/* $Id: DevEFI.h 76553 2019-01-01 01:45:53Z vboxsync $ */ /** @file * EFI for VirtualBox Common Definitions. * * WARNING: This header is used by both firmware and VBox device, * thus don't put anything here but numeric constants or helper * inline functions. */ /* * Copyright (C) 2009-2019 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___EFI_VBoxEFI_h #define ___EFI_VBoxEFI_h #ifndef RT_WITHOUT_PRAGMA_ONCE # pragma once #endif /** @defgroup grp_devefi DevEFI <-> Firmware Interfaces * @{ */ /** The base of the I/O ports used for interaction between the EFI firmware and DevEFI. */ #define EFI_PORT_BASE 0xEF10 /**< @todo r=klaus stupid choice which causes trouble with PCI resource allocation in complex bridge setups, change to 0x0400 with appropriate saved state and reset handling */ /** The number of ports. */ #define EFI_PORT_COUNT 0x0008 /** Information querying. * 32-bit write sets the info index and resets the reading, see EfiInfoIndex. * 32-bit read returns the size of the info (in bytes). * 8-bit reads returns the info as a byte sequence. */ #define EFI_INFO_PORT (EFI_PORT_BASE+0x0) /** * Information requests. */ typedef enum { EFI_INFO_INDEX_INVALID = 0, EFI_INFO_INDEX_VOLUME_BASE, EFI_INFO_INDEX_VOLUME_SIZE, EFI_INFO_INDEX_TEMPMEM_BASE, EFI_INFO_INDEX_TEMPMEM_SIZE, EFI_INFO_INDEX_STACK_BASE, EFI_INFO_INDEX_STACK_SIZE, EFI_INFO_INDEX_BOOT_ARGS, EFI_INFO_INDEX_DEVICE_PROPS, EFI_INFO_INDEX_FSB_FREQUENCY, EFI_INFO_INDEX_CPU_FREQUENCY, EFI_INFO_INDEX_TSC_FREQUENCY, EFI_INFO_INDEX_GRAPHICS_MODE, EFI_INFO_INDEX_HORIZONTAL_RESOLUTION, EFI_INFO_INDEX_VERTICAL_RESOLUTION, EFI_INFO_INDEX_MCFG_BASE, EFI_INFO_INDEX_MCFG_SIZE, EFI_INFO_INDEX_END } EfiInfoIndex; /** Panic port. * Write causes action to be taken according to the value written, * see the EFI_PANIC_CMD_* defines below. * Reading from the port has no effect. */ #define EFI_PANIC_PORT (EFI_PORT_BASE+0x1) /** @defgroup grp_devefi_panic_cmd Panic Commands for EFI_PANIC_PORT * @{ */ /** Used by the EfiThunk.asm to signal ORG inconsistency. */ #define EFI_PANIC_CMD_BAD_ORG 1 /** Used by the EfiThunk.asm to signal unexpected trap or interrupt. */ #define EFI_PANIC_CMD_THUNK_TRAP 2 /** Starts a panic message. * Makes sure the panic message buffer is empty. */ #define EFI_PANIC_CMD_START_MSG 3 /** Ends a panic message and enters guru meditation state. */ #define EFI_PANIC_CMD_END_MSG 4 /** The first panic message command. * The low byte of the command is the char to be added to the panic message. */ #define EFI_PANIC_CMD_MSG_FIRST 0x4201 /** The last panic message command. */ #define EFI_PANIC_CMD_MSG_LAST 0x427f /** Makes a panic message command from a char. */ #define EFI_PANIC_CMD_MSG_FROM_CHAR(ch) (0x4200 | ((ch) & 0x7f) ) /** Extracts the char from a panic message command. */ #define EFI_PANIC_CMD_MSG_GET_CHAR(u32) ((u32) & 0x7f) /** @} */ /** Undefined port. */ #define EFI_PORT_UNDEFINED (EFI_PORT_BASE+0x2) /** Debug logging. * The chars written goes to the log. * Reading has no effect. * @remarks The port number is the same as on of those used by the PC BIOS. */ #define EFI_DEBUG_PORT (EFI_PORT_BASE+0x3) #define VBOX_EFI_DEBUG_BUFFER 512 /** The top of the EFI stack. * The firmware expects a 128KB stack. * @todo Move this to 1MB + 128KB and drop the stack relocation the firmware * does. It expects the stack to be within the temporary memory that * SEC hands to PEI and the VBoxAutoScan PEIM reports. */ #define VBOX_EFI_TOP_OF_STACK 0x300000 #define EFI_PORT_VARIABLE_OP (EFI_PORT_BASE+0x4) #define EFI_PORT_VARIABLE_PARAM (EFI_PORT_BASE+0x5) #define EFI_VARIABLE_OP_QUERY 0xdead0001 #define EFI_VARIABLE_OP_QUERY_NEXT 0xdead0002 #define EFI_VARIABLE_OP_QUERY_REWIND 0xdead0003 #define EFI_VARIABLE_OP_ADD 0xdead0010 #define EFI_VARIABLE_OP_STATUS_OK 0xcafe0000 #define EFI_VARIABLE_OP_STATUS_ERROR 0xcafe0001 #define EFI_VARIABLE_OP_STATUS_NOT_FOUND 0xcafe0002 #define EFI_VARIABLE_OP_STATUS_WP 0xcafe0003 #define EFI_VARIABLE_OP_STATUS_BSY 0xcafe0010 /** The max number of variables allowed. */ #define EFI_VARIABLE_MAX 128 /** The max variable name length (in bytes, including the zero terminator). */ #define EFI_VARIABLE_NAME_MAX 1024 /** The max value length (in bytes). */ #define EFI_VARIABLE_VALUE_MAX 1024 typedef enum { EFI_VM_VARIABLE_OP_START = 0, EFI_VM_VARIABLE_OP_RESERVED_USED_TO_BE_END, EFI_VM_VARIABLE_OP_RESERVED_USED_TO_BE_INDEX, EFI_VM_VARIABLE_OP_GUID, EFI_VM_VARIABLE_OP_ATTRIBUTE, EFI_VM_VARIABLE_OP_NAME, EFI_VM_VARIABLE_OP_NAME_LENGTH, EFI_VM_VARIABLE_OP_VALUE, EFI_VM_VARIABLE_OP_VALUE_LENGTH, EFI_VM_VARIABLE_OP_ERROR, EFI_VM_VARIABLE_OP_NAME_UTF16, EFI_VM_VARIABLE_OP_NAME_LENGTH_UTF16, EFI_VM_VARIABLE_OP_MAX, EFI_VM_VARIABLE_OP_32BIT_HACK = 0x7fffffff } EFIVAROP; /** Debug point. */ #define EFI_PORT_DEBUG_POINT (EFI_PORT_BASE + 0x6) /** * EFI debug points. */ typedef enum EFIDBGPOINT { /** Invalid. */ EFIDBGPOINT_INVALID = 0, /** DEBUG_AGENT_INIT_PREMEM_SEC. */ EFIDBGPOINT_SEC_PREMEM = 1, /** DEBUG_AGENT_INIT_POST_SEC. */ EFIDBGPOINT_SEC_POSTMEM, /** DEBUG_AGENT_INIT_DXE_CORE. */ EFIDBGPOINT_DXE_CORE, /** DEBUG_AGENT_INIT_. */ EFIDBGPOINT_SMM, /** DEBUG_AGENT_INIT_ENTER_SMI. */ EFIDBGPOINT_SMI_ENTER, /** DEBUG_AGENT_INIT_EXIT_SMI. */ EFIDBGPOINT_SMI_EXIT, /** DEBUG_AGENT_INIT_S3. */ EFIDBGPOINT_GRAPHICS, /** DEBUG_AGENT_INIT_DXE_AP. */ EFIDBGPOINT_DXE_AP, /** End of valid points. */ EFIDBGPOINT_END, /** Blow up the type to 32-bits. */ EFIDBGPOINT_32BIT_HACK = 0x7fffffff } EFIDBGPOINT; /** EFI image load or unload event. All writes are 32-bit writes. */ #define EFI_PORT_IMAGE_EVENT (EFI_PORT_BASE + 0x7) /** @defgroup grp_devefi_image_evt EFI Image Events (EFI_PORT_IMAGE_EVENT). * * The lower 8-bit of the values written to EFI_PORT_IMAGE_EVENT can be seen as * the command. The start and complete commands does not have any additional * payload. The other commands uses bit 8 thru 23 or 8 thru 15 to pass a value. * * @{ */ /** The command mask. */ #define EFI_IMAGE_EVT_CMD_MASK UINT32_C(0x000000ff) /** Get the payload value. */ #define EFI_IMAGE_EVT_GET_PAYLOAD(a_u32) ((a_u32) >> 8) /** Get the payload value as unsigned 16-bit. */ #define EFI_IMAGE_EVT_GET_PAYLOAD_U16(a_u32) ( EFI_IMAGE_EVT_GET_PAYLOAD(a_u32) & UINT16_MAX ) /** Get the payload value as unsigned 8-bit. */ #define EFI_IMAGE_EVT_GET_PAYLOAD_U8(a_u32) ( EFI_IMAGE_EVT_GET_PAYLOAD(a_u32) & UINT8_MAX ) /** Combines a command and a payload value. */ #define EFI_IMAGE_EVT_MAKE(a_uCmd, a_uPayload) ( ((a_uCmd) & UINT32_C(0xff)) | (uint32_t)((a_uPayload) << 8) ) /** Invalid. */ #define EFI_IMAGE_EVT_CMD_INVALID UINT32_C(0x00000000) /** The event is complete. */ #define EFI_IMAGE_EVT_CMD_COMPLETE UINT32_C(0x00000001) /** Starts a 32-bit load event. Requires name and address, size is optional. */ #define EFI_IMAGE_EVT_CMD_START_LOAD32 UINT32_C(0x00000002) /** Starts a 64-bit load event. Requires name and address, size is optional. */ #define EFI_IMAGE_EVT_CMD_START_LOAD64 UINT32_C(0x00000003) /** Starts a 32-bit unload event. Requires name and address. */ #define EFI_IMAGE_EVT_CMD_START_UNLOAD32 UINT32_C(0x00000004) /** Starts a 64-bit unload event. Requires name and address. */ #define EFI_IMAGE_EVT_CMD_START_UNLOAD64 UINT32_C(0x00000005) /** Starts a 32-bit relocation event. RRequires new and old base address. */ #define EFI_IMAGE_EVT_CMD_START_RELOC32 UINT32_C(0x0000000A) /** Starts a 64-bit relocation event. Requires new and old base address. */ #define EFI_IMAGE_EVT_CMD_START_RELOC64 UINT32_C(0x0000000B) /** The command for writing to the second address register (64-bit). * Takes a 16-bit payload value. The register value is shifted 16-bits * to the left and then the payload is ORed in. */ #define EFI_IMAGE_EVT_CMD_ADDR0 UINT32_C(0x00000006) /** The command for writing to the second address register (64-bit). * Takes a 16-bit payload value. The register value is shifted 16-bits * to the left and then the payload is ORed in. */ #define EFI_IMAGE_EVT_CMD_ADDR1 UINT32_C(0x00000007) /** The command for writing to the first size register (64-bit). * Takes a 16-bit payload value. The register value is shifted 16-bits * to the left and then the payload is ORed in. */ #define EFI_IMAGE_EVT_CMD_SIZE0 UINT32_C(0x00000008) /** The command for appending a character to the module name. * Takes a 7-bit payload value that. The value is appended to the field if * there is room. */ #define EFI_IMAGE_EVT_CMD_NAME UINT32_C(0x00000009) /** @} */ /** @} */ #endif