/* $Id: DevAHCI.cpp 93944 2022-02-24 21:15:14Z vboxsync $ */ /** @file * DevAHCI - AHCI controller device (disk and cdrom). * * Implements the AHCI standard 1.1 */ /* * Copyright (C) 2006-2022 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /** @page pg_dev_ahci AHCI - Advanced Host Controller Interface Emulation. * * This component implements an AHCI serial ATA controller. The device is split * into two parts. The first part implements the register interface for the * guest and the second one does the data transfer. * * The guest can access the controller in two ways. The first one is the native * way implementing the registers described in the AHCI specification and is * the preferred one. The second implements the I/O ports used for booting from * the hard disk and for guests which don't have an AHCI SATA driver. * * The data is transfered using the extended media interface, asynchronously if * it is supported by the driver below otherwise it weill be done synchronous. * Either way a thread is used to process new requests from the guest. */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_AHCI #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IN_RING3 # include # include # include # include # include # include #endif #include "VBoxDD.h" #if defined(VBOX_WITH_DTRACE) \ && defined(IN_RING3) \ && !defined(VBOX_DEVICE_STRUCT_TESTCASE) # include "dtrace/VBoxDD.h" #else # define VBOXDD_AHCI_REQ_SUBMIT(a,b,c,d) do { } while (0) # define VBOXDD_AHCI_REQ_COMPLETED(a,b,c,d) do { } while (0) #endif /** Maximum number of ports available. * Spec defines 32 but we have one allocated for command completion coalescing * and another for a reserved future feature. */ #define AHCI_MAX_NR_PORTS_IMPL 30 /** Maximum number of command slots available. */ #define AHCI_NR_COMMAND_SLOTS 32 /** The current saved state version. */ #define AHCI_SAVED_STATE_VERSION 9 /** The saved state version before the ATAPI emulation was removed and the generic SCSI driver was used. */ #define AHCI_SAVED_STATE_VERSION_PRE_ATAPI_REMOVE 8 /** The saved state version before changing the port reset logic in an incompatible way. */ #define AHCI_SAVED_STATE_VERSION_PRE_PORT_RESET_CHANGES 7 /** Saved state version before the per port hotplug port was added. */ #define AHCI_SAVED_STATE_VERSION_PRE_HOTPLUG_FLAG 6 /** Saved state version before legacy ATA emulation was dropped. */ #define AHCI_SAVED_STATE_VERSION_IDE_EMULATION 5 /** Saved state version before ATAPI support was added. */ #define AHCI_SAVED_STATE_VERSION_PRE_ATAPI 3 /** The saved state version use in VirtualBox 3.0 and earlier. * This was before the config was added and ahciIOTasks was dropped. */ #define AHCI_SAVED_STATE_VERSION_VBOX_30 2 /* for Older ATA state Read handling */ #define ATA_CTL_SAVED_STATE_VERSION 3 #define ATA_CTL_SAVED_STATE_VERSION_WITHOUT_FULL_SENSE 1 #define ATA_CTL_SAVED_STATE_VERSION_WITHOUT_EVENT_STATUS 2 /** The maximum number of release log entries per device. */ #define MAX_LOG_REL_ERRORS 1024 /** * Maximum number of sectors to transfer in a READ/WRITE MULTIPLE request. * Set to 1 to disable multi-sector read support. According to the ATA * specification this must be a power of 2 and it must fit in an 8 bit * value. Thus the only valid values are 1, 2, 4, 8, 16, 32, 64 and 128. */ #define ATA_MAX_MULT_SECTORS 128 /** * Fastest PIO mode supported by the drive. */ #define ATA_PIO_MODE_MAX 4 /** * Fastest MDMA mode supported by the drive. */ #define ATA_MDMA_MODE_MAX 2 /** * Fastest UDMA mode supported by the drive. */ #define ATA_UDMA_MODE_MAX 6 /** * Length of the configurable VPD data (without termination) */ #define AHCI_SERIAL_NUMBER_LENGTH 20 #define AHCI_FIRMWARE_REVISION_LENGTH 8 #define AHCI_MODEL_NUMBER_LENGTH 40 #define AHCI_ATAPI_INQUIRY_VENDOR_ID_LENGTH 8 #define AHCI_ATAPI_INQUIRY_PRODUCT_ID_LENGTH 16 #define AHCI_ATAPI_INQUIRY_REVISION_LENGTH 4 /** ATAPI sense info size. */ #define ATAPI_SENSE_SIZE 64 /** * Command Header. */ typedef struct { /** Description Information. */ uint32_t u32DescInf; /** Command status. */ uint32_t u32PRDBC; /** Command Table Base Address. */ uint32_t u32CmdTblAddr; /** Command Table Base Address - upper 32-bits. */ uint32_t u32CmdTblAddrUp; /** Reserved */ uint32_t u32Reserved[4]; } CmdHdr; AssertCompileSize(CmdHdr, 32); /* Defines for the command header. */ #define AHCI_CMDHDR_PRDTL_MASK 0xffff0000 #define AHCI_CMDHDR_PRDTL_ENTRIES(x) ((x & AHCI_CMDHDR_PRDTL_MASK) >> 16) #define AHCI_CMDHDR_C RT_BIT(10) #define AHCI_CMDHDR_B RT_BIT(9) #define AHCI_CMDHDR_R RT_BIT(8) #define AHCI_CMDHDR_P RT_BIT(7) #define AHCI_CMDHDR_W RT_BIT(6) #define AHCI_CMDHDR_A RT_BIT(5) #define AHCI_CMDHDR_CFL_MASK 0x1f #define AHCI_CMDHDR_PRDT_OFFSET 0x80 #define AHCI_CMDHDR_ACMD_OFFSET 0x40 /* Defines for the command FIS. */ /* Defines that are used in the first double word. */ #define AHCI_CMDFIS_TYPE 0 /* The first byte. */ # define AHCI_CMDFIS_TYPE_H2D 0x27 /* Register - Host to Device FIS. */ # define AHCI_CMDFIS_TYPE_H2D_SIZE 20 /* Five double words. */ # define AHCI_CMDFIS_TYPE_D2H 0x34 /* Register - Device to Host FIS. */ # define AHCI_CMDFIS_TYPE_D2H_SIZE 20 /* Five double words. */ # define AHCI_CMDFIS_TYPE_SETDEVBITS 0xa1 /* Set Device Bits - Device to Host FIS. */ # define AHCI_CMDFIS_TYPE_SETDEVBITS_SIZE 8 /* Two double words. */ # define AHCI_CMDFIS_TYPE_DMAACTD2H 0x39 /* DMA Activate - Device to Host FIS. */ # define AHCI_CMDFIS_TYPE_DMAACTD2H_SIZE 4 /* One double word. */ # define AHCI_CMDFIS_TYPE_DMASETUP 0x41 /* DMA Setup - Bidirectional FIS. */ # define AHCI_CMDFIS_TYPE_DMASETUP_SIZE 28 /* Seven double words. */ # define AHCI_CMDFIS_TYPE_PIOSETUP 0x5f /* PIO Setup - Device to Host FIS. */ # define AHCI_CMDFIS_TYPE_PIOSETUP_SIZE 20 /* Five double words. */ # define AHCI_CMDFIS_TYPE_DATA 0x46 /* Data - Bidirectional FIS. */ #define AHCI_CMDFIS_BITS 1 /* Interrupt and Update bit. */ #define AHCI_CMDFIS_C RT_BIT(7) /* Host to device. */ #define AHCI_CMDFIS_I RT_BIT(6) /* Device to Host. */ #define AHCI_CMDFIS_D RT_BIT(5) #define AHCI_CMDFIS_CMD 2 #define AHCI_CMDFIS_FET 3 #define AHCI_CMDFIS_SECTN 4 #define AHCI_CMDFIS_CYLL 5 #define AHCI_CMDFIS_CYLH 6 #define AHCI_CMDFIS_HEAD 7 #define AHCI_CMDFIS_SECTNEXP 8 #define AHCI_CMDFIS_CYLLEXP 9 #define AHCI_CMDFIS_CYLHEXP 10 #define AHCI_CMDFIS_FETEXP 11 #define AHCI_CMDFIS_SECTC 12 #define AHCI_CMDFIS_SECTCEXP 13 #define AHCI_CMDFIS_CTL 15 # define AHCI_CMDFIS_CTL_SRST RT_BIT(2) /* Reset device. */ # define AHCI_CMDFIS_CTL_NIEN RT_BIT(1) /* Assert or clear interrupt. */ /* For D2H FIS */ #define AHCI_CMDFIS_STS 2 #define AHCI_CMDFIS_ERR 3 /** Pointer to a task state. */ typedef struct AHCIREQ *PAHCIREQ; /** Task encountered a buffer overflow. */ #define AHCI_REQ_OVERFLOW RT_BIT_32(0) /** Request is a PIO data command, if this flag is not set it either is * a command which does not transfer data or a DMA command based on the transfer size. */ #define AHCI_REQ_PIO_DATA RT_BIT_32(1) /** The request has the SACT register set. */ #define AHCI_REQ_CLEAR_SACT RT_BIT_32(2) /** Flag whether the request is queued. */ #define AHCI_REQ_IS_QUEUED RT_BIT_32(3) /** Flag whether the request is stored on the stack. */ #define AHCI_REQ_IS_ON_STACK RT_BIT_32(4) /** Flag whether this request transfers data from the device to the HBA or * the other way around .*/ #define AHCI_REQ_XFER_2_HOST RT_BIT_32(5) /** * A task state. */ typedef struct AHCIREQ { /** The I/O request handle from the driver below associated with this request. */ PDMMEDIAEXIOREQ hIoReq; /** Tag of the task. */ uint32_t uTag; /** The command Fis for this task. */ uint8_t cmdFis[AHCI_CMDFIS_TYPE_H2D_SIZE]; /** The ATAPI command data. */ uint8_t aATAPICmd[ATAPI_PACKET_SIZE]; /** Physical address of the command header. - GC */ RTGCPHYS GCPhysCmdHdrAddr; /** Physical address of the PRDT */ RTGCPHYS GCPhysPrdtl; /** Number of entries in the PRDTL. */ unsigned cPrdtlEntries; /** Data direction. */ PDMMEDIAEXIOREQTYPE enmType; /** Start offset. */ uint64_t uOffset; /** Number of bytes to transfer. */ size_t cbTransfer; /** Flags for this task. */ uint32_t fFlags; /** SCSI status code. */ uint8_t u8ScsiSts; /** Flag when the buffer is mapped. */ bool fMapped; /** Page lock when the buffer is mapped. */ PGMPAGEMAPLOCK PgLck; } AHCIREQ; /** * Notifier queue item. */ typedef struct DEVPORTNOTIFIERQUEUEITEM { /** The core part owned by the queue manager. */ PDMQUEUEITEMCORE Core; /** The port to process. */ uint8_t iPort; } DEVPORTNOTIFIERQUEUEITEM, *PDEVPORTNOTIFIERQUEUEITEM; /** * The shared state of an AHCI port. */ typedef struct AHCIPORT { /** Command List Base Address. */ uint32_t regCLB; /** Command List Base Address upper bits. */ uint32_t regCLBU; /** FIS Base Address. */ uint32_t regFB; /** FIS Base Address upper bits. */ uint32_t regFBU; /** Interrupt Status. */ volatile uint32_t regIS; /** Interrupt Enable. */ uint32_t regIE; /** Command. */ uint32_t regCMD; /** Task File Data. */ uint32_t regTFD; /** Signature */ uint32_t regSIG; /** Serial ATA Status. */ uint32_t regSSTS; /** Serial ATA Control. */ uint32_t regSCTL; /** Serial ATA Error. */ uint32_t regSERR; /** Serial ATA Active. */ volatile uint32_t regSACT; /** Command Issue. */ uint32_t regCI; /** Current number of active tasks. */ volatile uint32_t cTasksActive; uint32_t u32Alignment1; /** Command List Base Address */ volatile RTGCPHYS GCPhysAddrClb; /** FIS Base Address */ volatile RTGCPHYS GCPhysAddrFb; /** Device is powered on. */ bool fPoweredOn; /** Device has spun up. */ bool fSpunUp; /** First D2H FIS was sent. */ bool fFirstD2HFisSent; /** Attached device is a CD/DVD drive. */ bool fATAPI; /** Flag whether this port is in a reset state. */ volatile bool fPortReset; /** Flag whether TRIM is supported. */ bool fTrimEnabled; /** Flag if we are in a device reset. */ bool fResetDevice; /** Flag whether this port is hot plug capable. */ bool fHotpluggable; /** Flag whether the port is in redo task mode. */ volatile bool fRedo; /** Flag whether the worker thread is sleeping. */ volatile bool fWrkThreadSleeping; bool afAlignment1[2]; /** Number of total sectors. */ uint64_t cTotalSectors; /** Size of one sector. */ uint32_t cbSector; /** Currently configured number of sectors in a multi-sector transfer. */ uint32_t cMultSectors; /** The LUN (same as port number). */ uint32_t iLUN; /** Set if there is a device present at the port. */ bool fPresent; /** Currently active transfer mode (MDMA/UDMA) and speed. */ uint8_t uATATransferMode; /** Exponent of logical sectors in a physical sector, number of logical sectors is 2^exp. */ uint8_t cLogSectorsPerPhysicalExp; uint8_t bAlignment2; /** ATAPI sense data. */ uint8_t abATAPISense[ATAPI_SENSE_SIZE]; /** Bitmap for finished tasks (R3 -> Guest). */ volatile uint32_t u32TasksFinished; /** Bitmap for finished queued tasks (R3 -> Guest). */ volatile uint32_t u32QueuedTasksFinished; /** Bitmap for new queued tasks (Guest -> R3). */ volatile uint32_t u32TasksNew; /** Bitmap of tasks which must be redone because of a non fatal error. */ volatile uint32_t u32TasksRedo; /** Current command slot processed. * Accessed by the guest by reading the CMD register. * Holds the command slot of the command processed at the moment. */ volatile uint32_t u32CurrentCommandSlot; /** Physical geometry of this image. */ PDMMEDIAGEOMETRY PCHSGeometry; /** The status LED state for this drive. */ PDMLED Led; /** The event semaphore the processing thread waits on. */ SUPSEMEVENT hEvtProcess; /** The serial numnber to use for IDENTIFY DEVICE commands. */ char szSerialNumber[AHCI_SERIAL_NUMBER_LENGTH+1]; /** < one extra byte for termination */ /** The firmware revision to use for IDENTIFY DEVICE commands. */ char szFirmwareRevision[AHCI_FIRMWARE_REVISION_LENGTH+1]; /** < one extra byte for termination */ /** The model number to use for IDENTIFY DEVICE commands. */ char szModelNumber[AHCI_MODEL_NUMBER_LENGTH+1]; /** < one extra byte for termination */ /** The vendor identification string for SCSI INQUIRY commands. */ char szInquiryVendorId[AHCI_ATAPI_INQUIRY_VENDOR_ID_LENGTH+1]; /** The product identification string for SCSI INQUIRY commands. */ char szInquiryProductId[AHCI_ATAPI_INQUIRY_PRODUCT_ID_LENGTH+1]; /** The revision string for SCSI INQUIRY commands. */ char szInquiryRevision[AHCI_ATAPI_INQUIRY_REVISION_LENGTH+1]; /** Error counter */ uint32_t cErrors; uint32_t u32Alignment5; } AHCIPORT; AssertCompileSizeAlignment(AHCIPORT, 8); /** Pointer to the shared state of an AHCI port. */ typedef AHCIPORT *PAHCIPORT; /** * The ring-3 state of an AHCI port. * * @implements PDMIBASE * @implements PDMIMEDIAPORT * @implements PDMIMEDIAEXPORT */ typedef struct AHCIPORTR3 { /** Pointer to the device instance - only to get our bearings in an interface * method, nothing else. */ PPDMDEVINSR3 pDevIns; /** The LUN (same as port number). */ uint32_t iLUN; /** Device specific settings (R3 only stuff). */ /** Pointer to the attached driver's base interface. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** Pointer to the attached driver's block interface. */ R3PTRTYPE(PPDMIMEDIA) pDrvMedia; /** Pointer to the attached driver's extended interface. */ R3PTRTYPE(PPDMIMEDIAEX) pDrvMediaEx; /** Port description. */ char szDesc[8]; /** The base interface. */ PDMIBASE IBase; /** The block port interface. */ PDMIMEDIAPORT IPort; /** The extended media port interface. */ PDMIMEDIAEXPORT IMediaExPort; /** Async IO Thread. */ R3PTRTYPE(PPDMTHREAD) pAsyncIOThread; /** First task throwing an error. */ R3PTRTYPE(volatile PAHCIREQ) pTaskErr; } AHCIPORTR3; AssertCompileSizeAlignment(AHCIPORTR3, 8); /** Pointer to the ring-3 state of an AHCI port. */ typedef AHCIPORTR3 *PAHCIPORTR3; /** * Main AHCI device state. * * @implements PDMILEDPORTS */ typedef struct AHCI { /** Global Host Control register of the HBA * @todo r=bird: Make this a 'name' doxygen comment with { and add a * corrsponding at-} where appropriate. I cannot tell where to put the * latter. */ /** HBA Capabilities - Readonly */ uint32_t regHbaCap; /** HBA Control */ uint32_t regHbaCtrl; /** Interrupt Status */ uint32_t regHbaIs; /** Ports Implemented - Readonly */ uint32_t regHbaPi; /** AHCI Version - Readonly */ uint32_t regHbaVs; /** Command completion coalescing control */ uint32_t regHbaCccCtl; /** Command completion coalescing ports */ uint32_t regHbaCccPorts; /** Index register for BIOS access. */ uint32_t regIdx; /** Countdown timer for command completion coalescing. */ TMTIMERHANDLE hHbaCccTimer; /** Which port number is used to mark an CCC interrupt */ uint8_t uCccPortNr; uint8_t abAlignment1[7]; /** Timeout value */ uint64_t uCccTimeout; /** Number of completions used to assert an interrupt */ uint32_t uCccNr; /** Current number of completed commands */ uint32_t uCccCurrentNr; /** Register structure per port */ AHCIPORT aPorts[AHCI_MAX_NR_PORTS_IMPL]; /** The critical section. */ PDMCRITSECT lock; /** Bitmask of ports which asserted an interrupt. */ volatile uint32_t u32PortsInterrupted; /** Number of I/O threads currently active - used for async controller reset handling. */ volatile uint32_t cThreadsActive; /** Flag whether the legacy port reset method should be used to make it work with saved states. */ bool fLegacyPortResetMethod; /** Enable tiger (10.4.x) SSTS hack or not. */ bool fTigerHack; /** Flag whether we have written the first 4bytes in an 8byte MMIO write successfully. */ volatile bool f8ByteMMIO4BytesWrittenSuccessfully; /** Device is in a reset state. * @todo r=bird: This isn't actually being modified by anyone... */ bool fReset; /** Supports 64bit addressing * @todo r=bird: This isn't really being modified by anyone (always false). */ bool f64BitAddr; /** Flag whether the controller has BIOS access enabled. * @todo r=bird: Not used, just queried from CFGM. */ bool fBootable; bool afAlignment2[2]; /** Number of usable ports on this controller. */ uint32_t cPortsImpl; /** Number of usable command slots for each port. */ uint32_t cCmdSlotsAvail; /** PCI region \#0: Legacy IDE fake, 8 ports. */ IOMIOPORTHANDLE hIoPortsLegacyFake0; /** PCI region \#1: Legacy IDE fake, 1 port. */ IOMIOPORTHANDLE hIoPortsLegacyFake1; /** PCI region \#2: Legacy IDE fake, 8 ports. */ IOMIOPORTHANDLE hIoPortsLegacyFake2; /** PCI region \#3: Legacy IDE fake, 1 port. */ IOMIOPORTHANDLE hIoPortsLegacyFake3; /** PCI region \#4: BMDMA I/O port range, 16 ports, used for the Index/Data * pair register access. */ IOMIOPORTHANDLE hIoPortIdxData; /** PCI region \#5: MMIO registers. */ IOMMMIOHANDLE hMmio; } AHCI; AssertCompileMemberAlignment(AHCI, aPorts, 8); /** Pointer to the state of an AHCI device. */ typedef AHCI *PAHCI; /** * Main AHCI device ring-3 state. * * @implements PDMILEDPORTS */ typedef struct AHCIR3 { /** Pointer to the device instance - only for getting our bearings in * interface methods. */ PPDMDEVINSR3 pDevIns; /** Status LUN: The base interface. */ PDMIBASE IBase; /** Status LUN: Leds interface. */ PDMILEDPORTS ILeds; /** Status LUN: Partner of ILeds. */ R3PTRTYPE(PPDMILEDCONNECTORS) pLedsConnector; /** Status LUN: Media Notifys. */ R3PTRTYPE(PPDMIMEDIANOTIFY) pMediaNotify; /** Register structure per port */ AHCIPORTR3 aPorts[AHCI_MAX_NR_PORTS_IMPL]; /** Indicates that PDMDevHlpAsyncNotificationCompleted should be called when * a port is entering the idle state. */ bool volatile fSignalIdle; bool afAlignment7[2+4]; } AHCIR3; /** Pointer to the ring-3 state of an AHCI device. */ typedef AHCIR3 *PAHCIR3; /** * Main AHCI device ring-0 state. */ typedef struct AHCIR0 { uint64_t uUnused; } AHCIR0; /** Pointer to the ring-0 state of an AHCI device. */ typedef AHCIR0 *PAHCIR0; /** * Main AHCI device raw-mode state. */ typedef struct AHCIRC { uint64_t uUnused; } AHCIRC; /** Pointer to the raw-mode state of an AHCI device. */ typedef AHCIRC *PAHCIRC; /** Main AHCI device current context state. */ typedef CTX_SUFF(AHCI) AHCICC; /** Pointer to the current context state of an AHCI device. */ typedef CTX_SUFF(PAHCI) PAHCICC; /** * Scatter gather list entry. */ typedef struct { /** Data Base Address. */ uint32_t u32DBA; /** Data Base Address - Upper 32-bits. */ uint32_t u32DBAUp; /** Reserved */ uint32_t u32Reserved; /** Description information. */ uint32_t u32DescInf; } SGLEntry; AssertCompileSize(SGLEntry, 16); #ifdef IN_RING3 /** * Memory buffer callback. * * @returns nothing. * @param pDevIns The device instance. * @param GCPhys The guest physical address of the memory buffer. * @param pSgBuf The pointer to the host R3 S/G buffer. * @param cbCopy How many bytes to copy between the two buffers. * @param pcbSkip Initially contains the amount of bytes to skip * starting from the guest physical address before * accessing the S/G buffer and start copying data. * On return this contains the remaining amount if * cbCopy < *pcbSkip or 0 otherwise. */ typedef DECLCALLBACKTYPE(void, FNAHCIR3MEMCOPYCALLBACK,(PPDMDEVINS pDevIns, RTGCPHYS GCPhys, PRTSGBUF pSgBuf, size_t cbCopy, size_t *pcbSkip)); /** Pointer to a memory copy buffer callback. */ typedef FNAHCIR3MEMCOPYCALLBACK *PFNAHCIR3MEMCOPYCALLBACK; #endif /** Defines for a scatter gather list entry. */ #define SGLENTRY_DBA_READONLY ~(RT_BIT(0)) #define SGLENTRY_DESCINF_I RT_BIT(31) #define SGLENTRY_DESCINF_DBC 0x3fffff #define SGLENTRY_DESCINF_READONLY 0x803fffff /* Defines for the global host control registers for the HBA. */ #define AHCI_HBA_GLOBAL_SIZE 0x100 /* Defines for the HBA Capabilities - Readonly */ #define AHCI_HBA_CAP_S64A RT_BIT(31) #define AHCI_HBA_CAP_SNCQ RT_BIT(30) #define AHCI_HBA_CAP_SIS RT_BIT(28) #define AHCI_HBA_CAP_SSS RT_BIT(27) #define AHCI_HBA_CAP_SALP RT_BIT(26) #define AHCI_HBA_CAP_SAL RT_BIT(25) #define AHCI_HBA_CAP_SCLO RT_BIT(24) #define AHCI_HBA_CAP_ISS (RT_BIT(23) | RT_BIT(22) | RT_BIT(21) | RT_BIT(20)) # define AHCI_HBA_CAP_ISS_SHIFT(x) (((x) << 20) & AHCI_HBA_CAP_ISS) # define AHCI_HBA_CAP_ISS_GEN1 RT_BIT(0) # define AHCI_HBA_CAP_ISS_GEN2 RT_BIT(1) #define AHCI_HBA_CAP_SNZO RT_BIT(19) #define AHCI_HBA_CAP_SAM RT_BIT(18) #define AHCI_HBA_CAP_SPM RT_BIT(17) #define AHCI_HBA_CAP_PMD RT_BIT(15) #define AHCI_HBA_CAP_SSC RT_BIT(14) #define AHCI_HBA_CAP_PSC RT_BIT(13) #define AHCI_HBA_CAP_NCS (RT_BIT(12) | RT_BIT(11) | RT_BIT(10) | RT_BIT(9) | RT_BIT(8)) #define AHCI_HBA_CAP_NCS_SET(x) (((x-1) << 8) & AHCI_HBA_CAP_NCS) /* 0's based */ #define AHCI_HBA_CAP_CCCS RT_BIT(7) #define AHCI_HBA_CAP_NP (RT_BIT(4) | RT_BIT(3) | RT_BIT(2) | RT_BIT(1) | RT_BIT(0)) #define AHCI_HBA_CAP_NP_SET(x) ((x-1) & AHCI_HBA_CAP_NP) /* 0's based */ /* Defines for the HBA Control register - Read/Write */ #define AHCI_HBA_CTRL_AE RT_BIT(31) #define AHCI_HBA_CTRL_IE RT_BIT(1) #define AHCI_HBA_CTRL_HR RT_BIT(0) #define AHCI_HBA_CTRL_RW_MASK (RT_BIT(0) | RT_BIT(1)) /* Mask for the used bits */ /* Defines for the HBA Version register - Readonly (We support AHCI 1.0) */ #define AHCI_HBA_VS_MJR (1 << 16) #define AHCI_HBA_VS_MNR 0x100 /* Defines for the command completion coalescing control register */ #define AHCI_HBA_CCC_CTL_TV 0xffff0000 #define AHCI_HBA_CCC_CTL_TV_SET(x) (x << 16) #define AHCI_HBA_CCC_CTL_TV_GET(x) ((x & AHCI_HBA_CCC_CTL_TV) >> 16) #define AHCI_HBA_CCC_CTL_CC 0xff00 #define AHCI_HBA_CCC_CTL_CC_SET(x) (x << 8) #define AHCI_HBA_CCC_CTL_CC_GET(x) ((x & AHCI_HBA_CCC_CTL_CC) >> 8) #define AHCI_HBA_CCC_CTL_INT 0xf8 #define AHCI_HBA_CCC_CTL_INT_SET(x) (x << 3) #define AHCI_HBA_CCC_CTL_INT_GET(x) ((x & AHCI_HBA_CCC_CTL_INT) >> 3) #define AHCI_HBA_CCC_CTL_EN RT_BIT(0) /* Defines for the port registers. */ #define AHCI_PORT_REGISTER_SIZE 0x80 #define AHCI_PORT_CLB_RESERVED 0xfffffc00 /* For masking out the reserved bits. */ #define AHCI_PORT_FB_RESERVED 0xffffff00 /* For masking out the reserved bits. */ #define AHCI_PORT_IS_CPDS RT_BIT(31) #define AHCI_PORT_IS_TFES RT_BIT(30) #define AHCI_PORT_IS_HBFS RT_BIT(29) #define AHCI_PORT_IS_HBDS RT_BIT(28) #define AHCI_PORT_IS_IFS RT_BIT(27) #define AHCI_PORT_IS_INFS RT_BIT(26) #define AHCI_PORT_IS_OFS RT_BIT(24) #define AHCI_PORT_IS_IPMS RT_BIT(23) #define AHCI_PORT_IS_PRCS RT_BIT(22) #define AHCI_PORT_IS_DIS RT_BIT(7) #define AHCI_PORT_IS_PCS RT_BIT(6) #define AHCI_PORT_IS_DPS RT_BIT(5) #define AHCI_PORT_IS_UFS RT_BIT(4) #define AHCI_PORT_IS_SDBS RT_BIT(3) #define AHCI_PORT_IS_DSS RT_BIT(2) #define AHCI_PORT_IS_PSS RT_BIT(1) #define AHCI_PORT_IS_DHRS RT_BIT(0) #define AHCI_PORT_IS_READONLY 0xfd8000af /* Readonly mask including reserved bits. */ #define AHCI_PORT_IE_CPDE RT_BIT(31) #define AHCI_PORT_IE_TFEE RT_BIT(30) #define AHCI_PORT_IE_HBFE RT_BIT(29) #define AHCI_PORT_IE_HBDE RT_BIT(28) #define AHCI_PORT_IE_IFE RT_BIT(27) #define AHCI_PORT_IE_INFE RT_BIT(26) #define AHCI_PORT_IE_OFE RT_BIT(24) #define AHCI_PORT_IE_IPME RT_BIT(23) #define AHCI_PORT_IE_PRCE RT_BIT(22) #define AHCI_PORT_IE_DIE RT_BIT(7) /* Not supported for now, readonly. */ #define AHCI_PORT_IE_PCE RT_BIT(6) #define AHCI_PORT_IE_DPE RT_BIT(5) #define AHCI_PORT_IE_UFE RT_BIT(4) #define AHCI_PORT_IE_SDBE RT_BIT(3) #define AHCI_PORT_IE_DSE RT_BIT(2) #define AHCI_PORT_IE_PSE RT_BIT(1) #define AHCI_PORT_IE_DHRE RT_BIT(0) #define AHCI_PORT_IE_READONLY (0xfdc000ff) /* Readonly mask including reserved bits. */ #define AHCI_PORT_CMD_ICC (RT_BIT(28) | RT_BIT(29) | RT_BIT(30) | RT_BIT(31)) #define AHCI_PORT_CMD_ICC_SHIFT(x) ((x) << 28) # define AHCI_PORT_CMD_ICC_IDLE 0x0 # define AHCI_PORT_CMD_ICC_ACTIVE 0x1 # define AHCI_PORT_CMD_ICC_PARTIAL 0x2 # define AHCI_PORT_CMD_ICC_SLUMBER 0x6 #define AHCI_PORT_CMD_ASP RT_BIT(27) /* Not supported - Readonly */ #define AHCI_PORT_CMD_ALPE RT_BIT(26) /* Not supported - Readonly */ #define AHCI_PORT_CMD_DLAE RT_BIT(25) #define AHCI_PORT_CMD_ATAPI RT_BIT(24) #define AHCI_PORT_CMD_CPD RT_BIT(20) #define AHCI_PORT_CMD_ISP RT_BIT(19) /* Readonly */ #define AHCI_PORT_CMD_HPCP RT_BIT(18) #define AHCI_PORT_CMD_PMA RT_BIT(17) /* Not supported - Readonly */ #define AHCI_PORT_CMD_CPS RT_BIT(16) #define AHCI_PORT_CMD_CR RT_BIT(15) /* Readonly */ #define AHCI_PORT_CMD_FR RT_BIT(14) /* Readonly */ #define AHCI_PORT_CMD_ISS RT_BIT(13) /* Readonly */ #define AHCI_PORT_CMD_CCS (RT_BIT(8) | RT_BIT(9) | RT_BIT(10) | RT_BIT(11) | RT_BIT(12)) #define AHCI_PORT_CMD_CCS_SHIFT(x) (x << 8) /* Readonly */ #define AHCI_PORT_CMD_FRE RT_BIT(4) #define AHCI_PORT_CMD_CLO RT_BIT(3) #define AHCI_PORT_CMD_POD RT_BIT(2) #define AHCI_PORT_CMD_SUD RT_BIT(1) #define AHCI_PORT_CMD_ST RT_BIT(0) #define AHCI_PORT_CMD_READONLY (0xff02001f & ~(AHCI_PORT_CMD_ASP | AHCI_PORT_CMD_ALPE | AHCI_PORT_CMD_PMA)) #define AHCI_PORT_SCTL_IPM (RT_BIT(11) | RT_BIT(10) | RT_BIT(9) | RT_BIT(8)) #define AHCI_PORT_SCTL_IPM_GET(x) ((x & AHCI_PORT_SCTL_IPM) >> 8) #define AHCI_PORT_SCTL_SPD (RT_BIT(7) | RT_BIT(6) | RT_BIT(5) | RT_BIT(4)) #define AHCI_PORT_SCTL_SPD_GET(x) ((x & AHCI_PORT_SCTL_SPD) >> 4) #define AHCI_PORT_SCTL_DET (RT_BIT(3) | RT_BIT(2) | RT_BIT(1) | RT_BIT(0)) #define AHCI_PORT_SCTL_DET_GET(x) (x & AHCI_PORT_SCTL_DET) #define AHCI_PORT_SCTL_DET_NINIT 0 #define AHCI_PORT_SCTL_DET_INIT 1 #define AHCI_PORT_SCTL_DET_OFFLINE 4 #define AHCI_PORT_SCTL_READONLY 0xfff #define AHCI_PORT_SSTS_IPM (RT_BIT(11) | RT_BIT(10) | RT_BIT(9) | RT_BIT(8)) #define AHCI_PORT_SSTS_IPM_GET(x) ((x & AHCI_PORT_SCTL_IPM) >> 8) #define AHCI_PORT_SSTS_SPD (RT_BIT(7) | RT_BIT(6) | RT_BIT(5) | RT_BIT(4)) #define AHCI_PORT_SSTS_SPD_GET(x) ((x & AHCI_PORT_SCTL_SPD) >> 4) #define AHCI_PORT_SSTS_DET (RT_BIT(3) | RT_BIT(2) | RT_BIT(1) | RT_BIT(0)) #define AHCI_PORT_SSTS_DET_GET(x) (x & AHCI_PORT_SCTL_DET) #define AHCI_PORT_TFD_BSY RT_BIT(7) #define AHCI_PORT_TFD_DRQ RT_BIT(3) #define AHCI_PORT_TFD_ERR RT_BIT(0) #define AHCI_PORT_SERR_X RT_BIT(26) #define AHCI_PORT_SERR_W RT_BIT(18) #define AHCI_PORT_SERR_N RT_BIT(16) /* Signatures for attached storage devices. */ #define AHCI_PORT_SIG_DISK 0x00000101 #define AHCI_PORT_SIG_ATAPI 0xeb140101 /* * The AHCI spec defines an area of memory where the HBA posts received FIS's from the device. * regFB points to the base of this area. * Every FIS type has an offset where it is posted in this area. */ #define AHCI_RECFIS_DSFIS_OFFSET 0x00 /* DMA Setup FIS */ #define AHCI_RECFIS_PSFIS_OFFSET 0x20 /* PIO Setup FIS */ #define AHCI_RECFIS_RFIS_OFFSET 0x40 /* D2H Register FIS */ #define AHCI_RECFIS_SDBFIS_OFFSET 0x58 /* Set Device Bits FIS */ #define AHCI_RECFIS_UFIS_OFFSET 0x60 /* Unknown FIS type */ /** Mask to get the LBA value from a LBA range. */ #define AHCI_RANGE_LBA_MASK UINT64_C(0xffffffffffff) /** Mas to get the length value from a LBA range. */ #define AHCI_RANGE_LENGTH_MASK UINT64_C(0xffff000000000000) /** Returns the length of the range in sectors. */ #define AHCI_RANGE_LENGTH_GET(val) (((val) & AHCI_RANGE_LENGTH_MASK) >> 48) /** * AHCI register operator. */ typedef struct ahci_opreg { const char *pszName; VBOXSTRICTRC (*pfnRead )(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t *pu32Value); VBOXSTRICTRC (*pfnWrite)(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t u32Value); } AHCIOPREG; /** * AHCI port register operator. */ typedef struct pAhciPort_opreg { const char *pszName; VBOXSTRICTRC (*pfnRead )(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value); VBOXSTRICTRC (*pfnWrite)(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value); } AHCIPORTOPREG; /********************************************************************************************************************************* * Internal Functions * *********************************************************************************************************************************/ #ifndef VBOX_DEVICE_STRUCT_TESTCASE RT_C_DECLS_BEGIN #ifdef IN_RING3 static void ahciR3HBAReset(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIR3 pThisCC); static int ahciPostFisIntoMemory(PPDMDEVINS pDevIns, PAHCIPORT pAhciPort, unsigned uFisType, uint8_t *pCmdFis); static void ahciPostFirstD2HFisIntoMemory(PPDMDEVINS pDevIns, PAHCIPORT pAhciPort); static size_t ahciR3CopyBufferToPrdtl(PPDMDEVINS pDevIns, PAHCIREQ pAhciReq, const void *pvSrc, size_t cbSrc, size_t cbSkip); static bool ahciR3CancelActiveTasks(PAHCIPORTR3 pAhciPortR3); #endif RT_C_DECLS_END /********************************************************************************************************************************* * Defined Constants And Macros * *********************************************************************************************************************************/ #define AHCI_RTGCPHYS_FROM_U32(Hi, Lo) ( (RTGCPHYS)RT_MAKE_U64(Lo, Hi) ) #ifdef IN_RING3 # ifdef LOG_USE_C99 # define ahciLog(a) \ Log(("R3 P%u: %M", pAhciPort->iLUN, _LogRelRemoveParentheseis a)) # else # define ahciLog(a) \ do { Log(("R3 P%u: ", pAhciPort->iLUN)); Log(a); } while(0) # endif #elif defined(IN_RING0) # ifdef LOG_USE_C99 # define ahciLog(a) \ Log(("R0 P%u: %M", pAhciPort->iLUN, _LogRelRemoveParentheseis a)) # else # define ahciLog(a) \ do { Log(("R0 P%u: ", pAhciPort->iLUN)); Log(a); } while(0) # endif #elif defined(IN_RC) # ifdef LOG_USE_C99 # define ahciLog(a) \ Log(("GC P%u: %M", pAhciPort->iLUN, _LogRelRemoveParentheseis a)) # else # define ahciLog(a) \ do { Log(("GC P%u: ", pAhciPort->iLUN)); Log(a); } while(0) # endif #endif /** * Update PCI IRQ levels */ static void ahciHbaClearInterrupt(PPDMDEVINS pDevIns) { Log(("%s: Clearing interrupt\n", __FUNCTION__)); PDMDevHlpPCISetIrq(pDevIns, 0, 0); } /** * Updates the IRQ level and sets port bit in the global interrupt status register of the HBA. */ static int ahciHbaSetInterrupt(PPDMDEVINS pDevIns, PAHCI pThis, uint8_t iPort, int rcBusy) { Log(("P%u: %s: Setting interrupt\n", iPort, __FUNCTION__)); int rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->lock, rcBusy); if (rc != VINF_SUCCESS) return rc; if (pThis->regHbaCtrl & AHCI_HBA_CTRL_IE) { if ((pThis->regHbaCccCtl & AHCI_HBA_CCC_CTL_EN) && (pThis->regHbaCccPorts & (1 << iPort))) { pThis->uCccCurrentNr++; if (pThis->uCccCurrentNr >= pThis->uCccNr) { /* Reset command completion coalescing state. */ PDMDevHlpTimerSetMillies(pDevIns, pThis->hHbaCccTimer, pThis->uCccTimeout); pThis->uCccCurrentNr = 0; pThis->u32PortsInterrupted |= (1 << pThis->uCccPortNr); if (!(pThis->u32PortsInterrupted & ~(1 << pThis->uCccPortNr))) { Log(("P%u: %s: Fire interrupt\n", iPort, __FUNCTION__)); PDMDevHlpPCISetIrq(pDevIns, 0, 1); } } } else { /* If only the bit of the actual port is set assert an interrupt * because the interrupt status register was already read by the guest * and we need to send a new notification. * Otherwise an interrupt is still pending. */ ASMAtomicOrU32((volatile uint32_t *)&pThis->u32PortsInterrupted, (1 << iPort)); if (!(pThis->u32PortsInterrupted & ~(1 << iPort))) { Log(("P%u: %s: Fire interrupt\n", iPort, __FUNCTION__)); PDMDevHlpPCISetIrq(pDevIns, 0, 1); } } } PDMDevHlpCritSectLeave(pDevIns, &pThis->lock); return VINF_SUCCESS; } #ifdef IN_RING3 /** * @callback_method_impl{FNTMTIMERDEV, Assert irq when an CCC timeout occurs.} */ static DECLCALLBACK(void) ahciCccTimer(PPDMDEVINS pDevIns, TMTIMERHANDLE hTimer, void *pvUser) { RT_NOREF(pDevIns, hTimer); PAHCI pThis = (PAHCI)pvUser; int rc = ahciHbaSetInterrupt(pDevIns, pThis, pThis->uCccPortNr, VERR_IGNORED); AssertRC(rc); } /** * Finishes the port reset of the given port. * * @returns nothing. * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pAhciPort The port to finish the reset on, shared bits. * @param pAhciPortR3 The port to finish the reset on, ring-3 bits. */ static void ahciPortResetFinish(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, PAHCIPORTR3 pAhciPortR3) { ahciLog(("%s: Initiated.\n", __FUNCTION__)); /* Cancel all tasks first. */ bool fAllTasksCanceled = ahciR3CancelActiveTasks(pAhciPortR3); Assert(fAllTasksCanceled); NOREF(fAllTasksCanceled); /* Signature for SATA device. */ if (pAhciPort->fATAPI) pAhciPort->regSIG = AHCI_PORT_SIG_ATAPI; else pAhciPort->regSIG = AHCI_PORT_SIG_DISK; /* We received a COMINIT from the device. Tell the guest. */ ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_PCS); pAhciPort->regSERR |= AHCI_PORT_SERR_X; pAhciPort->regTFD |= ATA_STAT_BUSY; if ((pAhciPort->regCMD & AHCI_PORT_CMD_FRE) && (!pAhciPort->fFirstD2HFisSent)) { ahciPostFirstD2HFisIntoMemory(pDevIns, pAhciPort); ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_DHRS); if (pAhciPort->regIE & AHCI_PORT_IE_DHRE) { int rc = ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VERR_IGNORED); AssertRC(rc); } } pAhciPort->regSSTS = (0x01 << 8) /* Interface is active. */ | (0x03 << 0); /* Device detected and communication established. */ /* * Use the maximum allowed speed. * (Not that it changes anything really) */ switch (AHCI_PORT_SCTL_SPD_GET(pAhciPort->regSCTL)) { case 0x01: pAhciPort->regSSTS |= (0x01 << 4); /* Generation 1 (1.5GBps) speed. */ break; case 0x02: case 0x00: default: pAhciPort->regSSTS |= (0x02 << 4); /* Generation 2 (3.0GBps) speed. */ break; } ASMAtomicXchgBool(&pAhciPort->fPortReset, false); } #endif /* IN_RING3 */ /** * Kicks the I/O thread from RC or R0. * * @returns nothing. * @param pDevIns The device instance. * @param pAhciPort The port to kick, shared bits. */ static void ahciIoThreadKick(PPDMDEVINS pDevIns, PAHCIPORT pAhciPort) { LogFlowFunc(("Signal event semaphore\n")); int rc = PDMDevHlpSUPSemEventSignal(pDevIns, pAhciPort->hEvtProcess); AssertRC(rc); } static VBOXSTRICTRC PortCmdIssue_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); RT_NOREF(pThis, iReg); /* Update the CI register first. */ uint32_t uCIValue = ASMAtomicXchgU32(&pAhciPort->u32TasksFinished, 0); pAhciPort->regCI &= ~uCIValue; if ( (pAhciPort->regCMD & AHCI_PORT_CMD_CR) && u32Value > 0) { /* * Clear all tasks which are already marked as busy. The guest * shouldn't write already busy tasks actually. */ u32Value &= ~pAhciPort->regCI; ASMAtomicOrU32(&pAhciPort->u32TasksNew, u32Value); /* Send a notification to R3 if u32TasksNew was 0 before our write. */ if (ASMAtomicReadBool(&pAhciPort->fWrkThreadSleeping)) ahciIoThreadKick(pDevIns, pAhciPort); else ahciLog(("%s: Worker thread busy, no need to kick.\n", __FUNCTION__)); } else ahciLog(("%s: Nothing to do (CMD=%08x).\n", __FUNCTION__, pAhciPort->regCMD)); pAhciPort->regCI |= u32Value; return VINF_SUCCESS; } static VBOXSTRICTRC PortCmdIssue_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); uint32_t uCIValue = ASMAtomicXchgU32(&pAhciPort->u32TasksFinished, 0); ahciLog(("%s: read regCI=%#010x uCIValue=%#010x\n", __FUNCTION__, pAhciPort->regCI, uCIValue)); pAhciPort->regCI &= ~uCIValue; *pu32Value = pAhciPort->regCI; return VINF_SUCCESS; } static VBOXSTRICTRC PortSActive_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); RT_NOREF(pDevIns, pThis, iReg); pAhciPort->regSACT |= u32Value; return VINF_SUCCESS; } static VBOXSTRICTRC PortSActive_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); uint32_t u32TasksFinished = ASMAtomicXchgU32(&pAhciPort->u32QueuedTasksFinished, 0); pAhciPort->regSACT &= ~u32TasksFinished; ahciLog(("%s: read regSACT=%#010x regCI=%#010x u32TasksFinished=%#010x\n", __FUNCTION__, pAhciPort->regSACT, pAhciPort->regCI, u32TasksFinished)); *pu32Value = pAhciPort->regSACT; return VINF_SUCCESS; } static VBOXSTRICTRC PortSError_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); if ( (u32Value & AHCI_PORT_SERR_X) && (pAhciPort->regSERR & AHCI_PORT_SERR_X)) { ASMAtomicAndU32(&pAhciPort->regIS, ~AHCI_PORT_IS_PCS); pAhciPort->regTFD |= ATA_STAT_ERR; pAhciPort->regTFD &= ~(ATA_STAT_DRQ | ATA_STAT_BUSY); } if ( (u32Value & AHCI_PORT_SERR_N) && (pAhciPort->regSERR & AHCI_PORT_SERR_N)) ASMAtomicAndU32(&pAhciPort->regIS, ~AHCI_PORT_IS_PRCS); pAhciPort->regSERR &= ~u32Value; return VINF_SUCCESS; } static VBOXSTRICTRC PortSError_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regSERR=%#010x\n", __FUNCTION__, pAhciPort->regSERR)); *pu32Value = pAhciPort->regSERR; return VINF_SUCCESS; } static VBOXSTRICTRC PortSControl_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pThis, iReg); ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); ahciLog(("%s: IPM=%d SPD=%d DET=%d\n", __FUNCTION__, AHCI_PORT_SCTL_IPM_GET(u32Value), AHCI_PORT_SCTL_SPD_GET(u32Value), AHCI_PORT_SCTL_DET_GET(u32Value))); #ifndef IN_RING3 RT_NOREF(pDevIns, pAhciPort, u32Value); return VINF_IOM_R3_MMIO_WRITE; #else if ((u32Value & AHCI_PORT_SCTL_DET) == AHCI_PORT_SCTL_DET_INIT) { if (!ASMAtomicXchgBool(&pAhciPort->fPortReset, true)) LogRel(("AHCI#%u: Port %d reset\n", pDevIns->iInstance, pAhciPort->iLUN)); pAhciPort->regSSTS = 0; pAhciPort->regSIG = UINT32_MAX; pAhciPort->regTFD = 0x7f; pAhciPort->fFirstD2HFisSent = false; pAhciPort->regSCTL = u32Value; } else if ( (u32Value & AHCI_PORT_SCTL_DET) == AHCI_PORT_SCTL_DET_NINIT && (pAhciPort->regSCTL & AHCI_PORT_SCTL_DET) == AHCI_PORT_SCTL_DET_INIT && pAhciPort->fPresent) { /* Do the port reset here, so the guest sees the new status immediately. */ if (pThis->fLegacyPortResetMethod) { PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); PAHCIPORTR3 pAhciPortR3 = &RT_SAFE_SUBSCRIPT(pThisCC->aPorts, pAhciPort->iLUN); ahciPortResetFinish(pDevIns, pThis, pAhciPort, pAhciPortR3); pAhciPort->regSCTL = u32Value; /* Update after finishing the reset, so the I/O thread doesn't get a chance to do the reset. */ } else { if (!pThis->fTigerHack) pAhciPort->regSSTS = 0x1; /* Indicate device presence detected but communication not established. */ else pAhciPort->regSSTS = 0x0; /* Indicate no device detected after COMRESET. [tiger hack] */ pAhciPort->regSCTL = u32Value; /* Update before kicking the I/O thread. */ /* Kick the thread to finish the reset. */ ahciIoThreadKick(pDevIns, pAhciPort); } } else /* Just update the value if there is no device attached. */ pAhciPort->regSCTL = u32Value; return VINF_SUCCESS; #endif } static VBOXSTRICTRC PortSControl_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regSCTL=%#010x\n", __FUNCTION__, pAhciPort->regSCTL)); ahciLog(("%s: IPM=%d SPD=%d DET=%d\n", __FUNCTION__, AHCI_PORT_SCTL_IPM_GET(pAhciPort->regSCTL), AHCI_PORT_SCTL_SPD_GET(pAhciPort->regSCTL), AHCI_PORT_SCTL_DET_GET(pAhciPort->regSCTL))); *pu32Value = pAhciPort->regSCTL; return VINF_SUCCESS; } static VBOXSTRICTRC PortSStatus_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regSSTS=%#010x\n", __FUNCTION__, pAhciPort->regSSTS)); ahciLog(("%s: IPM=%d SPD=%d DET=%d\n", __FUNCTION__, AHCI_PORT_SSTS_IPM_GET(pAhciPort->regSSTS), AHCI_PORT_SSTS_SPD_GET(pAhciPort->regSSTS), AHCI_PORT_SSTS_DET_GET(pAhciPort->regSSTS))); *pu32Value = pAhciPort->regSSTS; return VINF_SUCCESS; } static VBOXSTRICTRC PortSignature_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regSIG=%#010x\n", __FUNCTION__, pAhciPort->regSIG)); *pu32Value = pAhciPort->regSIG; return VINF_SUCCESS; } static VBOXSTRICTRC PortTaskFileData_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regTFD=%#010x\n", __FUNCTION__, pAhciPort->regTFD)); ahciLog(("%s: ERR=%x BSY=%d DRQ=%d ERR=%d\n", __FUNCTION__, (pAhciPort->regTFD >> 8), (pAhciPort->regTFD & AHCI_PORT_TFD_BSY) >> 7, (pAhciPort->regTFD & AHCI_PORT_TFD_DRQ) >> 3, (pAhciPort->regTFD & AHCI_PORT_TFD_ERR))); *pu32Value = pAhciPort->regTFD; return VINF_SUCCESS; } /** * Read from the port command register. */ static VBOXSTRICTRC PortCmd_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regCMD=%#010x\n", __FUNCTION__, pAhciPort->regCMD | AHCI_PORT_CMD_CCS_SHIFT(pAhciPort->u32CurrentCommandSlot))); ahciLog(("%s: ICC=%d ASP=%d ALPE=%d DLAE=%d ATAPI=%d CPD=%d ISP=%d HPCP=%d PMA=%d CPS=%d CR=%d FR=%d ISS=%d CCS=%d FRE=%d CLO=%d POD=%d SUD=%d ST=%d\n", __FUNCTION__, (pAhciPort->regCMD & AHCI_PORT_CMD_ICC) >> 28, (pAhciPort->regCMD & AHCI_PORT_CMD_ASP) >> 27, (pAhciPort->regCMD & AHCI_PORT_CMD_ALPE) >> 26, (pAhciPort->regCMD & AHCI_PORT_CMD_DLAE) >> 25, (pAhciPort->regCMD & AHCI_PORT_CMD_ATAPI) >> 24, (pAhciPort->regCMD & AHCI_PORT_CMD_CPD) >> 20, (pAhciPort->regCMD & AHCI_PORT_CMD_ISP) >> 19, (pAhciPort->regCMD & AHCI_PORT_CMD_HPCP) >> 18, (pAhciPort->regCMD & AHCI_PORT_CMD_PMA) >> 17, (pAhciPort->regCMD & AHCI_PORT_CMD_CPS) >> 16, (pAhciPort->regCMD & AHCI_PORT_CMD_CR) >> 15, (pAhciPort->regCMD & AHCI_PORT_CMD_FR) >> 14, (pAhciPort->regCMD & AHCI_PORT_CMD_ISS) >> 13, pAhciPort->u32CurrentCommandSlot, (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) >> 4, (pAhciPort->regCMD & AHCI_PORT_CMD_CLO) >> 3, (pAhciPort->regCMD & AHCI_PORT_CMD_POD) >> 2, (pAhciPort->regCMD & AHCI_PORT_CMD_SUD) >> 1, (pAhciPort->regCMD & AHCI_PORT_CMD_ST))); *pu32Value = pAhciPort->regCMD | AHCI_PORT_CMD_CCS_SHIFT(pAhciPort->u32CurrentCommandSlot); return VINF_SUCCESS; } /** * Write to the port command register. * This is the register where all the data transfer is started */ static VBOXSTRICTRC PortCmd_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); ahciLog(("%s: ICC=%d ASP=%d ALPE=%d DLAE=%d ATAPI=%d CPD=%d ISP=%d HPCP=%d PMA=%d CPS=%d CR=%d FR=%d ISS=%d CCS=%d FRE=%d CLO=%d POD=%d SUD=%d ST=%d\n", __FUNCTION__, (u32Value & AHCI_PORT_CMD_ICC) >> 28, (u32Value & AHCI_PORT_CMD_ASP) >> 27, (u32Value & AHCI_PORT_CMD_ALPE) >> 26, (u32Value & AHCI_PORT_CMD_DLAE) >> 25, (u32Value & AHCI_PORT_CMD_ATAPI) >> 24, (u32Value & AHCI_PORT_CMD_CPD) >> 20, (u32Value & AHCI_PORT_CMD_ISP) >> 19, (u32Value & AHCI_PORT_CMD_HPCP) >> 18, (u32Value & AHCI_PORT_CMD_PMA) >> 17, (u32Value & AHCI_PORT_CMD_CPS) >> 16, (u32Value & AHCI_PORT_CMD_CR) >> 15, (u32Value & AHCI_PORT_CMD_FR) >> 14, (u32Value & AHCI_PORT_CMD_ISS) >> 13, (u32Value & AHCI_PORT_CMD_CCS) >> 8, (u32Value & AHCI_PORT_CMD_FRE) >> 4, (u32Value & AHCI_PORT_CMD_CLO) >> 3, (u32Value & AHCI_PORT_CMD_POD) >> 2, (u32Value & AHCI_PORT_CMD_SUD) >> 1, (u32Value & AHCI_PORT_CMD_ST))); /* The PxCMD.CCS bits are R/O and maintained separately. */ u32Value &= ~AHCI_PORT_CMD_CCS; if (pAhciPort->fPoweredOn && pAhciPort->fSpunUp) { if (u32Value & AHCI_PORT_CMD_CLO) { ahciLog(("%s: Command list override requested\n", __FUNCTION__)); u32Value &= ~(AHCI_PORT_TFD_BSY | AHCI_PORT_TFD_DRQ); /* Clear the CLO bit. */ u32Value &= ~(AHCI_PORT_CMD_CLO); } if (u32Value & AHCI_PORT_CMD_ST) { /* * Set engine state to running if there is a device attached and * IS.PCS is clear. */ if ( pAhciPort->fPresent && !(pAhciPort->regIS & AHCI_PORT_IS_PCS)) { ahciLog(("%s: Engine starts\n", __FUNCTION__)); u32Value |= AHCI_PORT_CMD_CR; /* If there is something in CI, kick the I/O thread. */ if ( pAhciPort->regCI > 0 && ASMAtomicReadBool(&pAhciPort->fWrkThreadSleeping)) { ASMAtomicOrU32(&pAhciPort->u32TasksNew, pAhciPort->regCI); LogFlowFunc(("Signal event semaphore\n")); int rc = PDMDevHlpSUPSemEventSignal(pDevIns, pAhciPort->hEvtProcess); AssertRC(rc); } } else { if (!pAhciPort->fPresent) ahciLog(("%s: No pDrvBase, clearing PxCMD.CR!\n", __FUNCTION__)); else ahciLog(("%s: PxIS.PCS set (PxIS=%#010x), clearing PxCMD.CR!\n", __FUNCTION__, pAhciPort->regIS)); u32Value &= ~AHCI_PORT_CMD_CR; } } else { ahciLog(("%s: Engine stops\n", __FUNCTION__)); /* Clear command issue register. */ pAhciPort->regCI = 0; pAhciPort->regSACT = 0; /* Clear current command slot. */ pAhciPort->u32CurrentCommandSlot = 0; u32Value &= ~AHCI_PORT_CMD_CR; } } else if (pAhciPort->fPresent) { if ((u32Value & AHCI_PORT_CMD_POD) && (pAhciPort->regCMD & AHCI_PORT_CMD_CPS) && !pAhciPort->fPoweredOn) { ahciLog(("%s: Power on the device\n", __FUNCTION__)); pAhciPort->fPoweredOn = true; /* * Set states in the Port Signature and SStatus registers. */ if (pAhciPort->fATAPI) pAhciPort->regSIG = AHCI_PORT_SIG_ATAPI; else pAhciPort->regSIG = AHCI_PORT_SIG_DISK; pAhciPort->regSSTS = (0x01 << 8) | /* Interface is active. */ (0x02 << 4) | /* Generation 2 (3.0GBps) speed. */ (0x03 << 0); /* Device detected and communication established. */ if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) { #ifndef IN_RING3 return VINF_IOM_R3_MMIO_WRITE; #else ahciPostFirstD2HFisIntoMemory(pDevIns, pAhciPort); ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_DHRS); if (pAhciPort->regIE & AHCI_PORT_IE_DHRE) { int rc = ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VERR_IGNORED); AssertRC(rc); } #endif } } if ((u32Value & AHCI_PORT_CMD_SUD) && pAhciPort->fPoweredOn && !pAhciPort->fSpunUp) { ahciLog(("%s: Spin up the device\n", __FUNCTION__)); pAhciPort->fSpunUp = true; } } else ahciLog(("%s: No pDrvBase, no fPoweredOn + fSpunUp, doing nothing!\n", __FUNCTION__)); if (u32Value & AHCI_PORT_CMD_FRE) { ahciLog(("%s: FIS receive enabled\n", __FUNCTION__)); u32Value |= AHCI_PORT_CMD_FR; /* Send the first D2H FIS only if it wasn't already sent. */ if ( !pAhciPort->fFirstD2HFisSent && pAhciPort->fPresent) { #ifndef IN_RING3 return VINF_IOM_R3_MMIO_WRITE; #else ahciPostFirstD2HFisIntoMemory(pDevIns, pAhciPort); pAhciPort->fFirstD2HFisSent = true; #endif } } else if (!(u32Value & AHCI_PORT_CMD_FRE)) { ahciLog(("%s: FIS receive disabled\n", __FUNCTION__)); u32Value &= ~AHCI_PORT_CMD_FR; } pAhciPort->regCMD = u32Value; return VINF_SUCCESS; } /** * Read from the port interrupt enable register. */ static VBOXSTRICTRC PortIntrEnable_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regIE=%#010x\n", __FUNCTION__, pAhciPort->regIE)); ahciLog(("%s: CPDE=%d TFEE=%d HBFE=%d HBDE=%d IFE=%d INFE=%d OFE=%d IPME=%d PRCE=%d DIE=%d PCE=%d DPE=%d UFE=%d SDBE=%d DSE=%d PSE=%d DHRE=%d\n", __FUNCTION__, (pAhciPort->regIE & AHCI_PORT_IE_CPDE) >> 31, (pAhciPort->regIE & AHCI_PORT_IE_TFEE) >> 30, (pAhciPort->regIE & AHCI_PORT_IE_HBFE) >> 29, (pAhciPort->regIE & AHCI_PORT_IE_HBDE) >> 28, (pAhciPort->regIE & AHCI_PORT_IE_IFE) >> 27, (pAhciPort->regIE & AHCI_PORT_IE_INFE) >> 26, (pAhciPort->regIE & AHCI_PORT_IE_OFE) >> 24, (pAhciPort->regIE & AHCI_PORT_IE_IPME) >> 23, (pAhciPort->regIE & AHCI_PORT_IE_PRCE) >> 22, (pAhciPort->regIE & AHCI_PORT_IE_DIE) >> 7, (pAhciPort->regIE & AHCI_PORT_IE_PCE) >> 6, (pAhciPort->regIE & AHCI_PORT_IE_DPE) >> 5, (pAhciPort->regIE & AHCI_PORT_IE_UFE) >> 4, (pAhciPort->regIE & AHCI_PORT_IE_SDBE) >> 3, (pAhciPort->regIE & AHCI_PORT_IE_DSE) >> 2, (pAhciPort->regIE & AHCI_PORT_IE_PSE) >> 1, (pAhciPort->regIE & AHCI_PORT_IE_DHRE))); *pu32Value = pAhciPort->regIE; return VINF_SUCCESS; } /** * Write to the port interrupt enable register. */ static VBOXSTRICTRC PortIntrEnable_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(iReg); ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); ahciLog(("%s: CPDE=%d TFEE=%d HBFE=%d HBDE=%d IFE=%d INFE=%d OFE=%d IPME=%d PRCE=%d DIE=%d PCE=%d DPE=%d UFE=%d SDBE=%d DSE=%d PSE=%d DHRE=%d\n", __FUNCTION__, (u32Value & AHCI_PORT_IE_CPDE) >> 31, (u32Value & AHCI_PORT_IE_TFEE) >> 30, (u32Value & AHCI_PORT_IE_HBFE) >> 29, (u32Value & AHCI_PORT_IE_HBDE) >> 28, (u32Value & AHCI_PORT_IE_IFE) >> 27, (u32Value & AHCI_PORT_IE_INFE) >> 26, (u32Value & AHCI_PORT_IE_OFE) >> 24, (u32Value & AHCI_PORT_IE_IPME) >> 23, (u32Value & AHCI_PORT_IE_PRCE) >> 22, (u32Value & AHCI_PORT_IE_DIE) >> 7, (u32Value & AHCI_PORT_IE_PCE) >> 6, (u32Value & AHCI_PORT_IE_DPE) >> 5, (u32Value & AHCI_PORT_IE_UFE) >> 4, (u32Value & AHCI_PORT_IE_SDBE) >> 3, (u32Value & AHCI_PORT_IE_DSE) >> 2, (u32Value & AHCI_PORT_IE_PSE) >> 1, (u32Value & AHCI_PORT_IE_DHRE))); u32Value &= AHCI_PORT_IE_READONLY; /* Check if some a interrupt status bit changed*/ uint32_t u32IntrStatus = ASMAtomicReadU32(&pAhciPort->regIS); int rc = VINF_SUCCESS; if (u32Value & u32IntrStatus) rc = ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VINF_IOM_R3_MMIO_WRITE); if (rc == VINF_SUCCESS) pAhciPort->regIE = u32Value; return rc; } /** * Read from the port interrupt status register. */ static VBOXSTRICTRC PortIntrSts_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regIS=%#010x\n", __FUNCTION__, pAhciPort->regIS)); ahciLog(("%s: CPDS=%d TFES=%d HBFS=%d HBDS=%d IFS=%d INFS=%d OFS=%d IPMS=%d PRCS=%d DIS=%d PCS=%d DPS=%d UFS=%d SDBS=%d DSS=%d PSS=%d DHRS=%d\n", __FUNCTION__, (pAhciPort->regIS & AHCI_PORT_IS_CPDS) >> 31, (pAhciPort->regIS & AHCI_PORT_IS_TFES) >> 30, (pAhciPort->regIS & AHCI_PORT_IS_HBFS) >> 29, (pAhciPort->regIS & AHCI_PORT_IS_HBDS) >> 28, (pAhciPort->regIS & AHCI_PORT_IS_IFS) >> 27, (pAhciPort->regIS & AHCI_PORT_IS_INFS) >> 26, (pAhciPort->regIS & AHCI_PORT_IS_OFS) >> 24, (pAhciPort->regIS & AHCI_PORT_IS_IPMS) >> 23, (pAhciPort->regIS & AHCI_PORT_IS_PRCS) >> 22, (pAhciPort->regIS & AHCI_PORT_IS_DIS) >> 7, (pAhciPort->regIS & AHCI_PORT_IS_PCS) >> 6, (pAhciPort->regIS & AHCI_PORT_IS_DPS) >> 5, (pAhciPort->regIS & AHCI_PORT_IS_UFS) >> 4, (pAhciPort->regIS & AHCI_PORT_IS_SDBS) >> 3, (pAhciPort->regIS & AHCI_PORT_IS_DSS) >> 2, (pAhciPort->regIS & AHCI_PORT_IS_PSS) >> 1, (pAhciPort->regIS & AHCI_PORT_IS_DHRS))); *pu32Value = pAhciPort->regIS; return VINF_SUCCESS; } /** * Write to the port interrupt status register. */ static VBOXSTRICTRC PortIntrSts_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); ASMAtomicAndU32(&pAhciPort->regIS, ~(u32Value & AHCI_PORT_IS_READONLY)); return VINF_SUCCESS; } /** * Read from the port FIS base address upper 32bit register. */ static VBOXSTRICTRC PortFisAddrUp_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regFBU=%#010x\n", __FUNCTION__, pAhciPort->regFBU)); *pu32Value = pAhciPort->regFBU; return VINF_SUCCESS; } /** * Write to the port FIS base address upper 32bit register. */ static VBOXSTRICTRC PortFisAddrUp_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); pAhciPort->regFBU = u32Value; pAhciPort->GCPhysAddrFb = AHCI_RTGCPHYS_FROM_U32(pAhciPort->regFBU, pAhciPort->regFB); return VINF_SUCCESS; } /** * Read from the port FIS base address register. */ static VBOXSTRICTRC PortFisAddr_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regFB=%#010x\n", __FUNCTION__, pAhciPort->regFB)); *pu32Value = pAhciPort->regFB; return VINF_SUCCESS; } /** * Write to the port FIS base address register. */ static VBOXSTRICTRC PortFisAddr_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); Assert(!(u32Value & ~AHCI_PORT_FB_RESERVED)); pAhciPort->regFB = (u32Value & AHCI_PORT_FB_RESERVED); pAhciPort->GCPhysAddrFb = AHCI_RTGCPHYS_FROM_U32(pAhciPort->regFBU, pAhciPort->regFB); return VINF_SUCCESS; } /** * Write to the port command list base address upper 32bit register. */ static VBOXSTRICTRC PortCmdLstAddrUp_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); pAhciPort->regCLBU = u32Value; pAhciPort->GCPhysAddrClb = AHCI_RTGCPHYS_FROM_U32(pAhciPort->regCLBU, pAhciPort->regCLB); return VINF_SUCCESS; } /** * Read from the port command list base address upper 32bit register. */ static VBOXSTRICTRC PortCmdLstAddrUp_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regCLBU=%#010x\n", __FUNCTION__, pAhciPort->regCLBU)); *pu32Value = pAhciPort->regCLBU; return VINF_SUCCESS; } /** * Read from the port command list base address register. */ static VBOXSTRICTRC PortCmdLstAddr_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: read regCLB=%#010x\n", __FUNCTION__, pAhciPort->regCLB)); *pu32Value = pAhciPort->regCLB; return VINF_SUCCESS; } /** * Write to the port command list base address register. */ static VBOXSTRICTRC PortCmdLstAddr_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, iReg); ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); Assert(!(u32Value & ~AHCI_PORT_CLB_RESERVED)); pAhciPort->regCLB = (u32Value & AHCI_PORT_CLB_RESERVED); pAhciPort->GCPhysAddrClb = AHCI_RTGCPHYS_FROM_U32(pAhciPort->regCLBU, pAhciPort->regCLB); return VINF_SUCCESS; } /** * Read from the global Version register. */ static VBOXSTRICTRC HbaVersion_r(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); Log(("%s: read regHbaVs=%#010x\n", __FUNCTION__, pThis->regHbaVs)); *pu32Value = pThis->regHbaVs; return VINF_SUCCESS; } /** * Read from the global Ports implemented register. */ static VBOXSTRICTRC HbaPortsImplemented_r(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); Log(("%s: read regHbaPi=%#010x\n", __FUNCTION__, pThis->regHbaPi)); *pu32Value = pThis->regHbaPi; return VINF_SUCCESS; } /** * Write to the global interrupt status register. */ static VBOXSTRICTRC HbaInterruptStatus_w(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t u32Value) { RT_NOREF(iReg); Log(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); int rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->lock, VINF_IOM_R3_MMIO_WRITE); if (rc != VINF_SUCCESS) return rc; pThis->regHbaIs &= ~(u32Value); /* * Update interrupt status register and check for ports who * set the interrupt inbetween. */ bool fClear = true; pThis->regHbaIs |= ASMAtomicXchgU32(&pThis->u32PortsInterrupted, 0); if (!pThis->regHbaIs) { unsigned i = 0; /* Check if the cleared ports have a interrupt status bit set. */ while ((u32Value > 0) && (i < AHCI_MAX_NR_PORTS_IMPL)) { if (u32Value & 0x01) { PAHCIPORT pAhciPort = &pThis->aPorts[i]; if (pAhciPort->regIE & pAhciPort->regIS) { Log(("%s: Interrupt status of port %u set -> Set interrupt again\n", __FUNCTION__, i)); ASMAtomicOrU32(&pThis->u32PortsInterrupted, 1 << i); fClear = false; break; } } u32Value >>= 1; i++; } } else fClear = false; if (fClear) ahciHbaClearInterrupt(pDevIns); else { Log(("%s: Not clearing interrupt: u32PortsInterrupted=%#010x\n", __FUNCTION__, pThis->u32PortsInterrupted)); /* * We need to set the interrupt again because the I/O APIC does not set it again even if the * line is still high. * We need to clear it first because the PCI bus only calls the interrupt controller if the state changes. */ PDMDevHlpPCISetIrq(pDevIns, 0, 0); PDMDevHlpPCISetIrq(pDevIns, 0, 1); } PDMDevHlpCritSectLeave(pDevIns, &pThis->lock); return VINF_SUCCESS; } /** * Read from the global interrupt status register. */ static VBOXSTRICTRC HbaInterruptStatus_r(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(iReg); int rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->lock, VINF_IOM_R3_MMIO_READ); if (rc != VINF_SUCCESS) return rc; uint32_t u32PortsInterrupted = ASMAtomicXchgU32(&pThis->u32PortsInterrupted, 0); PDMDevHlpCritSectLeave(pDevIns, &pThis->lock); Log(("%s: read regHbaIs=%#010x u32PortsInterrupted=%#010x\n", __FUNCTION__, pThis->regHbaIs, u32PortsInterrupted)); pThis->regHbaIs |= u32PortsInterrupted; #ifdef LOG_ENABLED Log(("%s:", __FUNCTION__)); uint32_t const cPortsImpl = RT_MIN(pThis->cPortsImpl, RT_ELEMENTS(pThis->aPorts)); for (unsigned i = 0; i < cPortsImpl; i++) { if ((pThis->regHbaIs >> i) & 0x01) Log((" P%d", i)); } Log(("\n")); #endif *pu32Value = pThis->regHbaIs; return VINF_SUCCESS; } /** * Write to the global control register. */ static VBOXSTRICTRC HbaControl_w(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t u32Value) { Log(("%s: write u32Value=%#010x\n" "%s: AE=%d IE=%d HR=%d\n", __FUNCTION__, u32Value, __FUNCTION__, (u32Value & AHCI_HBA_CTRL_AE) >> 31, (u32Value & AHCI_HBA_CTRL_IE) >> 1, (u32Value & AHCI_HBA_CTRL_HR))); RT_NOREF(iReg); #ifndef IN_RING3 RT_NOREF(pDevIns, pThis, u32Value); return VINF_IOM_R3_MMIO_WRITE; #else /* * Increase the active thread counter because we might set the host controller * reset bit. */ ASMAtomicIncU32(&pThis->cThreadsActive); ASMAtomicWriteU32(&pThis->regHbaCtrl, (u32Value & AHCI_HBA_CTRL_RW_MASK) | AHCI_HBA_CTRL_AE); /* * Do the HBA reset if requested and there is no other active thread at the moment, * the work is deferred to the last active thread otherwise. */ uint32_t cThreadsActive = ASMAtomicDecU32(&pThis->cThreadsActive); if ( (u32Value & AHCI_HBA_CTRL_HR) && !cThreadsActive) ahciR3HBAReset(pDevIns, pThis, PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC)); return VINF_SUCCESS; #endif } /** * Read the global control register. */ static VBOXSTRICTRC HbaControl_r(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); Log(("%s: read regHbaCtrl=%#010x\n" "%s: AE=%d IE=%d HR=%d\n", __FUNCTION__, pThis->regHbaCtrl, __FUNCTION__, (pThis->regHbaCtrl & AHCI_HBA_CTRL_AE) >> 31, (pThis->regHbaCtrl & AHCI_HBA_CTRL_IE) >> 1, (pThis->regHbaCtrl & AHCI_HBA_CTRL_HR))); *pu32Value = pThis->regHbaCtrl; return VINF_SUCCESS; } /** * Read the global capabilities register. */ static VBOXSTRICTRC HbaCapabilities_r(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); Log(("%s: read regHbaCap=%#010x\n" "%s: S64A=%d SNCQ=%d SIS=%d SSS=%d SALP=%d SAL=%d SCLO=%d ISS=%d SNZO=%d SAM=%d SPM=%d PMD=%d SSC=%d PSC=%d NCS=%d NP=%d\n", __FUNCTION__, pThis->regHbaCap, __FUNCTION__, (pThis->regHbaCap & AHCI_HBA_CAP_S64A) >> 31, (pThis->regHbaCap & AHCI_HBA_CAP_SNCQ) >> 30, (pThis->regHbaCap & AHCI_HBA_CAP_SIS) >> 28, (pThis->regHbaCap & AHCI_HBA_CAP_SSS) >> 27, (pThis->regHbaCap & AHCI_HBA_CAP_SALP) >> 26, (pThis->regHbaCap & AHCI_HBA_CAP_SAL) >> 25, (pThis->regHbaCap & AHCI_HBA_CAP_SCLO) >> 24, (pThis->regHbaCap & AHCI_HBA_CAP_ISS) >> 20, (pThis->regHbaCap & AHCI_HBA_CAP_SNZO) >> 19, (pThis->regHbaCap & AHCI_HBA_CAP_SAM) >> 18, (pThis->regHbaCap & AHCI_HBA_CAP_SPM) >> 17, (pThis->regHbaCap & AHCI_HBA_CAP_PMD) >> 15, (pThis->regHbaCap & AHCI_HBA_CAP_SSC) >> 14, (pThis->regHbaCap & AHCI_HBA_CAP_PSC) >> 13, (pThis->regHbaCap & AHCI_HBA_CAP_NCS) >> 8, (pThis->regHbaCap & AHCI_HBA_CAP_NP))); *pu32Value = pThis->regHbaCap; return VINF_SUCCESS; } /** * Write to the global command completion coalescing control register. */ static VBOXSTRICTRC HbaCccCtl_w(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t u32Value) { RT_NOREF(iReg); Log(("%s: write u32Value=%#010x\n" "%s: TV=%d CC=%d INT=%d EN=%d\n", __FUNCTION__, u32Value, __FUNCTION__, AHCI_HBA_CCC_CTL_TV_GET(u32Value), AHCI_HBA_CCC_CTL_CC_GET(u32Value), AHCI_HBA_CCC_CTL_INT_GET(u32Value), (u32Value & AHCI_HBA_CCC_CTL_EN))); pThis->regHbaCccCtl = u32Value; pThis->uCccTimeout = AHCI_HBA_CCC_CTL_TV_GET(u32Value); pThis->uCccPortNr = AHCI_HBA_CCC_CTL_INT_GET(u32Value); pThis->uCccNr = AHCI_HBA_CCC_CTL_CC_GET(u32Value); if (u32Value & AHCI_HBA_CCC_CTL_EN) PDMDevHlpTimerSetMillies(pDevIns, pThis->hHbaCccTimer, pThis->uCccTimeout); /* Arm the timer */ else PDMDevHlpTimerStop(pDevIns, pThis->hHbaCccTimer); return VINF_SUCCESS; } /** * Read the global command completion coalescing control register. */ static VBOXSTRICTRC HbaCccCtl_r(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); Log(("%s: read regHbaCccCtl=%#010x\n" "%s: TV=%d CC=%d INT=%d EN=%d\n", __FUNCTION__, pThis->regHbaCccCtl, __FUNCTION__, AHCI_HBA_CCC_CTL_TV_GET(pThis->regHbaCccCtl), AHCI_HBA_CCC_CTL_CC_GET(pThis->regHbaCccCtl), AHCI_HBA_CCC_CTL_INT_GET(pThis->regHbaCccCtl), (pThis->regHbaCccCtl & AHCI_HBA_CCC_CTL_EN))); *pu32Value = pThis->regHbaCccCtl; return VINF_SUCCESS; } /** * Write to the global command completion coalescing ports register. */ static VBOXSTRICTRC HbaCccPorts_w(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, iReg); Log(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); pThis->regHbaCccPorts = u32Value; return VINF_SUCCESS; } /** * Read the global command completion coalescing ports register. */ static VBOXSTRICTRC HbaCccPorts_r(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); Log(("%s: read regHbaCccPorts=%#010x\n", __FUNCTION__, pThis->regHbaCccPorts)); #ifdef LOG_ENABLED Log(("%s:", __FUNCTION__)); uint32_t const cPortsImpl = RT_MIN(pThis->cPortsImpl, RT_ELEMENTS(pThis->aPorts)); for (unsigned i = 0; i < cPortsImpl; i++) { if ((pThis->regHbaCccPorts >> i) & 0x01) Log((" P%d", i)); } Log(("\n")); #endif *pu32Value = pThis->regHbaCccPorts; return VINF_SUCCESS; } /** * Invalid write to global register */ static VBOXSTRICTRC HbaInvalid_w(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, iReg, u32Value); Log(("%s: Write denied!!! iReg=%u u32Value=%#010x\n", __FUNCTION__, iReg, u32Value)); return VINF_SUCCESS; } /** * Invalid Port write. */ static VBOXSTRICTRC PortInvalid_w(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, pAhciPort, iReg, u32Value); ahciLog(("%s: Write denied!!! iReg=%u u32Value=%#010x\n", __FUNCTION__, iReg, u32Value)); return VINF_SUCCESS; } /** * Invalid Port read. */ static VBOXSTRICTRC PortInvalid_r(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, pAhciPort, iReg, pu32Value); ahciLog(("%s: Read denied!!! iReg=%u\n", __FUNCTION__, iReg)); return VINF_SUCCESS; } /** * Register descriptor table for global HBA registers */ static const AHCIOPREG g_aOpRegs[] = { {"HbaCapabilites", HbaCapabilities_r, HbaInvalid_w}, /* Readonly */ {"HbaControl" , HbaControl_r, HbaControl_w}, {"HbaInterruptStatus", HbaInterruptStatus_r, HbaInterruptStatus_w}, {"HbaPortsImplemented", HbaPortsImplemented_r, HbaInvalid_w}, /* Readonly */ {"HbaVersion", HbaVersion_r, HbaInvalid_w}, /* ReadOnly */ {"HbaCccCtl", HbaCccCtl_r, HbaCccCtl_w}, {"HbaCccPorts", HbaCccPorts_r, HbaCccPorts_w}, }; /** * Register descriptor table for port registers */ static const AHCIPORTOPREG g_aPortOpRegs[] = { {"PortCmdLstAddr", PortCmdLstAddr_r, PortCmdLstAddr_w}, {"PortCmdLstAddrUp", PortCmdLstAddrUp_r, PortCmdLstAddrUp_w}, {"PortFisAddr", PortFisAddr_r, PortFisAddr_w}, {"PortFisAddrUp", PortFisAddrUp_r, PortFisAddrUp_w}, {"PortIntrSts", PortIntrSts_r, PortIntrSts_w}, {"PortIntrEnable", PortIntrEnable_r, PortIntrEnable_w}, {"PortCmd", PortCmd_r, PortCmd_w}, {"PortReserved1", PortInvalid_r, PortInvalid_w}, /* Not used. */ {"PortTaskFileData", PortTaskFileData_r, PortInvalid_w}, /* Readonly */ {"PortSignature", PortSignature_r, PortInvalid_w}, /* Readonly */ {"PortSStatus", PortSStatus_r, PortInvalid_w}, /* Readonly */ {"PortSControl", PortSControl_r, PortSControl_w}, {"PortSError", PortSError_r, PortSError_w}, {"PortSActive", PortSActive_r, PortSActive_w}, {"PortCmdIssue", PortCmdIssue_r, PortCmdIssue_w}, {"PortReserved2", PortInvalid_r, PortInvalid_w}, /* Not used. */ }; #ifdef IN_RING3 /** * Reset initiated by system software for one port. * * @param pAhciPort The port to reset, shared bits. * @param pAhciPortR3 The port to reset, ring-3 bits. */ static void ahciR3PortSwReset(PAHCIPORT pAhciPort, PAHCIPORTR3 pAhciPortR3) { bool fAllTasksCanceled; /* Cancel all tasks first. */ fAllTasksCanceled = ahciR3CancelActiveTasks(pAhciPortR3); Assert(fAllTasksCanceled); Assert(pAhciPort->cTasksActive == 0); pAhciPort->regIS = 0; pAhciPort->regIE = 0; pAhciPort->regCMD = AHCI_PORT_CMD_CPD | /* Cold presence detection */ AHCI_PORT_CMD_SUD | /* Device has spun up. */ AHCI_PORT_CMD_POD; /* Port is powered on. */ /* Hotplugging supported?. */ if (pAhciPort->fHotpluggable) pAhciPort->regCMD |= AHCI_PORT_CMD_HPCP; pAhciPort->regTFD = (1 << 8) | ATA_STAT_SEEK | ATA_STAT_WRERR; pAhciPort->regSIG = UINT32_MAX; pAhciPort->regSSTS = 0; pAhciPort->regSCTL = 0; pAhciPort->regSERR = 0; pAhciPort->regSACT = 0; pAhciPort->regCI = 0; pAhciPort->fResetDevice = false; pAhciPort->fPoweredOn = true; pAhciPort->fSpunUp = true; pAhciPort->cMultSectors = ATA_MAX_MULT_SECTORS; pAhciPort->uATATransferMode = ATA_MODE_UDMA | 6; pAhciPort->u32TasksNew = 0; pAhciPort->u32TasksRedo = 0; pAhciPort->u32TasksFinished = 0; pAhciPort->u32QueuedTasksFinished = 0; pAhciPort->u32CurrentCommandSlot = 0; if (pAhciPort->fPresent) { pAhciPort->regCMD |= AHCI_PORT_CMD_CPS; /* Indicate that there is a device on that port */ if (pAhciPort->fPoweredOn) { /* * Set states in the Port Signature and SStatus registers. */ if (pAhciPort->fATAPI) pAhciPort->regSIG = AHCI_PORT_SIG_ATAPI; else pAhciPort->regSIG = AHCI_PORT_SIG_DISK; pAhciPort->regSSTS = (0x01 << 8) | /* Interface is active. */ (0x02 << 4) | /* Generation 2 (3.0GBps) speed. */ (0x03 << 0); /* Device detected and communication established. */ } } } /** * Hardware reset used for machine power on and reset. * * @param pAhciPort The port to reset, shared bits. */ static void ahciPortHwReset(PAHCIPORT pAhciPort) { /* Reset the address registers. */ pAhciPort->regCLB = 0; pAhciPort->regCLBU = 0; pAhciPort->regFB = 0; pAhciPort->regFBU = 0; /* Reset calculated addresses. */ pAhciPort->GCPhysAddrClb = 0; pAhciPort->GCPhysAddrFb = 0; } /** * Create implemented ports bitmap. * * @returns 32bit bitmask with a bit set for every implemented port. * @param cPorts Number of ports. */ static uint32_t ahciGetPortsImplemented(unsigned cPorts) { uint32_t uPortsImplemented = 0; for (unsigned i = 0; i < cPorts; i++) uPortsImplemented |= (1 << i); return uPortsImplemented; } /** * Reset the entire HBA. * * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pThisCC The ring-3 AHCI state. */ static void ahciR3HBAReset(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIR3 pThisCC) { unsigned i; int rc = VINF_SUCCESS; LogRel(("AHCI#%u: Reset the HBA\n", pDevIns->iInstance)); /* Stop the CCC timer. */ if (pThis->regHbaCccCtl & AHCI_HBA_CCC_CTL_EN) { rc = PDMDevHlpTimerStop(pDevIns, pThis->hHbaCccTimer); if (RT_FAILURE(rc)) AssertMsgFailed(("%s: Failed to stop timer!\n", __FUNCTION__)); } /* Reset every port */ uint32_t const cPortsImpl = RT_MIN(pThis->cPortsImpl, RT_ELEMENTS(pThisCC->aPorts)); for (i = 0; i < cPortsImpl; i++) { PAHCIPORT pAhciPort = &pThis->aPorts[i]; PAHCIPORTR3 pAhciPortR3 = &pThisCC->aPorts[i]; pAhciPort->iLUN = i; pAhciPortR3->iLUN = i; ahciR3PortSwReset(pAhciPort, pAhciPortR3); } /* Init Global registers */ pThis->regHbaCap = AHCI_HBA_CAP_ISS_SHIFT(AHCI_HBA_CAP_ISS_GEN2) | AHCI_HBA_CAP_S64A /* 64bit addressing supported */ | AHCI_HBA_CAP_SAM /* AHCI mode only */ | AHCI_HBA_CAP_SNCQ /* Support native command queuing */ | AHCI_HBA_CAP_SSS /* Staggered spin up */ | AHCI_HBA_CAP_CCCS /* Support command completion coalescing */ | AHCI_HBA_CAP_NCS_SET(pThis->cCmdSlotsAvail) /* Number of command slots we support */ | AHCI_HBA_CAP_NP_SET(pThis->cPortsImpl); /* Number of supported ports */ pThis->regHbaCtrl = AHCI_HBA_CTRL_AE; pThis->regHbaPi = ahciGetPortsImplemented(pThis->cPortsImpl); pThis->regHbaVs = AHCI_HBA_VS_MJR | AHCI_HBA_VS_MNR; pThis->regHbaCccCtl = 0; pThis->regHbaCccPorts = 0; pThis->uCccTimeout = 0; pThis->uCccPortNr = 0; pThis->uCccNr = 0; /* Clear pending interrupts. */ pThis->regHbaIs = 0; pThis->u32PortsInterrupted = 0; ahciHbaClearInterrupt(pDevIns); pThis->f64BitAddr = false; pThis->u32PortsInterrupted = 0; pThis->f8ByteMMIO4BytesWrittenSuccessfully = false; /* Clear the HBA Reset bit */ pThis->regHbaCtrl &= ~AHCI_HBA_CTRL_HR; } #endif /* IN_RING3 */ /** * Reads from a AHCI controller register. * * @returns Strict VBox status code. * * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param uReg The register to write. * @param pv Where to store the result. * @param cb Number of bytes read. */ static VBOXSTRICTRC ahciRegisterRead(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t uReg, void *pv, unsigned cb) { VBOXSTRICTRC rc; uint32_t iReg; /* * If the access offset is smaller than AHCI_HBA_GLOBAL_SIZE the guest accesses the global registers. * Otherwise it accesses the registers of a port. */ if (uReg < AHCI_HBA_GLOBAL_SIZE) { iReg = uReg >> 2; Log3(("%s: Trying to read from global register %u\n", __FUNCTION__, iReg)); if (iReg < RT_ELEMENTS(g_aOpRegs)) { const AHCIOPREG *pReg = &g_aOpRegs[iReg]; rc = pReg->pfnRead(pDevIns, pThis, iReg, (uint32_t *)pv); } else { Log3(("%s: Trying to read global register %u/%u!!!\n", __FUNCTION__, iReg, RT_ELEMENTS(g_aOpRegs))); *(uint32_t *)pv = 0; rc = VINF_SUCCESS; } } else { uint32_t iRegOffset; uint32_t iPort; /* Calculate accessed port. */ uReg -= AHCI_HBA_GLOBAL_SIZE; iPort = uReg / AHCI_PORT_REGISTER_SIZE; iRegOffset = (uReg % AHCI_PORT_REGISTER_SIZE); iReg = iRegOffset >> 2; Log3(("%s: Trying to read from port %u and register %u\n", __FUNCTION__, iPort, iReg)); if (RT_LIKELY( iPort < RT_MIN(pThis->cPortsImpl, RT_ELEMENTS(pThis->aPorts)) && iReg < RT_ELEMENTS(g_aPortOpRegs))) { const AHCIPORTOPREG *pPortReg = &g_aPortOpRegs[iReg]; rc = pPortReg->pfnRead(pDevIns, pThis, &pThis->aPorts[iPort], iReg, (uint32_t *)pv); } else { Log3(("%s: Trying to read port %u register %u/%u!!!\n", __FUNCTION__, iPort, iReg, RT_ELEMENTS(g_aPortOpRegs))); rc = VINF_IOM_MMIO_UNUSED_00; } /* * Windows Vista tries to read one byte from some registers instead of four. * Correct the value according to the read size. */ if (RT_SUCCESS(rc) && cb != sizeof(uint32_t)) { switch (cb) { case 1: { uint8_t uNewValue; uint8_t *p = (uint8_t *)pv; iRegOffset &= 3; Log3(("%s: iRegOffset=%u\n", __FUNCTION__, iRegOffset)); uNewValue = p[iRegOffset]; /* Clear old value */ *(uint32_t *)pv = 0; *(uint8_t *)pv = uNewValue; break; } default: ASSERT_GUEST_MSG_FAILED(("%s: unsupported access width cb=%d iPort=%x iRegOffset=%x iReg=%x!!!\n", __FUNCTION__, cb, iPort, iRegOffset, iReg)); } } } return rc; } /** * Writes a value to one of the AHCI controller registers. * * @returns Strict VBox status code. * * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param offReg The offset of the register to write to. * @param u32Value The value to write. */ static VBOXSTRICTRC ahciRegisterWrite(PPDMDEVINS pDevIns, PAHCI pThis, uint32_t offReg, uint32_t u32Value) { VBOXSTRICTRC rc; uint32_t iReg; /* * If the access offset is smaller than 100h the guest accesses the global registers. * Otherwise it accesses the registers of a port. */ if (offReg < AHCI_HBA_GLOBAL_SIZE) { Log3(("Write global HBA register\n")); iReg = offReg >> 2; if (iReg < RT_ELEMENTS(g_aOpRegs)) { const AHCIOPREG *pReg = &g_aOpRegs[iReg]; rc = pReg->pfnWrite(pDevIns, pThis, iReg, u32Value); } else { Log3(("%s: Trying to write global register %u/%u!!!\n", __FUNCTION__, iReg, RT_ELEMENTS(g_aOpRegs))); rc = VINF_SUCCESS; } } else { uint32_t iPort; Log3(("Write Port register\n")); /* Calculate accessed port. */ offReg -= AHCI_HBA_GLOBAL_SIZE; iPort = offReg / AHCI_PORT_REGISTER_SIZE; iReg = (offReg % AHCI_PORT_REGISTER_SIZE) >> 2; Log3(("%s: Trying to write to port %u and register %u\n", __FUNCTION__, iPort, iReg)); if (RT_LIKELY( iPort < RT_MIN(pThis->cPortsImpl, RT_ELEMENTS(pThis->aPorts)) && iReg < RT_ELEMENTS(g_aPortOpRegs))) { const AHCIPORTOPREG *pPortReg = &g_aPortOpRegs[iReg]; rc = pPortReg->pfnWrite(pDevIns, pThis, &pThis->aPorts[iPort], iReg, u32Value); } else { Log3(("%s: Trying to write port %u register %u/%u!!!\n", __FUNCTION__, iPort, iReg, RT_ELEMENTS(g_aPortOpRegs))); rc = VINF_SUCCESS; } } return rc; } /** * @callback_method_impl{FNIOMMMIONEWWRITE} */ static DECLCALLBACK(VBOXSTRICTRC) ahciMMIORead(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS off, void *pv, unsigned cb) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); Log2(("#%d ahciMMIORead: pvUser=%p:{%.*Rhxs} cb=%d off=%RGp\n", pDevIns->iInstance, pv, cb, pv, cb, off)); RT_NOREF(pvUser); VBOXSTRICTRC rc = ahciRegisterRead(pDevIns, pThis, off, pv, cb); Log2(("#%d ahciMMIORead: return pvUser=%p:{%.*Rhxs} cb=%d off=%RGp rc=%Rrc\n", pDevIns->iInstance, pv, cb, pv, cb, off, VBOXSTRICTRC_VAL(rc))); return rc; } /** * @callback_method_impl{FNIOMMMIONEWWRITE} */ static DECLCALLBACK(VBOXSTRICTRC) ahciMMIOWrite(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS off, void const *pv, unsigned cb) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); Assert(cb == 4 || cb == 8); /* Assert IOM flags & sanity */ Assert(!(off & (cb - 1))); /* Ditto. */ /* Break up 64 bits writes into two dword writes. */ /** @todo Eliminate this code once the IOM/EM starts taking care of these * situations. */ if (cb == 8) { /* * Only write the first 4 bytes if they weren't already. * It is possible that the last write to the register caused a world * switch and we entered this function again. * Writing the first 4 bytes again could cause indeterminate behavior * which can cause errors in the guest. */ VBOXSTRICTRC rc = VINF_SUCCESS; if (!pThis->f8ByteMMIO4BytesWrittenSuccessfully) { rc = ahciMMIOWrite(pDevIns, pvUser, off, pv, 4); if (rc != VINF_SUCCESS) return rc; pThis->f8ByteMMIO4BytesWrittenSuccessfully = true; } rc = ahciMMIOWrite(pDevIns, pvUser, off + 4, (uint8_t *)pv + 4, 4); /* * Reset flag again so that the first 4 bytes are written again on the next * 8byte MMIO access. */ if (rc == VINF_SUCCESS) pThis->f8ByteMMIO4BytesWrittenSuccessfully = false; return rc; } /* Do the access. */ Log2(("#%d ahciMMIOWrite: pvUser=%p:{%.*Rhxs} cb=%d GCPhysAddr=%RGp\n", pDevIns->iInstance, pv, cb, pv, cb, off)); return ahciRegisterWrite(pDevIns, pThis, off, *(uint32_t const *)pv); } /** * @callback_method_impl{FNIOMIOPORTNEWOUT, * Fake IDE port handler provided to make solaris happy.} */ static DECLCALLBACK(VBOXSTRICTRC) ahciLegacyFakeWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb) { RT_NOREF(pDevIns, pvUser, offPort, u32, cb); ASSERT_GUEST_MSG_FAILED(("Should not happen\n")); return VINF_SUCCESS; } /** * @callback_method_impl{FNIOMIOPORTNEWIN, * Fake IDE port handler provided to make solaris happy.} */ static DECLCALLBACK(VBOXSTRICTRC) ahciLegacyFakeRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t *pu32, unsigned cb) { /** @todo we should set *pu32 to something. */ RT_NOREF(pDevIns, pvUser, offPort, pu32, cb); ASSERT_GUEST_MSG_FAILED(("Should not happen\n")); return VINF_SUCCESS; } /** * @callback_method_impl{FNIOMIOPORTNEWOUT, * I/O port handler for writes to the index/data register pair.} */ static DECLCALLBACK(VBOXSTRICTRC) ahciIdxDataWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); VBOXSTRICTRC rc = VINF_SUCCESS; RT_NOREF(pvUser, cb); if (offPort >= 8) { ASSERT_GUEST(cb == 4); uint32_t const iReg = (offPort - 8) / 4; if (iReg == 0) { /* Write the index register. */ pThis->regIdx = u32; } else { /** @todo range check? */ ASSERT_GUEST(iReg == 1); rc = ahciRegisterWrite(pDevIns, pThis, pThis->regIdx, u32); if (rc == VINF_IOM_R3_MMIO_WRITE) rc = VINF_IOM_R3_IOPORT_WRITE; } } /* else: ignore */ Log2(("#%d ahciIdxDataWrite: pu32=%p:{%.*Rhxs} cb=%d offPort=%#x rc=%Rrc\n", pDevIns->iInstance, &u32, cb, &u32, cb, offPort, VBOXSTRICTRC_VAL(rc))); return rc; } /** * @callback_method_impl{FNIOMIOPORTNEWOUT, * I/O port handler for reads from the index/data register pair.} */ static DECLCALLBACK(VBOXSTRICTRC) ahciIdxDataRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t *pu32, unsigned cb) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); VBOXSTRICTRC rc = VINF_SUCCESS; RT_NOREF(pvUser); if (offPort >= 8) { ASSERT_GUEST(cb == 4); uint32_t const iReg = (offPort - 8) / 4; if (iReg == 0) { /* Read the index register. */ *pu32 = pThis->regIdx; } else { /** @todo range check? */ ASSERT_GUEST(iReg == 1); rc = ahciRegisterRead(pDevIns, pThis, pThis->regIdx, pu32, cb); if (rc == VINF_IOM_R3_MMIO_READ) rc = VINF_IOM_R3_IOPORT_READ; else if (rc == VINF_IOM_MMIO_UNUSED_00) rc = VERR_IOM_IOPORT_UNUSED; } } else *pu32 = UINT32_MAX; Log2(("#%d ahciIdxDataRead: pu32=%p:{%.*Rhxs} cb=%d offPort=%#x rc=%Rrc\n", pDevIns->iInstance, pu32, cb, pu32, cb, offPort, VBOXSTRICTRC_VAL(rc))); return rc; } #ifdef IN_RING3 /* -=-=-=-=-=- PAHCI::ILeds -=-=-=-=-=- */ /** * Gets the pointer to the status LED of a unit. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit which status LED we desire. * @param ppLed Where to store the LED pointer. */ static DECLCALLBACK(int) ahciR3Status_QueryStatusLed(PPDMILEDPORTS pInterface, unsigned iLUN, PPDMLED *ppLed) { PAHCICC pThisCC = RT_FROM_MEMBER(pInterface, AHCICC, ILeds); if (iLUN < AHCI_MAX_NR_PORTS_IMPL) { PAHCI pThis = PDMDEVINS_2_DATA(pThisCC->pDevIns, PAHCI); *ppLed = &pThis->aPorts[iLUN].Led; Assert((*ppLed)->u32Magic == PDMLED_MAGIC); return VINF_SUCCESS; } return VERR_PDM_LUN_NOT_FOUND; } /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) ahciR3Status_QueryInterface(PPDMIBASE pInterface, const char *pszIID) { PAHCICC pThisCC = RT_FROM_MEMBER(pInterface, AHCICC, IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThisCC->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMILEDPORTS, &pThisCC->ILeds); return NULL; } /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) ahciR3PortQueryInterface(PPDMIBASE pInterface, const char *pszIID) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pAhciPortR3->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMEDIAPORT, &pAhciPortR3->IPort); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMEDIAEXPORT, &pAhciPortR3->IMediaExPort); return NULL; } /** * @interface_method_impl{PDMIMEDIAPORT,pfnQueryDeviceLocation} */ static DECLCALLBACK(int) ahciR3PortQueryDeviceLocation(PPDMIMEDIAPORT pInterface, const char **ppcszController, uint32_t *piInstance, uint32_t *piLUN) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IPort); PPDMDEVINS pDevIns = pAhciPortR3->pDevIns; AssertPtrReturn(ppcszController, VERR_INVALID_POINTER); AssertPtrReturn(piInstance, VERR_INVALID_POINTER); AssertPtrReturn(piLUN, VERR_INVALID_POINTER); *ppcszController = pDevIns->pReg->szName; *piInstance = pDevIns->iInstance; *piLUN = pAhciPortR3->iLUN; return VINF_SUCCESS; } /** * @interface_method_impl{PDMIMEDIAPORT,pfnQueryScsiInqStrings} */ static DECLCALLBACK(int) ahciR3PortQueryScsiInqStrings(PPDMIMEDIAPORT pInterface, const char **ppszVendorId, const char **ppszProductId, const char **ppszRevision) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IPort); PAHCI pThis = PDMDEVINS_2_DATA(pAhciPortR3->pDevIns, PAHCI); PAHCIPORT pAhciPort = &RT_SAFE_SUBSCRIPT(pThis->aPorts, pAhciPortR3->iLUN); if (ppszVendorId) *ppszVendorId = &pAhciPort->szInquiryVendorId[0]; if (ppszProductId) *ppszProductId = &pAhciPort->szInquiryProductId[0]; if (ppszRevision) *ppszRevision = &pAhciPort->szInquiryRevision[0]; return VINF_SUCCESS; } #ifdef LOG_ENABLED /** * Dump info about the FIS * * @returns nothing * @param pAhciPort The port the command FIS was read from (shared bits). * @param cmdFis The FIS to print info from. */ static void ahciDumpFisInfo(PAHCIPORT pAhciPort, uint8_t *cmdFis) { ahciLog(("%s: *** Begin FIS info dump. ***\n", __FUNCTION__)); /* Print FIS type. */ switch (cmdFis[AHCI_CMDFIS_TYPE]) { case AHCI_CMDFIS_TYPE_H2D: { ahciLog(("%s: Command Fis type: H2D\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d bytes\n", __FUNCTION__, AHCI_CMDFIS_TYPE_H2D_SIZE)); if (cmdFis[AHCI_CMDFIS_BITS] & AHCI_CMDFIS_C) ahciLog(("%s: Command register update\n", __FUNCTION__)); else ahciLog(("%s: Control register update\n", __FUNCTION__)); ahciLog(("%s: CMD=%#04x \"%s\"\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CMD], ATACmdText(cmdFis[AHCI_CMDFIS_CMD]))); ahciLog(("%s: FEAT=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_FET])); ahciLog(("%s: SECTN=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_SECTN])); ahciLog(("%s: CYLL=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CYLL])); ahciLog(("%s: CYLH=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CYLH])); ahciLog(("%s: HEAD=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_HEAD])); ahciLog(("%s: SECTNEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_SECTNEXP])); ahciLog(("%s: CYLLEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CYLLEXP])); ahciLog(("%s: CYLHEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CYLHEXP])); ahciLog(("%s: FETEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_FETEXP])); ahciLog(("%s: SECTC=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_SECTC])); ahciLog(("%s: SECTCEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_SECTCEXP])); ahciLog(("%s: CTL=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CTL])); if (cmdFis[AHCI_CMDFIS_CTL] & AHCI_CMDFIS_CTL_SRST) ahciLog(("%s: Reset bit is set\n", __FUNCTION__)); break; } case AHCI_CMDFIS_TYPE_D2H: { ahciLog(("%s: Command Fis type D2H\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_D2H_SIZE)); break; } case AHCI_CMDFIS_TYPE_SETDEVBITS: { ahciLog(("%s: Command Fis type Set Device Bits\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_SETDEVBITS_SIZE)); break; } case AHCI_CMDFIS_TYPE_DMAACTD2H: { ahciLog(("%s: Command Fis type DMA Activate H2D\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_DMAACTD2H_SIZE)); break; } case AHCI_CMDFIS_TYPE_DMASETUP: { ahciLog(("%s: Command Fis type DMA Setup\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_DMASETUP_SIZE)); break; } case AHCI_CMDFIS_TYPE_PIOSETUP: { ahciLog(("%s: Command Fis type PIO Setup\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_PIOSETUP_SIZE)); break; } case AHCI_CMDFIS_TYPE_DATA: { ahciLog(("%s: Command Fis type Data\n", __FUNCTION__)); break; } default: ahciLog(("%s: ERROR Unknown command FIS type\n", __FUNCTION__)); break; } ahciLog(("%s: *** End FIS info dump. ***\n", __FUNCTION__)); } /** * Dump info about the command header * * @returns nothing * @param pAhciPort Pointer to the port the command header was read from * (shared bits). * @param pCmdHdr The command header to print info from. */ static void ahciDumpCmdHdrInfo(PAHCIPORT pAhciPort, CmdHdr *pCmdHdr) { ahciLog(("%s: *** Begin command header info dump. ***\n", __FUNCTION__)); ahciLog(("%s: Number of Scatter/Gatther List entries: %u\n", __FUNCTION__, AHCI_CMDHDR_PRDTL_ENTRIES(pCmdHdr->u32DescInf))); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_C) ahciLog(("%s: Clear busy upon R_OK\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_B) ahciLog(("%s: BIST Fis\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_R) ahciLog(("%s: Device Reset Fis\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_P) ahciLog(("%s: Command prefetchable\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_W) ahciLog(("%s: Device write\n", __FUNCTION__)); else ahciLog(("%s: Device read\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_A) ahciLog(("%s: ATAPI command\n", __FUNCTION__)); else ahciLog(("%s: ATA command\n", __FUNCTION__)); ahciLog(("%s: Command FIS length %u DW\n", __FUNCTION__, (pCmdHdr->u32DescInf & AHCI_CMDHDR_CFL_MASK))); ahciLog(("%s: *** End command header info dump. ***\n", __FUNCTION__)); } #endif /* LOG_ENABLED */ /** * Post the first D2H FIS from the device into guest memory. * * @returns nothing * @param pDevIns The device instance. * @param pAhciPort Pointer to the port which "receives" the FIS (shared bits). */ static void ahciPostFirstD2HFisIntoMemory(PPDMDEVINS pDevIns, PAHCIPORT pAhciPort) { uint8_t d2hFis[AHCI_CMDFIS_TYPE_D2H_SIZE]; pAhciPort->fFirstD2HFisSent = true; ahciLog(("%s: Sending First D2H FIS from FIFO\n", __FUNCTION__)); memset(&d2hFis[0], 0, sizeof(d2hFis)); d2hFis[AHCI_CMDFIS_TYPE] = AHCI_CMDFIS_TYPE_D2H; d2hFis[AHCI_CMDFIS_ERR] = 0x01; d2hFis[AHCI_CMDFIS_STS] = 0x00; /* Set the signature based on the device type. */ if (pAhciPort->fATAPI) { d2hFis[AHCI_CMDFIS_CYLL] = 0x14; d2hFis[AHCI_CMDFIS_CYLH] = 0xeb; } else { d2hFis[AHCI_CMDFIS_CYLL] = 0x00; d2hFis[AHCI_CMDFIS_CYLH] = 0x00; } d2hFis[AHCI_CMDFIS_HEAD] = 0x00; d2hFis[AHCI_CMDFIS_SECTN] = 0x01; d2hFis[AHCI_CMDFIS_SECTC] = 0x01; pAhciPort->regTFD = (1 << 8) | ATA_STAT_SEEK | ATA_STAT_WRERR; if (!pAhciPort->fATAPI) pAhciPort->regTFD |= ATA_STAT_READY; ahciPostFisIntoMemory(pDevIns, pAhciPort, AHCI_CMDFIS_TYPE_D2H, d2hFis); } /** * Post the FIS in the memory area allocated by the guest and set interrupt if necessary. * * @returns VBox status code * @param pDevIns The device instance. * @param pAhciPort The port which "receives" the FIS(shared bits). * @param uFisType The type of the FIS. * @param pCmdFis Pointer to the FIS which is to be posted into memory. */ static int ahciPostFisIntoMemory(PPDMDEVINS pDevIns, PAHCIPORT pAhciPort, unsigned uFisType, uint8_t *pCmdFis) { int rc = VINF_SUCCESS; RTGCPHYS GCPhysAddrRecFis = pAhciPort->GCPhysAddrFb; unsigned cbFis = 0; ahciLog(("%s: pAhciPort=%p uFisType=%u pCmdFis=%p\n", __FUNCTION__, pAhciPort, uFisType, pCmdFis)); if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) { AssertMsg(GCPhysAddrRecFis, ("%s: GCPhysAddrRecFis is 0\n", __FUNCTION__)); /* Determine the offset and size of the FIS based on uFisType. */ switch (uFisType) { case AHCI_CMDFIS_TYPE_D2H: { GCPhysAddrRecFis += AHCI_RECFIS_RFIS_OFFSET; cbFis = AHCI_CMDFIS_TYPE_D2H_SIZE; break; } case AHCI_CMDFIS_TYPE_SETDEVBITS: { GCPhysAddrRecFis += AHCI_RECFIS_SDBFIS_OFFSET; cbFis = AHCI_CMDFIS_TYPE_SETDEVBITS_SIZE; break; } case AHCI_CMDFIS_TYPE_DMASETUP: { GCPhysAddrRecFis += AHCI_RECFIS_DSFIS_OFFSET; cbFis = AHCI_CMDFIS_TYPE_DMASETUP_SIZE; break; } case AHCI_CMDFIS_TYPE_PIOSETUP: { GCPhysAddrRecFis += AHCI_RECFIS_PSFIS_OFFSET; cbFis = AHCI_CMDFIS_TYPE_PIOSETUP_SIZE; break; } default: /* * We should post the unknown FIS into memory too but this never happens because * we know which FIS types we generate. ;) */ AssertMsgFailed(("%s: Unknown FIS type!\n", __FUNCTION__)); } /* Post the FIS into memory. */ ahciLog(("%s: PDMDevHlpPCIPhysWrite GCPhysAddrRecFis=%RGp cbFis=%u\n", __FUNCTION__, GCPhysAddrRecFis, cbFis)); PDMDevHlpPCIPhysWriteMeta(pDevIns, GCPhysAddrRecFis, pCmdFis, cbFis); } return rc; } DECLINLINE(void) ahciReqSetStatus(PAHCIREQ pAhciReq, uint8_t u8Error, uint8_t u8Status) { pAhciReq->cmdFis[AHCI_CMDFIS_ERR] = u8Error; pAhciReq->cmdFis[AHCI_CMDFIS_STS] = u8Status; } static void ataPadString(uint8_t *pbDst, const char *pbSrc, uint32_t cbSize) { for (uint32_t i = 0; i < cbSize; i++) { if (*pbSrc) pbDst[i ^ 1] = *pbSrc++; else pbDst[i ^ 1] = ' '; } } static uint32_t ataChecksum(void* ptr, size_t count) { uint8_t u8Sum = 0xa5, *p = (uint8_t*)ptr; size_t i; for (i = 0; i < count; i++) { u8Sum += *p++; } return (uint8_t)-(int32_t)u8Sum; } static int ahciIdentifySS(PAHCI pThis, PAHCIPORT pAhciPort, PAHCIPORTR3 pAhciPortR3, void *pvBuf) { uint16_t *p = (uint16_t *)pvBuf; memset(p, 0, 512); p[0] = RT_H2LE_U16(0x0040); p[1] = RT_H2LE_U16(RT_MIN(pAhciPort->PCHSGeometry.cCylinders, 16383)); p[3] = RT_H2LE_U16(pAhciPort->PCHSGeometry.cHeads); /* Block size; obsolete, but required for the BIOS. */ p[5] = RT_H2LE_U16(512); p[6] = RT_H2LE_U16(pAhciPort->PCHSGeometry.cSectors); ataPadString((uint8_t *)(p + 10), pAhciPort->szSerialNumber, AHCI_SERIAL_NUMBER_LENGTH); /* serial number */ p[20] = RT_H2LE_U16(3); /* XXX: retired, cache type */ p[21] = RT_H2LE_U16(512); /* XXX: retired, cache size in sectors */ p[22] = RT_H2LE_U16(0); /* ECC bytes per sector */ ataPadString((uint8_t *)(p + 23), pAhciPort->szFirmwareRevision, AHCI_FIRMWARE_REVISION_LENGTH); /* firmware version */ ataPadString((uint8_t *)(p + 27), pAhciPort->szModelNumber, AHCI_MODEL_NUMBER_LENGTH); /* model */ #if ATA_MAX_MULT_SECTORS > 1 p[47] = RT_H2LE_U16(0x8000 | ATA_MAX_MULT_SECTORS); #endif p[48] = RT_H2LE_U16(1); /* dword I/O, used by the BIOS */ p[49] = RT_H2LE_U16(1 << 11 | 1 << 9 | 1 << 8); /* DMA and LBA supported */ p[50] = RT_H2LE_U16(1 << 14); /* No drive specific standby timer minimum */ p[51] = RT_H2LE_U16(240); /* PIO transfer cycle */ p[52] = RT_H2LE_U16(240); /* DMA transfer cycle */ p[53] = RT_H2LE_U16(1 | 1 << 1 | 1 << 2); /* words 54-58,64-70,88 valid */ p[54] = RT_H2LE_U16(RT_MIN(pAhciPort->PCHSGeometry.cCylinders, 16383)); p[55] = RT_H2LE_U16(pAhciPort->PCHSGeometry.cHeads); p[56] = RT_H2LE_U16(pAhciPort->PCHSGeometry.cSectors); p[57] = RT_H2LE_U16(RT_MIN(pAhciPort->PCHSGeometry.cCylinders, 16383) * pAhciPort->PCHSGeometry.cHeads * pAhciPort->PCHSGeometry.cSectors); p[58] = RT_H2LE_U16(RT_MIN(pAhciPort->PCHSGeometry.cCylinders, 16383) * pAhciPort->PCHSGeometry.cHeads * pAhciPort->PCHSGeometry.cSectors >> 16); if (pAhciPort->cMultSectors) p[59] = RT_H2LE_U16(0x100 | pAhciPort->cMultSectors); if (pAhciPort->cTotalSectors <= (1 << 28) - 1) { p[60] = RT_H2LE_U16(pAhciPort->cTotalSectors); p[61] = RT_H2LE_U16(pAhciPort->cTotalSectors >> 16); } else { /* Report maximum number of sectors possible with LBA28 */ p[60] = RT_H2LE_U16(((1 << 28) - 1) & 0xffff); p[61] = RT_H2LE_U16(((1 << 28) - 1) >> 16); } p[63] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_MDMA, ATA_MDMA_MODE_MAX, pAhciPort->uATATransferMode)); /* MDMA modes supported / mode enabled */ p[64] = RT_H2LE_U16(ATA_PIO_MODE_MAX > 2 ? (1 << (ATA_PIO_MODE_MAX - 2)) - 1 : 0); /* PIO modes beyond PIO2 supported */ p[65] = RT_H2LE_U16(120); /* minimum DMA multiword tx cycle time */ p[66] = RT_H2LE_U16(120); /* recommended DMA multiword tx cycle time */ p[67] = RT_H2LE_U16(120); /* minimum PIO cycle time without flow control */ p[68] = RT_H2LE_U16(120); /* minimum PIO cycle time with IORDY flow control */ if ( pAhciPort->fTrimEnabled || pAhciPort->cbSector != 512 || pAhciPortR3->pDrvMedia->pfnIsNonRotational(pAhciPortR3->pDrvMedia)) { p[80] = RT_H2LE_U16(0x1f0); /* support everything up to ATA/ATAPI-8 ACS */ p[81] = RT_H2LE_U16(0x28); /* conforms to ATA/ATAPI-8 ACS */ } else { p[80] = RT_H2LE_U16(0x7e); /* support everything up to ATA/ATAPI-6 */ p[81] = RT_H2LE_U16(0x22); /* conforms to ATA/ATAPI-6 */ } p[82] = RT_H2LE_U16(1 << 3 | 1 << 5 | 1 << 6); /* supports power management, write cache and look-ahead */ p[83] = RT_H2LE_U16(1 << 14 | 1 << 10 | 1 << 12 | 1 << 13); /* supports LBA48, FLUSH CACHE and FLUSH CACHE EXT */ p[84] = RT_H2LE_U16(1 << 14); p[85] = RT_H2LE_U16(1 << 3 | 1 << 5 | 1 << 6); /* enabled power management, write cache and look-ahead */ p[86] = RT_H2LE_U16(1 << 10 | 1 << 12 | 1 << 13); /* enabled LBA48, FLUSH CACHE and FLUSH CACHE EXT */ p[87] = RT_H2LE_U16(1 << 14); p[88] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_UDMA, ATA_UDMA_MODE_MAX, pAhciPort->uATATransferMode)); /* UDMA modes supported / mode enabled */ p[93] = RT_H2LE_U16(0x00); p[100] = RT_H2LE_U16(pAhciPort->cTotalSectors); p[101] = RT_H2LE_U16(pAhciPort->cTotalSectors >> 16); p[102] = RT_H2LE_U16(pAhciPort->cTotalSectors >> 32); p[103] = RT_H2LE_U16(pAhciPort->cTotalSectors >> 48); /* valid information, more than one logical sector per physical sector, 2^cLogSectorsPerPhysicalExp logical sectors per physical sector */ if (pAhciPort->cLogSectorsPerPhysicalExp) p[106] = RT_H2LE_U16(RT_BIT(14) | RT_BIT(13) | pAhciPort->cLogSectorsPerPhysicalExp); if (pAhciPort->cbSector != 512) { uint32_t cSectorSizeInWords = pAhciPort->cbSector / sizeof(uint16_t); /* Enable reporting of logical sector size. */ p[106] |= RT_H2LE_U16(RT_BIT(12) | RT_BIT(14)); p[117] = RT_H2LE_U16(cSectorSizeInWords); p[118] = RT_H2LE_U16(cSectorSizeInWords >> 16); } if (pAhciPortR3->pDrvMedia->pfnIsNonRotational(pAhciPortR3->pDrvMedia)) p[217] = RT_H2LE_U16(1); /* Non-rotational medium */ if (pAhciPort->fTrimEnabled) /** @todo Set bit 14 in word 69 too? (Deterministic read after TRIM). */ p[169] = RT_H2LE_U16(1); /* DATA SET MANAGEMENT command supported. */ /* The following are SATA specific */ p[75] = RT_H2LE_U16(pThis->cCmdSlotsAvail - 1); /* Number of commands we support, 0's based */ p[76] = RT_H2LE_U16((1 << 8) | (1 << 2)); /* Native command queuing and Serial ATA Gen2 (3.0 Gbps) speed supported */ uint32_t uCsum = ataChecksum(p, 510); p[255] = RT_H2LE_U16(0xa5 | (uCsum << 8)); /* Integrity word */ return VINF_SUCCESS; } static int ahciR3AtapiIdentify(PPDMDEVINS pDevIns, PAHCIREQ pAhciReq, PAHCIPORT pAhciPort, size_t cbData, size_t *pcbData) { uint16_t p[256]; memset(p, 0, 512); /* Removable CDROM, 50us response, 12 byte packets */ p[0] = RT_H2LE_U16(2 << 14 | 5 << 8 | 1 << 7 | 2 << 5 | 0 << 0); ataPadString((uint8_t *)(p + 10), pAhciPort->szSerialNumber, AHCI_SERIAL_NUMBER_LENGTH); /* serial number */ p[20] = RT_H2LE_U16(3); /* XXX: retired, cache type */ p[21] = RT_H2LE_U16(512); /* XXX: retired, cache size in sectors */ ataPadString((uint8_t *)(p + 23), pAhciPort->szFirmwareRevision, AHCI_FIRMWARE_REVISION_LENGTH); /* firmware version */ ataPadString((uint8_t *)(p + 27), pAhciPort->szModelNumber, AHCI_MODEL_NUMBER_LENGTH); /* model */ p[49] = RT_H2LE_U16(1 << 11 | 1 << 9 | 1 << 8); /* DMA and LBA supported */ p[50] = RT_H2LE_U16(1 << 14); /* No drive specific standby timer minimum */ p[51] = RT_H2LE_U16(240); /* PIO transfer cycle */ p[52] = RT_H2LE_U16(240); /* DMA transfer cycle */ p[53] = RT_H2LE_U16(1 << 1 | 1 << 2); /* words 64-70,88 are valid */ p[63] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_MDMA, ATA_MDMA_MODE_MAX, pAhciPort->uATATransferMode)); /* MDMA modes supported / mode enabled */ p[64] = RT_H2LE_U16(ATA_PIO_MODE_MAX > 2 ? (1 << (ATA_PIO_MODE_MAX - 2)) - 1 : 0); /* PIO modes beyond PIO2 supported */ p[65] = RT_H2LE_U16(120); /* minimum DMA multiword tx cycle time */ p[66] = RT_H2LE_U16(120); /* recommended DMA multiword tx cycle time */ p[67] = RT_H2LE_U16(120); /* minimum PIO cycle time without flow control */ p[68] = RT_H2LE_U16(120); /* minimum PIO cycle time with IORDY flow control */ p[73] = RT_H2LE_U16(0x003e); /* ATAPI CDROM major */ p[74] = RT_H2LE_U16(9); /* ATAPI CDROM minor */ p[80] = RT_H2LE_U16(0x7e); /* support everything up to ATA/ATAPI-6 */ p[81] = RT_H2LE_U16(0x22); /* conforms to ATA/ATAPI-6 */ p[82] = RT_H2LE_U16(1 << 4 | 1 << 9); /* supports packet command set and DEVICE RESET */ p[83] = RT_H2LE_U16(1 << 14); p[84] = RT_H2LE_U16(1 << 14); p[85] = RT_H2LE_U16(1 << 4 | 1 << 9); /* enabled packet command set and DEVICE RESET */ p[86] = RT_H2LE_U16(0); p[87] = RT_H2LE_U16(1 << 14); p[88] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_UDMA, ATA_UDMA_MODE_MAX, pAhciPort->uATATransferMode)); /* UDMA modes supported / mode enabled */ p[93] = RT_H2LE_U16((1 | 1 << 1) << ((pAhciPort->iLUN & 1) == 0 ? 0 : 8) | 1 << 13 | 1 << 14); /* The following are SATA specific */ p[75] = RT_H2LE_U16(31); /* We support 32 commands */ p[76] = RT_H2LE_U16((1 << 8) | (1 << 2)); /* Native command queuing and Serial ATA Gen2 (3.0 Gbps) speed supported */ /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciR3CopyBufferToPrdtl(pDevIns, pAhciReq, (void *)&p[0], RT_MIN(cbData, sizeof(p)), 0 /* cbSkip */); return VINF_SUCCESS; } /** * Reset all values after a reset of the attached storage device. * * @returns nothing * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pAhciPort The port the device is attached to, shared bits(shared * bits). * @param pAhciReq The state to get the tag number from. */ static void ahciFinishStorageDeviceReset(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, PAHCIREQ pAhciReq) { int rc; /* Send a status good D2H FIS. */ pAhciPort->fResetDevice = false; if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) ahciPostFirstD2HFisIntoMemory(pDevIns, pAhciPort); /* As this is the first D2H FIS after the reset update the signature in the SIG register of the port. */ if (pAhciPort->fATAPI) pAhciPort->regSIG = AHCI_PORT_SIG_ATAPI; else pAhciPort->regSIG = AHCI_PORT_SIG_DISK; ASMAtomicOrU32(&pAhciPort->u32TasksFinished, (1 << pAhciReq->uTag)); rc = ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VERR_IGNORED); AssertRC(rc); } /** * Initiates a device reset caused by ATA_DEVICE_RESET (ATAPI only). * * @returns nothing. * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pAhciPort The device to reset(shared bits). * @param pAhciReq The task state. */ static void ahciDeviceReset(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, PAHCIREQ pAhciReq) { ASMAtomicWriteBool(&pAhciPort->fResetDevice, true); /* * Because this ATAPI only and ATAPI can't have * more than one command active at a time the task counter should be 0 * and it is possible to finish the reset now. */ Assert(ASMAtomicReadU32(&pAhciPort->cTasksActive) == 0); ahciFinishStorageDeviceReset(pDevIns, pThis, pAhciPort, pAhciReq); } /** * Create a PIO setup FIS and post it into the memory area of the guest. * * @returns nothing. * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pAhciPort The port of the SATA controller (shared bits). * @param cbTransfer Transfer size of the request. * @param pCmdFis Pointer to the command FIS from the guest. * @param fRead Flag whether this is a read request. * @param fInterrupt If an interrupt should be send to the guest. */ static void ahciSendPioSetupFis(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, size_t cbTransfer, uint8_t *pCmdFis, bool fRead, bool fInterrupt) { uint8_t abPioSetupFis[20]; bool fAssertIntr = false; ahciLog(("%s: building PIO setup Fis\n", __FUNCTION__)); AssertMsg( cbTransfer > 0 && cbTransfer <= 65534, ("Can't send PIO setup FIS for requests with 0 bytes to transfer or greater than 65534\n")); if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) { memset(&abPioSetupFis[0], 0, sizeof(abPioSetupFis)); abPioSetupFis[AHCI_CMDFIS_TYPE] = AHCI_CMDFIS_TYPE_PIOSETUP; abPioSetupFis[AHCI_CMDFIS_BITS] = (fInterrupt ? AHCI_CMDFIS_I : 0); if (fRead) abPioSetupFis[AHCI_CMDFIS_BITS] |= AHCI_CMDFIS_D; abPioSetupFis[AHCI_CMDFIS_STS] = pCmdFis[AHCI_CMDFIS_STS]; abPioSetupFis[AHCI_CMDFIS_ERR] = pCmdFis[AHCI_CMDFIS_ERR]; abPioSetupFis[AHCI_CMDFIS_SECTN] = pCmdFis[AHCI_CMDFIS_SECTN]; abPioSetupFis[AHCI_CMDFIS_CYLL] = pCmdFis[AHCI_CMDFIS_CYLL]; abPioSetupFis[AHCI_CMDFIS_CYLH] = pCmdFis[AHCI_CMDFIS_CYLH]; abPioSetupFis[AHCI_CMDFIS_HEAD] = pCmdFis[AHCI_CMDFIS_HEAD]; abPioSetupFis[AHCI_CMDFIS_SECTNEXP] = pCmdFis[AHCI_CMDFIS_SECTNEXP]; abPioSetupFis[AHCI_CMDFIS_CYLLEXP] = pCmdFis[AHCI_CMDFIS_CYLLEXP]; abPioSetupFis[AHCI_CMDFIS_CYLHEXP] = pCmdFis[AHCI_CMDFIS_CYLHEXP]; abPioSetupFis[AHCI_CMDFIS_SECTC] = pCmdFis[AHCI_CMDFIS_SECTC]; abPioSetupFis[AHCI_CMDFIS_SECTCEXP] = pCmdFis[AHCI_CMDFIS_SECTCEXP]; /* Set transfer count. */ abPioSetupFis[16] = (cbTransfer >> 8) & 0xff; abPioSetupFis[17] = cbTransfer & 0xff; /* Update registers. */ pAhciPort->regTFD = (pCmdFis[AHCI_CMDFIS_ERR] << 8) | pCmdFis[AHCI_CMDFIS_STS]; ahciPostFisIntoMemory(pDevIns, pAhciPort, AHCI_CMDFIS_TYPE_PIOSETUP, abPioSetupFis); if (fInterrupt) { ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_PSS); /* Check if we should assert an interrupt */ if (pAhciPort->regIE & AHCI_PORT_IE_PSE) fAssertIntr = true; } if (fAssertIntr) { int rc = ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VERR_IGNORED); AssertRC(rc); } } } /** * Build a D2H FIS and post into the memory area of the guest. * * @returns Nothing * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pAhciPort The port of the SATA controller (shared bits). * @param uTag The tag of the request. * @param pCmdFis Pointer to the command FIS from the guest. * @param fInterrupt If an interrupt should be send to the guest. */ static void ahciSendD2HFis(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, uint32_t uTag, uint8_t *pCmdFis, bool fInterrupt) { uint8_t d2hFis[20]; bool fAssertIntr = false; ahciLog(("%s: building D2H Fis\n", __FUNCTION__)); if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) { memset(&d2hFis[0], 0, sizeof(d2hFis)); d2hFis[AHCI_CMDFIS_TYPE] = AHCI_CMDFIS_TYPE_D2H; d2hFis[AHCI_CMDFIS_BITS] = (fInterrupt ? AHCI_CMDFIS_I : 0); d2hFis[AHCI_CMDFIS_STS] = pCmdFis[AHCI_CMDFIS_STS]; d2hFis[AHCI_CMDFIS_ERR] = pCmdFis[AHCI_CMDFIS_ERR]; d2hFis[AHCI_CMDFIS_SECTN] = pCmdFis[AHCI_CMDFIS_SECTN]; d2hFis[AHCI_CMDFIS_CYLL] = pCmdFis[AHCI_CMDFIS_CYLL]; d2hFis[AHCI_CMDFIS_CYLH] = pCmdFis[AHCI_CMDFIS_CYLH]; d2hFis[AHCI_CMDFIS_HEAD] = pCmdFis[AHCI_CMDFIS_HEAD]; d2hFis[AHCI_CMDFIS_SECTNEXP] = pCmdFis[AHCI_CMDFIS_SECTNEXP]; d2hFis[AHCI_CMDFIS_CYLLEXP] = pCmdFis[AHCI_CMDFIS_CYLLEXP]; d2hFis[AHCI_CMDFIS_CYLHEXP] = pCmdFis[AHCI_CMDFIS_CYLHEXP]; d2hFis[AHCI_CMDFIS_SECTC] = pCmdFis[AHCI_CMDFIS_SECTC]; d2hFis[AHCI_CMDFIS_SECTCEXP] = pCmdFis[AHCI_CMDFIS_SECTCEXP]; /* Update registers. */ pAhciPort->regTFD = (pCmdFis[AHCI_CMDFIS_ERR] << 8) | pCmdFis[AHCI_CMDFIS_STS]; ahciPostFisIntoMemory(pDevIns, pAhciPort, AHCI_CMDFIS_TYPE_D2H, d2hFis); if (pCmdFis[AHCI_CMDFIS_STS] & ATA_STAT_ERR) { /* Error bit is set. */ ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_TFES); if (pAhciPort->regIE & AHCI_PORT_IE_TFEE) fAssertIntr = true; /* * Don't mark the command slot as completed because the guest * needs it to identify the failed command. */ } else if (fInterrupt) { ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_DHRS); /* Check if we should assert an interrupt */ if (pAhciPort->regIE & AHCI_PORT_IE_DHRE) fAssertIntr = true; /* Mark command as completed. */ ASMAtomicOrU32(&pAhciPort->u32TasksFinished, RT_BIT_32(uTag)); } if (fAssertIntr) { int rc = ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VERR_IGNORED); AssertRC(rc); } } } /** * Build a SDB Fis and post it into the memory area of the guest. * * @returns Nothing * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pAhciPort The port for which the SDB Fis is send, shared bits. * @param pAhciPortR3 The port for which the SDB Fis is send, ring-3 bits. * @param uFinishedTasks Bitmask of finished tasks. * @param fInterrupt If an interrupt should be asserted. */ static void ahciSendSDBFis(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, PAHCIPORTR3 pAhciPortR3, uint32_t uFinishedTasks, bool fInterrupt) { uint32_t sdbFis[2]; bool fAssertIntr = false; PAHCIREQ pTaskErr = ASMAtomicReadPtrT(&pAhciPortR3->pTaskErr, PAHCIREQ); ahciLog(("%s: Building SDB FIS\n", __FUNCTION__)); if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) { memset(&sdbFis[0], 0, sizeof(sdbFis)); sdbFis[0] = AHCI_CMDFIS_TYPE_SETDEVBITS; sdbFis[0] |= (fInterrupt ? (1 << 14) : 0); if (RT_UNLIKELY(pTaskErr)) { sdbFis[0] = pTaskErr->cmdFis[AHCI_CMDFIS_ERR]; sdbFis[0] |= (pTaskErr->cmdFis[AHCI_CMDFIS_STS] & 0x77) << 16; /* Some bits are marked as reserved and thus are masked out. */ /* Update registers. */ pAhciPort->regTFD = (pTaskErr->cmdFis[AHCI_CMDFIS_ERR] << 8) | pTaskErr->cmdFis[AHCI_CMDFIS_STS]; } else { sdbFis[0] = 0; sdbFis[0] |= (ATA_STAT_READY | ATA_STAT_SEEK) << 16; pAhciPort->regTFD = ATA_STAT_READY | ATA_STAT_SEEK; } sdbFis[1] = pAhciPort->u32QueuedTasksFinished | uFinishedTasks; ahciPostFisIntoMemory(pDevIns, pAhciPort, AHCI_CMDFIS_TYPE_SETDEVBITS, (uint8_t *)sdbFis); if (RT_UNLIKELY(pTaskErr)) { /* Error bit is set. */ ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_TFES); if (pAhciPort->regIE & AHCI_PORT_IE_TFEE) fAssertIntr = true; } if (fInterrupt) { ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_SDBS); /* Check if we should assert an interrupt */ if (pAhciPort->regIE & AHCI_PORT_IE_SDBE) fAssertIntr = true; } ASMAtomicOrU32(&pAhciPort->u32QueuedTasksFinished, uFinishedTasks); if (fAssertIntr) { int rc = ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VERR_IGNORED); AssertRC(rc); } } } static uint32_t ahciGetNSectors(uint8_t *pCmdFis, bool fLBA48) { /* 0 means either 256 (LBA28) or 65536 (LBA48) sectors. */ if (fLBA48) { if (!pCmdFis[AHCI_CMDFIS_SECTC] && !pCmdFis[AHCI_CMDFIS_SECTCEXP]) return 65536; else return pCmdFis[AHCI_CMDFIS_SECTCEXP] << 8 | pCmdFis[AHCI_CMDFIS_SECTC]; } else { if (!pCmdFis[AHCI_CMDFIS_SECTC]) return 256; else return pCmdFis[AHCI_CMDFIS_SECTC]; } } static uint64_t ahciGetSector(PAHCIPORT pAhciPort, uint8_t *pCmdFis, bool fLBA48) { uint64_t iLBA; if (pCmdFis[AHCI_CMDFIS_HEAD] & 0x40) { /* any LBA variant */ if (fLBA48) { /* LBA48 */ iLBA = ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLHEXP] << 40) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLLEXP] << 32) | ((uint64_t)pCmdFis[AHCI_CMDFIS_SECTNEXP] << 24) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLH] << 16) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLL] << 8) | pCmdFis[AHCI_CMDFIS_SECTN]; } else { /* LBA */ iLBA = ((pCmdFis[AHCI_CMDFIS_HEAD] & 0x0f) << 24) | (pCmdFis[AHCI_CMDFIS_CYLH] << 16) | (pCmdFis[AHCI_CMDFIS_CYLL] << 8) | pCmdFis[AHCI_CMDFIS_SECTN]; } } else { /* CHS */ iLBA = ((pCmdFis[AHCI_CMDFIS_CYLH] << 8) | pCmdFis[AHCI_CMDFIS_CYLL]) * pAhciPort->PCHSGeometry.cHeads * pAhciPort->PCHSGeometry.cSectors + (pCmdFis[AHCI_CMDFIS_HEAD] & 0x0f) * pAhciPort->PCHSGeometry.cSectors + (pCmdFis[AHCI_CMDFIS_SECTN] - 1); } return iLBA; } static uint64_t ahciGetSectorQueued(uint8_t *pCmdFis) { uint64_t uLBA; uLBA = ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLHEXP] << 40) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLLEXP] << 32) | ((uint64_t)pCmdFis[AHCI_CMDFIS_SECTNEXP] << 24) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLH] << 16) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLL] << 8) | pCmdFis[AHCI_CMDFIS_SECTN]; return uLBA; } DECLINLINE(uint32_t) ahciGetNSectorsQueued(uint8_t *pCmdFis) { if (!pCmdFis[AHCI_CMDFIS_FETEXP] && !pCmdFis[AHCI_CMDFIS_FET]) return 65536; else return pCmdFis[AHCI_CMDFIS_FETEXP] << 8 | pCmdFis[AHCI_CMDFIS_FET]; } /** * Copy from guest to host memory worker. * * @copydoc FNAHCIR3MEMCOPYCALLBACK */ static DECLCALLBACK(void) ahciR3CopyBufferFromGuestWorker(PPDMDEVINS pDevIns, RTGCPHYS GCPhys, PRTSGBUF pSgBuf, size_t cbCopy, size_t *pcbSkip) { size_t cbSkipped = RT_MIN(cbCopy, *pcbSkip); cbCopy -= cbSkipped; GCPhys += cbSkipped; *pcbSkip -= cbSkipped; while (cbCopy) { size_t cbSeg = cbCopy; void *pvSeg = RTSgBufGetNextSegment(pSgBuf, &cbSeg); AssertPtr(pvSeg); Log5Func(("%RGp LB %#zx\n", GCPhys, cbSeg)); PDMDevHlpPCIPhysRead(pDevIns, GCPhys, pvSeg, cbSeg); Log7Func(("%.*Rhxd\n", cbSeg, pvSeg)); GCPhys += cbSeg; cbCopy -= cbSeg; } } /** * Copy from host to guest memory worker. * * @copydoc FNAHCIR3MEMCOPYCALLBACK */ static DECLCALLBACK(void) ahciR3CopyBufferToGuestWorker(PPDMDEVINS pDevIns, RTGCPHYS GCPhys, PRTSGBUF pSgBuf, size_t cbCopy, size_t *pcbSkip) { size_t cbSkipped = RT_MIN(cbCopy, *pcbSkip); cbCopy -= cbSkipped; GCPhys += cbSkipped; *pcbSkip -= cbSkipped; while (cbCopy) { size_t cbSeg = cbCopy; void *pvSeg = RTSgBufGetNextSegment(pSgBuf, &cbSeg); AssertPtr(pvSeg); Log5Func(("%RGp LB %#zx\n", GCPhys, cbSeg)); Log6Func(("%.*Rhxd\n", cbSeg, pvSeg)); PDMDevHlpPCIPhysWriteUser(pDevIns, GCPhys, pvSeg, cbSeg); GCPhys += cbSeg; cbCopy -= cbSeg; } } /** * Walks the PRDTL list copying data between the guest and host memory buffers. * * @returns Amount of bytes copied. * @param pDevIns The device instance. * @param pAhciReq AHCI request structure. * @param pfnCopyWorker The copy method to apply for each guest buffer. * @param pSgBuf The host S/G buffer. * @param cbSkip How many bytes to skip in advance before starting to copy. * @param cbCopy How many bytes to copy. */ static size_t ahciR3PrdtlWalk(PPDMDEVINS pDevIns, PAHCIREQ pAhciReq, PFNAHCIR3MEMCOPYCALLBACK pfnCopyWorker, PRTSGBUF pSgBuf, size_t cbSkip, size_t cbCopy) { RTGCPHYS GCPhysPrdtl = pAhciReq->GCPhysPrdtl; unsigned cPrdtlEntries = pAhciReq->cPrdtlEntries; size_t cbCopied = 0; /* * Add the amount to skip to the host buffer size to avoid a * few conditionals later on. */ cbCopy += cbSkip; AssertMsgReturn(cPrdtlEntries > 0, ("Copying 0 bytes is not possible\n"), 0); do { SGLEntry aPrdtlEntries[32]; uint32_t cPrdtlEntriesRead = cPrdtlEntries < RT_ELEMENTS(aPrdtlEntries) ? cPrdtlEntries : RT_ELEMENTS(aPrdtlEntries); PDMDevHlpPCIPhysReadMeta(pDevIns, GCPhysPrdtl, &aPrdtlEntries[0], cPrdtlEntriesRead * sizeof(SGLEntry)); for (uint32_t i = 0; (i < cPrdtlEntriesRead) && cbCopy; i++) { RTGCPHYS GCPhysAddrDataBase = AHCI_RTGCPHYS_FROM_U32(aPrdtlEntries[i].u32DBAUp, aPrdtlEntries[i].u32DBA); uint32_t cbThisCopy = (aPrdtlEntries[i].u32DescInf & SGLENTRY_DESCINF_DBC) + 1; cbThisCopy = (uint32_t)RT_MIN(cbThisCopy, cbCopy); /* Copy into SG entry. */ pfnCopyWorker(pDevIns, GCPhysAddrDataBase, pSgBuf, cbThisCopy, &cbSkip); cbCopy -= cbThisCopy; cbCopied += cbThisCopy; } GCPhysPrdtl += cPrdtlEntriesRead * sizeof(SGLEntry); cPrdtlEntries -= cPrdtlEntriesRead; } while (cPrdtlEntries && cbCopy); if (cbCopied < cbCopy) pAhciReq->fFlags |= AHCI_REQ_OVERFLOW; return cbCopied; } /** * Copies a data buffer into the S/G buffer set up by the guest. * * @returns Amount of bytes copied to the PRDTL. * @param pDevIns The device instance. * @param pAhciReq AHCI request structure. * @param pSgBuf The S/G buffer to copy from. * @param cbSkip How many bytes to skip in advance before starting to copy. * @param cbCopy How many bytes to copy. */ static size_t ahciR3CopySgBufToPrdtl(PPDMDEVINS pDevIns, PAHCIREQ pAhciReq, PRTSGBUF pSgBuf, size_t cbSkip, size_t cbCopy) { return ahciR3PrdtlWalk(pDevIns, pAhciReq, ahciR3CopyBufferToGuestWorker, pSgBuf, cbSkip, cbCopy); } /** * Copies the S/G buffer into a data buffer. * * @returns Amount of bytes copied from the PRDTL. * @param pDevIns The device instance. * @param pAhciReq AHCI request structure. * @param pSgBuf The S/G buffer to copy into. * @param cbSkip How many bytes to skip in advance before starting to copy. * @param cbCopy How many bytes to copy. */ static size_t ahciR3CopySgBufFromPrdtl(PPDMDEVINS pDevIns, PAHCIREQ pAhciReq, PRTSGBUF pSgBuf, size_t cbSkip, size_t cbCopy) { return ahciR3PrdtlWalk(pDevIns, pAhciReq, ahciR3CopyBufferFromGuestWorker, pSgBuf, cbSkip, cbCopy); } /** * Copy a simple memory buffer to the guest memory buffer. * * @returns Amount of bytes copied from the PRDTL. * @param pDevIns The device instance. * @param pAhciReq AHCI request structure. * @param pvSrc The buffer to copy from. * @param cbSrc How many bytes to copy. * @param cbSkip How many bytes to skip initially. */ static size_t ahciR3CopyBufferToPrdtl(PPDMDEVINS pDevIns, PAHCIREQ pAhciReq, const void *pvSrc, size_t cbSrc, size_t cbSkip) { RTSGSEG Seg; RTSGBUF SgBuf; Seg.pvSeg = (void *)pvSrc; Seg.cbSeg = cbSrc; RTSgBufInit(&SgBuf, &Seg, 1); return ahciR3CopySgBufToPrdtl(pDevIns, pAhciReq, &SgBuf, cbSkip, cbSrc); } /** * Calculates the size of the guest buffer described by the PRDT. * * @returns VBox status code. * @param pDevIns The device instance. * @param pAhciReq AHCI request structure. * @param pcbPrdt Where to store the size of the guest buffer. */ static int ahciR3PrdtQuerySize(PPDMDEVINS pDevIns, PAHCIREQ pAhciReq, size_t *pcbPrdt) { RTGCPHYS GCPhysPrdtl = pAhciReq->GCPhysPrdtl; unsigned cPrdtlEntries = pAhciReq->cPrdtlEntries; size_t cbPrdt = 0; do { SGLEntry aPrdtlEntries[32]; uint32_t const cPrdtlEntriesRead = RT_MIN(cPrdtlEntries, RT_ELEMENTS(aPrdtlEntries)); PDMDevHlpPCIPhysReadMeta(pDevIns, GCPhysPrdtl, &aPrdtlEntries[0], cPrdtlEntriesRead * sizeof(SGLEntry)); for (uint32_t i = 0; i < cPrdtlEntriesRead; i++) cbPrdt += (aPrdtlEntries[i].u32DescInf & SGLENTRY_DESCINF_DBC) + 1; GCPhysPrdtl += cPrdtlEntriesRead * sizeof(SGLEntry); cPrdtlEntries -= cPrdtlEntriesRead; } while (cPrdtlEntries); *pcbPrdt = cbPrdt; return VINF_SUCCESS; } /** * Cancels all active tasks on the port. * * @returns Whether all active tasks were canceled. * @param pAhciPortR3 The AHCI port, ring-3 bits. */ static bool ahciR3CancelActiveTasks(PAHCIPORTR3 pAhciPortR3) { if (pAhciPortR3->pDrvMediaEx) { int rc = pAhciPortR3->pDrvMediaEx->pfnIoReqCancelAll(pAhciPortR3->pDrvMediaEx); AssertRC(rc); } return true; /* always true for now because tasks don't use guest memory as the buffer which makes canceling a task impossible. */ } /** * Creates the array of ranges to trim. * * @returns VBox status code. * @param pDevIns The device instance. * @param pAhciPort AHCI port state, shared bits. * @param pAhciReq The request handling the TRIM request. * @param idxRangeStart Index of the first range to start copying. * @param paRanges Where to store the ranges. * @param cRanges Number of ranges fitting into the array. * @param pcRanges Where to store the amount of ranges actually copied on success. */ static int ahciTrimRangesCreate(PPDMDEVINS pDevIns, PAHCIPORT pAhciPort, PAHCIREQ pAhciReq, uint32_t idxRangeStart, PRTRANGE paRanges, uint32_t cRanges, uint32_t *pcRanges) { SGLEntry aPrdtlEntries[32]; uint64_t aRanges[64]; uint32_t cPrdtlEntries = pAhciReq->cPrdtlEntries; RTGCPHYS GCPhysPrdtl = pAhciReq->GCPhysPrdtl; int rc = VERR_PDM_MEDIAEX_IOBUF_OVERFLOW; uint32_t idxRange = 0; LogFlowFunc(("pAhciPort=%#p pAhciReq=%#p\n", pAhciPort, pAhciReq)); AssertMsgReturn(pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_DISCARD, ("This is not a trim request\n"), VERR_INVALID_PARAMETER); if (!cPrdtlEntries) pAhciReq->fFlags |= AHCI_REQ_OVERFLOW; /* Convert the ranges from ATA to our format. */ while ( cPrdtlEntries && idxRange < cRanges) { uint32_t cPrdtlEntriesRead = RT_MIN(cPrdtlEntries, RT_ELEMENTS(aPrdtlEntries)); rc = VINF_SUCCESS; PDMDevHlpPCIPhysReadMeta(pDevIns, GCPhysPrdtl, &aPrdtlEntries[0], cPrdtlEntriesRead * sizeof(SGLEntry)); for (uint32_t i = 0; i < cPrdtlEntriesRead && idxRange < cRanges; i++) { RTGCPHYS GCPhysAddrDataBase = AHCI_RTGCPHYS_FROM_U32(aPrdtlEntries[i].u32DBAUp, aPrdtlEntries[i].u32DBA); uint32_t cbThisCopy = (aPrdtlEntries[i].u32DescInf & SGLENTRY_DESCINF_DBC) + 1; cbThisCopy = RT_MIN(cbThisCopy, sizeof(aRanges)); /* Copy into buffer. */ PDMDevHlpPCIPhysReadMeta(pDevIns, GCPhysAddrDataBase, aRanges, cbThisCopy); for (unsigned idxRangeSrc = 0; idxRangeSrc < RT_ELEMENTS(aRanges) && idxRange < cRanges; idxRangeSrc++) { /* Skip range if told to do so. */ if (!idxRangeStart) { aRanges[idxRangeSrc] = RT_H2LE_U64(aRanges[idxRangeSrc]); if (AHCI_RANGE_LENGTH_GET(aRanges[idxRangeSrc]) != 0) { paRanges[idxRange].offStart = (aRanges[idxRangeSrc] & AHCI_RANGE_LBA_MASK) * pAhciPort->cbSector; paRanges[idxRange].cbRange = AHCI_RANGE_LENGTH_GET(aRanges[idxRangeSrc]) * pAhciPort->cbSector; idxRange++; } else break; } else idxRangeStart--; } } GCPhysPrdtl += cPrdtlEntriesRead * sizeof(SGLEntry); cPrdtlEntries -= cPrdtlEntriesRead; } *pcRanges = idxRange; LogFlowFunc(("returns rc=%Rrc\n", rc)); return rc; } /** * Allocates a new AHCI request. * * @returns A new AHCI request structure or NULL if out of memory. * @param pAhciPortR3 The AHCI port, ring-3 bits. * @param uTag The tag to assign. */ static PAHCIREQ ahciR3ReqAlloc(PAHCIPORTR3 pAhciPortR3, uint32_t uTag) { PAHCIREQ pAhciReq = NULL; PDMMEDIAEXIOREQ hIoReq = NULL; int rc = pAhciPortR3->pDrvMediaEx->pfnIoReqAlloc(pAhciPortR3->pDrvMediaEx, &hIoReq, (void **)&pAhciReq, uTag, PDMIMEDIAEX_F_SUSPEND_ON_RECOVERABLE_ERR); if (RT_SUCCESS(rc)) { pAhciReq->hIoReq = hIoReq; pAhciReq->fMapped = false; } else pAhciReq = NULL; return pAhciReq; } /** * Frees a given AHCI request structure. * * @returns nothing. * @param pAhciPortR3 The AHCI port, ring-3 bits. * @param pAhciReq The request to free. */ static void ahciR3ReqFree(PAHCIPORTR3 pAhciPortR3, PAHCIREQ pAhciReq) { if ( pAhciReq && !(pAhciReq->fFlags & AHCI_REQ_IS_ON_STACK)) { int rc = pAhciPortR3->pDrvMediaEx->pfnIoReqFree(pAhciPortR3->pDrvMediaEx, pAhciReq->hIoReq); AssertRC(rc); } } /** * Complete a data transfer task by freeing all occupied resources * and notifying the guest. * * @returns Flag whether the given request was canceled inbetween; * * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pThisCC The ring-3 AHCI state. * @param pAhciPort Pointer to the port where to request completed, shared bits. * @param pAhciPortR3 Pointer to the port where to request completed, ring-3 bits. * @param pAhciReq Pointer to the task which finished. * @param rcReq IPRT status code of the completed request. */ static bool ahciR3TransferComplete(PPDMDEVINS pDevIns, PAHCI pThis, PAHCICC pThisCC, PAHCIPORT pAhciPort, PAHCIPORTR3 pAhciPortR3, PAHCIREQ pAhciReq, int rcReq) { bool fCanceled = false; LogFlowFunc(("pAhciPort=%p pAhciReq=%p rcReq=%d\n", pAhciPort, pAhciReq, rcReq)); VBOXDD_AHCI_REQ_COMPLETED(pAhciReq, rcReq, pAhciReq->uOffset, pAhciReq->cbTransfer); if (pAhciReq->fMapped) PDMDevHlpPhysReleasePageMappingLock(pDevIns, &pAhciReq->PgLck); if (rcReq != VERR_PDM_MEDIAEX_IOREQ_CANCELED) { if (pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_READ) pAhciPort->Led.Actual.s.fReading = 0; else if (pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_WRITE) pAhciPort->Led.Actual.s.fWriting = 0; else if (pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_DISCARD) pAhciPort->Led.Actual.s.fWriting = 0; else if (pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_SCSI) { pAhciPort->Led.Actual.s.fWriting = 0; pAhciPort->Led.Actual.s.fReading = 0; } if (RT_FAILURE(rcReq)) { /* Log the error. */ if (pAhciPort->cErrors++ < MAX_LOG_REL_ERRORS) { if (pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_FLUSH) LogRel(("AHCI#%uP%u: Flush returned rc=%Rrc\n", pDevIns->iInstance, pAhciPort->iLUN, rcReq)); else if (pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_DISCARD) LogRel(("AHCI#%uP%u: Trim returned rc=%Rrc\n", pDevIns->iInstance, pAhciPort->iLUN, rcReq)); else LogRel(("AHCI#%uP%u: %s at offset %llu (%zu bytes left) returned rc=%Rrc\n", pDevIns->iInstance, pAhciPort->iLUN, pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_READ ? "Read" : "Write", pAhciReq->uOffset, pAhciReq->cbTransfer, rcReq)); } ahciReqSetStatus(pAhciReq, ID_ERR, ATA_STAT_READY | ATA_STAT_ERR); /* * We have to duplicate the request here as the underlying I/O * request will be freed later. */ PAHCIREQ pReqDup = (PAHCIREQ)RTMemDup(pAhciReq, sizeof(AHCIREQ)); if ( pReqDup && !ASMAtomicCmpXchgPtr(&pAhciPortR3->pTaskErr, pReqDup, NULL)) RTMemFree(pReqDup); } else { /* Status will be set already for non I/O requests. */ if (pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_SCSI) { if (pAhciReq->u8ScsiSts == SCSI_STATUS_OK) { ahciReqSetStatus(pAhciReq, 0, ATA_STAT_READY | ATA_STAT_SEEK); pAhciReq->cmdFis[AHCI_CMDFIS_SECTN] = (pAhciReq->cmdFis[AHCI_CMDFIS_SECTN] & ~7) | ((pAhciReq->fFlags & AHCI_REQ_XFER_2_HOST) ? ATAPI_INT_REASON_IO : 0) | (!pAhciReq->cbTransfer ? ATAPI_INT_REASON_CD : 0); } else { ahciReqSetStatus(pAhciReq, pAhciPort->abATAPISense[2] << 4, ATA_STAT_READY | ATA_STAT_ERR); pAhciReq->cmdFis[AHCI_CMDFIS_SECTN] = (pAhciReq->cmdFis[AHCI_CMDFIS_SECTN] & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; pAhciReq->cbTransfer = 0; LogFlowFunc(("SCSI request completed with %u status\n", pAhciReq->u8ScsiSts)); } } else if (pAhciReq->enmType != PDMMEDIAEXIOREQTYPE_INVALID) ahciReqSetStatus(pAhciReq, 0, ATA_STAT_READY | ATA_STAT_SEEK); /* Write updated command header into memory of the guest. */ uint32_t u32PRDBC = 0; if (pAhciReq->enmType != PDMMEDIAEXIOREQTYPE_INVALID) { size_t cbXfer = 0; int rc = pAhciPortR3->pDrvMediaEx->pfnIoReqQueryXferSize(pAhciPortR3->pDrvMediaEx, pAhciReq->hIoReq, &cbXfer); AssertRC(rc); u32PRDBC = (uint32_t)RT_MIN(cbXfer, pAhciReq->cbTransfer); } else u32PRDBC = (uint32_t)pAhciReq->cbTransfer; PDMDevHlpPCIPhysWriteMeta(pDevIns, pAhciReq->GCPhysCmdHdrAddr + RT_UOFFSETOF(CmdHdr, u32PRDBC), &u32PRDBC, sizeof(u32PRDBC)); if (pAhciReq->fFlags & AHCI_REQ_OVERFLOW) { /* * The guest tried to transfer more data than there is space in the buffer. * Terminate task and set the overflow bit. */ /* Notify the guest. */ ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_OFS); if (pAhciPort->regIE & AHCI_PORT_IE_OFE) ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VERR_IGNORED); } } /* * Make a copy of the required data now and free the request. Otherwise the guest * might issue a new request with the same tag and we run into a conflict when allocating * a new request with the same tag later on. */ uint32_t fFlags = pAhciReq->fFlags; uint32_t uTag = pAhciReq->uTag; size_t cbTransfer = pAhciReq->cbTransfer; bool fRead = pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_READ; uint8_t cmdFis[AHCI_CMDFIS_TYPE_H2D_SIZE]; memcpy(&cmdFis[0], &pAhciReq->cmdFis[0], sizeof(cmdFis)); ahciR3ReqFree(pAhciPortR3, pAhciReq); /* Post a PIO setup FIS first if this is a PIO command which transfers data. */ if (fFlags & AHCI_REQ_PIO_DATA) ahciSendPioSetupFis(pDevIns, pThis, pAhciPort, cbTransfer, &cmdFis[0], fRead, false /* fInterrupt */); if (fFlags & AHCI_REQ_CLEAR_SACT) { if (RT_SUCCESS(rcReq) && !ASMAtomicReadPtrT(&pAhciPortR3->pTaskErr, PAHCIREQ)) ASMAtomicOrU32(&pAhciPort->u32QueuedTasksFinished, RT_BIT_32(uTag)); } if (fFlags & AHCI_REQ_IS_QUEUED) { /* * Always raise an interrupt after task completion; delaying * this (interrupt coalescing) increases latency and has a significant * impact on performance (see @bugref{5071}) */ ahciSendSDBFis(pDevIns, pThis, pAhciPort, pAhciPortR3, 0, true); } else ahciSendD2HFis(pDevIns, pThis, pAhciPort, uTag, &cmdFis[0], true); } else { /* * Task was canceled, do the cleanup but DO NOT access the guest memory! * The guest might use it for other things now because it doesn't know about that task anymore. */ fCanceled = true; /* Leave a log message about the canceled request. */ if (pAhciPort->cErrors++ < MAX_LOG_REL_ERRORS) { if (pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_FLUSH) LogRel(("AHCI#%uP%u: Canceled flush returned rc=%Rrc\n", pDevIns->iInstance, pAhciPort->iLUN, rcReq)); else if (pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_DISCARD) LogRel(("AHCI#%uP%u: Canceled trim returned rc=%Rrc\n", pDevIns->iInstance,pAhciPort->iLUN, rcReq)); else LogRel(("AHCI#%uP%u: Canceled %s at offset %llu (%zu bytes left) returned rc=%Rrc\n", pDevIns->iInstance, pAhciPort->iLUN, pAhciReq->enmType == PDMMEDIAEXIOREQTYPE_READ ? "read" : "write", pAhciReq->uOffset, pAhciReq->cbTransfer, rcReq)); } ahciR3ReqFree(pAhciPortR3, pAhciReq); } /* * Decrement the active task counter as the last step or we might run into a * hang during power off otherwise (see @bugref{7859}). * Before it could happen that we signal PDM that we are done while we still have to * copy the data to the guest but EMT might be busy destroying the driver chains * below us while we have to delegate copying data to EMT instead of doing it * on this thread. */ ASMAtomicDecU32(&pAhciPort->cTasksActive); if (pAhciPort->cTasksActive == 0 && pThisCC->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pDevIns); return fCanceled; } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqCopyFromBuf} */ static DECLCALLBACK(int) ahciR3IoReqCopyFromBuf(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, uint32_t offDst, PRTSGBUF pSgBuf, size_t cbCopy) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IMediaExPort); int rc = VINF_SUCCESS; PAHCIREQ pIoReq = (PAHCIREQ)pvIoReqAlloc; RT_NOREF(hIoReq); ahciR3CopySgBufToPrdtl(pAhciPortR3->pDevIns, pIoReq, pSgBuf, offDst, cbCopy); if (pIoReq->fFlags & AHCI_REQ_OVERFLOW) rc = VERR_PDM_MEDIAEX_IOBUF_OVERFLOW; return rc; } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqCopyToBuf} */ static DECLCALLBACK(int) ahciR3IoReqCopyToBuf(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, uint32_t offSrc, PRTSGBUF pSgBuf, size_t cbCopy) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IMediaExPort); int rc = VINF_SUCCESS; PAHCIREQ pIoReq = (PAHCIREQ)pvIoReqAlloc; RT_NOREF(hIoReq); ahciR3CopySgBufFromPrdtl(pAhciPortR3->pDevIns, pIoReq, pSgBuf, offSrc, cbCopy); if (pIoReq->fFlags & AHCI_REQ_OVERFLOW) rc = VERR_PDM_MEDIAEX_IOBUF_UNDERRUN; return rc; } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqQueryBuf} */ static DECLCALLBACK(int) ahciR3IoReqQueryBuf(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, void **ppvBuf, size_t *pcbBuf) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IMediaExPort); PPDMDEVINS pDevIns = pAhciPortR3->pDevIns; PAHCIREQ pIoReq = (PAHCIREQ)pvIoReqAlloc; int rc = VERR_NOT_SUPPORTED; RT_NOREF(hIoReq); /* Only allow single 4KB page aligned buffers at the moment. */ if ( pIoReq->cPrdtlEntries == 1 && pIoReq->cbTransfer == _4K) { RTGCPHYS GCPhysPrdt = pIoReq->GCPhysPrdtl; SGLEntry PrdtEntry; PDMDevHlpPCIPhysReadMeta(pDevIns, GCPhysPrdt, &PrdtEntry, sizeof(SGLEntry)); RTGCPHYS GCPhysAddrDataBase = AHCI_RTGCPHYS_FROM_U32(PrdtEntry.u32DBAUp, PrdtEntry.u32DBA); uint32_t cbData = (PrdtEntry.u32DescInf & SGLENTRY_DESCINF_DBC) + 1; if ( cbData >= _4K && !(GCPhysAddrDataBase & (_4K - 1))) { rc = PDMDevHlpPCIPhysGCPhys2CCPtr(pDevIns, NULL /* pPciDev */, GCPhysAddrDataBase, 0, ppvBuf, &pIoReq->PgLck); if (RT_SUCCESS(rc)) { pIoReq->fMapped = true; *pcbBuf = cbData; } else rc = VERR_NOT_SUPPORTED; } } return rc; } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqQueryDiscardRanges} */ static DECLCALLBACK(int) ahciR3IoReqQueryDiscardRanges(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, uint32_t idxRangeStart, uint32_t cRanges, PRTRANGE paRanges, uint32_t *pcRanges) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IMediaExPort); PPDMDEVINS pDevIns = pAhciPortR3->pDevIns; PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIPORT pAhciPort = &RT_SAFE_SUBSCRIPT(pThis->aPorts, pAhciPortR3->iLUN); PAHCIREQ pIoReq = (PAHCIREQ)pvIoReqAlloc; RT_NOREF(hIoReq); return ahciTrimRangesCreate(pDevIns, pAhciPort, pIoReq, idxRangeStart, paRanges, cRanges, pcRanges); } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqCompleteNotify} */ static DECLCALLBACK(int) ahciR3IoReqCompleteNotify(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, int rcReq) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IMediaExPort); PPDMDEVINS pDevIns = pAhciPortR3->pDevIns; PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIPORT pAhciPort = &RT_SAFE_SUBSCRIPT(pThis->aPorts, pAhciPortR3->iLUN); PAHCIREQ pIoReq = (PAHCIREQ)pvIoReqAlloc; RT_NOREF(hIoReq); ahciR3TransferComplete(pDevIns, pThis, pThisCC, pAhciPort, pAhciPortR3, pIoReq, rcReq); return VINF_SUCCESS; } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqStateChanged} */ static DECLCALLBACK(void) ahciR3IoReqStateChanged(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, PDMMEDIAEXIOREQSTATE enmState) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IMediaExPort); PPDMDEVINS pDevIns = pAhciPortR3->pDevIns; PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIPORT pAhciPort = &RT_SAFE_SUBSCRIPT(pThis->aPorts, pAhciPortR3->iLUN); RT_NOREF(hIoReq, pvIoReqAlloc); switch (enmState) { case PDMMEDIAEXIOREQSTATE_SUSPENDED: { /* Make sure the request is not accounted for so the VM can suspend successfully. */ uint32_t cTasksActive = ASMAtomicDecU32(&pAhciPort->cTasksActive); if (!cTasksActive && pThisCC->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pDevIns); break; } case PDMMEDIAEXIOREQSTATE_ACTIVE: /* Make sure the request is accounted for so the VM suspends only when the request is complete. */ ASMAtomicIncU32(&pAhciPort->cTasksActive); break; default: AssertMsgFailed(("Invalid request state given %u\n", enmState)); } } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnMediumEjected} */ static DECLCALLBACK(void) ahciR3MediumEjected(PPDMIMEDIAEXPORT pInterface) { PAHCIPORTR3 pAhciPortR3 = RT_FROM_MEMBER(pInterface, AHCIPORTR3, IMediaExPort); PPDMDEVINS pDevIns = pAhciPortR3->pDevIns; PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIPORT pAhciPort = &RT_SAFE_SUBSCRIPT(pThis->aPorts, pAhciPortR3->iLUN); if (pThisCC->pMediaNotify) { int rc = PDMDevHlpVMReqCallNoWait(pDevIns, VMCPUID_ANY, (PFNRT)pThisCC->pMediaNotify->pfnEjected, 2, pThisCC->pMediaNotify, pAhciPort->iLUN); AssertRC(rc); } } /** * Process an non read/write ATA command. * * @returns The direction of the data transfer * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pAhciPort The AHCI port of the request, shared bits. * @param pAhciPortR3 The AHCI port of the request, ring-3 bits. * @param pAhciReq The AHCI request state. * @param pCmdFis Pointer to the command FIS. */ static PDMMEDIAEXIOREQTYPE ahciProcessCmd(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, PAHCIPORTR3 pAhciPortR3, PAHCIREQ pAhciReq, uint8_t *pCmdFis) { PDMMEDIAEXIOREQTYPE enmType = PDMMEDIAEXIOREQTYPE_INVALID; bool fLBA48 = false; AssertMsg(pCmdFis[AHCI_CMDFIS_TYPE] == AHCI_CMDFIS_TYPE_H2D, ("FIS is not a host to device Fis!!\n")); pAhciReq->cbTransfer = 0; switch (pCmdFis[AHCI_CMDFIS_CMD]) { case ATA_IDENTIFY_DEVICE: { if (pAhciPortR3->pDrvMedia && !pAhciPort->fATAPI) { uint16_t u16Temp[256]; /* Fill the buffer. */ ahciIdentifySS(pThis, pAhciPort, pAhciPortR3, u16Temp); /* Copy the buffer. */ size_t cbCopied = ahciR3CopyBufferToPrdtl(pDevIns, pAhciReq, &u16Temp[0], sizeof(u16Temp), 0 /* cbSkip */); pAhciReq->fFlags |= AHCI_REQ_PIO_DATA; pAhciReq->cbTransfer = cbCopied; ahciReqSetStatus(pAhciReq, 0, ATA_STAT_READY | ATA_STAT_SEEK); } else ahciReqSetStatus(pAhciReq, ABRT_ERR, ATA_STAT_READY | ATA_STAT_SEEK | ATA_STAT_ERR); break; } case ATA_READ_NATIVE_MAX_ADDRESS_EXT: case ATA_READ_NATIVE_MAX_ADDRESS: break; case ATA_SET_FEATURES: { switch (pCmdFis[AHCI_CMDFIS_FET]) { case 0x02: /* write cache enable */ case 0xaa: /* read look-ahead enable */ case 0x55: /* read look-ahead disable */ case 0xcc: /* reverting to power-on defaults enable */ case 0x66: /* reverting to power-on defaults disable */ ahciReqSetStatus(pAhciReq, 0, ATA_STAT_READY | ATA_STAT_SEEK); break; case 0x82: /* write cache disable */ enmType = PDMMEDIAEXIOREQTYPE_FLUSH; break; case 0x03: { /* set transfer mode */ Log2(("%s: transfer mode %#04x\n", __FUNCTION__, pCmdFis[AHCI_CMDFIS_SECTC])); switch (pCmdFis[AHCI_CMDFIS_SECTC] & 0xf8) { case 0x00: /* PIO default */ case 0x08: /* PIO mode */ break; case ATA_MODE_MDMA: /* MDMA mode */ pAhciPort->uATATransferMode = (pCmdFis[AHCI_CMDFIS_SECTC] & 0xf8) | RT_MIN(pCmdFis[AHCI_CMDFIS_SECTC] & 0x07, ATA_MDMA_MODE_MAX); break; case ATA_MODE_UDMA: /* UDMA mode */ pAhciPort->uATATransferMode = (pCmdFis[AHCI_CMDFIS_SECTC] & 0xf8) | RT_MIN(pCmdFis[AHCI_CMDFIS_SECTC] & 0x07, ATA_UDMA_MODE_MAX); break; } ahciReqSetStatus(pAhciReq, 0, ATA_STAT_READY | ATA_STAT_SEEK); break; } default: ahciReqSetStatus(pAhciReq, ABRT_ERR, ATA_STAT_READY | ATA_STAT_ERR); } break; } case ATA_DEVICE_RESET: { if (!pAhciPort->fATAPI) ahciReqSetStatus(pAhciReq, ABRT_ERR, ATA_STAT_READY | ATA_STAT_ERR); else { /* Reset the device. */ ahciDeviceReset(pDevIns, pThis, pAhciPort, pAhciReq); } break; } case ATA_FLUSH_CACHE_EXT: case ATA_FLUSH_CACHE: enmType = PDMMEDIAEXIOREQTYPE_FLUSH; break; case ATA_PACKET: if (!pAhciPort->fATAPI) ahciReqSetStatus(pAhciReq, ABRT_ERR, ATA_STAT_READY | ATA_STAT_ERR); else enmType = PDMMEDIAEXIOREQTYPE_SCSI; break; case ATA_IDENTIFY_PACKET_DEVICE: if (!pAhciPort->fATAPI) ahciReqSetStatus(pAhciReq, ABRT_ERR, ATA_STAT_READY | ATA_STAT_ERR); else { size_t cbData; ahciR3AtapiIdentify(pDevIns, pAhciReq, pAhciPort, 512, &cbData); pAhciReq->fFlags |= AHCI_REQ_PIO_DATA; pAhciReq->cbTransfer = cbData; pAhciReq->cmdFis[AHCI_CMDFIS_SECTN] = (pAhciReq->cmdFis[AHCI_CMDFIS_SECTN] & ~7) | ((pAhciReq->fFlags & AHCI_REQ_XFER_2_HOST) ? ATAPI_INT_REASON_IO : 0) | (!pAhciReq->cbTransfer ? ATAPI_INT_REASON_CD : 0); ahciReqSetStatus(pAhciReq, 0, ATA_STAT_READY | ATA_STAT_SEEK); } break; case ATA_SET_MULTIPLE_MODE: if ( pCmdFis[AHCI_CMDFIS_SECTC] != 0 && ( pCmdFis[AHCI_CMDFIS_SECTC] > ATA_MAX_MULT_SECTORS || (pCmdFis[AHCI_CMDFIS_SECTC] & (pCmdFis[AHCI_CMDFIS_SECTC] - 1)) != 0)) ahciReqSetStatus(pAhciReq, ABRT_ERR, ATA_STAT_READY | ATA_STAT_ERR); else { Log2(("%s: set multi sector count to %d\n", __FUNCTION__, pCmdFis[AHCI_CMDFIS_SECTC])); pAhciPort->cMultSectors = pCmdFis[AHCI_CMDFIS_SECTC]; ahciReqSetStatus(pAhciReq, 0, ATA_STAT_READY | ATA_STAT_SEEK); } break; case ATA_STANDBY_IMMEDIATE: break; /* Do nothing. */ case ATA_CHECK_POWER_MODE: pAhciReq->cmdFis[AHCI_CMDFIS_SECTC] = 0xff; /* drive active or idle */ RT_FALL_THRU(); case ATA_INITIALIZE_DEVICE_PARAMETERS: case ATA_IDLE_IMMEDIATE: case ATA_RECALIBRATE: case ATA_NOP: case ATA_READ_VERIFY_SECTORS_EXT: case ATA_READ_VERIFY_SECTORS: case ATA_READ_VERIFY_SECTORS_WITHOUT_RETRIES: case ATA_SLEEP: ahciReqSetStatus(pAhciReq, 0, ATA_STAT_READY | ATA_STAT_SEEK); break; case ATA_READ_DMA_EXT: fLBA48 = true; RT_FALL_THRU(); case ATA_READ_DMA: { pAhciReq->cbTransfer = ahciGetNSectors(pCmdFis, fLBA48) * pAhciPort->cbSector; pAhciReq->uOffset = ahciGetSector(pAhciPort, pCmdFis, fLBA48) * pAhciPort->cbSector; enmType = PDMMEDIAEXIOREQTYPE_READ; break; } case ATA_WRITE_DMA_EXT: fLBA48 = true; RT_FALL_THRU(); case ATA_WRITE_DMA: { pAhciReq->cbTransfer = ahciGetNSectors(pCmdFis, fLBA48) * pAhciPort->cbSector; pAhciReq->uOffset = ahciGetSector(pAhciPort, pCmdFis, fLBA48) * pAhciPort->cbSector; enmType = PDMMEDIAEXIOREQTYPE_WRITE; break; } case ATA_READ_FPDMA_QUEUED: { pAhciReq->cbTransfer = ahciGetNSectorsQueued(pCmdFis) * pAhciPort->cbSector; pAhciReq->uOffset = ahciGetSectorQueued(pCmdFis) * pAhciPort->cbSector; pAhciReq->fFlags |= AHCI_REQ_IS_QUEUED; enmType = PDMMEDIAEXIOREQTYPE_READ; break; } case ATA_WRITE_FPDMA_QUEUED: { pAhciReq->cbTransfer = ahciGetNSectorsQueued(pCmdFis) * pAhciPort->cbSector; pAhciReq->uOffset = ahciGetSectorQueued(pCmdFis) * pAhciPort->cbSector; pAhciReq->fFlags |= AHCI_REQ_IS_QUEUED; enmType = PDMMEDIAEXIOREQTYPE_WRITE; break; } case ATA_READ_LOG_EXT: { size_t cbLogRead = ((pCmdFis[AHCI_CMDFIS_SECTCEXP] << 8) | pCmdFis[AHCI_CMDFIS_SECTC]) * 512; unsigned offLogRead = ((pCmdFis[AHCI_CMDFIS_CYLLEXP] << 8) | pCmdFis[AHCI_CMDFIS_CYLL]) * 512; unsigned iPage = pCmdFis[AHCI_CMDFIS_SECTN]; LogFlow(("Trying to read %zu bytes starting at offset %u from page %u\n", cbLogRead, offLogRead, iPage)); uint8_t aBuf[512]; memset(aBuf, 0, sizeof(aBuf)); if (offLogRead + cbLogRead <= sizeof(aBuf)) { switch (iPage) { case 0x10: { LogFlow(("Reading error page\n")); PAHCIREQ pTaskErr = ASMAtomicXchgPtrT(&pAhciPortR3->pTaskErr, NULL, PAHCIREQ); if (pTaskErr) { aBuf[0] = (pTaskErr->fFlags & AHCI_REQ_IS_QUEUED) ? pTaskErr->uTag : (1 << 7); aBuf[2] = pTaskErr->cmdFis[AHCI_CMDFIS_STS]; aBuf[3] = pTaskErr->cmdFis[AHCI_CMDFIS_ERR]; aBuf[4] = pTaskErr->cmdFis[AHCI_CMDFIS_SECTN]; aBuf[5] = pTaskErr->cmdFis[AHCI_CMDFIS_CYLL]; aBuf[6] = pTaskErr->cmdFis[AHCI_CMDFIS_CYLH]; aBuf[7] = pTaskErr->cmdFis[AHCI_CMDFIS_HEAD]; aBuf[8] = pTaskErr->cmdFis[AHCI_CMDFIS_SECTNEXP]; aBuf[9] = pTaskErr->cmdFis[AHCI_CMDFIS_CYLLEXP]; aBuf[10] = pTaskErr->cmdFis[AHCI_CMDFIS_CYLHEXP]; aBuf[12] = pTaskErr->cmdFis[AHCI_CMDFIS_SECTC]; aBuf[13] = pTaskErr->cmdFis[AHCI_CMDFIS_SECTCEXP]; /* Calculate checksum */ uint8_t uChkSum = 0; for (unsigned i = 0; i < RT_ELEMENTS(aBuf)-1; i++) uChkSum += aBuf[i]; aBuf[511] = (uint8_t)-(int8_t)uChkSum; /* Finally free the error task state structure because it is completely unused now. */ RTMemFree(pTaskErr); } /* * Reading this log page results in an abort of all outstanding commands * and clearing the SActive register and TaskFile register. * * See SATA2 1.2 spec chapter 4.2.3.4 */ bool fAbortedAll = ahciR3CancelActiveTasks(pAhciPortR3); Assert(fAbortedAll); NOREF(fAbortedAll); ahciSendSDBFis(pDevIns, pThis, pAhciPort, pAhciPortR3, UINT32_C(0xffffffff), true); break; } } /* Copy the buffer. */ size_t cbCopied = ahciR3CopyBufferToPrdtl(pDevIns, pAhciReq, &aBuf[offLogRead], cbLogRead, 0 /* cbSkip */); pAhciReq->fFlags |= AHCI_REQ_PIO_DATA; pAhciReq->cbTransfer = cbCopied; } break; } case ATA_DATA_SET_MANAGEMENT: { if (pAhciPort->fTrimEnabled) { /* Check that the trim bit is set and all other bits are 0. */ if ( !(pAhciReq->cmdFis[AHCI_CMDFIS_FET] & UINT16_C(0x01)) || (pAhciReq->cmdFis[AHCI_CMDFIS_FET] & ~UINT16_C(0x1))) ahciReqSetStatus(pAhciReq, ABRT_ERR, ATA_STAT_READY | ATA_STAT_ERR); else enmType = PDMMEDIAEXIOREQTYPE_DISCARD; break; } /* else: fall through and report error to the guest. */ } RT_FALL_THRU(); /* All not implemented commands go below. */ case ATA_SECURITY_FREEZE_LOCK: case ATA_SMART: case ATA_NV_CACHE: case ATA_IDLE: case ATA_TRUSTED_RECEIVE_DMA: /* Windows 8+ */ ahciReqSetStatus(pAhciReq, ABRT_ERR, ATA_STAT_READY | ATA_STAT_ERR); break; default: /* For debugging purposes. */ AssertMsgFailed(("Unknown command issued (%#x)\n", pCmdFis[AHCI_CMDFIS_CMD])); ahciReqSetStatus(pAhciReq, ABRT_ERR, ATA_STAT_READY | ATA_STAT_ERR); } return enmType; } /** * Retrieve a command FIS from guest memory. * * @returns whether the H2D FIS was successfully read from the guest memory. * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pAhciPort The AHCI port of the request, shared bits. * @param pAhciReq The state of the actual task. */ static bool ahciPortTaskGetCommandFis(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, PAHCIREQ pAhciReq) { AssertMsgReturn(pAhciPort->GCPhysAddrClb && pAhciPort->GCPhysAddrFb, ("%s: GCPhysAddrClb and/or GCPhysAddrFb are 0\n", __FUNCTION__), false); /* * First we are reading the command header pointed to by regCLB. * From this we get the address of the command table which we are reading too. * We can process the Command FIS afterwards. */ CmdHdr cmdHdr; pAhciReq->GCPhysCmdHdrAddr = pAhciPort->GCPhysAddrClb + pAhciReq->uTag * sizeof(CmdHdr); LogFlow(("%s: PDMDevHlpPCIPhysReadMeta GCPhysAddrCmdLst=%RGp cbCmdHdr=%u\n", __FUNCTION__, pAhciReq->GCPhysCmdHdrAddr, sizeof(CmdHdr))); PDMDevHlpPCIPhysReadMeta(pDevIns, pAhciReq->GCPhysCmdHdrAddr, &cmdHdr, sizeof(CmdHdr)); #ifdef LOG_ENABLED /* Print some infos about the command header. */ ahciDumpCmdHdrInfo(pAhciPort, &cmdHdr); #endif RTGCPHYS GCPhysAddrCmdTbl = AHCI_RTGCPHYS_FROM_U32(cmdHdr.u32CmdTblAddrUp, cmdHdr.u32CmdTblAddr); AssertMsgReturn((cmdHdr.u32DescInf & AHCI_CMDHDR_CFL_MASK) * sizeof(uint32_t) == AHCI_CMDFIS_TYPE_H2D_SIZE, ("This is not a command FIS!!\n"), false); /* Read the command Fis. */ LogFlow(("%s: PDMDevHlpPCIPhysReadMeta GCPhysAddrCmdTbl=%RGp cbCmdFis=%u\n", __FUNCTION__, GCPhysAddrCmdTbl, AHCI_CMDFIS_TYPE_H2D_SIZE)); PDMDevHlpPCIPhysReadMeta(pDevIns, GCPhysAddrCmdTbl, &pAhciReq->cmdFis[0], AHCI_CMDFIS_TYPE_H2D_SIZE); AssertMsgReturn(pAhciReq->cmdFis[AHCI_CMDFIS_TYPE] == AHCI_CMDFIS_TYPE_H2D, ("This is not a command FIS\n"), false); /* Set transfer direction. */ pAhciReq->fFlags |= (cmdHdr.u32DescInf & AHCI_CMDHDR_W) ? 0 : AHCI_REQ_XFER_2_HOST; /* If this is an ATAPI command read the atapi command. */ if (cmdHdr.u32DescInf & AHCI_CMDHDR_A) { GCPhysAddrCmdTbl += AHCI_CMDHDR_ACMD_OFFSET; PDMDevHlpPCIPhysReadMeta(pDevIns, GCPhysAddrCmdTbl, &pAhciReq->aATAPICmd[0], ATAPI_PACKET_SIZE); } /* We "received" the FIS. Clear the BSY bit in regTFD. */ if ((cmdHdr.u32DescInf & AHCI_CMDHDR_C) && (pAhciReq->fFlags & AHCI_REQ_CLEAR_SACT)) { /* * We need to send a FIS which clears the busy bit if this is a queued command so that the guest can queue other commands. * but this FIS does not assert an interrupt */ ahciSendD2HFis(pDevIns, pThis, pAhciPort, pAhciReq->uTag, pAhciReq->cmdFis, false); pAhciPort->regTFD &= ~AHCI_PORT_TFD_BSY; } pAhciReq->GCPhysPrdtl = AHCI_RTGCPHYS_FROM_U32(cmdHdr.u32CmdTblAddrUp, cmdHdr.u32CmdTblAddr) + AHCI_CMDHDR_PRDT_OFFSET; pAhciReq->cPrdtlEntries = AHCI_CMDHDR_PRDTL_ENTRIES(cmdHdr.u32DescInf); #ifdef LOG_ENABLED /* Print some infos about the FIS. */ ahciDumpFisInfo(pAhciPort, &pAhciReq->cmdFis[0]); /* Print the PRDT */ ahciLog(("PRDT address %RGp number of entries %u\n", pAhciReq->GCPhysPrdtl, pAhciReq->cPrdtlEntries)); RTGCPHYS GCPhysPrdtl = pAhciReq->GCPhysPrdtl; for (unsigned i = 0; i < pAhciReq->cPrdtlEntries; i++) { SGLEntry SGEntry; ahciLog(("Entry %u at address %RGp\n", i, GCPhysPrdtl)); PDMDevHlpPCIPhysReadMeta(pDevIns, GCPhysPrdtl, &SGEntry, sizeof(SGLEntry)); RTGCPHYS GCPhysDataAddr = AHCI_RTGCPHYS_FROM_U32(SGEntry.u32DBAUp, SGEntry.u32DBA); ahciLog(("GCPhysAddr=%RGp Size=%u\n", GCPhysDataAddr, SGEntry.u32DescInf & SGLENTRY_DESCINF_DBC)); GCPhysPrdtl += sizeof(SGLEntry); } #endif return true; } /** * Submits a given request for execution. * * @returns Flag whether the request was canceled inbetween. * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pThisCC The ring-3 AHCI state. * @param pAhciPort The port the request is for, shared bits. * @param pAhciPortR3 The port the request is for, ring-3 bits. * @param pAhciReq The request to submit. * @param enmType The request type. */ static bool ahciR3ReqSubmit(PPDMDEVINS pDevIns, PAHCI pThis, PAHCICC pThisCC, PAHCIPORT pAhciPort, PAHCIPORTR3 pAhciPortR3, PAHCIREQ pAhciReq, PDMMEDIAEXIOREQTYPE enmType) { int rc = VINF_SUCCESS; bool fReqCanceled = false; VBOXDD_AHCI_REQ_SUBMIT(pAhciReq, pAhciReq->enmType, pAhciReq->uOffset, pAhciReq->cbTransfer); if (enmType == PDMMEDIAEXIOREQTYPE_FLUSH) rc = pAhciPortR3->pDrvMediaEx->pfnIoReqFlush(pAhciPortR3->pDrvMediaEx, pAhciReq->hIoReq); else if (enmType == PDMMEDIAEXIOREQTYPE_DISCARD) { uint32_t cRangesMax; /* The data buffer contains LBA range entries. Each range is 8 bytes big. */ if (!pAhciReq->cmdFis[AHCI_CMDFIS_SECTC] && !pAhciReq->cmdFis[AHCI_CMDFIS_SECTCEXP]) cRangesMax = 65536 * 512 / 8; else cRangesMax = pAhciReq->cmdFis[AHCI_CMDFIS_SECTC] * 512 / 8; pAhciPort->Led.Asserted.s.fWriting = pAhciPort->Led.Actual.s.fWriting = 1; rc = pAhciPortR3->pDrvMediaEx->pfnIoReqDiscard(pAhciPortR3->pDrvMediaEx, pAhciReq->hIoReq, cRangesMax); } else if (enmType == PDMMEDIAEXIOREQTYPE_READ) { pAhciPort->Led.Asserted.s.fReading = pAhciPort->Led.Actual.s.fReading = 1; rc = pAhciPortR3->pDrvMediaEx->pfnIoReqRead(pAhciPortR3->pDrvMediaEx, pAhciReq->hIoReq, pAhciReq->uOffset, pAhciReq->cbTransfer); } else if (enmType == PDMMEDIAEXIOREQTYPE_WRITE) { pAhciPort->Led.Asserted.s.fWriting = pAhciPort->Led.Actual.s.fWriting = 1; rc = pAhciPortR3->pDrvMediaEx->pfnIoReqWrite(pAhciPortR3->pDrvMediaEx, pAhciReq->hIoReq, pAhciReq->uOffset, pAhciReq->cbTransfer); } else if (enmType == PDMMEDIAEXIOREQTYPE_SCSI) { size_t cbBuf = 0; if (pAhciReq->cPrdtlEntries) rc = ahciR3PrdtQuerySize(pDevIns, pAhciReq, &cbBuf); pAhciReq->cbTransfer = cbBuf; if (RT_SUCCESS(rc)) { if (cbBuf && (pAhciReq->fFlags & AHCI_REQ_XFER_2_HOST)) pAhciPort->Led.Asserted.s.fReading = pAhciPort->Led.Actual.s.fReading = 1; else if (cbBuf) pAhciPort->Led.Asserted.s.fWriting = pAhciPort->Led.Actual.s.fWriting = 1; rc = pAhciPortR3->pDrvMediaEx->pfnIoReqSendScsiCmd(pAhciPortR3->pDrvMediaEx, pAhciReq->hIoReq, 0, &pAhciReq->aATAPICmd[0], ATAPI_PACKET_SIZE, PDMMEDIAEXIOREQSCSITXDIR_UNKNOWN, NULL, cbBuf, &pAhciPort->abATAPISense[0], sizeof(pAhciPort->abATAPISense), NULL, &pAhciReq->u8ScsiSts, 30 * RT_MS_1SEC); } } if (rc == VINF_SUCCESS) fReqCanceled = ahciR3TransferComplete(pDevIns, pThis, pThisCC, pAhciPort, pAhciPortR3, pAhciReq, VINF_SUCCESS); else if (rc != VINF_PDM_MEDIAEX_IOREQ_IN_PROGRESS) fReqCanceled = ahciR3TransferComplete(pDevIns, pThis, pThisCC, pAhciPort, pAhciPortR3, pAhciReq, rc); return fReqCanceled; } /** * Prepares the command for execution coping it from guest memory and doing a few * validation checks on it. * * @returns Whether the command was successfully fetched from guest memory and * can be continued. * @param pDevIns The device instance. * @param pThis The shared AHCI state. * @param pAhciPort The AHCI port the request is for, shared bits. * @param pAhciReq Request structure to copy the command to. */ static bool ahciR3CmdPrepare(PPDMDEVINS pDevIns, PAHCI pThis, PAHCIPORT pAhciPort, PAHCIREQ pAhciReq) { /* Set current command slot */ ASMAtomicWriteU32(&pAhciPort->u32CurrentCommandSlot, pAhciReq->uTag); bool fContinue = ahciPortTaskGetCommandFis(pDevIns, pThis, pAhciPort, pAhciReq); if (fContinue) { /* Mark the task as processed by the HBA if this is a queued task so that it doesn't occur in the CI register anymore. */ if (pAhciPort->regSACT & RT_BIT_32(pAhciReq->uTag)) { pAhciReq->fFlags |= AHCI_REQ_CLEAR_SACT; ASMAtomicOrU32(&pAhciPort->u32TasksFinished, RT_BIT_32(pAhciReq->uTag)); } if (pAhciReq->cmdFis[AHCI_CMDFIS_BITS] & AHCI_CMDFIS_C) { /* * It is possible that the request counter can get one higher than the maximum because * the request counter is decremented after the guest was notified about the completed * request (see @bugref{7859}). If the completing thread is preempted in between the * guest might already issue another request before the request counter is decremented * which would trigger the following assertion incorrectly in the past. */ AssertLogRelMsg(ASMAtomicReadU32(&pAhciPort->cTasksActive) <= AHCI_NR_COMMAND_SLOTS, ("AHCI#%uP%u: There are more than %u (+1) requests active", pDevIns->iInstance, pAhciPort->iLUN, AHCI_NR_COMMAND_SLOTS)); ASMAtomicIncU32(&pAhciPort->cTasksActive); } else { /* If the reset bit is set put the device into reset state. */ if (pAhciReq->cmdFis[AHCI_CMDFIS_CTL] & AHCI_CMDFIS_CTL_SRST) { ahciLog(("%s: Setting device into reset state\n", __FUNCTION__)); pAhciPort->fResetDevice = true; ahciSendD2HFis(pDevIns, pThis, pAhciPort, pAhciReq->uTag, pAhciReq->cmdFis, true); } else if (pAhciPort->fResetDevice) /* The bit is not set and we are in a reset state. */ ahciFinishStorageDeviceReset(pDevIns, pThis, pAhciPort, pAhciReq); else /* We are not in a reset state update the control registers. */ AssertMsgFailed(("%s: Update the control register\n", __FUNCTION__)); fContinue = false; } } else { /* * Couldn't find anything in either the AHCI or SATA spec which * indicates what should be done if the FIS is not read successfully. * The closest thing is in the state machine, stating that the device * should go into idle state again (SATA spec 1.0 chapter 8.7.1). * Do the same here and ignore any corrupt FIS types, after all * the guest messed up everything and this behavior is undefined. */ fContinue = false; } return fContinue; } /** * @callback_method_impl{FNPDMTHREADDEV, The async IO thread for one port.} */ static DECLCALLBACK(int) ahciAsyncIOLoop(PPDMDEVINS pDevIns, PPDMTHREAD pThread) { PAHCIPORTR3 pAhciPortR3 = (PAHCIPORTR3)pThread->pvUser; PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); PAHCIPORT pAhciPort = &RT_SAFE_SUBSCRIPT(pThis->aPorts, pAhciPortR3->iLUN); int rc = VINF_SUCCESS; ahciLog(("%s: Port %d entering async IO loop.\n", __FUNCTION__, pAhciPort->iLUN)); if (pThread->enmState == PDMTHREADSTATE_INITIALIZING) return VINF_SUCCESS; while (pThread->enmState == PDMTHREADSTATE_RUNNING) { unsigned idx = 0; uint32_t u32Tasks = 0; uint32_t u32RegHbaCtrl = 0; ASMAtomicWriteBool(&pAhciPort->fWrkThreadSleeping, true); u32Tasks = ASMAtomicXchgU32(&pAhciPort->u32TasksNew, 0); if (!u32Tasks) { Assert(ASMAtomicReadBool(&pAhciPort->fWrkThreadSleeping)); rc = PDMDevHlpSUPSemEventWaitNoResume(pDevIns, pAhciPort->hEvtProcess, RT_INDEFINITE_WAIT); AssertLogRelMsgReturn(RT_SUCCESS(rc) || rc == VERR_INTERRUPTED, ("%Rrc\n", rc), rc); if (RT_UNLIKELY(pThread->enmState != PDMTHREADSTATE_RUNNING)) break; LogFlowFunc(("Woken up with rc=%Rrc\n", rc)); u32Tasks = ASMAtomicXchgU32(&pAhciPort->u32TasksNew, 0); } ASMAtomicWriteBool(&pAhciPort->fWrkThreadSleeping, false); ASMAtomicIncU32(&pThis->cThreadsActive); /* Check whether the thread should be suspended. */ if (pThisCC->fSignalIdle) { if (!ASMAtomicDecU32(&pThis->cThreadsActive)) PDMDevHlpAsyncNotificationCompleted(pDevIns); continue; } /* * Check whether the global host controller bit is set and go to sleep immediately again * if it is set. */ u32RegHbaCtrl = ASMAtomicReadU32(&pThis->regHbaCtrl); if ( u32RegHbaCtrl & AHCI_HBA_CTRL_HR && !ASMAtomicDecU32(&pThis->cThreadsActive)) { ahciR3HBAReset(pDevIns, pThis, pThisCC); if (pThisCC->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pDevIns); continue; } idx = ASMBitFirstSetU32(u32Tasks); while ( idx && !pAhciPort->fPortReset) { bool fReqCanceled = false; /* Decrement to get the slot number. */ idx--; ahciLog(("%s: Processing command at slot %d\n", __FUNCTION__, idx)); PAHCIREQ pAhciReq = ahciR3ReqAlloc(pAhciPortR3, idx); if (RT_LIKELY(pAhciReq)) { pAhciReq->uTag = idx; pAhciReq->fFlags = 0; bool fContinue = ahciR3CmdPrepare(pDevIns, pThis, pAhciPort, pAhciReq); if (fContinue) { PDMMEDIAEXIOREQTYPE enmType = ahciProcessCmd(pDevIns, pThis, pAhciPort, pAhciPortR3, pAhciReq, pAhciReq->cmdFis); pAhciReq->enmType = enmType; if (enmType != PDMMEDIAEXIOREQTYPE_INVALID) fReqCanceled = ahciR3ReqSubmit(pDevIns, pThis, pThisCC, pAhciPort, pAhciPortR3, pAhciReq, enmType); else fReqCanceled = ahciR3TransferComplete(pDevIns, pThis, pThisCC, pAhciPort, pAhciPortR3, pAhciReq, VINF_SUCCESS); } /* Command */ else ahciR3ReqFree(pAhciPortR3, pAhciReq); } else /* !Request allocated, use on stack variant to signal the error. */ { AHCIREQ Req; Req.uTag = idx; Req.fFlags = AHCI_REQ_IS_ON_STACK; Req.fMapped = false; Req.cbTransfer = 0; Req.uOffset = 0; Req.enmType = PDMMEDIAEXIOREQTYPE_INVALID; bool fContinue = ahciR3CmdPrepare(pDevIns, pThis, pAhciPort, &Req); if (fContinue) fReqCanceled = ahciR3TransferComplete(pDevIns, pThis, pThisCC, pAhciPort, pAhciPortR3, &Req, VERR_NO_MEMORY); } /* * Don't process other requests if the last one was canceled, * the others are not valid anymore. */ if (fReqCanceled) break; u32Tasks &= ~RT_BIT_32(idx); /* Clear task bit. */ idx = ASMBitFirstSetU32(u32Tasks); } /* while tasks available */ /* Check whether a port reset was active. */ if ( ASMAtomicReadBool(&pAhciPort->fPortReset) && (pAhciPort->regSCTL & AHCI_PORT_SCTL_DET) == AHCI_PORT_SCTL_DET_NINIT) ahciPortResetFinish(pDevIns, pThis, pAhciPort, pAhciPortR3); /* * Check whether a host controller reset is pending and execute the reset * if this is the last active thread. */ u32RegHbaCtrl = ASMAtomicReadU32(&pThis->regHbaCtrl); uint32_t cThreadsActive = ASMAtomicDecU32(&pThis->cThreadsActive); if ( (u32RegHbaCtrl & AHCI_HBA_CTRL_HR) && !cThreadsActive) ahciR3HBAReset(pDevIns, pThis, pThisCC); if (!cThreadsActive && pThisCC->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pDevIns); } /* While running */ ahciLog(("%s: Port %d async IO thread exiting\n", __FUNCTION__, pAhciPort->iLUN)); return VINF_SUCCESS; } /** * @callback_method_impl{FNPDMTHREADWAKEUPDEV} */ static DECLCALLBACK(int) ahciAsyncIOLoopWakeUp(PPDMDEVINS pDevIns, PPDMTHREAD pThread) { PAHCIPORTR3 pAhciPortR3 = (PAHCIPORTR3)pThread->pvUser; PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIPORT pAhciPort = &RT_SAFE_SUBSCRIPT(pThis->aPorts, pAhciPortR3->iLUN); return PDMDevHlpSUPSemEventSignal(pDevIns, pAhciPort->hEvtProcess); } /* -=-=-=-=- DBGF -=-=-=-=- */ /** * AHCI status info callback. * * @param pDevIns The device instance. * @param pHlp The output helpers. * @param pszArgs The arguments. */ static DECLCALLBACK(void) ahciR3Info(PPDMDEVINS pDevIns, PCDBGFINFOHLP pHlp, const char *pszArgs) { RT_NOREF(pszArgs); PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); /* * Show info. */ pHlp->pfnPrintf(pHlp, "%s#%d: mmio=%RGp ports=%u GC=%RTbool R0=%RTbool\n", pDevIns->pReg->szName, pDevIns->iInstance, PDMDevHlpMmioGetMappingAddress(pDevIns, pThis->hMmio), pThis->cPortsImpl, pDevIns->fRCEnabled, pDevIns->fR0Enabled); /* * Show global registers. */ pHlp->pfnPrintf(pHlp, "HbaCap=%#x\n", pThis->regHbaCap); pHlp->pfnPrintf(pHlp, "HbaCtrl=%#x\n", pThis->regHbaCtrl); pHlp->pfnPrintf(pHlp, "HbaIs=%#x\n", pThis->regHbaIs); pHlp->pfnPrintf(pHlp, "HbaPi=%#x\n", pThis->regHbaPi); pHlp->pfnPrintf(pHlp, "HbaVs=%#x\n", pThis->regHbaVs); pHlp->pfnPrintf(pHlp, "HbaCccCtl=%#x\n", pThis->regHbaCccCtl); pHlp->pfnPrintf(pHlp, "HbaCccPorts=%#x\n", pThis->regHbaCccPorts); pHlp->pfnPrintf(pHlp, "PortsInterrupted=%#x\n", pThis->u32PortsInterrupted); /* * Per port data. */ uint32_t const cPortsImpl = RT_MIN(pThis->cPortsImpl, RT_ELEMENTS(pThis->aPorts)); for (unsigned i = 0; i < cPortsImpl; i++) { PAHCIPORT pThisPort = &pThis->aPorts[i]; pHlp->pfnPrintf(pHlp, "Port %d: device-attached=%RTbool\n", pThisPort->iLUN, pThisPort->fPresent); pHlp->pfnPrintf(pHlp, "PortClb=%#x\n", pThisPort->regCLB); pHlp->pfnPrintf(pHlp, "PortClbU=%#x\n", pThisPort->regCLBU); pHlp->pfnPrintf(pHlp, "PortFb=%#x\n", pThisPort->regFB); pHlp->pfnPrintf(pHlp, "PortFbU=%#x\n", pThisPort->regFBU); pHlp->pfnPrintf(pHlp, "PortIs=%#x\n", pThisPort->regIS); pHlp->pfnPrintf(pHlp, "PortIe=%#x\n", pThisPort->regIE); pHlp->pfnPrintf(pHlp, "PortCmd=%#x\n", pThisPort->regCMD); pHlp->pfnPrintf(pHlp, "PortTfd=%#x\n", pThisPort->regTFD); pHlp->pfnPrintf(pHlp, "PortSig=%#x\n", pThisPort->regSIG); pHlp->pfnPrintf(pHlp, "PortSSts=%#x\n", pThisPort->regSSTS); pHlp->pfnPrintf(pHlp, "PortSCtl=%#x\n", pThisPort->regSCTL); pHlp->pfnPrintf(pHlp, "PortSErr=%#x\n", pThisPort->regSERR); pHlp->pfnPrintf(pHlp, "PortSAct=%#x\n", pThisPort->regSACT); pHlp->pfnPrintf(pHlp, "PortCi=%#x\n", pThisPort->regCI); pHlp->pfnPrintf(pHlp, "PortPhysClb=%RGp\n", pThisPort->GCPhysAddrClb); pHlp->pfnPrintf(pHlp, "PortPhysFb=%RGp\n", pThisPort->GCPhysAddrFb); pHlp->pfnPrintf(pHlp, "PortActTasksActive=%u\n", pThisPort->cTasksActive); pHlp->pfnPrintf(pHlp, "PortPoweredOn=%RTbool\n", pThisPort->fPoweredOn); pHlp->pfnPrintf(pHlp, "PortSpunUp=%RTbool\n", pThisPort->fSpunUp); pHlp->pfnPrintf(pHlp, "PortFirstD2HFisSent=%RTbool\n", pThisPort->fFirstD2HFisSent); pHlp->pfnPrintf(pHlp, "PortATAPI=%RTbool\n", pThisPort->fATAPI); pHlp->pfnPrintf(pHlp, "PortTasksFinished=%#x\n", pThisPort->u32TasksFinished); pHlp->pfnPrintf(pHlp, "PortQueuedTasksFinished=%#x\n", pThisPort->u32QueuedTasksFinished); pHlp->pfnPrintf(pHlp, "PortTasksNew=%#x\n", pThisPort->u32TasksNew); pHlp->pfnPrintf(pHlp, "\n"); } } /* -=-=-=-=- Helper -=-=-=-=- */ /** * Checks if all asynchronous I/O is finished, both AHCI and IDE. * * Used by ahciR3Reset, ahciR3Suspend and ahciR3PowerOff. ahciR3SavePrep makes * use of it in strict builds (which is why it's up here). * * @returns true if quiesced, false if busy. * @param pDevIns The device instance. */ static bool ahciR3AllAsyncIOIsFinished(PPDMDEVINS pDevIns) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); if (pThis->cThreadsActive) return false; for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aPorts); i++) { PAHCIPORT pThisPort = &pThis->aPorts[i]; if (pThisPort->fPresent) { if ( (pThisPort->cTasksActive != 0) || (pThisPort->u32TasksNew != 0)) return false; } } return true; } /* -=-=-=-=- Saved State -=-=-=-=- */ /** * @callback_method_impl{FNSSMDEVSAVEPREP} */ static DECLCALLBACK(int) ahciR3SavePrep(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { RT_NOREF(pDevIns, pSSM); Assert(ahciR3AllAsyncIOIsFinished(pDevIns)); return VINF_SUCCESS; } /** * @callback_method_impl{FNSSMDEVLOADPREP} */ static DECLCALLBACK(int) ahciR3LoadPrep(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { RT_NOREF(pDevIns, pSSM); Assert(ahciR3AllAsyncIOIsFinished(pDevIns)); return VINF_SUCCESS; } /** * @callback_method_impl{FNSSMDEVLIVEEXEC} */ static DECLCALLBACK(int) ahciR3LiveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uPass) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; RT_NOREF(uPass); /* config. */ pHlp->pfnSSMPutU32(pSSM, pThis->cPortsImpl); for (uint32_t i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { pHlp->pfnSSMPutBool(pSSM, pThis->aPorts[i].fPresent); pHlp->pfnSSMPutBool(pSSM, pThis->aPorts[i].fHotpluggable); pHlp->pfnSSMPutStrZ(pSSM, pThis->aPorts[i].szSerialNumber); pHlp->pfnSSMPutStrZ(pSSM, pThis->aPorts[i].szFirmwareRevision); pHlp->pfnSSMPutStrZ(pSSM, pThis->aPorts[i].szModelNumber); } static const char *s_apszIdeEmuPortNames[4] = { "PrimaryMaster", "PrimarySlave", "SecondaryMaster", "SecondarySlave" }; for (uint32_t i = 0; i < RT_ELEMENTS(s_apszIdeEmuPortNames); i++) { uint32_t iPort; int rc = pHlp->pfnCFGMQueryU32Def(pDevIns->pCfg, s_apszIdeEmuPortNames[i], &iPort, i); AssertRCReturn(rc, rc); pHlp->pfnSSMPutU32(pSSM, iPort); } return VINF_SSM_DONT_CALL_AGAIN; } /** * @callback_method_impl{FNSSMDEVSAVEEXEC} */ static DECLCALLBACK(int) ahciR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; uint32_t i; int rc; Assert(!pThis->f8ByteMMIO4BytesWrittenSuccessfully); /* The config */ rc = ahciR3LiveExec(pDevIns, pSSM, SSM_PASS_FINAL); AssertRCReturn(rc, rc); /* The main device structure. */ pHlp->pfnSSMPutU32(pSSM, pThis->regHbaCap); pHlp->pfnSSMPutU32(pSSM, pThis->regHbaCtrl); pHlp->pfnSSMPutU32(pSSM, pThis->regHbaIs); pHlp->pfnSSMPutU32(pSSM, pThis->regHbaPi); pHlp->pfnSSMPutU32(pSSM, pThis->regHbaVs); pHlp->pfnSSMPutU32(pSSM, pThis->regHbaCccCtl); pHlp->pfnSSMPutU32(pSSM, pThis->regHbaCccPorts); pHlp->pfnSSMPutU8(pSSM, pThis->uCccPortNr); pHlp->pfnSSMPutU64(pSSM, pThis->uCccTimeout); pHlp->pfnSSMPutU32(pSSM, pThis->uCccNr); pHlp->pfnSSMPutU32(pSSM, pThis->uCccCurrentNr); pHlp->pfnSSMPutU32(pSSM, pThis->u32PortsInterrupted); pHlp->pfnSSMPutBool(pSSM, pThis->fReset); pHlp->pfnSSMPutBool(pSSM, pThis->f64BitAddr); pHlp->pfnSSMPutBool(pSSM, pDevIns->fR0Enabled); pHlp->pfnSSMPutBool(pSSM, pDevIns->fRCEnabled); pHlp->pfnSSMPutBool(pSSM, pThis->fLegacyPortResetMethod); /* Now every port. */ for (i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { Assert(pThis->aPorts[i].cTasksActive == 0); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regCLB); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regCLBU); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regFB); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regFBU); pHlp->pfnSSMPutGCPhys(pSSM, pThis->aPorts[i].GCPhysAddrClb); pHlp->pfnSSMPutGCPhys(pSSM, pThis->aPorts[i].GCPhysAddrFb); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regIS); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regIE); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regCMD); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regTFD); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regSIG); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regSSTS); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regSCTL); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regSERR); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regSACT); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].regCI); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].PCHSGeometry.cCylinders); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].PCHSGeometry.cHeads); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].PCHSGeometry.cSectors); pHlp->pfnSSMPutU64(pSSM, pThis->aPorts[i].cTotalSectors); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].cMultSectors); pHlp->pfnSSMPutU8(pSSM, pThis->aPorts[i].uATATransferMode); pHlp->pfnSSMPutBool(pSSM, pThis->aPorts[i].fResetDevice); pHlp->pfnSSMPutBool(pSSM, pThis->aPorts[i].fPoweredOn); pHlp->pfnSSMPutBool(pSSM, pThis->aPorts[i].fSpunUp); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].u32TasksFinished); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].u32QueuedTasksFinished); pHlp->pfnSSMPutU32(pSSM, pThis->aPorts[i].u32CurrentCommandSlot); /* ATAPI saved state. */ pHlp->pfnSSMPutBool(pSSM, pThis->aPorts[i].fATAPI); pHlp->pfnSSMPutMem(pSSM, &pThis->aPorts[i].abATAPISense[0], sizeof(pThis->aPorts[i].abATAPISense)); } return pHlp->pfnSSMPutU32(pSSM, UINT32_MAX); /* sanity/terminator */ } /** * Loads a saved legacy ATA emulated device state. * * @returns VBox status code. * @param pHlp The device helper call table. * @param pSSM The handle to the saved state. */ static int ahciR3LoadLegacyEmulationState(PCPDMDEVHLPR3 pHlp, PSSMHANDLE pSSM) { int rc; uint32_t u32Version; uint32_t u32; uint32_t u32IOBuffer; /* Test for correct version. */ rc = pHlp->pfnSSMGetU32(pSSM, &u32Version); AssertRCReturn(rc, rc); LogFlow(("LoadOldSavedStates u32Version = %d\n", u32Version)); if ( u32Version != ATA_CTL_SAVED_STATE_VERSION && u32Version != ATA_CTL_SAVED_STATE_VERSION_WITHOUT_FULL_SENSE && u32Version != ATA_CTL_SAVED_STATE_VERSION_WITHOUT_EVENT_STATUS) { AssertMsgFailed(("u32Version=%d\n", u32Version)); return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; } pHlp->pfnSSMSkip(pSSM, 19 + 5 * sizeof(bool) + 8 /* sizeof(BMDMAState) */); for (uint32_t j = 0; j < 2; j++) { pHlp->pfnSSMSkip(pSSM, 88 + 5 * sizeof(bool) ); if (u32Version > ATA_CTL_SAVED_STATE_VERSION_WITHOUT_FULL_SENSE) pHlp->pfnSSMSkip(pSSM, 64); else pHlp->pfnSSMSkip(pSSM, 2); /** @todo triple-check this hack after passthrough is working */ pHlp->pfnSSMSkip(pSSM, 1); if (u32Version > ATA_CTL_SAVED_STATE_VERSION_WITHOUT_EVENT_STATUS) pHlp->pfnSSMSkip(pSSM, 4); pHlp->pfnSSMSkip(pSSM, sizeof(PDMLED)); pHlp->pfnSSMGetU32(pSSM, &u32IOBuffer); if (u32IOBuffer) pHlp->pfnSSMSkip(pSSM, u32IOBuffer); } rc = pHlp->pfnSSMGetU32(pSSM, &u32); if (RT_FAILURE(rc)) return rc; if (u32 != ~0U) { AssertMsgFailed(("u32=%#x expected ~0\n", u32)); rc = VERR_SSM_DATA_UNIT_FORMAT_CHANGED; return rc; } return VINF_SUCCESS; } /** * @callback_method_impl{FNSSMDEVLOADEXEC} */ static DECLCALLBACK(int) ahciR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; uint32_t u32; int rc; if ( uVersion > AHCI_SAVED_STATE_VERSION || uVersion < AHCI_SAVED_STATE_VERSION_VBOX_30) return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; /* Deal with the priod after removing the saved IDE bits where the saved state version remained unchanged. */ if ( uVersion == AHCI_SAVED_STATE_VERSION_IDE_EMULATION && pHlp->pfnSSMHandleRevision(pSSM) >= 79045 && pHlp->pfnSSMHandleRevision(pSSM) < 79201) uVersion++; /* * Check whether we have to resort to the legacy port reset method to * prevent older BIOS versions from failing after a reset. */ if (uVersion <= AHCI_SAVED_STATE_VERSION_PRE_PORT_RESET_CHANGES) pThis->fLegacyPortResetMethod = true; /* Verify config. */ if (uVersion > AHCI_SAVED_STATE_VERSION_VBOX_30) { rc = pHlp->pfnSSMGetU32(pSSM, &u32); AssertRCReturn(rc, rc); if (u32 != pThis->cPortsImpl) { LogRel(("AHCI: Config mismatch: cPortsImpl - saved=%u config=%u\n", u32, pThis->cPortsImpl)); if ( u32 < pThis->cPortsImpl || u32 > AHCI_MAX_NR_PORTS_IMPL) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("Config mismatch: cPortsImpl - saved=%u config=%u"), u32, pThis->cPortsImpl); } for (uint32_t i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { bool fInUse; rc = pHlp->pfnSSMGetBool(pSSM, &fInUse); AssertRCReturn(rc, rc); if (fInUse != pThis->aPorts[i].fPresent) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("The %s VM is missing a device on port %u. Please make sure the source and target VMs have compatible storage configurations"), fInUse ? "target" : "source", i); if (uVersion > AHCI_SAVED_STATE_VERSION_PRE_HOTPLUG_FLAG) { bool fHotpluggable; rc = pHlp->pfnSSMGetBool(pSSM, &fHotpluggable); AssertRCReturn(rc, rc); if (fHotpluggable != pThis->aPorts[i].fHotpluggable) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("AHCI: Port %u config mismatch: Hotplug flag - saved=%RTbool config=%RTbool\n"), i, fHotpluggable, pThis->aPorts[i].fHotpluggable); } else Assert(pThis->aPorts[i].fHotpluggable); char szSerialNumber[AHCI_SERIAL_NUMBER_LENGTH+1]; rc = pHlp->pfnSSMGetStrZ(pSSM, szSerialNumber, sizeof(szSerialNumber)); AssertRCReturn(rc, rc); if (strcmp(szSerialNumber, pThis->aPorts[i].szSerialNumber)) LogRel(("AHCI: Port %u config mismatch: Serial number - saved='%s' config='%s'\n", i, szSerialNumber, pThis->aPorts[i].szSerialNumber)); char szFirmwareRevision[AHCI_FIRMWARE_REVISION_LENGTH+1]; rc = pHlp->pfnSSMGetStrZ(pSSM, szFirmwareRevision, sizeof(szFirmwareRevision)); AssertRCReturn(rc, rc); if (strcmp(szFirmwareRevision, pThis->aPorts[i].szFirmwareRevision)) LogRel(("AHCI: Port %u config mismatch: Firmware revision - saved='%s' config='%s'\n", i, szFirmwareRevision, pThis->aPorts[i].szFirmwareRevision)); char szModelNumber[AHCI_MODEL_NUMBER_LENGTH+1]; rc = pHlp->pfnSSMGetStrZ(pSSM, szModelNumber, sizeof(szModelNumber)); AssertRCReturn(rc, rc); if (strcmp(szModelNumber, pThis->aPorts[i].szModelNumber)) LogRel(("AHCI: Port %u config mismatch: Model number - saved='%s' config='%s'\n", i, szModelNumber, pThis->aPorts[i].szModelNumber)); } static const char *s_apszIdeEmuPortNames[4] = { "PrimaryMaster", "PrimarySlave", "SecondaryMaster", "SecondarySlave" }; for (uint32_t i = 0; i < RT_ELEMENTS(s_apszIdeEmuPortNames); i++) { uint32_t iPort; rc = pHlp->pfnCFGMQueryU32Def(pDevIns->pCfg, s_apszIdeEmuPortNames[i], &iPort, i); AssertRCReturn(rc, rc); uint32_t iPortSaved; rc = pHlp->pfnSSMGetU32(pSSM, &iPortSaved); AssertRCReturn(rc, rc); if (iPortSaved != iPort) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("IDE %s config mismatch: saved=%u config=%u"), s_apszIdeEmuPortNames[i], iPortSaved, iPort); } } if (uPass == SSM_PASS_FINAL) { /* Restore data. */ /* The main device structure. */ pHlp->pfnSSMGetU32(pSSM, &pThis->regHbaCap); pHlp->pfnSSMGetU32(pSSM, &pThis->regHbaCtrl); pHlp->pfnSSMGetU32(pSSM, &pThis->regHbaIs); pHlp->pfnSSMGetU32(pSSM, &pThis->regHbaPi); pHlp->pfnSSMGetU32(pSSM, &pThis->regHbaVs); pHlp->pfnSSMGetU32(pSSM, &pThis->regHbaCccCtl); pHlp->pfnSSMGetU32(pSSM, &pThis->regHbaCccPorts); pHlp->pfnSSMGetU8(pSSM, &pThis->uCccPortNr); pHlp->pfnSSMGetU64(pSSM, &pThis->uCccTimeout); pHlp->pfnSSMGetU32(pSSM, &pThis->uCccNr); pHlp->pfnSSMGetU32(pSSM, &pThis->uCccCurrentNr); pHlp->pfnSSMGetU32V(pSSM, &pThis->u32PortsInterrupted); pHlp->pfnSSMGetBool(pSSM, &pThis->fReset); pHlp->pfnSSMGetBool(pSSM, &pThis->f64BitAddr); bool fIgn; pHlp->pfnSSMGetBool(pSSM, &fIgn); /* Was fR0Enabled, which should never have been saved! */ pHlp->pfnSSMGetBool(pSSM, &fIgn); /* Was fGCEnabled, which should never have been saved! */ if (uVersion > AHCI_SAVED_STATE_VERSION_PRE_PORT_RESET_CHANGES) pHlp->pfnSSMGetBool(pSSM, &pThis->fLegacyPortResetMethod); /* Now every port. */ for (uint32_t i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { PAHCIPORT pAhciPort = &pThis->aPorts[i]; pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regCLB); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regCLBU); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regFB); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regFBU); pHlp->pfnSSMGetGCPhysV(pSSM, &pThis->aPorts[i].GCPhysAddrClb); pHlp->pfnSSMGetGCPhysV(pSSM, &pThis->aPorts[i].GCPhysAddrFb); pHlp->pfnSSMGetU32V(pSSM, &pThis->aPorts[i].regIS); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regIE); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regCMD); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regTFD); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regSIG); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regSSTS); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regSCTL); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].regSERR); pHlp->pfnSSMGetU32V(pSSM, &pThis->aPorts[i].regSACT); pHlp->pfnSSMGetU32V(pSSM, &pThis->aPorts[i].regCI); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].PCHSGeometry.cCylinders); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].PCHSGeometry.cHeads); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].PCHSGeometry.cSectors); pHlp->pfnSSMGetU64(pSSM, &pThis->aPorts[i].cTotalSectors); pHlp->pfnSSMGetU32(pSSM, &pThis->aPorts[i].cMultSectors); pHlp->pfnSSMGetU8(pSSM, &pThis->aPorts[i].uATATransferMode); pHlp->pfnSSMGetBool(pSSM, &pThis->aPorts[i].fResetDevice); if (uVersion <= AHCI_SAVED_STATE_VERSION_VBOX_30) pHlp->pfnSSMSkip(pSSM, AHCI_NR_COMMAND_SLOTS * sizeof(uint8_t)); /* no active data here */ if (uVersion < AHCI_SAVED_STATE_VERSION_IDE_EMULATION) { /* The old positions in the FIFO, not required. */ pHlp->pfnSSMSkip(pSSM, 2*sizeof(uint8_t)); } pHlp->pfnSSMGetBool(pSSM, &pThis->aPorts[i].fPoweredOn); pHlp->pfnSSMGetBool(pSSM, &pThis->aPorts[i].fSpunUp); pHlp->pfnSSMGetU32V(pSSM, &pThis->aPorts[i].u32TasksFinished); pHlp->pfnSSMGetU32V(pSSM, &pThis->aPorts[i].u32QueuedTasksFinished); if (uVersion >= AHCI_SAVED_STATE_VERSION_IDE_EMULATION) pHlp->pfnSSMGetU32V(pSSM, &pThis->aPorts[i].u32CurrentCommandSlot); if (uVersion > AHCI_SAVED_STATE_VERSION_PRE_ATAPI) { pHlp->pfnSSMGetBool(pSSM, &pThis->aPorts[i].fATAPI); pHlp->pfnSSMGetMem(pSSM, pThis->aPorts[i].abATAPISense, sizeof(pThis->aPorts[i].abATAPISense)); if (uVersion <= AHCI_SAVED_STATE_VERSION_PRE_ATAPI_REMOVE) { pHlp->pfnSSMSkip(pSSM, 1); /* cNotifiedMediaChange. */ pHlp->pfnSSMSkip(pSSM, 4); /* MediaEventStatus */ } } else if (pThis->aPorts[i].fATAPI) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("Config mismatch: atapi - saved=false config=true")); /* Check if we have tasks pending. */ uint32_t fTasksOutstanding = pAhciPort->regCI & ~pAhciPort->u32TasksFinished; uint32_t fQueuedTasksOutstanding = pAhciPort->regSACT & ~pAhciPort->u32QueuedTasksFinished; pAhciPort->u32TasksNew = fTasksOutstanding | fQueuedTasksOutstanding; if (pAhciPort->u32TasksNew) { /* * There are tasks pending. The VM was saved after a task failed * because of non-fatal error. Set the redo flag. */ pAhciPort->fRedo = true; } } if (uVersion <= AHCI_SAVED_STATE_VERSION_IDE_EMULATION) { for (uint32_t i = 0; i < 2; i++) { rc = ahciR3LoadLegacyEmulationState(pHlp, pSSM); if(RT_FAILURE(rc)) return rc; } } rc = pHlp->pfnSSMGetU32(pSSM, &u32); if (RT_FAILURE(rc)) return rc; AssertMsgReturn(u32 == UINT32_MAX, ("%#x\n", u32), VERR_SSM_DATA_UNIT_FORMAT_CHANGED); } return VINF_SUCCESS; } /* -=-=-=-=- device PDM interface -=-=-=-=- */ /** * Configure the attached device for a port. * * Used by ahciR3Construct and ahciR3Attach. * * @returns VBox status code * @param pDevIns The device instance data. * @param pAhciPort The port for which the device is to be configured, shared bits. * @param pAhciPortR3 The port for which the device is to be configured, ring-3 bits. */ static int ahciR3ConfigureLUN(PPDMDEVINS pDevIns, PAHCIPORT pAhciPort, PAHCIPORTR3 pAhciPortR3) { /* Query the media interface. */ pAhciPortR3->pDrvMedia = PDMIBASE_QUERY_INTERFACE(pAhciPortR3->pDrvBase, PDMIMEDIA); AssertMsgReturn(RT_VALID_PTR(pAhciPortR3->pDrvMedia), ("AHCI configuration error: LUN#%d misses the basic media interface!\n", pAhciPort->iLUN), VERR_PDM_MISSING_INTERFACE); /* Get the extended media interface. */ pAhciPortR3->pDrvMediaEx = PDMIBASE_QUERY_INTERFACE(pAhciPortR3->pDrvBase, PDMIMEDIAEX); AssertMsgReturn(RT_VALID_PTR(pAhciPortR3->pDrvMediaEx), ("AHCI configuration error: LUN#%d misses the extended media interface!\n", pAhciPort->iLUN), VERR_PDM_MISSING_INTERFACE); /* * Validate type. */ PDMMEDIATYPE enmType = pAhciPortR3->pDrvMedia->pfnGetType(pAhciPortR3->pDrvMedia); AssertMsgReturn(enmType == PDMMEDIATYPE_HARD_DISK || enmType == PDMMEDIATYPE_CDROM || enmType == PDMMEDIATYPE_DVD, ("AHCI configuration error: LUN#%d isn't a disk or cd/dvd. enmType=%u\n", pAhciPort->iLUN, enmType), VERR_PDM_UNSUPPORTED_BLOCK_TYPE); int rc = pAhciPortR3->pDrvMediaEx->pfnIoReqAllocSizeSet(pAhciPortR3->pDrvMediaEx, sizeof(AHCIREQ)); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("AHCI configuration error: LUN#%u: Failed to set I/O request size!"), pAhciPort->iLUN); uint32_t fFeatures = 0; rc = pAhciPortR3->pDrvMediaEx->pfnQueryFeatures(pAhciPortR3->pDrvMediaEx, &fFeatures); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("AHCI configuration error: LUN#%u: Failed to query features of device"), pAhciPort->iLUN); if (fFeatures & PDMIMEDIAEX_FEATURE_F_DISCARD) pAhciPort->fTrimEnabled = true; pAhciPort->fPresent = true; pAhciPort->fATAPI = (enmType == PDMMEDIATYPE_CDROM || enmType == PDMMEDIATYPE_DVD) && RT_BOOL(fFeatures & PDMIMEDIAEX_FEATURE_F_RAWSCSICMD); if (pAhciPort->fATAPI) { pAhciPort->PCHSGeometry.cCylinders = 0; pAhciPort->PCHSGeometry.cHeads = 0; pAhciPort->PCHSGeometry.cSectors = 0; LogRel(("AHCI: LUN#%d: CD/DVD\n", pAhciPort->iLUN)); } else { pAhciPort->cbSector = pAhciPortR3->pDrvMedia->pfnGetSectorSize(pAhciPortR3->pDrvMedia); pAhciPort->cTotalSectors = pAhciPortR3->pDrvMedia->pfnGetSize(pAhciPortR3->pDrvMedia) / pAhciPort->cbSector; rc = pAhciPortR3->pDrvMedia->pfnBiosGetPCHSGeometry(pAhciPortR3->pDrvMedia, &pAhciPort->PCHSGeometry); if (rc == VERR_PDM_MEDIA_NOT_MOUNTED) { pAhciPort->PCHSGeometry.cCylinders = 0; pAhciPort->PCHSGeometry.cHeads = 16; /*??*/ pAhciPort->PCHSGeometry.cSectors = 63; /*??*/ } else if (rc == VERR_PDM_GEOMETRY_NOT_SET) { pAhciPort->PCHSGeometry.cCylinders = 0; /* autodetect marker */ rc = VINF_SUCCESS; } AssertRC(rc); if ( pAhciPort->PCHSGeometry.cCylinders == 0 || pAhciPort->PCHSGeometry.cHeads == 0 || pAhciPort->PCHSGeometry.cSectors == 0) { uint64_t cCylinders = pAhciPort->cTotalSectors / (16 * 63); pAhciPort->PCHSGeometry.cCylinders = RT_MAX(RT_MIN(cCylinders, 16383), 1); pAhciPort->PCHSGeometry.cHeads = 16; pAhciPort->PCHSGeometry.cSectors = 63; /* Set the disk geometry information. Ignore errors. */ pAhciPortR3->pDrvMedia->pfnBiosSetPCHSGeometry(pAhciPortR3->pDrvMedia, &pAhciPort->PCHSGeometry); rc = VINF_SUCCESS; } LogRel(("AHCI: LUN#%d: disk, PCHS=%u/%u/%u, total number of sectors %Ld\n", pAhciPort->iLUN, pAhciPort->PCHSGeometry.cCylinders, pAhciPort->PCHSGeometry.cHeads, pAhciPort->PCHSGeometry.cSectors, pAhciPort->cTotalSectors)); if (pAhciPort->fTrimEnabled) LogRel(("AHCI: LUN#%d: Enabled TRIM support\n", pAhciPort->iLUN)); } return rc; } /** * Callback employed by ahciR3Suspend and ahciR3PowerOff. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) ahciR3IsAsyncSuspendOrPowerOffDone(PPDMDEVINS pDevIns) { if (!ahciR3AllAsyncIOIsFinished(pDevIns)) return false; PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); ASMAtomicWriteBool(&pThisCC->fSignalIdle, false); return true; } /** * Common worker for ahciR3Suspend and ahciR3PowerOff. */ static void ahciR3SuspendOrPowerOff(PPDMDEVINS pDevIns) { PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); ASMAtomicWriteBool(&pThisCC->fSignalIdle, true); if (!ahciR3AllAsyncIOIsFinished(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, ahciR3IsAsyncSuspendOrPowerOffDone); else ASMAtomicWriteBool(&pThisCC->fSignalIdle, false); for (uint32_t i = 0; i < RT_ELEMENTS(pThisCC->aPorts); i++) { PAHCIPORTR3 pThisPort = &pThisCC->aPorts[i]; if (pThisPort->pDrvMediaEx) pThisPort->pDrvMediaEx->pfnNotifySuspend(pThisPort->pDrvMediaEx); } } /** * Suspend notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ahciR3Suspend(PPDMDEVINS pDevIns) { Log(("ahciR3Suspend\n")); ahciR3SuspendOrPowerOff(pDevIns); } /** * Resume notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ahciR3Resume(PPDMDEVINS pDevIns) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); /* * Check if one of the ports has pending tasks. * Queue a notification item again in this case. */ for (unsigned i = 0; i < RT_ELEMENTS(pThis->aPorts); i++) { PAHCIPORT pAhciPort = &pThis->aPorts[i]; if (pAhciPort->u32TasksRedo) { pAhciPort->u32TasksNew |= pAhciPort->u32TasksRedo; pAhciPort->u32TasksRedo = 0; Assert(pAhciPort->fRedo); pAhciPort->fRedo = false; /* Notify the async IO thread. */ int rc = PDMDevHlpSUPSemEventSignal(pDevIns, pAhciPort->hEvtProcess); AssertRC(rc); } } Log(("%s:\n", __FUNCTION__)); } /** * Initializes the VPD data of a attached device. * * @returns VBox status code. * @param pDevIns The device instance. * @param pAhciPort The attached device, shared bits. * @param pAhciPortR3 The attached device, ring-3 bits. * @param pszName Name of the port to get the CFGM node. */ static int ahciR3VpdInit(PPDMDEVINS pDevIns, PAHCIPORT pAhciPort, PAHCIPORTR3 pAhciPortR3, const char *pszName) { PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; /* Generate a default serial number. */ char szSerial[AHCI_SERIAL_NUMBER_LENGTH+1]; RTUUID Uuid; int rc = VINF_SUCCESS; if (pAhciPortR3->pDrvMedia) rc = pAhciPortR3->pDrvMedia->pfnGetUuid(pAhciPortR3->pDrvMedia, &Uuid); else RTUuidClear(&Uuid); if (RT_FAILURE(rc) || RTUuidIsNull(&Uuid)) { /* Generate a predictable serial for drives which don't have a UUID. */ RTStrPrintf(szSerial, sizeof(szSerial), "VB%x-1a2b3c4d", pAhciPort->iLUN); } else RTStrPrintf(szSerial, sizeof(szSerial), "VB%08x-%08x", Uuid.au32[0], Uuid.au32[3]); /* Get user config if present using defaults otherwise. */ PCFGMNODE pCfgNode = pHlp->pfnCFGMGetChild(pDevIns->pCfg, pszName); rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "SerialNumber", pAhciPort->szSerialNumber, sizeof(pAhciPort->szSerialNumber), szSerial); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("AHCI configuration error: \"SerialNumber\" is longer than 20 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"SerialNumber\" as string")); } rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "FirmwareRevision", pAhciPort->szFirmwareRevision, sizeof(pAhciPort->szFirmwareRevision), "1.0"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("AHCI configuration error: \"FirmwareRevision\" is longer than 8 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"FirmwareRevision\" as string")); } rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "ModelNumber", pAhciPort->szModelNumber, sizeof(pAhciPort->szModelNumber), pAhciPort->fATAPI ? "VBOX CD-ROM" : "VBOX HARDDISK"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("AHCI configuration error: \"ModelNumber\" is longer than 40 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"ModelNumber\" as string")); } rc = pHlp->pfnCFGMQueryU8Def(pCfgNode, "LogicalSectorsPerPhysical", &pAhciPort->cLogSectorsPerPhysicalExp, 0); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"LogicalSectorsPerPhysical\" as integer")); if (pAhciPort->cLogSectorsPerPhysicalExp >= 16) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: \"LogicalSectorsPerPhysical\" must be between 0 and 15")); /* There are three other identification strings for CD drives used for INQUIRY */ if (pAhciPort->fATAPI) { rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "ATAPIVendorId", pAhciPort->szInquiryVendorId, sizeof(pAhciPort->szInquiryVendorId), "VBOX"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("AHCI configuration error: \"ATAPIVendorId\" is longer than 16 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"ATAPIVendorId\" as string")); } rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "ATAPIProductId", pAhciPort->szInquiryProductId, sizeof(pAhciPort->szInquiryProductId), "CD-ROM"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("AHCI configuration error: \"ATAPIProductId\" is longer than 16 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"ATAPIProductId\" as string")); } rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "ATAPIRevision", pAhciPort->szInquiryRevision, sizeof(pAhciPort->szInquiryRevision), "1.0"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("AHCI configuration error: \"ATAPIRevision\" is longer than 4 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"ATAPIRevision\" as string")); } } return rc; } /** * Detach notification. * * One harddisk at one port has been unplugged. * The VM is suspended at this point. * * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(void) ahciR3Detach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); int rc = VINF_SUCCESS; Log(("%s:\n", __FUNCTION__)); AssertMsgReturnVoid(iLUN < RT_MIN(pThis->cPortsImpl, RT_ELEMENTS(pThisCC->aPorts)), ("iLUN=%u", iLUN)); PAHCIPORT pAhciPort = &pThis->aPorts[iLUN]; PAHCIPORTR3 pAhciPortR3 = &pThisCC->aPorts[iLUN]; AssertMsgReturnVoid( pAhciPort->fHotpluggable || (fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG), ("AHCI: Port %d is not marked hotpluggable\n", pAhciPort->iLUN)); if (pAhciPortR3->pAsyncIOThread) { int rcThread; /* Destroy the thread. */ rc = PDMDevHlpThreadDestroy(pDevIns, pAhciPortR3->pAsyncIOThread, &rcThread); if (RT_FAILURE(rc) || RT_FAILURE(rcThread)) AssertMsgFailed(("%s Failed to destroy async IO thread rc=%Rrc rcThread=%Rrc\n", __FUNCTION__, rc, rcThread)); pAhciPortR3->pAsyncIOThread = NULL; pAhciPort->fWrkThreadSleeping = true; } if (!(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG)) { /* * Inform the guest about the removed device. */ pAhciPort->regSSTS = 0; pAhciPort->regSIG = 0; /* * Clear CR bit too to prevent submission of new commands when CI is written * (AHCI Spec 1.2: 7.4 Interaction of the Command List and Port Change Status). */ ASMAtomicAndU32(&pAhciPort->regCMD, ~(AHCI_PORT_CMD_CPS | AHCI_PORT_CMD_CR)); ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_CPDS | AHCI_PORT_IS_PRCS | AHCI_PORT_IS_PCS); ASMAtomicOrU32(&pAhciPort->regSERR, AHCI_PORT_SERR_X | AHCI_PORT_SERR_N); if (pAhciPort->regIE & (AHCI_PORT_IE_CPDE | AHCI_PORT_IE_PCE | AHCI_PORT_IE_PRCE)) ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VERR_IGNORED); } /* * Zero some important members. */ pAhciPortR3->pDrvBase = NULL; pAhciPortR3->pDrvMedia = NULL; pAhciPortR3->pDrvMediaEx = NULL; pAhciPort->fPresent = false; } /** * Attach command. * * This is called when we change block driver for one port. * The VM is suspended at this point. * * @returns VBox status code. * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(int) ahciR3Attach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); int rc; Log(("%s:\n", __FUNCTION__)); /* the usual paranoia */ AssertMsgReturn(iLUN < RT_MIN(pThis->cPortsImpl, RT_ELEMENTS(pThisCC->aPorts)), ("iLUN=%u", iLUN), VERR_PDM_LUN_NOT_FOUND); PAHCIPORT pAhciPort = &pThis->aPorts[iLUN]; PAHCIPORTR3 pAhciPortR3 = &pThisCC->aPorts[iLUN]; AssertRelease(!pAhciPortR3->pDrvBase); AssertRelease(!pAhciPortR3->pDrvMedia); AssertRelease(!pAhciPortR3->pDrvMediaEx); Assert(pAhciPort->iLUN == iLUN); Assert(pAhciPortR3->iLUN == iLUN); AssertMsgReturn( pAhciPort->fHotpluggable || (fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG), ("AHCI: Port %d is not marked hotpluggable\n", pAhciPort->iLUN), VERR_INVALID_PARAMETER); /* * Try attach the block device and get the interfaces, * required as well as optional. */ rc = PDMDevHlpDriverAttach(pDevIns, pAhciPort->iLUN, &pAhciPortR3->IBase, &pAhciPortR3->pDrvBase, pAhciPortR3->szDesc); if (RT_SUCCESS(rc)) rc = ahciR3ConfigureLUN(pDevIns, pAhciPort, pAhciPortR3); else AssertMsgFailed(("Failed to attach LUN#%d. rc=%Rrc\n", pAhciPort->iLUN, rc)); if (RT_FAILURE(rc)) { pAhciPortR3->pDrvBase = NULL; pAhciPortR3->pDrvMedia = NULL; pAhciPortR3->pDrvMediaEx = NULL; pAhciPort->fPresent = false; } else { rc = PDMDevHlpSUPSemEventCreate(pDevIns, &pAhciPort->hEvtProcess); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("AHCI: Failed to create SUP event semaphore")); /* Create the async IO thread. */ rc = PDMDevHlpThreadCreate(pDevIns, &pAhciPortR3->pAsyncIOThread, pAhciPortR3, ahciAsyncIOLoop, ahciAsyncIOLoopWakeUp, 0, RTTHREADTYPE_IO, pAhciPortR3->szDesc); if (RT_FAILURE(rc)) return rc; /* * Init vendor product data. */ if (RT_SUCCESS(rc)) rc = ahciR3VpdInit(pDevIns, pAhciPort, pAhciPortR3, pAhciPortR3->szDesc); /* Inform the guest about the added device in case of hotplugging. */ if ( RT_SUCCESS(rc) && !(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG)) { AssertMsgReturn(pAhciPort->fHotpluggable, ("AHCI: Port %d is not marked hotpluggable\n", pAhciPort->iLUN), VERR_NOT_SUPPORTED); /* * Initialize registers */ ASMAtomicOrU32(&pAhciPort->regCMD, AHCI_PORT_CMD_CPS); ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_CPDS | AHCI_PORT_IS_PRCS | AHCI_PORT_IS_PCS); ASMAtomicOrU32(&pAhciPort->regSERR, AHCI_PORT_SERR_X | AHCI_PORT_SERR_N); if (pAhciPort->fATAPI) pAhciPort->regSIG = AHCI_PORT_SIG_ATAPI; else pAhciPort->regSIG = AHCI_PORT_SIG_DISK; pAhciPort->regSSTS = (0x01 << 8) | /* Interface is active. */ (0x02 << 4) | /* Generation 2 (3.0GBps) speed. */ (0x03 << 0); /* Device detected and communication established. */ if ( (pAhciPort->regIE & AHCI_PORT_IE_CPDE) || (pAhciPort->regIE & AHCI_PORT_IE_PCE) || (pAhciPort->regIE & AHCI_PORT_IE_PRCE)) ahciHbaSetInterrupt(pDevIns, pThis, pAhciPort->iLUN, VERR_IGNORED); } } return rc; } /** * Common reset worker. * * @param pDevIns The device instance data. */ static int ahciR3ResetCommon(PPDMDEVINS pDevIns) { PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); ahciR3HBAReset(pDevIns, pThis, pThisCC); /* Hardware reset for the ports. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aPorts); i++) ahciPortHwReset(&pThis->aPorts[i]); return VINF_SUCCESS; } /** * Callback employed by ahciR3Reset. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) ahciR3IsAsyncResetDone(PPDMDEVINS pDevIns) { PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); if (!ahciR3AllAsyncIOIsFinished(pDevIns)) return false; ASMAtomicWriteBool(&pThisCC->fSignalIdle, false); ahciR3ResetCommon(pDevIns); return true; } /** * Reset notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ahciR3Reset(PPDMDEVINS pDevIns) { PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); ASMAtomicWriteBool(&pThisCC->fSignalIdle, true); if (!ahciR3AllAsyncIOIsFinished(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, ahciR3IsAsyncResetDone); else { ASMAtomicWriteBool(&pThisCC->fSignalIdle, false); ahciR3ResetCommon(pDevIns); } } /** * Poweroff notification. * * @param pDevIns Pointer to the device instance */ static DECLCALLBACK(void) ahciR3PowerOff(PPDMDEVINS pDevIns) { Log(("achiR3PowerOff\n")); ahciR3SuspendOrPowerOff(pDevIns); } /** * Destroy a driver instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @param pDevIns The device instance data. */ static DECLCALLBACK(int) ahciR3Destruct(PPDMDEVINS pDevIns) { PDMDEV_CHECK_VERSIONS_RETURN_QUIET(pDevIns); PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); int rc = VINF_SUCCESS; /* * At this point the async I/O thread is suspended and will not enter * this module again. So, no coordination is needed here and PDM * will take care of terminating and cleaning up the thread. */ if (PDMDevHlpCritSectIsInitialized(pDevIns, &pThis->lock)) { PDMDevHlpTimerDestroy(pDevIns, pThis->hHbaCccTimer); pThis->hHbaCccTimer = NIL_TMTIMERHANDLE; Log(("%s: Destruct every port\n", __FUNCTION__)); uint32_t const cPortsImpl = RT_MIN(pThis->cPortsImpl, RT_ELEMENTS(pThis->aPorts)); for (unsigned iActPort = 0; iActPort < cPortsImpl; iActPort++) { PAHCIPORT pAhciPort = &pThis->aPorts[iActPort]; if (pAhciPort->hEvtProcess != NIL_SUPSEMEVENT) { PDMDevHlpSUPSemEventClose(pDevIns, pAhciPort->hEvtProcess); pAhciPort->hEvtProcess = NIL_SUPSEMEVENT; } } PDMDevHlpCritSectDelete(pDevIns, &pThis->lock); } return rc; } /** * @interface_method_impl{PDMDEVREG,pfnConstruct} */ static DECLCALLBACK(int) ahciR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); PAHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PAHCICC); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; PPDMIBASE pBase; int rc; unsigned i; uint32_t cbTotalBufferSize = 0; /** @todo r=bird: cbTotalBufferSize isn't ever set. */ LogFlowFunc(("pThis=%#p\n", pThis)); /* * Initialize the instance data (everything touched by the destructor need * to be initialized here!). */ PPDMPCIDEV pPciDev = pDevIns->apPciDevs[0]; PDMPCIDEV_ASSERT_VALID(pDevIns, pPciDev); PDMPciDevSetVendorId(pPciDev, 0x8086); /* Intel */ PDMPciDevSetDeviceId(pPciDev, 0x2829); /* ICH-8M */ PDMPciDevSetCommand(pPciDev, 0x0000); #ifdef VBOX_WITH_MSI_DEVICES PDMPciDevSetStatus(pPciDev, VBOX_PCI_STATUS_CAP_LIST); PDMPciDevSetCapabilityList(pPciDev, 0x80); #else PDMPciDevSetCapabilityList(pPciDev, 0x70); #endif PDMPciDevSetRevisionId(pPciDev, 0x02); PDMPciDevSetClassProg(pPciDev, 0x01); PDMPciDevSetClassSub(pPciDev, 0x06); PDMPciDevSetClassBase(pPciDev, 0x01); PDMPciDevSetBaseAddress(pPciDev, 5, false, false, false, 0x00000000); PDMPciDevSetInterruptLine(pPciDev, 0x00); PDMPciDevSetInterruptPin(pPciDev, 0x01); PDMPciDevSetByte(pPciDev, 0x70, VBOX_PCI_CAP_ID_PM); /* Capability ID: PCI Power Management Interface */ PDMPciDevSetByte(pPciDev, 0x71, 0xa8); /* next */ PDMPciDevSetByte(pPciDev, 0x72, 0x03); /* version ? */ PDMPciDevSetByte(pPciDev, 0x90, 0x40); /* AHCI mode. */ PDMPciDevSetByte(pPciDev, 0x92, 0x3f); PDMPciDevSetByte(pPciDev, 0x94, 0x80); PDMPciDevSetByte(pPciDev, 0x95, 0x01); PDMPciDevSetByte(pPciDev, 0x97, 0x78); PDMPciDevSetByte(pPciDev, 0xa8, 0x12); /* SATACR capability */ PDMPciDevSetByte(pPciDev, 0xa9, 0x00); /* next */ PDMPciDevSetWord(pPciDev, 0xaa, 0x0010); /* Revision */ PDMPciDevSetDWord(pPciDev, 0xac, 0x00000028); /* SATA Capability Register 1 */ pThis->cThreadsActive = 0; pThisCC->pDevIns = pDevIns; pThisCC->IBase.pfnQueryInterface = ahciR3Status_QueryInterface; pThisCC->ILeds.pfnQueryStatusLed = ahciR3Status_QueryStatusLed; /* Initialize port members. */ for (i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { PAHCIPORT pAhciPort = &pThis->aPorts[i]; PAHCIPORTR3 pAhciPortR3 = &pThisCC->aPorts[i]; pAhciPortR3->pDevIns = pDevIns; pAhciPort->iLUN = i; pAhciPortR3->iLUN = i; pAhciPort->Led.u32Magic = PDMLED_MAGIC; pAhciPortR3->pDrvBase = NULL; pAhciPortR3->pAsyncIOThread = NULL; pAhciPort->hEvtProcess = NIL_SUPSEMEVENT; pAhciPort->fHotpluggable = true; } /* * Init locks, using explicit locking where necessary. */ rc = PDMDevHlpSetDeviceCritSect(pDevIns, PDMDevHlpCritSectGetNop(pDevIns)); AssertRCReturn(rc, rc); rc = PDMDevHlpCritSectInit(pDevIns, &pThis->lock, RT_SRC_POS, "AHCI#%u", iInstance); if (RT_FAILURE(rc)) { Log(("%s: Failed to create critical section.\n", __FUNCTION__)); return rc; } /* * Validate and read configuration. */ PDMDEV_VALIDATE_CONFIG_RETURN(pDevIns, "PrimaryMaster|PrimarySlave|SecondaryMaster" "|SecondarySlave|PortCount|Bootable|CmdSlotsAvail|TigerHack", "Port*"); rc = pHlp->pfnCFGMQueryU32Def(pCfg, "PortCount", &pThis->cPortsImpl, AHCI_MAX_NR_PORTS_IMPL); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read PortCount as integer")); Log(("%s: cPortsImpl=%u\n", __FUNCTION__, pThis->cPortsImpl)); if (pThis->cPortsImpl > AHCI_MAX_NR_PORTS_IMPL) return PDMDevHlpVMSetError(pDevIns, VERR_INVALID_PARAMETER, RT_SRC_POS, N_("AHCI configuration error: PortCount=%u should not exceed %u"), pThis->cPortsImpl, AHCI_MAX_NR_PORTS_IMPL); if (pThis->cPortsImpl < 1) return PDMDevHlpVMSetError(pDevIns, VERR_INVALID_PARAMETER, RT_SRC_POS, N_("AHCI configuration error: PortCount=%u should be at least 1"), pThis->cPortsImpl); rc = pHlp->pfnCFGMQueryBoolDef(pCfg, "Bootable", &pThis->fBootable, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read Bootable as boolean")); rc = pHlp->pfnCFGMQueryU32Def(pCfg, "CmdSlotsAvail", &pThis->cCmdSlotsAvail, AHCI_NR_COMMAND_SLOTS); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read CmdSlotsAvail as integer")); Log(("%s: cCmdSlotsAvail=%u\n", __FUNCTION__, pThis->cCmdSlotsAvail)); if (pThis->cCmdSlotsAvail > AHCI_NR_COMMAND_SLOTS) return PDMDevHlpVMSetError(pDevIns, VERR_INVALID_PARAMETER, RT_SRC_POS, N_("AHCI configuration error: CmdSlotsAvail=%u should not exceed %u"), pThis->cPortsImpl, AHCI_NR_COMMAND_SLOTS); if (pThis->cCmdSlotsAvail < 1) return PDMDevHlpVMSetError(pDevIns, VERR_INVALID_PARAMETER, RT_SRC_POS, N_("AHCI configuration error: CmdSlotsAvail=%u should be at least 1"), pThis->cCmdSlotsAvail); bool fTigerHack; rc = pHlp->pfnCFGMQueryBoolDef(pCfg, "TigerHack", &fTigerHack, false); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read TigerHack as boolean")); /* * Register the PCI device, it's I/O regions. */ rc = PDMDevHlpPCIRegister(pDevIns, pPciDev); if (RT_FAILURE(rc)) return rc; #ifdef VBOX_WITH_MSI_DEVICES PDMMSIREG MsiReg; RT_ZERO(MsiReg); MsiReg.cMsiVectors = 1; MsiReg.iMsiCapOffset = 0x80; MsiReg.iMsiNextOffset = 0x70; rc = PDMDevHlpPCIRegisterMsi(pDevIns, &MsiReg); if (RT_FAILURE(rc)) { PCIDevSetCapabilityList(pPciDev, 0x70); /* That's OK, we can work without MSI */ } #endif /* * Solaris 10 U5 fails to map the AHCI register space when the sets (0..3) * for the legacy IDE registers are not available. We set up "fake" entries * in the PCI configuration register. That means they are available but * read and writes from/to them have no effect. No guest should access them * anyway because the controller is marked as AHCI in the Programming * interface and we don't have an option to change to IDE emulation (real * hardware provides an option in the BIOS to switch to it which also changes * device Id and other things in the PCI configuration space). */ rc = PDMDevHlpPCIIORegionCreateIo(pDevIns, 0 /*iPciRegion*/, 8 /*cPorts*/, ahciLegacyFakeWrite, ahciLegacyFakeRead, NULL /*pvUser*/, "AHCI Fake #0", NULL /*paExtDescs*/, &pThis->hIoPortsLegacyFake0); AssertRCReturn(rc, PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region"))); rc = PDMDevHlpPCIIORegionCreateIo(pDevIns, 1 /*iPciRegion*/, 1 /*cPorts*/, ahciLegacyFakeWrite, ahciLegacyFakeRead, NULL /*pvUser*/, "AHCI Fake #1", NULL /*paExtDescs*/, &pThis->hIoPortsLegacyFake1); AssertRCReturn(rc, PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region"))); rc = PDMDevHlpPCIIORegionCreateIo(pDevIns, 2 /*iPciRegion*/, 8 /*cPorts*/, ahciLegacyFakeWrite, ahciLegacyFakeRead, NULL /*pvUser*/, "AHCI Fake #2", NULL /*paExtDescs*/, &pThis->hIoPortsLegacyFake2); AssertRCReturn(rc, PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region"))); rc = PDMDevHlpPCIIORegionCreateIo(pDevIns, 3 /*iPciRegion*/, 1 /*cPorts*/, ahciLegacyFakeWrite, ahciLegacyFakeRead, NULL /*pvUser*/, "AHCI Fake #3", NULL /*paExtDescs*/, &pThis->hIoPortsLegacyFake3); AssertRCReturn(rc, PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region"))); /* * The non-fake PCI I/O regions: * Note! The 4352 byte MMIO region will be rounded up to GUEST_PAGE_SIZE. */ rc = PDMDevHlpPCIIORegionCreateIo(pDevIns, 4 /*iPciRegion*/, 0x10 /*cPorts*/, ahciIdxDataWrite, ahciIdxDataRead, NULL /*pvUser*/, "AHCI IDX/DATA", NULL /*paExtDescs*/, &pThis->hIoPortIdxData); AssertRCReturn(rc, PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region for BMDMA"))); /** @todo change this to IOMMMIO_FLAGS_WRITE_ONLY_DWORD once EM/IOM starts * handling 2nd DWORD failures on split accesses correctly. */ rc = PDMDevHlpPCIIORegionCreateMmio(pDevIns, 5 /*iPciRegion*/, 4352 /*cbRegion*/, PCI_ADDRESS_SPACE_MEM, ahciMMIOWrite, ahciMMIORead, NULL /*pvUser*/, IOMMMIO_FLAGS_READ_DWORD | IOMMMIO_FLAGS_WRITE_DWORD_QWORD_READ_MISSING, "AHCI", &pThis->hMmio); AssertRCReturn(rc, PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI memory region for registers"))); /* * Create the timer for command completion coalescing feature. */ rc = PDMDevHlpTimerCreate(pDevIns, TMCLOCK_VIRTUAL, ahciCccTimer, pThis, TMTIMER_FLAGS_NO_CRIT_SECT | TMTIMER_FLAGS_RING0, "AHCI CCC", &pThis->hHbaCccTimer); AssertRCReturn(rc, rc); /* * Initialize ports. */ /* Initialize static members on every port. */ for (i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) ahciPortHwReset(&pThis->aPorts[i]); /* Attach drivers to every available port. */ for (i = 0; i < pThis->cPortsImpl; i++) { PAHCIPORT pAhciPort = &pThis->aPorts[i]; PAHCIPORTR3 pAhciPortR3 = &pThisCC->aPorts[i]; RTStrPrintf(pAhciPortR3->szDesc, sizeof(pAhciPortR3->szDesc), "Port%u", i); /* * Init interfaces. */ pAhciPortR3->IBase.pfnQueryInterface = ahciR3PortQueryInterface; pAhciPortR3->IMediaExPort.pfnIoReqCompleteNotify = ahciR3IoReqCompleteNotify; pAhciPortR3->IMediaExPort.pfnIoReqCopyFromBuf = ahciR3IoReqCopyFromBuf; pAhciPortR3->IMediaExPort.pfnIoReqCopyToBuf = ahciR3IoReqCopyToBuf; pAhciPortR3->IMediaExPort.pfnIoReqQueryBuf = ahciR3IoReqQueryBuf; pAhciPortR3->IMediaExPort.pfnIoReqQueryDiscardRanges = ahciR3IoReqQueryDiscardRanges; pAhciPortR3->IMediaExPort.pfnIoReqStateChanged = ahciR3IoReqStateChanged; pAhciPortR3->IMediaExPort.pfnMediumEjected = ahciR3MediumEjected; pAhciPortR3->IPort.pfnQueryDeviceLocation = ahciR3PortQueryDeviceLocation; pAhciPortR3->IPort.pfnQueryScsiInqStrings = ahciR3PortQueryScsiInqStrings; pAhciPort->fWrkThreadSleeping = true; /* Query per port configuration options if available. */ PCFGMNODE pCfgPort = pHlp->pfnCFGMGetChild(pDevIns->pCfg, pAhciPortR3->szDesc); if (pCfgPort) { rc = pHlp->pfnCFGMQueryBoolDef(pCfgPort, "Hotpluggable", &pAhciPort->fHotpluggable, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read Hotpluggable as boolean")); } /* * Attach the block driver */ rc = PDMDevHlpDriverAttach(pDevIns, pAhciPort->iLUN, &pAhciPortR3->IBase, &pAhciPortR3->pDrvBase, pAhciPortR3->szDesc); if (RT_SUCCESS(rc)) { rc = ahciR3ConfigureLUN(pDevIns, pAhciPort, pAhciPortR3); if (RT_FAILURE(rc)) { Log(("%s: Failed to configure the %s.\n", __FUNCTION__, pAhciPortR3->szDesc)); return rc; } /* Mark that a device is present on that port */ if (i < 6) pPciDev->abConfig[0x93] |= (1 << i); /* * Init vendor product data. */ rc = ahciR3VpdInit(pDevIns, pAhciPort, pAhciPortR3, pAhciPortR3->szDesc); if (RT_FAILURE(rc)) return rc; rc = PDMDevHlpSUPSemEventCreate(pDevIns, &pAhciPort->hEvtProcess); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("AHCI: Failed to create SUP event semaphore")); rc = PDMDevHlpThreadCreate(pDevIns, &pAhciPortR3->pAsyncIOThread, pAhciPortR3, ahciAsyncIOLoop, ahciAsyncIOLoopWakeUp, 0, RTTHREADTYPE_IO, pAhciPortR3->szDesc); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("AHCI: Failed to create worker thread %s"), pAhciPortR3->szDesc); } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { pAhciPortR3->pDrvBase = NULL; pAhciPort->fPresent = false; rc = VINF_SUCCESS; LogRel(("AHCI: %s: No driver attached\n", pAhciPortR3->szDesc)); } else return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("AHCI: Failed to attach drive to %s"), pAhciPortR3->szDesc); } /* * Attach status driver (optional). */ rc = PDMDevHlpDriverAttach(pDevIns, PDM_STATUS_LUN, &pThisCC->IBase, &pBase, "Status Port"); if (RT_SUCCESS(rc)) { pThisCC->pLedsConnector = PDMIBASE_QUERY_INTERFACE(pBase, PDMILEDCONNECTORS); pThisCC->pMediaNotify = PDMIBASE_QUERY_INTERFACE(pBase, PDMIMEDIANOTIFY); } else AssertMsgReturn(rc == VERR_PDM_NO_ATTACHED_DRIVER, ("Failed to attach to status driver. rc=%Rrc\n", rc), PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot attach to status driver"))); /* * Saved state. */ rc = PDMDevHlpSSMRegisterEx(pDevIns, AHCI_SAVED_STATE_VERSION, sizeof(*pThis) + cbTotalBufferSize, NULL, NULL, ahciR3LiveExec, NULL, ahciR3SavePrep, ahciR3SaveExec, NULL, ahciR3LoadPrep, ahciR3LoadExec, NULL); if (RT_FAILURE(rc)) return rc; /* * Register the info item. */ char szTmp[128]; RTStrPrintf(szTmp, sizeof(szTmp), "%s%d", pDevIns->pReg->szName, pDevIns->iInstance); PDMDevHlpDBGFInfoRegister(pDevIns, szTmp, "AHCI info", ahciR3Info); return ahciR3ResetCommon(pDevIns); } #else /* !IN_RING3 */ /** * @callback_method_impl{PDMDEVREGR0,pfnConstruct} */ static DECLCALLBACK(int) ahciRZConstruct(PPDMDEVINS pDevIns) { PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); PAHCI pThis = PDMDEVINS_2_DATA(pDevIns, PAHCI); int rc = PDMDevHlpSetDeviceCritSect(pDevIns, PDMDevHlpCritSectGetNop(pDevIns)); AssertRCReturn(rc, rc); rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPortsLegacyFake0, ahciLegacyFakeWrite, ahciLegacyFakeRead, NULL /*pvUser*/); AssertRCReturn(rc, rc); rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPortsLegacyFake1, ahciLegacyFakeWrite, ahciLegacyFakeRead, NULL /*pvUser*/); AssertRCReturn(rc, rc); rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPortsLegacyFake2, ahciLegacyFakeWrite, ahciLegacyFakeRead, NULL /*pvUser*/); AssertRCReturn(rc, rc); rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPortsLegacyFake3, ahciLegacyFakeWrite, ahciLegacyFakeRead, NULL /*pvUser*/); AssertRCReturn(rc, rc); rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPortIdxData, ahciIdxDataWrite, ahciIdxDataRead, NULL /*pvUser*/); AssertRCReturn(rc, rc); rc = PDMDevHlpMmioSetUpContext(pDevIns, pThis->hMmio, ahciMMIOWrite, ahciMMIORead, NULL /*pvUser*/); AssertRCReturn(rc, rc); return VINF_SUCCESS; } #endif /* !IN_RING3 */ /** * The device registration structure. */ const PDMDEVREG g_DeviceAHCI = { /* .u32Version = */ PDM_DEVREG_VERSION, /* .uReserved0 = */ 0, /* .szName = */ "ahci", /* .fFlags = */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RZ | PDM_DEVREG_FLAGS_NEW_STYLE | PDM_DEVREG_FLAGS_FIRST_SUSPEND_NOTIFICATION | PDM_DEVREG_FLAGS_FIRST_POWEROFF_NOTIFICATION | PDM_DEVREG_FLAGS_FIRST_RESET_NOTIFICATION, /* .fClass = */ PDM_DEVREG_CLASS_STORAGE, /* .cMaxInstances = */ ~0U, /* .uSharedVersion = */ 42, /* .cbInstanceShared = */ sizeof(AHCI), /* .cbInstanceCC = */ sizeof(AHCICC), /* .cbInstanceRC = */ sizeof(AHCIRC), /* .cMaxPciDevices = */ 1, /* .cMaxMsixVectors = */ 0, /* .pszDescription = */ "Intel AHCI controller.\n", #if defined(IN_RING3) /* .pszRCMod = */ "VBoxDDRC.rc", /* .pszR0Mod = */ "VBoxDDR0.r0", /* .pfnConstruct = */ ahciR3Construct, /* .pfnDestruct = */ ahciR3Destruct, /* .pfnRelocate = */ NULL, /* .pfnMemSetup = */ NULL, /* .pfnPowerOn = */ NULL, /* .pfnReset = */ ahciR3Reset, /* .pfnSuspend = */ ahciR3Suspend, /* .pfnResume = */ ahciR3Resume, /* .pfnAttach = */ ahciR3Attach, /* .pfnDetach = */ ahciR3Detach, /* .pfnQueryInterface = */ NULL, /* .pfnInitComplete = */ NULL, /* .pfnPowerOff = */ ahciR3PowerOff, /* .pfnSoftReset = */ NULL, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #elif defined(IN_RING0) /* .pfnEarlyConstruct = */ NULL, /* .pfnConstruct = */ ahciRZConstruct, /* .pfnDestruct = */ NULL, /* .pfnFinalDestruct = */ NULL, /* .pfnRequest = */ NULL, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #elif defined(IN_RC) /* .pfnConstruct = */ ahciRZConstruct, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #else # error "Not in IN_RING3, IN_RING0 or IN_RC!" #endif /* .u32VersionEnd = */ PDM_DEVREG_VERSION }; #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */