DBGCVAR_TYPE_ANY, &Sym2); if (VBOX_FAILURE(rc)) return rc; pArg2 = &Sym2; } if (pArg1->enmType == DBGCVAR_TYPE_STRING) { DBGCVARTYPE enmType; switch (pArg2->enmType) { case DBGCVAR_TYPE_NUMBER: enmType = DBGCVAR_TYPE_ANY; break; case DBGCVAR_TYPE_GC_FLAT: case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_PHYS: enmType = pArg2->enmType; break; case DBGCVAR_TYPE_GC_FAR: enmType = DBGCVAR_TYPE_GC_FLAT; break; case DBGCVAR_TYPE_HC_FAR: enmType = DBGCVAR_TYPE_HC_FLAT; break; default: case DBGCVAR_TYPE_STRING: AssertMsgFailed(("Can't happen\n")); enmType = DBGCVAR_TYPE_STRING; break; } if (enmType != DBGCVAR_TYPE_STRING) { int rc = dbgcSymbolGet(pDbgc, pArg1->u.pszString, DBGCVAR_TYPE_ANY, &Sym1); if (VBOX_FAILURE(rc)) return rc; pArg1 = &Sym1; } } else if (pArg1->enmType == DBGCVAR_TYPE_NUMBER) { PFNDBGCOPUNARY pOp = NULL; switch (pArg2->enmType) { case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_GC_FLAT: pOp = dbgcOpAddrFlat; break; case DBGCVAR_TYPE_GC_PHYS: pOp = dbgcOpAddrPhys; break; case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_FLAT: pOp = dbgcOpAddrHost; break; case DBGCVAR_TYPE_HC_PHYS: pOp = dbgcOpAddrHostPhys; break; case DBGCVAR_TYPE_NUMBER: break; default: case DBGCVAR_TYPE_STRING: AssertMsgFailed(("Can't happen\n")); break; } if (pOp) { int rc = pOp(pDbgc, pArg1, &Sym1); if (VBOX_FAILURE(rc)) return rc; pArg1 = &Sym1; } } /* * Normal processing. */ int rc; DBGCVAR Var; DBGCVAR Var2; switch (pArg1->enmType) { /* * GC Flat */ case DBGCVAR_TYPE_GC_FLAT: switch (pArg2->enmType) { case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: return VERR_PARSE_INVALID_OPERATION; default: *pResult = *pArg1; rc = dbgcOpAddrFlat(pDbgc, pArg2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.GCFlat -= pArg2->u.GCFlat; break; } break; /* * GC Far */ case DBGCVAR_TYPE_GC_FAR: switch (pArg2->enmType) { case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: return VERR_PARSE_INVALID_OPERATION; case DBGCVAR_TYPE_NUMBER: *pResult = *pArg1; pResult->u.GCFar.off -= (RTGCPTR)pArg2->u.u64Number; break; default: rc = dbgcOpAddrFlat(pDbgc, pArg1, pResult); if (VBOX_FAILURE(rc)) return rc; rc = dbgcOpAddrFlat(pDbgc, pArg2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.GCFlat -= pArg2->u.GCFlat; break; } break; /* * GC Phys */ case DBGCVAR_TYPE_GC_PHYS: switch (pArg2->enmType) { case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: return VERR_PARSE_INVALID_OPERATION; default: *pResult = *pArg1; rc = dbgcOpAddrPhys(pDbgc, pArg2, &Var); if (VBOX_FAILURE(rc)) return rc; if (Var.enmType != DBGCVAR_TYPE_GC_PHYS) return VERR_PARSE_INVALID_OPERATION; pResult->u.GCPhys -= Var.u.GCPhys; break; } break; /* * HC Flat */ case DBGCVAR_TYPE_HC_FLAT: *pResult = *pArg1; rc = dbgcOpAddrHost(pDbgc, pArg2, &Var2); if (VBOX_FAILURE(rc)) return rc; rc = dbgcOpAddrFlat(pDbgc, &Var2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.pvHCFlat = (char *)pResult->u.pvHCFlat - (uintptr_t)Var.u.pvHCFlat; break; /* * HC Far */ case DBGCVAR_TYPE_HC_FAR: switch (pArg2->enmType) { case DBGCVAR_TYPE_NUMBER: *pResult = *pArg1; pResult->u.HCFar.off -= (uintptr_t)pArg2->u.u64Number; break; default: rc = dbgcOpAddrFlat(pDbgc, pArg1, pResult); if (VBOX_FAILURE(rc)) return rc; rc = dbgcOpAddrHost(pDbgc, pArg2, &Var2); if (VBOX_FAILURE(rc)) return rc; rc = dbgcOpAddrFlat(pDbgc, &Var2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.pvHCFlat = (char *)pResult->u.pvHCFlat - (uintptr_t)Var.u.pvHCFlat; break; } break; /* * HC Phys */ case DBGCVAR_TYPE_HC_PHYS: *pResult = *pArg1; rc = dbgcOpAddrHostPhys(pDbgc, pArg2, &Var); if (VBOX_FAILURE(rc)) return rc; pResult->u.HCPhys -= Var.u.HCPhys; break; /* * Numbers (see start of function) */ case DBGCVAR_TYPE_NUMBER: *pResult = *pArg1; switch (pArg2->enmType) { case DBGCVAR_TYPE_SYMBOL: case DBGCVAR_TYPE_STRING: rc = dbgcSymbolGet(pDbgc, pArg2->u.pszString, DBGCVAR_TYPE_NUMBER, &Var); if (VBOX_FAILURE(rc)) return rc; case DBGCVAR_TYPE_NUMBER: pResult->u.u64Number -= pArg2->u.u64Number; break; default: return VERR_PARSE_INVALID_OPERATION; } break; default: return VERR_PARSE_INVALID_OPERATION; } return 0; } /** * Bitwise shift left operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpBitwiseShiftLeft(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { LogFlow(("dbgcOpBitwiseShiftLeft\n")); NOREF(pDbgc); NOREF(pArg1); NOREF(pArg2); NOREF(pResult); return -1; } /** * Bitwise shift right operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpBitwiseShiftRight(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { LogFlow(("dbgcOpBitwiseShiftRight\n")); NOREF(pDbgc); NOREF(pArg1); NOREF(pArg2); NOREF(pResult); return -1; } /** * Bitwise and operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpBitwiseAnd(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { LogFlow(("dbgcOpBitwiseAnd\n")); NOREF(pDbgc); NOREF(pArg1); NOREF(pArg2); NOREF(pResult); return -1; } /** * Bitwise exclusive or operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpBitwiseXor(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { LogFlow(("dbgcOpBitwiseXor\n")); NOREF(pDbgc); NOREF(pArg1); NOREF(pArg2); NOREF(pResult); return -1; } /** * Bitwise inclusive or operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpBitwiseOr(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { LogFlow(("dbgcOpBitwiseOr\n")); NOREF(pDbgc); NOREF(pArg1); NOREF(pArg2); NOREF(pResult); return -1; } /** * Boolean and operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpBooleanAnd(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { LogFlow(("dbgcOpBooleanAnd\n")); NOREF(pDbgc); NOREF(pArg1); NOREF(pArg2); NOREF(pResult); return -1; } /** * Boolean or operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpBooleanOr(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { LogFlow(("dbgcOpBooleanOr\n")); NOREF(pDbgc); NOREF(pArg1); NOREF(pArg2); NOREF(pResult); return -1; } /** * Range to operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpRangeLength(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { // LogFlow(("dbgcOpRangeLength\n")); /* * Make result. Strings needs to be resolved into symbols. */ if (pArg1->enmType == DBGCVAR_TYPE_STRING) { int rc = dbgcSymbolGet(pDbgc, pArg1->u.pszString, DBGCVAR_TYPE_ANY, pResult); if (VBOX_FAILURE(rc)) return rc; } else *pResult = *pArg1; /* * Convert 2nd argument to element count. */ pResult->enmRangeType = DBGCVAR_RANGE_ELEMENTS; switch (pArg2->enmType) { case DBGCVAR_TYPE_NUMBER: pResult->u64Range = pArg2->u.u64Number; break; case DBGCVAR_TYPE_STRING: { int rc = dbgcSymbolGet(pDbgc, pArg1->u.pszString, DBGCVAR_TYPE_NUMBER, pResult); if (VBOX_FAILURE(rc)) return rc; pResult->u64Range = pArg2->u.u64Number; break; } default: return VERR_PARSE_INVALID_OPERATION; } return VINF_SUCCESS; } /** * Range to operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpRangeLengthBytes(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { // LogFlow(("dbgcOpRangeLengthBytes\n")); int rc = dbgcOpRangeLength(pDbgc, pArg1, pArg2, pResult); if (VBOX_SUCCESS(rc)) pResult->enmRangeType = DBGCVAR_RANGE_BYTES; return rc; } /** * Range to operator (binary). * * @returns 0 on success. * @returns VBox evaluation / parsing error code on failure. * The caller does the bitching. * @param pDbgc Debugger console instance data. * @param pArg1 The first argument. * @param pArg2 The 2nd argument. * @param pResult Where to store the result. */ static DECLCALLBACK(int) dbgcOpRangeTo(PDBGC pDbgc, PCDBGCVAR pArg1, PCDBGCVAR pArg2, PDBGCVAR pResult) { // LogFlow(("dbgcOpRangeTo\n")); /* * Calc number of bytes between the two args. */ DBGCVAR Diff; int rc = dbgcOpSub(pDbgc, pArg2, pArg1, &Diff); if (VBOX_FAILURE(rc)) return rc; /* * Use the diff as the range of Arg1. */ *pResult = *pArg1; pResult->enmRangeType = DBGCVAR_RANGE_BYTES; switch (Diff.enmType) { case DBGCVAR_TYPE_GC_FLAT: pResult->u64Range = (RTGCUINTPTR)Diff.u.GCFlat; break; case DBGCVAR_TYPE_GC_PHYS: pResult->u64Range = Diff.u.GCPhys; break; case DBGCVAR_TYPE_HC_FLAT: pResult->u64Range = (uintptr_t)Diff.u.pvHCFlat; break; case DBGCVAR_TYPE_HC_PHYS: pResult->u64Range = Diff.u.HCPhys; break; case DBGCVAR_TYPE_NUMBER: pResult->u64Range = Diff.u.u64Number; break; case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_STRING: case DBGCVAR_TYPE_HC_FAR: default: AssertMsgFailed(("Impossible!\n")); return VERR_PARSE_INVALID_OPERATION; } return 0; } /** * Output callback. * * @returns number of bytes written. * @param pvArg User argument. * @param pachChars Pointer to an array of utf-8 characters. * @param cbChars Number of bytes in the character array pointed to by pachChars. */ static DECLCALLBACK(size_t) dbgcFormatOutput(void *pvArg, const char *pachChars, size_t cbChars) { PDBGC pDbgc = (PDBGC)pvArg; if (cbChars) { int rc = pDbgc->pBack->pfnWrite(pDbgc->pBack, pachChars, cbChars, NULL); if (VBOX_FAILURE(rc)) { pDbgc->rcOutput = rc; cbChars = 0; } } return cbChars; } //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// // // // C a l l b a c k H e l p e r s // // //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// /** * Command helper for writing text to the debug console. * * @returns VBox status. * @param pCmdHlp Pointer to the command callback structure. * @param pvBuf What to write. * @param cbBuf Number of bytes to write. * @param pcbWritten Where to store the number of bytes actually written. * If NULL the entire buffer must be successfully written. */ static DECLCALLBACK(int) dbgcHlpWrite(PDBGCCMDHLP pCmdHlp, const void *pvBuf, size_t cbBuf, size_t *pcbWritten) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); return pDbgc->pBack->pfnWrite(pDbgc->pBack, pvBuf, cbBuf, pcbWritten); } /** * Command helper for writing formatted text to the debug console. * * @returns VBox status. * @param pCmdHlp Pointer to the command callback structure. * @param pcb Where to store the number of bytes written. * @param pszFormat The format string. * This is using the log formatter, so it's format extensions can be used. * @param ... Arguments specified in the format string. */ static DECLCALLBACK(int) dbgcHlpPrintf(PDBGCCMDHLP pCmdHlp, size_t *pcbWritten, const char *pszFormat, ...) { /* * Do the formatting and output. */ va_list args; va_start(args, pszFormat); int rc = pCmdHlp->pfnPrintfV(pCmdHlp, pcbWritten, pszFormat, args); va_end(args); return rc; } /** * Callback to format non-standard format specifiers. * * @returns The number of bytes formatted. * @param pvArg Formatter argument. * @param pfnOutput Pointer to output function. * @param pvArgOutput Argument for the output function. * @param ppszFormat Pointer to the format string pointer. Advance this till the char * after the format specifier. * @param pArgs Pointer to the argument list. Use this to fetch the arguments. * @param cchWidth Format Width. -1 if not specified. * @param cchPrecision Format Precision. -1 if not specified. * @param fFlags Flags (RTSTR_NTFS_*). * @param chArgSize The argument size specifier, 'l' or 'L'. */ static DECLCALLBACK(int) dbgcStringFormatter(void *pvArg, PFNRTSTROUTPUT pfnOutput, void *pvArgOutput, const char **ppszFormat, va_list *pArgs, int cchWidth, int cchPrecision, unsigned fFlags, char chArgSize) { NOREF(cchWidth); NOREF(cchPrecision); NOREF(fFlags); NOREF(chArgSize); NOREF(pvArg); if (**ppszFormat != 'D') { (*ppszFormat)++; return 0; } (*ppszFormat)++; switch (**ppszFormat) { /* * Print variable without range. * The argument is a const pointer to the variable. */ case 'V': { (*ppszFormat)++; PCDBGCVAR pVar = va_arg(*pArgs, PCDBGCVAR); switch (pVar->enmType) { case DBGCVAR_TYPE_GC_FLAT: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%%%VGv", pVar->u.GCFlat); case DBGCVAR_TYPE_GC_FAR: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%04x:%08x", pVar->u.GCFar.sel, pVar->u.GCFar.off); case DBGCVAR_TYPE_GC_PHYS: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%%%%%VGp", pVar->u.GCPhys); case DBGCVAR_TYPE_HC_FLAT: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%%#%VHv", (uintptr_t)pVar->u.pvHCFlat); case DBGCVAR_TYPE_HC_FAR: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "#%04x:%08x", pVar->u.HCFar.sel, pVar->u.HCFar.off); case DBGCVAR_TYPE_HC_PHYS: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "#%%%%%VHp", pVar->u.HCPhys); case DBGCVAR_TYPE_STRING: return pfnOutput(pvArgOutput, pVar->u.pszString, (size_t)pVar->u64Range); case DBGCVAR_TYPE_NUMBER: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%llx", pVar->u.u64Number); case DBGCVAR_TYPE_UNKNOWN: default: return pfnOutput(pvArgOutput, "??", 2); } } /* * Print variable with range. * The argument is a const pointer to the variable. */ case 'v': { (*ppszFormat)++; PCDBGCVAR pVar = va_arg(*pArgs, PCDBGCVAR); char szRange[32]; switch (pVar->enmRangeType) { case DBGCVAR_RANGE_NONE: szRange[0] = '\0'; break; case DBGCVAR_RANGE_ELEMENTS: RTStrPrintf(szRange, sizeof(szRange), " L %llx", pVar->u64Range); break; case DBGCVAR_RANGE_BYTES: RTStrPrintf(szRange, sizeof(szRange), " LB %llx", pVar->u64Range); break; } switch (pVar->enmType) { case DBGCVAR_TYPE_GC_FLAT: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%%%VGv%s", pVar->u.GCFlat, szRange); case DBGCVAR_TYPE_GC_FAR: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%04x:%08x%s", pVar->u.GCFar.sel, pVar->u.GCFar.off, szRange); case DBGCVAR_TYPE_GC_PHYS: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%%%%%VGp%s", pVar->u.GCPhys, szRange); case DBGCVAR_TYPE_HC_FLAT: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%%#%VHv%s", (uintptr_t)pVar->u.pvHCFlat, szRange); case DBGCVAR_TYPE_HC_FAR: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "#%04x:%08x%s", pVar->u.HCFar.sel, pVar->u.HCFar.off, szRange); case DBGCVAR_TYPE_HC_PHYS: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "#%%%%%VHp%s", pVar->u.HCPhys, szRange); case DBGCVAR_TYPE_STRING: return pfnOutput(pvArgOutput, pVar->u.pszString, (size_t)pVar->u64Range); case DBGCVAR_TYPE_NUMBER: return RTStrFormat(pfnOutput, pvArgOutput, NULL, 0, "%llx%s", pVar->u.u64Number, szRange); case DBGCVAR_TYPE_UNKNOWN: default: return pfnOutput(pvArgOutput, "??", 2); } } default: AssertMsgFailed(("Invalid format type '%s'!\n", **ppszFormat)); return 0; } } /** * Command helper for writing formatted text to the debug console. * * @returns VBox status. * @param pCmdHlp Pointer to the command callback structure. * @param pcb Where to store the number of bytes written. * @param pszFormat The format string. * This is using the log formatter, so it's format extensions can be used. * @param args Arguments specified in the format string. */ static DECLCALLBACK(int) dbgcHlpPrintfV(PDBGCCMDHLP pCmdHlp, size_t *pcbWritten, const char *pszFormat, va_list args) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Do the formatting and output. */ pDbgc->rcOutput = 0; size_t cb = RTStrFormatV(dbgcFormatOutput, pDbgc, dbgcStringFormatter, pDbgc, pszFormat, args); if (pcbWritten) *pcbWritten = cb; return pDbgc->rcOutput; } /** * Reports an error from a DBGF call. * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to command helpers. * @param rc The VBox status code returned by a DBGF call. * @param pszFormat Format string for additional messages. Can be NULL. * @param ... Format arguments, optional. */ static DECLCALLBACK(int) dbgcHlpVBoxErrorV(PDBGCCMDHLP pCmdHlp, int rc, const char *pszFormat, va_list args) { switch (rc) { case VINF_SUCCESS: break; default: rc = pCmdHlp->pfnPrintf(pCmdHlp, NULL, "error: %Vrc: %s", rc, pszFormat ? " " : "\n"); if (VBOX_SUCCESS(rc) && pszFormat) rc = pCmdHlp->pfnPrintfV(pCmdHlp, NULL, pszFormat, args); break; } return rc; } /** * Reports an error from a DBGF call. * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to command helpers. * @param rc The VBox status code returned by a DBGF call. * @param pszFormat Format string for additional messages. Can be NULL. * @param ... Format arguments, optional. */ static DECLCALLBACK(int) dbgcHlpVBoxError(PDBGCCMDHLP pCmdHlp, int rc, const char *pszFormat, ...) { va_list args; va_start(args, pszFormat); int rcRet = pCmdHlp->pfnVBoxErrorV(pCmdHlp, rc, pszFormat, args); va_end(args); return rcRet; } /** * Command helper for reading memory specified by a DBGC variable. * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param pVM VM handle if GC or physical HC address. * @param pvBuffer Where to store the read data. * @param cbRead Number of bytes to read. * @param pVarPointer DBGC variable specifying where to start reading. * @param pcbRead Where to store the number of bytes actually read. * This optional, but it's useful when read GC virtual memory where a * page in the requested range might not be present. * If not specified not-present failure or end of a HC physical page * will cause failure. */ static DECLCALLBACK(int) dbgcHlpMemRead(PDBGCCMDHLP pCmdHlp, PVM pVM, void *pvBuffer, size_t cbRead, PCDBGCVAR pVarPointer, size_t *pcbRead) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Dummy check. */ if (cbRead == 0) { if (*pcbRead) *pcbRead = 0; return VINF_SUCCESS; } /* * Convert Far addresses getting size and the correct base address. * Getting and checking the size is what makes this messy and slow. */ DBGCVAR Var = *pVarPointer; switch (pVarPointer->enmType) { case DBGCVAR_TYPE_GC_FAR: { /* Use DBGFR3AddrFromSelOff for the conversion. */ Assert(pDbgc->pVM); DBGFADDRESS Address; int rc = DBGFR3AddrFromSelOff(pDbgc->pVM, &Address, Var.u.GCFar.sel, Var.u.GCFar.off); if (VBOX_FAILURE(rc)) return rc; /* don't bother with flat selectors (for now). */ if (!DBGFADDRESS_IS_FLAT(&Address)) { SELMSELINFO SelInfo; rc = SELMR3GetSelectorInfo(pDbgc->pVM, Address.Sel, &SelInfo); if (VBOX_SUCCESS(rc)) { RTGCUINTPTR cb; /* -1 byte */ if (SELMSelInfoIsExpandDown(&SelInfo)) { if ( !SelInfo.Raw.Gen.u1Granularity && Address.off > UINT16_C(0xffff)) return VERR_OUT_OF_SELECTOR_BOUNDS; if (Address.off <= SelInfo.cbLimit) return VERR_OUT_OF_SELECTOR_BOUNDS; cb = (SelInfo.Raw.Gen.u1Granularity ? UINT32_C(0xffffffff) : UINT32_C(0xffff)) - Address.off; } else { if (Address.off > SelInfo.cbLimit) return VERR_OUT_OF_SELECTOR_BOUNDS; cb = SelInfo.cbLimit - Address.off; } if (cbRead - 1 > cb) { if (!pcbRead) return VERR_OUT_OF_SELECTOR_BOUNDS; cbRead = cb + 1; } } Var.enmType = DBGCVAR_TYPE_GC_FLAT; Var.u.GCFlat = Address.FlatPtr; } break; } case DBGCVAR_TYPE_GC_FLAT: case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_PHYS: break; case DBGCVAR_TYPE_HC_FAR: /* not supported yet! */ default: return VERR_NOT_IMPLEMENTED; } /* * Copy page by page. */ size_t cbLeft = cbRead; for (;;) { /* * Calc read size. */ size_t cb = RT_MIN(PAGE_SIZE, cbLeft); switch (pVarPointer->enmType) { case DBGCVAR_TYPE_GC_FLAT: cb = RT_MIN(cb, PAGE_SIZE - (Var.u.GCFlat & PAGE_OFFSET_MASK)); break; case DBGCVAR_TYPE_GC_PHYS: cb = RT_MIN(cb, PAGE_SIZE - (Var.u.GCPhys & PAGE_OFFSET_MASK)); break; case DBGCVAR_TYPE_HC_FLAT: cb = RT_MIN(cb, PAGE_SIZE - ((uintptr_t)Var.u.pvHCFlat & PAGE_OFFSET_MASK)); break; case DBGCVAR_TYPE_HC_PHYS: cb = RT_MIN(cb, PAGE_SIZE - ((size_t)Var.u.HCPhys & PAGE_OFFSET_MASK)); break; /* size_t: MSC has braindead loss of data warnings! */ default: break; } /* * Perform read. */ int rc; switch (Var.enmType) { case DBGCVAR_TYPE_GC_FLAT: rc = MMR3ReadGCVirt(pVM, pvBuffer, Var.u.GCFlat, cb); break; case DBGCVAR_TYPE_GC_PHYS: rc = PGMPhysReadGCPhys(pVM, pvBuffer, Var.u.GCPhys, cb); break; case DBGCVAR_TYPE_HC_PHYS: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: { DBGCVAR Var2; rc = dbgcOpAddrFlat(pDbgc, &Var, &Var2); if (VBOX_SUCCESS(rc)) { /** @todo protect this!!! */ memcpy(pvBuffer, Var2.u.pvHCFlat, cb); rc = 0; } else rc = VERR_INVALID_POINTER; break; } default: rc = VERR_PARSE_INCORRECT_ARG_TYPE; } /* * Check for failure. */ if (VBOX_FAILURE(rc)) { if (pcbRead && (*pcbRead = cbRead - cbLeft) > 0) return VINF_SUCCESS; return rc; } /* * Next. */ cbLeft -= cb; if (!cbLeft) break; pvBuffer = (char *)pvBuffer + cb; rc = pCmdHlp->pfnEval(pCmdHlp, &Var, "%DV + %d", &Var, cb); if (VBOX_FAILURE(rc)) { if (pcbRead && (*pcbRead = cbRead - cbLeft) > 0) return VINF_SUCCESS; return rc; } } /* * Done */ if (pcbRead) *pcbRead = cbRead; return 0; } /** * Command helper for writing memory specified by a DBGC variable. * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param pVM VM handle if GC or physical HC address. * @param pvBuffer What to write. * @param cbWrite Number of bytes to write. * @param pVarPointer DBGC variable specifying where to start reading. * @param pcbWritten Where to store the number of bytes written. * This is optional. If NULL be aware that some of the buffer * might have been written to the specified address. */ static DECLCALLBACK(int) dbgcHlpMemWrite(PDBGCCMDHLP pCmdHlp, PVM pVM, const void *pvBuffer, size_t cbWrite, PCDBGCVAR pVarPointer, size_t *pcbWritten) { NOREF(pCmdHlp); NOREF(pVM); NOREF(pvBuffer); NOREF(cbWrite); NOREF(pVarPointer); NOREF(pcbWritten); return VERR_NOT_IMPLEMENTED; } /** * Evaluates an expression. * (Hopefully the parser and functions are fully reentrant.) * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param pResult Where to store the result. * @param pszExpr The expression. Format string with the format DBGC extensions. * @param ... Format arguments. */ static DECLCALLBACK(int) dbgcHlpEval(PDBGCCMDHLP pCmdHlp, PDBGCVAR pResult, const char *pszExpr, ...) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* * Format the expression. */ char szExprFormatted[2048]; va_list args; va_start(args, pszExpr); size_t cb = RTStrPrintfExV(dbgcStringFormatter, pDbgc, szExprFormatted, sizeof(szExprFormatted), pszExpr, args); va_end(args); /* ignore overflows. */ return dbgcEvalSub(pDbgc, &szExprFormatted[0], cb, pResult); } /** * Executes one command expression. * (Hopefully the parser and functions are fully reentrant.) * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param pszExpr The expression. Format string with the format DBGC extensions. * @param ... Format arguments. */ static DECLCALLBACK(int) dbgcHlpExec(PDBGCCMDHLP pCmdHlp, const char *pszExpr, ...) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); /* Save the scratch state. */ char *pszScratch = pDbgc->pszScratch; unsigned iArg = pDbgc->iArg; /* * Format the expression. */ va_list args; va_start(args, pszExpr); size_t cbScratch = sizeof(pDbgc->achScratch) - (pDbgc->pszScratch - &pDbgc->achScratch[0]); size_t cb = RTStrPrintfExV(dbgcStringFormatter, pDbgc, pDbgc->pszScratch, cbScratch, pszExpr, args); va_end(args); if (cb >= cbScratch) return VERR_BUFFER_OVERFLOW; /* * Execute the command. * We save and restore the arg index and scratch buffer pointer. */ pDbgc->pszScratch = pDbgc->pszScratch + cb + 1; int rc = dbgcProcessCommand(pDbgc, pszScratch, cb); /* Restore the scratch state. */ pDbgc->iArg = iArg; pDbgc->pszScratch = pszScratch; return rc; } /** * Converts a DBGC variable to a DBGF address structure. * * @returns VBox status code. * @param pCmdHlp Pointer to the command callback structure. * @param pVar The variable to convert. * @param pAddress The target address. */ static DECLCALLBACK(int) dbgcHlpVarToDbgfAddr(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, PDBGFADDRESS pAddress) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); return dbgcVarToDbgfAddr(pDbgc, pVar, pAddress); } /** * Converts a DBGC variable to a boolean. * * @returns VBox status code. * @param pCmdHlp Pointer to the command callback structure. * @param pVar The variable to convert. * @param pf Where to store the boolean. */ static DECLCALLBACK(int) dbgcHlpVarToBool(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, bool *pf) { PDBGC pDbgc = DBGC_CMDHLP2DBGC(pCmdHlp); NOREF(pDbgc); switch (pVar->enmType) { case DBGCVAR_TYPE_STRING: /** @todo add strcasecmp / stricmp wrappers to iprt/string.h. */ if ( !strcmp(pVar->u.pszString, "true") || !strcmp(pVar->u.pszString, "True") || !strcmp(pVar->u.pszString, "TRUE") || !strcmp(pVar->u.pszString, "on") || !strcmp(pVar->u.pszString, "On") || !strcmp(pVar->u.pszString, "oN") || !strcmp(pVar->u.pszString, "ON") || !strcmp(pVar->u.pszString, "enabled") || !strcmp(pVar->u.pszString, "Enabled") || !strcmp(pVar->u.pszString, "DISABLED")) { *pf = true; return VINF_SUCCESS; } if ( !strcmp(pVar->u.pszString, "false") || !strcmp(pVar->u.pszString, "False") || !strcmp(pVar->u.pszString, "FALSE") || !strcmp(pVar->u.pszString, "off") || !strcmp(pVar->u.pszString, "Off") || !strcmp(pVar->u.pszString, "OFF") || !strcmp(pVar->u.pszString, "disabled") || !strcmp(pVar->u.pszString, "Disabled") || !strcmp(pVar->u.pszString, "DISABLED")) { *pf = false; return VINF_SUCCESS; } return VERR_PARSE_INCORRECT_ARG_TYPE; /** @todo better error code! */ case DBGCVAR_TYPE_GC_FLAT: case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_PHYS: case DBGCVAR_TYPE_NUMBER: *pf = pVar->u.u64Number != 0; return VINF_SUCCESS; case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_SYMBOL: default: return VERR_PARSE_INCORRECT_ARG_TYPE; } } //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// // // // V a r i a b l e M a n i p u l a t i o n // // //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// /** @todo move me!*/ static void dbgcVarSetGCFlat(PDBGCVAR pVar, RTGCPTR GCFlat) { if (pVar) { pVar->enmType = DBGCVAR_TYPE_GC_FLAT; pVar->u.GCFlat = GCFlat; pVar->enmRangeType = DBGCVAR_RANGE_NONE; pVar->u64Range = 0; } } /** @todo move me!*/ static void dbgcVarSetGCFlatByteRange(PDBGCVAR pVar, RTGCPTR GCFlat, uint64_t cb) { if (pVar) { pVar->enmType = DBGCVAR_TYPE_GC_FLAT; pVar->u.GCFlat = GCFlat; pVar->enmRangeType = DBGCVAR_RANGE_BYTES; pVar->u64Range = cb; } } /** @todo move me!*/ static void dbgcVarSetVar(PDBGCVAR pVar, PCDBGCVAR pVar2) { if (pVar) { if (pVar2) *pVar = *pVar2; else { pVar->enmType = DBGCVAR_TYPE_UNKNOWN; memset(&pVar->u, 0, sizeof(pVar->u)); pVar->enmRangeType = DBGCVAR_RANGE_NONE; pVar->u64Range = 0; } } } /** @todo move me!*/ static void dbgcVarSetByteRange(PDBGCVAR pVar, uint64_t cb) { if (pVar) { pVar->enmRangeType = DBGCVAR_RANGE_BYTES; pVar->u64Range = cb; } } /** @todo move me!*/ static void dbgcVarSetNoRange(PDBGCVAR pVar) { if (pVar) { pVar->enmRangeType = DBGCVAR_RANGE_NONE; pVar->u64Range = 0; } } /** * Converts a DBGC variable to a DBGF address. * * @returns VBox status code. * @param pDbgc The DBGC instance. * @param pVar The variable. * @param pAddress Where to store the address. */ static int dbgcVarToDbgfAddr(PDBGC pDbgc, PCDBGCVAR pVar, PDBGFADDRESS pAddress) { AssertReturn(pVar, VERR_INVALID_PARAMETER); switch (pVar->enmType) { case DBGCVAR_TYPE_GC_FLAT: DBGFR3AddrFromFlat(pDbgc->pVM, pAddress, pVar->u.GCFlat); return VINF_SUCCESS; case DBGCVAR_TYPE_NUMBER: DBGFR3AddrFromFlat(pDbgc->pVM, pAddress, (RTGCUINTPTR)pVar->u.u64Number); return VINF_SUCCESS; case DBGCVAR_TYPE_GC_FAR: return DBGFR3AddrFromSelOff(pDbgc->pVM, pAddress, pVar->u.GCFar.sel, pVar->u.GCFar.sel); case DBGCVAR_TYPE_STRING: case DBGCVAR_TYPE_SYMBOL: { DBGCVAR Var; int rc = pDbgc->CmdHlp.pfnEval(&pDbgc->CmdHlp, &Var, "%%(%DV)", pVar); if (VBOX_FAILURE(rc)) return rc; return dbgcVarToDbgfAddr(pDbgc, &Var, pAddress); } case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: default: return VERR_PARSE_CONVERSION_FAILED; } } //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// // // // B r e a k p o i n t M a n a g e m e n t // // //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// /** * Adds a breakpoint to the DBGC breakpoint list. */ static int dbgcBpAdd(PDBGC pDbgc, RTUINT iBp, const char *pszCmd) { /* * Check if it already exists. */ PDBGCBP pBp = dbgcBpGet(pDbgc, iBp); if (pBp) return VERR_DBGC_BP_EXISTS; /* * Add the breakpoint. */ if (pszCmd) pszCmd = RTStrStripL(pszCmd); size_t cchCmd = pszCmd ? strlen(pszCmd) : 0; pBp = (PDBGCBP)RTMemAlloc(RT_OFFSETOF(DBGCBP, szCmd[cchCmd + 1])); if (!pBp) return VERR_NO_MEMORY; if (cchCmd) memcpy(pBp->szCmd, pszCmd, cchCmd + 1); else pBp->szCmd[0] = '\0'; pBp->cchCmd = cchCmd; pBp->iBp = iBp; pBp->pNext = pDbgc->pFirstBp; pDbgc->pFirstBp = pBp; return VINF_SUCCESS; } /** * Updates the a breakpoint. * * @returns VBox status code. * @param pDbgc The DBGC instance. * @param iBp The breakpoint to update. * @param pszCmd The new command. */ static int dbgcBpUpdate(PDBGC pDbgc, RTUINT iBp, const char *pszCmd) { /* * Find the breakpoint. */ PDBGCBP pBp = dbgcBpGet(pDbgc, iBp); if (!pBp) return VERR_DBGC_BP_NOT_FOUND; /* * Do we need to reallocate? */ if (pszCmd) pszCmd = RTStrStripL(pszCmd); if (!pszCmd || !*pszCmd) pBp->szCmd[0] = '\0'; else { size_t cchCmd = strlen(pszCmd); if (strlen(pBp->szCmd) >= cchCmd) { memcpy(pBp->szCmd, pszCmd, cchCmd + 1); pBp->cchCmd = cchCmd; } else { /* * Yes, let's do it the simple way... */ int rc = dbgcBpDelete(pDbgc, iBp); AssertRC(rc); return dbgcBpAdd(pDbgc, iBp, pszCmd); } } return VINF_SUCCESS; } /** * Deletes a breakpoint. * * @returns VBox status code. * @param pDbgc The DBGC instance. * @param iBp The breakpoint to delete. */ static int dbgcBpDelete(PDBGC pDbgc, RTUINT iBp) { /* * Search thru the list, when found unlink and free it. */ PDBGCBP pBpPrev = NULL; PDBGCBP pBp = pDbgc->pFirstBp; for (; pBp; pBp = pBp->pNext) { if (pBp->iBp == iBp) { if (pBpPrev) pBpPrev->pNext = pBp->pNext; else pDbgc->pFirstBp = pBp->pNext; RTMemFree(pBp); return VINF_SUCCESS; } pBpPrev = pBp; } return VERR_DBGC_BP_NOT_FOUND; } /** * Get a breakpoint. * * @returns Pointer to the breakpoint. * @returns NULL if the breakpoint wasn't found. * @param pDbgc The DBGC instance. * @param iBp The breakpoint to get. */ static PDBGCBP dbgcBpGet(PDBGC pDbgc, RTUINT iBp) { /* * Enumerate the list. */ PDBGCBP pBp = pDbgc->pFirstBp; for (; pBp; pBp = pBp->pNext) if (pBp->iBp == iBp) return pBp; return NULL; } /** * Executes the command of a breakpoint. * * @returns VINF_DBGC_BP_NO_COMMAND if there is no command associated with the breakpoint. * @returns VERR_DBGC_BP_NOT_FOUND if the breakpoint wasn't found. * @returns VERR_BUFFER_OVERFLOW if the is not enough space in the scratch buffer for the command. * @returns VBox status code from dbgcProcessCommand() other wise. * @param pDbgc The DBGC instance. * @param iBp The breakpoint to execute. */ static int dbgcBpExec(PDBGC pDbgc, RTUINT iBp) { /* * Find the breakpoint. */ PDBGCBP pBp = dbgcBpGet(pDbgc, iBp); if (!pBp) return VERR_DBGC_BP_NOT_FOUND; /* * Anything to do? */ if (!pBp->cchCmd) return VINF_DBGC_BP_NO_COMMAND; /* * Execute the command. * This means copying it to the scratch buffer and process it as if it * were user input. We must save and restore the state of the scratch buffer. */ /* Save the scratch state. */ char *pszScratch = pDbgc->pszScratch; unsigned iArg = pDbgc->iArg; /* Copy the command to the scratch buffer. */ size_t cbScratch = sizeof(pDbgc->achScratch) - (pDbgc->pszScratch - &pDbgc->achScratch[0]); if (pBp->cchCmd >= cbScratch) return VERR_BUFFER_OVERFLOW; memcpy(pDbgc->pszScratch, pBp->szCmd, pBp->cchCmd + 1); /* Execute the command. */ pDbgc->pszScratch = pDbgc->pszScratch + pBp->cchCmd + 1; int rc = dbgcProcessCommand(pDbgc, pszScratch, pBp->cchCmd); /* Restore the scratch state. */ pDbgc->iArg = iArg; pDbgc->pszScratch = pszScratch; return rc; } //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// // // // I n p u t , p a r s i n g a n d l o g g i n g // // //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// /** * Prints any log lines from the log buffer. * * The caller must not call function this unless pDbgc->fLog is set. * * @returns VBox status. (output related) * @param pDbgc Debugger console instance data. */ static int dbgcProcessLog(PDBGC pDbgc) { /** @todo */ NOREF(pDbgc); return 0; } /** * Handle input buffer overflow. * * Will read any available input looking for a '\n' to reset the buffer on. * * @returns VBox status. * @param pDbgc Debugger console instance data. */ static int dbgcInputOverflow(PDBGC pDbgc) { /* * Assert overflow status and reset the input buffer. */ if (!pDbgc->fInputOverflow) { pDbgc->fInputOverflow = true; pDbgc->iRead = pDbgc->iWrite = 0; pDbgc->cInputLines = 0; pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Input overflow!!\n"); } /* * Eat input till no more or there is a '\n'. * When finding a '\n' we'll continue normal processing. */ while (pDbgc->pBack->pfnInput(pDbgc->pBack, 0)) { size_t cbRead; int rc = pDbgc->pBack->pfnRead(pDbgc->pBack, &pDbgc->achInput[0], sizeof(pDbgc->achInput) - 1, &cbRead); if (VBOX_FAILURE(rc)) return rc; char *psz = (char *)memchr(&pDbgc->achInput[0], '\n', cbRead); if (psz) { pDbgc->fInputOverflow = false; pDbgc->iRead = psz - &pDbgc->achInput[0] + 1; pDbgc->iWrite = cbRead; pDbgc->cInputLines = 0; break; } } return 0; } /** * Read input and do some preprocessing. * * @returns VBox status. * In addition to the iWrite and achInput, cInputLines is maintained. * In case of an input overflow the fInputOverflow flag will be set. * @param pDbgc Debugger console instance data. */ static int dbgcInputRead(PDBGC pDbgc) { /* * We have ready input. * Read it till we don't have any or we have a full input buffer. */ int rc = 0; do { /* * More available buffer space? */ size_t cbLeft; if (pDbgc->iWrite > pDbgc->iRead) cbLeft = sizeof(pDbgc->achInput) - pDbgc->iWrite - (pDbgc->iRead == 0); else cbLeft = pDbgc->iRead - pDbgc->iWrite - 1; if (!cbLeft) { /* overflow? */ if (!pDbgc->cInputLines) rc = dbgcInputOverflow(pDbgc); break; } /* * Read one char and interpret it. */ char achRead[128]; size_t cbRead; rc = pDbgc->pBack->pfnRead(pDbgc->pBack, &achRead[0], RT_MIN(cbLeft, sizeof(achRead)), &cbRead); if (VBOX_FAILURE(rc)) return rc; char *psz = &achRead[0]; while (cbRead-- > 0) { char ch = *psz++; switch (ch) { /* * Ignore. */ case '\0': case '\r': case '\a': break; /* * Backspace. */ case '\b': Log2(("DBGC: backspace\n")); if (pDbgc->iRead != pDbgc->iWrite) { unsigned iWriteUndo = pDbgc->iWrite; if (pDbgc->iWrite) pDbgc->iWrite--; else pDbgc->iWrite = sizeof(pDbgc->achInput) - 1; if (pDbgc->achInput[pDbgc->iWrite] == '\n') pDbgc->iWrite = iWriteUndo; } break; /* * Add char to buffer. */ case '\t': case '\n': case ';': switch (ch) { case '\t': ch = ' '; break; case '\n': pDbgc->cInputLines++; break; } default: Log2(("DBGC: ch=%02x\n", (unsigned char)ch)); pDbgc->achInput[pDbgc->iWrite] = ch; if (++pDbgc->iWrite >= sizeof(pDbgc->achInput)) pDbgc->iWrite = 0; break; } } /* Terminate it to make it easier to read in the debugger. */ pDbgc->achInput[pDbgc->iWrite] = '\0'; } while (pDbgc->pBack->pfnInput(pDbgc->pBack, 0)); return rc; } /** * Finds a builtin symbol. * @returns Pointer to symbol descriptor on success. * @returns NULL on failure. * @param pDbgc The debug console instance. * @param pszSymbol The symbol name. */ static PCDBGCSYM dbgcLookupRegisterSymbol(PDBGC pDbgc, const char *pszSymbol) { for (unsigned iSym = 0; iSym < ELEMENTS(g_aSyms); iSym++) if (!strcmp(pszSymbol, g_aSyms[iSym].pszName)) return &g_aSyms[iSym]; /** @todo externally registered symbols. */ NOREF(pDbgc); return NULL; } /** * Resolves a symbol (or tries to do so at least). * * @returns 0 on success. * @returns VBox status on failure. * @param pDbgc The debug console instance. * @param pszSymbol The symbol name. * @param enmType The result type. * @param pResult Where to store the result. */ static int dbgcSymbolGet(PDBGC pDbgc, const char *pszSymbol, DBGCVARTYPE enmType, PDBGCVAR pResult) { /* * Builtin? */ PCDBGCSYM pSymDesc = dbgcLookupRegisterSymbol(pDbgc, pszSymbol); if (pSymDesc) { if (!pSymDesc->pfnGet) return VERR_PARSE_WRITEONLY_SYMBOL; return pSymDesc->pfnGet(pSymDesc, &pDbgc->CmdHlp, enmType, pResult); } /* * Ask PDM. */ /** @todo resolve symbols using PDM. */ /* * Ask the debug info manager. */ DBGFSYMBOL Symbol; int rc = DBGFR3SymbolByName(pDbgc->pVM, pszSymbol, &Symbol); if (VBOX_SUCCESS(rc)) { /* * Default return is a flat gc address. */ memset(pResult, 0, sizeof(*pResult)); pResult->enmRangeType = Symbol.cb ? DBGCVAR_RANGE_BYTES : DBGCVAR_RANGE_NONE; pResult->u64Range = Symbol.cb; pResult->enmType = DBGCVAR_TYPE_GC_FLAT; pResult->u.GCFlat = Symbol.Value; DBGCVAR VarTmp; switch (enmType) { /* nothing to do. */ case DBGCVAR_TYPE_GC_FLAT: case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_ANY: return VINF_SUCCESS; /* simply make it numeric. */ case DBGCVAR_TYPE_NUMBER: pResult->enmType = DBGCVAR_TYPE_NUMBER; pResult->u.u64Number = Symbol.Value; return VINF_SUCCESS; /* cast it. */ case DBGCVAR_TYPE_GC_PHYS: VarTmp = *pResult; return dbgcOpAddrPhys(pDbgc, &VarTmp, pResult); case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_FLAT: VarTmp = *pResult; return dbgcOpAddrHost(pDbgc, &VarTmp, pResult); case DBGCVAR_TYPE_HC_PHYS: VarTmp = *pResult; return dbgcOpAddrHostPhys(pDbgc, &VarTmp, pResult); default: AssertMsgFailed(("Internal error enmType=%d\n", enmType)); return VERR_INVALID_PARAMETER; } } return VERR_PARSE_NOT_IMPLEMENTED; } /** * Finds a routine. * * @returns Pointer to the command descriptor. * If the request was for an external command, the caller is responsible for * unlocking the external command list. * @returns NULL if not found. * @param pDbgc The debug console instance. * @param pachName Pointer to the routine string (not terminated). * @param cchName Length of the routine name. * @param fExternal Whether or not the routine is external. */ static PCDBGCCMD dbgcRoutineLookup(PDBGC pDbgc, const char *pachName, size_t cchName, bool fExternal) { if (!fExternal) { for (unsigned iCmd = 0; iCmd < ELEMENTS(g_aCmds); iCmd++) { if ( !strncmp(pachName, g_aCmds[iCmd].pszCmd, cchName) && !g_aCmds[iCmd].pszCmd[cchName]) return &g_aCmds[iCmd]; } } else { DBGCEXTCMDS_LOCK_RD(); for (PDBGCEXTCMDS pExtCmds = g_pExtCmdsHead; pExtCmds; pExtCmds = pExtCmds->pNext) { for (unsigned iCmd = 0; iCmd < pExtCmds->cCmds; iCmd++) { if ( !strncmp(pachName, pExtCmds->paCmds[iCmd].pszCmd, cchName) && !pExtCmds->paCmds[iCmd].pszCmd[cchName]) return &pExtCmds->paCmds[iCmd]; } } DBGCEXTCMDS_UNLOCK_RD(); } NOREF(pDbgc); return NULL; } /** * Searches for an operator descriptor which matches the start of * the expression given us. * * @returns Pointer to the operator on success. * @param pDbgc The debug console instance. * @param pszExpr Pointer to the expression string which might start with an operator. * @param fPreferBinary Whether to favour binary or unary operators. * Caller must assert that it's the disired type! Both types will still * be returned, this is only for resolving duplicates. * @param chPrev The previous char. Some operators requires a blank in front of it. */ static PCDBGCOP dbgcOperatorLookup(PDBGC pDbgc, const char *pszExpr, bool fPreferBinary, char chPrev) { PCDBGCOP pOp = NULL; for (unsigned iOp = 0; iOp < ELEMENTS(g_aOps); iOp++) { if ( g_aOps[iOp].szName[0] == pszExpr[0] && (!g_aOps[iOp].szName[1] || g_aOps[iOp].szName[1] == pszExpr[1]) && (!g_aOps[iOp].szName[2] || g_aOps[iOp].szName[2] == pszExpr[2])) { /* * Check that we don't mistake it for some other operator which have more chars. */ unsigned j; for (j = iOp + 1; j < ELEMENTS(g_aOps); j++) if ( g_aOps[j].cchName > g_aOps[iOp].cchName && g_aOps[j].szName[0] == pszExpr[0] && (!g_aOps[j].szName[1] || g_aOps[j].szName[1] == pszExpr[1]) && (!g_aOps[j].szName[2] || g_aOps[j].szName[2] == pszExpr[2]) ) break; if (j < ELEMENTS(g_aOps)) continue; /* we'll catch it later. (for theoretical +,++,+++ cases.) */ pOp = &g_aOps[iOp]; /* * Prefered type? */ if (g_aOps[iOp].fBinary == fPreferBinary) break; } } if (pOp) Log2(("dbgcOperatorLookup: pOp=%p %s\n", pOp, pOp->szName)); NOREF(pDbgc); NOREF(chPrev); return pOp; } /** * Initalizes g_bmOperatorChars. */ static void dbgcInitOpCharBitMap(void) { memset(g_bmOperatorChars, 0, sizeof(g_bmOperatorChars)); for (unsigned iOp = 0; iOp < RT_ELEMENTS(g_aOps); iOp++) ASMBitSet(&g_bmOperatorChars[0], (uint8_t)g_aOps[iOp].szName[0]); } /** * Checks whether the character may be the start of an operator. * * @returns true/false. * @param ch The character. */ DECLINLINE(bool) dbgcIsOpChar(char ch) { return ASMBitTest(&g_bmOperatorChars[0], (uint8_t)ch); } static int dbgcEvalSubString(PDBGC pDbgc, char *pszExpr, size_t cchExpr, PDBGCVAR pArg) { Log2(("dbgcEvalSubString: cchExpr=%d pszExpr=%s\n", cchExpr, pszExpr)); /* * Removing any quoting and escapings. */ char ch = *pszExpr; if (ch == '"' || ch == '\'' || ch == '`') { if (pszExpr[--cchExpr] != ch) return VERR_PARSE_UNBALANCED_QUOTE; cchExpr--; pszExpr++; /** @todo string unescaping. */ } pszExpr[cchExpr] = '\0'; /* * Make the argument. */ pArg->pDesc = NULL; pArg->pNext = NULL; pArg->enmType = DBGCVAR_TYPE_STRING; pArg->u.pszString = pszExpr; pArg->enmRangeType = DBGCVAR_RANGE_BYTES; pArg->u64Range = cchExpr; NOREF(pDbgc); return 0; } static int dbgcEvalSubNum(char *pszExpr, unsigned uBase, PDBGCVAR pArg) { Log2(("dbgcEvalSubNum: uBase=%d pszExpr=%s\n", uBase, pszExpr)); /* * Convert to number. */ uint64_t u64 = 0; char ch; while ((ch = *pszExpr) != '\0') { uint64_t u64Prev = u64; unsigned u = ch - '0'; if (u < 10 && u < uBase) u64 = u64 * uBase + u; else if (ch >= 'a' && (u = ch - ('a' - 10)) < uBase) u64 = u64 * uBase + u; else if (ch >= 'A' && (u = ch - ('A' - 10)) < uBase) u64 = u64 * uBase + u; else return VERR_PARSE_INVALID_NUMBER; /* check for overflow - ARG!!! How to detect overflow correctly!?!?!? */ if (u64Prev != u64 / uBase) return VERR_PARSE_NUMBER_TOO_BIG; /* next */ pszExpr++; } /* * Initialize the argument. */ pArg->pDesc = NULL; pArg->pNext = NULL; pArg->enmType = DBGCVAR_TYPE_NUMBER; pArg->u.u64Number = u64; pArg->enmRangeType = DBGCVAR_RANGE_NONE; pArg->u64Range = 0; return 0; } /** * Match variable and variable descriptor, promoting the variable if necessary. * * @returns VBox status code. * @param pDbgc Debug console instanace. * @param pVar Variable. * @param pVarDesc Variable descriptor. */ static int dbgcEvalSubMatchVar(PDBGC pDbgc, PDBGCVAR pVar, PCDBGCVARDESC pVarDesc) { /* * (If match or promoted to match, return, else break.) */ switch (pVarDesc->enmCategory) { /* * Anything goes */ case DBGCVAR_CAT_ANY: return VINF_SUCCESS; /* * Pointer with and without range. * We can try resolve strings and symbols as symbols and * promote numbers to flat GC pointers. */ case DBGCVAR_CAT_POINTER_NO_RANGE: if (pVar->enmRangeType != DBGCVAR_RANGE_NONE) return VERR_PARSE_NO_RANGE_ALLOWED; /* fallthru */ case DBGCVAR_CAT_POINTER: switch (pVar->enmType) { case DBGCVAR_TYPE_GC_FLAT: case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_GC_PHYS: case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: return VINF_SUCCESS; case DBGCVAR_TYPE_SYMBOL: case DBGCVAR_TYPE_STRING: { DBGCVAR Var; int rc = dbgcSymbolGet(pDbgc, pVar->u.pszString, DBGCVAR_TYPE_GC_FLAT, &Var); if (VBOX_SUCCESS(rc)) { /* deal with range */ if (pVar->enmRangeType != DBGCVAR_RANGE_NONE) { Var.enmRangeType = pVar->enmRangeType; Var.u64Range = pVar->u64Range; } else if (pVarDesc->enmCategory == DBGCVAR_CAT_POINTER_NO_RANGE) Var.enmRangeType = DBGCVAR_RANGE_NONE; *pVar = Var; return rc; } break; } case DBGCVAR_TYPE_NUMBER: { RTGCPTR GCPtr = (RTGCPTR)pVar->u.u64Number; pVar->enmType = DBGCVAR_TYPE_GC_FLAT; pVar->u.GCFlat = GCPtr; return VINF_SUCCESS; } default: break; } break; /* * GC pointer with and without range. * We can try resolve strings and symbols as symbols and * promote numbers to flat GC pointers. */ case DBGCVAR_CAT_GC_POINTER_NO_RANGE: if (pVar->enmRangeType != DBGCVAR_RANGE_NONE) return VERR_PARSE_NO_RANGE_ALLOWED; /* fallthru */ case DBGCVAR_CAT_GC_POINTER: switch (pVar->enmType) { case DBGCVAR_TYPE_GC_FLAT: case DBGCVAR_TYPE_GC_FAR: case DBGCVAR_TYPE_GC_PHYS: return VINF_SUCCESS; case DBGCVAR_TYPE_HC_FLAT: case DBGCVAR_TYPE_HC_FAR: case DBGCVAR_TYPE_HC_PHYS: return VERR_PARSE_CONVERSION_FAILED; case DBGCVAR_TYPE_SYMBOL: case DBGCVAR_TYPE_STRING: { DBGCVAR Var; int rc = dbgcSymbolGet(pDbgc, pVar->u.pszString, DBGCVAR_TYPE_GC_FLAT, &Var); if (VBOX_SUCCESS(rc)) { /* deal with range */ if (pVar->enmRangeType != DBGCVAR_RANGE_NONE) { Var.enmRangeType = pVar->enmRangeType; Var.u64Range = pVar->u64Range; } else if (pVarDesc->enmCategory == DBGCVAR_CAT_POINTER_NO_RANGE) Var.enmRangeType = DBGCVAR_RANGE_NONE; *pVar = Var; return rc; } break; } case DBGCVAR_TYPE_NUMBER: { RTGCPTR GCPtr = (RTGCPTR)pVar->u.u64Number; pVar->enmType = DBGCVAR_TYPE_GC_FLAT; pVar->u.GCFlat = GCPtr; return VINF_SUCCESS; } default: break; } break; /* * Number with or without a range. * Numbers can be resolved from symbols, but we cannot demote a pointer * to a number. */ case DBGCVAR_CAT_NUMBER_NO_RANGE: if (pVar->enmRangeType != DBGCVAR_RANGE_NONE) return VERR_PARSE_NO_RANGE_ALLOWED; /* fallthru */ case DBGCVAR_CAT_NUMBER: switch (pVar->enmType) { case DBGCVAR_TYPE_NUMBER: return VINF_SUCCESS; case DBGCVAR_TYPE_SYMBOL: case DBGCVAR_TYPE_STRING: { DBGCVAR Var; int rc = dbgcSymbolGet(pDbgc, pVar->u.pszString, DBGCVAR_TYPE_NUMBER, &Var); if (VBOX_SUCCESS(rc)) { *pVar = Var; return rc; } break; } default: break; } break; /* * Strings can easily be made from symbols (and of course strings). * We could consider reformatting the addresses and numbers into strings later... */ case DBGCVAR_CAT_STRING: switch (pVar->enmType) { case DBGCVAR_TYPE_SYMBOL: pVar->enmType = DBGCVAR_TYPE_STRING; /* fallthru */ case DBGCVAR_TYPE_STRING: return VINF_SUCCESS; default: break; } break; /* * Symol is pretty much the same thing as a string (at least until we actually implement it). */ case DBGCVAR_CAT_SYMBOL: switch (pVar->enmType) { case DBGCVAR_TYPE_STRING: pVar->enmType = DBGCVAR_TYPE_SYMBOL; /* fallthru */ case DBGCVAR_TYPE_SYMBOL: return VINF_SUCCESS; default: break; } break; /* * Anything else is illegal. */ default: AssertMsgFailed(("enmCategory=%d\n", pVar->enmType)); break; } return VERR_PARSE_NO_ARGUMENT_MATCH; } /** * Matches a set of variables with a description set. * * This is typically used for routine arguments before a call. The effects in * addition to the validation, is that some variables might be propagated to * other types in order to match the description. The following transformations * are supported: * - String reinterpreted as a symbol and resolved to a number or pointer. * - Number to a pointer. * - Pointer to a number. * @returns 0 on success with paVars. * @returns VBox error code for match errors. */ static int dbgcEvalSubMatchVars(PDBGC pDbgc, unsigned cVarsMin, unsigned cVarsMax, PCDBGCVARDESC paVarDescs, unsigned cVarDescs, PDBGCVAR paVars, unsigned cVars) { /* * Just do basic min / max checks first. */ if (cVars < cVarsMin) return VERR_PARSE_TOO_FEW_ARGUMENTS; if (cVars > cVarsMax) return VERR_PARSE_TOO_MANY_ARGUMENTS; /* * Match the descriptors and actual variables. */ PCDBGCVARDESC pPrevDesc = NULL; unsigned cCurDesc = 0; unsigned iVar = 0; unsigned iVarDesc = 0; while (iVar < cVars) { /* walk the descriptors */ if (iVarDesc >= cVarDescs) return VERR_PARSE_TOO_MANY_ARGUMENTS; if ( ( paVarDescs[iVarDesc].fFlags & DBGCVD_FLAGS_DEP_PREV && &paVarDescs[iVarDesc - 1] != pPrevDesc) || cCurDesc >= paVarDescs[iVarDesc].cTimesMax) { iVarDesc++; if (iVarDesc >= cVarDescs) return VERR_PARSE_TOO_MANY_ARGUMENTS; cCurDesc = 0; } /* * Skip thru optional arguments until we find something which matches * or can easily be promoted to what the descriptor want. */ for (;;) { int rc = dbgcEvalSubMatchVar(pDbgc, &paVars[iVar], &paVarDescs[iVarDesc]); if (VBOX_SUCCESS(rc)) { paVars[iVar].pDesc = &paVarDescs[iVarDesc]; cCurDesc++; break; } /* can we advance? */ if (paVarDescs[iVarDesc].cTimesMin > cCurDesc) return VERR_PARSE_ARGUMENT_TYPE_MISMATCH; if (++iVarDesc >= cVarDescs) return VERR_PARSE_ARGUMENT_TYPE_MISMATCH; cCurDesc = 0; } /* next var */ iVar++; } /* * Check that the rest of the descriptors are optional. */ while (iVarDesc < cVarDescs) { if (paVarDescs[iVarDesc].cTimesMin > cCurDesc) return VERR_PARSE_TOO_FEW_ARGUMENTS; cCurDesc = 0; /* next */ iVarDesc++; } return 0; } /** * Evaluates one argument with respect to unary operators. * * @returns 0 on success. pResult contains the result. * @returns VBox error code on parse or other evaluation error. * * @param pDbgc Debugger console instance data. * @param pszExpr The expression string. * @param pResult Where to store the result of the expression evaluation. */ static int dbgcEvalSubUnary(PDBGC pDbgc, char *pszExpr, size_t cchExpr, PDBGCVAR pResult) { Log2(("dbgcEvalSubUnary: cchExpr=%d pszExpr=%s\n", cchExpr, pszExpr)); /* * The state of the expression is now such that it will start by zero or more * unary operators and being followed by an expression of some kind. * The expression is either plain or in parenthesis. * * Being in a lazy, recursive mode today, the parsing is done as simple as possible. :-) * ASSUME: unary operators are all of equal precedence. */ int rc = 0; PCDBGCOP pOp = dbgcOperatorLookup(pDbgc, pszExpr, false, ' '); if (pOp) { /* binary operators means syntax error. */ if (pOp->fBinary) return VERR_PARSE_UNEXPECTED_OPERATOR; /* * If the next expression (the one following the unary operator) is in a * parenthesis a full eval is needed. If not the unary eval will suffice. */ /* calc and strip next expr. */ char *pszExpr2 = pszExpr + pOp->cchName; while (isblank(*pszExpr2)) pszExpr2++; if (!*pszExpr2) rc = VERR_PARSE_EMPTY_ARGUMENT; else { DBGCVAR Arg; if (*pszExpr2 == '(') rc = dbgcEvalSub(pDbgc, pszExpr2, cchExpr - (pszExpr2 - pszExpr), &Arg); else rc = dbgcEvalSubUnary(pDbgc, pszExpr2, cchExpr - (pszExpr2 - pszExpr), &Arg); if (VBOX_SUCCESS(rc)) rc = pOp->pfnHandlerUnary(pDbgc, &Arg, pResult); } } else { /* * Didn't find any operators, so it we have to check if this can be an * function call before assuming numeric or string expression. * * (ASSUMPTIONS:) * A function name only contains alphanumerical chars and it can not start * with a numerical character. * Immediately following the name is a parenthesis which must over * the remaining part of the expression. */ bool fExternal = *pszExpr == '.'; char *pszFun = fExternal ? pszExpr + 1 : pszExpr; char *pszFunEnd = NULL; if (pszExpr[cchExpr - 1] == ')' && isalpha(*pszFun)) { pszFunEnd = pszExpr + 1; while (*pszFunEnd != '(' && isalnum(*pszFunEnd)) pszFunEnd++; if (*pszFunEnd != '(') pszFunEnd = NULL; } if (pszFunEnd) { /* * Ok, it's a function call. */ if (fExternal) pszExpr++, cchExpr--; PCDBGCCMD pFun = dbgcRoutineLookup(pDbgc, pszExpr, pszFunEnd - pszExpr, fExternal); if (!pFun) return VERR_PARSE_FUNCTION_NOT_FOUND; if (!pFun->pResultDesc) return VERR_PARSE_NOT_A_FUNCTION; /* * Parse the expression in parenthesis. */ cchExpr -= pszFunEnd - pszExpr; pszExpr = pszFunEnd; /** @todo implement multiple arguments. */ DBGCVAR Arg; rc = dbgcEvalSub(pDbgc, pszExpr, cchExpr, &Arg); if (!rc) { rc = dbgcEvalSubMatchVars(pDbgc, pFun->cArgsMin, pFun->cArgsMax, pFun->paArgDescs, pFun->cArgDescs, &Arg, 1); if (!rc) rc = pFun->pfnHandler(pFun, &pDbgc->CmdHlp, pDbgc->pVM, &Arg, 1, pResult); } else if (rc == VERR_PARSE_EMPTY_ARGUMENT && pFun->cArgsMin == 0) rc = pFun->pfnHandler(pFun, &pDbgc->CmdHlp, pDbgc->pVM, NULL, 0, pResult); } else { /* * Didn't find any operators, so it must be a plain expression. * This might be numeric or a string expression. */ char ch = pszExpr[0]; char ch2 = pszExpr[1]; if (ch == '0' && (ch2 == 'x' || ch2 == 'X')) rc = dbgcEvalSubNum(pszExpr + 2, 16, pResult); else if (ch == '0' && (ch2 == 'i' || ch2 == 'i')) rc = dbgcEvalSubNum(pszExpr + 2, 10, pResult); else if (ch == '0' && (ch2 == 't' || ch2 == 'T')) rc = dbgcEvalSubNum(pszExpr + 2, 8, pResult); /// @todo 0b doesn't work as a binary prefix, we confuse it with 0bf8:0123 and stuff. //else if (ch == '0' && (ch2 == 'b' || ch2 == 'b')) // rc = dbgcEvalSubNum(pszExpr + 2, 2, pResult); else { /* * Hexadecimal number or a string? */ char *psz = pszExpr; while (isxdigit(*psz)) psz++; if (!*psz) rc = dbgcEvalSubNum(pszExpr, 16, pResult); else if ((*psz == 'h' || *psz == 'H') && !psz[1]) { *psz = '\0'; rc = dbgcEvalSubNum(pszExpr, 16, pResult); } else rc = dbgcEvalSubString(pDbgc, pszExpr, cchExpr, pResult); } } } return rc; } /** * Evaluates one argument. * * @returns 0 on success. pResult contains the result. * @returns VBox error code on parse or other evaluation error. * * @param pDbgc Debugger console instance data. * @param pszExpr The expression string. * @param pResult Where to store the result of the expression evaluation. */ static int dbgcEvalSub(PDBGC pDbgc, char *pszExpr, size_t cchExpr, PDBGCVAR pResult) { Log2(("dbgcEvalSub: cchExpr=%d pszExpr=%s\n", cchExpr, pszExpr)); /* * First we need to remove blanks in both ends. * ASSUMES: There is no quoting unless the entire expression is a string. */ /* stripping. */ while (cchExpr > 0 && isblank(pszExpr[cchExpr - 1])) pszExpr[--cchExpr] = '\0'; while (isblank(*pszExpr)) pszExpr++, cchExpr--; if (!*pszExpr) return VERR_PARSE_EMPTY_ARGUMENT; /* it there is any kind of quoting in the expression, it's string meat. */ if (strpbrk(pszExpr, "\"'`")) return dbgcEvalSubString(pDbgc, pszExpr, cchExpr, pResult); /* * Check if there are any parenthesis which needs removing. */ if (pszExpr[0] == '(' && pszExpr[cchExpr - 1] == ')') { do { unsigned cPar = 1; char *psz = pszExpr + 1; char ch; while ((ch = *psz) != '\0') { if (ch == '(') cPar++; else if (ch == ')') { if (cPar <= 0) return VERR_PARSE_UNBALANCED_PARENTHESIS; cPar--; if (cPar == 0 && psz[1]) /* If not at end, there's nothing to do. */ break; } /* next */ psz++; } if (ch) break; /* remove the parenthesis. */ pszExpr++; cchExpr -= 2; pszExpr[cchExpr] = '\0'; /* strip blanks. */ while (cchExpr > 0 && isblank(pszExpr[cchExpr - 1])) pszExpr[--cchExpr] = '\0'; while (isblank(*pszExpr)) pszExpr++, cchExpr--; if (!*pszExpr) return VERR_PARSE_EMPTY_ARGUMENT; } while (pszExpr[0] == '(' && pszExpr[cchExpr - 1] == ')'); } /* tabs to spaces. */ char *psz = pszExpr; while ((psz = strchr(psz, '\t')) != NULL) *psz = ' '; /* * Now, we need to look for the binary operator with the lowest precedence. * * If there are no operators we're left with a simple expression which we * evaluate with respect to unary operators */ char *pszOpSplit = NULL; PCDBGCOP pOpSplit = NULL; unsigned cBinaryOps = 0; unsigned cPar = 0; char ch; char chPrev = ' '; bool fBinary = false; psz = pszExpr; while ((ch = *psz) != '\0') { //Log2(("ch=%c cPar=%d fBinary=%d\n", ch, cPar, fBinary)); /* * Parenthesis. */ if (ch == '(') { cPar++; fBinary = false; } else if (ch == ')') { if (cPar <= 0) return VERR_PARSE_UNBALANCED_PARENTHESIS; cPar--; fBinary = true; } /* * Potential operator. */ else if (cPar == 0 && !isblank(ch)) { PCDBGCOP pOp = dbgcIsOpChar(ch) ? dbgcOperatorLookup(pDbgc, psz, fBinary, chPrev) : NULL; if (pOp) { /* If not the right kind of operator we've got a syntax error. */ if (pOp->fBinary != fBinary) return VERR_PARSE_UNEXPECTED_OPERATOR; /* * Update the parse state and skip the operator. */ if (!pOpSplit) { pOpSplit = pOp; pszOpSplit = psz; cBinaryOps = fBinary; } else if (fBinary) { cBinaryOps++; if (pOp->iPrecedence >= pOpSplit->iPrecedence) { pOpSplit = pOp; pszOpSplit = psz; } } psz += pOp->cchName - 1; fBinary = false; } else fBinary = true; } /* next */ psz++; chPrev = ch; } /* parse loop. */ /* * Either we found an operator to divide the expression by * or we didn't find any. In the first case it's divide and * conquer. In the latter it's a single expression which * needs dealing with its unary operators if any. */ int rc; if ( cBinaryOps && pOpSplit->fBinary) { /* process 1st sub expression. */ *pszOpSplit = '\0'; DBGCVAR Arg1; rc = dbgcEvalSub(pDbgc, pszExpr, pszOpSplit - pszExpr, &Arg1); if (VBOX_SUCCESS(rc)) { /* process 2nd sub expression. */ char *psz2 = pszOpSplit + pOpSplit->cchName; DBGCVAR Arg2; rc = dbgcEvalSub(pDbgc, psz2, cchExpr - (psz2 - pszExpr), &Arg2); if (VBOX_SUCCESS(rc)) /* apply the operator. */ rc = pOpSplit->pfnHandlerBinary(pDbgc, &Arg1, &Arg2, pResult); } } else if (cBinaryOps) { /* process sub expression. */ pszOpSplit += pOpSplit->cchName; DBGCVAR Arg; rc = dbgcEvalSub(pDbgc, pszOpSplit, cchExpr - (pszOpSplit - pszExpr), &Arg); if (VBOX_SUCCESS(rc)) /* apply the operator. */ rc = pOpSplit->pfnHandlerUnary(pDbgc, &Arg, pResult); } else /* plain expression or using unary operators perhaps with paratheses. */ rc = dbgcEvalSubUnary(pDbgc, pszExpr, cchExpr, pResult); return rc; } /** * Parses the arguments of one command. * * @returns 0 on success. * @returns VBox error code on parse error with *pcArg containing the argument causing trouble. * @param pDbgc Debugger console instance data. * @param pCmd Pointer to the command descriptor. * @param pszArg Pointer to the arguments to parse. * @param paArgs Where to store the parsed arguments. * @param cArgs Size of the paArgs array. * @param pcArgs Where to store the number of arguments. * In the event of an error this is used to store the index of the offending argument. */ static int dbgcProcessArguments(PDBGC pDbgc, PCDBGCCMD pCmd, char *pszArgs, PDBGCVAR paArgs, unsigned cArgs, unsigned *pcArgs) { Log2(("dbgcProcessArguments: pCmd=%s pszArgs='%s'\n", pCmd->pszCmd, pszArgs)); /* * Check if we have any argument and if the command takes any. */ *pcArgs = 0; /* strip leading blanks. */ while (*pszArgs && isblank(*pszArgs)) pszArgs++; if (!*pszArgs) { if (!pCmd->cArgsMin) return 0; return VERR_PARSE_TOO_FEW_ARGUMENTS; } /** @todo fixme - foo() doesn't work. */ if (!pCmd->cArgsMax) return VERR_PARSE_TOO_MANY_ARGUMENTS; /* * This is a hack, it's "temporary" and should go away "when" the parser is * modified to match arguments while parsing. */ if ( pCmd->cArgsMax == 1 && pCmd->cArgsMin == 1 && pCmd->cArgDescs == 1 && pCmd->paArgDescs[0].enmCategory == DBGCVAR_CAT_STRING && cArgs >= 1) { *pcArgs = 1; RTStrStripR(pszArgs); return dbgcEvalSubString(pDbgc, pszArgs, strlen(pszArgs), &paArgs[0]); } /* * The parse loop. */ PDBGCVAR pArg0 = &paArgs[0]; PDBGCVAR pArg = pArg0; *pcArgs = 0; do { /* * Can we have another argument? */ if (*pcArgs >= pCmd->cArgsMax) return VERR_PARSE_TOO_MANY_ARGUMENTS; if (pArg >= &paArgs[cArgs]) return VERR_PARSE_ARGUMENT_OVERFLOW; /* * Find the end of the argument. */ int cPar = 0; char chQuote = '\0'; char *pszEnd = NULL; char *psz = pszArgs; char ch; bool fBinary = false; for (;;) { /* * Check for the end. */ if ((ch = *psz) == '\0') { if (chQuote) return VERR_PARSE_UNBALANCED_QUOTE; if (cPar) return VERR_PARSE_UNBALANCED_PARENTHESIS; pszEnd = psz; break; } /* * When quoted we ignore everything but the quotation char. * We use the REXX way of escaping the quotation char, i.e. double occurence. */ else if (ch == '\'' || ch == '"' || ch == '`') { if (chQuote) { /* end quote? */ if (ch == chQuote) { if (psz[1] == ch) psz++; /* skip the escaped quote char */ else chQuote = '\0'; /* end of quoted string. */ } } else chQuote = ch; /* open new quote */ } /* * Parenthesis can of course be nested. */ else if (ch == '(') { cPar++; fBinary = false; } else if (ch == ')') { if (!cPar) return VERR_PARSE_UNBALANCED_PARENTHESIS; cPar--; fBinary = true; } else if (!chQuote && !cPar) { /* * Encountering blanks may mean the end of it all. A binary operator * will force continued parsing. */ if (isblank(*psz)) { pszEnd = psz++; /* just in case. */ while (isblank(*psz)) psz++; PCDBGCOP pOp = dbgcOperatorLookup(pDbgc, psz, fBinary, ' '); if (!pOp || pOp->fBinary != fBinary) break; /* the end. */ psz += pOp->cchName; while (isblank(*psz)) /* skip blanks so we don't get here again */ psz++; fBinary = false; continue; } /* * Look for operators without a space up front. */ if (dbgcIsOpChar(*psz)) { PCDBGCOP pOp = dbgcOperatorLookup(pDbgc, psz, fBinary, ' '); if (pOp) { if (pOp->fBinary != fBinary) { pszEnd = psz; /** @todo this is a parsing error really. */ break; /* the end. */ } psz += pOp->cchName; while (isblank(*psz)) /* skip blanks so we don't get here again */ psz++; fBinary = false; continue; } } fBinary = true; } /* next char */ psz++; } *pszEnd = '\0'; /* (psz = next char to process) */ /* * Parse and evaluate the argument. */ int rc = dbgcEvalSub(pDbgc, pszArgs, strlen(pszArgs), pArg); if (VBOX_FAILURE(rc)) return rc; /* * Next. */ pArg++; (*pcArgs)++; pszArgs = psz; while (*pszArgs && isblank(*pszArgs)) pszArgs++; } while (*pszArgs); /* * Match the arguments. */ return dbgcEvalSubMatchVars(pDbgc, pCmd->cArgsMin, pCmd->cArgsMax, pCmd->paArgDescs, pCmd->cArgDescs, pArg0, pArg - pArg0); } /** * Process one command. * * @returns VBox status code. Any error indicates the termination of the console session. * @param pDbgc Debugger console instance data. * @param pszCmd Pointer to the command. * @param cchCmd Length of the command. */ static int dbgcProcessCommand(PDBGC pDbgc, char *pszCmd, size_t cchCmd) { char *pszCmdInput = pszCmd; /* * Skip blanks. */ while (isblank(*pszCmd)) pszCmd++, cchCmd--; /* external command? */ bool fExternal = *pszCmd == '.'; if (fExternal) pszCmd++, cchCmd--; /* * Find arguments. */ char *pszArgs = pszCmd; while (isalnum(*pszArgs)) pszArgs++; if (*pszArgs && (!isblank(*pszArgs) || pszArgs == pszCmd)) { pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error in command '%s'!\n", pszCmdInput); return 0; } /* * Find the command. */ PCDBGCCMD pCmd = dbgcRoutineLookup(pDbgc, pszCmd, pszArgs - pszCmd, fExternal); if (!pCmd || (pCmd->fFlags & DBGCCMD_FLAGS_FUNCTION)) return pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Unknown command '%s'!\n", pszCmdInput); /* * Parse arguments (if any). */ unsigned cArgs; int rc = dbgcProcessArguments(pDbgc, pCmd, pszArgs, &pDbgc->aArgs[pDbgc->iArg], ELEMENTS(pDbgc->aArgs) - pDbgc->iArg, &cArgs); /* * Execute the command. */ if (!rc) { rc = pCmd->pfnHandler(pCmd, &pDbgc->CmdHlp, pDbgc->pVM, &pDbgc->aArgs[0], cArgs, NULL); } else { /* report parse / eval error. */ switch (rc) { case VERR_PARSE_TOO_FEW_ARGUMENTS: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error: Too few arguments. Minimum is %d for command '%s'.\n", pCmd->cArgsMin, pCmd->pszCmd); break; case VERR_PARSE_TOO_MANY_ARGUMENTS: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error: Too many arguments. Maximum is %d for command '%s'.\n", pCmd->cArgsMax, pCmd->pszCmd); break; case VERR_PARSE_ARGUMENT_OVERFLOW: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error: Too many arguments.\n"); break; case VERR_PARSE_UNBALANCED_QUOTE: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error: Unbalanced quote (argument %d).\n", cArgs); break; case VERR_PARSE_UNBALANCED_PARENTHESIS: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error: Unbalanced parenthesis (argument %d).\n", cArgs); break; case VERR_PARSE_EMPTY_ARGUMENT: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error: An argument or subargument contains nothing useful (argument %d).\n", cArgs); break; case VERR_PARSE_UNEXPECTED_OPERATOR: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error: Invalid operator usage (argument %d).\n", cArgs); break; case VERR_PARSE_INVALID_NUMBER: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error: Ivalid numeric value (argument %d). If a string was the intention, then quote it.\n", cArgs); break; case VERR_PARSE_NUMBER_TOO_BIG: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: Numeric overflow (argument %d).\n", cArgs); break; case VERR_PARSE_INVALID_OPERATION: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: Invalid operation attempted (argument %d).\n", cArgs); break; case VERR_PARSE_FUNCTION_NOT_FOUND: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: Function not found (argument %d).\n", cArgs); break; case VERR_PARSE_NOT_A_FUNCTION: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: The function specified is not a function (argument %d).\n", cArgs); break; case VERR_PARSE_NO_MEMORY: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: Out memory in the regular heap! Expect odd stuff to happen...\n", cArgs); break; case VERR_PARSE_INCORRECT_ARG_TYPE: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: Incorrect argument type (argument %d?).\n", cArgs); break; case VERR_PARSE_VARIABLE_NOT_FOUND: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: An undefined variable was referenced (argument %d).\n", cArgs); break; case VERR_PARSE_CONVERSION_FAILED: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: A conversion between two types failed (argument %d).\n", cArgs); break; case VERR_PARSE_NOT_IMPLEMENTED: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: You hit a debugger feature which isn't implemented yet (argument %d).\n", cArgs); break; case VERR_PARSE_BAD_RESULT_TYPE: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: Couldn't satisfy a request for a specific result type (argument %d). (Usually applies to symbols)\n", cArgs); break; case VERR_PARSE_WRITEONLY_SYMBOL: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: Cannot get symbol, it's set only (argument %d).\n", cArgs); break; default: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Error: Unknown error %d!\n", rc); return rc; } /* * Parse errors are non fatal. */ if (rc >= VERR_PARSE_FIRST && rc < VERR_PARSE_LAST) rc = 0; } return rc; } /** * Process all commands current in the buffer. * * @returns VBox status code. Any error indicates the termination of the console session. * @param pDbgc Debugger console instance data. */ static int dbgcProcessCommands(PDBGC pDbgc) { int rc = 0; while (pDbgc->cInputLines) { /* * Empty the log buffer if we're hooking the log. */ if (pDbgc->fLog) { rc = dbgcProcessLog(pDbgc); if (VBOX_FAILURE(rc)) break; } if (pDbgc->iRead == pDbgc->iWrite) { AssertMsgFailed(("The input buffer is empty while cInputLines=%d!\n", pDbgc->cInputLines)); pDbgc->cInputLines = 0; return 0; } /* * Copy the command to the parse buffer. */ char ch; char *psz = &pDbgc->achInput[pDbgc->iRead]; char *pszTrg = &pDbgc->achScratch[0]; while ((*pszTrg = ch = *psz++) != ';' && ch != '\n' ) { if (psz == &pDbgc->achInput[sizeof(pDbgc->achInput)]) psz = &pDbgc->achInput[0]; if (psz == &pDbgc->achInput[pDbgc->iWrite]) { AssertMsgFailed(("The buffer contains no commands while cInputLines=%d!\n", pDbgc->cInputLines)); pDbgc->cInputLines = 0; return 0; } pszTrg++; } *pszTrg = '\0'; /* * Advance the buffer. */ pDbgc->iRead = psz - &pDbgc->achInput[0]; if (ch == '\n') pDbgc->cInputLines--; /* * Parse and execute this command. */ pDbgc->pszScratch = psz; pDbgc->iArg = 0; rc = dbgcProcessCommand(pDbgc, &pDbgc->achScratch[0], psz - &pDbgc->achScratch[0] - 1); if (rc) break; } return rc; } /** * Reads input, parses it and executes commands on '\n'. * * @returns VBox status. * @param pDbgc Debugger console instance data. */ static int dbgcProcessInput(PDBGC pDbgc) { /* * We know there's input ready, so let's read it first. */ int rc = dbgcInputRead(pDbgc); if (VBOX_FAILURE(rc)) return rc; /* * Now execute any ready commands. */ if (pDbgc->cInputLines) { /** @todo this fReady stuff is broken. */ pDbgc->fReady = false; rc = dbgcProcessCommands(pDbgc); if (VBOX_SUCCESS(rc) && rc != VWRN_DBGC_CMD_PENDING) pDbgc->fReady = true; if ( VBOX_SUCCESS(rc) && pDbgc->iRead == pDbgc->iWrite && pDbgc->fReady) rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "VBoxDbg> "); } return rc; } /** * Gets the event context identifier string. * @returns Read only string. * @param enmCtx The context. */ static const char *dbgcGetEventCtx(DBGFEVENTCTX enmCtx) { switch (enmCtx) { case DBGFEVENTCTX_RAW: return "raw"; case DBGFEVENTCTX_REM: return "rem"; case DBGFEVENTCTX_HWACCL: return "hwaccl"; case DBGFEVENTCTX_HYPER: return "hyper"; case DBGFEVENTCTX_OTHER: return "other"; case DBGFEVENTCTX_INVALID: return "!Invalid Event Ctx!"; default: AssertMsgFailed(("enmCtx=%d\n", enmCtx)); return "!Unknown Event Ctx!"; } } /** * Processes debugger events. * * @returns VBox status. * @param pDbgc DBGC Instance data. * @param pEvent Pointer to event data. */ static int dbgcProcessEvent(PDBGC pDbgc, PCDBGFEVENT pEvent) { /* * Flush log first. */ if (pDbgc->fLog) { int rc = dbgcProcessLog(pDbgc); if (VBOX_FAILURE(rc)) return rc; } /* * Process the event. */ pDbgc->pszScratch = &pDbgc->achInput[0]; pDbgc->iArg = 0; bool fPrintPrompt = true; int rc = VINF_SUCCESS; switch (pEvent->enmType) { /* * The first part is events we have initiated with commands. */ case DBGFEVENT_HALT_DONE: { rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: VM %p is halted! (%s)\n", pDbgc->pVM, dbgcGetEventCtx(pEvent->enmCtx)); pDbgc->fRegCtxGuest = true; /* we're always in guest context when halted. */ if (VBOX_SUCCESS(rc)) rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r"); break; } /* * The second part is events which can occur at any time. */ case DBGFEVENT_FATAL_ERROR: { rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbf event: Fatal error! (%s)\n", dbgcGetEventCtx(pEvent->enmCtx)); pDbgc->fRegCtxGuest = false; /* fatal errors are always in hypervisor. */ if (VBOX_SUCCESS(rc)) rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r"); break; } case DBGFEVENT_BREAKPOINT: case DBGFEVENT_BREAKPOINT_HYPER: { bool fRegCtxGuest = pDbgc->fRegCtxGuest; pDbgc->fRegCtxGuest = pEvent->enmType == DBGFEVENT_BREAKPOINT; rc = dbgcBpExec(pDbgc, pEvent->u.Bp.iBp); switch (rc) { case VERR_DBGC_BP_NOT_FOUND: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: Unknown breakpoint %u! (%s)\n", pEvent->u.Bp.iBp, dbgcGetEventCtx(pEvent->enmCtx)); break; case VINF_DBGC_BP_NO_COMMAND: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: Breakpoint %u! (%s)\n", pEvent->u.Bp.iBp, dbgcGetEventCtx(pEvent->enmCtx)); break; case VINF_BUFFER_OVERFLOW: rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: Breakpoint %u! Command too long to execute! (%s)\n", pEvent->u.Bp.iBp, dbgcGetEventCtx(pEvent->enmCtx)); break; default: break; } if (VBOX_SUCCESS(rc) && DBGFR3IsHalted(pDbgc->pVM)) rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r"); else pDbgc->fRegCtxGuest = fRegCtxGuest; break; } case DBGFEVENT_STEPPED: case DBGFEVENT_STEPPED_HYPER: { pDbgc->fRegCtxGuest = pEvent->enmType == DBGFEVENT_STEPPED; rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: Single step! (%s)\n", dbgcGetEventCtx(pEvent->enmCtx)); if (VBOX_SUCCESS(rc)) rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r"); break; } case DBGFEVENT_ASSERTION_HYPER: { pDbgc->fRegCtxGuest = false; rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: Hypervisor Assertion! (%s)\n" "%s" "%s" "\n", dbgcGetEventCtx(pEvent->enmCtx), pEvent->u.Assert.pszMsg1, pEvent->u.Assert.pszMsg2); if (VBOX_SUCCESS(rc)) rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r"); break; } case DBGFEVENT_DEV_STOP: { rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\n" "dbgf event: DBGFSTOP (%s)\n" "File: %s\n" "Line: %d\n" "Function: %s\n", dbgcGetEventCtx(pEvent->enmCtx), pEvent->u.Src.pszFile, pEvent->u.Src.uLine, pEvent->u.Src.pszFunction); if (VBOX_SUCCESS(rc) && pEvent->u.Src.pszMessage && *pEvent->u.Src.pszMessage) rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Message: %s\n", pEvent->u.Src.pszMessage); if (VBOX_SUCCESS(rc)) rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r"); break; } case DBGFEVENT_INVALID_COMMAND: { rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf/dbgc error: Invalid command event!\n"); fPrintPrompt = !pDbgc->fReady; break; } case DBGFEVENT_TERMINATING: { pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\nVM is terminating!\n"); rc = VERR_GENERAL_FAILURE; break; } default: { rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf/dbgc error: Unknown event %d!\n", pEvent->enmType); fPrintPrompt = !pDbgc->fReady; break; } } /* * Prompt, anyone? */ if (fPrintPrompt && VBOX_SUCCESS(rc)) { rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "VBoxDbg> "); } return rc; } /** * Make a console instance. * * This will not return until either an 'exit' command is issued or a error code * indicating connection loss is encountered. * * @returns VINF_SUCCESS if console termination caused by the 'exit' command. * @returns The VBox status code causing the console termination. * * @param pVM VM Handle. * @param pBack Pointer to the backend structure. This must contain * a full set of function pointers to service the console. * @param fFlags Reserved, must be zero. * @remark A forced termination of the console is easiest done by forcing the * callbacks to return fatal failures. */ DBGDECL(int) DBGCCreate(PVM pVM, PDBGCBACK pBack, unsigned fFlags) { /* * Validate input. */ AssertReturn(VALID_PTR(pVM), VERR_INVALID_PARAMETER); AssertReturn(VALID_PTR(pBack), VERR_INVALID_PARAMETER); AssertMsgReturn(!fFlags, ("%#x", fFlags), VERR_INVALID_PARAMETER); /* * Allocate and initialize instance data */ PDBGC pDbgc = (PDBGC)RTMemAllocZ(sizeof(*pDbgc)); if (!pDbgc) return VERR_NO_MEMORY; pDbgc->CmdHlp.pfnWrite = dbgcHlpWrite; pDbgc->CmdHlp.pfnPrintfV = dbgcHlpPrintfV; pDbgc->CmdHlp.pfnPrintf = dbgcHlpPrintf; pDbgc->CmdHlp.pfnVBoxErrorV = dbgcHlpVBoxErrorV; pDbgc->CmdHlp.pfnVBoxError = dbgcHlpVBoxError; pDbgc->CmdHlp.pfnMemRead = dbgcHlpMemRead; pDbgc->CmdHlp.pfnMemWrite = dbgcHlpMemWrite; pDbgc->CmdHlp.pfnEval = dbgcHlpEval; pDbgc->CmdHlp.pfnExec = dbgcHlpExec; pDbgc->CmdHlp.pfnVarToDbgfAddr = dbgcHlpVarToDbgfAddr; pDbgc->CmdHlp.pfnVarToBool = dbgcHlpVarToBool; pDbgc->pBack = pBack; pDbgc->pszScratch = &pDbgc->achScratch[0]; pDbgc->fRegTerse = true; pDbgc->fRegCtxGuest = true; pDbgc->fLog = false; pDbgc->iRead = 0; pDbgc->iWrite = 0; pDbgc->fReady = true; pDbgc->fInputOverflow = false; pDbgc->cInputLines = 0; dbgcInitOpCharBitMap(); /* * Print welcome message. */ int rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Welcome to the VirtualBox Debugger!\n"); if (VBOX_FAILURE(rc)) goto l_failure; /* * Attach to the VM. */ rc = DBGFR3Attach(pVM); if (VBOX_FAILURE(rc)) { rc = pDbgc->CmdHlp.pfnVBoxError(&pDbgc->CmdHlp, rc, "When trying to attach to VM %p\n", pDbgc->pVM); goto l_failure; } pDbgc->pVM = pVM; /* * Print commandline and auto select result. */ rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Current VM is %08x\n" /** @todo get and print the VM name! */ "VBoxDbg> ", pDbgc->pVM); if (VBOX_FAILURE(rc)) goto l_failure; /* * Main Debugger Loop. * * This loop will either block on waiting for input or on waiting on * debug events. If we're forwarding the log we cannot wait for long * before we must flush the log. */ for (rc = 0;;) { if (pDbgc->pVM && DBGFR3CanWait(pDbgc->pVM)) { /* * Wait for a debug event. */ PCDBGFEVENT pEvent; rc = DBGFR3EventWait(pDbgc->pVM, pDbgc->fLog ? 1 : 32, &pEvent); if (VBOX_SUCCESS(rc)) { rc = dbgcProcessEvent(pDbgc, pEvent); if (VBOX_FAILURE(rc)) break; } else if (rc != VERR_TIMEOUT) break; /* * Check for input. */ if (pBack->pfnInput(pDbgc->pBack, 0)) { rc = dbgcProcessInput(pDbgc); if (VBOX_FAILURE(rc)) break; } } else { /* * Wait for input. If Logging is enabled we'll only wait very briefly. */ if (pBack->pfnInput(pDbgc->pBack, pDbgc->fLog ? 1 : 1000)) { rc = dbgcProcessInput(pDbgc); if (VBOX_FAILURE(rc)) break; } } /* * Forward log output. */ if (pDbgc->fLog) { rc = dbgcProcessLog(pDbgc); if (VBOX_FAILURE(rc)) break; } } l_failure: /* * Cleanup console debugger session. */ /* Disable log hook. */ if (pDbgc->fLog) { } /* Detach from the VM. */ if (pDbgc->pVM) DBGFR3Detach(pDbgc->pVM); /* finally, free the instance memory. */ RTMemFree(pDbgc); return rc; } /** * Register one or more external commands. * * @returns VBox status. * @param paCommands Pointer to an array of command descriptors. * The commands must be unique. It's not possible * to register the same commands more than once. * @param cCommands Number of commands. */ DBGDECL(int) DBGCRegisterCommands(PCDBGCCMD paCommands, unsigned cCommands) { /* * Lock the list. */ DBGCEXTCMDS_LOCK_WR(); PDBGCEXTCMDS pCur = g_pExtCmdsHead; while (pCur) { if (paCommands == pCur->paCmds) { DBGCEXTCMDS_UNLOCK_WR(); AssertMsgFailed(("Attempt at re-registering %d command(s)!\n", cCommands)); return VWRN_DBGC_ALREADY_REGISTERED; } pCur = pCur->pNext; } /* * Allocate new chunk. */ int rc = 0; pCur = (PDBGCEXTCMDS)RTMemAlloc(sizeof(*pCur)); if (pCur) { pCur->cCmds = cCommands; pCur->paCmds = paCommands; pCur->pNext = g_pExtCmdsHead; g_pExtCmdsHead = pCur; } else rc = VERR_NO_MEMORY; DBGCEXTCMDS_UNLOCK_WR(); return rc; } /** * Deregister one or more external commands previously registered by * DBGCRegisterCommands(). * * @returns VBox status. * @param paCommands Pointer to an array of command descriptors * as given to DBGCRegisterCommands(). * @param cCommands Number of commands. */ DBGDECL(int) DBGCDeregisterCommands(PCDBGCCMD paCommands, unsigned cCommands) { /* * Lock the list. */ DBGCEXTCMDS_LOCK_WR(); PDBGCEXTCMDS pPrev = NULL; PDBGCEXTCMDS pCur = g_pExtCmdsHead; while (pCur) { if (paCommands == pCur->paCmds) { if (pPrev) pPrev->pNext = pCur->pNext; else g_pExtCmdsHead = pCur->pNext; DBGCEXTCMDS_UNLOCK_WR(); RTMemFree(pCur); return VINF_SUCCESS; } pPrev = pCur; pCur = pCur->pNext; } DBGCEXTCMDS_UNLOCK_WR(); NOREF(cCommands); return VERR_DBGC_COMMANDS_NOT_REGISTERED; }