/* $Id: DevHDACommon.cpp 76019 2018-12-06 15:24:32Z vboxsync $ */ /** @file * DevHDACommon.cpp - Shared HDA device functions. */ /* * Copyright (C) 2017-2018 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #include #include #define LOG_GROUP LOG_GROUP_DEV_HDA #include #include "DrvAudio.h" #include "DevHDA.h" #include "DevHDACommon.h" #include "HDAStream.h" #ifndef LOG_ENABLED /** * Processes (de/asserts) the interrupt according to the HDA's current state. * * @returns IPRT status code. * @param pThis HDA state. */ int hdaProcessInterrupt(PHDASTATE pThis) #else /** * Processes (de/asserts) the interrupt according to the HDA's current state. * Debug version. * * @returns IPRT status code. * @param pThis HDA state. * @param pszSource Caller information. */ int hdaProcessInterrupt(PHDASTATE pThis, const char *pszSource) #endif { uint32_t uIntSts = hdaGetINTSTS(pThis); HDA_REG(pThis, INTSTS) = uIntSts; /* NB: It is possible to have GIS set even when CIE/SIEn are all zero; the GIS bit does * not control the interrupt signal. See Figure 4 on page 54 of the HDA 1.0a spec. */ /* Global Interrupt Enable (GIE) set? */ if ( (HDA_REG(pThis, INTCTL) & HDA_INTCTL_GIE) && (HDA_REG(pThis, INTSTS) & HDA_REG(pThis, INTCTL) & (HDA_INTCTL_CIE | HDA_STRMINT_MASK))) { Log3Func(("Asserted (%s)\n", pszSource)); PDMDevHlpPCISetIrq(pThis->CTX_SUFF(pDevIns), 0, 1 /* Assert */); pThis->u8IRQL = 1; #ifdef DEBUG pThis->Dbg.IRQ.tsAssertedNs = RTTimeNanoTS(); pThis->Dbg.IRQ.tsProcessedLastNs = pThis->Dbg.IRQ.tsAssertedNs; #endif } else { Log3Func(("Deasserted (%s)\n", pszSource)); PDMDevHlpPCISetIrq(pThis->CTX_SUFF(pDevIns), 0, 0 /* Deassert */); pThis->u8IRQL = 0; } return VINF_SUCCESS; } /** * Retrieves the currently set value for the wall clock. * * @return IPRT status code. * @return Currently set wall clock value. * @param pThis HDA state. * * @remark Operation is atomic. */ uint64_t hdaWalClkGetCurrent(PHDASTATE pThis) { return ASMAtomicReadU64(&pThis->u64WalClk); } #ifdef IN_RING3 /** * Sets the actual WALCLK register to the specified wall clock value. * The specified wall clock value only will be set (unless fForce is set to true) if all * handled HDA streams have passed (in time) that value. This guarantees that the WALCLK * register stays in sync with all handled HDA streams. * * @return true if the WALCLK register has been updated, false if not. * @param pThis HDA state. * @param u64WalClk Wall clock value to set WALCLK register to. * @param fForce Whether to force setting the wall clock value or not. */ bool hdaR3WalClkSet(PHDASTATE pThis, uint64_t u64WalClk, bool fForce) { const bool fFrontPassed = hdaR3StreamPeriodHasPassedAbsWalClk (&hdaR3GetStreamFromSink(pThis, &pThis->SinkFront)->State.Period, u64WalClk); const uint64_t u64FrontAbsWalClk = hdaR3StreamPeriodGetAbsElapsedWalClk(&hdaR3GetStreamFromSink(pThis, &pThis->SinkFront)->State.Period); # ifdef VBOX_WITH_AUDIO_HDA_51_SURROUND # error "Implement me!" # endif const bool fLineInPassed = hdaR3StreamPeriodHasPassedAbsWalClk (&hdaR3GetStreamFromSink(pThis, &pThis->SinkLineIn)->State.Period, u64WalClk); const uint64_t u64LineInAbsWalClk = hdaR3StreamPeriodGetAbsElapsedWalClk(&hdaR3GetStreamFromSink(pThis, &pThis->SinkLineIn)->State.Period); # ifdef VBOX_WITH_HDA_MIC_IN const bool fMicInPassed = hdaR3StreamPeriodHasPassedAbsWalClk (&hdaR3GetStreamFromSink(pThis, &pThis->SinkMicIn)->State.Period, u64WalClk); const uint64_t u64MicInAbsWalClk = hdaR3StreamPeriodGetAbsElapsedWalClk(&hdaR3GetStreamFromSink(pThis, &pThis->SinkMicIn)->State.Period); # endif # ifdef VBOX_STRICT const uint64_t u64WalClkCur = ASMAtomicReadU64(&pThis->u64WalClk); # endif /* Only drive the WALCLK register forward if all (active) stream periods have passed * the specified point in time given by u64WalClk. */ if ( ( fFrontPassed # ifdef VBOX_WITH_AUDIO_HDA_51_SURROUND # error "Implement me!" # endif && fLineInPassed # ifdef VBOX_WITH_HDA_MIC_IN && fMicInPassed # endif ) || fForce) { if (!fForce) { /* Get the maximum value of all periods we need to handle. * Not the most elegant solution, but works for now ... */ u64WalClk = RT_MAX(u64WalClk, u64FrontAbsWalClk); # ifdef VBOX_WITH_AUDIO_HDA_51_SURROUND # error "Implement me!" # endif u64WalClk = RT_MAX(u64WalClk, u64LineInAbsWalClk); # ifdef VBOX_WITH_HDA_MIC_IN u64WalClk = RT_MAX(u64WalClk, u64MicInAbsWalClk); # endif # ifdef VBOX_STRICT AssertMsg(u64WalClk >= u64WalClkCur, ("Setting WALCLK to a value going backwards does not make any sense (old %RU64 vs. new %RU64)\n", u64WalClkCur, u64WalClk)); if (u64WalClk == u64WalClkCur) /* Setting a stale value? */ { if (pThis->u8WalClkStaleCnt++ > 3) AssertMsgFailed(("Setting WALCLK to a stale value (%RU64) too often isn't a good idea really. " "Good luck with stuck audio stuff.\n", u64WalClk)); } else pThis->u8WalClkStaleCnt = 0; # endif } /* Set the new WALCLK value. */ ASMAtomicWriteU64(&pThis->u64WalClk, u64WalClk); } const uint64_t u64WalClkNew = hdaWalClkGetCurrent(pThis); Log3Func(("Cur: %RU64, New: %RU64 (force %RTbool) -> %RU64 %s\n", u64WalClkCur, u64WalClk, fForce, u64WalClkNew, u64WalClkNew == u64WalClk ? "[OK]" : "[DELAYED]")); return (u64WalClkNew == u64WalClk); } /** * Returns the default (mixer) sink from a given SD#. * Returns NULL if no sink is found. * * @return PHDAMIXERSINK * @param pThis HDA state. * @param uSD SD# to return mixer sink for. * NULL if not found / handled. */ PHDAMIXERSINK hdaR3GetDefaultSink(PHDASTATE pThis, uint8_t uSD) { if (hdaGetDirFromSD(uSD) == PDMAUDIODIR_IN) { const uint8_t uFirstSDI = 0; if (uSD == uFirstSDI) /* First SDI. */ return &pThis->SinkLineIn; # ifdef VBOX_WITH_AUDIO_HDA_MIC_IN if (uSD == uFirstSDI + 1) return &pThis->SinkMicIn; # else /* If we don't have a dedicated Mic-In sink, use the always present Line-In sink. */ return &pThis->SinkLineIn; # endif } else { const uint8_t uFirstSDO = HDA_MAX_SDI; if (uSD == uFirstSDO) return &pThis->SinkFront; # ifdef VBOX_WITH_AUDIO_HDA_51_SURROUND if (uSD == uFirstSDO + 1) return &pThis->SinkCenterLFE; if (uSD == uFirstSDO + 2) return &pThis->SinkRear; # endif } return NULL; } #endif /* IN_RING3 */ /** * Returns the audio direction of a specified stream descriptor. * * The register layout specifies that input streams (SDI) come first, * followed by the output streams (SDO). So every stream ID below HDA_MAX_SDI * is an input stream, whereas everything >= HDA_MAX_SDI is an output stream. * * Note: SDnFMT register does not provide that information, so we have to judge * for ourselves. * * @return Audio direction. */ PDMAUDIODIR hdaGetDirFromSD(uint8_t uSD) { AssertReturn(uSD < HDA_MAX_STREAMS, PDMAUDIODIR_UNKNOWN); if (uSD < HDA_MAX_SDI) return PDMAUDIODIR_IN; return PDMAUDIODIR_OUT; } /** * Returns the HDA stream of specified stream descriptor number. * * @return Pointer to HDA stream, or NULL if none found. */ PHDASTREAM hdaGetStreamFromSD(PHDASTATE pThis, uint8_t uSD) { AssertPtrReturn(pThis, NULL); AssertReturn(uSD < HDA_MAX_STREAMS, NULL); if (uSD >= HDA_MAX_STREAMS) { AssertMsgFailed(("Invalid / non-handled SD%RU8\n", uSD)); return NULL; } return &pThis->aStreams[uSD]; } #ifdef IN_RING3 /** * Returns the HDA stream of specified HDA sink. * * @return Pointer to HDA stream, or NULL if none found. */ PHDASTREAM hdaR3GetStreamFromSink(PHDASTATE pThis, PHDAMIXERSINK pSink) { AssertPtrReturn(pThis, NULL); AssertPtrReturn(pSink, NULL); /** @todo Do something with the channel mapping here? */ return pSink->pStream; } /** * Reads DMA data from a given HDA output stream. * * @return IPRT status code. * @param pThis HDA state. * @param pStream HDA output stream to read DMA data from. * @param pvBuf Where to store the read data. * @param cbBuf How much to read in bytes. * @param pcbRead Returns read bytes from DMA. Optional. */ int hdaR3DMARead(PHDASTATE pThis, PHDASTREAM pStream, void *pvBuf, uint32_t cbBuf, uint32_t *pcbRead) { AssertPtrReturn(pThis, VERR_INVALID_POINTER); AssertPtrReturn(pStream, VERR_INVALID_POINTER); /* pcbRead is optional. */ PHDABDLE pBDLE = &pStream->State.BDLE; int rc = VINF_SUCCESS; uint32_t cbReadTotal = 0; uint32_t cbLeft = RT_MIN(cbBuf, pBDLE->Desc.u32BufSize - pBDLE->State.u32BufOff); # ifdef HDA_DEBUG_SILENCE uint64_t csSilence = 0; pStream->Dbg.cSilenceThreshold = 100; pStream->Dbg.cbSilenceReadMin = _1M; # endif RTGCPHYS addrChunk = pBDLE->Desc.u64BufAddr + pBDLE->State.u32BufOff; while (cbLeft) { uint32_t cbChunk = RT_MIN(cbLeft, pStream->u16FIFOS); rc = PDMDevHlpPhysRead(pThis->CTX_SUFF(pDevIns), addrChunk, (uint8_t *)pvBuf + cbReadTotal, cbChunk); if (RT_FAILURE(rc)) break; # ifdef HDA_DEBUG_SILENCE uint16_t *pu16Buf = (uint16_t *)pvBuf; for (size_t i = 0; i < cbChunk / sizeof(uint16_t); i++) { if (*pu16Buf == 0) csSilence++; else break; pu16Buf++; } # endif if (pStream->Dbg.Runtime.fEnabled) DrvAudioHlpFileWrite(pStream->Dbg.Runtime.pFileDMARaw, (uint8_t *)pvBuf + cbReadTotal, cbChunk, 0 /* fFlags */); STAM_COUNTER_ADD(&pThis->StatBytesRead, cbChunk); addrChunk = (addrChunk + cbChunk) % pBDLE->Desc.u32BufSize; Assert(cbLeft >= cbChunk); cbLeft -= cbChunk; cbReadTotal += cbChunk; } # ifdef HDA_DEBUG_SILENCE if (csSilence) pStream->Dbg.csSilence += csSilence; if ( csSilence == 0 && pStream->Dbg.csSilence > pStream->Dbg.cSilenceThreshold && pStream->Dbg.cbReadTotal >= pStream->Dbg.cbSilenceReadMin) { LogFunc(("Silent block detected: %RU64 audio samples\n", pStream->Dbg.csSilence)); pStream->Dbg.csSilence = 0; } # endif if (RT_SUCCESS(rc)) { if (pcbRead) *pcbRead = cbReadTotal; } return rc; } /** * Writes audio data from an HDA input stream's FIFO to its associated DMA area. * * @return IPRT status code. * @param pThis HDA state. * @param pStream HDA input stream to write audio data to. * @param pvBuf Data to write. * @param cbBuf How much (in bytes) to write. * @param pcbWritten Returns written bytes on success. Optional. */ int hdaR3DMAWrite(PHDASTATE pThis, PHDASTREAM pStream, const void *pvBuf, uint32_t cbBuf, uint32_t *pcbWritten) { AssertPtrReturn(pThis, VERR_INVALID_POINTER); AssertPtrReturn(pStream, VERR_INVALID_POINTER); /* pcbWritten is optional. */ PHDABDLE pBDLE = &pStream->State.BDLE; int rc = VINF_SUCCESS; uint32_t cbWrittenTotal = 0; uint32_t cbLeft = RT_MIN(cbBuf, pBDLE->Desc.u32BufSize - pBDLE->State.u32BufOff); RTGCPHYS addrChunk = pBDLE->Desc.u64BufAddr + pBDLE->State.u32BufOff; while (cbLeft) { uint32_t cbChunk = RT_MIN(cbLeft, pStream->u16FIFOS); /* Sanity checks. */ Assert(cbChunk <= pBDLE->Desc.u32BufSize - pBDLE->State.u32BufOff); if (pStream->Dbg.Runtime.fEnabled) DrvAudioHlpFileWrite(pStream->Dbg.Runtime.pFileDMARaw, (uint8_t *)pvBuf + cbWrittenTotal, cbChunk, 0 /* fFlags */); rc = PDMDevHlpPCIPhysWrite(pThis->CTX_SUFF(pDevIns), addrChunk, (uint8_t *)pvBuf + cbWrittenTotal, cbChunk); if (RT_FAILURE(rc)) break; STAM_COUNTER_ADD(&pThis->StatBytesWritten, cbChunk); addrChunk = (addrChunk + cbChunk) % pBDLE->Desc.u32BufSize; Assert(cbLeft >= cbChunk); cbLeft -= (uint32_t)cbChunk; cbWrittenTotal += (uint32_t)cbChunk; } if (RT_SUCCESS(rc)) { if (pcbWritten) *pcbWritten = cbWrittenTotal; } else LogFunc(("Failed with %Rrc\n", rc)); return rc; } #endif /* IN_RING3 */ /** * Returns a new INTSTS value based on the current device state. * * @returns Determined INTSTS register value. * @param pThis HDA state. * * @remark This function does *not* set INTSTS! */ uint32_t hdaGetINTSTS(PHDASTATE pThis) { uint32_t intSts = 0; /* Check controller interrupts (RIRB, STATEST). */ if (HDA_REG(pThis, RIRBSTS) & HDA_REG(pThis, RIRBCTL) & (HDA_RIRBCTL_ROIC | HDA_RIRBCTL_RINTCTL)) { intSts |= HDA_INTSTS_CIS; /* Set the Controller Interrupt Status (CIS). */ } /* Check SDIN State Change Status Flags. */ if (HDA_REG(pThis, STATESTS) & HDA_REG(pThis, WAKEEN)) { intSts |= HDA_INTSTS_CIS; /* Touch Controller Interrupt Status (CIS). */ } /* For each stream, check if any interrupt status bit is set and enabled. */ for (uint8_t iStrm = 0; iStrm < HDA_MAX_STREAMS; ++iStrm) { if (HDA_STREAM_REG(pThis, STS, iStrm) & HDA_STREAM_REG(pThis, CTL, iStrm) & (HDA_SDCTL_DEIE | HDA_SDCTL_FEIE | HDA_SDCTL_IOCE)) { Log3Func(("[SD%d] interrupt status set\n", iStrm)); intSts |= RT_BIT(iStrm); } } if (intSts) intSts |= HDA_INTSTS_GIS; /* Set the Global Interrupt Status (GIS). */ Log3Func(("-> 0x%x\n", intSts)); return intSts; } #ifdef IN_RING3 /** * Converts an HDA stream's SDFMT register into a given PCM properties structure. * * @return IPRT status code. * @param u16SDFMT The HDA stream's SDFMT value to convert. * @param pProps PCM properties structure to hold converted result on success. */ int hdaR3SDFMTToPCMProps(uint16_t u16SDFMT, PPDMAUDIOPCMPROPS pProps) { AssertPtrReturn(pProps, VERR_INVALID_POINTER); # define EXTRACT_VALUE(v, mask, shift) ((v & ((mask) << (shift))) >> (shift)) int rc = VINF_SUCCESS; uint32_t u32Hz = EXTRACT_VALUE(u16SDFMT, HDA_SDFMT_BASE_RATE_MASK, HDA_SDFMT_BASE_RATE_SHIFT) ? 44100 : 48000; uint32_t u32HzMult = 1; uint32_t u32HzDiv = 1; switch (EXTRACT_VALUE(u16SDFMT, HDA_SDFMT_MULT_MASK, HDA_SDFMT_MULT_SHIFT)) { case 0: u32HzMult = 1; break; case 1: u32HzMult = 2; break; case 2: u32HzMult = 3; break; case 3: u32HzMult = 4; break; default: LogFunc(("Unsupported multiplier %x\n", EXTRACT_VALUE(u16SDFMT, HDA_SDFMT_MULT_MASK, HDA_SDFMT_MULT_SHIFT))); rc = VERR_NOT_SUPPORTED; break; } switch (EXTRACT_VALUE(u16SDFMT, HDA_SDFMT_DIV_MASK, HDA_SDFMT_DIV_SHIFT)) { case 0: u32HzDiv = 1; break; case 1: u32HzDiv = 2; break; case 2: u32HzDiv = 3; break; case 3: u32HzDiv = 4; break; case 4: u32HzDiv = 5; break; case 5: u32HzDiv = 6; break; case 6: u32HzDiv = 7; break; case 7: u32HzDiv = 8; break; default: LogFunc(("Unsupported divisor %x\n", EXTRACT_VALUE(u16SDFMT, HDA_SDFMT_DIV_MASK, HDA_SDFMT_DIV_SHIFT))); rc = VERR_NOT_SUPPORTED; break; } uint8_t cBytes = 0; switch (EXTRACT_VALUE(u16SDFMT, HDA_SDFMT_BITS_MASK, HDA_SDFMT_BITS_SHIFT)) { case 0: cBytes = 1; break; case 1: cBytes = 2; break; case 4: cBytes = 4; break; default: AssertMsgFailed(("Unsupported bits per sample %x\n", EXTRACT_VALUE(u16SDFMT, HDA_SDFMT_BITS_MASK, HDA_SDFMT_BITS_SHIFT))); rc = VERR_NOT_SUPPORTED; break; } if (RT_SUCCESS(rc)) { RT_BZERO(pProps, sizeof(PDMAUDIOPCMPROPS)); pProps->cBytes = cBytes; pProps->fSigned = true; pProps->cChannels = (u16SDFMT & 0xf) + 1; pProps->uHz = u32Hz * u32HzMult / u32HzDiv; pProps->cShift = PDMAUDIOPCMPROPS_MAKE_SHIFT_PARMS(pProps->cBytes, pProps->cChannels); } # undef EXTRACT_VALUE return rc; } # ifdef LOG_ENABLED void hdaR3BDLEDumpAll(PHDASTATE pThis, uint64_t u64BDLBase, uint16_t cBDLE) { LogFlowFunc(("BDLEs @ 0x%x (%RU16):\n", u64BDLBase, cBDLE)); if (!u64BDLBase) return; uint32_t cbBDLE = 0; for (uint16_t i = 0; i < cBDLE; i++) { HDABDLEDESC bd; PDMDevHlpPhysRead(pThis->CTX_SUFF(pDevIns), u64BDLBase + i * sizeof(HDABDLEDESC), &bd, sizeof(bd)); LogFunc(("\t#%03d BDLE(adr:0x%llx, size:%RU32, ioc:%RTbool)\n", i, bd.u64BufAddr, bd.u32BufSize, bd.fFlags & HDA_BDLE_FLAG_IOC)); cbBDLE += bd.u32BufSize; } LogFlowFunc(("Total: %RU32 bytes\n", cbBDLE)); if (!pThis->u64DPBase) /* No DMA base given? Bail out. */ return; LogFlowFunc(("DMA counters:\n")); for (int i = 0; i < cBDLE; i++) { uint32_t uDMACnt; PDMDevHlpPhysRead(pThis->CTX_SUFF(pDevIns), (pThis->u64DPBase & DPBASE_ADDR_MASK) + (i * 2 * sizeof(uint32_t)), &uDMACnt, sizeof(uDMACnt)); LogFlowFunc(("\t#%03d DMA @ 0x%x\n", i , uDMACnt)); } } # endif /* LOG_ENABLED */ /** * Fetches a Bundle Descriptor List Entry (BDLE) from the DMA engine. * * @param pThis Pointer to HDA state. * @param pBDLE Where to store the fetched result. * @param u64BaseDMA Address base of DMA engine to use. * @param u16Entry BDLE entry to fetch. */ int hdaR3BDLEFetch(PHDASTATE pThis, PHDABDLE pBDLE, uint64_t u64BaseDMA, uint16_t u16Entry) { AssertPtrReturn(pThis, VERR_INVALID_POINTER); AssertPtrReturn(pBDLE, VERR_INVALID_POINTER); AssertReturn(u64BaseDMA, VERR_INVALID_PARAMETER); if (!u64BaseDMA) { LogRel2(("HDA: Unable to fetch BDLE #%RU16 - no base DMA address set (yet)\n", u16Entry)); return VERR_NOT_FOUND; } /** @todo Compare u16Entry with LVI. */ int rc = PDMDevHlpPhysRead(pThis->CTX_SUFF(pDevIns), u64BaseDMA + (u16Entry * sizeof(HDABDLEDESC)), &pBDLE->Desc, sizeof(pBDLE->Desc)); if (RT_SUCCESS(rc)) { /* Reset internal state. */ RT_ZERO(pBDLE->State); pBDLE->State.u32BDLIndex = u16Entry; } Log3Func(("Entry #%d @ 0x%x: %R[bdle], rc=%Rrc\n", u16Entry, u64BaseDMA + (u16Entry * sizeof(HDABDLEDESC)), pBDLE, rc)); return VINF_SUCCESS; } /** * Tells whether a given BDLE is complete or not. * * @return true if BDLE is complete, false if not. * @param pBDLE BDLE to retrieve status for. */ bool hdaR3BDLEIsComplete(PHDABDLE pBDLE) { bool fIsComplete = false; if ( !pBDLE->Desc.u32BufSize /* There can be BDLEs with 0 size. */ || (pBDLE->State.u32BufOff >= pBDLE->Desc.u32BufSize)) { Assert(pBDLE->State.u32BufOff == pBDLE->Desc.u32BufSize); fIsComplete = true; } Log3Func(("%R[bdle] => %s\n", pBDLE, fIsComplete ? "COMPLETE" : "INCOMPLETE")); return fIsComplete; } /** * Tells whether a given BDLE needs an interrupt or not. * * @return true if BDLE needs an interrupt, false if not. * @param pBDLE BDLE to retrieve status for. */ bool hdaR3BDLENeedsInterrupt(PHDABDLE pBDLE) { return (pBDLE->Desc.fFlags & HDA_BDLE_FLAG_IOC); } /** * Sets the virtual device timer to a new expiration time. * * @returns Whether the new expiration time was set or not. * @param pThis HDA state. * @param pStream HDA stream to set timer for. * @param tsExpire New (virtual) expiration time to set. * @param fForce Whether to force setting the expiration time or not. * * @remark This function takes all active HDA streams and their * current timing into account. This is needed to make sure * that all streams can match their needed timing. * * To achieve this, the earliest (lowest) timestamp of all * active streams found will be used for the next scheduling slot. * * Forcing a new expiration time will override the above mechanism. */ bool hdaR3TimerSet(PHDASTATE pThis, PHDASTREAM pStream, uint64_t tsExpire, bool fForce) { AssertPtrReturn(pThis, false); AssertPtrReturn(pStream, false); uint64_t tsExpireMin = tsExpire; if (!fForce) { if (hdaR3StreamTransferIsScheduled(pStream)) tsExpireMin = RT_MIN(tsExpireMin, hdaR3StreamTransferGetNext(pStream)); } AssertPtr(pThis->pTimer[pStream->u8SD]); const uint64_t tsNow = TMTimerGet(pThis->pTimer[pStream->u8SD]); /* * Make sure to not go backwards in time, as this will assert in TMTimerSet(). * This in theory could happen in hdaR3StreamTransferGetNext() from above. */ if (tsExpireMin < tsNow) tsExpireMin = tsNow; int rc = TMTimerSet(pThis->pTimer[pStream->u8SD], tsExpireMin); AssertRC(rc); return RT_SUCCESS(rc); } #endif /* IN_RING3 */