| 1 | ## @file MdeModulePkg.dec
|
|---|
| 2 | # This package provides the modules that conform to UEFI/PI Industry standards.
|
|---|
| 3 | # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
|
|---|
| 4 | # and libraries instances, which are used for those modules.
|
|---|
| 5 | #
|
|---|
| 6 | # Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
|
|---|
| 7 | # This program and the accompanying materials are licensed and made available under
|
|---|
| 8 | # the terms and conditions of the BSD License that accompanies this distribution.
|
|---|
| 9 | # The full text of the license may be found at
|
|---|
| 10 | # http://opensource.org/licenses/bsd-license.php.
|
|---|
| 11 | #
|
|---|
| 12 | # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|---|
| 13 | # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|---|
| 14 | #
|
|---|
| 15 | ##
|
|---|
| 16 |
|
|---|
| 17 |
|
|---|
| 18 | [Defines]
|
|---|
| 19 | DEC_SPECIFICATION = 0x00010005
|
|---|
| 20 | PACKAGE_NAME = MdeModulePkg
|
|---|
| 21 | PACKAGE_UNI_FILE = MdeModulePkg.uni
|
|---|
| 22 | PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
|
|---|
| 23 | PACKAGE_VERSION = 0.94
|
|---|
| 24 |
|
|---|
| 25 | [Includes]
|
|---|
| 26 | Include
|
|---|
| 27 |
|
|---|
| 28 |
|
|---|
| 29 | [LibraryClasses]
|
|---|
| 30 | ## @libraryclass IpIo layer upon EFI IP4 Protocol.
|
|---|
| 31 | # This library is only intended to be used by UEFI network stack modules.
|
|---|
| 32 | IpIoLib|Include/Library/IpIoLib.h
|
|---|
| 33 |
|
|---|
| 34 | ## @libraryclass Basic function for UEFI network stack.
|
|---|
| 35 | # This library is only intended to be used by UEFI network stack modules.
|
|---|
| 36 | NetLib|Include/Library/NetLib.h
|
|---|
| 37 |
|
|---|
| 38 | ## @libraryclass The helper routines to access UDP service.
|
|---|
| 39 | # This library is only intended to be used by UEFI network stack modules.
|
|---|
| 40 | UdpIoLib|Include/Library/UdpIoLib.h
|
|---|
| 41 |
|
|---|
| 42 | ## @libraryclass The helper routines to access TCP service.
|
|---|
| 43 | # This library is only intended to be used by UEFI network stack modules.
|
|---|
| 44 | TcpIoLib|Include/Library/TcpIoLib.h
|
|---|
| 45 |
|
|---|
| 46 | ## @libraryclass Defines a set of methods to reset whole system.
|
|---|
| 47 | ResetSystemLib|Include/Library/ResetSystemLib.h
|
|---|
| 48 |
|
|---|
| 49 | ## @libraryclass Defines a set of methods related do S3 mode.
|
|---|
| 50 | # This library class is no longer used and modules using this library should
|
|---|
| 51 | # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
|
|---|
| 52 | S3Lib|Include/Library/S3Lib.h
|
|---|
| 53 |
|
|---|
| 54 | ## @libraryclass Defines a set of methods related recovery mode.
|
|---|
| 55 | # This library class is no longer used and modules using this library should
|
|---|
| 56 | # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
|
|---|
| 57 | RecoveryLib|Include/Library/RecoveryLib.h
|
|---|
| 58 |
|
|---|
| 59 | ## @libraryclass Provides HII related functions.
|
|---|
| 60 | HiiLib|Include/Library/HiiLib.h
|
|---|
| 61 |
|
|---|
| 62 | ## @libraryclass Defines a set of interfaces on how to process capusle image update.
|
|---|
| 63 | CapsuleLib|Include/Library/CapsuleLib.h
|
|---|
| 64 |
|
|---|
| 65 | ## @libraryclass Library for Deferred Procedure Calls.
|
|---|
| 66 | DpcLib|Include/Library/DpcLib.h
|
|---|
| 67 |
|
|---|
| 68 | ## @libraryclass Provides global variables that are pointers
|
|---|
| 69 | # to the UEFI HII related protocols.
|
|---|
| 70 | #
|
|---|
| 71 | UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
|
|---|
| 72 |
|
|---|
| 73 | ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
|
|---|
| 74 | #
|
|---|
| 75 | SecurityManagementLib|Include/Library/SecurityManagementLib.h
|
|---|
| 76 |
|
|---|
| 77 | ## @libraryclass OEM status code libary is used to report status code to OEM device.
|
|---|
| 78 | #
|
|---|
| 79 | OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
|
|---|
| 80 |
|
|---|
| 81 | ## @libraryclass Debug Agent is used to provide soft debug capability.
|
|---|
| 82 | #
|
|---|
| 83 | DebugAgentLib|Include/Library/DebugAgentLib.h
|
|---|
| 84 |
|
|---|
| 85 | ## @libraryclass Provide platform specific hooks.
|
|---|
| 86 | #
|
|---|
| 87 | PlatformHookLib|Include/Library/PlatformHookLib.h
|
|---|
| 88 |
|
|---|
| 89 | ## @libraryclass Provide platform specific hooks for SMM core.
|
|---|
| 90 | #
|
|---|
| 91 | SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
|
|---|
| 92 |
|
|---|
| 93 | ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
|
|---|
| 94 | #
|
|---|
| 95 | LockBoxLib|Include/Library/LockBoxLib.h
|
|---|
| 96 |
|
|---|
| 97 | ## @libraryclass Provide the CPU exception handler.
|
|---|
| 98 | #
|
|---|
| 99 | CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
|
|---|
| 100 |
|
|---|
| 101 | ## @libraryclass Provides platform specific display interface.
|
|---|
| 102 | #
|
|---|
| 103 | CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
|
|---|
| 104 |
|
|---|
| 105 | [Guids]
|
|---|
| 106 | ## MdeModule package token space guid
|
|---|
| 107 | # Include/Guid/MdeModulePkgTokenSpace.h
|
|---|
| 108 | gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
|
|---|
| 109 |
|
|---|
| 110 | ## Hob guid for Pcd DataBase
|
|---|
| 111 | # Include/Guid/PcdDataBaseHobGuid.h
|
|---|
| 112 | gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
|
|---|
| 113 |
|
|---|
| 114 | ## Guid for PCD DataBase signature.
|
|---|
| 115 | # Include/Guid/PcdDataBaseSignatureGuid.h
|
|---|
| 116 | gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
|
|---|
| 117 |
|
|---|
| 118 | ## Guid for EDKII implementation GUIDed opcodes
|
|---|
| 119 | # Include/Guid/MdeModuleHii.h
|
|---|
| 120 | gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
|
|---|
| 121 |
|
|---|
| 122 | ## Guid for Framework vfr GUIDed opcodes.
|
|---|
| 123 | # Include/Guid/MdeModuleHii.h
|
|---|
| 124 | gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
|
|---|
| 125 |
|
|---|
| 126 | ## Guid to specify the System Non Volatile FV
|
|---|
| 127 | # Include/Guid/SystemNvDataGuid.h
|
|---|
| 128 | gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
|
|---|
| 129 |
|
|---|
| 130 | ## GUID used as the signature of FTW working block header.
|
|---|
| 131 | # Include/Guid/SystemNvDataGuid.h
|
|---|
| 132 | gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
|
|---|
| 133 |
|
|---|
| 134 | ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
|
|---|
| 135 | # Include/Guid/FaultTolerantWrite.h
|
|---|
| 136 | gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
|
|---|
| 137 |
|
|---|
| 138 | ## Guid specify the device is the console out device.
|
|---|
| 139 | # Include/Guid/ConsoleOutDevice.h
|
|---|
| 140 | gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|---|
| 141 |
|
|---|
| 142 | ## Guid specify the device is the console in device.
|
|---|
| 143 | # Include/Guid/ConsoleInDevice.h
|
|---|
| 144 | gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|---|
| 145 |
|
|---|
| 146 | ## Hob and Variable guid specify the platform memory type information.
|
|---|
| 147 | # Include/Guid/MemoryTypeInformation.h
|
|---|
| 148 | gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
|
|---|
| 149 |
|
|---|
| 150 | ## Capsule update hob and variable guid
|
|---|
| 151 | # Include/Guid/CapsuleVendor.h
|
|---|
| 152 | gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
|
|---|
| 153 |
|
|---|
| 154 | ## Guid specifiy the device is the StdErr device.
|
|---|
| 155 | # Include/Guid/StandardErrorDevice.h
|
|---|
| 156 | gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|---|
| 157 |
|
|---|
| 158 | ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
|
|---|
| 159 | # Include/Guid/VariableFormat.h
|
|---|
| 160 | gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
|
|---|
| 161 |
|
|---|
| 162 | # Include/Guid/VariableIndexTable.h
|
|---|
| 163 | gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
|
|---|
| 164 |
|
|---|
| 165 | ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
|
|---|
| 166 | # Include/Guid/SmmVariableCommon.h
|
|---|
| 167 | gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
|
|---|
| 168 |
|
|---|
| 169 | ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
|
|---|
| 170 | # Include/Guid/Performance.h
|
|---|
| 171 | gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
|
|---|
| 172 | gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
|
|---|
| 173 | gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
|
|---|
| 174 | gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
|
|---|
| 175 |
|
|---|
| 176 | ## Guid is defined for CRC32 encapsulation scheme.
|
|---|
| 177 | # Include/Guid/Crc32GuidedSectionExtraction.h
|
|---|
| 178 | gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
|
|---|
| 179 |
|
|---|
| 180 | ## Include/Guid/NicIp4ConfigNvData.h
|
|---|
| 181 | gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
|
|---|
| 182 |
|
|---|
| 183 | ## Include/Guid/StatusCodeCallbackGuid.h
|
|---|
| 184 | gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
|
|---|
| 185 |
|
|---|
| 186 | ## GUID identifies status code records HOB that originate from the PEI status code
|
|---|
| 187 | # Include/Guid/MemoryStatusCodeRecord.h
|
|---|
| 188 | gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
|
|---|
| 189 |
|
|---|
| 190 | ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
|
|---|
| 191 | # Include/Guid/StatusCodeDataTypeDebug.h
|
|---|
| 192 | gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
|
|---|
| 193 |
|
|---|
| 194 | ## A configuration Table Guid for Load module at fixed address
|
|---|
| 195 | # Include/Guid/LoadModuleAtFixedAddress.h
|
|---|
| 196 | gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
|
|---|
| 197 |
|
|---|
| 198 | ## GUID used to store the global debug mask value into an EFI Variable
|
|---|
| 199 | # Include/Guid/DebugMask.h
|
|---|
| 200 | gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
|
|---|
| 201 |
|
|---|
| 202 | ## Event for the DXE Core to signal idle events
|
|---|
| 203 | # Include/Guid/EventIdle.h
|
|---|
| 204 | gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
|
|---|
| 205 |
|
|---|
| 206 | ## Include/Guid/RecoveryDevice.h
|
|---|
| 207 | gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
|
|---|
| 208 |
|
|---|
| 209 | ## Include/Guid/RecoveryDevice.h
|
|---|
| 210 | gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
|
|---|
| 211 |
|
|---|
| 212 | ## Include/Guid/RecoveryDevice.h
|
|---|
| 213 | gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
|
|---|
| 214 |
|
|---|
| 215 | ## Include/Guid/RecoveryDevice.h
|
|---|
| 216 | gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
|
|---|
| 217 |
|
|---|
| 218 | ## Include/Guid/SmmLockBox.h
|
|---|
| 219 | gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
|
|---|
| 220 |
|
|---|
| 221 | ## Include/Guid/AcpiS3Context.h
|
|---|
| 222 | gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
|
|---|
| 223 |
|
|---|
| 224 | ## Include/Guid/AcpiS3Context.h
|
|---|
| 225 | gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
|
|---|
| 226 |
|
|---|
| 227 | ## Include/Guid/BootScriptExecutorVariable.h
|
|---|
| 228 | gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
|
|---|
| 229 | gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
|
|---|
| 230 |
|
|---|
| 231 | ## Include/Guid/UsbKeyBoardLayout.h
|
|---|
| 232 | gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
|
|---|
| 233 | gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
|
|---|
| 234 |
|
|---|
| 235 | ## Include/Guid/HiiResourceSampleHii.h
|
|---|
| 236 | gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
|
|---|
| 237 |
|
|---|
| 238 | ## Include/Guid/DriverSampleHii.h
|
|---|
| 239 | gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
|
|---|
| 240 | gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
|
|---|
| 241 | gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
|
|---|
| 242 |
|
|---|
| 243 | ## Include/Guid/PlatDriOverrideHii.h
|
|---|
| 244 | gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
|
|---|
| 245 |
|
|---|
| 246 | ## Include/Guid/Ip4ConfigHii.h
|
|---|
| 247 | gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}
|
|---|
| 248 |
|
|---|
| 249 | ## Include/Guid/VlanConfigHii.h
|
|---|
| 250 | gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
|
|---|
| 251 |
|
|---|
| 252 | ## Include/Guid/Ip4IScsiConfigHii.h
|
|---|
| 253 | gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
|
|---|
| 254 | gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
|
|---|
| 255 |
|
|---|
| 256 | ## Include/Guid/ZeroGuid.h
|
|---|
| 257 | gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
|
|---|
| 258 |
|
|---|
| 259 | ## Include/Guid/MtcVendor.h
|
|---|
| 260 | gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
|
|---|
| 261 |
|
|---|
| 262 | ## Guid for Firmware Performance Data Table (FPDT) implementation.
|
|---|
| 263 | # Include/Guid/FirmwarePerformance.h
|
|---|
| 264 | gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
|
|---|
| 265 | gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
|
|---|
| 266 |
|
|---|
| 267 | ## Include/Guid/ExitBootServiceFailed.h
|
|---|
| 268 | gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
|
|---|
| 269 |
|
|---|
| 270 | ## Include/Guid/ConnectConInEvent.h
|
|---|
| 271 | gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
|
|---|
| 272 |
|
|---|
| 273 | ## Include/Guid/StatusCodeDataTypeVariable.h
|
|---|
| 274 | gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
|
|---|
| 275 |
|
|---|
| 276 | ## Include/Guid/MemoryProfile.h
|
|---|
| 277 | gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
|
|---|
| 278 |
|
|---|
| 279 | ## GUID indicates the LZMA custom compress/decompress algorithm.
|
|---|
| 280 | # Include/Guid/LzmaDecompress.h
|
|---|
| 281 | gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
|
|---|
| 282 | gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
|
|---|
| 283 |
|
|---|
| 284 | [Ppis]
|
|---|
| 285 | ## Include/Ppi/AtaController.h
|
|---|
| 286 | gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
|
|---|
| 287 |
|
|---|
| 288 | ## Include/Ppi/UsbHostController.h
|
|---|
| 289 | gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
|
|---|
| 290 |
|
|---|
| 291 | ## Include/Ppi/Usb2HostController.h
|
|---|
| 292 | gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
|
|---|
| 293 |
|
|---|
| 294 | ## Include/Ppi/UsbController.h
|
|---|
| 295 | gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
|
|---|
| 296 |
|
|---|
| 297 | ## Include/Ppi/UsbIo.h
|
|---|
| 298 | gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
|
|---|
| 299 |
|
|---|
| 300 | ## Include/Ppi/Capsule.h
|
|---|
| 301 | gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}
|
|---|
| 302 |
|
|---|
| 303 | ## Include/Ppi/SecPerformance.h
|
|---|
| 304 | gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
|
|---|
| 305 |
|
|---|
| 306 | ## Include/Ppi/SmmCommunication.h
|
|---|
| 307 | gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
|
|---|
| 308 |
|
|---|
| 309 | ## Include/Ppi/SmmAccess.h
|
|---|
| 310 | gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
|
|---|
| 311 |
|
|---|
| 312 | ## Include/Ppi/SmmControl.h
|
|---|
| 313 | gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
|
|---|
| 314 |
|
|---|
| 315 | ## Include/Ppi/PostBootScriptTable.h
|
|---|
| 316 | gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
|
|---|
| 317 |
|
|---|
| 318 | ## Include/Ppi/SerialPortPei.h
|
|---|
| 319 | gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
|
|---|
| 320 |
|
|---|
| 321 | ## Include/Ppi/UfsHostController.h
|
|---|
| 322 | gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
|
|---|
| 323 |
|
|---|
| 324 | [Protocols]
|
|---|
| 325 | ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
|
|---|
| 326 | # Include/Protocol/LoadPe32Image.h
|
|---|
| 327 | # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
|
|---|
| 328 | # If developer need implement such functionality, they should use BasePeCoffLib.
|
|---|
| 329 | gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
|
|---|
| 330 |
|
|---|
| 331 | ## Print protocol defines basic print functions to print the format unicode and ascii string.
|
|---|
| 332 | # Include/Protocol/Print2.h
|
|---|
| 333 | gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
|
|---|
| 334 |
|
|---|
| 335 | ## This protocol defines the generic memory test interfaces in Dxe phase.
|
|---|
| 336 | # Include/Protocol/GenericMemoryTest.h
|
|---|
| 337 | gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
|
|---|
| 338 |
|
|---|
| 339 | ## Include/Protocol/Dpc.h
|
|---|
| 340 | gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
|
|---|
| 341 |
|
|---|
| 342 | ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
|
|---|
| 343 | # Include/Protocol/FaultTolerantWrite.h
|
|---|
| 344 | gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
|
|---|
| 345 |
|
|---|
| 346 | ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
|
|---|
| 347 | # Include/Protocol/SmmFaultTolerantWrite.h
|
|---|
| 348 | gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
|
|---|
| 349 |
|
|---|
| 350 | ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
|
|---|
| 351 | # Include/Protocol/SwapAddressRange.h
|
|---|
| 352 | gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
|
|---|
| 353 |
|
|---|
| 354 | ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
|
|---|
| 355 | # Include/Protocol/SmmSwapAddressRange.h
|
|---|
| 356 | gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
|
|---|
| 357 |
|
|---|
| 358 | ## This protocol is intended for use as a means to store data in the EFI SMM environment.
|
|---|
| 359 | # Include/Protocol/SmmVariableProtocol.h
|
|---|
| 360 | gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
|
|---|
| 361 |
|
|---|
| 362 | ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
|
|---|
| 363 | # Include/Protocol/VariableLock.h
|
|---|
| 364 | gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
|
|---|
| 365 |
|
|---|
| 366 | ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
|
|---|
| 367 | # Include/Protocol/SmmFirmwareVolumeBlock.h
|
|---|
| 368 | gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
|
|---|
| 369 |
|
|---|
| 370 | ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
|
|---|
| 371 | # Include/Guid/DebugMask.h
|
|---|
| 372 | gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
|
|---|
| 373 |
|
|---|
| 374 | ## Include/Protocol/LockBox.h
|
|---|
| 375 | gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
|
|---|
| 376 |
|
|---|
| 377 | ## Include/Protocol/FormBrowserEx.h
|
|---|
| 378 | gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
|
|---|
| 379 |
|
|---|
| 380 | ## Include/Protocol/EbcVmTest.h
|
|---|
| 381 | gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
|
|---|
| 382 |
|
|---|
| 383 | ## Include/Protocol/EbcSimpleDebugger.h
|
|---|
| 384 | gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
|
|---|
| 385 |
|
|---|
| 386 | ## Include/Protocol/BootLogo.h
|
|---|
| 387 | gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
|
|---|
| 388 |
|
|---|
| 389 | ## Include/Protocol/DisplayProtocol.h
|
|---|
| 390 | gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
|
|---|
| 391 |
|
|---|
| 392 | ## Include/Protocol/FormBrowserEx2.h
|
|---|
| 393 | gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
|
|---|
| 394 |
|
|---|
| 395 | ## Include/Protocol/UfsHostController.h
|
|---|
| 396 | gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
|
|---|
| 397 |
|
|---|
| 398 | #
|
|---|
| 399 | # [Error.gEfiMdeModulePkgTokenSpaceGuid]
|
|---|
| 400 | # 0x80000001 | Invalid value provided.
|
|---|
| 401 | # 0x80000002 | Reserved bits must be set to zero.
|
|---|
| 402 | # 0x80000003 | Incorrect progress code provided.
|
|---|
| 403 | # 0x80000004 | Invalid foreground color specified.
|
|---|
| 404 | # 0x80000005 | Invalid background color specified.
|
|---|
| 405 | # 0x80000006 | Incorrect error code provided.
|
|---|
| 406 | #
|
|---|
| 407 |
|
|---|
| 408 | [PcdsFeatureFlag]
|
|---|
| 409 | ## Indicates if the platform can support update capsule across a system reset.<BR><BR>
|
|---|
| 410 | # TRUE - Supports update capsule across a system reset.<BR>
|
|---|
| 411 | # FALSE - Does not support update capsule across a system reset.<BR>
|
|---|
| 412 | # @Prompt Enable update capsule across a system reset.
|
|---|
| 413 | gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
|
|---|
| 414 |
|
|---|
| 415 | ## Indicates if all PCD PPI services will be enabled.<BR><BR>
|
|---|
| 416 | # TRUE - All PCD PPI services will be produced.<BR>
|
|---|
| 417 | # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
|
|---|
| 418 | # @Prompt Enable full PEI PCD services.
|
|---|
| 419 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
|
|---|
| 420 |
|
|---|
| 421 | ## Indicates if the Device Path To Text Protocol should be produced by the platform.
|
|---|
| 422 | # It can be disabled to save size.<BR><BR>
|
|---|
| 423 | # TRUE - Device Path To Text Protocol will be produced.<BR>
|
|---|
| 424 | # FALSE - Device Path To Text Protocol will not be produced.<BR>
|
|---|
| 425 | # @Prompt Enable Device Path to Text support.
|
|---|
| 426 | gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
|
|---|
| 427 |
|
|---|
| 428 | ## Indicates if the Device Path From Text Protocol should be produced by the platform.
|
|---|
| 429 | # It can be disabled to save size.<BR><BR>
|
|---|
| 430 | # TRUE - Device Path From Text Protocol will be produced.<BR>
|
|---|
| 431 | # FALSE - Device Path From Text Protocol will not be produced.<BR>
|
|---|
| 432 | # @Prompt Enable Device Path From Text support.
|
|---|
| 433 | gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
|
|---|
| 434 |
|
|---|
| 435 | ## Indicates if the statistics about variable usage will be collected. This information is
|
|---|
| 436 | # stored as a vendor configuration table into the EFI system table.
|
|---|
| 437 | # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
|
|---|
| 438 | # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
|
|---|
| 439 | # TRUE - Statistics about variable usage will be collected.<BR>
|
|---|
| 440 | # FALSE - Statistics about variable usage will not be collected.<BR>
|
|---|
| 441 | # @Prompt Enable variable statistics collection.
|
|---|
| 442 | gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
|
|---|
| 443 |
|
|---|
| 444 | ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
|
|---|
| 445 | # TRUE - Installs Unicode Collation Protocol.<BR>
|
|---|
| 446 | # FALSE - Does not install Unicode Collation Protocol.<BR>
|
|---|
| 447 | # @Prompt Enable Unicode Collation support.
|
|---|
| 448 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
|
|---|
| 449 |
|
|---|
| 450 | ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
|
|---|
| 451 | # TRUE - Installs Unicode Collation 2 Protocol.<BR>
|
|---|
| 452 | # FALSE - Does not install Unicode Collation 2 Protocol.<BR>
|
|---|
| 453 | # @Prompt Enable Unicode Collation 2 support.
|
|---|
| 454 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
|
|---|
| 455 |
|
|---|
| 456 | ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
|
|---|
| 457 | # It could be set FALSE to save size.<BR><BR>
|
|---|
| 458 | # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
|
|---|
| 459 | # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
|
|---|
| 460 | # @Prompt Enable ConOut GOP support.
|
|---|
| 461 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
|
|---|
| 462 |
|
|---|
| 463 | ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
|
|---|
| 464 | # It could be set FALSE to save size.<BR><BR>
|
|---|
| 465 | # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
|
|---|
| 466 | # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
|
|---|
| 467 | # @Prompt Enable ConOut UGA support.
|
|---|
| 468 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
|
|---|
| 469 |
|
|---|
| 470 | ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
|
|---|
| 471 | # This PCD is used to tune PEI phase performance to reduce the search image time.
|
|---|
| 472 | # It can be set according to the generated image section type.<BR><BR>
|
|---|
| 473 | # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
|
|---|
| 474 | # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
|
|---|
| 475 | # @Prompt PeiCore search TE section first.
|
|---|
| 476 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
|
|---|
| 477 |
|
|---|
| 478 | ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
|
|---|
| 479 | # interrupt to access usb device in the case of absence of usb stack.
|
|---|
| 480 | # DUET platform requires the token to be TRUE.<BR><BR>
|
|---|
| 481 | # TRUE - Turn off usb legacy support.<BR>
|
|---|
| 482 | # FALSE - Does not turn off usb legacy support.<BR>
|
|---|
| 483 | # @Prompt Turn off USB legacy support.
|
|---|
| 484 | gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
|
|---|
| 485 |
|
|---|
| 486 | ## Indicates if HiiImageProtocol will be installed.
|
|---|
| 487 | # FALSE is for size reduction.<BR><BR>
|
|---|
| 488 | # TRUE - Installs HiiImageProtocol.<BR>
|
|---|
| 489 | # FALSE - Does not install HiiImageProtocol.<BR>
|
|---|
| 490 | # @Prompt Enable HII image support.
|
|---|
| 491 | gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
|
|---|
| 492 |
|
|---|
| 493 | ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
|
|---|
| 494 | # The default keyboard layout serves as the backup when no keyboard layout can be retrieved
|
|---|
| 495 | # from HII database.<BR><BR>
|
|---|
| 496 | # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>
|
|---|
| 497 | # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
|
|---|
| 498 | # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
|
|---|
| 499 | gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
|
|---|
| 500 |
|
|---|
| 501 | ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
|
|---|
| 502 | # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
|
|---|
| 503 | # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
|
|---|
| 504 | # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
|
|---|
| 505 | # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
|
|---|
| 506 | # @Prompt Enable framework backward compatibility support.
|
|---|
| 507 | gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
|
|---|
| 508 |
|
|---|
| 509 | ## Indicates if HelloWorld Application will print the verbose information.
|
|---|
| 510 | # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
|
|---|
| 511 | # TRUE - HelloWorld Application will print the verbose information.<BR>
|
|---|
| 512 | # FALSE - HelloWorld Application will not print the verbose information.<BR>
|
|---|
| 513 | # @Prompt Enable HelloWorld print.
|
|---|
| 514 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
|
|---|
| 515 |
|
|---|
| 516 | ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
|
|---|
| 517 | # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>
|
|---|
| 518 | # FALSE - Only FTW Write service is available.<BR>
|
|---|
| 519 | # @Prompt Enable FULL FTW services.
|
|---|
| 520 | gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
|
|---|
| 521 |
|
|---|
| 522 | ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
|
|---|
| 523 | # TRUE - DXE IPL will support UEFI decompression.<BR>
|
|---|
| 524 | # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
|
|---|
| 525 | # @Prompt Enable UEFI decompression support in DXE IPL.
|
|---|
| 526 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
|
|---|
| 527 |
|
|---|
| 528 | ## Indicates if PciBus driver supports the hot plug device.<BR><BR>
|
|---|
| 529 | # TRUE - PciBus driver supports the hot plug device.<BR>
|
|---|
| 530 | # FALSE - PciBus driver doesn't support the hot plug device.<BR>
|
|---|
| 531 | # @Prompt Enable PciBus hot plug device support.
|
|---|
| 532 | gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
|
|---|
| 533 |
|
|---|
| 534 | ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
|
|---|
| 535 | # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
|
|---|
| 536 | # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
|
|---|
| 537 | # @Prompt Enable PCI bridge IO alignment probe.
|
|---|
| 538 | gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
|
|---|
| 539 |
|
|---|
| 540 | ## Indicates if StatusCode is reported via Serial port.<BR><BR>
|
|---|
| 541 | # TRUE - Reports StatusCode via Serial port.<BR>
|
|---|
| 542 | # FALSE - Does not report StatusCode via Serial port.<BR>
|
|---|
| 543 | # @Prompt Enable StatusCode via Serial port.
|
|---|
| 544 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
|
|---|
| 545 |
|
|---|
| 546 | ## Indicates if StatusCode is stored in memory.
|
|---|
| 547 | # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
|
|---|
| 548 | # TRUE - Stores StatusCode in memory.<BR>
|
|---|
| 549 | # FALSE - Does not store StatusCode in memory.<BR>
|
|---|
| 550 | # @Prompt Enable StatusCode via memory.
|
|---|
| 551 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
|
|---|
| 552 |
|
|---|
| 553 | ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
|
|---|
| 554 | # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>
|
|---|
| 555 | # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
|
|---|
| 556 | # @Prompt Enable PEI StatusCode replay in DXE phase
|
|---|
| 557 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
|
|---|
| 558 |
|
|---|
| 559 | ## Indicates if ACPI SDT protocol will be installed.<BR><BR>
|
|---|
| 560 | # TRUE - Installs ACPI SDT protocol.<BR>
|
|---|
| 561 | # FALSE - Does not install ACPI SDT protocol.<BR>
|
|---|
| 562 | # @Prompt Enable ACPI SDT support.
|
|---|
| 563 | gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
|
|---|
| 564 |
|
|---|
| 565 | ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
|
|---|
| 566 | # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
|
|---|
| 567 | # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
|
|---|
| 568 | # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
|
|---|
| 569 | # @Prompt Enable unaligned PCI I/O support.
|
|---|
| 570 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
|
|---|
| 571 |
|
|---|
| 572 | ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
|
|---|
| 573 | # TRUE - TEXT statement will always be set to GrayOut.<BR>
|
|---|
| 574 | # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
|
|---|
| 575 | # @Prompt Always GrayOut TEXT statement.
|
|---|
| 576 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
|
|---|
| 577 |
|
|---|
| 578 | ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
|
|---|
| 579 | # TRUE - The unselectable menu will be set to GrayOut.<BR>
|
|---|
| 580 | # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
|
|---|
| 581 | # @Prompt GrayOut read only menu.
|
|---|
| 582 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
|
|---|
| 583 |
|
|---|
| 584 | ## Indicates if recovery from IDE disk will be supported.<BR><BR>
|
|---|
| 585 | # TRUE - Supports recovery from IDE disk.<BR>
|
|---|
| 586 | # FALSE - Does not support recovery from IDE disk.<BR>
|
|---|
| 587 | # @Prompt Enable recovery on IDE disk.
|
|---|
| 588 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
|
|---|
| 589 |
|
|---|
| 590 | ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
|
|---|
| 591 | # TRUE - Supports recovery from FAT floppy disk.<BR>
|
|---|
| 592 | # FALSE - Does not support recovery from FAT floppy disk.<BR>
|
|---|
| 593 | # @Prompt Enable recovery on FAT floppy disk.
|
|---|
| 594 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
|
|---|
| 595 |
|
|---|
| 596 | ## Indicates if recovery from data CD will be supported.<BR><BR>
|
|---|
| 597 | # TRUE - Supports recovery from data CD.<BR>
|
|---|
| 598 | # FALSE - Does not support recovery from data CD.<BR>
|
|---|
| 599 | # @Prompt Enable recovery on data CD.
|
|---|
| 600 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
|
|---|
| 601 |
|
|---|
| 602 | ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
|
|---|
| 603 | # TRUE - Supports recovery from USB disk.<BR>
|
|---|
| 604 | # FALSE - Does not support recovery from USB disk.<BR>
|
|---|
| 605 | # @Prompt Enable recovery on FAT USB disk.
|
|---|
| 606 | gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
|
|---|
| 607 |
|
|---|
| 608 | ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
|
|---|
| 609 | # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>
|
|---|
| 610 | # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
|
|---|
| 611 | # @Prompt Enable S3 performance data support.
|
|---|
| 612 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
|
|---|
| 613 |
|
|---|
| 614 | [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
|
|---|
| 615 | ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
|
|---|
| 616 | # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
|
|---|
| 617 | # is built in firmware.<BR><BR>
|
|---|
| 618 | # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
|
|---|
| 619 | # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
|
|---|
| 620 | # @Prompt DxeIpl switch to long mode.
|
|---|
| 621 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
|
|---|
| 622 |
|
|---|
| 623 | ## Indicates if DxeIpl should rebuild page tables. This flag only
|
|---|
| 624 | # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
|
|---|
| 625 | # TRUE - DxeIpl will rebuild page tables.<BR>
|
|---|
| 626 | # FALSE - DxeIpl will not rebuild page tables.<BR>
|
|---|
| 627 | # @Prompt DxeIpl rebuild page tables.
|
|---|
| 628 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
|
|---|
| 629 |
|
|---|
| 630 | [PcdsFixedAtBuild]
|
|---|
| 631 | ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
|
|---|
| 632 | # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
|
|---|
| 633 | # 0: Disable the feature.<BR>
|
|---|
| 634 | # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
|
|---|
| 635 | # @Prompt Enable LMFA feature.
|
|---|
| 636 | # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
|
|---|
| 637 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
|
|---|
| 638 |
|
|---|
| 639 | ## Progress Code for OS Loader LoadImage start.<BR><BR>
|
|---|
| 640 | # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
|
|---|
| 641 | # @Prompt Progress Code for OS Loader LoadImage start.
|
|---|
| 642 | # @ValidList 0x80000003 | 0x03058000
|
|---|
| 643 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
|
|---|
| 644 |
|
|---|
| 645 | ## Progress Code for OS Loader StartImage start.<BR><BR>
|
|---|
| 646 | # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
|
|---|
| 647 | # @Prompt Progress Code for OS Loader StartImage start.
|
|---|
| 648 | # @ValidList 0x80000003 | 0x03058001
|
|---|
| 649 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
|
|---|
| 650 |
|
|---|
| 651 | ## Progress Code for S3 Suspend start.<BR><BR>
|
|---|
| 652 | # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>
|
|---|
| 653 | # @Prompt Progress Code for S3 Suspend start.
|
|---|
| 654 | # @ValidList 0x80000003 | 0x03078000
|
|---|
| 655 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
|
|---|
| 656 |
|
|---|
| 657 | ## Progress Code for S3 Suspend end.<BR><BR>
|
|---|
| 658 | # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>
|
|---|
| 659 | # @Prompt Progress Code for S3 Suspend end.
|
|---|
| 660 | # @ValidList 0x80000003 | 0x03078001
|
|---|
| 661 | gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
|
|---|
| 662 |
|
|---|
| 663 | ## Error Code for SetVariable failure.<BR><BR>
|
|---|
| 664 | # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
|
|---|
| 665 | # @Prompt Error Code for SetVariable failure.
|
|---|
| 666 | # @ValidList 0x80000006 | 0x03058002
|
|---|
| 667 | gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
|
|---|
| 668 |
|
|---|
| 669 | [PcdsFixedAtBuild, PcdsPatchableInModule]
|
|---|
| 670 | ## Dynamic type PCD can be registered callback function for Pcd setting action.
|
|---|
| 671 | # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
|
|---|
| 672 | # for a dynamic PCD used in PEI phase.
|
|---|
| 673 | # @Prompt Max PEI PCD callback number per PCD entry.
|
|---|
| 674 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
|
|---|
| 675 |
|
|---|
| 676 | ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress
|
|---|
| 677 | # to store PCD value.
|
|---|
| 678 | # @Prompt VPD base address.
|
|---|
| 679 | gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
|
|---|
| 680 |
|
|---|
| 681 | ## Maximum number of FV is supported by PeiCore's dispatching.
|
|---|
| 682 | # @Prompt Maximum number of FV supported by PeiCore.
|
|---|
| 683 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
|
|---|
| 684 |
|
|---|
| 685 | ## Maximum File count in every FV is supported by PeiCore's dispatching.
|
|---|
| 686 | # PeiCore supported File type includes PEIM, Combined PEIM and FV.
|
|---|
| 687 | # @Prompt Maximum File count per FV supported by PeiCore.
|
|---|
| 688 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
|
|---|
| 689 |
|
|---|
| 690 | ## Maximum stack size for PeiCore.
|
|---|
| 691 | # @Prompt Maximum stack size for PeiCore.
|
|---|
| 692 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
|
|---|
| 693 |
|
|---|
| 694 | ## Maximum PPI count is supported by PeiCore's PPI database.
|
|---|
| 695 | # @Prompt Maximum PPI count supported by PeiCore.
|
|---|
| 696 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
|
|---|
| 697 |
|
|---|
| 698 | ## The maximum size of a single non-HwErr type variable.
|
|---|
| 699 | # @Prompt Maximum variable size.
|
|---|
| 700 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
|
|---|
| 701 |
|
|---|
| 702 | ## The maximum size of single hardware error record variable.<BR><BR>
|
|---|
| 703 | # In IA32/X64 platforms, this value should be larger than 1KB.<BR>
|
|---|
| 704 | # In IA64 platforms, this value should be larger than 128KB.<BR>
|
|---|
| 705 | # @Prompt Maximum HwErr variable size.
|
|---|
| 706 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
|
|---|
| 707 |
|
|---|
| 708 | ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize.
|
|---|
| 709 | # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
|
|---|
| 710 | # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.
|
|---|
| 711 | # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
|
|---|
| 712 | # @Prompt HwErr variable storage size.
|
|---|
| 713 | gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
|
|---|
| 714 |
|
|---|
| 715 | ## Reclaim variable space at EndOfDxe.<BR><BR>
|
|---|
| 716 | # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
|
|---|
| 717 | # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
|
|---|
| 718 | # @Prompt Reclaim variable space at EndOfDxe.
|
|---|
| 719 | gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
|
|---|
| 720 |
|
|---|
| 721 | ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
|
|---|
| 722 | # @Prompt Variable storage size.
|
|---|
| 723 | gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
|
|---|
| 724 |
|
|---|
| 725 | ## FFS filename to find the ACPI tables.
|
|---|
| 726 | # @Prompt FFS name of ACPI tables storage.
|
|---|
| 727 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
|
|---|
| 728 |
|
|---|
| 729 | ## FFS filename to find the capsule coalesce image.
|
|---|
| 730 | # @Prompt FFS name of capsule coalesce image.
|
|---|
| 731 | gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
|
|---|
| 732 |
|
|---|
| 733 | ## Maximum number of performance log entries during PEI phase.
|
|---|
| 734 | # @Prompt Maximum number of PEI performance log entries.
|
|---|
| 735 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
|
|---|
| 736 |
|
|---|
| 737 | ## RTC Update Timeout Value(microsecond).
|
|---|
| 738 | # @Prompt RTC Update Timeout Value.
|
|---|
| 739 | gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
|
|---|
| 740 |
|
|---|
| 741 | ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
|
|---|
| 742 | # TRUE - 16550 serial port registers are in MMIO space.<BR>
|
|---|
| 743 | # FALSE - 16550 serial port registers are in I/O space.<BR>
|
|---|
| 744 | # @Prompt Serial port registers use MMIO.
|
|---|
| 745 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
|
|---|
| 746 |
|
|---|
| 747 | ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
|
|---|
| 748 | # TRUE - 16550 serial port hardware flow control will be enabled.<BR>
|
|---|
| 749 | # FALSE - 16550 serial port hardware flow control will be disabled.<BR>
|
|---|
| 750 | # @Prompt Enable serial port hardware flow control.
|
|---|
| 751 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
|
|---|
| 752 |
|
|---|
| 753 | ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
|
|---|
| 754 | # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
|
|---|
| 755 | # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
|
|---|
| 756 | # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
|
|---|
| 757 | # @Prompt Enable serial port cable detetion.
|
|---|
| 758 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
|
|---|
| 759 |
|
|---|
| 760 | ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
|
|---|
| 761 | # @Prompt Base address of serial port registers.
|
|---|
| 762 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
|
|---|
| 763 |
|
|---|
| 764 | ## Baud rate for the 16550 serial port. Default is 115200 baud.
|
|---|
| 765 | # @Prompt Baud rate for serial port.
|
|---|
| 766 | # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
|
|---|
| 767 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
|
|---|
| 768 |
|
|---|
| 769 | ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
|
|---|
| 770 | # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
|
|---|
| 771 | # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
|
|---|
| 772 | # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
|
|---|
| 773 | # BIT7..BIT6 - Reserved. Must be 0.<BR>
|
|---|
| 774 | #
|
|---|
| 775 | # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
|
|---|
| 776 | # @Prompt Serial port Line Control settings.
|
|---|
| 777 | # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
|
|---|
| 778 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
|
|---|
| 779 |
|
|---|
| 780 | ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
|
|---|
| 781 | # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>
|
|---|
| 782 | # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>
|
|---|
| 783 | # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>
|
|---|
| 784 | # BIT4..BIT3 - Reserved. Must be 0.<BR>
|
|---|
| 785 | # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>
|
|---|
| 786 | # BIT7..BIT6 - Reserved. Must be 0.<BR>
|
|---|
| 787 | #
|
|---|
| 788 | # Default is to enable and clear all FIFOs.<BR>
|
|---|
| 789 | # @Prompt Serial port FIFO Control settings.
|
|---|
| 790 | # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
|
|---|
| 791 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
|
|---|
| 792 |
|
|---|
| 793 | ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)
|
|---|
| 794 | # to handle all link layers. If the value is non zero, the PCD value will be used as block size.
|
|---|
| 795 | # @Prompt TFTP block size.
|
|---|
| 796 | gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
|
|---|
| 797 |
|
|---|
| 798 | ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
|
|---|
| 799 | # structure. The default value for this PCD is 0, which means that the DXE Core
|
|---|
| 800 | # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
|
|---|
| 801 | # boundary as close to the top of memory as feasible. If this PCD is set to a
|
|---|
| 802 | # value other than 0, then the DXE Core will first attempt to allocate the
|
|---|
| 803 | # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
|
|---|
| 804 | # by this PCD, and if that allocation fails, retry the allocation on a 4MB
|
|---|
| 805 | # boundary as close to the top of memory as feasible.
|
|---|
| 806 | # @Prompt Maximum Efi System Table Pointer address.
|
|---|
| 807 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
|
|---|
| 808 |
|
|---|
| 809 | ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
|
|---|
| 810 | # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>
|
|---|
| 811 | # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
|
|---|
| 812 | # @Prompt Shadow Peim On S3 Boot.
|
|---|
| 813 | gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
|
|---|
| 814 |
|
|---|
| 815 | ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
|
|---|
| 816 | # @Prompt Default OEM ID for ACPI table creation.
|
|---|
| 817 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
|
|---|
| 818 |
|
|---|
| 819 | ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
|
|---|
| 820 | # @Prompt Default OEM Table ID for ACPI table creation.
|
|---|
| 821 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
|
|---|
| 822 |
|
|---|
| 823 | ## Default OEM Revision for ACPI table creation.
|
|---|
| 824 | # @Prompt Default OEM Revision for ACPI table creation.
|
|---|
| 825 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
|
|---|
| 826 |
|
|---|
| 827 | ## Default Creator ID for ACPI table creation.
|
|---|
| 828 | # @Prompt Default Creator ID for ACPI table creation.
|
|---|
| 829 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
|
|---|
| 830 |
|
|---|
| 831 | ## Default Creator Revision for ACPI table creation.
|
|---|
| 832 | # @Prompt Default Creator Revision for ACPI table creation.
|
|---|
| 833 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
|
|---|
| 834 |
|
|---|
| 835 | ## The mask is used to control memory profile behavior.<BR><BR>
|
|---|
| 836 | # BIT0 - Enable UEFI memory profile.<BR>
|
|---|
| 837 | # BIT1 - Enable SMRAM profile.<BR>
|
|---|
| 838 | # @Prompt Memory Profile Property.
|
|---|
| 839 | # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0
|
|---|
| 840 | gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
|
|---|
| 841 |
|
|---|
| 842 | ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
|
|---|
| 843 | # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
|
|---|
| 844 | #
|
|---|
| 845 | # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
|
|---|
| 846 | # EfiReservedMemoryType 0x0001<BR>
|
|---|
| 847 | # EfiLoaderCode 0x0002<BR>
|
|---|
| 848 | # EfiLoaderData 0x0004<BR>
|
|---|
| 849 | # EfiBootServicesCode 0x0008<BR>
|
|---|
| 850 | # EfiBootServicesData 0x0010<BR>
|
|---|
| 851 | # EfiRuntimeServicesCode 0x0020<BR>
|
|---|
| 852 | # EfiRuntimeServicesData 0x0040<BR>
|
|---|
| 853 | # EfiConventionalMemory 0x0080<BR>
|
|---|
| 854 | # EfiUnusableMemory 0x0100<BR>
|
|---|
| 855 | # EfiACPIReclaimMemory 0x0200<BR>
|
|---|
| 856 | # EfiACPIMemoryNVS 0x0400<BR>
|
|---|
| 857 | # EfiMemoryMappedIO 0x0800<BR>
|
|---|
| 858 | # EfiMemoryMappedIOPortSpace 0x1000<BR>
|
|---|
| 859 | # EfiPalCode 0x2000<BR>
|
|---|
| 860 | # EfiPersistentMemory 0x4000<BR>
|
|---|
| 861 | # OS Reserved 0x8000000000000000<BR>
|
|---|
| 862 | #
|
|---|
| 863 | # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
|
|---|
| 864 | #
|
|---|
| 865 | # @Prompt Memory profile memory type.
|
|---|
| 866 | gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
|
|---|
| 867 |
|
|---|
| 868 | ## UART clock frequency is for the baud rate configuration.
|
|---|
| 869 | # @Prompt Serial Port Clock Rate.
|
|---|
| 870 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
|
|---|
| 871 |
|
|---|
| 872 | ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
|
|---|
| 873 | # information that describes the path that contains zero or more PCI to PCI briges
|
|---|
| 874 | # followed by a PCI serial device. Each array entry is 4-bytes in length. The
|
|---|
| 875 | # first byte is the PCI Device Number, then second byte is the PCI Function Number,
|
|---|
| 876 | # and the last two bytes are the offset to the PCI power management capabilities
|
|---|
| 877 | # register used to manage the D0-D3 states. If a PCI power management capabilities
|
|---|
| 878 | # register is not present, then the last two bytes in the offset is set to 0. The
|
|---|
| 879 | # array is terminated by an array entry with a PCI Device Number of 0xFF. For a
|
|---|
| 880 | # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
|
|---|
| 881 | # @Prompt Pci Serial Device Info
|
|---|
| 882 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
|
|---|
| 883 |
|
|---|
| 884 | ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
|
|---|
| 885 | # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
|
|---|
| 886 | gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
|
|---|
| 887 |
|
|---|
| 888 | [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
|
|---|
| 889 | ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
|
|---|
| 890 | # This PCD could be set to 0 then console output would be at max column and max row.
|
|---|
| 891 | # @Prompt Console output row.
|
|---|
| 892 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
|
|---|
| 893 |
|
|---|
| 894 | ## This PCD defines the Console output row. The default value is 80 according to UEFI spec.
|
|---|
| 895 | # This PCD could be set to 0 then console output would be at max column and max row.
|
|---|
| 896 | # @Prompt Console output column.
|
|---|
| 897 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
|
|---|
| 898 |
|
|---|
| 899 | ## This PCD defines the video horizontal resolution.
|
|---|
| 900 | # If this PCD is set to 0 then video resolution would be at highest resolution.
|
|---|
| 901 | # @Prompt Video horizontal resolution.
|
|---|
| 902 | gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
|
|---|
| 903 |
|
|---|
| 904 | ## This PCD defines the video vertical resolution.
|
|---|
| 905 | # If this PCD is set to 0 then video resolution would be at highest resolution.
|
|---|
| 906 | # @Prompt Video vertical resolution.
|
|---|
| 907 | gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
|
|---|
| 908 |
|
|---|
| 909 | [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
|
|---|
| 910 | ## Base address of the NV variable range in flash device.
|
|---|
| 911 | # @Prompt Base address of flash NV variable range.
|
|---|
| 912 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
|
|---|
| 913 |
|
|---|
| 914 | ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
|
|---|
| 915 | # The root cause is that variable driver will use FTW protocol to reclaim variable region.
|
|---|
| 916 | # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
|
|---|
| 917 | # be reflushed through the manner of fault tolerant write.
|
|---|
| 918 | # @Prompt Size of flash NV variable range.
|
|---|
| 919 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
|
|---|
| 920 |
|
|---|
| 921 | ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
|
|---|
| 922 | # @Prompt Base address of flash FTW spare block range.
|
|---|
| 923 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
|
|---|
| 924 |
|
|---|
| 925 | ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
|
|---|
| 926 | # The root cause is that variable driver will use FTW protocol to reclaim variable region.
|
|---|
| 927 | # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
|
|---|
| 928 | # be reflushed through the manner of fault tolerant write.
|
|---|
| 929 | # @Prompt Size of flash FTW spare block range.
|
|---|
| 930 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
|
|---|
| 931 |
|
|---|
| 932 | ## Base address of the FTW working block range in flash device.
|
|---|
| 933 | # @Prompt Base address of flash FTW working block range.
|
|---|
| 934 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
|
|---|
| 935 |
|
|---|
| 936 | ## Size of the FTW working block range.
|
|---|
| 937 | # @Prompt Size of flash FTW working block range.
|
|---|
| 938 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
|
|---|
| 939 |
|
|---|
| 940 | ## 64-bit Base address of the NV variable range in flash device.
|
|---|
| 941 | # @Prompt 64-bit Base address of flash NV variable range.
|
|---|
| 942 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
|
|---|
| 943 |
|
|---|
| 944 | ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
|
|---|
| 945 | # @Prompt 64-bit Base address of flash FTW spare block range.
|
|---|
| 946 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
|
|---|
| 947 |
|
|---|
| 948 | ## 64-bit Base address of the FTW working block range in flash device.
|
|---|
| 949 | # @Prompt 64-bit Base address of flash FTW working block range.
|
|---|
| 950 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
|
|---|
| 951 |
|
|---|
| 952 | ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
|
|---|
| 953 | # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
|
|---|
| 954 | # @Prompt Reserved memory range for EMU variable NV storage.
|
|---|
| 955 | gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
|
|---|
| 956 |
|
|---|
| 957 | ## This PCD defines the times to print hello world string.
|
|---|
| 958 | # This PCD is a sample to explain UINT32 PCD usage.
|
|---|
| 959 | # @Prompt HellowWorld print times.
|
|---|
| 960 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
|
|---|
| 961 |
|
|---|
| 962 | ## This PCD defines the HelloWorld print string.
|
|---|
| 963 | # This PCD is a sample to explain String typed PCD usage.
|
|---|
| 964 | # @Prompt HelloWorld print string.
|
|---|
| 965 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
|
|---|
| 966 |
|
|---|
| 967 | ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
|
|---|
| 968 | # The default max size is 100MB (0x6400000) for more than one large capsule images.
|
|---|
| 969 | # @Prompt Max size of populated capsule.
|
|---|
| 970 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
|
|---|
| 971 |
|
|---|
| 972 | ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
|
|---|
| 973 | # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
|
|---|
| 974 | # @Prompt Max size of non-populated capsule.
|
|---|
| 975 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
|
|---|
| 976 |
|
|---|
| 977 | ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
|
|---|
| 978 | # @Prompt Firmware vendor.
|
|---|
| 979 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
|
|---|
| 980 |
|
|---|
| 981 | ## Firmware revision that is the default revision filled into the EFI System Table.
|
|---|
| 982 | # @Prompt Firmware revision.
|
|---|
| 983 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
|
|---|
| 984 |
|
|---|
| 985 | ## Null-terminated Unicode string that describes the firmware version.
|
|---|
| 986 | # @Prompt Firmware version string.
|
|---|
| 987 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
|
|---|
| 988 |
|
|---|
| 989 | ## Null-terminated Unicode string that contains the date the firmware was released
|
|---|
| 990 | # @Prompt Firmware release data string.
|
|---|
| 991 | gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
|
|---|
| 992 |
|
|---|
| 993 | ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
|
|---|
| 994 | # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
|
|---|
| 995 | # The default value in PeiPhase is 1 KBytes.<BR>
|
|---|
| 996 | # The default value in DxePhase is 128 KBytes.<BR>
|
|---|
| 997 | # @Prompt StatusCode memory size.
|
|---|
| 998 | gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
|
|---|
| 999 |
|
|---|
| 1000 | ## Indicates if to reset system when memory type information changes.<BR><BR>
|
|---|
| 1001 | # TRUE - Resets system when memory type information changes.<BR>
|
|---|
| 1002 | # FALSE - Does not reset system when memory type information changes.<BR>
|
|---|
| 1003 | # @Prompt Reset on memory type information change.
|
|---|
| 1004 | gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
|
|---|
| 1005 |
|
|---|
| 1006 | ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
|
|---|
| 1007 | # Only following values defined in UEFI specification are valid:<BR><BR>
|
|---|
| 1008 | # 0x00 (EFI_BLACK)<BR>
|
|---|
| 1009 | # 0x01 (EFI_BLUE)<BR>
|
|---|
| 1010 | # 0x02 (EFI_GREEN)<BR>
|
|---|
| 1011 | # 0x03 (EFI_CYAN)<BR>
|
|---|
| 1012 | # 0x04 (EFI_RED)<BR>
|
|---|
| 1013 | # 0x05 (EFI_MAGENTA)<BR>
|
|---|
| 1014 | # 0x06 (EFI_BROWN)<BR>
|
|---|
| 1015 | # 0x07 (EFI_LIGHTGRAY)<BR>
|
|---|
| 1016 | # 0x08 (EFI_DARKGRAY)<BR>
|
|---|
| 1017 | # 0x09 (EFI_LIGHTBLUE)<BR>
|
|---|
| 1018 | # 0x0A (EFI_LIGHTGREEN)<BR>
|
|---|
| 1019 | # 0x0B (EFI_LIGHTCYAN)<BR>
|
|---|
| 1020 | # 0x0C (EFI_LIGHTRED)<BR>
|
|---|
| 1021 | # 0x0D (EFI_LIGHTMAGENTA)<BR>
|
|---|
| 1022 | # 0x0E (EFI_YELLOW)<BR>
|
|---|
| 1023 | # 0x0F (EFI_WHITE)<BR>
|
|---|
| 1024 | # @Prompt Foreground color for browser subtile.
|
|---|
| 1025 | # @ValidRange 0x80000004 | 0x00 - 0x0F
|
|---|
| 1026 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
|
|---|
| 1027 |
|
|---|
| 1028 | ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
|
|---|
| 1029 | # Only following values defined in UEFI specification are valid:<BR><BR>
|
|---|
| 1030 | # 0x00 (EFI_BLACK)<BR>
|
|---|
| 1031 | # 0x01 (EFI_BLUE)<BR>
|
|---|
| 1032 | # 0x02 (EFI_GREEN)<BR>
|
|---|
| 1033 | # 0x03 (EFI_CYAN)<BR>
|
|---|
| 1034 | # 0x04 (EFI_RED)<BR>
|
|---|
| 1035 | # 0x05 (EFI_MAGENTA)<BR>
|
|---|
| 1036 | # 0x06 (EFI_BROWN)<BR>
|
|---|
| 1037 | # 0x07 (EFI_LIGHTGRAY)<BR>
|
|---|
| 1038 | # 0x08 (EFI_DARKGRAY)<BR>
|
|---|
| 1039 | # 0x09 (EFI_LIGHTBLUE)<BR>
|
|---|
| 1040 | # 0x0A (EFI_LIGHTGREEN)<BR>
|
|---|
| 1041 | # 0x0B (EFI_LIGHTCYAN)<BR>
|
|---|
| 1042 | # 0x0C (EFI_LIGHTRED)<BR>
|
|---|
| 1043 | # 0x0D (EFI_LIGHTMAGENTA)<BR>
|
|---|
| 1044 | # 0x0E (EFI_YELLOW)<BR>
|
|---|
| 1045 | # 0x0F (EFI_WHITE)<BR>
|
|---|
| 1046 | # @Prompt Foreground color for browser field.
|
|---|
| 1047 | # @ValidRange 0x80000004 | 0x00 - 0x0F
|
|---|
| 1048 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
|
|---|
| 1049 |
|
|---|
| 1050 | ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
|
|---|
| 1051 | # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
|
|---|
| 1052 | # 0x00 (EFI_BLACK)<BR>
|
|---|
| 1053 | # 0x01 (EFI_BLUE)<BR>
|
|---|
| 1054 | # 0x02 (EFI_GREEN)<BR>
|
|---|
| 1055 | # 0x03 (EFI_CYAN)<BR>
|
|---|
| 1056 | # 0x04 (EFI_RED)<BR>
|
|---|
| 1057 | # 0x05 (EFI_MAGENTA)<BR>
|
|---|
| 1058 | # 0x06 (EFI_BROWN)<BR>
|
|---|
| 1059 | # 0x07 (EFI_LIGHTGRAY)<BR>
|
|---|
| 1060 | # 0x08 (EFI_DARKGRAY)<BR>
|
|---|
| 1061 | # 0x09 (EFI_LIGHTBLUE)<BR>
|
|---|
| 1062 | # 0x0A (EFI_LIGHTGREEN)<BR>
|
|---|
| 1063 | # 0x0B (EFI_LIGHTCYAN)<BR>
|
|---|
| 1064 | # 0x0C (EFI_LIGHTRED)<BR>
|
|---|
| 1065 | # 0x0D (EFI_LIGHTMAGENTA)<BR>
|
|---|
| 1066 | # 0x0E (EFI_YELLOW)<BR>
|
|---|
| 1067 | # 0x0F (EFI_WHITE)<BR>
|
|---|
| 1068 | # @Prompt Foreground color for highlighted browser field.
|
|---|
| 1069 | # @ValidRange 0x80000004 | 0x00 - 0x0F
|
|---|
| 1070 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
|
|---|
| 1071 |
|
|---|
| 1072 | ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
|
|---|
| 1073 | # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
|
|---|
| 1074 | # 0x00 (EFI_BACKGROUND_BLACK)<BR>
|
|---|
| 1075 | # 0x10 (EFI_BACKGROUND_BLUE)<BR>
|
|---|
| 1076 | # 0x20 (EFI_BACKGROUND_GREEN)<BR>
|
|---|
| 1077 | # 0x30 (EFI_BACKGROUND_CYAN)<BR>
|
|---|
| 1078 | # 0x40 (EFI_BACKGROUND_RED)<BR>
|
|---|
| 1079 | # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>
|
|---|
| 1080 | # 0x60 (EFI_BACKGROUND_BROWN)<BR>
|
|---|
| 1081 | # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
|
|---|
| 1082 | # @Prompt Background color for highlighted browser field.
|
|---|
| 1083 | # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
|
|---|
| 1084 | gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
|
|---|
| 1085 |
|
|---|
| 1086 | ## Time in second to delay for SATA devices to spin-up for recovery.
|
|---|
| 1087 | # @Prompt SATA spin-up delay time in second for recovery path.
|
|---|
| 1088 | gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
|
|---|
| 1089 |
|
|---|
| 1090 | ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold
|
|---|
| 1091 | # runtime created S3 boot script entries. The default page number is 2. When changing the value of this
|
|---|
| 1092 | # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot
|
|---|
| 1093 | # script node created in runtime phase.
|
|---|
| 1094 | # @Prompt Reserved page number for S3 Boot Script Runtime Table.
|
|---|
| 1095 | gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
|
|---|
| 1096 |
|
|---|
| 1097 | ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
|
|---|
| 1098 | # The default size is 32K. When changing the value of this PCD, the platform developer should
|
|---|
| 1099 | # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
|
|---|
| 1100 | # @Prompt Stack size for CapsulePei transfer to long mode.
|
|---|
| 1101 | gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
|
|---|
| 1102 |
|
|---|
| 1103 | ## Indicates if 1G page table will be enabled.<BR><BR>
|
|---|
| 1104 | # TRUE - 1G page table will be enabled.<BR>
|
|---|
| 1105 | # FALSE - 1G page table will not be enabled.<BR>
|
|---|
| 1106 | # @Prompt Enable 1G page table support.
|
|---|
| 1107 | gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
|
|---|
| 1108 |
|
|---|
| 1109 | ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
|
|---|
| 1110 | # TRUE - Single Root I/O virtualization is supported.<BR>
|
|---|
| 1111 | # FALSE - Single Root I/O virtualization is not supported.<BR>
|
|---|
| 1112 | # @Prompt Enable SRIOV support.
|
|---|
| 1113 | gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
|
|---|
| 1114 |
|
|---|
| 1115 | ## Indicates if the Alternative Routing-ID is supported.<BR><BR>
|
|---|
| 1116 | # TRUE - Alternative Routing-ID is supported.<BR>
|
|---|
| 1117 | # FALSE - Alternative Routing-ID is not supported.<BR>
|
|---|
| 1118 | # @Prompt Enable ARI support.
|
|---|
| 1119 | gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
|
|---|
| 1120 |
|
|---|
| 1121 | ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
|
|---|
| 1122 | # TRUE - Multi Root I/O virtualization is supported.<BR>
|
|---|
| 1123 | # FALSE - Multi Root I/O virtualization is not supported.<BR>
|
|---|
| 1124 | # @Prompt Enable MRIOV support.
|
|---|
| 1125 | gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
|
|---|
| 1126 |
|
|---|
| 1127 | ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
|
|---|
| 1128 | # BITN set indicates 2 of n+12 power<BR>
|
|---|
| 1129 | # BIT0 set indicates 4KB alignment<BR>
|
|---|
| 1130 | # BIT1 set indicates 8KB alignment<BR>
|
|---|
| 1131 | # @Prompt SRIOV system page size.
|
|---|
| 1132 | gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
|
|---|
| 1133 |
|
|---|
| 1134 | ## SMBIOS version.
|
|---|
| 1135 | # @Prompt SMBIOS version.
|
|---|
| 1136 | gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055
|
|---|
| 1137 |
|
|---|
| 1138 | ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
|
|---|
| 1139 | # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
|
|---|
| 1140 | # @Prompt Pad size for extension FPDT boot records.
|
|---|
| 1141 | gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
|
|---|
| 1142 |
|
|---|
| 1143 | ## Indicates if ConIn device are connected on demand.<BR><BR>
|
|---|
| 1144 | # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
|
|---|
| 1145 | # by Consplitter should be called before any real key read operation.<BR>
|
|---|
| 1146 | # FALSE - ConIn device may be connected normally during BDS.<BR>
|
|---|
| 1147 | # @Prompt ConIn connect on demand.
|
|---|
| 1148 | gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
|
|---|
| 1149 |
|
|---|
| 1150 | ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
|
|---|
| 1151 | # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
|
|---|
| 1152 | # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
|
|---|
| 1153 | # @Prompt Enable ATA S.M.A.R.T feature.
|
|---|
| 1154 | gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
|
|---|
| 1155 |
|
|---|
| 1156 | ## Indicates if full PCI enumeration is disabled.<BR><BR>
|
|---|
| 1157 | # TRUE - Full PCI enumeration is disabled.<BR>
|
|---|
| 1158 | # FALSE - Full PCI enumeration is not disabled.<BR>
|
|---|
| 1159 | # @Prompt Disable full PCI enumeration.
|
|---|
| 1160 | gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
|
|---|
| 1161 |
|
|---|
| 1162 | ## Disk I/O - Number of Data Buffer block.
|
|---|
| 1163 | # Define the size in block of the pre-allocated buffer. It provide better
|
|---|
| 1164 | # performance for large Disk I/O requests.
|
|---|
| 1165 | # @Prompt Disk I/O - Number of Data Buffer block.
|
|---|
| 1166 | gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
|
|---|
| 1167 |
|
|---|
| 1168 | ## This PCD specifies the PCI-based UFS host controller mmio base address.
|
|---|
| 1169 | # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
|
|---|
| 1170 | # host controllers, their mmio base addresses are calculated one by one from this base address.
|
|---|
| 1171 | # @Prompt Mmio base address of pci-based UFS host controller.
|
|---|
| 1172 | gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
|
|---|
| 1173 |
|
|---|
| 1174 | [PcdsPatchableInModule]
|
|---|
| 1175 | ## Specify memory size with page number for PEI code when
|
|---|
| 1176 | # Loading Module at Fixed Address feature is enabled.
|
|---|
| 1177 | # The value will be set by the build tool.
|
|---|
| 1178 | # @Prompt LMFA PEI code page number.
|
|---|
| 1179 | # @ValidList 0x80000001 | 0
|
|---|
| 1180 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
|
|---|
| 1181 |
|
|---|
| 1182 | ## Specify memory size with page number for DXE boot time code when
|
|---|
| 1183 | # Loading Module at Fixed Address feature is enabled.
|
|---|
| 1184 | # The value will be set by the build tool.
|
|---|
| 1185 | # @Prompt LMFA DXE boot code page number.
|
|---|
| 1186 | # @ValidList 0x80000001 | 0
|
|---|
| 1187 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
|
|---|
| 1188 |
|
|---|
| 1189 | ## Specify memory size with page number for DXE runtime code when
|
|---|
| 1190 | # Loading Module at Fixed Address feature is enabled.
|
|---|
| 1191 | # The value will be set by the build tool.
|
|---|
| 1192 | # @Prompt LMFA DXE runtime code page number.
|
|---|
| 1193 | # @ValidList 0x80000001 | 0
|
|---|
| 1194 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
|
|---|
| 1195 |
|
|---|
| 1196 | ## Specify memory size with page number for SMM code when
|
|---|
| 1197 | # Loading Module at Fixed Address feature is enabled.
|
|---|
| 1198 | # The value will be set by the build tool.
|
|---|
| 1199 | # @Prompt LMFA SMM code page number.
|
|---|
| 1200 | # @ValidList 0x80000001 | 0
|
|---|
| 1201 | gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
|
|---|
| 1202 |
|
|---|
| 1203 | [PcdsDynamic, PcdsDynamicEx]
|
|---|
| 1204 | ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
|
|---|
| 1205 | # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
|
|---|
| 1206 | # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
|
|---|
| 1207 | # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
|
|---|
| 1208 | # @Prompt S3 Boot Script Table Private Data pointer.
|
|---|
| 1209 | # @ValidList 0x80000001 | 0x0
|
|---|
| 1210 | gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
|
|---|
| 1211 |
|
|---|
| 1212 | ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
|
|---|
| 1213 | # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
|
|---|
| 1214 | # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
|
|---|
| 1215 | # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
|
|---|
| 1216 | # @Prompt S3 Boot Script Table Private Smm Data pointer.
|
|---|
| 1217 | # @ValidList 0x80000001 | 0x0
|
|---|
| 1218 | gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
|
|---|
| 1219 |
|
|---|
| 1220 | ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
|
|---|
| 1221 | # Virtual to Physical mapping according to the processor physical address bits.
|
|---|
| 1222 | # @Prompt Identify Mapping Page Table pointer.
|
|---|
| 1223 | # @ValidList 0x80000001 | 0x0
|
|---|
| 1224 | gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
|
|---|
| 1225 |
|
|---|
| 1226 | [UserExtensions.TianoCore."ExtraFiles"]
|
|---|
| 1227 | MdeModulePkgExtra.uni
|
|---|
