source: vbox/trunk/src/VBox/Devices/EFI/Firmware/MdePkg/Include/Protocol/AbsolutePointer.h@ 105681

/** @file
  The file provides services that allow information about an
  absolute pointer device to be retrieved.

  Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent

  @par Revision Reference:
  This Protocol was introduced in UEFI Specification 2.3.

**/

#ifndef __ABSOLUTE_POINTER_H__
#define __ABSOLUTE_POINTER_H__

#define EFI_ABSOLUTE_POINTER_PROTOCOL_GUID \
  { 0x8D59D32B, 0xC655, 0x4AE9, { 0x9B, 0x15, 0xF2, 0x59, 0x04, 0x99, 0x2A, 0x43 } }

typedef struct _EFI_ABSOLUTE_POINTER_PROTOCOL EFI_ABSOLUTE_POINTER_PROTOCOL;

// *******************************************************
// EFI_ABSOLUTE_POINTER_MODE
// *******************************************************

/**
  The following data values in the EFI_ABSOLUTE_POINTER_MODE
  interface are read-only and are changed by using the appropriate
  interface functions.
**/
typedef struct {
  UINT64    AbsoluteMinX; ///< The Absolute Minimum of the device on the x-axis
  UINT64    AbsoluteMinY; ///< The Absolute Minimum of the device on the y axis.
  UINT64    AbsoluteMinZ; ///< The Absolute Minimum of the device on the z-axis
  UINT64    AbsoluteMaxX; ///< The Absolute Maximum of the device on the x-axis. If 0, and the
                          ///< AbsoluteMinX is 0, then the pointer device does not support a xaxis
  UINT64    AbsoluteMaxY; ///< The Absolute Maximum of the device on the y -axis. If 0, and the
                          ///< AbsoluteMinX is 0, then the pointer device does not support a yaxis.
  UINT64    AbsoluteMaxZ; ///< The Absolute Maximum of the device on the z-axis. If 0 , and the
                          ///< AbsoluteMinX is 0, then the pointer device does not support a zaxis
  UINT32    Attributes;   ///< The following bits are set as needed (or'd together) to indicate the
                          ///< capabilities of the device supported. The remaining bits are undefined
                          ///< and should be 0
} EFI_ABSOLUTE_POINTER_MODE;

///
/// If set, indicates this device supports an alternate button input.
///
#define EFI_ABSP_SupportsAltActive  0x00000001

///
/// If set, indicates this device returns pressure data in parameter CurrentZ.
///
#define EFI_ABSP_SupportsPressureAsZ  0x00000002

/**
  This function resets the pointer device hardware. As part of
  initialization process, the firmware/device will make a quick
  but reasonable attempt to verify that the device is
  functioning. If the ExtendedVerification flag is TRUE the
  firmware may take an extended amount of time to verify the
  device is operating on reset. Otherwise the reset operation is
  to occur as quickly as possible. The hardware verification
  process is not defined by this specification and is left up to
  the platform firmware or driver to implement.

  @param This                 A pointer to the EFI_ABSOLUTE_POINTER_PROTOCOL
                              instance.

  @param ExtendedVerification Indicates that the driver may
                              perform a more exhaustive
                              verification operation of the
                              device during reset.

  @retval EFI_SUCCESS       The device was reset.

  @retval EFI_DEVICE_ERROR  The device is not functioning
                            correctly and could not be reset.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_ABSOLUTE_POINTER_RESET)(
  IN EFI_ABSOLUTE_POINTER_PROTOCOL *This,
  IN BOOLEAN                       ExtendedVerification
  );

///
/// This bit is set if the touch sensor is active.
///
#define EFI_ABSP_TouchActive  0x00000001

///
/// This bit is set if the alt sensor, such as pen-side button, is active
///
#define EFI_ABS_AltActive  0x00000002

/**
  Definition of EFI_ABSOLUTE_POINTER_STATE.
**/
typedef struct {
  ///
  /// The unsigned position of the activation on the x axis. If the AboluteMinX
  /// and the AboluteMaxX fields of the EFI_ABSOLUTE_POINTER_MODE structure are
  /// both 0, then this pointer device does not support an x-axis, and this field
  /// must be ignored.
  ///
  UINT64    CurrentX;

  ///
  /// The unsigned position of the activation on the y axis. If the AboluteMinY
  /// and the AboluteMaxY fields of the EFI_ABSOLUTE_POINTER_MODE structure are
  /// both 0, then this pointer device does not support an y-axis, and this field
  /// must be ignored.
  ///
  UINT64    CurrentY;

  ///
  /// The unsigned position of the activation on the z axis, or the pressure
  /// measurement. If the AboluteMinZ and the AboluteMaxZ fields of the
  /// EFI_ABSOLUTE_POINTER_MODE structure are both 0, then this pointer device
  /// does not support an z-axis, and this field must be ignored.
  ///
  UINT64    CurrentZ;

  ///
  /// Bits are set to 1 in this structure item to indicate that device buttons are
  /// active.
  ///
  UINT32    ActiveButtons;
} EFI_ABSOLUTE_POINTER_STATE;

/**
  The GetState() function retrieves the current state of a pointer
  device. This includes information on the active state associated
  with the pointer device and the current position of the axes
  associated with the pointer device. If the state of the pointer
  device has not changed since the last call to GetState(), then
  EFI_NOT_READY is returned. If the state of the pointer device
  has changed since the last call to GetState(), then the state
  information is placed in State, and EFI_SUCCESS is returned. If
  a device error occurs while attempting to retrieve the state
  information, then EFI_DEVICE_ERROR is returned.


  @param This   A pointer to the EFI_ABSOLUTE_POINTER_PROTOCOL
                instance.

  @param State  A pointer to the state information on the
                pointer device.

  @retval EFI_SUCCESS       The state of the pointer device was
                            returned in State.

  @retval EFI_NOT_READY     The state of the pointer device has not
                            changed since the last call to GetState().

  @retval EFI_DEVICE_ERROR  A device error occurred while
                            attempting to retrieve the pointer
                            device's current state.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_ABSOLUTE_POINTER_GET_STATE)(
  IN      EFI_ABSOLUTE_POINTER_PROTOCOL  *This,
  OUT  EFI_ABSOLUTE_POINTER_STATE        *State
  );

///
/// The EFI_ABSOLUTE_POINTER_PROTOCOL provides a set of services
/// for a pointer device that can be used as an input device from an
/// application written to this specification. The services include
/// the ability to: reset the pointer device, retrieve the state of
/// the pointer device, and retrieve the capabilities of the pointer
/// device. The service also provides certain data items describing the device.
///
struct _EFI_ABSOLUTE_POINTER_PROTOCOL {
  EFI_ABSOLUTE_POINTER_RESET        Reset;
  EFI_ABSOLUTE_POINTER_GET_STATE    GetState;
  ///
  /// Event to use with WaitForEvent() to wait for input from the pointer device.
  ///
  EFI_EVENT                         WaitForInput;
  ///
  /// Pointer to EFI_ABSOLUTE_POINTER_MODE data.
  ///
  EFI_ABSOLUTE_POINTER_MODE         *Mode;
};

extern EFI_GUID  gEfiAbsolutePointerProtocolGuid;

#endif