/* $Id: DevParallel.cpp 23989 2009-10-22 14:42:12Z vboxsync $ */ /** @file * DevParallel - Parallel (Port) Device Emulation. * * Contributed by: Alexander Eichner * Based on DevSerial.cpp */ /* * Copyright (C) 2006-2007 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_PARALLEL #include #include #include #include #include #include #include "../Builtins.h" /******************************************************************************* * Defined Constants And Macros * *******************************************************************************/ #define PARALLEL_SAVED_STATE_VERSION 1 /* defines for accessing the register bits */ #define LPT_STATUS_BUSY 0x80 #define LPT_STATUS_ACK 0x40 #define LPT_STATUS_PAPER_OUT 0x20 #define LPT_STATUS_SELECT_IN 0x10 #define LPT_STATUS_ERROR 0x08 #define LPT_STATUS_IRQ 0x04 #define LPT_STATUS_BIT1 0x02 /* reserved (only for completeness) */ #define LPT_STATUS_EPP_TIMEOUT 0x01 #define LPT_CONTROL_BIT7 0x80 /* reserved (only for completeness) */ #define LPT_CONTROL_BIT6 0x40 /* reserved (only for completeness) */ #define LPT_CONTROL_ENABLE_BIDIRECT 0x20 #define LPT_CONTROL_ENABLE_IRQ_VIA_ACK 0x10 #define LPT_CONTROL_SELECT_PRINTER 0x08 #define LPT_CONTROL_RESET 0x04 #define LPT_CONTROL_AUTO_LINEFEED 0x02 #define LPT_CONTROL_STROBE 0x01 /** mode defines for the extended control register */ #define LPT_ECP_ECR_CHIPMODE_MASK 0xe0 #define LPT_ECP_ECR_CHIPMODE_GET_BITS(reg) ((reg) >> 5) #define LPT_ECP_ECR_CHIPMODE_SET_BITS(val) ((val) << 5) #define LPT_ECP_ECR_CHIPMODE_CONFIGURATION 0x07 #define LPT_ECP_ECR_CHIPMODE_FIFO_TEST 0x06 #define LPT_ECP_ECR_CHIPMODE_RESERVED 0x05 #define LPT_ECP_ECR_CHIPMODE_EPP 0x04 #define LPT_ECP_ECR_CHIPMODE_ECP_FIFO 0x03 #define LPT_ECP_ECR_CHIPMODE_PP_FIFO 0x02 #define LPT_ECP_ECR_CHIPMODE_BYTE 0x01 #define LPT_ECP_ECR_CHIPMODE_COMPAT 0x00 /** FIFO status bits in extended control register */ #define LPT_ECP_ECR_FIFO_MASK 0x03 #define LPT_ECP_ECR_FIFO_SOME_DATA 0x00 #define LPT_ECP_ECR_FIFO_FULL 0x02 #define LPT_ECP_ECR_FIFO_EMPTY 0x01 #define LPT_ECP_CONFIGA_FIFO_WITDH_MASK 0x70 #define LPT_ECP_CONFIGA_FIFO_WIDTH_GET_BITS(reg) ((reg) >> 4) #define LPT_ECP_CONFIGA_FIFO_WIDTH_SET_BITS(val) ((val) << 4) #define LPT_ECP_CONFIGA_FIFO_WIDTH_16 0x00 #define LPT_ECP_CONFIGA_FIFO_WIDTH_32 0x20 #define LPT_ECP_CONFIGA_FIFO_WIDTH_8 0x10 #define LPT_ECP_FIFO_DEPTH 2 /******************************************************************************* * Structures and Typedefs * *******************************************************************************/ typedef struct ParallelState { /** Access critical section. */ PDMCRITSECT CritSect; /** Pointer to the device instance - R3 Ptr */ PPDMDEVINSR3 pDevInsR3; /** Pointer to the device instance - R0 Ptr */ PPDMDEVINSR0 pDevInsR0; /** Pointer to the device instance - RC Ptr */ PPDMDEVINSRC pDevInsRC; RTRCPTR Alignment0; /**< Alignment. */ /** The base interface. */ PDMIBASE IBase; /** The host device port interface. */ PDMIHOSTPARALLELPORT IHostParallelPort; /** Pointer to the attached base driver. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** Pointer to the attached host device. */ R3PTRTYPE(PPDMIHOSTPARALLELCONNECTOR) pDrvHostParallelConnector; /** Unused event semaphore... */ RTSEMEVENT ReceiveSem; uint8_t reg_data; uint8_t reg_status; uint8_t reg_control; uint8_t reg_epp_addr; uint8_t reg_epp_data; uint8_t reg_ecp_ecr; uint8_t reg_ecp_base_plus_400h; /* has different meanings */ uint8_t reg_ecp_config_b; /** The ECP FIFO implementation*/ uint8_t ecp_fifo[LPT_ECP_FIFO_DEPTH]; uint8_t abAlignemnt[2]; int act_fifo_pos_write; int act_fifo_pos_read; int irq; uint8_t epp_timeout; bool fGCEnabled; bool fR0Enabled; bool afAlignment[1]; uint32_t base; } DEVPARALLELSTATE, *PDEVPARALLELSTATE; typedef DEVPARALLELSTATE ParallelState; #ifndef VBOX_DEVICE_STRUCT_TESTCASE #define PDMIHOSTPARALLELPORT_2_PARALLELSTATE(pInstance) ( (ParallelState *)((uintptr_t)(pInterface) - RT_OFFSETOF(ParallelState, IHostParallelPort)) ) #define PDMIHOSTDEVICEPORT_2_PARALLELSTATE(pInstance) ( (ParallelState *)((uintptr_t)(pInterface) - RT_OFFSETOF(ParallelState, IHostDevicePort)) ) #define PDMIBASE_2_PARALLELSTATE(pInstance) ( (ParallelState *)((uintptr_t)(pInterface) - RT_OFFSETOF(ParallelState, IBase)) ) /******************************************************************************* * Internal Functions * *******************************************************************************/ RT_C_DECLS_BEGIN PDMBOTHCBDECL(int) parallelIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); PDMBOTHCBDECL(int) parallelIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); #if 0 PDMBOTHCBDECL(int) parallelIOPortReadECP(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); PDMBOTHCBDECL(int) parallelIOPortWriteECP(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); #endif RT_C_DECLS_END #ifdef IN_RING3 static void parallel_set_irq(ParallelState *s) { if (s->reg_control & LPT_CONTROL_ENABLE_IRQ_VIA_ACK) { Log(("parallel_update_irq %d 1\n", s->irq)); PDMDevHlpISASetIrqNoWait(s->CTX_SUFF(pDevIns), s->irq, 1); } } static void parallel_clear_irq(ParallelState *s) { Log(("parallel_update_irq %d 0\n", s->irq)); PDMDevHlpISASetIrqNoWait(s->CTX_SUFF(pDevIns), s->irq, 0); } #endif static int parallel_ioport_write(void *opaque, uint32_t addr, uint32_t val) { ParallelState *s = (ParallelState *)opaque; unsigned char ch; addr &= 7; LogFlow(("parallel: write addr=0x%02x val=0x%02x\n", addr, val)); ch = val; switch(addr) { default: case 0: #ifndef IN_RING3 NOREF(ch); return VINF_IOM_HC_IOPORT_WRITE; #else s->reg_data = ch; if (RT_LIKELY(s->pDrvHostParallelConnector)) { Log(("parallel_io_port_write: write 0x%X\n", ch)); size_t cbWrite = 1; int rc = s->pDrvHostParallelConnector->pfnWrite(s->pDrvHostParallelConnector, &ch, &cbWrite); AssertRC(rc); } #endif break; case 1: break; case 2: /* Set the reserved bits to one */ ch |= (LPT_CONTROL_BIT6 | LPT_CONTROL_BIT7); if (ch != s->reg_control) { #ifndef IN_RING3 return VINF_IOM_HC_IOPORT_WRITE; #else int rc = s->pDrvHostParallelConnector->pfnWriteControl(s->pDrvHostParallelConnector, ch); AssertRC(rc); s->reg_control = val; #endif } break; case 3: s->reg_epp_addr = val; break; case 4: s->reg_epp_data = val; break; case 5: break; case 6: break; case 7: break; } return VINF_SUCCESS; } static uint32_t parallel_ioport_read(void *opaque, uint32_t addr, int *pRC) { ParallelState *s = (ParallelState *)opaque; uint32_t ret = ~0U; *pRC = VINF_SUCCESS; addr &= 7; switch(addr) { default: case 0: if (!(s->reg_control & LPT_CONTROL_ENABLE_BIDIRECT)) ret = s->reg_data; else { #ifndef IN_RING3 *pRC = VINF_IOM_HC_IOPORT_READ; #else if (RT_LIKELY(s->pDrvHostParallelConnector)) { size_t cbRead; int rc = s->pDrvHostParallelConnector->pfnRead(s->pDrvHostParallelConnector, &s->reg_data, &cbRead); Log(("parallel_io_port_read: read 0x%X\n", s->reg_data)); AssertRC(rc); } ret = s->reg_data; #endif } break; case 1: #ifndef IN_RING3 *pRC = VINF_IOM_HC_IOPORT_READ; #else if (RT_LIKELY(s->pDrvHostParallelConnector)) { int rc = s->pDrvHostParallelConnector->pfnReadStatus(s->pDrvHostParallelConnector, &s->reg_status); AssertRC(rc); } ret = s->reg_status; parallel_clear_irq(s); #endif break; case 2: ret = s->reg_control; break; case 3: ret = s->reg_epp_addr; break; case 4: ret = s->reg_epp_data; break; case 5: break; case 6: break; case 7: break; } LogFlow(("parallel: read addr=0x%02x val=0x%02x\n", addr, ret)); return ret; } #if 0 static int parallel_ioport_write_ecp(void *opaque, uint32_t addr, uint32_t val) { ParallelState *s = (ParallelState *)opaque; unsigned char ch; addr &= 7; LogFlow(("parallel: write ecp addr=0x%02x val=0x%02x\n", addr, val)); ch = val; switch(addr) { default: case 0: if (LPT_ECP_ECR_CHIPMODE_GET_BITS(s->reg_ecp_ecr) == LPT_ECP_ECR_CHIPMODE_FIFO_TEST) { s->ecp_fifo[s->act_fifo_pos_write] = ch; s->act_fifo_pos_write++; if (s->act_fifo_pos_write < LPT_ECP_FIFO_DEPTH) { /* FIFO has some data (clear both FIFO bits) */ s->reg_ecp_ecr &= ~(LPT_ECP_ECR_FIFO_EMPTY | LPT_ECP_ECR_FIFO_FULL); } else { /* FIFO is full */ /* Clear FIFO empty bit */ s->reg_ecp_ecr &= ~LPT_ECP_ECR_FIFO_EMPTY; /* Set FIFO full bit */ s->reg_ecp_ecr |= LPT_ECP_ECR_FIFO_FULL; s->act_fifo_pos_write = 0; } } else { s->reg_ecp_base_plus_400h = ch; } break; case 1: s->reg_ecp_config_b = ch; break; case 2: /* If we change the mode clear FIFO */ if ((ch & LPT_ECP_ECR_CHIPMODE_MASK) != (s->reg_ecp_ecr & LPT_ECP_ECR_CHIPMODE_MASK)) { /* reset the fifo */ s->act_fifo_pos_write = 0; s->act_fifo_pos_read = 0; /* Set FIFO empty bit */ s->reg_ecp_ecr |= LPT_ECP_ECR_FIFO_EMPTY; /* Clear FIFO full bit */ s->reg_ecp_ecr &= ~LPT_ECP_ECR_FIFO_FULL; } /* Set new mode */ s->reg_ecp_ecr |= LPT_ECP_ECR_CHIPMODE_SET_BITS(LPT_ECP_ECR_CHIPMODE_GET_BITS(ch)); break; case 3: break; case 4: break; case 5: break; case 6: break; case 7: break; } return VINF_SUCCESS; } static uint32_t parallel_ioport_read_ecp(void *opaque, uint32_t addr, int *pRC) { ParallelState *s = (ParallelState *)opaque; uint32_t ret = ~0U; *pRC = VINF_SUCCESS; addr &= 7; switch(addr) { default: case 0: if (LPT_ECP_ECR_CHIPMODE_GET_BITS(s->reg_ecp_ecr) == LPT_ECP_ECR_CHIPMODE_FIFO_TEST) { ret = s->ecp_fifo[s->act_fifo_pos_read]; s->act_fifo_pos_read++; if (s->act_fifo_pos_read == LPT_ECP_FIFO_DEPTH) s->act_fifo_pos_read = 0; /* end of FIFO, start at beginning */ if (s->act_fifo_pos_read == s->act_fifo_pos_write) { /* FIFO is empty */ /* Set FIFO empty bit */ s->reg_ecp_ecr |= LPT_ECP_ECR_FIFO_EMPTY; /* Clear FIFO full bit */ s->reg_ecp_ecr &= ~LPT_ECP_ECR_FIFO_FULL; } else { /* FIFO has some data (clear all FIFO bits) */ s->reg_ecp_ecr &= ~(LPT_ECP_ECR_FIFO_EMPTY | LPT_ECP_ECR_FIFO_FULL); } } else { ret = s->reg_ecp_base_plus_400h; } break; case 1: ret = s->reg_ecp_config_b; break; case 2: ret = s->reg_ecp_ecr; break; case 3: break; case 4: break; case 5: break; case 6: break; case 7: break; } LogFlow(("parallel: read ecp addr=0x%02x val=0x%02x\n", addr, ret)); return ret; } #endif #ifdef IN_RING3 static DECLCALLBACK(int) parallelNotifyInterrupt(PPDMIHOSTPARALLELPORT pInterface) { ParallelState *pThis = PDMIHOSTPARALLELPORT_2_PARALLELSTATE(pInterface); PDMCritSectEnter(&pThis->CritSect, VINF_SUCCESS); parallel_set_irq(pThis); PDMCritSectLeave(&pThis->CritSect); return VINF_SUCCESS; } #endif /* IN_RING3 */ /** * Port I/O Handler for OUT operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) parallelIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState *); int rc = VINF_SUCCESS; if (cb == 1) { rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_HC_IOPORT_WRITE); if (rc == VINF_SUCCESS) { Log2(("%s: port %#06x val %#04x\n", __FUNCTION__, Port, u32)); rc = parallel_ioport_write (pThis, Port, u32); PDMCritSectLeave(&pThis->CritSect); } } else AssertMsgFailed(("Port=%#x cb=%d u32=%#x\n", Port, cb, u32)); return rc; } /** * Port I/O Handler for IN operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) parallelIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState *); int rc = VINF_SUCCESS; if (cb == 1) { rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_HC_IOPORT_READ); if (rc == VINF_SUCCESS) { *pu32 = parallel_ioport_read (pThis, Port, &rc); Log2(("%s: port %#06x val %#04x\n", __FUNCTION__, Port, *pu32)); PDMCritSectLeave(&pThis->CritSect); } } else rc = VERR_IOM_IOPORT_UNUSED; return rc; } #if 0 /** * Port I/O Handler for OUT operations on ECP registers. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) parallelIOPortWriteECP(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState *); int rc = VINF_SUCCESS; if (cb == 1) { rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_HC_IOPORT_WRITE); if (rc == VINF_SUCCESS) { Log2(("%s: ecp port %#06x val %#04x\n", __FUNCTION__, Port, u32)); rc = parallel_ioport_write_ecp (pThis, Port, u32); PDMCritSectLeave(&pThis->CritSect); } } else AssertMsgFailed(("Port=%#x cb=%d u32=%#x\n", Port, cb, u32)); return rc; } /** * Port I/O Handler for IN operations on ECP registers. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) parallelIOPortReadECP(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState *); int rc = VINF_SUCCESS; if (cb == 1) { rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_HC_IOPORT_READ); if (rc == VINF_SUCCESS) { *pu32 = parallel_ioport_read_ecp (pThis, Port, &rc); Log2(("%s: ecp port %#06x val %#04x\n", __FUNCTION__, Port, *pu32)); PDMCritSectLeave(&pThis->CritSect); } } else rc = VERR_IOM_IOPORT_UNUSED; return rc; } #endif #ifdef IN_RING3 /** * @copydoc FNSSMDEVLIVEEXEC */ static DECLCALLBACK(int) parallelLiveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t uPass) { ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState *); SSMR3PutS32(pSSMHandle, pThis->irq); SSMR3PutU32(pSSMHandle, pThis->base); SSMR3PutU32(pSSMHandle, ~0); /* sanity/terminator */ return VINF_SSM_DONT_CALL_AGAIN; } /** * @copydoc FNSSMDEVSAVEEXEC */ static DECLCALLBACK(int) parallelSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle) { ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState *); SSMR3PutU8(pSSMHandle, pThis->reg_data); SSMR3PutU8(pSSMHandle, pThis->reg_status); SSMR3PutU8(pSSMHandle, pThis->reg_control); parallelLiveExec(pDevIns, pSSMHandle, 0); return VINF_SUCCESS; } /** * @copydoc FNSSMDEVLOADEXEC */ static DECLCALLBACK(int) parallelLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t uVersion, uint32_t uPass) { ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState *); AssertMsgReturn(uVersion == PARALLEL_SAVED_STATE_VERSION, ("%d\n", uVersion), VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION); Assert(uPass == SSM_PASS_FINAL); NOREF(uPass); if (uPass == SSM_PASS_FINAL) { SSMR3GetU8(pSSMHandle, &pThis->reg_data); SSMR3GetU8(pSSMHandle, &pThis->reg_status); SSMR3GetU8(pSSMHandle, &pThis->reg_control); } /* the config */ int32_t iIrq; SSMR3GetS32(pSSMHandle, &iIrq); uint32_t uIoBase; SSMR3GetU32(pSSMHandle, &uIoBase); uint32_t u32; int rc = SSMR3GetU32(pSSMHandle, &u32); if (RT_FAILURE(rc)) return rc; AssertMsgReturn(u32 == ~0U, ("%#x\n", u32), VERR_SSM_DATA_UNIT_FORMAT_CHANGED); if (pThis->irq != iIrq) { LogRel(("Parallel: IRQ changed: config=%#x state=%#x\n", pThis->irq, iIrq)); return VERR_SSM_LOAD_CONFIG_MISMATCH; } if (pThis->base != uIoBase) { LogRel(("Parallel: IOBase changed: config=%#x state=%#x\n", pThis->base, uIoBase)); return VERR_SSM_LOAD_CONFIG_MISMATCH; } /* not necessary... but it doesn't harm. */ pThis->pDevInsR3 = pDevIns; pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); return VINF_SUCCESS; } /** * @copydoc FNPDMDEVRELOCATE */ static DECLCALLBACK(void) parallelRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta) { ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState *); pThis->pDevInsRC += offDelta; } /** @copyfrom PIBASE::pfnqueryInterface */ static DECLCALLBACK(void *) parallelQueryInterface(PPDMIBASE pInterface, PDMINTERFACE enmInterface) { ParallelState *pThis = PDMIBASE_2_PARALLELSTATE(pInterface); switch (enmInterface) { case PDMINTERFACE_BASE: return &pThis->IBase; case PDMINTERFACE_HOST_PARALLEL_PORT: return &pThis->IHostParallelPort; default: return NULL; } } /** * Destruct a device instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @returns VBox status. * @param pDevIns The device instance data. */ static DECLCALLBACK(int) parallelDestruct(PPDMDEVINS pDevIns) { ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState *); PDMR3CritSectDelete(&pThis->CritSect); RTSemEventDestroy(pThis->ReceiveSem); return VINF_SUCCESS; } /** * Construct a device instance for a VM. * * @returns VBox status. * @param pDevIns The device instance data. * If the registration structure is needed, pDevIns->pDevReg points to it. * @param iInstance Instance number. Use this to figure out which registers and such to use. * The device number is also found in pDevIns->iInstance, but since it's * likely to be freqently used PDM passes it as parameter. * @param pCfgHandle Configuration node handle for the device. Use this to obtain the configuration * of the device instance. It's also found in pDevIns->pCfgHandle, but like * iInstance it's expected to be used a bit in this function. */ static DECLCALLBACK(int) parallelConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfgHandle) { int rc; ParallelState *pThis = PDMINS_2_DATA(pDevIns, ParallelState*); Assert(iInstance < 4); /* * Init the data so parallelDestruct doesn't choke. */ pThis->pDevInsR3 = pDevIns; pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pThis->ReceiveSem = NIL_RTSEMEVENT; /* IBase */ pThis->IBase.pfnQueryInterface = parallelQueryInterface; /* IHostParallelPort */ pThis->IHostParallelPort.pfnNotifyInterrupt = parallelNotifyInterrupt; /* Init parallel state */ pThis->reg_data = 0; pThis->reg_ecp_ecr = LPT_ECP_ECR_CHIPMODE_COMPAT | LPT_ECP_ECR_FIFO_EMPTY; pThis->act_fifo_pos_read = 0; pThis->act_fifo_pos_write = 0; /* * Validate and read the configuration. */ if (!CFGMR3AreValuesValid(pCfgHandle, "IRQ\0" "IOBase\0" "GCEnabled\0" "R0Enabled\0")) return PDMDEV_SET_ERROR(pDevIns, VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES, N_("Configuration error: Unknown config key")); rc = CFGMR3QueryBoolDef(pCfgHandle, "GCEnabled", &pThis->fGCEnabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"GCEnabled\" value")); rc = CFGMR3QueryBoolDef(pCfgHandle, "R0Enabled", &pThis->fR0Enabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"R0Enabled\" value")); uint8_t irq_lvl; rc = CFGMR3QueryU8Def(pCfgHandle, "IRQ", &irq_lvl, 7); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"IRQ\" value")); uint16_t io_base; rc = CFGMR3QueryU16Def(pCfgHandle, "IOBase", &io_base, 0x378); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"IOBase\" value")); Log(("parallelConstruct instance %d iobase=%04x irq=%d\n", iInstance, io_base, irq_lvl)); pThis->irq = irq_lvl; pThis->base = io_base; /* * Initialize critical section and event semaphore. * This must of course be done before attaching drivers or anything else which can call us back.. */ char szName[24]; RTStrPrintf(szName, sizeof(szName), "Parallel#%d", iInstance); rc = PDMDevHlpCritSectInit(pDevIns, &pThis->CritSect, szName); if (RT_FAILURE(rc)) return rc; rc = RTSemEventCreate(&pThis->ReceiveSem); if (RT_FAILURE(rc)) return rc; /* * Register the I/O ports and saved state. */ rc = PDMDevHlpIOPortRegister(pDevIns, io_base, 8, 0, parallelIOPortWrite, parallelIOPortRead, NULL, NULL, "PARALLEL"); if (RT_FAILURE(rc)) return rc; #if 0 /* register ecp registers */ rc = PDMDevHlpIOPortRegister(pDevIns, io_base+0x400, 8, 0, parallelIOPortWriteECP, parallelIOPortReadECP, NULL, NULL, "PARALLEL ECP"); if (RT_FAILURE(rc)) return rc; #endif if (pThis->fGCEnabled) { rc = PDMDevHlpIOPortRegisterGC(pDevIns, io_base, 8, 0, "parallelIOPortWrite", "parallelIOPortRead", NULL, NULL, "Parallel"); if (RT_FAILURE(rc)) return rc; #if 0 rc = PDMDevHlpIOPortRegisterGC(pDevIns, io_base+0x400, 8, 0, "parallelIOPortWriteECP", "parallelIOPortReadECP", NULL, NULL, "Parallel Ecp"); if (RT_FAILURE(rc)) return rc; #endif } if (pThis->fR0Enabled) { rc = PDMDevHlpIOPortRegisterR0(pDevIns, io_base, 8, 0, "parallelIOPortWrite", "parallelIOPortRead", NULL, NULL, "Parallel"); if (RT_FAILURE(rc)) return rc; #if 0 rc = PDMDevHlpIOPortRegisterR0(pDevIns, io_base+0x400, 8, 0, "parallelIOPortWriteECP", "parallelIOPortReadECP", NULL, NULL, "Parallel Ecp"); if (RT_FAILURE(rc)) return rc; #endif } rc = PDMDevHlpSSMRegister3(pDevIns, PARALLEL_SAVED_STATE_VERSION, sizeof(*pThis), parallelLiveExec, parallelSaveExec, parallelLoadExec); if (RT_FAILURE(rc)) return rc; /* * Attach the parallel port driver and get the interfaces. * For now no run-time changes are supported. */ rc = PDMDevHlpDriverAttach(pDevIns, 0, &pThis->IBase, &pThis->pDrvBase, "Parallel Host"); if (RT_SUCCESS(rc)) { pThis->pDrvHostParallelConnector = (PDMIHOSTPARALLELCONNECTOR *)pThis->pDrvBase->pfnQueryInterface(pThis->pDrvBase, PDMINTERFACE_HOST_PARALLEL_CONNECTOR); if (!pThis->pDrvHostParallelConnector) { AssertMsgFailed(("Configuration error: instance %d has no host parallel interface!\n", iInstance)); return VERR_PDM_MISSING_INTERFACE; } /** @todo provide read notification interface!!!! */ } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { pThis->pDrvBase = NULL; pThis->pDrvHostParallelConnector = NULL; LogRel(("Parallel%d: no unit\n", iInstance)); } else { AssertMsgFailed(("Parallel%d: Failed to attach to host driver. rc=%Rrc\n", iInstance, rc)); return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("Parallel device %d cannot attach to host driver"), iInstance); } /* Set compatibility mode */ pThis->pDrvHostParallelConnector->pfnSetMode(pThis->pDrvHostParallelConnector, PDM_PARALLEL_PORT_MODE_COMPAT); /* Get status of control register */ pThis->pDrvHostParallelConnector->pfnReadControl(pThis->pDrvHostParallelConnector, &pThis->reg_control); return VINF_SUCCESS; } /** * The device registration structure. */ const PDMDEVREG g_DeviceParallelPort = { /* u32Version */ PDM_DEVREG_VERSION, /* szDeviceName */ "parallel", /* szRCMod */ "VBoxDDGC.gc", /* szR0Mod */ "VBoxDDR0.r0", /* pszDescription */ "Parallel Communication Port", /* fFlags */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0, /* fClass */ PDM_DEVREG_CLASS_PARALLEL, /* cMaxInstances */ 1, /* cbInstance */ sizeof(ParallelState), /* pfnConstruct */ parallelConstruct, /* pfnDestruct */ parallelDestruct, /* pfnRelocate */ parallelRelocate, /* pfnIOCtl */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ NULL, /* pfnSuspend */ NULL, /* pfnResume */ NULL, /* pfnAttach */ NULL, /* pfnDetach */ NULL, /* pfnQueryInterface. */ NULL, /* pfnInitComplete */ NULL, /* pfnPowerOff */ NULL, /* pfnSoftReset */ NULL, /* u32VersionEnd */ PDM_DEVREG_VERSION }; #endif /* IN_RING3 */ #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */