VirtualBox

source: vbox/trunk/src/VBox/Devices/EFI/Firmware/NetworkPkg/IScsiDxe/IScsiMisc.c@ 70372

最後變更 在這個檔案從70372是 58466,由 vboxsync 提交於 9 年 前

EFI/Firmware: Merged in the svn:eol-style, svn:mime-type and trailing whitespace cleanup that was done after the initial UDK2014.SP1 import: svn merge /vendor/edk2/UDK2014.SP1 /vendor/edk2/current .
  • 屬性 svn:eol-style 設為 native
檔案大小: 40.5 KB
行 
1/** @file
2 Miscellaneous routines for iSCSI driver.
3
4Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
5This program and the accompanying materials
6are licensed and made available under the terms and conditions of the BSD License
7which accompanies this distribution. The full text of the license may be found at
8http://opensource.org/licenses/bsd-license.php
9
10THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
11WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
12
13**/
14
15#include "IScsiImpl.h"
16
17GLOBAL_REMOVE_IF_UNREFERENCED CONST CHAR8 IScsiHexString[] = "0123456789ABCDEFabcdef";
18
19/**
20 Removes (trims) specified leading and trailing characters from a string.
21
22 @param[in, out] Str Pointer to the null-terminated string to be trimmed.
23 On return, Str will hold the trimmed string.
24
25 @param[in] CharC Character will be trimmed from str.
26
27**/
28VOID
29IScsiStrTrim (
30 IN OUT CHAR16 *Str,
31 IN CHAR16 CharC
32 )
33{
34 CHAR16 *Pointer1;
35 CHAR16 *Pointer2;
36
37 if (*Str == 0) {
38 return ;
39 }
40
41 //
42 // Trim off the leading and trailing characters c
43 //
44 for (Pointer1 = Str; (*Pointer1 != 0) && (*Pointer1 == CharC); Pointer1++) {
45 ;
46 }
47
48 Pointer2 = Str;
49 if (Pointer2 == Pointer1) {
50 while (*Pointer1 != 0) {
51 Pointer2++;
52 Pointer1++;
53 }
54 } else {
55 while (*Pointer1 != 0) {
56 *Pointer2 = *Pointer1;
57 Pointer1++;
58 Pointer2++;
59 }
60 *Pointer2 = 0;
61 }
62
63
64 for (Pointer1 = Str + StrLen(Str) - 1; Pointer1 >= Str && *Pointer1 == CharC; Pointer1--) {
65 ;
66 }
67 if (Pointer1 != Str + StrLen(Str) - 1) {
68 *(Pointer1 + 1) = 0;
69 }
70}
71
72/**
73 Calculate the prefix length of the IPv4 subnet mask.
74
75 @param[in] SubnetMask The IPv4 subnet mask.
76
77 @return The prefix length of the subnet mask.
78 @retval 0 Other errors as indicated.
79
80**/
81UINT8
82IScsiGetSubnetMaskPrefixLength (
83 IN EFI_IPv4_ADDRESS *SubnetMask
84 )
85{
86 UINT8 Len;
87 UINT32 ReverseMask;
88
89 //
90 // The SubnetMask is in network byte order.
91 //
92 ReverseMask = (SubnetMask->Addr[0] << 24) | (SubnetMask->Addr[1] << 16) | (SubnetMask->Addr[2] << 8) | (SubnetMask->Addr[3]);
93
94 //
95 // Reverse it.
96 //
97 ReverseMask = ~ReverseMask;
98
99 if ((ReverseMask & (ReverseMask + 1)) != 0) {
100 return 0;
101 }
102
103 Len = 0;
104
105 while (ReverseMask != 0) {
106 ReverseMask = ReverseMask >> 1;
107 Len++;
108 }
109
110 return (UINT8) (32 - Len);
111}
112
113
114/**
115 Convert the hexadecimal encoded LUN string into the 64-bit LUN.
116
117 @param[in] Str The hexadecimal encoded LUN string.
118 @param[out] Lun Storage to return the 64-bit LUN.
119
120 @retval EFI_SUCCESS The 64-bit LUN is stored in Lun.
121 @retval EFI_INVALID_PARAMETER The string is malformatted.
122
123**/
124EFI_STATUS
125IScsiAsciiStrToLun (
126 IN CHAR8 *Str,
127 OUT UINT8 *Lun
128 )
129{
130 UINTN Index, IndexValue, IndexNum, SizeStr;
131 CHAR8 TemStr[2];
132 UINT8 TemValue;
133 UINT16 Value[4];
134
135 ZeroMem (Lun, 8);
136 ZeroMem (TemStr, 2);
137 ZeroMem ((UINT8 *) Value, sizeof (Value));
138 SizeStr = AsciiStrLen (Str);
139 IndexValue = 0;
140 IndexNum = 0;
141
142 for (Index = 0; Index < SizeStr; Index ++) {
143 TemStr[0] = Str[Index];
144 TemValue = (UINT8) AsciiStrHexToUint64 (TemStr);
145 if (TemValue == 0 && TemStr[0] != '0') {
146 if ((TemStr[0] != '-') || (IndexNum == 0)) {
147 //
148 // Invalid Lun Char.
149 //
150 return EFI_INVALID_PARAMETER;
151 }
152 }
153
154 if ((TemValue == 0) && (TemStr[0] == '-')) {
155 //
156 // Next Lun value.
157 //
158 if (++IndexValue >= 4) {
159 //
160 // Max 4 Lun value.
161 //
162 return EFI_INVALID_PARAMETER;
163 }
164 //
165 // Restart str index for the next lun value.
166 //
167 IndexNum = 0;
168 continue;
169 }
170
171 if (++IndexNum > 4) {
172 //
173 // Each Lun Str can't exceed size 4, because it will be as UINT16 value.
174 //
175 return EFI_INVALID_PARAMETER;
176 }
177
178 //
179 // Combine UINT16 value.
180 //
181 Value[IndexValue] = (UINT16) ((Value[IndexValue] << 4) + TemValue);
182 }
183
184 for (Index = 0; Index <= IndexValue; Index ++) {
185 *((UINT16 *) &Lun[Index * 2]) = HTONS (Value[Index]);
186 }
187
188 return EFI_SUCCESS;
189}
190
191/**
192 Convert the 64-bit LUN into the hexadecimal encoded LUN string.
193
194 @param[in] Lun The 64-bit LUN.
195 @param[out] Str The storage to return the hexadecimal encoded LUN string.
196
197**/
198VOID
199IScsiLunToUnicodeStr (
200 IN UINT8 *Lun,
201 OUT CHAR16 *Str
202 )
203{
204 UINTN Index;
205 CHAR16 *TempStr;
206
207 TempStr = Str;
208
209 for (Index = 0; Index < 4; Index++) {
210
211 if ((Lun[2 * Index] | Lun[2 * Index + 1]) == 0) {
212 CopyMem (TempStr, L"0-", sizeof (L"0-"));
213 } else {
214 TempStr[0] = (CHAR16) IScsiHexString[Lun[2 * Index] >> 4];
215 TempStr[1] = (CHAR16) IScsiHexString[Lun[2 * Index] & 0x0F];
216 TempStr[2] = (CHAR16) IScsiHexString[Lun[2 * Index + 1] >> 4];
217 TempStr[3] = (CHAR16) IScsiHexString[Lun[2 * Index + 1] & 0x0F];
218 TempStr[4] = L'-';
219 TempStr[5] = 0;
220
221 IScsiStrTrim (TempStr, L'0');
222 }
223
224 TempStr += StrLen (TempStr);
225 }
226 //
227 // Remove the last '-'
228 //
229 ASSERT (StrLen(Str) >= 1);
230 Str[StrLen (Str) - 1] = 0;
231
232 for (Index = StrLen (Str) - 1; Index > 1; Index = Index - 2) {
233 if ((Str[Index] == L'0') && (Str[Index - 1] == L'-')) {
234 Str[Index - 1] = 0;
235 } else {
236 break;
237 }
238 }
239}
240
241/**
242 Convert the formatted IP address into the binary IP address.
243
244 @param[in] Str The UNICODE string.
245 @param[in] IpMode Indicates whether the IP address is v4 or v6.
246 @param[out] Ip The storage to return the ASCII string.
247
248 @retval EFI_SUCCESS The binary IP address is returned in Ip.
249 @retval EFI_INVALID_PARAMETER The IP string is malformatted or IpMode is
250 invalid.
251
252**/
253EFI_STATUS
254IScsiAsciiStrToIp (
255 IN CHAR8 *Str,
256 IN UINT8 IpMode,
257 OUT EFI_IP_ADDRESS *Ip
258 )
259{
260 EFI_STATUS Status;
261
262 if (IpMode == IP_MODE_IP4 || IpMode == IP_MODE_AUTOCONFIG_IP4) {
263 return NetLibAsciiStrToIp4 (Str, &Ip->v4);
264
265 } else if (IpMode == IP_MODE_IP6 || IpMode == IP_MODE_AUTOCONFIG_IP6) {
266 return NetLibAsciiStrToIp6 (Str, &Ip->v6);
267
268 } else if (IpMode == IP_MODE_AUTOCONFIG) {
269 Status = NetLibAsciiStrToIp4 (Str, &Ip->v4);
270 if (!EFI_ERROR (Status)) {
271 return Status;
272 }
273 return NetLibAsciiStrToIp6 (Str, &Ip->v6);
274
275 }
276
277 return EFI_INVALID_PARAMETER;
278}
279
280/**
281 Convert the mac address into a hexadecimal encoded "-" seperated string.
282
283 @param[in] Mac The mac address.
284 @param[in] Len Length in bytes of the mac address.
285 @param[in] VlanId VLAN ID of the network device.
286 @param[out] Str The storage to return the mac string.
287
288**/
289VOID
290IScsiMacAddrToStr (
291 IN EFI_MAC_ADDRESS *Mac,
292 IN UINT32 Len,
293 IN UINT16 VlanId,
294 OUT CHAR16 *Str
295 )
296{
297 UINT32 Index;
298 CHAR16 *String;
299
300 for (Index = 0; Index < Len; Index++) {
301 Str[3 * Index] = (CHAR16) IScsiHexString[(Mac->Addr[Index] >> 4) & 0x0F];
302 Str[3 * Index + 1] = (CHAR16) IScsiHexString[Mac->Addr[Index] & 0x0F];
303 Str[3 * Index + 2] = L':';
304 }
305
306 String = &Str[3 * Index - 1] ;
307 if (VlanId != 0) {
308 String += UnicodeSPrint (String, 6 * sizeof (CHAR16), L"\\%04x", (UINTN) VlanId);
309 }
310
311 *String = L'\0';
312}
313
314/**
315 Convert the binary encoded buffer into a hexadecimal encoded string.
316
317 @param[in] BinBuffer The buffer containing the binary data.
318 @param[in] BinLength Length of the binary buffer.
319 @param[in, out] HexStr Pointer to the string.
320 @param[in, out] HexLength The length of the string.
321
322 @retval EFI_SUCCESS The binary data is converted to the hexadecimal string
323 and the length of the string is updated.
324 @retval EFI_BUFFER_TOO_SMALL The string is too small.
325 @retval EFI_INVALID_PARAMETER The IP string is malformatted.
326
327**/
328EFI_STATUS
329IScsiBinToHex (
330 IN UINT8 *BinBuffer,
331 IN UINT32 BinLength,
332 IN OUT CHAR8 *HexStr,
333 IN OUT UINT32 *HexLength
334 )
335{
336 UINTN Index;
337
338 if ((HexStr == NULL) || (BinBuffer == NULL) || (BinLength == 0)) {
339 return EFI_INVALID_PARAMETER;
340 }
341
342 if (((*HexLength) - 3) < BinLength * 2) {
343 *HexLength = BinLength * 2 + 3;
344 return EFI_BUFFER_TOO_SMALL;
345 }
346
347 *HexLength = BinLength * 2 + 3;
348 //
349 // Prefix for Hex String.
350 //
351 HexStr[0] = '0';
352 HexStr[1] = 'x';
353
354 for (Index = 0; Index < BinLength; Index++) {
355 HexStr[Index * 2 + 2] = IScsiHexString[BinBuffer[Index] >> 4];
356 HexStr[Index * 2 + 3] = IScsiHexString[BinBuffer[Index] & 0xf];
357 }
358
359 HexStr[Index * 2 + 2] = '\0';
360
361 return EFI_SUCCESS;
362}
363
364
365/**
366 Convert the hexadecimal string into a binary encoded buffer.
367
368 @param[in, out] BinBuffer The binary buffer.
369 @param[in, out] BinLength Length of the binary buffer.
370 @param[in] HexStr The hexadecimal string.
371
372 @retval EFI_SUCCESS The hexadecimal string is converted into a binary
373 encoded buffer.
374 @retval EFI_BUFFER_TOO_SMALL The binary buffer is too small to hold the converted data.
375
376**/
377EFI_STATUS
378IScsiHexToBin (
379 IN OUT UINT8 *BinBuffer,
380 IN OUT UINT32 *BinLength,
381 IN CHAR8 *HexStr
382 )
383{
384 UINTN Index;
385 UINTN Length;
386 UINT8 Digit;
387 CHAR8 TemStr[2];
388
389 ZeroMem (TemStr, sizeof (TemStr));
390
391 //
392 // Find out how many hex characters the string has.
393 //
394 if ((HexStr[0] == '0') && ((HexStr[1] == 'x') || (HexStr[1] == 'X'))) {
395 HexStr += 2;
396 }
397
398 Length = AsciiStrLen (HexStr);
399
400 for (Index = 0; Index < Length; Index ++) {
401 TemStr[0] = HexStr[Index];
402 Digit = (UINT8) AsciiStrHexToUint64 (TemStr);
403 if (Digit == 0 && TemStr[0] != '0') {
404 //
405 // Invalid Lun Char.
406 //
407 break;
408 }
409 if ((Index & 1) == 0) {
410 BinBuffer [Index/2] = Digit;
411 } else {
412 BinBuffer [Index/2] = (UINT8) ((BinBuffer [Index/2] << 4) + Digit);
413 }
414 }
415
416 *BinLength = (UINT32) ((Index + 1)/2);
417
418 return EFI_SUCCESS;
419}
420
421
422/**
423 Convert the decimal-constant string or hex-constant string into a numerical value.
424
425 @param[in] Str String in decimal or hex.
426
427 @return The numerical value.
428
429**/
430UINTN
431IScsiNetNtoi (
432 IN CHAR8 *Str
433 )
434{
435 if ((Str[0] == '0') && ((Str[1] == 'x') || (Str[1] == 'X'))) {
436 Str += 2;
437
438 return AsciiStrHexToUintn (Str);
439 }
440
441 return AsciiStrDecimalToUintn (Str);
442}
443
444
445/**
446 Generate random numbers.
447
448 @param[in, out] Rand The buffer to contain random numbers.
449 @param[in] RandLength The length of the Rand buffer.
450
451**/
452VOID
453IScsiGenRandom (
454 IN OUT UINT8 *Rand,
455 IN UINTN RandLength
456 )
457{
458 UINT32 Random;
459
460 while (RandLength > 0) {
461 Random = NET_RANDOM (NetRandomInitSeed ());
462 *Rand++ = (UINT8) (Random);
463 RandLength--;
464 }
465}
466
467
468/**
469 Record the NIC info in global structure.
470
471 @param[in] Controller The handle of the controller.
472
473 @retval EFI_SUCCESS The operation is completed.
474 @retval EFI_OUT_OF_RESOURCES Do not have sufficient resources to finish this
475 operation.
476
477**/
478EFI_STATUS
479IScsiAddNic (
480 IN EFI_HANDLE Controller
481 )
482{
483 EFI_STATUS Status;
484 ISCSI_NIC_INFO *NicInfo;
485 LIST_ENTRY *Entry;
486 EFI_MAC_ADDRESS MacAddr;
487 UINTN HwAddressSize;
488 UINT16 VlanId;
489
490 //
491 // Get MAC address of this network device.
492 //
493 Status = NetLibGetMacAddress (Controller, &MacAddr, &HwAddressSize);
494 if (EFI_ERROR (Status)) {
495 return Status;
496 }
497
498 //
499 // Get VLAN ID of this network device.
500 //
501 VlanId = NetLibGetVlanId (Controller);
502
503 //
504 // Check whether the NIC info already exists. Return directly if so.
505 //
506 NET_LIST_FOR_EACH (Entry, &mPrivate->NicInfoList) {
507 NicInfo = NET_LIST_USER_STRUCT (Entry, ISCSI_NIC_INFO, Link);
508 if (NicInfo->HwAddressSize == HwAddressSize &&
509 CompareMem (&NicInfo->PermanentAddress, MacAddr.Addr, HwAddressSize) == 0 &&
510 NicInfo->VlanId == VlanId) {
511 mPrivate->CurrentNic = NicInfo->NicIndex;
512 return EFI_SUCCESS;
513 }
514
515 if (mPrivate->MaxNic < NicInfo->NicIndex) {
516 mPrivate->MaxNic = NicInfo->NicIndex;
517 }
518 }
519
520 //
521 // Record the NIC info in private structure.
522 //
523 NicInfo = AllocateZeroPool (sizeof (ISCSI_NIC_INFO));
524 if (NicInfo == NULL) {
525 return EFI_OUT_OF_RESOURCES;
526 }
527
528 CopyMem (&NicInfo->PermanentAddress, MacAddr.Addr, HwAddressSize);
529 NicInfo->HwAddressSize = (UINT32) HwAddressSize;
530 NicInfo->VlanId = VlanId;
531 NicInfo->NicIndex = (UINT8) (mPrivate->MaxNic + 1);
532 mPrivate->MaxNic = NicInfo->NicIndex;
533
534 //
535 // Get the PCI location.
536 //
537 IScsiGetNICPciLocation (
538 Controller,
539 &NicInfo->BusNumber,
540 &NicInfo->DeviceNumber,
541 &NicInfo->FunctionNumber
542 );
543
544 InsertTailList (&mPrivate->NicInfoList, &NicInfo->Link);
545 mPrivate->NicCount++;
546
547 mPrivate->CurrentNic = NicInfo->NicIndex;
548 return EFI_SUCCESS;
549}
550
551
552/**
553 Delete the recorded NIC info from global structure. Also delete corresponding
554 attempts.
555
556 @param[in] Controller The handle of the controller.
557
558 @retval EFI_SUCCESS The operation is completed.
559 @retval EFI_NOT_FOUND The NIC info to be deleted is not recorded.
560
561**/
562EFI_STATUS
563IScsiRemoveNic (
564 IN EFI_HANDLE Controller
565 )
566{
567 EFI_STATUS Status;
568 ISCSI_NIC_INFO *NicInfo;
569 LIST_ENTRY *Entry;
570 LIST_ENTRY *NextEntry;
571 ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
572 ISCSI_NIC_INFO *ThisNic;
573 EFI_MAC_ADDRESS MacAddr;
574 UINTN HwAddressSize;
575 UINT16 VlanId;
576
577 //
578 // Get MAC address of this network device.
579 //
580 Status = NetLibGetMacAddress (Controller, &MacAddr, &HwAddressSize);
581 if (EFI_ERROR (Status)) {
582 return Status;
583 }
584
585 //
586 // Get VLAN ID of this network device.
587 //
588 VlanId = NetLibGetVlanId (Controller);
589
590 //
591 // Check whether the NIC information exists.
592 //
593 ThisNic = NULL;
594
595 NET_LIST_FOR_EACH (Entry, &mPrivate->NicInfoList) {
596 NicInfo = NET_LIST_USER_STRUCT (Entry, ISCSI_NIC_INFO, Link);
597 if (NicInfo->HwAddressSize == HwAddressSize &&
598 CompareMem (&NicInfo->PermanentAddress, MacAddr.Addr, HwAddressSize) == 0 &&
599 NicInfo->VlanId == VlanId) {
600
601 ThisNic = NicInfo;
602 break;
603 }
604 }
605
606 if (ThisNic == NULL) {
607 return EFI_NOT_FOUND;
608 }
609
610 mPrivate->CurrentNic = ThisNic->NicIndex;
611
612 RemoveEntryList (&ThisNic->Link);
613 FreePool (ThisNic);
614 mPrivate->NicCount--;
615
616 //
617 // Remove all attempts related to this NIC.
618 //
619 NET_LIST_FOR_EACH_SAFE (Entry, NextEntry, &mPrivate->AttemptConfigs) {
620 AttemptConfigData = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
621 if (AttemptConfigData->NicIndex == mPrivate->CurrentNic) {
622 RemoveEntryList (&AttemptConfigData->Link);
623 mPrivate->AttemptCount--;
624
625 if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED_FOR_MPIO && mPrivate->MpioCount > 0) {
626 if (--mPrivate->MpioCount == 0) {
627 mPrivate->EnableMpio = FALSE;
628 }
629
630 if (AttemptConfigData->AuthenticationType == ISCSI_AUTH_TYPE_KRB && mPrivate->Krb5MpioCount > 0) {
631 mPrivate->Krb5MpioCount--;
632 }
633
634 } else if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED && mPrivate->SinglePathCount > 0) {
635 mPrivate->SinglePathCount--;
636
637 if (mPrivate->ValidSinglePathCount > 0) {
638 mPrivate->ValidSinglePathCount--;
639 }
640 }
641
642 FreePool (AttemptConfigData);
643 }
644 }
645
646 //
647 // Free attempt is created but not saved to system.
648 //
649 if (mPrivate->NewAttempt != NULL) {
650 FreePool (mPrivate->NewAttempt);
651 mPrivate->NewAttempt = NULL;
652 }
653
654 return EFI_SUCCESS;
655}
656
657
658/**
659 Get the recorded NIC info from global structure by the Index.
660
661 @param[in] NicIndex The index indicates the position of NIC info.
662
663 @return Pointer to the NIC info, or NULL if not found.
664
665**/
666ISCSI_NIC_INFO *
667IScsiGetNicInfoByIndex (
668 IN UINT8 NicIndex
669 )
670{
671 LIST_ENTRY *Entry;
672 ISCSI_NIC_INFO *NicInfo;
673
674 NET_LIST_FOR_EACH (Entry, &mPrivate->NicInfoList) {
675 NicInfo = NET_LIST_USER_STRUCT (Entry, ISCSI_NIC_INFO, Link);
676 if (NicInfo->NicIndex == NicIndex) {
677 return NicInfo;
678 }
679 }
680
681 return NULL;
682}
683
684
685/**
686 Get the NIC's PCI location and return it accroding to the composited
687 format defined in iSCSI Boot Firmware Table.
688
689 @param[in] Controller The handle of the controller.
690 @param[out] Bus The bus number.
691 @param[out] Device The device number.
692 @param[out] Function The function number.
693
694 @return The composited representation of the NIC PCI location.
695
696**/
697UINT16
698IScsiGetNICPciLocation (
699 IN EFI_HANDLE Controller,
700 OUT UINTN *Bus,
701 OUT UINTN *Device,
702 OUT UINTN *Function
703 )
704{
705 EFI_STATUS Status;
706 EFI_DEVICE_PATH_PROTOCOL *DevicePath;
707 EFI_HANDLE PciIoHandle;
708 EFI_PCI_IO_PROTOCOL *PciIo;
709 UINTN Segment;
710
711 Status = gBS->HandleProtocol (
712 Controller,
713 &gEfiDevicePathProtocolGuid,
714 (VOID **) &DevicePath
715 );
716 if (EFI_ERROR (Status)) {
717 return 0;
718 }
719
720 Status = gBS->LocateDevicePath (
721 &gEfiPciIoProtocolGuid,
722 &DevicePath,
723 &PciIoHandle
724 );
725 if (EFI_ERROR (Status)) {
726 return 0;
727 }
728
729 Status = gBS->HandleProtocol (PciIoHandle, &gEfiPciIoProtocolGuid, (VOID **) &PciIo);
730 if (EFI_ERROR (Status)) {
731 return 0;
732 }
733
734 Status = PciIo->GetLocation (PciIo, &Segment, Bus, Device, Function);
735 if (EFI_ERROR (Status)) {
736 return 0;
737 }
738
739 return (UINT16) ((*Bus << 8) | (*Device << 3) | *Function);
740}
741
742
743/**
744 Read the EFI variable (VendorGuid/Name) and return a dynamically allocated
745 buffer, and the size of the buffer. If failure, return NULL.
746
747 @param[in] Name String part of EFI variable name.
748 @param[in] VendorGuid GUID part of EFI variable name.
749 @param[out] VariableSize Returns the size of the EFI variable that was read.
750
751 @return Dynamically allocated memory that contains a copy of the EFI variable.
752 @return Caller is responsible freeing the buffer.
753 @retval NULL Variable was not read.
754
755**/
756VOID *
757IScsiGetVariableAndSize (
758 IN CHAR16 *Name,
759 IN EFI_GUID *VendorGuid,
760 OUT UINTN *VariableSize
761 )
762{
763 EFI_STATUS Status;
764 UINTN BufferSize;
765 VOID *Buffer;
766
767 Buffer = NULL;
768
769 //
770 // Pass in a zero size buffer to find the required buffer size.
771 //
772 BufferSize = 0;
773 Status = gRT->GetVariable (Name, VendorGuid, NULL, &BufferSize, Buffer);
774 if (Status == EFI_BUFFER_TOO_SMALL) {
775 //
776 // Allocate the buffer to return
777 //
778 Buffer = AllocateZeroPool (BufferSize);
779 if (Buffer == NULL) {
780 return NULL;
781 }
782 //
783 // Read variable into the allocated buffer.
784 //
785 Status = gRT->GetVariable (Name, VendorGuid, NULL, &BufferSize, Buffer);
786 if (EFI_ERROR (Status)) {
787 BufferSize = 0;
788 }
789 }
790
791 *VariableSize = BufferSize;
792 return Buffer;
793}
794
795
796/**
797 Create the iSCSI driver data.
798
799 @param[in] Image The handle of the driver image.
800 @param[in] Controller The handle of the controller.
801
802 @return The iSCSI driver data created.
803 @retval NULL Other errors as indicated.
804
805**/
806ISCSI_DRIVER_DATA *
807IScsiCreateDriverData (
808 IN EFI_HANDLE Image,
809 IN EFI_HANDLE Controller
810 )
811{
812 ISCSI_DRIVER_DATA *Private;
813 EFI_STATUS Status;
814
815 Private = AllocateZeroPool (sizeof (ISCSI_DRIVER_DATA));
816 if (Private == NULL) {
817 return NULL;
818 }
819
820 Private->Signature = ISCSI_DRIVER_DATA_SIGNATURE;
821 Private->Image = Image;
822 Private->Controller = Controller;
823 Private->Session = NULL;
824
825 //
826 // Create an event to be signaled when the BS to RT transition is triggerd so
827 // as to abort the iSCSI session.
828 //
829 Status = gBS->CreateEventEx (
830 EVT_NOTIFY_SIGNAL,
831 TPL_CALLBACK,
832 IScsiOnExitBootService,
833 Private,
834 &gEfiEventExitBootServicesGuid,
835 &Private->ExitBootServiceEvent
836 );
837 if (EFI_ERROR (Status)) {
838 FreePool (Private);
839 return NULL;
840 }
841
842 Private->ExtScsiPassThruHandle = NULL;
843 CopyMem(&Private->IScsiExtScsiPassThru, &gIScsiExtScsiPassThruProtocolTemplate, sizeof(EFI_EXT_SCSI_PASS_THRU_PROTOCOL));
844
845 //
846 // 0 is designated to the TargetId, so use another value for the AdapterId.
847 //
848 Private->ExtScsiPassThruMode.AdapterId = 2;
849 Private->ExtScsiPassThruMode.Attributes = EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL;
850 Private->ExtScsiPassThruMode.IoAlign = 4;
851 Private->IScsiExtScsiPassThru.Mode = &Private->ExtScsiPassThruMode;
852
853 return Private;
854}
855
856
857/**
858 Clean the iSCSI driver data.
859
860 @param[in] Private The iSCSI driver data.
861
862**/
863VOID
864IScsiCleanDriverData (
865 IN ISCSI_DRIVER_DATA *Private
866 )
867{
868 EFI_STATUS Status;
869
870 if (Private->DevicePath != NULL) {
871 gBS->UninstallProtocolInterface (
872 Private->ExtScsiPassThruHandle,
873 &gEfiDevicePathProtocolGuid,
874 Private->DevicePath
875 );
876
877 FreePool (Private->DevicePath);
878 }
879
880 if (Private->ExtScsiPassThruHandle != NULL) {
881 Status = gBS->UninstallProtocolInterface (
882 Private->ExtScsiPassThruHandle,
883 &gEfiExtScsiPassThruProtocolGuid,
884 &Private->IScsiExtScsiPassThru
885 );
886 if (!EFI_ERROR (Status)) {
887 mPrivate->OneSessionEstablished = FALSE;
888 }
889 }
890
891 gBS->CloseEvent (Private->ExitBootServiceEvent);
892
893 FreePool (Private);
894}
895
896/**
897 Check wheather the Controller handle is configured to use DHCP protocol.
898
899 @param[in] Controller The handle of the controller.
900 @param[in] IpVersion IP_VERSION_4 or IP_VERSION_6.
901
902 @retval TRUE The handle of the controller need the Dhcp protocol.
903 @retval FALSE The handle of the controller does not need the Dhcp protocol.
904
905**/
906BOOLEAN
907IScsiDhcpIsConfigured (
908 IN EFI_HANDLE Controller,
909 IN UINT8 IpVersion
910 )
911{
912 ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptTmp;
913 UINT8 *AttemptConfigOrder;
914 UINTN AttemptConfigOrderSize;
915 UINTN Index;
916 EFI_STATUS Status;
917 EFI_MAC_ADDRESS MacAddr;
918 UINTN HwAddressSize;
919 UINT16 VlanId;
920 CHAR16 MacString[ISCSI_MAX_MAC_STRING_LEN];
921 CHAR16 AttemptName[ISCSI_NAME_IFR_MAX_SIZE];
922
923 AttemptConfigOrder = IScsiGetVariableAndSize (
924 L"AttemptOrder",
925 &gIScsiConfigGuid,
926 &AttemptConfigOrderSize
927 );
928 if (AttemptConfigOrder == NULL || AttemptConfigOrderSize == 0) {
929 return FALSE;
930 }
931
932 //
933 // Get MAC address of this network device.
934 //
935 Status = NetLibGetMacAddress (Controller, &MacAddr, &HwAddressSize);
936 if(EFI_ERROR (Status)) {
937 return FALSE;
938 }
939 //
940 // Get VLAN ID of this network device.
941 //
942 VlanId = NetLibGetVlanId (Controller);
943 IScsiMacAddrToStr (&MacAddr, (UINT32) HwAddressSize, VlanId, MacString);
944
945 for (Index = 0; Index < AttemptConfigOrderSize / sizeof (UINT8); Index++) {
946 UnicodeSPrint (
947 AttemptName,
948 (UINTN) 128,
949 L"%s%d",
950 MacString,
951 (UINTN) AttemptConfigOrder[Index]
952 );
953 Status = GetVariable2 (
954 AttemptName,
955 &gEfiIScsiInitiatorNameProtocolGuid,
956 (VOID**)&AttemptTmp,
957 NULL
958 );
959 if(AttemptTmp == NULL || EFI_ERROR (Status)) {
960 continue;
961 }
962
963 ASSERT (AttemptConfigOrder[Index] == AttemptTmp->AttemptConfigIndex);
964
965 if (AttemptTmp->SessionConfigData.Enabled == ISCSI_DISABLED) {
966 FreePool (AttemptTmp);
967 continue;
968 }
969
970 if (AttemptTmp->SessionConfigData.IpMode != IP_MODE_AUTOCONFIG &&
971 AttemptTmp->SessionConfigData.IpMode != ((IpVersion == IP_VERSION_4) ? IP_MODE_IP4 : IP_MODE_IP6)) {
972 FreePool (AttemptTmp);
973 continue;
974 }
975
976 if(AttemptTmp->SessionConfigData.IpMode == IP_MODE_AUTOCONFIG ||
977 AttemptTmp->SessionConfigData.InitiatorInfoFromDhcp == TRUE ||
978 AttemptTmp->SessionConfigData.TargetInfoFromDhcp == TRUE) {
979 FreePool (AttemptTmp);
980 FreePool (AttemptConfigOrder);
981 return TRUE;
982 }
983
984 FreePool (AttemptTmp);
985 }
986
987 FreePool (AttemptConfigOrder);
988 return FALSE;
989}
990
991/**
992 Get the various configuration data.
993
994 @param[in] Private The iSCSI driver data.
995
996 @retval EFI_SUCCESS The configuration data is retrieved.
997 @retval EFI_NOT_FOUND This iSCSI driver is not configured yet.
998
999**/
1000EFI_STATUS
1001IScsiGetConfigData (
1002 IN ISCSI_DRIVER_DATA *Private
1003 )
1004{
1005 EFI_STATUS Status;
1006 CHAR16 MacString[ISCSI_MAX_MAC_STRING_LEN];
1007 UINTN Index;
1008 ISCSI_NIC_INFO *NicInfo;
1009 ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
1010 ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptTmp;
1011 UINT8 *AttemptConfigOrder;
1012 UINTN AttemptConfigOrderSize;
1013 CHAR16 IScsiMode[64];
1014 CHAR16 IpMode[64];
1015
1016 //
1017 // There should be at least one attempt configured.
1018 //
1019 AttemptConfigOrder = IScsiGetVariableAndSize (
1020 L"AttemptOrder",
1021 &gIScsiConfigGuid,
1022 &AttemptConfigOrderSize
1023 );
1024 if (AttemptConfigOrder == NULL || AttemptConfigOrderSize == 0) {
1025 return EFI_NOT_FOUND;
1026 }
1027
1028 //
1029 // Get the iSCSI Initiator Name.
1030 //
1031 mPrivate->InitiatorNameLength = ISCSI_NAME_MAX_SIZE;
1032 Status = gIScsiInitiatorName.Get (
1033 &gIScsiInitiatorName,
1034 &mPrivate->InitiatorNameLength,
1035 mPrivate->InitiatorName
1036 );
1037 if (EFI_ERROR (Status)) {
1038 return Status;
1039 }
1040
1041 //
1042 // Get the normal configuration.
1043 //
1044 for (Index = 0; Index < AttemptConfigOrderSize / sizeof (UINT8); Index++) {
1045
1046 //
1047 // Check whether the attempt exists in AttemptConfig.
1048 //
1049 AttemptTmp = IScsiConfigGetAttemptByConfigIndex (AttemptConfigOrder[Index]);
1050 if (AttemptTmp != NULL && AttemptTmp->SessionConfigData.Enabled == ISCSI_DISABLED) {
1051 continue;
1052 } else if (AttemptTmp != NULL && AttemptTmp->SessionConfigData.Enabled != ISCSI_DISABLED) {
1053 //
1054 // Check the autoconfig path to see whether it should be retried.
1055 //
1056 if (AttemptTmp->SessionConfigData.IpMode == IP_MODE_AUTOCONFIG &&
1057 AttemptTmp->AutoConfigureMode != IP_MODE_AUTOCONFIG_SUCCESS) {
1058 if (mPrivate->Ipv6Flag &&
1059 AttemptTmp->AutoConfigureMode == IP_MODE_AUTOCONFIG_IP6) {
1060 //
1061 // Autoconfigure for IP6 already attempted but failed. Do not try again.
1062 //
1063 continue;
1064 } else if (!mPrivate->Ipv6Flag &&
1065 AttemptTmp->AutoConfigureMode == IP_MODE_AUTOCONFIG_IP4) {
1066 //
1067 // Autoconfigure for IP4 already attempted but failed. Do not try again.
1068 //
1069 continue;
1070 } else {
1071 //
1072 // Try another approach for this autoconfigure path.
1073 //
1074 AttemptTmp->AutoConfigureMode =
1075 (UINT8) (mPrivate->Ipv6Flag ? IP_MODE_AUTOCONFIG_IP6 : IP_MODE_AUTOCONFIG_IP4);
1076 AttemptTmp->SessionConfigData.InitiatorInfoFromDhcp = TRUE;
1077 AttemptTmp->SessionConfigData.TargetInfoFromDhcp = TRUE;
1078 AttemptTmp->DhcpSuccess = FALSE;
1079
1080 //
1081 // Get some information from the dhcp server.
1082 //
1083 if (!mPrivate->Ipv6Flag) {
1084 Status = IScsiDoDhcp (Private->Image, Private->Controller, AttemptTmp);
1085 if (!EFI_ERROR (Status)) {
1086 AttemptTmp->DhcpSuccess = TRUE;
1087 }
1088 } else {
1089 Status = IScsiDoDhcp6 (Private->Image, Private->Controller, AttemptTmp);
1090 if (!EFI_ERROR (Status)) {
1091 AttemptTmp->DhcpSuccess = TRUE;
1092 }
1093 }
1094
1095 //
1096 // Refresh the state of this attempt to NVR.
1097 //
1098 AsciiStrToUnicodeStr (AttemptTmp->MacString, MacString);
1099 UnicodeSPrint (
1100 mPrivate->PortString,
1101 (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
1102 L"%s%d",
1103 MacString,
1104 (UINTN) AttemptTmp->AttemptConfigIndex
1105 );
1106
1107 gRT->SetVariable (
1108 mPrivate->PortString,
1109 &gEfiIScsiInitiatorNameProtocolGuid,
1110 ISCSI_CONFIG_VAR_ATTR,
1111 sizeof (ISCSI_ATTEMPT_CONFIG_NVDATA),
1112 AttemptTmp
1113 );
1114
1115 continue;
1116 }
1117 } else if (AttemptTmp->SessionConfigData.InitiatorInfoFromDhcp && !AttemptTmp->ValidPath) {
1118 //
1119 // Get DHCP information for already added, but failed, attempt.
1120 //
1121 AttemptTmp->DhcpSuccess = FALSE;
1122 if (!mPrivate->Ipv6Flag && (AttemptTmp->SessionConfigData.IpMode == IP_MODE_IP4)) {
1123 Status = IScsiDoDhcp (Private->Image, Private->Controller, AttemptTmp);
1124 if (!EFI_ERROR (Status)) {
1125 AttemptTmp->DhcpSuccess = TRUE;
1126 }
1127 } else if (mPrivate->Ipv6Flag && (AttemptTmp->SessionConfigData.IpMode == IP_MODE_IP6)) {
1128 Status = IScsiDoDhcp6 (Private->Image, Private->Controller, AttemptTmp);
1129 if (!EFI_ERROR (Status)) {
1130 AttemptTmp->DhcpSuccess = TRUE;
1131 }
1132 }
1133
1134 //
1135 // Refresh the state of this attempt to NVR.
1136 //
1137 AsciiStrToUnicodeStr (AttemptTmp->MacString, MacString);
1138 UnicodeSPrint (
1139 mPrivate->PortString,
1140 (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
1141 L"%s%d",
1142 MacString,
1143 (UINTN) AttemptTmp->AttemptConfigIndex
1144 );
1145
1146 gRT->SetVariable (
1147 mPrivate->PortString,
1148 &gEfiIScsiInitiatorNameProtocolGuid,
1149 ISCSI_CONFIG_VAR_ATTR,
1150 sizeof (ISCSI_ATTEMPT_CONFIG_NVDATA),
1151 AttemptTmp
1152 );
1153
1154 continue;
1155
1156 } else {
1157 continue;
1158 }
1159 }
1160
1161 //
1162 // This attempt does not exist in AttemptConfig. Try to add a new one.
1163 //
1164
1165 NicInfo = IScsiGetNicInfoByIndex (mPrivate->CurrentNic);
1166 ASSERT (NicInfo != NULL);
1167 IScsiMacAddrToStr (&NicInfo->PermanentAddress, NicInfo->HwAddressSize, NicInfo->VlanId, MacString);
1168 UnicodeSPrint (
1169 mPrivate->PortString,
1170 (UINTN) 128,
1171 L"%s%d",
1172 MacString,
1173 (UINTN) AttemptConfigOrder[Index]
1174 );
1175
1176 GetVariable2 (
1177 mPrivate->PortString,
1178 &gEfiIScsiInitiatorNameProtocolGuid,
1179 (VOID**)&AttemptConfigData,
1180 NULL
1181 );
1182
1183 if (AttemptConfigData == NULL) {
1184 continue;
1185 }
1186
1187 ASSERT (AttemptConfigOrder[Index] == AttemptConfigData->AttemptConfigIndex);
1188
1189 AttemptConfigData->NicIndex = NicInfo->NicIndex;
1190 AttemptConfigData->DhcpSuccess = FALSE;
1191 AttemptConfigData->ValidiBFTPath = (BOOLEAN) (mPrivate->EnableMpio ? TRUE : FALSE);
1192 AttemptConfigData->ValidPath = FALSE;
1193
1194 if (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_AUTOCONFIG) {
1195 AttemptConfigData->SessionConfigData.InitiatorInfoFromDhcp = TRUE;
1196 AttemptConfigData->SessionConfigData.TargetInfoFromDhcp = TRUE;
1197
1198 AttemptConfigData->AutoConfigureMode =
1199 (UINT8) (mPrivate->Ipv6Flag ? IP_MODE_AUTOCONFIG_IP6 : IP_MODE_AUTOCONFIG_IP4);
1200 }
1201
1202 //
1203 // Get some information from dhcp server.
1204 //
1205 if (AttemptConfigData->SessionConfigData.Enabled != ISCSI_DISABLED &&
1206 AttemptConfigData->SessionConfigData.InitiatorInfoFromDhcp) {
1207
1208 if (!mPrivate->Ipv6Flag &&
1209 (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_IP4 ||
1210 AttemptConfigData->AutoConfigureMode == IP_MODE_AUTOCONFIG_IP4)) {
1211 Status = IScsiDoDhcp (Private->Image, Private->Controller, AttemptConfigData);
1212 if (!EFI_ERROR (Status)) {
1213 AttemptConfigData->DhcpSuccess = TRUE;
1214 }
1215 } else if (mPrivate->Ipv6Flag &&
1216 (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_IP6 ||
1217 AttemptConfigData->AutoConfigureMode == IP_MODE_AUTOCONFIG_IP6)) {
1218 Status = IScsiDoDhcp6 (Private->Image, Private->Controller, AttemptConfigData);
1219 if (!EFI_ERROR (Status)) {
1220 AttemptConfigData->DhcpSuccess = TRUE;
1221 }
1222 }
1223
1224 //
1225 // Refresh the state of this attempt to NVR.
1226 //
1227 AsciiStrToUnicodeStr (AttemptConfigData->MacString, MacString);
1228 UnicodeSPrint (
1229 mPrivate->PortString,
1230 (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
1231 L"%s%d",
1232 MacString,
1233 (UINTN) AttemptConfigData->AttemptConfigIndex
1234 );
1235
1236 gRT->SetVariable (
1237 mPrivate->PortString,
1238 &gEfiIScsiInitiatorNameProtocolGuid,
1239 ISCSI_CONFIG_VAR_ATTR,
1240 sizeof (ISCSI_ATTEMPT_CONFIG_NVDATA),
1241 AttemptConfigData
1242 );
1243 }
1244
1245 //
1246 // Update Attempt Help Info.
1247 //
1248
1249 if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_DISABLED) {
1250 UnicodeSPrint (IScsiMode, 64, L"Disabled");
1251 } else if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED) {
1252 UnicodeSPrint (IScsiMode, 64, L"Enabled");
1253 } else if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED_FOR_MPIO) {
1254 UnicodeSPrint (IScsiMode, 64, L"Enabled for MPIO");
1255 }
1256
1257 if (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_IP4) {
1258 UnicodeSPrint (IpMode, 64, L"IP4");
1259 } else if (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_IP6) {
1260 UnicodeSPrint (IpMode, 64, L"IP6");
1261 } else if (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_AUTOCONFIG) {
1262 UnicodeSPrint (IpMode, 64, L"Autoconfigure");
1263 }
1264
1265 UnicodeSPrint (
1266 mPrivate->PortString,
1267 (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
1268 L"MAC: %s, PFA: Bus %d | Dev %d | Func %d, iSCSI mode: %s, IP version: %s",
1269 MacString,
1270 NicInfo->BusNumber,
1271 NicInfo->DeviceNumber,
1272 NicInfo->FunctionNumber,
1273 IScsiMode,
1274 IpMode
1275 );
1276
1277 AttemptConfigData->AttemptTitleHelpToken = HiiSetString (
1278 mCallbackInfo->RegisteredHandle,
1279 0,
1280 mPrivate->PortString,
1281 NULL
1282 );
1283 ASSERT (AttemptConfigData->AttemptTitleHelpToken != 0);
1284
1285 //
1286 // Record the attempt in global link list.
1287 //
1288 InsertTailList (&mPrivate->AttemptConfigs, &AttemptConfigData->Link);
1289 mPrivate->AttemptCount++;
1290
1291 if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED_FOR_MPIO) {
1292 mPrivate->MpioCount++;
1293 mPrivate->EnableMpio = TRUE;
1294
1295 if (AttemptConfigData->AuthenticationType == ISCSI_AUTH_TYPE_KRB) {
1296 mPrivate->Krb5MpioCount++;
1297 }
1298 } else if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED) {
1299 mPrivate->SinglePathCount++;
1300 }
1301 }
1302
1303 //
1304 // Reorder the AttemptConfig by the configured order.
1305 //
1306 for (Index = 0; Index < AttemptConfigOrderSize / sizeof (UINT8); Index++) {
1307 AttemptConfigData = IScsiConfigGetAttemptByConfigIndex (AttemptConfigOrder[Index]);
1308 if (AttemptConfigData == NULL) {
1309 continue;
1310 }
1311
1312 RemoveEntryList (&AttemptConfigData->Link);
1313 InsertTailList (&mPrivate->AttemptConfigs, &AttemptConfigData->Link);
1314 }
1315
1316 //
1317 // Update the Main Form.
1318 //
1319 IScsiConfigUpdateAttempt ();
1320
1321 FreePool (AttemptConfigOrder);
1322
1323 //
1324 // There should be at least one attempt configuration.
1325 //
1326 if (!mPrivate->EnableMpio) {
1327 if (mPrivate->SinglePathCount == 0) {
1328 return EFI_NOT_FOUND;
1329 }
1330 mPrivate->ValidSinglePathCount = mPrivate->SinglePathCount;
1331 }
1332
1333 return EFI_SUCCESS;
1334}
1335
1336
1337/**
1338 Get the device path of the iSCSI tcp connection and update it.
1339
1340 @param Session The iSCSI session.
1341
1342 @return The updated device path.
1343 @retval NULL Other errors as indicated.
1344
1345**/
1346EFI_DEVICE_PATH_PROTOCOL *
1347IScsiGetTcpConnDevicePath (
1348 IN ISCSI_SESSION *Session
1349 )
1350{
1351 ISCSI_CONNECTION *Conn;
1352 EFI_DEVICE_PATH_PROTOCOL *DevicePath;
1353 EFI_STATUS Status;
1354 EFI_DEV_PATH *DPathNode;
1355
1356 if (Session->State != SESSION_STATE_LOGGED_IN) {
1357 return NULL;
1358 }
1359
1360 Conn = NET_LIST_USER_STRUCT_S (
1361 Session->Conns.ForwardLink,
1362 ISCSI_CONNECTION,
1363 Link,
1364 ISCSI_CONNECTION_SIGNATURE
1365 );
1366
1367 Status = gBS->HandleProtocol (
1368 Conn->TcpIo.Handle,
1369 &gEfiDevicePathProtocolGuid,
1370 (VOID **) &DevicePath
1371 );
1372 if (EFI_ERROR (Status)) {
1373 return NULL;
1374 }
1375 //
1376 // Duplicate it.
1377 //
1378 DevicePath = DuplicateDevicePath (DevicePath);
1379 if (DevicePath == NULL) {
1380 return NULL;
1381 }
1382
1383 DPathNode = (EFI_DEV_PATH *) DevicePath;
1384
1385 while (!IsDevicePathEnd (&DPathNode->DevPath)) {
1386 if (DevicePathType (&DPathNode->DevPath) == MESSAGING_DEVICE_PATH) {
1387 if (!Conn->Ipv6Flag && DevicePathSubType (&DPathNode->DevPath) == MSG_IPv4_DP) {
1388 DPathNode->Ipv4.LocalPort = 0;
1389
1390 DPathNode->Ipv4.StaticIpAddress =
1391 (BOOLEAN) (!Session->ConfigData->SessionConfigData.InitiatorInfoFromDhcp);
1392
1393 IP4_COPY_ADDRESS (
1394 &DPathNode->Ipv4.GatewayIpAddress,
1395 &Session->ConfigData->SessionConfigData.Gateway
1396 );
1397
1398 IP4_COPY_ADDRESS (
1399 &DPathNode->Ipv4.SubnetMask,
1400 &Session->ConfigData->SessionConfigData.SubnetMask
1401 );
1402 break;
1403 } else if (Conn->Ipv6Flag && DevicePathSubType (&DPathNode->DevPath) == MSG_IPv6_DP) {
1404 DPathNode->Ipv6.LocalPort = 0;
1405 DPathNode->Ipv6.IpAddressOrigin = 0;
1406 DPathNode->Ipv6.PrefixLength = IP6_PREFIX_LENGTH;
1407 ZeroMem (&DPathNode->Ipv6.GatewayIpAddress, sizeof (EFI_IPv6_ADDRESS));
1408 break;
1409 }
1410 }
1411
1412 DPathNode = (EFI_DEV_PATH *) NextDevicePathNode (&DPathNode->DevPath);
1413 }
1414
1415 return DevicePath;
1416}
1417
1418
1419/**
1420 Abort the session when the transition from BS to RT is initiated.
1421
1422 @param[in] Event The event signaled.
1423 @param[in] Context The iSCSI driver data.
1424
1425**/
1426VOID
1427EFIAPI
1428IScsiOnExitBootService (
1429 IN EFI_EVENT Event,
1430 IN VOID *Context
1431 )
1432{
1433 ISCSI_DRIVER_DATA *Private;
1434
1435 Private = (ISCSI_DRIVER_DATA *) Context;
1436 gBS->CloseEvent (Private->ExitBootServiceEvent);
1437
1438 if (Private->Session != NULL) {
1439 IScsiSessionAbort (Private->Session);
1440 }
1441}
1442
1443/**
1444 Tests whether a controller handle is being managed by IScsi driver.
1445
1446 This function tests whether the driver specified by DriverBindingHandle is
1447 currently managing the controller specified by ControllerHandle. This test
1448 is performed by evaluating if the the protocol specified by ProtocolGuid is
1449 present on ControllerHandle and is was opened by DriverBindingHandle and Nic
1450 Device handle with an attribute of EFI_OPEN_PROTOCOL_BY_DRIVER.
1451 If ProtocolGuid is NULL, then ASSERT().
1452
1453 @param ControllerHandle A handle for a controller to test.
1454 @param DriverBindingHandle Specifies the driver binding handle for the
1455 driver.
1456 @param ProtocolGuid Specifies the protocol that the driver specified
1457 by DriverBindingHandle opens in its Start()
1458 function.
1459
1460 @retval EFI_SUCCESS ControllerHandle is managed by the driver
1461 specified by DriverBindingHandle.
1462 @retval EFI_UNSUPPORTED ControllerHandle is not managed by the driver
1463 specified by DriverBindingHandle.
1464
1465**/
1466EFI_STATUS
1467EFIAPI
1468IScsiTestManagedDevice (
1469 IN EFI_HANDLE ControllerHandle,
1470 IN EFI_HANDLE DriverBindingHandle,
1471 IN EFI_GUID *ProtocolGuid
1472 )
1473{
1474 EFI_STATUS Status;
1475 VOID *ManagedInterface;
1476 EFI_HANDLE NicControllerHandle;
1477
1478 ASSERT (ProtocolGuid != NULL);
1479
1480 NicControllerHandle = NetLibGetNicHandle (ControllerHandle, ProtocolGuid);
1481 if (NicControllerHandle == NULL) {
1482 return EFI_UNSUPPORTED;
1483 }
1484
1485 Status = gBS->OpenProtocol (
1486 ControllerHandle,
1487 (EFI_GUID *) ProtocolGuid,
1488 &ManagedInterface,
1489 DriverBindingHandle,
1490 NicControllerHandle,
1491 EFI_OPEN_PROTOCOL_BY_DRIVER
1492 );
1493 if (!EFI_ERROR (Status)) {
1494 gBS->CloseProtocol (
1495 ControllerHandle,
1496 (EFI_GUID *) ProtocolGuid,
1497 DriverBindingHandle,
1498 NicControllerHandle
1499 );
1500 return EFI_UNSUPPORTED;
1501 }
1502
1503 if (Status != EFI_ALREADY_STARTED) {
1504 return EFI_UNSUPPORTED;
1505 }
1506
1507 return EFI_SUCCESS;
1508}
注意: 瀏覽 TracBrowser 來幫助您使用儲存庫瀏覽器

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette