/* $Id: DevSerial.cpp 37466 2011-06-15 12:44:16Z vboxsync $ */ /** @file * DevSerial - 16550A UART emulation. * (taken from hw/serial.c 2010/05/15 with modifications) */ /* * Copyright (C) 2006-2010 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /* * This code is based on: * * QEMU 16550A UART emulation * * Copyright (c) 2003-2004 Fabrice Bellard * Copyright (c) 2008 Citrix Systems, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_SERIAL #include #include #include #include #include #include #include "VBoxDD.h" #undef VBOX_SERIAL_PCI /* The PCI variant has lots of problems: wrong IRQ line and wrong IO base assigned. */ #ifdef VBOX_SERIAL_PCI # include #endif /* VBOX_SERIAL_PCI */ /******************************************************************************* * Defined Constants And Macros * *******************************************************************************/ #define SERIAL_SAVED_STATE_VERSION_16450 3 #define SERIAL_SAVED_STATE_VERSION 4 #define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ #define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ #define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ #define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ #define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ #define UART_IIR_NO_INT 0x01 /* No interrupts pending */ #define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ #define UART_IIR_MSI 0x00 /* Modem status interrupt */ #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ #define UART_IIR_RDI 0x04 /* Receiver data interrupt */ #define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ #define UART_IIR_CTI 0x0C /* Character Timeout Indication */ #define UART_IIR_FENF 0x80 /* Fifo enabled, but not functioning */ #define UART_IIR_FE 0xC0 /* Fifo enabled */ /* * These are the definitions for the Modem Control Register */ #define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ #define UART_MCR_OUT2 0x08 /* Out2 complement */ #define UART_MCR_OUT1 0x04 /* Out1 complement */ #define UART_MCR_RTS 0x02 /* RTS complement */ #define UART_MCR_DTR 0x01 /* DTR complement */ /* * These are the definitions for the Modem Status Register */ #define UART_MSR_DCD 0x80 /* Data Carrier Detect */ #define UART_MSR_RI 0x40 /* Ring Indicator */ #define UART_MSR_DSR 0x20 /* Data Set Ready */ #define UART_MSR_CTS 0x10 /* Clear to Send */ #define UART_MSR_DDCD 0x08 /* Delta DCD */ #define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ #define UART_MSR_DDSR 0x02 /* Delta DSR */ #define UART_MSR_DCTS 0x01 /* Delta CTS */ #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ #define UART_LSR_TEMT 0x40 /* Transmitter empty */ #define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ #define UART_LSR_BI 0x10 /* Break interrupt indicator */ #define UART_LSR_FE 0x08 /* Frame error indicator */ #define UART_LSR_PE 0x04 /* Parity error indicator */ #define UART_LSR_OE 0x02 /* Overrun error indicator */ #define UART_LSR_DR 0x01 /* Receiver data ready */ #define UART_LSR_INT_ANY 0x1E /* Any of the lsr-interrupt-triggering status bits */ /* * Interrupt trigger levels. * The byte-counts are for 16550A - in newer UARTs the byte-count for each ITL is higher. */ #define UART_FCR_ITL_1 0x00 /* 1 byte ITL */ #define UART_FCR_ITL_2 0x40 /* 4 bytes ITL */ #define UART_FCR_ITL_3 0x80 /* 8 bytes ITL */ #define UART_FCR_ITL_4 0xC0 /* 14 bytes ITL */ #define UART_FCR_DMS 0x08 /* DMA Mode Select */ #define UART_FCR_XFR 0x04 /* XMIT Fifo Reset */ #define UART_FCR_RFR 0x02 /* RCVR Fifo Reset */ #define UART_FCR_FE 0x01 /* FIFO Enable */ #define UART_FIFO_LENGTH 16 /* 16550A Fifo Length */ #define XMIT_FIFO 0 #define RECV_FIFO 1 #define MIN_XMIT_RETRY 16 #define MAX_XMIT_RETRY_TIME 1 /* max time (in seconds) for retrying the character xmit before dropping it */ /******************************************************************************* * Structures and Typedefs * *******************************************************************************/ struct SerialFifo { uint8_t data[UART_FIFO_LENGTH]; uint8_t count; uint8_t itl; uint8_t tail; uint8_t head; }; /** * Serial device. * * @implements PDMIBASE * @implements PDMICHARPORT */ struct SerialState { /** Access critical section. */ PDMCRITSECT CritSect; /** Pointer to the device instance - R3 Ptr. */ PPDMDEVINSR3 pDevInsR3; /** Pointer to the device instance - R0 Ptr. */ PPDMDEVINSR0 pDevInsR0; /** Pointer to the device instance - RC Ptr. */ PPDMDEVINSRC pDevInsRC; /** Alignment. */ RTRCPTR Alignment0; /** LUN\#0: The base interface. */ PDMIBASE IBase; /** LUN\#0: The character port interface. */ PDMICHARPORT ICharPort; /** Pointer to the attached base driver. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** Pointer to the attached character driver. */ R3PTRTYPE(PPDMICHARCONNECTOR) pDrvChar; RTSEMEVENT ReceiveSem; PTMTIMERR3 fifo_timeout_timer; PTMTIMERR3 transmit_timerR3; PTMTIMERR0 transmit_timerR0; /* currently not used */ PTMTIMERRC transmit_timerRC; /* currently not used */ RTRCPTR Alignment1; SerialFifo recv_fifo; SerialFifo xmit_fifo; uint32_t base; uint16_t divider; uint16_t Alignment2[1]; uint8_t rbr; /**< receive register */ uint8_t thr; /**< transmit holding register */ uint8_t tsr; /**< transmit shift register */ uint8_t ier; /**< interrupt enable register */ uint8_t iir; /**< interrupt identification register, R/O */ uint8_t lcr; /**< line control register */ uint8_t mcr; /**< modem control register */ uint8_t lsr; /**< line status register, R/O */ uint8_t msr; /**< modem status register, R/O */ uint8_t scr; /**< scratch register */ uint8_t fcr; /**< fifo control register */ uint8_t fcr_vmstate; /* NOTE: this hidden state is necessary for tx irq generation as it can be reset while reading iir */ int thr_ipending; int timeout_ipending; int irq; int last_break_enable; /** Counter for retrying xmit */ int tsr_retry; int tsr_retry_bound; /**< number of retries before dropping a character */ int tsr_retry_bound_max; /**< maximum possible tsr_retry_bound value that can be set while dynamic bound adjustment */ int tsr_retry_bound_min; /**< minimum possible tsr_retry_bound value that can be set while dynamic bound adjustment */ bool msr_changed; bool fGCEnabled; bool fR0Enabled; bool fYieldOnLSRRead; bool volatile fRecvWaiting; bool f16550AEnabled; bool Alignment3[6]; /** Time it takes to transmit a character */ uint64_t char_transmit_time; #ifdef VBOX_SERIAL_PCI PCIDEVICE dev; #endif /* VBOX_SERIAL_PCI */ }; #ifndef VBOX_DEVICE_STRUCT_TESTCASE #ifdef VBOX_SERIAL_PCI #define PCIDEV_2_SERIALSTATE(pPciDev) ( (SerialState *)((uintptr_t)(pPciDev) - RT_OFFSETOF(SerialState, dev)) ) #endif /* VBOX_SERIAL_PCI */ #define PDMIBASE_2_SERIALSTATE(pInstance) ( (SerialState *)((uintptr_t)(pInterface) - RT_OFFSETOF(SerialState, IBase)) ) #define PDMICHARPORT_2_SERIALSTATE(pInstance) ( (SerialState *)((uintptr_t)(pInterface) - RT_OFFSETOF(SerialState, ICharPort)) ) /******************************************************************************* * Internal Functions * *******************************************************************************/ RT_C_DECLS_BEGIN PDMBOTHCBDECL(int) serialIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); PDMBOTHCBDECL(int) serialIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); RT_C_DECLS_END #ifdef IN_RING3 static int serial_can_receive(SerialState *s); static void serial_receive(void *opaque, const uint8_t *buf, int size); static void fifo_clear(SerialState *s, int fifo) { SerialFifo *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; memset(f->data, 0, UART_FIFO_LENGTH); f->count = 0; f->head = 0; f->tail = 0; } static int fifo_put(SerialState *s, int fifo, uint8_t chr) { SerialFifo *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; /* Receive overruns do not overwrite FIFO contents. */ if (fifo == XMIT_FIFO || f->count < UART_FIFO_LENGTH) { f->data[f->head++] = chr; if (f->head == UART_FIFO_LENGTH) f->head = 0; } if (f->count < UART_FIFO_LENGTH) f->count++; else if (fifo == XMIT_FIFO) /* need to at least adjust tail to maintain pipe state consistency */ ++f->tail; else if (fifo == RECV_FIFO) s->lsr |= UART_LSR_OE; return 1; } static uint8_t fifo_get(SerialState *s, int fifo) { SerialFifo *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; uint8_t c; if (f->count == 0) return 0; c = f->data[f->tail++]; if (f->tail == UART_FIFO_LENGTH) f->tail = 0; f->count--; return c; } static void serial_update_irq(SerialState *s) { uint8_t tmp_iir = UART_IIR_NO_INT; if ( (s->ier & UART_IER_RLSI) && (s->lsr & UART_LSR_INT_ANY)) { tmp_iir = UART_IIR_RLSI; } else if ((s->ier & UART_IER_RDI) && s->timeout_ipending) { /* Note that(s->ier & UART_IER_RDI) can mask this interrupt, * this is not in the specification but is observed on existing * hardware. */ tmp_iir = UART_IIR_CTI; } else if ( (s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR) && ( !(s->fcr & UART_FCR_FE) || s->recv_fifo.count >= s->recv_fifo.itl)) { tmp_iir = UART_IIR_RDI; } else if ( (s->ier & UART_IER_THRI) && s->thr_ipending) { tmp_iir = UART_IIR_THRI; } else if ( (s->ier & UART_IER_MSI) && (s->msr & UART_MSR_ANY_DELTA)) { tmp_iir = UART_IIR_MSI; } s->iir = tmp_iir | (s->iir & 0xF0); /** XXX only call the SetIrq function if the state really changes! */ if (tmp_iir != UART_IIR_NO_INT) { Log(("serial_update_irq %d 1\n", s->irq)); # ifdef VBOX_SERIAL_PCI PDMDevHlpPCISetIrqNoWait(s->CTX_SUFF(pDevIns), 0, 1); # else /* !VBOX_SERIAL_PCI */ PDMDevHlpISASetIrqNoWait(s->CTX_SUFF(pDevIns), s->irq, 1); # endif /* !VBOX_SERIAL_PCI */ } else { Log(("serial_update_irq %d 0\n", s->irq)); # ifdef VBOX_SERIAL_PCI PDMDevHlpPCISetIrqNoWait(s->CTX_SUFF(pDevIns), 0, 0); # else /* !VBOX_SERIAL_PCI */ PDMDevHlpISASetIrqNoWait(s->CTX_SUFF(pDevIns), s->irq, 0); # endif /* !VBOX_SERIAL_PCI */ } } static void serial_tsr_retry_update_parameters(SerialState *s, uint64_t tf) { s->tsr_retry_bound_max = RT_MAX((tf * MAX_XMIT_RETRY_TIME) / s->char_transmit_time, MIN_XMIT_RETRY); s->tsr_retry_bound_min = RT_MAX(s->tsr_retry_bound_max / (1000 * MAX_XMIT_RETRY_TIME), MIN_XMIT_RETRY); /* for simplicity just reset to max retry count */ s->tsr_retry_bound = s->tsr_retry_bound_max; } static void serial_tsr_retry_bound_reached(SerialState *s) { /* this is most likely means we have some backend connection issues */ /* decrement the retry bound */ s->tsr_retry_bound = RT_MAX(s->tsr_retry_bound / (10 * MAX_XMIT_RETRY_TIME), s->tsr_retry_bound_min); } static void serial_tsr_retry_succeeded(SerialState *s) { /* success means we have a backend connection working OK, * set retry bound to its maximum value */ s->tsr_retry_bound = s->tsr_retry_bound_max; } static void serial_update_parameters(SerialState *s) { int speed, parity, data_bits, stop_bits, frame_size; if (s->divider == 0) return; frame_size = 1; if (s->lcr & 0x08) { frame_size++; if (s->lcr & 0x10) parity = 'E'; else parity = 'O'; } else { parity = 'N'; } if (s->lcr & 0x04) stop_bits = 2; else stop_bits = 1; data_bits = (s->lcr & 0x03) + 5; frame_size += data_bits + stop_bits; speed = 115200 / s->divider; uint64_t tf = TMTimerGetFreq(CTX_SUFF(s->transmit_timer)); s->char_transmit_time = (tf / speed) * frame_size; serial_tsr_retry_update_parameters(s, tf); Log(("speed=%d parity=%c data=%d stop=%d\n", speed, parity, data_bits, stop_bits)); if (RT_LIKELY(s->pDrvChar)) s->pDrvChar->pfnSetParameters(s->pDrvChar, speed, parity, data_bits, stop_bits); } static void serial_xmit(void *opaque, bool bRetryXmit) { SerialState *s = (SerialState*)opaque; if (s->tsr_retry <= 0) { if (s->fcr & UART_FCR_FE) { s->tsr = fifo_get(s, XMIT_FIFO); if (!s->xmit_fifo.count) s->lsr |= UART_LSR_THRE; } else { s->tsr = s->thr; s->lsr |= UART_LSR_THRE; } } if (s->mcr & UART_MCR_LOOP) { /* in loopback mode, say that we just received a char */ serial_receive(s, &s->tsr, 1); } else if ( RT_LIKELY(s->pDrvChar) && RT_FAILURE(s->pDrvChar->pfnWrite(s->pDrvChar, &s->tsr, 1))) { if ((s->tsr_retry >= 0) && ((!bRetryXmit) || (s->tsr_retry <= s->tsr_retry_bound))) { if (!s->tsr_retry) s->tsr_retry = 1; /* make sure the retry state is always set */ else if (bRetryXmit) /* do not increase the retry count if the retry is actually caused by next char write */ s->tsr_retry++; TMTimerSet(CTX_SUFF(s->transmit_timer), TMTimerGet(CTX_SUFF(s->transmit_timer)) + s->char_transmit_time * 4); return; } else { /* drop this character. */ s->tsr_retry = 0; serial_tsr_retry_bound_reached(s); } } else { s->tsr_retry = 0; serial_tsr_retry_succeeded(s); } if (!(s->lsr & UART_LSR_THRE)) TMTimerSet(CTX_SUFF(s->transmit_timer), TMTimerGet(CTX_SUFF(s->transmit_timer)) + s->char_transmit_time); if (s->lsr & UART_LSR_THRE) { s->lsr |= UART_LSR_TEMT; s->thr_ipending = 1; serial_update_irq(s); } } #endif /* IN_RING3 */ static int serial_ioport_write(SerialState *s, uint32_t addr, uint32_t val) { addr &= 7; #ifndef IN_RING3 NOREF(s); return VINF_IOM_HC_IOPORT_WRITE; #else switch(addr) { default: case 0: if (s->lcr & UART_LCR_DLAB) { s->divider = (s->divider & 0xff00) | val; serial_update_parameters(s); } else { s->thr = (uint8_t) val; if (s->fcr & UART_FCR_FE) { fifo_put(s, XMIT_FIFO, s->thr); s->thr_ipending = 0; s->lsr &= ~UART_LSR_TEMT; s->lsr &= ~UART_LSR_THRE; serial_update_irq(s); } else { s->thr_ipending = 0; s->lsr &= ~UART_LSR_THRE; serial_update_irq(s); } serial_xmit(s, false); } break; case 1: if (s->lcr & UART_LCR_DLAB) { s->divider = (s->divider & 0x00ff) | (val << 8); serial_update_parameters(s); } else { s->ier = val & 0x0f; if (s->lsr & UART_LSR_THRE) { s->thr_ipending = 1; serial_update_irq(s); } } break; case 2: if (!s->f16550AEnabled) break; val = val & 0xFF; if (s->fcr == val) break; /* Did the enable/disable flag change? If so, make sure FIFOs get flushed */ if ((val ^ s->fcr) & UART_FCR_FE) val |= UART_FCR_XFR | UART_FCR_RFR; /* FIFO clear */ if (val & UART_FCR_RFR) { TMTimerStop(s->fifo_timeout_timer); s->timeout_ipending = 0; fifo_clear(s, RECV_FIFO); } if (val & UART_FCR_XFR) { fifo_clear(s, XMIT_FIFO); } if (val & UART_FCR_FE) { s->iir |= UART_IIR_FE; /* Set RECV_FIFO trigger Level */ switch (val & 0xC0) { case UART_FCR_ITL_1: s->recv_fifo.itl = 1; break; case UART_FCR_ITL_2: s->recv_fifo.itl = 4; break; case UART_FCR_ITL_3: s->recv_fifo.itl = 8; break; case UART_FCR_ITL_4: s->recv_fifo.itl = 14; break; } } else s->iir &= ~UART_IIR_FE; /* Set fcr - or at least the bits in it that are supposed to "stick" */ s->fcr = val & 0xC9; serial_update_irq(s); break; case 3: { int break_enable; s->lcr = val; serial_update_parameters(s); break_enable = (val >> 6) & 1; if (break_enable != s->last_break_enable) { s->last_break_enable = break_enable; if (RT_LIKELY(s->pDrvChar)) { Log(("serial_ioport_write: Set break %d\n", break_enable)); int rc = s->pDrvChar->pfnSetBreak(s->pDrvChar, !!break_enable); AssertRC(rc); } } } break; case 4: s->mcr = val & 0x1f; if (RT_LIKELY(s->pDrvChar)) { int rc = s->pDrvChar->pfnSetModemLines(s->pDrvChar, !!(s->mcr & UART_MCR_RTS), !!(s->mcr & UART_MCR_DTR)); AssertRC(rc); } break; case 5: break; case 6: break; case 7: s->scr = val; break; } return VINF_SUCCESS; #endif } static uint32_t serial_ioport_read(void *opaque, uint32_t addr, int *pRC) { SerialState *s = (SerialState *)opaque; uint32_t ret = ~0U; *pRC = VINF_SUCCESS; addr &= 7; switch(addr) { default: case 0: if (s->lcr & UART_LCR_DLAB) { /* DLAB == 1: divisor latch (LS) */ ret = s->divider & 0xff; } else { #ifndef IN_RING3 *pRC = VINF_IOM_HC_IOPORT_READ; #else if (s->fcr & UART_FCR_FE) { ret = fifo_get(s, RECV_FIFO); if (s->recv_fifo.count == 0) s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); else TMTimerSet(s->fifo_timeout_timer, TMTimerGet(s->fifo_timeout_timer) + s->char_transmit_time * 4); s->timeout_ipending = 0; } else { Log(("serial_io_port_read: read 0x%X\n", s->rbr)); ret = s->rbr; s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); } serial_update_irq(s); if (s->fRecvWaiting) { s->fRecvWaiting = false; int rc = RTSemEventSignal(s->ReceiveSem); AssertRC(rc); } #endif } break; case 1: if (s->lcr & UART_LCR_DLAB) { /* DLAB == 1: divisor latch (MS) */ ret = (s->divider >> 8) & 0xff; } else { ret = s->ier; } break; case 2: #ifndef IN_RING3 *pRC = VINF_IOM_HC_IOPORT_READ; #else ret = s->iir; if ((ret & UART_IIR_ID) == UART_IIR_THRI) { s->thr_ipending = 0; serial_update_irq(s); } /* reset msr changed bit */ s->msr_changed = false; #endif break; case 3: ret = s->lcr; break; case 4: ret = s->mcr; break; case 5: if ((s->lsr & UART_LSR_DR) == 0 && s->fYieldOnLSRRead) { /* No data available and yielding is enabled, so yield in ring3. */ #ifndef IN_RING3 *pRC = VINF_IOM_HC_IOPORT_READ; break; #else RTThreadYield (); #endif } ret = s->lsr; /* Clear break and overrun interrupts */ if (s->lsr & (UART_LSR_BI|UART_LSR_OE)) { #ifndef IN_RING3 *pRC = VINF_IOM_HC_IOPORT_READ; #else s->lsr &= ~(UART_LSR_BI|UART_LSR_OE); serial_update_irq(s); #endif } break; case 6: if (s->mcr & UART_MCR_LOOP) { /* in loopback, the modem output pins are connected to the inputs */ ret = (s->mcr & 0x0c) << 4; ret |= (s->mcr & 0x02) << 3; ret |= (s->mcr & 0x01) << 5; } else { ret = s->msr; /* Clear delta bits & msr int after read, if they were set */ if (s->msr & UART_MSR_ANY_DELTA) { #ifndef IN_RING3 *pRC = VINF_IOM_HC_IOPORT_READ; #else s->msr &= 0xF0; serial_update_irq(s); #endif } } break; case 7: ret = s->scr; break; } return ret; } #ifdef IN_RING3 static int serial_can_receive(SerialState *s) { if (s->fcr & UART_FCR_FE) { if (s->recv_fifo.count < UART_FIFO_LENGTH) return (s->recv_fifo.count <= s->recv_fifo.itl) ? s->recv_fifo.itl - s->recv_fifo.count : 1; else return 0; } else { return !(s->lsr & UART_LSR_DR); } } static void serial_receive(void *opaque, const uint8_t *buf, int size) { SerialState *s = (SerialState*)opaque; if (s->fcr & UART_FCR_FE) { int i; for (i = 0; i < size; i++) { fifo_put(s, RECV_FIFO, buf[i]); } s->lsr |= UART_LSR_DR; /* call the timeout receive callback in 4 char transmit time */ TMTimerSet(s->fifo_timeout_timer, TMTimerGet(s->fifo_timeout_timer) + s->char_transmit_time * 4); } else { if (s->lsr & UART_LSR_DR) s->lsr |= UART_LSR_OE; s->rbr = buf[0]; s->lsr |= UART_LSR_DR; } serial_update_irq(s); } /** @copydoc PDMICHARPORT::pfnNotifyRead */ static DECLCALLBACK(int) serialNotifyRead(PPDMICHARPORT pInterface, const void *pvBuf, size_t *pcbRead) { SerialState *pThis = PDMICHARPORT_2_SERIALSTATE(pInterface); const uint8_t *pu8Buf = (const uint8_t*)pvBuf; size_t cbRead = *pcbRead; PDMCritSectEnter(&pThis->CritSect, VERR_PERMISSION_DENIED); for (; cbRead > 0; cbRead--, pu8Buf++) { if (!serial_can_receive(pThis)) { /* If we cannot receive then wait for not more than 250ms. If we still * cannot receive then the new character will either overwrite rbr * or it will be dropped at fifo_put(). */ pThis->fRecvWaiting = true; PDMCritSectLeave(&pThis->CritSect); int rc = RTSemEventWait(pThis->ReceiveSem, 250); PDMCritSectEnter(&pThis->CritSect, VERR_PERMISSION_DENIED); } serial_receive(pThis, &pu8Buf[0], 1); } PDMCritSectLeave(&pThis->CritSect); return VINF_SUCCESS; } /** @copydoc PDMICHARPORT::pfnNotifyStatusLinesChanged */ static DECLCALLBACK(int) serialNotifyStatusLinesChanged(PPDMICHARPORT pInterface, uint32_t newStatusLines) { SerialState *pThis = PDMICHARPORT_2_SERIALSTATE(pInterface); uint8_t newMsr = 0; Log(("%s: pInterface=%p newStatusLines=%u\n", __FUNCTION__, pInterface, newStatusLines)); PDMCritSectEnter(&pThis->CritSect, VERR_PERMISSION_DENIED); /* Set new states. */ if (newStatusLines & PDMICHARPORT_STATUS_LINES_DCD) newMsr |= UART_MSR_DCD; if (newStatusLines & PDMICHARPORT_STATUS_LINES_RI) newMsr |= UART_MSR_RI; if (newStatusLines & PDMICHARPORT_STATUS_LINES_DSR) newMsr |= UART_MSR_DSR; if (newStatusLines & PDMICHARPORT_STATUS_LINES_CTS) newMsr |= UART_MSR_CTS; /* Compare the old and the new states and set the delta bits accordingly. */ if ((newMsr & UART_MSR_DCD) != (pThis->msr & UART_MSR_DCD)) newMsr |= UART_MSR_DDCD; if ((newMsr & UART_MSR_RI) == 1 && (pThis->msr & UART_MSR_RI) == 0) newMsr |= UART_MSR_TERI; if ((newMsr & UART_MSR_DSR) != (pThis->msr & UART_MSR_DSR)) newMsr |= UART_MSR_DDSR; if ((newMsr & UART_MSR_CTS) != (pThis->msr & UART_MSR_CTS)) newMsr |= UART_MSR_DCTS; pThis->msr = newMsr; pThis->msr_changed = true; serial_update_irq(pThis); PDMCritSectLeave(&pThis->CritSect); return VINF_SUCCESS; } /** @copydoc PDMICHARPORT::pfnNotifyBufferFull */ static DECLCALLBACK(int) serialNotifyBufferFull(PPDMICHARPORT pInterface, bool fFull) { return VINF_SUCCESS; } /** @copydoc PDMICHARPORT::pfnNotifyBreak */ static DECLCALLBACK(int) serialNotifyBreak(PPDMICHARPORT pInterface) { SerialState *pThis = PDMICHARPORT_2_SERIALSTATE(pInterface); Log(("%s: pInterface=%p\n", __FUNCTION__, pInterface)); PDMCritSectEnter(&pThis->CritSect, VERR_PERMISSION_DENIED); pThis->lsr |= UART_LSR_BI; serial_update_irq(pThis); PDMCritSectLeave(&pThis->CritSect); return VINF_SUCCESS; } /** * Fifo timer functions. */ static DECLCALLBACK(void) serialFifoTimer(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser) { SerialState *pThis = (SerialState *)pvUser; Assert(PDMCritSectIsOwner(&pThis->CritSect)); if (pThis->recv_fifo.count) { pThis->timeout_ipending = 1; serial_update_irq(pThis); } } /** * Transmit timer function. * Just retry to transmit a character. * * @param pTimer The timer handle. * @param pDevIns The device instance. * @param pvUser The user pointer. */ static DECLCALLBACK(void) serialTransmitTimer(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser) { SerialState *pThis = (SerialState *)pvUser; Assert(PDMCritSectIsOwner(&pThis->CritSect)); serial_xmit(pThis, true); } /** * Reset the serial device. * * @param pDevIns The device instance. */ static DECLCALLBACK(void) serialReset(PPDMDEVINS pDevIns) { SerialState *s = PDMINS_2_DATA(pDevIns, SerialState *); s->rbr = 0; s->ier = 0; s->iir = UART_IIR_NO_INT; s->lcr = 0; s->lsr = UART_LSR_TEMT | UART_LSR_THRE; s->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS; /* Default to 9600 baud, 1 start bit, 8 data bits, 1 stop bit, no parity. */ s->divider = 0x0C; s->mcr = UART_MCR_OUT2; s->scr = 0; s->tsr_retry = 0; uint64_t tf = TMTimerGetFreq(CTX_SUFF(s->transmit_timer)); s->char_transmit_time = (tf / 9600) * 10; serial_tsr_retry_update_parameters(s, tf); fifo_clear(s, RECV_FIFO); fifo_clear(s, XMIT_FIFO); s->thr_ipending = 0; s->last_break_enable = 0; # ifdef VBOX_SERIAL_PCI PDMDevHlpPCISetIrqNoWait(s->CTX_SUFF(pDevIns), 0, 0); # else /* !VBOX_SERIAL_PCI */ PDMDevHlpISASetIrqNoWait(s->CTX_SUFF(pDevIns), s->irq, 0); # endif /* !VBOX_SERIAL_PCI */ } #endif /* IN_RING3 */ /** * Port I/O Handler for OUT operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) serialIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { SerialState *pThis = PDMINS_2_DATA(pDevIns, SerialState *); int rc; Assert(PDMCritSectIsOwner(&pThis->CritSect)); if (cb == 1) { Log2(("%s: port %#06x val %#04x\n", __FUNCTION__, Port, u32)); rc = serial_ioport_write(pThis, Port, u32); } else { AssertMsgFailed(("Port=%#x cb=%d u32=%#x\n", Port, cb, u32)); rc = VINF_SUCCESS; } return rc; } /** * Port I/O Handler for IN operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) serialIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { SerialState *pThis = PDMINS_2_DATA(pDevIns, SerialState *); int rc; Assert(PDMCritSectIsOwner(&pThis->CritSect)); if (cb == 1) { *pu32 = serial_ioport_read(pThis, Port, &rc); Log2(("%s: port %#06x val %#04x\n", __FUNCTION__, Port, *pu32)); } else rc = VERR_IOM_IOPORT_UNUSED; return rc; } #ifdef IN_RING3 /** * @copydoc FNSSMDEVLIVEEXEC */ static DECLCALLBACK(int) serialLiveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uPass) { SerialState *pThis = PDMINS_2_DATA(pDevIns, SerialState *); SSMR3PutS32(pSSM, pThis->irq); SSMR3PutU32(pSSM, pThis->base); return VINF_SSM_DONT_CALL_AGAIN; } /** * @copydoc FNSSMDEVSAVEEXEC */ static DECLCALLBACK(int) serialSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { SerialState *pThis = PDMINS_2_DATA(pDevIns, SerialState *); SSMR3PutU16(pSSM, pThis->divider); SSMR3PutU8(pSSM, pThis->rbr); SSMR3PutU8(pSSM, pThis->ier); SSMR3PutU8(pSSM, pThis->lcr); SSMR3PutU8(pSSM, pThis->mcr); SSMR3PutU8(pSSM, pThis->lsr); SSMR3PutU8(pSSM, pThis->msr); SSMR3PutU8(pSSM, pThis->scr); SSMR3PutU8(pSSM, pThis->fcr); /* 16550A */ SSMR3PutS32(pSSM, pThis->thr_ipending); SSMR3PutS32(pSSM, pThis->irq); SSMR3PutS32(pSSM, pThis->last_break_enable); SSMR3PutU32(pSSM, pThis->base); SSMR3PutBool(pSSM, pThis->msr_changed); /* Don't store: * - the content of the FIFO * - tsr_retry */ return SSMR3PutU32(pSSM, ~0); /* sanity/terminator */ } /** * @copydoc FNSSMDEVLOADEXEC */ static DECLCALLBACK(int) serialLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { SerialState *pThis = PDMINS_2_DATA(pDevIns, SerialState *); if (uVersion == SERIAL_SAVED_STATE_VERSION_16450) { pThis->f16550AEnabled = false; LogRel(("Serial#%d: falling back to 16450 mode from load state\n", pDevIns->iInstance)); } else AssertMsgReturn(uVersion == SERIAL_SAVED_STATE_VERSION, ("%d\n", uVersion), VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION); if (uPass == SSM_PASS_FINAL) { SSMR3GetU16(pSSM, &pThis->divider); SSMR3GetU8(pSSM, &pThis->rbr); SSMR3GetU8(pSSM, &pThis->ier); SSMR3GetU8(pSSM, &pThis->lcr); SSMR3GetU8(pSSM, &pThis->mcr); SSMR3GetU8(pSSM, &pThis->lsr); SSMR3GetU8(pSSM, &pThis->msr); SSMR3GetU8(pSSM, &pThis->scr); if (uVersion > SERIAL_SAVED_STATE_VERSION_16450) { SSMR3GetU8(pSSM, &pThis->fcr); } SSMR3GetS32(pSSM, &pThis->thr_ipending); } int32_t iIrq; SSMR3GetS32(pSSM, &iIrq); if (uPass == SSM_PASS_FINAL) SSMR3GetS32(pSSM, &pThis->last_break_enable); uint32_t IOBase; int rc = SSMR3GetU32(pSSM, &IOBase); AssertRCReturn(rc, rc); if ( pThis->irq != iIrq || pThis->base != IOBase) return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("Config mismatch - saved irq=%#x iobase=%#x; configured irq=%#x iobase=%#x"), iIrq, IOBase, pThis->irq, pThis->base); if (uPass == SSM_PASS_FINAL) { SSMR3GetBool(pSSM, &pThis->msr_changed); uint32_t u32; rc = SSMR3GetU32(pSSM, &u32); if (RT_FAILURE(rc)) return rc; AssertMsgReturn(u32 == ~0U, ("%#x\n", u32), VERR_SSM_DATA_UNIT_FORMAT_CHANGED); if ( (pThis->lsr & UART_LSR_DR) || pThis->fRecvWaiting) { pThis->fRecvWaiting = false; rc = RTSemEventSignal(pThis->ReceiveSem); AssertRC(rc); } /* this isn't strictly necessary but cannot hurt... */ pThis->pDevInsR3 = pDevIns; pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); } return VINF_SUCCESS; } /** * @copydoc FNPDMDEVRELOCATE */ static DECLCALLBACK(void) serialRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta) { SerialState *pThis = PDMINS_2_DATA(pDevIns, SerialState *); pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pThis->transmit_timerRC = TMTimerRCPtr(pThis->transmit_timerR3); } #ifdef VBOX_SERIAL_PCI static DECLCALLBACK(int) serialIOPortRegionMap(PPCIDEVICE pPciDev, /* unsigned */ int iRegion, RTGCPHYS GCPhysAddress, uint32_t cb, PCIADDRESSSPACE enmType) { SerialState *pThis = PCIDEV_2_SERIALSTATE(pPciDev); int rc = VINF_SUCCESS; Assert(enmType == PCI_ADDRESS_SPACE_IO); Assert(iRegion == 0); Assert(cb == 8); AssertMsg(RT_ALIGN(GCPhysAddress, 8) == GCPhysAddress, ("Expected 8 byte alignment. GCPhysAddress=%#x\n", GCPhysAddress)); pThis->base = (RTIOPORT)GCPhysAddress; LogRel(("Serial#%d: mapping I/O at %#06x\n", pThis->pDevIns->iInstance, pThis->base)); /* * Register our port IO handlers. */ rc = PDMDevHlpIOPortRegister(pPciDev->pDevIns, (RTIOPORT)GCPhysAddress, 8, (void *)pThis, serial_io_write, serial_io_read, NULL, NULL, "SERIAL"); AssertRC(rc); return rc; } #endif /* VBOX_SERIAL_PCI */ /** * @interface_method_impl{PDMIBASE, pfnQueryInterface} */ static DECLCALLBACK(void *) serialQueryInterface(PPDMIBASE pInterface, const char *pszIID) { SerialState *pThis = PDMIBASE_2_SERIALSTATE(pInterface); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMICHARPORT, &pThis->ICharPort); return NULL; } /** * Destruct a device instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @returns VBox status. * @param pDevIns The device instance data. */ static DECLCALLBACK(int) serialDestruct(PPDMDEVINS pDevIns) { SerialState *pThis = PDMINS_2_DATA(pDevIns, SerialState *); PDMDEV_CHECK_VERSIONS_RETURN_QUIET(pDevIns); RTSemEventDestroy(pThis->ReceiveSem); pThis->ReceiveSem = NIL_RTSEMEVENT; PDMR3CritSectDelete(&pThis->CritSect); return VINF_SUCCESS; } /** * @interface_method_impl{PDMDEVREG, pfnConstruct} */ static DECLCALLBACK(int) serialConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { int rc; SerialState *pThis = PDMINS_2_DATA(pDevIns, SerialState*); uint16_t io_base; uint8_t irq_lvl; Assert(iInstance < 4); PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); /* * Initialize the instance data. * (Do this early or the destructor might choke on something!) */ pThis->pDevInsR3 = pDevIns; pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); /* IBase */ pThis->IBase.pfnQueryInterface = serialQueryInterface; /* ICharPort */ pThis->ICharPort.pfnNotifyRead = serialNotifyRead; pThis->ICharPort.pfnNotifyStatusLinesChanged = serialNotifyStatusLinesChanged; pThis->ICharPort.pfnNotifyBufferFull = serialNotifyBufferFull; pThis->ICharPort.pfnNotifyBreak = serialNotifyBreak; #ifdef VBOX_SERIAL_PCI /* the PCI device */ pThis->dev.config[0x00] = 0xee; /* Vendor: ??? */ pThis->dev.config[0x01] = 0x80; pThis->dev.config[0x02] = 0x01; /* Device: ??? */ pThis->dev.config[0x03] = 0x01; pThis->dev.config[0x04] = PCI_COMMAND_IOACCESS; pThis->dev.config[0x09] = 0x01; /* Programming interface: 16450 */ pThis->dev.config[0x0a] = 0x00; /* Subclass: Serial controller */ pThis->dev.config[0x0b] = 0x07; /* Class: Communication controller */ pThis->dev.config[0x0e] = 0x00; /* Header type: standard */ pThis->dev.config[0x3c] = irq_lvl; /* preconfigure IRQ number (0 = autoconfig)*/ pThis->dev.config[0x3d] = 1; /* interrupt pin 0 */ #endif /* VBOX_SERIAL_PCI */ /* * Validate and read the configuration. */ if (!CFGMR3AreValuesValid(pCfg, "IRQ\0" "IOBase\0" "GCEnabled\0" "R0Enabled\0" "YieldOnLSRRead\0" "Enable16550A\0" )) { AssertMsgFailed(("serialConstruct Invalid configuration values\n")); return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES; } rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &pThis->fGCEnabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"GCEnabled\" value")); rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &pThis->fR0Enabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"R0Enabled\" value")); rc = CFGMR3QueryBoolDef(pCfg, "YieldOnLSRRead", &pThis->fYieldOnLSRRead, false); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"YieldOnLSRRead\" value")); rc = CFGMR3QueryU8(pCfg, "IRQ", &irq_lvl); if (rc == VERR_CFGM_VALUE_NOT_FOUND) { /* Provide sensible defaults. */ if (iInstance == 0) irq_lvl = 4; else if (iInstance == 1) irq_lvl = 3; else AssertReleaseFailed(); /* irq_lvl is undefined. */ } else if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"IRQ\" value")); rc = CFGMR3QueryU16(pCfg, "IOBase", &io_base); if (rc == VERR_CFGM_VALUE_NOT_FOUND) { if (iInstance == 0) io_base = 0x3f8; else if (iInstance == 1) io_base = 0x2f8; else AssertReleaseFailed(); /* io_base is undefined */ } else if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"IOBase\" value")); Log(("DevSerial: instance %d iobase=%04x irq=%d\n", iInstance, io_base, irq_lvl)); rc = CFGMR3QueryBoolDef(pCfg, "Enable16550A", &pThis->f16550AEnabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"Enable16550A\" value")); pThis->irq = irq_lvl; #ifdef VBOX_SERIAL_PCI pThis->base = -1; #else pThis->base = io_base; #endif LogRel(("Serial#%d: emulating %s\n", pDevIns->iInstance, pThis->f16550AEnabled ? "16550A" : "16450")); /* * Initialize critical section and the semaphore. Change the default * critical section to ours so that TM and IOM will enter it before * calling us. * * Note! This must of be done BEFORE creating timers, registering I/O ports * and other things which might pick up the default CS or end up * calling back into the device. */ rc = PDMDevHlpCritSectInit(pDevIns, &pThis->CritSect, RT_SRC_POS, "Serial#%u", iInstance); AssertRCReturn(rc, rc); rc = PDMDevHlpSetDeviceCritSect(pDevIns, &pThis->CritSect); AssertRCReturn(rc, rc); rc = RTSemEventCreate(&pThis->ReceiveSem); AssertRCReturn(rc, rc); /* * Create the timers. */ rc = PDMDevHlpTMTimerCreate(pDevIns, TMCLOCK_VIRTUAL, serialFifoTimer, pThis, TMTIMER_FLAGS_DEFAULT_CRIT_SECT, "Serial Fifo Timer", &pThis->fifo_timeout_timer); AssertRCReturn(rc, rc); rc = PDMDevHlpTMTimerCreate(pDevIns, TMCLOCK_VIRTUAL, serialTransmitTimer, pThis, TMTIMER_FLAGS_DEFAULT_CRIT_SECT, "Serial Transmit Timer", &pThis->transmit_timerR3); AssertRCReturn(rc, rc); pThis->transmit_timerR0 = TMTimerR0Ptr(pThis->transmit_timerR3); pThis->transmit_timerRC = TMTimerRCPtr(pThis->transmit_timerR3); serialReset(pDevIns); #ifdef VBOX_SERIAL_PCI /* * Register the PCI Device and region. */ rc = PDMDevHlpPCIRegister(pDevIns, &pThis->dev); if (RT_FAILURE(rc)) return rc; rc = PDMDevHlpPCIIORegionRegister(pDevIns, 0, 8, PCI_ADDRESS_SPACE_IO, serialIOPortRegionMap); if (RT_FAILURE(rc)) return rc; #else /* !VBOX_SERIAL_PCI */ /* * Register the I/O ports. */ pThis->base = io_base; rc = PDMDevHlpIOPortRegister(pDevIns, io_base, 8, 0, serialIOPortWrite, serialIOPortRead, NULL, NULL, "SERIAL"); if (RT_FAILURE(rc)) return rc; if (pThis->fGCEnabled) { rc = PDMDevHlpIOPortRegisterRC(pDevIns, io_base, 8, 0, "serialIOPortWrite", "serialIOPortRead", NULL, NULL, "Serial"); if (RT_FAILURE(rc)) return rc; } if (pThis->fR0Enabled) { rc = PDMDevHlpIOPortRegisterR0(pDevIns, io_base, 8, 0, "serialIOPortWrite", "serialIOPortRead", NULL, NULL, "Serial"); if (RT_FAILURE(rc)) return rc; } #endif /* !VBOX_SERIAL_PCI */ /* * Saved state. */ rc = PDMDevHlpSSMRegister3(pDevIns, SERIAL_SAVED_STATE_VERSION, sizeof (*pThis), serialLiveExec, serialSaveExec, serialLoadExec); if (RT_FAILURE(rc)) return rc; /* * Attach the char driver and get the interfaces. * For now no run-time changes are supported. */ rc = PDMDevHlpDriverAttach(pDevIns, 0, &pThis->IBase, &pThis->pDrvBase, "Serial Char"); if (RT_SUCCESS(rc)) { pThis->pDrvChar = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMICHARCONNECTOR); if (!pThis->pDrvChar) { AssertLogRelMsgFailed(("Configuration error: instance %d has no char interface!\n", iInstance)); return VERR_PDM_MISSING_INTERFACE; } /** @todo provide read notification interface!!!! */ } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { pThis->pDrvBase = NULL; pThis->pDrvChar = NULL; LogRel(("Serial%d: no unit\n", iInstance)); } else { AssertLogRelMsgFailed(("Serial%d: Failed to attach to char driver. rc=%Rrc\n", iInstance, rc)); /* Don't call VMSetError here as we assume that the driver already set an appropriate error */ return rc; } return VINF_SUCCESS; } /** * The device registration structure. */ const PDMDEVREG g_DeviceSerialPort = { /* u32Version */ PDM_DEVREG_VERSION, /* szName */ "serial", /* szRCMod */ "VBoxDDGC.gc", /* szR0Mod */ "VBoxDDR0.r0", /* pszDescription */ "Serial Communication Port", /* fFlags */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0, /* fClass */ PDM_DEVREG_CLASS_SERIAL, /* cMaxInstances */ UINT32_MAX, /* cbInstance */ sizeof(SerialState), /* pfnConstruct */ serialConstruct, /* pfnDestruct */ serialDestruct, /* pfnRelocate */ serialRelocate, /* pfnIOCtl */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ serialReset, /* pfnSuspend */ NULL, /* pfnResume */ NULL, /* pfnAttach */ NULL, /* pfnDetach */ NULL, /* pfnQueryInterface. */ NULL, /* pfnInitComplete */ NULL, /* pfnPowerOff */ NULL, /* pfnSoftReset */ NULL, /* u32VersionEnd */ PDM_DEVREG_VERSION }; #endif /* IN_RING3 */ #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */