/* $Id: VBoxSDL.cpp 63567 2016-08-16 14:06:54Z vboxsync $ */ /** @file * VBox frontends: VBoxSDL (simple frontend based on SDL): * Main code */ /* * Copyright (C) 2006-2016 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #define LOG_GROUP LOG_GROUP_GUI #include #include #include #include #include #include #include #include using namespace com; #if defined(VBOXSDL_WITH_X11) # include # include # include /* for XC_left_ptr */ # if !defined(VBOX_WITHOUT_XCURSOR) # include # endif # include #endif #ifdef _MSC_VER # pragma warning(push) # pragma warning(disable: 4121) /* warning C4121: 'SDL_SysWMmsg' : alignment of a member was sensitive to packing*/ #endif #ifndef RT_OS_DARWIN # include /* for SDL_GetWMInfo() */ #endif #ifdef _MSC_VER # pragma warning(pop) #endif #include "VBoxSDL.h" #include "Framebuffer.h" #include "Helper.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Xlib would re-define our enums */ #undef True #undef False /********************************************************************************************************************************* * Defined Constants And Macros * *********************************************************************************************************************************/ #ifdef VBOX_SECURELABEL /** extra data key for the secure label */ #define VBOXSDL_SECURELABEL_EXTRADATA "VBoxSDL/SecureLabel" /** label area height in pixels */ #define SECURE_LABEL_HEIGHT 20 #endif /** Enables the rawr[0|3], patm, and casm options. */ #define VBOXSDL_ADVANCED_OPTIONS /********************************************************************************************************************************* * Structures and Typedefs * *********************************************************************************************************************************/ /** Pointer shape change event data structure */ struct PointerShapeChangeData { PointerShapeChangeData(BOOL aVisible, BOOL aAlpha, ULONG aXHot, ULONG aYHot, ULONG aWidth, ULONG aHeight, ComSafeArrayIn(BYTE,pShape)) : visible(aVisible), alpha(aAlpha), xHot(aXHot), yHot(aYHot), width(aWidth), height(aHeight) { // make a copy of the shape com::SafeArray aShape(ComSafeArrayInArg(pShape)); size_t cbShapeSize = aShape.size(); if (cbShapeSize > 0) { shape.resize(cbShapeSize); ::memcpy(shape.raw(), aShape.raw(), cbShapeSize); } } ~PointerShapeChangeData() { } const BOOL visible; const BOOL alpha; const ULONG xHot; const ULONG yHot; const ULONG width; const ULONG height; com::SafeArray shape; }; enum TitlebarMode { TITLEBAR_NORMAL = 1, TITLEBAR_STARTUP = 2, TITLEBAR_SAVE = 3, TITLEBAR_SNAPSHOT = 4 }; /********************************************************************************************************************************* * Internal Functions * *********************************************************************************************************************************/ static bool UseAbsoluteMouse(void); static void ResetKeys(void); static void ProcessKey(SDL_KeyboardEvent *ev); static void InputGrabStart(void); static void InputGrabEnd(void); static void SendMouseEvent(VBoxSDLFB *fb, int dz, int button, int down); static void UpdateTitlebar(TitlebarMode mode, uint32_t u32User = 0); static void SetPointerShape(const PointerShapeChangeData *data); static void HandleGuestCapsChanged(void); static int HandleHostKey(const SDL_KeyboardEvent *pEv); static Uint32 StartupTimer(Uint32 interval, void *param); static Uint32 ResizeTimer(Uint32 interval, void *param); static Uint32 QuitTimer(Uint32 interval, void *param); static int WaitSDLEvent(SDL_Event *event); static void SetFullscreen(bool enable); static RTEXITCODE readPasswordFile(const char *pszFilename, com::Utf8Str *pPasswd); static RTEXITCODE settingsPasswordFile(ComPtr virtualBox, const char *pszFilename); #ifdef VBOX_WITH_SDL13 static VBoxSDLFB * getFbFromWinId(SDL_WindowID id); #endif /********************************************************************************************************************************* * Global Variables * *********************************************************************************************************************************/ static int gHostKeyMod = KMOD_RCTRL; static int gHostKeySym1 = SDLK_RCTRL; static int gHostKeySym2 = SDLK_UNKNOWN; static const char *gHostKeyDisabledCombinations = ""; static const char *gpszPidFile; static BOOL gfGrabbed = FALSE; static BOOL gfGrabOnMouseClick = TRUE; static BOOL gfFullscreenResize = FALSE; static BOOL gfIgnoreNextResize = FALSE; static BOOL gfAllowFullscreenToggle = TRUE; static BOOL gfAbsoluteMouseHost = FALSE; static BOOL gfAbsoluteMouseGuest = FALSE; static BOOL gfRelativeMouseGuest = TRUE; static BOOL gfGuestNeedsHostCursor = FALSE; static BOOL gfOffCursorActive = FALSE; static BOOL gfGuestNumLockPressed = FALSE; static BOOL gfGuestCapsLockPressed = FALSE; static BOOL gfGuestScrollLockPressed = FALSE; static BOOL gfACPITerm = FALSE; static BOOL gfXCursorEnabled = FALSE; static int gcGuestNumLockAdaptions = 2; static int gcGuestCapsLockAdaptions = 2; static uint32_t gmGuestNormalXRes; static uint32_t gmGuestNormalYRes; /** modifier keypress status (scancode as index) */ static uint8_t gaModifiersState[256]; static ComPtr gpMachine; static ComPtr gpConsole; static ComPtr gpMachineDebugger; static ComPtr gpKeyboard; static ComPtr gpMouse; ComPtr gpDisplay; static ComPtr gpVRDEServer; static ComPtr gpProgress; static ULONG gcMonitors = 1; static ComObjPtr gpFramebuffer[64]; static Bstr gaFramebufferId[64]; static SDL_Cursor *gpDefaultCursor = NULL; #ifdef VBOXSDL_WITH_X11 static Cursor gpDefaultOrigX11Cursor; #endif static SDL_Cursor *gpCustomCursor = NULL; #ifndef VBOX_WITH_SDL13 static WMcursor *gpCustomOrigWMcursor = NULL; #endif static SDL_Cursor *gpOffCursor = NULL; static SDL_TimerID gSdlResizeTimer = NULL; static SDL_TimerID gSdlQuitTimer = NULL; #if defined(VBOXSDL_WITH_X11) && !defined(VBOX_WITH_SDL13) static SDL_SysWMinfo gSdlInfo; #endif #ifdef VBOX_SECURELABEL #ifdef RT_OS_WINDOWS #define LIBSDL_TTF_NAME "SDL_ttf" #else #define LIBSDL_TTF_NAME "libSDL_ttf-2.0.so.0" #endif RTLDRMOD gLibrarySDL_ttf = NIL_RTLDRMOD; #endif static RTSEMEVENT g_EventSemSDLEvents; static volatile int32_t g_cNotifyUpdateEventsPending; /** * Event handler for VirtualBoxClient events */ class VBoxSDLClientEventListener { public: VBoxSDLClientEventListener() { } virtual ~VBoxSDLClientEventListener() { } HRESULT init() { return S_OK; } void uninit() { } STDMETHOD(HandleEvent)(VBoxEventType_T aType, IEvent * aEvent) { switch (aType) { case VBoxEventType_OnVBoxSVCAvailabilityChanged: { ComPtr pVSACEv = aEvent; Assert(pVSACEv); BOOL fAvailable = FALSE; pVSACEv->COMGETTER(Available)(&fAvailable); if (!fAvailable) { LogRel(("VBoxSDL: VBoxSVC became unavailable, exiting.\n")); RTPrintf("VBoxSVC became unavailable, exiting.\n"); /* Send QUIT event to terminate the VM as cleanly as possible * given that VBoxSVC is no longer present. */ SDL_Event event = {0}; event.type = SDL_QUIT; PushSDLEventForSure(&event); } break; } default: AssertFailed(); } return S_OK; } }; /** * Event handler for VirtualBox (server) events */ class VBoxSDLEventListener { public: VBoxSDLEventListener() { } virtual ~VBoxSDLEventListener() { } HRESULT init() { return S_OK; } void uninit() { } STDMETHOD(HandleEvent)(VBoxEventType_T aType, IEvent * aEvent) { RT_NOREF(aEvent); switch (aType) { case VBoxEventType_OnExtraDataChanged: { #ifdef VBOX_SECURELABEL ComPtr pEDCEv = aEvent; Assert(pEDCEv); Bstr bstrMachineId; pEDCEv->COMGETTER(MachineId)(bstrMachineId.asOutParam()); if (gpMachine) { /* * check if we're interested in the message */ Bstr bstrOurId; gpMachine->COMGETTER(Id)(bstrOurId.asOutParam()); if (bstrOurId == bstrMachineId) { Bstr bstrKey; pEDCEv->COMGETTER(Key)(bstrKey.asOutParam()); if (bstrKey == VBOXSDL_SECURELABEL_EXTRADATA) { /* * Notify SDL thread of the string update */ SDL_Event event = {0}; event.type = SDL_USEREVENT; event.user.type = SDL_USER_EVENT_SECURELABEL_UPDATE; PushSDLEventForSure(&event); } } } #endif break; } default: AssertFailed(); } return S_OK; } }; /** * Event handler for Console events */ class VBoxSDLConsoleEventListener { public: VBoxSDLConsoleEventListener() : m_fIgnorePowerOffEvents(false) { } virtual ~VBoxSDLConsoleEventListener() { } HRESULT init() { return S_OK; } void uninit() { } STDMETHOD(HandleEvent)(VBoxEventType_T aType, IEvent * aEvent) { // likely all this double copy is now excessive, and we can just use existing event object /// @todo eliminate it switch (aType) { case VBoxEventType_OnMousePointerShapeChanged: { ComPtr pMPSCEv = aEvent; Assert(pMPSCEv); PointerShapeChangeData *data; BOOL visible, alpha; ULONG xHot, yHot, width, height; com::SafeArray shape; pMPSCEv->COMGETTER(Visible)(&visible); pMPSCEv->COMGETTER(Alpha)(&alpha); pMPSCEv->COMGETTER(Xhot)(&xHot); pMPSCEv->COMGETTER(Yhot)(&yHot); pMPSCEv->COMGETTER(Width)(&width); pMPSCEv->COMGETTER(Height)(&height); pMPSCEv->COMGETTER(Shape)(ComSafeArrayAsOutParam(shape)); data = new PointerShapeChangeData(visible, alpha, xHot, yHot, width, height, ComSafeArrayAsInParam(shape)); Assert(data); if (!data) break; SDL_Event event = {0}; event.type = SDL_USEREVENT; event.user.type = SDL_USER_EVENT_POINTER_CHANGE; event.user.data1 = data; int rc = PushSDLEventForSure(&event); if (rc) delete data; break; } case VBoxEventType_OnMouseCapabilityChanged: { ComPtr pMCCEv = aEvent; Assert(pMCCEv); pMCCEv->COMGETTER(SupportsAbsolute)(&gfAbsoluteMouseGuest); pMCCEv->COMGETTER(SupportsRelative)(&gfRelativeMouseGuest); pMCCEv->COMGETTER(NeedsHostCursor)(&gfGuestNeedsHostCursor); SDL_Event event = {0}; event.type = SDL_USEREVENT; event.user.type = SDL_USER_EVENT_GUEST_CAP_CHANGED; PushSDLEventForSure(&event); break; } case VBoxEventType_OnKeyboardLedsChanged: { ComPtr pCLCEv = aEvent; Assert(pCLCEv); BOOL fNumLock, fCapsLock, fScrollLock; pCLCEv->COMGETTER(NumLock)(&fNumLock); pCLCEv->COMGETTER(CapsLock)(&fCapsLock); pCLCEv->COMGETTER(ScrollLock)(&fScrollLock); /* Don't bother the guest with NumLock scancodes if he doesn't set the NumLock LED */ if (gfGuestNumLockPressed != fNumLock) gcGuestNumLockAdaptions = 2; if (gfGuestCapsLockPressed != fCapsLock) gcGuestCapsLockAdaptions = 2; gfGuestNumLockPressed = fNumLock; gfGuestCapsLockPressed = fCapsLock; gfGuestScrollLockPressed = fScrollLock; break; } case VBoxEventType_OnStateChanged: { ComPtr pSCEv = aEvent; Assert(pSCEv); MachineState_T machineState; pSCEv->COMGETTER(State)(&machineState); LogFlow(("OnStateChange: machineState = %d (%s)\n", machineState, GetStateName(machineState))); SDL_Event event = {0}; if ( machineState == MachineState_Aborted || machineState == MachineState_Teleported || (machineState == MachineState_Saved && !m_fIgnorePowerOffEvents) || (machineState == MachineState_PoweredOff && !m_fIgnorePowerOffEvents) ) { /* * We have to inform the SDL thread that the application has be terminated */ event.type = SDL_USEREVENT; event.user.type = SDL_USER_EVENT_TERMINATE; event.user.code = machineState == MachineState_Aborted ? VBOXSDL_TERM_ABEND : VBOXSDL_TERM_NORMAL; } else { /* * Inform the SDL thread to refresh the titlebar */ event.type = SDL_USEREVENT; event.user.type = SDL_USER_EVENT_UPDATE_TITLEBAR; } PushSDLEventForSure(&event); break; } case VBoxEventType_OnRuntimeError: { ComPtr pRTEEv = aEvent; Assert(pRTEEv); BOOL fFatal; pRTEEv->COMGETTER(Fatal)(&fFatal); MachineState_T machineState; gpMachine->COMGETTER(State)(&machineState); const char *pszType; bool fPaused = machineState == MachineState_Paused; if (fFatal) pszType = "FATAL ERROR"; else if (machineState == MachineState_Paused) pszType = "Non-fatal ERROR"; else pszType = "WARNING"; Bstr bstrId, bstrMessage; pRTEEv->COMGETTER(Id)(bstrId.asOutParam()); pRTEEv->COMGETTER(Message)(bstrMessage.asOutParam()); RTPrintf("\n%s: ** %ls **\n%ls\n%s\n", pszType, bstrId.raw(), bstrMessage.raw(), fPaused ? "The VM was paused. Continue with HostKey + P after you solved the problem.\n" : ""); break; } case VBoxEventType_OnCanShowWindow: { ComPtr pCSWEv = aEvent; Assert(pCSWEv); #ifdef RT_OS_DARWIN /* SDL feature not available on Quartz */ #else SDL_SysWMinfo info; SDL_VERSION(&info.version); if (!SDL_GetWMInfo(&info)) pCSWEv->AddVeto(NULL); else pCSWEv->AddApproval(NULL); #endif break; } case VBoxEventType_OnShowWindow: { ComPtr pSWEv = aEvent; Assert(pSWEv); LONG64 winId = 0; pSWEv->COMGETTER(WinId)(&winId); if (winId != 0) break; /* WinId already set by some other listener. */ #ifndef RT_OS_DARWIN SDL_SysWMinfo info; SDL_VERSION(&info.version); if (SDL_GetWMInfo(&info)) { # if defined(VBOXSDL_WITH_X11) pSWEv->COMSETTER(WinId)((LONG64)info.info.x11.wmwindow); # elif defined(RT_OS_WINDOWS) pSWEv->COMSETTER(WinId)((intptr_t)info.window); # else AssertFailed(); # endif } #endif /* !RT_OS_DARWIN */ break; } default: AssertFailed(); } return S_OK; } static const char *GetStateName(MachineState_T machineState) { switch (machineState) { case MachineState_Null: return ""; case MachineState_PoweredOff: return "PoweredOff"; case MachineState_Saved: return "Saved"; case MachineState_Teleported: return "Teleported"; case MachineState_Aborted: return "Aborted"; case MachineState_Running: return "Running"; case MachineState_Teleporting: return "Teleporting"; case MachineState_LiveSnapshotting: return "LiveSnapshotting"; case MachineState_Paused: return "Paused"; case MachineState_Stuck: return "GuruMeditation"; case MachineState_Starting: return "Starting"; case MachineState_Stopping: return "Stopping"; case MachineState_Saving: return "Saving"; case MachineState_Restoring: return "Restoring"; case MachineState_TeleportingPausedVM: return "TeleportingPausedVM"; case MachineState_TeleportingIn: return "TeleportingIn"; case MachineState_RestoringSnapshot: return "RestoringSnapshot"; case MachineState_DeletingSnapshot: return "DeletingSnapshot"; case MachineState_SettingUp: return "SettingUp"; default: return "no idea"; } } void ignorePowerOffEvents(bool fIgnore) { m_fIgnorePowerOffEvents = fIgnore; } private: bool m_fIgnorePowerOffEvents; }; typedef ListenerImpl VBoxSDLClientEventListenerImpl; typedef ListenerImpl VBoxSDLEventListenerImpl; typedef ListenerImpl VBoxSDLConsoleEventListenerImpl; static void show_usage() { RTPrintf("Usage:\n" " --startvm Virtual machine to start, either UUID or name\n" " --separate Run a separate VM process or attach to a running VM\n" " --hda Set temporary first hard disk to file\n" " --fda Set temporary first floppy disk to file\n" " --cdrom Set temporary CDROM/DVD to file/device ('none' to unmount)\n" " --boot Set temporary boot device (a = floppy, c = 1st HD, d = DVD, n = network)\n" " --memory Set temporary memory size in megabytes\n" " --vram Set temporary size of video memory in megabytes\n" " --fullscreen Start VM in fullscreen mode\n" " --fullscreenresize Resize the guest on fullscreen\n" " --fixedmode Use a fixed SDL video mode with given width, height and bits per pixel\n" " --nofstoggle Forbid switching to/from fullscreen mode\n" " --noresize Make the SDL frame non resizable\n" " --nohostkey Disable all hostkey combinations\n" " --nohostkeys ... Disable specific hostkey combinations, see below for valid keys\n" " --nograbonclick Disable mouse/keyboard grabbing on mouse click w/o additions\n" " --detecthostkey Get the hostkey identifier and modifier state\n" " --hostkey {} Set the host key to the values obtained using --detecthostkey\n" " --termacpi Send an ACPI power button event when closing the window\n" " --vrdp Listen for VRDP connections on one of specified ports (default if not specified)\n" " --discardstate Discard saved state (if present) and revert to last snapshot (if present)\n" " --settingspw Specify the settings password\n" " --settingspwfile Specify a file containing the settings password\n" #ifdef VBOX_SECURELABEL " --securelabel Display a secure VM label at the top of the screen\n" " --seclabelfnt TrueType (.ttf) font file for secure session label\n" " --seclabelsiz Font point size for secure session label (default 12)\n" " --seclabelofs Font offset within the secure label (default 0)\n" " --seclabelfgcol Secure label text color RGB value in 6 digit hexadecimal (eg: FFFF00)\n" " --seclabelbgcol Secure label background color RGB value in 6 digit hexadecimal (eg: FF0000)\n" #endif #ifdef VBOXSDL_ADVANCED_OPTIONS " --[no]rawr0 Enable or disable raw ring 3\n" " --[no]rawr3 Enable or disable raw ring 0\n" " --[no]patm Enable or disable PATM\n" " --[no]csam Enable or disable CSAM\n" " --[no]hwvirtex Permit or deny the usage of VT-x/AMD-V\n" #endif "\n" "Key bindings:\n" " + f Switch to full screen / restore to previous view\n" " h Press ACPI power button\n" " n Take a snapshot and continue execution\n" " p Pause / resume execution\n" " q Power off\n" " r VM reset\n" " s Save state and power off\n" " Send \n" " ... Send \n" #if defined(DEBUG) || defined(VBOX_WITH_STATISTICS) "\n" "Further key bindings useful for debugging:\n" " LCtrl + Alt + F12 Reset statistics counter\n" " LCtrl + Alt + F11 Dump statistics to logfile\n" " Alt + F12 Toggle R0 recompiler\n" " Alt + F11 Toggle R3 recompiler\n" " Alt + F10 Toggle PATM\n" " Alt + F9 Toggle CSAM\n" " Alt + F8 Toggle single step mode\n" " LCtrl/RCtrl + F12 Toggle logger\n" " F12 Write log marker to logfile\n" #endif "\n"); } static void PrintError(const char *pszName, CBSTR pwszDescr, CBSTR pwszComponent=NULL) { const char *pszFile, *pszFunc, *pszStat; char pszBuffer[1024]; com::ErrorInfo info; RTStrPrintf(pszBuffer, sizeof(pszBuffer), "%ls", pwszDescr); RTPrintf("\n%s! Error info:\n", pszName); if ( (pszFile = strstr(pszBuffer, "At '")) && (pszFunc = strstr(pszBuffer, ") in ")) && (pszStat = strstr(pszBuffer, "VBox status code: "))) RTPrintf(" %.*s %.*s\n In%.*s %s", pszFile-pszBuffer, pszBuffer, pszFunc-pszFile+1, pszFile, pszStat-pszFunc-4, pszFunc+4, pszStat); else RTPrintf("%s\n", pszBuffer); if (pwszComponent) RTPrintf("(component %ls).\n", pwszComponent); RTPrintf("\n"); } #ifdef VBOXSDL_WITH_X11 /** * Custom signal handler. Currently it is only used to release modifier * keys when receiving the USR1 signal. When switching VTs, we might not * get release events for Ctrl-Alt and in case a savestate is performed * on the new VT, the VM will be saved with modifier keys stuck. This is * annoying enough for introducing this hack. */ void signal_handler_SIGUSR1(int sig, siginfo_t *info, void *secret) { RT_NOREF(info, secret); /* only SIGUSR1 is interesting */ if (sig == SIGUSR1) { /* just release the modifiers */ ResetKeys(); } } /** * Custom signal handler for catching exit events. */ void signal_handler_SIGINT(int sig) { if (gpszPidFile) RTFileDelete(gpszPidFile); signal(SIGINT, SIG_DFL); signal(SIGQUIT, SIG_DFL); signal(SIGSEGV, SIG_DFL); kill(getpid(), sig); } #endif /* VBOXSDL_WITH_X11 */ /** entry point */ extern "C" DECLEXPORT(int) TrustedMain(int argc, char **argv, char **envp) { RT_NOREF(envp); #ifdef RT_OS_WINDOWS ATL::CComModule _Module; /* Required internally by ATL (constructor records instance in global variable). */ #endif #ifdef Q_WS_X11 if (!XInitThreads()) return 1; #endif #ifdef VBOXSDL_WITH_X11 /* * Lock keys on SDL behave different from normal keys: A KeyPress event is generated * if the lock mode gets active and a keyRelease event is generated if the lock mode * gets inactive, that is KeyPress and KeyRelease are sent when pressing the lock key * to change the mode. The current lock mode is reflected in SDL_GetModState(). * * Debian patched libSDL to make the lock keys behave like normal keys * generating a KeyPress/KeyRelease event if the lock key was * pressed/released. With the new behaviour, the lock status is not * reflected in the mod status anymore, but the user can request the old * behaviour by setting an environment variable. To confuse matters further * version 1.2.14 (fortunately including the Debian packaged versions) * adopted the Debian behaviour officially, but inverted the meaning of the * environment variable to select the new behaviour, keeping the old as the * default. We disable the new behaviour to ensure a defined environment * and work around the missing KeyPress/KeyRelease events in ProcessKeys(). */ { const SDL_version *pVersion = SDL_Linked_Version(); if ( SDL_VERSIONNUM(pVersion->major, pVersion->minor, pVersion->patch) < SDL_VERSIONNUM(1, 2, 14)) RTEnvSet("SDL_DISABLE_LOCK_KEYS", "1"); } #endif /* * the hostkey detection mode is unrelated to VM processing, so handle it before * we initialize anything COM related */ if (argc == 2 && ( !strcmp(argv[1], "-detecthostkey") || !strcmp(argv[1], "--detecthostkey"))) { int rc = SDL_InitSubSystem(SDL_INIT_VIDEO | SDL_INIT_TIMER | SDL_INIT_NOPARACHUTE); if (rc != 0) { RTPrintf("Error: SDL_InitSubSystem failed with message '%s'\n", SDL_GetError()); return 1; } /* we need a video window for the keyboard stuff to work */ if (!SDL_SetVideoMode(640, 480, 16, SDL_SWSURFACE)) { RTPrintf("Error: could not set SDL video mode\n"); return 1; } RTPrintf("Please hit one or two function key(s) to get the --hostkey value...\n"); SDL_Event event1; while (SDL_WaitEvent(&event1)) { if (event1.type == SDL_KEYDOWN) { SDL_Event event2; unsigned mod = SDL_GetModState() & ~(KMOD_MODE | KMOD_NUM | KMOD_RESERVED); while (SDL_WaitEvent(&event2)) { if (event2.type == SDL_KEYDOWN || event2.type == SDL_KEYUP) { /* pressed additional host key */ RTPrintf("--hostkey %d", event1.key.keysym.sym); if (event2.type == SDL_KEYDOWN) { RTPrintf(" %d", event2.key.keysym.sym); RTPrintf(" %d\n", SDL_GetModState() & ~(KMOD_MODE | KMOD_NUM | KMOD_RESERVED)); } else { RTPrintf(" %d\n", mod); } /* we're done */ break; } } /* we're down */ break; } } SDL_Quit(); return 1; } HRESULT rc; int vrc; Guid uuidVM; char *vmName = NULL; bool fSeparate = false; DeviceType_T bootDevice = DeviceType_Null; uint32_t memorySize = 0; uint32_t vramSize = 0; ComPtr pVBoxClientListener; ComPtr pVBoxListener; ComObjPtr pConsoleListener; bool fFullscreen = false; bool fResizable = true; #ifdef USE_XPCOM_QUEUE_THREAD bool fXPCOMEventThreadSignaled = false; #endif const char *pcszHdaFile = NULL; const char *pcszCdromFile = NULL; const char *pcszFdaFile = NULL; const char *pszPortVRDP = NULL; bool fDiscardState = false; const char *pcszSettingsPw = NULL; const char *pcszSettingsPwFile = NULL; #ifdef VBOX_SECURELABEL BOOL fSecureLabel = false; uint32_t secureLabelPointSize = 12; uint32_t secureLabelFontOffs = 0; char *secureLabelFontFile = NULL; uint32_t secureLabelColorFG = 0x0000FF00; uint32_t secureLabelColorBG = 0x00FFFF00; #endif #ifdef VBOXSDL_ADVANCED_OPTIONS unsigned fRawR0 = ~0U; unsigned fRawR3 = ~0U; unsigned fPATM = ~0U; unsigned fCSAM = ~0U; unsigned fHWVirt = ~0U; uint32_t u32WarpDrive = 0; #endif #ifdef VBOX_WIN32_UI bool fWin32UI = true; int64_t winId = 0; #endif bool fShowSDLConfig = false; uint32_t fixedWidth = ~(uint32_t)0; uint32_t fixedHeight = ~(uint32_t)0; uint32_t fixedBPP = ~(uint32_t)0; uint32_t uResizeWidth = ~(uint32_t)0; uint32_t uResizeHeight = ~(uint32_t)0; /* The damned GOTOs forces this to be up here - totally out of place. */ /* * Host key handling. * * The golden rule is that host-key combinations should not be seen * by the guest. For instance a CAD should not have any extra RCtrl down * and RCtrl up around itself. Nor should a resume be followed by a Ctrl-P * that could encourage applications to start printing. * * We must not confuse the hostkey processing into any release sequences * either, the host key is supposed to be explicitly pressing one key. * * Quick state diagram: * * host key down alone * (Normal) --------------- * ^ ^ | * | | v host combination key down * | | (Host key down) ---------------- * | | host key up v | | * | |-------------- | other key down v host combination key down * | | (host key used) ------------- * | | | ^ | * | (not host key)-- | |--------------- * | | | | | * | | ---- other | * | modifiers = 0 v v * ----------------------------------------------- */ enum HKEYSTATE { /** The initial and most common state, pass keystrokes to the guest. * Next state: HKEYSTATE_DOWN * Prev state: Any */ HKEYSTATE_NORMAL = 1, /** The first host key was pressed down */ HKEYSTATE_DOWN_1ST, /** The second host key was pressed down (if gHostKeySym2 != SDLK_UNKNOWN) */ HKEYSTATE_DOWN_2ND, /** The host key has been pressed down. * Prev state: HKEYSTATE_NORMAL * Next state: HKEYSTATE_NORMAL - host key up, capture toggle. * Next state: HKEYSTATE_USED - host key combination down. * Next state: HKEYSTATE_NOT_IT - non-host key combination down. */ HKEYSTATE_DOWN, /** A host key combination was pressed. * Prev state: HKEYSTATE_DOWN * Next state: HKEYSTATE_NORMAL - when modifiers are all 0 */ HKEYSTATE_USED, /** A non-host key combination was attempted. Send hostkey down to the * guest and continue until all modifiers have been released. * Prev state: HKEYSTATE_DOWN * Next state: HKEYSTATE_NORMAL - when modifiers are all 0 */ HKEYSTATE_NOT_IT } enmHKeyState = HKEYSTATE_NORMAL; /** The host key down event which we have been hiding from the guest. * Used when going from HKEYSTATE_DOWN to HKEYSTATE_NOT_IT. */ SDL_Event EvHKeyDown1; SDL_Event EvHKeyDown2; LogFlow(("SDL GUI started\n")); RTPrintf(VBOX_PRODUCT " SDL GUI version %s\n" "(C) 2005-" VBOX_C_YEAR " " VBOX_VENDOR "\n" "All rights reserved.\n\n", VBOX_VERSION_STRING); // less than one parameter is not possible if (argc < 2) { show_usage(); return 1; } // command line argument parsing stuff for (int curArg = 1; curArg < argc; curArg++) { if ( !strcmp(argv[curArg], "--vm") || !strcmp(argv[curArg], "-vm") || !strcmp(argv[curArg], "--startvm") || !strcmp(argv[curArg], "-startvm") || !strcmp(argv[curArg], "-s") ) { if (++curArg >= argc) { RTPrintf("Error: VM not specified (UUID or name)!\n"); return 1; } // first check if a UUID was supplied uuidVM = argv[curArg]; if (!uuidVM.isValid()) { LogFlow(("invalid UUID format, assuming it's a VM name\n")); vmName = argv[curArg]; } else if (uuidVM.isZero()) { RTPrintf("Error: UUID argument is zero!\n"); return 1; } } else if ( !strcmp(argv[curArg], "--separate") || !strcmp(argv[curArg], "-separate")) { fSeparate = true; } else if ( !strcmp(argv[curArg], "--comment") || !strcmp(argv[curArg], "-comment")) { if (++curArg >= argc) { RTPrintf("Error: missing argument for comment!\n"); return 1; } } else if ( !strcmp(argv[curArg], "--boot") || !strcmp(argv[curArg], "-boot")) { if (++curArg >= argc) { RTPrintf("Error: missing argument for boot drive!\n"); return 1; } switch (argv[curArg][0]) { case 'a': { bootDevice = DeviceType_Floppy; break; } case 'c': { bootDevice = DeviceType_HardDisk; break; } case 'd': { bootDevice = DeviceType_DVD; break; } case 'n': { bootDevice = DeviceType_Network; break; } default: { RTPrintf("Error: wrong argument for boot drive!\n"); return 1; } } } else if ( !strcmp(argv[curArg], "--detecthostkey") || !strcmp(argv[curArg], "-detecthostkey")) { RTPrintf("Error: please specify \"%s\" without any additional parameters!\n", argv[curArg]); return 1; } else if ( !strcmp(argv[curArg], "--memory") || !strcmp(argv[curArg], "-memory") || !strcmp(argv[curArg], "-m")) { if (++curArg >= argc) { RTPrintf("Error: missing argument for memory size!\n"); return 1; } memorySize = atoi(argv[curArg]); } else if ( !strcmp(argv[curArg], "--vram") || !strcmp(argv[curArg], "-vram")) { if (++curArg >= argc) { RTPrintf("Error: missing argument for vram size!\n"); return 1; } vramSize = atoi(argv[curArg]); } else if ( !strcmp(argv[curArg], "--fullscreen") || !strcmp(argv[curArg], "-fullscreen")) { fFullscreen = true; } else if ( !strcmp(argv[curArg], "--fullscreenresize") || !strcmp(argv[curArg], "-fullscreenresize")) { gfFullscreenResize = true; #ifdef VBOXSDL_WITH_X11 RTEnvSet("SDL_VIDEO_X11_VIDMODE", "0"); #endif } else if ( !strcmp(argv[curArg], "--fixedmode") || !strcmp(argv[curArg], "-fixedmode")) { /* three parameters follow */ if (curArg + 3 >= argc) { RTPrintf("Error: missing arguments for fixed video mode!\n"); return 1; } fixedWidth = atoi(argv[++curArg]); fixedHeight = atoi(argv[++curArg]); fixedBPP = atoi(argv[++curArg]); } else if ( !strcmp(argv[curArg], "--nofstoggle") || !strcmp(argv[curArg], "-nofstoggle")) { gfAllowFullscreenToggle = FALSE; } else if ( !strcmp(argv[curArg], "--noresize") || !strcmp(argv[curArg], "-noresize")) { fResizable = false; } else if ( !strcmp(argv[curArg], "--nohostkey") || !strcmp(argv[curArg], "-nohostkey")) { gHostKeyMod = 0; gHostKeySym1 = 0; } else if ( !strcmp(argv[curArg], "--nohostkeys") || !strcmp(argv[curArg], "-nohostkeys")) { if (++curArg >= argc) { RTPrintf("Error: missing a string of disabled hostkey combinations\n"); return 1; } gHostKeyDisabledCombinations = argv[curArg]; size_t cch = strlen(gHostKeyDisabledCombinations); for (size_t i = 0; i < cch; i++) { if (!strchr("fhnpqrs", gHostKeyDisabledCombinations[i])) { RTPrintf("Error: + '%c' is not a valid combination\n", gHostKeyDisabledCombinations[i]); return 1; } } } else if ( !strcmp(argv[curArg], "--nograbonclick") || !strcmp(argv[curArg], "-nograbonclick")) { gfGrabOnMouseClick = FALSE; } else if ( !strcmp(argv[curArg], "--termacpi") || !strcmp(argv[curArg], "-termacpi")) { gfACPITerm = TRUE; } else if ( !strcmp(argv[curArg], "--pidfile") || !strcmp(argv[curArg], "-pidfile")) { if (++curArg >= argc) { RTPrintf("Error: missing file name for --pidfile!\n"); return 1; } gpszPidFile = argv[curArg]; } else if ( !strcmp(argv[curArg], "--hda") || !strcmp(argv[curArg], "-hda")) { if (++curArg >= argc) { RTPrintf("Error: missing file name for first hard disk!\n"); return 1; } /* resolve it. */ if (RTPathExists(argv[curArg])) pcszHdaFile = RTPathRealDup(argv[curArg]); if (!pcszHdaFile) { RTPrintf("Error: The path to the specified harddisk, '%s', could not be resolved.\n", argv[curArg]); return 1; } } else if ( !strcmp(argv[curArg], "--fda") || !strcmp(argv[curArg], "-fda")) { if (++curArg >= argc) { RTPrintf("Error: missing file/device name for first floppy disk!\n"); return 1; } /* resolve it. */ if (RTPathExists(argv[curArg])) pcszFdaFile = RTPathRealDup(argv[curArg]); if (!pcszFdaFile) { RTPrintf("Error: The path to the specified floppy disk, '%s', could not be resolved.\n", argv[curArg]); return 1; } } else if ( !strcmp(argv[curArg], "--cdrom") || !strcmp(argv[curArg], "-cdrom")) { if (++curArg >= argc) { RTPrintf("Error: missing file/device name for cdrom!\n"); return 1; } /* resolve it. */ if (RTPathExists(argv[curArg])) pcszCdromFile = RTPathRealDup(argv[curArg]); if (!pcszCdromFile) { RTPrintf("Error: The path to the specified cdrom, '%s', could not be resolved.\n", argv[curArg]); return 1; } } else if ( !strcmp(argv[curArg], "--vrdp") || !strcmp(argv[curArg], "-vrdp")) { // start with the standard VRDP port pszPortVRDP = "0"; // is there another argument if (argc > (curArg + 1)) { curArg++; pszPortVRDP = argv[curArg]; LogFlow(("Using non standard VRDP port %s\n", pszPortVRDP)); } } else if ( !strcmp(argv[curArg], "--discardstate") || !strcmp(argv[curArg], "-discardstate")) { fDiscardState = true; } else if (!strcmp(argv[curArg], "--settingspw")) { if (++curArg >= argc) { RTPrintf("Error: missing password"); return 1; } pcszSettingsPw = argv[curArg]; } else if (!strcmp(argv[curArg], "--settingspwfile")) { if (++curArg >= argc) { RTPrintf("Error: missing password file\n"); return 1; } pcszSettingsPwFile = argv[curArg]; } #ifdef VBOX_SECURELABEL else if ( !strcmp(argv[curArg], "--securelabel") || !strcmp(argv[curArg], "-securelabel")) { fSecureLabel = true; LogFlow(("Secure labelling turned on\n")); } else if ( !strcmp(argv[curArg], "--seclabelfnt") || !strcmp(argv[curArg], "-seclabelfnt")) { if (++curArg >= argc) { RTPrintf("Error: missing font file name for secure label!\n"); return 1; } secureLabelFontFile = argv[curArg]; } else if ( !strcmp(argv[curArg], "--seclabelsiz") || !strcmp(argv[curArg], "-seclabelsiz")) { if (++curArg >= argc) { RTPrintf("Error: missing font point size for secure label!\n"); return 1; } secureLabelPointSize = atoi(argv[curArg]); } else if ( !strcmp(argv[curArg], "--seclabelofs") || !strcmp(argv[curArg], "-seclabelofs")) { if (++curArg >= argc) { RTPrintf("Error: missing font pixel offset for secure label!\n"); return 1; } secureLabelFontOffs = atoi(argv[curArg]); } else if ( !strcmp(argv[curArg], "--seclabelfgcol") || !strcmp(argv[curArg], "-seclabelfgcol")) { if (++curArg >= argc) { RTPrintf("Error: missing text color value for secure label!\n"); return 1; } sscanf(argv[curArg], "%X", &secureLabelColorFG); } else if ( !strcmp(argv[curArg], "--seclabelbgcol") || !strcmp(argv[curArg], "-seclabelbgcol")) { if (++curArg >= argc) { RTPrintf("Error: missing background color value for secure label!\n"); return 1; } sscanf(argv[curArg], "%X", &secureLabelColorBG); } #endif #ifdef VBOXSDL_ADVANCED_OPTIONS else if ( !strcmp(argv[curArg], "--rawr0") || !strcmp(argv[curArg], "-rawr0")) fRawR0 = true; else if ( !strcmp(argv[curArg], "--norawr0") || !strcmp(argv[curArg], "-norawr0")) fRawR0 = false; else if ( !strcmp(argv[curArg], "--rawr3") || !strcmp(argv[curArg], "-rawr3")) fRawR3 = true; else if ( !strcmp(argv[curArg], "--norawr3") || !strcmp(argv[curArg], "-norawr3")) fRawR3 = false; else if ( !strcmp(argv[curArg], "--patm") || !strcmp(argv[curArg], "-patm")) fPATM = true; else if ( !strcmp(argv[curArg], "--nopatm") || !strcmp(argv[curArg], "-nopatm")) fPATM = false; else if ( !strcmp(argv[curArg], "--csam") || !strcmp(argv[curArg], "-csam")) fCSAM = true; else if ( !strcmp(argv[curArg], "--nocsam") || !strcmp(argv[curArg], "-nocsam")) fCSAM = false; else if ( !strcmp(argv[curArg], "--hwvirtex") || !strcmp(argv[curArg], "-hwvirtex")) fHWVirt = true; else if ( !strcmp(argv[curArg], "--nohwvirtex") || !strcmp(argv[curArg], "-nohwvirtex")) fHWVirt = false; else if ( !strcmp(argv[curArg], "--warpdrive") || !strcmp(argv[curArg], "-warpdrive")) { if (++curArg >= argc) { RTPrintf("Error: missing the rate value for the --warpdrive option!\n"); return 1; } u32WarpDrive = RTStrToUInt32(argv[curArg]); if (u32WarpDrive < 2 || u32WarpDrive > 20000) { RTPrintf("Error: the warp drive rate is restricted to [2..20000]. (%d)\n", u32WarpDrive); return 1; } } #endif /* VBOXSDL_ADVANCED_OPTIONS */ #ifdef VBOX_WIN32_UI else if ( !strcmp(argv[curArg], "--win32ui") || !strcmp(argv[curArg], "-win32ui")) fWin32UI = true; #endif else if ( !strcmp(argv[curArg], "--showsdlconfig") || !strcmp(argv[curArg], "-showsdlconfig")) fShowSDLConfig = true; else if ( !strcmp(argv[curArg], "--hostkey") || !strcmp(argv[curArg], "-hostkey")) { if (++curArg + 1 >= argc) { RTPrintf("Error: not enough arguments for host keys!\n"); return 1; } gHostKeySym1 = atoi(argv[curArg++]); if (curArg + 1 < argc && (argv[curArg+1][0] == '0' || atoi(argv[curArg+1]) > 0)) { /* two-key sequence as host key specified */ gHostKeySym2 = atoi(argv[curArg++]); } gHostKeyMod = atoi(argv[curArg]); } /* just show the help screen */ else { if ( strcmp(argv[curArg], "-h") && strcmp(argv[curArg], "-help") && strcmp(argv[curArg], "--help")) RTPrintf("Error: unrecognized switch '%s'\n", argv[curArg]); show_usage(); return 1; } } rc = com::Initialize(); #ifdef VBOX_WITH_XPCOM if (rc == NS_ERROR_FILE_ACCESS_DENIED) { char szHome[RTPATH_MAX] = ""; com::GetVBoxUserHomeDirectory(szHome, sizeof(szHome)); RTPrintf("Failed to initialize COM because the global settings directory '%s' is not accessible!\n", szHome); return 1; } #endif if (FAILED(rc)) { RTPrintf("Error: COM initialization failed (rc=%Rhrc)!\n", rc); return 1; } /* NOTE: do not convert the following scope to a "do {} while (0);", as * this would make it all too tempting to use "break;" incorrectly - it * would skip over the cleanup. */ { // scopes all the stuff till shutdown //////////////////////////////////////////////////////////////////////////// ComPtr pVirtualBoxClient; ComPtr pVirtualBox; ComPtr pSession; bool sessionOpened = false; NativeEventQueue* eventQ = com::NativeEventQueue::getMainEventQueue(); ComPtr pMachine; rc = pVirtualBoxClient.createInprocObject(CLSID_VirtualBoxClient); if (FAILED(rc)) { com::ErrorInfo info; if (info.isFullAvailable()) PrintError("Failed to create VirtualBoxClient object", info.getText().raw(), info.getComponent().raw()); else RTPrintf("Failed to create VirtualBoxClient object! No error information available (rc=%Rhrc).\n", rc); goto leave; } rc = pVirtualBoxClient->COMGETTER(VirtualBox)(pVirtualBox.asOutParam()); if (FAILED(rc)) { RTPrintf("Failed to get VirtualBox object (rc=%Rhrc)!\n", rc); goto leave; } rc = pVirtualBoxClient->COMGETTER(Session)(pSession.asOutParam()); if (FAILED(rc)) { RTPrintf("Failed to get session object (rc=%Rhrc)!\n", rc); goto leave; } if (pcszSettingsPw) { CHECK_ERROR(pVirtualBox, SetSettingsSecret(Bstr(pcszSettingsPw).raw())); if (FAILED(rc)) goto leave; } else if (pcszSettingsPwFile) { int rcExit = settingsPasswordFile(pVirtualBox, pcszSettingsPwFile); if (rcExit != RTEXITCODE_SUCCESS) goto leave; } /* * Do we have a UUID? */ if (uuidVM.isValid()) { rc = pVirtualBox->FindMachine(uuidVM.toUtf16().raw(), pMachine.asOutParam()); if (FAILED(rc) || !pMachine) { RTPrintf("Error: machine with the given ID not found!\n"); goto leave; } } else if (vmName) { /* * Do we have a name but no UUID? */ rc = pVirtualBox->FindMachine(Bstr(vmName).raw(), pMachine.asOutParam()); if ((rc == S_OK) && pMachine) { Bstr bstrId; pMachine->COMGETTER(Id)(bstrId.asOutParam()); uuidVM = Guid(bstrId); } else { RTPrintf("Error: machine with the given name not found!\n"); RTPrintf("Check if this VM has been corrupted and is now inaccessible."); goto leave; } } /* create SDL event semaphore */ vrc = RTSemEventCreate(&g_EventSemSDLEvents); AssertReleaseRC(vrc); rc = pVirtualBoxClient->CheckMachineError(pMachine); if (FAILED(rc)) { com::ErrorInfo info; if (info.isFullAvailable()) PrintError("The VM has errors", info.getText().raw(), info.getComponent().raw()); else RTPrintf("Failed to check for VM errors! No error information available (rc=%Rhrc).\n", rc); goto leave; } if (fSeparate) { MachineState_T machineState = MachineState_Null; pMachine->COMGETTER(State)(&machineState); if ( machineState == MachineState_Running || machineState == MachineState_Teleporting || machineState == MachineState_LiveSnapshotting || machineState == MachineState_Paused || machineState == MachineState_TeleportingPausedVM ) { RTPrintf("VM is already running.\n"); } else { ComPtr progress; rc = pMachine->LaunchVMProcess(pSession, Bstr("headless").raw(), NULL, progress.asOutParam()); if (SUCCEEDED(rc) && !progress.isNull()) { RTPrintf("Waiting for VM to power on...\n"); rc = progress->WaitForCompletion(-1); if (SUCCEEDED(rc)) { BOOL completed = true; rc = progress->COMGETTER(Completed)(&completed); if (SUCCEEDED(rc)) { LONG iRc; rc = progress->COMGETTER(ResultCode)(&iRc); if (SUCCEEDED(rc)) { if (FAILED(iRc)) { ProgressErrorInfo info(progress); com::GluePrintErrorInfo(info); } else { RTPrintf("VM has been successfully started.\n"); /* LaunchVMProcess obtains a shared lock on the machine. * Unlock it here, because the lock will be obtained below * in the common code path as for already running VM. */ pSession->UnlockMachine(); } } } } } } if (FAILED(rc)) { RTPrintf("Error: failed to power up VM! No error text available.\n"); goto leave; } rc = pMachine->LockMachine(pSession, LockType_Shared); } else { pSession->COMSETTER(Name)(Bstr("GUI/SDL").raw()); rc = pMachine->LockMachine(pSession, LockType_VM); } if (FAILED(rc)) { com::ErrorInfo info; if (info.isFullAvailable()) PrintError("Could not open VirtualBox session", info.getText().raw(), info.getComponent().raw()); goto leave; } if (!pSession) { RTPrintf("Could not open VirtualBox session!\n"); goto leave; } sessionOpened = true; // get the mutable VM we're dealing with pSession->COMGETTER(Machine)(gpMachine.asOutParam()); if (!gpMachine) { com::ErrorInfo info; if (info.isFullAvailable()) PrintError("Cannot start VM!", info.getText().raw(), info.getComponent().raw()); else RTPrintf("Error: given machine not found!\n"); goto leave; } // get the VM console pSession->COMGETTER(Console)(gpConsole.asOutParam()); if (!gpConsole) { RTPrintf("Given console not found!\n"); goto leave; } /* * Are we supposed to use a different hard disk file? */ if (pcszHdaFile) { ComPtr pMedium; /* * Strategy: if any registered hard disk points to the same file, * assign it. If not, register a new image and assign it to the VM. */ Bstr bstrHdaFile(pcszHdaFile); pVirtualBox->OpenMedium(bstrHdaFile.raw(), DeviceType_HardDisk, AccessMode_ReadWrite, FALSE /* fForceNewUuid */, pMedium.asOutParam()); if (!pMedium) { /* we've not found the image */ RTPrintf("Adding hard disk '%s'...\n", pcszHdaFile); pVirtualBox->OpenMedium(bstrHdaFile.raw(), DeviceType_HardDisk, AccessMode_ReadWrite, FALSE /* fForceNewUuid */, pMedium.asOutParam()); } /* do we have the right image now? */ if (pMedium) { Bstr bstrSCName; /* get the first IDE controller to attach the harddisk to * and if there is none, add one temporarily */ { ComPtr pStorageCtl; com::SafeIfaceArray aStorageControllers; CHECK_ERROR(gpMachine, COMGETTER(StorageControllers)(ComSafeArrayAsOutParam(aStorageControllers))); for (size_t i = 0; i < aStorageControllers.size(); ++ i) { StorageBus_T storageBus = StorageBus_Null; CHECK_ERROR(aStorageControllers[i], COMGETTER(Bus)(&storageBus)); if (storageBus == StorageBus_IDE) { pStorageCtl = aStorageControllers[i]; break; } } if (pStorageCtl) { CHECK_ERROR(pStorageCtl, COMGETTER(Name)(bstrSCName.asOutParam())); gpMachine->DetachDevice(bstrSCName.raw(), 0, 0); } else { bstrSCName = "IDE Controller"; CHECK_ERROR(gpMachine, AddStorageController(bstrSCName.raw(), StorageBus_IDE, pStorageCtl.asOutParam())); } } CHECK_ERROR(gpMachine, AttachDevice(bstrSCName.raw(), 0, 0, DeviceType_HardDisk, pMedium)); /// @todo why is this attachment saved? } else { RTPrintf("Error: failed to mount the specified hard disk image!\n"); goto leave; } } /* * Mount a floppy if requested. */ if (pcszFdaFile) do { ComPtr pMedium; /* unmount? */ if (!strcmp(pcszFdaFile, "none")) { /* nothing to do, NULL object will cause unmount */ } else { Bstr bstrFdaFile(pcszFdaFile); /* Assume it's a host drive name */ ComPtr pHost; CHECK_ERROR_BREAK(pVirtualBox, COMGETTER(Host)(pHost.asOutParam())); rc = pHost->FindHostFloppyDrive(bstrFdaFile.raw(), pMedium.asOutParam()); if (FAILED(rc)) { /* try to find an existing one */ rc = pVirtualBox->OpenMedium(bstrFdaFile.raw(), DeviceType_Floppy, AccessMode_ReadWrite, FALSE /* fForceNewUuid */, pMedium.asOutParam()); if (FAILED(rc)) { /* try to add to the list */ RTPrintf("Adding floppy image '%s'...\n", pcszFdaFile); CHECK_ERROR_BREAK(pVirtualBox, OpenMedium(bstrFdaFile.raw(), DeviceType_Floppy, AccessMode_ReadWrite, FALSE /* fForceNewUuid */, pMedium.asOutParam())); } } } Bstr bstrSCName; /* get the first floppy controller to attach the floppy to * and if there is none, add one temporarily */ { ComPtr pStorageCtl; com::SafeIfaceArray aStorageControllers; CHECK_ERROR(gpMachine, COMGETTER(StorageControllers)(ComSafeArrayAsOutParam(aStorageControllers))); for (size_t i = 0; i < aStorageControllers.size(); ++ i) { StorageBus_T storageBus = StorageBus_Null; CHECK_ERROR(aStorageControllers[i], COMGETTER(Bus)(&storageBus)); if (storageBus == StorageBus_Floppy) { pStorageCtl = aStorageControllers[i]; break; } } if (pStorageCtl) { CHECK_ERROR(pStorageCtl, COMGETTER(Name)(bstrSCName.asOutParam())); gpMachine->DetachDevice(bstrSCName.raw(), 0, 0); } else { bstrSCName = "Floppy Controller"; CHECK_ERROR(gpMachine, AddStorageController(bstrSCName.raw(), StorageBus_Floppy, pStorageCtl.asOutParam())); } } CHECK_ERROR(gpMachine, AttachDevice(bstrSCName.raw(), 0, 0, DeviceType_Floppy, pMedium)); } while (0); if (FAILED(rc)) goto leave; /* * Mount a CD-ROM if requested. */ if (pcszCdromFile) do { ComPtr pMedium; /* unmount? */ if (!strcmp(pcszCdromFile, "none")) { /* nothing to do, NULL object will cause unmount */ } else { Bstr bstrCdromFile(pcszCdromFile); /* Assume it's a host drive name */ ComPtr pHost; CHECK_ERROR_BREAK(pVirtualBox, COMGETTER(Host)(pHost.asOutParam())); rc = pHost->FindHostDVDDrive(bstrCdromFile.raw(), pMedium.asOutParam()); if (FAILED(rc)) { /* try to find an existing one */ rc = pVirtualBox->OpenMedium(bstrCdromFile.raw(), DeviceType_DVD, AccessMode_ReadWrite, FALSE /* fForceNewUuid */, pMedium.asOutParam()); if (FAILED(rc)) { /* try to add to the list */ RTPrintf("Adding ISO image '%s'...\n", pcszCdromFile); CHECK_ERROR_BREAK(pVirtualBox, OpenMedium(bstrCdromFile.raw(), DeviceType_DVD, AccessMode_ReadWrite, FALSE /* fForceNewUuid */, pMedium.asOutParam())); } } } Bstr bstrSCName; /* get the first IDE controller to attach the DVD drive to * and if there is none, add one temporarily */ { ComPtr pStorageCtl; com::SafeIfaceArray aStorageControllers; CHECK_ERROR(gpMachine, COMGETTER(StorageControllers)(ComSafeArrayAsOutParam(aStorageControllers))); for (size_t i = 0; i < aStorageControllers.size(); ++ i) { StorageBus_T storageBus = StorageBus_Null; CHECK_ERROR(aStorageControllers[i], COMGETTER(Bus)(&storageBus)); if (storageBus == StorageBus_IDE) { pStorageCtl = aStorageControllers[i]; break; } } if (pStorageCtl) { CHECK_ERROR(pStorageCtl, COMGETTER(Name)(bstrSCName.asOutParam())); gpMachine->DetachDevice(bstrSCName.raw(), 1, 0); } else { bstrSCName = "IDE Controller"; CHECK_ERROR(gpMachine, AddStorageController(bstrSCName.raw(), StorageBus_IDE, pStorageCtl.asOutParam())); } } CHECK_ERROR(gpMachine, AttachDevice(bstrSCName.raw(), 1, 0, DeviceType_DVD, pMedium)); } while (0); if (FAILED(rc)) goto leave; if (fDiscardState) { /* * If the machine is currently saved, * discard the saved state first. */ MachineState_T machineState; gpMachine->COMGETTER(State)(&machineState); if (machineState == MachineState_Saved) { CHECK_ERROR(gpMachine, DiscardSavedState(true /* fDeleteFile */)); } /* * If there are snapshots, discard the current state, * i.e. revert to the last snapshot. */ ULONG cSnapshots; gpMachine->COMGETTER(SnapshotCount)(&cSnapshots); if (cSnapshots) { gpProgress = NULL; ComPtr pCurrentSnapshot; CHECK_ERROR(gpMachine, COMGETTER(CurrentSnapshot)(pCurrentSnapshot.asOutParam())); if (FAILED(rc)) goto leave; CHECK_ERROR(gpMachine, RestoreSnapshot(pCurrentSnapshot, gpProgress.asOutParam())); rc = gpProgress->WaitForCompletion(-1); } } // get the machine debugger (does not have to be there) gpConsole->COMGETTER(Debugger)(gpMachineDebugger.asOutParam()); if (gpMachineDebugger) { Log(("Machine debugger available!\n")); } gpConsole->COMGETTER(Display)(gpDisplay.asOutParam()); if (!gpDisplay) { RTPrintf("Error: could not get display object!\n"); goto leave; } // set the boot drive if (bootDevice != DeviceType_Null) { rc = gpMachine->SetBootOrder(1, bootDevice); if (rc != S_OK) { RTPrintf("Error: could not set boot device, using default.\n"); } } // set the memory size if not default if (memorySize) { rc = gpMachine->COMSETTER(MemorySize)(memorySize); if (rc != S_OK) { ULONG ramSize = 0; gpMachine->COMGETTER(MemorySize)(&ramSize); RTPrintf("Error: could not set memory size, using current setting of %d MBytes\n", ramSize); } } if (vramSize) { rc = gpMachine->COMSETTER(VRAMSize)(vramSize); if (rc != S_OK) { gpMachine->COMGETTER(VRAMSize)((ULONG*)&vramSize); RTPrintf("Error: could not set VRAM size, using current setting of %d MBytes\n", vramSize); } } // we're always able to process absolute mouse events and we prefer that gfAbsoluteMouseHost = TRUE; #ifdef VBOX_WIN32_UI if (fWin32UI) { /* initialize the Win32 user interface inside which SDL will be embedded */ if (initUI(fResizable, winId)) return 1; } #endif /* static initialization of the SDL stuff */ if (!VBoxSDLFB::init(fShowSDLConfig)) goto leave; gpMachine->COMGETTER(MonitorCount)(&gcMonitors); if (gcMonitors > 64) gcMonitors = 64; for (unsigned i = 0; i < gcMonitors; i++) { // create our SDL framebuffer instance gpFramebuffer[i].createObject(); rc = gpFramebuffer[i]->init(i, fFullscreen, fResizable, fShowSDLConfig, false, fixedWidth, fixedHeight, fixedBPP, fSeparate); if (FAILED(rc)) { RTPrintf("Error: could not create framebuffer object!\n"); goto leave; } } #ifdef VBOX_WIN32_UI gpFramebuffer[0]->setWinId(winId); #endif for (unsigned i = 0; i < gcMonitors; i++) { if (!gpFramebuffer[i]->initialized()) goto leave; gpFramebuffer[i]->AddRef(); if (fFullscreen) SetFullscreen(true); } #ifdef VBOX_SECURELABEL if (fSecureLabel) { if (!secureLabelFontFile) { RTPrintf("Error: no font file specified for secure label!\n"); goto leave; } /* load the SDL_ttf library and get the required imports */ vrc = RTLdrLoadSystem(LIBSDL_TTF_NAME, true /*fNoUnload*/, &gLibrarySDL_ttf); if (RT_SUCCESS(vrc)) vrc = RTLdrGetSymbol(gLibrarySDL_ttf, "TTF_Init", (void**)&pTTF_Init); if (RT_SUCCESS(vrc)) vrc = RTLdrGetSymbol(gLibrarySDL_ttf, "TTF_OpenFont", (void**)&pTTF_OpenFont); if (RT_SUCCESS(vrc)) vrc = RTLdrGetSymbol(gLibrarySDL_ttf, "TTF_RenderUTF8_Solid", (void**)&pTTF_RenderUTF8_Solid); if (RT_SUCCESS(vrc)) { /* silently ignore errors here */ vrc = RTLdrGetSymbol(gLibrarySDL_ttf, "TTF_RenderUTF8_Blended", (void**)&pTTF_RenderUTF8_Blended); if (RT_FAILURE(vrc)) pTTF_RenderUTF8_Blended = NULL; vrc = VINF_SUCCESS; } if (RT_SUCCESS(vrc)) vrc = RTLdrGetSymbol(gLibrarySDL_ttf, "TTF_CloseFont", (void**)&pTTF_CloseFont); if (RT_SUCCESS(vrc)) vrc = RTLdrGetSymbol(gLibrarySDL_ttf, "TTF_Quit", (void**)&pTTF_Quit); if (RT_SUCCESS(vrc)) vrc = gpFramebuffer[0]->initSecureLabel(SECURE_LABEL_HEIGHT, secureLabelFontFile, secureLabelPointSize, secureLabelFontOffs); if (RT_FAILURE(vrc)) { RTPrintf("Error: could not initialize secure labeling: rc = %Rrc\n", vrc); goto leave; } Bstr bstrLabel; gpMachine->GetExtraData(Bstr(VBOXSDL_SECURELABEL_EXTRADATA).raw(), bstrLabel.asOutParam()); Utf8Str labelUtf8(bstrLabel); /* * Now update the label */ gpFramebuffer[0]->setSecureLabelColor(secureLabelColorFG, secureLabelColorBG); gpFramebuffer[0]->setSecureLabelText(labelUtf8.c_str()); } #endif #ifdef VBOXSDL_WITH_X11 /* NOTE1: We still want Ctrl-C to work, so we undo the SDL redirections. * NOTE2: We have to remove the PidFile if this file exists. */ signal(SIGINT, signal_handler_SIGINT); signal(SIGQUIT, signal_handler_SIGINT); signal(SIGSEGV, signal_handler_SIGINT); #endif for (ULONG i = 0; i < gcMonitors; i++) { // register our framebuffer rc = gpDisplay->AttachFramebuffer(i, gpFramebuffer[i], gaFramebufferId[i].asOutParam()); if (FAILED(rc)) { RTPrintf("Error: could not register framebuffer object!\n"); goto leave; } ULONG dummy; LONG xOrigin, yOrigin; GuestMonitorStatus_T monitorStatus; rc = gpDisplay->GetScreenResolution(i, &dummy, &dummy, &dummy, &xOrigin, &yOrigin, &monitorStatus); gpFramebuffer[i]->setOrigin(xOrigin, yOrigin); } { // register listener for VirtualBoxClient events ComPtr pES; CHECK_ERROR(pVirtualBoxClient, COMGETTER(EventSource)(pES.asOutParam())); ComObjPtr listener; listener.createObject(); listener->init(new VBoxSDLClientEventListener()); pVBoxClientListener = listener; com::SafeArray eventTypes; eventTypes.push_back(VBoxEventType_OnVBoxSVCAvailabilityChanged); CHECK_ERROR(pES, RegisterListener(pVBoxClientListener, ComSafeArrayAsInParam(eventTypes), true)); } { // register listener for VirtualBox (server) events ComPtr pES; CHECK_ERROR(pVirtualBox, COMGETTER(EventSource)(pES.asOutParam())); ComObjPtr listener; listener.createObject(); listener->init(new VBoxSDLEventListener()); pVBoxListener = listener; com::SafeArray eventTypes; eventTypes.push_back(VBoxEventType_OnExtraDataChanged); CHECK_ERROR(pES, RegisterListener(pVBoxListener, ComSafeArrayAsInParam(eventTypes), true)); } { // register listener for Console events ComPtr pES; CHECK_ERROR(gpConsole, COMGETTER(EventSource)(pES.asOutParam())); pConsoleListener.createObject(); pConsoleListener->init(new VBoxSDLConsoleEventListener()); com::SafeArray eventTypes; eventTypes.push_back(VBoxEventType_OnMousePointerShapeChanged); eventTypes.push_back(VBoxEventType_OnMouseCapabilityChanged); eventTypes.push_back(VBoxEventType_OnKeyboardLedsChanged); eventTypes.push_back(VBoxEventType_OnStateChanged); eventTypes.push_back(VBoxEventType_OnRuntimeError); eventTypes.push_back(VBoxEventType_OnCanShowWindow); eventTypes.push_back(VBoxEventType_OnShowWindow); CHECK_ERROR(pES, RegisterListener(pConsoleListener, ComSafeArrayAsInParam(eventTypes), true)); // until we've tried to to start the VM, ignore power off events pConsoleListener->getWrapped()->ignorePowerOffEvents(true); } if (pszPortVRDP) { rc = gpMachine->COMGETTER(VRDEServer)(gpVRDEServer.asOutParam()); AssertMsg((rc == S_OK) && gpVRDEServer, ("Could not get VRDP Server! rc = 0x%x\n", rc)); if (gpVRDEServer) { // has a non standard VRDP port been requested? if (strcmp(pszPortVRDP, "0")) { rc = gpVRDEServer->SetVRDEProperty(Bstr("TCP/Ports").raw(), Bstr(pszPortVRDP).raw()); if (rc != S_OK) { RTPrintf("Error: could not set VRDP port! rc = 0x%x\n", rc); goto leave; } } // now enable VRDP rc = gpVRDEServer->COMSETTER(Enabled)(TRUE); if (rc != S_OK) { RTPrintf("Error: could not enable VRDP server! rc = 0x%x\n", rc); goto leave; } } } rc = E_FAIL; #ifdef VBOXSDL_ADVANCED_OPTIONS if (fRawR0 != ~0U) { if (!gpMachineDebugger) { RTPrintf("Error: No debugger object; -%srawr0 cannot be executed!\n", fRawR0 ? "" : "no"); goto leave; } gpMachineDebugger->COMSETTER(RecompileSupervisor)(!fRawR0); } if (fRawR3 != ~0U) { if (!gpMachineDebugger) { RTPrintf("Error: No debugger object; -%srawr3 cannot be executed!\n", fRawR3 ? "" : "no"); goto leave; } gpMachineDebugger->COMSETTER(RecompileUser)(!fRawR3); } if (fPATM != ~0U) { if (!gpMachineDebugger) { RTPrintf("Error: No debugger object; -%spatm cannot be executed!\n", fPATM ? "" : "no"); goto leave; } gpMachineDebugger->COMSETTER(PATMEnabled)(fPATM); } if (fCSAM != ~0U) { if (!gpMachineDebugger) { RTPrintf("Error: No debugger object; -%scsam cannot be executed!\n", fCSAM ? "" : "no"); goto leave; } gpMachineDebugger->COMSETTER(CSAMEnabled)(fCSAM); } if (fHWVirt != ~0U) { gpMachine->SetHWVirtExProperty(HWVirtExPropertyType_Enabled, fHWVirt); } if (u32WarpDrive != 0) { if (!gpMachineDebugger) { RTPrintf("Error: No debugger object; --warpdrive %d cannot be executed!\n", u32WarpDrive); goto leave; } gpMachineDebugger->COMSETTER(VirtualTimeRate)(u32WarpDrive); } #endif /* VBOXSDL_ADVANCED_OPTIONS */ /* start with something in the titlebar */ UpdateTitlebar(TITLEBAR_NORMAL); /* memorize the default cursor */ gpDefaultCursor = SDL_GetCursor(); #if !defined(VBOX_WITH_SDL13) # if defined(VBOXSDL_WITH_X11) /* Get Window Manager info. We only need the X11 display. */ SDL_VERSION(&gSdlInfo.version); if (!SDL_GetWMInfo(&gSdlInfo)) RTPrintf("Error: could not get SDL Window Manager info -- no Xcursor support!\n"); else gfXCursorEnabled = TRUE; # if !defined(VBOX_WITHOUT_XCURSOR) /* SDL uses its own (plain) default cursor. Use the left arrow cursor instead which might look * much better if a mouse cursor theme is installed. */ if (gfXCursorEnabled) { gpDefaultOrigX11Cursor = *(Cursor*)gpDefaultCursor->wm_cursor; *(Cursor*)gpDefaultCursor->wm_cursor = XCreateFontCursor(gSdlInfo.info.x11.display, XC_left_ptr); SDL_SetCursor(gpDefaultCursor); } # endif /* Initialise the keyboard */ X11DRV_InitKeyboard(gSdlInfo.info.x11.display, NULL, NULL, NULL, NULL); # endif /* VBOXSDL_WITH_X11 */ /* create a fake empty cursor */ { uint8_t cursorData[1] = {0}; gpCustomCursor = SDL_CreateCursor(cursorData, cursorData, 8, 1, 0, 0); gpCustomOrigWMcursor = gpCustomCursor->wm_cursor; gpCustomCursor->wm_cursor = NULL; } #endif /* !VBOX_WITH_SDL13 */ /* * Register our user signal handler. */ #ifdef VBOXSDL_WITH_X11 struct sigaction sa; sa.sa_sigaction = signal_handler_SIGUSR1; sigemptyset(&sa.sa_mask); sa.sa_flags = SA_RESTART | SA_SIGINFO; sigaction(SIGUSR1, &sa, NULL); #endif /* VBOXSDL_WITH_X11 */ /* * Start the VM execution thread. This has to be done * asynchronously as powering up can take some time * (accessing devices such as the host DVD drive). In * the meantime, we have to service the SDL event loop. */ SDL_Event event; if (!fSeparate) { LogFlow(("Powering up the VM...\n")); rc = gpConsole->PowerUp(gpProgress.asOutParam()); if (rc != S_OK) { com::ErrorInfo info(gpConsole, COM_IIDOF(IConsole)); if (info.isBasicAvailable()) PrintError("Failed to power up VM", info.getText().raw()); else RTPrintf("Error: failed to power up VM! No error text available.\n"); goto leave; } } #ifdef USE_XPCOM_QUEUE_THREAD /* * Before we starting to do stuff, we have to launch the XPCOM * event queue thread. It will wait for events and send messages * to the SDL thread. After having done this, we should fairly * quickly start to process the SDL event queue as an XPCOM * event storm might arrive. Stupid SDL has a ridiculously small * event queue buffer! */ startXPCOMEventQueueThread(eventQ->getSelectFD()); #endif /* USE_XPCOM_QUEUE_THREAD */ /* termination flag */ bool fTerminateDuringStartup; fTerminateDuringStartup = false; LogRel(("VBoxSDL: NUM lock initially %s, CAPS lock initially %s\n", !!(SDL_GetModState() & KMOD_NUM) ? "ON" : "OFF", !!(SDL_GetModState() & KMOD_CAPS) ? "ON" : "OFF")); /* start regular timer so we don't starve in the event loop */ SDL_TimerID sdlTimer; sdlTimer = SDL_AddTimer(100, StartupTimer, NULL); /* loop until the powerup processing is done */ MachineState_T machineState; do { rc = gpMachine->COMGETTER(State)(&machineState); if ( rc == S_OK && ( machineState == MachineState_Starting || machineState == MachineState_Restoring || machineState == MachineState_TeleportingIn ) ) { /* * wait for the next event. This is uncritical as * power up guarantees to change the machine state * to either running or aborted and a machine state * change will send us an event. However, we have to * service the XPCOM event queue! */ #ifdef USE_XPCOM_QUEUE_THREAD if (!fXPCOMEventThreadSignaled) { signalXPCOMEventQueueThread(); fXPCOMEventThreadSignaled = true; } #endif /* * Wait for SDL events. */ if (WaitSDLEvent(&event)) { switch (event.type) { /* * Timer event. Used to have the titlebar updated. */ case SDL_USER_EVENT_TIMER: { /* * Update the title bar. */ UpdateTitlebar(TITLEBAR_STARTUP); break; } /* * User specific framebuffer change event. */ case SDL_USER_EVENT_NOTIFYCHANGE: { LogFlow(("SDL_USER_EVENT_NOTIFYCHANGE\n")); LONG xOrigin, yOrigin; gpFramebuffer[event.user.code]->notifyChange(event.user.code); /* update xOrigin, yOrigin -> mouse */ ULONG dummy; GuestMonitorStatus_T monitorStatus; rc = gpDisplay->GetScreenResolution(event.user.code, &dummy, &dummy, &dummy, &xOrigin, &yOrigin, &monitorStatus); gpFramebuffer[event.user.code]->setOrigin(xOrigin, yOrigin); break; } #ifdef USE_XPCOM_QUEUE_THREAD /* * User specific XPCOM event queue event */ case SDL_USER_EVENT_XPCOM_EVENTQUEUE: { LogFlow(("SDL_USER_EVENT_XPCOM_EVENTQUEUE: processing XPCOM event queue...\n")); eventQ->processEventQueue(0); signalXPCOMEventQueueThread(); break; } #endif /* USE_XPCOM_QUEUE_THREAD */ /* * Termination event from the on state change callback. */ case SDL_USER_EVENT_TERMINATE: { if (event.user.code != VBOXSDL_TERM_NORMAL) { com::ProgressErrorInfo info(gpProgress); if (info.isBasicAvailable()) PrintError("Failed to power up VM", info.getText().raw()); else RTPrintf("Error: failed to power up VM! No error text available.\n"); } fTerminateDuringStartup = true; break; } default: { Log8(("VBoxSDL: Unknown SDL event %d (pre)\n", event.type)); break; } } } } eventQ->processEventQueue(0); } while ( rc == S_OK && ( machineState == MachineState_Starting || machineState == MachineState_Restoring || machineState == MachineState_TeleportingIn ) ); /* kill the timer again */ SDL_RemoveTimer(sdlTimer); sdlTimer = 0; /* are we supposed to terminate the process? */ if (fTerminateDuringStartup) goto leave; /* did the power up succeed? */ if (machineState != MachineState_Running) { com::ProgressErrorInfo info(gpProgress); if (info.isBasicAvailable()) PrintError("Failed to power up VM", info.getText().raw()); else RTPrintf("Error: failed to power up VM! No error text available (rc = 0x%x state = %d)\n", rc, machineState); goto leave; } // accept power off events from now on because we're running // note that there's a possible race condition here... pConsoleListener->getWrapped()->ignorePowerOffEvents(false); rc = gpConsole->COMGETTER(Keyboard)(gpKeyboard.asOutParam()); if (!gpKeyboard) { RTPrintf("Error: could not get keyboard object!\n"); goto leave; } gpConsole->COMGETTER(Mouse)(gpMouse.asOutParam()); if (!gpMouse) { RTPrintf("Error: could not get mouse object!\n"); goto leave; } if (fSeparate && gpMouse) { LogFlow(("Fetching mouse caps\n")); /* Fetch current mouse status, etc */ gpMouse->COMGETTER(AbsoluteSupported)(&gfAbsoluteMouseGuest); gpMouse->COMGETTER(RelativeSupported)(&gfRelativeMouseGuest); gpMouse->COMGETTER(NeedsHostCursor)(&gfGuestNeedsHostCursor); HandleGuestCapsChanged(); ComPtr mps; gpMouse->COMGETTER(PointerShape)(mps.asOutParam()); if (!mps.isNull()) { BOOL visible, alpha; ULONG hotX, hotY, width, height; com::SafeArray shape; mps->COMGETTER(Visible)(&visible); mps->COMGETTER(Alpha)(&alpha); mps->COMGETTER(HotX)(&hotX); mps->COMGETTER(HotY)(&hotY); mps->COMGETTER(Width)(&width); mps->COMGETTER(Height)(&height); mps->COMGETTER(Shape)(ComSafeArrayAsOutParam(shape)); if (shape.size() > 0) { PointerShapeChangeData data(visible, alpha, hotX, hotY, width, height, ComSafeArrayAsInParam(shape)); SetPointerShape(&data); } } } UpdateTitlebar(TITLEBAR_NORMAL); /* * Enable keyboard repeats */ SDL_EnableKeyRepeat(SDL_DEFAULT_REPEAT_DELAY, SDL_DEFAULT_REPEAT_INTERVAL); /* * Create PID file. */ if (gpszPidFile) { char szBuf[32]; const char *pcszLf = "\n"; RTFILE PidFile; RTFileOpen(&PidFile, gpszPidFile, RTFILE_O_WRITE | RTFILE_O_CREATE_REPLACE | RTFILE_O_DENY_NONE); RTStrFormatNumber(szBuf, RTProcSelf(), 10, 0, 0, 0); RTFileWrite(PidFile, szBuf, strlen(szBuf), NULL); RTFileWrite(PidFile, pcszLf, strlen(pcszLf), NULL); RTFileClose(PidFile); } /* * Main event loop */ #ifdef USE_XPCOM_QUEUE_THREAD if (!fXPCOMEventThreadSignaled) { signalXPCOMEventQueueThread(); } #endif LogFlow(("VBoxSDL: Entering big event loop\n")); while (WaitSDLEvent(&event)) { switch (event.type) { /* * The screen needs to be repainted. */ #ifdef VBOX_WITH_SDL13 case SDL_WINDOWEVENT: { switch (event.window.event) { case SDL_WINDOWEVENT_EXPOSED: { VBoxSDLFB *fb = getFbFromWinId(event.window.windowID); if (fb) fb->repaint(); break; } case SDL_WINDOWEVENT_FOCUS_GAINED: { break; } default: break; } } #else case SDL_VIDEOEXPOSE: { gpFramebuffer[0]->repaint(); break; } #endif /* * Keyboard events. */ case SDL_KEYDOWN: case SDL_KEYUP: { SDLKey ksym = event.key.keysym.sym; switch (enmHKeyState) { case HKEYSTATE_NORMAL: { if ( event.type == SDL_KEYDOWN && ksym != SDLK_UNKNOWN && (ksym == gHostKeySym1 || ksym == gHostKeySym2)) { EvHKeyDown1 = event; enmHKeyState = ksym == gHostKeySym1 ? HKEYSTATE_DOWN_1ST : HKEYSTATE_DOWN_2ND; break; } ProcessKey(&event.key); break; } case HKEYSTATE_DOWN_1ST: case HKEYSTATE_DOWN_2ND: { if (gHostKeySym2 != SDLK_UNKNOWN) { if ( event.type == SDL_KEYDOWN && ksym != SDLK_UNKNOWN && ( (enmHKeyState == HKEYSTATE_DOWN_1ST && ksym == gHostKeySym2) || (enmHKeyState == HKEYSTATE_DOWN_2ND && ksym == gHostKeySym1))) { EvHKeyDown2 = event; enmHKeyState = HKEYSTATE_DOWN; break; } enmHKeyState = event.type == SDL_KEYUP ? HKEYSTATE_NORMAL : HKEYSTATE_NOT_IT; ProcessKey(&EvHKeyDown1.key); /* ugly hack: Some guests (e.g. mstsc.exe on Windows XP) * expect a small delay between two key events. 5ms work * reliable here so use 10ms to be on the safe side. A * better but more complicated fix would be to introduce * a new state and don't wait here. */ RTThreadSleep(10); ProcessKey(&event.key); break; } /* fall through if no two-key sequence is used */ } case HKEYSTATE_DOWN: { if (event.type == SDL_KEYDOWN) { /* potential host key combination, try execute it */ int irc = HandleHostKey(&event.key); if (irc == VINF_SUCCESS) { enmHKeyState = HKEYSTATE_USED; break; } if (RT_SUCCESS(irc)) goto leave; } else /* SDL_KEYUP */ { if ( ksym != SDLK_UNKNOWN && (ksym == gHostKeySym1 || ksym == gHostKeySym2)) { /* toggle grabbing state */ if (!gfGrabbed) InputGrabStart(); else InputGrabEnd(); /* SDL doesn't always reset the keystates, correct it */ ResetKeys(); enmHKeyState = HKEYSTATE_NORMAL; break; } } /* not host key */ enmHKeyState = HKEYSTATE_NOT_IT; ProcessKey(&EvHKeyDown1.key); /* see the comment for the 2-key case above */ RTThreadSleep(10); if (gHostKeySym2 != SDLK_UNKNOWN) { ProcessKey(&EvHKeyDown2.key); /* see the comment for the 2-key case above */ RTThreadSleep(10); } ProcessKey(&event.key); break; } case HKEYSTATE_USED: { if ((SDL_GetModState() & ~(KMOD_MODE | KMOD_NUM | KMOD_RESERVED)) == 0) enmHKeyState = HKEYSTATE_NORMAL; if (event.type == SDL_KEYDOWN) { int irc = HandleHostKey(&event.key); if (RT_SUCCESS(irc) && irc != VINF_SUCCESS) goto leave; } break; } default: AssertMsgFailed(("enmHKeyState=%d\n", enmHKeyState)); /* fall thru */ case HKEYSTATE_NOT_IT: { if ((SDL_GetModState() & ~(KMOD_MODE | KMOD_NUM | KMOD_RESERVED)) == 0) enmHKeyState = HKEYSTATE_NORMAL; ProcessKey(&event.key); break; } } /* state switch */ break; } /* * The window was closed. */ case SDL_QUIT: { if (!gfACPITerm || gSdlQuitTimer) goto leave; if (gpConsole) gpConsole->PowerButton(); gSdlQuitTimer = SDL_AddTimer(1000, QuitTimer, NULL); break; } /* * The mouse has moved */ case SDL_MOUSEMOTION: { if (gfGrabbed || UseAbsoluteMouse()) { VBoxSDLFB *fb; #ifdef VBOX_WITH_SDL13 fb = getFbFromWinId(event.motion.windowID); #else fb = gpFramebuffer[0]; #endif SendMouseEvent(fb, 0, 0, 0); } break; } /* * A mouse button has been clicked or released. */ case SDL_MOUSEBUTTONDOWN: case SDL_MOUSEBUTTONUP: { SDL_MouseButtonEvent *bev = &event.button; /* don't grab on mouse click if we have guest additions */ if (!gfGrabbed && !UseAbsoluteMouse() && gfGrabOnMouseClick) { if (event.type == SDL_MOUSEBUTTONDOWN && (bev->state & SDL_BUTTON_LMASK)) { /* start grabbing all events */ InputGrabStart(); } } else if (gfGrabbed || UseAbsoluteMouse()) { int dz = bev->button == SDL_BUTTON_WHEELUP ? -1 : bev->button == SDL_BUTTON_WHEELDOWN ? +1 : 0; /* end host key combination (CTRL+MouseButton) */ switch (enmHKeyState) { case HKEYSTATE_DOWN_1ST: case HKEYSTATE_DOWN_2ND: enmHKeyState = HKEYSTATE_NOT_IT; ProcessKey(&EvHKeyDown1.key); /* ugly hack: small delay to ensure that the key event is * actually handled _prior_ to the mouse click event */ RTThreadSleep(20); break; case HKEYSTATE_DOWN: enmHKeyState = HKEYSTATE_NOT_IT; ProcessKey(&EvHKeyDown1.key); if (gHostKeySym2 != SDLK_UNKNOWN) ProcessKey(&EvHKeyDown2.key); /* ugly hack: small delay to ensure that the key event is * actually handled _prior_ to the mouse click event */ RTThreadSleep(20); break; default: break; } VBoxSDLFB *fb; #ifdef VBOX_WITH_SDL13 fb = getFbFromWinId(event.button.windowID); #else fb = gpFramebuffer[0]; #endif SendMouseEvent(fb, dz, event.type == SDL_MOUSEBUTTONDOWN, bev->button); } break; } /* * The window has gained or lost focus. */ case SDL_ACTIVEEVENT: { /* * There is a strange behaviour in SDL when running without a window * manager: When SDL_WM_GrabInput(SDL_GRAB_ON) is called we receive two * consecutive events SDL_ACTIVEEVENTs (input lost, input gained). * Asking SDL_GetAppState() seems the better choice. */ if (gfGrabbed && (SDL_GetAppState() & SDL_APPINPUTFOCUS) == 0) { /* * another window has stolen the (keyboard) input focus */ InputGrabEnd(); } break; } /* * The SDL window was resized */ case SDL_VIDEORESIZE: { if (gpDisplay) { if (gfIgnoreNextResize) { gfIgnoreNextResize = FALSE; break; } uResizeWidth = event.resize.w; #ifdef VBOX_SECURELABEL if (fSecureLabel) uResizeHeight = RT_MAX(0, event.resize.h - SECURE_LABEL_HEIGHT); else #endif uResizeHeight = event.resize.h; if (gSdlResizeTimer) SDL_RemoveTimer(gSdlResizeTimer); gSdlResizeTimer = SDL_AddTimer(300, ResizeTimer, NULL); } break; } /* * User specific update event. */ /** @todo use a common user event handler so that SDL_PeepEvents() won't * possibly remove other events in the queue! */ case SDL_USER_EVENT_UPDATERECT: { /* * Decode event parameters. */ ASMAtomicDecS32(&g_cNotifyUpdateEventsPending); #define DECODEX(event) (int)((intptr_t)(event).user.data1 >> 16) #define DECODEY(event) (int)((intptr_t)(event).user.data1 & 0xFFFF) #define DECODEW(event) (int)((intptr_t)(event).user.data2 >> 16) #define DECODEH(event) (int)((intptr_t)(event).user.data2 & 0xFFFF) int x = DECODEX(event); int y = DECODEY(event); int w = DECODEW(event); int h = DECODEH(event); LogFlow(("SDL_USER_EVENT_UPDATERECT: x = %d, y = %d, w = %d, h = %d\n", x, y, w, h)); Assert(gpFramebuffer[event.user.code]); gpFramebuffer[event.user.code]->update(x, y, w, h, true /* fGuestRelative */); #undef DECODEX #undef DECODEY #undef DECODEW #undef DECODEH break; } /* * User event: Window resize done */ case SDL_USER_EVENT_WINDOW_RESIZE_DONE: { /** * @todo This is a workaround for synchronization problems between EMT and the * SDL main thread. It can happen that the SDL thread already starts a * new resize operation while the EMT is still busy with the old one * leading to a deadlock. Therefore we call SetVideoModeHint only once * when the mouse button was released. */ /* communicate the resize event to the guest */ gpDisplay->SetVideoModeHint(0 /*=display*/, true /*=enabled*/, false /*=changeOrigin*/, 0 /*=originX*/, 0 /*=originY*/, uResizeWidth, uResizeHeight, 0 /*=don't change bpp*/); break; } /* * User specific framebuffer change event. */ case SDL_USER_EVENT_NOTIFYCHANGE: { LogFlow(("SDL_USER_EVENT_NOTIFYCHANGE\n")); LONG xOrigin, yOrigin; gpFramebuffer[event.user.code]->notifyChange(event.user.code); /* update xOrigin, yOrigin -> mouse */ ULONG dummy; GuestMonitorStatus_T monitorStatus; rc = gpDisplay->GetScreenResolution(event.user.code, &dummy, &dummy, &dummy, &xOrigin, &yOrigin, &monitorStatus); gpFramebuffer[event.user.code]->setOrigin(xOrigin, yOrigin); break; } #ifdef USE_XPCOM_QUEUE_THREAD /* * User specific XPCOM event queue event */ case SDL_USER_EVENT_XPCOM_EVENTQUEUE: { LogFlow(("SDL_USER_EVENT_XPCOM_EVENTQUEUE: processing XPCOM event queue...\n")); eventQ->processEventQueue(0); signalXPCOMEventQueueThread(); break; } #endif /* USE_XPCOM_QUEUE_THREAD */ /* * User specific update title bar notification event */ case SDL_USER_EVENT_UPDATE_TITLEBAR: { UpdateTitlebar(TITLEBAR_NORMAL); break; } /* * User specific termination event */ case SDL_USER_EVENT_TERMINATE: { if (event.user.code != VBOXSDL_TERM_NORMAL) RTPrintf("Error: VM terminated abnormally!\n"); goto leave; } #ifdef VBOX_SECURELABEL /* * User specific secure label update event */ case SDL_USER_EVENT_SECURELABEL_UPDATE: { /* * Query the new label text */ Bstr bstrLabel; gpMachine->GetExtraData(Bstr(VBOXSDL_SECURELABEL_EXTRADATA).raw(), bstrLabel.asOutParam()); Utf8Str labelUtf8(bstrLabel); /* * Now update the label */ gpFramebuffer[0]->setSecureLabelText(labelUtf8.c_str()); break; } #endif /* VBOX_SECURELABEL */ /* * User specific pointer shape change event */ case SDL_USER_EVENT_POINTER_CHANGE: { PointerShapeChangeData *data = (PointerShapeChangeData *)event.user.data1; SetPointerShape (data); delete data; break; } /* * User specific guest capabilities changed */ case SDL_USER_EVENT_GUEST_CAP_CHANGED: { HandleGuestCapsChanged(); break; } default: { Log8(("unknown SDL event %d\n", event.type)); break; } } } leave: if (gpszPidFile) RTFileDelete(gpszPidFile); LogFlow(("leaving...\n")); #if defined(VBOX_WITH_XPCOM) && !defined(RT_OS_DARWIN) && !defined(RT_OS_OS2) /* make sure the XPCOM event queue thread doesn't do anything harmful */ terminateXPCOMQueueThread(); #endif /* VBOX_WITH_XPCOM */ if (gpVRDEServer) rc = gpVRDEServer->COMSETTER(Enabled)(FALSE); /* * Get the machine state. */ if (gpMachine) gpMachine->COMGETTER(State)(&machineState); else machineState = MachineState_Aborted; if (!fSeparate) { /* * Turn off the VM if it's running */ if ( gpConsole && ( machineState == MachineState_Running || machineState == MachineState_Teleporting || machineState == MachineState_LiveSnapshotting /** @todo power off paused VMs too? */ ) ) do { pConsoleListener->getWrapped()->ignorePowerOffEvents(true); ComPtr pProgress; CHECK_ERROR_BREAK(gpConsole, PowerDown(pProgress.asOutParam())); CHECK_ERROR_BREAK(pProgress, WaitForCompletion(-1)); BOOL completed; CHECK_ERROR_BREAK(pProgress, COMGETTER(Completed)(&completed)); ASSERT(completed); LONG hrc; CHECK_ERROR_BREAK(pProgress, COMGETTER(ResultCode)(&hrc)); if (FAILED(hrc)) { com::ErrorInfo info; if (info.isFullAvailable()) PrintError("Failed to power down VM", info.getText().raw(), info.getComponent().raw()); else RTPrintf("Failed to power down virtual machine! No error information available (rc = 0x%x).\n", hrc); break; } } while (0); } /* unregister Console listener */ if (pConsoleListener) { ComPtr pES; CHECK_ERROR(gpConsole, COMGETTER(EventSource)(pES.asOutParam())); if (!pES.isNull()) CHECK_ERROR(pES, UnregisterListener(pConsoleListener)); pConsoleListener.setNull(); } /* * Now we discard all settings so that our changes will * not be flushed to the permanent configuration */ if ( gpMachine && machineState != MachineState_Saved) { rc = gpMachine->DiscardSettings(); AssertMsg(SUCCEEDED(rc), ("DiscardSettings %Rhrc, machineState %d\n", rc, machineState)); } /* close the session */ if (sessionOpened) { rc = pSession->UnlockMachine(); AssertComRC(rc); } #ifndef VBOX_WITH_SDL13 /* restore the default cursor and free the custom one if any */ if (gpDefaultCursor) { # ifdef VBOXSDL_WITH_X11 Cursor pDefaultTempX11Cursor = 0; if (gfXCursorEnabled) { pDefaultTempX11Cursor = *(Cursor*)gpDefaultCursor->wm_cursor; *(Cursor*)gpDefaultCursor->wm_cursor = gpDefaultOrigX11Cursor; } # endif /* VBOXSDL_WITH_X11 */ SDL_SetCursor(gpDefaultCursor); # if defined(VBOXSDL_WITH_X11) && !defined(VBOX_WITHOUT_XCURSOR) if (gfXCursorEnabled) XFreeCursor(gSdlInfo.info.x11.display, pDefaultTempX11Cursor); # endif /* VBOXSDL_WITH_X11 && !VBOX_WITHOUT_XCURSOR */ } if (gpCustomCursor) { WMcursor *pCustomTempWMCursor = gpCustomCursor->wm_cursor; gpCustomCursor->wm_cursor = gpCustomOrigWMcursor; SDL_FreeCursor(gpCustomCursor); if (pCustomTempWMCursor) { # if defined(RT_OS_WINDOWS) ::DestroyCursor(*(HCURSOR *)pCustomTempWMCursor); # elif defined(VBOXSDL_WITH_X11) && !defined(VBOX_WITHOUT_XCURSOR) if (gfXCursorEnabled) XFreeCursor(gSdlInfo.info.x11.display, *(Cursor *)pCustomTempWMCursor); # endif /* VBOXSDL_WITH_X11 && !VBOX_WITHOUT_XCURSOR */ free(pCustomTempWMCursor); } } #endif LogFlow(("Releasing mouse, keyboard, remote desktop server, display, console...\n")); if (gpDisplay) { for (unsigned i = 0; i < gcMonitors; i++) gpDisplay->DetachFramebuffer(i, gaFramebufferId[i].raw()); } gpMouse = NULL; gpKeyboard = NULL; gpVRDEServer = NULL; gpDisplay = NULL; gpConsole = NULL; gpMachineDebugger = NULL; gpProgress = NULL; // we can only uninitialize SDL here because it is not threadsafe for (unsigned i = 0; i < gcMonitors; i++) { if (gpFramebuffer[i]) { LogFlow(("Releasing framebuffer...\n")); gpFramebuffer[i]->Release(); gpFramebuffer[i] = NULL; } } VBoxSDLFB::uninit(); #ifdef VBOX_SECURELABEL /* must do this after destructing the framebuffer */ if (gLibrarySDL_ttf) RTLdrClose(gLibrarySDL_ttf); #endif /* VirtualBox (server) listener unregistration. */ if (pVBoxListener) { ComPtr pES; CHECK_ERROR(pVirtualBox, COMGETTER(EventSource)(pES.asOutParam())); if (!pES.isNull()) CHECK_ERROR(pES, UnregisterListener(pVBoxListener)); pVBoxListener.setNull(); } /* VirtualBoxClient listener unregistration. */ if (pVBoxClientListener) { ComPtr pES; CHECK_ERROR(pVirtualBoxClient, COMGETTER(EventSource)(pES.asOutParam())); if (!pES.isNull()) CHECK_ERROR(pES, UnregisterListener(pVBoxClientListener)); pVBoxClientListener.setNull(); } LogFlow(("Releasing machine, session...\n")); gpMachine = NULL; pSession = NULL; LogFlow(("Releasing VirtualBox object...\n")); pVirtualBox = NULL; LogFlow(("Releasing VirtualBoxClient object...\n")); pVirtualBoxClient = NULL; // end "all-stuff" scope //////////////////////////////////////////////////////////////////////////// } /* Must be before com::Shutdown() */ LogFlow(("Uninitializing COM...\n")); com::Shutdown(); LogFlow(("Returning from main()!\n")); RTLogFlush(NULL); return FAILED(rc) ? 1 : 0; } static RTEXITCODE readPasswordFile(const char *pszFilename, com::Utf8Str *pPasswd) { size_t cbFile; char szPasswd[512]; int vrc = VINF_SUCCESS; RTEXITCODE rcExit = RTEXITCODE_SUCCESS; bool fStdIn = !strcmp(pszFilename, "stdin"); PRTSTREAM pStrm; if (!fStdIn) vrc = RTStrmOpen(pszFilename, "r", &pStrm); else pStrm = g_pStdIn; if (RT_SUCCESS(vrc)) { vrc = RTStrmReadEx(pStrm, szPasswd, sizeof(szPasswd)-1, &cbFile); if (RT_SUCCESS(vrc)) { if (cbFile >= sizeof(szPasswd)-1) { RTPrintf("Provided password in file '%s' is too long\n", pszFilename); rcExit = RTEXITCODE_FAILURE; } else { unsigned i; for (i = 0; i < cbFile && !RT_C_IS_CNTRL(szPasswd[i]); i++) ; szPasswd[i] = '\0'; *pPasswd = szPasswd; } } else { RTPrintf("Cannot read password from file '%s': %Rrc\n", pszFilename, vrc); rcExit = RTEXITCODE_FAILURE; } if (!fStdIn) RTStrmClose(pStrm); } else { RTPrintf("Cannot open password file '%s' (%Rrc)\n", pszFilename, vrc); rcExit = RTEXITCODE_FAILURE; } return rcExit; } static RTEXITCODE settingsPasswordFile(ComPtr virtualBox, const char *pszFilename) { com::Utf8Str passwd; RTEXITCODE rcExit = readPasswordFile(pszFilename, &passwd); if (rcExit == RTEXITCODE_SUCCESS) { int rc; CHECK_ERROR(virtualBox, SetSettingsSecret(com::Bstr(passwd).raw())); if (FAILED(rc)) rcExit = RTEXITCODE_FAILURE; } return rcExit; } #ifndef VBOX_WITH_HARDENING /** * Main entry point */ int main(int argc, char **argv) { #ifdef Q_WS_X11 if (!XInitThreads()) return 1; #endif /* * Before we do *anything*, we initialize the runtime. */ int rc = RTR3InitExe(argc, &argv, RTR3INIT_FLAGS_SUPLIB); if (RT_FAILURE(rc)) return RTMsgInitFailure(rc); return TrustedMain(argc, argv, NULL); } #endif /* !VBOX_WITH_HARDENING */ /** * Returns whether the absolute mouse is in use, i.e. both host * and guest have opted to enable it. * * @returns bool Flag whether the absolute mouse is in use */ static bool UseAbsoluteMouse(void) { return (gfAbsoluteMouseHost && gfAbsoluteMouseGuest); } #if defined(RT_OS_DARWIN) || defined(RT_OS_OS2) /** * Fallback keycode conversion using SDL symbols. * * This is used to catch keycodes that's missing from the translation table. * * @returns XT scancode * @param ev SDL scancode */ static uint16_t Keyevent2KeycodeFallback(const SDL_KeyboardEvent *ev) { const SDLKey sym = ev->keysym.sym; Log(("SDL key event: sym=%d scancode=%#x unicode=%#x\n", sym, ev->keysym.scancode, ev->keysym.unicode)); switch (sym) { /* set 1 scan code */ case SDLK_ESCAPE: return 0x01; case SDLK_EXCLAIM: case SDLK_1: return 0x02; case SDLK_AT: case SDLK_2: return 0x03; case SDLK_HASH: case SDLK_3: return 0x04; case SDLK_DOLLAR: case SDLK_4: return 0x05; /* % */ case SDLK_5: return 0x06; case SDLK_CARET: case SDLK_6: return 0x07; case SDLK_AMPERSAND: case SDLK_7: return 0x08; case SDLK_ASTERISK: case SDLK_8: return 0x09; case SDLK_LEFTPAREN: case SDLK_9: return 0x0a; case SDLK_RIGHTPAREN: case SDLK_0: return 0x0b; case SDLK_UNDERSCORE: case SDLK_MINUS: return 0x0c; case SDLK_EQUALS: case SDLK_PLUS: return 0x0d; case SDLK_BACKSPACE: return 0x0e; case SDLK_TAB: return 0x0f; case SDLK_q: return 0x10; case SDLK_w: return 0x11; case SDLK_e: return 0x12; case SDLK_r: return 0x13; case SDLK_t: return 0x14; case SDLK_y: return 0x15; case SDLK_u: return 0x16; case SDLK_i: return 0x17; case SDLK_o: return 0x18; case SDLK_p: return 0x19; case SDLK_LEFTBRACKET: return 0x1a; case SDLK_RIGHTBRACKET: return 0x1b; case SDLK_RETURN: return 0x1c; case SDLK_KP_ENTER: return 0x1c | 0x100; case SDLK_LCTRL: return 0x1d; case SDLK_RCTRL: return 0x1d | 0x100; case SDLK_a: return 0x1e; case SDLK_s: return 0x1f; case SDLK_d: return 0x20; case SDLK_f: return 0x21; case SDLK_g: return 0x22; case SDLK_h: return 0x23; case SDLK_j: return 0x24; case SDLK_k: return 0x25; case SDLK_l: return 0x26; case SDLK_COLON: case SDLK_SEMICOLON: return 0x27; case SDLK_QUOTEDBL: case SDLK_QUOTE: return 0x28; case SDLK_BACKQUOTE: return 0x29; case SDLK_LSHIFT: return 0x2a; case SDLK_BACKSLASH: return 0x2b; case SDLK_z: return 0x2c; case SDLK_x: return 0x2d; case SDLK_c: return 0x2e; case SDLK_v: return 0x2f; case SDLK_b: return 0x30; case SDLK_n: return 0x31; case SDLK_m: return 0x32; case SDLK_LESS: case SDLK_COMMA: return 0x33; case SDLK_GREATER: case SDLK_PERIOD: return 0x34; case SDLK_KP_DIVIDE: /*??*/ case SDLK_QUESTION: case SDLK_SLASH: return 0x35; case SDLK_RSHIFT: return 0x36; case SDLK_KP_MULTIPLY: case SDLK_PRINT: return 0x37; /* fixme */ case SDLK_LALT: return 0x38; case SDLK_MODE: /* alt gr*/ case SDLK_RALT: return 0x38 | 0x100; case SDLK_SPACE: return 0x39; case SDLK_CAPSLOCK: return 0x3a; case SDLK_F1: return 0x3b; case SDLK_F2: return 0x3c; case SDLK_F3: return 0x3d; case SDLK_F4: return 0x3e; case SDLK_F5: return 0x3f; case SDLK_F6: return 0x40; case SDLK_F7: return 0x41; case SDLK_F8: return 0x42; case SDLK_F9: return 0x43; case SDLK_F10: return 0x44; case SDLK_PAUSE: return 0x45; /* not right */ case SDLK_NUMLOCK: return 0x45; case SDLK_SCROLLOCK: return 0x46; case SDLK_KP7: return 0x47; case SDLK_HOME: return 0x47 | 0x100; case SDLK_KP8: return 0x48; case SDLK_UP: return 0x48 | 0x100; case SDLK_KP9: return 0x49; case SDLK_PAGEUP: return 0x49 | 0x100; case SDLK_KP_MINUS: return 0x4a; case SDLK_KP4: return 0x4b; case SDLK_LEFT: return 0x4b | 0x100; case SDLK_KP5: return 0x4c; case SDLK_KP6: return 0x4d; case SDLK_RIGHT: return 0x4d | 0x100; case SDLK_KP_PLUS: return 0x4e; case SDLK_KP1: return 0x4f; case SDLK_END: return 0x4f | 0x100; case SDLK_KP2: return 0x50; case SDLK_DOWN: return 0x50 | 0x100; case SDLK_KP3: return 0x51; case SDLK_PAGEDOWN: return 0x51 | 0x100; case SDLK_KP0: return 0x52; case SDLK_INSERT: return 0x52 | 0x100; case SDLK_KP_PERIOD: return 0x53; case SDLK_DELETE: return 0x53 | 0x100; case SDLK_SYSREQ: return 0x54; case SDLK_F11: return 0x57; case SDLK_F12: return 0x58; case SDLK_F13: return 0x5b; case SDLK_LMETA: case SDLK_LSUPER: return 0x5b | 0x100; case SDLK_F14: return 0x5c; case SDLK_RMETA: case SDLK_RSUPER: return 0x5c | 0x100; case SDLK_F15: return 0x5d; case SDLK_MENU: return 0x5d | 0x100; #if 0 case SDLK_CLEAR: return 0x; case SDLK_KP_EQUALS: return 0x; case SDLK_COMPOSE: return 0x; case SDLK_HELP: return 0x; case SDLK_BREAK: return 0x; case SDLK_POWER: return 0x; case SDLK_EURO: return 0x; case SDLK_UNDO: return 0x; #endif default: Log(("Unhandled sdl key event: sym=%d scancode=%#x unicode=%#x\n", ev->keysym.sym, ev->keysym.scancode, ev->keysym.unicode)); return 0; } } #endif /* RT_OS_DARWIN */ /** * Converts an SDL keyboard eventcode to a XT scancode. * * @returns XT scancode * @param ev SDL scancode */ static uint16_t Keyevent2Keycode(const SDL_KeyboardEvent *ev) { // start with the scancode determined by SDL int keycode = ev->keysym.scancode; #ifdef VBOXSDL_WITH_X11 # ifdef VBOX_WITH_SDL13 switch (ev->keysym.sym) { case SDLK_ESCAPE: return 0x01; case SDLK_EXCLAIM: case SDLK_1: return 0x02; case SDLK_AT: case SDLK_2: return 0x03; case SDLK_HASH: case SDLK_3: return 0x04; case SDLK_DOLLAR: case SDLK_4: return 0x05; /* % */ case SDLK_5: return 0x06; case SDLK_CARET: case SDLK_6: return 0x07; case SDLK_AMPERSAND: case SDLK_7: return 0x08; case SDLK_ASTERISK: case SDLK_8: return 0x09; case SDLK_LEFTPAREN: case SDLK_9: return 0x0a; case SDLK_RIGHTPAREN: case SDLK_0: return 0x0b; case SDLK_UNDERSCORE: case SDLK_MINUS: return 0x0c; case SDLK_PLUS: return 0x0d; case SDLK_BACKSPACE: return 0x0e; case SDLK_TAB: return 0x0f; case SDLK_q: return 0x10; case SDLK_w: return 0x11; case SDLK_e: return 0x12; case SDLK_r: return 0x13; case SDLK_t: return 0x14; case SDLK_y: return 0x15; case SDLK_u: return 0x16; case SDLK_i: return 0x17; case SDLK_o: return 0x18; case SDLK_p: return 0x19; case SDLK_RETURN: return 0x1c; case SDLK_KP_ENTER: return 0x1c | 0x100; case SDLK_LCTRL: return 0x1d; case SDLK_RCTRL: return 0x1d | 0x100; case SDLK_a: return 0x1e; case SDLK_s: return 0x1f; case SDLK_d: return 0x20; case SDLK_f: return 0x21; case SDLK_g: return 0x22; case SDLK_h: return 0x23; case SDLK_j: return 0x24; case SDLK_k: return 0x25; case SDLK_l: return 0x26; case SDLK_COLON: return 0x27; case SDLK_QUOTEDBL: case SDLK_QUOTE: return 0x28; case SDLK_BACKQUOTE: return 0x29; case SDLK_LSHIFT: return 0x2a; case SDLK_z: return 0x2c; case SDLK_x: return 0x2d; case SDLK_c: return 0x2e; case SDLK_v: return 0x2f; case SDLK_b: return 0x30; case SDLK_n: return 0x31; case SDLK_m: return 0x32; case SDLK_LESS: return 0x33; case SDLK_GREATER: return 0x34; case SDLK_KP_DIVIDE: /*??*/ case SDLK_QUESTION: return 0x35; case SDLK_RSHIFT: return 0x36; case SDLK_KP_MULTIPLY: case SDLK_PRINT: return 0x37; /* fixme */ case SDLK_LALT: return 0x38; case SDLK_MODE: /* alt gr*/ case SDLK_RALT: return 0x38 | 0x100; case SDLK_SPACE: return 0x39; case SDLK_CAPSLOCK: return 0x3a; case SDLK_F1: return 0x3b; case SDLK_F2: return 0x3c; case SDLK_F3: return 0x3d; case SDLK_F4: return 0x3e; case SDLK_F5: return 0x3f; case SDLK_F6: return 0x40; case SDLK_F7: return 0x41; case SDLK_F8: return 0x42; case SDLK_F9: return 0x43; case SDLK_F10: return 0x44; case SDLK_PAUSE: return 0x45; /* not right */ case SDLK_NUMLOCK: return 0x45; case SDLK_SCROLLOCK: return 0x46; case SDLK_KP7: return 0x47; case SDLK_HOME: return 0x47 | 0x100; case SDLK_KP8: return 0x48; case SDLK_UP: return 0x48 | 0x100; case SDLK_KP9: return 0x49; case SDLK_PAGEUP: return 0x49 | 0x100; case SDLK_KP_MINUS: return 0x4a; case SDLK_KP4: return 0x4b; case SDLK_LEFT: return 0x4b | 0x100; case SDLK_KP5: return 0x4c; case SDLK_KP6: return 0x4d; case SDLK_RIGHT: return 0x4d | 0x100; case SDLK_KP_PLUS: return 0x4e; case SDLK_KP1: return 0x4f; case SDLK_END: return 0x4f | 0x100; case SDLK_KP2: return 0x50; case SDLK_DOWN: return 0x50 | 0x100; case SDLK_KP3: return 0x51; case SDLK_PAGEDOWN: return 0x51 | 0x100; case SDLK_KP0: return 0x52; case SDLK_INSERT: return 0x52 | 0x100; case SDLK_KP_PERIOD: return 0x53; case SDLK_DELETE: return 0x53 | 0x100; case SDLK_SYSREQ: return 0x54; case SDLK_F11: return 0x57; case SDLK_F12: return 0x58; case SDLK_F13: return 0x5b; case SDLK_F14: return 0x5c; case SDLK_F15: return 0x5d; case SDLK_MENU: return 0x5d | 0x100; default: return 0; } # else keycode = X11DRV_KeyEvent(gSdlInfo.info.x11.display, keycode); # endif #elif defined(RT_OS_DARWIN) /* This is derived partially from SDL_QuartzKeys.h and partially from testing. */ static const uint16_t s_aMacToSet1[] = { /* set-1 SDL_QuartzKeys.h */ 0x1e, /* QZ_a 0x00 */ 0x1f, /* QZ_s 0x01 */ 0x20, /* QZ_d 0x02 */ 0x21, /* QZ_f 0x03 */ 0x23, /* QZ_h 0x04 */ 0x22, /* QZ_g 0x05 */ 0x2c, /* QZ_z 0x06 */ 0x2d, /* QZ_x 0x07 */ 0x2e, /* QZ_c 0x08 */ 0x2f, /* QZ_v 0x09 */ 0x56, /* between lshift and z. 'INT 1'? */ 0x30, /* QZ_b 0x0B */ 0x10, /* QZ_q 0x0C */ 0x11, /* QZ_w 0x0D */ 0x12, /* QZ_e 0x0E */ 0x13, /* QZ_r 0x0F */ 0x15, /* QZ_y 0x10 */ 0x14, /* QZ_t 0x11 */ 0x02, /* QZ_1 0x12 */ 0x03, /* QZ_2 0x13 */ 0x04, /* QZ_3 0x14 */ 0x05, /* QZ_4 0x15 */ 0x07, /* QZ_6 0x16 */ 0x06, /* QZ_5 0x17 */ 0x0d, /* QZ_EQUALS 0x18 */ 0x0a, /* QZ_9 0x19 */ 0x08, /* QZ_7 0x1A */ 0x0c, /* QZ_MINUS 0x1B */ 0x09, /* QZ_8 0x1C */ 0x0b, /* QZ_0 0x1D */ 0x1b, /* QZ_RIGHTBRACKET 0x1E */ 0x18, /* QZ_o 0x1F */ 0x16, /* QZ_u 0x20 */ 0x1a, /* QZ_LEFTBRACKET 0x21 */ 0x17, /* QZ_i 0x22 */ 0x19, /* QZ_p 0x23 */ 0x1c, /* QZ_RETURN 0x24 */ 0x26, /* QZ_l 0x25 */ 0x24, /* QZ_j 0x26 */ 0x28, /* QZ_QUOTE 0x27 */ 0x25, /* QZ_k 0x28 */ 0x27, /* QZ_SEMICOLON 0x29 */ 0x2b, /* QZ_BACKSLASH 0x2A */ 0x33, /* QZ_COMMA 0x2B */ 0x35, /* QZ_SLASH 0x2C */ 0x31, /* QZ_n 0x2D */ 0x32, /* QZ_m 0x2E */ 0x34, /* QZ_PERIOD 0x2F */ 0x0f, /* QZ_TAB 0x30 */ 0x39, /* QZ_SPACE 0x31 */ 0x29, /* QZ_BACKQUOTE 0x32 */ 0x0e, /* QZ_BACKSPACE 0x33 */ 0x9c, /* QZ_IBOOK_ENTER 0x34 */ 0x01, /* QZ_ESCAPE 0x35 */ 0x5c|0x100, /* QZ_RMETA 0x36 */ 0x5b|0x100, /* QZ_LMETA 0x37 */ 0x2a, /* QZ_LSHIFT 0x38 */ 0x3a, /* QZ_CAPSLOCK 0x39 */ 0x38, /* QZ_LALT 0x3A */ 0x1d, /* QZ_LCTRL 0x3B */ 0x36, /* QZ_RSHIFT 0x3C */ 0x38|0x100, /* QZ_RALT 0x3D */ 0x1d|0x100, /* QZ_RCTRL 0x3E */ 0, /* */ 0, /* */ 0x53, /* QZ_KP_PERIOD 0x41 */ 0, /* */ 0x37, /* QZ_KP_MULTIPLY 0x43 */ 0, /* */ 0x4e, /* QZ_KP_PLUS 0x45 */ 0, /* */ 0x45, /* QZ_NUMLOCK 0x47 */ 0, /* */ 0, /* */ 0, /* */ 0x35|0x100, /* QZ_KP_DIVIDE 0x4B */ 0x1c|0x100, /* QZ_KP_ENTER 0x4C */ 0, /* */ 0x4a, /* QZ_KP_MINUS 0x4E */ 0, /* */ 0, /* */ 0x0d/*?*/, /* QZ_KP_EQUALS 0x51 */ 0x52, /* QZ_KP0 0x52 */ 0x4f, /* QZ_KP1 0x53 */ 0x50, /* QZ_KP2 0x54 */ 0x51, /* QZ_KP3 0x55 */ 0x4b, /* QZ_KP4 0x56 */ 0x4c, /* QZ_KP5 0x57 */ 0x4d, /* QZ_KP6 0x58 */ 0x47, /* QZ_KP7 0x59 */ 0, /* */ 0x48, /* QZ_KP8 0x5B */ 0x49, /* QZ_KP9 0x5C */ 0, /* */ 0, /* */ 0, /* */ 0x3f, /* QZ_F5 0x60 */ 0x40, /* QZ_F6 0x61 */ 0x41, /* QZ_F7 0x62 */ 0x3d, /* QZ_F3 0x63 */ 0x42, /* QZ_F8 0x64 */ 0x43, /* QZ_F9 0x65 */ 0, /* */ 0x57, /* QZ_F11 0x67 */ 0, /* */ 0x37|0x100, /* QZ_PRINT / F13 0x69 */ 0x63, /* QZ_F16 0x6A */ 0x46, /* QZ_SCROLLOCK 0x6B */ 0, /* */ 0x44, /* QZ_F10 0x6D */ 0x5d|0x100, /* */ 0x58, /* QZ_F12 0x6F */ 0, /* */ 0/* 0xe1,0x1d,0x45*/, /* QZ_PAUSE 0x71 */ 0x52|0x100, /* QZ_INSERT / HELP 0x72 */ 0x47|0x100, /* QZ_HOME 0x73 */ 0x49|0x100, /* QZ_PAGEUP 0x74 */ 0x53|0x100, /* QZ_DELETE 0x75 */ 0x3e, /* QZ_F4 0x76 */ 0x4f|0x100, /* QZ_END 0x77 */ 0x3c, /* QZ_F2 0x78 */ 0x51|0x100, /* QZ_PAGEDOWN 0x79 */ 0x3b, /* QZ_F1 0x7A */ 0x4b|0x100, /* QZ_LEFT 0x7B */ 0x4d|0x100, /* QZ_RIGHT 0x7C */ 0x50|0x100, /* QZ_DOWN 0x7D */ 0x48|0x100, /* QZ_UP 0x7E */ 0x5e|0x100, /* QZ_POWER 0x7F */ /* have different break key! */ }; if (keycode == 0) { /* This could be a modifier or it could be 'a'. */ switch (ev->keysym.sym) { case SDLK_LSHIFT: keycode = 0x2a; break; case SDLK_RSHIFT: keycode = 0x36; break; case SDLK_LCTRL: keycode = 0x1d; break; case SDLK_RCTRL: keycode = 0x1d | 0x100; break; case SDLK_LALT: keycode = 0x38; break; case SDLK_MODE: /* alt gr */ case SDLK_RALT: keycode = 0x38 | 0x100; break; case SDLK_RMETA: case SDLK_RSUPER: keycode = 0x5c | 0x100; break; case SDLK_LMETA: case SDLK_LSUPER: keycode = 0x5b | 0x100; break; /* Assumes normal key. */ default: keycode = s_aMacToSet1[keycode]; break; } } else { if ((unsigned)keycode < RT_ELEMENTS(s_aMacToSet1)) keycode = s_aMacToSet1[keycode]; else keycode = 0; if (!keycode) { # ifdef DEBUG_bird RTPrintf("Untranslated: keycode=%#x (%d)\n", keycode, keycode); # endif keycode = Keyevent2KeycodeFallback(ev); } } # ifdef DEBUG_bird RTPrintf("scancode=%#x -> %#x\n", ev->keysym.scancode, keycode); # endif #elif defined(RT_OS_OS2) keycode = Keyevent2KeycodeFallback(ev); #endif /* RT_OS_DARWIN */ return keycode; } /** * Releases any modifier keys that are currently in pressed state. */ static void ResetKeys(void) { int i; if (!gpKeyboard) return; for(i = 0; i < 256; i++) { if (gaModifiersState[i]) { if (i & 0x80) gpKeyboard->PutScancode(0xe0); gpKeyboard->PutScancode(i | 0x80); gaModifiersState[i] = 0; } } } /** * Keyboard event handler. * * @param ev SDL keyboard event. */ static void ProcessKey(SDL_KeyboardEvent *ev) { #if (defined(DEBUG) || defined(VBOX_WITH_STATISTICS)) && !defined(VBOX_WITH_SDL13) if (gpMachineDebugger && ev->type == SDL_KEYDOWN) { // first handle the debugger hotkeys uint8_t *keystate = SDL_GetKeyState(NULL); #if 0 // CTRL+ALT+Fn is not free on Linux hosts with Xorg .. if (keystate[SDLK_LALT] && !keystate[SDLK_LCTRL]) #else if (keystate[SDLK_LALT] && keystate[SDLK_LCTRL]) #endif { switch (ev->keysym.sym) { // pressing CTRL+ALT+F11 dumps the statistics counter case SDLK_F12: RTPrintf("ResetStats\n"); /* Visual feedback in console window */ gpMachineDebugger->ResetStats(NULL); break; // pressing CTRL+ALT+F12 resets all statistics counter case SDLK_F11: gpMachineDebugger->DumpStats(NULL); RTPrintf("DumpStats\n"); /* Vistual feedback in console window */ break; default: break; } } #if 1 else if (keystate[SDLK_LALT] && !keystate[SDLK_LCTRL]) { switch (ev->keysym.sym) { // pressing Alt-F12 toggles the supervisor recompiler case SDLK_F12: { BOOL recompileSupervisor; gpMachineDebugger->COMGETTER(RecompileSupervisor)(&recompileSupervisor); gpMachineDebugger->COMSETTER(RecompileSupervisor)(!recompileSupervisor); break; } // pressing Alt-F11 toggles the user recompiler case SDLK_F11: { BOOL recompileUser; gpMachineDebugger->COMGETTER(RecompileUser)(&recompileUser); gpMachineDebugger->COMSETTER(RecompileUser)(!recompileUser); break; } // pressing Alt-F10 toggles the patch manager case SDLK_F10: { BOOL patmEnabled; gpMachineDebugger->COMGETTER(PATMEnabled)(&patmEnabled); gpMachineDebugger->COMSETTER(PATMEnabled)(!patmEnabled); break; } // pressing Alt-F9 toggles CSAM case SDLK_F9: { BOOL csamEnabled; gpMachineDebugger->COMGETTER(CSAMEnabled)(&csamEnabled); gpMachineDebugger->COMSETTER(CSAMEnabled)(!csamEnabled); break; } // pressing Alt-F8 toggles singlestepping mode case SDLK_F8: { BOOL singlestepEnabled; gpMachineDebugger->COMGETTER(SingleStep)(&singlestepEnabled); gpMachineDebugger->COMSETTER(SingleStep)(!singlestepEnabled); break; } default: break; } } #endif // pressing Ctrl-F12 toggles the logger else if ((keystate[SDLK_RCTRL] || keystate[SDLK_LCTRL]) && ev->keysym.sym == SDLK_F12) { BOOL logEnabled = TRUE; gpMachineDebugger->COMGETTER(LogEnabled)(&logEnabled); gpMachineDebugger->COMSETTER(LogEnabled)(!logEnabled); #ifdef DEBUG_bird return; #endif } // pressing F12 sets a logmark else if (ev->keysym.sym == SDLK_F12) { RTLogPrintf("****** LOGGING MARK ******\n"); RTLogFlush(NULL); } // now update the titlebar flags UpdateTitlebar(TITLEBAR_NORMAL); } #endif // DEBUG || VBOX_WITH_STATISTICS // the pause key is the weirdest, needs special handling if (ev->keysym.sym == SDLK_PAUSE) { int v = 0; if (ev->type == SDL_KEYUP) v |= 0x80; gpKeyboard->PutScancode(0xe1); gpKeyboard->PutScancode(0x1d | v); gpKeyboard->PutScancode(0x45 | v); return; } /* * Perform SDL key event to scancode conversion */ int keycode = Keyevent2Keycode(ev); switch(keycode) { case 0x00: { /* sent when leaving window: reset the modifiers state */ ResetKeys(); return; } case 0x2a: /* Left Shift */ case 0x36: /* Right Shift */ case 0x1d: /* Left CTRL */ case 0x1d|0x100: /* Right CTRL */ case 0x38: /* Left ALT */ case 0x38|0x100: /* Right ALT */ { if (ev->type == SDL_KEYUP) gaModifiersState[keycode & ~0x100] = 0; else gaModifiersState[keycode & ~0x100] = 1; break; } case 0x45: /* Num Lock */ case 0x3a: /* Caps Lock */ { /* * SDL generates a KEYDOWN event if the lock key is active and a KEYUP event * if the lock key is inactive. See SDL_DISABLE_LOCK_KEYS. */ if (ev->type == SDL_KEYDOWN || ev->type == SDL_KEYUP) { gpKeyboard->PutScancode(keycode); gpKeyboard->PutScancode(keycode | 0x80); } return; } } if (ev->type != SDL_KEYDOWN) { /* * Some keyboards (e.g. the one of mine T60) don't send a NumLock scan code on every * press of the key. Both the guest and the host should agree on the NumLock state. * If they differ, we try to alter the guest NumLock state by sending the NumLock key * scancode. We will get a feedback through the KBD_CMD_SET_LEDS command if the guest * tries to set/clear the NumLock LED. If a (silly) guest doesn't change the LED, don't * bother him with NumLock scancodes. At least our BIOS, Linux and Windows handle the * NumLock LED well. */ if ( gcGuestNumLockAdaptions && (gfGuestNumLockPressed ^ !!(SDL_GetModState() & KMOD_NUM))) { gcGuestNumLockAdaptions--; gpKeyboard->PutScancode(0x45); gpKeyboard->PutScancode(0x45 | 0x80); } if ( gcGuestCapsLockAdaptions && (gfGuestCapsLockPressed ^ !!(SDL_GetModState() & KMOD_CAPS))) { gcGuestCapsLockAdaptions--; gpKeyboard->PutScancode(0x3a); gpKeyboard->PutScancode(0x3a | 0x80); } } /* * Now we send the event. Apply extended and release prefixes. */ if (keycode & 0x100) gpKeyboard->PutScancode(0xe0); gpKeyboard->PutScancode(ev->type == SDL_KEYUP ? (keycode & 0x7f) | 0x80 : (keycode & 0x7f)); } #ifdef RT_OS_DARWIN #include RT_C_DECLS_BEGIN /* Private interface in 10.3 and later. */ typedef int CGSConnection; typedef enum { kCGSGlobalHotKeyEnable = 0, kCGSGlobalHotKeyDisable, kCGSGlobalHotKeyInvalid = -1 /* bird */ } CGSGlobalHotKeyOperatingMode; extern CGSConnection _CGSDefaultConnection(void); extern CGError CGSGetGlobalHotKeyOperatingMode(CGSConnection Connection, CGSGlobalHotKeyOperatingMode *enmMode); extern CGError CGSSetGlobalHotKeyOperatingMode(CGSConnection Connection, CGSGlobalHotKeyOperatingMode enmMode); RT_C_DECLS_END /** Keeping track of whether we disabled the hotkeys or not. */ static bool g_fHotKeysDisabled = false; /** Whether we've connected or not. */ static bool g_fConnectedToCGS = false; /** Cached connection. */ static CGSConnection g_CGSConnection; /** * Disables or enabled global hot keys. */ static void DisableGlobalHotKeys(bool fDisable) { if (!g_fConnectedToCGS) { g_CGSConnection = _CGSDefaultConnection(); g_fConnectedToCGS = true; } /* get current mode. */ CGSGlobalHotKeyOperatingMode enmMode = kCGSGlobalHotKeyInvalid; CGSGetGlobalHotKeyOperatingMode(g_CGSConnection, &enmMode); /* calc new mode. */ if (fDisable) { if (enmMode != kCGSGlobalHotKeyEnable) return; enmMode = kCGSGlobalHotKeyDisable; } else { if ( enmMode != kCGSGlobalHotKeyDisable /*|| !g_fHotKeysDisabled*/) return; enmMode = kCGSGlobalHotKeyEnable; } /* try set it and check the actual result. */ CGSSetGlobalHotKeyOperatingMode(g_CGSConnection, enmMode); CGSGlobalHotKeyOperatingMode enmNewMode = kCGSGlobalHotKeyInvalid; CGSGetGlobalHotKeyOperatingMode(g_CGSConnection, &enmNewMode); if (enmNewMode == enmMode) g_fHotKeysDisabled = enmMode == kCGSGlobalHotKeyDisable; } #endif /* RT_OS_DARWIN */ /** * Start grabbing the mouse. */ static void InputGrabStart(void) { #ifdef RT_OS_DARWIN DisableGlobalHotKeys(true); #endif if (!gfGuestNeedsHostCursor && gfRelativeMouseGuest) SDL_ShowCursor(SDL_DISABLE); SDL_WM_GrabInput(SDL_GRAB_ON); // dummy read to avoid moving the mouse SDL_GetRelativeMouseState( #ifdef VBOX_WITH_SDL13 0, #endif NULL, NULL); gfGrabbed = TRUE; UpdateTitlebar(TITLEBAR_NORMAL); } /** * End mouse grabbing. */ static void InputGrabEnd(void) { SDL_WM_GrabInput(SDL_GRAB_OFF); if (!gfGuestNeedsHostCursor && gfRelativeMouseGuest) SDL_ShowCursor(SDL_ENABLE); #ifdef RT_OS_DARWIN DisableGlobalHotKeys(false); #endif gfGrabbed = FALSE; UpdateTitlebar(TITLEBAR_NORMAL); } /** * Query mouse position and button state from SDL and send to the VM * * @param dz Relative mouse wheel movement */ static void SendMouseEvent(VBoxSDLFB *fb, int dz, int down, int button) { int x, y, state, buttons; bool abs; #ifdef VBOX_WITH_SDL13 if (!fb) { SDL_GetMouseState(0, &x, &y); RTPrintf("MouseEvent: Cannot find fb mouse = %d,%d\n", x, y); return; } #else AssertRelease(fb != NULL); #endif /* * If supported and we're not in grabbed mode, we'll use the absolute mouse. * If we are in grabbed mode and the guest is not able to draw the mouse cursor * itself, or can't handle relative reporting, we have to use absolute * coordinates, otherwise the host cursor and * the coordinates the guest thinks the mouse is at could get out-of-sync. From * the SDL mailing list: * * "The event processing is usually asynchronous and so somewhat delayed, and * SDL_GetMouseState is returning the immediate mouse state. So at the time you * call SDL_GetMouseState, the "button" is already up." */ abs = (UseAbsoluteMouse() && !gfGrabbed) || gfGuestNeedsHostCursor || !gfRelativeMouseGuest; /* only used if abs == TRUE */ int xOrigin = fb->getOriginX(); int yOrigin = fb->getOriginY(); int xMin = fb->getXOffset() + xOrigin; int yMin = fb->getYOffset() + yOrigin; int xMax = xMin + (int)fb->getGuestXRes(); int yMax = yMin + (int)fb->getGuestYRes(); state = abs ? SDL_GetMouseState( #ifdef VBOX_WITH_SDL13 0, #endif &x, &y) : SDL_GetRelativeMouseState( #ifdef VBOX_WITH_SDL13 0, #endif &x, &y); /* * process buttons */ buttons = 0; if (state & SDL_BUTTON(SDL_BUTTON_LEFT)) buttons |= MouseButtonState_LeftButton; if (state & SDL_BUTTON(SDL_BUTTON_RIGHT)) buttons |= MouseButtonState_RightButton; if (state & SDL_BUTTON(SDL_BUTTON_MIDDLE)) buttons |= MouseButtonState_MiddleButton; if (abs) { x += xOrigin; y += yOrigin; /* * Check if the mouse event is inside the guest area. This solves the * following problem: Some guests switch off the VBox hardware mouse * cursor and draw the mouse cursor itself instead. Moving the mouse * outside the guest area then leads to annoying mouse hangs if we * don't pass mouse motion events into the guest. */ if (x < xMin || y < yMin || x > xMax || y > yMax) { /* * Cursor outside of valid guest area (outside window or in secure * label area. Don't allow any mouse button press. */ button = 0; /* * Release any pressed button. */ #if 0 /* disabled on customers request */ buttons &= ~(MouseButtonState_LeftButton | MouseButtonState_MiddleButton | MouseButtonState_RightButton); #endif /* * Prevent negative coordinates. */ if (x < xMin) x = xMin; if (x > xMax) x = xMax; if (y < yMin) y = yMin; if (y > yMax) y = yMax; if (!gpOffCursor) { gpOffCursor = SDL_GetCursor(); /* Cursor image */ gfOffCursorActive = SDL_ShowCursor(-1); /* enabled / disabled */ SDL_SetCursor(gpDefaultCursor); SDL_ShowCursor(SDL_ENABLE); } } else { if (gpOffCursor) { /* * We just entered the valid guest area. Restore the guest mouse * cursor. */ SDL_SetCursor(gpOffCursor); SDL_ShowCursor(gfOffCursorActive ? SDL_ENABLE : SDL_DISABLE); gpOffCursor = NULL; } } } /* * Button was pressed but that press is not reflected in the button state? */ if (down && !(state & SDL_BUTTON(button))) { /* * It can happen that a mouse up event follows a mouse down event immediately * and we see the events when the bit in the button state is already cleared * again. In that case we simulate the mouse down event. */ int tmp_button = 0; switch (button) { case SDL_BUTTON_LEFT: tmp_button = MouseButtonState_LeftButton; break; case SDL_BUTTON_MIDDLE: tmp_button = MouseButtonState_MiddleButton; break; case SDL_BUTTON_RIGHT: tmp_button = MouseButtonState_RightButton; break; } if (abs) { /** * @todo * PutMouseEventAbsolute() expects x and y starting from 1,1. * should we do the increment internally in PutMouseEventAbsolute() * or state it in PutMouseEventAbsolute() docs? */ gpMouse->PutMouseEventAbsolute(x + 1 - xMin + xOrigin, y + 1 - yMin + yOrigin, dz, 0 /* horizontal scroll wheel */, buttons | tmp_button); } else { gpMouse->PutMouseEvent(0, 0, dz, 0 /* horizontal scroll wheel */, buttons | tmp_button); } } // now send the mouse event if (abs) { /** * @todo * PutMouseEventAbsolute() expects x and y starting from 1,1. * should we do the increment internally in PutMouseEventAbsolute() * or state it in PutMouseEventAbsolute() docs? */ gpMouse->PutMouseEventAbsolute(x + 1 - xMin + xOrigin, y + 1 - yMin + yOrigin, dz, 0 /* Horizontal wheel */, buttons); } else { gpMouse->PutMouseEvent(x, y, dz, 0 /* Horizontal wheel */, buttons); } } /** * Resets the VM */ void ResetVM(void) { if (gpConsole) gpConsole->Reset(); } /** * Initiates a saved state and updates the titlebar with progress information */ void SaveState(void) { ResetKeys(); RTThreadYield(); if (gfGrabbed) InputGrabEnd(); RTThreadYield(); UpdateTitlebar(TITLEBAR_SAVE); gpProgress = NULL; HRESULT rc = gpMachine->SaveState(gpProgress.asOutParam()); if (FAILED(rc)) { RTPrintf("Error saving state! rc = 0x%x\n", rc); return; } Assert(gpProgress); /* * Wait for the operation to be completed and work * the title bar in the mean while. */ ULONG cPercent = 0; #ifndef RT_OS_DARWIN /* don't break the other guys yet. */ for (;;) { BOOL fCompleted = false; rc = gpProgress->COMGETTER(Completed)(&fCompleted); if (FAILED(rc) || fCompleted) break; ULONG cPercentNow; rc = gpProgress->COMGETTER(Percent)(&cPercentNow); if (FAILED(rc)) break; if (cPercentNow != cPercent) { UpdateTitlebar(TITLEBAR_SAVE, cPercent); cPercent = cPercentNow; } /* wait */ rc = gpProgress->WaitForCompletion(100); if (FAILED(rc)) break; /// @todo process gui events. } #else /* new loop which processes GUI events while saving. */ /* start regular timer so we don't starve in the event loop */ SDL_TimerID sdlTimer; sdlTimer = SDL_AddTimer(100, StartupTimer, NULL); for (;;) { /* * Check for completion. */ BOOL fCompleted = false; rc = gpProgress->COMGETTER(Completed)(&fCompleted); if (FAILED(rc) || fCompleted) break; ULONG cPercentNow; rc = gpProgress->COMGETTER(Percent)(&cPercentNow); if (FAILED(rc)) break; if (cPercentNow != cPercent) { UpdateTitlebar(TITLEBAR_SAVE, cPercent); cPercent = cPercentNow; } /* * Wait for and process GUI a event. * This is necessary for XPCOM IPC and for updating the * title bar on the Mac. */ SDL_Event event; if (WaitSDLEvent(&event)) { switch (event.type) { /* * Timer event preventing us from getting stuck. */ case SDL_USER_EVENT_TIMER: break; #ifdef USE_XPCOM_QUEUE_THREAD /* * User specific XPCOM event queue event */ case SDL_USER_EVENT_XPCOM_EVENTQUEUE: { LogFlow(("SDL_USER_EVENT_XPCOM_EVENTQUEUE: processing XPCOM event queue...\n")); eventQ->ProcessPendingEvents(); signalXPCOMEventQueueThread(); break; } #endif /* USE_XPCOM_QUEUE_THREAD */ /* * Ignore all other events. */ case SDL_USER_EVENT_NOTIFYCHANGE: case SDL_USER_EVENT_TERMINATE: default: break; } } } /* kill the timer */ SDL_RemoveTimer(sdlTimer); sdlTimer = 0; #endif /* RT_OS_DARWIN */ /* * What's the result of the operation? */ LONG lrc; rc = gpProgress->COMGETTER(ResultCode)(&lrc); if (FAILED(rc)) lrc = ~0; if (!lrc) { UpdateTitlebar(TITLEBAR_SAVE, 100); RTThreadYield(); RTPrintf("Saved the state successfully.\n"); } else RTPrintf("Error saving state, lrc=%d (%#x)\n", lrc, lrc); } /** * Build the titlebar string */ static void UpdateTitlebar(TitlebarMode mode, uint32_t u32User) { static char szTitle[1024] = {0}; /* back up current title */ char szPrevTitle[1024]; strcpy(szPrevTitle, szTitle); Bstr bstrName; gpMachine->COMGETTER(Name)(bstrName.asOutParam()); RTStrPrintf(szTitle, sizeof(szTitle), "%s - " VBOX_PRODUCT, !bstrName.isEmpty() ? Utf8Str(bstrName).c_str() : ""); /* which mode are we in? */ switch (mode) { case TITLEBAR_NORMAL: { MachineState_T machineState; gpMachine->COMGETTER(State)(&machineState); if (machineState == MachineState_Paused) RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " - [Paused]"); if (gfGrabbed) RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " - [Input captured]"); #if defined(DEBUG) || defined(VBOX_WITH_STATISTICS) // do we have a debugger interface if (gpMachineDebugger) { // query the machine state BOOL recompileSupervisor = FALSE; BOOL recompileUser = FALSE; BOOL patmEnabled = FALSE; BOOL csamEnabled = FALSE; BOOL singlestepEnabled = FALSE; BOOL logEnabled = FALSE; BOOL hwVirtEnabled = FALSE; ULONG virtualTimeRate = 100; gpMachineDebugger->COMGETTER(RecompileSupervisor)(&recompileSupervisor); gpMachineDebugger->COMGETTER(RecompileUser)(&recompileUser); gpMachineDebugger->COMGETTER(PATMEnabled)(&patmEnabled); gpMachineDebugger->COMGETTER(CSAMEnabled)(&csamEnabled); gpMachineDebugger->COMGETTER(LogEnabled)(&logEnabled); gpMachineDebugger->COMGETTER(SingleStep)(&singlestepEnabled); gpMachineDebugger->COMGETTER(HWVirtExEnabled)(&hwVirtEnabled); gpMachineDebugger->COMGETTER(VirtualTimeRate)(&virtualTimeRate); RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " [STEP=%d CS=%d PAT=%d RR0=%d RR3=%d LOG=%d HWVirt=%d", singlestepEnabled == TRUE, csamEnabled == TRUE, patmEnabled == TRUE, recompileSupervisor == FALSE, recompileUser == FALSE, logEnabled == TRUE, hwVirtEnabled == TRUE); char *psz = strchr(szTitle, '\0'); if (virtualTimeRate != 100) RTStrPrintf(psz, &szTitle[sizeof(szTitle)] - psz, " WD=%d%%]", virtualTimeRate); else RTStrPrintf(psz, &szTitle[sizeof(szTitle)] - psz, "]"); } #endif /* DEBUG || VBOX_WITH_STATISTICS */ break; } case TITLEBAR_STARTUP: { /* * Format it. */ MachineState_T machineState; gpMachine->COMGETTER(State)(&machineState); if (machineState == MachineState_Starting) RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " - Starting..."); else if (machineState == MachineState_Restoring) { ULONG cPercentNow; HRESULT rc = gpProgress->COMGETTER(Percent)(&cPercentNow); if (SUCCEEDED(rc)) RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " - Restoring %d%%...", (int)cPercentNow); else RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " - Restoring..."); } else if (machineState == MachineState_TeleportingIn) { ULONG cPercentNow; HRESULT rc = gpProgress->COMGETTER(Percent)(&cPercentNow); if (SUCCEEDED(rc)) RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " - Teleporting %d%%...", (int)cPercentNow); else RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " - Teleporting..."); } /* ignore other states, we could already be in running or aborted state */ break; } case TITLEBAR_SAVE: { AssertMsg(u32User <= 100, ("%d\n", u32User)); RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " - Saving %d%%...", u32User); break; } case TITLEBAR_SNAPSHOT: { AssertMsg(u32User <= 100, ("%d\n", u32User)); RTStrPrintf(szTitle + strlen(szTitle), sizeof(szTitle) - strlen(szTitle), " - Taking snapshot %d%%...", u32User); break; } default: RTPrintf("Error: Invalid title bar mode %d!\n", mode); return; } /* * Don't update if it didn't change. */ if (!strcmp(szTitle, szPrevTitle)) return; /* * Set the new title */ #ifdef VBOX_WIN32_UI setUITitle(szTitle); #else SDL_WM_SetCaption(szTitle, VBOX_PRODUCT); #endif } #if 0 static void vbox_show_shape(unsigned short w, unsigned short h, uint32_t bg, const uint8_t *image) { size_t x, y; unsigned short pitch; const uint32_t *color; const uint8_t *mask; size_t size_mask; mask = image; pitch = (w + 7) / 8; size_mask = (pitch * h + 3) & ~3; color = (const uint32_t *)(image + size_mask); printf("show_shape %dx%d pitch %d size mask %d\n", w, h, pitch, size_mask); for (y = 0; y < h; ++y, mask += pitch, color += w) { for (x = 0; x < w; ++x) { if (mask[x / 8] & (1 << (7 - (x % 8)))) printf(" "); else { uint32_t c = color[x]; if (c == bg) printf("Y"); else printf("X"); } } printf("\n"); } } #endif /** * Sets the pointer shape according to parameters. * Must be called only from the main SDL thread. */ static void SetPointerShape(const PointerShapeChangeData *data) { /* * don't allow to change the pointer shape if we are outside the valid * guest area. In that case set standard mouse pointer is set and should * not get overridden. */ if (gpOffCursor) return; if (data->shape.size() > 0) { bool ok = false; uint32_t andMaskSize = (data->width + 7) / 8 * data->height; uint32_t srcShapePtrScan = data->width * 4; const uint8_t* shape = data->shape.raw(); const uint8_t *srcAndMaskPtr = shape; const uint8_t *srcShapePtr = shape + ((andMaskSize + 3) & ~3); #if 0 /* pointer debugging code */ // vbox_show_shape(data->width, data->height, 0, data->shape); uint32_t shapeSize = ((((data->width + 7) / 8) * data->height + 3) & ~3) + data->width * 4 * data->height; printf("visible: %d\n", data->visible); printf("width = %d\n", data->width); printf("height = %d\n", data->height); printf("alpha = %d\n", data->alpha); printf("xhot = %d\n", data->xHot); printf("yhot = %d\n", data->yHot); printf("uint8_t pointerdata[] = { "); for (uint32_t i = 0; i < shapeSize; i++) { printf("0x%x, ", data->shape[i]); } printf("};\n"); #endif #if defined(RT_OS_WINDOWS) BITMAPV5HEADER bi; HBITMAP hBitmap; void *lpBits; HCURSOR hAlphaCursor = NULL; ::ZeroMemory(&bi, sizeof(BITMAPV5HEADER)); bi.bV5Size = sizeof(BITMAPV5HEADER); bi.bV5Width = data->width; bi.bV5Height = -(LONG)data->height; bi.bV5Planes = 1; bi.bV5BitCount = 32; bi.bV5Compression = BI_BITFIELDS; // specify a supported 32 BPP alpha format for Windows XP bi.bV5RedMask = 0x00FF0000; bi.bV5GreenMask = 0x0000FF00; bi.bV5BlueMask = 0x000000FF; if (data->alpha) bi.bV5AlphaMask = 0xFF000000; else bi.bV5AlphaMask = 0; HDC hdc = ::GetDC(NULL); // create the DIB section with an alpha channel hBitmap = ::CreateDIBSection(hdc, (BITMAPINFO *)&bi, DIB_RGB_COLORS, (void **)&lpBits, NULL, (DWORD)0); ::ReleaseDC(NULL, hdc); HBITMAP hMonoBitmap = NULL; if (data->alpha) { // create an empty mask bitmap hMonoBitmap = ::CreateBitmap(data->width, data->height, 1, 1, NULL); } else { /* Word aligned AND mask. Will be allocated and created if necessary. */ uint8_t *pu8AndMaskWordAligned = NULL; /* Width in bytes of the original AND mask scan line. */ uint32_t cbAndMaskScan = (data->width + 7) / 8; if (cbAndMaskScan & 1) { /* Original AND mask is not word aligned. */ /* Allocate memory for aligned AND mask. */ pu8AndMaskWordAligned = (uint8_t *)RTMemTmpAllocZ((cbAndMaskScan + 1) * data->height); Assert(pu8AndMaskWordAligned); if (pu8AndMaskWordAligned) { /* According to MSDN the padding bits must be 0. * Compute the bit mask to set padding bits to 0 in the last byte of original AND mask. */ uint32_t u32PaddingBits = cbAndMaskScan * 8 - data->width; Assert(u32PaddingBits < 8); uint8_t u8LastBytesPaddingMask = (uint8_t)(0xFF << u32PaddingBits); Log(("u8LastBytesPaddingMask = %02X, aligned w = %d, width = %d, cbAndMaskScan = %d\n", u8LastBytesPaddingMask, (cbAndMaskScan + 1) * 8, data->width, cbAndMaskScan)); uint8_t *src = (uint8_t *)srcAndMaskPtr; uint8_t *dst = pu8AndMaskWordAligned; unsigned i; for (i = 0; i < data->height; i++) { memcpy(dst, src, cbAndMaskScan); dst[cbAndMaskScan - 1] &= u8LastBytesPaddingMask; src += cbAndMaskScan; dst += cbAndMaskScan + 1; } } } // create the AND mask bitmap hMonoBitmap = ::CreateBitmap(data->width, data->height, 1, 1, pu8AndMaskWordAligned? pu8AndMaskWordAligned: srcAndMaskPtr); if (pu8AndMaskWordAligned) { RTMemTmpFree(pu8AndMaskWordAligned); } } Assert(hBitmap); Assert(hMonoBitmap); if (hBitmap && hMonoBitmap) { DWORD *dstShapePtr = (DWORD *)lpBits; for (uint32_t y = 0; y < data->height; y ++) { memcpy(dstShapePtr, srcShapePtr, srcShapePtrScan); srcShapePtr += srcShapePtrScan; dstShapePtr += data->width; } ICONINFO ii; ii.fIcon = FALSE; ii.xHotspot = data->xHot; ii.yHotspot = data->yHot; ii.hbmMask = hMonoBitmap; ii.hbmColor = hBitmap; hAlphaCursor = ::CreateIconIndirect(&ii); Assert(hAlphaCursor); if (hAlphaCursor) { // here we do a dirty trick by substituting a Window Manager's // cursor handle with the handle we created WMcursor *pCustomTempWMCursor = gpCustomCursor->wm_cursor; // see SDL12/src/video/wincommon/SDL_sysmouse.c void *wm_cursor = malloc(sizeof(HCURSOR) + sizeof(uint8_t *) * 2); *(HCURSOR *)wm_cursor = hAlphaCursor; gpCustomCursor->wm_cursor = (WMcursor *)wm_cursor; SDL_SetCursor(gpCustomCursor); SDL_ShowCursor(SDL_ENABLE); if (pCustomTempWMCursor) { ::DestroyCursor(*(HCURSOR *)pCustomTempWMCursor); free(pCustomTempWMCursor); } ok = true; } } if (hMonoBitmap) ::DeleteObject(hMonoBitmap); if (hBitmap) ::DeleteObject(hBitmap); #elif defined(VBOXSDL_WITH_X11) && !defined(VBOX_WITHOUT_XCURSOR) if (gfXCursorEnabled) { XcursorImage *img = XcursorImageCreate(data->width, data->height); Assert(img); if (img) { img->xhot = data->xHot; img->yhot = data->yHot; XcursorPixel *dstShapePtr = img->pixels; for (uint32_t y = 0; y < data->height; y ++) { memcpy(dstShapePtr, srcShapePtr, srcShapePtrScan); if (!data->alpha) { // convert AND mask to the alpha channel uint8_t byte = 0; for (uint32_t x = 0; x < data->width; x ++) { if (!(x % 8)) byte = *(srcAndMaskPtr ++); else byte <<= 1; if (byte & 0x80) { // Linux doesn't support inverted pixels (XOR ops, // to be exact) in cursor shapes, so we detect such // pixels and always replace them with black ones to // make them visible at least over light colors if (dstShapePtr [x] & 0x00FFFFFF) dstShapePtr [x] = 0xFF000000; else dstShapePtr [x] = 0x00000000; } else dstShapePtr [x] |= 0xFF000000; } } srcShapePtr += srcShapePtrScan; dstShapePtr += data->width; } #ifndef VBOX_WITH_SDL13 Cursor cur = XcursorImageLoadCursor(gSdlInfo.info.x11.display, img); Assert(cur); if (cur) { // here we do a dirty trick by substituting a Window Manager's // cursor handle with the handle we created WMcursor *pCustomTempWMCursor = gpCustomCursor->wm_cursor; // see SDL12/src/video/x11/SDL_x11mouse.c void *wm_cursor = malloc(sizeof(Cursor)); *(Cursor *)wm_cursor = cur; gpCustomCursor->wm_cursor = (WMcursor *)wm_cursor; SDL_SetCursor(gpCustomCursor); SDL_ShowCursor(SDL_ENABLE); if (pCustomTempWMCursor) { XFreeCursor(gSdlInfo.info.x11.display, *(Cursor *)pCustomTempWMCursor); free(pCustomTempWMCursor); } ok = true; } #endif } XcursorImageDestroy(img); } #endif /* VBOXSDL_WITH_X11 && !VBOX_WITHOUT_XCURSOR */ if (!ok) { SDL_SetCursor(gpDefaultCursor); SDL_ShowCursor(SDL_ENABLE); } } else { if (data->visible) SDL_ShowCursor(SDL_ENABLE); else if (gfAbsoluteMouseGuest) /* Don't disable the cursor if the guest additions are not active (anymore) */ SDL_ShowCursor(SDL_DISABLE); } } /** * Handle changed mouse capabilities */ static void HandleGuestCapsChanged(void) { if (!gfAbsoluteMouseGuest) { // Cursor could be overwritten by the guest tools SDL_SetCursor(gpDefaultCursor); SDL_ShowCursor(SDL_ENABLE); gpOffCursor = NULL; } if (gpMouse && UseAbsoluteMouse()) { // Actually switch to absolute coordinates if (gfGrabbed) InputGrabEnd(); gpMouse->PutMouseEventAbsolute(-1, -1, 0, 0, 0); } } /** * Handles a host key down event */ static int HandleHostKey(const SDL_KeyboardEvent *pEv) { /* * Revalidate the host key modifier */ if ((SDL_GetModState() & ~(KMOD_MODE | KMOD_NUM | KMOD_RESERVED)) != gHostKeyMod) return VERR_NOT_SUPPORTED; /* * What was pressed? */ switch (pEv->keysym.sym) { /* Control-Alt-Delete */ case SDLK_DELETE: { gpKeyboard->PutCAD(); break; } /* * Fullscreen / Windowed toggle. */ case SDLK_f: { if ( strchr(gHostKeyDisabledCombinations, 'f') || !gfAllowFullscreenToggle) return VERR_NOT_SUPPORTED; /* * We have to pause/resume the machine during this * process because there might be a short moment * without a valid framebuffer */ MachineState_T machineState; gpMachine->COMGETTER(State)(&machineState); bool fPauseIt = machineState == MachineState_Running || machineState == MachineState_Teleporting || machineState == MachineState_LiveSnapshotting; if (fPauseIt) gpConsole->Pause(); SetFullscreen(!gpFramebuffer[0]->getFullscreen()); if (fPauseIt) gpConsole->Resume(); /* * We have switched from/to fullscreen, so request a full * screen repaint, just to be sure. */ gpDisplay->InvalidateAndUpdate(); break; } /* * Pause / Resume toggle. */ case SDLK_p: { if (strchr(gHostKeyDisabledCombinations, 'p')) return VERR_NOT_SUPPORTED; MachineState_T machineState; gpMachine->COMGETTER(State)(&machineState); if ( machineState == MachineState_Running || machineState == MachineState_Teleporting || machineState == MachineState_LiveSnapshotting ) { if (gfGrabbed) InputGrabEnd(); gpConsole->Pause(); } else if (machineState == MachineState_Paused) { gpConsole->Resume(); } UpdateTitlebar(TITLEBAR_NORMAL); break; } /* * Reset the VM */ case SDLK_r: { if (strchr(gHostKeyDisabledCombinations, 'r')) return VERR_NOT_SUPPORTED; ResetVM(); break; } /* * Terminate the VM */ case SDLK_q: { if (strchr(gHostKeyDisabledCombinations, 'q')) return VERR_NOT_SUPPORTED; return VINF_EM_TERMINATE; } /* * Save the machine's state and exit */ case SDLK_s: { if (strchr(gHostKeyDisabledCombinations, 's')) return VERR_NOT_SUPPORTED; SaveState(); return VINF_EM_TERMINATE; } case SDLK_h: { if (strchr(gHostKeyDisabledCombinations, 'h')) return VERR_NOT_SUPPORTED; if (gpConsole) gpConsole->PowerButton(); break; } /* * Perform an online snapshot. Continue operation. */ case SDLK_n: { if (strchr(gHostKeyDisabledCombinations, 'n')) return VERR_NOT_SUPPORTED; RTThreadYield(); ULONG cSnapshots = 0; gpMachine->COMGETTER(SnapshotCount)(&cSnapshots); char pszSnapshotName[20]; RTStrPrintf(pszSnapshotName, sizeof(pszSnapshotName), "Snapshot %d", cSnapshots + 1); gpProgress = NULL; HRESULT rc; Bstr snapId; CHECK_ERROR(gpMachine, TakeSnapshot(Bstr(pszSnapshotName).raw(), Bstr("Taken by VBoxSDL").raw(), TRUE, snapId.asOutParam(), gpProgress.asOutParam())); if (FAILED(rc)) { RTPrintf("Error taking snapshot! rc = 0x%x\n", rc); /* continue operation */ return VINF_SUCCESS; } /* * Wait for the operation to be completed and work * the title bar in the mean while. */ ULONG cPercent = 0; for (;;) { BOOL fCompleted = false; rc = gpProgress->COMGETTER(Completed)(&fCompleted); if (FAILED(rc) || fCompleted) break; ULONG cPercentNow; rc = gpProgress->COMGETTER(Percent)(&cPercentNow); if (FAILED(rc)) break; if (cPercentNow != cPercent) { UpdateTitlebar(TITLEBAR_SNAPSHOT, cPercent); cPercent = cPercentNow; } /* wait */ rc = gpProgress->WaitForCompletion(100); if (FAILED(rc)) break; /// @todo process gui events. } /* continue operation */ return VINF_SUCCESS; } case SDLK_F1: case SDLK_F2: case SDLK_F3: case SDLK_F4: case SDLK_F5: case SDLK_F6: case SDLK_F7: case SDLK_F8: case SDLK_F9: case SDLK_F10: case SDLK_F11: case SDLK_F12: { // /* send Ctrl-Alt-Fx to guest */ com::SafeArray keys(6); keys[0] = 0x1d; // Ctrl down keys[1] = 0x38; // Alt down keys[2] = Keyevent2Keycode(pEv); // Fx down keys[3] = keys[2] + 0x80; // Fx up keys[4] = 0xb8; // Alt up keys[5] = 0x9d; // Ctrl up gpKeyboard->PutScancodes(ComSafeArrayAsInParam(keys), NULL); return VINF_SUCCESS; } /* * Not a host key combination. * Indicate this by returning false. */ default: return VERR_NOT_SUPPORTED; } return VINF_SUCCESS; } /** * Timer callback function for startup processing */ static Uint32 StartupTimer(Uint32 interval, void *param) { RT_NOREF(param); /* post message so we can do something in the startup loop */ SDL_Event event = {0}; event.type = SDL_USEREVENT; event.user.type = SDL_USER_EVENT_TIMER; SDL_PushEvent(&event); RTSemEventSignal(g_EventSemSDLEvents); return interval; } /** * Timer callback function to check if resizing is finished */ static Uint32 ResizeTimer(Uint32 interval, void *param) { RT_NOREF(interval, param); /* post message so the window is actually resized */ SDL_Event event = {0}; event.type = SDL_USEREVENT; event.user.type = SDL_USER_EVENT_WINDOW_RESIZE_DONE; PushSDLEventForSure(&event); /* one-shot */ return 0; } /** * Timer callback function to check if an ACPI power button event was handled by the guest. */ static Uint32 QuitTimer(Uint32 interval, void *param) { RT_NOREF(interval, param); BOOL fHandled = FALSE; gSdlQuitTimer = NULL; if (gpConsole) { int rc = gpConsole->GetPowerButtonHandled(&fHandled); LogRel(("QuitTimer: rc=%d handled=%d\n", rc, fHandled)); if (RT_FAILURE(rc) || !fHandled) { /* event was not handled, power down the guest */ gfACPITerm = FALSE; SDL_Event event = {0}; event.type = SDL_QUIT; PushSDLEventForSure(&event); } } /* one-shot */ return 0; } /** * Wait for the next SDL event. Don't use SDL_WaitEvent since this function * calls SDL_Delay(10) if the event queue is empty. */ static int WaitSDLEvent(SDL_Event *event) { for (;;) { int rc = SDL_PollEvent(event); if (rc == 1) { #ifdef USE_XPCOM_QUEUE_THREAD if (event->type == SDL_USER_EVENT_XPCOM_EVENTQUEUE) consumedXPCOMUserEvent(); #endif return 1; } /* Immediately wake up if new SDL events are available. This does not * work for internal SDL events. Don't wait more than 10ms. */ RTSemEventWait(g_EventSemSDLEvents, 10); } } /** * Ensure that an SDL event is really enqueued. Try multiple times if necessary. */ int PushSDLEventForSure(SDL_Event *event) { int ntries = 10; for (; ntries > 0; ntries--) { int rc = SDL_PushEvent(event); RTSemEventSignal(g_EventSemSDLEvents); #ifdef VBOX_WITH_SDL13 if (rc == 1) #else if (rc == 0) #endif return 0; Log(("PushSDLEventForSure: waiting for 2ms (rc = %d)\n", rc)); RTThreadSleep(2); } LogRel(("WARNING: Failed to enqueue SDL event %d.%d!\n", event->type, event->type == SDL_USEREVENT ? event->user.type : 0)); return -1; } #ifdef VBOXSDL_WITH_X11 /** * Special SDL_PushEvent function for NotifyUpdate events. These events may occur in bursts * so make sure they don't flood the SDL event queue. */ void PushNotifyUpdateEvent(SDL_Event *event) { int rc = SDL_PushEvent(event); #ifdef VBOX_WITH_SDL13 bool fSuccess = (rc == 1); #else bool fSuccess = (rc == 0); #endif RTSemEventSignal(g_EventSemSDLEvents); AssertMsg(fSuccess, ("SDL_PushEvent returned SDL error\n")); /* A global counter is faster than SDL_PeepEvents() */ if (fSuccess) ASMAtomicIncS32(&g_cNotifyUpdateEventsPending); /* In order to not flood the SDL event queue, yield the CPU or (if there are already many * events queued) even sleep */ if (g_cNotifyUpdateEventsPending > 96) { /* Too many NotifyUpdate events, sleep for a small amount to give the main thread time * to handle these events. The SDL queue can hold up to 128 events. */ Log(("PushNotifyUpdateEvent: Sleep 1ms\n")); RTThreadSleep(1); } else RTThreadYield(); } #endif /* VBOXSDL_WITH_X11 */ /** * */ static void SetFullscreen(bool enable) { if (enable == gpFramebuffer[0]->getFullscreen()) return; if (!gfFullscreenResize) { /* * The old/default way: SDL will resize the host to fit the guest screen resolution. */ gpFramebuffer[0]->setFullscreen(enable); } else { /* * The alternate way: Switch to fullscreen with the host screen resolution and adapt * the guest screen resolution to the host window geometry. */ uint32_t NewWidth = 0, NewHeight = 0; if (enable) { /* switch to fullscreen */ gmGuestNormalXRes = gpFramebuffer[0]->getGuestXRes(); gmGuestNormalYRes = gpFramebuffer[0]->getGuestYRes(); gpFramebuffer[0]->getFullscreenGeometry(&NewWidth, &NewHeight); } else { /* switch back to saved geometry */ NewWidth = gmGuestNormalXRes; NewHeight = gmGuestNormalYRes; } if (NewWidth != 0 && NewHeight != 0) { gpFramebuffer[0]->setFullscreen(enable); gfIgnoreNextResize = TRUE; gpDisplay->SetVideoModeHint(0 /*=display*/, true /*=enabled*/, false /*=changeOrigin*/, 0 /*=originX*/, 0 /*=originY*/, NewWidth, NewHeight, 0 /*don't change bpp*/); } } } #ifdef VBOX_WITH_SDL13 static VBoxSDLFB * getFbFromWinId(SDL_WindowID id) { for (unsigned i = 0; i < gcMonitors; i++) if (gpFramebuffer[i]->hasWindow(id)) return gpFramebuffer[i]; return NULL; } #endif