/* $Id: DevBusLogic.cpp 89266 2021-05-25 11:10:45Z vboxsync $ */ /** @file * VBox storage devices - BusLogic SCSI host adapter BT-958. * * Based on the Multi-Master Ultra SCSI Systems Technical Reference Manual. */ /* * Copyright (C) 2006-2020 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_BUSLOGIC #include #include #include #include #include #include #include #include #include #ifdef IN_RING3 # include # include # include # include #endif #include "VBoxSCSI.h" #include "VBoxDD.h" /********************************************************************************************************************************* * Defined Constants And Macros * *********************************************************************************************************************************/ /** Maximum number of attached devices the adapter can handle. */ #define BUSLOGIC_MAX_DEVICES 16 /** Maximum number of scatter gather elements this device can handle. */ #define BUSLOGIC_MAX_SCATTER_GATHER_LIST_SIZE 128 /** Size of the command buffer. */ #define BUSLOGIC_COMMAND_SIZE_MAX 53 /** Size of the reply buffer. */ #define BUSLOGIC_REPLY_SIZE_MAX 64 /** Custom fixed I/O ports for BIOS controller access. * Note that these should not be in the ISA range (below 400h) to avoid * conflicts with ISA device probing. Addresses in the 300h-340h range should be * especially avoided. */ #define BUSLOGIC_BIOS_IO_PORT 0x430 /** State saved version. */ #define BUSLOGIC_SAVED_STATE_MINOR_VERSION 5 /** Saved state version before VBoxSCSI got removed. */ #define BUSLOGIC_SAVED_STATE_MINOR_PRE_VBOXSCSI_REMOVAL 4 /** Saved state version before command buffer size was raised. */ #define BUSLOGIC_SAVED_STATE_MINOR_PRE_CMDBUF_RESIZE 3 /** Saved state version before 24-bit mailbox support was implemented. */ #define BUSLOGIC_SAVED_STATE_MINOR_PRE_24BIT_MBOX 2 /** Saved state version before the suspend on error feature was implemented. */ #define BUSLOGIC_SAVED_STATE_MINOR_PRE_ERROR_HANDLING 1 /** Command buffer size in old saved states. */ #define BUSLOGIC_COMMAND_SIZE_OLD 5 /** The duration of software-initiated reset (in nano seconds). * Not documented, set to 50 ms. */ #define BUSLOGIC_RESET_DURATION_NS UINT64_C(50000000) /********************************************************************************************************************************* * Structures and Typedefs * *********************************************************************************************************************************/ /** * State of a device attached to the buslogic host adapter. * * @implements PDMIBASE * @implements PDMISCSIPORT * @implements PDMILEDPORTS */ typedef struct BUSLOGICDEVICE { /** The ring-3 device instance (for getting our bearings when arriving in an * interface method). */ PPDMDEVINSR3 pDevIns; /** LUN of the device. */ uint32_t iLUN; /** Flag whether device is present. * @note This is mirrored in BUSLOGIC::afDevicePresent. */ bool fPresent; bool afAlignment[3]; /** Our base interface. */ PDMIBASE IBase; /** Media port interface. */ PDMIMEDIAPORT IMediaPort; /** Extended media port interface. */ PDMIMEDIAEXPORT IMediaExPort; /** Led interface. */ PDMILEDPORTS ILed; /** Pointer to the attached driver's base interface. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** Pointer to the attached driver's media interface. */ R3PTRTYPE(PPDMIMEDIA) pDrvMedia; /** Pointer to the attached driver's extended media interface. */ R3PTRTYPE(PPDMIMEDIAEX) pDrvMediaEx; /** The status LED state for this device. */ PDMLED Led; /** Number of outstanding tasks on the port. */ volatile uint32_t cOutstandingRequests; /** The device name. */ char szName[12]; } BUSLOGICDEVICE, *PBUSLOGICDEVICE; /** * Commands the BusLogic adapter supports. */ enum BUSLOGICCOMMAND { BUSLOGICCOMMAND_TEST_CMDC_INTERRUPT = 0x00, BUSLOGICCOMMAND_INITIALIZE_MAILBOX = 0x01, BUSLOGICCOMMAND_EXECUTE_MAILBOX_COMMAND = 0x02, BUSLOGICCOMMAND_EXECUTE_BIOS_COMMAND = 0x03, BUSLOGICCOMMAND_INQUIRE_BOARD_ID = 0x04, BUSLOGICCOMMAND_ENABLE_OUTGOING_MAILBOX_AVAILABLE_INTERRUPT = 0x05, BUSLOGICCOMMAND_SET_SCSI_SELECTION_TIMEOUT = 0x06, BUSLOGICCOMMAND_SET_PREEMPT_TIME_ON_BUS = 0x07, BUSLOGICCOMMAND_SET_TIME_OFF_BUS = 0x08, BUSLOGICCOMMAND_SET_BUS_TRANSFER_RATE = 0x09, BUSLOGICCOMMAND_INQUIRE_INSTALLED_DEVICES_ID_0_TO_7 = 0x0a, BUSLOGICCOMMAND_INQUIRE_CONFIGURATION = 0x0b, BUSLOGICCOMMAND_ENABLE_TARGET_MODE = 0x0c, BUSLOGICCOMMAND_INQUIRE_SETUP_INFORMATION = 0x0d, BUSLOGICCOMMAND_WRITE_ADAPTER_LOCAL_RAM = 0x1a, BUSLOGICCOMMAND_READ_ADAPTER_LOCAL_RAM = 0x1b, BUSLOGICCOMMAND_WRITE_BUSMASTER_CHIP_FIFO = 0x1c, BUSLOGICCOMMAND_READ_BUSMASTER_CHIP_FIFO = 0x1d, BUSLOGICCOMMAND_ECHO_COMMAND_DATA = 0x1f, BUSLOGICCOMMAND_HOST_ADAPTER_DIAGNOSTIC = 0x20, BUSLOGICCOMMAND_SET_ADAPTER_OPTIONS = 0x21, BUSLOGICCOMMAND_INQUIRE_INSTALLED_DEVICES_ID_8_TO_15 = 0x23, BUSLOGICCOMMAND_INQUIRE_TARGET_DEVICES = 0x24, BUSLOGICCOMMAND_DISABLE_HOST_ADAPTER_INTERRUPT = 0x25, BUSLOGICCOMMAND_EXT_BIOS_INFO = 0x28, BUSLOGICCOMMAND_UNLOCK_MAILBOX = 0x29, BUSLOGICCOMMAND_INITIALIZE_EXTENDED_MAILBOX = 0x81, BUSLOGICCOMMAND_EXECUTE_SCSI_COMMAND = 0x83, BUSLOGICCOMMAND_INQUIRE_FIRMWARE_VERSION_3RD_LETTER = 0x84, BUSLOGICCOMMAND_INQUIRE_FIRMWARE_VERSION_LETTER = 0x85, BUSLOGICCOMMAND_INQUIRE_PCI_HOST_ADAPTER_INFORMATION = 0x86, BUSLOGICCOMMAND_INQUIRE_HOST_ADAPTER_MODEL_NUMBER = 0x8b, BUSLOGICCOMMAND_INQUIRE_SYNCHRONOUS_PERIOD = 0x8c, BUSLOGICCOMMAND_INQUIRE_EXTENDED_SETUP_INFORMATION = 0x8d, BUSLOGICCOMMAND_ENABLE_STRICT_ROUND_ROBIN_MODE = 0x8f, BUSLOGICCOMMAND_STORE_HOST_ADAPTER_LOCAL_RAM = 0x90, BUSLOGICCOMMAND_FETCH_HOST_ADAPTER_LOCAL_RAM = 0x91, BUSLOGICCOMMAND_STORE_LOCAL_DATA_IN_EEPROM = 0x92, BUSLOGICCOMMAND_UPLOAD_AUTO_SCSI_CODE = 0x94, BUSLOGICCOMMAND_MODIFY_IO_ADDRESS = 0x95, BUSLOGICCOMMAND_SET_CCB_FORMAT = 0x96, BUSLOGICCOMMAND_WRITE_INQUIRY_BUFFER = 0x9a, BUSLOGICCOMMAND_READ_INQUIRY_BUFFER = 0x9b, BUSLOGICCOMMAND_FLASH_ROM_UPLOAD_DOWNLOAD = 0xa7, BUSLOGICCOMMAND_READ_SCAM_DATA = 0xa8, BUSLOGICCOMMAND_WRITE_SCAM_DATA = 0xa9 } BUSLOGICCOMMAND; #pragma pack(1) /** * Auto SCSI structure which is located * in host adapter RAM and contains several * configuration parameters. */ typedef struct AutoSCSIRam { uint8_t aInternalSignature[2]; uint8_t cbInformation; uint8_t aHostAdaptertype[6]; uint8_t uReserved1; bool fFloppyEnabled : 1; bool fFloppySecondary : 1; bool fLevelSensitiveInterrupt : 1; unsigned char uReserved2 : 2; unsigned char uSystemRAMAreForBIOS : 3; unsigned char uDMAChannel : 7; bool fDMAAutoConfiguration : 1; unsigned char uIrqChannel : 7; bool fIrqAutoConfiguration : 1; uint8_t uDMATransferRate; uint8_t uSCSIId; bool fLowByteTerminated : 1; bool fParityCheckingEnabled : 1; bool fHighByteTerminated : 1; bool fNoisyCablingEnvironment : 1; bool fFastSynchronousNeogtiation : 1; bool fBusResetEnabled : 1; bool fReserved3 : 1; bool fActiveNegotiationEnabled : 1; uint8_t uBusOnDelay; uint8_t uBusOffDelay; bool fHostAdapterBIOSEnabled : 1; bool fBIOSRedirectionOfInt19 : 1; bool fExtendedTranslation : 1; bool fMapRemovableAsFixed : 1; bool fReserved4 : 1; bool fBIOSSupportsMoreThan2Drives : 1; bool fBIOSInterruptMode : 1; bool fFlopticalSupport : 1; uint16_t u16DeviceEnabledMask; uint16_t u16WidePermittedMask; uint16_t u16FastPermittedMask; uint16_t u16SynchronousPermittedMask; uint16_t u16DisconnectPermittedMask; uint16_t u16SendStartUnitCommandMask; uint16_t u16IgnoreInBIOSScanMask; unsigned char uPCIInterruptPin : 2; unsigned char uHostAdapterIoPortAddress : 2; bool fStrictRoundRobinMode : 1; bool fVesaBusSpeedGreaterThan33MHz : 1; bool fVesaBurstWrite : 1; bool fVesaBurstRead : 1; uint16_t u16UltraPermittedMask; uint32_t uReserved5; uint8_t uReserved6; uint8_t uAutoSCSIMaximumLUN; bool fReserved7 : 1; bool fSCAMDominant : 1; bool fSCAMenabled : 1; bool fSCAMLevel2 : 1; unsigned char uReserved8 : 4; bool fInt13Extension : 1; bool fReserved9 : 1; bool fCDROMBoot : 1; unsigned char uReserved10 : 5; unsigned char uBootTargetId : 4; unsigned char uBootChannel : 4; bool fForceBusDeviceScanningOrder : 1; unsigned char uReserved11 : 7; uint16_t u16NonTaggedToAlternateLunPermittedMask; uint16_t u16RenegotiateSyncAfterCheckConditionMask; uint8_t aReserved12[10]; uint8_t aManufacturingDiagnostic[2]; uint16_t u16Checksum; } AutoSCSIRam, *PAutoSCSIRam; AssertCompileSize(AutoSCSIRam, 64); #pragma pack() /** * The local Ram. */ typedef union HostAdapterLocalRam { /** Byte view. */ uint8_t u8View[256]; /** Structured view. */ struct { /** Offset 0 - 63 is for BIOS. */ uint8_t u8Bios[64]; /** Auto SCSI structure. */ AutoSCSIRam autoSCSIData; } structured; } HostAdapterLocalRam, *PHostAdapterLocalRam; AssertCompileSize(HostAdapterLocalRam, 256); /** Ugly 24-bit big-endian addressing. */ typedef struct { uint8_t hi; uint8_t mid; uint8_t lo; } Addr24, Len24; AssertCompileSize(Addr24, 3); #define ADDR_TO_U32(x) (((x).hi << 16) | ((x).mid << 8) | (x).lo) #define LEN_TO_U32 ADDR_TO_U32 #define U32_TO_ADDR(a, x) do {(a).hi = (x) >> 16; (a).mid = (x) >> 8; (a).lo = (x);} while(0) #define U32_TO_LEN U32_TO_ADDR /** @name Compatible ISA base I/O port addresses. Disabled if zero. * @{ */ #define NUM_ISA_BASES 8 #define MAX_ISA_BASE (NUM_ISA_BASES - 1) #define ISA_BASE_DISABLED 6 #ifdef IN_RING3 static uint16_t const g_aISABases[NUM_ISA_BASES] = { 0x330, 0x334, 0x230, 0x234, 0x130, 0x134, 0, 0 }; #endif /** @} */ /** * Emulated device types. */ enum BL_DEVICE_TYPE { DEV_BT_958D = 0, /* BusLogic BT-958D, PCI. */ DEV_BT_545C = 1, /* BusLogic BT-545C, ISA. */ DEV_AHA_1540B = 2 /* Adaptec AHA-1540B, ISA. */ }; /** Pointer to a task state structure. */ typedef struct BUSLOGICREQ *PBUSLOGICREQ; /** * The shared BusLogic device emulation state. */ typedef struct BUSLOGIC { /** Status register - Readonly. */ volatile uint8_t regStatus; /** Interrupt register - Readonly. */ volatile uint8_t regInterrupt; /** Geometry register - Readonly. */ volatile uint8_t regGeometry; /** Pending (delayed) interrupt. */ volatile uint8_t uPendingIntr; /** Command code the guest issued. */ uint8_t uOperationCode; /** Current position in the command buffer. */ uint8_t iParameter; /** Parameters left until the command is complete. */ uint8_t cbCommandParametersLeft; /** Buffer for the command parameters the adapter is currently receiving from the guest. * Size of the largest command which is possible. */ uint8_t aCommandBuffer[BUSLOGIC_COMMAND_SIZE_MAX]; /* Size of the biggest request. */ /** Only for LOG_ENABLED builds! */ volatile uint32_t cInMailboxesReadyIfLogEnabled; /** Position in the buffer we are reading next. * @note aligned on 64 byte boundrary for cache-line mojo. Means IOISABase * is at offset 130. */ uint8_t iReply; /** Bytes left until the reply buffer is empty. */ uint8_t cbReplyParametersLeft; /** Buffer to store reply data from the controller to the guest. */ uint8_t aReplyBuffer[BUSLOGIC_REPLY_SIZE_MAX]; /* Size of the biggest reply. */ /** ISA I/O port base (disabled if zero). */ RTIOPORT IOISABase; /** Default ISA I/O port base in FW-compatible format. */ uint8_t uDefaultISABaseCode; /** Emulated device type. */ uint8_t uDevType; /** Signature index for Adaptec models. */ uint8_t uAhaSigIdx; /** Whether we are using the RAM or reply buffer. */ bool fUseLocalRam; /** Flag whether IRQs are enabled. */ bool fIRQEnabled; /** Flag whether 24-bit mailboxes are in use (default is 32-bit). */ bool fMbxIs24Bit; /** ISA I/O port base (encoded in FW-compatible format). */ uint8_t uISABaseCode; /** ISA IRQ, non-zero if in ISA mode. */ uint8_t uIsaIrq; /** Number of mailboxes the guest set up. */ uint32_t cMailbox; /** Time when HBA reset was last initiated. */ uint64_t u64ResetTime; /**< @todo does this need to be saved? */ /** Physical base address of the outgoing mailboxes. */ RTGCPHYS GCPhysAddrMailboxOutgoingBase; /** Current outgoing mailbox position. */ uint32_t uMailboxOutgoingPositionCurrent; /** Number of mailboxes ready. */ volatile uint32_t cMailboxesReady; /** Whether a notification to R3 was sent. */ volatile bool fNotificationSent; /** Flag whether a BIOS request is pending. */ volatile bool fBiosReqPending; /** Whether strict round robin is enabled. */ bool fStrictRoundRobinMode; /** Whether the extended LUN CCB format is enabled for 32 possible logical units. */ bool fExtendedLunCCBFormat; /** Last completed command, for debugging. */ uint8_t uPrevCmd; /** Current incoming mailbox position. */ uint32_t uMailboxIncomingPositionCurrent; /** Physical base address of the incoming mailboxes. */ RTGCPHYS GCPhysAddrMailboxIncomingBase; /** Critical section protecting access to the interrupt status register. */ PDMCRITSECT CritSectIntr; /** Device presence indicators. * @note Copy of BUSLOGICDEVICE::fPresent accessible from ring-0. */ bool afDevicePresent[BUSLOGIC_MAX_DEVICES]; /** The event semaphore the processing thread waits on. */ SUPSEMEVENT hEvtProcess; /** ISA compatibility I/O ports. */ IOMIOPORTHANDLE hIoPortsIsa; /** BIOS I/O ports for booting, optional. */ IOMIOPORTHANDLE hIoPortsBios; /** PCI Region \#0: I/O ports. */ IOMIOPORTHANDLE hIoPortsPci; /** PCI Region \#1: MMIO (32 bytes, but probably rounded up to 4KB). */ IOMMMIOHANDLE hMmio; /** Local RAM for the fetch hostadapter local RAM request. * I don't know how big the buffer really is but the maximum * seems to be 256 bytes because the offset and count field in the command request * are only one byte big. */ HostAdapterLocalRam LocalRam; } BUSLOGIC; /** Pointer to the shared BusLogic device emulation state. */ typedef BUSLOGIC *PBUSLOGIC; /** * The ring-3 BusLogic device emulation state. * * @implements PDMILEDPORTS */ typedef struct BUSLOGICR3 { /** The device instance - only for getting our bearings in interface methods. */ PPDMDEVINSR3 pDevIns; /** BusLogic device states. */ BUSLOGICDEVICE aDeviceStates[BUSLOGIC_MAX_DEVICES]; /** The base interface. * @todo use PDMDEVINS::IBase */ PDMIBASE IBase; /** Status Port - Leds interface. */ PDMILEDPORTS ILeds; /** Partner of ILeds. */ R3PTRTYPE(PPDMILEDCONNECTORS) pLedsConnector; /** Status LUN: Media Notifys. */ R3PTRTYPE(PPDMIMEDIANOTIFY) pMediaNotify; /** Indicates that PDMDevHlpAsyncNotificationCompleted should be called when * a port is entering the idle state. */ bool volatile fSignalIdle; /** Flag whether the worker thread is sleeping. */ volatile bool fWrkThreadSleeping; /** Worker thread. */ R3PTRTYPE(PPDMTHREAD) pThreadWrk; /** Pointer to the array of addresses to redo. */ R3PTRTYPE(PRTGCPHYS) paGCPhysAddrCCBRedo; /** Number of addresses the redo array holds. */ uint32_t cReqsRedo; } BUSLOGICR3; /** Pointer to the ring-3 BusLogic device emulation state. */ typedef BUSLOGICR3 *PBUSLOGICR3; /** * The ring-0 BusLogic device emulation state. */ typedef struct BUSLOGICR0 { uint64_t uUnused; } BUSLOGICR0; /** Pointer to the ring-0 BusLogic device emulation state. */ typedef BUSLOGICR0 *PBUSLOGICR0; /** * The raw-mode BusLogic device emulation state. */ typedef struct BUSLOGICRC { uint64_t uUnused; } BUSLOGICRC; /** Pointer to the raw-mode BusLogic device emulation state. */ typedef BUSLOGICRC *PBUSLOGICRC; /** The current context BusLogic device emulation state. */ typedef CTX_SUFF(BUSLOGIC) BUSLOGICCC; /** Pointer to the current context BusLogic device emulation state. */ typedef CTX_SUFF(PBUSLOGIC) PBUSLOGICCC; /** Register offsets in the I/O port space. */ #define BUSLOGIC_REGISTER_CONTROL 0 /**< Writeonly */ /** Fields for the control register. */ # define BL_CTRL_RSBUS RT_BIT(4) /* Reset SCSI Bus. */ # define BL_CTRL_RINT RT_BIT(5) /* Reset Interrupt. */ # define BL_CTRL_RSOFT RT_BIT(6) /* Soft Reset. */ # define BL_CTRL_RHARD RT_BIT(7) /* Hard Reset. */ #define BUSLOGIC_REGISTER_STATUS 0 /**< Readonly */ /** Fields for the status register. */ # define BL_STAT_CMDINV RT_BIT(0) /* Command Invalid. */ # define BL_STAT_DIRRDY RT_BIT(2) /* Data In Register Ready. */ # define BL_STAT_CPRBSY RT_BIT(3) /* Command/Parameter Out Register Busy. */ # define BL_STAT_HARDY RT_BIT(4) /* Host Adapter Ready. */ # define BL_STAT_INREQ RT_BIT(5) /* Initialization Required. */ # define BL_STAT_DFAIL RT_BIT(6) /* Diagnostic Failure. */ # define BL_STAT_DACT RT_BIT(7) /* Diagnistic Active. */ #define BUSLOGIC_REGISTER_COMMAND 1 /**< Writeonly */ #define BUSLOGIC_REGISTER_DATAIN 1 /**< Readonly */ #define BUSLOGIC_REGISTER_INTERRUPT 2 /**< Readonly */ /** Fields for the interrupt register. */ # define BL_INTR_IMBL RT_BIT(0) /* Incoming Mailbox Loaded. */ # define BL_INTR_OMBR RT_BIT(1) /* Outgoing Mailbox Available. */ # define BL_INTR_CMDC RT_BIT(2) /* Command Complete. */ # define BL_INTR_RSTS RT_BIT(3) /* SCSI Bus Reset State. */ # define BL_INTR_INTV RT_BIT(7) /* Interrupt Valid. */ #define BUSLOGIC_REGISTER_GEOMETRY 3 /* Readonly */ # define BL_GEOM_XLATEN RT_BIT(7) /* Extended geometry translation enabled. */ /** Structure for the INQUIRE_PCI_HOST_ADAPTER_INFORMATION reply. */ typedef struct ReplyInquirePCIHostAdapterInformation { uint8_t IsaIOPort; uint8_t IRQ; unsigned char LowByteTerminated : 1; unsigned char HighByteTerminated : 1; unsigned char uReserved : 2; /* Reserved. */ unsigned char JP1 : 1; /* Whatever that means. */ unsigned char JP2 : 1; /* Whatever that means. */ unsigned char JP3 : 1; /* Whatever that means. */ /** Whether the provided info is valid. */ unsigned char InformationIsValid: 1; uint8_t uReserved2; /* Reserved. */ } ReplyInquirePCIHostAdapterInformation, *PReplyInquirePCIHostAdapterInformation; AssertCompileSize(ReplyInquirePCIHostAdapterInformation, 4); /** Structure for the INQUIRE_CONFIGURATION reply. */ typedef struct ReplyInquireConfiguration { unsigned char uReserved1 : 5; bool fDmaChannel5 : 1; bool fDmaChannel6 : 1; bool fDmaChannel7 : 1; bool fIrqChannel9 : 1; bool fIrqChannel10 : 1; bool fIrqChannel11 : 1; bool fIrqChannel12 : 1; unsigned char uReserved2 : 1; bool fIrqChannel14 : 1; bool fIrqChannel15 : 1; unsigned char uReserved3 : 1; unsigned char uHostAdapterId : 4; unsigned char uReserved4 : 4; } ReplyInquireConfiguration, *PReplyInquireConfiguration; AssertCompileSize(ReplyInquireConfiguration, 3); /** Structure for the INQUIRE_SETUP_INFORMATION reply. */ typedef struct ReplyInquireSetupInformationSynchronousValue { unsigned char uOffset : 4; unsigned char uTransferPeriod : 3; bool fSynchronous : 1; }ReplyInquireSetupInformationSynchronousValue, *PReplyInquireSetupInformationSynchronousValue; AssertCompileSize(ReplyInquireSetupInformationSynchronousValue, 1); typedef struct ReplyInquireSetupInformation { bool fSynchronousInitiationEnabled : 1; bool fParityCheckingEnabled : 1; unsigned char uReserved1 : 6; uint8_t uBusTransferRate; uint8_t uPreemptTimeOnBus; uint8_t uTimeOffBus; uint8_t cMailbox; Addr24 MailboxAddress; ReplyInquireSetupInformationSynchronousValue SynchronousValuesId0To7[8]; uint8_t uDisconnectPermittedId0To7; uint8_t uSignature; uint8_t uCharacterD; uint8_t uHostBusType; uint8_t uWideTransferPermittedId0To7; uint8_t uWideTransfersActiveId0To7; ReplyInquireSetupInformationSynchronousValue SynchronousValuesId8To15[8]; uint8_t uDisconnectPermittedId8To15; uint8_t uReserved2; uint8_t uWideTransferPermittedId8To15; uint8_t uWideTransfersActiveId8To15; } ReplyInquireSetupInformation, *PReplyInquireSetupInformation; AssertCompileSize(ReplyInquireSetupInformation, 34); /** Structure for the INQUIRE_EXTENDED_SETUP_INFORMATION. */ #pragma pack(1) typedef struct ReplyInquireExtendedSetupInformation { uint8_t uBusType; uint8_t uBiosAddress; uint16_t u16ScatterGatherLimit; uint8_t cMailbox; uint32_t uMailboxAddressBase; unsigned char uReserved1 : 2; bool fFastEISA : 1; unsigned char uReserved2 : 3; bool fLevelSensitiveInterrupt : 1; unsigned char uReserved3 : 1; unsigned char aFirmwareRevision[3]; bool fHostWideSCSI : 1; bool fHostDifferentialSCSI : 1; bool fHostSupportsSCAM : 1; bool fHostUltraSCSI : 1; bool fHostSmartTermination : 1; unsigned char uReserved4 : 3; } ReplyInquireExtendedSetupInformation, *PReplyInquireExtendedSetupInformation; AssertCompileSize(ReplyInquireExtendedSetupInformation, 14); #pragma pack() /** Structure for the INITIALIZE EXTENDED MAILBOX request. */ #pragma pack(1) typedef struct RequestInitializeExtendedMailbox { /** Number of mailboxes in guest memory. */ uint8_t cMailbox; /** Physical address of the first mailbox. */ uint32_t uMailboxBaseAddress; } RequestInitializeExtendedMailbox, *PRequestInitializeExtendedMailbox; AssertCompileSize(RequestInitializeExtendedMailbox, 5); #pragma pack() /** Structure for the INITIALIZE MAILBOX request. */ typedef struct { /** Number of mailboxes to set up. */ uint8_t cMailbox; /** Physical address of the first mailbox. */ Addr24 aMailboxBaseAddr; } RequestInitMbx, *PRequestInitMbx; AssertCompileSize(RequestInitMbx, 4); /** * Structure of a mailbox in guest memory. * The incoming and outgoing mailbox have the same size * but the incoming one has some more fields defined which * are marked as reserved in the outgoing one. * The last field is also different from the type. * For outgoing mailboxes it is the action and * for incoming ones the completion status code for the task. * We use one structure for both types. */ typedef struct Mailbox32 { /** Physical address of the CCB structure in the guest memory. */ uint32_t u32PhysAddrCCB; /** Type specific data. */ union { /** For outgoing mailboxes. */ struct { /** Reserved */ uint8_t uReserved[3]; /** Action code. */ uint8_t uActionCode; } out; /** For incoming mailboxes. */ struct { /** The host adapter status after finishing the request. */ uint8_t uHostAdapterStatus; /** The status of the device which executed the request after executing it. */ uint8_t uTargetDeviceStatus; /** Reserved. */ uint8_t uReserved; /** The completion status code of the request. */ uint8_t uCompletionCode; } in; } u; } Mailbox32, *PMailbox32; AssertCompileSize(Mailbox32, 8); /** Old style 24-bit mailbox entry. */ typedef struct Mailbox24 { /** Mailbox command (incoming) or state (outgoing). */ uint8_t uCmdState; /** Physical address of the CCB structure in the guest memory. */ Addr24 aPhysAddrCCB; } Mailbox24, *PMailbox24; AssertCompileSize(Mailbox24, 4); /** * Action codes for outgoing mailboxes. */ enum BUSLOGIC_MAILBOX_OUTGOING_ACTION { BUSLOGIC_MAILBOX_OUTGOING_ACTION_FREE = 0x00, BUSLOGIC_MAILBOX_OUTGOING_ACTION_START_COMMAND = 0x01, BUSLOGIC_MAILBOX_OUTGOING_ACTION_ABORT_COMMAND = 0x02 }; /** * Completion codes for incoming mailboxes. */ enum BUSLOGIC_MAILBOX_INCOMING_COMPLETION { BUSLOGIC_MAILBOX_INCOMING_COMPLETION_FREE = 0x00, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_WITHOUT_ERROR = 0x01, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_ABORTED = 0x02, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_ABORTED_NOT_FOUND = 0x03, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_WITH_ERROR = 0x04, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_INVALID_CCB = 0x05 }; /** * Host adapter status for incoming mailboxes. */ enum BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS { BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_CMD_COMPLETED = 0x00, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_LINKED_CMD_COMPLETED = 0x0a, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_LINKED_CMD_COMPLETED_WITH_FLAG = 0x0b, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_DATA_UNDERUN = 0x0c, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_SCSI_SELECTION_TIMEOUT = 0x11, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_DATA_OVERRUN = 0x12, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_UNEXPECTED_BUS_FREE = 0x13, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_INVALID_BUS_PHASE_REQUESTED = 0x14, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_INVALID_OUTGOING_MAILBOX_ACTION_CODE = 0x15, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_INVALID_COMMAND_OPERATION_CODE = 0x16, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_LINKED_CCB_HAS_INVALID_LUN = 0x17, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_INVALID_COMMAND_PARAMETER = 0x1a, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_AUTO_REQUEST_SENSE_FAILED = 0x1b, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_TAGGED_QUEUING_MESSAGE_REJECTED = 0x1c, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_UNSUPPORTED_MESSAGE_RECEIVED = 0x1d, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_HOST_ADAPTER_HARDWARE_FAILED = 0x20, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_TARGET_FAILED_RESPONSE_TO_ATN = 0x21, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_HOST_ADAPTER_ASSERTED_RST = 0x22, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_OTHER_DEVICE_ASSERTED_RST = 0x23, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_TARGET_DEVICE_RECONNECTED_IMPROPERLY = 0x24, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_HOST_ADAPTER_ASSERTED_BUS_DEVICE_RESET = 0x25, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_ABORT_QUEUE_GENERATED = 0x26, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_HOST_ADAPTER_SOFTWARE_ERROR = 0x27, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_HOST_ADAPTER_HARDWARE_TIMEOUT_ERROR = 0x30, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_SCSI_PARITY_ERROR_DETECTED = 0x34 }; /** * Device status codes for incoming mailboxes. */ enum BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS { BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_OPERATION_GOOD = 0x00, BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_CHECK_CONDITION = 0x02, BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_DEVICE_BUSY = 0x08 }; /** * Opcode types for CCB. */ enum BUSLOGIC_CCB_OPCODE { BUSLOGIC_CCB_OPCODE_INITIATOR_CCB = 0x00, BUSLOGIC_CCB_OPCODE_TARGET_CCB = 0x01, BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_SCATTER_GATHER = 0x02, BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_RESIDUAL_DATA_LENGTH = 0x03, BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_RESIDUAL_SCATTER_GATHER = 0x04, BUSLOGIC_CCB_OPCODE_BUS_DEVICE_RESET = 0x81 }; /** * Data transfer direction. */ enum BUSLOGIC_CCB_DIRECTION { BUSLOGIC_CCB_DIRECTION_UNKNOWN = 0x00, BUSLOGIC_CCB_DIRECTION_IN = 0x01, BUSLOGIC_CCB_DIRECTION_OUT = 0x02, BUSLOGIC_CCB_DIRECTION_NO_DATA = 0x03 }; /** * The command control block for a SCSI request. */ typedef struct CCB32 { /** Opcode. */ uint8_t uOpcode; /** Reserved */ unsigned char uReserved1 : 3; /** Data direction for the request. */ unsigned char uDataDirection : 2; /** Whether the request is tag queued. */ bool fTagQueued : 1; /** Queue tag mode. */ unsigned char uQueueTag : 2; /** Length of the SCSI CDB. */ uint8_t cbCDB; /** Sense data length. */ uint8_t cbSenseData; /** Data length. */ uint32_t cbData; /** Data pointer. * This points to the data region or a scatter gather list based on the opcode. */ uint32_t u32PhysAddrData; /** Reserved. */ uint8_t uReserved2[2]; /** Host adapter status. */ uint8_t uHostAdapterStatus; /** Device adapter status. */ uint8_t uDeviceStatus; /** The device the request is sent to. */ uint8_t uTargetId; /**The LUN in the device. */ unsigned char uLogicalUnit : 5; /** Legacy tag. */ bool fLegacyTagEnable : 1; /** Legacy queue tag. */ unsigned char uLegacyQueueTag : 2; /** The SCSI CDB. (A CDB can be 12 bytes long.) */ uint8_t abCDB[12]; /** Reserved. */ uint8_t uReserved3[6]; /** Sense data pointer. */ uint32_t u32PhysAddrSenseData; } CCB32, *PCCB32; AssertCompileSize(CCB32, 40); /** * The 24-bit command control block. */ typedef struct CCB24 { /** Opcode. */ uint8_t uOpcode; /** The LUN in the device. */ unsigned char uLogicalUnit : 3; /** Data direction for the request. */ unsigned char uDataDirection : 2; /** The target device ID. */ unsigned char uTargetId : 3; /** Length of the SCSI CDB. */ uint8_t cbCDB; /** Sense data length. */ uint8_t cbSenseData; /** Data length. */ Len24 acbData; /** Data pointer. * This points to the data region or a scatter gather list based on the opc */ Addr24 aPhysAddrData; /** Pointer to next CCB for linked commands. */ Addr24 aPhysAddrLink; /** Command linking identifier. */ uint8_t uLinkId; /** Host adapter status. */ uint8_t uHostAdapterStatus; /** Device adapter status. */ uint8_t uDeviceStatus; /** Two unused bytes. */ uint8_t aReserved[2]; /** The SCSI CDB. (A CDB can be 12 bytes long.) */ uint8_t abCDB[12]; } CCB24, *PCCB24; AssertCompileSize(CCB24, 30); /** * The common 24-bit/32-bit command control block. The 32-bit CCB is laid out * such that many fields are in the same location as in the older 24-bit CCB. */ typedef struct CCBC { /** Opcode. */ uint8_t uOpcode; /** The LUN in the device. */ unsigned char uPad1 : 3; /** Data direction for the request. */ unsigned char uDataDirection : 2; /** The target device ID. */ unsigned char uPad2 : 3; /** Length of the SCSI CDB. */ uint8_t cbCDB; /** Sense data length. */ uint8_t cbSenseData; uint8_t aPad1[10]; /** Host adapter status. */ uint8_t uHostAdapterStatus; /** Device adapter status. */ uint8_t uDeviceStatus; uint8_t aPad2[2]; /** The SCSI CDB (up to 12 bytes). */ uint8_t abCDB[12]; } CCBC, *PCCBC; AssertCompileSize(CCBC, 30); /* Make sure that the 24-bit/32-bit/common CCB offsets match. */ AssertCompileMemberOffset(CCBC, cbCDB, 2); AssertCompileMemberOffset(CCB24, cbCDB, 2); AssertCompileMemberOffset(CCB32, cbCDB, 2); AssertCompileMemberOffset(CCBC, uHostAdapterStatus, 14); AssertCompileMemberOffset(CCB24, uHostAdapterStatus, 14); AssertCompileMemberOffset(CCB32, uHostAdapterStatus, 14); AssertCompileMemberOffset(CCBC, abCDB, 18); AssertCompileMemberOffset(CCB24, abCDB, 18); AssertCompileMemberOffset(CCB32, abCDB, 18); /** A union of all CCB types (24-bit/32-bit/common). */ typedef union CCBU { CCB32 n; /**< New 32-bit CCB. */ CCB24 o; /**< Old 24-bit CCB. */ CCBC c; /**< Common CCB subset. */ } CCBU, *PCCBU; /** 32-bit scatter-gather list entry. */ typedef struct SGE32 { uint32_t cbSegment; uint32_t u32PhysAddrSegmentBase; } SGE32, *PSGE32; AssertCompileSize(SGE32, 8); /** 24-bit scatter-gather list entry. */ typedef struct SGE24 { Len24 acbSegment; Addr24 aPhysAddrSegmentBase; } SGE24, *PSGE24; AssertCompileSize(SGE24, 6); /** * The structure for the "Execute SCSI Command" command. */ typedef struct ESCMD { /** Data length. */ uint32_t cbData; /** Data pointer. */ uint32_t u32PhysAddrData; /** The device the request is sent to. */ uint8_t uTargetId; /** The LUN in the device. */ uint8_t uLogicalUnit; /** Reserved */ unsigned char uReserved1 : 3; /** Data direction for the request. */ unsigned char uDataDirection : 2; /** Reserved */ unsigned char uReserved2 : 3; /** Length of the SCSI CDB. */ uint8_t cbCDB; /** The SCSI CDB. (A CDB can be 12 bytes long.) */ uint8_t abCDB[12]; } ESCMD, *PESCMD; AssertCompileSize(ESCMD, 24); /** * Task state for a CCB request. */ typedef struct BUSLOGICREQ { /** PDM extended media interface I/O request hande. */ PDMMEDIAEXIOREQ hIoReq; /** Device this task is assigned to. */ PBUSLOGICDEVICE pTargetDevice; /** The command control block from the guest. */ CCBU CCBGuest; /** Guest physical address of th CCB. */ RTGCPHYS GCPhysAddrCCB; /** Pointer to the R3 sense buffer. */ uint8_t *pbSenseBuffer; /** Flag whether this is a request from the BIOS. */ bool fBIOS; /** 24-bit request flag (default is 32-bit). */ bool fIs24Bit; /** SCSI status code. */ uint8_t u8ScsiSts; } BUSLOGICREQ; /** * S/G buffer copy arguments. */ typedef struct BUSLOGICCOPYARGS { /** Pointer to the shared BusLogic instance data. */ PBUSLOGIC pThis; /** Pointer to the device instance data. */ PPDMDEVINS pDevIns; /** Pointer to the SCSI command buffer. */ PESCMD pCmd; /** Number of bytes copied already. */ size_t cbCopied; } BUSLOGICCOPYARGS; /** Pointer to BUSLOGICCOPYARGS. */ typedef BUSLOGICCOPYARGS *PBUSLOGICCOPYARGS; #ifdef IN_RING3 /** * Memory buffer callback. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param GCPhys The guest physical address of the memory buffer. * @param pSgBuf The pointer to the host R3 S/G buffer. * @param cbCopy How many bytes to copy between the two buffers. * @param pcbSkip Initially contains the amount of bytes to skip * starting from the guest physical address before * accessing the S/G buffer and start copying data. * On return this contains the remaining amount if * cbCopy < *pcbSkip or 0 otherwise. */ typedef DECLCALLBACKTYPE(void, FNBUSLOGICR3MEMCOPYCALLBACK,(PPDMDEVINS pDevIns, PBUSLOGIC pThis, RTGCPHYS GCPhys, PRTSGBUF pSgBuf, size_t cbCopy, size_t *pcbSkip)); /** Pointer to a memory copy buffer callback. */ typedef FNBUSLOGICR3MEMCOPYCALLBACK *PFNBUSLOGICR3MEMCOPYCALLBACK; #endif #ifndef VBOX_DEVICE_STRUCT_TESTCASE /********************************************************************************************************************************* * Internal Functions * *********************************************************************************************************************************/ #ifdef IN_RING3 static int buslogicR3RegisterISARange(PPDMDEVINS pDevIns, PBUSLOGIC pThis, uint8_t uBaseCode); #endif /** * Assert IRQ line of the BusLogic adapter. Rather than using * the more modern method of the guest explicitly only clearing * the interrupt causes it handled, BusLogic never reports all * interrupts at once. Instead, new interrupts are postponed if * an interrupt of a different type is still pending. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param fSuppressIrq Flag to suppress IRQ generation regardless of fIRQEnabled * @param uIrqType Type of interrupt being generated. */ static void buslogicSetInterrupt(PPDMDEVINS pDevIns, PBUSLOGIC pThis, bool fSuppressIrq, uint8_t uIrqType) { LogFlowFunc(("pThis=%#p, setting %#02x (current %#02x, pending %#02x)\n", pThis, uIrqType, pThis->regInterrupt, pThis->uPendingIntr)); /* A CMDC interrupt overrides other pending interrupts. The documentation may claim * otherwise, but a real BT-958 replaces a pending IMBL with a CMDC; the IMBL simply * vanishes. However, if there's a CMDC already active, another CMDC is latched and * reported once the first CMDC is cleared. */ if (uIrqType & BL_INTR_CMDC) { Assert(uIrqType == BL_INTR_CMDC); if ((pThis->regInterrupt & BL_INTR_INTV) && !(pThis->regInterrupt & BL_INTR_CMDC)) Log(("CMDC overriding pending interrupt! (was %02x)\n", pThis->regInterrupt)); if (!(pThis->regInterrupt & BL_INTR_CMDC)) pThis->regInterrupt |= uIrqType | BL_INTR_INTV; /* Report now. */ else pThis->uPendingIntr |= uIrqType; /* Report later. */ } else if (uIrqType & (BL_INTR_IMBL | BL_INTR_OMBR)) { /* If the CMDC interrupt is pending, store IMBL/OMBR for later. Note that IMBL * and OMBR can be reported together even if an interrupt of the other type is * already pending. */ if (!(pThis->regInterrupt & BL_INTR_CMDC)) pThis->regInterrupt |= uIrqType | BL_INTR_INTV; /* Report now. */ else pThis->uPendingIntr |= uIrqType; /* Report later. */ } else /* We do not expect to see BL_INTR_RSTS at this point. */ AssertMsgFailed(("Invalid interrupt state (unknown interrupt cause)!\n")); AssertMsg(pThis->regInterrupt, ("Invalid interrupt state (interrupt not set)!\n")); AssertMsg(pThis->regInterrupt != BL_INTR_INTV, ("Invalid interrupt state (set but no cause)!\n")); if (pThis->fIRQEnabled && !fSuppressIrq) { if (!pThis->uIsaIrq) PDMDevHlpPCISetIrq(pDevIns, 0, 1); else PDMDevHlpISASetIrq(pDevIns, pThis->uIsaIrq, 1); } } /** * Deasserts the interrupt line of the BusLogic adapter. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. */ static void buslogicClearInterrupt(PPDMDEVINS pDevIns, PBUSLOGIC pThis) { LogFlowFunc(("pThis=%#p, clearing %#02x (pending %#02x)\n", pThis, pThis->regInterrupt, pThis->uPendingIntr)); pThis->regInterrupt = 0; pThis->regStatus &= ~BL_STAT_CMDINV; if (!pThis->uIsaIrq) PDMDevHlpPCISetIrq(pDevIns, 0, 0); else PDMDevHlpISASetIrq(pDevIns, pThis->uIsaIrq, 0); /* If there's another pending interrupt, report it now. */ if (pThis->uPendingIntr) { buslogicSetInterrupt(pDevIns, pThis, false, pThis->uPendingIntr); pThis->uPendingIntr = 0; } } #if defined(IN_RING3) /** * Advances the mailbox pointer to the next slot. * * @returns nothing. * @param pThis Pointer to the shared BusLogic instance data. */ DECLINLINE(void) buslogicR3OutgoingMailboxAdvance(PBUSLOGIC pThis) { pThis->uMailboxOutgoingPositionCurrent = (pThis->uMailboxOutgoingPositionCurrent + 1) % pThis->cMailbox; } /** * Initialize local RAM of host adapter with default values. * * @returns nothing. * @param pThis Pointer to the shared BusLogic instance data. */ static void buslogicR3InitializeLocalRam(PBUSLOGIC pThis) { /* * These values are mostly from what I think is right * looking at the dmesg output from a Linux guest inside * a VMware server VM. * * So they don't have to be right :) */ memset(pThis->LocalRam.u8View, 0, sizeof(HostAdapterLocalRam)); pThis->LocalRam.structured.autoSCSIData.fLevelSensitiveInterrupt = true; pThis->LocalRam.structured.autoSCSIData.fParityCheckingEnabled = true; pThis->LocalRam.structured.autoSCSIData.fExtendedTranslation = true; /* Same as in geometry register. */ pThis->LocalRam.structured.autoSCSIData.u16DeviceEnabledMask = UINT16_MAX; /* All enabled. Maybe mask out non present devices? */ pThis->LocalRam.structured.autoSCSIData.u16WidePermittedMask = UINT16_MAX; pThis->LocalRam.structured.autoSCSIData.u16FastPermittedMask = UINT16_MAX; pThis->LocalRam.structured.autoSCSIData.u16SynchronousPermittedMask = UINT16_MAX; pThis->LocalRam.structured.autoSCSIData.u16DisconnectPermittedMask = UINT16_MAX; pThis->LocalRam.structured.autoSCSIData.fStrictRoundRobinMode = pThis->fStrictRoundRobinMode; pThis->LocalRam.structured.autoSCSIData.u16UltraPermittedMask = UINT16_MAX; pThis->LocalRam.structured.autoSCSIData.uSCSIId = 7; pThis->LocalRam.structured.autoSCSIData.uHostAdapterIoPortAddress = pThis->uDefaultISABaseCode == ISA_BASE_DISABLED ? 2 : pThis->uDefaultISABaseCode; /** @todo calculate checksum? */ } /** * Do a hardware reset of the buslogic adapter. * * @returns VBox status code. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param fResetIO Flag determining whether ISA I/O should be reset. */ static int buslogicR3HwReset(PPDMDEVINS pDevIns, PBUSLOGIC pThis, bool fResetIO) { LogFlowFunc(("pThis=%#p\n", pThis)); /* Reset registers to default values. */ pThis->regStatus = BL_STAT_HARDY | BL_STAT_INREQ; pThis->regGeometry = BL_GEOM_XLATEN; pThis->uOperationCode = 0xff; /* No command executing. */ pThis->uPrevCmd = 0xff; pThis->iParameter = 0; pThis->cbCommandParametersLeft = 0; pThis->fIRQEnabled = true; pThis->fStrictRoundRobinMode = false; pThis->fExtendedLunCCBFormat = false; pThis->uMailboxOutgoingPositionCurrent = 0; pThis->uMailboxIncomingPositionCurrent = 0; pThis->uAhaSigIdx = 0; pThis->cMailbox = 0; pThis->GCPhysAddrMailboxIncomingBase = 0; pThis->GCPhysAddrMailboxOutgoingBase = 0; /* Clear any active/pending interrupts. */ pThis->uPendingIntr = 0; buslogicClearInterrupt(pDevIns, pThis); /* Guest-initiated HBA reset does not affect ISA port I/O. */ if (fResetIO) buslogicR3RegisterISARange(pDevIns, pThis, pThis->uDefaultISABaseCode); buslogicR3InitializeLocalRam(pThis); return VINF_SUCCESS; } #endif /* IN_RING3 */ /** * Resets the command state machine for the next command and notifies the guest. * Note that suppressing CMDC also suppresses the interrupt, but not vice versa. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param fSuppressIrq Flag to suppress IRQ generation regardless of current state * @param fSuppressCMDC Flag to suppress command completion status as well */ static void buslogicCommandComplete(PPDMDEVINS pDevIns, PBUSLOGIC pThis, bool fSuppressIrq, bool fSuppressCMDC) { LogFlowFunc(("pThis=%#p\n", pThis)); Assert(pThis->uOperationCode != BUSLOGICCOMMAND_EXECUTE_MAILBOX_COMMAND); pThis->fUseLocalRam = false; pThis->regStatus |= BL_STAT_HARDY; pThis->regStatus &= ~BL_STAT_DIRRDY; pThis->iReply = 0; /* Some commands do not set CMDC when successful. */ if (!fSuppressCMDC) { /* Notify that the command is complete. */ buslogicSetInterrupt(pDevIns, pThis, fSuppressIrq, BL_INTR_CMDC); } pThis->uPrevCmd = pThis->uOperationCode; pThis->uOperationCode = 0xff; pThis->iParameter = 0; } /** * Memory write helper to handle PCI/ISA differences - metadata writes. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param GCPhys Guest physical memory address * @param pvBuf Host side buffer address * @param cbWrite Number of bytes to write */ static void blPhysWriteMeta(PPDMDEVINS pDevIns, PBUSLOGIC pThis, RTGCPHYS GCPhys, const void *pvBuf, size_t cbWrite) { if (!pThis->uIsaIrq) PDMDevHlpPCIPhysWriteMeta(pDevIns, GCPhys, pvBuf, cbWrite); else PDMDevHlpPhysWriteMeta(pDevIns, GCPhys, pvBuf, cbWrite); } /** * Memory read helper to handle PCI/ISA differences - metadata reads. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param GCPhys Guest physical memory address. * @param pvBuf Host side buffer address. * @param cbRead Number of bytes to read. */ static void blPhysReadMeta(PPDMDEVINS pDevIns, PBUSLOGIC pThis, RTGCPHYS GCPhys, void *pvBuf, size_t cbRead) { if (!pThis->uIsaIrq) PDMDevHlpPCIPhysReadMeta(pDevIns, GCPhys, pvBuf, cbRead); else PDMDevHlpPhysReadMeta(pDevIns, GCPhys, pvBuf, cbRead); } #if defined(IN_RING3) /** * Memory write helper to handle PCI/ISA differences - userdata writes. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param GCPhys Guest physical memory address * @param pvBuf Host side buffer address * @param cbWrite Number of bytes to write */ static void blPhysWriteUser(PPDMDEVINS pDevIns, PBUSLOGIC pThis, RTGCPHYS GCPhys, const void *pvBuf, size_t cbWrite) { if (!pThis->uIsaIrq) PDMDevHlpPCIPhysWriteUser(pDevIns, GCPhys, pvBuf, cbWrite); else PDMDevHlpPhysWriteUser(pDevIns, GCPhys, pvBuf, cbWrite); } /** * Memory read helper to handle PCI/ISA differences - userdata reads. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param GCPhys Guest physical memory address. * @param pvBuf Host side buffer address. * @param cbRead Number of bytes to read. */ static void blPhysReadUser(PPDMDEVINS pDevIns, PBUSLOGIC pThis, RTGCPHYS GCPhys, void *pvBuf, size_t cbRead) { if (!pThis->uIsaIrq) PDMDevHlpPCIPhysReadUser(pDevIns, GCPhys, pvBuf, cbRead); else PDMDevHlpPhysReadUser(pDevIns, GCPhys, pvBuf, cbRead); } /** * Initiates a hard reset which was issued from the guest. * * @returns nothing * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param fHardReset Flag initiating a hard (vs. soft) reset. */ static void buslogicR3InitiateReset(PPDMDEVINS pDevIns, PBUSLOGIC pThis, bool fHardReset) { LogFlowFunc(("pThis=%#p fHardReset=%d\n", pThis, fHardReset)); buslogicR3HwReset(pDevIns, pThis, false); if (fHardReset) { /* Set the diagnostic active bit in the status register and clear the ready state. */ pThis->regStatus |= BL_STAT_DACT; pThis->regStatus &= ~BL_STAT_HARDY; /* Remember when the guest initiated a reset (after we're done resetting). */ pThis->u64ResetTime = PDMDevHlpTMTimeVirtGetNano(pDevIns); } } /** * Send a mailbox with set status codes to the guest. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param GCPhysAddrCCB The physical guest address of the CCB the mailbox is for. * @param pCCBGuest The command control block. * @param uHostAdapterStatus The host adapter status code to set. * @param uDeviceStatus The target device status to set. * @param uMailboxCompletionCode Completion status code to set in the mailbox. */ static void buslogicR3SendIncomingMailbox(PPDMDEVINS pDevIns, PBUSLOGIC pThis, RTGCPHYS GCPhysAddrCCB, PCCBU pCCBGuest, uint8_t uHostAdapterStatus, uint8_t uDeviceStatus, uint8_t uMailboxCompletionCode) { Mailbox32 MbxIn; MbxIn.u32PhysAddrCCB = (uint32_t)GCPhysAddrCCB; MbxIn.u.in.uHostAdapterStatus = uHostAdapterStatus; MbxIn.u.in.uTargetDeviceStatus = uDeviceStatus; MbxIn.u.in.uReserved = 0; MbxIn.u.in.uCompletionCode = uMailboxCompletionCode; int rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSectIntr, VINF_SUCCESS); AssertRC(rc); RTGCPHYS GCPhysAddrMailboxIncoming = pThis->GCPhysAddrMailboxIncomingBase + ( pThis->uMailboxIncomingPositionCurrent * (pThis->fMbxIs24Bit ? sizeof(Mailbox24) : sizeof(Mailbox32)) ); if (uMailboxCompletionCode != BUSLOGIC_MAILBOX_INCOMING_COMPLETION_ABORTED_NOT_FOUND) { LogFlowFunc(("Completing CCB %RGp hstat=%u, dstat=%u, outgoing mailbox at %RGp\n", GCPhysAddrCCB, uHostAdapterStatus, uDeviceStatus, GCPhysAddrMailboxIncoming)); /* Update CCB. */ pCCBGuest->c.uHostAdapterStatus = uHostAdapterStatus; pCCBGuest->c.uDeviceStatus = uDeviceStatus; /* Rewrite CCB up to the CDB; perhaps more than necessary. */ blPhysWriteMeta(pDevIns, pThis, GCPhysAddrCCB, pCCBGuest, RT_UOFFSETOF(CCBC, abCDB)); } # ifdef RT_STRICT uint8_t uCode; unsigned uCodeOffs = pThis->fMbxIs24Bit ? RT_OFFSETOF(Mailbox24, uCmdState) : RT_OFFSETOF(Mailbox32, u.out.uActionCode); blPhysReadMeta(pDevIns, pThis, GCPhysAddrMailboxIncoming + uCodeOffs, &uCode, sizeof(uCode)); Assert(uCode == BUSLOGIC_MAILBOX_INCOMING_COMPLETION_FREE); # endif /* Update mailbox. */ if (pThis->fMbxIs24Bit) { Mailbox24 Mbx24; Mbx24.uCmdState = MbxIn.u.in.uCompletionCode; U32_TO_ADDR(Mbx24.aPhysAddrCCB, MbxIn.u32PhysAddrCCB); Log(("24-bit mailbox: completion code=%u, CCB at %RGp\n", Mbx24.uCmdState, (RTGCPHYS)ADDR_TO_U32(Mbx24.aPhysAddrCCB))); blPhysWriteMeta(pDevIns, pThis, GCPhysAddrMailboxIncoming, &Mbx24, sizeof(Mailbox24)); } else { Log(("32-bit mailbox: completion code=%u, CCB at %RGp\n", MbxIn.u.in.uCompletionCode, GCPhysAddrCCB)); blPhysWriteMeta(pDevIns, pThis, GCPhysAddrMailboxIncoming, &MbxIn, sizeof(Mailbox32)); } /* Advance to next mailbox position. */ pThis->uMailboxIncomingPositionCurrent++; if (pThis->uMailboxIncomingPositionCurrent >= pThis->cMailbox) pThis->uMailboxIncomingPositionCurrent = 0; # ifdef LOG_ENABLED ASMAtomicIncU32(&pThis->cInMailboxesReadyIfLogEnabled); # endif buslogicSetInterrupt(pDevIns, pThis, false, BL_INTR_IMBL); PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSectIntr); } # ifdef LOG_ENABLED /** * Dumps the content of a mailbox for debugging purposes. * * @return nothing * @param pMailbox The mailbox to dump. * @param fOutgoing true if dumping the outgoing state. * false if dumping the incoming state. */ static void buslogicR3DumpMailboxInfo(PMailbox32 pMailbox, bool fOutgoing) { Log(("%s: Dump for %s mailbox:\n", __FUNCTION__, fOutgoing ? "outgoing" : "incoming")); Log(("%s: u32PhysAddrCCB=%#x\n", __FUNCTION__, pMailbox->u32PhysAddrCCB)); if (fOutgoing) { Log(("%s: uActionCode=%u\n", __FUNCTION__, pMailbox->u.out.uActionCode)); } else { Log(("%s: uHostAdapterStatus=%u\n", __FUNCTION__, pMailbox->u.in.uHostAdapterStatus)); Log(("%s: uTargetDeviceStatus=%u\n", __FUNCTION__, pMailbox->u.in.uTargetDeviceStatus)); Log(("%s: uCompletionCode=%u\n", __FUNCTION__, pMailbox->u.in.uCompletionCode)); } } /** * Dumps the content of a command control block for debugging purposes. * * @returns nothing. * @param pCCB Pointer to the command control block to dump. * @param fIs24BitCCB Flag to determine CCB format. */ static void buslogicR3DumpCCBInfo(PCCBU pCCB, bool fIs24BitCCB) { Log(("%s: Dump for %s Command Control Block:\n", __FUNCTION__, fIs24BitCCB ? "24-bit" : "32-bit")); Log(("%s: uOpCode=%#x\n", __FUNCTION__, pCCB->c.uOpcode)); Log(("%s: uDataDirection=%u\n", __FUNCTION__, pCCB->c.uDataDirection)); Log(("%s: cbCDB=%u\n", __FUNCTION__, pCCB->c.cbCDB)); Log(("%s: cbSenseData=%u\n", __FUNCTION__, pCCB->c.cbSenseData)); Log(("%s: uHostAdapterStatus=%u\n", __FUNCTION__, pCCB->c.uHostAdapterStatus)); Log(("%s: uDeviceStatus=%u\n", __FUNCTION__, pCCB->c.uDeviceStatus)); if (fIs24BitCCB) { Log(("%s: cbData=%u\n", __FUNCTION__, LEN_TO_U32(pCCB->o.acbData))); Log(("%s: PhysAddrData=%#x\n", __FUNCTION__, ADDR_TO_U32(pCCB->o.aPhysAddrData))); Log(("%s: uTargetId=%u\n", __FUNCTION__, pCCB->o.uTargetId)); Log(("%s: uLogicalUnit=%u\n", __FUNCTION__, pCCB->o.uLogicalUnit)); } else { Log(("%s: cbData=%u\n", __FUNCTION__, pCCB->n.cbData)); Log(("%s: PhysAddrData=%#x\n", __FUNCTION__, pCCB->n.u32PhysAddrData)); Log(("%s: uTargetId=%u\n", __FUNCTION__, pCCB->n.uTargetId)); Log(("%s: uLogicalUnit=%u\n", __FUNCTION__, pCCB->n.uLogicalUnit)); Log(("%s: fTagQueued=%d\n", __FUNCTION__, pCCB->n.fTagQueued)); Log(("%s: uQueueTag=%u\n", __FUNCTION__, pCCB->n.uQueueTag)); Log(("%s: fLegacyTagEnable=%u\n", __FUNCTION__, pCCB->n.fLegacyTagEnable)); Log(("%s: uLegacyQueueTag=%u\n", __FUNCTION__, pCCB->n.uLegacyQueueTag)); Log(("%s: PhysAddrSenseData=%#x\n", __FUNCTION__, pCCB->n.u32PhysAddrSenseData)); } Log(("%s: uCDB[0]=%#x\n", __FUNCTION__, pCCB->c.abCDB[0])); for (int i = 1; i < pCCB->c.cbCDB; i++) Log(("%s: uCDB[%d]=%u\n", __FUNCTION__, i, pCCB->c.abCDB[i])); } # endif /* LOG_ENABLED */ /** * Allocate data buffer. * * @param pDevIns PDM device instance. * @param fIs24Bit Flag whether the 24bit SG format is used. * @param GCSGList Guest physical address of S/G list. * @param cEntries Number of list entries to read. * @param pSGEList Pointer to 32-bit S/G list storage. */ static void buslogicR3ReadSGEntries(PPDMDEVINS pDevIns, bool fIs24Bit, RTGCPHYS GCSGList, uint32_t cEntries, SGE32 *pSGEList) { /* Read the S/G entries. Convert 24-bit entries to 32-bit format. */ PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); if (fIs24Bit) { SGE24 aSGE24[32]; Assert(cEntries <= RT_ELEMENTS(aSGE24)); Log2(("Converting %u 24-bit S/G entries to 32-bit\n", cEntries)); blPhysReadMeta(pDevIns, pThis, GCSGList, &aSGE24, cEntries * sizeof(SGE24)); for (uint32_t i = 0; i < cEntries; ++i) { pSGEList[i].cbSegment = LEN_TO_U32(aSGE24[i].acbSegment); pSGEList[i].u32PhysAddrSegmentBase = ADDR_TO_U32(aSGE24[i].aPhysAddrSegmentBase); } } else blPhysReadMeta(pDevIns, pThis, GCSGList, pSGEList, cEntries * sizeof(SGE32)); } /** * Determines the size of th guest data buffer. * * @returns VBox status code. * @param pDevIns PDM device instance. * @param pCCBGuest The CCB of the guest. * @param fIs24Bit Flag whether the 24bit SG format is used. * @param pcbBuf Where to store the size of the guest data buffer on success. */ static int buslogicR3QueryDataBufferSize(PPDMDEVINS pDevIns, PCCBU pCCBGuest, bool fIs24Bit, size_t *pcbBuf) { int rc = VINF_SUCCESS; uint32_t cbDataCCB; uint32_t u32PhysAddrCCB; size_t cbBuf = 0; /* Extract the data length and physical address from the CCB. */ if (fIs24Bit) { u32PhysAddrCCB = ADDR_TO_U32(pCCBGuest->o.aPhysAddrData); cbDataCCB = LEN_TO_U32(pCCBGuest->o.acbData); } else { u32PhysAddrCCB = pCCBGuest->n.u32PhysAddrData; cbDataCCB = pCCBGuest->n.cbData; } #if 1 /* Hack for NT 10/91: A CCB describes a 2K buffer, but TEST UNIT READY is executed. This command * returns no data, hence the buffer must be left alone! */ if (pCCBGuest->c.abCDB[0] == 0) cbDataCCB = 0; #endif if ( (pCCBGuest->c.uDataDirection != BUSLOGIC_CCB_DIRECTION_NO_DATA) && cbDataCCB) { /* * The BusLogic adapter can handle two different data buffer formats. * The first one is that the data pointer entry in the CCB points to * the buffer directly. In second mode the data pointer points to a * scatter gather list which describes the buffer. */ if ( (pCCBGuest->c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_SCATTER_GATHER) || (pCCBGuest->c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_RESIDUAL_SCATTER_GATHER)) { uint32_t cScatterGatherGCRead; uint32_t iScatterGatherEntry; SGE32 aScatterGatherReadGC[32]; /* A buffer for scatter gather list entries read from guest memory. */ uint32_t cScatterGatherGCLeft = cbDataCCB / (fIs24Bit ? sizeof(SGE24) : sizeof(SGE32)); RTGCPHYS GCPhysAddrScatterGatherCurrent = u32PhysAddrCCB; /* Count number of bytes to transfer. */ do { cScatterGatherGCRead = (cScatterGatherGCLeft < RT_ELEMENTS(aScatterGatherReadGC)) ? cScatterGatherGCLeft : RT_ELEMENTS(aScatterGatherReadGC); cScatterGatherGCLeft -= cScatterGatherGCRead; buslogicR3ReadSGEntries(pDevIns, fIs24Bit, GCPhysAddrScatterGatherCurrent, cScatterGatherGCRead, aScatterGatherReadGC); for (iScatterGatherEntry = 0; iScatterGatherEntry < cScatterGatherGCRead; iScatterGatherEntry++) cbBuf += aScatterGatherReadGC[iScatterGatherEntry].cbSegment; /* Set address to the next entries to read. */ GCPhysAddrScatterGatherCurrent += cScatterGatherGCRead * (fIs24Bit ? sizeof(SGE24) : sizeof(SGE32)); } while (cScatterGatherGCLeft > 0); Log(("%s: cbBuf=%d\n", __FUNCTION__, cbBuf)); } else if ( pCCBGuest->c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB || pCCBGuest->c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_RESIDUAL_DATA_LENGTH) cbBuf = cbDataCCB; } if (RT_SUCCESS(rc)) *pcbBuf = cbBuf; return rc; } /** * Copy from guest to host memory worker. * * @copydoc FNBUSLOGICR3MEMCOPYCALLBACK */ static DECLCALLBACK(void) buslogicR3CopyBufferFromGuestWorker(PPDMDEVINS pDevIns, PBUSLOGIC pThis, RTGCPHYS GCPhys, PRTSGBUF pSgBuf, size_t cbCopy, size_t *pcbSkip) { size_t cbSkipped = RT_MIN(cbCopy, *pcbSkip); cbCopy -= cbSkipped; GCPhys += cbSkipped; *pcbSkip -= cbSkipped; while (cbCopy) { size_t cbSeg = cbCopy; void *pvSeg = RTSgBufGetNextSegment(pSgBuf, &cbSeg); AssertPtr(pvSeg); blPhysReadUser(pDevIns, pThis, GCPhys, pvSeg, cbSeg); GCPhys += cbSeg; cbCopy -= cbSeg; } } /** * Copy from host to guest memory worker. * * @copydoc FNBUSLOGICR3MEMCOPYCALLBACK */ static DECLCALLBACK(void) buslogicR3CopyBufferToGuestWorker(PPDMDEVINS pDevIns, PBUSLOGIC pThis, RTGCPHYS GCPhys, PRTSGBUF pSgBuf, size_t cbCopy, size_t *pcbSkip) { size_t cbSkipped = RT_MIN(cbCopy, *pcbSkip); cbCopy -= cbSkipped; GCPhys += cbSkipped; *pcbSkip -= cbSkipped; while (cbCopy) { size_t cbSeg = cbCopy; void *pvSeg = RTSgBufGetNextSegment(pSgBuf, &cbSeg); AssertPtr(pvSeg); blPhysWriteUser(pDevIns, pThis, GCPhys, pvSeg, cbSeg); GCPhys += cbSeg; cbCopy -= cbSeg; } } /** * Walks the guest S/G buffer calling the given copy worker for every buffer. * * @returns The amout of bytes actually copied. * @param pDevIns The device instance. * @param pThis Pointer to the Buslogic device state. * @param pReq Pointer to the request state. * @param pfnCopyWorker The copy method to apply for each guest buffer. * @param pSgBuf The host S/G buffer. * @param cbSkip How many bytes to skip in advance before starting to copy. * @param cbCopy How many bytes to copy. */ static size_t buslogicR3SgBufWalker(PPDMDEVINS pDevIns, PBUSLOGIC pThis, PBUSLOGICREQ pReq, PFNBUSLOGICR3MEMCOPYCALLBACK pfnCopyWorker, PRTSGBUF pSgBuf, size_t cbSkip, size_t cbCopy) { uint32_t cbDataCCB; uint32_t u32PhysAddrCCB; size_t cbCopied = 0; /* * Add the amount to skip to the host buffer size to avoid a * few conditionals later on. */ cbCopy += cbSkip; /* Extract the data length and physical address from the CCB. */ if (pReq->fIs24Bit) { u32PhysAddrCCB = ADDR_TO_U32(pReq->CCBGuest.o.aPhysAddrData); cbDataCCB = LEN_TO_U32(pReq->CCBGuest.o.acbData); } else { u32PhysAddrCCB = pReq->CCBGuest.n.u32PhysAddrData; cbDataCCB = pReq->CCBGuest.n.cbData; } #if 1 /* Hack for NT 10/91: A CCB describes a 2K buffer, but TEST UNIT READY is executed. This command * returns no data, hence the buffer must be left alone! */ if (pReq->CCBGuest.c.abCDB[0] == 0) cbDataCCB = 0; #endif LogFlowFunc(("pReq=%#p cbDataCCB=%u direction=%u cbCopy=%zu\n", pReq, cbDataCCB, pReq->CCBGuest.c.uDataDirection, cbCopy)); if ( (cbDataCCB > 0) && ( pReq->CCBGuest.c.uDataDirection == BUSLOGIC_CCB_DIRECTION_IN || pReq->CCBGuest.c.uDataDirection == BUSLOGIC_CCB_DIRECTION_OUT || pReq->CCBGuest.c.uDataDirection == BUSLOGIC_CCB_DIRECTION_UNKNOWN)) { if ( (pReq->CCBGuest.c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_SCATTER_GATHER) || (pReq->CCBGuest.c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_RESIDUAL_SCATTER_GATHER)) { uint32_t cScatterGatherGCRead; uint32_t iScatterGatherEntry; SGE32 aScatterGatherReadGC[32]; /* Number of scatter gather list entries read from guest memory. */ uint32_t cScatterGatherGCLeft = cbDataCCB / (pReq->fIs24Bit ? sizeof(SGE24) : sizeof(SGE32)); RTGCPHYS GCPhysAddrScatterGatherCurrent = u32PhysAddrCCB; do { cScatterGatherGCRead = (cScatterGatherGCLeft < RT_ELEMENTS(aScatterGatherReadGC)) ? cScatterGatherGCLeft : RT_ELEMENTS(aScatterGatherReadGC); cScatterGatherGCLeft -= cScatterGatherGCRead; buslogicR3ReadSGEntries(pDevIns, pReq->fIs24Bit, GCPhysAddrScatterGatherCurrent, cScatterGatherGCRead, aScatterGatherReadGC); for (iScatterGatherEntry = 0; iScatterGatherEntry < cScatterGatherGCRead && cbCopy > 0; iScatterGatherEntry++) { RTGCPHYS GCPhysAddrDataBase; size_t cbCopyThis; Log(("%s: iScatterGatherEntry=%u\n", __FUNCTION__, iScatterGatherEntry)); GCPhysAddrDataBase = (RTGCPHYS)aScatterGatherReadGC[iScatterGatherEntry].u32PhysAddrSegmentBase; cbCopyThis = RT_MIN(cbCopy, aScatterGatherReadGC[iScatterGatherEntry].cbSegment); Log(("%s: GCPhysAddrDataBase=%RGp cbCopyThis=%zu\n", __FUNCTION__, GCPhysAddrDataBase, cbCopyThis)); pfnCopyWorker(pDevIns, pThis, GCPhysAddrDataBase, pSgBuf, cbCopyThis, &cbSkip); cbCopied += cbCopyThis; cbCopy -= cbCopyThis; } /* Set address to the next entries to read. */ GCPhysAddrScatterGatherCurrent += cScatterGatherGCRead * (pReq->fIs24Bit ? sizeof(SGE24) : sizeof(SGE32)); } while ( cScatterGatherGCLeft > 0 && cbCopy > 0); } else if ( pReq->CCBGuest.c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB || pReq->CCBGuest.c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_RESIDUAL_DATA_LENGTH) { /* The buffer is not scattered. */ RTGCPHYS GCPhysAddrDataBase = u32PhysAddrCCB; AssertMsg(GCPhysAddrDataBase != 0, ("Physical address is 0\n")); Log(("Non-scattered buffer:\n")); Log(("u32PhysAddrData=%#x\n", u32PhysAddrCCB)); Log(("cbData=%u\n", cbDataCCB)); Log(("GCPhysAddrDataBase=0x%RGp\n", GCPhysAddrDataBase)); /* Copy the data into the guest memory. */ pfnCopyWorker(pDevIns, pThis, GCPhysAddrDataBase, pSgBuf, RT_MIN(cbDataCCB, cbCopy), &cbSkip); cbCopied += RT_MIN(cbDataCCB, cbCopy); } } return cbCopied - RT_MIN(cbSkip, cbCopied); } /** * Copies a data buffer into the S/G buffer set up by the guest. * * @returns Amount of bytes copied to the guest. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param pReq Request structure. * @param pSgBuf The S/G buffer to copy from. * @param cbSkip How many bytes to skip in advance before starting to copy. * @param cbCopy How many bytes to copy. */ static size_t buslogicR3CopySgBufToGuest(PPDMDEVINS pDevIns, PBUSLOGIC pThis, PBUSLOGICREQ pReq, PRTSGBUF pSgBuf, size_t cbSkip, size_t cbCopy) { return buslogicR3SgBufWalker(pDevIns, pThis, pReq, buslogicR3CopyBufferToGuestWorker, pSgBuf, cbSkip, cbCopy); } /** * Copies the guest S/G buffer into a host data buffer. * * @returns Amount of bytes copied from the guest. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param pReq Request structure. * @param pSgBuf The S/G buffer to copy into. * @param cbSkip How many bytes to skip in advance before starting to copy. * @param cbCopy How many bytes to copy. */ static size_t buslogicR3CopySgBufFromGuest(PPDMDEVINS pDevIns, PBUSLOGIC pThis, PBUSLOGICREQ pReq, PRTSGBUF pSgBuf, size_t cbSkip, size_t cbCopy) { return buslogicR3SgBufWalker(pDevIns, pThis, pReq, buslogicR3CopyBufferFromGuestWorker, pSgBuf, cbSkip, cbCopy); } /** Convert sense buffer length taking into account shortcut values. */ static uint32_t buslogicR3ConvertSenseBufferLength(uint32_t cbSense) { /* Convert special sense buffer length values. */ if (cbSense == 0) cbSense = 14; /* 0 means standard 14-byte buffer. */ else if (cbSense == 1) cbSense = 0; /* 1 means no sense data. */ else if (cbSense < 8) AssertMsgFailed(("Reserved cbSense value of %d used!\n", cbSense)); return cbSense; } /** * Free the sense buffer. * * @returns nothing. * @param pReq Pointer to the request state. * @param fCopy If sense data should be copied to guest memory. */ static void buslogicR3SenseBufferFree(PBUSLOGICREQ pReq, bool fCopy) { uint32_t cbSenseBuffer; cbSenseBuffer = buslogicR3ConvertSenseBufferLength(pReq->CCBGuest.c.cbSenseData); /* Copy the sense buffer into guest memory if requested. */ if (fCopy && cbSenseBuffer) { PPDMDEVINS pDevIns = pReq->pTargetDevice->pDevIns; PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); RTGCPHYS GCPhysAddrSenseBuffer; /* With 32-bit CCBs, the (optional) sense buffer physical address is provided separately. * On the other hand, with 24-bit CCBs, the sense buffer is simply located at the end of * the CCB, right after the variable-length CDB. */ if (pReq->fIs24Bit) { GCPhysAddrSenseBuffer = pReq->GCPhysAddrCCB; GCPhysAddrSenseBuffer += pReq->CCBGuest.c.cbCDB + RT_OFFSETOF(CCB24, abCDB); } else GCPhysAddrSenseBuffer = pReq->CCBGuest.n.u32PhysAddrSenseData; Log3(("%s: sense buffer: %.*Rhxs\n", __FUNCTION__, cbSenseBuffer, pReq->pbSenseBuffer)); blPhysWriteMeta(pDevIns, pThis, GCPhysAddrSenseBuffer, pReq->pbSenseBuffer, cbSenseBuffer); } RTMemFree(pReq->pbSenseBuffer); pReq->pbSenseBuffer = NULL; } /** * Alloc the sense buffer. * * @returns VBox status code. * @param pReq Pointer to the task state. */ static int buslogicR3SenseBufferAlloc(PBUSLOGICREQ pReq) { pReq->pbSenseBuffer = NULL; uint32_t cbSenseBuffer = buslogicR3ConvertSenseBufferLength(pReq->CCBGuest.c.cbSenseData); if (cbSenseBuffer) { pReq->pbSenseBuffer = (uint8_t *)RTMemAllocZ(cbSenseBuffer); if (!pReq->pbSenseBuffer) return VERR_NO_MEMORY; } return VINF_SUCCESS; } #endif /* IN_RING3 */ /** * Parses the command buffer and executes it. * * @returns VBox status code. * @param pDevIns The PDM device instance. * @param pThis Pointer to the shared BusLogic instance data. */ static int buslogicProcessCommand(PPDMDEVINS pDevIns, PBUSLOGIC pThis) { int rc = VINF_SUCCESS; bool fSuppressIrq = false; bool fSuppressCMDC = false; bool fCmdComplete = true; LogFlowFunc(("pThis=%#p\n", pThis)); AssertMsg(pThis->uOperationCode != 0xff, ("There is no command to execute\n")); switch (pThis->uOperationCode) { case BUSLOGICCOMMAND_TEST_CMDC_INTERRUPT: /* Valid command, no reply. */ pThis->cbReplyParametersLeft = 0; break; case BUSLOGICCOMMAND_INQUIRE_PCI_HOST_ADAPTER_INFORMATION: { PReplyInquirePCIHostAdapterInformation pReply = (PReplyInquirePCIHostAdapterInformation)pThis->aReplyBuffer; memset(pReply, 0, sizeof(ReplyInquirePCIHostAdapterInformation)); /* Modeled after a real BT-958(D) */ pReply->HighByteTerminated = 1; pReply->LowByteTerminated = 1; pReply->JP1 = 1; /* Closed; "Factory configured - do not alter" */ pReply->InformationIsValid = 1; pReply->IsaIOPort = pThis->uISABaseCode < 6 ? pThis->uISABaseCode : 0xff; pReply->IRQ = PCIDevGetInterruptLine(pDevIns->apPciDevs[0]); pThis->cbReplyParametersLeft = sizeof(ReplyInquirePCIHostAdapterInformation); break; } case BUSLOGICCOMMAND_SET_SCSI_SELECTION_TIMEOUT: { /* no-op */ pThis->cbReplyParametersLeft = 0; break; } case BUSLOGICCOMMAND_MODIFY_IO_ADDRESS: { /* Modify the ISA-compatible I/O port base. Note that this technically * violates the PCI spec, as this address is not reported through PCI. * However, it is required for compatibility with old drivers. */ #ifdef IN_RING3 /* We can do this from ring-0 now, but we'd like to see the LogRel, so we keep going back to ring-3 anyway. */ uint8_t baseCode = pThis->aCommandBuffer[0]; Log(("ISA I/O for PCI (code %x)\n", baseCode)); pThis->cbReplyParametersLeft = 0; if (baseCode < 8) { buslogicR3RegisterISARange(pDevIns, pThis, baseCode); fSuppressIrq = true; fSuppressCMDC = true; } else { Log(("ISA base %#x not valid for this adapter\n", baseCode)); pThis->regStatus |= BL_STAT_CMDINV; } break; #else AssertMsgFailed(("Must never get here!\n")); break; #endif } case BUSLOGICCOMMAND_INQUIRE_BOARD_ID: { /* The special option byte is important: If it is '0' or 'B', Windows NT drivers * for Adaptec AHA-154x may claim the adapter. The BusLogic drivers will claim * the adapter only when the byte is *not* '0' or 'B'. */ if (pThis->uDevType == DEV_AHA_1540B) { pThis->aReplyBuffer[0] = 'A'; /* Firmware option bytes */ pThis->aReplyBuffer[1] = '0'; /* Special option byte */ } else { pThis->aReplyBuffer[0] = 'A'; /* Firmware option bytes */ pThis->aReplyBuffer[1] = 'A'; /* Special option byte */ } /* We report version 5.07B. This reply will provide the first two digits. */ pThis->aReplyBuffer[2] = '5'; /* Major version 5 */ pThis->aReplyBuffer[3] = '0'; /* Minor version 0 */ pThis->cbReplyParametersLeft = 4; /* Reply is 4 bytes long */ break; } case BUSLOGICCOMMAND_INQUIRE_FIRMWARE_VERSION_3RD_LETTER: { if (pThis->uDevType == DEV_AHA_1540B) { /* Newer ASPI4DOS.SYS versions expect this command to fail. */ Log(("Command %#x not valid for this adapter\n", pThis->uOperationCode)); pThis->cbReplyParametersLeft = 0; pThis->regStatus |= BL_STAT_CMDINV; break; } pThis->aReplyBuffer[0] = '7'; pThis->cbReplyParametersLeft = 1; break; } case BUSLOGICCOMMAND_INQUIRE_FIRMWARE_VERSION_LETTER: { pThis->aReplyBuffer[0] = 'B'; pThis->cbReplyParametersLeft = 1; break; } case BUSLOGICCOMMAND_SET_ADAPTER_OPTIONS: /* The parameter list length is determined by the first byte of the command buffer. */ if (pThis->iParameter == 1) { /* First pass - set the number of following parameter bytes. */ pThis->cbCommandParametersLeft = RT_MIN(pThis->aCommandBuffer[0], sizeof(pThis->aCommandBuffer) - 1); Log(("Set HA options: %u bytes follow\n", pThis->cbCommandParametersLeft)); } else { /* Second pass - process received data. */ Log(("Set HA options: received %u bytes\n", pThis->aCommandBuffer[0])); /* We ignore the data - it only concerns the SCSI hardware protocol. */ } pThis->cbReplyParametersLeft = 0; break; case BUSLOGICCOMMAND_EXECUTE_SCSI_COMMAND: /* The parameter list length is at least 12 bytes; the 12th byte determines * the number of additional CDB bytes that will follow. */ if (pThis->iParameter == 12) { /* First pass - set the number of following CDB bytes. */ pThis->cbCommandParametersLeft = RT_MIN(pThis->aCommandBuffer[11], sizeof(pThis->aCommandBuffer) - 12); Log(("Execute SCSI cmd: %u more bytes follow\n", pThis->cbCommandParametersLeft)); } else { PESCMD pCmd; /* Second pass - process received data. */ Log(("Execute SCSI cmd: received %u bytes\n", pThis->aCommandBuffer[0])); pCmd = (PESCMD)pThis->aCommandBuffer; Log(("Addr %08X, cbData %08X, cbCDB=%u\n", pCmd->u32PhysAddrData, pCmd->cbData, pCmd->cbCDB)); if (!ASMAtomicXchgBool(&pThis->fBiosReqPending, true)) { /* Wake up the worker thread. */ int rc2 = PDMDevHlpSUPSemEventSignal(pDevIns, pThis->hEvtProcess); AssertRC(rc2); } fCmdComplete = false; } break; case BUSLOGICCOMMAND_INQUIRE_HOST_ADAPTER_MODEL_NUMBER: { /* Not supported on AHA-154x. */ if (pThis->uDevType == DEV_AHA_1540B) { Log(("Command %#x not valid for this adapter\n", pThis->uOperationCode)); pThis->cbReplyParametersLeft = 0; pThis->regStatus |= BL_STAT_CMDINV; break; } /* The reply length is set by the guest and is found in the first byte of the command buffer. */ if (pThis->aCommandBuffer[0] > sizeof(pThis->aReplyBuffer)) { Log(("Requested too much adapter model number data (%u)!\n", pThis->aCommandBuffer[0])); pThis->regStatus |= BL_STAT_CMDINV; break; } pThis->cbReplyParametersLeft = pThis->aCommandBuffer[0]; memset(pThis->aReplyBuffer, 0, sizeof(pThis->aReplyBuffer)); const char aModelName[] = "958D "; /* Trailing \0 is fine, that's the filler anyway. */ int cCharsToTransfer = pThis->cbReplyParametersLeft <= sizeof(aModelName) ? pThis->cbReplyParametersLeft : sizeof(aModelName); for (int i = 0; i < cCharsToTransfer; i++) pThis->aReplyBuffer[i] = aModelName[i]; break; } case BUSLOGICCOMMAND_INQUIRE_CONFIGURATION: { uint8_t uIrq; if (pThis->uIsaIrq) uIrq = pThis->uIsaIrq; else uIrq = PCIDevGetInterruptLine(pDevIns->apPciDevs[0]); pThis->cbReplyParametersLeft = sizeof(ReplyInquireConfiguration); PReplyInquireConfiguration pReply = (PReplyInquireConfiguration)pThis->aReplyBuffer; memset(pReply, 0, sizeof(ReplyInquireConfiguration)); pReply->uHostAdapterId = 7; /* The controller has always 7 as ID. */ pReply->fDmaChannel6 = 1; /* DMA channel 6 is a good default. */ /* The PCI IRQ is not necessarily representable in this structure. * If that is the case, the guest likely won't function correctly, * therefore we log a warning. Note that for ISA configurations, we * can only allow IRQs that can be supported; for PCI, the HBA * has no control over IRQ assignment. */ switch (uIrq) { case 9: pReply->fIrqChannel9 = 1; break; case 10: pReply->fIrqChannel10 = 1; break; case 11: pReply->fIrqChannel11 = 1; break; case 12: pReply->fIrqChannel12 = 1; break; case 14: pReply->fIrqChannel14 = 1; break; case 15: pReply->fIrqChannel15 = 1; break; default: LogRel(("Warning: PCI IRQ %d cannot be represented as ISA!\n", uIrq)); break; } break; } case BUSLOGICCOMMAND_INQUIRE_EXTENDED_SETUP_INFORMATION: { /* Some Adaptec AHA-154x drivers (e.g. OS/2) execute this command and expect * it to fail. If it succeeds, the drivers refuse to load. However, some newer * Adaptec 154x models supposedly support it too?? */ if (pThis->uDevType == DEV_AHA_1540B) { Log(("Command %#x not valid for this adapter\n", pThis->uOperationCode)); pThis->cbReplyParametersLeft = 0; pThis->regStatus |= BL_STAT_CMDINV; break; } /* The reply length is set by the guest and is found in the first byte of the command buffer. */ pThis->cbReplyParametersLeft = pThis->aCommandBuffer[0]; PReplyInquireExtendedSetupInformation pReply = (PReplyInquireExtendedSetupInformation)pThis->aReplyBuffer; memset(pReply, 0, sizeof(ReplyInquireExtendedSetupInformation)); /** @todo should this reflect the RAM contents (AutoSCSIRam)? */ pReply->uBusType = 'E'; /* EISA style */ pReply->u16ScatterGatherLimit = 8192; pReply->cMailbox = pThis->cMailbox; pReply->uMailboxAddressBase = (uint32_t)pThis->GCPhysAddrMailboxOutgoingBase; pReply->fLevelSensitiveInterrupt = true; pReply->fHostWideSCSI = true; pReply->fHostUltraSCSI = true; memcpy(pReply->aFirmwareRevision, "07B", sizeof(pReply->aFirmwareRevision)); break; } case BUSLOGICCOMMAND_INQUIRE_SETUP_INFORMATION: { /* The reply length is set by the guest and is found in the first byte of the command buffer. */ pThis->cbReplyParametersLeft = pThis->aCommandBuffer[0]; PReplyInquireSetupInformation pReply = (PReplyInquireSetupInformation)pThis->aReplyBuffer; memset(pReply, 0, sizeof(ReplyInquireSetupInformation)); pReply->fSynchronousInitiationEnabled = true; pReply->fParityCheckingEnabled = true; pReply->cMailbox = pThis->cMailbox; U32_TO_ADDR(pReply->MailboxAddress, pThis->GCPhysAddrMailboxOutgoingBase); /* The 'D' signature (actually 'SD' for Storage Dimensions, and 'BD' for BusLogic) * prevents Adaptec's OS/2 drivers from getting too friendly with BusLogic hardware * and upsetting the HBA state. */ if (pThis->uDevType == DEV_AHA_1540B) { pReply->uSignature = 0; /* Zeros for Adaptec. */ pReply->uCharacterD = 0; } else { pReply->uSignature = 'B'; pReply->uCharacterD = 'D'; /* BusLogic model. */ } pReply->uHostBusType = 'F'; /* PCI bus. */ break; } case BUSLOGICCOMMAND_FETCH_HOST_ADAPTER_LOCAL_RAM: { /* * First element in the command buffer contains start offset to read from * and second one the number of bytes to read. */ uint8_t uOffset = pThis->aCommandBuffer[0]; pThis->cbReplyParametersLeft = pThis->aCommandBuffer[1]; pThis->fUseLocalRam = true; pThis->iReply = uOffset; break; } case BUSLOGICCOMMAND_INITIALIZE_MAILBOX: { PRequestInitMbx pRequest = (PRequestInitMbx)pThis->aCommandBuffer; pThis->cbReplyParametersLeft = 0; if (!pRequest->cMailbox) { Log(("cMailboxes=%u (24-bit mode), fail!\n", pThis->cMailbox)); pThis->regStatus |= BL_STAT_CMDINV; break; } pThis->fMbxIs24Bit = true; pThis->cMailbox = pRequest->cMailbox; pThis->uMailboxOutgoingPositionCurrent = pThis->uMailboxIncomingPositionCurrent = 0; pThis->GCPhysAddrMailboxOutgoingBase = (RTGCPHYS)ADDR_TO_U32(pRequest->aMailboxBaseAddr); /* The area for incoming mailboxes is right after the last entry of outgoing mailboxes. */ pThis->GCPhysAddrMailboxIncomingBase = pThis->GCPhysAddrMailboxOutgoingBase + (pThis->cMailbox * sizeof(Mailbox24)); Log(("GCPhysAddrMailboxOutgoingBase=%RGp\n", pThis->GCPhysAddrMailboxOutgoingBase)); Log(("GCPhysAddrMailboxIncomingBase=%RGp\n", pThis->GCPhysAddrMailboxIncomingBase)); Log(("cMailboxes=%u (24-bit mode)\n", pThis->cMailbox)); LogRel(("Initialized 24-bit mailbox, %d entries at %08x\n", pRequest->cMailbox, ADDR_TO_U32(pRequest->aMailboxBaseAddr))); pThis->regStatus &= ~BL_STAT_INREQ; break; } case BUSLOGICCOMMAND_INITIALIZE_EXTENDED_MAILBOX: { if (pThis->uDevType == DEV_AHA_1540B) { Log(("Command %#x not valid for this adapter\n", pThis->uOperationCode)); pThis->cbReplyParametersLeft = 0; pThis->regStatus |= BL_STAT_CMDINV; break; } PRequestInitializeExtendedMailbox pRequest = (PRequestInitializeExtendedMailbox)pThis->aCommandBuffer; pThis->cbReplyParametersLeft = 0; if (!pRequest->cMailbox) { Log(("cMailboxes=%u (32-bit mode), fail!\n", pThis->cMailbox)); pThis->regStatus |= BL_STAT_CMDINV; break; } pThis->fMbxIs24Bit = false; pThis->cMailbox = pRequest->cMailbox; pThis->uMailboxOutgoingPositionCurrent = pThis->uMailboxIncomingPositionCurrent = 0; pThis->GCPhysAddrMailboxOutgoingBase = (RTGCPHYS)pRequest->uMailboxBaseAddress; /* The area for incoming mailboxes is right after the last entry of outgoing mailboxes. */ pThis->GCPhysAddrMailboxIncomingBase = (RTGCPHYS)pRequest->uMailboxBaseAddress + (pThis->cMailbox * sizeof(Mailbox32)); Log(("GCPhysAddrMailboxOutgoingBase=%RGp\n", pThis->GCPhysAddrMailboxOutgoingBase)); Log(("GCPhysAddrMailboxIncomingBase=%RGp\n", pThis->GCPhysAddrMailboxIncomingBase)); Log(("cMailboxes=%u (32-bit mode)\n", pThis->cMailbox)); LogRel(("Initialized 32-bit mailbox, %d entries at %08x\n", pRequest->cMailbox, pRequest->uMailboxBaseAddress)); pThis->regStatus &= ~BL_STAT_INREQ; break; } case BUSLOGICCOMMAND_ENABLE_STRICT_ROUND_ROBIN_MODE: { if (pThis->aCommandBuffer[0] == 0) pThis->fStrictRoundRobinMode = false; else if (pThis->aCommandBuffer[0] == 1) pThis->fStrictRoundRobinMode = true; else AssertMsgFailed(("Invalid round robin mode %d\n", pThis->aCommandBuffer[0])); pThis->cbReplyParametersLeft = 0; break; } case BUSLOGICCOMMAND_SET_CCB_FORMAT: { if (pThis->aCommandBuffer[0] == 0) pThis->fExtendedLunCCBFormat = false; else if (pThis->aCommandBuffer[0] == 1) pThis->fExtendedLunCCBFormat = true; else AssertMsgFailed(("Invalid CCB format %d\n", pThis->aCommandBuffer[0])); pThis->cbReplyParametersLeft = 0; break; } case BUSLOGICCOMMAND_INQUIRE_INSTALLED_DEVICES_ID_0_TO_7: /* This is supposed to send TEST UNIT READY to each target/LUN. * We cheat and skip that, since we already know what's attached */ memset(pThis->aReplyBuffer, 0, 8); for (int i = 0; i < 8; ++i) { if (pThis->afDevicePresent[i]) pThis->aReplyBuffer[i] = 1; } pThis->aReplyBuffer[7] = 0; /* HA hardcoded at ID 7. */ pThis->cbReplyParametersLeft = 8; break; case BUSLOGICCOMMAND_INQUIRE_INSTALLED_DEVICES_ID_8_TO_15: /* See note about cheating above. */ memset(pThis->aReplyBuffer, 0, 8); for (int i = 0; i < 8; ++i) { if (pThis->afDevicePresent[i + 8]) pThis->aReplyBuffer[i] = 1; } pThis->cbReplyParametersLeft = 8; break; case BUSLOGICCOMMAND_INQUIRE_TARGET_DEVICES: { /* Each bit which is set in the 16bit wide variable means a present device. */ uint16_t u16TargetsPresentMask = 0; for (uint8_t i = 0; i < RT_ELEMENTS(pThis->afDevicePresent); i++) { if (pThis->afDevicePresent[i]) u16TargetsPresentMask |= (1 << i); } pThis->aReplyBuffer[0] = (uint8_t)u16TargetsPresentMask; pThis->aReplyBuffer[1] = (uint8_t)(u16TargetsPresentMask >> 8); pThis->cbReplyParametersLeft = 2; break; } case BUSLOGICCOMMAND_INQUIRE_SYNCHRONOUS_PERIOD: { if (pThis->aCommandBuffer[0] > sizeof(pThis->aReplyBuffer)) { Log(("Requested too much synch period inquiry (%u)!\n", pThis->aCommandBuffer[0])); pThis->regStatus |= BL_STAT_CMDINV; break; } pThis->cbReplyParametersLeft = pThis->aCommandBuffer[0]; for (uint8_t i = 0; i < pThis->cbReplyParametersLeft; i++) pThis->aReplyBuffer[i] = 0; /** @todo Figure if we need something other here. It's not needed for the linux driver */ break; } case BUSLOGICCOMMAND_DISABLE_HOST_ADAPTER_INTERRUPT: { /* Not supported on AHA-154x HBAs. */ if (pThis->uDevType == DEV_AHA_1540B) { Log(("Command %#x not valid for this adapter\n", pThis->uOperationCode)); pThis->cbReplyParametersLeft = 0; pThis->regStatus |= BL_STAT_CMDINV; break; } pThis->cbReplyParametersLeft = 0; if (pThis->aCommandBuffer[0] == 0) pThis->fIRQEnabled = false; else pThis->fIRQEnabled = true; /* No interrupt signaled regardless of enable/disable. NB: CMDC is still signaled! */ fSuppressIrq = true; break; } case BUSLOGICCOMMAND_ECHO_COMMAND_DATA: { pThis->aReplyBuffer[0] = pThis->aCommandBuffer[0]; pThis->cbReplyParametersLeft = 1; break; } case BUSLOGICCOMMAND_ENABLE_OUTGOING_MAILBOX_AVAILABLE_INTERRUPT: { uint8_t uEnable = pThis->aCommandBuffer[0]; pThis->cbReplyParametersLeft = 0; Log(("Enable OMBR: %u\n", uEnable)); /* Only 0/1 are accepted. */ if (uEnable > 1) pThis->regStatus |= BL_STAT_CMDINV; else { pThis->LocalRam.structured.autoSCSIData.uReserved6 = uEnable; fSuppressIrq = true; fSuppressCMDC = true; } break; } case BUSLOGICCOMMAND_SET_PREEMPT_TIME_ON_BUS: { pThis->cbReplyParametersLeft = 0; pThis->LocalRam.structured.autoSCSIData.uBusOnDelay = pThis->aCommandBuffer[0]; Log(("Bus-on time: %d\n", pThis->aCommandBuffer[0])); break; } case BUSLOGICCOMMAND_SET_TIME_OFF_BUS: { pThis->cbReplyParametersLeft = 0; pThis->LocalRam.structured.autoSCSIData.uBusOffDelay = pThis->aCommandBuffer[0]; Log(("Bus-off time: %d\n", pThis->aCommandBuffer[0])); break; } case BUSLOGICCOMMAND_SET_BUS_TRANSFER_RATE: { pThis->cbReplyParametersLeft = 0; pThis->LocalRam.structured.autoSCSIData.uDMATransferRate = pThis->aCommandBuffer[0]; Log(("Bus transfer rate: %02X\n", pThis->aCommandBuffer[0])); break; } case BUSLOGICCOMMAND_WRITE_BUSMASTER_CHIP_FIFO: { RTGCPHYS GCPhysFifoBuf; Addr24 addr; pThis->cbReplyParametersLeft = 0; addr.hi = pThis->aCommandBuffer[0]; addr.mid = pThis->aCommandBuffer[1]; addr.lo = pThis->aCommandBuffer[2]; GCPhysFifoBuf = (RTGCPHYS)ADDR_TO_U32(addr); Log(("Write busmaster FIFO at: %04X\n", ADDR_TO_U32(addr))); blPhysReadMeta(pDevIns, pThis, GCPhysFifoBuf, &pThis->LocalRam.u8View[64], 64); break; } case BUSLOGICCOMMAND_READ_BUSMASTER_CHIP_FIFO: { RTGCPHYS GCPhysFifoBuf; Addr24 addr; pThis->cbReplyParametersLeft = 0; addr.hi = pThis->aCommandBuffer[0]; addr.mid = pThis->aCommandBuffer[1]; addr.lo = pThis->aCommandBuffer[2]; GCPhysFifoBuf = (RTGCPHYS)ADDR_TO_U32(addr); Log(("Read busmaster FIFO at: %04X\n", ADDR_TO_U32(addr))); blPhysWriteMeta(pDevIns, pThis, GCPhysFifoBuf, &pThis->LocalRam.u8View[64], 64); break; } default: AssertMsgFailed(("Invalid command %#x\n", pThis->uOperationCode)); RT_FALL_THRU(); case BUSLOGICCOMMAND_EXT_BIOS_INFO: case BUSLOGICCOMMAND_UNLOCK_MAILBOX: /* Commands valid for Adaptec 154xC which we don't handle since * we pretend being 154xB compatible. Just mark the command as invalid. */ Log(("Command %#x not valid for this adapter\n", pThis->uOperationCode)); pThis->cbReplyParametersLeft = 0; pThis->regStatus |= BL_STAT_CMDINV; break; case BUSLOGICCOMMAND_EXECUTE_MAILBOX_COMMAND: /* Should be handled already. */ AssertMsgFailed(("Invalid mailbox execute state!\n")); } Log(("uOperationCode=%#x, cbReplyParametersLeft=%d\n", pThis->uOperationCode, pThis->cbReplyParametersLeft)); /* Fail command if too much parameter data requested. */ if ((pThis->cbCommandParametersLeft + pThis->iParameter) > sizeof(pThis->aCommandBuffer)) { Log(("Invalid command parameter length (%u)\n", pThis->cbCommandParametersLeft)); pThis->cbReplyParametersLeft = 0; pThis->cbCommandParametersLeft = 0; pThis->regStatus |= BL_STAT_CMDINV; } if (fCmdComplete) { /* Set the data in ready bit in the status register in case the command has a reply. */ if (pThis->cbReplyParametersLeft) pThis->regStatus |= BL_STAT_DIRRDY; else if (!pThis->cbCommandParametersLeft) buslogicCommandComplete(pDevIns, pThis, fSuppressIrq, fSuppressCMDC); } return rc; } /** * Read a register from the BusLogic adapter. * * @returns VBox status code. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param iRegister The index of the register to read. * @param pu32 Where to store the register content. */ static int buslogicRegisterRead(PPDMDEVINS pDevIns, PBUSLOGIC pThis, unsigned iRegister, uint32_t *pu32) { static const char s_szAhaSig[] = "ADAP"; int rc = VINF_SUCCESS; switch (iRegister) { case BUSLOGIC_REGISTER_STATUS: { *pu32 = pThis->regStatus; /* If the diagnostic active bit is set, we are in a guest-initiated * hard reset. If the guest reads the status register and waits for * the host adapter ready bit to be set, we terminate the reset right * away. However, guests may also expect the reset condition to clear * automatically after a period of time, in which case we can't show * the DIAG bit at all. */ if (pThis->regStatus & BL_STAT_DACT) { uint64_t u64AccessTime = PDMDevHlpTMTimeVirtGetNano(pDevIns); pThis->regStatus &= ~BL_STAT_DACT; pThis->regStatus |= BL_STAT_HARDY; if (u64AccessTime - pThis->u64ResetTime > BUSLOGIC_RESET_DURATION_NS) { /* If reset already expired, let the guest see that right away. */ *pu32 = pThis->regStatus; pThis->u64ResetTime = 0; } } break; } case BUSLOGIC_REGISTER_DATAIN: { AssertCompileSize(pThis->LocalRam, 256); AssertCompileSize(pThis->iReply, sizeof(uint8_t)); AssertCompileSize(pThis->cbReplyParametersLeft, sizeof(uint8_t)); if (pThis->fUseLocalRam) *pu32 = pThis->LocalRam.u8View[pThis->iReply]; else { /* * Real adapters seem to pad the reply with zeroes and allow up to 255 bytes even * if the real reply is shorter. */ if (pThis->iReply >= sizeof(pThis->aReplyBuffer)) *pu32 = 0; else *pu32 = pThis->aReplyBuffer[pThis->iReply]; } /* Careful about underflow - guest can read data register even if * no data is available. */ if (pThis->cbReplyParametersLeft) { pThis->iReply++; pThis->cbReplyParametersLeft--; if (!pThis->cbReplyParametersLeft) { /* * Reply finished, set command complete bit, unset data-in ready bit and * interrupt the guest if enabled. * NB: Some commands do not set the CMDC bit / raise completion interrupt. */ if (pThis->uOperationCode == BUSLOGICCOMMAND_FETCH_HOST_ADAPTER_LOCAL_RAM) buslogicCommandComplete(pDevIns, pThis, true /* fSuppressIrq */, true /* fSuppressCMDC */); else buslogicCommandComplete(pDevIns, pThis, false, false); } } LogFlowFunc(("data=%02x, iReply=%d, cbReplyParametersLeft=%u\n", *pu32, pThis->iReply, pThis->cbReplyParametersLeft)); break; } case BUSLOGIC_REGISTER_INTERRUPT: { *pu32 = pThis->regInterrupt; break; } case BUSLOGIC_REGISTER_GEOMETRY: { if (pThis->uDevType == DEV_AHA_1540B) { uint8_t off = pThis->uAhaSigIdx & 3; *pu32 = s_szAhaSig[off]; pThis->uAhaSigIdx = (off + 1) & 3; } else *pu32 = pThis->regGeometry; break; } default: *pu32 = UINT32_C(0xffffffff); } Log2(("%s: pu32=%p:{%.*Rhxs} iRegister=%d rc=%Rrc\n", __FUNCTION__, pu32, 1, pu32, iRegister, rc)); return rc; } /** * Write a value to a register. * * @returns VBox status code. * @param pDevIns The PDM device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param iRegister The index of the register to read. * @param uVal The value to write. */ static int buslogicRegisterWrite(PPDMDEVINS pDevIns, PBUSLOGIC pThis, unsigned iRegister, uint8_t uVal) { int rc = VINF_SUCCESS; switch (iRegister) { case BUSLOGIC_REGISTER_CONTROL: { if ((uVal & BL_CTRL_RHARD) || (uVal & BL_CTRL_RSOFT)) { #ifdef IN_RING3 bool fHardReset = !!(uVal & BL_CTRL_RHARD); LogRel(("BusLogic: %s reset\n", fHardReset ? "hard" : "soft")); buslogicR3InitiateReset(pDevIns, pThis, fHardReset); #else rc = VINF_IOM_R3_IOPORT_WRITE; #endif break; } rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSectIntr, VINF_IOM_R3_IOPORT_WRITE); if (rc != VINF_SUCCESS) return rc; #ifdef LOG_ENABLED uint32_t cMailboxesReady = ASMAtomicXchgU32(&pThis->cInMailboxesReadyIfLogEnabled, 0); Log(("%u incoming mailboxes were ready when this interrupt was cleared\n", cMailboxesReady)); #endif if (uVal & BL_CTRL_RINT) buslogicClearInterrupt(pDevIns, pThis); PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSectIntr); break; } case BUSLOGIC_REGISTER_COMMAND: { /* Fast path for mailbox execution command. */ if ((uVal == BUSLOGICCOMMAND_EXECUTE_MAILBOX_COMMAND) && (pThis->uOperationCode == 0xff)) { /// @todo Should fail if BL_STAT_INREQ is set /* If there are no mailboxes configured, don't even try to do anything. */ if (pThis->cMailbox) { ASMAtomicIncU32(&pThis->cMailboxesReady); if (!ASMAtomicXchgBool(&pThis->fNotificationSent, true)) { /* Wake up the worker thread. */ int rc2 = PDMDevHlpSUPSemEventSignal(pDevIns, pThis->hEvtProcess); AssertRC(rc2); } } return rc; } /* * Check if we are already fetch command parameters from the guest. * If not we initialize executing a new command. */ if (pThis->uOperationCode == 0xff) { pThis->uOperationCode = uVal; pThis->iParameter = 0; /* Mark host adapter as busy and clear the invalid status bit. */ pThis->regStatus &= ~(BL_STAT_HARDY | BL_STAT_CMDINV); /* Get the number of bytes for parameters from the command code. */ switch (pThis->uOperationCode) { case BUSLOGICCOMMAND_TEST_CMDC_INTERRUPT: case BUSLOGICCOMMAND_INQUIRE_FIRMWARE_VERSION_LETTER: case BUSLOGICCOMMAND_INQUIRE_BOARD_ID: case BUSLOGICCOMMAND_INQUIRE_FIRMWARE_VERSION_3RD_LETTER: case BUSLOGICCOMMAND_INQUIRE_PCI_HOST_ADAPTER_INFORMATION: case BUSLOGICCOMMAND_INQUIRE_CONFIGURATION: case BUSLOGICCOMMAND_INQUIRE_INSTALLED_DEVICES_ID_0_TO_7: case BUSLOGICCOMMAND_INQUIRE_INSTALLED_DEVICES_ID_8_TO_15: case BUSLOGICCOMMAND_INQUIRE_TARGET_DEVICES: pThis->cbCommandParametersLeft = 0; break; case BUSLOGICCOMMAND_MODIFY_IO_ADDRESS: case BUSLOGICCOMMAND_INQUIRE_EXTENDED_SETUP_INFORMATION: case BUSLOGICCOMMAND_DISABLE_HOST_ADAPTER_INTERRUPT: case BUSLOGICCOMMAND_INQUIRE_HOST_ADAPTER_MODEL_NUMBER: /* These commands are not on AHA-154x, some Adaptec drivers (ASPI4DOS.SYS) test them. */ if (pThis->uDevType == DEV_AHA_1540B) { pThis->cbCommandParametersLeft = 0; break; } RT_FALL_THRU(); case BUSLOGICCOMMAND_INQUIRE_SETUP_INFORMATION: case BUSLOGICCOMMAND_ENABLE_STRICT_ROUND_ROBIN_MODE: case BUSLOGICCOMMAND_SET_CCB_FORMAT: case BUSLOGICCOMMAND_INQUIRE_SYNCHRONOUS_PERIOD: case BUSLOGICCOMMAND_ECHO_COMMAND_DATA: case BUSLOGICCOMMAND_ENABLE_OUTGOING_MAILBOX_AVAILABLE_INTERRUPT: case BUSLOGICCOMMAND_SET_PREEMPT_TIME_ON_BUS: case BUSLOGICCOMMAND_SET_TIME_OFF_BUS: case BUSLOGICCOMMAND_SET_BUS_TRANSFER_RATE: pThis->cbCommandParametersLeft = 1; break; case BUSLOGICCOMMAND_FETCH_HOST_ADAPTER_LOCAL_RAM: pThis->cbCommandParametersLeft = 2; break; case BUSLOGICCOMMAND_READ_BUSMASTER_CHIP_FIFO: case BUSLOGICCOMMAND_WRITE_BUSMASTER_CHIP_FIFO: pThis->cbCommandParametersLeft = 3; break; case BUSLOGICCOMMAND_SET_SCSI_SELECTION_TIMEOUT: pThis->cbCommandParametersLeft = 4; break; case BUSLOGICCOMMAND_INITIALIZE_MAILBOX: pThis->cbCommandParametersLeft = sizeof(RequestInitMbx); break; case BUSLOGICCOMMAND_INITIALIZE_EXTENDED_MAILBOX: /* Some Adaptec drivers (ASPI4DOS.SYS) test this command. */ if (pThis->uDevType == DEV_AHA_1540B) { pThis->cbCommandParametersLeft = 0; break; } pThis->cbCommandParametersLeft = sizeof(RequestInitializeExtendedMailbox); break; case BUSLOGICCOMMAND_SET_ADAPTER_OPTIONS: /* There must be at least one byte following this command. */ pThis->cbCommandParametersLeft = 1; break; case BUSLOGICCOMMAND_EXECUTE_SCSI_COMMAND: /* 12 bytes + variable-length CDB. */ pThis->cbCommandParametersLeft = 12; break; case BUSLOGICCOMMAND_EXT_BIOS_INFO: case BUSLOGICCOMMAND_UNLOCK_MAILBOX: /* Invalid commands. */ pThis->cbCommandParametersLeft = 0; break; case BUSLOGICCOMMAND_EXECUTE_MAILBOX_COMMAND: /* Should not come here anymore. */ default: AssertMsgFailed(("Invalid operation code %#x\n", uVal)); } } else if (pThis->cbCommandParametersLeft) { #ifndef IN_RING3 /* This command must be executed in R3 as it rehooks the ISA I/O port. */ if (pThis->uOperationCode == BUSLOGICCOMMAND_MODIFY_IO_ADDRESS) { rc = VINF_IOM_R3_IOPORT_WRITE; break; } #endif /* * The real adapter would set the Command register busy bit in the status register. * The guest has to wait until it is unset. * We don't need to do it because the guest does not continue execution while we are in this * function. */ pThis->aCommandBuffer[pThis->iParameter] = uVal; pThis->iParameter++; pThis->cbCommandParametersLeft--; } /* Start execution of command if there are no parameters left. */ if (!pThis->cbCommandParametersLeft) { rc = buslogicProcessCommand(pDevIns, pThis); AssertMsgRC(rc, ("Processing command failed rc=%Rrc\n", rc)); } break; } /* On BusLogic adapters, the interrupt and geometry registers are R/W. * That is different from Adaptec 154x where those are read only. */ case BUSLOGIC_REGISTER_INTERRUPT: if (pThis->uDevType == DEV_AHA_1540B) break; pThis->regInterrupt = uVal; break; case BUSLOGIC_REGISTER_GEOMETRY: if (pThis->uDevType == DEV_AHA_1540B) break; pThis->regGeometry = uVal; break; default: AssertMsgFailed(("Register not available\n")); rc = VERR_IOM_IOPORT_UNUSED; } return rc; } /** * @callback_method_impl{FNIOMMMIONEWREAD} */ static DECLCALLBACK(VBOXSTRICTRC) buslogicMMIORead(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS off, void *pv, unsigned cb) { RT_NOREF(pDevIns, pvUser, off, pv, cb); /* the linux driver does not make use of the MMIO area. */ ASSERT_GUEST_MSG_FAILED(("MMIO Read: %RGp LB %u\n", off, cb)); return VINF_SUCCESS; } /** * @callback_method_impl{FNIOMMMIONEWWRITE} */ static DECLCALLBACK(VBOXSTRICTRC) buslogicMMIOWrite(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS off, void const *pv, unsigned cb) { RT_NOREF(pDevIns, pvUser, off, pv, cb); /* the linux driver does not make use of the MMIO area. */ ASSERT_GUEST_MSG_FAILED(("MMIO Write: %RGp LB %u: %.*Rhxs\n", off, cb, cb, pv)); return VINF_SUCCESS; } /** * @callback_method_impl{FNIOMIOPORTNEWIN} */ static DECLCALLBACK(VBOXSTRICTRC) buslogicIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t *pu32, unsigned cb) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); unsigned iRegister = offPort % 4; RT_NOREF(pvUser, cb); ASSERT_GUEST(cb == 1); return buslogicRegisterRead(pDevIns, pThis, iRegister, pu32); } /** * @callback_method_impl{FNIOMIOPORTNEWOUT} */ static DECLCALLBACK(VBOXSTRICTRC) buslogicIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); unsigned iRegister = offPort % 4; RT_NOREF(pvUser, cb); ASSERT_GUEST(cb == 1); int rc = buslogicRegisterWrite(pDevIns, pThis, iRegister, (uint8_t)u32); Log2(("#%d %s: pvUser=%#p cb=%d u32=%#x offPort=%#x rc=%Rrc\n", pDevIns->iInstance, __FUNCTION__, pvUser, cb, u32, offPort, rc)); return rc; } #ifdef IN_RING3 /** * Update the ISA I/O range. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param uBaseCode Encoded ISA I/O base; only low 3 bits are used. */ static int buslogicR3RegisterISARange(PPDMDEVINS pDevIns, PBUSLOGIC pThis, uint8_t uBaseCode) { uint8_t uCode = uBaseCode & MAX_ISA_BASE; uint16_t uNewBase = g_aISABases[uCode]; int rc = VINF_SUCCESS; LogFlowFunc(("ISA I/O code %02X, new base %X\n", uBaseCode, uNewBase)); /* Check if the same port range actually changed. */ if (uNewBase != pThis->IOISABase) { /* Unmap the old range, if necessary. */ if (pThis->IOISABase) { rc = PDMDevHlpIoPortUnmap(pDevIns, pThis->hIoPortsIsa); AssertRC(rc); } if (RT_SUCCESS(rc)) { pThis->IOISABase = 0; /* First mark as unregistered. */ pThis->uISABaseCode = ISA_BASE_DISABLED; if (uNewBase) { /* Register the new range if requested. */ rc = PDMDevHlpIoPortMap(pDevIns, pThis->hIoPortsIsa, uNewBase); if (RT_SUCCESS(rc)) { pThis->IOISABase = uNewBase; pThis->uISABaseCode = uCode; } } } if (RT_SUCCESS(rc)) { if (uNewBase) { Log(("ISA I/O base: %x\n", uNewBase)); LogRel(("BusLogic: ISA I/O base: %x\n", uNewBase)); } else { Log(("Disabling ISA I/O ports.\n")); LogRel(("BusLogic: ISA I/O disabled\n")); } } } return rc; } /** * Completes a request initiated by the BIOS through the BUSLOGICCOMMAND_EXECUTE_SCSI_COMMAND command. * * @returns nothing. * @param pThis Pointer to the shared BusLogic instance data. * @param u8ScsiSts The SCSI status code. */ static void buslogicR3ReqCompleteBios(PBUSLOGIC pThis, uint8_t u8ScsiSts) { pThis->cbReplyParametersLeft = 4; pThis->aReplyBuffer[0] = pThis->aReplyBuffer[1] = 0; pThis->aReplyBuffer[2] = u8ScsiSts; pThis->aReplyBuffer[3] = 0; pThis->regStatus |= BL_STAT_DIRRDY; } static int buslogicR3ReqComplete(PPDMDEVINS pDevIns, PBUSLOGIC pThis, PBUSLOGICCC pThisCC, PBUSLOGICREQ pReq, int rcReq) { RT_NOREF(rcReq); PBUSLOGICDEVICE pTgtDev = pReq->pTargetDevice; LogFlowFunc(("before decrement %u\n", pTgtDev->cOutstandingRequests)); ASMAtomicDecU32(&pTgtDev->cOutstandingRequests); LogFlowFunc(("after decrement %u\n", pTgtDev->cOutstandingRequests)); if (pReq->fBIOS) { uint8_t u8ScsiSts = pReq->u8ScsiSts; pTgtDev->pDrvMediaEx->pfnIoReqFree(pTgtDev->pDrvMediaEx, pReq->hIoReq); buslogicR3ReqCompleteBios(pThis, u8ScsiSts); } else { if (pReq->pbSenseBuffer) buslogicR3SenseBufferFree(pReq, (pReq->u8ScsiSts != SCSI_STATUS_OK)); /* Update residual data length. */ if ( (pReq->CCBGuest.c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_RESIDUAL_DATA_LENGTH) || (pReq->CCBGuest.c.uOpcode == BUSLOGIC_CCB_OPCODE_INITIATOR_CCB_RESIDUAL_SCATTER_GATHER)) { size_t cbResidual = 0; int rc = pTgtDev->pDrvMediaEx->pfnIoReqQueryResidual(pTgtDev->pDrvMediaEx, pReq->hIoReq, &cbResidual); AssertRC(rc); Assert(cbResidual == (uint32_t)cbResidual); if (pReq->fIs24Bit) U32_TO_LEN(pReq->CCBGuest.o.acbData, (uint32_t)cbResidual); else pReq->CCBGuest.n.cbData = (uint32_t)cbResidual; } /* * Save vital things from the request and free it before posting completion * to avoid that the guest submits a new request with the same ID as the still * allocated one. */ #ifdef LOG_ENABLED bool fIs24Bit = pReq->fIs24Bit; #endif uint8_t u8ScsiSts = pReq->u8ScsiSts; RTGCPHYS GCPhysAddrCCB = pReq->GCPhysAddrCCB; CCBU CCBGuest; memcpy(&CCBGuest, &pReq->CCBGuest, sizeof(CCBU)); pTgtDev->pDrvMediaEx->pfnIoReqFree(pTgtDev->pDrvMediaEx, pReq->hIoReq); if (u8ScsiSts == SCSI_STATUS_OK) buslogicR3SendIncomingMailbox(pDevIns, pThis, GCPhysAddrCCB, &CCBGuest, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_CMD_COMPLETED, BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_OPERATION_GOOD, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_WITHOUT_ERROR); else if (u8ScsiSts == SCSI_STATUS_CHECK_CONDITION) buslogicR3SendIncomingMailbox(pDevIns, pThis, GCPhysAddrCCB, &CCBGuest, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_CMD_COMPLETED, BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_CHECK_CONDITION, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_WITH_ERROR); else AssertMsgFailed(("invalid completion status %u\n", u8ScsiSts)); #ifdef LOG_ENABLED buslogicR3DumpCCBInfo(&CCBGuest, fIs24Bit); #endif } if (pTgtDev->cOutstandingRequests == 0 && pThisCC->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pDevIns); return VINF_SUCCESS; } /** * @interface_method_impl{PDMIMEDIAPORT,pfnQueryDeviceLocation} */ static DECLCALLBACK(int) buslogicR3QueryDeviceLocation(PPDMIMEDIAPORT pInterface, const char **ppcszController, uint32_t *piInstance, uint32_t *piLUN) { PBUSLOGICDEVICE pTgtDev = RT_FROM_MEMBER(pInterface, BUSLOGICDEVICE, IMediaPort); PPDMDEVINS pDevIns = pTgtDev->pDevIns; AssertPtrReturn(ppcszController, VERR_INVALID_POINTER); AssertPtrReturn(piInstance, VERR_INVALID_POINTER); AssertPtrReturn(piLUN, VERR_INVALID_POINTER); *ppcszController = pDevIns->pReg->szName; *piInstance = pDevIns->iInstance; *piLUN = pTgtDev->iLUN; return VINF_SUCCESS; } static DECLCALLBACK(size_t) buslogicR3CopySgToGuestBios(PCRTSGBUF pSgBuf, const void *pvSrc, size_t cbSrc, void *pvUser) { PBUSLOGICCOPYARGS pArgs = (PBUSLOGICCOPYARGS)pvUser; size_t cbThisCopy = RT_MIN(cbSrc, pArgs->pCmd->cbData - pArgs->cbCopied); RT_NOREF(pSgBuf); blPhysWriteUser(pArgs->pDevIns, pArgs->pThis, pArgs->pCmd->u32PhysAddrData + pArgs->cbCopied, pvSrc, cbThisCopy); pArgs->cbCopied += cbThisCopy; return cbThisCopy; } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqCopyFromBuf} */ static DECLCALLBACK(int) buslogicR3IoReqCopyFromBuf(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, uint32_t offDst, PRTSGBUF pSgBuf, size_t cbCopy) { PBUSLOGICDEVICE pTgtDev = RT_FROM_MEMBER(pInterface, BUSLOGICDEVICE, IMediaExPort); PPDMDEVINS pDevIns = pTgtDev->pDevIns; PBUSLOGICREQ pReq = (PBUSLOGICREQ)pvIoReqAlloc; RT_NOREF(hIoReq); size_t cbCopied = 0; if (RT_LIKELY(!pReq->fBIOS)) cbCopied = buslogicR3CopySgBufToGuest(pDevIns, PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC), pReq, pSgBuf, offDst, cbCopy); else { BUSLOGICCOPYARGS Args; PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PESCMD pCmd = (PESCMD)pThis->aCommandBuffer; Args.pCmd = pCmd; Args.pThis = pThis; Args.pDevIns = pDevIns; Args.cbCopied = 0; cbCopied = RTSgBufCopyToFn(pSgBuf, RT_MIN(pCmd->cbData, cbCopy), buslogicR3CopySgToGuestBios, &Args); } return cbCopied == cbCopy ? VINF_SUCCESS : VERR_PDM_MEDIAEX_IOBUF_OVERFLOW; } static DECLCALLBACK(size_t) buslogicR3CopySgFromGuestBios(PCRTSGBUF pSgBuf, void *pvDst, size_t cbDst, void *pvUser) { PBUSLOGICCOPYARGS pArgs = (PBUSLOGICCOPYARGS)pvUser; size_t cbThisCopy = RT_MIN(cbDst, pArgs->pCmd->cbData - pArgs->cbCopied); RT_NOREF(pSgBuf); blPhysReadUser(pArgs->pDevIns, pArgs->pThis, pArgs->pCmd->u32PhysAddrData + pArgs->cbCopied, pvDst, cbThisCopy); pArgs->cbCopied += cbThisCopy; return cbThisCopy; } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqCopyToBuf} */ static DECLCALLBACK(int) buslogicR3IoReqCopyToBuf(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, uint32_t offSrc, PRTSGBUF pSgBuf, size_t cbCopy) { RT_NOREF(hIoReq); PBUSLOGICDEVICE pTgtDev = RT_FROM_MEMBER(pInterface, BUSLOGICDEVICE, IMediaExPort); PPDMDEVINS pDevIns = pTgtDev->pDevIns; PBUSLOGICREQ pReq = (PBUSLOGICREQ)pvIoReqAlloc; size_t cbCopied = 0; if (RT_LIKELY(!pReq->fBIOS)) cbCopied = buslogicR3CopySgBufFromGuest(pDevIns, PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC), pReq, pSgBuf, offSrc, cbCopy); else { BUSLOGICCOPYARGS Args; PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PESCMD pCmd = (PESCMD)pThis->aCommandBuffer; Args.pCmd = pCmd; Args.pThis = pThis; Args.pDevIns = pDevIns; Args.cbCopied = 0; cbCopied = RTSgBufCopyFromFn(pSgBuf, RT_MIN(pCmd->cbData, cbCopy), buslogicR3CopySgFromGuestBios, &Args); } return cbCopied == cbCopy ? VINF_SUCCESS : VERR_PDM_MEDIAEX_IOBUF_UNDERRUN; } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqCompleteNotify} */ static DECLCALLBACK(int) buslogicR3IoReqCompleteNotify(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, int rcReq) { RT_NOREF(hIoReq); PBUSLOGICDEVICE pTgtDev = RT_FROM_MEMBER(pInterface, BUSLOGICDEVICE, IMediaExPort); PPDMDEVINS pDevIns = pTgtDev->pDevIns; buslogicR3ReqComplete(pDevIns, PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC), PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC), (PBUSLOGICREQ)pvIoReqAlloc, rcReq); return VINF_SUCCESS; } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnIoReqStateChanged} */ static DECLCALLBACK(void) buslogicR3IoReqStateChanged(PPDMIMEDIAEXPORT pInterface, PDMMEDIAEXIOREQ hIoReq, void *pvIoReqAlloc, PDMMEDIAEXIOREQSTATE enmState) { RT_NOREF(hIoReq, pvIoReqAlloc, enmState); PBUSLOGICDEVICE pTgtDev = RT_FROM_MEMBER(pInterface, BUSLOGICDEVICE, IMediaExPort); switch (enmState) { case PDMMEDIAEXIOREQSTATE_SUSPENDED: { PPDMDEVINS pDevIns = pTgtDev->pDevIns; PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); /* Make sure the request is not accounted for so the VM can suspend successfully. */ uint32_t cTasksActive = ASMAtomicDecU32(&pTgtDev->cOutstandingRequests); if (!cTasksActive && pThisCC->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pDevIns); break; } case PDMMEDIAEXIOREQSTATE_ACTIVE: /* Make sure the request is accounted for so the VM suspends only when the request is complete. */ ASMAtomicIncU32(&pTgtDev->cOutstandingRequests); break; default: AssertMsgFailed(("Invalid request state given %u\n", enmState)); } } /** * @interface_method_impl{PDMIMEDIAEXPORT,pfnMediumEjected} */ static DECLCALLBACK(void) buslogicR3MediumEjected(PPDMIMEDIAEXPORT pInterface) { PBUSLOGICDEVICE pTgtDev = RT_FROM_MEMBER(pInterface, BUSLOGICDEVICE, IMediaExPort); PPDMDEVINS pDevIns = pTgtDev->pDevIns; PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); if (pThisCC->pMediaNotify) { int rc = VMR3ReqCallNoWait(PDMDevHlpGetVM(pDevIns), VMCPUID_ANY, (PFNRT)pThisCC->pMediaNotify->pfnEjected, 2, pThisCC->pMediaNotify, pTgtDev->iLUN); AssertRC(rc); } } static int buslogicR3DeviceSCSIRequestSetup(PPDMDEVINS pDevIns, PBUSLOGIC pThis, PBUSLOGICCC pThisCC, RTGCPHYS GCPhysAddrCCB) { int rc = VINF_SUCCESS; uint8_t uTargetIdCCB; CCBU CCBGuest; /* Fetch the CCB from guest memory. */ /** @todo How much do we really have to read? */ blPhysReadMeta(pDevIns, pThis, GCPhysAddrCCB, &CCBGuest, sizeof(CCB32)); uTargetIdCCB = pThis->fMbxIs24Bit ? CCBGuest.o.uTargetId : CCBGuest.n.uTargetId; if (RT_LIKELY(uTargetIdCCB < RT_ELEMENTS(pThisCC->aDeviceStates))) { PBUSLOGICDEVICE pTgtDev = &pThisCC->aDeviceStates[uTargetIdCCB]; #ifdef LOG_ENABLED buslogicR3DumpCCBInfo(&CCBGuest, pThis->fMbxIs24Bit); #endif /* Check if device is present on bus. If not return error immediately and don't process this further. */ if (RT_LIKELY(pTgtDev->fPresent)) { PDMMEDIAEXIOREQ hIoReq; PBUSLOGICREQ pReq; rc = pTgtDev->pDrvMediaEx->pfnIoReqAlloc(pTgtDev->pDrvMediaEx, &hIoReq, (void **)&pReq, GCPhysAddrCCB, PDMIMEDIAEX_F_SUSPEND_ON_RECOVERABLE_ERR); if (RT_SUCCESS(rc)) { pReq->pTargetDevice = pTgtDev; pReq->GCPhysAddrCCB = GCPhysAddrCCB; pReq->fBIOS = false; pReq->hIoReq = hIoReq; pReq->fIs24Bit = pThis->fMbxIs24Bit; /* Make a copy of the CCB */ memcpy(&pReq->CCBGuest, &CCBGuest, sizeof(CCBGuest)); /* Alloc required buffers. */ rc = buslogicR3SenseBufferAlloc(pReq); AssertMsgRC(rc, ("Mapping sense buffer failed rc=%Rrc\n", rc)); size_t cbBuf = 0; rc = buslogicR3QueryDataBufferSize(pDevIns, &pReq->CCBGuest, pReq->fIs24Bit, &cbBuf); AssertRC(rc); uint32_t uLun = pReq->fIs24Bit ? pReq->CCBGuest.o.uLogicalUnit : pReq->CCBGuest.n.uLogicalUnit; PDMMEDIAEXIOREQSCSITXDIR enmXferDir = PDMMEDIAEXIOREQSCSITXDIR_UNKNOWN; size_t cbSense = buslogicR3ConvertSenseBufferLength(CCBGuest.c.cbSenseData); if (CCBGuest.c.uDataDirection == BUSLOGIC_CCB_DIRECTION_NO_DATA) enmXferDir = PDMMEDIAEXIOREQSCSITXDIR_NONE; else if (CCBGuest.c.uDataDirection == BUSLOGIC_CCB_DIRECTION_OUT) enmXferDir = PDMMEDIAEXIOREQSCSITXDIR_TO_DEVICE; else if (CCBGuest.c.uDataDirection == BUSLOGIC_CCB_DIRECTION_IN) enmXferDir = PDMMEDIAEXIOREQSCSITXDIR_FROM_DEVICE; ASMAtomicIncU32(&pTgtDev->cOutstandingRequests); rc = pTgtDev->pDrvMediaEx->pfnIoReqSendScsiCmd(pTgtDev->pDrvMediaEx, pReq->hIoReq, uLun, &pReq->CCBGuest.c.abCDB[0], pReq->CCBGuest.c.cbCDB, enmXferDir, NULL, cbBuf, pReq->pbSenseBuffer, cbSense, NULL, &pReq->u8ScsiSts, 30 * RT_MS_1SEC); if (rc != VINF_PDM_MEDIAEX_IOREQ_IN_PROGRESS) buslogicR3ReqComplete(pDevIns, pThis, pThisCC, pReq, rc); } else buslogicR3SendIncomingMailbox(pDevIns, pThis, GCPhysAddrCCB, &CCBGuest, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_SCSI_SELECTION_TIMEOUT, BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_OPERATION_GOOD, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_WITH_ERROR); } else buslogicR3SendIncomingMailbox(pDevIns, pThis, GCPhysAddrCCB, &CCBGuest, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_SCSI_SELECTION_TIMEOUT, BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_OPERATION_GOOD, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_WITH_ERROR); } else buslogicR3SendIncomingMailbox(pDevIns, pThis, GCPhysAddrCCB, &CCBGuest, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_INVALID_COMMAND_PARAMETER, BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_OPERATION_GOOD, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_WITH_ERROR); return rc; } static int buslogicR3DeviceSCSIRequestAbort(PPDMDEVINS pDevIns, PBUSLOGIC pThis, RTGCPHYS GCPhysAddrCCB) { uint8_t uTargetIdCCB; CCBU CCBGuest; blPhysReadMeta(pDevIns, pThis, GCPhysAddrCCB, &CCBGuest, sizeof(CCB32)); uTargetIdCCB = pThis->fMbxIs24Bit ? CCBGuest.o.uTargetId : CCBGuest.n.uTargetId; if (RT_LIKELY(uTargetIdCCB < RT_ELEMENTS(pThis->afDevicePresent))) buslogicR3SendIncomingMailbox(pDevIns, pThis, GCPhysAddrCCB, &CCBGuest, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_ABORT_QUEUE_GENERATED, BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_OPERATION_GOOD, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_ABORTED_NOT_FOUND); else buslogicR3SendIncomingMailbox(pDevIns, pThis, GCPhysAddrCCB, &CCBGuest, BUSLOGIC_MAILBOX_INCOMING_ADAPTER_STATUS_INVALID_COMMAND_PARAMETER, BUSLOGIC_MAILBOX_INCOMING_DEVICE_STATUS_OPERATION_GOOD, BUSLOGIC_MAILBOX_INCOMING_COMPLETION_WITH_ERROR); return VINF_SUCCESS; } /** * Read a mailbox from guest memory. Convert 24-bit mailboxes to * 32-bit format. * * @returns Mailbox guest physical address. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param pMbx Pointer to the mailbox to read into. */ static RTGCPHYS buslogicR3ReadOutgoingMailbox(PPDMDEVINS pDevIns, PBUSLOGIC pThis, PMailbox32 pMbx) { RTGCPHYS GCMailbox; if (pThis->fMbxIs24Bit) { Mailbox24 Mbx24; GCMailbox = pThis->GCPhysAddrMailboxOutgoingBase + (pThis->uMailboxOutgoingPositionCurrent * sizeof(Mailbox24)); blPhysReadMeta(pDevIns, pThis, GCMailbox, &Mbx24, sizeof(Mailbox24)); pMbx->u32PhysAddrCCB = ADDR_TO_U32(Mbx24.aPhysAddrCCB); pMbx->u.out.uActionCode = Mbx24.uCmdState; } else { GCMailbox = pThis->GCPhysAddrMailboxOutgoingBase + (pThis->uMailboxOutgoingPositionCurrent * sizeof(Mailbox32)); blPhysReadMeta(pDevIns, pThis, GCMailbox, pMbx, sizeof(Mailbox32)); } return GCMailbox; } /** * Read mailbox from the guest and execute command. * * @returns VBox status code. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param pThisCC Pointer to the ring-3 BusLogic instance data. */ static int buslogicR3ProcessMailboxNext(PPDMDEVINS pDevIns, PBUSLOGIC pThis, PBUSLOGICCC pThisCC) { RTGCPHYS GCPhysAddrMailboxCurrent; Mailbox32 MailboxGuest; int rc = VINF_SUCCESS; if (!pThis->fStrictRoundRobinMode) { /* Search for a filled mailbox - stop if we have scanned all mailboxes. */ uint8_t uMailboxPosCur = pThis->uMailboxOutgoingPositionCurrent; do { /* Fetch mailbox from guest memory. */ GCPhysAddrMailboxCurrent = buslogicR3ReadOutgoingMailbox(pDevIns, pThis, &MailboxGuest); /* Check the next mailbox. */ buslogicR3OutgoingMailboxAdvance(pThis); } while ( MailboxGuest.u.out.uActionCode == BUSLOGIC_MAILBOX_OUTGOING_ACTION_FREE && uMailboxPosCur != pThis->uMailboxOutgoingPositionCurrent); } else { /* Fetch mailbox from guest memory. */ GCPhysAddrMailboxCurrent = buslogicR3ReadOutgoingMailbox(pDevIns, pThis, &MailboxGuest); } /* * Check if the mailbox is actually loaded. * It might be possible that the guest notified us without * a loaded mailbox. Do nothing in that case but leave a * log entry. */ if (MailboxGuest.u.out.uActionCode == BUSLOGIC_MAILBOX_OUTGOING_ACTION_FREE) { Log(("No loaded mailbox left\n")); return VERR_NO_DATA; } LogFlow(("Got loaded mailbox at slot %u, CCB phys %RGp\n", pThis->uMailboxOutgoingPositionCurrent, (RTGCPHYS)MailboxGuest.u32PhysAddrCCB)); #ifdef LOG_ENABLED buslogicR3DumpMailboxInfo(&MailboxGuest, true); #endif /* We got the mailbox, mark it as free in the guest. */ uint8_t uActionCode = BUSLOGIC_MAILBOX_OUTGOING_ACTION_FREE; unsigned uCodeOffs = pThis->fMbxIs24Bit ? RT_OFFSETOF(Mailbox24, uCmdState) : RT_OFFSETOF(Mailbox32, u.out.uActionCode); blPhysWriteMeta(pDevIns, pThis, GCPhysAddrMailboxCurrent + uCodeOffs, &uActionCode, sizeof(uActionCode)); if (MailboxGuest.u.out.uActionCode == BUSLOGIC_MAILBOX_OUTGOING_ACTION_START_COMMAND) rc = buslogicR3DeviceSCSIRequestSetup(pDevIns, pThis, pThisCC, (RTGCPHYS)MailboxGuest.u32PhysAddrCCB); else if (MailboxGuest.u.out.uActionCode == BUSLOGIC_MAILBOX_OUTGOING_ACTION_ABORT_COMMAND) { LogFlow(("Aborting mailbox\n")); rc = buslogicR3DeviceSCSIRequestAbort(pDevIns, pThis, (RTGCPHYS)MailboxGuest.u32PhysAddrCCB); } else AssertMsgFailed(("Invalid outgoing mailbox action code %u\n", MailboxGuest.u.out.uActionCode)); AssertRC(rc); /* Advance to the next mailbox. */ if (pThis->fStrictRoundRobinMode) buslogicR3OutgoingMailboxAdvance(pThis); return rc; } /** * Processes a SCSI request issued by the BIOS with the BUSLOGICCOMMAND_EXECUTE_SCSI_COMMAND command. * * @returns nothing. * @param pDevIns The device instance. * @param pThis Pointer to the shared BusLogic instance data. * @param pThisCC Pointer to the ring-3 BusLogic instance data. */ static void buslogicR3ProcessBiosReq(PPDMDEVINS pDevIns, PBUSLOGIC pThis, PBUSLOGICCC pThisCC) { PESCMD pCmd = (PESCMD)pThis->aCommandBuffer; if (RT_LIKELY( pCmd->uTargetId < RT_ELEMENTS(pThisCC->aDeviceStates) && pCmd->cbCDB <= 16)) { PBUSLOGICDEVICE pTgtDev = &pThisCC->aDeviceStates[pCmd->uTargetId]; /* Check if device is present on bus. If not return error immediately and don't process this further. */ if (RT_LIKELY(pTgtDev->fPresent)) { PDMMEDIAEXIOREQ hIoReq; PBUSLOGICREQ pReq; int rc = pTgtDev->pDrvMediaEx->pfnIoReqAlloc(pTgtDev->pDrvMediaEx, &hIoReq, (void **)&pReq, 0, PDMIMEDIAEX_F_SUSPEND_ON_RECOVERABLE_ERR); if (RT_SUCCESS(rc)) { pReq->pTargetDevice = pTgtDev; pReq->GCPhysAddrCCB = 0; pReq->fBIOS = true; pReq->hIoReq = hIoReq; pReq->fIs24Bit = false; uint32_t uLun = pCmd->uLogicalUnit; PDMMEDIAEXIOREQSCSITXDIR enmXferDir = PDMMEDIAEXIOREQSCSITXDIR_UNKNOWN; if (pCmd->uDataDirection == 2) enmXferDir = PDMMEDIAEXIOREQSCSITXDIR_TO_DEVICE; else if (pCmd->uDataDirection == 1) enmXferDir = PDMMEDIAEXIOREQSCSITXDIR_FROM_DEVICE; ASMAtomicIncU32(&pTgtDev->cOutstandingRequests); rc = pTgtDev->pDrvMediaEx->pfnIoReqSendScsiCmd(pTgtDev->pDrvMediaEx, pReq->hIoReq, uLun, &pCmd->abCDB[0], pCmd->cbCDB, enmXferDir, NULL, pCmd->cbData, NULL, 0 /*cbSense*/, NULL, &pReq->u8ScsiSts, 30 * RT_MS_1SEC); if (rc != VINF_PDM_MEDIAEX_IOREQ_IN_PROGRESS) buslogicR3ReqComplete(pDevIns, pThis, pThisCC, pReq, rc); } else buslogicR3ReqCompleteBios(pThis, SCSI_STATUS_CHECK_CONDITION); } else buslogicR3ReqCompleteBios(pThis, SCSI_STATUS_CHECK_CONDITION); } else buslogicR3ReqCompleteBios(pThis, SCSI_STATUS_CHECK_CONDITION); } /** @callback_method_impl{FNSSMDEVLIVEEXEC} */ static DECLCALLBACK(int) buslogicR3LiveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uPass) { PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; RT_NOREF(uPass); /* Save the device config. */ for (unsigned i = 0; i < RT_ELEMENTS(pThisCC->aDeviceStates); i++) pHlp->pfnSSMPutBool(pSSM, pThisCC->aDeviceStates[i].fPresent); return VINF_SSM_DONT_CALL_AGAIN; } /** @callback_method_impl{FNSSMDEVSAVEEXEC} */ static DECLCALLBACK(int) buslogicR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; uint32_t cReqsSuspended = 0; /* Every device first. */ for (unsigned i = 0; i < RT_ELEMENTS(pThisCC->aDeviceStates); i++) { PBUSLOGICDEVICE pDevice = &pThisCC->aDeviceStates[i]; AssertMsg(!pDevice->cOutstandingRequests, ("There are still outstanding requests on this device\n")); pHlp->pfnSSMPutBool(pSSM, pDevice->fPresent); pHlp->pfnSSMPutU32(pSSM, pDevice->cOutstandingRequests); if (pDevice->fPresent) cReqsSuspended += pDevice->pDrvMediaEx->pfnIoReqGetSuspendedCount(pDevice->pDrvMediaEx); } /* Now the main device state. */ pHlp->pfnSSMPutU8 (pSSM, pThis->regStatus); pHlp->pfnSSMPutU8 (pSSM, pThis->regInterrupt); pHlp->pfnSSMPutU8 (pSSM, pThis->regGeometry); pHlp->pfnSSMPutMem (pSSM, &pThis->LocalRam, sizeof(pThis->LocalRam)); pHlp->pfnSSMPutU8 (pSSM, pThis->uOperationCode); pHlp->pfnSSMPutMem (pSSM, &pThis->aCommandBuffer, sizeof(pThis->aCommandBuffer)); pHlp->pfnSSMPutU8 (pSSM, pThis->iParameter); pHlp->pfnSSMPutU8 (pSSM, pThis->cbCommandParametersLeft); pHlp->pfnSSMPutBool (pSSM, pThis->fUseLocalRam); pHlp->pfnSSMPutMem (pSSM, pThis->aReplyBuffer, sizeof(pThis->aReplyBuffer)); pHlp->pfnSSMPutU8 (pSSM, pThis->iReply); pHlp->pfnSSMPutU8 (pSSM, pThis->cbReplyParametersLeft); pHlp->pfnSSMPutBool (pSSM, pThis->fIRQEnabled); pHlp->pfnSSMPutU8 (pSSM, pThis->uISABaseCode); pHlp->pfnSSMPutU32 (pSSM, pThis->cMailbox); pHlp->pfnSSMPutBool (pSSM, pThis->fMbxIs24Bit); pHlp->pfnSSMPutGCPhys(pSSM, pThis->GCPhysAddrMailboxOutgoingBase); pHlp->pfnSSMPutU32 (pSSM, pThis->uMailboxOutgoingPositionCurrent); pHlp->pfnSSMPutU32 (pSSM, pThis->cMailboxesReady); pHlp->pfnSSMPutBool (pSSM, pThis->fNotificationSent); pHlp->pfnSSMPutGCPhys(pSSM, pThis->GCPhysAddrMailboxIncomingBase); pHlp->pfnSSMPutU32 (pSSM, pThis->uMailboxIncomingPositionCurrent); pHlp->pfnSSMPutBool (pSSM, pThis->fStrictRoundRobinMode); pHlp->pfnSSMPutBool (pSSM, pThis->fExtendedLunCCBFormat); pHlp->pfnSSMPutU32(pSSM, cReqsSuspended); /* Save the physical CCB address of all suspended requests. */ for (unsigned i = 0; i < RT_ELEMENTS(pThisCC->aDeviceStates) && cReqsSuspended; i++) { PBUSLOGICDEVICE pDevice = &pThisCC->aDeviceStates[i]; if (pDevice->fPresent) { uint32_t cThisReqsSuspended = pDevice->pDrvMediaEx->pfnIoReqGetSuspendedCount(pDevice->pDrvMediaEx); cReqsSuspended -= cThisReqsSuspended; if (cThisReqsSuspended) { PDMMEDIAEXIOREQ hIoReq; PBUSLOGICREQ pReq; int rc = pDevice->pDrvMediaEx->pfnIoReqQuerySuspendedStart(pDevice->pDrvMediaEx, &hIoReq, (void **)&pReq); AssertRCBreak(rc); for (;;) { pHlp->pfnSSMPutU32(pSSM, (uint32_t)pReq->GCPhysAddrCCB); cThisReqsSuspended--; if (!cThisReqsSuspended) break; rc = pDevice->pDrvMediaEx->pfnIoReqQuerySuspendedNext(pDevice->pDrvMediaEx, hIoReq, &hIoReq, (void **)&pReq); AssertRCBreak(rc); } } } } return pHlp->pfnSSMPutU32(pSSM, UINT32_MAX); } /** @callback_method_impl{FNSSMDEVLOADDONE} */ static DECLCALLBACK(int) buslogicR3LoadDone(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); RT_NOREF(pSSM); buslogicR3RegisterISARange(pDevIns, pThis, pThis->uISABaseCode); /* Kick of any requests we might need to redo. */ if (pThisCC->cReqsRedo) { for (unsigned i = 0; i < pThisCC->cReqsRedo; i++) { int rc = buslogicR3DeviceSCSIRequestSetup(pDevIns, pThis, pThisCC, pThisCC->paGCPhysAddrCCBRedo[i]); AssertRC(rc); } RTMemFree(pThisCC->paGCPhysAddrCCBRedo); pThisCC->paGCPhysAddrCCBRedo = NULL; pThisCC->cReqsRedo = 0; } return VINF_SUCCESS; } /** @callback_method_impl{FNSSMDEVLOADEXEC} */ static DECLCALLBACK(int) buslogicR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; int rc = VINF_SUCCESS; /* We support saved states only from this and older versions. */ if (uVersion > BUSLOGIC_SAVED_STATE_MINOR_VERSION) return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; /* Every device first. */ for (unsigned i = 0; i < RT_ELEMENTS(pThisCC->aDeviceStates); i++) { PBUSLOGICDEVICE pDevice = &pThisCC->aDeviceStates[i]; AssertMsg(!pDevice->cOutstandingRequests, ("There are still outstanding requests on this device\n")); bool fPresent; rc = pHlp->pfnSSMGetBool(pSSM, &fPresent); AssertRCReturn(rc, rc); if (pDevice->fPresent != fPresent) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("Target %u config mismatch: config=%RTbool state=%RTbool"), i, pDevice->fPresent, fPresent); if (uPass == SSM_PASS_FINAL) pHlp->pfnSSMGetU32V(pSSM, &pDevice->cOutstandingRequests); } if (uPass != SSM_PASS_FINAL) return VINF_SUCCESS; /* Now the main device state. */ pHlp->pfnSSMGetU8V (pSSM, &pThis->regStatus); pHlp->pfnSSMGetU8V (pSSM, &pThis->regInterrupt); pHlp->pfnSSMGetU8V (pSSM, &pThis->regGeometry); pHlp->pfnSSMGetMem (pSSM, &pThis->LocalRam, sizeof(pThis->LocalRam)); pHlp->pfnSSMGetU8 (pSSM, &pThis->uOperationCode); if (uVersion > BUSLOGIC_SAVED_STATE_MINOR_PRE_CMDBUF_RESIZE) pHlp->pfnSSMGetMem(pSSM, &pThis->aCommandBuffer, sizeof(pThis->aCommandBuffer)); else pHlp->pfnSSMGetMem(pSSM, &pThis->aCommandBuffer, BUSLOGIC_COMMAND_SIZE_OLD); pHlp->pfnSSMGetU8 (pSSM, &pThis->iParameter); pHlp->pfnSSMGetU8 (pSSM, &pThis->cbCommandParametersLeft); pHlp->pfnSSMGetBool (pSSM, &pThis->fUseLocalRam); pHlp->pfnSSMGetMem (pSSM, pThis->aReplyBuffer, sizeof(pThis->aReplyBuffer)); pHlp->pfnSSMGetU8 (pSSM, &pThis->iReply); pHlp->pfnSSMGetU8 (pSSM, &pThis->cbReplyParametersLeft); pHlp->pfnSSMGetBool (pSSM, &pThis->fIRQEnabled); pHlp->pfnSSMGetU8 (pSSM, &pThis->uISABaseCode); pHlp->pfnSSMGetU32 (pSSM, &pThis->cMailbox); if (uVersion > BUSLOGIC_SAVED_STATE_MINOR_PRE_24BIT_MBOX) pHlp->pfnSSMGetBool(pSSM, &pThis->fMbxIs24Bit); pHlp->pfnSSMGetGCPhys(pSSM, &pThis->GCPhysAddrMailboxOutgoingBase); pHlp->pfnSSMGetU32 (pSSM, &pThis->uMailboxOutgoingPositionCurrent); pHlp->pfnSSMGetU32V (pSSM, &pThis->cMailboxesReady); pHlp->pfnSSMGetBoolV (pSSM, &pThis->fNotificationSent); pHlp->pfnSSMGetGCPhys(pSSM, &pThis->GCPhysAddrMailboxIncomingBase); pHlp->pfnSSMGetU32 (pSSM, &pThis->uMailboxIncomingPositionCurrent); pHlp->pfnSSMGetBool (pSSM, &pThis->fStrictRoundRobinMode); pHlp->pfnSSMGetBool (pSSM, &pThis->fExtendedLunCCBFormat); if (uVersion <= BUSLOGIC_SAVED_STATE_MINOR_PRE_VBOXSCSI_REMOVAL) { rc = vboxscsiR3LoadExecLegacy(pDevIns->pHlpR3, pSSM); if (RT_FAILURE(rc)) { LogRel(("BusLogic: Failed to restore BIOS state: %Rrc.\n", rc)); return PDMDEV_SET_ERROR(pDevIns, rc, N_("BusLogic: Failed to restore BIOS state\n")); } } if (uVersion > BUSLOGIC_SAVED_STATE_MINOR_PRE_ERROR_HANDLING) { /* Check if there are pending tasks saved. */ uint32_t cTasks = 0; pHlp->pfnSSMGetU32(pSSM, &cTasks); if (cTasks) { pThisCC->paGCPhysAddrCCBRedo = (PRTGCPHYS)RTMemAllocZ(cTasks * sizeof(RTGCPHYS)); if (RT_LIKELY(pThisCC->paGCPhysAddrCCBRedo)) { pThisCC->cReqsRedo = cTasks; for (uint32_t i = 0; i < cTasks; i++) { uint32_t u32PhysAddrCCB; rc = pHlp->pfnSSMGetU32(pSSM, &u32PhysAddrCCB); AssertRCBreak(rc); pThisCC->paGCPhysAddrCCBRedo[i] = u32PhysAddrCCB; } } else rc = VERR_NO_MEMORY; } } if (RT_SUCCESS(rc)) { uint32_t u32; rc = pHlp->pfnSSMGetU32(pSSM, &u32); if (RT_SUCCESS(rc)) AssertMsgReturn(u32 == UINT32_MAX, ("%#x\n", u32), VERR_SSM_DATA_UNIT_FORMAT_CHANGED); } return rc; } /** * Gets the pointer to the status LED of a device - called from the SCSI driver. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit which status LED we desire. Always 0 here as the driver * doesn't know about other LUN's. * @param ppLed Where to store the LED pointer. */ static DECLCALLBACK(int) buslogicR3DeviceQueryStatusLed(PPDMILEDPORTS pInterface, unsigned iLUN, PPDMLED *ppLed) { PBUSLOGICDEVICE pDevice = RT_FROM_MEMBER(pInterface, BUSLOGICDEVICE, ILed); if (iLUN == 0) { *ppLed = &pDevice->Led; Assert((*ppLed)->u32Magic == PDMLED_MAGIC); return VINF_SUCCESS; } return VERR_PDM_LUN_NOT_FOUND; } /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) buslogicR3DeviceQueryInterface(PPDMIBASE pInterface, const char *pszIID) { PBUSLOGICDEVICE pDevice = RT_FROM_MEMBER(pInterface, BUSLOGICDEVICE, IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pDevice->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMEDIAPORT, &pDevice->IMediaPort); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMEDIAEXPORT, &pDevice->IMediaExPort); PDMIBASE_RETURN_INTERFACE(pszIID, PDMILEDPORTS, &pDevice->ILed); return NULL; } /** * Gets the pointer to the status LED of a unit. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit which status LED we desire. * @param ppLed Where to store the LED pointer. */ static DECLCALLBACK(int) buslogicR3StatusQueryStatusLed(PPDMILEDPORTS pInterface, unsigned iLUN, PPDMLED *ppLed) { PBUSLOGICCC pThisCC = RT_FROM_MEMBER(pInterface, BUSLOGICCC, ILeds); if (iLUN < BUSLOGIC_MAX_DEVICES) { *ppLed = &pThisCC->aDeviceStates[iLUN].Led; Assert((*ppLed)->u32Magic == PDMLED_MAGIC); return VINF_SUCCESS; } return VERR_PDM_LUN_NOT_FOUND; } /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) buslogicR3StatusQueryInterface(PPDMIBASE pInterface, const char *pszIID) { PBUSLOGICCC pThisCC = RT_FROM_MEMBER(pInterface, BUSLOGICCC, IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThisCC->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMILEDPORTS, &pThisCC->ILeds); return NULL; } /** * @callback_method_impl{FNPDMTHREADWAKEUPDEV} */ static DECLCALLBACK(int) buslogicR3Worker(PPDMDEVINS pDevIns, PPDMTHREAD pThread) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); if (pThread->enmState == PDMTHREADSTATE_INITIALIZING) return VINF_SUCCESS; while (pThread->enmState == PDMTHREADSTATE_RUNNING) { int rc; ASMAtomicWriteBool(&pThisCC->fWrkThreadSleeping, true); bool fNotificationSent = ASMAtomicXchgBool(&pThis->fNotificationSent, false); if (!fNotificationSent) { Assert(ASMAtomicReadBool(&pThisCC->fWrkThreadSleeping)); rc = PDMDevHlpSUPSemEventWaitNoResume(pDevIns, pThis->hEvtProcess, RT_INDEFINITE_WAIT); AssertLogRelMsgReturn(RT_SUCCESS(rc) || rc == VERR_INTERRUPTED, ("%Rrc\n", rc), rc); if (RT_UNLIKELY(pThread->enmState != PDMTHREADSTATE_RUNNING)) break; LogFlowFunc(("Woken up with rc=%Rrc\n", rc)); ASMAtomicWriteBool(&pThis->fNotificationSent, false); } ASMAtomicWriteBool(&pThisCC->fWrkThreadSleeping, false); if (ASMAtomicXchgBool(&pThis->fBiosReqPending, false)) buslogicR3ProcessBiosReq(pDevIns, pThis, pThisCC); if (ASMAtomicXchgU32(&pThis->cMailboxesReady, 0)) { /* Process mailboxes. */ do { rc = buslogicR3ProcessMailboxNext(pDevIns, pThis, pThisCC); AssertMsg(RT_SUCCESS(rc) || rc == VERR_NO_DATA, ("Processing mailbox failed rc=%Rrc\n", rc)); } while (RT_SUCCESS(rc)); } } /* While running */ return VINF_SUCCESS; } /** * @callback_method_impl{FNPDMTHREADWAKEUPDEV} */ static DECLCALLBACK(int) buslogicR3WorkerWakeUp(PPDMDEVINS pDevIns, PPDMTHREAD pThread) { RT_NOREF(pThread); PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); return PDMDevHlpSUPSemEventSignal(pDevIns, pThis->hEvtProcess); } /** * BusLogic debugger info callback. * * @param pDevIns The device instance. * @param pHlp The output helpers. * @param pszArgs The arguments. */ static DECLCALLBACK(void) buslogicR3Info(PPDMDEVINS pDevIns, PCDBGFINFOHLP pHlp, const char *pszArgs) { static const char *apszModels[] = { "BusLogic BT-958D", "BusLogic BT-545C", "Adaptec AHA-1540B" }; PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); unsigned i; bool fVerbose = false; /* Parse arguments. */ if (pszArgs) fVerbose = strstr(pszArgs, "verbose") != NULL; /* Show basic information. */ pHlp->pfnPrintf(pHlp, "%s#%d: %s ", pDevIns->pReg->szName, pDevIns->iInstance, pThis->uDevType >= RT_ELEMENTS(apszModels) ? "Unknown model" : apszModels[pThis->uDevType]); if (pThis->uIsaIrq) pHlp->pfnPrintf(pHlp, "ISA I/O=%RTiop IRQ=%u ", pThis->IOISABase, pThis->uIsaIrq); else pHlp->pfnPrintf(pHlp, "PCI I/O=%04x ISA I/O=%RTiop MMIO=%RGp IRQ=%u ", PDMDevHlpIoPortGetMappingAddress(pDevIns, pThis->hIoPortsPci), pThis->IOISABase, PDMDevHlpMmioGetMappingAddress(pDevIns, pThis->hMmio), PCIDevGetInterruptLine(pDevIns->apPciDevs[0])); pHlp->pfnPrintf(pHlp, "RC=%RTbool R0=%RTbool\n", pDevIns->fRCEnabled, pDevIns->fR0Enabled); /* Print mailbox state. */ if (pThis->regStatus & BL_STAT_INREQ) pHlp->pfnPrintf(pHlp, "Mailbox not initialized\n"); else pHlp->pfnPrintf(pHlp, "%u-bit mailbox with %u entries at %RGp (%d LUN CCBs)\n", pThis->fMbxIs24Bit ? 24 : 32, pThis->cMailbox, pThis->GCPhysAddrMailboxOutgoingBase, pThis->fMbxIs24Bit ? 8 : pThis->fExtendedLunCCBFormat ? 64 : 8); /* Print register contents. */ pHlp->pfnPrintf(pHlp, "Registers: STAT=%02x INTR=%02x GEOM=%02x\n", pThis->regStatus, pThis->regInterrupt, pThis->regGeometry); /* Print miscellaneous state. */ pHlp->pfnPrintf(pHlp, "HAC interrupts: %s\n", pThis->fIRQEnabled ? "on" : "off"); /* Print the current command, if any. */ if (pThis->uOperationCode != 0xff ) pHlp->pfnPrintf(pHlp, "Current command: %02X\n", pThis->uOperationCode); /* Print the previous command, if any. */ if (pThis->uPrevCmd != 0xff ) pHlp->pfnPrintf(pHlp, "Last completed command: %02X\n", pThis->uPrevCmd); if (fVerbose && (pThis->regStatus & BL_STAT_INREQ) == 0) { RTGCPHYS GCMailbox; /* Dump the mailbox contents. */ if (pThis->fMbxIs24Bit) { Mailbox24 Mbx24; /* Outgoing mailbox, 24-bit format. */ GCMailbox = pThis->GCPhysAddrMailboxOutgoingBase; pHlp->pfnPrintf(pHlp, " Outgoing mailbox entries (24-bit) at %06X:\n", GCMailbox); for (i = 0; i < pThis->cMailbox; ++i) { blPhysReadMeta(pDevIns, pThis, GCMailbox, &Mbx24, sizeof(Mailbox24)); pHlp->pfnPrintf(pHlp, " slot %03d: CCB at %06X action code %02X", i, ADDR_TO_U32(Mbx24.aPhysAddrCCB), Mbx24.uCmdState); pHlp->pfnPrintf(pHlp, "%s\n", pThis->uMailboxOutgoingPositionCurrent == i ? " *" : ""); GCMailbox += sizeof(Mailbox24); } /* Incoming mailbox, 24-bit format. */ GCMailbox = pThis->GCPhysAddrMailboxOutgoingBase + (pThis->cMailbox * sizeof(Mailbox24)); pHlp->pfnPrintf(pHlp, " Incoming mailbox entries (24-bit) at %06X:\n", GCMailbox); for (i = 0; i < pThis->cMailbox; ++i) { blPhysReadMeta(pDevIns, pThis, GCMailbox, &Mbx24, sizeof(Mailbox24)); pHlp->pfnPrintf(pHlp, " slot %03d: CCB at %06X completion code %02X", i, ADDR_TO_U32(Mbx24.aPhysAddrCCB), Mbx24.uCmdState); pHlp->pfnPrintf(pHlp, "%s\n", pThis->uMailboxIncomingPositionCurrent == i ? " *" : ""); GCMailbox += sizeof(Mailbox24); } } else { Mailbox32 Mbx32; /* Outgoing mailbox, 32-bit format. */ GCMailbox = pThis->GCPhysAddrMailboxOutgoingBase; pHlp->pfnPrintf(pHlp, " Outgoing mailbox entries (32-bit) at %08X:\n", (uint32_t)GCMailbox); for (i = 0; i < pThis->cMailbox; ++i) { blPhysReadMeta(pDevIns, pThis, GCMailbox, &Mbx32, sizeof(Mailbox32)); pHlp->pfnPrintf(pHlp, " slot %03d: CCB at %08X action code %02X", i, Mbx32.u32PhysAddrCCB, Mbx32.u.out.uActionCode); pHlp->pfnPrintf(pHlp, "%s\n", pThis->uMailboxOutgoingPositionCurrent == i ? " *" : ""); GCMailbox += sizeof(Mailbox32); } /* Incoming mailbox, 32-bit format. */ GCMailbox = pThis->GCPhysAddrMailboxOutgoingBase + (pThis->cMailbox * sizeof(Mailbox32)); pHlp->pfnPrintf(pHlp, " Incoming mailbox entries (32-bit) at %08X:\n", (uint32_t)GCMailbox); for (i = 0; i < pThis->cMailbox; ++i) { blPhysReadMeta(pDevIns, pThis, GCMailbox, &Mbx32, sizeof(Mailbox32)); pHlp->pfnPrintf(pHlp, " slot %03d: CCB at %08X completion code %02X BTSTAT %02X SDSTAT %02X", i, Mbx32.u32PhysAddrCCB, Mbx32.u.in.uCompletionCode, Mbx32.u.in.uHostAdapterStatus, Mbx32.u.in.uTargetDeviceStatus); pHlp->pfnPrintf(pHlp, "%s\n", pThis->uMailboxIncomingPositionCurrent == i ? " *" : ""); GCMailbox += sizeof(Mailbox32); } } } } /* -=-=-=-=- Helper -=-=-=-=- */ /** * Checks if all asynchronous I/O is finished. * * Used by buslogicR3Reset, buslogicR3Suspend and buslogicR3PowerOff. * * @returns true if quiesced, false if busy. * @param pDevIns The device instance. */ static bool buslogicR3AllAsyncIOIsFinished(PPDMDEVINS pDevIns) { PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); for (uint32_t i = 0; i < RT_ELEMENTS(pThisCC->aDeviceStates); i++) { PBUSLOGICDEVICE pThisDevice = &pThisCC->aDeviceStates[i]; if (pThisDevice->pDrvBase) { if (pThisDevice->cOutstandingRequests != 0) return false; } } return true; } /** * Callback employed by buslogicR3Suspend and buslogicR3PowerOff. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) buslogicR3IsAsyncSuspendOrPowerOffDone(PPDMDEVINS pDevIns) { if (!buslogicR3AllAsyncIOIsFinished(pDevIns)) return false; PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); ASMAtomicWriteBool(&pThisCC->fSignalIdle, false); return true; } /** * Common worker for buslogicR3Suspend and buslogicR3PowerOff. */ static void buslogicR3SuspendOrPowerOff(PPDMDEVINS pDevIns) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); ASMAtomicWriteBool(&pThisCC->fSignalIdle, true); if (!buslogicR3AllAsyncIOIsFinished(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, buslogicR3IsAsyncSuspendOrPowerOffDone); else { ASMAtomicWriteBool(&pThisCC->fSignalIdle, false); AssertMsg(!pThis->fNotificationSent, ("The PDM Queue should be empty at this point\n")); RT_NOREF(pThis); } for (uint32_t i = 0; i < RT_ELEMENTS(pThisCC->aDeviceStates); i++) { PBUSLOGICDEVICE pThisDevice = &pThisCC->aDeviceStates[i]; if (pThisDevice->pDrvMediaEx) pThisDevice->pDrvMediaEx->pfnNotifySuspend(pThisDevice->pDrvMediaEx); } } /** * Suspend notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) buslogicR3Suspend(PPDMDEVINS pDevIns) { Log(("buslogicR3Suspend\n")); buslogicR3SuspendOrPowerOff(pDevIns); } /** * Detach notification. * * One harddisk at one port has been unplugged. * The VM is suspended at this point. * * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(void) buslogicR3Detach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); PBUSLOGICDEVICE pDevice = &pThisCC->aDeviceStates[iLUN]; Log(("%s:\n", __FUNCTION__)); RT_NOREF(fFlags); AssertMsg(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG, ("BusLogic: Device does not support hotplugging\n")); /* * Zero some important members. */ pThis->afDevicePresent[iLUN] = false; pDevice->fPresent = false; pDevice->pDrvBase = NULL; pDevice->pDrvMedia = NULL; pDevice->pDrvMediaEx = NULL; } /** * Attach command. * * This is called when we change block driver. * * @returns VBox status code. * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(int) buslogicR3Attach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); PBUSLOGICDEVICE pDevice = &pThisCC->aDeviceStates[iLUN]; int rc; AssertMsgReturn(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG, ("BusLogic: Device does not support hotplugging\n"), VERR_INVALID_PARAMETER); /* the usual paranoia */ AssertRelease(!pDevice->pDrvBase); AssertRelease(!pDevice->pDrvMedia); AssertRelease(!pDevice->pDrvMediaEx); Assert(pDevice->iLUN == iLUN); /* * Try attach the SCSI driver and get the interfaces, * required as well as optional. */ rc = PDMDevHlpDriverAttach(pDevIns, pDevice->iLUN, &pDevice->IBase, &pDevice->pDrvBase, NULL); if (RT_SUCCESS(rc)) { /* Query the media interface. */ pDevice->pDrvMedia = PDMIBASE_QUERY_INTERFACE(pDevice->pDrvBase, PDMIMEDIA); AssertMsgReturn(VALID_PTR(pDevice->pDrvMedia), ("BusLogic configuration error: LUN#%d misses the basic media interface!\n", pDevice->iLUN), VERR_PDM_MISSING_INTERFACE); /* Get the extended media interface. */ pDevice->pDrvMediaEx = PDMIBASE_QUERY_INTERFACE(pDevice->pDrvBase, PDMIMEDIAEX); AssertMsgReturn(VALID_PTR(pDevice->pDrvMediaEx), ("BusLogic configuration error: LUN#%d misses the extended media interface!\n", pDevice->iLUN), VERR_PDM_MISSING_INTERFACE); rc = pDevice->pDrvMediaEx->pfnIoReqAllocSizeSet(pDevice->pDrvMediaEx, sizeof(BUSLOGICREQ)); AssertMsgRCReturn(rc, ("BusLogic configuration error: LUN#%u: Failed to set I/O request size!", pDevice->iLUN), rc); pThis->afDevicePresent[iLUN] = true; pDevice->fPresent = true; } else AssertMsgFailed(("Failed to attach LUN#%d. rc=%Rrc\n", pDevice->iLUN, rc)); if (RT_FAILURE(rc)) { pThis->afDevicePresent[iLUN] = false; pDevice->fPresent = false; pDevice->pDrvBase = NULL; pDevice->pDrvMedia = NULL; pDevice->pDrvMediaEx = NULL; } return rc; } /** * Callback employed by buslogicR3Reset. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) buslogicR3IsAsyncResetDone(PPDMDEVINS pDevIns) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); if (!buslogicR3AllAsyncIOIsFinished(pDevIns)) return false; ASMAtomicWriteBool(&pThisCC->fSignalIdle, false); buslogicR3HwReset(pDevIns, pThis, true); return true; } /** * @copydoc FNPDMDEVRESET */ static DECLCALLBACK(void) buslogicR3Reset(PPDMDEVINS pDevIns) { PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); ASMAtomicWriteBool(&pThisCC->fSignalIdle, true); if (!buslogicR3AllAsyncIOIsFinished(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, buslogicR3IsAsyncResetDone); else { ASMAtomicWriteBool(&pThisCC->fSignalIdle, false); buslogicR3HwReset(pDevIns, pThis, true); } } /** * Poweroff notification. * * @param pDevIns Pointer to the device instance */ static DECLCALLBACK(void) buslogicR3PowerOff(PPDMDEVINS pDevIns) { Log(("buslogicR3PowerOff\n")); buslogicR3SuspendOrPowerOff(pDevIns); } /** * Destroy a driver instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @param pDevIns The device instance data. */ static DECLCALLBACK(int) buslogicR3Destruct(PPDMDEVINS pDevIns) { PDMDEV_CHECK_VERSIONS_RETURN_QUIET(pDevIns); PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PDMDevHlpCritSectDelete(pDevIns, &pThis->CritSectIntr); if (pThis->hEvtProcess != NIL_SUPSEMEVENT) { PDMDevHlpSUPSemEventClose(pDevIns, pThis->hEvtProcess); pThis->hEvtProcess = NIL_SUPSEMEVENT; } return VINF_SUCCESS; } /** * @interface_method_impl{PDMDEVREG,pfnConstruct} */ static DECLCALLBACK(int) buslogicR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); PBUSLOGICCC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBUSLOGICCC); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; /* * Init instance data (do early because of constructor). */ pThis->hMmio = NIL_IOMMMIOHANDLE; pThis->hIoPortsIsa = NIL_IOMIOPORTHANDLE; pThis->hIoPortsPci = NIL_IOMIOPORTHANDLE; pThisCC->pDevIns = pDevIns; pThisCC->IBase.pfnQueryInterface = buslogicR3StatusQueryInterface; pThisCC->ILeds.pfnQueryStatusLed = buslogicR3StatusQueryStatusLed; PPDMPCIDEV pPciDev = pDevIns->apPciDevs[0]; PDMPCIDEV_ASSERT_VALID(pDevIns, pPciDev); PDMPciDevSetVendorId(pPciDev, 0x104b); /* BusLogic */ PDMPciDevSetDeviceId(pPciDev, 0x1040); /* BT-958 */ PDMPciDevSetCommand(pPciDev, PCI_COMMAND_IOACCESS | PCI_COMMAND_MEMACCESS); PDMPciDevSetRevisionId(pPciDev, 0x01); PDMPciDevSetClassProg(pPciDev, 0x00); /* SCSI */ PDMPciDevSetClassSub(pPciDev, 0x00); /* SCSI */ PDMPciDevSetClassBase(pPciDev, 0x01); /* Mass storage */ PDMPciDevSetBaseAddress(pPciDev, 0, true /*IO*/, false /*Pref*/, false /*64-bit*/, 0x00000000); PDMPciDevSetBaseAddress(pPciDev, 1, false /*IO*/, false /*Pref*/, false /*64-bit*/, 0x00000000); PDMPciDevSetSubSystemVendorId(pPciDev, 0x104b); PDMPciDevSetSubSystemId(pPciDev, 0x1040); PDMPciDevSetInterruptLine(pPciDev, 0x00); PDMPciDevSetInterruptPin(pPciDev, 0x01); /* * Validate and read configuration. */ PDMDEV_VALIDATE_CONFIG_RETURN(pDevIns, "Bootable|" /* Keep it for legacy configs, even though it doesn't do anything anymore, see @bugref{4841}. */ "AdapterType|" "ISACompat", ""); /* Figure out the emulated device type. */ char szCfgStr[16]; int rc = pHlp->pfnCFGMQueryStringDef(pCfg, "AdapterType", szCfgStr, sizeof(szCfgStr), "BT-958D"); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("BusLogic configuration error: failed to read AdapterType as string")); Log(("%s: AdapterType=%s\n", __FUNCTION__, szCfgStr)); /* Grok the AdapterType setting. */ if (!strcmp(szCfgStr, "BT-958D")) /* Default PCI device, 32-bit and 24-bit addressing. */ { pThis->uDevType = DEV_BT_958D; pThis->uDefaultISABaseCode = ISA_BASE_DISABLED; } else if (!strcmp(szCfgStr, "BT-545C")) /* ISA device, 24-bit addressing only. */ { pThis->uDevType = DEV_BT_545C; pThis->uIsaIrq = 11; } else if (!strcmp(szCfgStr, "AHA-1540B")) /* Competitor ISA device. */ { pThis->uDevType = DEV_AHA_1540B; pThis->uIsaIrq = 11; } else return PDMDEV_SET_ERROR(pDevIns, VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES, N_("BusLogic configuration error: invalid AdapterType setting")); /* Only the first instance defaults to having the ISA compatibility ports enabled. */ if (iInstance == 0) rc = pHlp->pfnCFGMQueryStringDef(pCfg, "ISACompat", szCfgStr, sizeof(szCfgStr), "Alternate"); else rc = pHlp->pfnCFGMQueryStringDef(pCfg, "ISACompat", szCfgStr, sizeof(szCfgStr), "Disabled"); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("BusLogic configuration error: failed to read ISACompat as string")); Log(("%s: ISACompat=%s\n", __FUNCTION__, szCfgStr)); /* Grok the ISACompat setting. */ if (!strcmp(szCfgStr, "Disabled")) pThis->uDefaultISABaseCode = ISA_BASE_DISABLED; else if (!strcmp(szCfgStr, "Primary")) pThis->uDefaultISABaseCode = 0; /* I/O base at 330h. */ else if (!strcmp(szCfgStr, "Alternate")) pThis->uDefaultISABaseCode = 1; /* I/O base at 334h. */ else return PDMDEV_SET_ERROR(pDevIns, VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES, N_("BusLogic configuration error: invalid ISACompat setting")); /* * Register the PCI device and its I/O regions if applicable. */ if (!pThis->uIsaIrq) { rc = PDMDevHlpPCIRegister(pDevIns, pPciDev); AssertRCReturn(rc, rc); rc = PDMDevHlpPCIIORegionCreateIo(pDevIns, 0 /*iPciRegion*/, 32 /*cPorts*/, buslogicIOPortWrite, buslogicIOPortRead, NULL /*pvUser*/, "BusLogic PCI", NULL /*paExtDescs*/, &pThis->hIoPortsPci); AssertRCReturn(rc, rc); rc = PDMDevHlpPCIIORegionCreateMmio(pDevIns, 1 /*iPciRegion*/, 32 /*cbRegion*/, PCI_ADDRESS_SPACE_MEM, buslogicMMIOWrite, buslogicMMIORead, NULL /*pvUser*/, IOMMMIO_FLAGS_READ_PASSTHRU | IOMMMIO_FLAGS_WRITE_PASSTHRU, "BusLogic MMIO", &pThis->hMmio); AssertRCReturn(rc, rc); } /* Set up the compatibility I/O range. */ rc = PDMDevHlpIoPortCreate(pDevIns, 4 /*cPorts*/, NULL /*pPciDev*/, UINT32_MAX /*iPciRegion*/, buslogicIOPortWrite, buslogicIOPortRead, NULL /*pvUser*/, "BusLogic ISA", NULL /*paExtDescs*/, &pThis->hIoPortsIsa); AssertRCReturn(rc, rc); rc = buslogicR3RegisterISARange(pDevIns, pThis, pThis->uDefaultISABaseCode); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("BusLogic cannot register ISA I/O handlers")); /* Init the interrupt critsect. */ rc = PDMDevHlpCritSectInit(pDevIns, &pThis->CritSectIntr, RT_SRC_POS, "BusLogic-Intr#%u", pDevIns->iInstance); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("BusLogic: cannot create critical section")); /* * Create event semaphore and worker thread. */ rc = PDMDevHlpSUPSemEventCreate(pDevIns, &pThis->hEvtProcess); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("BusLogic: Failed to create SUP event semaphore")); char szDevTag[20]; RTStrPrintf(szDevTag, sizeof(szDevTag), "BUSLOGIC-%u", iInstance); rc = PDMDevHlpThreadCreate(pDevIns, &pThisCC->pThreadWrk, pThis, buslogicR3Worker, buslogicR3WorkerWakeUp, 0, RTTHREADTYPE_IO, szDevTag); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("BusLogic: Failed to create worker thread %s"), szDevTag); /* Initialize per device state. */ for (unsigned i = 0; i < RT_ELEMENTS(pThisCC->aDeviceStates); i++) { PBUSLOGICDEVICE pDevice = &pThisCC->aDeviceStates[i]; /* Initialize static parts of the device. */ pDevice->iLUN = i; pDevice->pDevIns = pDevIns; pDevice->Led.u32Magic = PDMLED_MAGIC; pDevice->IBase.pfnQueryInterface = buslogicR3DeviceQueryInterface; pDevice->IMediaPort.pfnQueryDeviceLocation = buslogicR3QueryDeviceLocation; pDevice->IMediaExPort.pfnIoReqCompleteNotify = buslogicR3IoReqCompleteNotify; pDevice->IMediaExPort.pfnIoReqCopyFromBuf = buslogicR3IoReqCopyFromBuf; pDevice->IMediaExPort.pfnIoReqCopyToBuf = buslogicR3IoReqCopyToBuf; pDevice->IMediaExPort.pfnIoReqQueryBuf = NULL; pDevice->IMediaExPort.pfnIoReqQueryDiscardRanges = NULL; pDevice->IMediaExPort.pfnIoReqStateChanged = buslogicR3IoReqStateChanged; pDevice->IMediaExPort.pfnMediumEjected = buslogicR3MediumEjected; pDevice->ILed.pfnQueryStatusLed = buslogicR3DeviceQueryStatusLed; RTStrPrintf(pDevice->szName, sizeof(pDevice->szName), "Device%u", i); /* Attach SCSI driver. */ rc = PDMDevHlpDriverAttach(pDevIns, pDevice->iLUN, &pDevice->IBase, &pDevice->pDrvBase, pDevice->szName); if (RT_SUCCESS(rc)) { /* Query the media interface. */ pDevice->pDrvMedia = PDMIBASE_QUERY_INTERFACE(pDevice->pDrvBase, PDMIMEDIA); AssertMsgReturn(VALID_PTR(pDevice->pDrvMedia), ("Buslogic configuration error: LUN#%d misses the basic media interface!\n", pDevice->iLUN), VERR_PDM_MISSING_INTERFACE); /* Get the extended media interface. */ pDevice->pDrvMediaEx = PDMIBASE_QUERY_INTERFACE(pDevice->pDrvBase, PDMIMEDIAEX); AssertMsgReturn(VALID_PTR(pDevice->pDrvMediaEx), ("Buslogic configuration error: LUN#%d misses the extended media interface!\n", pDevice->iLUN), VERR_PDM_MISSING_INTERFACE); rc = pDevice->pDrvMediaEx->pfnIoReqAllocSizeSet(pDevice->pDrvMediaEx, sizeof(BUSLOGICREQ)); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("Buslogic configuration error: LUN#%u: Failed to set I/O request size!"), pDevice->iLUN); pThis->afDevicePresent[i] = true; pDevice->fPresent = true; } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { pThis->afDevicePresent[i] = false; pDevice->fPresent = false; pDevice->pDrvBase = NULL; pDevice->pDrvMedia = NULL; pDevice->pDrvMediaEx = NULL; rc = VINF_SUCCESS; Log(("BusLogic: no driver attached to device %s\n", pDevice->szName)); } else { AssertLogRelMsgFailed(("BusLogic: Failed to attach %s\n", pDevice->szName)); return rc; } } /* * Attach status driver (optional). */ PPDMIBASE pBase; rc = PDMDevHlpDriverAttach(pDevIns, PDM_STATUS_LUN, &pThisCC->IBase, &pBase, "Status Port"); if (RT_SUCCESS(rc)) { pThisCC->pLedsConnector = PDMIBASE_QUERY_INTERFACE(pBase, PDMILEDCONNECTORS); pThisCC->pMediaNotify = PDMIBASE_QUERY_INTERFACE(pBase, PDMIMEDIANOTIFY); } else AssertMsgReturn(rc == VERR_PDM_NO_ATTACHED_DRIVER, ("Failed to attach to status driver. rc=%Rrc\n", rc), PDMDEV_SET_ERROR(pDevIns, rc, N_("BusLogic cannot attach to status driver"))); rc = PDMDevHlpSSMRegisterEx(pDevIns, BUSLOGIC_SAVED_STATE_MINOR_VERSION, sizeof(*pThis), NULL, NULL, buslogicR3LiveExec, NULL, NULL, buslogicR3SaveExec, NULL, NULL, buslogicR3LoadExec, buslogicR3LoadDone); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("BusLogic cannot register save state handlers")); /* * Register the debugger info callback. */ char szTmp[128]; RTStrPrintf(szTmp, sizeof(szTmp), "%s%d", pDevIns->pReg->szName, pDevIns->iInstance); PDMDevHlpDBGFInfoRegister(pDevIns, szTmp, "BusLogic HBA info", buslogicR3Info); rc = buslogicR3HwReset(pDevIns, pThis, true); AssertMsgRC(rc, ("hardware reset of BusLogic host adapter failed rc=%Rrc\n", rc)); return rc; } #else /* !IN_RING3 */ /** * @callback_method_impl{PDMDEVREGR0,pfnConstruct} */ static DECLCALLBACK(int) buslogicRZConstruct(PPDMDEVINS pDevIns) { PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); PBUSLOGIC pThis = PDMDEVINS_2_DATA(pDevIns, PBUSLOGIC); if (!pThis->uIsaIrq) { int rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPortsPci, buslogicIOPortWrite, buslogicIOPortRead, NULL /*pvUser*/); AssertRCReturn(rc, rc); rc = PDMDevHlpMmioSetUpContext(pDevIns, pThis->hMmio, buslogicMMIOWrite, buslogicMMIORead, NULL /*pvUser*/); AssertRCReturn(rc, rc); } int rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPortsIsa, buslogicIOPortWrite, buslogicIOPortRead, NULL /*pvUser*/); AssertRCReturn(rc, rc); return VINF_SUCCESS; } #endif /* !IN_RING3 */ /** * The device registration structure. */ const PDMDEVREG g_DeviceBusLogic = { /* .u32Version = */ PDM_DEVREG_VERSION, /* .uReserved0 = */ 0, /* .szName = */ "buslogic", /* .fFlags = */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RZ | PDM_DEVREG_FLAGS_NEW_STYLE | PDM_DEVREG_FLAGS_FIRST_SUSPEND_NOTIFICATION | PDM_DEVREG_FLAGS_FIRST_POWEROFF_NOTIFICATION | PDM_DEVREG_FLAGS_FIRST_RESET_NOTIFICATION, /* .fClass = */ PDM_DEVREG_CLASS_STORAGE, /* .cMaxInstances = */ ~0U, /* .uSharedVersion = */ 42, /* .cbInstanceShared = */ sizeof(BUSLOGIC), /* .cbInstanceCC = */ sizeof(BUSLOGICCC), /* .cbInstanceRC = */ sizeof(BUSLOGICRC), /* .cMaxPciDevices = */ 1, /* .cMaxMsixVectors = */ 0, /* .pszDescription = */ "BusLogic BT-958 SCSI host adapter.\n", #if defined(IN_RING3) /* .pszRCMod = */ "VBoxDDRC.rc", /* .pszR0Mod = */ "VBoxDDR0.r0", /* .pfnConstruct = */ buslogicR3Construct, /* .pfnDestruct = */ buslogicR3Destruct, /* .pfnRelocate = */ NULL, /* .pfnMemSetup = */ NULL, /* .pfnPowerOn = */ NULL, /* .pfnReset = */ buslogicR3Reset, /* .pfnSuspend = */ buslogicR3Suspend, /* .pfnResume = */ NULL, /* .pfnAttach = */ buslogicR3Attach, /* .pfnDetach = */ buslogicR3Detach, /* .pfnQueryInterface = */ NULL, /* .pfnInitComplete = */ NULL, /* .pfnPowerOff = */ buslogicR3PowerOff, /* .pfnSoftReset = */ NULL, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #elif defined(IN_RING0) /* .pfnEarlyConstruct = */ NULL, /* .pfnConstruct = */ buslogicRZConstruct, /* .pfnDestruct = */ NULL, /* .pfnFinalDestruct = */ NULL, /* .pfnRequest = */ NULL, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #elif defined(IN_RC) /* .pfnConstruct = */ buslogicRZConstruct, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #else # error "Not in IN_RING3, IN_RING0 or IN_RC!" #endif /* .u32VersionEnd = */ PDM_DEVREG_VERSION }; #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */