/** @file * * VBox serial device: * Serial communication port driver */ /* * Copyright (C) 2006-2007 innotek GmbH * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /* * This code is based on: * * QEMU 16450 UART emulation * * Copyright (c) 2003-2004 Fabrice Bellard * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. * */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_SERIAL #include #include #include #include #include #include #include "Builtins.h" #undef VBOX_SERIAL_PCI /* The PCI variant has lots of problems: wrong IRQ line and wrong IO base assigned. */ #ifdef VBOX_SERIAL_PCI #include #endif /* VBOX_SERIAL_PCI */ #define SERIAL_SAVED_STATE_VERSION 3 #define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ #define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ #define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ #define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ #define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ #define UART_IIR_NO_INT 0x01 /* No interrupts pending */ #define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ #define UART_IIR_MSI 0x00 /* Modem status interrupt */ #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ #define UART_IIR_RDI 0x04 /* Receiver data interrupt */ #define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ /* * These are the definitions for the Modem Control Register */ #define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ #define UART_MCR_OUT2 0x08 /* Out2 complement */ #define UART_MCR_OUT1 0x04 /* Out1 complement */ #define UART_MCR_RTS 0x02 /* RTS complement */ #define UART_MCR_DTR 0x01 /* DTR complement */ /* * These are the definitions for the Modem Status Register */ #define UART_MSR_DCD 0x80 /* Data Carrier Detect */ #define UART_MSR_RI 0x40 /* Ring Indicator */ #define UART_MSR_DSR 0x20 /* Data Set Ready */ #define UART_MSR_CTS 0x10 /* Clear to Send */ #define UART_MSR_DDCD 0x08 /* Delta DCD */ #define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ #define UART_MSR_DDSR 0x02 /* Delta DSR */ #define UART_MSR_DCTS 0x01 /* Delta CTS */ #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ #define UART_LSR_TEMT 0x40 /* Transmitter empty */ #define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ #define UART_LSR_BI 0x10 /* Break interrupt indicator */ #define UART_LSR_FE 0x08 /* Frame error indicator */ #define UART_LSR_PE 0x04 /* Parity error indicator */ #define UART_LSR_OE 0x02 /* Overrun error indicator */ #define UART_LSR_DR 0x01 /* Receiver data ready */ struct SerialState { /** Access critical section. */ PDMCRITSECT CritSect; /** Pointer to the device instance. */ R3PTRTYPE(PPDMDEVINS) pDevInsHC; /** Pointer to the device instance. */ GCPTRTYPE(PPDMDEVINS) pDevInsGC; #if HC_ARCH_BITS == 64 && GC_ARCH_BITS != 64 RTGCPTR Alignment0; #endif /** The base interface. */ PDMIBASE IBase; /** The character port interface. */ PDMICHARPORT ICharPort; /** Pointer to the attached base driver. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** Pointer to the attached character driver. */ R3PTRTYPE(PPDMICHAR) pDrvChar; uint16_t divider; uint16_t auAlignment[3]; uint8_t rbr; /* receive register */ uint8_t ier; uint8_t iir; /* read only */ uint8_t lcr; uint8_t mcr; uint8_t lsr; /* read only */ uint8_t msr; /* read only */ uint8_t scr; /* NOTE: this hidden state is necessary for tx irq generation as it can be reset while reading iir */ int thr_ipending; int irq; bool msr_changed; bool fGCEnabled; bool fR0Enabled; bool afAlignment[5]; RTSEMEVENT ReceiveSem; int last_break_enable; uint32_t base; #ifdef VBOX_SERIAL_PCI PCIDEVICE dev; #endif /* VBOX_SERIAL_PCI */ }; #ifndef VBOX_DEVICE_STRUCT_TESTCASE #ifdef VBOX_SERIAL_PCI #define PCIDEV_2_SERIALSTATE(pPciDev) ( (SerialState *)((uintptr_t)(pPciDev) - RT_OFFSETOF(SerialState, dev)) ) #endif /* VBOX_SERIAL_PCI */ #define PDMIBASE_2_SERIALSTATE(pInstance) ( (SerialState *)((uintptr_t)(pInterface) - RT_OFFSETOF(SerialState, IBase)) ) #define PDMICHARPORT_2_SERIALSTATE(pInstance) ( (SerialState *)((uintptr_t)(pInterface) - RT_OFFSETOF(SerialState, ICharPort)) ) __BEGIN_DECLS PDMBOTHCBDECL(int) serialIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); PDMBOTHCBDECL(int) serialIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); __END_DECLS #ifdef IN_RING3 static void serial_update_irq(SerialState *s) { if ((s->lsr & UART_LSR_DR) && (s->ier & UART_IER_RDI)) { s->iir = UART_IIR_RDI; } else if (s->thr_ipending && (s->ier & UART_IER_THRI)) { s->iir = UART_IIR_THRI; } else if (s->msr_changed && (s->ier & UART_IER_RLSI)) { s->iir = UART_IIR_RLSI; } else { s->iir = UART_IIR_NO_INT; } if (s->iir != UART_IIR_NO_INT) { Log(("serial_update_irq %d 1\n", s->irq)); #ifdef VBOX_SERIAL_PCI PDMDevHlpPCISetIrqNoWait(CTXSUFF(s->pDevIns), 0, 1); #else /* !VBOX_SERIAL_PCI */ PDMDevHlpISASetIrqNoWait(CTXSUFF(s->pDevIns), s->irq, 1); #endif /* !VBOX_SERIAL_PCI */ } else { Log(("serial_update_irq %d 0\n", s->irq)); #ifdef VBOX_SERIAL_PCI PDMDevHlpPCISetIrqNoWait(CTXSUFF(s->pDevIns), 0, 0); #else /* !VBOX_SERIAL_PCI */ PDMDevHlpISASetIrqNoWait(CTXSUFF(s->pDevIns), s->irq, 0); #endif /* !VBOX_SERIAL_PCI */ } } static void serial_update_parameters(SerialState *s) { int speed, parity, data_bits, stop_bits; if (s->lcr & 0x08) { if (s->lcr & 0x10) parity = 'E'; else parity = 'O'; } else { parity = 'N'; } if (s->lcr & 0x04) stop_bits = 2; else stop_bits = 1; data_bits = (s->lcr & 0x03) + 5; if (s->divider == 0) return; speed = 115200 / s->divider; Log(("speed=%d parity=%c data=%d stop=%d\n", speed, parity, data_bits, stop_bits)); if (RT_LIKELY(s->pDrvChar)) s->pDrvChar->pfnSetParameters(s->pDrvChar, speed, parity, data_bits, stop_bits); } #endif static int serial_ioport_write(void *opaque, uint32_t addr, uint32_t val) { SerialState *s = (SerialState *)opaque; unsigned char ch; addr &= 7; LogFlow(("serial: write addr=0x%02x val=0x%02x\n", addr, val)); #ifndef IN_RING3 NOREF(ch); NOREF(s); return VINF_IOM_HC_IOPORT_WRITE; #else switch(addr) { default: case 0: if (s->lcr & UART_LCR_DLAB) { s->divider = (s->divider & 0xff00) | val; serial_update_parameters(s); } else { s->thr_ipending = 0; s->lsr &= ~UART_LSR_THRE; serial_update_irq(s); ch = val; if (RT_LIKELY(s->pDrvChar)) { Log(("serial_io_port_write: write 0x%X\n", ch)); int rc = s->pDrvChar->pfnWrite(s->pDrvChar, &ch, 1); AssertRC(rc); } s->thr_ipending = 1; s->lsr |= UART_LSR_THRE; s->lsr |= UART_LSR_TEMT; serial_update_irq(s); } break; case 1: if (s->lcr & UART_LCR_DLAB) { s->divider = (s->divider & 0x00ff) | (val << 8); serial_update_parameters(s); } else { s->ier = val & 0x0f; if (s->lsr & UART_LSR_THRE) { s->thr_ipending = 1; } serial_update_irq(s); } break; case 2: break; case 3: { int break_enable; if (s->lcr != val) { s->lcr = val; serial_update_parameters(s); } break_enable = (val >> 6) & 1; if (break_enable != s->last_break_enable) { s->last_break_enable = break_enable; } } break; case 4: s->mcr = val & 0x1f; if (RT_LIKELY(s->pDrvChar)) { int rc = s->pDrvChar->pfnSetModemLines(s->pDrvChar, !!(s->mcr & UART_MCR_RTS), !!(s->mcr & UART_MCR_DTR)); AssertRC(rc); } break; case 5: break; case 6: break; case 7: s->scr = val; break; } return VINF_SUCCESS; #endif } static uint32_t serial_ioport_read(void *opaque, uint32_t addr, int *pRC) { SerialState *s = (SerialState *)opaque; uint32_t ret = ~0U; *pRC = VINF_SUCCESS; addr &= 7; switch(addr) { default: case 0: if (s->lcr & UART_LCR_DLAB) { ret = s->divider & 0xff; } else { #ifndef IN_RING3 *pRC = VINF_IOM_HC_IOPORT_READ; #else Log(("serial_io_port_read: read 0x%X\n", s->rbr)); ret = s->rbr; s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); serial_update_irq(s); { int rc = RTSemEventSignal(s->ReceiveSem); AssertRC(rc); } #endif } break; case 1: if (s->lcr & UART_LCR_DLAB) { ret = (s->divider >> 8) & 0xff; } else { ret = s->ier; } break; case 2: #ifndef IN_RING3 *pRC = VINF_IOM_HC_IOPORT_READ; #else ret = s->iir; /* reset THR pending bit */ if ((ret & 0x7) == UART_IIR_THRI) s->thr_ipending = 0; /* reset msr changed bit */ s->msr_changed = false; serial_update_irq(s); #endif break; case 3: ret = s->lcr; break; case 4: ret = s->mcr; break; case 5: ret = s->lsr; break; case 6: if (s->mcr & UART_MCR_LOOP) { /* in loopback, the modem output pins are connected to the inputs */ ret = (s->mcr & 0x0c) << 4; ret |= (s->mcr & 0x02) << 3; ret |= (s->mcr & 0x01) << 5; } else { ret = s->msr; /* Reset delta bits. */ s->msr &= ~UART_MSR_ANY_DELTA; } break; case 7: ret = s->scr; break; } LogFlow(("serial: read addr=0x%02x val=0x%02x\n", addr, ret)); return ret; } #ifdef IN_RING3 static DECLCALLBACK(int) serialNotifyRead(PPDMICHARPORT pInterface, const void *pvBuf, size_t *pcbRead) { SerialState *pData = PDMICHARPORT_2_SERIALSTATE(pInterface); int rc; Assert(*pcbRead != 0); PDMCritSectEnter(&pData->CritSect, VERR_PERMISSION_DENIED); if (pData->lsr & UART_LSR_DR) { /* If a character is still in the read queue, then wait for it to be emptied. */ PDMCritSectLeave(&pData->CritSect); rc = RTSemEventWait(pData->ReceiveSem, 250); if (VBOX_FAILURE(rc)) return rc; PDMCritSectEnter(&pData->CritSect, VERR_PERMISSION_DENIED); } if (!(pData->lsr & UART_LSR_DR)) { pData->rbr = *(const char *)pvBuf; pData->lsr |= UART_LSR_DR; serial_update_irq(pData); *pcbRead = 1; rc = VINF_SUCCESS; } else rc = VERR_TIMEOUT; PDMCritSectLeave(&pData->CritSect); return rc; } static DECLCALLBACK(int) serialNotifyStatusLinesChanged(PPDMICHARPORT pInterface, uint32_t newStatusLines) { SerialState *pData = PDMICHARPORT_2_SERIALSTATE(pInterface); uint8_t newMsr = 0; Log(("%s: pInterface=%p newStatusLines=%u\n", __FUNCTION__, pInterface, newStatusLines)); PDMCritSectEnter(&pData->CritSect, VERR_PERMISSION_DENIED); /* Set new states. */ if (newStatusLines & PDM_ICHAR_STATUS_LINES_DCD) newMsr |= UART_MSR_DCD; if (newStatusLines & PDM_ICHAR_STATUS_LINES_RI) newMsr |= UART_MSR_RI; if (newStatusLines & PDM_ICHAR_STATUS_LINES_DSR) newMsr |= UART_MSR_DSR; if (newStatusLines & PDM_ICHAR_STATUS_LINES_CTS) newMsr |= UART_MSR_CTS; /* Compare the old and the new states and set the delta bits accordingly. */ if ((newMsr & UART_MSR_DCD) != (pData->msr & UART_MSR_DCD)) newMsr |= UART_MSR_DDCD; if ((newMsr & UART_MSR_RI) == 1 && (pData->msr & UART_MSR_RI) == 0) newMsr |= UART_MSR_TERI; if ((newMsr & UART_MSR_DSR) != (pData->msr & UART_MSR_DSR)) newMsr |= UART_MSR_DDSR; if ((newMsr & UART_MSR_CTS) != (pData->msr & UART_MSR_CTS)) newMsr |= UART_MSR_DCTS; pData->msr = newMsr; pData->msr_changed = true; serial_update_irq(pData); PDMCritSectLeave(&pData->CritSect); return VINF_SUCCESS; } #endif /* IN_RING3 */ /** * Port I/O Handler for OUT operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) serialIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { SerialState *pData = PDMINS2DATA(pDevIns, SerialState *); int rc = VINF_SUCCESS; if (cb == 1) { rc = PDMCritSectEnter(&pData->CritSect, VINF_IOM_HC_IOPORT_WRITE); if (rc == VINF_SUCCESS) { Log2(("%s: port %#06x val %#04x\n", __FUNCTION__, Port, u32)); rc = serial_ioport_write (pData, Port, u32); PDMCritSectLeave(&pData->CritSect); } } else AssertMsgFailed(("Port=%#x cb=%d u32=%#x\n", Port, cb, u32)); return rc; } /** * Port I/O Handler for IN operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the IN operation. * @param u32 The value to output. * @param cb The value size in bytes. */ PDMBOTHCBDECL(int) serialIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { SerialState *pData = PDMINS2DATA(pDevIns, SerialState *); int rc = VINF_SUCCESS; if (cb == 1) { rc = PDMCritSectEnter(&pData->CritSect, VINF_IOM_HC_IOPORT_READ); if (rc == VINF_SUCCESS) { *pu32 = serial_ioport_read (pData, Port, &rc); Log2(("%s: port %#06x val %#04x\n", __FUNCTION__, Port, *pu32)); PDMCritSectLeave(&pData->CritSect); } } else rc = VERR_IOM_IOPORT_UNUSED; return rc; } #ifdef IN_RING3 /** * Saves a state of the serial port device. * * @returns VBox status code. * @param pDevIns The device instance. * @param pSSMHandle The handle to save the state to. */ static DECLCALLBACK(int) serialSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle) { SerialState *pData = PDMINS2DATA(pDevIns, SerialState *); SSMR3PutU16(pSSMHandle, pData->divider); SSMR3PutU8(pSSMHandle, pData->rbr); SSMR3PutU8(pSSMHandle, pData->ier); SSMR3PutU8(pSSMHandle, pData->lcr); SSMR3PutU8(pSSMHandle, pData->mcr); SSMR3PutU8(pSSMHandle, pData->lsr); SSMR3PutU8(pSSMHandle, pData->msr); SSMR3PutU8(pSSMHandle, pData->scr); SSMR3PutS32(pSSMHandle, pData->thr_ipending); SSMR3PutS32(pSSMHandle, pData->irq); SSMR3PutS32(pSSMHandle, pData->last_break_enable); SSMR3PutU32(pSSMHandle, pData->base); SSMR3PutBool(pSSMHandle, pData->msr_changed); return SSMR3PutU32(pSSMHandle, ~0); /* sanity/terminator */ } /** * Loads a saved serial port device state. * * @returns VBox status code. * @param pDevIns The device instance. * @param pSSMHandle The handle to the saved state. * @param u32Version The data unit version number. */ static DECLCALLBACK(int) serialLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t u32Version) { int rc; uint32_t u32; SerialState *pData = PDMINS2DATA(pDevIns, SerialState *); if (u32Version != SERIAL_SAVED_STATE_VERSION) { AssertMsgFailed(("u32Version=%d\n", u32Version)); return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; } SSMR3GetU16(pSSMHandle, &pData->divider); SSMR3GetU8(pSSMHandle, &pData->rbr); SSMR3GetU8(pSSMHandle, &pData->ier); SSMR3GetU8(pSSMHandle, &pData->lcr); SSMR3GetU8(pSSMHandle, &pData->mcr); SSMR3GetU8(pSSMHandle, &pData->lsr); SSMR3GetU8(pSSMHandle, &pData->msr); SSMR3GetU8(pSSMHandle, &pData->scr); SSMR3GetS32(pSSMHandle, &pData->thr_ipending); SSMR3GetS32(pSSMHandle, &pData->irq); SSMR3GetS32(pSSMHandle, &pData->last_break_enable); SSMR3GetU32(pSSMHandle, &pData->base); SSMR3GetBool(pSSMHandle, &pData->msr_changed); rc = SSMR3GetU32(pSSMHandle, &u32); if (VBOX_FAILURE(rc)) return rc; if (u32 != ~0U) { AssertMsgFailed(("u32=%#x expected ~0\n", u32)); return VERR_SSM_DATA_UNIT_FORMAT_CHANGED; } /* Be careful with pointers in the structure; they are not preserved * in the saved state. */ if (pData->lsr & UART_LSR_DR) { int rc = RTSemEventSignal(pData->ReceiveSem); AssertRC(rc); } pData->pDevInsHC = pDevIns; pData->pDevInsGC = PDMDEVINS_2_GCPTR(pDevIns); return VINF_SUCCESS; } /** * @copydoc FNPDMDEVRELOCATE */ static DECLCALLBACK(void) serialRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta) { SerialState *pData = PDMINS2DATA(pDevIns, SerialState *); pData->pDevInsGC = PDMDEVINS_2_GCPTR(pDevIns); } #ifdef VBOX_SERIAL_PCI static DECLCALLBACK(int) serialIOPortRegionMap(PPCIDEVICE pPciDev, /* unsigned */ int iRegion, RTGCPHYS GCPhysAddress, uint32_t cb, PCIADDRESSSPACE enmType) { SerialState *pData = PCIDEV_2_SERIALSTATE(pPciDev); int rc = VINF_SUCCESS; Assert(enmType == PCI_ADDRESS_SPACE_IO); Assert(iRegion == 0); Assert(cb == 8); AssertMsg(RT_ALIGN(GCPhysAddress, 8) == GCPhysAddress, ("Expected 8 byte alignment. GCPhysAddress=%#x\n", GCPhysAddress)); pData->base = (RTIOPORT)GCPhysAddress; LogRel(("Serial#%d: mapping I/O at %#06x\n", pData->pDevIns->iInstance, pData->base)); /* * Register our port IO handlers. */ rc = PDMDevHlpIOPortRegister(pPciDev->pDevIns, (RTIOPORT)GCPhysAddress, 8, (void *)pData, serial_io_write, serial_io_read, NULL, NULL, "SERIAL"); AssertRC(rc); return rc; } #endif /* VBOX_SERIAL_PCI */ /** @copyfrom PIBASE::pfnqueryInterface */ static DECLCALLBACK(void *) serialQueryInterface(PPDMIBASE pInterface, PDMINTERFACE enmInterface) { SerialState *pData = PDMIBASE_2_SERIALSTATE(pInterface); switch (enmInterface) { case PDMINTERFACE_BASE: return &pData->IBase; case PDMINTERFACE_CHAR_PORT: return &pData->ICharPort; default: return NULL; } } /** * Destruct a device instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @returns VBox status. * @param pDevIns The device instance data. */ static DECLCALLBACK(int) serialDestruct(PPDMDEVINS pDevIns) { SerialState *pData = PDMINS2DATA(pDevIns, SerialState *); RTSemEventDestroy(pData->ReceiveSem); pData->ReceiveSem = NIL_RTSEMEVENT; PDMR3CritSectDelete(&pData->CritSect); return VINF_SUCCESS; } /** * Construct a device instance for a VM. * * @returns VBox status. * @param pDevIns The device instance data. * If the registration structure is needed, pDevIns->pDevReg points to it. * @param iInstance Instance number. Use this to figure out which registers and such to use. * The device number is also found in pDevIns->iInstance, but since it's * likely to be freqently used PDM passes it as parameter. * @param pCfgHandle Configuration node handle for the device. Use this to obtain the configuration * of the device instance. It's also found in pDevIns->pCfgHandle, but like * iInstance it's expected to be used a bit in this function. */ static DECLCALLBACK(int) serialConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfgHandle) { int rc; SerialState *pData = PDMINS2DATA(pDevIns, SerialState*); uint16_t io_base; uint8_t irq_lvl; Assert(iInstance < 4); pData->pDevInsHC = pDevIns; pData->pDevInsGC = PDMDEVINS_2_GCPTR(pDevIns); /* * Validate configuration. */ if (!CFGMR3AreValuesValid(pCfgHandle, "IRQ\0IOBase\0")) { AssertMsgFailed(("serialConstruct Invalid configuration values\n")); return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES; } rc = CFGMR3QueryBool(pCfgHandle, "GCEnabled", &pData->fGCEnabled); if (rc == VERR_CFGM_VALUE_NOT_FOUND) pData->fGCEnabled = true; else if (VBOX_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"GCEnabled\" value")); rc = CFGMR3QueryBool(pCfgHandle, "R0Enabled", &pData->fR0Enabled); if (rc == VERR_CFGM_VALUE_NOT_FOUND) pData->fR0Enabled = true; else if (VBOX_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"R0Enabled\" value")); /* IBase */ pData->IBase.pfnQueryInterface = serialQueryInterface; /* ICharPort */ pData->ICharPort.pfnNotifyRead = serialNotifyRead; pData->ICharPort.pfnNotifyStatusLinesChanged = serialNotifyStatusLinesChanged; rc = RTSemEventCreate(&pData->ReceiveSem); AssertRC(rc); /* * Initialize critical section. * This must of course be done before attaching drivers or anything else which can call us back.. */ char szName[24]; RTStrPrintf(szName, sizeof(szName), "Serial#%d", iInstance); rc = PDMDevHlpCritSectInit(pDevIns, &pData->CritSect, szName); if (VBOX_FAILURE(rc)) return rc; rc = CFGMR3QueryU8 (pCfgHandle, "IRQ", &irq_lvl); if (rc == VERR_CFGM_VALUE_NOT_FOUND) { /* Provide sensible defaults. */ if (iInstance == 0) irq_lvl = 4; else if (iInstance == 1) irq_lvl = 3; } else if (VBOX_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"IRQ\" value")); rc = CFGMR3QueryU16 (pCfgHandle, "IOBase", &io_base); if (rc == VERR_CFGM_VALUE_NOT_FOUND) { if (iInstance == 0) io_base = 0x3f8; else if (iInstance == 1) io_base = 0x2f8; } else if (VBOX_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"IOBase\" value")); Log(("serialConstruct instance %d iobase=%04x irq=%d\n", iInstance, io_base, irq_lvl)); pData->irq = irq_lvl; pData->lsr = UART_LSR_TEMT | UART_LSR_THRE; pData->iir = UART_IIR_NO_INT; pData->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS; #ifdef VBOX_SERIAL_PCI pData->base = -1; pData->dev.config[0x00] = 0xee; /* Vendor: ??? */ pData->dev.config[0x01] = 0x80; pData->dev.config[0x02] = 0x01; /* Device: ??? */ pData->dev.config[0x03] = 0x01; pData->dev.config[0x04] = PCI_COMMAND_IOACCESS; pData->dev.config[0x09] = 0x01; /* Programming interface: 16450 */ pData->dev.config[0x0a] = 0x00; /* Subclass: Serial controller */ pData->dev.config[0x0b] = 0x07; /* Class: Communication controller */ pData->dev.config[0x0e] = 0x00; /* Header type: standard */ pData->dev.config[0x3c] = irq_lvl; /* preconfigure IRQ number (0 = autoconfig)*/ pData->dev.config[0x3d] = 1; /* interrupt pin 0 */ rc = PDMDevHlpPCIRegister(pDevIns, &pData->dev); if (VBOX_FAILURE(rc)) return rc; /* * Register the PCI I/O ports. */ rc = PDMDevHlpPCIIORegionRegister(pDevIns, 0, 8, PCI_ADDRESS_SPACE_IO, serialIOPortRegionMap); if (VBOX_FAILURE(rc)) return rc; #else /* !VBOX_SERIAL_PCI */ pData->base = io_base; rc = PDMDevHlpIOPortRegister(pDevIns, io_base, 8, 0, serialIOPortWrite, serialIOPortRead, NULL, NULL, "SERIAL"); if (VBOX_FAILURE (rc)) return rc; if (pData->fGCEnabled) rc = PDMDevHlpIOPortRegisterGC(pDevIns, io_base, 8, 0, "serialIOPortWrite", "serialIOPortRead", NULL, NULL, "Serial"); if (pData->fR0Enabled) rc = PDMDevHlpIOPortRegisterR0(pDevIns, io_base, 8, 0, "serialIOPortWrite", "serialIOPortRead", NULL, NULL, "Serial"); #endif /* !VBOX_SERIAL_PCI */ /* Attach the char driver and get the interfaces. For now no run-time * changes are supported. */ rc = PDMDevHlpDriverAttach(pDevIns, 0, &pData->IBase, &pData->pDrvBase, "Serial Char"); if (VBOX_SUCCESS(rc)) { pData->pDrvChar = (PDMICHAR *)pData->pDrvBase->pfnQueryInterface(pData->pDrvBase, PDMINTERFACE_CHAR); if (!pData->pDrvChar) { AssertMsgFailed(("Configuration error: instance %d has no char interface!\n", iInstance)); return VERR_PDM_MISSING_INTERFACE; } /** @todo provide read notification interface!!!! */ } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { pData->pDrvBase = NULL; pData->pDrvChar = NULL; LogRel(("Serial%d: no unit\n", iInstance)); } else { AssertMsgFailed(("Serial%d: Failed to attach to char driver. rc=%Vrc\n", iInstance, rc)); /* Don't call VMSetError here as we assume that the driver already set an appropriate error */ return rc; } rc = PDMDevHlpSSMRegister ( pDevIns, /* pDevIns */ pDevIns->pDevReg->szDeviceName, /* pszName */ iInstance, /* u32Instance */ SERIAL_SAVED_STATE_VERSION, /* u32Version */ sizeof (*pData), /* cbGuess */ NULL, /* pfnSavePrep */ serialSaveExec, /* pfnSaveExec */ NULL, /* pfnSaveDone */ NULL, /* pfnLoadPrep */ serialLoadExec, /* pfnLoadExec */ NULL /* pfnLoadDone */ ); if (VBOX_FAILURE(rc)) return rc; return VINF_SUCCESS; } /** * The device registration structure. */ const PDMDEVREG g_DeviceSerialPort = { /* u32Version */ PDM_DEVREG_VERSION, /* szDeviceName */ "serial", /* szGCMod */ "VBoxDDGC.gc", /* szR0Mod */ "VBoxDDR0.r0", /* pszDescription */ "Serial Communication Port", /* fFlags */ PDM_DEVREG_FLAGS_HOST_BITS_DEFAULT | PDM_DEVREG_FLAGS_GUEST_BITS_DEFAULT | PDM_DEVREG_FLAGS_GC | PDM_DEVREG_FLAGS_R0, /* fClass */ PDM_DEVREG_CLASS_SERIAL, /* cMaxInstances */ 1, /* cbInstance */ sizeof(SerialState), /* pfnConstruct */ serialConstruct, /* pfnDestruct */ serialDestruct, /* pfnRelocate */ serialRelocate, /* pfnIOCtl */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ NULL, /* pfnSuspend */ NULL, /* pfnResume */ NULL, /* pfnAttach */ NULL, /* pfnDetach */ NULL, /* pfnQueryInterface. */ NULL }; #endif /* IN_RING3 */ #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */