/* $Id: DrvVUSBRootHub.cpp 106061 2024-09-16 14:03:52Z vboxsync $ */ /** @file * Virtual USB - Root Hub Driver. */ /* * Copyright (C) 2005-2024 Oracle and/or its affiliates. * * This file is part of VirtualBox base platform packages, as * available from https://www.virtualbox.org. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation, in version 3 of the * License. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * * SPDX-License-Identifier: GPL-3.0-only */ /** @page pg_dev_vusb VUSB - Virtual USB * * @todo read thru this and correct typos. Merge with old docs. * * * The Virtual USB component glues USB devices and host controllers together. * The VUSB takes the form of a PDM driver which is attached to the HCI. USB * devices are created by, attached to, and managed by the VUSB roothub. The * VUSB also exposes an interface which is used by Main to attach and detach * proxied USB devices. * * * @section sec_dev_vusb_urb The Life of an URB * * The URB is created when the HCI calls the roothub (VUSB) method pfnNewUrb. * VUSB has a pool of URBs, if no free URBs are available a new one is * allocated. The returned URB starts life in the ALLOCATED state and all * fields are initialized with sensible defaults. * * The HCI then copies any request data into the URB if it's an host2dev * transfer. It then submits the URB by calling the pfnSubmitUrb roothub * method. * * pfnSubmitUrb will start by checking if it knows the device address, and if * it doesn't the URB is completed with a device-not-ready error. When the * device address is known to it, action is taken based on the kind of * transfer it is. There are four kinds of transfers: 1. control, 2. bulk, * 3. interrupt, and 4. isochronous. In either case something eventually ends * up being submitted to the device. * * * If an URB fails submitting, may or may not be completed. This depends on * heuristics in some cases and on the kind of failure in others. If * pfnSubmitUrb returns a failure, the HCI should retry submitting it at a * later time. If pfnSubmitUrb returns success the URB is submitted, and it * can even been completed. * * The URB is in the IN_FLIGHT state from the time it's successfully submitted * and till it's reaped or cancelled. * * When an URB transfer or in some case submit failure occurs, the pfnXferError * callback of the HCI is consulted about what to do. If pfnXferError indicates * that the URB should be retried, pfnSubmitUrb will fail. If it indicates that * it should fail, the URB will be completed. * * Completing an URB means that the URB status is set and the HCI * pfnXferCompletion callback is invoked with the URB. The HCI is the supposed * to report the transfer status to the guest OS. After completion the URB * is freed and returned to the pool, unless it was cancelled. If it was * cancelled it will have to await reaping before it's actually freed. * * * @subsection subsec_dev_vusb_urb_ctrl Control * * The control transfer is the most complex one, from VUSB's point of view, * with its three stages and being bi-directional. A control transfer starts * with a SETUP packet containing the request description and two basic * parameters. It is followed by zero or more DATA packets which either picks * up incoming data (dev2host) or supplies the request data (host2dev). This * can then be followed by a STATUS packet which gets the status of the whole * transfer. * * What makes the control transfer complicated is that for a host2dev request * the URB is assembled from the SETUP and DATA stage, and for a dev2host * request the returned data must be kept around for the DATA stage. For both * transfer directions the status of the transfer has to be kept around for * the STATUS stage. * * To complicate matters further, VUSB must intercept and in some cases emulate * some of the standard requests in order to keep the virtual device state * correct and provide the correct virtualization of a device. * * @subsection subsec_dev_vusb_urb_bulk Bulk and Interrupt * * The bulk and interrupt transfer types are relativly simple compared to the * control transfer. VUSB is not inspecting the request content or anything, * but passes it down the device. * * @subsection subsec_dev_vusb_urb_isoc Isochronous * * This kind of transfers hasn't yet been implemented. * */ /** @page pg_dev_vusb_old VUSB - Virtual USB Core * * The virtual USB core is controlled by the roothub and the underlying HCI * emulator, it is responsible for device addressing, managing configurations, * interfaces and endpoints, assembling and splitting multi-part control * messages and in general acts as a middle layer between the USB device * emulation code and USB HCI emulation code. * * All USB devices are represented by a struct vusb_dev. This structure * contains things like the device state, device address, all the configuration * descriptors, the currently selected configuration and a mapping between * endpoint addresses and endpoint descriptors. * * Each vusb_dev also has a pointer to a vusb_dev_ops structure which serves as * the virtual method table and includes a virtual constructor and destructor. * After a vusb_dev is created it may be attached to a hub device such as a * roothub (using vusbHubAttach). Although each hub structure has cPorts * and cDevices fields, it is the responsibility of the hub device to allocate * a free port for the new device. * * Devices can chose one of two interfaces for dealing with requests, the * synchronous interface or the asynchronous interface. The synchronous * interface is much simpler and ought to be used for devices which are * unlikely to sleep for long periods in order to serve requests. The * asynchronous interface on the other hand is more difficult to use but is * useful for the USB proxy or if one were to write a mass storage device * emulator. Currently the synchronous interface only supports control and bulk * endpoints and is no longer used by anything. * * In order to use the asynchronous interface, the queue_urb, cancel_urb and * pfnUrbReap fields must be set in the devices vusb_dev_ops structure. The * queue_urb method is used to submit a request to a device without blocking, * it returns 1 if successful and 0 on any kind of failure. A successfully * queued URB is completed when the pfnUrbReap method returns it. Each function * address is reference counted so that pfnUrbReap will only be called if there * are URBs outstanding. For a roothub to reap an URB from any one of it's * devices, the vusbRhReapAsyncUrbs() function is used. * * There are four types of messages an URB may contain: * -# Control - represents a single packet of a multi-packet control * transfer, these are only really used by the host controller to * submit the parts to the usb core. * -# Message - the usb core assembles multiple control transfers in * to single message transfers. In this case the data buffer * contains the setup packet in little endian followed by the full * buffer. In the case of an host-to-device control message, the * message packet is created when the STATUS transfer is seen. In * the case of device-to-host messages, the message packet is * created after the SETUP transfer is seen. Also, certain control * requests never go the real device and get handled synchronously. * -# Bulk - Currently the only endpoint type that does error checking * and endpoint halting. * -# Interrupt - The only non-periodic type supported. * * Hubs are special cases of devices, they have a number of downstream ports * that other devices can be attached to and removed from. * * After a device has been attached (vusbHubAttach): * -# The hub attach method is called, which sends a hub status * change message to the OS. * -# The OS resets the device, and it appears on the default * address with it's config 0 selected (a pseudo-config that * contains only 1 interface with 1 endpoint - the default * message pipe). * -# The OS assigns the device a new address and selects an * appropriate config. * -# The device is ready. * * After a device has been detached (vusbDevDetach): * -# All pending URBs are cancelled. * -# The devices address is unassigned. * -# The hub detach method is called which signals the OS * of the status change. * -# The OS unlinks the ED's for that device. * * A device can also request detachment from within its own methods by * calling vusbDevUnplugged(). * * Roothubs are responsible for driving the whole system, they are special * cases of hubs and as such implement attach and detach methods, each one * is described by a struct vusb_roothub. Once a roothub has submitted an * URB to the USB core, a number of callbacks to the roothub are required * for when the URB completes, since the roothub typically wants to inform * the OS when transfers are completed. * * There are four callbacks to be concerned with: * -# prepare - This is called after the URB is successfully queued. * -# completion - This is called after the URB completed. * -# error - This is called if the URB errored, some systems have * automatic resubmission of failed requests, so this callback * should keep track of the error count and return 1 if the count * is above the number of allowed resubmissions. * -# halt_ep - This is called after errors on bulk pipes in order * to halt the pipe. * */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #define LOG_GROUP LOG_GROUP_DRV_VUSB #include #include #include #include #include #include #include #include #include #include #include #include #include "VUSBInternal.h" #include "VBoxDD.h" #define VUSB_ROOTHUB_SAVED_STATE_VERSION 1 /** * Data used for reattaching devices on a state load. */ typedef struct VUSBROOTHUBLOAD { /** Timer used once after state load to inform the guest about new devices. * We do this to be sure the guest get any disconnect / reconnect on the * same port. */ TMTIMERHANDLE hTimer; /** Number of detached devices. */ unsigned cDevs; /** Array of devices which were detached. */ PVUSBDEV apDevs[VUSB_DEVICES_MAX]; } VUSBROOTHUBLOAD; /** * Returns the attached VUSB device for the given port or NULL if none is attached. * * @returns Pointer to the VUSB device or NULL if not found. * @param pThis The VUSB roothub device instance. * @param uPort The port to get the device for. * @param pszWho Caller of this method. * * @note The reference count of the VUSB device structure is retained to prevent it from going away. */ static PVUSBDEV vusbR3RhGetVUsbDevByPortRetain(PVUSBROOTHUB pThis, uint32_t uPort, const char *pszWho) { PVUSBDEV pDev = NULL; AssertReturn(uPort < RT_ELEMENTS(pThis->apDevByPort), NULL); RTCritSectEnter(&pThis->CritSectDevices); pDev = pThis->apDevByPort[uPort]; if (RT_LIKELY(pDev)) vusbDevRetain(pDev, pszWho); RTCritSectLeave(&pThis->CritSectDevices); return pDev; } /** * Returns the attached VUSB device for the given port or NULL if none is attached. * * @returns Pointer to the VUSB device or NULL if not found. * @param pThis The VUSB roothub device instance. * @param u8Address The address to get the device for. * @param pszWho Caller of this method. * * @note The reference count of the VUSB device structure is retained to prevent it from going away. */ static PVUSBDEV vusbR3RhGetVUsbDevByAddrRetain(PVUSBROOTHUB pThis, uint8_t u8Address, const char *pszWho) { PVUSBDEV pDev = NULL; AssertReturn(u8Address < RT_ELEMENTS(pThis->apDevByAddr), NULL); RTCritSectEnter(&pThis->CritSectDevices); pDev = pThis->apDevByAddr[u8Address]; if (RT_LIKELY(pDev)) vusbDevRetain(pDev, pszWho); RTCritSectLeave(&pThis->CritSectDevices); return pDev; } /** * Returns a human readable string fromthe given USB speed enum. * * @returns Human readable string. * @param enmSpeed The speed to stringify. */ static const char *vusbGetSpeedString(VUSBSPEED enmSpeed) { const char *pszSpeed = NULL; switch (enmSpeed) { case VUSB_SPEED_LOW: pszSpeed = "Low"; break; case VUSB_SPEED_FULL: pszSpeed = "Full"; break; case VUSB_SPEED_HIGH: pszSpeed = "High"; break; case VUSB_SPEED_VARIABLE: pszSpeed = "Variable"; break; case VUSB_SPEED_SUPER: pszSpeed = "Super"; break; case VUSB_SPEED_SUPERPLUS: pszSpeed = "SuperPlus"; break; default: pszSpeed = "Unknown"; break; } return pszSpeed; } /** * Attaches a device to a specific hub. * * This function is called by the vusb_add_device() and vusbRhAttachDevice(). * * @returns VBox status code. * @param pThis The roothub to attach it to. * @param pDev The device to attach. * @thread EMT */ static int vusbHubAttach(PVUSBROOTHUB pThis, PVUSBDEV pDev) { LogFlow(("vusbHubAttach: pThis=%p[%s] pDev=%p[%s]\n", pThis, pThis->pszName, pDev, pDev->pUsbIns->pszName)); /* * Assign a port. */ int iPort = ASMBitFirstSet(&pThis->Bitmap, sizeof(pThis->Bitmap) * 8); if (iPort < 0) { LogRel(("VUSB: No ports available!\n")); return VERR_VUSB_NO_PORTS; } ASMBitClear(&pThis->Bitmap, iPort); pThis->cDevices++; pDev->i16Port = iPort; /* Call the device attach helper, so it can initialize its state. */ int rc = vusbDevAttach(pDev, pThis); if (RT_SUCCESS(rc)) { RTCritSectEnter(&pThis->CritSectDevices); Assert(!pThis->apDevByPort[iPort]); pThis->apDevByPort[iPort] = pDev; RTCritSectLeave(&pThis->CritSectDevices); /* * Call the HCI attach routine and let it have its say before the device is * linked into the device list of this hub. */ VUSBSPEED enmSpeed = pDev->IDevice.pfnGetSpeed(&pDev->IDevice); rc = pThis->pIRhPort->pfnAttach(pThis->pIRhPort, iPort, enmSpeed); if (RT_SUCCESS(rc)) { LogRel(("VUSB: Attached '%s' to port %d on %s (%sSpeed)\n", pDev->pUsbIns->pszName, iPort, pThis->pszName, vusbGetSpeedString(pDev->pUsbIns->enmSpeed))); return VINF_SUCCESS; } /* Remove from the port in case of failure. */ RTCritSectEnter(&pThis->CritSectDevices); Assert(!pThis->apDevByPort[iPort]); pThis->apDevByPort[iPort] = NULL; RTCritSectLeave(&pThis->CritSectDevices); vusbDevDetach(pDev); } ASMBitSet(&pThis->Bitmap, iPort); pThis->cDevices--; pDev->i16Port = -1; LogRel(("VUSB: Failed to attach '%s' to port %d, rc=%Rrc\n", pDev->pUsbIns->pszName, iPort, rc)); return rc; } /** * Detaches the given device from the given roothub. * * @returns VBox status code. * @param pThis The roothub to detach the device from. * @param pDev The device to detach. */ static int vusbHubDetach(PVUSBROOTHUB pThis, PVUSBDEV pDev) { /* * It is possible to race the re-attach timer callback in some extreme cases, * typically involving custom VBox builds that does very little guest code * execution before terminating the VM again (e.g. IEM debugging). */ Assert(pDev->i16Port != -1 || pThis->pLoad); if (pDev->i16Port == -1 && pThis->pLoad) return VINF_SUCCESS; /* * Detach the device and mark the port as available. */ unsigned uPort = pDev->i16Port; pDev->i16Port = -1; pThis->pIRhPort->pfnDetach(pThis->pIRhPort, uPort); ASMBitSet(&pThis->Bitmap, uPort); pThis->cDevices--; /* Check that it's attached and remove it. */ RTCritSectEnter(&pThis->CritSectDevices); Assert(pThis->apDevByPort[uPort] == pDev); pThis->apDevByPort[uPort] = NULL; if (pDev->u8Address != VUSB_INVALID_ADDRESS) { Assert(pThis->apDevByAddr[pDev->u8Address] == pDev); pThis->apDevByAddr[pDev->u8Address] = NULL; pDev->u8Address = VUSB_INVALID_ADDRESS; pDev->u8NewAddress = VUSB_INVALID_ADDRESS; } RTCritSectLeave(&pThis->CritSectDevices); /* Cancel all in-flight URBs from this device. */ vusbDevCancelAllUrbs(pDev, true); /* Free resources. */ vusbDevDetach(pDev); return VINF_SUCCESS; } /* -=-=-=-=-=- PDMUSBHUBREG methods -=-=-=-=-=- */ /** @interface_method_impl{PDMUSBHUBREG,pfnAttachDevice} */ static DECLCALLBACK(int) vusbPDMHubAttachDevice(PPDMDRVINS pDrvIns, PPDMUSBINS pUsbIns, const char *pszCaptureFilename, uint32_t *piPort) { PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); /* * Allocate a new VUSB device and initialize it. */ PVUSBDEV pDev = (PVUSBDEV)RTMemAllocZ(sizeof(*pDev)); AssertReturn(pDev, VERR_NO_MEMORY); int rc = vusbDevInit(pDev, pUsbIns, pszCaptureFilename); if (RT_SUCCESS(rc)) { pUsbIns->pvVUsbDev2 = pDev; rc = vusbHubAttach(pThis, pDev); if (RT_SUCCESS(rc)) { *piPort = UINT32_MAX; /// @todo implement piPort return rc; } RTMemFree(pDev->paIfStates); pUsbIns->pvVUsbDev2 = NULL; } vusbDevRelease(pDev, "vusbPDMHubAttachDevice"); return rc; } /** @interface_method_impl{PDMUSBHUBREG,pfnDetachDevice} */ static DECLCALLBACK(int) vusbPDMHubDetachDevice(PPDMDRVINS pDrvIns, PPDMUSBINS pUsbIns, uint32_t iPort) { RT_NOREF(iPort); PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); PVUSBDEV pDev = (PVUSBDEV)pUsbIns->pvVUsbDev2; Assert(pDev); LogRel(("VUSB: Detached '%s' from port %u on %s\n", pDev->pUsbIns->pszName, pDev->i16Port, pThis->pszName)); /* * Deal with pending async reset. * (anything but reset) */ vusbDevSetStateCmp(pDev, VUSB_DEVICE_STATE_DEFAULT, VUSB_DEVICE_STATE_RESET); vusbHubDetach(pThis, pDev); vusbDevRelease(pDev, "vusbPDMHubDetachDevice"); return VINF_SUCCESS; } /** * The hub registration structure. */ static const PDMUSBHUBREG g_vusbHubReg = { PDM_USBHUBREG_VERSION, vusbPDMHubAttachDevice, vusbPDMHubDetachDevice, PDM_USBHUBREG_VERSION }; /* -=-=-=-=-=- VUSBIROOTHUBCONNECTOR methods -=-=-=-=-=- */ /** * Callback for freeing an URB. * @param pUrb The URB to free. */ static DECLCALLBACK(void) vusbRhFreeUrb(PVUSBURB pUrb) { /* * Assert sanity. */ vusbUrbAssert(pUrb); PVUSBROOTHUB pRh = (PVUSBROOTHUB)pUrb->pVUsb->pvFreeCtx; Assert(pRh); Assert(pUrb->enmState != VUSBURBSTATE_FREE); #ifdef LOG_ENABLED vusbUrbTrace(pUrb, "vusbRhFreeUrb", true); #endif /* * Free the URB description (logging builds only). */ if (pUrb->pszDesc) { RTStrFree(pUrb->pszDesc); pUrb->pszDesc = NULL; } /* The URB comes from the roothub if there is no device (invalid address). */ if (pUrb->pVUsb->pDev) { PVUSBDEV pDev = pUrb->pVUsb->pDev; vusbUrbPoolFree(&pUrb->pVUsb->pDev->UrbPool, pUrb); vusbDevRelease(pDev, "vusbRhFreeUrb"); } else vusbUrbPoolFree(&pRh->UrbPool, pUrb); } /** * Worker routine for vusbRhConnNewUrb(). */ static PVUSBURB vusbRhNewUrb(PVUSBROOTHUB pRh, uint8_t DstAddress, uint32_t uPort, VUSBXFERTYPE enmType, VUSBDIRECTION enmDir, uint32_t cbData, uint32_t cTds, const char *pszTag) { RT_NOREF(pszTag); PVUSBURBPOOL pUrbPool = &pRh->UrbPool; if (RT_UNLIKELY(cbData > (32 * _1M))) { LogFunc(("Bad URB size (%u)!\n", cbData)); return NULL; } PVUSBDEV pDev; if (uPort == VUSB_DEVICE_PORT_INVALID) pDev = vusbR3RhGetVUsbDevByAddrRetain(pRh, DstAddress, "vusbRhNewUrb"); else pDev = vusbR3RhGetVUsbDevByPortRetain(pRh, uPort, "vusbRhNewUrb"); if (pDev) pUrbPool = &pDev->UrbPool; PVUSBURB pUrb = vusbUrbPoolAlloc(pUrbPool, enmType, enmDir, cbData, pRh->cbHci, pRh->cbHciTd, cTds); if (RT_LIKELY(pUrb)) { pUrb->pVUsb->pvFreeCtx = pRh; pUrb->pVUsb->pfnFree = vusbRhFreeUrb; pUrb->DstAddress = DstAddress; pUrb->pVUsb->pDev = pDev; #ifdef LOG_ENABLED const char *pszType = NULL; switch(pUrb->enmType) { case VUSBXFERTYPE_CTRL: pszType = "ctrl"; break; case VUSBXFERTYPE_INTR: pszType = "intr"; break; case VUSBXFERTYPE_BULK: pszType = "bulk"; break; case VUSBXFERTYPE_ISOC: pszType = "isoc"; break; default: pszType = "invld"; break; } pRh->iSerial = (pRh->iSerial + 1) % 10000; RTStrAPrintf(&pUrb->pszDesc, "URB %p %s%c%04d (%s)", pUrb, pszType, (pUrb->enmDir == VUSBDIRECTION_IN) ? '<' : ((pUrb->enmDir == VUSBDIRECTION_SETUP) ? 's' : '>'), pRh->iSerial, pszTag ? pszTag : ""); vusbUrbTrace(pUrb, "vusbRhNewUrb", false); #endif } return pUrb; } /** * Calculate frame timer variables given a frame rate. */ static void vusbRhR3CalcTimerIntervals(PVUSBROOTHUB pThis, uint32_t u32FrameRate) { pThis->nsWait = RT_NS_1SEC / u32FrameRate; pThis->uFrameRate = u32FrameRate; /* Inform the HCD about the new frame rate. */ pThis->pIRhPort->pfnFrameRateChanged(pThis->pIRhPort, u32FrameRate); } /** * Calculates the new frame rate based on the idle detection and number of idle * cycles. * * @param pThis The roothub instance data. * @param fIdle Flag whether the last frame didn't produce any activity. */ static void vusbRhR3FrameRateCalcNew(PVUSBROOTHUB pThis, bool fIdle) { uint32_t uNewFrameRate = pThis->uFrameRate; /* * Adjust the frame timer interval based on idle detection. */ if (fIdle) { pThis->cIdleCycles++; /* Set the new frame rate based on how long we've been idle. Tunable. */ switch (pThis->cIdleCycles) { case 4: uNewFrameRate = 500; break; /* 2ms interval */ case 16:uNewFrameRate = 125; break; /* 8ms interval */ case 24:uNewFrameRate = 50; break; /* 20ms interval */ default: break; } /* Avoid overflow. */ if (pThis->cIdleCycles > 60000) pThis->cIdleCycles = 20000; } else { if (pThis->cIdleCycles) { pThis->cIdleCycles = 0; uNewFrameRate = pThis->uFrameRateDefault; } } if ( uNewFrameRate != pThis->uFrameRate && uNewFrameRate) { LogFlow(("Frame rate changed from %u to %u\n", pThis->uFrameRate, uNewFrameRate)); vusbRhR3CalcTimerIntervals(pThis, uNewFrameRate); } } /** * The core frame processing routine keeping track of the elapsed time and calling into * the device emulation above us to do the work. * * @returns Relative timespan when to process the next frame. * @param pThis The roothub instance data. * @param fCallback Flag whether this method is called from the URB completion callback or * from the worker thread (only used for statistics). */ DECLHIDDEN(uint64_t) vusbRhR3ProcessFrame(PVUSBROOTHUB pThis, bool fCallback) { uint64_t tsNext = 0; uint64_t tsNanoStart = RTTimeNanoTS(); /* Don't do anything if we are not supposed to process anything (EHCI and XHCI). */ if ( !pThis->uFrameRateDefault || ASMAtomicReadBool(&pThis->fSavingState)) return 0; if (ASMAtomicXchgBool(&pThis->fFrameProcessing, true)) return pThis->nsWait; if ( tsNanoStart > pThis->tsFrameProcessed && tsNanoStart - pThis->tsFrameProcessed >= 750 * RT_NS_1US) { LogFlowFunc(("Starting new frame at ts %llu\n", tsNanoStart)); bool fIdle = pThis->pIRhPort->pfnStartFrame(pThis->pIRhPort, 0 /* u32FrameNo */); vusbRhR3FrameRateCalcNew(pThis, fIdle); uint64_t tsNow = RTTimeNanoTS(); tsNext = (tsNanoStart + pThis->nsWait) > tsNow ? (tsNanoStart + pThis->nsWait) - tsNow : 0; pThis->tsFrameProcessed = tsNanoStart; LogFlowFunc(("Current frame took %llu nano seconds to process, next frame in %llu ns\n", tsNow - tsNanoStart, tsNext)); if (fCallback) STAM_COUNTER_INC(&pThis->StatFramesProcessedClbk); else STAM_COUNTER_INC(&pThis->StatFramesProcessedThread); } else { tsNext = (pThis->tsFrameProcessed + pThis->nsWait) > tsNanoStart ? (pThis->tsFrameProcessed + pThis->nsWait) - tsNanoStart : 0; LogFlowFunc(("Next frame is too far away in the future, waiting... (tsNanoStart=%llu tsFrameProcessed=%llu)\n", tsNanoStart, pThis->tsFrameProcessed)); } ASMAtomicXchgBool(&pThis->fFrameProcessing, false); LogFlowFunc(("returns %llu\n", tsNext)); return tsNext; } /** * Worker for processing frames periodically. * * @returns VBox status code. * @param pDrvIns The driver instance. * @param pThread The PDM thread structure for the thread this worker runs on. */ static DECLCALLBACK(int) vusbRhR3PeriodFrameWorker(PPDMDRVINS pDrvIns, PPDMTHREAD pThread) { RT_NOREF(pDrvIns); int rc = VINF_SUCCESS; PVUSBROOTHUB pThis = (PVUSBROOTHUB)pThread->pvUser; if (pThread->enmState == PDMTHREADSTATE_INITIALIZING) return VINF_SUCCESS; while (pThread->enmState == PDMTHREADSTATE_RUNNING) { while ( !ASMAtomicReadU32(&pThis->uFrameRateDefault) && pThread->enmState == PDMTHREADSTATE_RUNNING) { /* Signal the waiter that we are stopped now. */ rc = RTSemEventMultiSignal(pThis->hSemEventPeriodFrameStopped); AssertRC(rc); rc = RTSemEventMultiWait(pThis->hSemEventPeriodFrame, RT_INDEFINITE_WAIT); RTSemEventMultiReset(pThis->hSemEventPeriodFrame); /* * Notify the device above about the frame rate changed if we are supposed to * process frames. */ uint32_t uFrameRate = ASMAtomicReadU32(&pThis->uFrameRateDefault); if (uFrameRate) vusbRhR3CalcTimerIntervals(pThis, uFrameRate); } AssertLogRelMsgReturn(RT_SUCCESS(rc) || rc == VERR_TIMEOUT, ("%Rrc\n", rc), rc); if (RT_UNLIKELY(pThread->enmState != PDMTHREADSTATE_RUNNING)) break; uint64_t tsNext = vusbRhR3ProcessFrame(pThis, false /* fCallback */); if (tsNext >= 250 * RT_NS_1US) { rc = RTSemEventMultiWaitEx(pThis->hSemEventPeriodFrame, RTSEMWAIT_FLAGS_RELATIVE | RTSEMWAIT_FLAGS_NANOSECS | RTSEMWAIT_FLAGS_UNINTERRUPTIBLE, tsNext); AssertLogRelMsg(RT_SUCCESS(rc) || rc == VERR_TIMEOUT, ("%Rrc\n", rc)); RTSemEventMultiReset(pThis->hSemEventPeriodFrame); } } return VINF_SUCCESS; } /** * Unblock the periodic frame thread so it can respond to a state change. * * @returns VBox status code. * @param pDrvIns The driver instance. * @param pThread The send thread. */ static DECLCALLBACK(int) vusbRhR3PeriodFrameWorkerWakeup(PPDMDRVINS pDrvIns, PPDMTHREAD pThread) { RT_NOREF(pThread); PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); return RTSemEventMultiSignal(pThis->hSemEventPeriodFrame); } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnSetUrbParams} */ static DECLCALLBACK(int) vusbRhSetUrbParams(PVUSBIROOTHUBCONNECTOR pInterface, size_t cbHci, size_t cbHciTd) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); pRh->cbHci = cbHci; pRh->cbHciTd = cbHciTd; return VINF_SUCCESS; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnReset} */ static DECLCALLBACK(int) vusbR3RhReset(PVUSBIROOTHUBCONNECTOR pInterface, bool fResetOnLinux) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); return pRh->pIRhPort->pfnReset(pRh->pIRhPort, fResetOnLinux); } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnPowerOn} */ static DECLCALLBACK(int) vusbR3RhPowerOn(PVUSBIROOTHUBCONNECTOR pInterface) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); LogFlow(("vusR3bRhPowerOn: pRh=%p\n", pRh)); Assert( pRh->enmState != VUSB_DEVICE_STATE_DETACHED && pRh->enmState != VUSB_DEVICE_STATE_RESET); if (pRh->enmState == VUSB_DEVICE_STATE_ATTACHED) pRh->enmState = VUSB_DEVICE_STATE_POWERED; return VINF_SUCCESS; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnPowerOff} */ static DECLCALLBACK(int) vusbR3RhPowerOff(PVUSBIROOTHUBCONNECTOR pInterface) { PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); LogFlow(("vusbR3RhDevPowerOff: pThis=%p\n", pThis)); Assert( pThis->enmState != VUSB_DEVICE_STATE_DETACHED && pThis->enmState != VUSB_DEVICE_STATE_RESET); /* * Cancel all URBs and reap them. */ VUSBIRhCancelAllUrbs(&pThis->IRhConnector); for (uint32_t uPort = 0; uPort < RT_ELEMENTS(pThis->apDevByPort); uPort++) VUSBIRhReapAsyncUrbs(&pThis->IRhConnector, uPort, 0); pThis->enmState = VUSB_DEVICE_STATE_ATTACHED; return VINF_SUCCESS; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnNewUrb} */ static DECLCALLBACK(PVUSBURB) vusbRhConnNewUrb(PVUSBIROOTHUBCONNECTOR pInterface, uint8_t DstAddress, uint32_t uPort, VUSBXFERTYPE enmType, VUSBDIRECTION enmDir, uint32_t cbData, uint32_t cTds, const char *pszTag) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); return vusbRhNewUrb(pRh, DstAddress, uPort, enmType, enmDir, cbData, cTds, pszTag); } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnFreeUrb} */ static DECLCALLBACK(int) vusbRhConnFreeUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb) { RT_NOREF(pInterface); pUrb->pVUsb->pfnFree(pUrb); return VINF_SUCCESS; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnSubmitUrb} */ static DECLCALLBACK(int) vusbRhSubmitUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, PPDMLED pLed) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); STAM_PROFILE_START(&pRh->StatSubmitUrb, a); #ifdef VBOX_WITH_STATISTICS /* * Total and per-type submit statistics. */ Assert(pUrb->enmType >= 0 && pUrb->enmType < (int)RT_ELEMENTS(pRh->aTypes)); STAM_COUNTER_INC(&pRh->Total.StatUrbsSubmitted); STAM_COUNTER_INC(&pRh->aTypes[pUrb->enmType].StatUrbsSubmitted); STAM_COUNTER_ADD(&pRh->Total.StatReqBytes, pUrb->cbData); STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqBytes, pUrb->cbData); if (pUrb->enmDir == VUSBDIRECTION_IN) { STAM_COUNTER_ADD(&pRh->Total.StatReqReadBytes, pUrb->cbData); STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqReadBytes, pUrb->cbData); } else { STAM_COUNTER_ADD(&pRh->Total.StatReqWriteBytes, pUrb->cbData); STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqWriteBytes, pUrb->cbData); } if (pUrb->enmType == VUSBXFERTYPE_ISOC) { STAM_COUNTER_ADD(&pRh->StatIsocReqPkts, pUrb->cIsocPkts); if (pUrb->enmDir == VUSBDIRECTION_IN) STAM_COUNTER_ADD(&pRh->StatIsocReqReadPkts, pUrb->cIsocPkts); else STAM_COUNTER_ADD(&pRh->StatIsocReqWritePkts, pUrb->cIsocPkts); } #endif /* If there is a sniffer on the roothub record the URB there. */ if (pRh->hSniffer != VUSBSNIFFER_NIL) { int rc = VUSBSnifferRecordEvent(pRh->hSniffer, pUrb, VUSBSNIFFEREVENT_SUBMIT); if (RT_FAILURE(rc)) LogRel(("VUSB: Capturing URB submit event on the root hub failed with %Rrc\n", rc)); } /* * The device was resolved when we allocated the URB. * Submit it to the device if we found it, if not fail with device-not-ready. */ int rc; if ( pUrb->pVUsb->pDev && pUrb->pVUsb->pDev->pUsbIns) { switch (pUrb->enmDir) { case VUSBDIRECTION_IN: pLed->Asserted.s.fReading = pLed->Actual.s.fReading = 1; rc = vusbUrbSubmit(pUrb); pLed->Actual.s.fReading = 0; break; case VUSBDIRECTION_OUT: pLed->Asserted.s.fWriting = pLed->Actual.s.fWriting = 1; rc = vusbUrbSubmit(pUrb); pLed->Actual.s.fWriting = 0; break; default: rc = vusbUrbSubmit(pUrb); break; } if (RT_FAILURE(rc)) { LogFlow(("vusbRhSubmitUrb: freeing pUrb=%p\n", pUrb)); pUrb->pVUsb->pfnFree(pUrb); } } else { Log(("vusb: pRh=%p: SUBMIT: Address %i not found!!!\n", pRh, pUrb->DstAddress)); pUrb->enmState = VUSBURBSTATE_REAPED; pUrb->enmStatus = VUSBSTATUS_DNR; vusbUrbCompletionRhEx(pRh, pUrb); rc = VINF_SUCCESS; } STAM_PROFILE_STOP(&pRh->StatSubmitUrb, a); return rc; } static DECLCALLBACK(int) vusbRhReapAsyncUrbsWorker(PVUSBDEV pDev, RTMSINTERVAL cMillies) { if (!cMillies) vusbUrbDoReapAsync(&pDev->LstAsyncUrbs, 0); else { uint64_t u64Start = RTTimeMilliTS(); do { vusbUrbDoReapAsync(&pDev->LstAsyncUrbs, RT_MIN(cMillies >> 8, 10)); } while ( !RTListIsEmpty(&pDev->LstAsyncUrbs) && RTTimeMilliTS() - u64Start < cMillies); } return VINF_SUCCESS; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnReapAsyncUrbs} */ static DECLCALLBACK(void) vusbRhReapAsyncUrbs(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uPort, RTMSINTERVAL cMillies) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); NOREF(pRh); PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pRh, uPort, "vusbRhReapAsyncUrbs"); if (!pDev) return; if (!RTListIsEmpty(&pDev->LstAsyncUrbs)) { STAM_PROFILE_START(&pRh->StatReapAsyncUrbs, a); int rc = vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhReapAsyncUrbsWorker, 2, pDev, cMillies); AssertRC(rc); STAM_PROFILE_STOP(&pRh->StatReapAsyncUrbs, a); } vusbDevRelease(pDev, "vusbRhReapAsyncUrbs"); } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnCancelUrbsEp} */ static DECLCALLBACK(int) vusbRhCancelUrbsEp(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); AssertReturn(pRh, VERR_INVALID_PARAMETER); AssertReturn(pUrb, VERR_INVALID_PARAMETER); /// @todo This method of URB canceling may not work on non-Linux hosts. /* * Cancel and reap the URB(s) on an endpoint. */ LogFlow(("vusbRhCancelUrbsEp: pRh=%p pUrb=%p\n", pRh, pUrb)); vusbUrbCancelAsync(pUrb, CANCELMODE_UNDO); /* The reaper thread will take care of completing the URB. */ return VINF_SUCCESS; } /** * Worker doing the actual cancelling of all outstanding URBs on the device I/O thread. * * @returns VBox status code. * @param pDev USB device instance data. */ static DECLCALLBACK(int) vusbRhCancelAllUrbsWorker(PVUSBDEV pDev) { /* * Cancel the URBS. * * Not using th CritAsyncUrbs critical section here is safe * as the I/O thread is the only thread accessing this struture at the * moment. */ PVUSBURBVUSB pVUsbUrb, pVUsbUrbNext; RTListForEachSafe(&pDev->LstAsyncUrbs, pVUsbUrb, pVUsbUrbNext, VUSBURBVUSBINT, NdLst) { PVUSBURB pUrb = pVUsbUrb->pUrb; /* Call the worker directly. */ vusbUrbCancelWorker(pUrb, CANCELMODE_FAIL); } return VINF_SUCCESS; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnCancelAllUrbs} */ static DECLCALLBACK(void) vusbRhCancelAllUrbs(PVUSBIROOTHUBCONNECTOR pInterface) { PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); RTCritSectEnter(&pThis->CritSectDevices); for (unsigned i = 0; i < RT_ELEMENTS(pThis->apDevByPort); i++) { PVUSBDEV pDev = pThis->apDevByPort[i]; if (pDev) vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhCancelAllUrbsWorker, 1, pDev); } RTCritSectLeave(&pThis->CritSectDevices); } /** * Worker doing the actual cancelling of all outstanding per-EP URBs on the * device I/O thread. * * @returns VBox status code. * @param pDev USB device instance data. * @param EndPt Endpoint number. * @param enmDir Endpoint direction. */ static DECLCALLBACK(int) vusbRhAbortEpWorker(PVUSBDEV pDev, int EndPt, VUSBDIRECTION enmDir) { /* * Iterate the URBs, find ones corresponding to given EP, and cancel them. */ PVUSBURBVUSB pVUsbUrb, pVUsbUrbNext; RTListForEachSafe(&pDev->LstAsyncUrbs, pVUsbUrb, pVUsbUrbNext, VUSBURBVUSBINT, NdLst) { PVUSBURB pUrb = pVUsbUrb->pUrb; Assert(pUrb->pVUsb->pDev == pDev); /* For the default control EP, direction does not matter. */ if (pUrb->EndPt == EndPt && (pUrb->enmDir == enmDir || !EndPt)) { LogFlow(("%s: vusbRhAbortEpWorker: CANCELING URB\n", pUrb->pszDesc)); int rc = vusbUrbCancelWorker(pUrb, CANCELMODE_UNDO); AssertRC(rc); } } return VINF_SUCCESS; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnAbortEpByPort} */ static DECLCALLBACK(int) vusbRhAbortEpByPort(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uPort, int EndPt, VUSBDIRECTION enmDir) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pRh, uPort, "vusbRhAbortEpByPort"); /* We expect to be called from a device like xHCI which keeps good track * of device <--> port correspondence. Being called for a nonexistent * device is an error. */ AssertPtrReturn(pDev, VERR_INVALID_PARAMETER); if (pDev->pHub != pRh) AssertFailedReturn(VERR_INVALID_PARAMETER); vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhAbortEpWorker, 3, pDev, EndPt, enmDir); vusbDevRelease(pDev, "vusbRhAbortEpByPort"); /* The reaper thread will take care of completing the URB. */ return VINF_SUCCESS; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnAbortEpByAddr} */ static DECLCALLBACK(int) vusbRhAbortEpByAddr(PVUSBIROOTHUBCONNECTOR pInterface, uint8_t DstAddress, int EndPt, VUSBDIRECTION enmDir) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); PVUSBDEV pDev = vusbR3RhGetVUsbDevByAddrRetain(pRh, DstAddress, "vusbRhAbortEpByAddr"); /* We expect to be called from a device like OHCI which does not * keep track of device <--> address correspondence and may try to * cancel an address that does not correspond to a device. If there's * no device, just do nothing. */ if (!pDev) return VINF_SUCCESS; if (pDev->pHub != pRh) AssertFailedReturn(VERR_INVALID_PARAMETER); /* This method is the same as vusbRhAbortEp[ByPort], intended for old controllers * which don't have a defined port <-> device relationship. */ vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhAbortEpWorker, 3, pDev, EndPt, enmDir); vusbDevRelease(pDev, "vusbRhAbortEpByAddr"); /* The reaper thread will take care of completing the URB. */ return VINF_SUCCESS; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnSetPeriodicFrameProcessing} */ static DECLCALLBACK(int) vusbRhSetFrameProcessing(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uFrameRate) { int rc = VINF_SUCCESS; PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); /* Create the frame thread lazily. */ if ( !pThis->hThreadPeriodFrame && uFrameRate) { ASMAtomicXchgU32(&pThis->uFrameRateDefault, uFrameRate); pThis->uFrameRate = uFrameRate; vusbRhR3CalcTimerIntervals(pThis, uFrameRate); rc = RTSemEventMultiCreate(&pThis->hSemEventPeriodFrame); AssertRCReturn(rc, rc); rc = RTSemEventMultiCreate(&pThis->hSemEventPeriodFrameStopped); AssertRCReturn(rc, rc); rc = PDMDrvHlpThreadCreate(pThis->pDrvIns, &pThis->hThreadPeriodFrame, pThis, vusbRhR3PeriodFrameWorker, vusbRhR3PeriodFrameWorkerWakeup, 0, RTTHREADTYPE_IO, "VUsbPeriodFrm"); AssertRCReturn(rc, rc); VMSTATE enmState = PDMDrvHlpVMState(pThis->pDrvIns); if ( enmState == VMSTATE_RUNNING || enmState == VMSTATE_RUNNING_LS) { rc = PDMDrvHlpThreadResume(pThis->pDrvIns, pThis->hThreadPeriodFrame); AssertRCReturn(rc, rc); } } else if ( pThis->hThreadPeriodFrame && !uFrameRate) { /* Stop processing. */ uint32_t uFrameRateOld = ASMAtomicXchgU32(&pThis->uFrameRateDefault, uFrameRate); if (uFrameRateOld) { rc = RTSemEventMultiReset(pThis->hSemEventPeriodFrameStopped); AssertRC(rc); /* Signal the frame thread to stop. */ RTSemEventMultiSignal(pThis->hSemEventPeriodFrame); /* Wait for signal from the thread that it stopped. */ rc = RTSemEventMultiWait(pThis->hSemEventPeriodFrameStopped, RT_INDEFINITE_WAIT); AssertRC(rc); } } else if ( pThis->hThreadPeriodFrame && uFrameRate) { /* Just switch to the new frame rate and let the periodic frame thread pick it up. */ uint32_t uFrameRateOld = ASMAtomicXchgU32(&pThis->uFrameRateDefault, uFrameRate); /* Signal the frame thread to continue if it was stopped. */ if (!uFrameRateOld) RTSemEventMultiSignal(pThis->hSemEventPeriodFrame); } return rc; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnGetPeriodicFrameRate} */ static DECLCALLBACK(uint32_t) vusbRhGetPeriodicFrameRate(PVUSBIROOTHUBCONNECTOR pInterface) { PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); return pThis->uFrameRate; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnUpdateIsocFrameDelta} */ static DECLCALLBACK(uint32_t) vusbRhUpdateIsocFrameDelta(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uPort, int EndPt, VUSBDIRECTION enmDir, uint16_t uNewFrameID, uint8_t uBits) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); AssertReturn(pRh, 0); PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pRh, uPort, "vusbRhUpdateIsocFrameDelta"); AssertPtrReturn(pDev, 0); PVUSBPIPE pPipe = &pDev->aPipes[EndPt]; uint32_t *puLastFrame; int32_t uFrameDelta; uint32_t uMaxVal = 1 << uBits; puLastFrame = enmDir == VUSBDIRECTION_IN ? &pPipe->uLastFrameIn : &pPipe->uLastFrameOut; uFrameDelta = uNewFrameID - *puLastFrame; *puLastFrame = uNewFrameID; /* Take care of wrap-around. */ if (uFrameDelta < 0) uFrameDelta += uMaxVal; vusbDevRelease(pDev, "vusbRhUpdateIsocFrameDelta"); return (uint16_t)uFrameDelta; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnDevReset} */ static DECLCALLBACK(int) vusbR3RhDevReset(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uPort, bool fResetOnLinux, PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM) { PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pThis, uPort, "vusbR3RhDevReset"); AssertPtrReturn(pDev, VERR_VUSB_DEVICE_NOT_ATTACHED); int rc = VUSBIDevReset(&pDev->IDevice, fResetOnLinux, pfnDone, pvUser, pVM); vusbDevRelease(pDev, "vusbR3RhDevReset"); return rc; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnDevPowerOn} */ static DECLCALLBACK(int) vusbR3RhDevPowerOn(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uPort) { PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pThis, uPort, "vusbR3RhDevPowerOn"); AssertPtrReturn(pDev, VERR_VUSB_DEVICE_NOT_ATTACHED); int rc = VUSBIDevPowerOn(&pDev->IDevice); vusbDevRelease(pDev, "vusbR3RhDevPowerOn"); return rc; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnDevPowerOff} */ static DECLCALLBACK(int) vusbR3RhDevPowerOff(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uPort) { PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pThis, uPort, "vusbR3RhDevPowerOff"); AssertPtrReturn(pDev, VERR_VUSB_DEVICE_NOT_ATTACHED); int rc = VUSBIDevPowerOff(&pDev->IDevice); vusbDevRelease(pDev, "vusbR3RhDevPowerOff"); return rc; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnDevGetState} */ static DECLCALLBACK(VUSBDEVICESTATE) vusbR3RhDevGetState(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uPort) { PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pThis, uPort, "vusbR3RhDevGetState"); AssertPtrReturn(pDev, VUSB_DEVICE_STATE_DETACHED); VUSBDEVICESTATE enmState = VUSBIDevGetState(&pDev->IDevice); vusbDevRelease(pDev, "vusbR3RhDevGetState"); return enmState; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnDevIsSavedStateSupported} */ static DECLCALLBACK(bool) vusbR3RhDevIsSavedStateSupported(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uPort) { PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pThis, uPort, "vusbR3RhDevIsSavedStateSupported"); AssertPtrReturn(pDev, false); bool fSavedStateSupported = VUSBIDevIsSavedStateSupported(&pDev->IDevice); vusbDevRelease(pDev, "vusbR3RhDevIsSavedStateSupported"); return fSavedStateSupported; } /** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnDevGetSpeed} */ static DECLCALLBACK(VUSBSPEED) vusbR3RhDevGetSpeed(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uPort) { PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pThis, uPort, "vusbR3RhDevGetSpeed"); AssertPtrReturn(pDev, VUSB_SPEED_UNKNOWN); VUSBSPEED enmSpeed = pDev->IDevice.pfnGetSpeed(&pDev->IDevice); vusbDevRelease(pDev, "vusbR3RhDevGetSpeed"); return enmSpeed; } /** * Helper that frees up pThis->pLoad. * * This is called in a few places. */ static void vushR3RhFreeLoadData(PVUSBROOTHUB pThis, PPDMDRVINS pDrvIns) { PVUSBROOTHUBLOAD const pLoad = pThis->pLoad; if (pLoad) { pThis->pLoad = NULL; PDMDrvHlpTimerDestroy(pDrvIns, pLoad->hTimer); pLoad->hTimer = NIL_TMTIMERHANDLE; RTMemFree(pLoad); } } /** * @callback_method_impl{FNSSMDRVSAVEPREP, All URBs needs to be canceled.} */ static DECLCALLBACK(int) vusbR3RhSavePrep(PPDMDRVINS pDrvIns, PSSMHANDLE pSSM) { PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); LogFlow(("vusbR3RhSavePrep:\n")); RT_NOREF(pSSM); ASMAtomicXchgBool(&pThis->fSavingState, true); /* * If there is old load state hanging around, we'll have to execute it first * to get the hub into the right state prior to saving. This isn't entirely * right wrt snapshotting and continuing execution, but OTOH it will screw up * if shutting down afterwards. */ PVUSBROOTHUBLOAD const pLoad = pThis->pLoad; if (pLoad) { for (unsigned i = 0; i < pLoad->cDevs; i++) vusbHubAttach(pThis, pLoad->apDevs[i]); vushR3RhFreeLoadData(pThis, pDrvIns); } /* * Detach all proxied devices. */ /** @todo we a) can't tell which are proxied, and b) this won't work well when continuing after saving! */ for (unsigned i = 0; i < RT_ELEMENTS(pThis->apDevByPort); i++) { PVUSBDEV pDev = vusbR3RhGetVUsbDevByPortRetain(pThis, i, "SavePrep"); if (pDev) { if (!VUSBIDevIsSavedStateSupported(&pDev->IDevice)) { int rc = vusbHubDetach(pThis, pDev); AssertRC(rc); /* * Save the device pointers here so we can reattach them afterwards. * This will work fine even if the save fails since the Done handler is * called unconditionally if the Prep handler was called. */ Assert(!pThis->apDevByPort[i]); pThis->apDevByPort[i] = pDev; vusbDevRelease(pDev, "SavePrep"); } } } return VINF_SUCCESS; } /** * @callback_method_impl{FNSSMDRVSAVEDONE} */ static DECLCALLBACK(int) vusbR3RhSaveDone(PPDMDRVINS pDrvIns, PSSMHANDLE pSSM) { PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); PVUSBDEV aPortsOld[VUSB_DEVICES_MAX]; unsigned i; LogFlow(("vusbR3RhSaveDone:\n")); RT_NOREF(pSSM); /* Save the current data. */ memcpy(aPortsOld, pThis->apDevByPort, sizeof(aPortsOld)); AssertCompile(sizeof(aPortsOld) == sizeof(pThis->apDevByPort)); /* * NULL the dev pointers. */ for (i = 0; i < RT_ELEMENTS(pThis->apDevByPort); i++) if (pThis->apDevByPort[i] && !VUSBIDevIsSavedStateSupported(&pThis->apDevByPort[i]->IDevice)) pThis->apDevByPort[i] = NULL; /* * Attach the devices. */ for (i = 0; i < RT_ELEMENTS(pThis->apDevByPort); i++) { PVUSBDEV pDev = aPortsOld[i]; if (pDev && !VUSBIDevIsSavedStateSupported(&pDev->IDevice)) vusbHubAttach(pThis, pDev); } ASMAtomicXchgBool(&pThis->fSavingState, false); return VINF_SUCCESS; } /** * @callback_method_impl{FNSSMDRVLOADPREP, This must detach the devices * currently attached and save them for reconnect after the state load has been * completed.} */ static DECLCALLBACK(int) vusbR3RhLoadPrep(PPDMDRVINS pDrvIns, PSSMHANDLE pSSM) { PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); int rc = VINF_SUCCESS; LogFlow(("vusbR3RhLoadPrep:\n")); RT_NOREF(pSSM); if (!pThis->pLoad) { /** @todo allocate first, it may fail later and we'll potentially leave things * dangling. */ VUSBROOTHUBLOAD Load; unsigned i; /// @todo This is all bogus. /* * Detach all devices which are present in this session. Save them in the load * structure so we can reattach them after restoring the guest. */ Load.hTimer = NIL_TMTIMERHANDLE; Load.cDevs = 0; for (i = 0; i < RT_ELEMENTS(pThis->apDevByPort); i++) { PVUSBDEV pDev = pThis->apDevByPort[i]; if (pDev && !VUSBIDevIsSavedStateSupported(&pDev->IDevice)) { Load.apDevs[Load.cDevs++] = pDev; vusbHubDetach(pThis, pDev); Assert(!pThis->apDevByPort[i]); } } /* * Any devices to reattach? If so, duplicate the Load struct. */ if (Load.cDevs) { pThis->pLoad = (PVUSBROOTHUBLOAD)RTMemDup(&Load, sizeof(Load)); if (!pThis->pLoad) return VERR_NO_MEMORY; } } /* else: we ASSUME no device can be attached or detached in the time * between a state load and the pLoad stuff processing. */ return rc; } /** * Timer callback that reattaches devices after a saved state load. * */ static DECLCALLBACK(void) vusbR3RhLoadReattachDevices(PPDMDRVINS pDrvIns, TMTIMERHANDLE hTimer, void *pvUser) { PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); PVUSBROOTHUBLOAD pLoad = pThis->pLoad; AssertPtrReturnVoid(pLoad); LogFlow(("vusbR3RhLoadReattachDevices:\n")); Assert(hTimer == pLoad->hTimer); RT_NOREF(hTimer, pvUser); /* * Reattach devices. */ for (unsigned i = 0; i < pLoad->cDevs; i++) vusbHubAttach(pThis, pLoad->apDevs[i]); /* * Cleanup. */ vushR3RhFreeLoadData(pThis, pDrvIns); } /** * @callback_method_impl{FNSSMDRVLOADDONE} */ static DECLCALLBACK(int) vusbR3RhLoadDone(PPDMDRVINS pDrvIns, PSSMHANDLE pSSM) { PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); LogFlow(("vusbR3RhLoadDone:\n")); RT_NOREF(pSSM); /* * Start a timer if we've got devices to reattach */ PVUSBROOTHUBLOAD const pLoad = pThis->pLoad; if (pLoad) { int rc = PDMDrvHlpSSMHandleGetStatus(pDrvIns, pSSM); if (RT_SUCCESS(rc)) { rc = PDMDrvHlpTMTimerCreate(pDrvIns, TMCLOCK_VIRTUAL, vusbR3RhLoadReattachDevices, NULL, TMTIMER_FLAGS_NO_CRIT_SECT | TMTIMER_FLAGS_NO_RING0, "VUSB reattach on load", &pLoad->hTimer); AssertLogRelRC(rc); if (RT_SUCCESS(rc)) { rc = PDMDrvHlpTimerSetMillies(pDrvIns, pLoad->hTimer, 250); if (RT_SUCCESS(rc)) return VINF_SUCCESS; } } else rc = VINF_SUCCESS; vushR3RhFreeLoadData(pThis, pDrvIns); /** @todo or call vusbR3RhLoadReattachDevices directly then fail? */ return rc; } return VINF_SUCCESS; } /* -=-=-=-=-=- PDM Base interface methods -=-=-=-=-=- */ /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) vusbRhQueryInterface(PPDMIBASE pInterface, const char *pszIID) { PPDMDRVINS pDrvIns = PDMIBASE_2_PDMDRV(pInterface); PVUSBROOTHUB pRh = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pDrvIns->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, VUSBIROOTHUBCONNECTOR, &pRh->IRhConnector); return NULL; } /* -=-=-=-=-=- PDM Driver methods -=-=-=-=-=- */ /** * Destruct a driver instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @param pDrvIns The driver instance data. */ static DECLCALLBACK(void) vusbRhDestruct(PPDMDRVINS pDrvIns) { PVUSBROOTHUB pRh = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); PDMDRV_CHECK_VERSIONS_RETURN_VOID(pDrvIns); vusbUrbPoolDestroy(&pRh->UrbPool); if (pRh->pszName) { RTStrFree(pRh->pszName); pRh->pszName = NULL; } if (pRh->hSniffer != VUSBSNIFFER_NIL) VUSBSnifferDestroy(pRh->hSniffer); if (pRh->hSemEventPeriodFrame) RTSemEventMultiDestroy(pRh->hSemEventPeriodFrame); if (pRh->hSemEventPeriodFrameStopped) RTSemEventMultiDestroy(pRh->hSemEventPeriodFrameStopped); RTCritSectDelete(&pRh->CritSectDevices); } /** * Construct a root hub driver instance. * * @copydoc FNPDMDRVCONSTRUCT */ static DECLCALLBACK(int) vusbRhConstruct(PPDMDRVINS pDrvIns, PCFGMNODE pCfg, uint32_t fFlags) { RT_NOREF(fFlags); PDMDRV_CHECK_VERSIONS_RETURN(pDrvIns); PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); PCPDMDRVHLPR3 pHlp = pDrvIns->pHlpR3; LogFlow(("vusbRhConstruct: Instance %d\n", pDrvIns->iInstance)); /* * Validate configuration. */ PDMDRV_VALIDATE_CONFIG_RETURN(pDrvIns, "CaptureFilename", ""); /* * Check that there are no drivers below us. */ AssertMsgReturn(PDMDrvHlpNoAttach(pDrvIns) == VERR_PDM_NO_ATTACHED_DRIVER, ("Configuration error: Not possible to attach anything to this driver!\n"), VERR_PDM_DRVINS_NO_ATTACH); /* * Initialize the critical sections. */ int rc = RTCritSectInit(&pThis->CritSectDevices); if (RT_FAILURE(rc)) return rc; char *pszCaptureFilename = NULL; rc = pHlp->pfnCFGMQueryStringAlloc(pCfg, "CaptureFilename", &pszCaptureFilename); if ( RT_FAILURE(rc) && rc != VERR_CFGM_VALUE_NOT_FOUND) return PDMDrvHlpVMSetError(pDrvIns, rc, RT_SRC_POS, N_("Configuration error: Failed to query value of \"CaptureFilename\"")); /* * Initialize the data members. */ pDrvIns->IBase.pfnQueryInterface = vusbRhQueryInterface; /* the usb device */ pThis->enmState = VUSB_DEVICE_STATE_ATTACHED; //pThis->hub.cPorts - later pThis->cDevices = 0; RTStrAPrintf(&pThis->pszName, "RootHub#%d", pDrvIns->iInstance); /* misc */ pThis->pDrvIns = pDrvIns; /* the connector */ pThis->IRhConnector.pfnSetUrbParams = vusbRhSetUrbParams; pThis->IRhConnector.pfnReset = vusbR3RhReset; pThis->IRhConnector.pfnPowerOn = vusbR3RhPowerOn; pThis->IRhConnector.pfnPowerOff = vusbR3RhPowerOff; pThis->IRhConnector.pfnNewUrb = vusbRhConnNewUrb; pThis->IRhConnector.pfnFreeUrb = vusbRhConnFreeUrb; pThis->IRhConnector.pfnSubmitUrb = vusbRhSubmitUrb; pThis->IRhConnector.pfnReapAsyncUrbs = vusbRhReapAsyncUrbs; pThis->IRhConnector.pfnCancelUrbsEp = vusbRhCancelUrbsEp; pThis->IRhConnector.pfnCancelAllUrbs = vusbRhCancelAllUrbs; pThis->IRhConnector.pfnAbortEpByPort = vusbRhAbortEpByPort; pThis->IRhConnector.pfnAbortEpByAddr = vusbRhAbortEpByAddr; pThis->IRhConnector.pfnSetPeriodicFrameProcessing = vusbRhSetFrameProcessing; pThis->IRhConnector.pfnGetPeriodicFrameRate = vusbRhGetPeriodicFrameRate; pThis->IRhConnector.pfnUpdateIsocFrameDelta = vusbRhUpdateIsocFrameDelta; pThis->IRhConnector.pfnDevReset = vusbR3RhDevReset; pThis->IRhConnector.pfnDevPowerOn = vusbR3RhDevPowerOn; pThis->IRhConnector.pfnDevPowerOff = vusbR3RhDevPowerOff; pThis->IRhConnector.pfnDevGetState = vusbR3RhDevGetState; pThis->IRhConnector.pfnDevIsSavedStateSupported = vusbR3RhDevIsSavedStateSupported; pThis->IRhConnector.pfnDevGetSpeed = vusbR3RhDevGetSpeed; pThis->hSniffer = VUSBSNIFFER_NIL; pThis->cbHci = 0; pThis->cbHciTd = 0; pThis->fFrameProcessing = false; #ifdef LOG_ENABLED pThis->iSerial = 0; #endif /* * Resolve interface(s). */ pThis->pIRhPort = PDMIBASE_QUERY_INTERFACE(pDrvIns->pUpBase, VUSBIROOTHUBPORT); AssertMsgReturn(pThis->pIRhPort, ("Configuration error: the device/driver above us doesn't expose any VUSBIROOTHUBPORT interface!\n"), VERR_PDM_MISSING_INTERFACE_ABOVE); /* * Get number of ports and the availability bitmap. * ASSUME that the number of ports reported now at creation time is the max number. */ pThis->cPorts = pThis->pIRhPort->pfnGetAvailablePorts(pThis->pIRhPort, &pThis->Bitmap); Log(("vusbRhConstruct: cPorts=%d\n", pThis->cPorts)); /* * Get the USB version of the attached HC. * ASSUME that version 2.0 implies high-speed. */ pThis->fHcVersions = pThis->pIRhPort->pfnGetUSBVersions(pThis->pIRhPort); Log(("vusbRhConstruct: fHcVersions=%u\n", pThis->fHcVersions)); rc = vusbUrbPoolInit(&pThis->UrbPool); if (RT_FAILURE(rc)) return rc; if (pszCaptureFilename) { rc = VUSBSnifferCreate(&pThis->hSniffer, 0, pszCaptureFilename, NULL, NULL); if (RT_FAILURE(rc)) return PDMDrvHlpVMSetError(pDrvIns, rc, RT_SRC_POS, N_("VUSBSniffer cannot open '%s' for writing. The directory must exist and it must be writable for the current user"), pszCaptureFilename); PDMDrvHlpMMHeapFree(pDrvIns, pszCaptureFilename); } /* * Register ourselves as a USB hub. * The current implementation uses the VUSBIRHCONFIG interface for communication. */ PCPDMUSBHUBHLP pHlpUsb; /* not used currently */ rc = PDMDrvHlpUSBRegisterHub(pDrvIns, pThis->fHcVersions, pThis->cPorts, &g_vusbHubReg, &pHlpUsb); if (RT_FAILURE(rc)) return rc; /* * Register the saved state data unit for attaching devices. */ rc = PDMDrvHlpSSMRegisterEx(pDrvIns, VUSB_ROOTHUB_SAVED_STATE_VERSION, 0, NULL, NULL, NULL, vusbR3RhSavePrep, NULL, vusbR3RhSaveDone, vusbR3RhLoadPrep, NULL, vusbR3RhLoadDone); AssertRCReturn(rc, rc); /* * Statistics. (It requires a 30" monitor or extremely tiny fonts to edit this "table".) */ #ifdef VBOX_WITH_STATISTICS PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs submitted.", "/VUSB/%d/UrbsSubmitted", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsSubmitted/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsSubmitted/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsSubmitted/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsSubmitted/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs cancelled. (included in failed)", "/VUSB/%d/UrbsCancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsCancelled/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsCancelled/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsCancelled/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsCancelled/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs failing.", "/VUSB/%d/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsFailed/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsFailed/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsFailed/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsFailed/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested transfer.", "/VUSB/%d/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested read transfer.", "/VUSB/%d/ReqReadBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqReadBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqReadBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqReadBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqReadBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested write transfer.", "/VUSB/%d/ReqWriteBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqWriteBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqWriteBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqWriteBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqWriteBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total transfer.", "/VUSB/%d/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total read transfer.", "/VUSB/%d/ActReadBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActReadBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActReadBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActReadBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActReadBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total write transfer.", "/VUSB/%d/ActWriteBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActWriteBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActWriteBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActWriteBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActWriteBytes/Isoc", pDrvIns->iInstance); /* bulk */ PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Bulk/Urbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Bulk/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Bulk/UrbsFailed/Cancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Bulk/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Bulk/ActBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Bulk/ActBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Bulk/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Bulk/ReqBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Bulk/ReqBytes/Write", pDrvIns->iInstance); /* control */ PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Ctrl/Urbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Ctrl/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Ctrl/UrbsFailed/Cancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Ctrl/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Ctrl/ActBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Ctrl/ActBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Ctrl/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Ctrl/ReqBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Ctrl/ReqBytes/Write", pDrvIns->iInstance); /* interrupt */ PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Intr/Urbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Intr/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Intr/UrbsFailed/Cancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Intr/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Intr/ActBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Intr/ActBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Intr/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Intr/ReqBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Intr/ReqBytes/Write", pDrvIns->iInstance); /* isochronous */ PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Isoc/Urbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Isoc/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Isoc/UrbsFailed/Cancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Isoc/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Isoc/ActBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Isoc/ActBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Isoc/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Isoc/ReqBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Isoc/ReqBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of isochronous packets returning data.", "/VUSB/%d/Isoc/ActPkts", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActReadPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Read.", "/VUSB/%d/Isoc/ActPkts/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActWritePkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Write.", "/VUSB/%d/Isoc/ActPkts/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Requested number of isochronous packets.", "/VUSB/%d/Isoc/ReqPkts", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqReadPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Read.", "/VUSB/%d/Isoc/ReqPkts/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqWritePkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Write.", "/VUSB/%d/Isoc/ReqPkts/Write", pDrvIns->iInstance); for (unsigned i = 0; i < RT_ELEMENTS(pThis->aStatIsocDetails); i++) { PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Pkts, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Ok, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Ok", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Ok0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Ok0", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataUnderrun, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataUnderrun", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataUnderrun0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataUnderrun0", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataOverrun, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataOverrun", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].NotAccessed, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/NotAccessed", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Misc, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Misc", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Bytes, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_BYTES, ".", "/VUSB/%d/Isoc/%d/Bytes", pDrvIns->iInstance, i); } PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatReapAsyncUrbs, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling the vusbRhReapAsyncUrbs body (omitting calls when nothing is in-flight).", "/VUSB/%d/ReapAsyncUrbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatSubmitUrb, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling the vusbRhSubmitUrb body.", "/VUSB/%d/SubmitUrb", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatFramesProcessedThread, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Processed frames in the dedicated thread", "/VUSB/%d/FramesProcessedThread", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatFramesProcessedClbk, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Processed frames in the URB completion callback", "/VUSB/%d/FramesProcessedClbk", pDrvIns->iInstance); #endif PDMDrvHlpSTAMRegisterF(pDrvIns, (void *)&pThis->UrbPool.cUrbsInPool, STAMTYPE_U32, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs in the pool.", "/VUSB/%d/cUrbsInPool", pDrvIns->iInstance); return VINF_SUCCESS; } /** * VUSB Root Hub driver registration record. */ const PDMDRVREG g_DrvVUSBRootHub = { /* u32Version */ PDM_DRVREG_VERSION, /* szName */ "VUSBRootHub", /* szRCMod */ "", /* szR0Mod */ "", /* pszDescription */ "VUSB Root Hub Driver.", /* fFlags */ PDM_DRVREG_FLAGS_HOST_BITS_DEFAULT, /* fClass. */ PDM_DRVREG_CLASS_USB, /* cMaxInstances */ ~0U, /* cbInstance */ sizeof(VUSBROOTHUB), /* pfnConstruct */ vusbRhConstruct, /* pfnDestruct */ vusbRhDestruct, /* pfnRelocate */ NULL, /* pfnIOCtl */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ NULL, /* pfnSuspend */ NULL, /* pfnResume */ NULL, /* pfnAttach */ NULL, /* pfnDetach */ NULL, /* pfnPowerOff */ NULL, /* pfnSoftReset */ NULL, /* u32EndVersion */ PDM_DRVREG_VERSION }; /* * Local Variables: * mode: c * c-file-style: "bsd" * c-basic-offset: 4 * tab-width: 4 * indent-tabs-mode: s * End: */