MdeModulePkg.dec@ 48674

最後變更在這個檔案從48674是 48674,由 vboxsync 提交於 11 年前
EFI: Export newly imported tinaocore UEFI sources to OSE.
檔案大小: 44.8 KB

行
1	## @file MdeModulePkg.dec
2	#
3	# This package provides the modules that conform to UEFI/PI Industry standards.
4	# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
5	# and libraries instances, which are used for those modules.
6	#
7	# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
8	# This program and the accompanying materials are licensed and made available under
9	# the terms and conditions of the BSD License that accompanies this distribution.
10	# The full text of the license may be found at
11	# http://opensource.org/licenses/bsd-license.php.
12	#
13	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
14	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
15	#
16	##
17
18
19	[Defines]
20	DEC_SPECIFICATION = 0x00010005
21	PACKAGE_NAME = MdeModulePkg
22	PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
23	PACKAGE_VERSION = 0.92
24
25	[Includes]
26	Include
27
28
29	[LibraryClasses]
30	## @libraryclass IpIo layer upon EFI IP4 Protocol.
31	# This library is only intended to be used by UEFI network stack modules.
32	IpIoLib\|Include/Library/IpIoLib.h
33
34	## @libraryclass Basic function for UEFI network stack.
35	# This library is only intended to be used by UEFI network stack modules.
36	NetLib\|Include/Library/NetLib.h
37
38	## @libraryclass The helper routines to access UDP service.
39	# This library is only intended to be used by UEFI network stack modules.
40	UdpIoLib\|Include/Library/UdpIoLib.h
41
42	## @libraryclass The helper routines to access TCP service.
43	# This library is only intended to be used by UEFI network stack modules.
44	TcpIoLib\|Include/Library/TcpIoLib.h
45
46	## @libraryclass Defines a set of methods to reset whole system.
47	ResetSystemLib\|Include/Library/ResetSystemLib.h
48
49	## @libraryclass Defines a set of methods related do S3 mode.
50	# This library class is no longer used and modules using this library should
51	# directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
52	S3Lib\|Include/Library/S3Lib.h
53
54	## @libraryclass Defines a set of methods related recovery mode.
55	# This library class is no longer used and modules using this library should
56	# directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
57	RecoveryLib\|Include/Library/RecoveryLib.h
58
59	## @libraryclass Provides HII related functions.
60	HiiLib\|Include/Library/HiiLib.h
61
62	## @libraryclass Defines a set of interfaces on how to process capusle image update.
63	CapsuleLib\|Include/Library/CapsuleLib.h
64
65	## @libraryclass Library for Deferred Procedure Calls.
66	DpcLib\|Include/Library/DpcLib.h
67
68	## @libraryclass Provides global variables that are pointers
69	# to the UEFI HII related protocols.
70	#
71	UefiHiiServicesLib\|Include/Library/UefiHiiServicesLib.h
72
73	## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
74	#
75	SecurityManagementLib\|Include/Library/SecurityManagementLib.h
76
77	## @libraryclass OEM status code libary is used to report status code to OEM device.
78	#
79	OemHookStatusCodeLib\|Include/Library/OemHookStatusCodeLib.h
80
81	## @libraryclass Debug Agent is used to provide soft debug capability.
82	#
83	DebugAgentLib\|Include/Library/DebugAgentLib.h
84
85	## @libraryclass Provide platform specific hooks.
86	#
87	PlatformHookLib\|Include/Library/PlatformHookLib.h
88
89	## @libraryclass Provide platform specific hooks for SMM core.
90	#
91	SmmCorePlatformHookLib\|Include/Library/SmmCorePlatformHookLib.h
92
93	## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
94	#
95	LockBoxLib\|Include/Library/LockBoxLib.h
96
97	[Guids]
98	## MdeModule package token space guid
99	# Include/Guid/MdeModulePkgTokenSpace.h
100	gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
101
102	## Hob guid for Pcd DataBase
103	# Include/Guid/PcdDataBaseHobGuid.h
104	gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
105
106	## Guid for EDKII implementation GUIDed opcodes
107	# Include/Guid/MdeModuleHii.h
108	gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
109
110	## Guid for Framework vfr GUIDed opcodes.
111	# Include/Guid/MdeModuleHii.h
112	gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
113
114	## Guid to specify the System Non Volatile FV
115	# Include/Guid/SystemNvDataGuid.h
116	gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
117
118	## Guid specify the device is the console out device.
119	# Include/Guid/ConsoleOutDevice.h
120	gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
121
122	## Guid specify the device is the console in device.
123	# Include/Guid/ConsoleInDevice.h
124	gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
125
126	## Hob and Variable guid specify the platform memory type information.
127	# Include/Guid/MemoryTypeInformation.h
128	gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
129
130	## Capsule update hob and variable guid
131	# Include/Guid/CapsuleVendor.h
132	gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
133
134	## Guid specifiy the device is the StdErr device.
135	# Include/Guid/StandardErrorDevice.h
136	gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
137
138	## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
139	# Include/Guid/VariableFormat.h
140	gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
141
142	# Include/Guid/VariableIndexTable.h
143	gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
144
145	## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
146	# Include/Guid/SmmVariableCommon.h
147	gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
148
149	## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
150	# Include/Guid/Performance.h
151	gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
152	gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
153	gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
154	gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
155
156	## Guid is defined for CRC32 encapsulation scheme.
157	# Include/Guid/Crc32GuidedSectionExtraction.h
158	gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
159
160	## Include/Guid/NicIp4ConfigNvData.h
161	gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
162
163	## Include/Guid/StatusCodeCallbackGuid.h
164	gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
165
166	## GUID identifies status code records HOB that originate from the PEI status code
167	# Include/Guid/MemoryStatusCodeRecord.h
168	gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
169
170	## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
171	# Include/Guid/StatusCodeDataTypeDebug.h
172	gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
173
174	## A configuration Table Guid for Load module at fixed address
175	# Include/Guid/LoadModuleAtFixedAddress.h
176	gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
177
178	## GUID used to store the global debug mask value into an EFI Variable
179	# Include/Guid/DebugMask.h
180	gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
181
182	## Event for the DXE Core to signal idle events
183	# Include/Guid/EventIdle.h
184	gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
185
186	## Include/Guid/RecoveryDevice.h
187	gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
188
189	## Include/Guid/RecoveryDevice.h
190	gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
191
192	## Include/Guid/RecoveryDevice.h
193	gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
194
195	## Include/Guid/RecoveryDevice.h
196	gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
197
198	## Include/Guid/SmmLockBox.h
199	gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
200
201	## Include/Guid/AcpiS3Context.h
202	gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
203
204	## Include/Guid/AcpiS3Context.h
205	gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
206
207	## Include/Guid/BootScriptExecutorVariable.h
208	gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
209	gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
210
211	## Include/Guid/UsbKeyBoardLayout.h
212	gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
213	gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
214
215	## Include/Guid/HiiResourceSampleHii.h
216	gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
217
218	## Include/Guid/DriverSampleHii.h
219	gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
220	gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
221	gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
222
223	## Include/Guid/PlatDriOverrideHii.h
224	gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
225
226	## Include/Guid/Ip4ConfigHii.h
227	gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}
228
229	## Include/Guid/VlanConfigHii.h
230	gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
231
232	## Include/Guid/Ip4IScsiConfigHii.h
233	gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
234	gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
235
236	## Include/Guid/ZeroGuid.h
237	gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
238
239	## Include/Guid/MtcVendor.h
240	gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
241
242	## Guid for Firmware Performance Data Table (FPDT) implementation.
243	# Include/Guid/FirmwarePerformance.h
244	gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
245
246	[Ppis]
247	## Include/Ppi/AtaController.h
248	gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
249
250	## Include/Ppi/UsbHostController.h
251	gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
252
253	## Include/Ppi/Usb2HostController.h
254	gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
255
256	## Include/Ppi/UsbController.h
257	gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
258
259	## Include/Ppi/UsbIo.h
260	gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
261
262	## Include/Ppi/Capsule.h
263	gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}
264
265	## Include/Ppi/SecPerformance.h
266	gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
267
268	## Include/Ppi/SmmCommunication.h
269	gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
270
271	## Include/Ppi/SmmAccess.h
272	gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
273
274	## Include/Ppi/SmmControl.h
275	gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
276
277	## Include/Ppi/PostBootScriptTable.h
278	gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
279
280	[Protocols]
281	## Load File protocol provides capability to load and unload EFI image into memory and execute it.
282	# Include/Protocol/LoadPe32Image.h
283	# This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
284	# If developer need implement such functionality, they should use BasePeCoffLib.
285	gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
286
287	## Print protocol defines basic print functions to print the format unicode and ascii string.
288	# Include/Protocol/Print2.h
289	gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
290
291	## This protocol defines the generic memory test interfaces in Dxe phase.
292	# Include/Protocol/GenericMemoryTest.h
293	gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
294
295	## Include/Protocol/Dpc.h
296	gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
297
298	## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
299	# Include/Protocol/FaultTolerantWrite.h
300	gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
301
302	## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
303	# Include/Protocol/SmmFaultTolerantWrite.h
304	gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
305
306	## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
307	# Include/Protocol/SwapAddressRange.h
308	gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
309
310	## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
311	# Include/Protocol/SmmSwapAddressRange.h
312	gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
313
314	## This protocol is intended for use as a means to store data in the EFI SMM environment.
315	# Include/Protocol/SmmVariableProtocol.h
316	gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
317
318	## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
319	# Include/Protocol/SmmFirmwareVolumeBlock.h
320	gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
321
322	## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
323	# Include/Guid/DebugMask.h
324	gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
325
326	## Include/Protocol/LockBox.h
327	gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
328
329	## Include/Protocol/FormBrowserEx.h
330	gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
331
332	## Include/Protocol/EbcVmTest.h
333	gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
334
335	## Include/Protocol/EbcSimpleDebugger.h
336	gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
337
338	## Include/Protocol/BootLogo.h
339	gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
340
341	[PcdsFeatureFlag]
342	## Indicate whether platform can support update capsule across a system reset
343	gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset\|FALSE\|BOOLEAN\|0x0001001d
344
345	## This feature flag can be used to enable or disable all PCD PEIM services.
346	# If TRUE, all PCD PPI services will be produced.
347	# If FALSE, the minimal PCD PEIM services (only GetService) will be produced.
348	gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable\|TRUE\|BOOLEAN\|0x00010020
349
350	## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
351	# It can be disabled to save size.
352	gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText\|TRUE\|BOOLEAN\|0x00010037
353
354	## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
355	# It can be disabled to save size.
356	gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText\|TRUE\|BOOLEAN\|0x00010038
357
358	## If TRUE, enable the statistic functionality about variable usage. Such information is
359	# stored as a vendor configuration table into the EFI system table.
360	# If user wants to use VariableInfo application in MdeModulePkg\Application directory to get
361	# variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can
362	# not output useful info.
363	gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics\|FALSE\|BOOLEAN\|0x0001003f
364
365	## If TRUE, Unicode Collation Protocol will be installed.
366	gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport\|TRUE\|BOOLEAN\|0x00010040
367
368	## If TRUE, Unicode Collation 2 Protocol will be installed.
369	gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support\|TRUE\|BOOLEAN\|0x00010041
370
371	## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
372	# It could be set FALSE to save size.
373	gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport\|TRUE\|BOOLEAN\|0x00010042
374
375	## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
376	# It could be set FALSE to save size.
377	gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport\|TRUE\|BOOLEAN\|0x00010043
378
379	## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.
380	# If TE section is not found, then PeiCore will search PE section.
381	# If FALSE, PeiCore will first search PE section from PEIM to load the image.
382	# This PCD is used to tune Pei phase performance to reduce the search image time.
383	# It can be set according to the generated image section type.
384	gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst\|TRUE\|BOOLEAN\|0x00010044
385
386	## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI
387	# interrupt to access usb device in the case of absence of usb stack.
388	# DUET platform requires the token to be TRUE.
389	gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport\|FALSE\|BOOLEAN\|0x00010047
390
391	## If TRUE, HiiImageProtocol will be installed.
392	# FALSE is for size reduction.
393	gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol\|TRUE\|BOOLEAN\|0x00010100
394
395	## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
396	# The default keyboard layout serves as the backup when no keyboard layout can be retrieved
397	# from HII database.
398	gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver\|FALSE\|BOOLEAN\|0x00010200
399
400	## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
401	# If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
402	# This is used to provide backward compatibility support to Framework HII and Framework FvHob.
403	gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport\|FALSE\|BOOLEAN\|0x00012009
404
405	## If TRUE, HelloWorld Application will print the verbose information.
406	# This PCD is a sample to explain FeatureFlag PCD usage.
407	gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable\|TRUE\|BOOLEAN\|0x0001200a
408
409	## If TRUE, FULL FTW protocol services (total six APIs) will be produced.
410	# If FASLE, only FTW Write service is available.
411	gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable\|TRUE\|BOOLEAN\|0x0001200b
412
413	## If TRUE, DXE IPL must support the UEFI decompression algorithm.
414	# If FALSE, DXE IPL will not support UEFI decompression to save space.
415	gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress\|TRUE\|BOOLEAN\|0x0001200c
416
417	## This PCD specifies whether PciBus supports the hot plug device.
418	gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport\|TRUE\|BOOLEAN\|0x0001003d
419
420	## This PCD specifies whether the PCI bus driver probes non-standard,
421	# such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.
422	gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe\|FALSE\|BOOLEAN\|0x0001004e
423	## This PCD specifies whether StatusCode is reported via Serial port.
424	gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial\|TRUE\|BOOLEAN\|0x00010022
425
426	## This PCD specifies whether StatusCode is stored in memory.
427	# The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.
428	gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory\|FALSE\|BOOLEAN\|0x00010023
429
430	## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.
431	gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn\|FALSE\|BOOLEAN\|0x0001002d
432
433	## This PCD specified whether ACPI SDT protocol is installed.
434	gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol\|FALSE\|BOOLEAN\|0x0001004d
435
436	## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
437	# If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.
438	# The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.
439	gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable\|FALSE\|BOOLEAN\|0x0001003e
440
441	## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.
442	# If TRUE, TEXT statement will always be set to GrayOut.
443	# If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.
444	gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement\|FALSE\|BOOLEAN\|0x0001004f
445
446	## If TRUE, recovery from IDE disk will be supported.
447	gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk\|TRUE\|BOOLEAN\|0x00010060
448
449	## If TRUE, recovery from FAT floppy disk will be supported.
450	gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk\|TRUE\|BOOLEAN\|0x00010061
451
452	## If TRUE, recovery from data CD will be supported.
453	gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD\|TRUE\|BOOLEAN\|0x00010062
454
455	## If TRUE, recovery from FAT USB disk will be supported.
456	gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk\|TRUE\|BOOLEAN\|0x00010063
457
458	## If TRUE, S3 performance data will be supported in ACPI FPDT table.
459	gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support\|TRUE\|BOOLEAN\|0x00010064
460
461	[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
462	##
463	# This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
464	# If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;
465	# otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
466	# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
467	# is built in firmware.
468	#
469	gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode\|TRUE\|BOOLEAN\|0x0001003b
470
471	##
472	# This feature flag specifies whether DxeIpl should rebuild page tables. This flag only
473	# makes sense in the case where the DxeIpl and the DxeCore are both X64.
474	#
475	gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables\|TRUE\|BOOLEAN\|0x0001003c
476
477	[PcdsFixedAtBuild]
478	## Dynamic type PCD can be registered callback function for Pcd setting action.
479	# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
480	# for a dynamic PCD used in PEI phase.
481	gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry\|0x08\|UINT32\|0x0001000f
482
483	## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
484	# to store PCD value.
485	#
486	gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress\|0x0\|UINT32\|0x00010010
487
488	## Maximum number of FV is supported by PeiCore's dispatching.
489	gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported\|6\|UINT32\|0x00010030
490
491	## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
492	gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv\|32\|UINT32\|0x00010031
493
494	## Maximum stack size for PeiCore.
495	gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize\|0x20000\|UINT32\|0x00010032
496
497	## Maximum PPI count is supported by PeiCore's PPI database.
498	gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported\|64\|UINT32\|0x00010033
499
500	## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize
501	# The root cause is that variable driver will use FTW protocol to reclaim variable region.
502	# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
503	# be reflushed through the manner of fault tolerant write.
504	gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize\|0x0\|UINT32\|0x30000002
505
506	## The maximum size of single common variable, that is non-HwErr type varible.
507	gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize\|0x400\|UINT32\|0x30000003
508
509	## The maximum size of single hardware error record variable.
510	# In IA32/X64 platforms, this value should be larger than 1KB.
511	# In IA64 platforms, this value should be larger than 128KB.
512	gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize\|0x8000\|UINT32\|0x30000004
513
514	## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize
515	# In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
516	# so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.
517	# this value is used to guarantee the space of HwErr type variable and not populated by common variable.
518	gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize\|0x0000\|UINT32\|0x30000006
519
520	## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.
521	gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize\|0x10000\|UINT32\|0x30000005
522
523	## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize
524	# The root cause is that variable driver will use FTW protocol to reclaim variable region.
525	# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
526	# be reflushed through the manner of fault tolerant write.
527	gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize\|0x0\|UINT32\|0x30000014
528
529	## Size of the FTW working block range.
530	gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize\|0x0\|UINT32\|0x30000011
531
532	## FFS filename to find the ACPI tables
533	gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile\|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }\|VOID*\|0x30000016
534
535	## FFS filename to find the capsule coalesce image.
536	gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile\|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }\|VOID*\|0x30000017
537
538	## Single root I/O virtualization virtual function memory BAR alignment
539	# BITN set indicates 2 of n+12 power
540	# BIT0 set indicates 4KB alignment
541	# BIT1 set indicates 8KB alignment
542	gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize\|0x1\|UINT32\|0x10000047
543
544	## Flag of enabling/disabling the feature of Loading Module at Fixed Address
545	# -1: Enable the feature as fixed offset to TOLM
546	# 0: Disable the feature.
547	# Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address
548	gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable\|0\|UINT64\|0x30001015
549
550	## Smbios version
551	gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion\|0x0207\|UINT16\|0x00010055
552
553	## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)
554	# to handle all link layers. If the value is non zero, the PCD value will be used as block size.
555	#
556	gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize\|0x0\|UINT64\|0x30001026
557
558	## Progress Code for OS Loader LoadImage start.
559	# PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER \| (EFI_OEM_SPECIFIC \| 0x00000000)) = 0x03058000
560	gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad\|0x03058000\|UINT32\|0x30001030
561
562	## Progress Code for OS Loader StartImage start.
563	# PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER \| (EFI_OEM_SPECIFIC \| 0x00000001)) = 0x03058001
564	gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart\|0x03058001\|UINT32\|0x30001031
565
566	## Progress Code for S3 Suspend start.
567	# PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER \| (EFI_OEM_SPECIFIC \| 0x00000000)) = 0x03078000
568	gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart\|0x03078000\|UINT32\|0x30001032
569
570	## Progress Code for S3 Suspend end.
571	# PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER \| (EFI_OEM_SPECIFIC \| 0x00000001)) = 0x03078001
572	gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd\|0x03078001\|UINT32\|0x30001033
573
574	[PcdsFixedAtBuild,PcdsPatchableInModule]
575	## Maximun number of performance log entries during PEI phase.
576	gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries\|40\|UINT8\|0x0001002f
577
578	## RTC Update Timeout Value
579	gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout\|100000\|UINT32\|0x00010034
580
581	## If TRUE, then 16550 serial port registers are in MMIO space.
582	# If FALSE, then 16550 serial port registers are in I/O space. Default value.
583	gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio\|FALSE\|BOOLEAN\|0x00020000
584
585	## If TRUE, then the 16550 serial port hardware flow control is enabled.
586	# If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.
587	gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl\|FALSE\|BOOLEAN\|0x00020001
588
589	## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).
590	# If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.
591	# This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.
592	gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable\|FALSE\|BOOLEAN\|0x00020006
593
594	## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
595	gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase\|0x03F8\|UINT64\|0x00020002
596
597	## Baud rate for the 16550 serial port. Default is 115200 baud.
598	gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate\|115200\|UINT32\|0x00020003
599
600	## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.
601	# BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits
602	# BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.
603	# BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity
604	# BIT7..BIT6 - Reserved. Must be 0.
605	#
606	# Default is No Parity, 8 Data Bits, 1 Stop Bit.
607	#
608	gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl\|0x03\|UINT8\|0x00020004
609
610	## FIFO Control Register (FCR) for the 16550 serial port.
611	# BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.
612	# BIT1 - Clear receive FIFO. 1 = Clear FIFO.
613	# BIT2 - Clear transmit FIFO. 1 = Clear FIFO.
614	# BIT4..BIT3 - Reserved. Must be 0.
615	# BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO
616	# BIT7..BIT6 - Reserved. Must be 0.
617	#
618	# Default is to enable and clear all FIFOs.
619	#
620	gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl\|0x07\|UINT8\|0x00020005
621
622	## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
623	# structure. The default value for this PCD is 0, which means that the DXE Core
624	# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
625	# boundary as close to the top of memory as feasible. If this PCD is set to a
626	# value other than 0, then the DXE Core will first attempt to allocate the
627	# EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
628	# by this PCD, and if that allocation fails, retry the allocation on a 4MB
629	# boundary as close to the top of memory as feasible.
630	#
631	gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress\|0x0\|UINT64\|0x30001027
632
633	[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
634	## This PCD defines the Console output column and the default value is 25 according to UEFI spec.
635	# This PCD could be set to 0 then console output could be at max column and max row.
636	gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow\|25\|UINT32\|0x40000006
637
638	## This PCD defines the Console output row and the default value is 80 according to UEFI spec.
639	# This PCD could be set to 0 then console output could be at max column and max row.
640	gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn\|80\|UINT32\|0x40000007
641
642	## This PCD defines the video horizontal resolution.
643	# This PCD could be set to 0 then video resolution could be at highest resolution.
644	gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution\|800\|UINT32\|0x40000009
645
646	## This PCD defines the video vertical resolution.
647	# This PCD could be set to 0 then video resolution could be at highest resolution.
648	gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution\|600\|UINT32\|0x4000000a
649
650	[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]
651	## Base address of the NV variable range in flash device
652	gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase\|0x0\|UINT32\|0x30000001
653
654	## Base address of the FTW spare block range in flash device.
655	gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase\|0x0\|UINT32\|0x30000013
656
657	## Base address of the FTW working block range in flash device.
658	gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase\|0x0\|UINT32\|0x30000010
659
660	## 64-bit Base address of the NV variable range in flash device
661	gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64\|0x0\|UINT64\|0x80000001
662
663	## 64-bit Base address of the FTW spare block range in flash device.
664	gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64\|0x0\|UINT64\|0x80000013
665
666	## 64-bit Base address of the FTW working block range in flash device.
667	gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64\|0x0\|UINT64\|0x80000010
668
669	## This PCD defines the print string.
670	# This PCD is a sample to explain String typed PCD usage.
671	gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString\|L"UEFI Hello World!\n"\|VOID*\|0x40000004
672
673	## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store
674	# The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
675	gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved\|0\|UINT64\|0x40000008
676
677	## This PCD specifies whether the Single Root I/O virtualization support.
678	gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport\|TRUE\|BOOLEAN\|0x10000044
679
680	## This PCD specifies whether the Alternative Routing-ID support.
681	gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport\|TRUE\|BOOLEAN\|0x10000045
682
683	## This PCD specifies whether the Multi Root I/O virtualization support.
684	gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport\|FALSE\|BOOLEAN\|0x10000046
685
686	[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
687	## This PCD defines the times to print hello world string.
688	# This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
689	gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes\|1\|UINT32\|0x40000005
690
691	## Indicate the max size of the capsule image with reset flag that the platform can support.
692	# The default max size is 100MB (0x6400000) for more than one large capsule images.
693	gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule\|0x6400000\|UINT32\|0x0001001e
694
695	## Indicate the max size of the capsule image without reset flag that the platform can support.
696	# The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
697	gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule\|0xa00000\|UINT32\|0x0001001f
698
699	## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table
700	gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor\|L"EDK II"\|VOID*\|0x00010050
701
702	## Firmware revision that is default value filled into the EFI System Table
703	gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision\|0x00010000\|UINT32\|0x00010051
704
705	## Null-terminated Unicode string that described the firmware version
706	gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString\|L""\|VOID*\|0x00010052
707
708	## Null-terminated Unicode string that contains the date the formware was released
709	gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString\|L""\|VOID*\|0x00010053
710
711	## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true
712	# (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.
713	# The default value in PeiPhase is 1 KBytes.
714	# The default value in DxePhase is 128 KBytes.
715	gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize\|1\|UINT16\|0x00010054
716
717	## This PCD specifies whether to reset system when memory type information changes.
718	gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange\|TRUE\|BOOLEAN\|0x00010056
719
720	## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
721	# Only following values defined in UEFI specification are valid:
722	# 0x00 (EFI_BLACK)
723	# 0x01 (EFI_BLUE)
724	# 0x02 (EFI_GREEN)
725	# 0x03 (EFI_CYAN)
726	# 0x04 (EFI_RED)
727	# 0x05 (EFI_MAGENTA)
728	# 0x06 (EFI_BROWN)
729	# 0x07 (EFI_LIGHTGRAY)
730	# 0x08 (EFI_DARKGRAY)
731	# 0x09 (EFI_LIGHTBLUE)
732	# 0x0A (EFI_LIGHTGREEN)
733	# 0x0B (EFI_LIGHTCYAN)
734	# 0x0C (EFI_LIGHTRED)
735	# 0x0D (EFI_LIGHTMAGENTA)
736	# 0x0E (EFI_YELLOW)
737	# 0x0F (EFI_WHITE)
738	gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor\|0x01\|UINT8\|0x00010057
739
740	## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
741	# Only following values defined in UEFI specification are valid:
742	# 0x00 (EFI_BLACK)
743	# 0x01 (EFI_BLUE)
744	# 0x02 (EFI_GREEN)
745	# 0x03 (EFI_CYAN)
746	# 0x04 (EFI_RED)
747	# 0x05 (EFI_MAGENTA)
748	# 0x06 (EFI_BROWN)
749	# 0x07 (EFI_LIGHTGRAY)
750	# 0x08 (EFI_DARKGRAY)
751	# 0x09 (EFI_LIGHTBLUE)
752	# 0x0A (EFI_LIGHTGREEN)
753	# 0x0B (EFI_LIGHTCYAN)
754	# 0x0C (EFI_LIGHTRED)
755	# 0x0D (EFI_LIGHTMAGENTA)
756	# 0x0E (EFI_YELLOW)
757	# 0x0F (EFI_WHITE)
758	gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor\|0x00\|UINT8\|0x00010058
759
760	## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
761	# The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:
762	# 0x00 (EFI_BLACK)
763	# 0x01 (EFI_BLUE)
764	# 0x02 (EFI_GREEN)
765	# 0x03 (EFI_CYAN)
766	# 0x04 (EFI_RED)
767	# 0x05 (EFI_MAGENTA)
768	# 0x06 (EFI_BROWN)
769	# 0x07 (EFI_LIGHTGRAY)
770	# 0x08 (EFI_DARKGRAY)
771	# 0x09 (EFI_LIGHTBLUE)
772	# 0x0A (EFI_LIGHTGREEN)
773	# 0x0B (EFI_LIGHTCYAN)
774	# 0x0C (EFI_LIGHTRED)
775	# 0x0D (EFI_LIGHTMAGENTA)
776	# 0x0E (EFI_YELLOW)
777	# 0x0F (EFI_WHITE)
778	gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor\|0x07\|UINT8\|0x00010059
779
780	## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
781	# The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:
782	# 0x00 (EFI_BACKGROUND_BLACK)
783	# 0x10 (EFI_BACKGROUND_BLUE)
784	# 0x20 (EFI_BACKGROUND_GREEN)
785	# 0x30 (EFI_BACKGROUND_CYAN)
786	# 0x40 (EFI_BACKGROUND_RED)
787	# 0x50 (EFI_BACKGROUND_MAGENTA)
788	# 0x60 (EFI_BACKGROUND_BROWN)
789	# 0x70 (EFI_BACKGROUND_LIGHTGRAY)
790	gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor\|0x00\|UINT8\|0x0001005A
791
792	## Time in second to delay for SATA devices to spin-up for recovery.
793	gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath\|15\|UINT16\|0x0001005B
794
795	## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold
796	# runtime created S3 boot script entries. The default page number is 2. When changing the value of this
797	# PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot
798	# script node created in runtime phase.
799	gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber\|0x2\|UINT16\|0x0001005C
800
801	## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
802	# The default size 32K. When changing the value of this PCD, the platform developer should
803	# make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path.
804	gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize\|0x8000\|UINT32\|0x0001005D
805
806	## This PCD specifies whether 1G page table is enabled.
807	gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable\|FALSE\|BOOLEAN\|0x0001005E
808
809	## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
810	# the extension FPDT boot records got after ReadyToBoot and before ExitBootService.
811	gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize\|0x0\|UINT32\|0x0001005F
812
813	[PcdsPatchableInModule]
814	## Specify memory size with page number for PEI code when
815	# the feature of Loading Module at Fixed Address is enabled
816	gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber\|0\|UINT32\|0x00000029
817
818	## Specify memory size with page number for DXE boot time code when
819	# the feature of Loading Module at Fixed Address is enabled
820	gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber\|0\|UINT32\|0x0000002a
821
822	## Specify memory size with page number for DXE runtime code when
823	# the feature of Loading Module at Fixed Address is enabled
824	gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber\|0\|UINT32\|0x0000002b
825
826	## Specify memory size with page number for SMM code when
827	# the feature of Loading Module at Fixed Address is enabled
828	gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber\|0\|UINT32\|0x0000002c
829
830	[PcdsDynamic, PcdsDynamicEx]
831	## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
832	# instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
833	# only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
834	# default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
835	gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr\|0x0\|UINT64\|0x00030000
836

注意: 瀏覽 TracBrowser 來幫助您使用儲存庫瀏覽器

以其他格式下載:

原來格式