@@@ English Native language name العربية -- Native language country name (empty if this language is for all countries) English Language name, in English Arabic -- Language country name, in English (empty if native country name is empty) innotek Comma-separated list of translators Berdai Mohammed BootItemsList Move the selected boot device up. حرك وسيلة بدء التشغيل إلى اﻷعلى. Move the selected boot device down. حرك وسيلة بدء التشغيل إلى اﻷسفل. Move Up (Ctrl-Up) حرك إلى اﻷعلى Move Down (Ctrl-Down) حرك إلى اﻷسفل Moves the selected boot device up. Moves the selected boot device down. BootItemsTable Defines the boot device order. Use checkboxes to the left to enable or disable individual boot devices. Move items up and down to change the device order. لتحدد تسلسل وسائل بدء التشغيل. إستخدم العلامات المتواجدة على اليسار لتفعيل أو تعطيل أحد وسائل بدء التشغيل. حرك إلى اﻷعلى و اﻷسفل لتغير تسلسل وسائل بدء التشغيل. QApplication Executable %1 requires Qt %2.x, found Qt %3. البرنامج التنفيدي %1 يحتاج إلى Qt %2.x بدل من Qt %3. Incompatible Qt Library Error خطأ ناتج عن عدم التوافق مع مكتبة Qt QIHotKeyEdit Left يسار Right يمين Left Shift Right Shift Left Ctrl Right Ctrl Left Alt Right Alt Left WinKey Right WinKey Menu key Alt Gr Caps Lock Scroll Lock <key_%1> Pause Print Screen F1 F1 F2 F2 F3 F3 F4 F4 F5 F5 F6 F6 F7 F7 F8 F8 F9 F9 F10 F10 F11 F11 F12 F12 F13 F13 F14 F14 F15 F15 F16 F16 F17 F17 F18 F18 F19 F19 F20 F20 F21 F21 F22 F22 F23 F23 F24 F24 Num Lock Forward Back QIMessageBox OK موافق Yes نعم No لا Cancel إلغاء Ignore تجاهل QIRichLabel Copy to clipboard إنسخ إلى الذاكرة QIWidgetValidator not complete value state invalid value state <qt>Value of the %1 field on the %2 page is %3.</qt> <qt>One of the values on the %1 page is %2.</qt> QListBox Inaccessible متعذر بلوغه(ها) VBoxAboutDlg VirtualBox - About بخصوص فيرتول بوكس &OK &موافق Alt+O Alt+O VirtualBox Graphical User Interface Version %1 النسخة 1% لواجهة الرسوم الخاصة بالمستخدم لفيرتول بوكس <qt>VirtualBox Graphical User Interface Version %1 %2</qt> VBoxAddNIDialog Add Host Interface أضف واجهة للمضيف Interface Name إسم الواجهة Descriptive name of the new network interface إسم واصف لواجهة الشبكة الجديدة &OK &موافق Cancel إلغاء VBoxAddSFDialog Add Share أضف مشاركة Edit Share عدل مشاركة Enter existing path for the shared folder here أذخل هنا الممر المتعلق بالمجلد المُشتَرك Enter name for the shared folder to be created أذخل إسم مجلد المشاركة الذي تودون إنشاءه Click to invoke <open folder> dialog أنقر لإسدعاء علبة الحوار <open folder> Select a folder to share حدد مجلد للمشاركة Folder Path Folder Name Displays the path to an existing folder on the host PC. Displays the name of the shared folder (as it will be seen by the guest OS). Opens the dialog to select a folder. OK موافق Cancel إلغاء &OK &موافق &Make Permanent VBoxCloseVMDlg Close Virtual Machine أغلق اﻷلة الواقعية You want to: أنت تريد أن : &Save the machine state &حفظ حالة اﻷلة الواقعية Alt+S Alt+S &Power off the machine &قطع التيار عن الألة Alt+P Alt+P &Revert to the current snapshot &عد إلى القطة الحالية Alt+R Alt+R Revert the machine state to the state stored in the current snapshot أعد حالة اﻷلة الواقعية إلى الحالة المحفوظة في اللقطة الحالية Help مساعدة F1 F1 &OK &موافق Alt+O Alt+O Cancel إلغاء Saves the current execution state of the virtual machine to the physical hard disk of the host PC. Next time this machine is started, it will be restored from the saved state and continue execution from the same place you saved it at, which will let you continue your work immediately. Note that saving the machine state may take a long time, depending on the guest operating system type and the amount of memory you assigned to the virtual machine. S&end the shutdown signal Sends the ACPI Power Button press event to the virtual machine. Normally, the guest operating system running inside the virtual machine will detect this event and perform a clean shutdown procedure. This is a recommended way to turn off the virtual machine because all applications running inside it will get a chance to save their data and state. If the machine doesn't respond to this action then the guest operating system may be misconfigured or doesn't understand ACPI Power Button events at all. In this case you should select the Power off the machine action to stop virtual machine execution. Turns off the virtual machine. Note that this action will stop machine execution immediately so that the guest operating system running inside it will not be able to perform a clean shutdown procedure which may result in data loss inside the virtual machine. Selecting this action is recommended only if the virtual machine does not respond to the Send the shutdown signal action. When checked, the machine state will be restored from the state stored in the current snapshot right after it is turned off. This is useful if you are sure that you want to discard the results of your last sessions and go back to the current snapshot. VBoxConsoleWnd VirtualBox OSE فيرتول بوكس أوئِسئِي innotek VirtualBox إنُطِك فيرتول بوكس &Fullscreen Mode Switch to fullscreen mode Mouse Integration enable/disable... Auto-resize Guest Display enable/disable... Auto-resize &Guest Display Automatically resize the guest display when the window is resized (requires Guest Additions) &Adjust Window Size Adjust window size and position to best fit the guest display &Insert Ctrl-Alt-Del Send the Ctrl-Alt-Del sequence to the virtual machine &Insert Ctrl-Alt-Backspace Send the Ctrl-Alt-Backspace sequence to the virtual machine &Reset Reset the virtual machine ACPI S&hutdown Send the ACPI Power Button press event to the virtual machine &Close... Close the virtual machine Take &Snapshot... Take a snapshot of the virtual machine &Floppy Image... Mount a floppy image file Unmount F&loppy Unmount the currently mounted floppy media &CD/DVD-ROM Image... Mount a CD/DVD-ROM image file Unmount C&D/DVD-ROM Unmount the currently mounted CD/DVD-ROM media Remote Desktop (RDP) Server enable/disable... Remote Dis&play Enable or disable remote desktop (RDP) connections to this machine &Shared Folders... Open the dialog to operate on shared folders &Install Guest Additions... Mount the Guest Additions installation image &Statistics... &Command line... &VirtualBox Web Site... Open the browser and go to the VirtualBox product web site &About VirtualBox... Show a dialog with product information &Reset All Warnings Cause all suppressed warnings and messages to be shown again Mount &Floppy Mount &CD/DVD-ROM &USB Devices &Devices De&bug &Help &مساعدة Indicates whether the guest display auto-resize function is On (<img src=auto_resize_on_16px.png/>) or Off (<img src=auto_resize_off_16px.png/>). Note that this function requires Guest Additions to be installed in the guest OS. Indicates whether the host mouse pointer is captured by the guest OS: <img src=mouse_disabled_16px.png/>  pointer is not captured <img src=mouse_16px.png/>  pointer is captured <img src=mouse_seamless_16px.png/>  mouse integration (MI) is On <img src=mouse_can_seamless_16px.png/>  MI is Off, pointer is captured <img src=mouse_can_seamless_uncaptured_16px.png/>  MI is Off, pointer is not captured Note that the mouse integration feature requires Guest Additions to be installed in the guest OS. Shows the currently assigned Host key. This key, when pressed alone, toggles the the keyboard and mouse capture state. It can also be used in combination with other keys to quickly perform actions from the main menu. <hr>VRDP Server is listening on port %1 &Pause Suspend the execution of the virtual machine R&esume Resume the execution of the virtual machine Disable &Mouse Integration Temporarily disable host mouse pointer integration Enable &Mouse Integration Enable temporarily disabled host mouse pointer integration Snapshot %1 لقطة %1 Host Drive &Machine &Network Adapters Adapter %1 network Mount the selected physical drive of the host PC Floppy tip Mount the selected physical drive of the host PC CD/DVD tip Disconnect the cable from the selected virtual network adapter Connect the cable to the selected virtual network adapter Seam&less Mode Switch to seamless desktop integration mode Indicates whether the keyboard is captured by the guest OS (<img src=hostkey_captured_16px.png/>) or not (<img src=hostkey_16px.png/>). <qt>Indicates the activity of the floppy media:%1</qt> Floppy tooltip Host Drive: %1 Floppy tooltip Image: %1 Floppy tooltip No media mounted Floppy tooltip <qt>Indicates the activity of the CD/DVD-ROM media:%1</qt> DVD-ROM tooltip Host Drive: %1 DVD-ROM tooltip Image: %1 DVD-ROM tooltip No media mounted DVD-ROM tooltip <qt>Indicates the activity of virtual hard disks:%1</qt> HDD tooltip No hard disks attached HDD tooltip <qt>Indicates the activity of the network interfaces:%1</qt> Network adapters tooltip Adapter %1 (%2): cable %3 Network adapters tooltip connected Network adapters tooltip disconnected Network adapters tooltip All network adapters are disabled Network adapters tooltip <qt>Indicates the activity of the attached USB devices:%1</qt> USB device tooltip No USB devices attached USB device tooltip USB Controller is disabled USB device tooltip Indicates whether the Remote Display (VRDP Server) is enabled (<img src=vrdp_16px.png/>) or not (<img src=vrdp_disabled_16px.png/>). <qt>Indicates the activity of shared folders:%1</qt> Shared folders tooltip No shared folders Shared folders tooltip &Contents... &محتويات... F1 F1 Show the online help contents R&egister VirtualBox... Open VirtualBox registration form VBoxDiskImageManagerDlg Name إسم Virtual Size Actual Size Size Virtual Disk Manager &Hard Disks &CD/DVD Images &Floppy Images Help مساعدة F1 F1 Invoke dialog's help &OK &موافق Alt+O Alt+O Accept dialog Cancel إلغاء Cancel dialog -- no info -- &New... &جديد... &Add... &أظف... R&emove Re&lease Re&fresh أن&عش New جديد Add أظف Remove أزل Release Refresh أنعش Ctrl+N Ctrl+N Ctrl+A Ctrl+A Ctrl+D Ctrl+D Ctrl+L Ctrl+L Ctrl+R Ctrl+R &Actions Location Disk Type Storage Type Attached to Snapshot لقطة Checking accessibility %1 Checking accessibility... HDD %1 Disk type:  %2 Storage type:  %3 Attached to:  %1 HDD Snapshot:  %5 HDD %1 Error checking media accessibility HDD %1 %2 HDD %1 Checking accessibility... CD/DVD/Floppy %1 CD/DVD/Floppy Attached to:  %1 CD/DVD/Floppy %1 Error checking media accessibility CD/DVD/Floppy %1 %2 The image file is not accessible CD/DVD/Floppy &Select &حدِد All hard disk images (*.vdi; *.vmdk);;Virtual Disk images (*.vdi);;VMDK images (*.vmdk);;All files (*) Select a hard disk image file Select a CD/DVD-ROM disk image file Select a floppy disk image file Create a new virtual hard disk Add (register) an existing image file Remove (unregister) the selected media Release the selected media by detaching it from the machine Refresh the media list CD/DVD-ROM images (*.iso);;All files (*) Floppy images (*.img);;All files (*) VBoxDownloaderWgt Cancel إلغاء Downloading the VirtualBox Guest Additions CD image from %1... Cancel the VirtualBox Guest Additions CD image download Could not locate the file on the server (response: %1). Failed to save the downloaded file as %1. Select folder to save Guest Additions image to Connection timed out. The download process has been cancelled by the user. VBoxGlobal Differencing hard disk Unknown device %1:%2 USB device details Vendor ID: %1 Product ID: %2 Revision: %3 USB device tooltip Serial No. %1 USB device tooltip State: %1 USB device tooltip Name details report إسم OS Type details report Base Memory details report %3 MB details report General details report Video Memory details report %4 MB details report Boot Order details report ACPI details report IO APIC details report Not Attached details report (HDDs) Hard Disks details report Enabled details report (ACPI) مكِن Disabled details report (ACPI) عطِل Enabled details report (IO APIC) مكِن Disabled details report (IO APIC) عطِل Not mounted details report (floppy) Image details report (floppy) Host Drive details report (floppy) Floppy details report Not mounted details report (DVD) Image details report (DVD) Host Drive details report (DVD) CD/DVD-ROM details report Adapter details report (audio) Disabled details report (audio) عطِل Audio details report Adapter %1 details report (network) Disabled details report (network) عطِل Network details report Device Filters details report (USB) %1 (%2 active) details report (USB) Disabled details report (USB) عطِل VRDP Server Port details report (VRDP) %1 details report (VRDP) %1 Disabled details report (VRDP) عطِل Remote Display details report Opening URLs is not implemented yet. Powered Off MachineState Saved MachineState Aborted MachineState Running MachineState Paused MachineState Starting MachineState Stopping MachineState Saving MachineState Restoring MachineState Discarding MachineState Closed SessionState Open SessionState Spawning SessionState Closing SessionState None DeviceType Floppy DeviceType CD/DVD-ROM DeviceType Hard Disk DeviceType Network DeviceType Primary DiskControllerType Secondary DiskControllerType Normal DiskType Immutable DiskType Writethrough DiskType Virtual Disk Image DiskStorageType iSCSI DiskStorageType VMDK Image DiskStorageType Null VRDPAuthType External VRDPAuthType Guest VRDPAuthType Ignore USBFilterActionType تجاهل Hold USBFilterActionType Master DiskControllerDevice Slave DiskControllerDevice Device %1 DiskControllerDevice Null Audio Driver AudioDriverType Windows Multimedia AudioDriverType OSS Audio Driver AudioDriverType ALSA Audio Driver AudioDriverType Windows DirectSound AudioDriverType CoreAudio AudioDriverType Not attached NetworkAttachmentType NAT NetworkAttachmentType Host Interface NetworkAttachmentType Internal Network NetworkAttachmentType Not supported USBDeviceState Unavailable USBDeviceState Busy USBDeviceState Available USBDeviceState Held USBDeviceState Captured USBDeviceState Checking... hard disk Inaccessible hard disk Disabled ClipboardType عطِل Host To Guest ClipboardType Guest To Host ClipboardType Bidirectional ClipboardType Select a directory Select a file Port %1 details report (serial ports) Disabled details report (serial ports) عطِل Serial Ports details report USB details report Shared Folders details report (shared folders) %1 details report (shadef folders) %1 None details report (shared folders) Shared Folders details report Stuck MachineState Disconnected PortMode Host Pipe PortMode Host Device PortMode User-defined serial port Custom Hard Disk DiskStorageType VBoxGlobalSettings '%1 (0x%2)' is an invalid host key code. Cannot delete the key '%1'. The value '%1' of the key '%2' doesn't match the regexp constraint '%3'. VBoxGlobalSettingsDlg Category [id] [link] [name] Select a settings category from the list on the left side and move the mouse over a settings item to get more information. General 0 0 #general Input 1 1 #input USB 2 2 #usb Default &Folders Machines VDI files Select حدِد &Keyboard &Host Key &Auto capture keyboard Alt+A Alt+A &USB Device Filters Ins Add Empty (Ins) Alt+Ins Add From (Alt+Ins) Del Remove (Del) Removes the selected USB filter. Ctrl+Up Move Up (Ctrl+Up) Moves the selected USB filter up. Ctrl+Down Move Down (Ctrl+Down) Moves the selected USB filter down. Help مساعدة F1 F1 Displays the dialog help. Invalid settings detected &OK &موافق Alt+O Alt+O Accepts (saves) changes and closes the dialog. Cancel إلغاء Cancels changes and closes the dialog. Displays the key used as a Host Key in the VM window. Activate the entry field and press a new Host Key. Note that alphanumeric, cursor movement and editing keys cannot be used as a Host Key. New Filter %1 usb Language لغة Language لغة 3 3 #language &Interface Language Author(s): Language: لغة: (built-in) Language <unavailable> Language <unknown> Author(s) Default Language VirtualBox Preferences Displays the path to the default VDI folder. This folder is used, if not explicitly specified otherwise, when adding existing or creating new virtual hard disks. Resets the virtual machine folder path to the default value. The actual default path will be displayed after accepting the changes and opening this dialog again. Resets the VDI folder path to the default value. The actual default path will be displayed after accepting the changes and opening this dialog again. Displays the path to the default virtual machine folder. This folder is used, if not explicitly specified otherwise, when creating new virtual machines. Opens a dialog to select the default VDI folder. Opens a dialog to select the default virtual machine folder. When checked, the keyboard is automatically captured every time the VM window is activated. When the keyboard is captured, all keystrokes (including system ones like Alt-Tab) are directed to the VM. Lists all global USB filters. The checkbox to the left defines whether the particular filter is enabled or not. Adds a new USB filter with all fields initially set to empty strings. Note that such a filter will match any attached USB device. Adds a new USB filter with all fields set to the values of the selected USB device attached to the host PC. <qt>Lists all available user interface languages. The effective language is written in bold. Select Default to reset to the system default language.</qt> V&RDP Authentication Library Displays the path to the library that provides authentication for Remote Display (VRDP) clients. Opens a dialog to select the VRDP authentication library file. Resets the authentication library file to the default value. The actual default library file will be displayed after accepting the changes and opening this dialog again. &Extended Features Enable &VT-x/AMD-V Defines whether virtual machines should try to make use of the host CPU's hardware virtualization extensions such as Intel VT-x and AMD-V by default or not. VBoxLicenseViewer I &Agree I &Disagree VBoxLogSearchPanel Close the search panel Find Enter a search string here &Previous Alt+P Alt+P Search for the previous occurrence of the string &Next Search for the next occurrence of the string C&ase Sensitive Perform case sensitive search (when checked) String not found VBoxMediaComboBox <no hard disk> No hard disk VBoxNewHDWzd Create New Virtual Disk This wizard will help you to create a new virtual hard disk image for your virtual machine. Use the Next button to go to the next page of the wizard and the Back button to return to the previous page. Welcome to the Create New Virtual Disk Wizard! Select the type of virtual hard disk image you want to create. A dynamically expanding image initially occupies a very small amount of space on your physical hard disk. It will grow dynamically (up to the size specified) as the Guest OS claims disk space. A fixed-size image does not grow. It is stored in a file of approximately the same size as the size of the virtual hard disk. Image Type &Dynamically expanding image Alt+D Alt+D &Fixed-size image Alt+F Alt+F Virtual Disk Image Type Press the Select button to select the location and name of the file to store the virtual hard disk image or type a file name in the entry field. &Image File Name Select حدِد Select the size of the virtual hard disk image in megabytes. This size will be reported to the Guest OS as the size of the virtual hard disk. Image &Size Virtual Disk Location and Size You are going to create a new virtual hard disk image with the following parameters: If the above settings are correct, press the Finish button. Once you press it, a new hard disk image will be created. Summary %1 Bytes <table><tr><td>Type:</td><td>%1</td></tr><tr><td>Location:</td><td>%2</td></tr><tr><td>Size:</td><td>%3 (%4 Bytes)</td></tr></table> Hard disk images (*.vdi) Select a file for the new hard disk image file VBoxNewVMWzd Create New Virtual Machine This wizard will guide you through the steps that are necessary to create a new virtual machine for VirtualBox. Use the Next button to go the next page of the wizard and the Back button to return to the previous page. Welcome to the New Virtual Machine Wizard! Enter a name for the new virtual machine and select the type of the guest operating system you plan to install onto the virtual machine. The name of the virtual machine usually indicates its software and hardware configuration. It will be used by all VirtualBox components to identify your virtual machine. N&ame OS &Type VM Name and OS Type Select the amount of base memory (RAM) in megabytes to be allocated to the virtual machine. Base &Memory Size < = > MB Memory Select a hard disk image to be used as the boot hard disk of the virtual machine. You can either create a new hard disk using the New button or select an existing hard disk image from the drop-down list or by pressing the Existing button (to invoke the Virtual Disk Manager dialog). If you need a more complicated hard disk setup, you can also skip this step and attach hard disks later using the VM Settings dialog. B&oot Hard Disk (Primary Master) N&ew... E&xisting... Virtual Hard Disk You are going to create a new virtual machine with the following parameters: If the above is correct press the Finish button. Once you press it, a new virtual machine will be created. Note that you can alter these and all other setting of the created virtual machine at any time using the Settings dialog accessible through the menu of the main window. Summary <qt>%1 MB</qt> <tr><td>Name:</td><td>%1</td></tr><tr><td>OS Type:</td><td>%2</td></tr><tr><td>Base Memory:</td><td>%3 MB</td></tr> <tr><td>Boot Hard Disk:</td><td>%4</td></tr> The recommended base memory size is %1 MB. The recommended size of the boot hard disk is %1 MB. VBoxProblemReporter VirtualBox - Information msg box title VirtualBox - Question msg box title VirtualBox - Warning msg box title VirtualBox - Error msg box title VirtualBox - Critical Error msg box title Do not show this message again msg box flag Failed to open <tt>%1</tt>. Make sure your desktop environment can properly handle URLs of this type. Failed to initialize COM or to find the VirtualBox COM server. Most likely, the VirtualBox server is not running or failed to start.The application will now terminate. Failed to create the VirtualBox COM object.The application will now terminate. Failed to load the global GUI configuration.The application will now terminate. Failed to save the global GUI configuration. Failed to set global VirtualBox properties. Failed to access the USB subsystem. Failed to create a new virtual machine. Failed to create a new virtual machine %1. Failed to apply the settings to the virtual machine %1. Failed to save the settings of the virtual machine %1. Failed to load the settings of the virtual machine %1. Failed to start the virtual machine %1. Failed to pause the execution of the virtual machine %1. Failed to resume the execution of the virtual machine %1. Failed to save the state of the virtual machine %1. Failed to create a snapshot of the virtual machine %1. Failed to stop the virtual machine %1. Failed to remove the virtual machine %1. Failed to discard the saved state of the virtual machine %1. Failed to discard the current state of the virtual machine %1. Failed to discard the current snapshot and the current state of the virtual machine %1. There is no virtual machine named %1. Are you sure you want to permanently delete the virtual machine %1?This operation cannot be undone. Are you sure you want to unregister the inaccessible virtual machine %1?You will no longer be able to register it back from GUI. Are you sure you want to discard the saved state of the virtual machine %1?This operation is equivalent to resetting or powering off the machine without doing a proper shutdown by means of the guest OS. Releasing this media image will detach it from the following virtual machine(s): %1.Continue? The image file %1 already exists. You cannot create a new virtual hard disk that uses this file, because it can be already used by another virtual hard disk.Please specify a different image file name. Do you want to delete this hard disk's image file %1?If you select No then the virtual hard disk will be unregistered and removed from the collection, but the image file will be left on your physical disk.If you select Yes then the image file will be permanently deleted after unregistering the hard disk. This operation cannot be undone. Failed to delete the virtual hard disk image %1. Do you want to remove (unregister) the virtual hard disk %1? Failed to create the virtual hard disk image %1. Failed to attach a hard disk image with UUID %1 to the device slot %2 of the controller %3 of the machine %4. Failed to detach a hard disk image from the device slot %1 of the controller %2 of the machine %3. hard disk CD/DVD image floppy image Failed to register the %1 %2. Failed to unregister the %1 %2. Failed to create a new session. Failed to open a session for the virtual machine %1. Failed to get the accessibility state of the media %1. Some of the registered media may become inaccessible. Failed to attach the USB device %1 to the virtual machine %2. Failed to detach the USB device %1 from the virtual machine %2. Failed to create a shared folder %1 (pointing to %2) for the virtual machine %3. Failed to remove the shared folder %1 (pointing to %2) from the virtual machine %3. You have clicked the mouse inside the Virtual Machine display or pressed the host key. This will cause the Virtual Machine to capture the host mouse pointer (only if the mouse pointer integration is not currently supported by the guest OS) and the keyboard, which will make them unavailable to other applications running on your host machine.You can press the host key at any time to uncapture the keyboard and mouse (if it is captured) and return them to normal operation. The currently assigned host key is shown on the status bar at the bottom of the Virtual Machine window, next to the <img src=hostkey_16px.png/> icon. This icon, together with the mouse icon placed nearby, indicate the current keyboard and mouse capture state. You have the Auto capture keyboard option turned on. This will cause the Virtual Machine to automatically capture the keyboard every time the VM window is activated and make it unavailable to other applications running on your host machine: when the keyboard is captured, all keystrokes (including system ones like Alt-Tab) will be directed to the VM.You can press the host key at any time to uncapture the keyboard and mouse (if it is captured) and return them to normal operation. The currently assigned host key is shown on the status bar at the bottom of the Virtual Machine window, next to the <img src=hostkey_16px.png/> icon. This icon, together with the mouse icon placed nearby, indicate the current keyboard and mouse capture state. The Virtual Machine reports that the guest OS supports mouse pointer integration. This means that you do not need to capture the mouse pointer to be able to use it in your guest OS -- all mouse actions you perform when the mouse pointer is over the Virtual Machine's display are directly sent to the guest OS. If the mouse is currently captured, it will be automatically uncaptured.The mouse icon on the status bar will look like <img src=mouse_seamless_16px.png/> to inform you that mouse pointer integration is supported by the guest OS and is currently turned on.Note: Some applications may behave incorrectly in mouse pointer integration mode. You can always disable it for the current session (and enable it again) by selecting the corresponding action from the menu bar. The Virtual Machine reports that the guest OS does not support mouse pointer integration in the current video mode. You need to capture the mouse (by clicking over the VM display or pressing the host key) in order to use the mouse inside the guest OS. The Virtual Machine is currently in the Paused state and therefore does not accept any keyboard or mouse input. If you want to continue to work inside the VM, you need to resume it by selecting the corresponding action from the menu bar. One or more of the registered virtual hard disks, CD/DVD or floppy media are not currently accessible. As a result, you will not be able to operate virtual machines that use these media until they become accessible later.Press OK to open the Virtual Disk Manager window and see what media are inaccessible, or press Ignore to ignore this message. Cannot run VirtualBox in VM Selector mode due to local restrictions.The application will now terminate. Fatal Error runtime error info Non-Fatal Error runtime error info Warning runtime error info Error ID: runtime error info Severity: runtime error info A fatal error has occurred during virtual machine execution! The virtual machine will be powered off. It is suggested to use the clipboard to copy the following error message for further examination: An error has occurred during virtual machine execution! The error details are shown below. You can try to correct the described error and resume the virtual machine execution. The virtual machine execution may run into an error condition as described below. You may ignore this message, but it is suggested to perform an appropriate action to make sure the described error will not happen. Result Code: error info Component: error info Interface: error info Callee: error info Callee RC: error info Could not find a language file for the language %1 in the directory %2.The language will be temporarily reset to the system default language. Please go to the Preferences dialog which you can open from the File menu of the main VirtualBox window, and select one of the existing languages on the Language page. Could not load the language file %1. The language will be temporarily reset to English (built-in). Please go to the Preferences dialog which you can open from the File menu of the main VirtualBox window, and select one of the existing languages on the Language page. Failed to discard the snapshot %1 of the virtual machine %2. Failed to create the host network interface %1. Failed to remove the host network interface %1. VirtualBox Guest Additions installed in the Guest OS are too old: the installed version is %1, the expected version is %2. Some features that require Guest Additions (mouse integration, guest display auto-resize) will most likely stop working properly.Please update Guest Additions to the current version by choosing Install Guest Additions from the Devices menu. VirtualBox Guest Additions installed in the Guest OS are outdated: the installed version is %1, the expected version is %2. Some features that require Guest Additions (mouse integration, guest display auto-resize) may not work as expected.It is recommended to update Guest Additions to the current version by choosing Install Guest Additions from the Devices menu. VirtualBox Guest Additions installed in the Guest OS are too recent for this version of VirtualBox: the installed version is %1, the expected version is %2.Using a newer version of Additions with an older version of VirtualBox is not supported. Please install the current version of Guest Additions by choosing Install Guest Additions from the Devices menu. Failed to change the snapshot folder path of the virtual machine %1 to %2. Could not enter seamless mode due to insufficient guest video memory.You should configure the VM to have at least %1 of video memory. Failed to remove the shared folder %1 (pointing to %2) from the virtual machine %3.Please close all programs in the guest OS that may be using this shared folder and try again. Could not find the VirtualBox Guest Additions CD image file %1 or %2.Do you want to download this CD image from the Internet? Failed to download the VirtualBox Guest Additions CD image from <a href="%1">%2</a>.%3 Are you sure you want to download the VirtualBox Guest Additions CD image from <a href="%1">%2</a> (size %3 bytes)? The VirtualBox Guest Additions CD image has been successfully downloaded from <a href="%1">%2</a> and saved locally as %3.Do you want to register this CD image and mount it on the virtual CD/DVD drive? The virtual machine window will be now switched to fullscreen mode. You can go back to windowed mode at any time by pressing %1. Note that the Host key is currently defined as %1.Note that the main menu bar is hidden fullscreen mode. You can access it by pressing Host+Home. The virtual machine window will be now switched to Seamless mode. You can go back to windowed mode at any time by pressing %1. Note that the Host key is currently defined as %1.Note that the main menu bar is hidden seamless mode. You can access it by pressing Host+Home. The virtual machine window is optimized to work in %1 bit color mode but the color quality of the virtual display is currently set to %2 bit.Please open the display properties dialog of the guest OS and select a %3 bit color mode, if it is available, for best possible performance of the virtual video subsystem.Note. Some operating systems, like OS/2, may actually work in 32 bit mode but report it as 24 bit (16 million colors). You may try to select a different color quality to see if this message disappears or you can simply disable the message now if you are sure the required color quality (%4 bit) is not available in the given guest OS. A critical error has occurred while running the virtual machine and the machine execution has been stopped.For help, please see the Community section on <a href=http://www.virtualbox.org>http://www.virtualbox.org</a> or your support contract. Please provide the contents of the log file <tt>VBox.log</tt> and the image file <tt>VBox.png</tt>, which you can find in the %1 directory, as well as a description of what you were doing when this error happened. Note that you can also access the above files by selecting Show Log from the Machine menu of the main VirualBox window.Press OK if you want to power off the machine or press Ignore if you want to leave it as is for debugging. Please note that debugging requires special knowledge and tools, so it is recommended to press OK now. You didn't attach a hard disk to the new virtual machine. The machine will not be able to boot unless you attach a hard disk with a guest operating system or some other bootable media to it later using the machine settings dialog or the First Run Wizard.Do you want to continue? Failed to find license files in %1. Failed to open the license file %1. Check file permissions. Failed to send the ACPI Power Button press event to the virtual machine %1. Failed to connect to the VirtualBox online registration service.%1 Congratulations! You have been successfully registered as a user of VirtualBox.Thank you for finding time to fill out the registration form! Failed to register the VirtualBox product%1 VBoxRegistrationDlg VirtualBox Registration Dialog Please fill out this registration form to let us know that you use VirtualBox and, optionally, to keep you informed about VirtualBox news and updates.Enter your full name using Latin characters and your e-mail address to the fields below. Please note that innotek will use this information only to gather product usage statistics and to send you VirtualBox newsletters. In particular, innotek will never pass your data to third parties. Detailed information about how we use your personal data can be found in the Privacy Policy section of the VirtualBox Manual or on the <a href=http://www.virtualbox.org/wiki/PrivacyPolicy>Privacy Policy</a> page of the VirtualBox web-site. &Name &إسم Enter your full name using Latin characters. &E-mail Enter your valid e-mail address. &Please do not use this information to contact me Check this box if you do not want to receive mail from innotek at the e-mail address specified above. Welcome to the VirtualBox Registration Form! &Confirm Connection timed out. Could not locate the registration form on the server (response: %1). VBoxSFDialog Shared Folders OK موافق Cancel إلغاء Help مساعدة &OK &موافق VBoxSelectorWnd VirtualBox OSE فيرتول بوكس أوئِسئِي innotek VirtualBox &Details &تفاصيل Virtual &Disk Manager... Ctrl+D Ctrl+D Display the Virtual Disk Manager dialog Ctrl+G Ctrl+G Display the global settings dialog E&xit خ&روج Ctrl+Q Ctrl+Q Close application إغلاق البرنامج &New... &جديد... New جديد Ctrl+N Ctrl+N Create a new virtual machine &Settings... Settings Ctrl+S Ctrl+S Configure the selected virtual machine &Delete &حذف Delete حذف Delete the selected virtual machine D&iscard إ&لغاء Discard إلغاء Discard the saved state of the selected virtual machine &Refresh &أنعش Refresh أنعش Ctrl+R Ctrl+R Refresh the accessibility state of the selected virtual machine &Contents... &محتويات... F1 F1 Show the online help contents &VirtualBox Web Site... Open the browser and go to the VirtualBox product web site &About VirtualBox... Show a dialog with product information &Reset All Warnings Cause all suppressed warnings and messages to be shown again &File &ملف &VM ا&لألة الواقعية &Help &مساعدة &Snapshots &لقطات D&escription و&صف D&escription * و&صف * S&how أ&ظهر Show أظهر Switch to the window of the selected virtual machine S&tart إ&بدأ Start إبدأ Start the selected virtual machine <h3>Welcome to VirtualBox!</h3>The left part of this window is intended to display a list of all virtual machines on your computer. The list is empty now because you haven't created any virtual machines yet.<img src=welcome.png align=right/>In order to create a new virtual machine, press the New button in the main tool bar located at the top of the window.You can press the F1 key to get instant help, or visit <a href=http://www.virtualbox.org>www.virtualbox.org</a> for the latest information and news. &Preferences... global settings &Machine Show &Log... Show Log... Ctrl+L Ctrl+L Show the log files of the selected virtual machine R&egister VirtualBox... Open VirtualBox registration form VBoxSharedFoldersSettings Name إسم Path مسار VBoxUSBFilterSettings don't translate VBoxUSBFilterSettings Shared &Folders المجلدات ال&مشتركة <qt>Lists all shared folders accessible to this machine. Use <tt>net use x: \\vboxsvr\share</tt> to access a shared folder named share from a DOS-like OS, or <tt>mount -t vboxsf share mount_point</tt> to access it from a Linux OS. This feature requires Guest Additions.</qt> Add أظف Adds a new shared folder definition. Remove أزل Removes the selected shared folder definition. Machine Folders Transient Folders Name:  %1 Path:  %2 Edits the selected shared folder definition. VBoxSharedFoldersSettings don't translate Ins Add a new shared folder (Ins) Space Edit the selected shared folder (Space) Del Remove the selected shared folder (Del) VBoxSnapshotDetailsDlg VBoxSnapshotDetailsDlg VBoxSnapshotDetailsDlg Snapshot Details تفاصيل اللقطة &Name &إسم &Description &وصف &Machine Details &تفاصيل اﻷلة Help مساعدة F1 F1 &OK &موافق Alt+O Alt+O Cancel إلغاء Details of %1 (%2) تفاصيل %1 (%2) VBoxSnapshotsWgt [snapshot] [snapshot] VBoxSnapshotsWgt VBoxSnapshotsWgt snapshotActionGroup snapshotActionGroup Discard Snapshot إلغِ اللقطة &Discard Snapshot &إلغِ اللقطة Ctrl+Shift+D Ctrl+Shift+D curStateActionGroup curStateActionGroup Take Snapshot إلتقط لقطة Take &Snapshot إلتقط &لقطة Ctrl+Alt+S Ctrl+Alt+S Ctrl+Alt+D Ctrl+Alt+D Discard Current Snapshot and State D&iscard Current Snapshot and State Ctrl+Alt+Shift+D Ctrl+Alt+Shift+D Show Details S&how Details Space Current State (changed) Current State (Modified) Current State Current State (Unmodified) The current state differs from the state stored in the current snapshot The current state is identical to the state stored in the current snapshot (current, Snapshot details online) Snapshot details offline) Snapshot details Taken at %1 Snapshot (time) أخدت في %1 Taken on %1 Snapshot (date + time) أخدت في %1 %1 since %2 Current State (time or date + time) %1 مند %2 Snapshot %1 لقطة %1 Discard the selected snapshot of the virtual machine Ctrl+Shift+S Take a snapshot of the current virtual machine state Revert to Current Snapshot &Revert to Current Snapshot Ctrl+Shift+R Restore the virtual machine state from the state stored in the current snapshot Ctrl+Shift+B Discard the current snapshot and revert the machine to the state it had before the snapshot was taken Show details of the selected snapshot VBoxSwitchMenu Disable عطِل Enable مكِن %1 %2 %1 %2 VBoxTakeSnapshotDlg Take Snapshot of Virtual Machine إلتقط لقطة للألة الواقعية Snapshot &Name &إسم اللقطة Snapshot &Description &صفات اللقطة Help مساعدة F1 F1 &OK &موافق Alt+O Alt+O Cancel إلغاء VBoxUSBFilterSettings VBoxUSBFilterSettings don't translate VBoxUSBFilterSettings &Name &إسم Displays the filter name. &Manufacturer Pro&duct &Serial No. R&emote &Action &Vendor ID &Product ID &Revision Por&t Any remote أي Yes remote نعم No remote لا <qt>Defines the manufacturer filter as an exact match string. An empty string will match any value.</qt> <qt>Defines the product name filter as an exact match string. An empty string will match any value.</qt> <qt>Defines the serial number filter as an exact match string. An empty string will match any value.</qt> <qt>Defines whether this filter applies to USB devices attached locally to the host computer (No), to a VRDP client's computer (Yes), or both (Any).</qt> <qt>Defines an action performed by the host computer when a matching device is attached: give it up to the host OS (Ignore) or grab it for later usage by virtual machines (Hold).</qt> <qt>Defines the vendor ID filter. The exact match string format is <tt>XXXX</tt> where <tt>X</tt> is a hexadecimal digit. An empty string will match any value.</qt> <qt>Defines the product ID filter. The exact match string format is <tt>XXXX</tt> where <tt>X</tt> is a hexadecimal digit. An empty string will match any value.</qt> <qt>Defines the revision number filter. The exact match string format is <tt>IIFF</tt> where <tt>I</tt> is a decimal digit of the integer part and <tt>F</tt> is a decimal digit of the fractional part. An empty string will match any value.</qt> <qt>Defines the host USB port filter as an exact match string. An empty string will match any value.</qt> VBoxUSBMenu <no available devices> USB devices No supported devices connected to the host PC USB device tooltip VBoxVMDescriptionPage No description. Press the Edit button below to add it. Edit Edit (Ctrl+E) Ctrl+E Ctrl+E VBoxVMDetailsView The selected virtual machine is inaccessible. Please inspect the error message shown below and press the Refresh button if you want to repeat the accessibility check: اﻷلة الواقعية المختارة inaccessible. المرجوا التأكد من رسالة الخطأ البارزة أسفله ثم إظغط على زر Refresh إذا أردت إعادت الإختبار: VBoxVMFirstRunWzd First Run Wizard You have started a newly created virtual machine for the first time. This wizard will help you to perform the steps necessary for installing an operating system of your choice onto this virtual machine.Use the Next button to go to the next page of the wizard and the Back button to return to the previous page. You can also press Cancel if you want to cancel execution of this wizard. Welcome to the First Run Wizard! Select the type of the media you would like to use for installation purposes below. Media Type &CD/DVD-ROM Device Alt+C Alt+C &Floppy Device Alt+F Alt+F Select the media which contains the setup program of the operating system you want to install. This media must be bootable, otherwise the setup program will not be able to start. Media Source &Host Drive &Image File VDM Select Installation Media You have selected the following media to boot from: If the above is correct, press the Finish button. Once you press it, the selected media will be temporarily mounted on the virtual machine and the machine will start execution.Please note that when you close the virtual machine, the specified media will be automatically unmounted and the boot device will be set back to the first hard disk.Depending on the type of the setup program, you may need to manually unmount (eject) the media after the setup program reboots the virtual machine, to prevent the installation process from starting again. You can do this by selecting the corresponding Unmount... action in the Devices menu. Summary CD/DVD-ROM Device Floppy Device Host Drive %1 <table><tr><td>Type:</td><td>%1</td></tr><tr><td>Source:</td><td>%2</td></tr></table> You have started a newly created virtual machine for the first time. This wizard will help you to perform the steps necessary for booting an operating system of your choice on the virtual machine.Note that you will not be able to install an operating system into this virtual machine right now because you did not attach any hard disk to it. If this is not what you want, you can cancel execution of this wizard, select Settings from the Machine menu of the main VirtualBox window to access the settings dialog of this machine and change the hard disk configuration.Use the Next button to go to the next page of the wizard and the Back button to return to the previous page. You can also press Cancel if you want to cancel execution of this wizard. Select the type of the media you would like to use for booting an operating system. Select the media that contains the operating system you want to work with. This media must be bootable, otherwise the operating system will not be able to start. You have selected the following media to boot an operating system from: If the above is correct, press the Finish button. Once you press it, the selected media will be mounted on the virtual machine and the machine will start execution. VBoxVMListBox %1 %2 since %3 Session %4 VM tooltip (name, last state change, session state) %1 %2 مند %3 الجلسة %4 %1 Inaccessible since %2 Inaccessible VM tooltip (name, last state change) %1 متعذر بلوغه مند %2 Inaccessible متعذر بلوغه(ها) VBoxVMLogViewer Log Viewer &Save Alt+S Alt+S &Refresh &أنعش Alt+R Alt+R Alt+C Alt+C %1 - VirtualBox Log Viewer No log files found. Press the Refresh button to rescan the log folder %1. Save VirtualBox Log As Help مساعدة F1 F1 &Find Alt+F Alt+F Close VBoxVMNetworkSettings VBoxVMNetworkSettings &Enable Network Adapter &Attached to &MAC Address &Generate Alt+G Alt+G Generates a new random MAC address. Ca&ble Connected Alt+B Alt+B Host Interface Settings &Interface Name &File Descriptor &Setup Application Select حدِد &Terminate Application Add أظف Remove أزل Select TAP setup application Select TAP terminate application When checked, plugs this virtual network adapter into the virtual machine. Controls the way how this virtual adapter is attached to the real network of the Host OS. Indicates whether the virtual network cable is plugged in on machine startup or not. Displays the name of the host interface selected for this adapter. Displays the TAP interface name. Displays the command executed to set up the TAP interface. Selects the setup application. Displays the command executed to terminate the TAP interface. Selects the terminate application. Displays the MAC address of this adapter. It contains exactly 12 characters chosen from {0-9,A-F}. Note that the second character must be an even digit. VBoxVMSerialPortSettings VBoxVMSerialPortSettings &Enable Serial Port When checked, enables the given serial port of the virtual machine. Port &Number Displays the serial port number. You can choose one of the standard serial ports or select User-defined and specify port parameters manually. &IRQ Displays the IRQ number of this serial port. Valid values are integer numbers in range from <tt>0</tt> to <tt>255</tt>. Values greater than <tt>15</tt> may be used only if the IO APIC is enabled for this virtual machine. I/O Po&rt Displays the base I/O port address of this serial port. Valid values are integer numbers in range from <tt>0</tt> to <tt>0xFFFF</tt>. Port &Mode Controls the working mode of this serial port. If you select Disconnected, the guest OS will detect the serial port but will not be able to operate it. &Create Pipe Alt+C Alt+C If checked, the pipe specified in the Port Path field will be created by the virtual machine when it starts. Otherwise, the virtual machine will try to use the existing pipe. Port &Path Displays the path to the serial port's pipe on the host when the port works in Host Pipe mode, or the host serial device name when the port works in Host Device mode. VBoxVMSettingsDlg Category [id] [link] [name] VBoxVMSettingsDlg Select a settings category from the list on the left side and move the mouse over a settings item to get more information. General 0 0 #general Hard Disks 1 1 #hdds Floppy 2 3 #floppy CD/DVD-ROM 3 3 #dvd Audio 4 4 #audio Network 5 5 #network USB 6 6 #usb Remote Display 7 7 #vrdp Shared Folders 8 8 #sfolders &Identification &Name &إسم Displays the name of the virtual machine. OS &Type Base &Memory Size Controls the amount of memory provided to the virtual machine. If you assign too much, the machine might not start. < = > MB &Video Memory Size Controls the amount of video memory provided to the virtual machine. &Basic Select حدِد Selects the snapshot folder path. Reset Extended Features Enable A&CPI Alt+C Alt+C Enable IO A&PIC Alt+P Alt+P Boo&t Order &Advanced &Description &وصف &Primary Master <not selected> P&rimary Slave &Secondary (IDE 1) Slave &Mount Floppy Drive Host Floppy &Drive Alt+D Alt+D Mounts the specified host Floppy drive to the virtual Floppy drive. &Image File Alt+I Alt+I Mounts the specified Floppy image to the virtual Floppy drive. &Mount CD/DVD Drive Host CD/DVD &Drive Mounts the specified CD/DVD drive to the virtual CD/DVD drive. &ISO Image File Mounts the specified CD/DVD image to the virtual CD/DVD drive. &Enable Audio Host Audio &Driver Enable &USB Controller Alt+U Alt+U USB Device &Filters Ins Add Empty (Ins) Alt+Ins Add From (Alt+Ins) Del Remove (Del) Removes the selected USB filter. Ctrl+Up Ctrl+Up Move Up (Ctrl+Up) Move Up (Ctrl+Up) Moves the selected USB filter up. Ctrl+Down Ctrl+Down Move Down (Ctrl+Down) Moves the selected USB filter down. &Enable VRDP Server Defines the VRDP authentication method. Specifies the timeout for guest authentication, in milliseconds. Help مساعدة F1 F1 Displays the dialog help. Invalid settings detected &OK &موافق Alt+O Alt+O Accepts (saves) changes and closes the dialog. Cancel إلغاء Cancels changes and closes the dialog. When checked, attaches the specified virtual hard disk to the Master slot of the Primary IDE controller. When checked, attaches the specified virtual hard disk to the Slave slot of the Primary IDE controller. When checked, attaches the specified virtual hard disk to the Slave slot of the Secondary IDE controller. Displays the virtual hard disk to attach to this IDE slot and allows to quickly select a different hard disk. When checked, mounts the specified media to the CD/DVD drive of the virtual machine. Note that the CD/DVD drive is always connected to the Secondary Master IDE controller of the machine. Displays the image file to mount to the virtual CD/DVD drive and allows to quickly select a different image. When checked, mounts the specified media to the Floppy drive of the virtual machine. Displays the image file to mount to the virtual Floppy drive and allows to quickly select a different image. When checked, the virtual PCI audio card is plugged into the virtual machine that uses the specified driver to communicate to the host audio card. When checked, the VM will act as a Remote Desktop Protocol (RDP) server, allowing remote clients to connect and operate the VM (when it is running) using a standard RDP client. <qt>%1 MB</qt> <not attached> hard disk - Settings New Filter %1 usb &Shared Clipboard S&napshot Folder Displays the operating system type that you plan to install into this virtual machine (called a guest operating system). <qt>When checked, the virtual machine will support the Advanced Configuration and Power Management Interface (ACPI). Note: don't disable this feature after having installed a Windows guest operating system!</qt> <qt>When checked, the virtual machine will support the Input Output APIC (IO APIC), which may slightly decrease the VM performance. Note: don't disable this feature after having installed a Windows guest operating system!</qt> Defines the mode of sharing the clipboard between the guest and the host OS. Note that this feature requires Guest Additions to be installed in the guest OS. Displays the path where snapshots of this virtual machine will be stored. Note that snapshots can take quite a lot of disk space. Resets the snapshot folder path to the default value. The actual default path will be displayed after accepting the changes and opening this dialog again. Displays the description of the virtual machine. The description field is useful for commenting configuration details of the installed guest OS. Invokes the Virtual Disk Manager to create a new or select an existing virtual hard disk to attach. Lists host Floppy drives available to mount to the virtual machine. Invokes the Virtual Disk Manager to select a Floppy image to mount. Lists host CD/DVD drives available to mount to the virtual machine. Invokes the Virtual Disk Manager to select a CD/DVD image to mount. <qt>Controls the audio output driver. The Null Audio Driver makes the guest see an audio card, however every access to it will be ignored.</qt> When checked, enables the virtual USB controller of this machine. Lists all USB filters of this machine. The checkbox to the left defines whether the particular filter is enabled or not. Adds a new USB filter with all fields initially set to empty strings. Note that such a filter will match any attached USB device. Adds a new USB filter with all fields set to the values of the selected USB device attached to the host PC. Adapter %1 network Host &Interfaces Lists all available host interfaces. Adds a new host interface. Removes the selected host interface. <No suitable interfaces> Add أظف Remove أزل VirtualBox Host Interface %1 Do you want to remove the selected host network interface %1?Note: This interface may be in use by one or more network adapters of this or another VM. After it is removed, these adapters will no longer work until you correct their settings by either choosing a different interface name or a different adapter attachment type. 9 9 Serial Ports #serialPorts Enable &VT-x/AMD-V When checked, the virtual machine will try to make use of the host CPU's hardware virtualization extensions such as Intel VT-x and AMD-V. The grayed checkbox state means that this setting is determined by the value of the global setting. Other &Settings &Remember Media Mounted at Runtime Alt+R Alt+R If checked, any change to mounted CD/DVD or Floppy media performed during machine execution will be saved in the settings file in order to preserve the configuration of mounted media between runs. O&ther &Enable Passthrough When checked, allows the guest to send ATAPI commands directly to the host drive which makes it possible to use CD/DVD writers connected to the host inside the VM. Note that writing audio CD inside the VM is not yet supported. &Server Port Authentication &Method Authentication &Timeout <qt>Displays the VRDP Server port number. You may specify <tt>0</tt> (zero) to reset the port to the default value.</qt> Primary Master hard disk is not selected Primary Slave hard disk is not selected Primary Slave hard disk is already attached to a different slot Secondary Slave hard disk is not selected Secondary Slave hard disk is already attached to a different slot CD/DVD image file is not selected Floppy image file is not selected Incorrect host network interface is selected Duplicate port number is selected Duplicate port path is entered %1 on the %2 page. Port %1 serial ports