/* $Id: DevPcArch.c 4071 2007-08-07 17:07:59Z vboxsync $ */ /** @file * PC Architechture Device. */ /* * Copyright (C) 2006-2007 innotek GmbH * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License as published by the Free Software Foundation, * in version 2 as it comes in the "COPYING" file of the VirtualBox OSE * distribution. VirtualBox OSE is distributed in the hope that it will * be useful, but WITHOUT ANY WARRANTY of any kind. */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_PC_ARCH #include #include #include #include #include #include #include "Builtins.h" /******************************************************************************* * Structures and Typedefs * *******************************************************************************/ /** * PC Bios instance data structure. */ typedef struct DEVPCARCH { /** Pointer back to the device instance. */ PPDMDEVINS pDevIns; } DEVPCARCH, *PDEVPCARCH; /** * Port I/O Handler for math coprocessor IN operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument - ignored. * @param uPort Port number used for the IN operation. * @param pu32 Where to store the result. * @param cb Number of bytes read. */ static DECLCALLBACK(int) pcarchIOPortFPURead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { int rc; NOREF(pvUser); NOREF(pDevIns); NOREF(pu32); rc = PDMDeviceDBGFStop(pDevIns, PDM_SRC_POS, "Port=%#x cb=%d\n", Port, cb); if (rc == VINF_SUCCESS) rc = VERR_IOM_IOPORT_UNUSED; return rc; } /** * Port I/O Handler for math coprocessor OUT operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument - ignored. * @param uPort Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. * @todo Add IGNNE support. */ static DECLCALLBACK(int) pcarchIOPortFPUWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { int rc = VINF_SUCCESS; NOREF(pvUser); if (cb == 1) { switch (Port) { /* * Clear busy latch. */ case 0xf0: Log2(("PCARCH: FPU Clear busy latch u32=%#x\n", u32)); /* This is triggered when booting Knoppix (3.7) */ #if 0 if (!u32) rc = PDMDeviceDBGFStop(pDevIns, PDM_SRC_POS, "Port=%#x cb=%d u32=%#x\n", Port, cb, u32); #endif /* pDevIns->pDevHlp->pfnPICSetIrq(pDevIns, 13, 0); */ break; /* Reset. */ case 0xf1: Log2(("PCARCH: FPU Reset cb=%d u32=%#x\n", Port, cb, u32)); /** @todo figure out what the difference between FPU ports 0xf0 and 0xf1 are... */ /* pDevIns->pDevHlp->pfnPICSetIrq(pDevIns, 13, 0); */ break; /* opcode transfers */ case 0xf8: case 0xfa: case 0xfc: default: rc = PDMDeviceDBGFStop(pDevIns, PDM_SRC_POS, "Port=%#x cb=%d u32=%#x\n", Port, cb, u32); break; } /* this works better, but probably not entirely correct. */ PDMDevHlpISASetIrq(pDevIns, 13, 0); } else rc = PDMDeviceDBGFStop(pDevIns, PDM_SRC_POS, "Port=%#x cb=%d u32=%#x\n", Port, cb, u32); return rc; } /** * Port I/O Handler for PS/2 system control port A IN operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument - ignored. * @param uPort Port number used for the IN operation. * @param pu32 Where to store the result. * @param cb Number of bytes read. * * @todo Check if the A20 enable/disable method implemented here in any way * should cooperate with the one implemented in the PS/2 keyboard device. * This probably belongs together in the PS/2 keyboard device (since that * is where the "port B" mentioned by Ralph Brown is implemented). * * @remark Ralph Brown and friends have this to say about this port: * * 0092 RW PS/2 system control port A (port B is at PORT 0061h) (see #P0415) * * Bitfields for PS/2 system control port A: * Bit(s) Description (Table P0415) * 7-6 any bit set to 1 turns activity light on * 5 unused * 4 watchdog timout occurred * 3 =0 RTC/CMOS security lock (on password area) unlocked * =1 CMOS locked (done by POST) * 2 unused * 1 A20 is active * 0 =0 system reset or write * =1 pulse alternate reset pin (high-speed alternate CPU reset) * Notes: once set, bit 3 may only be cleared by a power-on reset * on at least the C&T 82C235, bit 0 remains set through a CPU reset to * allow the BIOS to determine the reset method * on the PS/2 30-286 & "Tortuga" the INT 15h/87h memory copy does * not use this port for A20 control, but instead uses the keyboard * controller (8042). Reportedly this may cause the system to crash * when access to the 8042 is disabled in password server mode * (see #P0398). * SeeAlso: #P0416,#P0417,MSR 00001000h */ static DECLCALLBACK(int) pcarchIOPortPS2SysControlPortARead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { if (cb == 1) { *pu32 = PDMDevHlpA20IsEnabled(pDevIns) << 1; return VINF_SUCCESS; } return PDMDeviceDBGFStop(pDevIns, PDM_SRC_POS, "Port=%#x cb=%d\n", Port, cb); } /** * Port I/O Handler for PS/2 system control port A OUT operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument - ignored. * @param uPort Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. * @see Remark and todo of pcarchIOPortPS2SysControlPortARead(). */ static DECLCALLBACK(int) pcarchIOPortPS2SysControlPortAWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { NOREF(pvUser); if (cb == 1) { /* * Fast reset? */ if (u32 & 1) return PDMDevHlpVMReset(pDevIns); /* * A20 is the only thing we care about of the other stuff. */ PDMDevHlpA20Set(pDevIns, !!(u32 & 2)); return VINF_SUCCESS; } return PDMDeviceDBGFStop(pDevIns, PDM_SRC_POS, "Port=%#x cb=%d u32=%#x\n", Port, cb, u32); } /** * Construct a device instance for a VM. * * @returns VBox status. * @param pDevIns The device instance data. * If the registration structure is needed, pDevIns->pDevReg points to it. * @param iInstance Instance number. Use this to figure out which registers and such to use. * The device number is also found in pDevIns->iInstance, but since it's * likely to be freqently used PDM passes it as parameter. * @param pCfgHandle Configuration node handle for the device. Use this to obtain the configuration * of the device instance. It's also found in pDevIns->pCfgHandle, but like * iInstance it's expected to be used a bit in this function. */ static DECLCALLBACK(int) pcarchConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfgHandle) { PDEVPCARCH pData = PDMINS2DATA(pDevIns, PDEVPCARCH); int rc; Assert(iInstance == 0); /* * Validate configuration. */ if (!CFGMR3AreValuesValid(pCfgHandle, "\0")) return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES; /* * Init the data. */ pData->pDevIns = pDevIns; /* * Register I/O Ports */ rc = PDMDevHlpIOPortRegister(pDevIns, 0xF0, 0x10, NULL, pcarchIOPortFPUWrite, pcarchIOPortFPURead, NULL, NULL, "Math Co-Processor (DOS/OS2 mode)"); if (VBOX_FAILURE(rc)) return rc; rc = PDMDevHlpIOPortRegister(pDevIns, 0x92, 1, NULL, pcarchIOPortPS2SysControlPortAWrite, pcarchIOPortPS2SysControlPortARead, NULL, NULL, "PS/2 system control port A (A20 and more)"); if (VBOX_FAILURE(rc)) return rc; /* * Reserve ROM/MMIO areas: * 1. 0x000a0000-0x000fffff * 2. 0xfff80000-0xffffffff */ rc = PDMDevHlpPhysReserve(pDevIns, 0x000a0000, 0x50000, "Low ROM Region"); if (VBOX_FAILURE(rc)) return rc; rc = PDMDevHlpPhysReserve(pDevIns, 0xfff80000, 0x80000, "High ROM Region"); if (VBOX_FAILURE(rc)) return rc; return VINF_SUCCESS; } /** * The device registration structure. */ const PDMDEVREG g_DevicePcArch = { /* u32Version */ PDM_DEVREG_VERSION, /* szDeviceName */ "pcarch", /* szGCMod */ "", /* szR0Mod */ "", /* pszDescription */ "PC Architecture Device", /* fFlags */ PDM_DEVREG_FLAGS_HOST_BITS_DEFAULT | PDM_DEVREG_FLAGS_GUEST_BITS_32, /* fClass */ PDM_DEVREG_CLASS_ARCH, /* cMaxInstances */ 1, /* cbInstance */ sizeof(DEVPCARCH), /* pfnConstruct */ pcarchConstruct, /* pfnDestruct */ NULL, /* pfnRelocate */ NULL, /* pfnIOCtl */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ NULL, /* pfnSuspend */ NULL, /* pfnResume */ NULL, /* pfnAttach */ NULL, /* pfnDetach */ NULL, /* pfnQueryInterface. */ NULL, /* pfnInitComplete. */ NULL };