/* $Id: DevATA.cpp 44516 2013-02-01 15:15:53Z vboxsync $ */ /** @file * VBox storage devices: ATA/ATAPI controller device (disk and cdrom). */ /* * Copyright (C) 2006-2013 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /******************************************************************************* * Defined Constants And Macros * *******************************************************************************/ /** Temporary instrumentation for tracking down potential virtual disk * write performance issues. */ #undef VBOX_INSTRUMENT_DMA_WRITES /** @name The SSM saved state versions. * @{ */ /** The current saved state version. */ #define ATA_SAVED_STATE_VERSION 20 /** The saved state version used by VirtualBox 3.0. * This lacks the config part and has the type at the and. */ #define ATA_SAVED_STATE_VERSION_VBOX_30 19 #define ATA_SAVED_STATE_VERSION_WITH_BOOL_TYPE 18 #define ATA_SAVED_STATE_VERSION_WITHOUT_FULL_SENSE 16 #define ATA_SAVED_STATE_VERSION_WITHOUT_EVENT_STATUS 17 /** @} */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_IDE #include #include #include #ifdef IN_RING3 # include # include # include # include # include #endif /* IN_RING3 */ #include #include #include #include #include #include #include "PIIX3ATABmDma.h" #include "ide.h" #include "ATAPIPassthrough.h" #include "VBoxDD.h" /******************************************************************************* * Defined Constants And Macros * *******************************************************************************/ /** * Maximum number of sectors to transfer in a READ/WRITE MULTIPLE request. * Set to 1 to disable multi-sector read support. According to the ATA * specification this must be a power of 2 and it must fit in an 8 bit * value. Thus the only valid values are 1, 2, 4, 8, 16, 32, 64 and 128. */ #define ATA_MAX_MULT_SECTORS 128 /** * Fastest PIO mode supported by the drive. */ #define ATA_PIO_MODE_MAX 4 /** * Fastest MDMA mode supported by the drive. */ #define ATA_MDMA_MODE_MAX 2 /** * Fastest UDMA mode supported by the drive. */ #define ATA_UDMA_MODE_MAX 6 /** ATAPI sense info size. */ #define ATAPI_SENSE_SIZE 64 /** The maximum number of release log entries per device. */ #define MAX_LOG_REL_ERRORS 1024 /* MediaEventStatus */ #define ATA_EVENT_STATUS_UNCHANGED 0 /**< medium event status not changed */ #define ATA_EVENT_STATUS_MEDIA_NEW 1 /**< new medium inserted */ #define ATA_EVENT_STATUS_MEDIA_REMOVED 2 /**< medium removed */ #define ATA_EVENT_STATUS_MEDIA_CHANGED 3 /**< medium was removed + new medium was inserted */ #define ATA_EVENT_STATUS_MEDIA_EJECT_REQUESTED 4 /**< medium eject requested (eject button pressed) */ /* Media track type */ #define ATA_MEDIA_TYPE_UNKNOWN 0 /**< unknown CD type */ #define ATA_MEDIA_NO_DISC 0x70 /**< Door closed, no medium */ /******************************************************************************* * Structures and Typedefs * *******************************************************************************/ /** * The state of an ATA device. * * @implements PDMIBASE * @implements PDMIBLOCKPORT * @implements PDMIMOUNTNOTIFY */ typedef struct ATADevState { /** Flag indicating whether the current command uses LBA48 mode. */ bool fLBA48; /** Flag indicating whether this drive implements the ATAPI command set. */ bool fATAPI; /** Set if this interface has asserted the IRQ. */ bool fIrqPending; /** Currently configured number of sectors in a multi-sector transfer. */ uint8_t cMultSectors; /** PCHS disk geometry. */ PDMMEDIAGEOMETRY PCHSGeometry; /** Total number of sectors on this disk. */ uint64_t cTotalSectors; /** Number of sectors to transfer per IRQ. */ uint32_t cSectorsPerIRQ; /** ATA/ATAPI register 1: feature (write-only). */ uint8_t uATARegFeature; /** ATA/ATAPI register 1: feature, high order byte. */ uint8_t uATARegFeatureHOB; /** ATA/ATAPI register 1: error (read-only). */ uint8_t uATARegError; /** ATA/ATAPI register 2: sector count (read/write). */ uint8_t uATARegNSector; /** ATA/ATAPI register 2: sector count, high order byte. */ uint8_t uATARegNSectorHOB; /** ATA/ATAPI register 3: sector (read/write). */ uint8_t uATARegSector; /** ATA/ATAPI register 3: sector, high order byte. */ uint8_t uATARegSectorHOB; /** ATA/ATAPI register 4: cylinder low (read/write). */ uint8_t uATARegLCyl; /** ATA/ATAPI register 4: cylinder low, high order byte. */ uint8_t uATARegLCylHOB; /** ATA/ATAPI register 5: cylinder high (read/write). */ uint8_t uATARegHCyl; /** ATA/ATAPI register 5: cylinder high, high order byte. */ uint8_t uATARegHCylHOB; /** ATA/ATAPI register 6: select drive/head (read/write). */ uint8_t uATARegSelect; /** ATA/ATAPI register 7: status (read-only). */ uint8_t uATARegStatus; /** ATA/ATAPI register 7: command (write-only). */ uint8_t uATARegCommand; /** ATA/ATAPI drive control register (write-only). */ uint8_t uATARegDevCtl; /** Currently active transfer mode (MDMA/UDMA) and speed. */ uint8_t uATATransferMode; /** Current transfer direction. */ uint8_t uTxDir; /** Index of callback for begin transfer. */ uint8_t iBeginTransfer; /** Index of callback for source/sink of data. */ uint8_t iSourceSink; /** Flag indicating whether the current command transfers data in DMA mode. */ bool fDMA; /** Set to indicate that ATAPI transfer semantics must be used. */ bool fATAPITransfer; /** Total ATA/ATAPI transfer size, shared PIO/DMA. */ uint32_t cbTotalTransfer; /** Elementary ATA/ATAPI transfer size, shared PIO/DMA. */ uint32_t cbElementaryTransfer; /** Current read/write buffer position, shared PIO/DMA. */ uint32_t iIOBufferCur; /** First element beyond end of valid buffer content, shared PIO/DMA. */ uint32_t iIOBufferEnd; /** ATA/ATAPI current PIO read/write transfer position. Not shared with DMA for safety reasons. */ uint32_t iIOBufferPIODataStart; /** ATA/ATAPI current PIO read/write transfer end. Not shared with DMA for safety reasons. */ uint32_t iIOBufferPIODataEnd; /** ATAPI current LBA position. */ uint32_t iATAPILBA; /** ATAPI current sector size. */ uint32_t cbATAPISector; /** ATAPI current command. */ uint8_t aATAPICmd[ATAPI_PACKET_SIZE]; /** ATAPI sense data. */ uint8_t abATAPISense[ATAPI_SENSE_SIZE]; /** HACK: Countdown till we report a newly unmounted drive as mounted. */ uint8_t cNotifiedMediaChange; /** The same for GET_EVENT_STATUS for mechanism */ volatile uint32_t MediaEventStatus; /** Media type if known. */ volatile uint32_t MediaTrackType; /** The status LED state for this drive. */ PDMLED Led; /** Size of I/O buffer. */ uint32_t cbIOBuffer; /** Pointer to the I/O buffer. */ R3PTRTYPE(uint8_t *) pbIOBufferR3; /** Pointer to the I/O buffer. */ R0PTRTYPE(uint8_t *) pbIOBufferR0; /** Pointer to the I/O buffer. */ RCPTRTYPE(uint8_t *) pbIOBufferRC; RTRCPTR Aligmnent1; /**< Align the statistics at an 8-byte boundary. */ /* * No data that is part of the saved state after this point!!!!! */ /* Release statistics: number of ATA DMA commands. */ STAMCOUNTER StatATADMA; /* Release statistics: number of ATA PIO commands. */ STAMCOUNTER StatATAPIO; /* Release statistics: number of ATAPI PIO commands. */ STAMCOUNTER StatATAPIDMA; /* Release statistics: number of ATAPI PIO commands. */ STAMCOUNTER StatATAPIPIO; #ifdef VBOX_INSTRUMENT_DMA_WRITES /* Release statistics: number of DMA sector writes and the time spent. */ STAMPROFILEADV StatInstrVDWrites; #endif /** Statistics: number of read operations and the time spent reading. */ STAMPROFILEADV StatReads; /** Statistics: number of bytes read. */ STAMCOUNTER StatBytesRead; /** Statistics: number of write operations and the time spent writing. */ STAMPROFILEADV StatWrites; /** Statistics: number of bytes written. */ STAMCOUNTER StatBytesWritten; /** Statistics: number of flush operations and the time spend flushing. */ STAMPROFILE StatFlushes; /** Mark the drive as having a non-rotational medium (i.e. as a SSD). */ bool fNonRotational; /** Enable passing through commands directly to the ATAPI drive. */ bool fATAPIPassthrough; /** Flag whether to overwrite inquiry data in passthrough mode. */ bool fOverwriteInquiry; /** Number of errors we've reported to the release log. * This is to prevent flooding caused by something going horribly wrong. * this value against MAX_LOG_REL_ERRORS in places likely to cause floods * like the ones we currently seeing on the linux smoke tests (2006-11-10). */ uint32_t cErrors; /** Timestamp of last started command. 0 if no command pending. */ uint64_t u64CmdTS; /** Pointer to the attached driver's base interface. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** Pointer to the attached driver's block interface. */ R3PTRTYPE(PPDMIBLOCK) pDrvBlock; /** Pointer to the attached driver's block bios interface. */ R3PTRTYPE(PPDMIBLOCKBIOS) pDrvBlockBios; /** Pointer to the attached driver's mount interface. * This is NULL if the driver isn't a removable unit. */ R3PTRTYPE(PPDMIMOUNT) pDrvMount; /** The base interface. */ PDMIBASE IBase; /** The block port interface. */ PDMIBLOCKPORT IPort; /** The mount notify interface. */ PDMIMOUNTNOTIFY IMountNotify; /** The LUN #. */ RTUINT iLUN; RTUINT Alignment2; /**< Align pDevInsR3 correctly. */ /** Pointer to device instance. */ PPDMDEVINSR3 pDevInsR3; /** Pointer to controller instance. */ R3PTRTYPE(struct ATACONTROLLER *) pControllerR3; /** Pointer to device instance. */ PPDMDEVINSR0 pDevInsR0; /** Pointer to controller instance. */ R0PTRTYPE(struct ATACONTROLLER *) pControllerR0; /** Pointer to device instance. */ PPDMDEVINSRC pDevInsRC; /** Pointer to controller instance. */ RCPTRTYPE(struct ATACONTROLLER *) pControllerRC; /** The serial number to use for IDENTIFY DEVICE commands. */ char szSerialNumber[ATA_SERIAL_NUMBER_LENGTH+1]; /** The firmware revision to use for IDENTIFY DEVICE commands. */ char szFirmwareRevision[ATA_FIRMWARE_REVISION_LENGTH+1]; /** The model number to use for IDENTIFY DEVICE commands. */ char szModelNumber[ATA_MODEL_NUMBER_LENGTH+1]; /** The vendor identification string for SCSI INQUIRY commands. */ char szInquiryVendorId[ATAPI_INQUIRY_VENDOR_ID_LENGTH+1]; /** The product identification string for SCSI INQUIRY commands. */ char szInquiryProductId[ATAPI_INQUIRY_PRODUCT_ID_LENGTH+1]; /** The revision string for SCSI INQUIRY commands. */ char szInquiryRevision[ATAPI_INQUIRY_REVISION_LENGTH+1]; /** The current tracklist of the loaded medium if passthrough is used. */ R3PTRTYPE(PTRACKLIST) pTrackList; uint8_t abAlignment4[HC_ARCH_BITS == 64 ? 7 : 3]; } ATADevState; AssertCompileMemberAlignment(ATADevState, cTotalSectors, 8); AssertCompileMemberAlignment(ATADevState, StatATADMA, 8); AssertCompileMemberAlignment(ATADevState, u64CmdTS, 8); AssertCompileMemberAlignment(ATADevState, pDevInsR3, 8); AssertCompileMemberAlignment(ATADevState, szSerialNumber, 8); AssertCompileSizeAlignment(ATADevState, 8); typedef struct ATATransferRequest { uint8_t iIf; uint8_t iBeginTransfer; uint8_t iSourceSink; uint32_t cbTotalTransfer; uint8_t uTxDir; } ATATransferRequest; typedef struct ATAAbortRequest { uint8_t iIf; bool fResetDrive; } ATAAbortRequest; typedef enum { /** Begin a new transfer. */ ATA_AIO_NEW = 0, /** Continue a DMA transfer. */ ATA_AIO_DMA, /** Continue a PIO transfer. */ ATA_AIO_PIO, /** Reset the drives on current controller, stop all transfer activity. */ ATA_AIO_RESET_ASSERTED, /** Reset the drives on current controller, resume operation. */ ATA_AIO_RESET_CLEARED, /** Abort the current transfer of a particular drive. */ ATA_AIO_ABORT } ATAAIO; typedef struct ATARequest { ATAAIO ReqType; union { ATATransferRequest t; ATAAbortRequest a; } u; } ATARequest; typedef struct ATACONTROLLER { /** The base of the first I/O Port range. */ RTIOPORT IOPortBase1; /** The base of the second I/O Port range. (0 if none) */ RTIOPORT IOPortBase2; /** The assigned IRQ. */ RTUINT irq; /** Access critical section */ PDMCRITSECT lock; /** Selected drive. */ uint8_t iSelectedIf; /** The interface on which to handle async I/O. */ uint8_t iAIOIf; /** The state of the async I/O thread. */ uint8_t uAsyncIOState; /** Flag indicating whether the next transfer is part of the current command. */ bool fChainedTransfer; /** Set when the reset processing is currently active on this controller. */ bool fReset; /** Flag whether the current transfer needs to be redone. */ bool fRedo; /** Flag whether the redo suspend has been finished. */ bool fRedoIdle; /** Flag whether the DMA operation to be redone is the final transfer. */ bool fRedoDMALastDesc; /** The BusMaster DMA state. */ BMDMAState BmDma; /** Pointer to first DMA descriptor. */ RTGCPHYS32 pFirstDMADesc; /** Pointer to last DMA descriptor. */ RTGCPHYS32 pLastDMADesc; /** Pointer to current DMA buffer (for redo operations). */ RTGCPHYS32 pRedoDMABuffer; /** Size of current DMA buffer (for redo operations). */ uint32_t cbRedoDMABuffer; /** The ATA/ATAPI interfaces of this controller. */ ATADevState aIfs[2]; /** Pointer to device instance. */ PPDMDEVINSR3 pDevInsR3; /** Pointer to device instance. */ PPDMDEVINSR0 pDevInsR0; /** Pointer to device instance. */ PPDMDEVINSRC pDevInsRC; /** Set when the destroying the device instance and the thread must exit. */ uint32_t volatile fShutdown; /** The async I/O thread handle. NIL_RTTHREAD if no thread. */ RTTHREAD AsyncIOThread; /** The event semaphore the thread is waiting on for requests. */ RTSEMEVENT AsyncIOSem; /** The request queue for the AIO thread. One element is always unused. */ ATARequest aAsyncIORequests[4]; /** The position at which to insert a new request for the AIO thread. */ volatile uint8_t AsyncIOReqHead; /** The position at which to get a new request for the AIO thread. */ volatile uint8_t AsyncIOReqTail; /** Whether to call PDMDevHlpAsyncNotificationCompleted when idle. */ bool volatile fSignalIdle; uint8_t Alignment3[1]; /**< Explicit padding of the 1 byte gap. */ /** Magic delay before triggering interrupts in DMA mode. */ uint32_t DelayIRQMillies; /** The mutex protecting the request queue. */ RTSEMMUTEX AsyncIORequestMutex; /** The event semaphore the thread is waiting on during suspended I/O. */ RTSEMEVENT SuspendIOSem; #if 0 /*HC_ARCH_BITS == 32*/ uint32_t Alignment0; #endif /** Timestamp we started the reset. */ uint64_t u64ResetTime; /* Statistics */ STAMCOUNTER StatAsyncOps; uint64_t StatAsyncMinWait; uint64_t StatAsyncMaxWait; STAMCOUNTER StatAsyncTimeUS; STAMPROFILEADV StatAsyncTime; STAMPROFILE StatLockWait; } ATACONTROLLER, *PATACONTROLLER; AssertCompileMemberAlignment(ATACONTROLLER, lock, 8); AssertCompileMemberAlignment(ATACONTROLLER, aIfs, 8); AssertCompileMemberAlignment(ATACONTROLLER, u64ResetTime, 8); AssertCompileMemberAlignment(ATACONTROLLER, StatAsyncOps, 8); typedef enum CHIPSET { /** PIIX3 chipset, must be 0 for saved state compatibility */ CHIPSET_PIIX3 = 0, /** PIIX4 chipset, must be 1 for saved state compatibility */ CHIPSET_PIIX4 = 1, /** ICH6 chipset */ CHIPSET_ICH6 = 2 } CHIPSET; /** * The state of the ATA PCI device. * * @extends PCIDEVICE * @implements PDMILEDPORTS */ typedef struct PCIATAState { PCIDEVICE dev; /** The controllers. */ ATACONTROLLER aCts[2]; /** Pointer to device instance. */ PPDMDEVINSR3 pDevIns; /** Status LUN: Base interface. */ PDMIBASE IBase; /** Status LUN: Leds interface. */ PDMILEDPORTS ILeds; /** Status LUN: Partner of ILeds. */ R3PTRTYPE(PPDMILEDCONNECTORS) pLedsConnector; /** Status LUN: Media Notify. */ R3PTRTYPE(PPDMIMEDIANOTIFY) pMediaNotify; /** Flag whether GC is enabled. */ bool fGCEnabled; /** Flag whether R0 is enabled. */ bool fR0Enabled; /** Flag indicating chipset being emulated. */ uint8_t u8Type; bool Alignment0[HC_ARCH_BITS == 64 ? 5 : 1 ]; /**< Align the struct size. */ } PCIATAState; #define PDMIBASE_2_PCIATASTATE(pInterface) ( (PCIATAState *)((uintptr_t)(pInterface) - RT_OFFSETOF(PCIATAState, IBase)) ) #define PDMILEDPORTS_2_PCIATASTATE(pInterface) ( (PCIATAState *)((uintptr_t)(pInterface) - RT_OFFSETOF(PCIATAState, ILeds)) ) #define PDMIBLOCKPORT_2_ATASTATE(pInterface) ( (ATADevState *)((uintptr_t)(pInterface) - RT_OFFSETOF(ATADevState, IPort)) ) #define PDMIMOUNT_2_ATASTATE(pInterface) ( (ATADevState *)((uintptr_t)(pInterface) - RT_OFFSETOF(ATADevState, IMount)) ) #define PDMIMOUNTNOTIFY_2_ATASTATE(pInterface) ( (ATADevState *)((uintptr_t)(pInterface) - RT_OFFSETOF(ATADevState, IMountNotify)) ) #define PCIDEV_2_PCIATASTATE(pPciDev) ( (PCIATAState *)(pPciDev) ) #define ATACONTROLLER_IDX(pController) ( (pController) - PDMINS_2_DATA(CONTROLLER_2_DEVINS(pController), PCIATAState *)->aCts ) #define ATADEVSTATE_2_CONTROLLER(pIf) ( (pIf)->CTX_SUFF(pController) ) #define ATADEVSTATE_2_DEVINS(pIf) ( (pIf)->CTX_SUFF(pDevIns) ) #define CONTROLLER_2_DEVINS(pController) ( (pController)->CTX_SUFF(pDevIns) ) #define PDMIBASE_2_ATASTATE(pInterface) ( (ATADevState *)((uintptr_t)(pInterface) - RT_OFFSETOF(ATADevState, IBase)) ) #define PDMIBLOCKPORT_2_ATASTATE(pInterface) ( (ATADevState *)((uintptr_t)(pInterface) - RT_OFFSETOF(ATADevState, IPort)) ) #ifndef VBOX_DEVICE_STRUCT_TESTCASE /******************************************************************************* * Internal Functions * ******************************************************************************/ RT_C_DECLS_BEGIN PDMBOTHCBDECL(int) ataIOPortWrite1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); PDMBOTHCBDECL(int) ataIOPortRead1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *u32, unsigned cb); PDMBOTHCBDECL(int) ataIOPortWriteStr1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrSrc, PRTGCUINTREG pcTransfer, unsigned cb); PDMBOTHCBDECL(int) ataIOPortReadStr1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrDst, PRTGCUINTREG pcTransfer, unsigned cb); PDMBOTHCBDECL(int) ataIOPortWrite2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); PDMBOTHCBDECL(int) ataIOPortRead2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *u32, unsigned cb); PDMBOTHCBDECL(int) ataBMDMAIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); PDMBOTHCBDECL(int) ataBMDMAIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); RT_C_DECLS_END DECLINLINE(void) ataSetStatusValue(ATADevState *s, uint8_t stat) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); /* Freeze status register contents while processing RESET. */ if (!pCtl->fReset) { s->uATARegStatus = stat; Log2(("%s: LUN#%d status %#04x\n", __FUNCTION__, s->iLUN, s->uATARegStatus)); } } DECLINLINE(void) ataSetStatus(ATADevState *s, uint8_t stat) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); /* Freeze status register contents while processing RESET. */ if (!pCtl->fReset) { s->uATARegStatus |= stat; Log2(("%s: LUN#%d status %#04x\n", __FUNCTION__, s->iLUN, s->uATARegStatus)); } } DECLINLINE(void) ataUnsetStatus(ATADevState *s, uint8_t stat) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); /* Freeze status register contents while processing RESET. */ if (!pCtl->fReset) { s->uATARegStatus &= ~stat; Log2(("%s: LUN#%d status %#04x\n", __FUNCTION__, s->iLUN, s->uATARegStatus)); } } #ifdef IN_RING3 typedef void (*PBeginTransferFunc)(ATADevState *); typedef bool (*PSourceSinkFunc)(ATADevState *); static void ataReadWriteSectorsBT(ATADevState *); static void ataPacketBT(ATADevState *); static void atapiCmdBT(ATADevState *); static void atapiPassthroughCmdBT(ATADevState *); static bool ataIdentifySS(ATADevState *); static bool ataFlushSS(ATADevState *); static bool ataReadSectorsSS(ATADevState *); static bool ataWriteSectorsSS(ATADevState *); static bool ataExecuteDeviceDiagnosticSS(ATADevState *); static bool ataTrimSS(ATADevState *); static bool ataPacketSS(ATADevState *); static bool atapiGetConfigurationSS(ATADevState *); static bool atapiGetEventStatusNotificationSS(ATADevState *); static bool atapiIdentifySS(ATADevState *); static bool atapiInquirySS(ATADevState *); static bool atapiMechanismStatusSS(ATADevState *); static bool atapiModeSenseErrorRecoverySS(ATADevState *); static bool atapiModeSenseCDStatusSS(ATADevState *); static bool atapiReadSS(ATADevState *); static bool atapiReadCapacitySS(ATADevState *); static bool atapiReadDiscInformationSS(ATADevState *); static bool atapiReadTOCNormalSS(ATADevState *); static bool atapiReadTOCMultiSS(ATADevState *); static bool atapiReadTOCRawSS(ATADevState *); static bool atapiReadTrackInformationSS(ATADevState *); static bool atapiRequestSenseSS(ATADevState *); static bool atapiPassthroughSS(ATADevState *); static bool atapiReadDVDStructureSS(ATADevState *); /** * Begin of transfer function indexes for g_apfnBeginTransFuncs. */ typedef enum ATAFNBT { ATAFN_BT_NULL = 0, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_BT_PACKET, ATAFN_BT_ATAPI_CMD, ATAFN_BT_ATAPI_PASSTHROUGH_CMD, ATAFN_BT_MAX } ATAFNBT; /** * Array of end transfer functions, the index is ATAFNET. * Make sure ATAFNET and this array match! */ static const PBeginTransferFunc g_apfnBeginTransFuncs[ATAFN_BT_MAX] = { NULL, ataReadWriteSectorsBT, ataPacketBT, atapiCmdBT, atapiPassthroughCmdBT, }; /** * Source/sink function indexes for g_apfnSourceSinkFuncs. */ typedef enum ATAFNSS { ATAFN_SS_NULL = 0, ATAFN_SS_IDENTIFY, ATAFN_SS_FLUSH, ATAFN_SS_READ_SECTORS, ATAFN_SS_WRITE_SECTORS, ATAFN_SS_EXECUTE_DEVICE_DIAGNOSTIC, ATAFN_SS_TRIM, ATAFN_SS_PACKET, ATAFN_SS_ATAPI_GET_CONFIGURATION, ATAFN_SS_ATAPI_GET_EVENT_STATUS_NOTIFICATION, ATAFN_SS_ATAPI_IDENTIFY, ATAFN_SS_ATAPI_INQUIRY, ATAFN_SS_ATAPI_MECHANISM_STATUS, ATAFN_SS_ATAPI_MODE_SENSE_ERROR_RECOVERY, ATAFN_SS_ATAPI_MODE_SENSE_CD_STATUS, ATAFN_SS_ATAPI_READ, ATAFN_SS_ATAPI_READ_CAPACITY, ATAFN_SS_ATAPI_READ_DISC_INFORMATION, ATAFN_SS_ATAPI_READ_TOC_NORMAL, ATAFN_SS_ATAPI_READ_TOC_MULTI, ATAFN_SS_ATAPI_READ_TOC_RAW, ATAFN_SS_ATAPI_READ_TRACK_INFORMATION, ATAFN_SS_ATAPI_REQUEST_SENSE, ATAFN_SS_ATAPI_PASSTHROUGH, ATAFN_SS_ATAPI_READ_DVD_STRUCTURE, ATAFN_SS_MAX } ATAFNSS; /** * Array of source/sink functions, the index is ATAFNSS. * Make sure ATAFNSS and this array match! */ static const PSourceSinkFunc g_apfnSourceSinkFuncs[ATAFN_SS_MAX] = { NULL, ataIdentifySS, ataFlushSS, ataReadSectorsSS, ataWriteSectorsSS, ataExecuteDeviceDiagnosticSS, ataTrimSS, ataPacketSS, atapiGetConfigurationSS, atapiGetEventStatusNotificationSS, atapiIdentifySS, atapiInquirySS, atapiMechanismStatusSS, atapiModeSenseErrorRecoverySS, atapiModeSenseCDStatusSS, atapiReadSS, atapiReadCapacitySS, atapiReadDiscInformationSS, atapiReadTOCNormalSS, atapiReadTOCMultiSS, atapiReadTOCRawSS, atapiReadTrackInformationSS, atapiRequestSenseSS, atapiPassthroughSS, atapiReadDVDStructureSS }; static const ATARequest g_ataDMARequest = { ATA_AIO_DMA, { { 0, 0, 0, 0, 0 } } }; static const ATARequest g_ataPIORequest = { ATA_AIO_PIO, { { 0, 0, 0, 0, 0 } } }; static const ATARequest g_ataResetARequest = { ATA_AIO_RESET_ASSERTED, { { 0, 0, 0, 0, 0 } } }; static const ATARequest g_ataResetCRequest = { ATA_AIO_RESET_CLEARED, { { 0, 0, 0, 0, 0 } } }; static void ataAsyncIOClearRequests(PATACONTROLLER pCtl) { int rc; rc = RTSemMutexRequest(pCtl->AsyncIORequestMutex, RT_INDEFINITE_WAIT); AssertRC(rc); pCtl->AsyncIOReqHead = 0; pCtl->AsyncIOReqTail = 0; rc = RTSemMutexRelease(pCtl->AsyncIORequestMutex); AssertRC(rc); } static void ataAsyncIOPutRequest(PATACONTROLLER pCtl, const ATARequest *pReq) { int rc; rc = RTSemMutexRequest(pCtl->AsyncIORequestMutex, RT_INDEFINITE_WAIT); AssertRC(rc); Assert((pCtl->AsyncIOReqHead + 1) % RT_ELEMENTS(pCtl->aAsyncIORequests) != pCtl->AsyncIOReqTail); memcpy(&pCtl->aAsyncIORequests[pCtl->AsyncIOReqHead], pReq, sizeof(*pReq)); pCtl->AsyncIOReqHead++; pCtl->AsyncIOReqHead %= RT_ELEMENTS(pCtl->aAsyncIORequests); rc = RTSemMutexRelease(pCtl->AsyncIORequestMutex); AssertRC(rc); rc = PDMR3CritSectScheduleExitEvent(&pCtl->lock, pCtl->AsyncIOSem); if (RT_FAILURE(rc)) { rc = RTSemEventSignal(pCtl->AsyncIOSem); AssertRC(rc); } } static const ATARequest *ataAsyncIOGetCurrentRequest(PATACONTROLLER pCtl) { int rc; const ATARequest *pReq; rc = RTSemMutexRequest(pCtl->AsyncIORequestMutex, RT_INDEFINITE_WAIT); AssertRC(rc); if (pCtl->AsyncIOReqHead != pCtl->AsyncIOReqTail) pReq = &pCtl->aAsyncIORequests[pCtl->AsyncIOReqTail]; else pReq = NULL; rc = RTSemMutexRelease(pCtl->AsyncIORequestMutex); AssertRC(rc); return pReq; } /** * Remove the request with the given type, as it's finished. The request * is not removed blindly, as this could mean a RESET request that is not * yet processed (but has cleared the request queue) is lost. * * @param pCtl Controller for which to remove the request. * @param ReqType Type of the request to remove. */ static void ataAsyncIORemoveCurrentRequest(PATACONTROLLER pCtl, ATAAIO ReqType) { int rc; rc = RTSemMutexRequest(pCtl->AsyncIORequestMutex, RT_INDEFINITE_WAIT); AssertRC(rc); if (pCtl->AsyncIOReqHead != pCtl->AsyncIOReqTail && pCtl->aAsyncIORequests[pCtl->AsyncIOReqTail].ReqType == ReqType) { pCtl->AsyncIOReqTail++; pCtl->AsyncIOReqTail %= RT_ELEMENTS(pCtl->aAsyncIORequests); } rc = RTSemMutexRelease(pCtl->AsyncIORequestMutex); AssertRC(rc); } /** * Dump the request queue for a particular controller. First dump the queue * contents, then the already processed entries, as long as they haven't been * overwritten. * * @param pCtl Controller for which to dump the queue. */ static void ataAsyncIODumpRequests(PATACONTROLLER pCtl) { int rc; uint8_t curr; rc = RTSemMutexRequest(pCtl->AsyncIORequestMutex, RT_INDEFINITE_WAIT); AssertRC(rc); LogRel(("PIIX3 ATA: Ctl#%d: request queue dump (topmost is current):\n", ATACONTROLLER_IDX(pCtl))); curr = pCtl->AsyncIOReqTail; do { if (curr == pCtl->AsyncIOReqHead) LogRel(("PIIX3 ATA: Ctl#%d: processed requests (topmost is oldest):\n", ATACONTROLLER_IDX(pCtl))); switch (pCtl->aAsyncIORequests[curr].ReqType) { case ATA_AIO_NEW: LogRel(("new transfer request, iIf=%d iBeginTransfer=%d iSourceSink=%d cbTotalTransfer=%d uTxDir=%d\n", pCtl->aAsyncIORequests[curr].u.t.iIf, pCtl->aAsyncIORequests[curr].u.t.iBeginTransfer, pCtl->aAsyncIORequests[curr].u.t.iSourceSink, pCtl->aAsyncIORequests[curr].u.t.cbTotalTransfer, pCtl->aAsyncIORequests[curr].u.t.uTxDir)); break; case ATA_AIO_DMA: LogRel(("dma transfer continuation\n")); break; case ATA_AIO_PIO: LogRel(("pio transfer continuation\n")); break; case ATA_AIO_RESET_ASSERTED: LogRel(("reset asserted request\n")); break; case ATA_AIO_RESET_CLEARED: LogRel(("reset cleared request\n")); break; case ATA_AIO_ABORT: LogRel(("abort request, iIf=%d fResetDrive=%d\n", pCtl->aAsyncIORequests[curr].u.a.iIf, pCtl->aAsyncIORequests[curr].u.a.fResetDrive)); break; default: LogRel(("unknown request %d\n", pCtl->aAsyncIORequests[curr].ReqType)); } curr = (curr + 1) % RT_ELEMENTS(pCtl->aAsyncIORequests); } while (curr != pCtl->AsyncIOReqTail); rc = RTSemMutexRelease(pCtl->AsyncIORequestMutex); AssertRC(rc); } /** * Checks whether the request queue for a particular controller is empty * or whether a particular controller is idle. * * @param pCtl Controller for which to check the queue. * @param fStrict If set then the controller is checked to be idle. */ static bool ataAsyncIOIsIdle(PATACONTROLLER pCtl, bool fStrict) { int rc; bool fIdle; rc = RTSemMutexRequest(pCtl->AsyncIORequestMutex, RT_INDEFINITE_WAIT); AssertRC(rc); fIdle = pCtl->fRedoIdle; if (!fIdle) fIdle = (pCtl->AsyncIOReqHead == pCtl->AsyncIOReqTail); if (fStrict) fIdle &= (pCtl->uAsyncIOState == ATA_AIO_NEW); rc = RTSemMutexRelease(pCtl->AsyncIORequestMutex); AssertRC(rc); return fIdle; } /** * Send a transfer request to the async I/O thread. * * @param s Pointer to the ATA device state data. * @param cbTotalTransfer Data transfer size. * @param uTxDir Data transfer direction. * @param iBeginTransfer Index of BeginTransfer callback. * @param iSourceSink Index of SourceSink callback. * @param fChainedTransfer Whether this is a transfer that is part of the previous command/transfer. */ static void ataStartTransfer(ATADevState *s, uint32_t cbTotalTransfer, uint8_t uTxDir, ATAFNBT iBeginTransfer, ATAFNSS iSourceSink, bool fChainedTransfer) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); ATARequest Req; Assert(PDMCritSectIsOwner(&pCtl->lock)); /* Do not issue new requests while the RESET line is asserted. */ if (pCtl->fReset) { Log2(("%s: Ctl#%d: suppressed new request as RESET is active\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); return; } /* If the controller is already doing something else right now, ignore * the command that is being submitted. Some broken guests issue commands * twice (e.g. the Linux kernel that comes with Acronis True Image 8). */ if (!fChainedTransfer && !ataAsyncIOIsIdle(pCtl, true /*fStrict*/)) { Log(("%s: Ctl#%d: ignored command %#04x, controller state %d\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl), s->uATARegCommand, pCtl->uAsyncIOState)); LogRel(("PIIX3 IDE: guest issued command %#04x while controller busy\n", s->uATARegCommand)); return; } Req.ReqType = ATA_AIO_NEW; if (fChainedTransfer) Req.u.t.iIf = pCtl->iAIOIf; else Req.u.t.iIf = pCtl->iSelectedIf; Req.u.t.cbTotalTransfer = cbTotalTransfer; Req.u.t.uTxDir = uTxDir; Req.u.t.iBeginTransfer = iBeginTransfer; Req.u.t.iSourceSink = iSourceSink; ataSetStatusValue(s, ATA_STAT_BUSY); pCtl->fChainedTransfer = fChainedTransfer; /* * Kick the worker thread into action. */ Log2(("%s: Ctl#%d: message to async I/O thread, new request\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); ataAsyncIOPutRequest(pCtl, &Req); } /** * Send an abort command request to the async I/O thread. * * @param s Pointer to the ATA device state data. * @param fResetDrive Whether to reset the drive or just abort a command. */ static void ataAbortCurrentCommand(ATADevState *s, bool fResetDrive) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); ATARequest Req; Assert(PDMCritSectIsOwner(&pCtl->lock)); /* Do not issue new requests while the RESET line is asserted. */ if (pCtl->fReset) { Log2(("%s: Ctl#%d: suppressed aborting command as RESET is active\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); return; } Req.ReqType = ATA_AIO_ABORT; Req.u.a.iIf = pCtl->iSelectedIf; Req.u.a.fResetDrive = fResetDrive; ataSetStatus(s, ATA_STAT_BUSY); Log2(("%s: Ctl#%d: message to async I/O thread, abort command on LUN#%d\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl), s->iLUN)); ataAsyncIOPutRequest(pCtl, &Req); } static void ataSetIRQ(ATADevState *s) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); PPDMDEVINS pDevIns = ATADEVSTATE_2_DEVINS(s); if (!(s->uATARegDevCtl & ATA_DEVCTL_DISABLE_IRQ)) { Log2(("%s: LUN#%d asserting IRQ\n", __FUNCTION__, s->iLUN)); /* The BMDMA unit unconditionally sets BM_STATUS_INT if the interrupt * line is asserted. It monitors the line for a rising edge. */ if (!s->fIrqPending) pCtl->BmDma.u8Status |= BM_STATUS_INT; /* Only actually set the IRQ line if updating the currently selected drive. */ if (s == &pCtl->aIfs[pCtl->iSelectedIf]) { /** @todo experiment with adaptive IRQ delivery: for reads it is * better to wait for IRQ delivery, as it reduces latency. */ if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 1); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 1); } } s->fIrqPending = true; } #endif /* IN_RING3 */ static void ataUnsetIRQ(ATADevState *s) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); PPDMDEVINS pDevIns = ATADEVSTATE_2_DEVINS(s); if (!(s->uATARegDevCtl & ATA_DEVCTL_DISABLE_IRQ)) { Log2(("%s: LUN#%d deasserting IRQ\n", __FUNCTION__, s->iLUN)); /* Only actually unset the IRQ line if updating the currently selected drive. */ if (s == &pCtl->aIfs[pCtl->iSelectedIf]) { if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 0); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 0); } } s->fIrqPending = false; } #ifdef IN_RING3 static void ataPIOTransferStart(ATADevState *s, uint32_t start, uint32_t size) { Log2(("%s: LUN#%d start %d size %d\n", __FUNCTION__, s->iLUN, start, size)); s->iIOBufferPIODataStart = start; s->iIOBufferPIODataEnd = start + size; ataSetStatus(s, ATA_STAT_DRQ | ATA_STAT_SEEK); } static void ataPIOTransferStop(ATADevState *s) { Log2(("%s: LUN#%d\n", __FUNCTION__, s->iLUN)); if (s->fATAPITransfer) { s->uATARegNSector = (s->uATARegNSector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; Log2(("%s: interrupt reason %#04x\n", __FUNCTION__, s->uATARegNSector)); ataSetIRQ(s); s->fATAPITransfer = false; } s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->iIOBufferPIODataStart = 0; s->iIOBufferPIODataEnd = 0; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; } static void ataPIOTransferLimitATAPI(ATADevState *s) { uint32_t cbLimit, cbTransfer; cbLimit = s->uATARegLCyl | (s->uATARegHCyl << 8); /* Use maximum transfer size if the guest requested 0. Avoids a hang. */ if (cbLimit == 0) cbLimit = 0xfffe; Log2(("%s: byte count limit=%d\n", __FUNCTION__, cbLimit)); if (cbLimit == 0xffff) cbLimit--; cbTransfer = RT_MIN(s->cbTotalTransfer, s->iIOBufferEnd - s->iIOBufferCur); if (cbTransfer > cbLimit) { /* Byte count limit for clipping must be even in this case */ if (cbLimit & 1) cbLimit--; cbTransfer = cbLimit; } s->uATARegLCyl = cbTransfer; s->uATARegHCyl = cbTransfer >> 8; s->cbElementaryTransfer = cbTransfer; } static uint32_t ataGetNSectors(ATADevState *s) { /* 0 means either 256 (LBA28) or 65536 (LBA48) sectors. */ if (s->fLBA48) { if (!s->uATARegNSector && !s->uATARegNSectorHOB) return 65536; else return s->uATARegNSectorHOB << 8 | s->uATARegNSector; } else { if (!s->uATARegNSector) return 256; else return s->uATARegNSector; } } static void ataPadString(uint8_t *pbDst, const char *pbSrc, uint32_t cbSize) { for (uint32_t i = 0; i < cbSize; i++) { if (*pbSrc) pbDst[i ^ 1] = *pbSrc++; else pbDst[i ^ 1] = ' '; } } static void ataSCSIPadStr(uint8_t *pbDst, const char *pbSrc, uint32_t cbSize) { for (uint32_t i = 0; i < cbSize; i++) { if (*pbSrc) pbDst[i] = *pbSrc++; else pbDst[i] = ' '; } } DECLINLINE(void) ataH2BE_U16(uint8_t *pbBuf, uint16_t val) { pbBuf[0] = val >> 8; pbBuf[1] = val; } DECLINLINE(void) ataH2BE_U24(uint8_t *pbBuf, uint32_t val) { pbBuf[0] = val >> 16; pbBuf[1] = val >> 8; pbBuf[2] = val; } DECLINLINE(void) ataH2BE_U32(uint8_t *pbBuf, uint32_t val) { pbBuf[0] = val >> 24; pbBuf[1] = val >> 16; pbBuf[2] = val >> 8; pbBuf[3] = val; } DECLINLINE(uint16_t) ataBE2H_U16(const uint8_t *pbBuf) { return (pbBuf[0] << 8) | pbBuf[1]; } DECLINLINE(uint32_t) ataBE2H_U24(const uint8_t *pbBuf) { return (pbBuf[0] << 16) | (pbBuf[1] << 8) | pbBuf[2]; } DECLINLINE(uint32_t) ataBE2H_U32(const uint8_t *pbBuf) { return (pbBuf[0] << 24) | (pbBuf[1] << 16) | (pbBuf[2] << 8) | pbBuf[3]; } DECLINLINE(void) ataLBA2MSF(uint8_t *pbBuf, uint32_t iATAPILBA) { iATAPILBA += 150; pbBuf[0] = (iATAPILBA / 75) / 60; pbBuf[1] = (iATAPILBA / 75) % 60; pbBuf[2] = iATAPILBA % 75; } DECLINLINE(uint32_t) ataMSF2LBA(const uint8_t *pbBuf) { return (pbBuf[0] * 60 + pbBuf[1]) * 75 + pbBuf[2]; } /** * Compares two MSF values. * * @returns 1 if the first value is greater than the second value. * 0 if both are equal * -1 if the first value is smaller than the second value. */ DECLINLINE(int) atapiCmpMSF(const uint8_t *pbMSF1, const uint8_t *pbMSF2) { int iRes = 0; for (unsigned i = 0; i < 3; i++) { if (pbMSF1[i] < pbMSF2[i]) { iRes = -1; break; } else if (pbMSF1[i] > pbMSF2[i]) { iRes = 1; break; } } return iRes; } static void ataCmdOK(ATADevState *s, uint8_t status) { s->uATARegError = 0; /* Not needed by ATA spec, but cannot hurt. */ ataSetStatusValue(s, ATA_STAT_READY | status); } static void ataCmdError(ATADevState *s, uint8_t uErrorCode) { Log(("%s: code=%#x\n", __FUNCTION__, uErrorCode)); Assert(uErrorCode); s->uATARegError = uErrorCode; ataSetStatusValue(s, ATA_STAT_READY | ATA_STAT_ERR); s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->iIOBufferCur = 0; s->iIOBufferEnd = 0; s->uTxDir = PDMBLOCKTXDIR_NONE; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; } static uint32_t ataChecksum(void* ptr, size_t count) { uint8_t u8Sum = 0xa5, *p = (uint8_t*)ptr; size_t i; for (i = 0; i < count; i++) { u8Sum += *p++; } return (uint8_t)-(int32_t)u8Sum; } static bool ataIdentifySS(ATADevState *s) { uint16_t *p; Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer == 512); p = (uint16_t *)s->CTX_SUFF(pbIOBuffer); memset(p, 0, 512); p[0] = RT_H2LE_U16(0x0040); p[1] = RT_H2LE_U16(RT_MIN(s->PCHSGeometry.cCylinders, 16383)); p[3] = RT_H2LE_U16(s->PCHSGeometry.cHeads); /* Block size; obsolete, but required for the BIOS. */ p[5] = RT_H2LE_U16(512); p[6] = RT_H2LE_U16(s->PCHSGeometry.cSectors); ataPadString((uint8_t *)(p + 10), s->szSerialNumber, ATA_SERIAL_NUMBER_LENGTH); /* serial number */ p[20] = RT_H2LE_U16(3); /* XXX: retired, cache type */ p[21] = RT_H2LE_U16(512); /* XXX: retired, cache size in sectors */ p[22] = RT_H2LE_U16(0); /* ECC bytes per sector */ ataPadString((uint8_t *)(p + 23), s->szFirmwareRevision, ATA_FIRMWARE_REVISION_LENGTH); /* firmware version */ ataPadString((uint8_t *)(p + 27), s->szModelNumber, ATA_MODEL_NUMBER_LENGTH); /* model */ #if ATA_MAX_MULT_SECTORS > 1 p[47] = RT_H2LE_U16(0x8000 | ATA_MAX_MULT_SECTORS); #endif p[48] = RT_H2LE_U16(1); /* dword I/O, used by the BIOS */ p[49] = RT_H2LE_U16(1 << 11 | 1 << 9 | 1 << 8); /* DMA and LBA supported */ p[50] = RT_H2LE_U16(1 << 14); /* No drive specific standby timer minimum */ p[51] = RT_H2LE_U16(240); /* PIO transfer cycle */ p[52] = RT_H2LE_U16(240); /* DMA transfer cycle */ p[53] = RT_H2LE_U16(1 | 1 << 1 | 1 << 2); /* words 54-58,64-70,88 valid */ p[54] = RT_H2LE_U16(RT_MIN(s->PCHSGeometry.cCylinders, 16383)); p[55] = RT_H2LE_U16(s->PCHSGeometry.cHeads); p[56] = RT_H2LE_U16(s->PCHSGeometry.cSectors); p[57] = RT_H2LE_U16( RT_MIN(s->PCHSGeometry.cCylinders, 16383) * s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors); p[58] = RT_H2LE_U16( RT_MIN(s->PCHSGeometry.cCylinders, 16383) * s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors >> 16); if (s->cMultSectors) p[59] = RT_H2LE_U16(0x100 | s->cMultSectors); if (s->cTotalSectors <= (1 << 28) - 1) { p[60] = RT_H2LE_U16(s->cTotalSectors); p[61] = RT_H2LE_U16(s->cTotalSectors >> 16); } else { /* Report maximum number of sectors possible with LBA28 */ p[60] = RT_H2LE_U16(((1 << 28) - 1) & 0xffff); p[61] = RT_H2LE_U16(((1 << 28) - 1) >> 16); } p[63] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_MDMA, ATA_MDMA_MODE_MAX, s->uATATransferMode)); /* MDMA modes supported / mode enabled */ p[64] = RT_H2LE_U16(ATA_PIO_MODE_MAX > 2 ? (1 << (ATA_PIO_MODE_MAX - 2)) - 1 : 0); /* PIO modes beyond PIO2 supported */ p[65] = RT_H2LE_U16(120); /* minimum DMA multiword tx cycle time */ p[66] = RT_H2LE_U16(120); /* recommended DMA multiword tx cycle time */ p[67] = RT_H2LE_U16(120); /* minimum PIO cycle time without flow control */ p[68] = RT_H2LE_U16(120); /* minimum PIO cycle time with IORDY flow control */ if (s->pDrvBlock->pfnDiscard) { p[80] = RT_H2LE_U16(0x1f0); /* support everything up to ATA/ATAPI-8 ACS */ p[81] = RT_H2LE_U16(0x28); /* conforms to ATA/ATAPI-8 ACS */ } else { p[80] = RT_H2LE_U16(0x7e); /* support everything up to ATA/ATAPI-6 */ p[81] = RT_H2LE_U16(0x22); /* conforms to ATA/ATAPI-6 */ } p[82] = RT_H2LE_U16(1 << 3 | 1 << 5 | 1 << 6); /* supports power management, write cache and look-ahead */ if (s->cTotalSectors <= (1 << 28) - 1) p[83] = RT_H2LE_U16(1 << 14 | 1 << 12); /* supports FLUSH CACHE */ else p[83] = RT_H2LE_U16(1 << 14 | 1 << 10 | 1 << 12 | 1 << 13); /* supports LBA48, FLUSH CACHE and FLUSH CACHE EXT */ p[84] = RT_H2LE_U16(1 << 14); p[85] = RT_H2LE_U16(1 << 3 | 1 << 5 | 1 << 6); /* enabled power management, write cache and look-ahead */ if (s->cTotalSectors <= (1 << 28) - 1) p[86] = RT_H2LE_U16(1 << 12); /* enabled FLUSH CACHE */ else p[86] = RT_H2LE_U16(1 << 10 | 1 << 12 | 1 << 13); /* enabled LBA48, FLUSH CACHE and FLUSH CACHE EXT */ p[87] = RT_H2LE_U16(1 << 14); p[88] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_UDMA, ATA_UDMA_MODE_MAX, s->uATATransferMode)); /* UDMA modes supported / mode enabled */ p[93] = RT_H2LE_U16((1 | 1 << 1) << ((s->iLUN & 1) == 0 ? 0 : 8) | 1 << 13 | 1 << 14); if (s->cTotalSectors > (1 << 28) - 1) { p[100] = RT_H2LE_U16(s->cTotalSectors); p[101] = RT_H2LE_U16(s->cTotalSectors >> 16); p[102] = RT_H2LE_U16(s->cTotalSectors >> 32); p[103] = RT_H2LE_U16(s->cTotalSectors >> 48); } if (s->pDrvBlock->pfnDiscard) /** @todo: Set bit 14 in word 69 too? (Deterministic read after TRIM). */ p[169] = RT_H2LE_U16(1); /* DATA SET MANAGEMENT command supported. */ if (s->fNonRotational) p[217] = RT_H2LE_U16(1); /* Non-rotational medium */ uint32_t uCsum = ataChecksum(p, 510); p[255] = RT_H2LE_U16(0xa5 | (uCsum << 8)); /* Integrity word */ s->iSourceSink = ATAFN_SS_NULL; ataCmdOK(s, ATA_STAT_SEEK); return false; } static bool ataFlushSS(ATADevState *s) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); int rc; Assert(s->uTxDir == PDMBLOCKTXDIR_NONE); Assert(!s->cbElementaryTransfer); PDMCritSectLeave(&pCtl->lock); STAM_PROFILE_START(&s->StatFlushes, f); rc = s->pDrvBlock->pfnFlush(s->pDrvBlock); AssertRC(rc); STAM_PROFILE_STOP(&s->StatFlushes, f); STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); ataCmdOK(s, 0); return false; } static bool atapiIdentifySS(ATADevState *s) { uint16_t *p; Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer == 512); p = (uint16_t *)s->CTX_SUFF(pbIOBuffer); memset(p, 0, 512); /* Removable CDROM, 50us response, 12 byte packets */ p[0] = RT_H2LE_U16(2 << 14 | 5 << 8 | 1 << 7 | 2 << 5 | 0 << 0); ataPadString((uint8_t *)(p + 10), s->szSerialNumber, ATA_SERIAL_NUMBER_LENGTH); /* serial number */ p[20] = RT_H2LE_U16(3); /* XXX: retired, cache type */ p[21] = RT_H2LE_U16(512); /* XXX: retired, cache size in sectors */ ataPadString((uint8_t *)(p + 23), s->szFirmwareRevision, ATA_FIRMWARE_REVISION_LENGTH); /* firmware version */ ataPadString((uint8_t *)(p + 27), s->szModelNumber, ATA_MODEL_NUMBER_LENGTH); /* model */ p[49] = RT_H2LE_U16(1 << 11 | 1 << 9 | 1 << 8); /* DMA and LBA supported */ p[50] = RT_H2LE_U16(1 << 14); /* No drive specific standby timer minimum */ p[51] = RT_H2LE_U16(240); /* PIO transfer cycle */ p[52] = RT_H2LE_U16(240); /* DMA transfer cycle */ p[53] = RT_H2LE_U16(1 << 1 | 1 << 2); /* words 64-70,88 are valid */ p[63] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_MDMA, ATA_MDMA_MODE_MAX, s->uATATransferMode)); /* MDMA modes supported / mode enabled */ p[64] = RT_H2LE_U16(ATA_PIO_MODE_MAX > 2 ? (1 << (ATA_PIO_MODE_MAX - 2)) - 1 : 0); /* PIO modes beyond PIO2 supported */ p[65] = RT_H2LE_U16(120); /* minimum DMA multiword tx cycle time */ p[66] = RT_H2LE_U16(120); /* recommended DMA multiword tx cycle time */ p[67] = RT_H2LE_U16(120); /* minimum PIO cycle time without flow control */ p[68] = RT_H2LE_U16(120); /* minimum PIO cycle time with IORDY flow control */ p[73] = RT_H2LE_U16(0x003e); /* ATAPI CDROM major */ p[74] = RT_H2LE_U16(9); /* ATAPI CDROM minor */ p[75] = RT_H2LE_U16(1); /* queue depth 1 */ p[80] = RT_H2LE_U16(0x7e); /* support everything up to ATA/ATAPI-6 */ p[81] = RT_H2LE_U16(0x22); /* conforms to ATA/ATAPI-6 */ p[82] = RT_H2LE_U16(1 << 4 | 1 << 9); /* supports packet command set and DEVICE RESET */ p[83] = RT_H2LE_U16(1 << 14); p[84] = RT_H2LE_U16(1 << 14); p[85] = RT_H2LE_U16(1 << 4 | 1 << 9); /* enabled packet command set and DEVICE RESET */ p[86] = RT_H2LE_U16(0); p[87] = RT_H2LE_U16(1 << 14); p[88] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_UDMA, ATA_UDMA_MODE_MAX, s->uATATransferMode)); /* UDMA modes supported / mode enabled */ p[93] = RT_H2LE_U16((1 | 1 << 1) << ((s->iLUN & 1) == 0 ? 0 : 8) | 1 << 13 | 1 << 14); /* According to ATAPI-5 spec: * * The use of this word is optional. * If bits 7:0 of this word contain the signature A5h, bits 15:8 * contain the data * structure checksum. * The data structure checksum is the twos complement of the sum of * all bytes in words 0 through 254 and the byte consisting of * bits 7:0 in word 255. * Each byte shall be added with unsigned arithmetic, * and overflow shall be ignored. * The sum of all 512 bytes is zero when the checksum is correct. */ uint32_t uCsum = ataChecksum(p, 510); p[255] = RT_H2LE_U16(0xa5 | (uCsum << 8)); /* Integrity word */ s->iSourceSink = ATAFN_SS_NULL; ataCmdOK(s, ATA_STAT_SEEK); return false; } static void ataSetSignature(ATADevState *s) { s->uATARegSelect &= 0xf0; /* clear head */ /* put signature */ s->uATARegNSector = 1; s->uATARegSector = 1; if (s->fATAPI) { s->uATARegLCyl = 0x14; s->uATARegHCyl = 0xeb; } else if (s->pDrvBlock) { s->uATARegLCyl = 0; s->uATARegHCyl = 0; } else { s->uATARegLCyl = 0xff; s->uATARegHCyl = 0xff; } } static uint64_t ataGetSector(ATADevState *s) { uint64_t iLBA; if (s->uATARegSelect & 0x40) { /* any LBA variant */ if (s->fLBA48) { /* LBA48 */ iLBA = ((uint64_t)s->uATARegHCylHOB << 40) | ((uint64_t)s->uATARegLCylHOB << 32) | ((uint64_t)s->uATARegSectorHOB << 24) | ((uint64_t)s->uATARegHCyl << 16) | ((uint64_t)s->uATARegLCyl << 8) | s->uATARegSector; } else { /* LBA */ iLBA = ((s->uATARegSelect & 0x0f) << 24) | (s->uATARegHCyl << 16) | (s->uATARegLCyl << 8) | s->uATARegSector; } } else { /* CHS */ iLBA = ((s->uATARegHCyl << 8) | s->uATARegLCyl) * s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors + (s->uATARegSelect & 0x0f) * s->PCHSGeometry.cSectors + (s->uATARegSector - 1); } return iLBA; } static void ataSetSector(ATADevState *s, uint64_t iLBA) { uint32_t cyl, r; if (s->uATARegSelect & 0x40) { /* any LBA variant */ if (s->fLBA48) { /* LBA48 */ s->uATARegHCylHOB = iLBA >> 40; s->uATARegLCylHOB = iLBA >> 32; s->uATARegSectorHOB = iLBA >> 24; s->uATARegHCyl = iLBA >> 16; s->uATARegLCyl = iLBA >> 8; s->uATARegSector = iLBA; } else { /* LBA */ s->uATARegSelect = (s->uATARegSelect & 0xf0) | (iLBA >> 24); s->uATARegHCyl = (iLBA >> 16); s->uATARegLCyl = (iLBA >> 8); s->uATARegSector = (iLBA); } } else { /* CHS */ cyl = iLBA / (s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors); r = iLBA % (s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors); s->uATARegHCyl = cyl >> 8; s->uATARegLCyl = cyl; s->uATARegSelect = (s->uATARegSelect & 0xf0) | ((r / s->PCHSGeometry.cSectors) & 0x0f); s->uATARegSector = (r % s->PCHSGeometry.cSectors) + 1; } } static void ataWarningDiskFull(PPDMDEVINS pDevIns) { int rc; LogRel(("PIIX3 ATA: Host disk full\n")); rc = PDMDevHlpVMSetRuntimeError(pDevIns, VMSETRTERR_FLAGS_SUSPEND | VMSETRTERR_FLAGS_NO_WAIT, "DevATA_DISKFULL", N_("Host system reported disk full. VM execution is suspended. You can resume after freeing some space")); AssertRC(rc); } static void ataWarningFileTooBig(PPDMDEVINS pDevIns) { int rc; LogRel(("PIIX3 ATA: File too big\n")); rc = PDMDevHlpVMSetRuntimeError(pDevIns, VMSETRTERR_FLAGS_SUSPEND | VMSETRTERR_FLAGS_NO_WAIT, "DevATA_FILETOOBIG", N_("Host system reported that the file size limit of the host file system has been exceeded. VM execution is suspended. You need to move your virtual hard disk to a filesystem which allows bigger files")); AssertRC(rc); } static void ataWarningISCSI(PPDMDEVINS pDevIns) { int rc; LogRel(("PIIX3 ATA: iSCSI target unavailable\n")); rc = PDMDevHlpVMSetRuntimeError(pDevIns, VMSETRTERR_FLAGS_SUSPEND | VMSETRTERR_FLAGS_NO_WAIT, "DevATA_ISCSIDOWN", N_("The iSCSI target has stopped responding. VM execution is suspended. You can resume when it is available again")); AssertRC(rc); } static bool ataIsRedoSetWarning(ATADevState *s, int rc) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); Assert(!PDMCritSectIsOwner(&pCtl->lock)); if (rc == VERR_DISK_FULL) { pCtl->fRedoIdle = true; ataWarningDiskFull(ATADEVSTATE_2_DEVINS(s)); return true; } if (rc == VERR_FILE_TOO_BIG) { pCtl->fRedoIdle = true; ataWarningFileTooBig(ATADEVSTATE_2_DEVINS(s)); return true; } if (rc == VERR_BROKEN_PIPE || rc == VERR_NET_CONNECTION_REFUSED) { pCtl->fRedoIdle = true; /* iSCSI connection abort (first error) or failure to reestablish * connection (second error). Pause VM. On resume we'll retry. */ ataWarningISCSI(ATADEVSTATE_2_DEVINS(s)); return true; } return false; } static int ataReadSectors(ATADevState *s, uint64_t u64Sector, void *pvBuf, uint32_t cSectors, bool *pfRedo) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); int rc; PDMCritSectLeave(&pCtl->lock); STAM_PROFILE_ADV_START(&s->StatReads, r); s->Led.Asserted.s.fReading = s->Led.Actual.s.fReading = 1; rc = s->pDrvBlock->pfnRead(s->pDrvBlock, u64Sector * 512, pvBuf, cSectors * 512); s->Led.Actual.s.fReading = 0; STAM_PROFILE_ADV_STOP(&s->StatReads, r); STAM_REL_COUNTER_ADD(&s->StatBytesRead, cSectors * 512); if (RT_SUCCESS(rc)) *pfRedo = false; else *pfRedo = ataIsRedoSetWarning(s, rc); STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); return rc; } static int ataWriteSectors(ATADevState *s, uint64_t u64Sector, const void *pvBuf, uint32_t cSectors, bool *pfRedo) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); int rc; PDMCritSectLeave(&pCtl->lock); STAM_PROFILE_ADV_START(&s->StatWrites, w); s->Led.Asserted.s.fWriting = s->Led.Actual.s.fWriting = 1; #ifdef VBOX_INSTRUMENT_DMA_WRITES if (s->fDMA) STAM_PROFILE_ADV_START(&s->StatInstrVDWrites, vw); #endif rc = s->pDrvBlock->pfnWrite(s->pDrvBlock, u64Sector * 512, pvBuf, cSectors * 512); #ifdef VBOX_INSTRUMENT_DMA_WRITES if (s->fDMA) STAM_PROFILE_ADV_STOP(&s->StatInstrVDWrites, vw); #endif s->Led.Actual.s.fWriting = 0; STAM_PROFILE_ADV_STOP(&s->StatWrites, w); STAM_REL_COUNTER_ADD(&s->StatBytesWritten, cSectors * 512); if (RT_SUCCESS(rc)) *pfRedo = false; else *pfRedo = ataIsRedoSetWarning(s, rc); STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); return rc; } static void ataReadWriteSectorsBT(ATADevState *s) { uint32_t cSectors; cSectors = s->cbTotalTransfer / 512; if (cSectors > s->cSectorsPerIRQ) s->cbElementaryTransfer = s->cSectorsPerIRQ * 512; else s->cbElementaryTransfer = cSectors * 512; if (s->uTxDir == PDMBLOCKTXDIR_TO_DEVICE) ataCmdOK(s, 0); } static bool ataReadSectorsSS(ATADevState *s) { int rc; uint32_t cSectors; uint64_t iLBA; bool fRedo; cSectors = s->cbElementaryTransfer / 512; Assert(cSectors); iLBA = ataGetSector(s); Log(("%s: %d sectors at LBA %d\n", __FUNCTION__, cSectors, iLBA)); rc = ataReadSectors(s, iLBA, s->CTX_SUFF(pbIOBuffer), cSectors, &fRedo); if (RT_SUCCESS(rc)) { ataSetSector(s, iLBA + cSectors); if (s->cbElementaryTransfer == s->cbTotalTransfer) s->iSourceSink = ATAFN_SS_NULL; ataCmdOK(s, ATA_STAT_SEEK); } else { if (fRedo) return fRedo; if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: disk read error (rc=%Rrc iSector=%#RX64 cSectors=%#RX32)\n", s->iLUN, rc, iLBA, cSectors)); /* * Check if we got interrupted. We don't need to set status variables * because the request was aborted. */ if (rc != VERR_INTERRUPTED) ataCmdError(s, ID_ERR); } return false; } static bool ataWriteSectorsSS(ATADevState *s) { int rc; uint32_t cSectors; uint64_t iLBA; bool fRedo; cSectors = s->cbElementaryTransfer / 512; Assert(cSectors); iLBA = ataGetSector(s); Log(("%s: %d sectors at LBA %d\n", __FUNCTION__, cSectors, iLBA)); rc = ataWriteSectors(s, iLBA, s->CTX_SUFF(pbIOBuffer), cSectors, &fRedo); if (RT_SUCCESS(rc)) { ataSetSector(s, iLBA + cSectors); if (!s->cbTotalTransfer) s->iSourceSink = ATAFN_SS_NULL; ataCmdOK(s, ATA_STAT_SEEK); } else { if (fRedo) return fRedo; if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: disk write error (rc=%Rrc iSector=%#RX64 cSectors=%#RX32)\n", s->iLUN, rc, iLBA, cSectors)); /* * Check if we got interrupted. We don't need to set status variables * because the request was aborted. */ if (rc != VERR_INTERRUPTED) ataCmdError(s, ID_ERR); } return false; } static void atapiCmdOK(ATADevState *s) { s->uATARegError = 0; ataSetStatusValue(s, ATA_STAT_READY); s->uATARegNSector = (s->uATARegNSector & ~7) | ((s->uTxDir != PDMBLOCKTXDIR_TO_DEVICE) ? ATAPI_INT_REASON_IO : 0) | (!s->cbTotalTransfer ? ATAPI_INT_REASON_CD : 0); Log2(("%s: interrupt reason %#04x\n", __FUNCTION__, s->uATARegNSector)); memset(s->abATAPISense, '\0', sizeof(s->abATAPISense)); s->abATAPISense[0] = 0x70 | (1 << 7); s->abATAPISense[7] = 10; } static void atapiCmdError(ATADevState *s, const uint8_t *pabATAPISense, size_t cbATAPISense) { Log(("%s: sense=%#x (%s) asc=%#x ascq=%#x (%s)\n", __FUNCTION__, pabATAPISense[2] & 0x0f, SCSISenseText(pabATAPISense[2] & 0x0f), pabATAPISense[12], pabATAPISense[13], SCSISenseExtText(pabATAPISense[12], pabATAPISense[13]))); s->uATARegError = pabATAPISense[2] << 4; ataSetStatusValue(s, ATA_STAT_READY | ATA_STAT_ERR); s->uATARegNSector = (s->uATARegNSector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; Log2(("%s: interrupt reason %#04x\n", __FUNCTION__, s->uATARegNSector)); memset(s->abATAPISense, '\0', sizeof(s->abATAPISense)); memcpy(s->abATAPISense, pabATAPISense, RT_MIN(cbATAPISense, sizeof(s->abATAPISense))); s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->iIOBufferCur = 0; s->iIOBufferEnd = 0; s->uTxDir = PDMBLOCKTXDIR_NONE; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; } /** @todo deprecated function - doesn't provide enough info. Replace by direct * calls to atapiCmdError() with full data. */ static void atapiCmdErrorSimple(ATADevState *s, uint8_t uATAPISenseKey, uint8_t uATAPIASC) { uint8_t abATAPISense[ATAPI_SENSE_SIZE]; memset(abATAPISense, '\0', sizeof(abATAPISense)); abATAPISense[0] = 0x70 | (1 << 7); abATAPISense[2] = uATAPISenseKey & 0x0f; abATAPISense[7] = 10; abATAPISense[12] = uATAPIASC; atapiCmdError(s, abATAPISense, sizeof(abATAPISense)); } static void atapiCmdBT(ATADevState *s) { s->fATAPITransfer = true; s->cbElementaryTransfer = s->cbTotalTransfer; if (s->uTxDir == PDMBLOCKTXDIR_TO_DEVICE) atapiCmdOK(s); } static void atapiPassthroughCmdBT(ATADevState *s) { /* @todo implement an algorithm for correctly determining the read and * write sector size without sending additional commands to the drive. * This should be doable by saving processing the configuration requests * and replies. */ #if 0 if (s->uTxDir == PDMBLOCKTXDIR_TO_DEVICE) { uint8_t cmd = s->aATAPICmd[0]; if (cmd == SCSI_WRITE_10 || cmd == SCSI_WRITE_12 || cmd == SCSI_WRITE_AND_VERIFY_10) { uint8_t aModeSenseCmd[10]; uint8_t aModeSenseResult[16]; uint8_t uDummySense; uint32_t cbTransfer; int rc; cbTransfer = sizeof(aModeSenseResult); aModeSenseCmd[0] = SCSI_MODE_SENSE_10; aModeSenseCmd[1] = 0x08; /* disable block descriptor = 1 */ aModeSenseCmd[2] = (SCSI_PAGECONTROL_CURRENT << 6) | SCSI_MODEPAGE_WRITE_PARAMETER; aModeSenseCmd[3] = 0; /* subpage code */ aModeSenseCmd[4] = 0; /* reserved */ aModeSenseCmd[5] = 0; /* reserved */ aModeSenseCmd[6] = 0; /* reserved */ aModeSenseCmd[7] = cbTransfer >> 8; aModeSenseCmd[8] = cbTransfer & 0xff; aModeSenseCmd[9] = 0; /* control */ rc = s->pDrvBlock->pfnSendCmd(s->pDrvBlock, aModeSenseCmd, PDMBLOCKTXDIR_FROM_DEVICE, aModeSenseResult, &cbTransfer, &uDummySense, 500); if (RT_FAILURE(rc)) { atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_NONE); return; } /* Select sector size based on the current data block type. */ switch (aModeSenseResult[12] & 0x0f) { case 0: s->cbATAPISector = 2352; break; case 1: s->cbATAPISector = 2368; break; case 2: case 3: s->cbATAPISector = 2448; break; case 8: case 10: s->cbATAPISector = 2048; break; case 9: s->cbATAPISector = 2336; break; case 11: s->cbATAPISector = 2056; break; case 12: s->cbATAPISector = 2324; break; case 13: s->cbATAPISector = 2332; break; default: s->cbATAPISector = 0; } Log2(("%s: sector size %d\n", __FUNCTION__, s->cbATAPISector)); s->cbTotalTransfer *= s->cbATAPISector; if (s->cbTotalTransfer == 0) s->uTxDir = PDMBLOCKTXDIR_NONE; } } #endif atapiCmdBT(s); } static bool atapiReadSS(ATADevState *s) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); int rc = VINF_SUCCESS; uint32_t cbTransfer, cSectors; Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); cbTransfer = RT_MIN(s->cbTotalTransfer, s->cbIOBuffer); cSectors = cbTransfer / s->cbATAPISector; Assert(cSectors * s->cbATAPISector <= cbTransfer); Log(("%s: %d sectors at LBA %d\n", __FUNCTION__, cSectors, s->iATAPILBA)); PDMCritSectLeave(&pCtl->lock); STAM_PROFILE_ADV_START(&s->StatReads, r); s->Led.Asserted.s.fReading = s->Led.Actual.s.fReading = 1; switch (s->cbATAPISector) { case 2048: rc = s->pDrvBlock->pfnRead(s->pDrvBlock, (uint64_t)s->iATAPILBA * s->cbATAPISector, s->CTX_SUFF(pbIOBuffer), s->cbATAPISector * cSectors); break; case 2352: { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); for (uint32_t i = s->iATAPILBA; i < s->iATAPILBA + cSectors; i++) { /* Sync bytes, see 4.2.3.8 CD Main Channel Block Formats */ *pbBuf++ = 0x00; memset(pbBuf, 0xff, 10); pbBuf += 10; *pbBuf++ = 0x00; /* MSF */ ataLBA2MSF(pbBuf, i); pbBuf += 3; *pbBuf++ = 0x01; /* mode 1 data */ /* data */ rc = s->pDrvBlock->pfnRead(s->pDrvBlock, (uint64_t)i * 2048, pbBuf, 2048); if (RT_FAILURE(rc)) break; pbBuf += 2048; /** * @todo: maybe compute ECC and parity, layout is: * 2072 4 EDC * 2076 172 P parity symbols * 2248 104 Q parity symbols */ memset(pbBuf, 0, 280); pbBuf += 280; } } break; default: break; } s->Led.Actual.s.fReading = 0; STAM_PROFILE_ADV_STOP(&s->StatReads, r); STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); if (RT_SUCCESS(rc)) { STAM_REL_COUNTER_ADD(&s->StatBytesRead, s->cbATAPISector * cSectors); /* The initial buffer end value has been set up based on the total * transfer size. But the I/O buffer size limits what can actually be * done in one transfer, so set the actual value of the buffer end. */ s->cbElementaryTransfer = cbTransfer; if (cbTransfer >= s->cbTotalTransfer) s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); s->iATAPILBA += cSectors; } else { if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: CD-ROM read error, %d sectors at LBA %d\n", s->iLUN, cSectors, s->iATAPILBA)); /* * Check if we got interrupted. We don't need to set status variables * because the request was aborted. */ if (rc != VERR_INTERRUPTED) atapiCmdErrorSimple(s, SCSI_SENSE_MEDIUM_ERROR, SCSI_ASC_READ_ERROR); } return false; } /** * Sets the given media track type. */ static uint32_t ataMediumTypeSet(ATADevState *s, uint32_t MediaTrackType) { return ASMAtomicXchgU32(&s->MediaTrackType, MediaTrackType); } static bool atapiPassthroughSS(ATADevState *s) { PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); int rc = VINF_SUCCESS; uint8_t abATAPISense[ATAPI_SENSE_SIZE]; uint32_t cbTransfer; PSTAMPROFILEADV pProf = NULL; cbTransfer = RT_MIN(s->cbElementaryTransfer, s->cbIOBuffer); if (s->uTxDir == PDMBLOCKTXDIR_TO_DEVICE) Log3(("ATAPI PT data write (%d): %.*Rhxs\n", cbTransfer, cbTransfer, s->CTX_SUFF(pbIOBuffer))); /* Simple heuristics: if there is at least one sector of data * to transfer, it's worth updating the LEDs. */ if (cbTransfer >= 2048) { if (s->uTxDir != PDMBLOCKTXDIR_TO_DEVICE) { s->Led.Asserted.s.fReading = s->Led.Actual.s.fReading = 1; pProf = &s->StatReads; } else { s->Led.Asserted.s.fWriting = s->Led.Actual.s.fWriting = 1; pProf = &s->StatWrites; } } PDMCritSectLeave(&pCtl->lock); #if defined(LOG_ENABLED) char szBuf[1024]; memset(szBuf, 0, sizeof(szBuf)); switch (s->aATAPICmd[0]) { case SCSI_MODE_SELECT_10: { size_t cbBlkDescLength = ataBE2H_U16(&s->CTX_SUFF(pbIOBuffer)[6]); SCSILogModePage(szBuf, sizeof(szBuf) - 1, s->CTX_SUFF(pbIOBuffer) + 8 + cbBlkDescLength, cbTransfer - 8 - cbBlkDescLength); break; } case SCSI_SEND_CUE_SHEET: { SCSILogCueSheet(szBuf, sizeof(szBuf) - 1, s->CTX_SUFF(pbIOBuffer), cbTransfer); break; } default: break; } Log2(("%s\n", szBuf)); #endif if (pProf) { STAM_PROFILE_ADV_START(pProf, b); } if ( cbTransfer > SCSI_MAX_BUFFER_SIZE || s->cbElementaryTransfer > s->cbIOBuffer) { /* Linux accepts commands with up to 100KB of data, but expects * us to handle commands with up to 128KB of data. The usual * imbalance of powers. */ uint8_t aATAPICmd[ATAPI_PACKET_SIZE]; uint32_t iATAPILBA, cSectors, cReqSectors, cbCurrTX; uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); uint32_t cSectorsMax; /**< Maximum amount of sectors to read without exceeding the I/O buffer. */ Assert(s->cbATAPISector); cSectorsMax = cbTransfer / s->cbATAPISector; Assert(cSectorsMax * s->cbATAPISector <= s->cbIOBuffer); switch (s->aATAPICmd[0]) { case SCSI_READ_10: case SCSI_WRITE_10: case SCSI_WRITE_AND_VERIFY_10: iATAPILBA = ataBE2H_U32(s->aATAPICmd + 2); cSectors = ataBE2H_U16(s->aATAPICmd + 7); break; case SCSI_READ_12: case SCSI_WRITE_12: iATAPILBA = ataBE2H_U32(s->aATAPICmd + 2); cSectors = ataBE2H_U32(s->aATAPICmd + 6); break; case SCSI_READ_CD: iATAPILBA = ataBE2H_U32(s->aATAPICmd + 2); cSectors = ataBE2H_U24(s->aATAPICmd + 6); break; case SCSI_READ_CD_MSF: iATAPILBA = ataMSF2LBA(s->aATAPICmd + 3); cSectors = ataMSF2LBA(s->aATAPICmd + 6) - iATAPILBA; break; default: AssertMsgFailed(("Don't know how to split command %#04x\n", s->aATAPICmd[0])); if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: CD-ROM passthrough split error\n", s->iLUN)); atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_ILLEGAL_OPCODE); { STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); } return false; } cSectorsMax = RT_MIN(cSectorsMax, cSectors); memcpy(aATAPICmd, s->aATAPICmd, ATAPI_PACKET_SIZE); cReqSectors = 0; for (uint32_t i = cSectorsMax; i > 0; i -= cReqSectors) { if (i * s->cbATAPISector > SCSI_MAX_BUFFER_SIZE) cReqSectors = SCSI_MAX_BUFFER_SIZE / s->cbATAPISector; else cReqSectors = i; cbCurrTX = s->cbATAPISector * cReqSectors; switch (s->aATAPICmd[0]) { case SCSI_READ_10: case SCSI_WRITE_10: case SCSI_WRITE_AND_VERIFY_10: ataH2BE_U32(aATAPICmd + 2, iATAPILBA); ataH2BE_U16(aATAPICmd + 7, cReqSectors); break; case SCSI_READ_12: case SCSI_WRITE_12: ataH2BE_U32(aATAPICmd + 2, iATAPILBA); ataH2BE_U32(aATAPICmd + 6, cReqSectors); break; case SCSI_READ_CD: ataH2BE_U32(aATAPICmd + 2, iATAPILBA); ataH2BE_U24(aATAPICmd + 6, cReqSectors); break; case SCSI_READ_CD_MSF: ataLBA2MSF(aATAPICmd + 3, iATAPILBA); ataLBA2MSF(aATAPICmd + 6, iATAPILBA + cReqSectors); break; } rc = s->pDrvBlock->pfnSendCmd(s->pDrvBlock, aATAPICmd, (PDMBLOCKTXDIR)s->uTxDir, pbBuf, &cbCurrTX, abATAPISense, sizeof(abATAPISense), 30000 /**< @todo timeout */); if (rc != VINF_SUCCESS) break; iATAPILBA += cReqSectors; pbBuf += s->cbATAPISector * cReqSectors; } if (RT_SUCCESS(rc)) { /* Adjust ATAPI command for the next call. */ switch (s->aATAPICmd[0]) { case SCSI_READ_10: case SCSI_WRITE_10: case SCSI_WRITE_AND_VERIFY_10: ataH2BE_U32(s->aATAPICmd + 2, iATAPILBA); ataH2BE_U16(s->aATAPICmd + 7, cSectors - cSectorsMax); break; case SCSI_READ_12: case SCSI_WRITE_12: ataH2BE_U32(s->aATAPICmd + 2, iATAPILBA); ataH2BE_U32(s->aATAPICmd + 6, cSectors - cSectorsMax); break; case SCSI_READ_CD: ataH2BE_U32(s->aATAPICmd + 2, iATAPILBA); ataH2BE_U24(s->aATAPICmd + 6, cSectors - cSectorsMax); break; case SCSI_READ_CD_MSF: ataLBA2MSF(s->aATAPICmd + 3, iATAPILBA); ataLBA2MSF(s->aATAPICmd + 6, iATAPILBA + cSectors - cSectorsMax); break; default: AssertMsgFailed(("Don't know how to split command %#04x\n", s->aATAPICmd[0])); if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: CD-ROM passthrough split error\n", s->iLUN)); atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_ILLEGAL_OPCODE); return false; } } } else rc = s->pDrvBlock->pfnSendCmd(s->pDrvBlock, s->aATAPICmd, (PDMBLOCKTXDIR)s->uTxDir, s->CTX_SUFF(pbIOBuffer), &cbTransfer, abATAPISense, sizeof(abATAPISense), 30000 /**< @todo timeout */); if (pProf) { STAM_PROFILE_ADV_STOP(pProf, b); } STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); /* Update the LEDs and the read/write statistics. */ if (cbTransfer >= 2048) { if (s->uTxDir != PDMBLOCKTXDIR_TO_DEVICE) { s->Led.Actual.s.fReading = 0; STAM_REL_COUNTER_ADD(&s->StatBytesRead, cbTransfer); } else { s->Led.Actual.s.fWriting = 0; STAM_REL_COUNTER_ADD(&s->StatBytesWritten, cbTransfer); } } if (RT_SUCCESS(rc)) { /* Do post processing for certain commands. */ switch (s->aATAPICmd[0]) { case SCSI_SEND_CUE_SHEET: case SCSI_READ_TOC_PMA_ATIP: { if (!s->pTrackList) rc = ATAPIPassthroughTrackListCreateEmpty(&s->pTrackList); if (RT_SUCCESS(rc)) rc = ATAPIPassthroughTrackListUpdate(s->pTrackList, s->aATAPICmd, s->CTX_SUFF(pbIOBuffer)); if ( RT_FAILURE(rc) && s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("ATA: Error (%Rrc) while updating the tracklist during %s, burning the disc might fail\n", rc, s->aATAPICmd[0] == SCSI_SEND_CUE_SHEET ? "SEND CUE SHEET" : "READ TOC/PMA/ATIP")); break; } case SCSI_SYNCHRONIZE_CACHE: { ATAPIPassthroughTrackListClear(s->pTrackList); break; } } if (s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE) { Assert(cbTransfer <= s->cbTotalTransfer); /* * Reply with the same amount of data as the real drive * but only if the command wasn't splitted. */ if (s->cbElementaryTransfer < s->cbIOBuffer) s->cbTotalTransfer = cbTransfer; if ( s->aATAPICmd[0] == SCSI_INQUIRY && s->fOverwriteInquiry) { /* Make sure that the real drive cannot be identified. * Motivation: changing the VM configuration should be as * invisible as possible to the guest. */ Log3(("ATAPI PT inquiry data before (%d): %.*Rhxs\n", cbTransfer, cbTransfer, s->CTX_SUFF(pbIOBuffer))); ataSCSIPadStr(s->CTX_SUFF(pbIOBuffer) + 8, "VBOX", 8); ataSCSIPadStr(s->CTX_SUFF(pbIOBuffer) + 16, "CD-ROM", 16); ataSCSIPadStr(s->CTX_SUFF(pbIOBuffer) + 32, "1.0", 4); } if (cbTransfer) Log3(("ATAPI PT data read (%d): %.*Rhxs\n", cbTransfer, cbTransfer, s->CTX_SUFF(pbIOBuffer))); } /* The initial buffer end value has been set up based on the total * transfer size. But the I/O buffer size limits what can actually be * done in one transfer, so set the actual value of the buffer end. */ s->cbElementaryTransfer = cbTransfer; if (cbTransfer >= s->cbTotalTransfer) { s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); } } else { if (s->cErrors < MAX_LOG_REL_ERRORS) { uint8_t u8Cmd = s->aATAPICmd[0]; do { /* don't log superfluous errors */ if ( rc == VERR_DEV_IO_ERROR && ( u8Cmd == SCSI_TEST_UNIT_READY || u8Cmd == SCSI_READ_CAPACITY || u8Cmd == SCSI_READ_DVD_STRUCTURE || u8Cmd == SCSI_READ_TOC_PMA_ATIP)) break; s->cErrors++; LogRel(("PIIX3 ATA: LUN#%d: CD-ROM passthrough cmd=%#04x sense=%d ASC=%#02x ASCQ=%#02x %Rrc\n", s->iLUN, u8Cmd, abATAPISense[2] & 0x0f, abATAPISense[12], abATAPISense[13], rc)); } while (0); } atapiCmdError(s, abATAPISense, sizeof(abATAPISense)); } return false; } /** @todo: Revise ASAP. */ static bool atapiReadDVDStructureSS(ATADevState *s) { uint8_t *buf = s->CTX_SUFF(pbIOBuffer); int media = s->aATAPICmd[1]; int format = s->aATAPICmd[7]; uint16_t max_len = ataBE2H_U16(&s->aATAPICmd[8]); memset(buf, 0, max_len); switch (format) { case 0x00: case 0x01: case 0x02: case 0x03: case 0x04: case 0x05: case 0x06: case 0x07: case 0x08: case 0x09: case 0x0a: case 0x0b: case 0x0c: case 0x0d: case 0x0e: case 0x0f: case 0x10: case 0x11: case 0x30: case 0x31: case 0xff: if (media == 0) { int uASC = SCSI_ASC_NONE; switch (format) { case 0x0: /* Physical format information */ { int layer = s->aATAPICmd[6]; uint64_t total_sectors; if (layer != 0) { uASC = -SCSI_ASC_INV_FIELD_IN_CMD_PACKET; break; } total_sectors = s->cTotalSectors; total_sectors >>= 2; if (total_sectors == 0) { uASC = -SCSI_ASC_MEDIUM_NOT_PRESENT; break; } buf[4] = 1; /* DVD-ROM, part version 1 */ buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */ buf[6] = 1; /* one layer, read-only (per MMC-2 spec) */ buf[7] = 0; /* default densities */ /* FIXME: 0x30000 per spec? */ ataH2BE_U32(buf + 8, 0); /* start sector */ ataH2BE_U32(buf + 12, total_sectors - 1); /* end sector */ ataH2BE_U32(buf + 16, total_sectors - 1); /* l0 end sector */ /* Size of buffer, not including 2 byte size field */ ataH2BE_U32(&buf[0], 2048 + 2); /* 2k data + 4 byte header */ uASC = (2048 + 4); } break; case 0x01: /* DVD copyright information */ buf[4] = 0; /* no copyright data */ buf[5] = 0; /* no region restrictions */ /* Size of buffer, not including 2 byte size field */ ataH2BE_U16(buf, 4 + 2); /* 4 byte header + 4 byte data */ uASC = (4 + 4); case 0x03: /* BCA information - invalid field for no BCA info */ uASC = -SCSI_ASC_INV_FIELD_IN_CMD_PACKET; break; case 0x04: /* DVD disc manufacturing information */ /* Size of buffer, not including 2 byte size field */ ataH2BE_U16(buf, 2048 + 2); /* 2k data + 4 byte header */ uASC = (2048 + 4); break; case 0xff: /* * This lists all the command capabilities above. Add new ones * in order and update the length and buffer return values. */ buf[4] = 0x00; /* Physical format */ buf[5] = 0x40; /* Not writable, is readable */ ataH2BE_U16((buf + 6), 2048 + 4); buf[8] = 0x01; /* Copyright info */ buf[9] = 0x40; /* Not writable, is readable */ ataH2BE_U16((buf + 10), 4 + 4); buf[12] = 0x03; /* BCA info */ buf[13] = 0x40; /* Not writable, is readable */ ataH2BE_U16((buf + 14), 188 + 4); buf[16] = 0x04; /* Manufacturing info */ buf[17] = 0x40; /* Not writable, is readable */ ataH2BE_U16((buf + 18), 2048 + 4); /* Size of buffer, not including 2 byte size field */ ataH2BE_U16(buf, 16 + 2); /* data written + 4 byte header */ uASC = (16 + 4); break; default: /* TODO: formats beyond DVD-ROM requires */ uASC = -SCSI_ASC_INV_FIELD_IN_CMD_PACKET; } if (uASC < 0) { s->iSourceSink = ATAFN_SS_NULL; atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, -uASC); return false; } break; } /* TODO: BD support, fall through for now */ /* Generic disk structures */ case 0x80: /* TODO: AACS volume identifier */ case 0x81: /* TODO: AACS media serial number */ case 0x82: /* TODO: AACS media identifier */ case 0x83: /* TODO: AACS media key block */ case 0x90: /* TODO: List of recognized format layers */ case 0xc0: /* TODO: Write protection status */ default: s->iSourceSink = ATAFN_SS_NULL; atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiReadSectors(ATADevState *s, uint32_t iATAPILBA, uint32_t cSectors, uint32_t cbSector) { Assert(cSectors > 0); s->iATAPILBA = iATAPILBA; s->cbATAPISector = cbSector; ataStartTransfer(s, cSectors * cbSector, PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ, true); return false; } static bool atapiReadCapacitySS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 8); ataH2BE_U32(pbBuf, s->cTotalSectors - 1); ataH2BE_U32(pbBuf + 4, 2048); s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiReadDiscInformationSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 34); memset(pbBuf, '\0', 34); ataH2BE_U16(pbBuf, 32); pbBuf[2] = (0 << 4) | (3 << 2) | (2 << 0); /* not erasable, complete session, complete disc */ pbBuf[3] = 1; /* number of first track */ pbBuf[4] = 1; /* number of sessions (LSB) */ pbBuf[5] = 1; /* first track number in last session (LSB) */ pbBuf[6] = 1; /* last track number in last session (LSB) */ pbBuf[7] = (0 << 7) | (0 << 6) | (1 << 5) | (0 << 2) | (0 << 0); /* disc id not valid, disc bar code not valid, unrestricted use, not dirty, not RW medium */ pbBuf[8] = 0; /* disc type = CD-ROM */ pbBuf[9] = 0; /* number of sessions (MSB) */ pbBuf[10] = 0; /* number of sessions (MSB) */ pbBuf[11] = 0; /* number of sessions (MSB) */ ataH2BE_U32(pbBuf + 16, 0x00ffffff); /* last session lead-in start time is not available */ ataH2BE_U32(pbBuf + 20, 0x00ffffff); /* last possible start time for lead-out is not available */ s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiReadTrackInformationSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 36); /* Accept address/number type of 1 only, and only track 1 exists. */ if ((s->aATAPICmd[1] & 0x03) != 1 || ataBE2H_U32(&s->aATAPICmd[2]) != 1) { atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } memset(pbBuf, '\0', 36); ataH2BE_U16(pbBuf, 34); pbBuf[2] = 1; /* track number (LSB) */ pbBuf[3] = 1; /* session number (LSB) */ pbBuf[5] = (0 << 5) | (0 << 4) | (4 << 0); /* not damaged, primary copy, data track */ pbBuf[6] = (0 << 7) | (0 << 6) | (0 << 5) | (0 << 6) | (1 << 0); /* not reserved track, not blank, not packet writing, not fixed packet, data mode 1 */ pbBuf[7] = (0 << 1) | (0 << 0); /* last recorded address not valid, next recordable address not valid */ ataH2BE_U32(pbBuf + 8, 0); /* track start address is 0 */ ataH2BE_U32(pbBuf + 24, s->cTotalSectors); /* track size */ pbBuf[32] = 0; /* track number (MSB) */ pbBuf[33] = 0; /* session number (MSB) */ s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static size_t atapiGetConfigurationFillFeatureListProfiles(ATADevState *s, uint8_t *pbBuf, size_t cbBuf) { if (cbBuf < 3*4) return 0; ataH2BE_U16(pbBuf, 0x0); /* feature 0: list of profiles supported */ pbBuf[2] = (0 << 2) | (1 << 1) | (1 || 0); /* version 0, persistent, current */ pbBuf[3] = 8; /* additional bytes for profiles */ /* The MMC-3 spec says that DVD-ROM read capability should be reported * before CD-ROM read capability. */ ataH2BE_U16(pbBuf + 4, 0x10); /* profile: read-only DVD */ pbBuf[6] = (0 << 0); /* NOT current profile */ ataH2BE_U16(pbBuf + 8, 0x08); /* profile: read only CD */ pbBuf[10] = (1 << 0); /* current profile */ return 3*4; /* Header + 2 profiles entries */ } static size_t atapiGetConfigurationFillFeatureCore(ATADevState *s, uint8_t *pbBuf, size_t cbBuf) { if (cbBuf < 12) return 0; ataH2BE_U16(pbBuf, 0x1); /* feature 0001h: Core Feature */ pbBuf[2] = (0x2 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 8; /* Additional length */ ataH2BE_U16(pbBuf + 4, 0x00000002); /* Physical interface ATAPI. */ pbBuf[8] = RT_BIT(0); /* DBE */ /* Rest is reserved. */ return 12; } static size_t atapiGetConfigurationFillFeatureMorphing(ATADevState *s, uint8_t *pbBuf, size_t cbBuf) { if (cbBuf < 8) return 0; ataH2BE_U16(pbBuf, 0x2); /* feature 0002h: Morphing Feature */ pbBuf[2] = (0x1 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 4; /* Additional length */ pbBuf[4] = RT_BIT(1) | 0x0; /* OCEvent | !ASYNC */ /* Rest is reserved. */ return 8; } static size_t atapiGetConfigurationFillFeatureRemovableMedium(ATADevState *s, uint8_t *pbBuf, size_t cbBuf) { if (cbBuf < 8) return 0; ataH2BE_U16(pbBuf, 0x3); /* feature 0003h: Removable Medium Feature */ pbBuf[2] = (0x2 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 4; /* Additional length */ /* Tray type loading | Load | Eject | !Pvnt Jmpr | !DBML | Lock */ pbBuf[4] = (0x2 << 5) | RT_BIT(4) | RT_BIT(3) | (0x0 << 2) | (0x0 << 1) | RT_BIT(0); /* Rest is reserved. */ return 8; } static size_t atapiGetConfigurationFillFeatureRandomReadable(ATADevState *s, uint8_t *pbBuf, size_t cbBuf) { if (cbBuf < 12) return 0; ataH2BE_U16(pbBuf, 0x10); /* feature 0010h: Random Readable Feature */ pbBuf[2] = (0x0 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 8; /* Additional length */ ataH2BE_U32(pbBuf + 4, 2048); /* Logical block size. */ ataH2BE_U16(pbBuf + 8, 0x10); /* Blocking (0x10 for DVD, CD is not defined). */ pbBuf[10] = 0; /* PP not present */ /* Rest is reserved. */ return 12; } static size_t atapiGetConfigurationFillFeatureCDRead(ATADevState *s, uint8_t *pbBuf, size_t cbBuf) { if (cbBuf < 8) return 0; ataH2BE_U16(pbBuf, 0x1e); /* feature 001Eh: CD Read Feature */ pbBuf[2] = (0x2 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 0; /* Additional length */ pbBuf[4] = (0x0 << 7) | (0x0 << 1) | 0x0; /* !DAP | !C2-Flags | !CD-Text. */ /* Rest is reserved. */ return 8; } static size_t atapiGetConfigurationFillFeaturePowerManagement(ATADevState *s, uint8_t *pbBuf, size_t cbBuf) { if (cbBuf < 4) return 0; ataH2BE_U16(pbBuf, 0x100); /* feature 0100h: Power Management Feature */ pbBuf[2] = (0x0 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 0; /* Additional length */ return 4; } static size_t atapiGetConfigurationFillFeatureTimeout(ATADevState *s, uint8_t *pbBuf, size_t cbBuf) { if (cbBuf < 8) return 0; ataH2BE_U16(pbBuf, 0x105); /* feature 0105h: Timeout Feature */ pbBuf[2] = (0x0 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 4; /* Additional length */ pbBuf[4] = 0x0; /* !Group3 */ return 8; } static bool atapiGetConfigurationSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); size_t cbBuf = s->cbIOBuffer; size_t cbCopied = 0; uint16_t u16Sfn = ataBE2H_U16(&s->aATAPICmd[2]); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 80); /* Accept valid request types only, and only starting feature 0. */ if ((s->aATAPICmd[1] & 0x03) == 3 || u16Sfn != 0) { atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } memset(pbBuf, '\0', cbBuf); /** @todo implement switching between CD-ROM and DVD-ROM profile (the only * way to differentiate them right now is based on the image size). */ if (s->cTotalSectors) ataH2BE_U16(pbBuf + 6, 0x08); /* current profile: read-only CD */ else ataH2BE_U16(pbBuf + 6, 0x00); /* current profile: none -> no media */ cbBuf -= 8; pbBuf += 8; cbCopied = atapiGetConfigurationFillFeatureListProfiles(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; cbCopied = atapiGetConfigurationFillFeatureCore(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; cbCopied = atapiGetConfigurationFillFeatureMorphing(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; cbCopied = atapiGetConfigurationFillFeatureRemovableMedium(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; cbCopied = atapiGetConfigurationFillFeatureRandomReadable(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; cbCopied = atapiGetConfigurationFillFeatureCDRead(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; cbCopied = atapiGetConfigurationFillFeaturePowerManagement(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; cbCopied = atapiGetConfigurationFillFeatureTimeout(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; /* Set data length now - the field is not included in the final length. */ ataH2BE_U32(s->CTX_SUFF(pbIOBuffer), s->cbIOBuffer - cbBuf - 4); /* Other profiles we might want to add in the future: 0x40 (BD-ROM) and 0x50 (HDDVD-ROM) */ s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiGetEventStatusNotificationSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 8); if (!(s->aATAPICmd[1] & 1)) { /* no asynchronous operation supported */ atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } uint32_t OldStatus, NewStatus; do { OldStatus = ASMAtomicReadU32(&s->MediaEventStatus); NewStatus = ATA_EVENT_STATUS_UNCHANGED; switch (OldStatus) { case ATA_EVENT_STATUS_MEDIA_NEW: /* mount */ ataH2BE_U16(pbBuf + 0, 6); pbBuf[2] = 0x04; /* media */ pbBuf[3] = 0x5e; /* supported = busy|media|external|power|operational */ pbBuf[4] = 0x02; /* new medium */ pbBuf[5] = 0x02; /* medium present / door closed */ pbBuf[6] = 0x00; pbBuf[7] = 0x00; break; case ATA_EVENT_STATUS_MEDIA_CHANGED: case ATA_EVENT_STATUS_MEDIA_REMOVED: /* umount */ ataH2BE_U16(pbBuf + 0, 6); pbBuf[2] = 0x04; /* media */ pbBuf[3] = 0x5e; /* supported = busy|media|external|power|operational */ pbBuf[4] = 0x03; /* media removal */ pbBuf[5] = 0x00; /* medium absent / door closed */ pbBuf[6] = 0x00; pbBuf[7] = 0x00; if (OldStatus == ATA_EVENT_STATUS_MEDIA_CHANGED) NewStatus = ATA_EVENT_STATUS_MEDIA_NEW; break; case ATA_EVENT_STATUS_MEDIA_EJECT_REQUESTED: /* currently unused */ ataH2BE_U16(pbBuf + 0, 6); pbBuf[2] = 0x04; /* media */ pbBuf[3] = 0x5e; /* supported = busy|media|external|power|operational */ pbBuf[4] = 0x01; /* eject requested (eject button pressed) */ pbBuf[5] = 0x02; /* medium present / door closed */ pbBuf[6] = 0x00; pbBuf[7] = 0x00; break; case ATA_EVENT_STATUS_UNCHANGED: default: ataH2BE_U16(pbBuf + 0, 6); pbBuf[2] = 0x01; /* operational change request / notification */ pbBuf[3] = 0x5e; /* supported = busy|media|external|power|operational */ pbBuf[4] = 0x00; pbBuf[5] = 0x00; pbBuf[6] = 0x00; pbBuf[7] = 0x00; break; } } while (!ASMAtomicCmpXchgU32(&s->MediaEventStatus, NewStatus, OldStatus)); s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiInquirySS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 36); pbBuf[0] = 0x05; /* CD-ROM */ pbBuf[1] = 0x80; /* removable */ #if 1/*ndef VBOX*/ /** @todo implement MESN + AENC. (async notification on removal and stuff.) */ pbBuf[2] = 0x00; /* ISO */ pbBuf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */ #else pbBuf[2] = 0x00; /* ISO */ pbBuf[3] = 0x91; /* format 1, MESN=1, AENC=9 ??? */ #endif pbBuf[4] = 31; /* additional length */ pbBuf[5] = 0; /* reserved */ pbBuf[6] = 0; /* reserved */ pbBuf[7] = 0; /* reserved */ ataSCSIPadStr(pbBuf + 8, s->szInquiryVendorId, 8); ataSCSIPadStr(pbBuf + 16, s->szInquiryProductId, 16); ataSCSIPadStr(pbBuf + 32, s->szInquiryRevision, 4); s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiModeSenseErrorRecoverySS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 16); ataH2BE_U16(&pbBuf[0], 16 + 6); pbBuf[2] = (uint8_t)s->MediaTrackType; pbBuf[3] = 0; pbBuf[4] = 0; pbBuf[5] = 0; pbBuf[6] = 0; pbBuf[7] = 0; pbBuf[8] = 0x01; pbBuf[9] = 0x06; pbBuf[10] = 0x00; /* Maximum error recovery */ pbBuf[11] = 0x05; /* 5 retries */ pbBuf[12] = 0x00; pbBuf[13] = 0x00; pbBuf[14] = 0x00; pbBuf[15] = 0x00; s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiModeSenseCDStatusSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 40); ataH2BE_U16(&pbBuf[0], 38); pbBuf[2] = (uint8_t)s->MediaTrackType; pbBuf[3] = 0; pbBuf[4] = 0; pbBuf[5] = 0; pbBuf[6] = 0; pbBuf[7] = 0; pbBuf[8] = 0x2a; pbBuf[9] = 30; /* page length */ pbBuf[10] = 0x08; /* DVD-ROM read support */ pbBuf[11] = 0x00; /* no write support */ /* The following claims we support audio play. This is obviously false, * but the Linux generic CDROM support makes many features depend on this * capability. If it's not set, this causes many things to be disabled. */ pbBuf[12] = 0x71; /* multisession support, mode 2 form 1/2 support, audio play */ pbBuf[13] = 0x00; /* no subchannel reads supported */ pbBuf[14] = (1 << 0) | (1 << 3) | (1 << 5); /* lock supported, eject supported, tray type loading mechanism */ if (s->pDrvMount->pfnIsLocked(s->pDrvMount)) pbBuf[14] |= 1 << 1; /* report lock state */ pbBuf[15] = 0; /* no subchannel reads supported, no separate audio volume control, no changer etc. */ ataH2BE_U16(&pbBuf[16], 5632); /* (obsolete) claim 32x speed support */ ataH2BE_U16(&pbBuf[18], 2); /* number of audio volume levels */ ataH2BE_U16(&pbBuf[20], s->cbIOBuffer / _1K); /* buffer size supported in Kbyte */ ataH2BE_U16(&pbBuf[22], 5632); /* (obsolete) current read speed 32x */ pbBuf[24] = 0; /* reserved */ pbBuf[25] = 0; /* reserved for digital audio (see idx 15) */ ataH2BE_U16(&pbBuf[26], 0); /* (obsolete) maximum write speed */ ataH2BE_U16(&pbBuf[28], 0); /* (obsolete) current write speed */ ataH2BE_U16(&pbBuf[30], 0); /* copy management revision supported 0=no CSS */ pbBuf[32] = 0; /* reserved */ pbBuf[33] = 0; /* reserved */ pbBuf[34] = 0; /* reserved */ pbBuf[35] = 1; /* rotation control CAV */ ataH2BE_U16(&pbBuf[36], 0); /* current write speed */ ataH2BE_U16(&pbBuf[38], 0); /* number of write speed performance descriptors */ s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiRequestSenseSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); memset(pbBuf, '\0', s->cbElementaryTransfer); memcpy(pbBuf, s->abATAPISense, RT_MIN(s->cbElementaryTransfer, sizeof(s->abATAPISense))); s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiMechanismStatusSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 8); ataH2BE_U16(pbBuf, 0); /* no current LBA */ pbBuf[2] = 0; pbBuf[3] = 0; pbBuf[4] = 0; pbBuf[5] = 1; ataH2BE_U16(pbBuf + 6, 0); s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiReadTOCNormalSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer), *q, iStartTrack; bool fMSF; uint32_t cbSize; Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); fMSF = (s->aATAPICmd[1] >> 1) & 1; iStartTrack = s->aATAPICmd[6]; if (iStartTrack > 1 && iStartTrack != 0xaa) { atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } q = pbBuf + 2; *q++ = 1; /* first session */ *q++ = 1; /* last session */ if (iStartTrack <= 1) { *q++ = 0; /* reserved */ *q++ = 0x14; /* ADR, control */ *q++ = 1; /* track number */ *q++ = 0; /* reserved */ if (fMSF) { *q++ = 0; /* reserved */ ataLBA2MSF(q, 0); q += 3; } else { /* sector 0 */ ataH2BE_U32(q, 0); q += 4; } } /* lead out track */ *q++ = 0; /* reserved */ *q++ = 0x14; /* ADR, control */ *q++ = 0xaa; /* track number */ *q++ = 0; /* reserved */ if (fMSF) { *q++ = 0; /* reserved */ ataLBA2MSF(q, s->cTotalSectors); q += 3; } else { ataH2BE_U32(q, s->cTotalSectors); q += 4; } cbSize = q - pbBuf; ataH2BE_U16(pbBuf, cbSize - 2); if (cbSize < s->cbTotalTransfer) s->cbTotalTransfer = cbSize; s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiReadTOCMultiSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer); bool fMSF; Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 12); fMSF = (s->aATAPICmd[1] >> 1) & 1; /* multi session: only a single session defined */ /** @todo double-check this stuff against what a real drive says for a CD-ROM (not a CD-R) with only a single data session. Maybe solve the problem with "cdrdao read-toc" not being able to figure out whether numbers are in BCD or hex. */ memset(pbBuf, 0, 12); pbBuf[1] = 0x0a; pbBuf[2] = 0x01; pbBuf[3] = 0x01; pbBuf[5] = 0x14; /* ADR, control */ pbBuf[6] = 1; /* first track in last complete session */ if (fMSF) { pbBuf[8] = 0; /* reserved */ ataLBA2MSF(&pbBuf[9], 0); } else { /* sector 0 */ ataH2BE_U32(pbBuf + 8, 0); } s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static bool atapiReadTOCRawSS(ATADevState *s) { uint8_t *pbBuf = s->CTX_SUFF(pbIOBuffer), *q, iStartTrack; bool fMSF; uint32_t cbSize; Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); fMSF = (s->aATAPICmd[1] >> 1) & 1; iStartTrack = s->aATAPICmd[6]; q = pbBuf + 2; *q++ = 1; /* first session */ *q++ = 1; /* last session */ *q++ = 1; /* session number */ *q++ = 0x14; /* data track */ *q++ = 0; /* track number */ *q++ = 0xa0; /* first track in program area */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ *q++ = 0; *q++ = 1; /* first track */ *q++ = 0x00; /* disk type CD-DA or CD data */ *q++ = 0; *q++ = 1; /* session number */ *q++ = 0x14; /* data track */ *q++ = 0; /* track number */ *q++ = 0xa1; /* last track in program area */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ *q++ = 0; *q++ = 1; /* last track */ *q++ = 0; *q++ = 0; *q++ = 1; /* session number */ *q++ = 0x14; /* data track */ *q++ = 0; /* track number */ *q++ = 0xa2; /* lead-out */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ if (fMSF) { *q++ = 0; /* reserved */ ataLBA2MSF(q, s->cTotalSectors); q += 3; } else { ataH2BE_U32(q, s->cTotalSectors); q += 4; } *q++ = 1; /* session number */ *q++ = 0x14; /* ADR, control */ *q++ = 0; /* track number */ *q++ = 1; /* point */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ if (fMSF) { *q++ = 0; /* reserved */ ataLBA2MSF(q, 0); q += 3; } else { /* sector 0 */ ataH2BE_U32(q, 0); q += 4; } cbSize = q - pbBuf; ataH2BE_U16(pbBuf, cbSize - 2); if (cbSize < s->cbTotalTransfer) s->cbTotalTransfer = cbSize; s->iSourceSink = ATAFN_SS_NULL; atapiCmdOK(s); return false; } static void atapiParseCmdVirtualATAPI(ATADevState *s) { const uint8_t *pbPacket; uint8_t *pbBuf; uint32_t cbMax; pbPacket = s->aATAPICmd; pbBuf = s->CTX_SUFF(pbIOBuffer); switch (pbPacket[0]) { case SCSI_TEST_UNIT_READY: if (s->cNotifiedMediaChange > 0) { if (s->cNotifiedMediaChange-- > 2) atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); else atapiCmdErrorSimple(s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ } else if (s->pDrvMount->pfnIsMounted(s->pDrvMount)) atapiCmdOK(s); else atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; case SCSI_GET_EVENT_STATUS_NOTIFICATION: cbMax = ataBE2H_U16(pbPacket + 7); ataStartTransfer(s, RT_MIN(cbMax, 8), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_GET_EVENT_STATUS_NOTIFICATION, true); break; case SCSI_MODE_SENSE_10: { uint8_t uPageControl, uPageCode; cbMax = ataBE2H_U16(pbPacket + 7); uPageControl = pbPacket[2] >> 6; uPageCode = pbPacket[2] & 0x3f; switch (uPageControl) { case SCSI_PAGECONTROL_CURRENT: switch (uPageCode) { case SCSI_MODEPAGE_ERROR_RECOVERY: ataStartTransfer(s, RT_MIN(cbMax, 16), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_MODE_SENSE_ERROR_RECOVERY, true); break; case SCSI_MODEPAGE_CD_STATUS: ataStartTransfer(s, RT_MIN(cbMax, 40), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_MODE_SENSE_CD_STATUS, true); break; default: goto error_cmd; } break; case SCSI_PAGECONTROL_CHANGEABLE: goto error_cmd; case SCSI_PAGECONTROL_DEFAULT: goto error_cmd; default: case SCSI_PAGECONTROL_SAVED: atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED); break; } } break; case SCSI_REQUEST_SENSE: cbMax = pbPacket[4]; ataStartTransfer(s, RT_MIN(cbMax, 18), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_REQUEST_SENSE, true); break; case SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL: if (s->pDrvMount->pfnIsMounted(s->pDrvMount)) { if (pbPacket[4] & 1) s->pDrvMount->pfnLock(s->pDrvMount); else s->pDrvMount->pfnUnlock(s->pDrvMount); atapiCmdOK(s); } else atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; case SCSI_READ_10: case SCSI_READ_12: { uint32_t cSectors, iATAPILBA; if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiCmdErrorSimple(s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!s->pDrvMount->pfnIsMounted(s->pDrvMount)) { atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } if (pbPacket[0] == SCSI_READ_10) cSectors = ataBE2H_U16(pbPacket + 7); else cSectors = ataBE2H_U32(pbPacket + 6); iATAPILBA = ataBE2H_U32(pbPacket + 2); if (cSectors == 0) { atapiCmdOK(s); break; } if ((uint64_t)iATAPILBA + cSectors > s->cTotalSectors) { /* Rate limited logging, one log line per second. For * guests that insist on reading from places outside the * valid area this often generates too many release log * entries otherwise. */ static uint64_t uLastLogTS = 0; if (RTTimeMilliTS() >= uLastLogTS + 1000) { LogRel(("PIIX3 ATA: LUN#%d: CD-ROM block number %Ld invalid (READ)\n", s->iLUN, (uint64_t)iATAPILBA + cSectors)); uLastLogTS = RTTimeMilliTS(); } atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_LOGICAL_BLOCK_OOR); break; } atapiReadSectors(s, iATAPILBA, cSectors, 2048); } break; case SCSI_READ_CD: { uint32_t cSectors, iATAPILBA; if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiCmdErrorSimple(s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!s->pDrvMount->pfnIsMounted(s->pDrvMount)) { atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cSectors = (pbPacket[6] << 16) | (pbPacket[7] << 8) | pbPacket[8]; iATAPILBA = ataBE2H_U32(pbPacket + 2); if (cSectors == 0) { atapiCmdOK(s); break; } if ((uint64_t)iATAPILBA + cSectors > s->cTotalSectors) { /* Rate limited logging, one log line per second. For * guests that insist on reading from places outside the * valid area this often generates too many release log * entries otherwise. */ static uint64_t uLastLogTS = 0; if (RTTimeMilliTS() >= uLastLogTS + 1000) { LogRel(("PIIX3 ATA: LUN#%d: CD-ROM block number %Ld invalid (READ CD)\n", s->iLUN, (uint64_t)iATAPILBA + cSectors)); uLastLogTS = RTTimeMilliTS(); } atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_LOGICAL_BLOCK_OOR); break; } switch (pbPacket[9] & 0xf8) { case 0x00: /* nothing */ atapiCmdOK(s); break; case 0x10: /* normal read */ atapiReadSectors(s, iATAPILBA, cSectors, 2048); break; case 0xf8: /* read all data */ atapiReadSectors(s, iATAPILBA, cSectors, 2352); break; default: LogRel(("PIIX3 ATA: LUN#%d: CD-ROM sector format not supported (%#x)\n", s->iLUN, pbPacket[9] & 0xf8)); atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); break; } } break; case SCSI_SEEK_10: { uint32_t iATAPILBA; if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiCmdErrorSimple(s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!s->pDrvMount->pfnIsMounted(s->pDrvMount)) { atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } iATAPILBA = ataBE2H_U32(pbPacket + 2); if (iATAPILBA > s->cTotalSectors) { /* Rate limited logging, one log line per second. For * guests that insist on seeking to places outside the * valid area this often generates too many release log * entries otherwise. */ static uint64_t uLastLogTS = 0; if (RTTimeMilliTS() >= uLastLogTS + 1000) { LogRel(("PIIX3 ATA: LUN#%d: CD-ROM block number %Ld invalid (SEEK)\n", s->iLUN, (uint64_t)iATAPILBA)); uLastLogTS = RTTimeMilliTS(); } atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_LOGICAL_BLOCK_OOR); break; } atapiCmdOK(s); ataSetStatus(s, ATA_STAT_SEEK); /* Linux expects this. */ } break; case SCSI_START_STOP_UNIT: { int rc = VINF_SUCCESS; switch (pbPacket[4] & 3) { case 0: /* 00 - Stop motor */ case 1: /* 01 - Start motor */ break; case 2: /* 10 - Eject media */ { /* This must be done from EMT. */ PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); PPDMDEVINS pDevIns = ATADEVSTATE_2_DEVINS(s); PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PDMCritSectLeave(&pCtl->lock); rc = VMR3ReqPriorityCallWait(PDMDevHlpGetVM(pDevIns), VMCPUID_ANY, (PFNRT)s->pDrvMount->pfnUnmount, 3, s->pDrvMount, false /*=fForce*/, true /*=fEject*/); Assert(RT_SUCCESS(rc) || (rc == VERR_PDM_MEDIA_LOCKED) || (rc = VERR_PDM_MEDIA_NOT_MOUNTED)); if (RT_SUCCESS(rc) && pThis->pMediaNotify) { rc = VMR3ReqCallNoWait(PDMDevHlpGetVM(pDevIns), VMCPUID_ANY, (PFNRT)pThis->pMediaNotify->pfnEjected, 2, pThis->pMediaNotify, s->iLUN); AssertRC(rc); } { STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); } break; } case 3: /* 11 - Load media */ /** @todo rc = s->pDrvMount->pfnLoadMedia(s->pDrvMount) */ break; } if (RT_SUCCESS(rc)) atapiCmdOK(s); else atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED); } break; case SCSI_MECHANISM_STATUS: { cbMax = ataBE2H_U16(pbPacket + 8); ataStartTransfer(s, RT_MIN(cbMax, 8), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_MECHANISM_STATUS, true); } break; case SCSI_READ_TOC_PMA_ATIP: { uint8_t format; if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiCmdErrorSimple(s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!s->pDrvMount->pfnIsMounted(s->pDrvMount)) { atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cbMax = ataBE2H_U16(pbPacket + 7); /* SCSI MMC-3 spec says format is at offset 2 (lower 4 bits), * but Linux kernel uses offset 9 (topmost 2 bits). Hope that * the other field is clear... */ format = (pbPacket[2] & 0xf) | (pbPacket[9] >> 6); switch (format) { case 0: ataStartTransfer(s, cbMax, PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_TOC_NORMAL, true); break; case 1: ataStartTransfer(s, RT_MIN(cbMax, 12), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_TOC_MULTI, true); break; case 2: ataStartTransfer(s, cbMax, PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_TOC_RAW, true); break; default: error_cmd: atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); break; } } break; case SCSI_READ_CAPACITY: if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiCmdErrorSimple(s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!s->pDrvMount->pfnIsMounted(s->pDrvMount)) { atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } ataStartTransfer(s, 8, PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_CAPACITY, true); break; case SCSI_READ_DISC_INFORMATION: if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiCmdErrorSimple(s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!s->pDrvMount->pfnIsMounted(s->pDrvMount)) { atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cbMax = ataBE2H_U16(pbPacket + 7); ataStartTransfer(s, RT_MIN(cbMax, 34), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_DISC_INFORMATION, true); break; case SCSI_READ_TRACK_INFORMATION: if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiCmdErrorSimple(s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!s->pDrvMount->pfnIsMounted(s->pDrvMount)) { atapiCmdErrorSimple(s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cbMax = ataBE2H_U16(pbPacket + 7); ataStartTransfer(s, RT_MIN(cbMax, 36), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_TRACK_INFORMATION, true); break; case SCSI_GET_CONFIGURATION: /* No media change stuff here, it can confuse Linux guests. */ cbMax = ataBE2H_U16(pbPacket + 7); ataStartTransfer(s, RT_MIN(cbMax, 80), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_GET_CONFIGURATION, true); break; case SCSI_INQUIRY: cbMax = ataBE2H_U16(pbPacket + 3); ataStartTransfer(s, RT_MIN(cbMax, 36), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_INQUIRY, true); break; case SCSI_READ_DVD_STRUCTURE: { cbMax = ataBE2H_U16(pbPacket + 8); ataStartTransfer(s, RT_MIN(cbMax, 4), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_DVD_STRUCTURE, true); break; } default: atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_ILLEGAL_OPCODE); break; } } /* * Parse ATAPI commands, passing them directly to the CD/DVD drive. */ static void atapiParseCmdPassthrough(ATADevState *s) { const uint8_t *pbPacket; uint8_t *pbBuf; uint32_t cSectors, iATAPILBA; uint32_t cbTransfer = 0; PDMBLOCKTXDIR uTxDir = PDMBLOCKTXDIR_NONE; pbPacket = s->aATAPICmd; pbBuf = s->CTX_SUFF(pbIOBuffer); switch (pbPacket[0]) { case SCSI_BLANK: goto sendcmd; case SCSI_CLOSE_TRACK_SESSION: goto sendcmd; case SCSI_ERASE_10: iATAPILBA = ataBE2H_U32(pbPacket + 2); cbTransfer = ataBE2H_U16(pbPacket + 7); Log2(("ATAPI PT: lba %d\n", iATAPILBA)); uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_FORMAT_UNIT: cbTransfer = s->uATARegLCyl | (s->uATARegHCyl << 8); /* use ATAPI transfer length */ uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_GET_CONFIGURATION: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_GET_EVENT_STATUS_NOTIFICATION: cbTransfer = ataBE2H_U16(pbPacket + 7); if (ASMAtomicReadU32(&s->MediaEventStatus) != ATA_EVENT_STATUS_UNCHANGED) { ataStartTransfer(s, RT_MIN(cbTransfer, 8), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_GET_EVENT_STATUS_NOTIFICATION, true); break; } uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_GET_PERFORMANCE: cbTransfer = s->uATARegLCyl | (s->uATARegHCyl << 8); /* use ATAPI transfer length */ uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_INQUIRY: cbTransfer = ataBE2H_U16(pbPacket + 3); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_LOAD_UNLOAD_MEDIUM: goto sendcmd; case SCSI_MECHANISM_STATUS: cbTransfer = ataBE2H_U16(pbPacket + 8); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_MODE_SELECT_10: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_MODE_SENSE_10: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_PAUSE_RESUME: goto sendcmd; case SCSI_PLAY_AUDIO_10: goto sendcmd; case SCSI_PLAY_AUDIO_12: goto sendcmd; case SCSI_PLAY_AUDIO_MSF: goto sendcmd; case SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL: /** @todo do not forget to unlock when a VM is shut down */ goto sendcmd; case SCSI_READ_10: iATAPILBA = ataBE2H_U32(pbPacket + 2); cSectors = ataBE2H_U16(pbPacket + 7); Log2(("ATAPI PT: lba %d sectors %d\n", iATAPILBA, cSectors)); s->cbATAPISector = 2048; cbTransfer = cSectors * s->cbATAPISector; uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_12: iATAPILBA = ataBE2H_U32(pbPacket + 2); cSectors = ataBE2H_U32(pbPacket + 6); Log2(("ATAPI PT: lba %d sectors %d\n", iATAPILBA, cSectors)); s->cbATAPISector = 2048; cbTransfer = cSectors * s->cbATAPISector; uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_BUFFER: cbTransfer = ataBE2H_U24(pbPacket + 6); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_BUFFER_CAPACITY: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_CAPACITY: cbTransfer = 8; uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_CD: case SCSI_READ_CD_MSF: { /* Get sector size based on the expected sector type field. */ switch ((pbPacket[1] >> 2) & 0x7) { case 0x0: /* All types. */ { uint32_t iLbaStart; if (pbPacket[0] == SCSI_READ_CD) iLbaStart = ataBE2H_U32(&pbPacket[2]); else iLbaStart = ataMSF2LBA(&pbPacket[3]); if (s->pTrackList) s->cbATAPISector = ATAPIPassthroughTrackListGetSectorSizeFromLba(s->pTrackList, iLbaStart); else s->cbATAPISector = 2048; /* Might be incorrect if we couldn't determine the type. */ break; } case 0x1: /* CD-DA */ s->cbATAPISector = 2352; break; case 0x2: /* Mode 1 */ s->cbATAPISector = 2048; break; case 0x3: /* Mode 2 formless */ s->cbATAPISector = 2336; break; case 0x4: /* Mode 2 form 1 */ s->cbATAPISector = 2048; break; case 0x5: /* Mode 2 form 2 */ s->cbATAPISector = 2324; break; default: /* Reserved */ AssertMsgFailed(("Unknown sector type\n")); s->cbATAPISector = 0; /** @todo we should probably fail the command here already. */ } if (pbPacket[0] == SCSI_READ_CD) cbTransfer = ataBE2H_U24(pbPacket + 6) * s->cbATAPISector; else /* SCSI_READ_MSF */ { cSectors = ataMSF2LBA(pbPacket + 6) - ataMSF2LBA(pbPacket + 3); if (cSectors > 32) cSectors = 32; /* Limit transfer size to 64~74K. Safety first. In any case this can only harm software doing CDDA extraction. */ cbTransfer = cSectors * s->cbATAPISector; } uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; } case SCSI_READ_DISC_INFORMATION: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_DVD_STRUCTURE: cbTransfer = ataBE2H_U16(pbPacket + 8); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_FORMAT_CAPACITIES: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_SUBCHANNEL: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_TOC_PMA_ATIP: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_READ_TRACK_INFORMATION: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_REPAIR_TRACK: goto sendcmd; case SCSI_REPORT_KEY: cbTransfer = ataBE2H_U16(pbPacket + 8); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_REQUEST_SENSE: cbTransfer = pbPacket[4]; if ((s->abATAPISense[2] & 0x0f) != SCSI_SENSE_NONE) { ataStartTransfer(s, RT_MIN(cbTransfer, 18), PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_REQUEST_SENSE, true); break; } uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_RESERVE_TRACK: goto sendcmd; case SCSI_SCAN: goto sendcmd; case SCSI_SEEK_10: goto sendcmd; case SCSI_SEND_CUE_SHEET: cbTransfer = ataBE2H_U24(pbPacket + 6); uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_SEND_DVD_STRUCTURE: cbTransfer = ataBE2H_U16(pbPacket + 8); uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_SEND_EVENT: cbTransfer = ataBE2H_U16(pbPacket + 8); uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_SEND_KEY: cbTransfer = ataBE2H_U16(pbPacket + 8); uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_SEND_OPC_INFORMATION: cbTransfer = ataBE2H_U16(pbPacket + 7); uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_SET_CD_SPEED: goto sendcmd; case SCSI_SET_READ_AHEAD: goto sendcmd; case SCSI_SET_STREAMING: cbTransfer = ataBE2H_U16(pbPacket + 9); uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_START_STOP_UNIT: goto sendcmd; case SCSI_STOP_PLAY_SCAN: goto sendcmd; case SCSI_SYNCHRONIZE_CACHE: goto sendcmd; case SCSI_TEST_UNIT_READY: goto sendcmd; case SCSI_VERIFY_10: goto sendcmd; case SCSI_WRITE_10: case SCSI_WRITE_AND_VERIFY_10: iATAPILBA = ataBE2H_U32(pbPacket + 2); cSectors = ataBE2H_U16(pbPacket + 7); if (s->pTrackList) s->cbATAPISector = ATAPIPassthroughTrackListGetSectorSizeFromLba(s->pTrackList, iATAPILBA); else s->cbATAPISector = 2048; Log2(("ATAPI PT: lba %d sectors %d sector size %d\n", iATAPILBA, cSectors, s->cbATAPISector)); cbTransfer = cSectors * s->cbATAPISector; uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_WRITE_12: iATAPILBA = ataBE2H_U32(pbPacket + 2); cSectors = ataBE2H_U32(pbPacket + 6); if (s->pTrackList) s->cbATAPISector = ATAPIPassthroughTrackListGetSectorSizeFromLba(s->pTrackList, iATAPILBA); else s->cbATAPISector = 2048; Log2(("ATAPI PT: lba %d sectors %d sector size %d\n", iATAPILBA, cSectors, s->cbATAPISector)); cbTransfer = cSectors * s->cbATAPISector; uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; case SCSI_WRITE_BUFFER: switch (pbPacket[1] & 0x1f) { case 0x04: /* download microcode */ case 0x05: /* download microcode and save */ case 0x06: /* download microcode with offsets */ case 0x07: /* download microcode with offsets and save */ case 0x0e: /* download microcode with offsets and defer activation */ case 0x0f: /* activate deferred microcode */ LogRel(("PIIX3 ATA: LUN#%d: CD-ROM passthrough command attempted to update firmware, blocked\n", s->iLUN)); atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); break; default: cbTransfer = ataBE2H_U16(pbPacket + 6); uTxDir = PDMBLOCKTXDIR_TO_DEVICE; goto sendcmd; } break; case SCSI_REPORT_LUNS: /* Not part of MMC-3, but used by Windows. */ cbTransfer = ataBE2H_U32(pbPacket + 6); uTxDir = PDMBLOCKTXDIR_FROM_DEVICE; goto sendcmd; case SCSI_REZERO_UNIT: /* Obsolete command used by cdrecord. What else would one expect? * This command is not sent to the drive, it is handled internally, * as the Linux kernel doesn't like it (message "scsi: unknown * opcode 0x01" in syslog) and replies with a sense code of 0, * which sends cdrecord to an endless loop. */ atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_ILLEGAL_OPCODE); break; default: LogRel(("PIIX3 ATA: LUN#%d: passthrough unimplemented for command %#x\n", s->iLUN, pbPacket[0])); atapiCmdErrorSimple(s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_ILLEGAL_OPCODE); break; sendcmd: /* * Send a command to the drive, passing data in/out as required. * Commands which exceed the I/O buffer size are splitted below * or aborted if splitting is not implemented. */ Log2(("ATAPI PT: max size %d\n", cbTransfer)); if (cbTransfer == 0) uTxDir = PDMBLOCKTXDIR_NONE; ataStartTransfer(s, cbTransfer, uTxDir, ATAFN_BT_ATAPI_PASSTHROUGH_CMD, ATAFN_SS_ATAPI_PASSTHROUGH, true); } } static void atapiParseCmd(ATADevState *s) { const uint8_t *pbPacket; pbPacket = s->aATAPICmd; #ifdef DEBUG Log(("%s: LUN#%d DMA=%d CMD=%#04x \"%s\"\n", __FUNCTION__, s->iLUN, s->fDMA, pbPacket[0], SCSICmdText(pbPacket[0]))); #else /* !DEBUG */ Log(("%s: LUN#%d DMA=%d CMD=%#04x\n", __FUNCTION__, s->iLUN, s->fDMA, pbPacket[0])); #endif /* !DEBUG */ Log2(("%s: limit=%#x packet: %.*Rhxs\n", __FUNCTION__, s->uATARegLCyl | (s->uATARegHCyl << 8), ATAPI_PACKET_SIZE, pbPacket)); if (s->fATAPIPassthrough) atapiParseCmdPassthrough(s); else atapiParseCmdVirtualATAPI(s); } static bool ataPacketSS(ATADevState *s) { s->fDMA = !!(s->uATARegFeature & 1); memcpy(s->aATAPICmd, s->CTX_SUFF(pbIOBuffer), ATAPI_PACKET_SIZE); s->uTxDir = PDMBLOCKTXDIR_NONE; s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; atapiParseCmd(s); return false; } /** * SCSI_GET_EVENT_STATUS_NOTIFICATION should return "medium removed" event * from now on, regardless if there was a medium inserted or not. */ static void ataMediumRemoved(ATADevState *s) { ASMAtomicWriteU32(&s->MediaEventStatus, ATA_EVENT_STATUS_MEDIA_REMOVED); } /** * SCSI_GET_EVENT_STATUS_NOTIFICATION should return "medium inserted". If * there was already a medium inserted, don't forget to send the "medium * removed" event first. */ static void ataMediumInserted(ATADevState *s) { uint32_t OldStatus, NewStatus; do { OldStatus = ASMAtomicReadU32(&s->MediaEventStatus); switch (OldStatus) { case ATA_EVENT_STATUS_MEDIA_CHANGED: case ATA_EVENT_STATUS_MEDIA_REMOVED: /* no change, we will send "medium removed" + "medium inserted" */ NewStatus = ATA_EVENT_STATUS_MEDIA_CHANGED; break; default: NewStatus = ATA_EVENT_STATUS_MEDIA_NEW; break; } } while (!ASMAtomicCmpXchgU32(&s->MediaEventStatus, NewStatus, OldStatus)); } /** * Called when a media is mounted. * * @param pInterface Pointer to the interface structure containing the called function pointer. */ static DECLCALLBACK(void) ataMountNotify(PPDMIMOUNTNOTIFY pInterface) { ATADevState *pIf = PDMIMOUNTNOTIFY_2_ATASTATE(pInterface); Log(("%s: changing LUN#%d\n", __FUNCTION__, pIf->iLUN)); /* Ignore the call if we're called while being attached. */ if (!pIf->pDrvBlock) return; if (pIf->fATAPI) pIf->cTotalSectors = pIf->pDrvBlock->pfnGetSize(pIf->pDrvBlock) / 2048; else pIf->cTotalSectors = pIf->pDrvBlock->pfnGetSize(pIf->pDrvBlock) / 512; LogRel(("PIIX3 ATA: LUN#%d: CD/DVD, total number of sectors %Ld, passthrough unchanged\n", pIf->iLUN, pIf->cTotalSectors)); /* Report media changed in TEST UNIT and other (probably incorrect) places. */ if (pIf->cNotifiedMediaChange < 2) pIf->cNotifiedMediaChange = 1; ataMediumInserted(pIf); ataMediumTypeSet(pIf, ATA_MEDIA_TYPE_UNKNOWN); } /** * Called when a media is unmounted * @param pInterface Pointer to the interface structure containing the called function pointer. */ static DECLCALLBACK(void) ataUnmountNotify(PPDMIMOUNTNOTIFY pInterface) { ATADevState *pIf = PDMIMOUNTNOTIFY_2_ATASTATE(pInterface); Log(("%s:\n", __FUNCTION__)); pIf->cTotalSectors = 0; /* * Whatever I do, XP will not use the GET MEDIA STATUS nor the EVENT stuff. * However, it will respond to TEST UNIT with a 0x6 0x28 (media changed) sense code. * So, we'll give it 4 TEST UNIT command to catch up, two which the media is not * present and 2 in which it is changed. */ pIf->cNotifiedMediaChange = 1; ataMediumRemoved(pIf); ataMediumTypeSet(pIf, ATA_MEDIA_NO_DISC); } static void ataPacketBT(ATADevState *s) { s->cbElementaryTransfer = s->cbTotalTransfer; s->uATARegNSector = (s->uATARegNSector & ~7) | ATAPI_INT_REASON_CD; Log2(("%s: interrupt reason %#04x\n", __FUNCTION__, s->uATARegNSector)); ataSetStatusValue(s, ATA_STAT_READY); } static void ataResetDevice(ATADevState *s) { s->cMultSectors = ATA_MAX_MULT_SECTORS; s->cNotifiedMediaChange = 0; ASMAtomicWriteU32(&s->MediaEventStatus, ATA_EVENT_STATUS_UNCHANGED); ASMAtomicWriteU32(&s->MediaTrackType, ATA_MEDIA_TYPE_UNKNOWN); ataUnsetIRQ(s); s->uATARegSelect = 0x20; ataSetStatusValue(s, ATA_STAT_READY); ataSetSignature(s); s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->iIOBufferPIODataStart = 0; s->iIOBufferPIODataEnd = 0; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; s->fDMA = false; s->fATAPITransfer = false; s->uATATransferMode = ATA_MODE_UDMA | 2; /* PIIX3 supports only up to UDMA2 */ s->uATARegFeature = 0; } static bool ataExecuteDeviceDiagnosticSS(ATADevState *s) { ataSetSignature(s); if (s->fATAPI) ataSetStatusValue(s, 0); /* NOTE: READY is _not_ set */ else ataSetStatusValue(s, ATA_STAT_READY | ATA_STAT_SEEK); s->uATARegError = 0x01; return false; } static int ataTrimSectors(ATADevState *s, uint64_t u64Sector, uint32_t cSectors, bool *pfRedo) { RTRANGE TrimRange; PATACONTROLLER pCtl = ATADEVSTATE_2_CONTROLLER(s); int rc; PDMCritSectLeave(&pCtl->lock); TrimRange.offStart = u64Sector * 512; TrimRange.cbRange = cSectors * 512; s->Led.Asserted.s.fWriting = s->Led.Actual.s.fWriting = 1; rc = s->pDrvBlock->pfnDiscard(s->pDrvBlock, &TrimRange, 1); s->Led.Actual.s.fWriting = 0; if (RT_SUCCESS(rc)) *pfRedo = false; else *pfRedo = ataIsRedoSetWarning(s, rc); STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); return rc; } static bool ataTrimSS(ATADevState *s) { int rc = VERR_GENERAL_FAILURE; uint32_t cRangesMax; uint64_t *pu64Range = (uint64_t *)s->CTX_SUFF(pbIOBuffer); bool fRedo = false; cRangesMax = s->cbElementaryTransfer / sizeof(uint64_t); Assert(cRangesMax); while (cRangesMax-- > 0) { if (ATA_RANGE_LENGTH_GET(*pu64Range) == 0) break; rc = ataTrimSectors(s, *pu64Range & ATA_RANGE_LBA_MASK, ATA_RANGE_LENGTH_GET(*pu64Range), &fRedo); if (RT_FAILURE(rc)) break; pu64Range++; } if (RT_SUCCESS(rc)) { s->iSourceSink = ATAFN_SS_NULL; ataCmdOK(s, ATA_STAT_SEEK); } else { if (fRedo) return fRedo; if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: disk trim error (rc=%Rrc iSector=%#RX64 cSectors=%#RX32)\n", s->iLUN, rc, *pu64Range & ATA_RANGE_LBA_MASK, ATA_RANGE_LENGTH_GET(*pu64Range))); /* * Check if we got interrupted. We don't need to set status variables * because the request was aborted. */ if (rc != VERR_INTERRUPTED) ataCmdError(s, ID_ERR); } return false; } static void ataParseCmd(ATADevState *s, uint8_t cmd) { #ifdef DEBUG Log(("%s: LUN#%d CMD=%#04x \"%s\"\n", __FUNCTION__, s->iLUN, cmd, ATACmdText(cmd))); #else /* !DEBUG */ Log(("%s: LUN#%d CMD=%#04x\n", __FUNCTION__, s->iLUN, cmd)); #endif /* !DEBUG */ s->fLBA48 = false; s->fDMA = false; if (cmd == ATA_IDLE_IMMEDIATE) { /* Detect Linux timeout recovery, first tries IDLE IMMEDIATE (which * would overwrite the failing command unfortunately), then RESET. */ int32_t uCmdWait = -1; uint64_t uNow = RTTimeNanoTS(); if (s->u64CmdTS) uCmdWait = (uNow - s->u64CmdTS) / 1000; LogRel(("PIIX3 ATA: LUN#%d: IDLE IMMEDIATE, CmdIf=%#04x (%d usec ago)\n", s->iLUN, s->uATARegCommand, uCmdWait)); } s->uATARegCommand = cmd; switch (cmd) { case ATA_IDENTIFY_DEVICE: if (s->pDrvBlock && !s->fATAPI) ataStartTransfer(s, 512, PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_NULL, ATAFN_SS_IDENTIFY, false); else { if (s->fATAPI) ataSetSignature(s); ataCmdError(s, ABRT_ERR); ataUnsetStatus(s, ATA_STAT_READY); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ } break; case ATA_RECALIBRATE: if (s->fATAPI) goto abort_cmd; /* fall through */ case ATA_INITIALIZE_DEVICE_PARAMETERS: ataCmdOK(s, ATA_STAT_SEEK); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case ATA_SET_MULTIPLE_MODE: if ( s->uATARegNSector != 0 && ( s->uATARegNSector > ATA_MAX_MULT_SECTORS || (s->uATARegNSector & (s->uATARegNSector - 1)) != 0)) { ataCmdError(s, ABRT_ERR); } else { Log2(("%s: set multi sector count to %d\n", __FUNCTION__, s->uATARegNSector)); s->cMultSectors = s->uATARegNSector; ataCmdOK(s, 0); } ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case ATA_READ_VERIFY_SECTORS_EXT: s->fLBA48 = true; case ATA_READ_VERIFY_SECTORS: case ATA_READ_VERIFY_SECTORS_WITHOUT_RETRIES: /* do sector number check ? */ ataCmdOK(s, ATA_STAT_SEEK); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case ATA_READ_SECTORS_EXT: s->fLBA48 = true; case ATA_READ_SECTORS: case ATA_READ_SECTORS_WITHOUT_RETRIES: if (!s->pDrvBlock || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = 1; ataStartTransfer(s, ataGetNSectors(s) * 512, PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_READ_SECTORS, false); break; case ATA_WRITE_SECTORS_EXT: s->fLBA48 = true; case ATA_WRITE_SECTORS: case ATA_WRITE_SECTORS_WITHOUT_RETRIES: if (!s->pDrvBlock || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = 1; ataStartTransfer(s, ataGetNSectors(s) * 512, PDMBLOCKTXDIR_TO_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_WRITE_SECTORS, false); break; case ATA_READ_MULTIPLE_EXT: s->fLBA48 = true; case ATA_READ_MULTIPLE: if (!s->pDrvBlock || !s->cMultSectors || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = s->cMultSectors; ataStartTransfer(s, ataGetNSectors(s) * 512, PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_READ_SECTORS, false); break; case ATA_WRITE_MULTIPLE_EXT: s->fLBA48 = true; case ATA_WRITE_MULTIPLE: if (!s->pDrvBlock || !s->cMultSectors || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = s->cMultSectors; ataStartTransfer(s, ataGetNSectors(s) * 512, PDMBLOCKTXDIR_TO_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_WRITE_SECTORS, false); break; case ATA_READ_DMA_EXT: s->fLBA48 = true; case ATA_READ_DMA: case ATA_READ_DMA_WITHOUT_RETRIES: if (!s->pDrvBlock || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = ATA_MAX_MULT_SECTORS; s->fDMA = true; ataStartTransfer(s, ataGetNSectors(s) * 512, PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_READ_SECTORS, false); break; case ATA_WRITE_DMA_EXT: s->fLBA48 = true; case ATA_WRITE_DMA: case ATA_WRITE_DMA_WITHOUT_RETRIES: if (!s->pDrvBlock || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = ATA_MAX_MULT_SECTORS; s->fDMA = true; ataStartTransfer(s, ataGetNSectors(s) * 512, PDMBLOCKTXDIR_TO_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_WRITE_SECTORS, false); break; case ATA_READ_NATIVE_MAX_ADDRESS_EXT: s->fLBA48 = true; ataSetSector(s, s->cTotalSectors - 1); ataCmdOK(s, 0); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case ATA_SEEK: /* Used by the SCO OpenServer. Command is marked as obsolete */ ataCmdOK(s, 0); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case ATA_READ_NATIVE_MAX_ADDRESS: ataSetSector(s, RT_MIN(s->cTotalSectors, 1 << 28) - 1); ataCmdOK(s, 0); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case ATA_CHECK_POWER_MODE: s->uATARegNSector = 0xff; /* drive active or idle */ ataCmdOK(s, 0); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case ATA_SET_FEATURES: Log2(("%s: feature=%#x\n", __FUNCTION__, s->uATARegFeature)); if (!s->pDrvBlock) goto abort_cmd; switch (s->uATARegFeature) { case 0x02: /* write cache enable */ Log2(("%s: write cache enable\n", __FUNCTION__)); ataCmdOK(s, ATA_STAT_SEEK); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case 0xaa: /* read look-ahead enable */ Log2(("%s: read look-ahead enable\n", __FUNCTION__)); ataCmdOK(s, ATA_STAT_SEEK); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case 0x55: /* read look-ahead disable */ Log2(("%s: read look-ahead disable\n", __FUNCTION__)); ataCmdOK(s, ATA_STAT_SEEK); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case 0xcc: /* reverting to power-on defaults enable */ Log2(("%s: revert to power-on defaults enable\n", __FUNCTION__)); ataCmdOK(s, ATA_STAT_SEEK); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case 0x66: /* reverting to power-on defaults disable */ Log2(("%s: revert to power-on defaults disable\n", __FUNCTION__)); ataCmdOK(s, ATA_STAT_SEEK); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case 0x82: /* write cache disable */ Log2(("%s: write cache disable\n", __FUNCTION__)); /* As per the ATA/ATAPI-6 specs, a write cache disable * command MUST flush the write buffers to disc. */ ataStartTransfer(s, 0, PDMBLOCKTXDIR_NONE, ATAFN_BT_NULL, ATAFN_SS_FLUSH, false); break; case 0x03: { /* set transfer mode */ Log2(("%s: transfer mode %#04x\n", __FUNCTION__, s->uATARegNSector)); switch (s->uATARegNSector & 0xf8) { case 0x00: /* PIO default */ case 0x08: /* PIO mode */ break; case ATA_MODE_MDMA: /* MDMA mode */ s->uATATransferMode = (s->uATARegNSector & 0xf8) | RT_MIN(s->uATARegNSector & 0x07, ATA_MDMA_MODE_MAX); break; case ATA_MODE_UDMA: /* UDMA mode */ s->uATATransferMode = (s->uATARegNSector & 0xf8) | RT_MIN(s->uATARegNSector & 0x07, ATA_UDMA_MODE_MAX); break; default: goto abort_cmd; } ataCmdOK(s, ATA_STAT_SEEK); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; } default: goto abort_cmd; } /* * OS/2 workarond: * The OS/2 IDE driver from MCP2 appears to rely on the feature register being * reset here. According to the specification, this is a driver bug as the register * contents are undefined after the call. This means we can just as well reset it. */ s->uATARegFeature = 0; break; case ATA_FLUSH_CACHE_EXT: case ATA_FLUSH_CACHE: if (!s->pDrvBlock || s->fATAPI) goto abort_cmd; ataStartTransfer(s, 0, PDMBLOCKTXDIR_NONE, ATAFN_BT_NULL, ATAFN_SS_FLUSH, false); break; case ATA_STANDBY_IMMEDIATE: ataCmdOK(s, 0); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; case ATA_IDLE_IMMEDIATE: LogRel(("PIIX3 ATA: LUN#%d: aborting current command\n", s->iLUN)); ataAbortCurrentCommand(s, false); break; case ATA_SLEEP: ataCmdOK(s, 0); ataSetIRQ(s); break; /* ATAPI commands */ case ATA_IDENTIFY_PACKET_DEVICE: if (s->fATAPI) ataStartTransfer(s, 512, PDMBLOCKTXDIR_FROM_DEVICE, ATAFN_BT_NULL, ATAFN_SS_ATAPI_IDENTIFY, false); else { ataCmdError(s, ABRT_ERR); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ } break; case ATA_EXECUTE_DEVICE_DIAGNOSTIC: ataStartTransfer(s, 0, PDMBLOCKTXDIR_NONE, ATAFN_BT_NULL, ATAFN_SS_EXECUTE_DEVICE_DIAGNOSTIC, false); break; case ATA_DEVICE_RESET: if (!s->fATAPI) goto abort_cmd; LogRel(("PIIX3 ATA: LUN#%d: performing device RESET\n", s->iLUN)); ataAbortCurrentCommand(s, true); break; case ATA_PACKET: if (!s->fATAPI) goto abort_cmd; /* overlapping commands not supported */ if (s->uATARegFeature & 0x02) goto abort_cmd; ataStartTransfer(s, ATAPI_PACKET_SIZE, PDMBLOCKTXDIR_TO_DEVICE, ATAFN_BT_PACKET, ATAFN_SS_PACKET, false); break; case ATA_DATA_SET_MANAGEMENT: if (!s->pDrvBlock || !s->pDrvBlock->pfnDiscard) goto abort_cmd; if ( !(s->uATARegFeature & UINT8_C(0x01)) || (s->uATARegFeature & ~UINT8_C(0x01))) goto abort_cmd; s->fDMA = true; ataStartTransfer(s, (s->uATARegNSectorHOB << 8 | s->uATARegNSector) * 512, PDMBLOCKTXDIR_TO_DEVICE, ATAFN_BT_NULL, ATAFN_SS_TRIM, false); break; default: abort_cmd: ataCmdError(s, ABRT_ERR); if (s->fATAPI) ataUnsetStatus(s, ATA_STAT_READY); ataSetIRQ(s); /* Shortcut, do not use AIO thread. */ break; } } #endif /* IN_RING3 */ /* * Note: There are four distinct cases of port I/O handling depending on * which devices (if any) are attached to an IDE channel: * * 1) No device attached. No response to writes or reads (i.e. reads return * all bits set). * * 2) Both devices attached. Reads and writes are processed normally. * * 3) Device 0 only. If device 0 is selected, normal behavior applies. But * if Device 1 is selected, writes are still directed to Device 0 (except * commands are not executed), reads from control/command registers are * directed to Device 0, but status/alt status reads return 0. If Device 1 * is a PACKET device, all reads return 0. See ATAPI-6 clause 9.16.1 and * Table 18 in clause 7.1. * * 4) Device 1 only - non-standard(!). Device 1 can't tell if Device 0 is * present or not and behaves the same. That means if Device 0 is selected, * Device 1 responds to writes (except commands are not executed) but does * not respond to reads. If Device 1 selected, normal behavior applies. * See ATAPI-6 clause 9.16.2 and Table 15 in clause 7.1. */ static int ataIOPortWriteU8(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { Log2(("%s: LUN#%d write addr=%#x val=%#04x\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf].iLUN, addr, val)); addr &= 7; switch (addr) { case 0: break; case 1: /* feature register */ /* NOTE: data is written to the two drives */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegFeatureHOB = pCtl->aIfs[0].uATARegFeature; pCtl->aIfs[1].uATARegFeatureHOB = pCtl->aIfs[1].uATARegFeature; pCtl->aIfs[0].uATARegFeature = val; pCtl->aIfs[1].uATARegFeature = val; break; case 2: /* sector count */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegNSectorHOB = pCtl->aIfs[0].uATARegNSector; pCtl->aIfs[1].uATARegNSectorHOB = pCtl->aIfs[1].uATARegNSector; pCtl->aIfs[0].uATARegNSector = val; pCtl->aIfs[1].uATARegNSector = val; break; case 3: /* sector number */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegSectorHOB = pCtl->aIfs[0].uATARegSector; pCtl->aIfs[1].uATARegSectorHOB = pCtl->aIfs[1].uATARegSector; pCtl->aIfs[0].uATARegSector = val; pCtl->aIfs[1].uATARegSector = val; break; case 4: /* cylinder low */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegLCylHOB = pCtl->aIfs[0].uATARegLCyl; pCtl->aIfs[1].uATARegLCylHOB = pCtl->aIfs[1].uATARegLCyl; pCtl->aIfs[0].uATARegLCyl = val; pCtl->aIfs[1].uATARegLCyl = val; break; case 5: /* cylinder high */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegHCylHOB = pCtl->aIfs[0].uATARegHCyl; pCtl->aIfs[1].uATARegHCylHOB = pCtl->aIfs[1].uATARegHCyl; pCtl->aIfs[0].uATARegHCyl = val; pCtl->aIfs[1].uATARegHCyl = val; break; case 6: /* drive/head */ pCtl->aIfs[0].uATARegSelect = (val & ~0x10) | 0xa0; pCtl->aIfs[1].uATARegSelect = (val | 0x10) | 0xa0; if (((val >> 4) & 1) != pCtl->iSelectedIf) { PPDMDEVINS pDevIns = CONTROLLER_2_DEVINS(pCtl); /* select another drive */ pCtl->iSelectedIf = (val >> 4) & 1; /* The IRQ line is multiplexed between the two drives, so * update the state when switching to another drive. Only need * to update interrupt line if it is enabled and there is a * state change. */ if ( !(pCtl->aIfs[pCtl->iSelectedIf].uATARegDevCtl & ATA_DEVCTL_DISABLE_IRQ) && ( pCtl->aIfs[pCtl->iSelectedIf].fIrqPending != pCtl->aIfs[pCtl->iSelectedIf ^ 1].fIrqPending)) { if (pCtl->aIfs[pCtl->iSelectedIf].fIrqPending) { Log2(("%s: LUN#%d asserting IRQ (drive select change)\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf].iLUN)); /* The BMDMA unit unconditionally sets BM_STATUS_INT if * the interrupt line is asserted. It monitors the line * for a rising edge. */ pCtl->BmDma.u8Status |= BM_STATUS_INT; if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 1); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 1); } else { Log2(("%s: LUN#%d deasserting IRQ (drive select change)\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf].iLUN)); if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 0); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 0); } } } break; default: case 7: /* command */ /* ignore commands to non-existent device */ if (pCtl->iSelectedIf && !pCtl->aIfs[pCtl->iSelectedIf].pDrvBlock) break; #ifndef IN_RING3 /* Don't do anything complicated in GC */ return VINF_IOM_R3_IOPORT_WRITE; #else /* IN_RING3 */ ataParseCmd(&pCtl->aIfs[pCtl->iSelectedIf], val); #endif /* !IN_RING3 */ } return VINF_SUCCESS; } static int ataIOPortReadU8(PATACONTROLLER pCtl, uint32_t addr, uint32_t *pu32) { ATADevState *s = &pCtl->aIfs[pCtl->iSelectedIf]; uint32_t val; bool fHOB; /* Check if the guest is reading from a non-existent device. */ if (!s->pDrvBlock) { if (pCtl->iSelectedIf) /* Device 1 selected, Device 0 responding for it. */ { if (!pCtl->aIfs[0].pDrvBlock) /* @todo: this case should never get here! */ { Log2(("%s: addr=%#x: no device on channel\n", __FUNCTION__, addr)); return VERR_IOM_IOPORT_UNUSED; } if (((addr & 7) != 1) && pCtl->aIfs[0].fATAPI) { Log2(("%s: addr=%#x, val=0: LUN#%d not attached/LUN#%d ATAPI\n", __FUNCTION__, addr, s->iLUN, pCtl->aIfs[0].iLUN)); *pu32 = 0; return VINF_SUCCESS; } /* Else handle normally. */ } else /* Device 0 selected (but not present). */ { Log2(("%s: addr=%#x: LUN#%d not attached\n", __FUNCTION__, addr, s->iLUN)); return VERR_IOM_IOPORT_UNUSED; } } fHOB = !!(s->uATARegDevCtl & (1 << 7)); switch (addr & 7) { case 0: /* data register */ val = 0xff; break; case 1: /* error register */ /* The ATA specification is very terse when it comes to specifying * the precise effects of reading back the error/feature register. * The error register (read-only) shares the register number with * the feature register (write-only), so it seems that it's not * necessary to support the usual HOB readback here. */ if (!s->pDrvBlock) val = 0; else val = s->uATARegError; break; case 2: /* sector count */ if (fHOB) val = s->uATARegNSectorHOB; else val = s->uATARegNSector; break; case 3: /* sector number */ if (fHOB) val = s->uATARegSectorHOB; else val = s->uATARegSector; break; case 4: /* cylinder low */ if (fHOB) val = s->uATARegLCylHOB; else val = s->uATARegLCyl; break; case 5: /* cylinder high */ if (fHOB) val = s->uATARegHCylHOB; else val = s->uATARegHCyl; break; case 6: /* drive/head */ /* This register must always work as long as there is at least * one drive attached to the controller. It is common between * both drives anyway (completely identical content). */ if (!pCtl->aIfs[0].pDrvBlock && !pCtl->aIfs[1].pDrvBlock) val = 0; else val = s->uATARegSelect; break; default: case 7: /* primary status */ { /* Counter for number of busy status seen in GC in a row. */ static unsigned cBusy = 0; if (!s->pDrvBlock) val = 0; else val = s->uATARegStatus; /* Give the async I/O thread an opportunity to make progress, * don't let it starve by guests polling frequently. EMT has a * lower priority than the async I/O thread, but sometimes the * host OS doesn't care. With some guests we are only allowed to * be busy for about 5 milliseconds in some situations. Note that * this is no guarantee for any other VBox thread getting * scheduled, so this just lowers the CPU load a bit when drives * are busy. It cannot help with timing problems. */ if (val & ATA_STAT_BUSY) { #ifdef IN_RING3 cBusy = 0; PDMCritSectLeave(&pCtl->lock); #ifndef RT_OS_WINDOWS /* * The thread might be stuck in an I/O operation * due to a high I/O load on the host. (see @bugref{3301}) * To perform the reset successfully * we interrupt the operation by sending a signal to the thread * if the thread didn't responded in 10ms. * This works only on POSIX hosts (Windows has a CancelSynchronousIo function which * does the same but it was introduced with Vista) but so far * this hang was only observed on Linux and Mac OS X. * * This is a workaround and needs to be solved properly. */ if (pCtl->fReset) { uint64_t u64ResetTimeStop = RTTimeMilliTS(); if ((u64ResetTimeStop - pCtl->u64ResetTime) >= 10) { LogRel(("PIIX3 ATA LUN#%d: Async I/O thread probably stuck in operation, interrupting\n", s->iLUN)); pCtl->u64ResetTime = u64ResetTimeStop; RTThreadPoke(pCtl->AsyncIOThread); } } #endif RTThreadYield(); { STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); } val = s->uATARegStatus; #else /* !IN_RING3 */ /* Cannot yield CPU in guest context. And switching to host * context for each and every busy status is too costly, * especially on SMP systems where we don't gain much by * yielding the CPU to someone else. */ if (++cBusy >= 20) { cBusy = 0; return VINF_IOM_R3_IOPORT_READ; } #endif /* !IN_RING3 */ } else cBusy = 0; ataUnsetIRQ(s); break; } } Log2(("%s: LUN#%d addr=%#x val=%#04x\n", __FUNCTION__, s->iLUN, addr, val)); *pu32 = val; return VINF_SUCCESS; } static uint32_t ataStatusRead(PATACONTROLLER pCtl, uint32_t addr) { ATADevState *s = &pCtl->aIfs[pCtl->iSelectedIf]; uint32_t val; if ((!pCtl->aIfs[0].pDrvBlock && !pCtl->aIfs[1].pDrvBlock) || (pCtl->iSelectedIf == 1 && !s->pDrvBlock)) val = 0; else val = s->uATARegStatus; Log2(("%s: addr=%#x val=%#04x\n", __FUNCTION__, addr, val)); return val; } static int ataControlWrite(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { #ifndef IN_RING3 if ((val ^ pCtl->aIfs[0].uATARegDevCtl) & ATA_DEVCTL_RESET) return VINF_IOM_R3_IOPORT_WRITE; /* The RESET stuff is too complicated for GC. */ #endif /* !IN_RING3 */ Log2(("%s: addr=%#x val=%#04x\n", __FUNCTION__, addr, val)); /* RESET is common for both drives attached to a controller. */ if (!(pCtl->aIfs[0].uATARegDevCtl & ATA_DEVCTL_RESET) && (val & ATA_DEVCTL_RESET)) { #ifdef IN_RING3 /* Software RESET low to high */ int32_t uCmdWait0 = -1, uCmdWait1 = -1; uint64_t uNow = RTTimeNanoTS(); if (pCtl->aIfs[0].u64CmdTS) uCmdWait0 = (uNow - pCtl->aIfs[0].u64CmdTS) / 1000; if (pCtl->aIfs[1].u64CmdTS) uCmdWait1 = (uNow - pCtl->aIfs[1].u64CmdTS) / 1000; LogRel(("PIIX3 ATA: Ctl#%d: RESET, DevSel=%d AIOIf=%d CmdIf0=%#04x (%d usec ago) CmdIf1=%#04x (%d usec ago)\n", ATACONTROLLER_IDX(pCtl), pCtl->iSelectedIf, pCtl->iAIOIf, pCtl->aIfs[0].uATARegCommand, uCmdWait0, pCtl->aIfs[1].uATARegCommand, uCmdWait1)); pCtl->fReset = true; /* Everything must be done after the reset flag is set, otherwise * there are unavoidable races with the currently executing request * (which might just finish in the mean time). */ pCtl->fChainedTransfer = false; for (uint32_t i = 0; i < RT_ELEMENTS(pCtl->aIfs); i++) { ataResetDevice(&pCtl->aIfs[i]); /* The following cannot be done using ataSetStatusValue() since the * reset flag is already set, which suppresses all status changes. */ pCtl->aIfs[i].uATARegStatus = ATA_STAT_BUSY | ATA_STAT_SEEK; Log2(("%s: LUN#%d status %#04x\n", __FUNCTION__, pCtl->aIfs[i].iLUN, pCtl->aIfs[i].uATARegStatus)); pCtl->aIfs[i].uATARegError = 0x01; } ataAsyncIOClearRequests(pCtl); Log2(("%s: Ctl#%d: message to async I/O thread, resetA\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); if (val & ATA_DEVCTL_HOB) { val &= ~ATA_DEVCTL_HOB; Log2(("%s: ignored setting HOB\n", __FUNCTION__)); } /* Save the timestamp we started the reset. */ pCtl->u64ResetTime = RTTimeMilliTS(); /* Issue the reset request now. */ ataAsyncIOPutRequest(pCtl, &g_ataResetARequest); #else /* !IN_RING3 */ AssertMsgFailed(("RESET handling is too complicated for GC\n")); #endif /* IN_RING3 */ } else if ((pCtl->aIfs[0].uATARegDevCtl & ATA_DEVCTL_RESET) && !(val & ATA_DEVCTL_RESET)) { #ifdef IN_RING3 /* Software RESET high to low */ Log(("%s: deasserting RESET\n", __FUNCTION__)); Log2(("%s: Ctl#%d: message to async I/O thread, resetC\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); if (val & ATA_DEVCTL_HOB) { val &= ~ATA_DEVCTL_HOB; Log2(("%s: ignored setting HOB\n", __FUNCTION__)); } ataAsyncIOPutRequest(pCtl, &g_ataResetCRequest); #else /* !IN_RING3 */ AssertMsgFailed(("RESET handling is too complicated for GC\n")); #endif /* IN_RING3 */ } /* Change of interrupt disable flag. Update interrupt line if interrupt * is pending on the current interface. */ if ((val ^ pCtl->aIfs[0].uATARegDevCtl) & ATA_DEVCTL_DISABLE_IRQ && pCtl->aIfs[pCtl->iSelectedIf].fIrqPending) { if (!(val & ATA_DEVCTL_DISABLE_IRQ)) { Log2(("%s: LUN#%d asserting IRQ (interrupt disable change)\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf].iLUN)); /* The BMDMA unit unconditionally sets BM_STATUS_INT if the * interrupt line is asserted. It monitors the line for a rising * edge. */ pCtl->BmDma.u8Status |= BM_STATUS_INT; if (pCtl->irq == 16) PDMDevHlpPCISetIrq(CONTROLLER_2_DEVINS(pCtl), 0, 1); else PDMDevHlpISASetIrq(CONTROLLER_2_DEVINS(pCtl), pCtl->irq, 1); } else { Log2(("%s: LUN#%d deasserting IRQ (interrupt disable change)\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf].iLUN)); if (pCtl->irq == 16) PDMDevHlpPCISetIrq(CONTROLLER_2_DEVINS(pCtl), 0, 0); else PDMDevHlpISASetIrq(CONTROLLER_2_DEVINS(pCtl), pCtl->irq, 0); } } if (val & ATA_DEVCTL_HOB) Log2(("%s: set HOB\n", __FUNCTION__)); pCtl->aIfs[0].uATARegDevCtl = val; pCtl->aIfs[1].uATARegDevCtl = val; return VINF_SUCCESS; } #ifdef IN_RING3 static void ataPIOTransfer(PATACONTROLLER pCtl) { ATADevState *s; s = &pCtl->aIfs[pCtl->iAIOIf]; Log3(("%s: if=%p\n", __FUNCTION__, s)); if (s->cbTotalTransfer && s->iIOBufferCur > s->iIOBufferEnd) { LogRel(("PIIX3 ATA: LUN#%d: %s data in the middle of a PIO transfer - VERY SLOW\n", s->iLUN, s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE ? "loading" : "storing")); /* Any guest OS that triggers this case has a pathetic ATA driver. * In a real system it would block the CPU via IORDY, here we do it * very similarly by not continuing with the current instruction * until the transfer to/from the storage medium is completed. */ if (s->iSourceSink != ATAFN_SS_NULL) { bool fRedo; uint8_t status = s->uATARegStatus; ataSetStatusValue(s, ATA_STAT_BUSY); Log2(("%s: calling source/sink function\n", __FUNCTION__)); fRedo = g_apfnSourceSinkFuncs[s->iSourceSink](s); pCtl->fRedo = fRedo; if (RT_UNLIKELY(fRedo)) return; ataSetStatusValue(s, status); s->iIOBufferCur = 0; s->iIOBufferEnd = s->cbElementaryTransfer; } } if (s->cbTotalTransfer) { if (s->fATAPITransfer) ataPIOTransferLimitATAPI(s); if (s->uTxDir == PDMBLOCKTXDIR_TO_DEVICE && s->cbElementaryTransfer > s->cbTotalTransfer) s->cbElementaryTransfer = s->cbTotalTransfer; Log2(("%s: %s tx_size=%d elem_tx_size=%d index=%d end=%d\n", __FUNCTION__, s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE ? "T2I" : "I2T", s->cbTotalTransfer, s->cbElementaryTransfer, s->iIOBufferCur, s->iIOBufferEnd)); ataPIOTransferStart(s, s->iIOBufferCur, s->cbElementaryTransfer); s->cbTotalTransfer -= s->cbElementaryTransfer; s->iIOBufferCur += s->cbElementaryTransfer; if (s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE && s->cbElementaryTransfer > s->cbTotalTransfer) s->cbElementaryTransfer = s->cbTotalTransfer; } else ataPIOTransferStop(s); } DECLINLINE(void) ataPIOTransferFinish(PATACONTROLLER pCtl, ATADevState *s) { /* Do not interfere with RESET processing if the PIO transfer finishes * while the RESET line is asserted. */ if (pCtl->fReset) { Log2(("%s: Ctl#%d: suppressed continuing PIO transfer as RESET is active\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); return; } if ( s->uTxDir == PDMBLOCKTXDIR_TO_DEVICE || ( s->iSourceSink != ATAFN_SS_NULL && s->iIOBufferCur >= s->iIOBufferEnd)) { /* Need to continue the transfer in the async I/O thread. This is * the case for write operations or generally for not yet finished * transfers (some data might need to be read). */ ataUnsetStatus(s, ATA_STAT_READY | ATA_STAT_DRQ); ataSetStatus(s, ATA_STAT_BUSY); Log2(("%s: Ctl#%d: message to async I/O thread, continuing PIO transfer\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); ataAsyncIOPutRequest(pCtl, &g_ataPIORequest); } else { /* Either everything finished (though some data might still be pending) * or some data is pending before the next read is due. */ /* Continue a previously started transfer. */ ataUnsetStatus(s, ATA_STAT_DRQ); ataSetStatus(s, ATA_STAT_READY); if (s->cbTotalTransfer) { /* There is more to transfer, happens usually for large ATAPI * reads - the protocol limits the chunk size to 65534 bytes. */ ataPIOTransfer(pCtl); ataSetIRQ(s); } else { Log2(("%s: Ctl#%d: skipping message to async I/O thread, ending PIO transfer\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); /* Finish PIO transfer. */ ataPIOTransfer(pCtl); Assert(!pCtl->fRedo); } } } #endif /* IN_RING3 */ static int ataDataWrite(PATACONTROLLER pCtl, uint32_t addr, uint32_t cbSize, const uint8_t *pbBuf) { ATADevState *s = &pCtl->aIfs[pCtl->iSelectedIf]; uint8_t *p; if (s->iIOBufferPIODataStart < s->iIOBufferPIODataEnd) { Assert(s->uTxDir == PDMBLOCKTXDIR_TO_DEVICE); p = s->CTX_SUFF(pbIOBuffer) + s->iIOBufferPIODataStart; #ifndef IN_RING3 /* All but the last transfer unit is simple enough for GC, but * sending a request to the async IO thread is too complicated. */ if (s->iIOBufferPIODataStart + cbSize < s->iIOBufferPIODataEnd) { memcpy(p, pbBuf, cbSize); s->iIOBufferPIODataStart += cbSize; } else return VINF_IOM_R3_IOPORT_WRITE; #else /* IN_RING3 */ memcpy(p, pbBuf, cbSize); s->iIOBufferPIODataStart += cbSize; if (s->iIOBufferPIODataStart >= s->iIOBufferPIODataEnd) ataPIOTransferFinish(pCtl, s); #endif /* !IN_RING3 */ } else Log2(("%s: DUMMY data\n", __FUNCTION__)); Log3(("%s: addr=%#x val=%.*Rhxs\n", __FUNCTION__, addr, cbSize, pbBuf)); return VINF_SUCCESS; } static int ataDataRead(PATACONTROLLER pCtl, uint32_t addr, uint32_t cbSize, uint8_t *pbBuf) { ATADevState *s = &pCtl->aIfs[pCtl->iSelectedIf]; uint8_t *p; if (s->iIOBufferPIODataStart < s->iIOBufferPIODataEnd) { Assert(s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE); p = s->CTX_SUFF(pbIOBuffer) + s->iIOBufferPIODataStart; #ifndef IN_RING3 /* All but the last transfer unit is simple enough for GC, but * sending a request to the async IO thread is too complicated. */ if (s->iIOBufferPIODataStart + cbSize < s->iIOBufferPIODataEnd) { memcpy(pbBuf, p, cbSize); s->iIOBufferPIODataStart += cbSize; } else return VINF_IOM_R3_IOPORT_READ; #else /* IN_RING3 */ memcpy(pbBuf, p, cbSize); s->iIOBufferPIODataStart += cbSize; if (s->iIOBufferPIODataStart >= s->iIOBufferPIODataEnd) ataPIOTransferFinish(pCtl, s); #endif /* !IN_RING3 */ } else { Log2(("%s: DUMMY data\n", __FUNCTION__)); memset(pbBuf, '\xff', cbSize); } Log3(("%s: addr=%#x val=%.*Rhxs\n", __FUNCTION__, addr, cbSize, pbBuf)); return VINF_SUCCESS; } #ifdef IN_RING3 static void ataDMATransferStop(ATADevState *s) { s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; } /** * Perform the entire DMA transfer in one go (unless a source/sink operation * has to be redone or a RESET comes in between). Unlike the PIO counterpart * this function cannot handle empty transfers. * * @param pCtl Controller for which to perform the transfer. */ static void ataDMATransfer(PATACONTROLLER pCtl) { PPDMDEVINS pDevIns = CONTROLLER_2_DEVINS(pCtl); ATADevState *s = &pCtl->aIfs[pCtl->iAIOIf]; bool fRedo; RTGCPHYS32 pDesc; uint32_t cbTotalTransfer, cbElementaryTransfer; uint32_t iIOBufferCur, iIOBufferEnd; uint32_t dmalen; PDMBLOCKTXDIR uTxDir; bool fLastDesc = false; Assert(sizeof(BMDMADesc) == 8); fRedo = pCtl->fRedo; if (RT_LIKELY(!fRedo)) Assert(s->cbTotalTransfer); uTxDir = (PDMBLOCKTXDIR)s->uTxDir; cbTotalTransfer = s->cbTotalTransfer; cbElementaryTransfer = s->cbElementaryTransfer; iIOBufferCur = s->iIOBufferCur; iIOBufferEnd = s->iIOBufferEnd; /* The DMA loop is designed to hold the lock only when absolutely * necessary. This avoids long freezes should the guest access the * ATA registers etc. for some reason. */ PDMCritSectLeave(&pCtl->lock); Log2(("%s: %s tx_size=%d elem_tx_size=%d index=%d end=%d\n", __FUNCTION__, uTxDir == PDMBLOCKTXDIR_FROM_DEVICE ? "T2I" : "I2T", cbTotalTransfer, cbElementaryTransfer, iIOBufferCur, iIOBufferEnd)); for (pDesc = pCtl->pFirstDMADesc; pDesc <= pCtl->pLastDMADesc; pDesc += sizeof(BMDMADesc)) { BMDMADesc DMADesc; RTGCPHYS32 pBuffer; uint32_t cbBuffer; if (RT_UNLIKELY(fRedo)) { pBuffer = pCtl->pRedoDMABuffer; cbBuffer = pCtl->cbRedoDMABuffer; fLastDesc = pCtl->fRedoDMALastDesc; } else { PDMDevHlpPhysRead(pDevIns, pDesc, &DMADesc, sizeof(BMDMADesc)); pBuffer = RT_LE2H_U32(DMADesc.pBuffer); cbBuffer = RT_LE2H_U32(DMADesc.cbBuffer); fLastDesc = !!(cbBuffer & 0x80000000); cbBuffer &= 0xfffe; if (cbBuffer == 0) cbBuffer = 0x10000; if (cbBuffer > cbTotalTransfer) cbBuffer = cbTotalTransfer; } while (RT_UNLIKELY(fRedo) || (cbBuffer && cbTotalTransfer)) { if (RT_LIKELY(!fRedo)) { dmalen = RT_MIN(cbBuffer, iIOBufferEnd - iIOBufferCur); Log2(("%s: DMA desc %#010x: addr=%#010x size=%#010x orig_size=%#010x\n", __FUNCTION__, (int)pDesc, pBuffer, cbBuffer, RT_LE2H_U32(DMADesc.cbBuffer) & 0xfffe)); PCIATAState *pATAState = PDMINS_2_DATA(pDevIns, PCIATAState *); AssertPtr(pATAState); if (uTxDir == PDMBLOCKTXDIR_FROM_DEVICE) PDMDevHlpPCIDevPhysWrite(&pATAState->dev, pBuffer, s->CTX_SUFF(pbIOBuffer) + iIOBufferCur, dmalen); else PDMDevHlpPCIDevPhysRead(&pATAState->dev, pBuffer, s->CTX_SUFF(pbIOBuffer) + iIOBufferCur, dmalen); iIOBufferCur += dmalen; cbTotalTransfer -= dmalen; cbBuffer -= dmalen; pBuffer += dmalen; } if ( iIOBufferCur == iIOBufferEnd && (uTxDir == PDMBLOCKTXDIR_TO_DEVICE || cbTotalTransfer)) { if (uTxDir == PDMBLOCKTXDIR_FROM_DEVICE && cbElementaryTransfer > cbTotalTransfer) cbElementaryTransfer = cbTotalTransfer; { STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); } /* The RESET handler could have cleared the DMA transfer * state (since we didn't hold the lock until just now * the guest can continue in parallel). If so, the state * is already set up so the loop is exited immediately. */ if (s->iSourceSink != ATAFN_SS_NULL) { s->iIOBufferCur = iIOBufferCur; s->iIOBufferEnd = iIOBufferEnd; s->cbElementaryTransfer = cbElementaryTransfer; s->cbTotalTransfer = cbTotalTransfer; Log2(("%s: calling source/sink function\n", __FUNCTION__)); fRedo = g_apfnSourceSinkFuncs[s->iSourceSink](s); if (RT_UNLIKELY(fRedo)) { pCtl->pFirstDMADesc = pDesc; pCtl->pRedoDMABuffer = pBuffer; pCtl->cbRedoDMABuffer = cbBuffer; pCtl->fRedoDMALastDesc = fLastDesc; } else { cbTotalTransfer = s->cbTotalTransfer; cbElementaryTransfer = s->cbElementaryTransfer; if (uTxDir == PDMBLOCKTXDIR_TO_DEVICE && cbElementaryTransfer > cbTotalTransfer) cbElementaryTransfer = cbTotalTransfer; iIOBufferCur = 0; iIOBufferEnd = cbElementaryTransfer; } pCtl->fRedo = fRedo; } else { /* This forces the loop to exit immediately. */ pDesc = pCtl->pLastDMADesc + 1; } PDMCritSectLeave(&pCtl->lock); if (RT_UNLIKELY(fRedo)) break; } } if (RT_UNLIKELY(fRedo)) break; /* end of transfer */ if (!cbTotalTransfer || fLastDesc) break; { STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); } if (!(pCtl->BmDma.u8Cmd & BM_CMD_START) || pCtl->fReset) { LogRel(("PIIX3 ATA: Ctl#%d: ABORT DMA%s\n", ATACONTROLLER_IDX(pCtl), pCtl->fReset ? " due to RESET" : "")); if (!pCtl->fReset) ataDMATransferStop(s); /* This forces the loop to exit immediately. */ pDesc = pCtl->pLastDMADesc + 1; } PDMCritSectLeave(&pCtl->lock); } { STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); } if (RT_UNLIKELY(fRedo)) return; if (fLastDesc) pCtl->BmDma.u8Status &= ~BM_STATUS_DMAING; s->cbTotalTransfer = cbTotalTransfer; s->cbElementaryTransfer = cbElementaryTransfer; s->iIOBufferCur = iIOBufferCur; s->iIOBufferEnd = iIOBufferEnd; } /** * Signal PDM that we're idle (if we actually are). * * @param pCtl The controller. */ static void ataR3AsyncSignalIdle(PATACONTROLLER pCtl) { /* * Take the mutex here and recheck the idle indicator to avoid * unnecessary work and racing ataR3WaitForAsyncIOIsIdle. */ int rc = RTSemMutexRequest(pCtl->AsyncIORequestMutex, RT_INDEFINITE_WAIT); AssertRC(rc); if ( pCtl->fSignalIdle && ataAsyncIOIsIdle(pCtl, false /*fStrict*/)) { PDMDevHlpAsyncNotificationCompleted(pCtl->pDevInsR3); RTThreadUserSignal(pCtl->AsyncIOThread); /* for ataR3Construct/ataR3ResetCommon. */ } rc = RTSemMutexRelease(pCtl->AsyncIORequestMutex); AssertRC(rc); } /** Async I/O thread for an interface. Once upon a time this was readable * code with several loops and a different semaphore for each purpose. But * then came the "how can one save the state in the middle of a PIO transfer" * question. The solution was to use an ASM, which is what's there now. */ static DECLCALLBACK(int) ataAsyncIOLoop(RTTHREAD ThreadSelf, void *pvUser) { const ATARequest *pReq; uint64_t u64TS = 0; /* shut up gcc */ uint64_t uWait; int rc = VINF_SUCCESS; PATACONTROLLER pCtl = (PATACONTROLLER)pvUser; ATADevState *s; pReq = NULL; pCtl->fChainedTransfer = false; while (!pCtl->fShutdown) { /* Keep this thread from doing anything as long as EMT is suspended. */ while (pCtl->fRedoIdle) { if (pCtl->fSignalIdle) ataR3AsyncSignalIdle(pCtl); rc = RTSemEventWait(pCtl->SuspendIOSem, RT_INDEFINITE_WAIT); /* Continue if we got a signal by RTThreadPoke(). * We will get notified if there is a request to process. */ if (RT_UNLIKELY(rc == VERR_INTERRUPTED)) continue; if (RT_FAILURE(rc) || pCtl->fShutdown) break; pCtl->fRedoIdle = false; } /* Wait for work. */ while (pReq == NULL) { if (pCtl->fSignalIdle) ataR3AsyncSignalIdle(pCtl); rc = RTSemEventWait(pCtl->AsyncIOSem, RT_INDEFINITE_WAIT); /* Continue if we got a signal by RTThreadPoke(). * We will get notified if there is a request to process. */ if (RT_UNLIKELY(rc == VERR_INTERRUPTED)) continue; if (RT_FAILURE(rc) || RT_UNLIKELY(pCtl->fShutdown)) break; pReq = ataAsyncIOGetCurrentRequest(pCtl); } if (RT_FAILURE(rc) || pCtl->fShutdown) break; if (pReq == NULL) continue; ATAAIO ReqType = pReq->ReqType; Log2(("%s: Ctl#%d: state=%d, req=%d\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl), pCtl->uAsyncIOState, ReqType)); if (pCtl->uAsyncIOState != ReqType) { /* The new state is not the state that was expected by the normal * state changes. This is either a RESET/ABORT or there's something * really strange going on. */ if ( (pCtl->uAsyncIOState == ATA_AIO_PIO || pCtl->uAsyncIOState == ATA_AIO_DMA) && (ReqType == ATA_AIO_PIO || ReqType == ATA_AIO_DMA)) { /* Incorrect sequence of PIO/DMA states. Dump request queue. */ ataAsyncIODumpRequests(pCtl); } AssertReleaseMsg(ReqType == ATA_AIO_RESET_ASSERTED || ReqType == ATA_AIO_RESET_CLEARED || ReqType == ATA_AIO_ABORT || pCtl->uAsyncIOState == ReqType, ("I/O state inconsistent: state=%d request=%d\n", pCtl->uAsyncIOState, ReqType)); } /* Do our work. */ { STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); } if (pCtl->uAsyncIOState == ATA_AIO_NEW && !pCtl->fChainedTransfer) { u64TS = RTTimeNanoTS(); #if defined(DEBUG) || defined(VBOX_WITH_STATISTICS) STAM_PROFILE_ADV_START(&pCtl->StatAsyncTime, a); #endif /* DEBUG || VBOX_WITH_STATISTICS */ } switch (ReqType) { case ATA_AIO_NEW: pCtl->iAIOIf = pReq->u.t.iIf; s = &pCtl->aIfs[pCtl->iAIOIf]; s->cbTotalTransfer = pReq->u.t.cbTotalTransfer; s->uTxDir = pReq->u.t.uTxDir; s->iBeginTransfer = pReq->u.t.iBeginTransfer; s->iSourceSink = pReq->u.t.iSourceSink; s->iIOBufferEnd = 0; s->u64CmdTS = u64TS; if (s->fATAPI) { if (pCtl->fChainedTransfer) { /* Only count the actual transfers, not the PIO * transfer of the ATAPI command bytes. */ if (s->fDMA) STAM_REL_COUNTER_INC(&s->StatATAPIDMA); else STAM_REL_COUNTER_INC(&s->StatATAPIPIO); } } else { if (s->fDMA) STAM_REL_COUNTER_INC(&s->StatATADMA); else STAM_REL_COUNTER_INC(&s->StatATAPIO); } pCtl->fChainedTransfer = false; if (s->iBeginTransfer != ATAFN_BT_NULL) { Log2(("%s: Ctl#%d: calling begin transfer function\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); g_apfnBeginTransFuncs[s->iBeginTransfer](s); s->iBeginTransfer = ATAFN_BT_NULL; if (s->uTxDir != PDMBLOCKTXDIR_FROM_DEVICE) s->iIOBufferEnd = s->cbElementaryTransfer; } else { s->cbElementaryTransfer = s->cbTotalTransfer; s->iIOBufferEnd = s->cbTotalTransfer; } s->iIOBufferCur = 0; if (s->uTxDir != PDMBLOCKTXDIR_TO_DEVICE) { if (s->iSourceSink != ATAFN_SS_NULL) { bool fRedo; Log2(("%s: Ctl#%d: calling source/sink function\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); fRedo = g_apfnSourceSinkFuncs[s->iSourceSink](s); pCtl->fRedo = fRedo; if (RT_UNLIKELY(fRedo && !pCtl->fReset)) { /* Operation failed at the initial transfer, restart * everything from scratch by resending the current * request. Occurs very rarely, not worth optimizing. */ LogRel(("%s: Ctl#%d: redo entire operation\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); ataAsyncIOPutRequest(pCtl, pReq); break; } } else ataCmdOK(s, 0); s->iIOBufferEnd = s->cbElementaryTransfer; } /* Do not go into the transfer phase if RESET is asserted. * The CritSect is released while waiting for the host OS * to finish the I/O, thus RESET is possible here. Most * important: do not change uAsyncIOState. */ if (pCtl->fReset) break; if (s->fDMA) { if (s->cbTotalTransfer) { ataSetStatus(s, ATA_STAT_DRQ); pCtl->uAsyncIOState = ATA_AIO_DMA; /* If BMDMA is already started, do the transfer now. */ if (pCtl->BmDma.u8Cmd & BM_CMD_START) { Log2(("%s: Ctl#%d: message to async I/O thread, continuing DMA transfer immediately\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); ataAsyncIOPutRequest(pCtl, &g_ataDMARequest); } } else { Assert(s->uTxDir == PDMBLOCKTXDIR_NONE); /* Any transfer which has an initial transfer size of 0 must be marked as such. */ /* Finish DMA transfer. */ ataDMATransferStop(s); ataSetIRQ(s); pCtl->uAsyncIOState = ATA_AIO_NEW; } } else { if (s->cbTotalTransfer) { ataPIOTransfer(pCtl); Assert(!pCtl->fRedo); if (s->fATAPITransfer || s->uTxDir != PDMBLOCKTXDIR_TO_DEVICE) ataSetIRQ(s); if (s->uTxDir == PDMBLOCKTXDIR_TO_DEVICE || s->iSourceSink != ATAFN_SS_NULL) { /* Write operations and not yet finished transfers * must be completed in the async I/O thread. */ pCtl->uAsyncIOState = ATA_AIO_PIO; } else { /* Finished read operation can be handled inline * in the end of PIO transfer handling code. Linux * depends on this, as it waits only briefly for * devices to become ready after incoming data * transfer. Cannot find anything in the ATA spec * that backs this assumption, but as all kernels * are affected (though most of the time it does * not cause any harm) this must work. */ pCtl->uAsyncIOState = ATA_AIO_NEW; } } else { Assert(s->uTxDir == PDMBLOCKTXDIR_NONE); /* Any transfer which has an initial transfer size of 0 must be marked as such. */ /* Finish PIO transfer. */ ataPIOTransfer(pCtl); Assert(!pCtl->fRedo); if (!s->fATAPITransfer) ataSetIRQ(s); pCtl->uAsyncIOState = ATA_AIO_NEW; } } break; case ATA_AIO_DMA: { BMDMAState *bm = &pCtl->BmDma; s = &pCtl->aIfs[pCtl->iAIOIf]; /* Do not remove or there's an instant crash after loading the saved state */ ATAFNSS iOriginalSourceSink = (ATAFNSS)s->iSourceSink; /* Used by the hack below, but gets reset by then. */ if (s->uTxDir == PDMBLOCKTXDIR_FROM_DEVICE) AssertRelease(bm->u8Cmd & BM_CMD_WRITE); else AssertRelease(!(bm->u8Cmd & BM_CMD_WRITE)); if (RT_LIKELY(!pCtl->fRedo)) { /* The specs say that the descriptor table must not cross a * 4K boundary. */ pCtl->pFirstDMADesc = bm->pvAddr; pCtl->pLastDMADesc = RT_ALIGN_32(bm->pvAddr + 1, _4K) - sizeof(BMDMADesc); } ataDMATransfer(pCtl); if (RT_UNLIKELY(pCtl->fRedo && !pCtl->fReset)) { LogRel(("PIIX3 ATA: Ctl#%d: redo DMA operation\n", ATACONTROLLER_IDX(pCtl))); ataAsyncIOPutRequest(pCtl, &g_ataDMARequest); break; } /* The infamous delay IRQ hack. */ if ( iOriginalSourceSink == ATAFN_SS_WRITE_SECTORS && s->cbTotalTransfer == 0 && pCtl->DelayIRQMillies) { /* Delay IRQ for writing. Required to get the Win2K * installation work reliably (otherwise it crashes, * usually during component install). So far no better * solution has been found. */ Log(("%s: delay IRQ hack\n", __FUNCTION__)); PDMCritSectLeave(&pCtl->lock); RTThreadSleep(pCtl->DelayIRQMillies); PDMCritSectEnter(&pCtl->lock, VINF_SUCCESS); } ataUnsetStatus(s, ATA_STAT_DRQ); Assert(!pCtl->fChainedTransfer); Assert(s->iSourceSink == ATAFN_SS_NULL); if (s->fATAPITransfer) { s->uATARegNSector = (s->uATARegNSector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; Log2(("%s: Ctl#%d: interrupt reason %#04x\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl), s->uATARegNSector)); s->fATAPITransfer = false; } ataSetIRQ(s); pCtl->uAsyncIOState = ATA_AIO_NEW; break; } case ATA_AIO_PIO: s = &pCtl->aIfs[pCtl->iAIOIf]; /* Do not remove or there's an instant crash after loading the saved state */ if (s->iSourceSink != ATAFN_SS_NULL) { bool fRedo; Log2(("%s: Ctl#%d: calling source/sink function\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); fRedo = g_apfnSourceSinkFuncs[s->iSourceSink](s); pCtl->fRedo = fRedo; if (RT_UNLIKELY(fRedo && !pCtl->fReset)) { LogRel(("PIIX3 ATA: Ctl#%d: redo PIO operation\n", ATACONTROLLER_IDX(pCtl))); ataAsyncIOPutRequest(pCtl, &g_ataPIORequest); break; } s->iIOBufferCur = 0; s->iIOBufferEnd = s->cbElementaryTransfer; } else { /* Continue a previously started transfer. */ ataUnsetStatus(s, ATA_STAT_BUSY); ataSetStatus(s, ATA_STAT_READY); } /* It is possible that the drives on this controller get RESET * during the above call to the source/sink function. If that's * the case, don't restart the transfer and don't finish it the * usual way. RESET handling took care of all that already. * Most important: do not change uAsyncIOState. */ if (pCtl->fReset) break; if (s->cbTotalTransfer) { ataPIOTransfer(pCtl); ataSetIRQ(s); if (s->uTxDir == PDMBLOCKTXDIR_TO_DEVICE || s->iSourceSink != ATAFN_SS_NULL) { /* Write operations and not yet finished transfers * must be completed in the async I/O thread. */ pCtl->uAsyncIOState = ATA_AIO_PIO; } else { /* Finished read operation can be handled inline * in the end of PIO transfer handling code. Linux * depends on this, as it waits only briefly for * devices to become ready after incoming data * transfer. Cannot find anything in the ATA spec * that backs this assumption, but as all kernels * are affected (though most of the time it does * not cause any harm) this must work. */ pCtl->uAsyncIOState = ATA_AIO_NEW; } } else { /* Finish PIO transfer. */ ataPIOTransfer(pCtl); if ( !pCtl->fChainedTransfer && !s->fATAPITransfer && s->uTxDir != PDMBLOCKTXDIR_FROM_DEVICE) { ataSetIRQ(s); } pCtl->uAsyncIOState = ATA_AIO_NEW; } break; case ATA_AIO_RESET_ASSERTED: pCtl->uAsyncIOState = ATA_AIO_RESET_CLEARED; ataPIOTransferStop(&pCtl->aIfs[0]); ataPIOTransferStop(&pCtl->aIfs[1]); /* Do not change the DMA registers, they are not affected by the * ATA controller reset logic. It should be sufficient to issue a * new command, which is now possible as the state is cleared. */ break; case ATA_AIO_RESET_CLEARED: pCtl->uAsyncIOState = ATA_AIO_NEW; pCtl->fReset = false; /* Ensure that half-completed transfers are not redone. A reset * cancels the entire transfer, so continuing is wrong. */ pCtl->fRedo = false; pCtl->fRedoDMALastDesc = false; LogRel(("PIIX3 ATA: Ctl#%d: finished processing RESET\n", ATACONTROLLER_IDX(pCtl))); for (uint32_t i = 0; i < RT_ELEMENTS(pCtl->aIfs); i++) { if (pCtl->aIfs[i].fATAPI) ataSetStatusValue(&pCtl->aIfs[i], 0); /* NOTE: READY is _not_ set */ else ataSetStatusValue(&pCtl->aIfs[i], ATA_STAT_READY | ATA_STAT_SEEK); ataSetSignature(&pCtl->aIfs[i]); } break; case ATA_AIO_ABORT: /* Abort the current command no matter what. There cannot be * any command activity on the other drive otherwise using * one thread per controller wouldn't work at all. */ s = &pCtl->aIfs[pReq->u.a.iIf]; pCtl->uAsyncIOState = ATA_AIO_NEW; /* Do not change the DMA registers, they are not affected by the * ATA controller reset logic. It should be sufficient to issue a * new command, which is now possible as the state is cleared. */ if (pReq->u.a.fResetDrive) { ataResetDevice(s); ataExecuteDeviceDiagnosticSS(s); } else { /* Stop any pending DMA transfer. */ s->fDMA = false; ataPIOTransferStop(s); ataUnsetStatus(s, ATA_STAT_BUSY | ATA_STAT_DRQ | ATA_STAT_SEEK | ATA_STAT_ERR); ataSetStatus(s, ATA_STAT_READY); ataSetIRQ(s); } break; default: AssertMsgFailed(("Undefined async I/O state %d\n", pCtl->uAsyncIOState)); } ataAsyncIORemoveCurrentRequest(pCtl, ReqType); pReq = ataAsyncIOGetCurrentRequest(pCtl); if (pCtl->uAsyncIOState == ATA_AIO_NEW && !pCtl->fChainedTransfer) { #if defined(DEBUG) || defined(VBOX_WITH_STATISTICS) STAM_PROFILE_ADV_STOP(&pCtl->StatAsyncTime, a); #endif /* DEBUG || VBOX_WITH_STATISTICS */ u64TS = RTTimeNanoTS() - u64TS; uWait = u64TS / 1000; Log(("%s: Ctl#%d: LUN#%d finished I/O transaction in %d microseconds\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl), pCtl->aIfs[pCtl->iAIOIf].iLUN, (uint32_t)(uWait))); /* Mark command as finished. */ pCtl->aIfs[pCtl->iAIOIf].u64CmdTS = 0; /* * Release logging of command execution times depends on the * command type. ATAPI commands often take longer (due to CD/DVD * spin up time etc.) so the threshold is different. */ if (pCtl->aIfs[pCtl->iAIOIf].uATARegCommand != ATA_PACKET) { if (uWait > 8 * 1000 * 1000) { /* * Command took longer than 8 seconds. This is close * enough or over the guest's command timeout, so place * an entry in the release log to allow tracking such * timing errors (which are often caused by the host). */ LogRel(("PIIX3 ATA: execution time for ATA command %#04x was %d seconds\n", pCtl->aIfs[pCtl->iAIOIf].uATARegCommand, uWait / (1000 * 1000))); } } else { if (uWait > 20 * 1000 * 1000) { /* * Command took longer than 20 seconds. This is close * enough or over the guest's command timeout, so place * an entry in the release log to allow tracking such * timing errors (which are often caused by the host). */ LogRel(("PIIX3 ATA: execution time for ATAPI command %#04x was %d seconds\n", pCtl->aIfs[pCtl->iAIOIf].aATAPICmd[0], uWait / (1000 * 1000))); } } #if defined(DEBUG) || defined(VBOX_WITH_STATISTICS) if (uWait < pCtl->StatAsyncMinWait || !pCtl->StatAsyncMinWait) pCtl->StatAsyncMinWait = uWait; if (uWait > pCtl->StatAsyncMaxWait) pCtl->StatAsyncMaxWait = uWait; STAM_COUNTER_ADD(&pCtl->StatAsyncTimeUS, uWait); STAM_COUNTER_INC(&pCtl->StatAsyncOps); #endif /* DEBUG || VBOX_WITH_STATISTICS */ } PDMCritSectLeave(&pCtl->lock); } /* Signal the ultimate idleness. */ RTThreadUserSignal(pCtl->AsyncIOThread); if (pCtl->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pCtl->pDevInsR3); /* Cleanup the state. */ /* Do not destroy request mutex yet, still needed for proper shutdown. */ pCtl->fShutdown = false; Log2(("%s: Ctl#%d: return %Rrc\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl), rc)); return rc; } #endif /* IN_RING3 */ static uint32_t ataBMDMACmdReadB(PATACONTROLLER pCtl, uint32_t addr) { uint32_t val = pCtl->BmDma.u8Cmd; Log2(("%s: addr=%#06x val=%#04x\n", __FUNCTION__, addr, val)); return val; } static void ataBMDMACmdWriteB(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { Log2(("%s: addr=%#06x val=%#04x\n", __FUNCTION__, addr, val)); if (!(val & BM_CMD_START)) { pCtl->BmDma.u8Status &= ~BM_STATUS_DMAING; pCtl->BmDma.u8Cmd = val & (BM_CMD_START | BM_CMD_WRITE); } else { #ifdef IN_RING3 /* Check whether the guest OS wants to change DMA direction in * mid-flight. Not allowed, according to the PIIX3 specs. */ Assert(!(pCtl->BmDma.u8Status & BM_STATUS_DMAING) || !((val ^ pCtl->BmDma.u8Cmd) & 0x04)); uint8_t uOldBmDmaStatus = pCtl->BmDma.u8Status; pCtl->BmDma.u8Status |= BM_STATUS_DMAING; pCtl->BmDma.u8Cmd = val & (BM_CMD_START | BM_CMD_WRITE); /* Do not continue DMA transfers while the RESET line is asserted. */ if (pCtl->fReset) { Log2(("%s: Ctl#%d: suppressed continuing DMA transfer as RESET is active\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); return; } /* Do not start DMA transfers if there's a PIO transfer going on, * or if there is already a transfer started on this controller. */ if ( !pCtl->aIfs[pCtl->iSelectedIf].fDMA || (uOldBmDmaStatus & BM_STATUS_DMAING)) return; if (pCtl->aIfs[pCtl->iAIOIf].uATARegStatus & ATA_STAT_DRQ) { Log2(("%s: Ctl#%d: message to async I/O thread, continuing DMA transfer\n", __FUNCTION__, ATACONTROLLER_IDX(pCtl))); ataAsyncIOPutRequest(pCtl, &g_ataDMARequest); } #else /* !IN_RING3 */ AssertMsgFailed(("DMA START handling is too complicated for GC\n")); #endif /* IN_RING3 */ } } static uint32_t ataBMDMAStatusReadB(PATACONTROLLER pCtl, uint32_t addr) { uint32_t val = pCtl->BmDma.u8Status; Log2(("%s: addr=%#06x val=%#04x\n", __FUNCTION__, addr, val)); return val; } static void ataBMDMAStatusWriteB(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { Log2(("%s: addr=%#06x val=%#04x\n", __FUNCTION__, addr, val)); pCtl->BmDma.u8Status = (val & (BM_STATUS_D0DMA | BM_STATUS_D1DMA)) | (pCtl->BmDma.u8Status & BM_STATUS_DMAING) | (pCtl->BmDma.u8Status & ~val & (BM_STATUS_ERROR | BM_STATUS_INT)); } static uint32_t ataBMDMAAddrReadL(PATACONTROLLER pCtl, uint32_t addr) { uint32_t val = (uint32_t)pCtl->BmDma.pvAddr; Log2(("%s: addr=%#06x val=%#010x\n", __FUNCTION__, addr, val)); return val; } static void ataBMDMAAddrWriteL(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { Log2(("%s: addr=%#06x val=%#010x\n", __FUNCTION__, addr, val)); pCtl->BmDma.pvAddr = val & ~3; } static void ataBMDMAAddrWriteLowWord(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { Log2(("%s: addr=%#06x val=%#010x\n", __FUNCTION__, addr, val)); pCtl->BmDma.pvAddr = (pCtl->BmDma.pvAddr & 0xFFFF0000) | RT_LOWORD(val & ~3); } static void ataBMDMAAddrWriteHighWord(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { Log2(("%s: addr=%#06x val=%#010x\n", __FUNCTION__, addr, val)); pCtl->BmDma.pvAddr = (RT_LOWORD(val) << 16) | RT_LOWORD(pCtl->BmDma.pvAddr); } #define VAL(port, size) ( ((port) & 7) | ((size) << 3) ) /** * Port I/O Handler for bus master DMA IN operations. * @see FNIOMIOPORTIN for details. */ PDMBOTHCBDECL(int) ataBMDMAIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { uint32_t i = (uint32_t)(uintptr_t)pvUser; PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl = &pThis->aCts[i]; int rc = PDMCritSectEnter(&pCtl->lock, VINF_IOM_R3_IOPORT_READ); if (rc != VINF_SUCCESS) return rc; switch (VAL(Port, cb)) { case VAL(0, 1): *pu32 = ataBMDMACmdReadB(pCtl, Port); break; case VAL(0, 2): *pu32 = ataBMDMACmdReadB(pCtl, Port); break; case VAL(2, 1): *pu32 = ataBMDMAStatusReadB(pCtl, Port); break; case VAL(2, 2): *pu32 = ataBMDMAStatusReadB(pCtl, Port); break; case VAL(4, 4): *pu32 = ataBMDMAAddrReadL(pCtl, Port); break; case VAL(0, 4): /* The SCO OpenServer tries to read 4 bytes starting from offset 0. */ *pu32 = ataBMDMACmdReadB(pCtl, Port) | (ataBMDMAStatusReadB(pCtl, Port) << 16); break; default: AssertMsgFailed(("%s: Unsupported read from port %x size=%d\n", __FUNCTION__, Port, cb)); PDMCritSectLeave(&pCtl->lock); return VERR_IOM_IOPORT_UNUSED; } PDMCritSectLeave(&pCtl->lock); return rc; } /** * Port I/O Handler for bus master DMA OUT operations. * @see FNIOMIOPORTOUT for details. */ PDMBOTHCBDECL(int) ataBMDMAIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { uint32_t i = (uint32_t)(uintptr_t)pvUser; PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl = &pThis->aCts[i]; int rc = PDMCritSectEnter(&pCtl->lock, VINF_IOM_R3_IOPORT_WRITE); if (rc != VINF_SUCCESS) return rc; switch (VAL(Port, cb)) { case VAL(0, 1): #ifndef IN_RING3 if (u32 & BM_CMD_START) { rc = VINF_IOM_R3_IOPORT_WRITE; break; } #endif /* !IN_RING3 */ ataBMDMACmdWriteB(pCtl, Port, u32); break; case VAL(2, 1): ataBMDMAStatusWriteB(pCtl, Port, u32); break; case VAL(4, 4): ataBMDMAAddrWriteL(pCtl, Port, u32); break; case VAL(4, 2): ataBMDMAAddrWriteLowWord(pCtl, Port, u32); break; case VAL(6, 2): ataBMDMAAddrWriteHighWord(pCtl, Port, u32); break; default: AssertMsgFailed(("%s: Unsupported write to port %x size=%d val=%x\n", __FUNCTION__, Port, cb, u32)); break; } PDMCritSectLeave(&pCtl->lock); return rc; } #undef VAL #ifdef IN_RING3 /** * Callback function for mapping an PCI I/O region. * * @return VBox status code. * @param pPciDev Pointer to PCI device. Use pPciDev->pDevIns to get the device instance. * @param iRegion The region number. * @param GCPhysAddress Physical address of the region. If iType is PCI_ADDRESS_SPACE_IO, this is an * I/O port, else it's a physical address. * This address is *NOT* relative to pci_mem_base like earlier! * @param enmType One of the PCI_ADDRESS_SPACE_* values. */ static DECLCALLBACK(int) ataBMDMAIORangeMap(PPCIDEVICE pPciDev, /*unsigned*/ int iRegion, RTGCPHYS GCPhysAddress, uint32_t cb, PCIADDRESSSPACE enmType) { PCIATAState *pThis = PCIDEV_2_PCIATASTATE(pPciDev); int rc = VINF_SUCCESS; Assert(enmType == PCI_ADDRESS_SPACE_IO); Assert(iRegion == 4); AssertMsg(RT_ALIGN(GCPhysAddress, 8) == GCPhysAddress, ("Expected 8 byte alignment. GCPhysAddress=%#x\n", GCPhysAddress)); /* Register the port range. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { int rc2 = PDMDevHlpIOPortRegister(pPciDev->pDevIns, (RTIOPORT)GCPhysAddress + i * 8, 8, (RTHCPTR)(uintptr_t)i, ataBMDMAIOPortWrite, ataBMDMAIOPortRead, NULL, NULL, "ATA Bus Master DMA"); AssertRC(rc2); if (rc2 < rc) rc = rc2; if (pThis->fGCEnabled) { rc2 = PDMDevHlpIOPortRegisterRC(pPciDev->pDevIns, (RTIOPORT)GCPhysAddress + i * 8, 8, (RTGCPTR)i, "ataBMDMAIOPortWrite", "ataBMDMAIOPortRead", NULL, NULL, "ATA Bus Master DMA"); AssertRC(rc2); if (rc2 < rc) rc = rc2; } if (pThis->fR0Enabled) { rc2 = PDMDevHlpIOPortRegisterR0(pPciDev->pDevIns, (RTIOPORT)GCPhysAddress + i * 8, 8, (RTR0PTR)i, "ataBMDMAIOPortWrite", "ataBMDMAIOPortRead", NULL, NULL, "ATA Bus Master DMA"); AssertRC(rc2); if (rc2 < rc) rc = rc2; } } return rc; } /* -=-=-=-=-=- PCIATAState::IBase -=-=-=-=-=- */ /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) ataStatus_QueryInterface(PPDMIBASE pInterface, const char *pszIID) { PCIATAState *pThis = PDMIBASE_2_PCIATASTATE(pInterface); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMILEDPORTS, &pThis->ILeds); return NULL; } /* -=-=-=-=-=- PCIATAState::ILeds -=-=-=-=-=- */ /** * Gets the pointer to the status LED of a unit. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit which status LED we desire. * @param ppLed Where to store the LED pointer. */ static DECLCALLBACK(int) ataStatus_QueryStatusLed(PPDMILEDPORTS pInterface, unsigned iLUN, PPDMLED *ppLed) { PCIATAState *pThis = PDMILEDPORTS_2_PCIATASTATE(pInterface); if (iLUN < 4) { switch (iLUN) { case 0: *ppLed = &pThis->aCts[0].aIfs[0].Led; break; case 1: *ppLed = &pThis->aCts[0].aIfs[1].Led; break; case 2: *ppLed = &pThis->aCts[1].aIfs[0].Led; break; case 3: *ppLed = &pThis->aCts[1].aIfs[1].Led; break; } Assert((*ppLed)->u32Magic == PDMLED_MAGIC); return VINF_SUCCESS; } return VERR_PDM_LUN_NOT_FOUND; } /* -=-=-=-=-=- ATADevState::IBase -=-=-=-=-=- */ /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) ataQueryInterface(PPDMIBASE pInterface, const char *pszIID) { ATADevState *pIf = PDMIBASE_2_ATASTATE(pInterface); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pIf->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBLOCKPORT, &pIf->IPort); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMOUNTNOTIFY, &pIf->IMountNotify); return NULL; } /* -=-=-=-=-=- ATADevState::IPort -=-=-=-=-=- */ /** * @interface_method_impl{PDMIBLOCKPORT,pfnQueryDeviceLocation} */ static DECLCALLBACK(int) ataR3QueryDeviceLocation(PPDMIBLOCKPORT pInterface, const char **ppcszController, uint32_t *piInstance, uint32_t *piLUN) { ATADevState *pIf = PDMIBLOCKPORT_2_ATASTATE(pInterface); PPDMDEVINS pDevIns = pIf->CTX_SUFF(pDevIns); AssertPtrReturn(ppcszController, VERR_INVALID_POINTER); AssertPtrReturn(piInstance, VERR_INVALID_POINTER); AssertPtrReturn(piLUN, VERR_INVALID_POINTER); *ppcszController = pDevIns->pReg->szName; *piInstance = pDevIns->iInstance; *piLUN = pIf->iLUN; return VINF_SUCCESS; } #endif /* IN_RING3 */ /* -=-=-=-=-=- Wrappers -=-=-=-=-=- */ /** * Port I/O Handler for primary port range OUT operations. * @see FNIOMIOPORTOUT for details. */ PDMBOTHCBDECL(int) ataIOPortWrite1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { uint32_t i = (uint32_t)(uintptr_t)pvUser; PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl = &pThis->aCts[i]; int rc = VINF_SUCCESS; Assert(i < 2); rc = PDMCritSectEnter(&pCtl->lock, VINF_IOM_R3_IOPORT_WRITE); if (rc != VINF_SUCCESS) return rc; if (Port == pCtl->IOPortBase1) { /* Writes to the data port may be 16-bit or 32-bit. */ Assert(cb == 2 || cb == 4); rc = ataDataWrite(pCtl, Port, cb, (const uint8_t *)&u32); } else { /* Writes to the other command block ports should be 8-bit only. If they * are not, the high bits are simply discarded. Undocumented, but observed * on a real PIIX4 system. */ if (cb > 1) Log(("ataIOPortWrite1: suspect write to port %x val=%x size=%d\n", Port, u32, cb)); rc = ataIOPortWriteU8(pCtl, Port, u32); } PDMCritSectLeave(&pCtl->lock); return rc; } /** * Port I/O Handler for primary port range IN operations. * @see FNIOMIOPORTIN for details. */ PDMBOTHCBDECL(int) ataIOPortRead1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { uint32_t i = (uint32_t)(uintptr_t)pvUser; PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl = &pThis->aCts[i]; int rc = VINF_SUCCESS; Assert(i < 2); rc = PDMCritSectEnter(&pCtl->lock, VINF_IOM_R3_IOPORT_READ); if (rc != VINF_SUCCESS) return rc; if (Port == pCtl->IOPortBase1) { /* Reads from the data register may be 16-bit or 32-bit. */ Assert(cb == 2 || cb == 4); rc = ataDataRead(pCtl, Port, cb, (uint8_t *)pu32); if (cb == 2) *pu32 &= 0xffff; } else { /* Reads from the other command block registers should be 8-bit only. * If they are not, the low byte is propagated to the high bits. * Undocumented, but observed on a real PIIX4 system. */ rc = ataIOPortReadU8(pCtl, Port, pu32); if (cb > 1) { uint32_t pad; /* Replicate the 8-bit result into the upper three bytes. */ pad = *pu32 & 0xff; pad = pad | (pad << 8); pad = pad | (pad << 16); *pu32 = pad; Log(("ataIOPortRead1: suspect read from port %x size=%d\n", Port, cb)); } } PDMCritSectLeave(&pCtl->lock); return rc; } #ifndef IN_RING0 /** @todo do this in ring-0 as well. */ /** * Port I/O Handler for primary port range IN string operations. * @see FNIOMIOPORTINSTRING for details. */ PDMBOTHCBDECL(int) ataIOPortReadStr1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrDst, PRTGCUINTREG pcTransfer, unsigned cb) { uint32_t i = (uint32_t)(uintptr_t)pvUser; PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl = &pThis->aCts[i]; int rc = VINF_SUCCESS; Assert(i < 2); rc = PDMCritSectEnter(&pCtl->lock, VINF_IOM_R3_IOPORT_READ); if (rc != VINF_SUCCESS) return rc; if (Port == pCtl->IOPortBase1) { uint32_t cTransAvailable, cTransfer = *pcTransfer, cbTransfer; RTGCPTR GCDst = *pGCPtrDst; ATADevState *s = &pCtl->aIfs[pCtl->iSelectedIf]; Assert(cb == 2 || cb == 4); cTransAvailable = (s->iIOBufferPIODataEnd - s->iIOBufferPIODataStart) / cb; #ifndef IN_RING3 /* Deal with the unlikely case where no data (or not enough for the read length operation) is available; go back to ring 3. */ if (!cTransAvailable) { PDMCritSectLeave(&pCtl->lock); return VINF_IOM_R3_IOPORT_READ; } /* The last transfer unit cannot be handled in GC, as it involves thread communication. */ cTransAvailable--; #endif /* !IN_RING3 */ /* Do not handle the dummy transfer stuff here, leave it to the single-word transfers. * They are not performance-critical and generally shouldn't occur at all. */ if (cTransAvailable > cTransfer) cTransAvailable = cTransfer; cbTransfer = cTransAvailable * cb; rc = PGMPhysSimpleDirtyWriteGCPtr(PDMDevHlpGetVMCPU(pDevIns), GCDst, s->CTX_SUFF(pbIOBuffer) + s->iIOBufferPIODataStart, cbTransfer); #ifndef IN_RING3 /* Paranoia. */ if (RT_FAILURE(rc)) { PDMCritSectLeave(&pCtl->lock); AssertFailed(); return VINF_IOM_R3_IOPORT_READ; } #else Assert(rc == VINF_SUCCESS); #endif if (cbTransfer) Log3(("%s: addr=%#x val=%.*Rhxs\n", __FUNCTION__, Port, cbTransfer, s->CTX_SUFF(pbIOBuffer) + s->iIOBufferPIODataStart)); s->iIOBufferPIODataStart += cbTransfer; *pGCPtrDst = (RTGCPTR)((RTGCUINTPTR)GCDst + cbTransfer); *pcTransfer = cTransfer - cTransAvailable; #ifdef IN_RING3 if (s->iIOBufferPIODataStart >= s->iIOBufferPIODataEnd) ataPIOTransferFinish(pCtl, s); #endif /* IN_RING3 */ } PDMCritSectLeave(&pCtl->lock); return rc; } /** * Port I/O Handler for primary port range OUT string operations. * @see FNIOMIOPORTOUTSTRING for details. */ PDMBOTHCBDECL(int) ataIOPortWriteStr1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrSrc, PRTGCUINTREG pcTransfer, unsigned cb) { uint32_t i = (uint32_t)(uintptr_t)pvUser; PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl = &pThis->aCts[i]; int rc; Assert(i < 2); rc = PDMCritSectEnter(&pCtl->lock, VINF_IOM_R3_IOPORT_WRITE); if (rc != VINF_SUCCESS) return rc; if (Port == pCtl->IOPortBase1) { uint32_t cTransAvailable, cTransfer = *pcTransfer, cbTransfer; RTGCPTR GCSrc = *pGCPtrSrc; ATADevState *s = &pCtl->aIfs[pCtl->iSelectedIf]; Assert(cb == 2 || cb == 4); cTransAvailable = (s->iIOBufferPIODataEnd - s->iIOBufferPIODataStart) / cb; #ifndef IN_RING3 /* Deal with the unlikely case where no data (or not enough for the read length operation) is available; go back to ring 3. */ if (!cTransAvailable) { PDMCritSectLeave(&pCtl->lock); return VINF_IOM_R3_IOPORT_WRITE; } /* The last transfer unit cannot be handled in GC, as it involves thread communication. */ cTransAvailable--; #endif /* !IN_RING3 */ /* Do not handle the dummy transfer stuff here, leave it to the single-word transfers. * They are not performance-critical and generally shouldn't occur at all. */ if (cTransAvailable > cTransfer) cTransAvailable = cTransfer; cbTransfer = cTransAvailable * cb; rc = PGMPhysSimpleReadGCPtr(PDMDevHlpGetVMCPU(pDevIns), s->CTX_SUFF(pbIOBuffer) + s->iIOBufferPIODataStart, GCSrc, cbTransfer); #ifndef IN_RING3 /* Paranoia. */ if (RT_FAILURE(rc)) { PDMCritSectLeave(&pCtl->lock); AssertFailed(); return VINF_IOM_R3_IOPORT_WRITE; } #else Assert(rc == VINF_SUCCESS); #endif if (cbTransfer) Log3(("%s: addr=%#x val=%.*Rhxs\n", __FUNCTION__, Port, cbTransfer, s->CTX_SUFF(pbIOBuffer) + s->iIOBufferPIODataStart)); s->iIOBufferPIODataStart += cbTransfer; *pGCPtrSrc = (RTGCPTR)((RTGCUINTPTR)GCSrc + cbTransfer); *pcTransfer = cTransfer - cTransAvailable; #ifdef IN_RING3 if (s->iIOBufferPIODataStart >= s->iIOBufferPIODataEnd) ataPIOTransferFinish(pCtl, s); #endif /* IN_RING3 */ } PDMCritSectLeave(&pCtl->lock); return rc; } #endif /* !IN_RING0 */ /** * Port I/O Handler for secondary port range OUT operations. * @see FNIOMIOPORTOUT for details. */ PDMBOTHCBDECL(int) ataIOPortWrite2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { uint32_t i = (uint32_t)(uintptr_t)pvUser; PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl = &pThis->aCts[i]; int rc; Assert(i < 2); if (cb != 1) return VINF_SUCCESS; rc = PDMCritSectEnter(&pCtl->lock, VINF_IOM_R3_IOPORT_WRITE); if (rc != VINF_SUCCESS) return rc; rc = ataControlWrite(pCtl, Port, u32); PDMCritSectLeave(&pCtl->lock); return rc; } /** * Port I/O Handler for secondary port range IN operations. * @see FNIOMIOPORTIN for details. */ PDMBOTHCBDECL(int) ataIOPortRead2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { uint32_t i = (uint32_t)(uintptr_t)pvUser; PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl = &pThis->aCts[i]; int rc; Assert(i < 2); if (cb != 1) return VERR_IOM_IOPORT_UNUSED; rc = PDMCritSectEnter(&pCtl->lock, VINF_IOM_R3_IOPORT_READ); if (rc != VINF_SUCCESS) return rc; *pu32 = ataStatusRead(pCtl, Port); PDMCritSectLeave(&pCtl->lock); return VINF_SUCCESS; } #ifdef IN_RING3 DECLINLINE(void) ataRelocBuffer(PPDMDEVINS pDevIns, ATADevState *s) { if (s->pbIOBufferR3) s->pbIOBufferRC = MMHyperR3ToRC(PDMDevHlpGetVM(pDevIns), s->pbIOBufferR3); } /** * Detach notification. * * The DVD drive has been unplugged. * * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(void) ataR3Detach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl; ATADevState *pIf; unsigned iController; unsigned iInterface; AssertMsg(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG, ("PIIX3IDE: Device does not support hotplugging\n")); /* * Locate the controller and stuff. */ iController = iLUN / RT_ELEMENTS(pThis->aCts[0].aIfs); AssertReleaseMsg(iController < RT_ELEMENTS(pThis->aCts), ("iController=%d iLUN=%d\n", iController, iLUN)); pCtl = &pThis->aCts[iController]; iInterface = iLUN % RT_ELEMENTS(pThis->aCts[0].aIfs); pIf = &pCtl->aIfs[iInterface]; /* * Zero some important members. */ pIf->pDrvBase = NULL; pIf->pDrvBlock = NULL; pIf->pDrvBlockBios = NULL; pIf->pDrvMount = NULL; /* * In case there was a medium inserted. */ ataMediumRemoved(pIf); } /** * Configure a LUN. * * @returns VBox status code. * @param pDevIns The device instance. * @param pIf The ATA unit state. */ static int ataConfigLun(PPDMDEVINS pDevIns, ATADevState *pIf) { int rc = VINF_SUCCESS; PDMBLOCKTYPE enmType; /* * Query Block, Bios and Mount interfaces. */ pIf->pDrvBlock = PDMIBASE_QUERY_INTERFACE(pIf->pDrvBase, PDMIBLOCK); if (!pIf->pDrvBlock) { AssertMsgFailed(("Configuration error: LUN#%d hasn't a block interface!\n", pIf->iLUN)); return VERR_PDM_MISSING_INTERFACE; } /** @todo implement the BIOS invisible code path. */ pIf->pDrvBlockBios = PDMIBASE_QUERY_INTERFACE(pIf->pDrvBase, PDMIBLOCKBIOS); if (!pIf->pDrvBlockBios) { AssertMsgFailed(("Configuration error: LUN#%d hasn't a block BIOS interface!\n", pIf->iLUN)); return VERR_PDM_MISSING_INTERFACE; } pIf->pDrvMount = PDMIBASE_QUERY_INTERFACE(pIf->pDrvBase, PDMIMOUNT); /* * Validate type. */ enmType = pIf->pDrvBlock->pfnGetType(pIf->pDrvBlock); if ( enmType != PDMBLOCKTYPE_CDROM && enmType != PDMBLOCKTYPE_DVD && enmType != PDMBLOCKTYPE_HARD_DISK) { AssertMsgFailed(("Configuration error: LUN#%d isn't a disk or cd/dvd-rom. enmType=%d\n", pIf->iLUN, enmType)); return VERR_PDM_UNSUPPORTED_BLOCK_TYPE; } if ( ( enmType == PDMBLOCKTYPE_DVD || enmType == PDMBLOCKTYPE_CDROM) && !pIf->pDrvMount) { AssertMsgFailed(("Internal error: cdrom without a mountable interface, WTF???!\n")); return VERR_INTERNAL_ERROR; } pIf->fATAPI = enmType == PDMBLOCKTYPE_DVD || enmType == PDMBLOCKTYPE_CDROM; pIf->fATAPIPassthrough = pIf->fATAPI ? (pIf->pDrvBlock->pfnSendCmd != NULL) : false; /* * Allocate I/O buffer. */ PVM pVM = PDMDevHlpGetVM(pDevIns); if (pIf->cbIOBuffer) { /* Buffer is (probably) already allocated. Validate the fields, * because memory corruption can also overwrite pIf->cbIOBuffer. */ if (pIf->fATAPI) AssertRelease(pIf->cbIOBuffer == _128K); else AssertRelease(pIf->cbIOBuffer == ATA_MAX_MULT_SECTORS * 512); Assert(pIf->pbIOBufferR3); Assert(pIf->pbIOBufferR0 == MMHyperR3ToR0(pVM, pIf->pbIOBufferR3)); Assert(pIf->pbIOBufferRC == MMHyperR3ToRC(pVM, pIf->pbIOBufferR3)); } else { if (pIf->fATAPI) pIf->cbIOBuffer = _128K; else pIf->cbIOBuffer = ATA_MAX_MULT_SECTORS * 512; Assert(!pIf->pbIOBufferR3); rc = MMR3HyperAllocOnceNoRel(pVM, pIf->cbIOBuffer, 0, MM_TAG_PDM_DEVICE_USER, (void **)&pIf->pbIOBufferR3); if (RT_FAILURE(rc)) return VERR_NO_MEMORY; pIf->pbIOBufferR0 = MMHyperR3ToR0(pVM, pIf->pbIOBufferR3); pIf->pbIOBufferRC = MMHyperR3ToRC(pVM, pIf->pbIOBufferR3); } /* * Init geometry (only for non-CD/DVD media). */ if (pIf->fATAPI) { pIf->cTotalSectors = pIf->pDrvBlock->pfnGetSize(pIf->pDrvBlock) / 2048; pIf->PCHSGeometry.cCylinders = 0; /* dummy */ pIf->PCHSGeometry.cHeads = 0; /* dummy */ pIf->PCHSGeometry.cSectors = 0; /* dummy */ LogRel(("PIIX3 ATA: LUN#%d: CD/DVD, total number of sectors %Ld, passthrough %s\n", pIf->iLUN, pIf->cTotalSectors, (pIf->fATAPIPassthrough ? "enabled" : "disabled"))); } else { pIf->cTotalSectors = pIf->pDrvBlock->pfnGetSize(pIf->pDrvBlock) / 512; rc = pIf->pDrvBlockBios->pfnGetPCHSGeometry(pIf->pDrvBlockBios, &pIf->PCHSGeometry); if (rc == VERR_PDM_MEDIA_NOT_MOUNTED) { pIf->PCHSGeometry.cCylinders = 0; pIf->PCHSGeometry.cHeads = 16; /*??*/ pIf->PCHSGeometry.cSectors = 63; /*??*/ } else if (rc == VERR_PDM_GEOMETRY_NOT_SET) { pIf->PCHSGeometry.cCylinders = 0; /* autodetect marker */ rc = VINF_SUCCESS; } AssertRC(rc); if ( pIf->PCHSGeometry.cCylinders == 0 || pIf->PCHSGeometry.cHeads == 0 || pIf->PCHSGeometry.cSectors == 0 ) { uint64_t cCylinders = pIf->cTotalSectors / (16 * 63); pIf->PCHSGeometry.cCylinders = RT_MAX(RT_MIN(cCylinders, 16383), 1); pIf->PCHSGeometry.cHeads = 16; pIf->PCHSGeometry.cSectors = 63; /* Set the disk geometry information. Ignore errors. */ pIf->pDrvBlockBios->pfnSetPCHSGeometry(pIf->pDrvBlockBios, &pIf->PCHSGeometry); rc = VINF_SUCCESS; } LogRel(("PIIX3 ATA: LUN#%d: disk, PCHS=%u/%u/%u, total number of sectors %Ld\n", pIf->iLUN, pIf->PCHSGeometry.cCylinders, pIf->PCHSGeometry.cHeads, pIf->PCHSGeometry.cSectors, pIf->cTotalSectors)); if (pIf->pDrvBlock->pfnDiscard) LogRel(("PIIX3 ATA: LUN#%d: TRIM enabled\n", pIf->iLUN)); } return rc; } /** * Attach command. * * This is called when we change block driver for the DVD drive. * * @returns VBox status code. * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(int) ataR3Attach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PATACONTROLLER pCtl; ATADevState *pIf; int rc; unsigned iController; unsigned iInterface; AssertMsgReturn(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG, ("PIIX3IDE: Device does not support hotplugging\n"), VERR_INVALID_PARAMETER); /* * Locate the controller and stuff. */ iController = iLUN / RT_ELEMENTS(pThis->aCts[0].aIfs); AssertReleaseMsg(iController < RT_ELEMENTS(pThis->aCts), ("iController=%d iLUN=%d\n", iController, iLUN)); pCtl = &pThis->aCts[iController]; iInterface = iLUN % RT_ELEMENTS(pThis->aCts[0].aIfs); pIf = &pCtl->aIfs[iInterface]; /* the usual paranoia */ AssertRelease(!pIf->pDrvBase); AssertRelease(!pIf->pDrvBlock); Assert(ATADEVSTATE_2_CONTROLLER(pIf) == pCtl); Assert(pIf->iLUN == iLUN); /* * Try attach the block device and get the interfaces, * required as well as optional. */ rc = PDMDevHlpDriverAttach(pDevIns, pIf->iLUN, &pIf->IBase, &pIf->pDrvBase, NULL); if (RT_SUCCESS(rc)) { rc = ataConfigLun(pDevIns, pIf); /* * In case there is a medium inserted. */ ataMediumInserted(pIf); ataMediumTypeSet(pIf, ATA_MEDIA_TYPE_UNKNOWN); } else AssertMsgFailed(("Failed to attach LUN#%d. rc=%Rrc\n", pIf->iLUN, rc)); if (RT_FAILURE(rc)) { pIf->pDrvBase = NULL; pIf->pDrvBlock = NULL; } return rc; } /** * Resume notification. * * @returns VBox status. * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ataR3Resume(PPDMDEVINS pDevIns) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); int rc; Log(("%s:\n", __FUNCTION__)); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThis->aCts[i].fRedo && pThis->aCts[i].fRedoIdle) { rc = RTSemEventSignal(pThis->aCts[i].SuspendIOSem); AssertRC(rc); } } return; } /** * Checks if all (both) the async I/O threads have quiesced. * * @returns true on success. * @returns false when one or more threads is still processing. * @param pThis Pointer to the instance data. */ static bool ataR3AllAsyncIOIsIdle(PPDMDEVINS pDevIns) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) if (pThis->aCts[i].AsyncIOThread != NIL_RTTHREAD) { bool fRc = ataAsyncIOIsIdle(&pThis->aCts[i], false /*fStrict*/); if (!fRc) { /* Make it signal PDM & itself when its done */ RTSemMutexRequest(pThis->aCts[i].AsyncIORequestMutex, RT_INDEFINITE_WAIT); ASMAtomicWriteBool(&pThis->aCts[i].fSignalIdle, true); RTSemMutexRelease(pThis->aCts[i].AsyncIORequestMutex); fRc = ataAsyncIOIsIdle(&pThis->aCts[i], false /*fStrict*/); if (!fRc) { #if 0 /** @todo Need to do some time tracking here... */ LogRel(("PIIX3 ATA: Ctl#%u is still executing, DevSel=%d AIOIf=%d CmdIf0=%#04x CmdIf1=%#04x\n", i, pThis->aCts[i].iSelectedIf, pThis->aCts[i].iAIOIf, pThis->aCts[i].aIfs[0].uATARegCommand, pThis->aCts[i].aIfs[1].uATARegCommand)); #endif return false; } } ASMAtomicWriteBool(&pThis->aCts[i].fSignalIdle, false); } return true; } /** * Prepare state save and load operation. * * @returns VBox status code. * @param pDevIns Device instance of the device which registered the data unit. * @param pSSM SSM operation handle. */ static DECLCALLBACK(int) ataSaveLoadPrep(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); /* sanity - the suspend notification will wait on the async stuff. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) AssertLogRelMsgReturn(ataAsyncIOIsIdle(&pThis->aCts[i], false /*fStrict*/), ("i=%u\n", i), VERR_SSM_IDE_ASYNC_TIMEOUT); return VINF_SUCCESS; } /** * @copydoc FNSSMDEVLIVEEXEC */ static DECLCALLBACK(int) ataLiveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uPass) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); SSMR3PutU8(pSSM, pThis->u8Type); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { SSMR3PutBool(pSSM, true); /* For controller enabled / disabled. */ for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { SSMR3PutBool(pSSM, pThis->aCts[i].aIfs[j].pDrvBase != NULL); SSMR3PutStrZ(pSSM, pThis->aCts[i].aIfs[j].szSerialNumber); SSMR3PutStrZ(pSSM, pThis->aCts[i].aIfs[j].szFirmwareRevision); SSMR3PutStrZ(pSSM, pThis->aCts[i].aIfs[j].szModelNumber); } } return VINF_SSM_DONT_CALL_AGAIN; } /** * @copydoc FNSSMDEVSAVEEXEC */ static DECLCALLBACK(int) ataSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); ataLiveExec(pDevIns, pSSM, SSM_PASS_FINAL); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { SSMR3PutU8(pSSM, pThis->aCts[i].iSelectedIf); SSMR3PutU8(pSSM, pThis->aCts[i].iAIOIf); SSMR3PutU8(pSSM, pThis->aCts[i].uAsyncIOState); SSMR3PutBool(pSSM, pThis->aCts[i].fChainedTransfer); SSMR3PutBool(pSSM, pThis->aCts[i].fReset); SSMR3PutBool(pSSM, pThis->aCts[i].fRedo); SSMR3PutBool(pSSM, pThis->aCts[i].fRedoIdle); SSMR3PutBool(pSSM, pThis->aCts[i].fRedoDMALastDesc); SSMR3PutMem(pSSM, &pThis->aCts[i].BmDma, sizeof(pThis->aCts[i].BmDma)); SSMR3PutGCPhys32(pSSM, pThis->aCts[i].pFirstDMADesc); SSMR3PutGCPhys32(pSSM, pThis->aCts[i].pLastDMADesc); SSMR3PutGCPhys32(pSSM, pThis->aCts[i].pRedoDMABuffer); SSMR3PutU32(pSSM, pThis->aCts[i].cbRedoDMABuffer); for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { SSMR3PutBool(pSSM, pThis->aCts[i].aIfs[j].fLBA48); SSMR3PutBool(pSSM, pThis->aCts[i].aIfs[j].fATAPI); SSMR3PutBool(pSSM, pThis->aCts[i].aIfs[j].fIrqPending); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].cMultSectors); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].PCHSGeometry.cCylinders); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].PCHSGeometry.cHeads); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].PCHSGeometry.cSectors); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].cSectorsPerIRQ); SSMR3PutU64(pSSM, pThis->aCts[i].aIfs[j].cTotalSectors); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegFeature); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegFeatureHOB); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegError); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegNSector); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegNSectorHOB); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegSector); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegSectorHOB); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegLCyl); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegLCylHOB); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegHCyl); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegHCylHOB); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegSelect); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegStatus); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegCommand); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegDevCtl); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uATATransferMode); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].uTxDir); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].iBeginTransfer); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].iSourceSink); SSMR3PutBool(pSSM, pThis->aCts[i].aIfs[j].fDMA); SSMR3PutBool(pSSM, pThis->aCts[i].aIfs[j].fATAPITransfer); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].cbTotalTransfer); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].cbElementaryTransfer); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].iIOBufferCur); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].iIOBufferEnd); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].iIOBufferPIODataStart); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].iIOBufferPIODataEnd); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].iATAPILBA); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].cbATAPISector); SSMR3PutMem(pSSM, &pThis->aCts[i].aIfs[j].aATAPICmd, sizeof(pThis->aCts[i].aIfs[j].aATAPICmd)); SSMR3PutMem(pSSM, &pThis->aCts[i].aIfs[j].abATAPISense, sizeof(pThis->aCts[i].aIfs[j].abATAPISense)); SSMR3PutU8(pSSM, pThis->aCts[i].aIfs[j].cNotifiedMediaChange); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].MediaEventStatus); SSMR3PutMem(pSSM, &pThis->aCts[i].aIfs[j].Led, sizeof(pThis->aCts[i].aIfs[j].Led)); SSMR3PutU32(pSSM, pThis->aCts[i].aIfs[j].cbIOBuffer); if (pThis->aCts[i].aIfs[j].cbIOBuffer) SSMR3PutMem(pSSM, pThis->aCts[i].aIfs[j].CTX_SUFF(pbIOBuffer), pThis->aCts[i].aIfs[j].cbIOBuffer); else Assert(pThis->aCts[i].aIfs[j].CTX_SUFF(pbIOBuffer) == NULL); } } return SSMR3PutU32(pSSM, ~0); /* sanity/terminator */ } /** * Converts the LUN number into a message string. */ static const char *ataStringifyLun(unsigned iLun) { switch (iLun) { case 0: return "primary master"; case 1: return "primary slave"; case 2: return "secondary master"; case 3: return "secondary slave"; default: AssertFailedReturn("unknown lun"); } } /** * FNSSMDEVLOADEXEC */ static DECLCALLBACK(int) ataLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); int rc; uint32_t u32; if ( uVersion != ATA_SAVED_STATE_VERSION && uVersion != ATA_SAVED_STATE_VERSION_VBOX_30 && uVersion != ATA_SAVED_STATE_VERSION_WITHOUT_FULL_SENSE && uVersion != ATA_SAVED_STATE_VERSION_WITHOUT_EVENT_STATUS && uVersion != ATA_SAVED_STATE_VERSION_WITH_BOOL_TYPE) { AssertMsgFailed(("uVersion=%d\n", uVersion)); return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; } /* * Verify the configuration. */ if (uVersion > ATA_SAVED_STATE_VERSION_VBOX_30) { uint8_t u8Type; rc = SSMR3GetU8(pSSM, &u8Type); AssertRCReturn(rc, rc); if (u8Type != pThis->u8Type) return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("Config mismatch: u8Type - saved=%u config=%u"), u8Type, pThis->u8Type); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { bool fEnabled; rc = SSMR3GetBool(pSSM, &fEnabled); AssertRCReturn(rc, rc); if (!fEnabled) return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("Ctr#%u onfig mismatch: fEnabled != true"), i); for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { ATADevState const *pIf = &pThis->aCts[i].aIfs[j]; bool fInUse; rc = SSMR3GetBool(pSSM, &fInUse); AssertRCReturn(rc, rc); if (fInUse != (pIf->pDrvBase != NULL)) return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("The %s VM is missing a %s device. Please make sure the source and target VMs have compatible storage configurations"), fInUse ? "target" : "source", ataStringifyLun(pIf->iLUN) ); char szSerialNumber[ATA_SERIAL_NUMBER_LENGTH+1]; rc = SSMR3GetStrZ(pSSM, szSerialNumber, sizeof(szSerialNumber)); AssertRCReturn(rc, rc); if (strcmp(szSerialNumber, pIf->szSerialNumber)) LogRel(("PIIX3 ATA: LUN#%u config mismatch: Serial number - saved='%s' config='%s'\n", pIf->iLUN, szSerialNumber, pIf->szSerialNumber)); char szFirmwareRevision[ATA_FIRMWARE_REVISION_LENGTH+1]; rc = SSMR3GetStrZ(pSSM, szFirmwareRevision, sizeof(szFirmwareRevision)); AssertRCReturn(rc, rc); if (strcmp(szFirmwareRevision, pIf->szFirmwareRevision)) LogRel(("PIIX3 ATA: LUN#%u config mismatch: Firmware revision - saved='%s' config='%s'\n", pIf->iLUN, szFirmwareRevision, pIf->szFirmwareRevision)); char szModelNumber[ATA_MODEL_NUMBER_LENGTH+1]; rc = SSMR3GetStrZ(pSSM, szModelNumber, sizeof(szModelNumber)); AssertRCReturn(rc, rc); if (strcmp(szModelNumber, pIf->szModelNumber)) LogRel(("PIIX3 ATA: LUN#%u config mismatch: Model number - saved='%s' config='%s'\n", pIf->iLUN, szModelNumber, pIf->szModelNumber)); } } } if (uPass != SSM_PASS_FINAL) return VINF_SUCCESS; /* * Restore valid parts of the PCIATAState structure */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { /* integrity check */ if (!ataAsyncIOIsIdle(&pThis->aCts[i], false)) { AssertMsgFailed(("Async I/O for controller %d is active\n", i)); return VERR_INTERNAL_ERROR_4; } SSMR3GetU8(pSSM, &pThis->aCts[i].iSelectedIf); SSMR3GetU8(pSSM, &pThis->aCts[i].iAIOIf); SSMR3GetU8(pSSM, &pThis->aCts[i].uAsyncIOState); SSMR3GetBool(pSSM, &pThis->aCts[i].fChainedTransfer); SSMR3GetBool(pSSM, (bool *)&pThis->aCts[i].fReset); SSMR3GetBool(pSSM, (bool *)&pThis->aCts[i].fRedo); SSMR3GetBool(pSSM, (bool *)&pThis->aCts[i].fRedoIdle); SSMR3GetBool(pSSM, (bool *)&pThis->aCts[i].fRedoDMALastDesc); SSMR3GetMem(pSSM, &pThis->aCts[i].BmDma, sizeof(pThis->aCts[i].BmDma)); SSMR3GetGCPhys32(pSSM, &pThis->aCts[i].pFirstDMADesc); SSMR3GetGCPhys32(pSSM, &pThis->aCts[i].pLastDMADesc); SSMR3GetGCPhys32(pSSM, &pThis->aCts[i].pRedoDMABuffer); SSMR3GetU32(pSSM, &pThis->aCts[i].cbRedoDMABuffer); for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { SSMR3GetBool(pSSM, &pThis->aCts[i].aIfs[j].fLBA48); SSMR3GetBool(pSSM, &pThis->aCts[i].aIfs[j].fATAPI); SSMR3GetBool(pSSM, &pThis->aCts[i].aIfs[j].fIrqPending); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].cMultSectors); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].PCHSGeometry.cCylinders); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].PCHSGeometry.cHeads); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].PCHSGeometry.cSectors); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].cSectorsPerIRQ); SSMR3GetU64(pSSM, &pThis->aCts[i].aIfs[j].cTotalSectors); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegFeature); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegFeatureHOB); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegError); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegNSector); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegNSectorHOB); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegSector); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegSectorHOB); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegLCyl); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegLCylHOB); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegHCyl); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegHCylHOB); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegSelect); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegStatus); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegCommand); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegDevCtl); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uATATransferMode); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].uTxDir); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].iBeginTransfer); SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].iSourceSink); SSMR3GetBool(pSSM, &pThis->aCts[i].aIfs[j].fDMA); SSMR3GetBool(pSSM, &pThis->aCts[i].aIfs[j].fATAPITransfer); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].cbTotalTransfer); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].cbElementaryTransfer); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].iIOBufferCur); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].iIOBufferEnd); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].iIOBufferPIODataStart); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].iIOBufferPIODataEnd); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].iATAPILBA); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].cbATAPISector); SSMR3GetMem(pSSM, &pThis->aCts[i].aIfs[j].aATAPICmd, sizeof(pThis->aCts[i].aIfs[j].aATAPICmd)); if (uVersion > ATA_SAVED_STATE_VERSION_WITHOUT_FULL_SENSE) { SSMR3GetMem(pSSM, pThis->aCts[i].aIfs[j].abATAPISense, sizeof(pThis->aCts[i].aIfs[j].abATAPISense)); } else { uint8_t uATAPISenseKey, uATAPIASC; memset(pThis->aCts[i].aIfs[j].abATAPISense, '\0', sizeof(pThis->aCts[i].aIfs[j].abATAPISense)); pThis->aCts[i].aIfs[j].abATAPISense[0] = 0x70 | (1 << 7); pThis->aCts[i].aIfs[j].abATAPISense[7] = 10; SSMR3GetU8(pSSM, &uATAPISenseKey); SSMR3GetU8(pSSM, &uATAPIASC); pThis->aCts[i].aIfs[j].abATAPISense[2] = uATAPISenseKey & 0x0f; pThis->aCts[i].aIfs[j].abATAPISense[12] = uATAPIASC; } /** @todo triple-check this hack after passthrough is working */ SSMR3GetU8(pSSM, &pThis->aCts[i].aIfs[j].cNotifiedMediaChange); if (uVersion > ATA_SAVED_STATE_VERSION_WITHOUT_EVENT_STATUS) SSMR3GetU32(pSSM, (uint32_t*)&pThis->aCts[i].aIfs[j].MediaEventStatus); else pThis->aCts[i].aIfs[j].MediaEventStatus = ATA_EVENT_STATUS_UNCHANGED; SSMR3GetMem(pSSM, &pThis->aCts[i].aIfs[j].Led, sizeof(pThis->aCts[i].aIfs[j].Led)); SSMR3GetU32(pSSM, &pThis->aCts[i].aIfs[j].cbIOBuffer); if (pThis->aCts[i].aIfs[j].cbIOBuffer) { if (pThis->aCts[i].aIfs[j].CTX_SUFF(pbIOBuffer)) SSMR3GetMem(pSSM, pThis->aCts[i].aIfs[j].CTX_SUFF(pbIOBuffer), pThis->aCts[i].aIfs[j].cbIOBuffer); else { LogRel(("ATA: No buffer for %d/%d\n", i, j)); if (SSMR3HandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT) return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("No buffer for %d/%d"), i, j); /* skip the buffer if we're loading for the debugger / animator. */ uint8_t u8Ignored; size_t cbLeft = pThis->aCts[i].aIfs[j].cbIOBuffer; while (cbLeft-- > 0) SSMR3GetU8(pSSM, &u8Ignored); } } else Assert(pThis->aCts[i].aIfs[j].CTX_SUFF(pbIOBuffer) == NULL); } } if (uVersion <= ATA_SAVED_STATE_VERSION_VBOX_30) SSMR3GetU8(pSSM, &pThis->u8Type); rc = SSMR3GetU32(pSSM, &u32); if (RT_FAILURE(rc)) return rc; if (u32 != ~0U) { AssertMsgFailed(("u32=%#x expected ~0\n", u32)); rc = VERR_SSM_DATA_UNIT_FORMAT_CHANGED; return rc; } return VINF_SUCCESS; } /** * Callback employed by ataSuspend and ataR3PowerOff. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) ataR3IsAsyncSuspendOrPowerOffDone(PPDMDEVINS pDevIns) { return ataR3AllAsyncIOIsIdle(pDevIns); } /** * Common worker for ataSuspend and ataR3PowerOff. */ static void ataR3SuspendOrPowerOff(PPDMDEVINS pDevIns) { if (!ataR3AllAsyncIOIsIdle(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, ataR3IsAsyncSuspendOrPowerOffDone); } /** * Power Off notification. * * @returns VBox status. * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ataR3PowerOff(PPDMDEVINS pDevIns) { Log(("%s:\n", __FUNCTION__)); ataR3SuspendOrPowerOff(pDevIns); } /** * Suspend notification. * * @returns VBox status. * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ataR3Suspend(PPDMDEVINS pDevIns) { Log(("%s:\n", __FUNCTION__)); ataR3SuspendOrPowerOff(pDevIns); } /** * Callback employed by ataR3Reset. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) ataR3IsAsyncResetDone(PPDMDEVINS pDevIns) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); if (!ataR3AllAsyncIOIsIdle(pDevIns)) return false; for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { PDMCritSectEnter(&pThis->aCts[i].lock, VERR_INTERNAL_ERROR); for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) ataResetDevice(&pThis->aCts[i].aIfs[j]); PDMCritSectLeave(&pThis->aCts[i].lock); } return true; } /** * Common reset worker for ataR3Reset and ataR3Construct. * * @returns VBox status. * @param pDevIns The device instance data. * @param fConstruct Indicates who is calling. */ static int ataR3ResetCommon(PPDMDEVINS pDevIns, bool fConstruct) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { PDMCritSectEnter(&pThis->aCts[i].lock, VERR_INTERNAL_ERROR); pThis->aCts[i].iSelectedIf = 0; pThis->aCts[i].iAIOIf = 0; pThis->aCts[i].BmDma.u8Cmd = 0; /* Report that both drives present on the bus are in DMA mode. This * pretends that there is a BIOS that has set it up. Normal reset * default is 0x00. */ pThis->aCts[i].BmDma.u8Status = (pThis->aCts[i].aIfs[0].pDrvBase != NULL ? BM_STATUS_D0DMA : 0) | (pThis->aCts[i].aIfs[1].pDrvBase != NULL ? BM_STATUS_D1DMA : 0); pThis->aCts[i].BmDma.pvAddr = 0; pThis->aCts[i].fReset = true; pThis->aCts[i].fRedo = false; pThis->aCts[i].fRedoIdle = false; ataAsyncIOClearRequests(&pThis->aCts[i]); Log2(("%s: Ctl#%d: message to async I/O thread, reset controller\n", __FUNCTION__, i)); ataAsyncIOPutRequest(&pThis->aCts[i], &g_ataResetARequest); ataAsyncIOPutRequest(&pThis->aCts[i], &g_ataResetCRequest); PDMCritSectLeave(&pThis->aCts[i].lock); } int rcRet = VINF_SUCCESS; if (!fConstruct) { /* * Setup asynchronous notification completion if the requests haven't * completed yet. */ if (!ataR3IsAsyncResetDone(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, ataR3IsAsyncResetDone); } else { /* * Wait for the requests for complete. * * Would be real nice if we could do it all from EMT(0) and not * involve the worker threads, then we could dispense with all the * waiting and semaphore ping-pong here... */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThis->aCts[i].AsyncIOThread != NIL_RTTHREAD) { int rc = RTSemMutexRequest(pThis->aCts[i].AsyncIORequestMutex, RT_INDEFINITE_WAIT); AssertRC(rc); ASMAtomicWriteBool(&pThis->aCts[i].fSignalIdle, true); rc = RTThreadUserReset(pThis->aCts[i].AsyncIOThread); AssertRC(rc); rc = RTSemMutexRelease(pThis->aCts[i].AsyncIORequestMutex); AssertRC(rc); if (!ataAsyncIOIsIdle(&pThis->aCts[i], false /*fStrict*/)) { rc = RTThreadUserWait(pThis->aCts[i].AsyncIOThread, 30*1000 /*ms*/); if (RT_FAILURE(rc)) rc = RTThreadUserWait(pThis->aCts[i].AsyncIOThread, 1000 /*ms*/); if (RT_FAILURE(rc)) { AssertRC(rc); rcRet = rc; } } } ASMAtomicWriteBool(&pThis->aCts[i].fSignalIdle, false); } if (RT_SUCCESS(rcRet)) { rcRet = ataR3IsAsyncResetDone(pDevIns) ? VINF_SUCCESS : VERR_INTERNAL_ERROR; AssertRC(rcRet); } } return rcRet; } /** * Reset notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ataR3Reset(PPDMDEVINS pDevIns) { ataR3ResetCommon(pDevIns, false /*fConstruct*/); } /** * @copydoc FNPDMDEVRELOCATE */ static DECLCALLBACK(void) ataR3Relocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { pThis->aCts[i].pDevInsRC += offDelta; pThis->aCts[i].aIfs[0].pDevInsRC += offDelta; pThis->aCts[i].aIfs[0].pControllerRC += offDelta; ataRelocBuffer(pDevIns, &pThis->aCts[i].aIfs[0]); pThis->aCts[i].aIfs[1].pDevInsRC += offDelta; pThis->aCts[i].aIfs[1].pControllerRC += offDelta; ataRelocBuffer(pDevIns, &pThis->aCts[i].aIfs[1]); } } /** * Destroy a driver instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @param pDevIns The device instance data. */ static DECLCALLBACK(int) ataR3Destruct(PPDMDEVINS pDevIns) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); int rc; Log(("ataR3Destruct\n")); PDMDEV_CHECK_VERSIONS_RETURN_QUIET(pDevIns); /* * Tell the async I/O threads to terminate. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThis->aCts[i].AsyncIOThread != NIL_RTTHREAD) { ASMAtomicWriteU32(&pThis->aCts[i].fShutdown, true); rc = RTSemEventSignal(pThis->aCts[i].AsyncIOSem); AssertRC(rc); rc = RTSemEventSignal(pThis->aCts[i].SuspendIOSem); AssertRC(rc); } } /* * Wait for the threads to terminate before destroying their resources. */ for (unsigned i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThis->aCts[i].AsyncIOThread != NIL_RTTHREAD) { rc = RTThreadWait(pThis->aCts[i].AsyncIOThread, 30000 /* 30 s*/, NULL); if (RT_SUCCESS(rc)) pThis->aCts[i].AsyncIOThread = NIL_RTTHREAD; else LogRel(("PIIX3 ATA Dtor: Ctl#%u is still executing, DevSel=%d AIOIf=%d CmdIf0=%#04x CmdIf1=%#04x rc=%Rrc\n", i, pThis->aCts[i].iSelectedIf, pThis->aCts[i].iAIOIf, pThis->aCts[i].aIfs[0].uATARegCommand, pThis->aCts[i].aIfs[1].uATARegCommand, rc)); } } /* * Free resources. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThis->aCts[i].AsyncIORequestMutex != NIL_RTSEMMUTEX) { RTSemMutexDestroy(pThis->aCts[i].AsyncIORequestMutex); pThis->aCts[i].AsyncIORequestMutex = NIL_RTSEMMUTEX; } if (pThis->aCts[i].AsyncIOSem != NIL_RTSEMEVENT) { RTSemEventDestroy(pThis->aCts[i].AsyncIOSem); pThis->aCts[i].AsyncIOSem = NIL_RTSEMEVENT; } if (pThis->aCts[i].SuspendIOSem != NIL_RTSEMEVENT) { RTSemEventDestroy(pThis->aCts[i].SuspendIOSem); pThis->aCts[i].SuspendIOSem = NIL_RTSEMEVENT; } /* try one final time */ if (pThis->aCts[i].AsyncIOThread != NIL_RTTHREAD) { rc = RTThreadWait(pThis->aCts[i].AsyncIOThread, 1 /*ms*/, NULL); if (RT_SUCCESS(rc)) { pThis->aCts[i].AsyncIOThread = NIL_RTTHREAD; LogRel(("PIIX3 ATA Dtor: Ctl#%u actually completed.\n", i)); } } for (uint32_t iIf = 0; iIf < RT_ELEMENTS(pThis->aCts[i].aIfs); iIf++) { if (pThis->aCts[i].aIfs[iIf].pTrackList) { ATAPIPassthroughTrackListDestroy(pThis->aCts[i].aIfs[iIf].pTrackList); pThis->aCts[i].aIfs[iIf].pTrackList = NULL; } } } return VINF_SUCCESS; } /** * Convert config value to DEVPCBIOSBOOT. * * @returns VBox status code. * @param pDevIns The device instance data. * @param pCfg Configuration handle. * @param penmChipset Where to store the chipset type. */ static int ataControllerFromCfg(PPDMDEVINS pDevIns, PCFGMNODE pCfg, CHIPSET *penmChipset) { char szType[20]; int rc = CFGMR3QueryStringDef(pCfg, "Type", &szType[0], sizeof(szType), "PIIX4"); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("Configuration error: Querying \"Type\" as a string failed")); if (!strcmp(szType, "PIIX3")) *penmChipset = CHIPSET_PIIX3; else if (!strcmp(szType, "PIIX4")) *penmChipset = CHIPSET_PIIX4; else if (!strcmp(szType, "ICH6")) *penmChipset = CHIPSET_ICH6; else { PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("Configuration error: The \"Type\" value \"%s\" is unknown"), szType); rc = VERR_INTERNAL_ERROR; } return rc; } /** * @interface_method_impl{PDMDEVREG,pfnConstruct} */ static DECLCALLBACK(int) ataR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { PCIATAState *pThis = PDMINS_2_DATA(pDevIns, PCIATAState *); PPDMIBASE pBase; int rc; bool fGCEnabled; bool fR0Enabled; uint32_t DelayIRQMillies; Assert(iInstance == 0); PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); /* * Initialize NIL handle values (for the destructor). */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { pThis->aCts[i].AsyncIOSem = NIL_RTSEMEVENT; pThis->aCts[i].SuspendIOSem = NIL_RTSEMEVENT; pThis->aCts[i].AsyncIORequestMutex = NIL_RTSEMMUTEX; pThis->aCts[i].AsyncIOThread = NIL_RTTHREAD; } /* * Validate and read configuration. */ if (!CFGMR3AreValuesValid(pCfg, "GCEnabled\0" "R0Enabled\0" "IRQDelay\0" "Type\0") /** @todo || invalid keys */) return PDMDEV_SET_ERROR(pDevIns, VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES, N_("PIIX3 configuration error: unknown option specified")); rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &fGCEnabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read GCEnabled as boolean")); Log(("%s: fGCEnabled=%d\n", __FUNCTION__, fGCEnabled)); rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &fR0Enabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read R0Enabled as boolean")); Log(("%s: fR0Enabled=%d\n", __FUNCTION__, fR0Enabled)); rc = CFGMR3QueryU32Def(pCfg, "IRQDelay", &DelayIRQMillies, 0); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read IRQDelay as integer")); Log(("%s: DelayIRQMillies=%d\n", __FUNCTION__, DelayIRQMillies)); Assert(DelayIRQMillies < 50); CHIPSET enmChipset = CHIPSET_PIIX3; rc = ataControllerFromCfg(pDevIns, pCfg, &enmChipset); if (RT_FAILURE(rc)) return rc; pThis->u8Type = (uint8_t)enmChipset; /* * Initialize data (most of it anyway). */ /* Status LUN. */ pThis->IBase.pfnQueryInterface = ataStatus_QueryInterface; pThis->ILeds.pfnQueryStatusLed = ataStatus_QueryStatusLed; /* PCI configuration space. */ PCIDevSetVendorId(&pThis->dev, 0x8086); /* Intel */ /* * When adding more IDE chipsets, don't forget to update pci_bios_init_device() * as it explicitly checks for PCI id for IDE controllers. */ switch (pThis->u8Type) { case CHIPSET_ICH6: PCIDevSetDeviceId(&pThis->dev, 0x269e); /* ICH6 IDE */ /** @todo: do we need it? Do we need anything else? */ pThis->dev.config[0x48] = 0x00; /* UDMACTL */ pThis->dev.config[0x4A] = 0x00; /* UDMATIM */ pThis->dev.config[0x4B] = 0x00; { /* * See www.intel.com/Assets/PDF/manual/298600.pdf p. 30 * Report * WR_Ping-Pong_EN: must be set * PCR0, PCR1: 80-pin primary cable reporting for both disks * SCR0, SCR1: 80-pin secondary cable reporting for both disks */ uint16_t u16Config = (1<<10) | (1<<7) | (1<<6) | (1<<5) | (1<<4) ; pThis->dev.config[0x54] = u16Config & 0xff; pThis->dev.config[0x55] = u16Config >> 8; } break; case CHIPSET_PIIX4: PCIDevSetDeviceId(&pThis->dev, 0x7111); /* PIIX4 IDE */ PCIDevSetRevisionId(&pThis->dev, 0x01); /* PIIX4E */ pThis->dev.config[0x48] = 0x00; /* UDMACTL */ pThis->dev.config[0x4A] = 0x00; /* UDMATIM */ pThis->dev.config[0x4B] = 0x00; break; case CHIPSET_PIIX3: PCIDevSetDeviceId(&pThis->dev, 0x7010); /* PIIX3 IDE */ break; default: AssertMsgFailed(("Unsupported IDE chipset type: %d\n", pThis->u8Type)); } PCIDevSetCommand( &pThis->dev, PCI_COMMAND_IOACCESS | PCI_COMMAND_MEMACCESS | PCI_COMMAND_BUSMASTER); PCIDevSetClassProg( &pThis->dev, 0x8a); /* programming interface = PCI_IDE bus master is supported */ PCIDevSetClassSub( &pThis->dev, 0x01); /* class_sub = PCI_IDE */ PCIDevSetClassBase( &pThis->dev, 0x01); /* class_base = PCI_mass_storage */ PCIDevSetHeaderType(&pThis->dev, 0x00); pThis->pDevIns = pDevIns; pThis->fGCEnabled = fGCEnabled; pThis->fR0Enabled = fR0Enabled; for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { pThis->aCts[i].pDevInsR3 = pDevIns; pThis->aCts[i].pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pThis->aCts[i].pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pThis->aCts[i].DelayIRQMillies = (uint32_t)DelayIRQMillies; for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { ATADevState *pIf = &pThis->aCts[i].aIfs[j]; pIf->iLUN = i * RT_ELEMENTS(pThis->aCts) + j; pIf->pDevInsR3 = pDevIns; pIf->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pIf->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pIf->pControllerR3 = &pThis->aCts[i]; pIf->pControllerR0 = MMHyperR3ToR0(PDMDevHlpGetVM(pDevIns), &pThis->aCts[i]); pIf->pControllerRC = MMHyperR3ToRC(PDMDevHlpGetVM(pDevIns), &pThis->aCts[i]); pIf->IBase.pfnQueryInterface = ataQueryInterface; pIf->IMountNotify.pfnMountNotify = ataMountNotify; pIf->IMountNotify.pfnUnmountNotify = ataUnmountNotify; pIf->IPort.pfnQueryDeviceLocation = ataR3QueryDeviceLocation; pIf->Led.u32Magic = PDMLED_MAGIC; } } Assert(RT_ELEMENTS(pThis->aCts) == 2); pThis->aCts[0].irq = 14; pThis->aCts[0].IOPortBase1 = 0x1f0; pThis->aCts[0].IOPortBase2 = 0x3f6; pThis->aCts[1].irq = 15; pThis->aCts[1].IOPortBase1 = 0x170; pThis->aCts[1].IOPortBase2 = 0x376; /* * Set the default critical section to NOP as we lock on controller level. */ rc = PDMDevHlpSetDeviceCritSect(pDevIns, PDMDevHlpCritSectGetNop(pDevIns)); AssertRCReturn(rc, rc); /* * Register the PCI device. * N.B. There's a hack in the PIIX3 PCI bridge device to assign this * device the slot next to itself. */ rc = PDMDevHlpPCIRegister(pDevIns, &pThis->dev); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register PCI device")); //AssertMsg(pThis->dev.devfn == 9 || iInstance != 0, ("pThis->dev.devfn=%d\n", pThis->dev.devfn)); rc = PDMDevHlpPCIIORegionRegister(pDevIns, 4, 0x10, PCI_ADDRESS_SPACE_IO, ataBMDMAIORangeMap); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register PCI I/O region for BMDMA")); /* * Register the I/O ports. * The ports are all hardcoded and enforced by the PIIX3 host bridge controller. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { rc = PDMDevHlpIOPortRegister(pDevIns, pThis->aCts[i].IOPortBase1, 8, (RTHCPTR)(uintptr_t)i, ataIOPortWrite1, ataIOPortRead1, ataIOPortWriteStr1, ataIOPortReadStr1, "ATA I/O Base 1"); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register I/O handlers")); if (fGCEnabled) { rc = PDMDevHlpIOPortRegisterRC(pDevIns, pThis->aCts[i].IOPortBase1, 8, (RTGCPTR)i, "ataIOPortWrite1", "ataIOPortRead1", "ataIOPortWriteStr1", "ataIOPortReadStr1", "ATA I/O Base 1"); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register I/O handlers (GC)")); } if (fR0Enabled) { #if 1 rc = PDMDevHlpIOPortRegisterR0(pDevIns, pThis->aCts[i].IOPortBase1, 8, (RTR0PTR)i, "ataIOPortWrite1", "ataIOPortRead1", NULL, NULL, "ATA I/O Base 1"); #else rc = PDMDevHlpIOPortRegisterR0(pDevIns, pThis->aCts[i].IOPortBase1, 8, (RTR0PTR)i, "ataIOPortWrite1", "ataIOPortRead1", "ataIOPortWriteStr1", "ataIOPortReadStr1", "ATA I/O Base 1"); #endif if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, "PIIX3 cannot register I/O handlers (R0)."); } rc = PDMDevHlpIOPortRegister(pDevIns, pThis->aCts[i].IOPortBase2, 1, (RTHCPTR)(uintptr_t)i, ataIOPortWrite2, ataIOPortRead2, NULL, NULL, "ATA I/O Base 2"); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register base2 I/O handlers")); if (fGCEnabled) { rc = PDMDevHlpIOPortRegisterRC(pDevIns, pThis->aCts[i].IOPortBase2, 1, (RTGCPTR)i, "ataIOPortWrite2", "ataIOPortRead2", NULL, NULL, "ATA I/O Base 2"); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register base2 I/O handlers (GC)")); } if (fR0Enabled) { rc = PDMDevHlpIOPortRegisterR0(pDevIns, pThis->aCts[i].IOPortBase2, 1, (RTR0PTR)i, "ataIOPortWrite2", "ataIOPortRead2", NULL, NULL, "ATA I/O Base 2"); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register base2 I/O handlers (R0)")); } for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { ATADevState *pIf = &pThis->aCts[i].aIfs[j]; PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatATADMA, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of ATA DMA transfers.", "/Devices/IDE%d/ATA%d/Unit%d/DMA", iInstance, i, j); PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatATAPIO, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of ATA PIO transfers.", "/Devices/IDE%d/ATA%d/Unit%d/PIO", iInstance, i, j); PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatATAPIDMA, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of ATAPI DMA transfers.", "/Devices/IDE%d/ATA%d/Unit%d/AtapiDMA", iInstance, i, j); PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatATAPIPIO, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of ATAPI PIO transfers.", "/Devices/IDE%d/ATA%d/Unit%d/AtapiPIO", iInstance, i, j); #ifdef VBOX_WITH_STATISTICS /** @todo release too. */ PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatReads, STAMTYPE_PROFILE_ADV, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of the read operations.", "/Devices/IDE%d/ATA%d/Unit%d/Reads", iInstance, i, j); #endif PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatBytesRead, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Amount of data read.", "/Devices/IDE%d/ATA%d/Unit%d/ReadBytes", iInstance, i, j); #ifdef VBOX_INSTRUMENT_DMA_WRITES PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatInstrVDWrites,STAMTYPE_PROFILE_ADV, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of the VD DMA write operations.", "/Devices/IDE%d/ATA%d/Unit%d/InstrVDWrites", iInstance, i, j); #endif #ifdef VBOX_WITH_STATISTICS PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatWrites, STAMTYPE_PROFILE_ADV, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of the write operations.", "/Devices/IDE%d/ATA%d/Unit%d/Writes", iInstance, i, j); #endif PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatBytesWritten, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Amount of data written.", "/Devices/IDE%d/ATA%d/Unit%d/WrittenBytes", iInstance, i, j); #ifdef VBOX_WITH_STATISTICS PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatFlushes, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of the flush operations.", "/Devices/IDE%d/ATA%d/Unit%d/Flushes", iInstance, i, j); #endif } #ifdef VBOX_WITH_STATISTICS /** @todo release too. */ PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncOps, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "The number of async operations.", "/Devices/IDE%d/ATA%d/Async/Operations", iInstance, i); /** @todo STAMUNIT_MICROSECS */ PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncMinWait, STAMTYPE_U64_RESET, STAMVISIBILITY_ALWAYS, STAMUNIT_NONE, "Minimum wait in microseconds.", "/Devices/IDE%d/ATA%d/Async/MinWait", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncMaxWait, STAMTYPE_U64_RESET, STAMVISIBILITY_ALWAYS, STAMUNIT_NONE, "Maximum wait in microseconds.", "/Devices/IDE%d/ATA%d/Async/MaxWait", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncTimeUS, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_NONE, "Total time spent in microseconds.", "/Devices/IDE%d/ATA%d/Async/TotalTimeUS", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncTime, STAMTYPE_PROFILE_ADV, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of async operations.", "/Devices/IDE%d/ATA%d/Async/Time", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatLockWait, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of locks.", "/Devices/IDE%d/ATA%d/Async/LockWait", iInstance, i); #endif /* VBOX_WITH_STATISTICS */ /* Initialize per-controller critical section */ rc = PDMDevHlpCritSectInit(pDevIns, &pThis->aCts[i].lock, RT_SRC_POS, "ATA#%u", i); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot initialize critical section")); } /* * Attach status driver (optional). */ rc = PDMDevHlpDriverAttach(pDevIns, PDM_STATUS_LUN, &pThis->IBase, &pBase, "Status Port"); if (RT_SUCCESS(rc)) { pThis->pLedsConnector = PDMIBASE_QUERY_INTERFACE(pBase, PDMILEDCONNECTORS); pThis->pMediaNotify = PDMIBASE_QUERY_INTERFACE(pBase, PDMIMEDIANOTIFY); } else if (rc != VERR_PDM_NO_ATTACHED_DRIVER) { AssertMsgFailed(("Failed to attach to status driver. rc=%Rrc\n", rc)); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot attach to status driver")); } /* * Attach the units. */ uint32_t cbTotalBuffer = 0; for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { PATACONTROLLER pCtl = &pThis->aCts[i]; /* * Start the worker thread. */ pCtl->uAsyncIOState = ATA_AIO_NEW; rc = RTSemEventCreate(&pCtl->AsyncIOSem); AssertLogRelRCReturn(rc, rc); rc = RTSemEventCreate(&pCtl->SuspendIOSem); AssertLogRelRCReturn(rc, rc); rc = RTSemMutexCreate(&pCtl->AsyncIORequestMutex); AssertLogRelRCReturn(rc, rc); ataAsyncIOClearRequests(pCtl); rc = RTThreadCreateF(&pCtl->AsyncIOThread, ataAsyncIOLoop, (void *)pCtl, 128*1024 /*cbStack*/, RTTHREADTYPE_IO, RTTHREADFLAGS_WAITABLE, "ATA-%u", i); AssertLogRelRCReturn(rc, rc); Assert(pCtl->AsyncIOThread != NIL_RTTHREAD && pCtl->AsyncIOSem != NIL_RTSEMEVENT && pCtl->SuspendIOSem != NIL_RTSEMEVENT && pCtl->AsyncIORequestMutex != NIL_RTSEMMUTEX); Log(("%s: controller %d AIO thread id %#x; sem %p susp_sem %p mutex %p\n", __FUNCTION__, i, pCtl->AsyncIOThread, pCtl->AsyncIOSem, pCtl->SuspendIOSem, pCtl->AsyncIORequestMutex)); for (uint32_t j = 0; j < RT_ELEMENTS(pCtl->aIfs); j++) { static const char *s_apszDescs[RT_ELEMENTS(pThis->aCts)][RT_ELEMENTS(pCtl->aIfs)] = { { "Primary Master", "Primary Slave" }, { "Secondary Master", "Secondary Slave" } }; /* * Try attach the block device and get the interfaces, * required as well as optional. */ ATADevState *pIf = &pCtl->aIfs[j]; rc = PDMDevHlpDriverAttach(pDevIns, pIf->iLUN, &pIf->IBase, &pIf->pDrvBase, s_apszDescs[i][j]); if (RT_SUCCESS(rc)) { rc = ataConfigLun(pDevIns, pIf); if (RT_SUCCESS(rc)) { /* * Init vendor product data. */ static const char *s_apszCFGMKeys[RT_ELEMENTS(pThis->aCts)][RT_ELEMENTS(pCtl->aIfs)] = { { "PrimaryMaster", "PrimarySlave" }, { "SecondaryMaster", "SecondarySlave" } }; /* Generate a default serial number. */ char szSerial[ATA_SERIAL_NUMBER_LENGTH+1]; RTUUID Uuid; if (pIf->pDrvBlock) rc = pIf->pDrvBlock->pfnGetUuid(pIf->pDrvBlock, &Uuid); else RTUuidClear(&Uuid); if (RT_FAILURE(rc) || RTUuidIsNull(&Uuid)) { /* Generate a predictable serial for drives which don't have a UUID. */ RTStrPrintf(szSerial, sizeof(szSerial), "VB%x-%04x%04x", pIf->iLUN + pDevIns->iInstance * 32, pThis->aCts[i].IOPortBase1, pThis->aCts[i].IOPortBase2); } else RTStrPrintf(szSerial, sizeof(szSerial), "VB%08x-%08x", Uuid.au32[0], Uuid.au32[3]); /* Get user config if present using defaults otherwise. */ PCFGMNODE pCfgNode = CFGMR3GetChild(pCfg, s_apszCFGMKeys[i][j]); rc = CFGMR3QueryStringDef(pCfgNode, "SerialNumber", pIf->szSerialNumber, sizeof(pIf->szSerialNumber), szSerial); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"SerialNumber\" is longer than 20 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"SerialNumber\" as string")); } rc = CFGMR3QueryStringDef(pCfgNode, "FirmwareRevision", pIf->szFirmwareRevision, sizeof(pIf->szFirmwareRevision), "1.0"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"FirmwareRevision\" is longer than 8 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"FirmwareRevision\" as string")); } rc = CFGMR3QueryStringDef(pCfgNode, "ModelNumber", pIf->szModelNumber, sizeof(pIf->szModelNumber), pIf->fATAPI ? "VBOX CD-ROM" : "VBOX HARDDISK"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ModelNumber\" is longer than 40 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ModelNumber\" as string")); } rc = CFGMR3QueryBoolDef(pCfgNode, "NonRotationalMedium", &pIf->fNonRotational, false); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"NonRotationalMedium\" as boolean")); /* There are three other identification strings for CD drives used for INQUIRY */ if (pIf->fATAPI) { rc = CFGMR3QueryStringDef(pCfgNode, "ATAPIVendorId", pIf->szInquiryVendorId, sizeof(pIf->szInquiryVendorId), "VBOX"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ATAPIVendorId\" is longer than 16 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ATAPIVendorId\" as string")); } rc = CFGMR3QueryStringDef(pCfgNode, "ATAPIProductId", pIf->szInquiryProductId, sizeof(pIf->szInquiryProductId), "CD-ROM"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ATAPIProductId\" is longer than 16 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ATAPIProductId\" as string")); } rc = CFGMR3QueryStringDef(pCfgNode, "ATAPIRevision", pIf->szInquiryRevision, sizeof(pIf->szInquiryRevision), "1.0"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ATAPIRevision\" is longer than 4 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ATAPIRevision\" as string")); } rc = CFGMR3QueryBoolDef(pCfgNode, "OverwriteInquiry", &pIf->fOverwriteInquiry, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"OverwriteInquiry\" as boolean")); } } } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { pIf->pDrvBase = NULL; pIf->pDrvBlock = NULL; pIf->cbIOBuffer = 0; pIf->pbIOBufferR3 = NULL; pIf->pbIOBufferR0 = NIL_RTR0PTR; pIf->pbIOBufferRC = NIL_RTGCPTR; LogRel(("PIIX3 ATA: LUN#%d: no unit\n", pIf->iLUN)); } else { switch (rc) { case VERR_ACCESS_DENIED: /* Error already cached by DrvHostBase */ return rc; default: return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("PIIX3 cannot attach drive to the %s"), s_apszDescs[i][j]); } } cbTotalBuffer += pIf->cbIOBuffer; } } rc = PDMDevHlpSSMRegisterEx(pDevIns, ATA_SAVED_STATE_VERSION, sizeof(*pThis) + cbTotalBuffer, NULL, NULL, ataLiveExec, NULL, ataSaveLoadPrep, ataSaveExec, NULL, ataSaveLoadPrep, ataLoadExec, NULL); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register save state handlers")); /* * Initialize the device state. */ return ataR3ResetCommon(pDevIns, true /*fConstruct*/); } /** * The device registration structure. */ const PDMDEVREG g_DevicePIIX3IDE = { /* u32Version */ PDM_DEVREG_VERSION, /* szName */ "piix3ide", /* szRCMod */ "VBoxDDGC.gc", /* szR0Mod */ "VBoxDDR0.r0", /* pszDescription */ "Intel PIIX3 ATA controller.\n" " LUN #0 is primary master.\n" " LUN #1 is primary slave.\n" " LUN #2 is secondary master.\n" " LUN #3 is secondary slave.\n" " LUN #999 is the LED/Status connector.", /* fFlags */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0 | PDM_DEVREG_FLAGS_FIRST_SUSPEND_NOTIFICATION | PDM_DEVREG_FLAGS_FIRST_POWEROFF_NOTIFICATION | PDM_DEVREG_FLAGS_FIRST_RESET_NOTIFICATION, /* fClass */ PDM_DEVREG_CLASS_STORAGE, /* cMaxInstances */ 1, /* cbInstance */ sizeof(PCIATAState), /* pfnConstruct */ ataR3Construct, /* pfnDestruct */ ataR3Destruct, /* pfnRelocate */ ataR3Relocate, /* pfnIOCtl */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ ataR3Reset, /* pfnSuspend */ ataR3Suspend, /* pfnResume */ ataR3Resume, /* pfnAttach */ ataR3Attach, /* pfnDetach */ ataR3Detach, /* pfnQueryInterface. */ NULL, /* pfnInitComplete */ NULL, /* pfnPowerOff */ ataR3PowerOff, /* pfnSoftReset */ NULL, /* u32VersionEnd */ PDM_DEVREG_VERSION }; #endif /* IN_RING3 */ #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */