vbe.c@ 68039

最後變更在這個檔案從68039是 67813,由 vboxsync 提交於 7 年前
VGABIOS: Fixed 15bpp virtual resolution calculations.
屬性 svn:eol-style 設為 `native` 屬性 svn:keywords 設為 `Author Date Id Revision`
檔案大小: 23.8 KB

行
1	// ============================================================================================
2	//
3	// Copyright (C) 2002 Jeroen Janssen
4	//
5	// This library is free software; you can redistribute it and/or
6	// modify it under the terms of the GNU Lesser General Public
7	// License as published by the Free Software Foundation; either
8	// version 2 of the License, or (at your option) any later version.
9	//
10	// This library is distributed in the hope that it will be useful,
11	// but WITHOUT ANY WARRANTY; without even the implied warranty of
12	// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13	// Lesser General Public License for more details.
14	//
15	// You should have received a copy of the GNU Lesser General Public
16	// License along with this library; if not, write to the Free Software
17	// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18	//
19	// ============================================================================================
20	//
21	// This VBE is part of the VGA Bios specific to the plex86/bochs Emulated VGA card.
22	// You can NOT drive any physical vga card with it.
23	//
24	// ============================================================================================
25	//
26	// This VBE Bios is based on information taken from :
27	// - VESA BIOS EXTENSION (VBE) Core Functions Standard Version 3.0 located at www.vesa.org
28	//
29	// ============================================================================================
30
31
32	/*
33	* Oracle LGPL Disclaimer: For the avoidance of doubt, except that if any license choice
34	* other than GPL or LGPL is available it will apply instead, Oracle elects to use only
35	* the Lesser General Public License version 2.1 (LGPLv2) at this time for any software where
36	* a choice of LGPL license versions is made available with the language indicating
37	* that LGPLv2 or any later version may be used, or where a choice of which version
38	* of the LGPL is applied is otherwise unspecified.
39	*/
40
41	// Use VBE new dynamic mode list. Note that without this option, no
42	// checks are currently done to make sure that modes fit into the
43	// framebuffer!
44	#define VBE_NEW_DYN_LIST
45
46	#include <inttypes.h>
47	#include <stddef.h>
48	#include "vbe.h"
49	#include "vgadefs.h"
50	#include "inlines.h"
51
52	// disable VESA/VBE2 check in vbe info
53	//#define VBE2_NO_VESA_CHECK
54
55	// use bytewise i/o (Longhorn beta issue, not in released Vista)
56	#define VBE_BYTEWISE_IO
57
58	#ifdef VBE_BYTEWISE_IO
59	extern void do_out_dx_ax();
60	#pragma aux do_out_dx_ax "*";
61	extern void out_w(uint16_t port, uint16_t value);
62	#pragma aux out_w = \
63	"call do_out_dx_ax" \
64	parm [dx] [ax] modify nomemory;
65	extern void do_in_ax_dx();
66	#pragma aux do_in_ax_dx "*";
67	extern uint16_t in_w(uint16_t port);
68	#pragma aux in_w = \
69	"call do_in_ax_dx" \
70	parm [dx] value [ax] modify nomemory;
71	#else
72	#define out_w outw
73	#define in_w inw
74	#endif
75
76
77	/* VESA signatures as integer constants. */
78	#define SIG_VBE2 0x32454256 /* 'VBE2' */
79	#define SIG_VESA 0x41534556 /* 'VESA' */
80
81
82	/* Implemented in assembler. */
83	extern void __cdecl vga_compat_setup(void);
84	extern void dispi_set_enable(uint16_t enable);
85	extern void dispi_set_bank(uint16_t bank);
86	extern uint16_t __cdecl dispi_get_max_bpp(void);
87	extern void __cdecl dispi_set_bank_farcall(void);
88
89	// The current OEM Software Revision of this VBE Bios
90	#define VBE_OEM_SOFTWARE_REV 0x0003
91
92	// FIXME: 'merge' these (c) etc strings with the vgabios.c strings?
93	char vbebios_copyright[] = "VirtualBox VESA BIOS";
94	char vbebios_vendor_name[] = VBOX_VENDOR;
95	char vbebios_product_name[] = VBOX_PRODUCT " VBE Adapter";
96	char vbebios_product_revision[] = VBOX_PRODUCT " Version " VBOX_VERSION_STRING;
97
98	char vbebios_info_string[] = "VirtualBox VBE Display Adapter enabled\r\n\r\n";
99	char no_vbebios_info_string[] = "No VirtualBox VBE support available!\r\n\r\n";
100
101	#ifdef VGA_DEBUG
102	char msg_vbe_init[] = "VirtualBox Version " VBOX_VERSION_STRING " VBE Display Adapter\r\n";
103	#endif
104
105	static void dispi_set_xres(uint16_t xres)
106	{
107	#ifdef VGA_DEBUG
108	printf("vbe_set_xres: %04x\n", xres);
109	#endif
110	out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_XRES);
111	out_w(VBE_DISPI_IOPORT_DATA, xres);
112	}
113
114	static void dispi_set_yres(uint16_t yres)
115	{
116	#ifdef VGA_DEBUG
117	printf("vbe_set_yres: %04x\n", yres);
118	#endif
119	out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_YRES);
120	out_w(VBE_DISPI_IOPORT_DATA, yres);
121	}
122
123	static uint16_t dispi_get_yres(void)
124	{
125	out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_YRES);
126	return in_w(VBE_DISPI_IOPORT_DATA);
127	}
128
129	static void dispi_set_bpp(uint16_t bpp)
130	{
131	#ifdef VGA_DEBUG
132	printf("vbe_set_bpp: %02x\n", bpp);
133	#endif
134	out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_BPP);
135	out_w(VBE_DISPI_IOPORT_DATA, bpp);
136	}
137
138	static uint16_t dispi_get_bpp(void)
139	{
140	out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_BPP);
141	return in_w(VBE_DISPI_IOPORT_DATA);
142	}
143
144	static void dispi_set_virt_width(uint16_t vwidth)
145	{
146	#ifdef VGA_DEBUG
147	printf("vbe_set_virt_width: %04x\n", vwidth);
148	#endif
149	out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_VIRT_WIDTH);
150	out_w(VBE_DISPI_IOPORT_DATA, vwidth);
151	}
152
153	static uint16_t dispi_get_virt_width(void)
154	{
155	out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_VIRT_WIDTH);
156	return in_w(VBE_DISPI_IOPORT_DATA);
157	}
158
159	static uint16_t dispi_get_virt_height(void)
160	{
161	out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_VIRT_HEIGHT);
162	return in_w(VBE_DISPI_IOPORT_DATA);
163	}
164
165	uint16_t in_word(uint16_t port, uint16_t addr)
166	{
167	outw(port, addr);
168	return inw(port);
169	}
170
171	#ifdef VBE_NEW_DYN_LIST
172	uint8_t in_byte(uint16_t port, uint16_t addr)
173	{
174	outw(port, addr);
175	return inb(port);
176	}
177	#endif
178
179	/* Display "chip" identification helpers. */
180	static uint16_t dispi_get_id(void)
181	{
182	outw(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_ID);
183	return inw(VBE_DISPI_IOPORT_DATA);
184	}
185
186	static void dispi_set_id(uint16_t chip_id)
187	{
188	outw(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_ID);
189	outw(VBE_DISPI_IOPORT_DATA, chip_id);
190	}
191
192	/* VBE Init - Initialise the VESA BIOS Extension (VBE) support
193	* This function does a sanity check on the host side display code interface.
194	*/
195	void vbe_init(void)
196	{
197	dispi_set_id(VBE_DISPI_ID0);
198	if (dispi_get_id() == VBE_DISPI_ID0) {
199	/* VBE support was detected. */
200	write_byte(BIOSMEM_SEG, BIOSMEM_VBE_FLAG, 1);
201	dispi_set_id(VBE_DISPI_ID4);
202	}
203	#ifdef DEBUG_VGA
204	printf(msg_vbe_init);
205	#endif
206	}
207
208	/* Find the offset of the desired mode, given its number. */
209	#ifdef VBE_NEW_DYN_LIST
210	static uint16_t mode_info_find_mode(uint16_t mode, Boolean using_lfb)
211	{
212	uint16_t sig, vmode, attrs;
213	uint16_t cur_info_ofs; /* Current offset in mode list. */
214
215	/* Read and check the VBE Extra Data signature. */
216	sig = in_word(VBE_EXTRA_PORT, 0);
217	if (sig != VBEHEADER_MAGIC) {
218	#ifdef DEBUG_VGA
219	printf("Signature NOT found! %x\n", sig);
220	#endif
221	return 0;
222	}
223
224	cur_info_ofs = sizeof(VBEHeader);
225
226	vmode = in_word(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, mode)/&cur_info->mode/);
227	while (vmode != VBE_VESA_MODE_END_OF_LIST)
228	{
229	attrs = in_word(VBE_EXTRA_PORT, /&cur_info->info.ModeAttributes/cur_info_ofs + offsetof(ModeInfoListItem, info.ModeAttributes) );
230
231	if (vmode == mode)
232	{
233	if (!using_lfb)
234	return cur_info_ofs;
235	else if (attrs & VBE_MODE_ATTRIBUTE_LINEAR_FRAME_BUFFER_MODE)
236	return cur_info_ofs;
237	else {
238	cur_info_ofs += sizeof(ModeInfoListItem);
239	vmode = in_word(VBE_EXTRA_PORT, /&cur_info->mode/cur_info_ofs + offsetof(ModeInfoListItem, mode));
240	}
241	} else {
242	cur_info_ofs += sizeof(ModeInfoListItem);
243	vmode = in_word(VBE_EXTRA_PORT, /&cur_info->mode/cur_info_ofs + offsetof(ModeInfoListItem, mode));
244	}
245	}
246	return 0;
247	}
248	#else
249	static ModeInfoListItem* mode_info_find_mode(uint16_t mode, Boolean using_lfb)
250	{
251	ModeInfoListItem *cur_info = &mode_info_list;
252
253	while (cur_info->mode != VBE_VESA_MODE_END_OF_LIST)
254	{
255	if (cur_info->mode == mode)
256	{
257	if (!using_lfb)
258	return cur_info;
259	else if (cur_info->info.ModeAttributes & VBE_MODE_ATTRIBUTE_LINEAR_FRAME_BUFFER_MODE)
260	return cur_info;
261	else
262	cur_info++;
263	} else
264	cur_info++;
265	}
266	return 0;
267	}
268	#endif
269
270	#ifndef VBOX
271	; VBE Display Info - Display information on screen about the VBE
272
273	vbe_display_info:
274	call _vbe_has_vbe_display
275	test ax, ax
276	jz no_vbe_flag
277	mov ax, #0xc000
278	mov ds, ax
279	mov si, #_vbebios_info_string
280	jmp _display_string
281	no_vbe_flag:
282	mov ax, #0xc000
283	mov ds, ax
284	mov si, #_no_vbebios_info_string
285	jmp _display_string
286	#endif
287
288	/** Function 00h - Return VBE Controller Information
289	*
290	* Input:
291	* AX = 4F00h
292	* ES:DI = Pointer to buffer in which to place VbeInfoBlock structure
293	* (VbeSignature should be VBE2 when VBE 2.0 information is desired and
294	* the info block is 512 bytes in size)
295	* Output:
296	* AX = VBE Return Status
297	*
298	*/
299	void vbe_biosfn_return_controller_information(uint16_t STACK_BASED *AX, uint16_t ES, uint16_t DI)
300	{
301	uint16_t status;
302	uint16_t vbe2_info;
303	uint16_t cur_mode = 0;
304	uint16_t cur_ptr=34;
305	#ifdef VBE_NEW_DYN_LIST
306	uint16_t cur_info_ofs;
307	uint16_t sig, vmode;
308	#else
309	ModeInfoListItem *cur_info = &mode_info_list;
310	#endif
311	uint16_t max_bpp = dispi_get_max_bpp();
312	VbeInfoBlock __far *info_block;
313
314	info_block = ES :> (VbeInfoBlock *)DI;
315
316	#ifdef VBE_NEW_DYN_LIST
317	/* Read VBE Extra Data signature */
318	sig = in_word(VBE_EXTRA_PORT, 0);
319	if (sig != VBEHEADER_MAGIC)
320	{
321	*AX = 0x0100;
322	#ifdef DEBUG_VGA
323	printf("Signature NOT found\n");
324	#endif
325	return;
326	}
327	cur_info_ofs = sizeof(VBEHeader);
328	#endif
329	status = *AX;
330
331	#ifdef VGA_DEBUG
332	printf("VBE vbe_biosfn_return_vbe_info ES%x DI%x AX%x\n",ES,DI,status);
333	#endif
334
335	vbe2_info = 0;
336
337	/* Don't use a local copy of VbeInfoBlock on the stack; it's too big.
338	* The Ubuntu 8.04 64 bits splash screen emulator can't handle this.
339	*/
340	#ifdef VBE2_NO_VESA_CHECK
341	#else /* !VBE2_NO_VESA_CHECK */
342	// check for VBE2 signature
343	if (info_block->VbeSignature.Sig32 == SIG_VBE2 \|\| info_block->VbeSignature.Sig32 == SIG_VESA)
344	{
345	vbe2_info = 1;
346	#ifdef VGA_DEBUG
347	printf("VBE correct VESA/VBE2 signature found\n");
348	#endif
349	}
350	#endif /* !VBE2_NO_VESA_CHECK */
351
352	/* VBE Signature - the compiler will optimize this into something sane. */
353	info_block->VbeSignature.SigChr[0] = 'V';
354	info_block->VbeSignature.SigChr[1] = 'E';
355	info_block->VbeSignature.SigChr[2] = 'S';
356	info_block->VbeSignature.SigChr[3] = 'A';
357
358	/* VBE Version supported. */
359	info_block->VbeVersion = 0x0200; /* Version 2.0. */
360
361	/* OEM String. */
362	info_block->OemString.Ptr = &vbebios_copyright;
363
364	/* Capabilities if this implementation. */
365	info_block->Capabilities[0] = VBE_CAPABILITY_8BIT_DAC;
366	info_block->Capabilities[1] = 0;
367	info_block->Capabilities[2] = 0;
368	info_block->Capabilities[3] = 0;
369
370	/* Video mode list pointer (dynamically generated). */
371	info_block->VideoModePtr_Seg = ES;
372	info_block->VideoModePtr_Off = DI + 34;
373
374	/* Total controller memory in 64K units. */
375	info_block->TotalMemory = in_word(VBE_EXTRA_PORT, 0xffff);
376
377	if (vbe2_info)
378	{
379	/* OEM information. */
380	info_block->OemSoftwareRev = VBE_OEM_SOFTWARE_REV;
381	info_block->OemVendorName.Ptr = &vbebios_vendor_name;
382	info_block->OemProductName.Ptr = &vbebios_product_name;
383	info_block->OemProductRev.Ptr = &vbebios_product_revision;
384	}
385
386	#ifdef VBE_NEW_DYN_LIST
387	do
388	{
389	uint8_t data_b;
390
391	data_b = in_byte(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, info.BitsPerPixel) /&cur_info->info.BitsPerPixel/);
392	if (data_b <= max_bpp)
393	{
394	vmode = in_word(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, mode)/&cur_info->mode/);
395	#ifdef VGA_DEBUG
396	printf("VBE found mode %x => %x\n", vmode, cur_mode);
397	#endif
398	write_word(ES, DI + cur_ptr, vmode);
399	cur_mode++;
400	cur_ptr+=2;
401	}
402	cur_info_ofs += sizeof(ModeInfoListItem);
403	vmode = in_word(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, mode)/&cur_info->mode/);
404	} while (vmode != VBE_VESA_MODE_END_OF_LIST);
405
406	// Add vesa mode list terminator
407	write_word(ES, DI + cur_ptr, vmode);
408	#else
409	do
410	{
411	if (cur_info->info.BitsPerPixel <= max_bpp) {
412	#ifdef VGA_DEBUG
413	printf("VBE found mode %x => %x\n", cur_info->mode,cur_mode);
414	#endif
415	write_word(ES, DI + cur_ptr, cur_info->mode);
416	cur_mode++;
417	cur_ptr += 2;
418	}
419	cur_info++;
420	} while (cur_info->mode != VBE_VESA_MODE_END_OF_LIST);
421
422	// Add vesa mode list terminator
423	write_word(ES, DI + cur_ptr, cur_info->mode);
424	#endif // VBE_NEW_DYN_LIST
425	*AX = 0x004F;
426	}
427
428	/** Function 01h - Return VBE Mode Information
429	*
430	* Input:
431	* AX = 4F01h
432	* CX = Mode Number
433	* ES:DI = Pointer to buffer in which to place ModeInfoBlock structure
434	* Output:
435	* AX = VBE Return Status
436	*
437	*/
438	void vbe_biosfn_return_mode_information(uint16_t STACK_BASED *AX, uint16_t CX, uint16_t ES, uint16_t DI)
439	{
440	uint16_t result = 0x0100;
441	#ifdef VBE_NEW_DYN_LIST
442	uint16_t cur_info_ofs;
443	#else
444	ModeInfoListItem *cur_info;
445	#endif
446	Boolean using_lfb;
447	uint8_t win_attr;
448
449	#ifdef VGA_DEBUG
450	printf("VBE vbe_biosfn_return_mode_information ES%x DI%x CX%x\n",ES,DI,CX);
451	#endif
452
453	using_lfb = ((CX & VBE_MODE_LINEAR_FRAME_BUFFER) == VBE_MODE_LINEAR_FRAME_BUFFER);
454	CX = (CX & 0x1ff);
455
456	#ifdef VBE_NEW_DYN_LIST
457	cur_info_ofs = mode_info_find_mode(CX, using_lfb);
458
459	if (cur_info_ofs) {
460	uint16_t i;
461	#else
462	cur_info = mode_info_find_mode(CX, using_lfb);
463
464	if (cur_info != 0) {
465	#endif
466	#ifdef VGA_DEBUG
467	printf("VBE found mode %x\n",CX);
468	#endif
469	memsetb(ES, DI, 0, 256); // The mode info size is fixed
470	#ifdef VBE_NEW_DYN_LIST
471	for (i = 0; i < sizeof(ModeInfoBlockCompact); i++) {
472	uint8_t b;
473
474	b = in_byte(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, info) + i/(char )(&(cur_info->info)) + i*/);
475	write_byte(ES, DI + i, b);
476	}
477	#else
478	memcpyb(ES, DI, 0xc000, &(cur_info->info), sizeof(ModeInfoBlockCompact));
479	#endif
480	win_attr = read_byte(ES, DI + offsetof(ModeInfoBlock, WinAAttributes));
481	if (win_attr & VBE_WINDOW_ATTRIBUTE_RELOCATABLE) {
482	write_word(ES, DI + offsetof(ModeInfoBlock, WinFuncPtr), (uint16_t)(dispi_set_bank_farcall));
483	// If BIOS not at 0xC000 -> boom
484	write_word(ES, DI + offsetof(ModeInfoBlock, WinFuncPtr) + 2, 0xC000);
485	}
486	// Update the LFB physical address which may change at runtime
487	out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_FB_BASE_HI);
488	write_word(ES, DI + offsetof(ModeInfoBlock, PhysBasePtr) + 2, in_w(VBE_DISPI_IOPORT_DATA));
489
490	result = 0x4f;
491	} else {
492	#ifdef VGA_DEBUG
493	printf("VBE NOT found mode %x\n",CX);
494	#endif
495	result = 0x100;
496	}
497
498	*AX = result;
499	}
500
501	/** Function 02h - Set VBE Mode
502	*
503	* Input:
504	* AX = 4F02h
505	* BX = Desired Mode to set
506	* ES:DI = Pointer to CRTCInfoBlock structure
507	* Output:
508	* AX = VBE Return Status
509	*
510	*/
511	void vbe_biosfn_set_mode(uint16_t STACK_BASED *AX, uint16_t BX, uint16_t ES, uint16_t DI)
512	{
513	uint16_t result;
514	#ifdef VBE_NEW_DYN_LIST
515	uint16_t cur_info_ofs;
516	#else
517	ModeInfoListItem *cur_info;
518	#endif
519	Boolean using_lfb;
520	uint8_t no_clear;
521	uint8_t lfb_flag;
522
523	using_lfb = ((BX & VBE_MODE_LINEAR_FRAME_BUFFER) == VBE_MODE_LINEAR_FRAME_BUFFER);
524	lfb_flag = using_lfb ? VBE_DISPI_LFB_ENABLED : 0;
525	no_clear = ((BX & VBE_MODE_PRESERVE_DISPLAY_MEMORY) == VBE_MODE_PRESERVE_DISPLAY_MEMORY) ? VBE_DISPI_NOCLEARMEM : 0;
526
527	BX = (BX & 0x1ff);
528
529	// check for non vesa mode
530	if (BX < VBE_MODE_VESA_DEFINED)
531	{
532	uint8_t mode;
533
534	dispi_set_enable(VBE_DISPI_DISABLED);
535	// call the vgabios in order to set the video mode
536	// this allows for going back to textmode with a VBE call (some applications expect that to work)
537	mode = (BX & 0xff);
538	biosfn_set_video_mode(mode);
539	result = 0x4f;
540	goto leave;
541	}
542
543	#ifdef VBE_NEW_DYN_LIST
544	cur_info_ofs = mode_info_find_mode(BX, using_lfb);
545
546	if (cur_info_ofs != 0)
547	{
548	uint16_t xres, yres;
549	uint8_t bpp;
550
551	xres = in_word(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, info.XResolution) /&cur_info->info.XResolution/);
552	yres = in_word(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, info.YResolution) /&cur_info->info.YResolution/);
553	bpp = in_byte(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, info.BitsPerPixel) /&cur_info->info.BitsPerPixel/);
554
555	#ifdef VGA_DEBUG
556	printf("VBE found mode %x, setting:\n", BX);
557	printf("\txres%x yres%x bpp%x\n", xres, yres, bpp);
558	#endif
559	#else
560	cur_info = mode_info_find_mode(BX, using_lfb);
561
562	if (cur_info != 0)
563	{
564	#ifdef VGA_DEBUG
565	printf("VBE found mode %x, setting:\n", BX);
566	printf("\txres%x yres%x bpp%x\n",
567	cur_info->info.XResolution,
568	cur_info->info.YResolution,
569	cur_info->info.BitsPerPixel);
570	#endif
571	#endif // VBE_NEW_DYN_LIST
572
573	// first disable current mode (when switching between vesa modi)
574	dispi_set_enable(VBE_DISPI_DISABLED);
575
576	#ifdef VBE_NEW_DYN_LIST
577	if (bpp == 4)
578	#else
579	if (cur_info->info.BitsPerPixel == 4)
580	#endif
581	{
582	biosfn_set_video_mode(0x6a);
583	}
584
585	#ifdef VBE_NEW_DYN_LIST
586	dispi_set_bpp(bpp);
587	dispi_set_xres(xres);
588	dispi_set_yres(yres);
589	#else
590	dispi_set_bpp(cur_info->info.BitsPerPixel);
591	dispi_set_xres(cur_info->info.XResolution);
592	dispi_set_yres(cur_info->info.YResolution);
593	#endif
594	dispi_set_bank(0);
595	dispi_set_enable(VBE_DISPI_ENABLED \| no_clear \| lfb_flag);
596	vga_compat_setup();
597
598	write_word(BIOSMEM_SEG,BIOSMEM_VBE_MODE,BX);
599	write_byte(BIOSMEM_SEG,BIOSMEM_VIDEO_CTL,(0x60 \| no_clear));
600
601	result = 0x4f;
602	}
603	else
604	{
605	#ifdef VGA_DEBUG
606	printf("VBE NOT found mode %x\n" , BX);
607	#endif
608	result = 0x100;
609	}
610
611	leave:
612	*AX = result;
613	}
614
615	uint16_t vbe_biosfn_read_video_state_size(void)
616	{
617	return 9 * 2;
618	}
619
620	void vbe_biosfn_save_video_state(uint16_t ES, uint16_t BX)
621	{
622	uint16_t enable, i;
623
624	outw(VBE_DISPI_IOPORT_INDEX,VBE_DISPI_INDEX_ENABLE);
625	enable = inw(VBE_DISPI_IOPORT_DATA);
626	write_word(ES, BX, enable);
627	BX += 2;
628	if (!(enable & VBE_DISPI_ENABLED))
629	return;
630	for(i = VBE_DISPI_INDEX_XRES; i <= VBE_DISPI_INDEX_Y_OFFSET; i++) {
631	if (i != VBE_DISPI_INDEX_ENABLE) {
632	outw(VBE_DISPI_IOPORT_INDEX, i);
633	write_word(ES, BX, inw(VBE_DISPI_IOPORT_DATA));
634	BX += 2;
635	}
636	}
637	}
638
639
640	void vbe_biosfn_restore_video_state(uint16_t ES, uint16_t BX)
641	{
642	uint16_t enable, i;
643
644	enable = read_word(ES, BX);
645	BX += 2;
646
647	if (!(enable & VBE_DISPI_ENABLED)) {
648	outw(VBE_DISPI_IOPORT_INDEX,VBE_DISPI_INDEX_ENABLE);
649	outw(VBE_DISPI_IOPORT_DATA, enable);
650	} else {
651	outw(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_XRES);
652	outw(VBE_DISPI_IOPORT_DATA, read_word(ES, BX));
653	BX += 2;
654	outw(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_YRES);
655	outw(VBE_DISPI_IOPORT_DATA, read_word(ES, BX));
656	BX += 2;
657	outw(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_BPP);
658	outw(VBE_DISPI_IOPORT_DATA, read_word(ES, BX));
659	BX += 2;
660	outw(VBE_DISPI_IOPORT_INDEX,VBE_DISPI_INDEX_ENABLE);
661	outw(VBE_DISPI_IOPORT_DATA, enable);
662
663	for(i = VBE_DISPI_INDEX_BANK; i <= VBE_DISPI_INDEX_Y_OFFSET; i++) {
664	outw(VBE_DISPI_IOPORT_INDEX, i);
665	outw(VBE_DISPI_IOPORT_DATA, read_word(ES, BX));
666	BX += 2;
667	}
668	}
669	}
670
671	/** Function 04h - Save/Restore State
672	*
673	* Input:
674	* AX = 4F04h
675	* DL = 00h Return Save/Restore State buffer size
676	* 01h Save State
677	* 02h Restore State
678	* CX = Requested states
679	* ES:BX = Pointer to buffer (if DL <> 00h)
680	* Output:
681	* AX = VBE Return Status
682	* BX = Number of 64-byte blocks to hold the state buffer (if DL=00h)
683	*
684	*/
685	void vbe_biosfn_save_restore_state(uint16_t STACK_BASED *AX, uint16_t CX, uint16_t DX,
686	uint16_t ES, uint16_t STACK_BASED *BX)
687	{
688	uint16_t result, val;
689
690	result = 0x004F;
691	switch(GET_DL()) {
692	case 0x00:
693	val = biosfn_read_video_state_size2(CX);
694	#ifdef VGA_DEBUG
695	printf("VGA state size=%x\n", val);
696	#endif
697	if (CX & 8)
698	val += vbe_biosfn_read_video_state_size();
699	*BX = (val + 63) / 64;
700	break;
701	case 0x01:
702	val = *BX;
703	val = biosfn_save_video_state(CX, ES, val);
704	#ifdef VGA_DEBUG
705	printf("VGA save_state offset=%x\n", val);
706	#endif
707	if (CX & 8)
708	vbe_biosfn_save_video_state(ES, val);
709	break;
710	case 0x02:
711	val = *BX;
712	val = biosfn_restore_video_state(CX, ES, val);
713	#ifdef VGA_DEBUG
714	printf("VGA restore_state offset=%x\n", val);
715	#endif
716	if (CX & 8)
717	vbe_biosfn_restore_video_state(ES, val);
718	break;
719	default:
720	// function failed
721	result = 0x100;
722	break;
723	}
724	*AX = result;
725	}
726
727	/** Function 06h - Set/Get Logical Scan Line Length
728	*
729	* Input:
730	* AX = 4F06h
731	* BL = 00h Set Scan Line Length in Pixels
732	* = 01h Get Scan Line Length
733	* = 02h Set Scan Line Length in Bytes
734	* = 03h Get Maximum Scan Line Length
735	* CX = If BL=00h Desired Width in Pixels
736	* If BL=02h Desired Width in Bytes
737	* (Ignored for Get Functions)
738	*
739	* Output:
740	* AX = VBE Return Status
741	* BX = Bytes Per Scan Line
742	* CX = Actual Pixels Per Scan Line (truncated to
743	* nearest complete pixel)
744	* DX = Maximum Number of Scan Lines
745	*/
746	void vbe_biosfn_get_set_scanline_length(uint16_t STACK_BASED AX, uint16_t STACK_BASED BX,
747	uint16_t STACK_BASED CX, uint16_t STACK_BASED DX)
748	{
749	uint16_t val;
750	uint16_t result;
751	uint8_t bpp;
752	uint8_t subfn;
753	uint16_t old_vw;
754
755	bpp = dispi_get_bpp();
756	bpp = bpp == 15 ? 16 : bpp;
757	old_vw = dispi_get_virt_width();
758	result = 0x004F;
759	val = *CX;
760	subfn = *BX & 0xFF;
761	#ifdef VGA_DEBUG
762	printf("VBE get/set scanline len fn=%x, CX=%x\n", subfn, *CX);
763	#endif
764	switch(subfn) {
765	case 0x02:
766	if (bpp == 4)
767	val = val * 8;
768	else
769	val = val / (bpp / 8);
770	/* fall through */
771	case 0x00:
772	dispi_set_virt_width(val);
773	/* fall through */
774	case 0x01:
775	val = dispi_get_virt_width();
776	CX = val; / Width in pixels. */
777	if (bpp == 4)
778	val = val / 8;
779	else
780	val = val * (bpp / 8);
781	val = (val + 3) & ~3;
782	BX = val; / Bytes per scanline. */
783	DX = dispi_get_virt_height(); / Height in lines. */
784	if (*DX < dispi_get_yres()) {
785	dispi_set_virt_width(old_vw);
786	result = 0x200;
787	}
788	break;
789	default:
790	// function failed
791	result = 0x100;
792	break;
793	}
794	*AX = result;
795	}

注意: 瀏覽 TracBrowser 來幫助您使用儲存庫瀏覽器

source: vbox/trunk/src/VBox/Devices/Graphics/BIOS/vbe.c@ 68039

以其他格式下載: