/* $Id: DevPciIch9.cpp 57781 2015-09-16 11:35:28Z vboxsync $ */ /** @file * DevPCI - ICH9 southbridge PCI bus emulation device. * * @note bird: I've cleaned up DevPCI.cpp to some extend, this file has not * be cleaned up and because of pending code merge. */ /* * Copyright (C) 2010-2015 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_PCI /* Hack to get PCIDEVICEINT declared at the right point - include "PCIInternal.h". */ #define PCI_INCLUDE_PRIVATE #define PCIBus ICH9PCIBus #include #include #include #include #include #include #ifdef IN_RING3 #include #endif #include "VBoxDD.h" #include "MsiCommon.h" /********************************************************************************************************************************* * Structures and Typedefs * *********************************************************************************************************************************/ /** * PCI Bus instance. */ typedef struct ICH9PCIBus { /** Bus number. */ int32_t iBus; /** Number of bridges attached to the bus. */ uint32_t cBridges; /** Array of PCI devices. We assume 32 slots, each with 8 functions. */ R3PTRTYPE(PPCIDEVICE) apDevices[256]; /** Array of bridges attached to the bus. */ R3PTRTYPE(PPCIDEVICE *) papBridgesR3; /** R3 pointer to the device instance. */ PPDMDEVINSR3 pDevInsR3; /** Pointer to the PCI R3 helpers. */ PCPDMPCIHLPR3 pPciHlpR3; /** R0 pointer to the device instance. */ PPDMDEVINSR0 pDevInsR0; /** Pointer to the PCI R0 helpers. */ PCPDMPCIHLPR0 pPciHlpR0; /** RC pointer to the device instance. */ PPDMDEVINSRC pDevInsRC; /** Pointer to the PCI RC helpers. */ PCPDMPCIHLPRC pPciHlpRC; /** The PCI device for the PCI bridge. */ PCIDEVICE aPciDev; } ICH9PCIBUS, *PICH9PCIBUS; /** @def PCI_APIC_IRQ_PINS * Number of pins for interrupts if the APIC is used. */ #define PCI_APIC_IRQ_PINS 8 /** * PCI Globals - This is the host-to-pci bridge and the root bus. */ typedef struct { /** R3 pointer to the device instance. */ PPDMDEVINSR3 pDevInsR3; /** R0 pointer to the device instance. */ PPDMDEVINSR0 pDevInsR0; /** RC pointer to the device instance. */ PPDMDEVINSRC pDevInsRC; #if HC_ARCH_BITS == 64 uint32_t Alignment0; #endif /** Value latched in Configuration Address Port (0CF8h) */ uint32_t uConfigReg; /** I/O APIC irq levels */ volatile uint32_t uaPciApicIrqLevels[PCI_APIC_IRQ_PINS]; #if 1 /* Will be moved into the BIOS soon. */ /** The next I/O port address which the PCI BIOS will use. */ uint32_t uPciBiosIo; /** The next MMIO address which the PCI BIOS will use. */ uint32_t uPciBiosMmio; /** Actual bus number. */ uint8_t uBus; #endif /** Physical address of PCI config space MMIO region. */ uint64_t u64PciConfigMMioAddress; /** Length of PCI config space MMIO region. */ uint64_t u64PciConfigMMioLength; /** PCI bus which is attached to the host-to-PCI bridge. */ ICH9PCIBUS aPciBus; } ICH9PCIGLOBALS, *PICH9PCIGLOBALS; /** * PCI configuration space address. */ typedef struct { uint8_t iBus; uint8_t iDeviceFunc; uint16_t iRegister; } PciAddress; #ifndef VBOX_DEVICE_STRUCT_TESTCASE /********************************************************************************************************************************* * Defined Constants And Macros * *********************************************************************************************************************************/ /** @def VBOX_ICH9PCI_SAVED_STATE_VERSION * Saved state version of the ICH9 PCI bus device. */ #define VBOX_ICH9PCI_SAVED_STATE_VERSION_NOMSI 1 #define VBOX_ICH9PCI_SAVED_STATE_VERSION_MSI 2 #define VBOX_ICH9PCI_SAVED_STATE_VERSION_CURRENT VBOX_ICH9PCI_SAVED_STATE_VERSION_MSI /** Converts a bus instance pointer to a device instance pointer. */ #define PCIBUS_2_DEVINS(pPciBus) ((pPciBus)->CTX_SUFF(pDevIns)) /** Converts a device instance pointer to a ICH9PCIGLOBALS pointer. */ #define DEVINS_2_PCIGLOBALS(pDevIns) ((PICH9PCIGLOBALS)(PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS))) /** Converts a device instance pointer to a PCIBUS pointer. */ #define DEVINS_2_PCIBUS(pDevIns) ((PICH9PCIBUS)(&PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS)->aPciBus)) /** Converts a pointer to a PCI root bus instance to a PCIGLOBALS pointer. */ #define PCIROOTBUS_2_PCIGLOBALS(pPciBus) ( (PICH9PCIGLOBALS)((uintptr_t)(pPciBus) - RT_OFFSETOF(ICH9PCIGLOBALS, aPciBus)) ) /** @def PCI_LOCK * Acquires the PDM lock. This is a NOP if locking is disabled. */ /** @def PCI_UNLOCK * Releases the PDM lock. This is a NOP if locking is disabled. */ #define PCI_LOCK(pDevIns, rc) \ do { \ int rc2 = DEVINS_2_PCIBUS(pDevIns)->CTX_SUFF(pPciHlp)->pfnLock((pDevIns), rc); \ if (rc2 != VINF_SUCCESS) \ return rc2; \ } while (0) #define PCI_UNLOCK(pDevIns) \ DEVINS_2_PCIBUS(pDevIns)->CTX_SUFF(pPciHlp)->pfnUnlock(pDevIns) /* Prototypes */ static void ich9pciSetIrqInternal(PICH9PCIGLOBALS pGlobals, uint8_t uDevFn, PPCIDEVICE pPciDev, int iIrq, int iLevel, uint32_t uTagSrc); #ifdef IN_RING3 static void ich9pcibridgeReset(PPDMDEVINS pDevIns); static int ich9pciRegisterInternal(PICH9PCIBUS pBus, int iDev, PPCIDEVICE pPciDev, const char *pszName); static void ich9pciUpdateMappings(PCIDevice *pDev); static DECLCALLBACK(uint32_t) ich9pciConfigReadDev(PCIDevice *aDev, uint32_t u32Address, unsigned len); DECLINLINE(PPCIDEVICE) ich9pciFindBridge(PICH9PCIBUS pBus, uint8_t iBus); static void ich9pciBiosInitDevice(PICH9PCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn); #endif // See 7.2.2. PCI Express Enhanced Configuration Mechanism for details of address // mapping, we take n=6 approach DECLINLINE(void) ich9pciPhysToPciAddr(PICH9PCIGLOBALS pGlobals, RTGCPHYS GCPhysAddr, PciAddress* pPciAddr) { NOREF(pGlobals); pPciAddr->iBus = (GCPhysAddr >> 20) & ((1<<6) - 1); pPciAddr->iDeviceFunc = (GCPhysAddr >> 12) & ((1<<(5+3)) - 1); // 5 bits - device, 3 bits - function pPciAddr->iRegister = (GCPhysAddr >> 0) & ((1<<(6+4+2)) - 1); // 6 bits - register, 4 bits - extended register, 2 bits -Byte Enable } DECLINLINE(void) ich9pciStateToPciAddr(PICH9PCIGLOBALS pGlobals, RTGCPHYS addr, PciAddress* pPciAddr) { pPciAddr->iBus = (pGlobals->uConfigReg >> 16) & 0xff; pPciAddr->iDeviceFunc = (pGlobals->uConfigReg >> 8) & 0xff; pPciAddr->iRegister = (pGlobals->uConfigReg & 0xfc) | (addr & 3); } PDMBOTHCBDECL(void) ich9pciSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel, uint32_t uTagSrc) { LogFlowFunc(("invoked by %p/%d: iIrq=%d iLevel=%d uTagSrc=%#x\n", pDevIns, pDevIns->iInstance, iIrq, iLevel, uTagSrc)); ich9pciSetIrqInternal(PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS), pPciDev->devfn, pPciDev, iIrq, iLevel, uTagSrc); } PDMBOTHCBDECL(void) ich9pcibridgeSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel, uint32_t uTagSrc) { /* * The PCI-to-PCI bridge specification defines how the interrupt pins * are routed from the secondary to the primary bus (see chapter 9). * iIrq gives the interrupt pin the pci device asserted. * We change iIrq here according to the spec and call the SetIrq function * of our parent passing the device which asserted the interrupt instead of the device of the bridge. */ PICH9PCIBUS pBus = PDMINS_2_DATA(pDevIns, PICH9PCIBUS); PPCIDEVICE pPciDevBus = pPciDev; int iIrqPinBridge = iIrq; uint8_t uDevFnBridge = 0; /* Walk the chain until we reach the host bus. */ do { uDevFnBridge = pBus->aPciDev.devfn; iIrqPinBridge = ((pPciDevBus->devfn >> 3) + iIrqPinBridge) & 3; /* Get the parent. */ pBus = pBus->aPciDev.Int.s.CTX_SUFF(pBus); pPciDevBus = &pBus->aPciDev; } while (pBus->iBus != 0); AssertMsgReturnVoid(pBus->iBus == 0, ("This is not the host pci bus iBus=%d\n", pBus->iBus)); ich9pciSetIrqInternal(PCIROOTBUS_2_PCIGLOBALS(pBus), uDevFnBridge, pPciDev, iIrqPinBridge, iLevel, uTagSrc); } /** * Port I/O Handler for PCI address OUT operations. * * Emulates writes to Configuration Address Port at 0CF8h for * Configuration Mechanism #1. * * @returns VBox status code. * * @param pDevIns ICH9 device instance. * @param pvUser User argument - ignored. * @param uPort Port number used for the OUT operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) ich9pciIOPortAddressWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { LogFlow(("ich9pciIOPortAddressWrite: Port=%#x u32=%#x cb=%d\n", Port, u32, cb)); NOREF(pvUser); if (cb == 4) { PICH9PCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); /* * bits [1:0] are hard-wired, read-only and must return zeroes * when read. */ u32 &= ~3; PCI_LOCK(pDevIns, VINF_IOM_R3_IOPORT_WRITE); pThis->uConfigReg = u32; PCI_UNLOCK(pDevIns); } return VINF_SUCCESS; } /** * Port I/O Handler for PCI address IN operations. * * Emulates reads from Configuration Address Port at 0CF8h for * Configuration Mechanism #1. * * @returns VBox status code. * * @param pDevIns ICH9 device instance. * @param pvUser User argument - ignored. * @param uPort Port number used for the IN operation. * @param pu32 Where to store the result. * @param cb Number of bytes read. */ PDMBOTHCBDECL(int) ich9pciIOPortAddressRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { NOREF(pvUser); if (cb == 4) { PICH9PCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); PCI_LOCK(pDevIns, VINF_IOM_R3_IOPORT_READ); *pu32 = pThis->uConfigReg; PCI_UNLOCK(pDevIns); LogFlow(("ich9pciIOPortAddressRead: Port=%#x cb=%d -> %#x\n", Port, cb, *pu32)); return VINF_SUCCESS; } Log(("ich9pciIOPortAddressRead: Port=%#x cb=%d VERR_IOM_IOPORT_UNUSED\n", Port, cb)); return VERR_IOM_IOPORT_UNUSED; } /* * Perform configuration space write. */ static int ich9pciDataWriteAddr(PICH9PCIGLOBALS pGlobals, PciAddress* pAddr, uint32_t val, int cb, int rcReschedule) { int rc = VINF_SUCCESS; #ifdef IN_RING3 NOREF(rcReschedule); #endif if (pAddr->iBus != 0) /* forward to subordinate bus */ { if (pGlobals->aPciBus.cBridges) { #ifdef IN_RING3 /** @todo do lookup in R0/RC too! */ PPCIDEVICE pBridgeDevice = ich9pciFindBridge(&pGlobals->aPciBus, pAddr->iBus); if (pBridgeDevice) { AssertPtr(pBridgeDevice->Int.s.pfnBridgeConfigWrite); pBridgeDevice->Int.s.pfnBridgeConfigWrite(pBridgeDevice->pDevIns, pAddr->iBus, pAddr->iDeviceFunc, pAddr->iRegister, val, cb); } #else rc = rcReschedule; #endif } } else /* forward to directly connected device */ { R3PTRTYPE(PCIDevice *) aDev = pGlobals->aPciBus.apDevices[pAddr->iDeviceFunc]; if (aDev) { #ifdef IN_RING3 aDev->Int.s.pfnConfigWrite(aDev, pAddr->iRegister, val, cb); #else rc = rcReschedule; #endif } } Log2(("ich9pciDataWriteAddr: %02x:%02x:%02x reg %x(%d) %x %Rrc\n", pAddr->iBus, pAddr->iDeviceFunc >> 3, pAddr->iDeviceFunc & 0x7, pAddr->iRegister, cb, val, rc)); return rc; } /* * Decode value latched in Configuration Address Port and perform * requsted write to the target configuration space register. * * XXX: This code should be probably moved to its only caller * (ich9pciIOPortDataWrite) to avoid prolifiration of confusingly * similarly named functions. */ static int ich9pciDataWrite(PICH9PCIGLOBALS pGlobals, uint32_t addr, uint32_t val, int len) { LogFlow(("ich9pciDataWrite: config=%08x val=%08x len=%d\n", pGlobals->uConfigReg, val, len)); /* Configuration space mapping enabled? */ if (!(pGlobals->uConfigReg & (1 << 31))) return VINF_SUCCESS; /* Decode target device and configuration space register */ PciAddress aPciAddr; ich9pciStateToPciAddr(pGlobals, addr, &aPciAddr); /* Perform configuration space write */ return ich9pciDataWriteAddr(pGlobals, &aPciAddr, val, len, VINF_IOM_R3_IOPORT_WRITE); } /** * Port I/O Handler for PCI data OUT operations. * * Emulates writes to Configuration Data Port at 0CFCh for * Configuration Mechanism #1. * * @returns VBox status code. * * @param pDevIns ICH9 device instance. * @param pvUser User argument - ignored. * @param uPort Port number used for the OUT operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) ich9pciIOPortDataWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { LogFlow(("ich9pciIOPortDataWrite: Port=%#x u32=%#x cb=%d\n", Port, u32, cb)); NOREF(pvUser); int rc = VINF_SUCCESS; if (!(Port % cb)) { PICH9PCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); PCI_LOCK(pDevIns, VINF_IOM_R3_IOPORT_WRITE); rc = ich9pciDataWrite(pThis, Port, u32, cb); PCI_UNLOCK(pDevIns); } else AssertMsgFailed(("Unaligned write to port %#x u32=%#x cb=%d\n", Port, u32, cb)); return rc; } static void ich9pciNoMem(void* ptr, int cb) { for (int i = 0; i < cb; i++) ((uint8_t*)ptr)[i] = 0xff; } /* * Perform configuration space read. */ static int ich9pciDataReadAddr(PICH9PCIGLOBALS pGlobals, PciAddress* pPciAddr, int cb, uint32_t *pu32, int rcReschedule) { int rc = VINF_SUCCESS; #ifdef IN_RING3 NOREF(rcReschedule); #endif if (pPciAddr->iBus != 0) /* forward to subordinate bus */ { if (pGlobals->aPciBus.cBridges) { #ifdef IN_RING3 /** @todo do lookup in R0/RC too! */ PPCIDEVICE pBridgeDevice = ich9pciFindBridge(&pGlobals->aPciBus, pPciAddr->iBus); if (pBridgeDevice) { AssertPtr(pBridgeDevice->Int.s.pfnBridgeConfigRead); *pu32 = pBridgeDevice->Int.s.pfnBridgeConfigRead(pBridgeDevice->pDevIns, pPciAddr->iBus, pPciAddr->iDeviceFunc, pPciAddr->iRegister, cb); } else ich9pciNoMem(pu32, cb); #else rc = rcReschedule; #endif } else ich9pciNoMem(pu32, cb); } else /* forward to directly connected device */ { R3PTRTYPE(PCIDevice *) aDev = pGlobals->aPciBus.apDevices[pPciAddr->iDeviceFunc]; if (aDev) { #ifdef IN_RING3 *pu32 = aDev->Int.s.pfnConfigRead(aDev, pPciAddr->iRegister, cb); #else rc = rcReschedule; #endif } else ich9pciNoMem(pu32, cb); } Log3(("ich9pciDataReadAddr: %02x:%02x:%02x reg %x(%d) gave %x %Rrc\n", pPciAddr->iBus, pPciAddr->iDeviceFunc >> 3, pPciAddr->iDeviceFunc & 0x7, pPciAddr->iRegister, cb, *pu32, rc)); return rc; } /* * Decode value latched in Configuration Address Port and perform * requsted read from the target configuration space register. * * XXX: This code should be probably moved to its only caller * (ich9pciIOPortDataRead) to avoid prolifiration of confusingly * similarly named functions. */ static int ich9pciDataRead(PICH9PCIGLOBALS pGlobals, uint32_t addr, int cb, uint32_t *pu32) { LogFlow(("ich9pciDataRead: config=%x cb=%d\n", pGlobals->uConfigReg, cb)); *pu32 = 0xffffffff; /* Configuration space mapping enabled? */ if (!(pGlobals->uConfigReg & (1 << 31))) return VINF_SUCCESS; /* Decode target device and configuration space register */ PciAddress aPciAddr; ich9pciStateToPciAddr(pGlobals, addr, &aPciAddr); /* Perform configuration space read */ return ich9pciDataReadAddr(pGlobals, &aPciAddr, cb, pu32, VINF_IOM_R3_IOPORT_READ); } /** * Port I/O Handler for PCI data IN operations. * * Emulates reads from Configuration Data Port at 0CFCh for * Configuration Mechanism #1. * * @returns VBox status code. * * @param pDevIns ICH9 device instance. * @param pvUser User argument - ignored. * @param uPort Port number used for the IN operation. * @param pu32 Where to store the result. * @param cb Number of bytes read. */ PDMBOTHCBDECL(int) ich9pciIOPortDataRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { NOREF(pvUser); if (!(Port % cb)) { PICH9PCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); PCI_LOCK(pDevIns, VINF_IOM_R3_IOPORT_READ); int rc = ich9pciDataRead(pThis, Port, cb, pu32); PCI_UNLOCK(pDevIns); LogFlow(("ich9pciIOPortDataRead: Port=%#x cb=%#x -> %#x (%Rrc)\n", Port, cb, *pu32, rc)); return rc; } AssertMsgFailed(("Unaligned read from port %#x cb=%d\n", Port, cb)); return VERR_IOM_IOPORT_UNUSED; } /* Compute mapping of PCI slot and IRQ number to APIC interrupt line */ DECLINLINE(int) ich9pciSlot2ApicIrq(uint8_t uSlot, int irq_num) { return (irq_num + uSlot) & 7; } /* return the global irq number corresponding to a given device irq pin. We could also use the bus number to have a more precise mapping. This is the implementation note described in the PCI spec chapter 2.2.6 */ DECLINLINE(int) ich9pciSlotGetPirq(uint8_t uBus, uint8_t uDevFn, int iIrqNum) { NOREF(uBus); int iSlotAddend = (uDevFn >> 3) - 1; return (iIrqNum + iSlotAddend) & 3; } /* irqs corresponding to PCI irqs A-D, must match pci_irq_list in rombios.c */ static const uint8_t aPciIrqs[4] = { 11, 10, 9, 5 }; /* Add one more level up request on APIC input line */ DECLINLINE(void) ich9pciApicLevelUp(PICH9PCIGLOBALS pGlobals, int irq_num) { ASMAtomicIncU32(&pGlobals->uaPciApicIrqLevels[irq_num]); } /* Remove one level up request on APIC input line */ DECLINLINE(void) ich9pciApicLevelDown(PICH9PCIGLOBALS pGlobals, int irq_num) { ASMAtomicDecU32(&pGlobals->uaPciApicIrqLevels[irq_num]); } static void ich9pciApicSetIrq(PICH9PCIBUS pBus, uint8_t uDevFn, PCIDevice *pPciDev, int irq_num1, int iLevel, uint32_t uTagSrc, int iForcedIrq) { /* This is only allowed to be called with a pointer to the root bus. */ AssertMsg(pBus->iBus == 0, ("iBus=%u\n", pBus->iBus)); if (iForcedIrq == -1) { int apic_irq, apic_level; PICH9PCIGLOBALS pGlobals = PCIROOTBUS_2_PCIGLOBALS(pBus); int irq_num = ich9pciSlot2ApicIrq(uDevFn >> 3, irq_num1); if ((iLevel & PDM_IRQ_LEVEL_HIGH) == PDM_IRQ_LEVEL_HIGH) ich9pciApicLevelUp(pGlobals, irq_num); else if ((iLevel & PDM_IRQ_LEVEL_HIGH) == PDM_IRQ_LEVEL_LOW) ich9pciApicLevelDown(pGlobals, irq_num); apic_irq = irq_num + 0x10; apic_level = pGlobals->uaPciApicIrqLevels[irq_num] != 0; Log3(("ich9pciApicSetIrq: %s: irq_num1=%d level=%d apic_irq=%d apic_level=%d irq_num1=%d uTagSrc=%#x\n", R3STRING(pPciDev->name), irq_num1, iLevel, apic_irq, apic_level, irq_num, uTagSrc)); pBus->CTX_SUFF(pPciHlp)->pfnIoApicSetIrq(pBus->CTX_SUFF(pDevIns), apic_irq, apic_level, uTagSrc); if ((iLevel & PDM_IRQ_LEVEL_FLIP_FLOP) == PDM_IRQ_LEVEL_FLIP_FLOP) { /* * we raised it few lines above, as PDM_IRQ_LEVEL_FLIP_FLOP has * PDM_IRQ_LEVEL_HIGH bit set */ ich9pciApicLevelDown(pGlobals, irq_num); pPciDev->Int.s.uIrqPinState = PDM_IRQ_LEVEL_LOW; apic_level = pGlobals->uaPciApicIrqLevels[irq_num] != 0; Log3(("ich9pciApicSetIrq: %s: irq_num1=%d level=%d apic_irq=%d apic_level=%d irq_num1=%d uTagSrc=%#x (flop)\n", R3STRING(pPciDev->name), irq_num1, iLevel, apic_irq, apic_level, irq_num, uTagSrc)); pBus->CTX_SUFF(pPciHlp)->pfnIoApicSetIrq(pBus->CTX_SUFF(pDevIns), apic_irq, apic_level, uTagSrc); } } else { Log3(("ich9pciApicSetIrq: (forced) %s: irq_num1=%d level=%d acpi_irq=%d uTagSrc=%#x\n", R3STRING(pPciDev->name), irq_num1, iLevel, iForcedIrq, uTagSrc)); pBus->CTX_SUFF(pPciHlp)->pfnIoApicSetIrq(pBus->CTX_SUFF(pDevIns), iForcedIrq, iLevel, uTagSrc); } } static void ich9pciSetIrqInternal(PICH9PCIGLOBALS pGlobals, uint8_t uDevFn, PPCIDEVICE pPciDev, int iIrq, int iLevel, uint32_t uTagSrc) { /* If MSI or MSI-X is enabled, PCI INTx# signals are disabled regardless of the PCI command * register interrupt bit state. * PCI 3.0 (section 6.8) forbids MSI and MSI-X to be enabled at the same time and makes * that undefined behavior. We check for MSI first, then MSI-X. */ if (MsiIsEnabled(pPciDev)) { Assert(!MsixIsEnabled(pPciDev)); /* Not allowed -- see note above. */ LogFlowFunc(("PCI Dev %p : MSI\n", pPciDev)); PPDMDEVINS pDevIns = pGlobals->aPciBus.CTX_SUFF(pDevIns); MsiNotify(pDevIns, pGlobals->aPciBus.CTX_SUFF(pPciHlp), pPciDev, iIrq, iLevel, uTagSrc); return; } if (MsixIsEnabled(pPciDev)) { LogFlowFunc(("PCI Dev %p : MSI-X\n", pPciDev)); PPDMDEVINS pDevIns = pGlobals->aPciBus.CTX_SUFF(pDevIns); MsixNotify(pDevIns, pGlobals->aPciBus.CTX_SUFF(pPciHlp), pPciDev, iIrq, iLevel, uTagSrc); return; } PICH9PCIBUS pBus = &pGlobals->aPciBus; const bool fIsAcpiDevice = PCIDevGetDeviceId(pPciDev) == 0x7113; LogFlowFunc(("PCI Dev %p : IRQ\n", pPciDev)); /* Check if the state changed. */ if (pPciDev->Int.s.uIrqPinState != iLevel) { pPciDev->Int.s.uIrqPinState = (iLevel & PDM_IRQ_LEVEL_HIGH); /* Send interrupt to I/O APIC only now. */ if (fIsAcpiDevice) /* * ACPI needs special treatment since SCI is hardwired and * should not be affected by PCI IRQ routing tables at the * same time SCI IRQ is shared in PCI sense hence this * kludge (i.e. we fetch the hardwired value from ACPIs * PCI device configuration space). */ ich9pciApicSetIrq(pBus, uDevFn, pPciDev, -1, iLevel, uTagSrc, PCIDevGetInterruptLine(pPciDev)); else ich9pciApicSetIrq(pBus, uDevFn, pPciDev, iIrq, iLevel, uTagSrc, -1); } } /** * Memory mapped I/O Handler for write operations. * * Emulates writes to configuration space. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param GCPhysAddr Physical address (in GC) where the read starts. * @param pv Where to fetch the result. * @param cb Number of bytes to write. * @remarks Caller enters the device critical section. */ PDMBOTHCBDECL(int) ich9pciMcfgMMIOWrite(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS GCPhysAddr, void const *pv, unsigned cb) { PICH9PCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); uint32_t u32 = 0; NOREF(pvUser); Log2(("ich9pciMcfgMMIOWrite: %RGp(%d) \n", GCPhysAddr, cb)); PCI_LOCK(pDevIns, VINF_IOM_R3_MMIO_WRITE); /* Decode target device and configuration space register */ PciAddress aDest; ich9pciPhysToPciAddr(pGlobals, GCPhysAddr, &aDest); switch (cb) { case 1: u32 = *(uint8_t*)pv; break; case 2: u32 = *(uint16_t*)pv; break; case 4: u32 = *(uint32_t*)pv; break; default: Assert(false); break; } /* Perform configuration space write */ int rc = ich9pciDataWriteAddr(pGlobals, &aDest, u32, cb, VINF_IOM_R3_MMIO_WRITE); PCI_UNLOCK(pDevIns); return rc; } /** * Memory mapped I/O Handler for read operations. * * Emulates reads from configuration space. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param GCPhysAddr Physical address (in GC) where the read starts. * @param pv Where to store the result. * @param cb Number of bytes read. * @remarks Caller enters the device critical section. */ PDMBOTHCBDECL(int) ich9pciMcfgMMIORead (PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS GCPhysAddr, void *pv, unsigned cb) { PICH9PCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); uint32_t rv; NOREF(pvUser); LogFlow(("ich9pciMcfgMMIORead: %RGp(%d) \n", GCPhysAddr, cb)); PCI_LOCK(pDevIns, VINF_IOM_R3_MMIO_READ); /* Decode target device and configuration space register */ PciAddress aDest; ich9pciPhysToPciAddr(pGlobals, GCPhysAddr, &aDest); /* Perform configuration space read */ int rc = ich9pciDataReadAddr(pGlobals, &aDest, cb, &rv, VINF_IOM_R3_MMIO_READ); if (RT_SUCCESS(rc)) { switch (cb) { case 1: *(uint8_t*)pv = (uint8_t)rv; break; case 2: *(uint16_t*)pv = (uint16_t)rv; break; case 4: *(uint32_t*)pv = (uint32_t)rv; break; default: Assert(false); break; } } PCI_UNLOCK(pDevIns); return rc; } #ifdef IN_RING3 DECLINLINE(PPCIDEVICE) ich9pciFindBridge(PICH9PCIBUS pBus, uint8_t iBus) { /* Search for a fitting bridge. */ for (uint32_t iBridge = 0; iBridge < pBus->cBridges; iBridge++) { /* * Examine secondary and subordinate bus number. * If the target bus is in the range we pass the request on to the bridge. */ PPCIDEVICE pBridge = pBus->papBridgesR3[iBridge]; AssertMsg(pBridge && pciDevIsPci2PciBridge(pBridge), ("Device is not a PCI bridge but on the list of PCI bridges\n")); uint32_t uSecondary = PCIDevGetByte(pBridge, VBOX_PCI_SECONDARY_BUS); uint32_t uSubordinate = PCIDevGetByte(pBridge, VBOX_PCI_SUBORDINATE_BUS); Log3(("ich9pciFindBridge on bus %p, bridge %d: %d in %d..%d\n", pBus, iBridge, iBus, uSecondary, uSubordinate)); if (iBus >= uSecondary && iBus <= uSubordinate) return pBridge; } /* Nothing found. */ return NULL; } static uint32_t ich9pciGetCfg(PCIDevice* aDev, int32_t iRegister, int cb) { return aDev->Int.s.pfnConfigRead(aDev, iRegister, cb); } static uint8_t ich9pciGetByte(PCIDevice* aDev, int32_t iRegister) { return (uint8_t)ich9pciGetCfg(aDev, iRegister, 1); } static uint16_t ich9pciGetWord(PCIDevice* aDev, int32_t iRegister) { return (uint16_t)ich9pciGetCfg(aDev, iRegister, 2); } static uint32_t ich9pciGetDWord(PCIDevice* aDev, int32_t iRegister) { return (uint32_t)ich9pciGetCfg(aDev, iRegister, 4); } DECLINLINE(uint32_t) ich9pciGetRegionReg(int iRegion) { return (iRegion == VBOX_PCI_ROM_SLOT) ? VBOX_PCI_ROM_ADDRESS : (VBOX_PCI_BASE_ADDRESS_0 + iRegion * 4); } #define INVALID_PCI_ADDRESS ~0U static int ich9pciUnmapRegion(PPCIDEVICE pDev, int iRegion) { PCIIORegion* pRegion = &pDev->Int.s.aIORegions[iRegion]; int rc = VINF_SUCCESS; PICH9PCIBUS pBus = pDev->Int.s.CTX_SUFF(pBus); Assert (pRegion->size != 0); if (pRegion->addr != INVALID_PCI_ADDRESS) { if (pRegion->type & PCI_ADDRESS_SPACE_IO) { /* Port IO */ rc = PDMDevHlpIOPortDeregister(pDev->pDevIns, pRegion->addr, pRegion->size); AssertRC(rc); } else { RTGCPHYS GCPhysBase = pRegion->addr; if (pBus->pPciHlpR3->pfnIsMMIO2Base(pBus->pDevInsR3, pDev->pDevIns, GCPhysBase)) { /* unmap it. */ rc = pRegion->map_func(pDev, iRegion, NIL_RTGCPHYS, pRegion->size, (PCIADDRESSSPACE)(pRegion->type)); AssertRC(rc); rc = PDMDevHlpMMIO2Unmap(pDev->pDevIns, iRegion, GCPhysBase); } else rc = PDMDevHlpMMIODeregister(pDev->pDevIns, GCPhysBase, pRegion->size); } pRegion->addr = INVALID_PCI_ADDRESS; } return rc; } static void ich9pciUpdateMappings(PCIDevice* pDev) { uint64_t uLast, uNew; int iCmd = ich9pciGetWord(pDev, VBOX_PCI_COMMAND); for (int iRegion = 0; iRegion < PCI_NUM_REGIONS; iRegion++) { PCIIORegion* pRegion = &pDev->Int.s.aIORegions[iRegion]; uint32_t uConfigReg = ich9pciGetRegionReg(iRegion); int64_t iRegionSize = pRegion->size; int rc; if (iRegionSize == 0) continue; bool f64Bit = (pRegion->type & PCI_ADDRESS_SPACE_BAR64) != 0; if (pRegion->type & PCI_ADDRESS_SPACE_IO) { /* port IO region */ if (iCmd & PCI_COMMAND_IOACCESS) { /* IO access allowed */ uNew = ich9pciGetDWord(pDev, uConfigReg); uNew &= ~(iRegionSize - 1); uLast = uNew + iRegionSize - 1; /* only 64K ioports on PC */ if (uLast <= uNew || uNew == 0 || uLast >= 0x10000) uNew = INVALID_PCI_ADDRESS; } else uNew = INVALID_PCI_ADDRESS; } else { /* MMIO region */ if (iCmd & PCI_COMMAND_MEMACCESS) { uNew = ich9pciGetDWord(pDev, uConfigReg); if (f64Bit) { uNew |= ((uint64_t)ich9pciGetDWord(pDev, uConfigReg+4)) << 32; /** @todo r=klaus Is this really true? Needs to be fixed properly. */ if (uNew > UINT64_C(0x0000010000000000)) { /* Workaround for REM being unhapping with mapping very long 64-bit addresses */ LogRel(("Ignoring too long 64-bit BAR: %llx\n", uNew)); uNew = INVALID_PCI_ADDRESS; } } /* the ROM slot has a specific enable bit */ if (iRegion == PCI_ROM_SLOT && !(uNew & 1)) uNew = INVALID_PCI_ADDRESS; else { uNew &= ~(iRegionSize - 1); uLast = uNew + iRegionSize - 1; /* NOTE: we do not support wrapping */ /* XXX: as we cannot support really dynamic mappings, we handle specific values as invalid mappings. */ /* Unconditionally exclude I/O-APIC/HPET/ROM. Pessimistic, but better than causing a mess. */ if (uLast <= uNew || uNew == 0 || (uNew <= UINT32_C(0xffffffff) && uLast >= UINT32_C(0xfec00000))) uNew = INVALID_PCI_ADDRESS; } } else uNew = INVALID_PCI_ADDRESS; } //LogRel(("PCI: config dev %u/%u BAR%i uOld=%#018llx uNew=%#018llx size=%llu\n", pDev->devfn >> 3, pDev->devfn & 7, iRegion, pRegion->addr, uNew, pRegion->size)); /* now do the real mapping */ if (uNew != pRegion->addr) { if (pRegion->addr != INVALID_PCI_ADDRESS) ich9pciUnmapRegion(pDev, iRegion); pRegion->addr = uNew; if (pRegion->addr != INVALID_PCI_ADDRESS) { /* finally, map the region */ rc = pRegion->map_func(pDev, iRegion, pRegion->addr, pRegion->size, (PCIADDRESSSPACE)(pRegion->type)); AssertRC(rc); } } if (f64Bit) iRegion++; } } static DECLCALLBACK(int) ich9pciRegister(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, const char *pszName, int iDev) { PICH9PCIBUS pBus = DEVINS_2_PCIBUS(pDevIns); /* * Check input. */ if ( !pszName || !pPciDev || iDev >= (int)RT_ELEMENTS(pBus->apDevices) ) { AssertMsgFailed(("Invalid argument! pszName=%s pPciDev=%p iDev=%d\n", pszName, pPciDev, iDev)); return VERR_INVALID_PARAMETER; } /* * Register the device. */ return ich9pciRegisterInternal(pBus, iDev, pPciDev, pszName); } static DECLCALLBACK(int) ich9pciRegisterMsi(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, PPDMMSIREG pMsiReg) { NOREF(pDevIns); int rc; rc = MsiInit(pPciDev, pMsiReg); if (RT_FAILURE(rc)) return rc; rc = MsixInit(pPciDev->Int.s.CTX_SUFF(pBus)->CTX_SUFF(pPciHlp), pPciDev, pMsiReg); if (RT_FAILURE(rc)) return rc; return VINF_SUCCESS; } static DECLCALLBACK(int) ich9pcibridgeRegister(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, const char *pszName, int iDev) { PICH9PCIBUS pBus = PDMINS_2_DATA(pDevIns, PICH9PCIBUS); /* * Check input. */ if ( !pszName || !pPciDev || iDev >= (int)RT_ELEMENTS(pBus->apDevices)) { AssertMsgFailed(("Invalid argument! pszName=%s pPciDev=%p iDev=%d\n", pszName, pPciDev, iDev)); return VERR_INVALID_PARAMETER; } /* * Register the device. */ return ich9pciRegisterInternal(pBus, iDev, pPciDev, pszName); } static DECLCALLBACK(int) ich9pciIORegionRegister(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iRegion, uint32_t cbRegion, PCIADDRESSSPACE enmType, PFNPCIIOREGIONMAP pfnCallback) { NOREF(pDevIns); /* * Validate. */ AssertMsgReturn( enmType == (PCI_ADDRESS_SPACE_MEM | PCI_ADDRESS_SPACE_BAR32) || enmType == (PCI_ADDRESS_SPACE_MEM_PREFETCH | PCI_ADDRESS_SPACE_BAR32) || enmType == (PCI_ADDRESS_SPACE_MEM | PCI_ADDRESS_SPACE_BAR64) || enmType == (PCI_ADDRESS_SPACE_MEM_PREFETCH | PCI_ADDRESS_SPACE_BAR64) || enmType == PCI_ADDRESS_SPACE_IO , ("Invalid enmType=%#x? Or was this a bitmask after all...\n", enmType), VERR_INVALID_PARAMETER); AssertMsgReturn((unsigned)iRegion < PCI_NUM_REGIONS, ("Invalid iRegion=%d PCI_NUM_REGIONS=%d\n", iRegion, PCI_NUM_REGIONS), VERR_INVALID_PARAMETER); int iLastSet = ASMBitLastSetU32(cbRegion); AssertMsgReturn( iLastSet != 0 && RT_BIT_32(iLastSet - 1) == cbRegion, ("Invalid cbRegion=%#x iLastSet=%#x (not a power of 2 or 0)\n", cbRegion, iLastSet), VERR_INVALID_PARAMETER); Log(("ich9pciIORegionRegister: %s region %d size %d type %x\n", pPciDev->name, iRegion, cbRegion, enmType)); /* Make sure that we haven't marked this region as continuation of 64-bit region. */ Assert(pPciDev->Int.s.aIORegions[iRegion].type != 0xff); /* * Register the I/O region. */ PPCIIOREGION pRegion = &pPciDev->Int.s.aIORegions[iRegion]; pRegion->addr = INVALID_PCI_ADDRESS; pRegion->size = cbRegion; pRegion->type = enmType; pRegion->map_func = pfnCallback; if ((enmType & PCI_ADDRESS_SPACE_BAR64) != 0) { AssertMsgReturn(iRegion < 4, ("Region %d cannot be 64-bit\n", iRegion), VERR_INVALID_PARAMETER); /* Mark next region as continuation of this one. */ pPciDev->Int.s.aIORegions[iRegion+1].type = 0xff; } /* Set type in the PCI config space. */ uint32_t u32Value = ((uint32_t)enmType) & (PCI_ADDRESS_SPACE_IO | PCI_ADDRESS_SPACE_BAR64 | PCI_ADDRESS_SPACE_MEM_PREFETCH); PCIDevSetDWord(pPciDev, ich9pciGetRegionReg(iRegion), u32Value); return VINF_SUCCESS; } static DECLCALLBACK(void) ich9pciSetConfigCallbacks(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, PFNPCICONFIGREAD pfnRead, PPFNPCICONFIGREAD ppfnReadOld, PFNPCICONFIGWRITE pfnWrite, PPFNPCICONFIGWRITE ppfnWriteOld) { NOREF(pDevIns); if (ppfnReadOld) *ppfnReadOld = pPciDev->Int.s.pfnConfigRead; pPciDev->Int.s.pfnConfigRead = pfnRead; if (ppfnWriteOld) *ppfnWriteOld = pPciDev->Int.s.pfnConfigWrite; pPciDev->Int.s.pfnConfigWrite = pfnWrite; } static int ich9pciR3CommonSaveExec(PICH9PCIBUS pBus, PSSMHANDLE pSSM) { /* * Iterate thru all the devices. */ for (uint32_t i = 0; i < RT_ELEMENTS(pBus->apDevices); i++) { PPCIDEVICE pDev = pBus->apDevices[i]; if (pDev) { /* Device position */ SSMR3PutU32(pSSM, i); /* PCI config registers */ SSMR3PutMem(pSSM, pDev->config, sizeof(pDev->config)); /* Device flags */ int rc = SSMR3PutU32(pSSM, pDev->Int.s.fFlags); if (RT_FAILURE(rc)) return rc; /* IRQ pin state */ rc = SSMR3PutS32(pSSM, pDev->Int.s.uIrqPinState); if (RT_FAILURE(rc)) return rc; /* MSI info */ rc = SSMR3PutU8(pSSM, pDev->Int.s.u8MsiCapOffset); if (RT_FAILURE(rc)) return rc; rc = SSMR3PutU8(pSSM, pDev->Int.s.u8MsiCapSize); if (RT_FAILURE(rc)) return rc; /* MSI-X info */ rc = SSMR3PutU8(pSSM, pDev->Int.s.u8MsixCapOffset); if (RT_FAILURE(rc)) return rc; rc = SSMR3PutU8(pSSM, pDev->Int.s.u8MsixCapSize); if (RT_FAILURE(rc)) return rc; /* Save MSI-X page state */ if (pDev->Int.s.u8MsixCapOffset != 0) { Assert(pDev->Int.s.pMsixPageR3 != NULL); SSMR3PutMem(pSSM, pDev->Int.s.pMsixPageR3, 0x1000); if (RT_FAILURE(rc)) return rc; } } } return SSMR3PutU32(pSSM, UINT32_MAX); /* terminator */ } static DECLCALLBACK(int) ich9pciR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PICH9PCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); /* * Bus state data. */ SSMR3PutU32(pSSM, pThis->uConfigReg); /* * Save IRQ states. */ for (int i = 0; i < PCI_APIC_IRQ_PINS; i++) SSMR3PutU32(pSSM, pThis->uaPciApicIrqLevels[i]); SSMR3PutU32(pSSM, ~0); /* separator */ return ich9pciR3CommonSaveExec(&pThis->aPciBus, pSSM); } static DECLCALLBACK(int) ich9pcibridgeR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PICH9PCIBUS pThis = PDMINS_2_DATA(pDevIns, PICH9PCIBUS); return ich9pciR3CommonSaveExec(pThis, pSSM); } static DECLCALLBACK(void) ich9pcibridgeConfigWrite(PPDMDEVINSR3 pDevIns, uint8_t iBus, uint8_t iDevice, uint32_t u32Address, uint32_t u32Value, unsigned cb) { PICH9PCIBUS pBus = PDMINS_2_DATA(pDevIns, PICH9PCIBUS); LogFlowFunc((": pDevIns=%p iBus=%d iDevice=%d u32Address=%u u32Value=%u cb=%d\n", pDevIns, iBus, iDevice, u32Address, u32Value, cb)); /* If the current bus is not the target bus search for the bus which contains the device. */ if (iBus != PCIDevGetByte(&pBus->aPciDev, VBOX_PCI_SECONDARY_BUS)) { PPCIDEVICE pBridgeDevice = ich9pciFindBridge(pBus, iBus); if (pBridgeDevice) { AssertPtr(pBridgeDevice->Int.s.pfnBridgeConfigWrite); pBridgeDevice->Int.s.pfnBridgeConfigWrite(pBridgeDevice->pDevIns, iBus, iDevice, u32Address, u32Value, cb); } } else { /* This is the target bus, pass the write to the device. */ PPCIDEVICE pPciDev = pBus->apDevices[iDevice]; if (pPciDev) { Log(("%s: %s: addr=%02x val=%08x len=%d\n", __FUNCTION__, pPciDev->name, u32Address, u32Value, cb)); pPciDev->Int.s.pfnConfigWrite(pPciDev, u32Address, u32Value, cb); } } } static DECLCALLBACK(uint32_t) ich9pcibridgeConfigRead(PPDMDEVINSR3 pDevIns, uint8_t iBus, uint8_t iDevice, uint32_t u32Address, unsigned cb) { PICH9PCIBUS pBus = PDMINS_2_DATA(pDevIns, PICH9PCIBUS); uint32_t u32Value; LogFlowFunc((": pDevIns=%p iBus=%d iDevice=%d u32Address=%u cb=%d\n", pDevIns, iBus, iDevice, u32Address, cb)); /* If the current bus is not the target bus search for the bus which contains the device. */ if (iBus != PCIDevGetByte(&pBus->aPciDev, VBOX_PCI_SECONDARY_BUS)) { PPCIDEVICE pBridgeDevice = ich9pciFindBridge(pBus, iBus); if (pBridgeDevice) { AssertPtr( pBridgeDevice->Int.s.pfnBridgeConfigRead); u32Value = pBridgeDevice->Int.s.pfnBridgeConfigRead(pBridgeDevice->pDevIns, iBus, iDevice, u32Address, cb); } else ich9pciNoMem(&u32Value, 4); } else { /* This is the target bus, pass the read to the device. */ PPCIDEVICE pPciDev = pBus->apDevices[iDevice]; if (pPciDev) { u32Value = pPciDev->Int.s.pfnConfigRead(pPciDev, u32Address, cb); Log(("%s: %s: u32Address=%02x u32Value=%08x cb=%d\n", __FUNCTION__, pPciDev->name, u32Address, u32Value, cb)); } else ich9pciNoMem(&u32Value, 4); } return u32Value; } /** * Common routine for restoring the config registers of a PCI device. * * @param pDev The PCI device. * @param pbSrcConfig The configuration register values to be loaded. * @param fIsBridge Whether this is a bridge device or not. */ static void pciR3CommonRestoreConfig(PPCIDEVICE pDev, uint8_t const *pbSrcConfig, bool fIsBridge) { /* * This table defines the fields for normal devices and bridge devices, and * the order in which they need to be restored. */ static const struct PciField { uint8_t off; uint8_t cb; uint8_t fWritable; uint8_t fBridge; const char *pszName; } s_aFields[] = { /* off,cb,fW,fB, pszName */ { 0x00, 2, 0, 3, "VENDOR_ID" }, { 0x02, 2, 0, 3, "DEVICE_ID" }, { 0x06, 2, 1, 3, "STATUS" }, { 0x08, 1, 0, 3, "REVISION_ID" }, { 0x09, 1, 0, 3, "CLASS_PROG" }, { 0x0a, 1, 0, 3, "CLASS_SUB" }, { 0x0b, 1, 0, 3, "CLASS_BASE" }, { 0x0c, 1, 1, 3, "CACHE_LINE_SIZE" }, { 0x0d, 1, 1, 3, "LATENCY_TIMER" }, { 0x0e, 1, 0, 3, "HEADER_TYPE" }, { 0x0f, 1, 1, 3, "BIST" }, { 0x10, 4, 1, 3, "BASE_ADDRESS_0" }, { 0x14, 4, 1, 3, "BASE_ADDRESS_1" }, { 0x18, 4, 1, 1, "BASE_ADDRESS_2" }, { 0x18, 1, 1, 2, "PRIMARY_BUS" }, // fWritable = ?? { 0x19, 1, 1, 2, "SECONDARY_BUS" }, // fWritable = ?? { 0x1a, 1, 1, 2, "SUBORDINATE_BUS" }, // fWritable = ?? { 0x1b, 1, 1, 2, "SEC_LATENCY_TIMER" }, // fWritable = ?? { 0x1c, 4, 1, 1, "BASE_ADDRESS_3" }, { 0x1c, 1, 1, 2, "IO_BASE" }, // fWritable = ?? { 0x1d, 1, 1, 2, "IO_LIMIT" }, // fWritable = ?? { 0x1e, 2, 1, 2, "SEC_STATUS" }, // fWritable = ?? { 0x20, 4, 1, 1, "BASE_ADDRESS_4" }, { 0x20, 2, 1, 2, "MEMORY_BASE" }, // fWritable = ?? { 0x22, 2, 1, 2, "MEMORY_LIMIT" }, // fWritable = ?? { 0x24, 4, 1, 1, "BASE_ADDRESS_5" }, { 0x24, 2, 1, 2, "PREF_MEMORY_BASE" }, // fWritable = ?? { 0x26, 2, 1, 2, "PREF_MEMORY_LIMIT" }, // fWritable = ?? { 0x28, 4, 1, 1, "CARDBUS_CIS" }, // fWritable = ?? { 0x28, 4, 1, 2, "PREF_BASE_UPPER32" }, // fWritable = ?? { 0x2c, 2, 0, 1, "SUBSYSTEM_VENDOR_ID" },// fWritable = !? { 0x2c, 4, 1, 2, "PREF_LIMIT_UPPER32" },// fWritable = ?? { 0x2e, 2, 0, 1, "SUBSYSTEM_ID" }, // fWritable = !? { 0x30, 4, 1, 1, "ROM_ADDRESS" }, // fWritable = ?! { 0x30, 2, 1, 2, "IO_BASE_UPPER16" }, // fWritable = ?! { 0x32, 2, 1, 2, "IO_LIMIT_UPPER16" }, // fWritable = ?! { 0x34, 4, 0, 3, "CAPABILITY_LIST" }, // fWritable = !? cb=!? { 0x38, 4, 1, 1, "RESERVED_38" }, // ??? { 0x38, 4, 1, 2, "ROM_ADDRESS_BR" }, // fWritable = !? cb=!? fBridge=!? { 0x3c, 1, 1, 3, "INTERRUPT_LINE" }, // fBridge=?? { 0x3d, 1, 0, 3, "INTERRUPT_PIN" }, // fBridge=?? { 0x3e, 1, 0, 1, "MIN_GNT" }, { 0x3e, 2, 1, 2, "BRIDGE_CONTROL" }, // fWritable = !? { 0x3f, 1, 0, 1, "MAX_LAT" }, /* The COMMAND register must come last as it requires the *ADDRESS* registers to be restored before we pretent to change it from 0 to whatever value the guest assigned it. */ { 0x04, 2, 1, 3, "COMMAND" }, }; #ifdef RT_STRICT /* Check that we've got full register coverage. */ uint32_t bmDevice[0x40 / 32]; uint32_t bmBridge[0x40 / 32]; RT_ZERO(bmDevice); RT_ZERO(bmBridge); for (uint32_t i = 0; i < RT_ELEMENTS(s_aFields); i++) { uint8_t off = s_aFields[i].off; uint8_t cb = s_aFields[i].cb; uint8_t f = s_aFields[i].fBridge; while (cb-- > 0) { if (f & 1) AssertMsg(!ASMBitTest(bmDevice, off), ("%#x\n", off)); if (f & 2) AssertMsg(!ASMBitTest(bmBridge, off), ("%#x\n", off)); if (f & 1) ASMBitSet(bmDevice, off); if (f & 2) ASMBitSet(bmBridge, off); off++; } } for (uint32_t off = 0; off < 0x40; off++) { AssertMsg(ASMBitTest(bmDevice, off), ("%#x\n", off)); AssertMsg(ASMBitTest(bmBridge, off), ("%#x\n", off)); } #endif /* * Loop thru the fields covering the 64 bytes of standard registers. */ uint8_t const fBridge = fIsBridge ? 2 : 1; Assert(!pciDevIsPassthrough(pDev)); uint8_t *pbDstConfig = &pDev->config[0]; for (uint32_t i = 0; i < RT_ELEMENTS(s_aFields); i++) if (s_aFields[i].fBridge & fBridge) { uint8_t const off = s_aFields[i].off; uint8_t const cb = s_aFields[i].cb; uint32_t u32Src; uint32_t u32Dst; switch (cb) { case 1: u32Src = pbSrcConfig[off]; u32Dst = pbDstConfig[off]; break; case 2: u32Src = *(uint16_t const *)&pbSrcConfig[off]; u32Dst = *(uint16_t const *)&pbDstConfig[off]; break; case 4: u32Src = *(uint32_t const *)&pbSrcConfig[off]; u32Dst = *(uint32_t const *)&pbDstConfig[off]; break; default: AssertFailed(); continue; } if ( u32Src != u32Dst || off == VBOX_PCI_COMMAND) { if (u32Src != u32Dst) { if (!s_aFields[i].fWritable) LogRel(("PCI: %8s/%u: %2u-bit field %s: %x -> %x - !READ ONLY!\n", pDev->name, pDev->pDevIns->iInstance, cb*8, s_aFields[i].pszName, u32Dst, u32Src)); else LogRel(("PCI: %8s/%u: %2u-bit field %s: %x -> %x\n", pDev->name, pDev->pDevIns->iInstance, cb*8, s_aFields[i].pszName, u32Dst, u32Src)); } if (off == VBOX_PCI_COMMAND) PCIDevSetCommand(pDev, 0); /* For remapping, see ich9pciR3CommonLoadExec. */ pDev->Int.s.pfnConfigWrite(pDev, off, u32Src, cb); } } /* * The device dependent registers. * * We will not use ConfigWrite here as we have no clue about the size * of the registers, so the device is responsible for correctly * restoring functionality governed by these registers. */ for (uint32_t off = 0x40; off < sizeof(pDev->config); off++) if (pbDstConfig[off] != pbSrcConfig[off]) { LogRel(("PCI: %8s/%u: register %02x: %02x -> %02x\n", pDev->name, pDev->pDevIns->iInstance, off, pbDstConfig[off], pbSrcConfig[off])); /** @todo make this Log() later. */ pbDstConfig[off] = pbSrcConfig[off]; } } /** * Common worker for ich9pciR3LoadExec and ich9pcibridgeR3LoadExec. * * @returns VBox status code. * @param pBus The bus which data is being loaded. * @param pSSM The saved state handle. * @param uVersion The data version. * @param uPass The pass. */ static DECLCALLBACK(int) ich9pciR3CommonLoadExec(PICH9PCIBUS pBus, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { uint32_t u32; uint32_t i; int rc; Assert(uPass == SSM_PASS_FINAL); NOREF(uPass); if (uVersion != VBOX_ICH9PCI_SAVED_STATE_VERSION_CURRENT) return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; /* * Iterate thru all the devices and write 0 to the COMMAND register so * that all the memory is unmapped before we start restoring the saved * mapping locations. * * The register value is restored afterwards so we can do proper * LogRels in pciR3CommonRestoreConfig. */ for (i = 0; i < RT_ELEMENTS(pBus->apDevices); i++) { PPCIDEVICE pDev = pBus->apDevices[i]; if (pDev) { uint16_t u16 = PCIDevGetCommand(pDev); pDev->Int.s.pfnConfigWrite(pDev, VBOX_PCI_COMMAND, 0, 2); PCIDevSetCommand(pDev, u16); Assert(PCIDevGetCommand(pDev) == u16); } } void *pvMsixPage = RTMemTmpAllocZ(0x1000); AssertReturn(pvMsixPage, VERR_NO_TMP_MEMORY); /* * Iterate all the devices. */ for (i = 0;; i++) { PPCIDEVICE pDev; PCIDEVICE DevTmp; /* index / terminator */ rc = SSMR3GetU32(pSSM, &u32); if (RT_FAILURE(rc)) break; if (u32 == (uint32_t)~0) break; AssertMsgBreak(u32 < RT_ELEMENTS(pBus->apDevices) && u32 >= i, ("u32=%#x i=%#x\n", u32, i)); /* skip forward to the device checking that no new devices are present. */ for (; i < u32; i++) { pDev = pBus->apDevices[i]; if (pDev) { LogRel(("PCI: New device in slot %#x, %s (vendor=%#06x device=%#06x)\n", i, pDev->name, PCIDevGetVendorId(pDev), PCIDevGetDeviceId(pDev))); if (SSMR3HandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT) { rc = SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("New device in slot %#x, %s (vendor=%#06x device=%#06x)"), i, pDev->name, PCIDevGetVendorId(pDev), PCIDevGetDeviceId(pDev)); break; } } } if (RT_FAILURE(rc)) break; /* get the data */ DevTmp.Int.s.fFlags = 0; DevTmp.Int.s.u8MsiCapOffset = 0; DevTmp.Int.s.u8MsiCapSize = 0; DevTmp.Int.s.u8MsixCapOffset = 0; DevTmp.Int.s.u8MsixCapSize = 0; DevTmp.Int.s.uIrqPinState = ~0; /* Invalid value in case we have an older saved state to force a state change in pciSetIrq. */ SSMR3GetMem(pSSM, DevTmp.config, sizeof(DevTmp.config)); SSMR3GetU32(pSSM, &DevTmp.Int.s.fFlags); SSMR3GetS32(pSSM, &DevTmp.Int.s.uIrqPinState); SSMR3GetU8(pSSM, &DevTmp.Int.s.u8MsiCapOffset); SSMR3GetU8(pSSM, &DevTmp.Int.s.u8MsiCapSize); SSMR3GetU8(pSSM, &DevTmp.Int.s.u8MsixCapOffset); rc = SSMR3GetU8(pSSM, &DevTmp.Int.s.u8MsixCapSize); if (RT_FAILURE(rc)) break; /* Load MSI-X page state */ if (DevTmp.Int.s.u8MsixCapOffset != 0) { Assert(pvMsixPage != NULL); rc = SSMR3GetMem(pSSM, pvMsixPage, 0x1000); if (RT_FAILURE(rc)) break; } /* check that it's still around. */ pDev = pBus->apDevices[i]; if (!pDev) { LogRel(("PCI: Device in slot %#x has been removed! vendor=%#06x device=%#06x\n", i, PCIDevGetVendorId(&DevTmp), PCIDevGetDeviceId(&DevTmp))); if (SSMR3HandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT) { rc = SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("Device in slot %#x has been removed! vendor=%#06x device=%#06x"), i, PCIDevGetVendorId(&DevTmp), PCIDevGetDeviceId(&DevTmp)); break; } continue; } /* match the vendor id assuming that this will never be changed. */ if (PCIDevGetVendorId(&DevTmp) != PCIDevGetVendorId(pDev)) { rc = SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("Device in slot %#x (%s) vendor id mismatch! saved=%.4Rhxs current=%.4Rhxs"), i, pDev->name, PCIDevGetVendorId(&DevTmp), PCIDevGetVendorId(pDev)); break; } /* commit the loaded device config. */ Assert(!pciDevIsPassthrough(pDev)); pciR3CommonRestoreConfig(pDev, &DevTmp.config[0], false ); /** @todo fix bridge fun! */ pDev->Int.s.uIrqPinState = DevTmp.Int.s.uIrqPinState; pDev->Int.s.u8MsiCapOffset = DevTmp.Int.s.u8MsiCapOffset; pDev->Int.s.u8MsiCapSize = DevTmp.Int.s.u8MsiCapSize; pDev->Int.s.u8MsixCapOffset = DevTmp.Int.s.u8MsixCapOffset; pDev->Int.s.u8MsixCapSize = DevTmp.Int.s.u8MsixCapSize; if (DevTmp.Int.s.u8MsixCapSize != 0) { Assert(pDev->Int.s.pMsixPageR3 != NULL); memcpy(pDev->Int.s.pMsixPageR3, pvMsixPage, 0x1000); } } RTMemTmpFree(pvMsixPage); return rc; } static DECLCALLBACK(int) ich9pciR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { PICH9PCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); PICH9PCIBUS pBus = &pThis->aPciBus; uint32_t u32; int rc; /* We ignore this version as there's no saved state with it anyway */ if (uVersion == VBOX_ICH9PCI_SAVED_STATE_VERSION_NOMSI) return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; if (uVersion > VBOX_ICH9PCI_SAVED_STATE_VERSION_MSI) return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; /* * Bus state data. */ SSMR3GetU32(pSSM, &pThis->uConfigReg); /* * Load IRQ states. */ for (int i = 0; i < PCI_APIC_IRQ_PINS; i++) SSMR3GetU32(pSSM, (uint32_t*)&pThis->uaPciApicIrqLevels[i]); /* separator */ rc = SSMR3GetU32(pSSM, &u32); if (RT_FAILURE(rc)) return rc; if (u32 != (uint32_t)~0) AssertMsgFailedReturn(("u32=%#x\n", u32), rc); return ich9pciR3CommonLoadExec(pBus, pSSM, uVersion, uPass); } static DECLCALLBACK(int) ich9pcibridgeR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { PICH9PCIBUS pThis = PDMINS_2_DATA(pDevIns, PICH9PCIBUS); if (uVersion > VBOX_ICH9PCI_SAVED_STATE_VERSION_MSI) return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; return ich9pciR3CommonLoadExec(pThis, pSSM, uVersion, uPass); } /* * Perform imeediate read of configuration space register. * Cannot be rescheduled, as already in R3. */ static uint32_t ich9pciConfigRead(PICH9PCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr, uint32_t len) { PciAddress aPciAddr; aPciAddr.iBus = uBus; aPciAddr.iDeviceFunc = uDevFn; aPciAddr.iRegister = addr; uint32_t u32Val; int rc = ich9pciDataReadAddr(pGlobals, &aPciAddr, len, &u32Val, VERR_INTERNAL_ERROR); AssertRC(rc); return u32Val; } /* * Perform imeediate write to configuration space register. * Cannot be rescheduled, as already in R3. */ static void ich9pciConfigWrite(PICH9PCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr, uint32_t val, uint32_t len) { PciAddress aPciAddr; aPciAddr.iBus = uBus; aPciAddr.iDeviceFunc = uDevFn; aPciAddr.iRegister = addr; int rc = ich9pciDataWriteAddr(pGlobals, &aPciAddr, val, len, VERR_INTERNAL_ERROR); AssertRC(rc); } static void ich9pciSetRegionAddress(PICH9PCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, int iRegion, uint64_t addr) { uint32_t uReg = ich9pciGetRegionReg(iRegion); /* Read memory type first. */ uint8_t uResourceType = ich9pciConfigRead(pGlobals, uBus, uDevFn, uReg, 1); Log(("Set region address: %02x:%02x.%d region %d address=%lld\n", uBus, uDevFn >> 3, uDevFn & 7, iRegion, addr)); bool f64Bit = (uResourceType & PCI_ADDRESS_SPACE_BAR64) != 0; /* Write address of the device. */ ich9pciConfigWrite(pGlobals, uBus, uDevFn, uReg, (uint32_t)addr, 4); if (f64Bit) ich9pciConfigWrite(pGlobals, uBus, uDevFn, uReg + 4, (uint32_t)(addr >> 32), 4); } static void ich9pciBiosInitBridge(PICH9PCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn) { Log(("BIOS init bridge: %02x::%02x.%d\n", uBus, uDevFn >> 3, uDevFn & 7)); /* * The I/O range for the bridge must be aligned to a 4KB boundary. * This does not change anything really as the access to the device is not going * through the bridge but we want to be compliant to the spec. */ if ((pGlobals->uPciBiosIo % 4096) != 0) { pGlobals->uPciBiosIo = RT_ALIGN_32(pGlobals->uPciBiosIo, 4*1024); Log(("%s: Aligned I/O start address. New address %#x\n", __FUNCTION__, pGlobals->uPciBiosIo)); } ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_IO_BASE, (pGlobals->uPciBiosIo >> 8) & 0xf0, 1); /* The MMIO range for the bridge must be aligned to a 1MB boundary. */ if ((pGlobals->uPciBiosMmio % (1024 * 1024)) != 0) { pGlobals->uPciBiosMmio = RT_ALIGN_32(pGlobals->uPciBiosMmio, 1024*1024); Log(("%s: Aligned MMIO start address. New address %#x\n", __FUNCTION__, pGlobals->uPciBiosMmio)); } ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_MEMORY_BASE, (pGlobals->uPciBiosMmio >> 16) & UINT32_C(0xffff0), 2); /* Save values to compare later to. */ uint32_t u32IoAddressBase = pGlobals->uPciBiosIo; uint32_t u32MMIOAddressBase = pGlobals->uPciBiosMmio; uint8_t uBridgeBus = ich9pciConfigRead(pGlobals, uBus, uDevFn, VBOX_PCI_SECONDARY_BUS, 1); /* Init devices behind the bridge and possibly other bridges as well. */ for (int iDev = 0; iDev <= 255; iDev++) ich9pciBiosInitDevice(pGlobals, uBridgeBus, iDev); /* * Set I/O limit register. If there is no device with I/O space behind the bridge * we set a lower value than in the base register. * The result with a real bridge is that no I/O transactions are passed to the secondary * interface. Again this doesn't really matter here but we want to be compliant to the spec. */ if ((u32IoAddressBase != pGlobals->uPciBiosIo) && ((pGlobals->uPciBiosIo % 4096) != 0)) { /* The upper boundary must be one byte less than a 4KB boundary. */ pGlobals->uPciBiosIo = RT_ALIGN_32(pGlobals->uPciBiosIo, 4*1024); } ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_IO_LIMIT, ((pGlobals->uPciBiosIo >> 8) & 0xf0) - 1, 1); /* Same with the MMIO limit register but with 1MB boundary here. */ if ((u32MMIOAddressBase != pGlobals->uPciBiosMmio) && ((pGlobals->uPciBiosMmio % (1024 * 1024)) != 0)) { /* The upper boundary must be one byte less than a 1MB boundary. */ pGlobals->uPciBiosMmio = RT_ALIGN_32(pGlobals->uPciBiosMmio, 1024*1024); } ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_MEMORY_LIMIT, ((pGlobals->uPciBiosMmio >> 16) & UINT32_C(0xfff0)) - 1, 2); /* * Set the prefetch base and limit registers. We currently have no device with a prefetchable region * which may be behind a bridge. That's why it is unconditionally disabled here atm by writing a higher value into * the base register than in the limit register. */ ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_MEMORY_BASE, 0xfff0, 2); ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_MEMORY_LIMIT, 0x0, 2); ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_BASE_UPPER32, 0x00, 4); ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_LIMIT_UPPER32, 0x00, 4); } static void ich9pciBiosInitDevice(PICH9PCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn) { uint16_t uDevClass, uVendor, uDevice; uint8_t uCmd; uDevClass = ich9pciConfigRead(pGlobals, uBus, uDevFn, VBOX_PCI_CLASS_DEVICE, 2); uVendor = ich9pciConfigRead(pGlobals, uBus, uDevFn, VBOX_PCI_VENDOR_ID, 2); uDevice = ich9pciConfigRead(pGlobals, uBus, uDevFn, VBOX_PCI_DEVICE_ID, 2); /* If device is present */ if (uVendor == 0xffff) return; Log(("BIOS init device: %02x:%02x.%d\n", uBus, uDevFn >> 3, uDevFn & 7)); switch (uDevClass) { case 0x0101: /* IDE controller */ ich9pciConfigWrite(pGlobals, uBus, uDevFn, 0x40, 0x8000, 2); /* enable IDE0 */ ich9pciConfigWrite(pGlobals, uBus, uDevFn, 0x42, 0x8000, 2); /* enable IDE1 */ goto default_map; break; case 0x0300: /* VGA controller */ if (uVendor != 0x80ee) goto default_map; /* VGA: map frame buffer to default Bochs VBE address */ ich9pciSetRegionAddress(pGlobals, uBus, uDevFn, 0, 0xE0000000); /* * Legacy VGA I/O ports are implicitly decoded by a VGA class device. But * only the framebuffer (i.e., a memory region) is explicitly registered via * ich9pciSetRegionAddress, so don't forget to enable I/O decoding. */ uCmd = ich9pciConfigRead(pGlobals, uBus, uDevFn, VBOX_PCI_COMMAND, 1); ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_COMMAND, uCmd | PCI_COMMAND_IOACCESS | PCI_COMMAND_MEMACCESS, 1); break; case 0x0604: /* PCI-to-PCI bridge. */ AssertMsg(pGlobals->uBus < 255, ("Too many bridges on the bus\n")); ich9pciBiosInitBridge(pGlobals, uBus, uDevFn); break; default: default_map: { /* default memory mappings */ bool fActiveMemRegion = false; bool fActiveIORegion = false; /* * We ignore ROM region here. */ for (int iRegion = 0; iRegion < (PCI_NUM_REGIONS-1); iRegion++) { uint32_t u32Address = ich9pciGetRegionReg(iRegion); /* Calculate size - we write all 1s into the BAR, and then evaluate which bits are cleared. */ uint8_t u8ResourceType = ich9pciConfigRead(pGlobals, uBus, uDevFn, u32Address, 1); bool f64bit = (u8ResourceType & PCI_ADDRESS_SPACE_BAR64) != 0; bool fIsPio = ((u8ResourceType & PCI_COMMAND_IOACCESS) == PCI_COMMAND_IOACCESS); uint64_t cbRegSize64 = 0; if (f64bit) { ich9pciConfigWrite(pGlobals, uBus, uDevFn, u32Address, UINT32_C(0xffffffff), 4); ich9pciConfigWrite(pGlobals, uBus, uDevFn, u32Address+4, UINT32_C(0xffffffff), 4); cbRegSize64 = ich9pciConfigRead(pGlobals, uBus, uDevFn, u32Address, 4); cbRegSize64 |= ((uint64_t)ich9pciConfigRead(pGlobals, uBus, uDevFn, u32Address+4, 4) << 32); cbRegSize64 &= ~UINT64_C(0x0f); cbRegSize64 = (~cbRegSize64) + 1; /* No 64-bit PIO regions possible. */ #ifndef DEBUG_bird /* EFI triggers this for DevAHCI. */ AssertMsg((u8ResourceType & PCI_COMMAND_IOACCESS) == 0, ("type=%#x rgn=%d\n", u8ResourceType, iRegion)); #endif } else { uint32_t cbRegSize32; ich9pciConfigWrite(pGlobals, uBus, uDevFn, u32Address, UINT32_C(0xffffffff), 4); cbRegSize32 = ich9pciConfigRead(pGlobals, uBus, uDevFn, u32Address, 4); /* Clear resource information depending on resource type. */ if (fIsPio) /* PIO */ cbRegSize32 &= ~UINT32_C(0x01); else /* MMIO */ cbRegSize32 &= ~UINT32_C(0x0f); /* * Invert all bits and add 1 to get size of the region. * (From PCI implementation note) */ if (fIsPio && (cbRegSize32 & UINT32_C(0xffff0000)) == 0) cbRegSize32 = (~(cbRegSize32 | UINT32_C(0xffff0000))) + 1; else cbRegSize32 = (~cbRegSize32) + 1; cbRegSize64 = cbRegSize32; } #ifndef DEBUG_bird /* EFI triggers this for DevAHCI. */ Assert(cbRegSize64 == (uint32_t)cbRegSize64); #endif Log2(("%s: Size of region %u for device %d on bus %d is %lld\n", __FUNCTION__, iRegion, uDevFn, uBus, cbRegSize64)); if (cbRegSize64) { /** @todo r=klaus make this code actually handle 64-bit BARs, especially MMIO which can't possibly fit into the memory hole. */ uint32_t cbRegSize32 = (uint32_t)cbRegSize64; uint32_t* paddr = fIsPio ? &pGlobals->uPciBiosIo : &pGlobals->uPciBiosMmio; uint32_t uNew = *paddr; uNew = (uNew + cbRegSize32 - 1) & ~(cbRegSize32 - 1); if (fIsPio) uNew &= UINT32_C(0xffff); /* Unconditionally exclude I/O-APIC/HPET/ROM. Pessimistic, but better than causing a mess. */ if (!uNew || (uNew <= UINT32_C(0xffffffff) && uNew + cbRegSize32 - 1 >= UINT32_C(0xfec00000))) { LogRel(("PCI: no space left for BAR%u of device %u/%u/%u (vendor=%#06x device=%#06x)\n", iRegion, uBus, uDevFn >> 3, uDevFn & 7, uVendor, uDevice)); /** @todo make this a VM start failure later. */ /* Undo the mapping mess caused by the size probing. */ ich9pciConfigWrite(pGlobals, uBus, uDevFn, u32Address, UINT32_C(0), 4); if (f64bit) ich9pciConfigWrite(pGlobals, uBus, uDevFn, u32Address+4, UINT32_C(0), 4); } else { Log(("%s: Start address of %s region %u is %#x\n", __FUNCTION__, (fIsPio ? "I/O" : "MMIO"), iRegion, uNew)); ich9pciSetRegionAddress(pGlobals, uBus, uDevFn, iRegion, uNew); if (fIsPio) fActiveIORegion = true; else fActiveMemRegion = true; *paddr = uNew + cbRegSize32; Log2(("%s: New address is %#x\n", __FUNCTION__, *paddr)); } if (f64bit) iRegion++; /* skip next region */ } } /* Update the command word appropriately. */ uCmd = ich9pciConfigRead(pGlobals, uBus, uDevFn, VBOX_PCI_COMMAND, 2); if (fActiveMemRegion) uCmd |= PCI_COMMAND_MEMACCESS; /* Enable MMIO access. */ if (fActiveIORegion) uCmd |= PCI_COMMAND_IOACCESS; /* Enable I/O space access. */ ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_COMMAND, uCmd, 2); break; } } /* map the interrupt */ uint32_t iPin = ich9pciConfigRead(pGlobals, uBus, uDevFn, VBOX_PCI_INTERRUPT_PIN, 1); if (iPin != 0) { iPin--; if (uBus != 0) { /* Find bus this device attached to. */ PICH9PCIBUS pBus = &pGlobals->aPciBus; while (1) { PPCIDEVICE pBridge = ich9pciFindBridge(pBus, uBus); if (!pBridge) { Assert(false); break; } if (uBus == PCIDevGetByte(pBridge, VBOX_PCI_SECONDARY_BUS)) { /* OK, found bus this device attached to. */ break; } pBus = PDMINS_2_DATA(pBridge->pDevIns, PICH9PCIBUS); } /* We need to go up to the host bus to see which irq pin this * device will use there. See logic in ich9pcibridgeSetIrq(). */ while (pBus->iBus != 0) { /* Get the pin the device would assert on the bridge. */ iPin = ((pBus->aPciDev.devfn >> 3) + iPin) & 3; pBus = pBus->aPciDev.Int.s.pBusR3; }; } int iIrq = aPciIrqs[ich9pciSlotGetPirq(uBus, uDevFn, iPin)]; Log(("Using pin %d and IRQ %d for device %02x:%02x.%d\n", iPin, iIrq, uBus, uDevFn>>3, uDevFn&7)); ich9pciConfigWrite(pGlobals, uBus, uDevFn, VBOX_PCI_INTERRUPT_LINE, iIrq, 1); } } /** * Initializes bridges registers used for routing. * * @returns nothing. * @param pGlobals Global device instance data used to generate unique bus numbers. * @param pBus The PCI bus to initialize. * @param uBusPrimary The primary bus number the bus is connected to. * @param uBusSecondary The secondary bus number, i.e. the bus number behind the bridge. */ static void ich9pciInitBridgeTopology(PICH9PCIGLOBALS pGlobals, PICH9PCIBUS pBus, unsigned uBusPrimary, unsigned uBusSecondary) { PPCIDEVICE pBridgeDev = &pBus->aPciDev; /* Set only if we are not on the root bus, it has no primary bus attached. */ if (uBusSecondary != 0) { PCIDevSetByte(pBridgeDev, VBOX_PCI_PRIMARY_BUS, uBusPrimary); PCIDevSetByte(pBridgeDev, VBOX_PCI_SECONDARY_BUS, uBusSecondary); } for (uint32_t iBridge = 0; iBridge < pBus->cBridges; iBridge++) { PPCIDEVICE pBridge = pBus->papBridgesR3[iBridge]; AssertMsg(pBridge && pciDevIsPci2PciBridge(pBridge), ("Device is not a PCI bridge but on the list of PCI bridges\n")); PICH9PCIBUS pChildBus = PDMINS_2_DATA(pBridge->pDevIns, PICH9PCIBUS); pGlobals->uBus++; ich9pciInitBridgeTopology(pGlobals, pChildBus, uBusSecondary, pGlobals->uBus); } PCIDevSetByte(pBridgeDev, VBOX_PCI_SUBORDINATE_BUS, pGlobals->uBus); Log2(("ich9pciInitBridgeTopology: for bus %p: primary=%d secondary=%d subordinate=%d\n", pBus, PCIDevGetByte(pBridgeDev, VBOX_PCI_PRIMARY_BUS), PCIDevGetByte(pBridgeDev, VBOX_PCI_SECONDARY_BUS), PCIDevGetByte(pBridgeDev, VBOX_PCI_SUBORDINATE_BUS) )); } static DECLCALLBACK(int) ich9pciFakePCIBIOS(PPDMDEVINS pDevIns) { PICH9PCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); PVM pVM = PDMDevHlpGetVM(pDevIns); Assert(pVM); /* * Set the start addresses. */ pGlobals->uPciBiosIo = 0xd000; pGlobals->uPciBiosMmio = UINT32_C(0xf0000000); pGlobals->uBus = 0; /* * Assign bridge topology, for further routing to work. */ PICH9PCIBUS pBus = &pGlobals->aPciBus; ich9pciInitBridgeTopology(pGlobals, pBus, 0, 0); /* * Init the devices. */ for (int i = 0; i < 256; i++) { ich9pciBiosInitDevice(pGlobals, 0, i); } return VINF_SUCCESS; } /* * Configuration space read callback (PCIDEVICEINT::pfnConfigRead) for * connected devices. */ static DECLCALLBACK(uint32_t) ich9pciConfigReadDev(PCIDevice *aDev, uint32_t u32Address, unsigned len) { if ((u32Address + len) > 256 && (u32Address + len) < 4096) { LogRel(("PCI: %8s/%u: Read from extended register %d fallen back to generic code\n", aDev->name, aDev->pDevIns->iInstance, u32Address)); return 0; } AssertMsgReturn(u32Address + len <= 256, ("Read after the end of PCI config space\n"), 0); if ( pciDevIsMsiCapable(aDev) && (u32Address >= aDev->Int.s.u8MsiCapOffset) && (u32Address < (unsigned)(aDev->Int.s.u8MsiCapOffset + aDev->Int.s.u8MsiCapSize)) ) { return MsiPciConfigRead(aDev->Int.s.CTX_SUFF(pBus)->CTX_SUFF(pDevIns), aDev, u32Address, len); } if ( pciDevIsMsixCapable(aDev) && (u32Address >= aDev->Int.s.u8MsixCapOffset) && (u32Address < (unsigned)(aDev->Int.s.u8MsixCapOffset + aDev->Int.s.u8MsixCapSize)) ) { return MsixPciConfigRead(aDev->Int.s.CTX_SUFF(pBus)->CTX_SUFF(pDevIns), aDev, u32Address, len); } AssertMsgReturn(u32Address + len <= 256, ("Read after end of PCI config space\n"), 0); switch (len) { case 1: return PCIDevGetByte(aDev, u32Address); case 2: return PCIDevGetWord(aDev, u32Address); case 4: return PCIDevGetDWord(aDev, u32Address); default: Assert(false); return 0; } } DECLINLINE(void) ich9pciWriteBarByte(PCIDevice *aDev, int iRegion, int iOffset, uint8_t u8Val) { PCIIORegion * pRegion = &aDev->Int.s.aIORegions[iRegion]; int64_t iRegionSize = pRegion->size; Log3(("ich9pciWriteBarByte: region=%d off=%d val=%x size=%d\n", iRegion, iOffset, u8Val, iRegionSize)); if (iOffset > 3) Assert((pRegion->type & PCI_ADDRESS_SPACE_BAR64) != 0); /* Check if we're writing to upper part of 64-bit BAR. */ if (pRegion->type == 0xff) { ich9pciWriteBarByte(aDev, iRegion-1, iOffset+4, u8Val); return; } /* Region doesn't exist */ if (iRegionSize == 0) return; uint32_t uAddr = ich9pciGetRegionReg(iRegion) + iOffset; /* Region size must be power of two */ Assert((iRegionSize & (iRegionSize - 1)) == 0); uint8_t uMask = ((iRegionSize - 1) >> (iOffset*8) ) & 0xff; if (iOffset == 0) { uMask |= (pRegion->type & PCI_ADDRESS_SPACE_IO) ? (1 << 2) - 1 /* 2 lowest bits for IO region */ : (1 << 4) - 1 /* 4 lowest bits for memory region, also ROM enable bit for ROM region */; } uint8_t u8Old = PCIDevGetByte(aDev, uAddr) & uMask; u8Val = (u8Old & uMask) | (u8Val & ~uMask); Log3(("ich9pciWriteBarByte: was %x writing %x\n", u8Old, u8Val)); PCIDevSetByte(aDev, uAddr, u8Val); } /** * Configuration space write callback (PCIDEVICEINT::pfnConfigWrite) * for connected devices. * * See paragraph 7.5 of PCI Express specification (p. 349) for * definition of registers and their writability policy. */ static DECLCALLBACK(void) ich9pciConfigWriteDev(PCIDevice *aDev, uint32_t u32Address, uint32_t val, unsigned len) { Assert(len <= 4); if ((u32Address + len) > 256 && (u32Address + len) < 4096) { LogRel(("PCI: %8s/%u: Write to extended register %d fallen back to generic code\n", aDev->name, aDev->pDevIns->iInstance, u32Address)); return; } AssertMsgReturnVoid(u32Address + len <= 256, ("Write after end of PCI config space\n")); if ( pciDevIsMsiCapable(aDev) && (u32Address >= aDev->Int.s.u8MsiCapOffset) && (u32Address < (unsigned)(aDev->Int.s.u8MsiCapOffset + aDev->Int.s.u8MsiCapSize)) ) { MsiPciConfigWrite(aDev->Int.s.CTX_SUFF(pBus)->CTX_SUFF(pDevIns), aDev->Int.s.CTX_SUFF(pBus)->CTX_SUFF(pPciHlp), aDev, u32Address, val, len); return; } if ( pciDevIsMsixCapable(aDev) && (u32Address >= aDev->Int.s.u8MsixCapOffset) && (u32Address < (unsigned)(aDev->Int.s.u8MsixCapOffset + aDev->Int.s.u8MsixCapSize)) ) { MsixPciConfigWrite(aDev->Int.s.CTX_SUFF(pBus)->CTX_SUFF(pDevIns), aDev->Int.s.CTX_SUFF(pBus)->CTX_SUFF(pPciHlp), aDev, u32Address, val, len); return; } uint32_t addr = u32Address; bool fUpdateMappings = false; bool fP2PBridge = false; /*bool fPassthrough = pciDevIsPassthrough(aDev);*/ uint8_t u8HeaderType = ich9pciGetByte(aDev, VBOX_PCI_HEADER_TYPE); for (uint32_t i = 0; i < len; i++) { bool fWritable = false; bool fRom = false; switch (u8HeaderType) { case 0x00: /* normal device */ case 0x80: /* multi-function device */ switch (addr) { /* Read-only registers */ case VBOX_PCI_VENDOR_ID: case VBOX_PCI_VENDOR_ID+1: case VBOX_PCI_DEVICE_ID: case VBOX_PCI_DEVICE_ID+1: case VBOX_PCI_REVISION_ID: case VBOX_PCI_CLASS_PROG: case VBOX_PCI_CLASS_SUB: case VBOX_PCI_CLASS_BASE: case VBOX_PCI_HEADER_TYPE: case VBOX_PCI_SUBSYSTEM_VENDOR_ID: case VBOX_PCI_SUBSYSTEM_VENDOR_ID+1: case VBOX_PCI_SUBSYSTEM_ID: case VBOX_PCI_SUBSYSTEM_ID+1: case VBOX_PCI_ROM_ADDRESS: case VBOX_PCI_ROM_ADDRESS+1: case VBOX_PCI_ROM_ADDRESS+2: case VBOX_PCI_ROM_ADDRESS+3: case VBOX_PCI_CAPABILITY_LIST: case VBOX_PCI_INTERRUPT_PIN: fWritable = false; break; /* Others can be written */ default: fWritable = true; break; } break; case 0x01: /* PCI-PCI bridge */ fP2PBridge = true; switch (addr) { /* Read-only registers */ case VBOX_PCI_VENDOR_ID: case VBOX_PCI_VENDOR_ID+1: case VBOX_PCI_DEVICE_ID: case VBOX_PCI_DEVICE_ID+1: case VBOX_PCI_REVISION_ID: case VBOX_PCI_CLASS_PROG: case VBOX_PCI_CLASS_SUB: case VBOX_PCI_CLASS_BASE: case VBOX_PCI_HEADER_TYPE: case VBOX_PCI_ROM_ADDRESS_BR: case VBOX_PCI_ROM_ADDRESS_BR+1: case VBOX_PCI_ROM_ADDRESS_BR+2: case VBOX_PCI_ROM_ADDRESS_BR+3: case VBOX_PCI_INTERRUPT_PIN: fWritable = false; break; default: fWritable = true; break; } break; default: AssertMsgFailed(("Unknown header type %x\n", PCIDevGetHeaderType(aDev))); fWritable = false; break; } uint8_t u8Val = (uint8_t)val; switch (addr) { case VBOX_PCI_COMMAND: /* Command register, bits 0-7. */ fUpdateMappings = true; goto default_case; case VBOX_PCI_COMMAND+1: /* Command register, bits 8-15. */ /* don't change reserved bits (11-15) */ u8Val &= UINT32_C(~0xf8); fUpdateMappings = true; goto default_case; case VBOX_PCI_STATUS: /* Status register, bits 0-7. */ /* don't change read-only bits => actually all lower bits are read-only */ u8Val &= UINT32_C(~0xff); /* status register, low part: clear bits by writing a '1' to the corresponding bit */ aDev->config[addr] &= ~u8Val; break; case VBOX_PCI_STATUS+1: /* Status register, bits 8-15. */ /* don't change read-only bits */ u8Val &= UINT32_C(~0x06); /* status register, high part: clear bits by writing a '1' to the corresponding bit */ aDev->config[addr] &= ~u8Val; break; case VBOX_PCI_ROM_ADDRESS: case VBOX_PCI_ROM_ADDRESS +1: case VBOX_PCI_ROM_ADDRESS +2: case VBOX_PCI_ROM_ADDRESS +3: fRom = true; case VBOX_PCI_BASE_ADDRESS_0: case VBOX_PCI_BASE_ADDRESS_0+1: case VBOX_PCI_BASE_ADDRESS_0+2: case VBOX_PCI_BASE_ADDRESS_0+3: case VBOX_PCI_BASE_ADDRESS_1: case VBOX_PCI_BASE_ADDRESS_1+1: case VBOX_PCI_BASE_ADDRESS_1+2: case VBOX_PCI_BASE_ADDRESS_1+3: case VBOX_PCI_BASE_ADDRESS_2: case VBOX_PCI_BASE_ADDRESS_2+1: case VBOX_PCI_BASE_ADDRESS_2+2: case VBOX_PCI_BASE_ADDRESS_2+3: case VBOX_PCI_BASE_ADDRESS_3: case VBOX_PCI_BASE_ADDRESS_3+1: case VBOX_PCI_BASE_ADDRESS_3+2: case VBOX_PCI_BASE_ADDRESS_3+3: case VBOX_PCI_BASE_ADDRESS_4: case VBOX_PCI_BASE_ADDRESS_4+1: case VBOX_PCI_BASE_ADDRESS_4+2: case VBOX_PCI_BASE_ADDRESS_4+3: case VBOX_PCI_BASE_ADDRESS_5: case VBOX_PCI_BASE_ADDRESS_5+1: case VBOX_PCI_BASE_ADDRESS_5+2: case VBOX_PCI_BASE_ADDRESS_5+3: { /* We check that, as same PCI register numbers as BARs may mean different registers for bridges */ if (fP2PBridge) goto default_case; else { int iRegion = fRom ? VBOX_PCI_ROM_SLOT : (addr - VBOX_PCI_BASE_ADDRESS_0) >> 2; int iOffset = addr & 0x3; ich9pciWriteBarByte(aDev, iRegion, iOffset, u8Val); fUpdateMappings = true; } break; } default: default_case: if (fWritable) PCIDevSetByte(aDev, addr, u8Val); } addr++; val >>= 8; } if (fUpdateMappings) /* if the command/base address register is modified, we must modify the mappings */ ich9pciUpdateMappings(aDev); } static bool assignPosition(PICH9PCIBUS pBus, PPCIDEVICE pPciDev, const char *pszName, int iDevFn, PciAddress* aPosition) { NOREF(pszName); aPosition->iBus = 0; aPosition->iDeviceFunc = iDevFn; aPosition->iRegister = 0; /* N/A */ /* Explicit slot request */ if (iDevFn >= 0 && iDevFn < (int)RT_ELEMENTS(pBus->apDevices)) return true; int iStartPos = 0; /* Otherwise when assigning a slot, we need to make sure all its functions are available */ for (int iPos = iStartPos; iPos < (int)RT_ELEMENTS(pBus->apDevices); iPos += 8) { if ( !pBus->apDevices[iPos] && !pBus->apDevices[iPos + 1] && !pBus->apDevices[iPos + 2] && !pBus->apDevices[iPos + 3] && !pBus->apDevices[iPos + 4] && !pBus->apDevices[iPos + 5] && !pBus->apDevices[iPos + 6] && !pBus->apDevices[iPos + 7]) { pciDevClearRequestedDevfunc(pPciDev); aPosition->iDeviceFunc = iPos; return true; } } return false; } #ifdef SOME_UNUSED_FUNCTION static bool hasHardAssignedDevsInSlot(PICH9PCIBUS pBus, int iSlot) { PCIDevice** aSlot = &pBus->apDevices[iSlot << 3]; return (aSlot[0] && pciDevIsRequestedDevfunc(aSlot[0])) || (aSlot[1] && pciDevIsRequestedDevfunc(aSlot[1])) || (aSlot[2] && pciDevIsRequestedDevfunc(aSlot[2])) || (aSlot[3] && pciDevIsRequestedDevfunc(aSlot[3])) || (aSlot[4] && pciDevIsRequestedDevfunc(aSlot[4])) || (aSlot[5] && pciDevIsRequestedDevfunc(aSlot[5])) || (aSlot[6] && pciDevIsRequestedDevfunc(aSlot[6])) || (aSlot[7] && pciDevIsRequestedDevfunc(aSlot[7])) ; } #endif static int ich9pciRegisterInternal(PICH9PCIBUS pBus, int iDev, PPCIDEVICE pPciDev, const char *pszName) { PciAddress aPosition; aPosition.iBus = 0; aPosition.iDeviceFunc = 0; aPosition.iRegister = 0; /* * Find device position */ if (!assignPosition(pBus, pPciDev, pszName, iDev, &aPosition)) { AssertMsgFailed(("Couldn't asssign position!\n")); return VERR_PDM_TOO_PCI_MANY_DEVICES; } AssertMsgReturn(aPosition.iBus == 0, ("Assigning behind the bridge not implemented yet\n"), VERR_PDM_TOO_PCI_MANY_DEVICES); iDev = aPosition.iDeviceFunc; /* * Check if we can really take this slot, possibly by relocating * its current habitant, if it wasn't hard assigned too. */ if (pciDevIsRequestedDevfunc(pPciDev) && pBus->apDevices[iDev] && pciDevIsRequestedDevfunc(pBus->apDevices[iDev])) { AssertReleaseMsgFailed(("Configuration error:'%s' and '%s' are both configured as device %d\n", pszName, pBus->apDevices[iDev]->name, iDev)); return VERR_INTERNAL_ERROR; } if (pBus->apDevices[iDev]) { /* if we got here, we shall (and usually can) relocate the device */ bool assigned = assignPosition(pBus, pBus->apDevices[iDev], pBus->apDevices[iDev]->name, -1, &aPosition); AssertMsgReturn(aPosition.iBus == 0, ("Assigning behind the bridge not implemented yet\n"), VERR_PDM_TOO_PCI_MANY_DEVICES); int iRelDev = aPosition.iDeviceFunc; if (!assigned || iRelDev == iDev) { AssertMsgFailed(("Couldn't find free spot!\n")); return VERR_PDM_TOO_PCI_MANY_DEVICES; } /* Copy device function by function to its new position */ for (int i = 0; i < 8; i++) { if (!pBus->apDevices[iDev + i]) continue; Log(("PCI: relocating '%s' from slot %#x to %#x\n", pBus->apDevices[iDev + i]->name, iDev + i, iRelDev + i)); pBus->apDevices[iRelDev + i] = pBus->apDevices[iDev + i]; pBus->apDevices[iRelDev + i]->devfn = iRelDev + i; pBus->apDevices[iDev + i] = NULL; } } /* * Fill in device information. */ pPciDev->devfn = iDev; pPciDev->name = pszName; pPciDev->Int.s.pBusR3 = pBus; pPciDev->Int.s.pBusR0 = MMHyperR3ToR0(PDMDevHlpGetVM(pBus->CTX_SUFF(pDevIns)), pBus); pPciDev->Int.s.pBusRC = MMHyperR3ToRC(PDMDevHlpGetVM(pBus->CTX_SUFF(pDevIns)), pBus); pPciDev->Int.s.pfnConfigRead = ich9pciConfigReadDev; pPciDev->Int.s.pfnConfigWrite = ich9pciConfigWriteDev; pBus->apDevices[iDev] = pPciDev; if (pciDevIsPci2PciBridge(pPciDev)) { AssertMsg(pBus->cBridges < RT_ELEMENTS(pBus->apDevices), ("Number of bridges exceeds the number of possible devices on the bus\n")); AssertMsg(pPciDev->Int.s.pfnBridgeConfigRead && pPciDev->Int.s.pfnBridgeConfigWrite, ("device is a bridge but does not implement read/write functions\n")); Log2(("Setting bridge %d on bus %p\n", pBus->cBridges, pBus)); pBus->papBridgesR3[pBus->cBridges] = pPciDev; pBus->cBridges++; } Log(("PCI: Registered device %d function %d on bus %d (%#x) '%s'.\n", iDev >> 3, iDev & 7, pBus->iBus, 0x80000000 | (iDev << 8), pszName)); return VINF_SUCCESS; } static void printIndent(PCDBGFINFOHLP pHlp, int iIndent) { for (int i = 0; i < iIndent; i++) { pHlp->pfnPrintf(pHlp, " "); } } static void ich9pciBusInfo(PICH9PCIBUS pBus, PCDBGFINFOHLP pHlp, int iIndent, bool fRegisters) { for (uint32_t iDev = 0; iDev < RT_ELEMENTS(pBus->apDevices); iDev++) { PPCIDEVICE pPciDev = pBus->apDevices[iDev]; if (pPciDev != NULL) { printIndent(pHlp, iIndent); /* * For passthrough devices MSI/MSI-X mostly reflects the way interrupts delivered to the guest, * as host driver handles real devices interrupts. */ pHlp->pfnPrintf(pHlp, "%02x:%02x:%02x %s%s: %04x-%04x", pBus->iBus, (iDev >> 3) & 0xff, iDev & 0x7, pPciDev->name, pciDevIsPassthrough(pPciDev) ? " (PASSTHROUGH)" : "", ich9pciGetWord(pPciDev, VBOX_PCI_VENDOR_ID), ich9pciGetWord(pPciDev, VBOX_PCI_DEVICE_ID) ); if (ich9pciGetByte(pPciDev, VBOX_PCI_INTERRUPT_PIN) != 0) pHlp->pfnPrintf(pHlp, " IRQ%d", ich9pciGetByte(pPciDev, VBOX_PCI_INTERRUPT_LINE)); pHlp->pfnPrintf(pHlp, "\n"); if (pciDevIsMsiCapable(pPciDev) || pciDevIsMsixCapable(pPciDev)) { printIndent(pHlp, iIndent + 2); if (pciDevIsMsiCapable(pPciDev)) pHlp->pfnPrintf(pHlp, "MSI:%s ", MsiIsEnabled(pPciDev) ? "on" : "off"); if (pciDevIsMsixCapable(pPciDev)) pHlp->pfnPrintf(pHlp, "MSI-X:%s ", MsixIsEnabled(pPciDev) ? "on" : "off"); pHlp->pfnPrintf(pHlp, "\n"); } uint16_t iCmd = ich9pciGetWord(pPciDev, VBOX_PCI_COMMAND); if ((iCmd & (VBOX_PCI_COMMAND_IO | VBOX_PCI_COMMAND_MEMORY)) != 0) { for (int iRegion = 0; iRegion < PCI_NUM_REGIONS; iRegion++) { PCIIORegion* pRegion = &pPciDev->Int.s.aIORegions[iRegion]; uint64_t iRegionSize = pRegion->size; if (iRegionSize == 0) continue; uint32_t u32Addr = ich9pciGetDWord(pPciDev, ich9pciGetRegionReg(iRegion)); const char * pszDesc; char szDescBuf[128]; bool f64Bit = !!(pRegion->type & PCI_ADDRESS_SPACE_BAR64); if (pRegion->type & PCI_ADDRESS_SPACE_IO) { pszDesc = "IO"; u32Addr &= ~0x3; } else { RTStrPrintf(szDescBuf, sizeof(szDescBuf), "MMIO%s%s", f64Bit ? "64" : "32", (pRegion->type & PCI_ADDRESS_SPACE_MEM_PREFETCH) ? " PREFETCH" : ""); pszDesc = szDescBuf; u32Addr &= ~0xf; } printIndent(pHlp, iIndent + 2); pHlp->pfnPrintf(pHlp, "%s region #%d: %x..%x\n", pszDesc, iRegion, u32Addr, u32Addr+iRegionSize); if (f64Bit) iRegion++; } } printIndent(pHlp, iIndent + 2); uint16_t iStatus = ich9pciGetWord(pPciDev, VBOX_PCI_STATUS); pHlp->pfnPrintf(pHlp, "Command: %04X, Status: %04X\n", iCmd, iStatus); printIndent(pHlp, iIndent + 2); pHlp->pfnPrintf(pHlp, "Bus master: %s\n", iCmd & VBOX_PCI_COMMAND_MASTER ? "Yes" : "No"); if (fRegisters) { printIndent(pHlp, iIndent + 2); pHlp->pfnPrintf(pHlp, "PCI registers:\n"); for (int iReg = 0; iReg < 0x100; ) { int iPerLine = 0x10; Assert (0x100 % iPerLine == 0); printIndent(pHlp, iIndent + 3); while (iPerLine-- > 0) { pHlp->pfnPrintf(pHlp, "%02x ", ich9pciGetByte(pPciDev, iReg++)); } pHlp->pfnPrintf(pHlp, "\n"); } } } } if (pBus->cBridges > 0) { printIndent(pHlp, iIndent); pHlp->pfnPrintf(pHlp, "Registered %d bridges, subordinate buses info follows\n", pBus->cBridges); for (uint32_t iBridge = 0; iBridge < pBus->cBridges; iBridge++) { PICH9PCIBUS pBusSub = PDMINS_2_DATA(pBus->papBridgesR3[iBridge]->pDevIns, PICH9PCIBUS); ich9pciBusInfo(pBusSub, pHlp, iIndent + 1, fRegisters); } } } /** * Info handler, device version. * * @param pDevIns Device instance which registered the info. * @param pHlp Callback functions for doing output. * @param pszArgs Argument string. Optional and specific to the handler. */ static DECLCALLBACK(void) ich9pciInfo(PPDMDEVINS pDevIns, PCDBGFINFOHLP pHlp, const char *pszArgs) { PICH9PCIBUS pBus = DEVINS_2_PCIBUS(pDevIns); if (pszArgs == NULL || !strcmp(pszArgs, "basic")) { ich9pciBusInfo(pBus, pHlp, 0, false); } else if (!strcmp(pszArgs, "verbose")) { ich9pciBusInfo(pBus, pHlp, 0, true); } else { pHlp->pfnPrintf(pHlp, "Invalid argument. Recognized arguments are 'basic', 'verbose'.\n"); } } static DECLCALLBACK(int) ich9pciConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { Assert(iInstance == 0); PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); /* * Validate and read configuration. */ if (!CFGMR3AreValuesValid(pCfg, "IOAPIC\0" "GCEnabled\0" "R0Enabled\0" "McfgBase\0" "McfgLength\0" )) return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES; /* query whether we got an IOAPIC */ bool fUseIoApic; int rc = CFGMR3QueryBoolDef(pCfg, "IOAPIC", &fUseIoApic, false); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to query boolean value \"IOAPIC\"")); /* check if RC code is enabled. */ bool fGCEnabled; rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &fGCEnabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to query boolean value \"GCEnabled\"")); /* check if R0 code is enabled. */ bool fR0Enabled; rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &fR0Enabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to query boolean value \"R0Enabled\"")); Log(("PCI: fUseIoApic=%RTbool fGCEnabled=%RTbool fR0Enabled=%RTbool\n", fUseIoApic, fGCEnabled, fR0Enabled)); /* * Init data. */ PICH9PCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); PICH9PCIBUS pBus = &pGlobals->aPciBus; /* Zero out everything */ memset(pGlobals, 0, sizeof(*pGlobals)); /* And fill values */ if (!fUseIoApic) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Must use IO-APIC with ICH9 chipset")); rc = CFGMR3QueryU64Def(pCfg, "McfgBase", &pGlobals->u64PciConfigMMioAddress, 0); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to read \"McfgBase\"")); rc = CFGMR3QueryU64Def(pCfg, "McfgLength", &pGlobals->u64PciConfigMMioLength, 0); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to read \"McfgLength\"")); pGlobals->pDevInsR3 = pDevIns; pGlobals->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pGlobals->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pGlobals->aPciBus.pDevInsR3 = pDevIns; pGlobals->aPciBus.pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pGlobals->aPciBus.pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pGlobals->aPciBus.papBridgesR3 = (PPCIDEVICE *)PDMDevHlpMMHeapAllocZ(pDevIns, sizeof(PPCIDEVICE) * RT_ELEMENTS(pGlobals->aPciBus.apDevices)); /* * Register bus */ PDMPCIBUSREG PciBusReg; PciBusReg.u32Version = PDM_PCIBUSREG_VERSION; PciBusReg.pfnRegisterR3 = ich9pciRegister; PciBusReg.pfnRegisterMsiR3 = ich9pciRegisterMsi; PciBusReg.pfnIORegionRegisterR3 = ich9pciIORegionRegister; PciBusReg.pfnSetConfigCallbacksR3 = ich9pciSetConfigCallbacks; PciBusReg.pfnSetIrqR3 = ich9pciSetIrq; PciBusReg.pfnFakePCIBIOSR3 = ich9pciFakePCIBIOS; PciBusReg.pszSetIrqRC = fGCEnabled ? "ich9pciSetIrq" : NULL; PciBusReg.pszSetIrqR0 = fR0Enabled ? "ich9pciSetIrq" : NULL; rc = PDMDevHlpPCIBusRegister(pDevIns, &PciBusReg, &pBus->pPciHlpR3); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to register ourselves as a PCI Bus")); if (pBus->pPciHlpR3->u32Version != PDM_PCIHLPR3_VERSION) return PDMDevHlpVMSetError(pDevIns, VERR_VERSION_MISMATCH, RT_SRC_POS, N_("PCI helper version mismatch; got %#x expected %#x"), pBus->pPciHlpR3->u32Version, PDM_PCIHLPR3_VERSION); pBus->pPciHlpRC = pBus->pPciHlpR3->pfnGetRCHelpers(pDevIns); pBus->pPciHlpR0 = pBus->pPciHlpR3->pfnGetR0Helpers(pDevIns); /* * Fill in PCI configs and add them to the bus. */ /** @todo: Disabled for now because this causes error messages with Linux guests. * The guest loads the x38_edac device which tries to map a memory region * using an address given at place 0x48 - 0x4f in the PCi config space. * This fails. because we don't register such a region. */ #if 0 /* Host bridge device */ PCIDevSetVendorId( &pBus->aPciDev, 0x8086); /* Intel */ PCIDevSetDeviceId( &pBus->aPciDev, 0x29e0); /* Desktop */ PCIDevSetRevisionId(&pBus->aPciDev, 0x01); /* rev. 01 */ PCIDevSetClassBase( &pBus->aPciDev, 0x06); /* bridge */ PCIDevSetClassSub( &pBus->aPciDev, 0x00); /* Host/PCI bridge */ PCIDevSetClassProg( &pBus->aPciDev, 0x00); /* Host/PCI bridge */ PCIDevSetHeaderType(&pBus->aPciDev, 0x00); /* bridge */ PCIDevSetWord(&pBus->aPciDev, VBOX_PCI_SEC_STATUS, 0x0280); /* secondary status */ pBus->aPciDev.pDevIns = pDevIns; /* We register Host<->PCI controller on the bus */ ich9pciRegisterInternal(pBus, 0, &pBus->aPciDev, "dram"); #endif /* * Register I/O ports and save state. */ rc = PDMDevHlpIOPortRegister(pDevIns, 0x0cf8, 1, NULL, ich9pciIOPortAddressWrite, ich9pciIOPortAddressRead, NULL, NULL, "ICH9 (PCI)"); if (RT_FAILURE(rc)) return rc; rc = PDMDevHlpIOPortRegister(pDevIns, 0x0cfc, 4, NULL, ich9pciIOPortDataWrite, ich9pciIOPortDataRead, NULL, NULL, "ICH9 (PCI)"); if (RT_FAILURE(rc)) return rc; if (fGCEnabled) { rc = PDMDevHlpIOPortRegisterRC(pDevIns, 0x0cf8, 1, NIL_RTGCPTR, "ich9pciIOPortAddressWrite", "ich9pciIOPortAddressRead", NULL, NULL, "ICH9 (PCI)"); if (RT_FAILURE(rc)) return rc; rc = PDMDevHlpIOPortRegisterRC(pDevIns, 0x0cfc, 4, NIL_RTGCPTR, "ich9pciIOPortDataWrite", "ich9pciIOPortDataRead", NULL, NULL, "ICH9 (PCI)"); if (RT_FAILURE(rc)) return rc; } if (fR0Enabled) { rc = PDMDevHlpIOPortRegisterR0(pDevIns, 0x0cf8, 1, NIL_RTR0PTR, "ich9pciIOPortAddressWrite", "ich9pciIOPortAddressRead", NULL, NULL, "ICH9 (PCI)"); if (RT_FAILURE(rc)) return rc; rc = PDMDevHlpIOPortRegisterR0(pDevIns, 0x0cfc, 4, NIL_RTR0PTR, "ich9pciIOPortDataWrite", "ich9pciIOPortDataRead", NULL, NULL, "ICH9 (PCI)"); if (RT_FAILURE(rc)) return rc; } if (pGlobals->u64PciConfigMMioAddress != 0) { rc = PDMDevHlpMMIORegister(pDevIns, pGlobals->u64PciConfigMMioAddress, pGlobals->u64PciConfigMMioLength, NULL /*pvUser*/, IOMMMIO_FLAGS_READ_PASSTHRU | IOMMMIO_FLAGS_WRITE_PASSTHRU, ich9pciMcfgMMIOWrite, ich9pciMcfgMMIORead, "MCFG ranges"); AssertMsgRCReturn(rc, ("rc=%Rrc %#llx/%#llx\n", rc, pGlobals->u64PciConfigMMioAddress, pGlobals->u64PciConfigMMioLength), rc); if (fGCEnabled) { rc = PDMDevHlpMMIORegisterRC(pDevIns, pGlobals->u64PciConfigMMioAddress, pGlobals->u64PciConfigMMioLength, NIL_RTRCPTR /*pvUser*/, "ich9pciMcfgMMIOWrite", "ich9pciMcfgMMIORead"); AssertRCReturn(rc, rc); } if (fR0Enabled) { rc = PDMDevHlpMMIORegisterR0(pDevIns, pGlobals->u64PciConfigMMioAddress, pGlobals->u64PciConfigMMioLength, NIL_RTR0PTR /*pvUser*/, "ich9pciMcfgMMIOWrite", "ich9pciMcfgMMIORead"); AssertRCReturn(rc, rc); } } rc = PDMDevHlpSSMRegisterEx(pDevIns, VBOX_ICH9PCI_SAVED_STATE_VERSION_CURRENT, sizeof(*pBus) + 16*128, "pgm", NULL, NULL, NULL, NULL, ich9pciR3SaveExec, NULL, NULL, ich9pciR3LoadExec, NULL); if (RT_FAILURE(rc)) return rc; /** @todo: other chipset devices shall be registered too */ PDMDevHlpDBGFInfoRegister(pDevIns, "pci", "Display PCI bus status. Recognizes 'basic' or 'verbose' " "as arguments, defaults to 'basic'.", ich9pciInfo); return VINF_SUCCESS; } static void ich9pciResetDevice(PPCIDEVICE pDev) { /* Clear regions */ for (int iRegion = 0; iRegion < PCI_NUM_REGIONS; iRegion++) { PCIIORegion* pRegion = &pDev->Int.s.aIORegions[iRegion]; if (pRegion->size == 0) continue; ich9pciUnmapRegion(pDev, iRegion); } if (pciDevIsPassthrough(pDev)) { // no reset handler - we can do what we need in PDM reset handler // @todo: is it correct? } else { PCIDevSetCommand(pDev, PCIDevGetCommand(pDev) & ~(VBOX_PCI_COMMAND_IO | VBOX_PCI_COMMAND_MEMORY | VBOX_PCI_COMMAND_MASTER | VBOX_PCI_COMMAND_SPECIAL | VBOX_PCI_COMMAND_PARITY | VBOX_PCI_COMMAND_SERR | VBOX_PCI_COMMAND_FAST_BACK | VBOX_PCI_COMMAND_INTX_DISABLE)); /* Bridge device reset handlers processed later */ if (!pciDevIsPci2PciBridge(pDev)) { PCIDevSetByte(pDev, VBOX_PCI_CACHE_LINE_SIZE, 0x0); PCIDevSetInterruptLine(pDev, 0x0); } /* Reset MSI message control. */ if (pciDevIsMsiCapable(pDev)) { /* Extracted from MsiPciConfigWrite(). */ pDev->config[pDev->Int.s.u8MsiCapOffset + VBOX_MSI_CAP_MESSAGE_CONTROL] &= 0x8e; } /* Reset MSI-X message control. */ if (pciDevIsMsixCapable(pDev)) { /* Extracted from MsixPciConfigWrite(); no side effects. */ pDev->config[pDev->Int.s.u8MsixCapOffset + VBOX_MSIX_CAP_MESSAGE_CONTROL + 1] &= 0x3f; } } } /** * @copydoc FNPDMDEVRESET */ static DECLCALLBACK(void) ich9pciReset(PPDMDEVINS pDevIns) { PICH9PCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); PICH9PCIBUS pBus = &pGlobals->aPciBus; /* PCI-specific reset for each device. */ for (uint32_t i = 0; i < RT_ELEMENTS(pBus->apDevices); i++) { if (pBus->apDevices[i]) ich9pciResetDevice(pBus->apDevices[i]); } for (uint32_t iBridge = 0; iBridge < pBus->cBridges; iBridge++) { if (pBus->papBridgesR3[iBridge]) ich9pcibridgeReset(pBus->papBridgesR3[iBridge]->pDevIns); } ich9pciFakePCIBIOS(pDevIns); } static void ich9pciRelocateDevice(PPCIDEVICE pDev, RTGCINTPTR offDelta) { if (pDev) { pDev->Int.s.pBusRC += offDelta; if (pDev->Int.s.pMsixPageRC) pDev->Int.s.pMsixPageRC += offDelta; } } /** * @copydoc FNPDMDEVRELOCATE */ static DECLCALLBACK(void) ich9pciRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta) { PICH9PCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PICH9PCIGLOBALS); PICH9PCIBUS pBus = &pGlobals->aPciBus; pGlobals->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pBus->pPciHlpRC = pBus->pPciHlpR3->pfnGetRCHelpers(pDevIns); pBus->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); /* Relocate RC pointers for the attached pci devices. */ for (uint32_t i = 0; i < RT_ELEMENTS(pBus->apDevices); i++) ich9pciRelocateDevice(pBus->apDevices[i], offDelta); } /** * @interface_method_impl{PDMDEVREG,pfnConstruct} */ static DECLCALLBACK(int) ich9pcibridgeConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); /* * Validate and read configuration. */ if (!CFGMR3AreValuesValid(pCfg, "GCEnabled\0" "R0Enabled\0")) return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES; /* check if RC code is enabled. */ bool fGCEnabled; int rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &fGCEnabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to query boolean value \"GCEnabled\"")); /* check if R0 code is enabled. */ bool fR0Enabled; rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &fR0Enabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to query boolean value \"R0Enabled\"")); Log(("PCI: fGCEnabled=%RTbool fR0Enabled=%RTbool\n", fGCEnabled, fR0Enabled)); /* * Init data and register the PCI bus. */ PICH9PCIBUS pBus = PDMINS_2_DATA(pDevIns, PICH9PCIBUS); pBus->pDevInsR3 = pDevIns; pBus->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pBus->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pBus->papBridgesR3 = (PPCIDEVICE *)PDMDevHlpMMHeapAllocZ(pDevIns, sizeof(PPCIDEVICE) * RT_ELEMENTS(pBus->apDevices)); PDMPCIBUSREG PciBusReg; PciBusReg.u32Version = PDM_PCIBUSREG_VERSION; PciBusReg.pfnRegisterR3 = ich9pcibridgeRegister; PciBusReg.pfnRegisterMsiR3 = ich9pciRegisterMsi; PciBusReg.pfnIORegionRegisterR3 = ich9pciIORegionRegister; PciBusReg.pfnSetConfigCallbacksR3 = ich9pciSetConfigCallbacks; PciBusReg.pfnSetIrqR3 = ich9pcibridgeSetIrq; PciBusReg.pfnFakePCIBIOSR3 = NULL; /* Only needed for the first bus. */ PciBusReg.pszSetIrqRC = fGCEnabled ? "ich9pcibridgeSetIrq" : NULL; PciBusReg.pszSetIrqR0 = fR0Enabled ? "ich9pcibridgeSetIrq" : NULL; rc = PDMDevHlpPCIBusRegister(pDevIns, &PciBusReg, &pBus->pPciHlpR3); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to register ourselves as a PCI Bus")); if (pBus->pPciHlpR3->u32Version != PDM_PCIHLPR3_VERSION) return PDMDevHlpVMSetError(pDevIns, VERR_VERSION_MISMATCH, RT_SRC_POS, N_("PCI helper version mismatch; got %#x expected %#x"), pBus->pPciHlpR3->u32Version, PDM_PCIHLPR3_VERSION); pBus->pPciHlpRC = pBus->pPciHlpR3->pfnGetRCHelpers(pDevIns); pBus->pPciHlpR0 = pBus->pPciHlpR3->pfnGetR0Helpers(pDevIns); /* Disable default device locking. */ rc = PDMDevHlpSetDeviceCritSect(pDevIns, PDMDevHlpCritSectGetNop(pDevIns)); AssertRCReturn(rc, rc); /* * Fill in PCI configs and add them to the bus. */ PCIDevSetVendorId( &pBus->aPciDev, 0x8086); /* Intel */ PCIDevSetDeviceId( &pBus->aPciDev, 0x2448); /* 82801 Mobile PCI bridge. */ PCIDevSetRevisionId(&pBus->aPciDev, 0xf2); PCIDevSetClassSub( &pBus->aPciDev, 0x04); /* pci2pci */ PCIDevSetClassBase( &pBus->aPciDev, 0x06); /* PCI_bridge */ PCIDevSetClassProg( &pBus->aPciDev, 0x01); /* Supports subtractive decoding. */ PCIDevSetHeaderType(&pBus->aPciDev, 0x01); /* Single function device which adheres to the PCI-to-PCI bridge spec. */ PCIDevSetCommand( &pBus->aPciDev, 0x00); PCIDevSetStatus( &pBus->aPciDev, 0x20); /* 66MHz Capable. */ PCIDevSetInterruptLine(&pBus->aPciDev, 0x00); /* This device does not assert interrupts. */ /* * This device does not generate interrupts. Interrupt delivery from * devices attached to the bus is unaffected. */ PCIDevSetInterruptPin (&pBus->aPciDev, 0x00); pBus->aPciDev.pDevIns = pDevIns; /* Bridge-specific data */ pciDevSetPci2PciBridge(&pBus->aPciDev); pBus->aPciDev.Int.s.pfnBridgeConfigRead = ich9pcibridgeConfigRead; pBus->aPciDev.Int.s.pfnBridgeConfigWrite = ich9pcibridgeConfigWrite; /* * Register this PCI bridge. The called function will take care on which bus we will get registered. */ rc = PDMDevHlpPCIRegister (pDevIns, &pBus->aPciDev); if (RT_FAILURE(rc)) return rc; /* * The iBus property doesn't really represent the bus number * because the guest and the BIOS can choose different bus numbers * for them. * The bus number is mainly for the setIrq function to indicate * when the host bus is reached which will have iBus = 0. * That's why the + 1. */ pBus->iBus = iInstance + 1; /* * Register SSM handlers. We use the same saved state version as for the host bridge * to make changes easier. */ rc = PDMDevHlpSSMRegisterEx(pDevIns, VBOX_ICH9PCI_SAVED_STATE_VERSION_CURRENT, sizeof(*pBus) + 16*128, "pgm" /* before */, NULL, NULL, NULL, NULL, ich9pcibridgeR3SaveExec, NULL, NULL, ich9pcibridgeR3LoadExec, NULL); if (RT_FAILURE(rc)) return rc; return VINF_SUCCESS; } /** * @copydoc FNPDMDEVRESET */ static void ich9pcibridgeReset(PPDMDEVINS pDevIns) { PICH9PCIBUS pBus = PDMINS_2_DATA(pDevIns, PICH9PCIBUS); /* Reset config space to default values. */ PCIDevSetByte(&pBus->aPciDev, VBOX_PCI_PRIMARY_BUS, 0); PCIDevSetByte(&pBus->aPciDev, VBOX_PCI_SECONDARY_BUS, 0); PCIDevSetByte(&pBus->aPciDev, VBOX_PCI_SUBORDINATE_BUS, 0); /* PCI-specific reset for each device. */ for (uint32_t i = 0; i < RT_ELEMENTS(pBus->apDevices); i++) { if (pBus->apDevices[i]) ich9pciResetDevice(pBus->apDevices[i]); } } /** * @copydoc FNPDMDEVRELOCATE */ static DECLCALLBACK(void) ich9pcibridgeRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta) { PICH9PCIBUS pBus = PDMINS_2_DATA(pDevIns, PICH9PCIBUS); pBus->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); /* Relocate RC pointers for the attached pci devices. */ for (uint32_t i = 0; i < RT_ELEMENTS(pBus->apDevices); i++) ich9pciRelocateDevice(pBus->apDevices[i], offDelta); } /** * The PCI bus device registration structure. */ const PDMDEVREG g_DevicePciIch9 = { /* u32Version */ PDM_DEVREG_VERSION, /* szName */ "ich9pci", /* szRCMod */ "VBoxDDRC.rc", /* szR0Mod */ "VBoxDDR0.r0", /* pszDescription */ "ICH9 PCI bridge", /* fFlags */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0, /* fClass */ PDM_DEVREG_CLASS_BUS_PCI | PDM_DEVREG_CLASS_BUS_ISA, /* cMaxInstances */ 1, /* cbInstance */ sizeof(ICH9PCIGLOBALS), /* pfnConstruct */ ich9pciConstruct, /* pfnDestruct */ NULL, /* pfnRelocate */ ich9pciRelocate, /* pfnMemSetup */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ ich9pciReset, /* pfnSuspend */ NULL, /* pfnResume */ NULL, /* pfnAttach */ NULL, /* pfnDetach */ NULL, /* pfnQueryInterface */ NULL, /* pfnInitComplete */ NULL, /* pfnPowerOff */ NULL, /* pfnSoftReset */ NULL, /* u32VersionEnd */ PDM_DEVREG_VERSION }; /** * The device registration structure * for the PCI-to-PCI bridge. */ const PDMDEVREG g_DevicePciIch9Bridge = { /* u32Version */ PDM_DEVREG_VERSION, /* szName */ "ich9pcibridge", /* szRCMod */ "VBoxDDRC.rc", /* szR0Mod */ "VBoxDDR0.r0", /* pszDescription */ "ICH9 PCI to PCI bridge", /* fFlags */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0, /* fClass */ PDM_DEVREG_CLASS_BUS_PCI, /* cMaxInstances */ ~0U, /* cbInstance */ sizeof(ICH9PCIBUS), /* pfnConstruct */ ich9pcibridgeConstruct, /* pfnDestruct */ NULL, /* pfnRelocate */ ich9pcibridgeRelocate, /* pfnMemSetup */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ NULL, /* Must be NULL, to make sure only bus driver handles reset */ /* pfnSuspend */ NULL, /* pfnResume */ NULL, /* pfnAttach */ NULL, /* pfnDetach */ NULL, /* pfnQueryInterface */ NULL, /* pfnInitComplete */ NULL, /* pfnPowerOff */ NULL, /* pfnSoftReset */ NULL, /* u32VersionEnd */ PDM_DEVREG_VERSION }; #endif /* IN_RING3 */ #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */