/* $Id: DevPS2.cpp 26572 2010-02-16 12:42:17Z vboxsync $ */ /** @file * DevPS2 - PS/2 keyboard & mouse controller device. */ /* * Copyright (C) 2006-2007 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. * -------------------------------------------------------------------- * * This code is based on: * * QEMU PC keyboard emulation (revision 1.12) * * Copyright (c) 2003 Fabrice Bellard * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. * */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_KBD #include "vl_vbox.h" #include #include #include #include "../Builtins.h" #define PCKBD_SAVED_STATE_VERSION 3 #ifndef VBOX_DEVICE_STRUCT_TESTCASE /******************************************************************************* * Internal Functions * *******************************************************************************/ RT_C_DECLS_BEGIN PDMBOTHCBDECL(int) kbdIOPortDataRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); PDMBOTHCBDECL(int) kbdIOPortDataWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); PDMBOTHCBDECL(int) kbdIOPortStatusRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); PDMBOTHCBDECL(int) kbdIOPortCommandWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); RT_C_DECLS_END #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */ /* debug PC keyboard */ #define DEBUG_KBD /* debug PC keyboard : only mouse */ #define DEBUG_MOUSE /* Keyboard Controller Commands */ #define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */ #define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */ #define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */ #define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */ #define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */ #define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */ #define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */ #define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */ #define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */ #define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */ #define KBD_CCMD_READ_INPORT 0xC0 /* read input port */ #define KBD_CCMD_READ_OUTPORT 0xD0 /* read output port */ #define KBD_CCMD_WRITE_OUTPORT 0xD1 /* write output port */ #define KBD_CCMD_WRITE_OBUF 0xD2 #define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if initiated by the auxiliary device */ #define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */ #define KBD_CCMD_DISABLE_A20 0xDD /* HP vectra only ? */ #define KBD_CCMD_ENABLE_A20 0xDF /* HP vectra only ? */ #define KBD_CCMD_READ_TSTINP 0xE0 /* Read test inputs T0, T1 */ #define KBD_CCMD_RESET 0xFE /* Keyboard Commands */ #define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ #define KBD_CMD_ECHO 0xEE #define KBD_CMD_SCANCODE 0xF0 /* Get/set scancode set */ #define KBD_CMD_GET_ID 0xF2 /* get keyboard ID */ #define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ #define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ #define KBD_CMD_RESET_DISABLE 0xF5 /* reset and disable scanning */ #define KBD_CMD_RESET_ENABLE 0xF6 /* reset and enable scanning */ #define KBD_CMD_RESET 0xFF /* Reset */ /* Keyboard Replies */ #define KBD_REPLY_POR 0xAA /* Power on reset */ #define KBD_REPLY_ACK 0xFA /* Command ACK */ #define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ /* Status Register Bits */ #define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ #define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ #define KBD_STAT_SELFTEST 0x04 /* Self test successful */ #define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */ #define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */ #define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ #define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */ #define KBD_STAT_PERR 0x80 /* Parity error */ /* Controller Mode Register Bits */ #define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */ #define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */ #define KBD_MODE_SYS 0x04 /* The system flag (?) */ #define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */ #define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */ #define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */ #define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */ #define KBD_MODE_RFU 0x80 /* Mouse Commands */ #define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */ #define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */ #define AUX_SET_RES 0xE8 /* Set resolution */ #define AUX_GET_SCALE 0xE9 /* Get scaling factor */ #define AUX_SET_STREAM 0xEA /* Set stream mode */ #define AUX_POLL 0xEB /* Poll */ #define AUX_RESET_WRAP 0xEC /* Reset wrap mode */ #define AUX_SET_WRAP 0xEE /* Set wrap mode */ #define AUX_SET_REMOTE 0xF0 /* Set remote mode */ #define AUX_GET_TYPE 0xF2 /* Get type */ #define AUX_SET_SAMPLE 0xF3 /* Set sample rate */ #define AUX_ENABLE_DEV 0xF4 /* Enable aux device */ #define AUX_DISABLE_DEV 0xF5 /* Disable aux device */ #define AUX_SET_DEFAULT 0xF6 #define AUX_RESET 0xFF /* Reset aux device */ #define AUX_ACK 0xFA /* Command byte ACK. */ #define AUX_NACK 0xFE /* Command byte NACK. */ #define MOUSE_STATUS_REMOTE 0x40 #define MOUSE_STATUS_ENABLED 0x20 #define MOUSE_STATUS_SCALE21 0x10 #define KBD_QUEUE_SIZE 256 # define MOUSE_REPORT_HORIZONTAL 0x01 # define MOUSE_OUTSTANDING_CLICK 0x02 typedef struct { uint8_t data[KBD_QUEUE_SIZE]; int rptr, wptr, count; } KBDQueue; #define MOUSE_CMD_QUEUE_SIZE 8 typedef struct { uint8_t data[MOUSE_CMD_QUEUE_SIZE]; int rptr, wptr, count; } MouseCmdQueue; #define MOUSE_EVENT_QUEUE_SIZE 256 typedef struct { uint8_t data[MOUSE_EVENT_QUEUE_SIZE]; int rptr, wptr, count; } MouseEventQueue; typedef struct KBDState { KBDQueue queue; MouseCmdQueue mouse_command_queue; MouseEventQueue mouse_event_queue; uint8_t write_cmd; /* if non zero, write data to port 60 is expected */ uint8_t status; uint8_t mode; /* keyboard state */ int32_t kbd_write_cmd; int32_t scan_enabled; int32_t translate; int32_t scancode_set; /* 1=XT, 2=AT, 3=PS/2 */ /* mouse state */ int32_t mouse_write_cmd; uint8_t mouse_status; uint8_t mouse_resolution; uint8_t mouse_sample_rate; uint8_t mouse_wrap; uint8_t mouse_type; /* 0 = PS2, 3 = IMPS/2, 4 = IMEX */ uint8_t mouse_detect_state; int32_t mouse_dx; /* current values, needed for 'poll' mode */ int32_t mouse_dy; int32_t mouse_dz; int32_t mouse_dw; int32_t mouse_flags; uint8_t mouse_buttons; /** Pointer to the device instance - RC. */ PPDMDEVINSRC pDevInsRC; /** Pointer to the device instance - R3 . */ PPDMDEVINSR3 pDevInsR3; /** Pointer to the device instance. */ PPDMDEVINSR0 pDevInsR0; /** Critical section protecting the state. */ PDMCRITSECT CritSect; /** * Keyboard port - LUN#0. * * @implements PDMIBASE * @implements PDMIKEYBOARDPORT */ struct { /** The base interface for the keyboard port. */ PDMIBASE IBase; /** The keyboard port base interface. */ PDMIKEYBOARDPORT IPort; /** The base interface of the attached keyboard driver. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** The keyboard interface of the attached keyboard driver. */ R3PTRTYPE(PPDMIKEYBOARDCONNECTOR) pDrv; } Keyboard; /** * Mouse port - LUN#1. * * @implements PDMIBASE * @implements PDMIMOUSEPORT */ struct { /** The base interface for the mouse port. */ PDMIBASE IBase; /** The mouse port base interface. */ PDMIMOUSEPORT IPort; /** The base interface of the attached mouse driver. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** The mouse interface of the attached mouse driver. */ R3PTRTYPE(PPDMIMOUSECONNECTOR) pDrv; } Mouse; } KBDState; /* Table to convert from PC scancodes to raw scancodes. */ static const unsigned char ps2_raw_keycode[128] = { 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13, 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27, 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42, 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3, 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105, 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63, 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111, 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110 }; #ifndef VBOX_DEVICE_STRUCT_TESTCASE /* update irq and KBD_STAT_[MOUSE_]OBF */ /* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be incorrect, but it avoids having to simulate exact delays */ static void kbd_update_irq(KBDState *s) { KBDQueue *q = &s->queue; MouseCmdQueue *mcq = &s->mouse_command_queue; MouseEventQueue *meq = &s->mouse_event_queue; int irq12_level, irq1_level; irq1_level = 0; irq12_level = 0; s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF); if (q->count != 0) { s->status |= KBD_STAT_OBF; if ((s->mode & KBD_MODE_KBD_INT) && !(s->mode & KBD_MODE_DISABLE_KBD)) irq1_level = 1; } else if (mcq->count != 0 || meq->count != 0) { s->status |= KBD_STAT_OBF | KBD_STAT_MOUSE_OBF; if (s->mode & KBD_MODE_MOUSE_INT) irq12_level = 1; } PDMDevHlpISASetIrq(s->CTX_SUFF(pDevIns), 1, irq1_level); PDMDevHlpISASetIrq(s->CTX_SUFF(pDevIns), 12, irq12_level); } static void kbd_queue(KBDState *s, int b, int aux) { KBDQueue *q = &s->queue; MouseCmdQueue *mcq = &s->mouse_command_queue; MouseEventQueue *meq = &s->mouse_event_queue; #if defined(DEBUG_MOUSE) || defined(DEBUG_KBD) if (aux == 1) LogRel3(("%s: mouse command response: 0x%02x\n", __PRETTY_FUNCTION__, b)); else if (aux == 2) LogRel3(("%s: mouse event data: 0x%02x\n", __PRETTY_FUNCTION__, b)); #ifdef DEBUG_KBD else LogRel3(("%s: kbd event: 0x%02x\n", __PRETTY_FUNCTION__, b)); #endif #endif switch (aux) { case 0: /* keyboard */ if (q->count >= KBD_QUEUE_SIZE) return; q->data[q->wptr] = b; if (++q->wptr == KBD_QUEUE_SIZE) q->wptr = 0; q->count++; break; case 1: /* mouse command response */ if (mcq->count >= MOUSE_CMD_QUEUE_SIZE) return; mcq->data[mcq->wptr] = b; if (++mcq->wptr == MOUSE_CMD_QUEUE_SIZE) mcq->wptr = 0; mcq->count++; break; case 2: /* mouse event data */ if (meq->count >= MOUSE_EVENT_QUEUE_SIZE) return; meq->data[meq->wptr] = b; if (++meq->wptr == MOUSE_EVENT_QUEUE_SIZE) meq->wptr = 0; meq->count++; break; default: AssertMsgFailed(("aux=%d\n", aux)); } kbd_update_irq(s); } #ifdef IN_RING3 static void pc_kbd_put_keycode(void *opaque, int keycode) { KBDState *s = (KBDState*)opaque; /* XXX: add support for scancode sets 1 and 3 */ if (!s->translate && keycode < 0xe0 && s->scancode_set == 2) { if (keycode & 0x80) kbd_queue(s, 0xf0, 0); keycode = ps2_raw_keycode[keycode & 0x7f]; } kbd_queue(s, keycode, 0); } #endif /* IN_RING3 */ static uint32_t kbd_read_status(void *opaque, uint32_t addr) { KBDState *s = (KBDState*)opaque; int val; val = s->status; #if defined(DEBUG_KBD) Log(("kbd: read status=0x%02x\n", val)); #endif return val; } static int kbd_write_command(void *opaque, uint32_t addr, uint32_t val) { int rc = VINF_SUCCESS; KBDState *s = (KBDState*)opaque; #ifdef DEBUG_KBD Log(("kbd: write cmd=0x%02x\n", val)); #endif switch(val) { case KBD_CCMD_READ_MODE: kbd_queue(s, s->mode, 0); break; case KBD_CCMD_WRITE_MODE: case KBD_CCMD_WRITE_OBUF: case KBD_CCMD_WRITE_AUX_OBUF: case KBD_CCMD_WRITE_MOUSE: case KBD_CCMD_WRITE_OUTPORT: s->write_cmd = val; break; case KBD_CCMD_MOUSE_DISABLE: s->mode |= KBD_MODE_DISABLE_MOUSE; break; case KBD_CCMD_MOUSE_ENABLE: s->mode &= ~KBD_MODE_DISABLE_MOUSE; break; case KBD_CCMD_TEST_MOUSE: kbd_queue(s, 0x00, 0); break; case KBD_CCMD_SELF_TEST: s->status |= KBD_STAT_SELFTEST; kbd_queue(s, 0x55, 0); break; case KBD_CCMD_KBD_TEST: kbd_queue(s, 0x00, 0); break; case KBD_CCMD_KBD_DISABLE: s->mode |= KBD_MODE_DISABLE_KBD; kbd_update_irq(s); break; case KBD_CCMD_KBD_ENABLE: s->mode &= ~KBD_MODE_DISABLE_KBD; kbd_update_irq(s); break; case KBD_CCMD_READ_INPORT: kbd_queue(s, 0x00, 0); break; case KBD_CCMD_READ_OUTPORT: /* XXX: check that */ #ifdef TARGET_I386 val = 0x01 | (PDMDevHlpA20IsEnabled(s->CTX_SUFF(pDevIns)) << 1); #else val = 0x01; #endif if (s->status & KBD_STAT_OBF) val |= 0x10; if (s->status & KBD_STAT_MOUSE_OBF) val |= 0x20; kbd_queue(s, val, 0); break; #ifdef TARGET_I386 case KBD_CCMD_ENABLE_A20: # ifndef IN_RING3 if (!PDMDevHlpA20IsEnabled(s->CTX_SUFF(pDevIns))) rc = VINF_IOM_HC_IOPORT_WRITE; # else /* IN_RING3 */ PDMDevHlpA20Set(s->CTX_SUFF(pDevIns), true); # endif /* IN_RING3 */ break; case KBD_CCMD_DISABLE_A20: # ifndef IN_RING3 if (PDMDevHlpA20IsEnabled(s->CTX_SUFF(pDevIns))) rc = VINF_IOM_HC_IOPORT_WRITE; # else /* IN_RING3 */ PDMDevHlpA20Set(s->CTX_SUFF(pDevIns), false); # endif /* !IN_RING3 */ break; #endif case KBD_CCMD_READ_TSTINP: /* Keyboard clock line is zero IFF keyboard is disabled */ val = (s->mode & KBD_MODE_DISABLE_KBD) ? 0 : 1; kbd_queue(s, val, 0); break; case KBD_CCMD_RESET: #ifndef IN_RING3 rc = VINF_IOM_HC_IOPORT_WRITE; #else /* IN_RING3 */ rc = PDMDevHlpVMReset(s->CTX_SUFF(pDevIns)); #endif /* !IN_RING3 */ break; case 0xff: /* ignore that - I don't know what is its use */ break; /* Make OS/2 happy. */ /* The 8042 RAM is readble using commands 0x20 thru 0x3f, and writable by 0x60 thru 0x7f. Now days only the firs byte, the mode, is used. We'll ignore the writes (0x61..7f) and return 0 for all the reads just to make some OS/2 debug stuff a bit happier. */ case 0x21: case 0x22: case 0x23: case 0x24: case 0x25: case 0x26: case 0x27: case 0x28: case 0x29: case 0x2a: case 0x2b: case 0x2c: case 0x2d: case 0x2e: case 0x2f: case 0x30: case 0x31: case 0x32: case 0x33: case 0x34: case 0x35: case 0x36: case 0x37: case 0x38: case 0x39: case 0x3a: case 0x3b: case 0x3c: case 0x3d: case 0x3e: case 0x3f: kbd_queue(s, 0, 0); Log(("kbd: reading non-standard RAM addr %#x\n", val & 0x1f)); break; default: Log(("kbd: unsupported keyboard cmd=0x%02x\n", val)); break; } return rc; } static uint32_t kbd_read_data(void *opaque, uint32_t addr) { KBDState *s = (KBDState*)opaque; KBDQueue *q; MouseCmdQueue *mcq; MouseEventQueue *meq; int val, index, aux; q = &s->queue; mcq = &s->mouse_command_queue; meq = &s->mouse_event_queue; if (q->count == 0 && mcq->count == 0 && meq->count == 0) { /* NOTE: if no data left, we return the last keyboard one (needed for EMM386) */ /* XXX: need a timer to do things correctly */ index = q->rptr - 1; if (index < 0) index = KBD_QUEUE_SIZE - 1; val = q->data[index]; } else { aux = (s->status & KBD_STAT_MOUSE_OBF); if (!aux) { val = q->data[q->rptr]; if (++q->rptr == KBD_QUEUE_SIZE) q->rptr = 0; q->count--; } else { if (mcq->count) { val = mcq->data[mcq->rptr]; if (++mcq->rptr == MOUSE_CMD_QUEUE_SIZE) mcq->rptr = 0; mcq->count--; } else { val = meq->data[meq->rptr]; if (++meq->rptr == MOUSE_EVENT_QUEUE_SIZE) meq->rptr = 0; meq->count--; } } /* reading deasserts IRQ */ if (aux) PDMDevHlpISASetIrq(s->CTX_SUFF(pDevIns), 12, 0); else PDMDevHlpISASetIrq(s->CTX_SUFF(pDevIns), 1, 0); } /* reassert IRQs if data left */ kbd_update_irq(s); #ifdef DEBUG_KBD Log(("kbd: read data=0x%02x\n", val)); #endif return val; } static void kbd_reset_keyboard(KBDState *s) { s->scan_enabled = 1; s->scancode_set = 2; } static int kbd_write_keyboard(KBDState *s, int val) { switch(s->kbd_write_cmd) { default: case -1: switch(val) { case 0x00: kbd_queue(s, KBD_REPLY_ACK, 0); break; case 0x05: kbd_queue(s, KBD_REPLY_RESEND, 0); break; case KBD_CMD_GET_ID: kbd_queue(s, KBD_REPLY_ACK, 0); kbd_queue(s, 0xab, 0); kbd_queue(s, 0x83, 0); break; case KBD_CMD_ECHO: kbd_queue(s, KBD_CMD_ECHO, 0); break; case KBD_CMD_ENABLE: s->scan_enabled = 1; kbd_queue(s, KBD_REPLY_ACK, 0); break; case KBD_CMD_SCANCODE: case KBD_CMD_SET_LEDS: case KBD_CMD_SET_RATE: s->kbd_write_cmd = val; kbd_queue(s, KBD_REPLY_ACK, 0); break; case KBD_CMD_RESET_DISABLE: kbd_reset_keyboard(s); s->scan_enabled = 0; kbd_queue(s, KBD_REPLY_ACK, 0); break; case KBD_CMD_RESET_ENABLE: kbd_reset_keyboard(s); s->scan_enabled = 1; kbd_queue(s, KBD_REPLY_ACK, 0); break; case KBD_CMD_RESET: kbd_reset_keyboard(s); kbd_queue(s, KBD_REPLY_ACK, 0); kbd_queue(s, KBD_REPLY_POR, 0); break; default: kbd_queue(s, KBD_REPLY_ACK, 0); break; } break; case KBD_CMD_SCANCODE: #ifdef IN_RING3 if (val == 0) { if (s->scancode_set == 1) pc_kbd_put_keycode(s, 0x43); else if (s->scancode_set == 2) pc_kbd_put_keycode(s, 0x41); else if (s->scancode_set == 3) pc_kbd_put_keycode(s, 0x3f); } else { if (val >= 1 && val <= 3) s->scancode_set = val; kbd_queue(s, KBD_REPLY_ACK, 0); } #else return VINF_IOM_HC_IOPORT_WRITE; #endif case KBD_CMD_SET_LEDS: { #ifdef IN_RING3 PDMKEYBLEDS enmLeds = PDMKEYBLEDS_NONE; if (val & 0x01) enmLeds = (PDMKEYBLEDS)(enmLeds | PDMKEYBLEDS_SCROLLLOCK); if (val & 0x02) enmLeds = (PDMKEYBLEDS)(enmLeds | PDMKEYBLEDS_NUMLOCK); if (val & 0x04) enmLeds = (PDMKEYBLEDS)(enmLeds | PDMKEYBLEDS_CAPSLOCK); s->Keyboard.pDrv->pfnLedStatusChange(s->Keyboard.pDrv, enmLeds); #else return VINF_IOM_HC_IOPORT_WRITE; #endif kbd_queue(s, KBD_REPLY_ACK, 0); s->kbd_write_cmd = -1; } break; case KBD_CMD_SET_RATE: kbd_queue(s, KBD_REPLY_ACK, 0); s->kbd_write_cmd = -1; break; } return VINF_SUCCESS; } static void kbd_mouse_send_packet(KBDState *s, bool fToCmdQueue) { int aux = fToCmdQueue ? 1 : 2; unsigned int b; int dx1, dy1, dz1, dw1; dx1 = s->mouse_dx; dy1 = s->mouse_dy; dz1 = s->mouse_dz; dw1 = s->mouse_dw; LogRel3(("%s: dx=%d, dy=%d, dz=%d, dw=%d\n", __PRETTY_FUNCTION__, dx1, dy1, dz1, dw1)); /* XXX: increase range to 8 bits ? */ if (dx1 > 127) dx1 = 127; else if (dx1 < -127) dx1 = -127; if (dy1 > 127) dy1 = 127; else if (dy1 < -127) dy1 = -127; b = 0x08 | ((dx1 < 0) << 4) | ((dy1 < 0) << 5) | (s->mouse_buttons & 0x07); kbd_queue(s, b, aux); kbd_queue(s, dx1 & 0xff, aux); kbd_queue(s, dy1 & 0xff, aux); /* extra byte for IMPS/2 or IMEX */ switch(s->mouse_type) { default: break; case 3: if (dz1 > 127) dz1 = 127; else if (dz1 < -127) dz1 = -127; kbd_queue(s, dz1 & 0xff, aux); break; case 4: if (dz1 > 1) dz1 = 1; else if (dz1 < -1) dz1 = -1; else if (dw1 > 1) dw1 = 1; else if (dw1 < -1) dw1 = -1; if (dz1) dw1 = 0; if ((s->mouse_flags & MOUSE_REPORT_HORIZONTAL) && dw1) b = 0x40 | (dw1 & 0x3f); else { b = (dz1 & 0x0f) | ((dw1 << 1) & 0x0f) | ((s->mouse_buttons & 0x18) << 1); s->mouse_flags &= ~MOUSE_OUTSTANDING_CLICK; } kbd_queue(s, b, aux); break; } /* update deltas */ s->mouse_dx -= dx1; s->mouse_dy -= dy1; s->mouse_dz -= dz1; s->mouse_dw -= dw1; } #ifdef IN_RING3 static void pc_kbd_mouse_event(void *opaque, int dx, int dy, int dz, int dw, int buttons_state) { KBDState *s = (KBDState*)opaque; /* check if deltas are recorded when disabled */ if (!(s->mouse_status & MOUSE_STATUS_ENABLED)) return; s->mouse_dx += dx; s->mouse_dy -= dy; s->mouse_dz += dz; s->mouse_dw += dw; /* In horizontal reporting mode, we may need to send an additional packet * for the forth and fifth buttons, as they can't share a packet with a * horizontal scroll delta. */ if ( s->mouse_type == 4 && (s->mouse_buttons & 0x18) != (buttons_state & 0x18)) s->mouse_flags |= MOUSE_OUTSTANDING_CLICK; s->mouse_buttons = buttons_state; if (!(s->mouse_status & MOUSE_STATUS_REMOTE) && (s->mouse_event_queue.count < (MOUSE_EVENT_QUEUE_SIZE - 4))) { for(;;) { /* if not remote, send event. Multiple events are sent if too big deltas */ kbd_mouse_send_packet(s, false); if (s->mouse_dx == 0 && s->mouse_dy == 0 && s->mouse_dz == 0 && s->mouse_dw == 0 && !(s->mouse_flags & MOUSE_OUTSTANDING_CLICK)) break; } } } #endif /* IN_RING3 */ static void kbd_write_mouse(KBDState *s, int val) { #ifdef DEBUG_MOUSE LogRelFlowFunc(("kbd: write mouse 0x%02x\n", val)); #endif /* Flush the mouse command response queue. */ s->mouse_command_queue.count = 0; s->mouse_command_queue.rptr = 0; s->mouse_command_queue.wptr = 0; switch(s->mouse_write_cmd) { default: case -1: /* mouse command */ if (s->mouse_wrap) { if (val == AUX_RESET_WRAP) { s->mouse_wrap = 0; kbd_queue(s, AUX_ACK, 1); return; } else if (val != AUX_RESET) { kbd_queue(s, val, 1); return; } } switch(val) { case AUX_SET_SCALE11: s->mouse_status &= ~MOUSE_STATUS_SCALE21; kbd_queue(s, AUX_ACK, 1); break; case AUX_SET_SCALE21: s->mouse_status |= MOUSE_STATUS_SCALE21; kbd_queue(s, AUX_ACK, 1); break; case AUX_SET_STREAM: s->mouse_status &= ~MOUSE_STATUS_REMOTE; kbd_queue(s, AUX_ACK, 1); break; case AUX_SET_WRAP: s->mouse_wrap = 1; kbd_queue(s, AUX_ACK, 1); break; case AUX_SET_REMOTE: s->mouse_status |= MOUSE_STATUS_REMOTE; kbd_queue(s, AUX_ACK, 1); break; case AUX_GET_TYPE: kbd_queue(s, AUX_ACK, 1); kbd_queue(s, s->mouse_type, 1); break; case AUX_SET_RES: case AUX_SET_SAMPLE: s->mouse_write_cmd = val; kbd_queue(s, AUX_ACK, 1); break; case AUX_GET_SCALE: kbd_queue(s, AUX_ACK, 1); kbd_queue(s, s->mouse_status, 1); kbd_queue(s, s->mouse_resolution, 1); kbd_queue(s, s->mouse_sample_rate, 1); break; case AUX_POLL: kbd_queue(s, AUX_ACK, 1); kbd_mouse_send_packet(s, true); break; case AUX_ENABLE_DEV: s->mouse_status |= MOUSE_STATUS_ENABLED; kbd_queue(s, AUX_ACK, 1); break; case AUX_DISABLE_DEV: s->mouse_status &= ~MOUSE_STATUS_ENABLED; kbd_queue(s, AUX_ACK, 1); /* Flush the mouse events queue. */ s->mouse_event_queue.count = 0; s->mouse_event_queue.rptr = 0; s->mouse_event_queue.wptr = 0; break; case AUX_SET_DEFAULT: s->mouse_sample_rate = 100; s->mouse_resolution = 2; s->mouse_status = 0; kbd_queue(s, AUX_ACK, 1); break; case AUX_RESET: s->mouse_sample_rate = 100; s->mouse_resolution = 2; s->mouse_status = 0; s->mouse_type = 0; kbd_queue(s, AUX_ACK, 1); kbd_queue(s, 0xaa, 1); kbd_queue(s, s->mouse_type, 1); /* Flush the mouse events queue. */ s->mouse_event_queue.count = 0; s->mouse_event_queue.rptr = 0; s->mouse_event_queue.wptr = 0; break; default: /* NACK all commands we don't know. The usecase for this is the OS/2 mouse driver which will try read 0xE2 in order to figure out if it's a trackpoint device or not. If it doesn't get a NACK (or ACK) on the command it'll do several hundred thousand status reads before giving up. This is slows down the OS/2 boot up considerably. (It also seems that the code is somehow vulnerable while polling like this and that mouse or keyboard input at this point might screw things up badly.) From http://www.win.tue.nl/~aeb/linux/kbd/scancodes-13.html: Every command or data byte sent to the mouse (except for the resend command fe) is ACKed with fa. If the command or data is invalid, it is NACKed with fe. If the next byte is again invalid, the reply is ERROR: fc. */ /** @todo send error if we NACKed the previous command? */ kbd_queue(s, AUX_NACK, 1); break; } break; case AUX_SET_SAMPLE: s->mouse_sample_rate = val; /* detect IMPS/2 or IMEX */ /* And enable horizontal scrolling reporting when requested */ switch(s->mouse_detect_state) { default: case 0: if (val == 200) s->mouse_detect_state = 1; break; case 1: if (val == 100) s->mouse_detect_state = 2; else if (val == 200) s->mouse_detect_state = 3; else if ((val == 80) && s->mouse_type == 4 /* IMEX */) /* enable horizontal scrolling, byte two */ s->mouse_detect_state = 4; else s->mouse_detect_state = 0; break; case 2: if (val == 80) { LogRelFlowFunc(("switching mouse device to IMPS/2 mode\n")); s->mouse_type = 3; /* IMPS/2 */ } s->mouse_detect_state = 0; break; case 3: if (val == 80) { LogRelFlowFunc(("switching mouse device to IMEX mode\n")); s->mouse_type = 4; /* IMEX */ } s->mouse_detect_state = 0; break; case 4: if (val == 40) { LogFlowFunc(("enabling IMEX horizontal scrolling reporting\n")); s->mouse_flags |= MOUSE_REPORT_HORIZONTAL; } s->mouse_detect_state = 0; break; } kbd_queue(s, AUX_ACK, 1); s->mouse_write_cmd = -1; break; case AUX_SET_RES: s->mouse_resolution = val; kbd_queue(s, AUX_ACK, 1); s->mouse_write_cmd = -1; break; } } static int kbd_write_data(void *opaque, uint32_t addr, uint32_t val) { int rc = VINF_SUCCESS; KBDState *s = (KBDState*)opaque; #ifdef DEBUG_KBD Log(("kbd: write data=0x%02x\n", val)); #endif switch(s->write_cmd) { case 0: rc = kbd_write_keyboard(s, val); break; case KBD_CCMD_WRITE_MODE: s->mode = val; s->translate = (s->mode & KBD_MODE_KCC) == KBD_MODE_KCC; kbd_update_irq(s); break; case KBD_CCMD_WRITE_OBUF: kbd_queue(s, val, 0); break; case KBD_CCMD_WRITE_AUX_OBUF: kbd_queue(s, val, 1); break; case KBD_CCMD_WRITE_OUTPORT: #ifdef TARGET_I386 # ifndef IN_RING3 if (PDMDevHlpA20IsEnabled(s->CTX_SUFF(pDevIns)) != !!(val & 2)) rc = VINF_IOM_HC_IOPORT_WRITE; # else /* IN_RING3 */ PDMDevHlpA20Set(s->CTX_SUFF(pDevIns), !!(val & 2)); # endif /* !IN_RING3 */ #endif if (!(val & 1)) { # ifndef IN_RING3 rc = VINF_IOM_HC_IOPORT_WRITE; # else rc = PDMDevHlpVMReset(s->CTX_SUFF(pDevIns)); # endif } break; case KBD_CCMD_WRITE_MOUSE: kbd_write_mouse(s, val); break; default: break; } s->write_cmd = 0; return rc; } #ifdef IN_RING3 static void kbd_reset(void *opaque) { KBDState *s = (KBDState*)opaque; KBDQueue *q; MouseCmdQueue *mcq; MouseEventQueue *meq; s->kbd_write_cmd = -1; s->mouse_write_cmd = -1; s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT; s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED; /* Resetting everything, keyword was not working right on NT4 reboot. */ s->write_cmd = 0; s->scan_enabled = 0; s->translate = 0; s->scancode_set = 2; s->mouse_status = 0; s->mouse_resolution = 0; s->mouse_sample_rate = 0; s->mouse_wrap = 0; s->mouse_type = 0; s->mouse_detect_state = 0; s->mouse_dx = 0; s->mouse_dy = 0; s->mouse_dz = 0; s->mouse_dw = 0; s->mouse_flags = 0; s->mouse_buttons = 0; q = &s->queue; q->rptr = 0; q->wptr = 0; q->count = 0; mcq = &s->mouse_command_queue; mcq->rptr = 0; mcq->wptr = 0; mcq->count = 0; meq = &s->mouse_event_queue; meq->rptr = 0; meq->wptr = 0; meq->count = 0; } static void kbd_save(QEMUFile* f, void* opaque) { uint32_t cItems; int i; KBDState *s = (KBDState*)opaque; qemu_put_8s(f, &s->write_cmd); qemu_put_8s(f, &s->status); qemu_put_8s(f, &s->mode); qemu_put_be32s(f, &s->kbd_write_cmd); qemu_put_be32s(f, &s->scan_enabled); qemu_put_be32s(f, &s->mouse_write_cmd); qemu_put_8s(f, &s->mouse_status); qemu_put_8s(f, &s->mouse_resolution); qemu_put_8s(f, &s->mouse_sample_rate); qemu_put_8s(f, &s->mouse_wrap); qemu_put_8s(f, &s->mouse_type); qemu_put_8s(f, &s->mouse_detect_state); qemu_put_be32s(f, &s->mouse_dx); qemu_put_be32s(f, &s->mouse_dy); qemu_put_be32s(f, &s->mouse_dz); qemu_put_be32s(f, &s->mouse_dw); qemu_put_be32s(f, &s->mouse_flags); qemu_put_8s(f, &s->mouse_buttons); /* XXX: s->scancode_set isn't being saved, but we only really support set 2, * so no real harm done. */ /* * We have to save the queues too. */ cItems = s->queue.count; SSMR3PutU32(f, cItems); for (i = s->queue.rptr; cItems-- > 0; i = (i + 1) % RT_ELEMENTS(s->queue.data)) SSMR3PutU8(f, s->queue.data[i]); Log(("kbd_save: %d keyboard queue items stored\n", s->queue.count)); cItems = s->mouse_command_queue.count; SSMR3PutU32(f, cItems); for (i = s->mouse_command_queue.rptr; cItems-- > 0; i = (i + 1) % RT_ELEMENTS(s->mouse_command_queue.data)) SSMR3PutU8(f, s->mouse_command_queue.data[i]); Log(("kbd_save: %d mouse command queue items stored\n", s->mouse_command_queue.count)); cItems = s->mouse_event_queue.count; SSMR3PutU32(f, cItems); for (i = s->mouse_event_queue.rptr; cItems-- > 0; i = (i + 1) % RT_ELEMENTS(s->mouse_event_queue.data)) SSMR3PutU8(f, s->mouse_event_queue.data[i]); Log(("kbd_save: %d mouse event queue items stored\n", s->mouse_event_queue.count)); /* terminator */ SSMR3PutU32(f, ~0); } static int kbd_load(QEMUFile* f, void* opaque, int version_id) { uint32_t u32, i; int rc; KBDState *s = (KBDState*)opaque; if (version_id < 2 || version_id > PCKBD_SAVED_STATE_VERSION) return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; qemu_get_8s(f, &s->write_cmd); qemu_get_8s(f, &s->status); qemu_get_8s(f, &s->mode); qemu_get_be32s(f, (uint32_t *)&s->kbd_write_cmd); qemu_get_be32s(f, (uint32_t *)&s->scan_enabled); qemu_get_be32s(f, (uint32_t *)&s->mouse_write_cmd); qemu_get_8s(f, &s->mouse_status); qemu_get_8s(f, &s->mouse_resolution); qemu_get_8s(f, &s->mouse_sample_rate); qemu_get_8s(f, &s->mouse_wrap); qemu_get_8s(f, &s->mouse_type); qemu_get_8s(f, &s->mouse_detect_state); qemu_get_be32s(f, (uint32_t *)&s->mouse_dx); qemu_get_be32s(f, (uint32_t *)&s->mouse_dy); qemu_get_be32s(f, (uint32_t *)&s->mouse_dz); if (version_id > 2) { SSMR3GetS32(f, &s->mouse_dw); SSMR3GetS32(f, &s->mouse_flags); } qemu_get_8s(f, &s->mouse_buttons); s->queue.count = 0; s->queue.rptr = 0; s->queue.wptr = 0; s->mouse_command_queue.count = 0; s->mouse_command_queue.rptr = 0; s->mouse_command_queue.wptr = 0; s->mouse_event_queue.count = 0; s->mouse_event_queue.rptr = 0; s->mouse_event_queue.wptr = 0; /* Determine the translation state. */ s->translate = (s->mode & KBD_MODE_KCC) == KBD_MODE_KCC; s->scancode_set = 2; /* XXX: See comment in kbd_save(). */ /* * Load the queues */ rc = SSMR3GetU32(f, &u32); if (RT_FAILURE(rc)) return rc; if (u32 > RT_ELEMENTS(s->queue.data)) { AssertMsgFailed(("u32=%#x\n", u32)); return VERR_SSM_DATA_UNIT_FORMAT_CHANGED; } for (i = 0; i < u32; i++) { rc = SSMR3GetU8(f, &s->queue.data[i]); if (RT_FAILURE(rc)) return rc; } s->queue.wptr = u32 % RT_ELEMENTS(s->queue.data); s->queue.count = u32; Log(("kbd_load: %d keyboard queue items loaded\n", u32)); rc = SSMR3GetU32(f, &u32); if (RT_FAILURE(rc)) return rc; if (u32 > RT_ELEMENTS(s->mouse_command_queue.data)) { AssertMsgFailed(("u32=%#x\n", u32)); return VERR_SSM_DATA_UNIT_FORMAT_CHANGED; } for (i = 0; i < u32; i++) { rc = SSMR3GetU8(f, &s->mouse_command_queue.data[i]); if (RT_FAILURE(rc)) return rc; } s->mouse_command_queue.wptr = u32 % RT_ELEMENTS(s->mouse_command_queue.data); s->mouse_command_queue.count = u32; Log(("kbd_load: %d mouse command queue items loaded\n", u32)); rc = SSMR3GetU32(f, &u32); if (RT_FAILURE(rc)) return rc; if (u32 > RT_ELEMENTS(s->mouse_event_queue.data)) { AssertMsgFailed(("u32=%#x\n", u32)); return VERR_SSM_DATA_UNIT_FORMAT_CHANGED; } for (i = 0; i < u32; i++) { rc = SSMR3GetU8(f, &s->mouse_event_queue.data[i]); if (RT_FAILURE(rc)) return rc; } s->mouse_event_queue.wptr = u32 % RT_ELEMENTS(s->mouse_event_queue.data); s->mouse_event_queue.count = u32; Log(("kbd_load: %d mouse event queue items loaded\n", u32)); /* terminator */ rc = SSMR3GetU32(f, &u32); if (RT_FAILURE(rc)) return rc; if (u32 != ~0U) { AssertMsgFailed(("u32=%#x\n", u32)); return VERR_SSM_DATA_UNIT_FORMAT_CHANGED; } return 0; } #endif /* IN_RING3 */ /* VirtualBox code start */ /* -=-=-=-=-=- wrappers -=-=-=-=-=- */ /** * Port I/O Handler for keyboard data IN operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument - ignored. * @param Port Port number used for the IN operation. * @param pu32 Where to store the result. * @param cb Number of bytes read. */ PDMBOTHCBDECL(int) kbdIOPortDataRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { NOREF(pvUser); if (cb == 1) { KBDState *pThis = PDMINS_2_DATA(pDevIns, KBDState *); int rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_HC_IOPORT_READ); if (RT_LIKELY(rc == VINF_SUCCESS)) { *pu32 = kbd_read_data(pThis, Port); PDMCritSectLeave(&pThis->CritSect); Log2(("kbdIOPortDataRead: Port=%#x cb=%d *pu32=%#x\n", Port, cb, *pu32)); } return rc; } AssertMsgFailed(("Port=%#x cb=%d\n", Port, cb)); return VERR_IOM_IOPORT_UNUSED; } /** * Port I/O Handler for keyboard data OUT operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument - ignored. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) kbdIOPortDataWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { int rc = VINF_SUCCESS; NOREF(pvUser); if (cb == 1) { KBDState *pThis = PDMINS_2_DATA(pDevIns, KBDState *); rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_HC_IOPORT_WRITE); if (RT_LIKELY(rc == VINF_SUCCESS)) { rc = kbd_write_data(pThis, Port, u32); PDMCritSectLeave(&pThis->CritSect); Log2(("kbdIOPortDataWrite: Port=%#x cb=%d u32=%#x\n", Port, cb, u32)); } } else AssertMsgFailed(("Port=%#x cb=%d\n", Port, cb)); return rc; } /** * Port I/O Handler for keyboard status IN operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument - ignored. * @param Port Port number used for the IN operation. * @param pu32 Where to store the result. * @param cb Number of bytes read. */ PDMBOTHCBDECL(int) kbdIOPortStatusRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { NOREF(pvUser); if (cb == 1) { KBDState *pThis = PDMINS_2_DATA(pDevIns, KBDState *); int rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_HC_IOPORT_READ); if (RT_LIKELY(rc == VINF_SUCCESS)) { *pu32 = kbd_read_status(pThis, Port); PDMCritSectLeave(&pThis->CritSect); Log2(("kbdIOPortStatusRead: Port=%#x cb=%d -> *pu32=%#x\n", Port, cb, *pu32)); } return rc; } AssertMsgFailed(("Port=%#x cb=%d\n", Port, cb)); return VERR_IOM_IOPORT_UNUSED; } /** * Port I/O Handler for keyboard command OUT operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument - ignored. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) kbdIOPortCommandWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { int rc = VINF_SUCCESS; NOREF(pvUser); if (cb == 1) { KBDState *pThis = PDMINS_2_DATA(pDevIns, KBDState *); rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_HC_IOPORT_WRITE); if (RT_LIKELY(rc == VINF_SUCCESS)) { rc = kbd_write_command(pThis, Port, u32); PDMCritSectLeave(&pThis->CritSect); Log2(("kbdIOPortCommandWrite: Port=%#x cb=%d u32=%#x rc=%Rrc\n", Port, cb, u32, rc)); } } else AssertMsgFailed(("Port=%#x cb=%d\n", Port, cb)); return rc; } #ifdef IN_RING3 /** * Saves a state of the keyboard device. * * @returns VBox status code. * @param pDevIns The device instance. * @param pSSMHandle The handle to save the state to. */ static DECLCALLBACK(int) kbdSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle) { kbd_save(pSSMHandle, PDMINS_2_DATA(pDevIns, KBDState *)); return VINF_SUCCESS; } /** * Loads a saved keyboard device state. * * @returns VBox status code. * @param pDevIns The device instance. * @param pSSMHandle The handle to the saved state. * @param uVersion The data unit version number. * @param uPass The data pass. */ static DECLCALLBACK(int) kbdLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t uVersion, uint32_t uPass) { Assert(uPass == SSM_PASS_FINAL); NOREF(uPass); return kbd_load(pSSMHandle, PDMINS_2_DATA(pDevIns, KBDState *), uVersion); } /** * Reset notification. * * @returns VBox status. * @param pDevIns The device instance data. */ static DECLCALLBACK(void) kbdReset(PPDMDEVINS pDevIns) { kbd_reset(PDMINS_2_DATA(pDevIns, KBDState *)); } /* -=-=-=-=-=- Keyboard: IBase -=-=-=-=-=- */ /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) kbdKeyboardQueryInterface(PPDMIBASE pInterface, const char *pszIID) { KBDState *pThis = RT_FROM_MEMBER(pInterface, KBDState, Keyboard.IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->Keyboard.IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIKEYBOARDPORT, &pThis->Keyboard.IPort); return NULL; } /* -=-=-=-=-=- Keyboard: IKeyboardPort -=-=-=-=-=- */ /** * Keyboard event handler. * * @returns VBox status code. * @param pInterface Pointer to the keyboard port interface (KBDState::Keyboard.IPort). * @param u8KeyCode The keycode. */ static DECLCALLBACK(int) kbdKeyboardPutEvent(PPDMIKEYBOARDPORT pInterface, uint8_t u8KeyCode) { KBDState *pThis = RT_FROM_MEMBER(pInterface, KBDState, Keyboard.IPort); int rc = PDMCritSectEnter(&pThis->CritSect, VERR_SEM_BUSY); AssertReleaseRC(rc); pc_kbd_put_keycode(pThis, u8KeyCode); PDMCritSectLeave(&pThis->CritSect); return VINF_SUCCESS; } /* -=-=-=-=-=- Mouse: IBase -=-=-=-=-=- */ /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) kbdMouseQueryInterface(PPDMIBASE pInterface, const char *pszIID) { KBDState *pThis = RT_FROM_MEMBER(pInterface, KBDState, Mouse.IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->Mouse.IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMOUSEPORT, &pThis->Mouse.IPort); return NULL; } /* -=-=-=-=-=- Mouse: IMousePort -=-=-=-=-=- */ /** * Mouse event handler. * * @returns VBox status code. * @param pInterface Pointer to the mouse port interface (KBDState::Mouse.IPort). * @param i32DeltaX The X delta. * @param i32DeltaY The Y delta. * @param i32DeltaZ The Z delta. * @param fButtonStates The button states. */ static DECLCALLBACK(int) kbdMousePutEvent(PPDMIMOUSEPORT pInterface, int32_t i32DeltaX, int32_t i32DeltaY, int32_t i32DeltaZ, int32_t i32DeltaW, uint32_t fButtonStates) { KBDState *pThis = RT_FROM_MEMBER(pInterface, KBDState, Mouse.IPort); int rc = PDMCritSectEnter(&pThis->CritSect, VERR_SEM_BUSY); AssertReleaseRC(rc); pc_kbd_mouse_event(pThis, i32DeltaX, i32DeltaY, i32DeltaZ, i32DeltaW, fButtonStates); PDMCritSectLeave(&pThis->CritSect); return VINF_SUCCESS; } /* -=-=-=-=-=- real code -=-=-=-=-=- */ /** * Attach command. * * This is called to let the device attach to a driver for a specified LUN * during runtime. This is not called during VM construction, the device * constructor have to attach to all the available drivers. * * This is like plugging in the keyboard or mouse after turning on the PC. * * @returns VBox status code. * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. * @remark The keyboard controller doesn't support this action, this is just * implemented to try out the driver<->device structure. */ static DECLCALLBACK(int) kbdAttach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { int rc; KBDState *pThis = PDMINS_2_DATA(pDevIns, KBDState *); AssertMsgReturn(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG, ("PS/2 device does not support hotplugging\n"), VERR_INVALID_PARAMETER); switch (iLUN) { /* LUN #0: keyboard */ case 0: rc = PDMDevHlpDriverAttach(pDevIns, iLUN, &pThis->Keyboard.IBase, &pThis->Keyboard.pDrvBase, "Keyboard Port"); if (RT_SUCCESS(rc)) { pThis->Keyboard.pDrv = PDMIBASE_QUERY_INTERFACE(pThis->Keyboard.pDrvBase, PDMIKEYBOARDCONNECTOR); if (!pThis->Keyboard.pDrv) { AssertLogRelMsgFailed(("LUN #0 doesn't have a keyboard interface! rc=%Rrc\n", rc)); rc = VERR_PDM_MISSING_INTERFACE; } } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { Log(("%s/%d: warning: no driver attached to LUN #0!\n", pDevIns->pReg->szName, pDevIns->iInstance)); rc = VINF_SUCCESS; } else AssertLogRelMsgFailed(("Failed to attach LUN #0! rc=%Rrc\n", rc)); break; /* LUN #1: aux/mouse */ case 1: rc = PDMDevHlpDriverAttach(pDevIns, iLUN, &pThis->Mouse.IBase, &pThis->Mouse.pDrvBase, "Aux (Mouse) Port"); if (RT_SUCCESS(rc)) { pThis->Mouse.pDrv = PDMIBASE_QUERY_INTERFACE(pThis->Mouse.pDrvBase, PDMIMOUSECONNECTOR); if (!pThis->Mouse.pDrv) { AssertLogRelMsgFailed(("LUN #1 doesn't have a mouse interface! rc=%Rrc\n", rc)); rc = VERR_PDM_MISSING_INTERFACE; } } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { Log(("%s/%d: warning: no driver attached to LUN #1!\n", pDevIns->pReg->szName, pDevIns->iInstance)); rc = VINF_SUCCESS; } else AssertLogRelMsgFailed(("Failed to attach LUN #1! rc=%Rrc\n", rc)); break; default: AssertMsgFailed(("Invalid LUN #%d\n", iLUN)); return VERR_PDM_NO_SUCH_LUN; } return rc; } /** * Detach notification. * * This is called when a driver is detaching itself from a LUN of the device. * The device should adjust it's state to reflect this. * * This is like unplugging the network cable to use it for the laptop or * something while the PC is still running. * * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. * @remark The keyboard controller doesn't support this action, this is just * implemented to try out the driver<->device structure. */ static DECLCALLBACK(void) kbdDetach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { #if 0 /* * Reset the interfaces and update the controller state. */ KBDState *pThis = PDMINS_2_DATA(pDevIns, KBDState *); switch (iLUN) { /* LUN #0: keyboard */ case 0: pThis->Keyboard.pDrv = NULL; pThis->Keyboard.pDrvBase = NULL; break; /* LUN #1: aux/mouse */ case 1: pThis->Mouse.pDrv = NULL; pThis->Mouse.pDrvBase = NULL; break; default: AssertMsgFailed(("Invalid LUN #%d\n", iLUN)); break; } #endif } /** * @copydoc FNPDMDEVRELOCATE */ static DECLCALLBACK(void) kdbRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta) { KBDState *pThis = PDMINS_2_DATA(pDevIns, KBDState *); pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); } /** * Destruct a device instance for a VM. * * @returns VBox status. * @param pDevIns The device instance data. */ static DECLCALLBACK(int) kbdDestruct(PPDMDEVINS pDevIns) { KBDState *pThis = PDMINS_2_DATA(pDevIns, KBDState *); PDMDEV_CHECK_VERSIONS_RETURN_QUIET(pDevIns); PDMR3CritSectDelete(&pThis->CritSect); return VINF_SUCCESS; } /** * @interface_method_impl{PDMDEVREG,pfnConstruct} */ static DECLCALLBACK(int) kbdConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { KBDState *pThis = PDMINS_2_DATA(pDevIns, KBDState *); int rc; bool fGCEnabled; bool fR0Enabled; Assert(iInstance == 0); PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); /* * Validate and read the configuration. */ if (!CFGMR3AreValuesValid(pCfg, "GCEnabled\0R0Enabled\0")) return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES; rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &fGCEnabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to query \"GCEnabled\" from the config")); rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &fR0Enabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to query \"R0Enabled\" from the config")); Log(("pckbd: fGCEnabled=%RTbool fR0Enabled=%RTbool\n", fGCEnabled, fR0Enabled)); /* * Initialize the interfaces. */ pThis->pDevInsR3 = pDevIns; pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pThis->Keyboard.IBase.pfnQueryInterface = kbdKeyboardQueryInterface; pThis->Keyboard.IPort.pfnPutEvent = kbdKeyboardPutEvent; pThis->Mouse.IBase.pfnQueryInterface = kbdMouseQueryInterface; pThis->Mouse.IPort.pfnPutEvent = kbdMousePutEvent; /* * Initialize the critical section. */ rc = PDMDevHlpCritSectInit(pDevIns, &pThis->CritSect, RT_SRC_POS, "PS2KM#%d", iInstance); if (RT_FAILURE(rc)) return rc; /* * Register I/O ports, save state, keyboard event handler and mouse event handlers. */ rc = PDMDevHlpIOPortRegister(pDevIns, 0x60, 1, NULL, kbdIOPortDataWrite, kbdIOPortDataRead, NULL, NULL, "PC Keyboard - Data"); if (RT_FAILURE(rc)) return rc; rc = PDMDevHlpIOPortRegister(pDevIns, 0x64, 1, NULL, kbdIOPortCommandWrite, kbdIOPortStatusRead, NULL, NULL, "PC Keyboard - Command / Status"); if (RT_FAILURE(rc)) return rc; if (fGCEnabled) { rc = PDMDevHlpIOPortRegisterRC(pDevIns, 0x60, 1, 0, "kbdIOPortDataWrite", "kbdIOPortDataRead", NULL, NULL, "PC Keyboard - Data"); if (RT_FAILURE(rc)) return rc; rc = PDMDevHlpIOPortRegisterRC(pDevIns, 0x64, 1, 0, "kbdIOPortCommandWrite", "kbdIOPortStatusRead", NULL, NULL, "PC Keyboard - Command / Status"); if (RT_FAILURE(rc)) return rc; } if (fR0Enabled) { rc = PDMDevHlpIOPortRegisterR0(pDevIns, 0x60, 1, 0, "kbdIOPortDataWrite", "kbdIOPortDataRead", NULL, NULL, "PC Keyboard - Data"); if (RT_FAILURE(rc)) return rc; rc = PDMDevHlpIOPortRegisterR0(pDevIns, 0x64, 1, 0, "kbdIOPortCommandWrite", "kbdIOPortStatusRead", NULL, NULL, "PC Keyboard - Command / Status"); if (RT_FAILURE(rc)) return rc; } rc = PDMDevHlpSSMRegister(pDevIns, PCKBD_SAVED_STATE_VERSION, sizeof(*pThis), kbdSaveExec, kbdLoadExec); if (RT_FAILURE(rc)) return rc; /* * Attach to the keyboard and mouse drivers. */ rc = kbdAttach(pDevIns, 0 /* keyboard LUN # */, PDM_TACH_FLAGS_NOT_HOT_PLUG); if (RT_FAILURE(rc)) return rc; rc = kbdAttach(pDevIns, 1 /* aux/mouse LUN # */, PDM_TACH_FLAGS_NOT_HOT_PLUG); if (RT_FAILURE(rc)) return rc; /* * Initialize the device state. */ kbdReset(pDevIns); return VINF_SUCCESS; } /** * The device registration structure. */ const PDMDEVREG g_DevicePS2KeyboardMouse = { /* u32Version */ PDM_DEVREG_VERSION, /* szName */ "pckbd", /* szRCMod */ "VBoxDDGC.gc", /* szR0Mod */ "VBoxDDR0.r0", /* pszDescription */ "PS/2 Keyboard and Mouse device. Emulates both the keyboard, mouse and the keyboard controller. " "LUN #0 is the keyboard connector. " "LUN #1 is the aux/mouse connector.", /* fFlags */ PDM_DEVREG_FLAGS_HOST_BITS_DEFAULT | PDM_DEVREG_FLAGS_GUEST_BITS_32_64 | PDM_DEVREG_FLAGS_PAE36 | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0, /* fClass */ PDM_DEVREG_CLASS_INPUT, /* cMaxInstances */ 1, /* cbInstance */ sizeof(KBDState), /* pfnConstruct */ kbdConstruct, /* pfnDestruct */ kbdDestruct, /* pfnRelocate */ kdbRelocate, /* pfnIOCtl */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ kbdReset, /* pfnSuspend */ NULL, /* pfnResume */ NULL, /* pfnAttach */ kbdAttach, /* pfnDetach */ kbdDetach, /* pfnQueryInterface. */ NULL, /* pfnInitComplete */ NULL, /* pfnPowerOff */ NULL, /* pfnSoftReset */ NULL, /* u32VersionEnd */ PDM_DEVREG_VERSION }; #endif /* IN_RING3 */ #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */