/* $Id: service.cpp 53624 2014-12-31 14:59:44Z vboxsync $ */ /** @file * Shared Clipboard: Host service entry points. */ /* * Copyright (C) 2006-2012 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /** @page pg_hostclip The Shared Clipboard Host Service * * The shared clipboard host service provides a proxy between the host's * clipboard and a similar proxy running on a guest. The service is split * into a platform-independent core and platform-specific backends. The * service defines two communication protocols - one to communicate with the * clipboard service running on the guest, and one to communicate with the * backend. These will be described in a very skeletal fashion here. * * @section sec_hostclip_guest_proto The guest communication protocol * * The guest clipboard service communicates with the host service via HGCM * (the host service runs as an HGCM service). The guest clipboard must * connect to the host service before all else (Windows hosts currently only * support one simultaneous connection). Once it has connected, it can send * HGCM messages to the host services, some of which will receive replies from * the host. The host can only reply to a guest message, it cannot initiate * any communication. The guest can in theory send any number of messages in * parallel (see the descriptions of the messages for the practice), and the * host will receive these in sequence, and may reply to them at once * (releasing the caller in the guest) or defer the reply until later. * * There are currently four messages defined. The first is * VBOX_SHARED_CLIPBOARD_FN_GET_HOST_MSG, which waits for a message from the * host. Host messages currently defined are * VBOX_SHARED_CLIPBOARD_HOST_MSG_QUIT (unused), * VBOX_SHARED_CLIPBOARD_HOST_MSG_READ_DATA (request that the guest send the * contents of its clipboard to the host) and * VBOX_SHARED_CLIPBOARD_HOST_MSG_FORMATS (to notify the guest that new * clipboard data is available). If a host message is sent while the guest is * not waiting, it will be queued until the guest requests it. At most one * host message of each type will be kept in the queue. The host code only * supports a single simultaneous VBOX_SHARED_CLIPBOARD_FN_GET_HOST_MSG call * from the guest. * * The second guest message is VBOX_SHARED_CLIPBOARD_FN_FORMATS, which tells * the host that the guest has new clipboard data available. The third is * VBOX_SHARED_CLIPBOARD_FN_READ_DATA, which asks the host to send its * clipboard data and waits until it arrives. The host supports at most one * simultaneous VBOX_SHARED_CLIPBOARD_FN_READ_DATA call from the guest - if a * second call is made before the first has returned, the first will be * aborted. * * The last guest message is VBOX_SHARED_CLIPBOARD_FN_WRITE_DATA, which is * used to send the contents of the guest clipboard to the host. This call * should be used after the host has requested data from the guest. * * @section sec_hostclip_backend_proto The communication protocol with the * platform-specific backend * * This section may be written in the future :) */ #include #include #include #include #include #include #include #include "VBoxClipboard.h" static void VBoxHGCMParmUInt32Set (VBOXHGCMSVCPARM *pParm, uint32_t u32) { pParm->type = VBOX_HGCM_SVC_PARM_32BIT; pParm->u.uint32 = u32; } static int VBoxHGCMParmUInt32Get (VBOXHGCMSVCPARM *pParm, uint32_t *pu32) { if (pParm->type == VBOX_HGCM_SVC_PARM_32BIT) { *pu32 = pParm->u.uint32; return VINF_SUCCESS; } return VERR_INVALID_PARAMETER; } #if 0 static void VBoxHGCMParmPtrSet (VBOXHGCMSVCPARM *pParm, void *pv, uint32_t cb) { pParm->type = VBOX_HGCM_SVC_PARM_PTR; pParm->u.pointer.size = cb; pParm->u.pointer.addr = pv; } #endif static int VBoxHGCMParmPtrGet (VBOXHGCMSVCPARM *pParm, void **ppv, uint32_t *pcb) { if (pParm->type == VBOX_HGCM_SVC_PARM_PTR) { *ppv = pParm->u.pointer.addr; *pcb = pParm->u.pointer.size; return VINF_SUCCESS; } return VERR_INVALID_PARAMETER; } static PVBOXHGCMSVCHELPERS g_pHelpers; static RTCRITSECT critsect; static uint32_t g_u32Mode; static PFNHGCMSVCEXT g_pfnExtension; static void *g_pvExtension; static VBOXCLIPBOARDCLIENTDATA *g_pClient; /* Serialization of data reading and format announcements from the RDP client. */ static bool g_fReadingData = false; static bool g_fDelayedAnnouncement = false; static uint32_t g_u32DelayedFormats = 0; /** Is the clipboard running in headless mode? */ static bool g_fHeadless = false; static uint32_t vboxSvcClipboardMode (void) { return g_u32Mode; } #ifdef UNIT_TEST /** Testing interface, getter for clipboard mode */ uint32_t TestClipSvcGetMode(void) { return vboxSvcClipboardMode(); } #endif /** Getter for headless setting */ bool vboxSvcClipboardGetHeadless(void) { return g_fHeadless; } static void vboxSvcClipboardModeSet (uint32_t u32Mode) { switch (u32Mode) { case VBOX_SHARED_CLIPBOARD_MODE_OFF: case VBOX_SHARED_CLIPBOARD_MODE_HOST_TO_GUEST: case VBOX_SHARED_CLIPBOARD_MODE_GUEST_TO_HOST: case VBOX_SHARED_CLIPBOARD_MODE_BIDIRECTIONAL: g_u32Mode = u32Mode; break; default: g_u32Mode = VBOX_SHARED_CLIPBOARD_MODE_OFF; } } bool vboxSvcClipboardLock (void) { return RT_SUCCESS(RTCritSectEnter (&critsect)); } void vboxSvcClipboardUnlock (void) { RTCritSectLeave (&critsect); } /* Set the HGCM parameters according to pending messages. * Executed under the clipboard lock. */ static bool vboxSvcClipboardReturnMsg (VBOXCLIPBOARDCLIENTDATA *pClient, VBOXHGCMSVCPARM paParms[]) { /* Message priority is taken into account. */ if (pClient->fMsgQuit) { LogRelFlow(("vboxSvcClipboardReturnMsg: Quit\n")); VBoxHGCMParmUInt32Set (&paParms[0], VBOX_SHARED_CLIPBOARD_HOST_MSG_QUIT); VBoxHGCMParmUInt32Set (&paParms[1], 0); pClient->fMsgQuit = false; } else if (pClient->fMsgReadData) { LogRelFlow(("vboxSvcClipboardReturnMsg: ReadData %02X\n", pClient->u32RequestedFormat)); VBoxHGCMParmUInt32Set (&paParms[0], VBOX_SHARED_CLIPBOARD_HOST_MSG_READ_DATA); VBoxHGCMParmUInt32Set (&paParms[1], pClient->u32RequestedFormat); pClient->fMsgReadData = false; } else if (pClient->fMsgFormats) { LogRelFlow(("vboxSvcClipboardReturnMsg: Formats %02X\n", pClient->u32AvailableFormats)); VBoxHGCMParmUInt32Set (&paParms[0], VBOX_SHARED_CLIPBOARD_HOST_MSG_FORMATS); VBoxHGCMParmUInt32Set (&paParms[1], pClient->u32AvailableFormats); pClient->fMsgFormats = false; } else { /* No pending messages. */ LogRelFlow(("vboxSvcClipboardReturnMsg: no message\n")); return false; } /* Message information assigned. */ return true; } void vboxSvcClipboardReportMsg (VBOXCLIPBOARDCLIENTDATA *pClient, uint32_t u32Msg, uint32_t u32Formats) { if (vboxSvcClipboardLock ()) { switch (u32Msg) { case VBOX_SHARED_CLIPBOARD_HOST_MSG_QUIT: { LogRelFlow(("vboxSvcClipboardReportMsg: Quit\n")); pClient->fMsgQuit = true; } break; case VBOX_SHARED_CLIPBOARD_HOST_MSG_READ_DATA: { if ( vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_GUEST_TO_HOST && vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_BIDIRECTIONAL) { /* Skip the message. */ break; } LogRelFlow(("vboxSvcClipboardReportMsg: ReadData %02X\n", u32Formats)); pClient->u32RequestedFormat = u32Formats; pClient->fMsgReadData = true; } break; case VBOX_SHARED_CLIPBOARD_HOST_MSG_FORMATS: { if ( vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_HOST_TO_GUEST && vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_BIDIRECTIONAL) { /* Skip the message. */ break; } LogRelFlow(("vboxSvcClipboardReportMsg: Formats %02X\n", u32Formats)); pClient->u32AvailableFormats = u32Formats; pClient->fMsgFormats = true; } break; default: { /* Invalid message. */ LogRelFlow(("vboxSvcClipboardReportMsg: invalid message %d\n", u32Msg)); } break; } if (pClient->fAsync) { /* The client waits for a response. */ bool fMessageReturned = vboxSvcClipboardReturnMsg (pClient, pClient->async.paParms); /* Make a copy of the handle. */ VBOXHGCMCALLHANDLE callHandle = pClient->async.callHandle; if (fMessageReturned) { /* There is a response. */ pClient->fAsync = false; } vboxSvcClipboardUnlock (); if (fMessageReturned) { LogRelFlow(("vboxSvcClipboardReportMsg: CallComplete\n")); g_pHelpers->pfnCallComplete (callHandle, VINF_SUCCESS); } } else { vboxSvcClipboardUnlock (); } } } static int svcInit (void) { int rc = RTCritSectInit (&critsect); if (RT_SUCCESS (rc)) { vboxSvcClipboardModeSet (VBOX_SHARED_CLIPBOARD_MODE_OFF); rc = vboxClipboardInit (); /* Clean up on failure, because 'svnUnload' will not be called * if the 'svcInit' returns an error. */ if (RT_FAILURE (rc)) { RTCritSectDelete (&critsect); } } return rc; } static DECLCALLBACK(int) svcUnload (void *) { vboxClipboardDestroy (); RTCritSectDelete (&critsect); return VINF_SUCCESS; } /** * Disconnect the host side of the shared clipboard and send a "host disconnected" message * to the guest side. */ static DECLCALLBACK(int) svcDisconnect (void *, uint32_t u32ClientID, void *pvClient) { VBOXCLIPBOARDCLIENTDATA *pClient = (VBOXCLIPBOARDCLIENTDATA *)pvClient; LogRel2(("svcDisconnect: u32ClientID = %d\n", u32ClientID)); vboxSvcClipboardReportMsg (pClient, VBOX_SHARED_CLIPBOARD_HOST_MSG_QUIT, 0); vboxSvcClipboardCompleteReadData(pClient, VERR_NO_DATA, 0); vboxClipboardDisconnect (pClient); memset (pClient, 0, sizeof (*pClient)); g_pClient = NULL; return VINF_SUCCESS; } static DECLCALLBACK(int) svcConnect (void *, uint32_t u32ClientID, void *pvClient) { VBOXCLIPBOARDCLIENTDATA *pClient = (VBOXCLIPBOARDCLIENTDATA *)pvClient; int rc = VINF_SUCCESS; /* If there is already a client connected then we want to release it first. */ if (g_pClient != NULL) { uint32_t u32OldClientID = g_pClient->u32ClientID; svcDisconnect(NULL, u32OldClientID, g_pClient); /* And free the resources in the hgcm subsystem. */ g_pHelpers->pfnDisconnectClient(g_pHelpers->pvInstance, u32OldClientID); } /* Register the client. */ memset (pClient, 0, sizeof (*pClient)); pClient->u32ClientID = u32ClientID; rc = vboxClipboardConnect (pClient, vboxSvcClipboardGetHeadless()); if (RT_SUCCESS (rc)) { g_pClient = pClient; } LogRel2(("vboxClipboardConnect: rc = %Rrc\n", rc)); return rc; } static DECLCALLBACK(void) svcCall (void *, VBOXHGCMCALLHANDLE callHandle, uint32_t u32ClientID, void *pvClient, uint32_t u32Function, uint32_t cParms, VBOXHGCMSVCPARM paParms[]) { int rc = VINF_SUCCESS; LogRel2(("svcCall: u32ClientID = %d, fn = %d, cParms = %d, pparms = %d\n", u32ClientID, u32Function, cParms, paParms)); VBOXCLIPBOARDCLIENTDATA *pClient = (VBOXCLIPBOARDCLIENTDATA *)pvClient; bool fAsynchronousProcessing = false; #ifdef DEBUG uint32_t i; for (i = 0; i < cParms; i++) { /** @todo parameters other than 32 bit */ LogRel2((" pparms[%d]: type %d value %d\n", i, paParms[i].type, paParms[i].u.uint32)); } #endif switch (u32Function) { case VBOX_SHARED_CLIPBOARD_FN_GET_HOST_MSG: { /* The quest requests a host message. */ LogRel2(("svcCall: VBOX_SHARED_CLIPBOARD_FN_GET_HOST_MSG\n")); if (cParms != VBOX_SHARED_CLIPBOARD_CPARMS_GET_HOST_MSG) { rc = VERR_INVALID_PARAMETER; } else if ( paParms[0].type != VBOX_HGCM_SVC_PARM_32BIT /* msg */ || paParms[1].type != VBOX_HGCM_SVC_PARM_32BIT /* formats */ ) { rc = VERR_INVALID_PARAMETER; } else { /* Atomically verify the client's state. */ if (vboxSvcClipboardLock ()) { bool fMessageReturned = vboxSvcClipboardReturnMsg (pClient, paParms); if (fMessageReturned) { /* Just return to the caller. */ pClient->fAsync = false; } else { /* No event available at the time. Process asynchronously. */ fAsynchronousProcessing = true; pClient->fAsync = true; pClient->async.callHandle = callHandle; pClient->async.paParms = paParms; LogRel2(("svcCall: async.\n")); } vboxSvcClipboardUnlock (); } else { rc = VERR_NOT_SUPPORTED; } } } break; case VBOX_SHARED_CLIPBOARD_FN_FORMATS: { /* The guest reports that some formats are available. */ LogRel2(("svcCall: VBOX_SHARED_CLIPBOARD_FN_FORMATS\n")); if (cParms != VBOX_SHARED_CLIPBOARD_CPARMS_FORMATS) { rc = VERR_INVALID_PARAMETER; } else if ( paParms[0].type != VBOX_HGCM_SVC_PARM_32BIT /* formats */ ) { rc = VERR_INVALID_PARAMETER; } else { uint32_t u32Formats; rc = VBoxHGCMParmUInt32Get (&paParms[0], &u32Formats); if (RT_SUCCESS (rc)) { if ( vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_GUEST_TO_HOST && vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_BIDIRECTIONAL) { rc = VERR_NOT_SUPPORTED; break; } if (g_pfnExtension) { VBOXCLIPBOARDEXTPARMS parms; parms.u32Format = u32Formats; g_pfnExtension (g_pvExtension, VBOX_CLIPBOARD_EXT_FN_FORMAT_ANNOUNCE, &parms, sizeof (parms)); } else { vboxClipboardFormatAnnounce (pClient, u32Formats); } } } } break; case VBOX_SHARED_CLIPBOARD_FN_READ_DATA: { /* The guest wants to read data in the given format. */ LogRel2(("svcCall: VBOX_SHARED_CLIPBOARD_FN_READ_DATA\n")); if (cParms != VBOX_SHARED_CLIPBOARD_CPARMS_READ_DATA) { rc = VERR_INVALID_PARAMETER; } else if ( paParms[0].type != VBOX_HGCM_SVC_PARM_32BIT /* format */ || paParms[1].type != VBOX_HGCM_SVC_PARM_PTR /* ptr */ || paParms[2].type != VBOX_HGCM_SVC_PARM_32BIT /* size */ ) { rc = VERR_INVALID_PARAMETER; } else { uint32_t u32Format; void *pv; uint32_t cb; rc = VBoxHGCMParmUInt32Get (&paParms[0], &u32Format); if (RT_SUCCESS (rc)) { rc = VBoxHGCMParmPtrGet (&paParms[1], &pv, &cb); if (RT_SUCCESS (rc)) { if ( vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_HOST_TO_GUEST && vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_BIDIRECTIONAL) { rc = VERR_NOT_SUPPORTED; break; } uint32_t cbActual = 0; if (g_pfnExtension) { VBOXCLIPBOARDEXTPARMS parms; parms.u32Format = u32Format; parms.u.pvData = pv; parms.cbData = cb; g_fReadingData = true; rc = g_pfnExtension (g_pvExtension, VBOX_CLIPBOARD_EXT_FN_DATA_READ, &parms, sizeof (parms)); LogRelFlow(("DATA: g_fDelayedAnnouncement = %d, g_u32DelayedFormats = 0x%x\n", g_fDelayedAnnouncement, g_u32DelayedFormats)); if (g_fDelayedAnnouncement) { vboxSvcClipboardReportMsg (g_pClient, VBOX_SHARED_CLIPBOARD_HOST_MSG_FORMATS, g_u32DelayedFormats); g_fDelayedAnnouncement = false; g_u32DelayedFormats = 0; } g_fReadingData = false; if (RT_SUCCESS (rc)) { cbActual = parms.cbData; } } else { /* Release any other pending read, as we only * support one pending read at one time. */ vboxSvcClipboardCompleteReadData(pClient, VERR_NO_DATA, 0); rc = vboxClipboardReadData (pClient, u32Format, pv, cb, &cbActual); } /* Remember our read request until it is completed. * See the protocol description above for more * information. */ if (rc == VINF_HGCM_ASYNC_EXECUTE) { if (vboxSvcClipboardLock()) { pClient->asyncRead.callHandle = callHandle; pClient->asyncRead.paParms = paParms; pClient->fReadPending = true; fAsynchronousProcessing = true; vboxSvcClipboardUnlock(); } else rc = VERR_NOT_SUPPORTED; } else if (RT_SUCCESS (rc)) { VBoxHGCMParmUInt32Set (&paParms[2], cbActual); } } } } } break; case VBOX_SHARED_CLIPBOARD_FN_WRITE_DATA: { /* The guest writes the requested data. */ LogRel2(("svcCall: VBOX_SHARED_CLIPBOARD_FN_WRITE_DATA\n")); if (cParms != VBOX_SHARED_CLIPBOARD_CPARMS_WRITE_DATA) { rc = VERR_INVALID_PARAMETER; } else if ( paParms[0].type != VBOX_HGCM_SVC_PARM_32BIT /* format */ || paParms[1].type != VBOX_HGCM_SVC_PARM_PTR /* ptr */ ) { rc = VERR_INVALID_PARAMETER; } else { void *pv; uint32_t cb; uint32_t u32Format; rc = VBoxHGCMParmUInt32Get (&paParms[0], &u32Format); if (RT_SUCCESS (rc)) { rc = VBoxHGCMParmPtrGet (&paParms[1], &pv, &cb); if (RT_SUCCESS (rc)) { if ( vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_GUEST_TO_HOST && vboxSvcClipboardMode () != VBOX_SHARED_CLIPBOARD_MODE_BIDIRECTIONAL) { rc = VERR_NOT_SUPPORTED; break; } if (g_pfnExtension) { VBOXCLIPBOARDEXTPARMS parms; parms.u32Format = u32Format; parms.u.pvData = pv; parms.cbData = cb; g_pfnExtension (g_pvExtension, VBOX_CLIPBOARD_EXT_FN_DATA_WRITE, &parms, sizeof (parms)); } else { vboxClipboardWriteData (pClient, pv, cb, u32Format); } } } } } break; default: { rc = VERR_NOT_IMPLEMENTED; } } LogRelFlow(("svcCall: rc = %Rrc\n", rc)); if (!fAsynchronousProcessing) { g_pHelpers->pfnCallComplete (callHandle, rc); } } /** If the client in the guest is waiting for a read operation to complete * then complete it, otherwise return. See the protocol description in the * shared clipboard module description. */ void vboxSvcClipboardCompleteReadData(VBOXCLIPBOARDCLIENTDATA *pClient, int rc, uint32_t cbActual) { VBOXHGCMCALLHANDLE callHandle = NULL; VBOXHGCMSVCPARM *paParms = NULL; bool fReadPending = false; if (vboxSvcClipboardLock()) /* if not can we do anything useful? */ { callHandle = pClient->asyncRead.callHandle; paParms = pClient->asyncRead.paParms; fReadPending = pClient->fReadPending; pClient->fReadPending = false; vboxSvcClipboardUnlock(); } if (fReadPending) { VBoxHGCMParmUInt32Set (&paParms[2], cbActual); g_pHelpers->pfnCallComplete (callHandle, rc); } } /* * We differentiate between a function handler for the guest and one for the host. */ static DECLCALLBACK(int) svcHostCall (void *, uint32_t u32Function, uint32_t cParms, VBOXHGCMSVCPARM paParms[]) { int rc = VINF_SUCCESS; LogRel2(("svcHostCall: fn = %d, cParms = %d, pparms = %d\n", u32Function, cParms, paParms)); switch (u32Function) { case VBOX_SHARED_CLIPBOARD_HOST_FN_SET_MODE: { LogRel2(("svcCall: VBOX_SHARED_CLIPBOARD_HOST_FN_SET_MODE\n")); if (cParms != 1) { rc = VERR_INVALID_PARAMETER; } else if ( paParms[0].type != VBOX_HGCM_SVC_PARM_32BIT /* mode */ ) { rc = VERR_INVALID_PARAMETER; } else { uint32_t u32Mode = VBOX_SHARED_CLIPBOARD_MODE_OFF; rc = VBoxHGCMParmUInt32Get (&paParms[0], &u32Mode); /* The setter takes care of invalid values. */ vboxSvcClipboardModeSet (u32Mode); } } break; case VBOX_SHARED_CLIPBOARD_HOST_FN_SET_HEADLESS: { uint32_t u32Headless = g_fHeadless; rc = VERR_INVALID_PARAMETER; if (cParms != 1) break; rc = VBoxHGCMParmUInt32Get (&paParms[0], &u32Headless); if (RT_SUCCESS(rc)) LogRelFlow(("svcCall: VBOX_SHARED_CLIPBOARD_HOST_FN_SET_HEADLESS, u32Headless=%u\n", (unsigned) u32Headless)); g_fHeadless = RT_BOOL(u32Headless); } break; default: break; } LogRelFlow(("svcHostCall: rc = %Rrc\n", rc)); return rc; } /** * SSM descriptor table for the VBOXCLIPBOARDCLIENTDATA structure. */ static SSMFIELD const g_aClipboardClientDataFields[] = { SSMFIELD_ENTRY(VBOXCLIPBOARDCLIENTDATA, u32ClientID), /* for validation purposes */ SSMFIELD_ENTRY(VBOXCLIPBOARDCLIENTDATA, fMsgQuit), SSMFIELD_ENTRY(VBOXCLIPBOARDCLIENTDATA, fMsgReadData), SSMFIELD_ENTRY(VBOXCLIPBOARDCLIENTDATA, fMsgFormats), SSMFIELD_ENTRY(VBOXCLIPBOARDCLIENTDATA, u32RequestedFormat), SSMFIELD_ENTRY_TERM() }; static DECLCALLBACK(int) svcSaveState(void *, uint32_t u32ClientID, void *pvClient, PSSMHANDLE pSSM) { #ifndef UNIT_TEST /* * When the state will be restored, pending requests will be reissued * by VMMDev. The service therefore must save state as if there were no * pending request. * Pending requests, if any, will be completed in svcDisconnect. */ LogRel2 (("svcSaveState: u32ClientID = %d\n", u32ClientID)); VBOXCLIPBOARDCLIENTDATA *pClient = (VBOXCLIPBOARDCLIENTDATA *)pvClient; /* This field used to be the length. We're using it as a version field with the high bit set. */ SSMR3PutU32 (pSSM, UINT32_C (0x80000002)); int rc = SSMR3PutStructEx (pSSM, pClient, sizeof(*pClient), 0 /*fFlags*/, &g_aClipboardClientDataFields[0], NULL); AssertRCReturn (rc, rc); #endif /* !UNIT_TEST */ return VINF_SUCCESS; } /** * This structure corresponds to the original layout of the * VBOXCLIPBOARDCLIENTDATA structure. As the structure was saved as a whole * when saving state, we need to remember it forever in order to preserve * compatibility. * * (Starting with 3.1 this is no longer used.) * * @remarks Putting this outside svcLoadState to avoid visibility warning caused * by -Wattributes. */ typedef struct CLIPSAVEDSTATEDATA { struct CLIPSAVEDSTATEDATA *pNext; struct CLIPSAVEDSTATEDATA *pPrev; VBOXCLIPBOARDCONTEXT *pCtx; uint32_t u32ClientID; bool fAsync: 1; /* Guest is waiting for a message. */ bool fMsgQuit: 1; bool fMsgReadData: 1; bool fMsgFormats: 1; struct { VBOXHGCMCALLHANDLE callHandle; VBOXHGCMSVCPARM *paParms; } async; struct { void *pv; uint32_t cb; uint32_t u32Format; } data; uint32_t u32AvailableFormats; uint32_t u32RequestedFormat; } CLIPSAVEDSTATEDATA; static DECLCALLBACK(int) svcLoadState(void *, uint32_t u32ClientID, void *pvClient, PSSMHANDLE pSSM) { #ifndef UNIT_TEST LogRel2 (("svcLoadState: u32ClientID = %d\n", u32ClientID)); VBOXCLIPBOARDCLIENTDATA *pClient = (VBOXCLIPBOARDCLIENTDATA *)pvClient; /* Existing client can not be in async state yet. */ Assert (!pClient->fAsync); /* Save the client ID for data validation. */ /** @todo isn't this the same as u32ClientID? Playing safe for now... */ uint32_t const u32ClientIDOld = pClient->u32ClientID; /* Restore the client data. */ uint32_t lenOrVer; int rc = SSMR3GetU32 (pSSM, &lenOrVer); AssertRCReturn (rc, rc); if (lenOrVer == UINT32_C (0x80000002)) { rc = SSMR3GetStructEx (pSSM, pClient, sizeof(*pClient), 0 /*fFlags*/, &g_aClipboardClientDataFields[0], NULL); AssertRCReturn (rc, rc); } else if (lenOrVer == (SSMR3HandleHostBits (pSSM) == 64 ? 72 : 48)) { /** * SSM descriptor table for the CLIPSAVEDSTATEDATA structure. */ static SSMFIELD const s_aClipSavedStateDataFields30[] = { SSMFIELD_ENTRY_IGN_HCPTR( CLIPSAVEDSTATEDATA, pNext), SSMFIELD_ENTRY_IGN_HCPTR( CLIPSAVEDSTATEDATA, pPrev), SSMFIELD_ENTRY_IGN_HCPTR( CLIPSAVEDSTATEDATA, pCtx), SSMFIELD_ENTRY( CLIPSAVEDSTATEDATA, u32ClientID), SSMFIELD_ENTRY_CUSTOM(fMsgQuit+fMsgReadData+fMsgFormats, RT_OFFSETOF(CLIPSAVEDSTATEDATA, u32ClientID) + 4, 4), SSMFIELD_ENTRY_IGN_HCPTR( CLIPSAVEDSTATEDATA, async.callHandle), SSMFIELD_ENTRY_IGN_HCPTR( CLIPSAVEDSTATEDATA, async.paParms), SSMFIELD_ENTRY_IGNORE( CLIPSAVEDSTATEDATA, data.pv), SSMFIELD_ENTRY_IGNORE( CLIPSAVEDSTATEDATA, data.cb), SSMFIELD_ENTRY_IGNORE( CLIPSAVEDSTATEDATA, data.u32Format), SSMFIELD_ENTRY_IGNORE( CLIPSAVEDSTATEDATA, u32AvailableFormats), SSMFIELD_ENTRY( CLIPSAVEDSTATEDATA, u32RequestedFormat), SSMFIELD_ENTRY_TERM() }; CLIPSAVEDSTATEDATA savedState; RT_ZERO (savedState); rc = SSMR3GetStructEx (pSSM, &savedState, sizeof(savedState), SSMSTRUCT_FLAGS_MEM_BAND_AID, &s_aClipSavedStateDataFields30[0], NULL); AssertRCReturn (rc, rc); pClient->fMsgQuit = savedState.fMsgQuit; pClient->fMsgReadData = savedState.fMsgReadData; pClient->fMsgFormats = savedState.fMsgFormats; pClient->u32RequestedFormat = savedState.u32RequestedFormat; } else { LogRel (("Client data size mismatch: got %#x\n", lenOrVer)); return VERR_SSM_DATA_UNIT_FORMAT_CHANGED; } /* Verify the client ID. */ if (pClient->u32ClientID != u32ClientIDOld) { LogRel (("Client ID mismatch: expected %d, got %d\n", u32ClientIDOld, pClient->u32ClientID)); pClient->u32ClientID = u32ClientIDOld; return VERR_SSM_DATA_UNIT_FORMAT_CHANGED; } /* Actual host data are to be reported to guest (SYNC). */ vboxClipboardSync (pClient); #endif /* !UNIT_TEST */ return VINF_SUCCESS; } static DECLCALLBACK(int) extCallback (uint32_t u32Function, uint32_t u32Format, void *pvData, uint32_t cbData) { if (g_pClient != NULL) { switch (u32Function) { case VBOX_CLIPBOARD_EXT_FN_FORMAT_ANNOUNCE: { LogRelFlow(("ANNOUNCE: g_fReadingData = %d\n", g_fReadingData)); if (g_fReadingData) { g_fDelayedAnnouncement = true; g_u32DelayedFormats = u32Format; } else { vboxSvcClipboardReportMsg (g_pClient, VBOX_SHARED_CLIPBOARD_HOST_MSG_FORMATS, u32Format); } } break; case VBOX_CLIPBOARD_EXT_FN_DATA_READ: { vboxSvcClipboardReportMsg (g_pClient, VBOX_SHARED_CLIPBOARD_HOST_MSG_READ_DATA, u32Format); } break; default: return VERR_NOT_SUPPORTED; } } return VINF_SUCCESS; } static DECLCALLBACK(int) svcRegisterExtension(void *, PFNHGCMSVCEXT pfnExtension, void *pvExtension) { LogRelFlowFunc(("pfnExtension = %p\n", pfnExtension)); VBOXCLIPBOARDEXTPARMS parms; if (pfnExtension) { /* Install extension. */ g_pfnExtension = pfnExtension; g_pvExtension = pvExtension; parms.u.pfnCallback = extCallback; g_pfnExtension (g_pvExtension, VBOX_CLIPBOARD_EXT_FN_SET_CALLBACK, &parms, sizeof (parms)); } else { if (g_pfnExtension) { parms.u.pfnCallback = NULL; g_pfnExtension (g_pvExtension, VBOX_CLIPBOARD_EXT_FN_SET_CALLBACK, &parms, sizeof (parms)); } /* Uninstall extension. */ g_pfnExtension = NULL; g_pvExtension = NULL; } return VINF_SUCCESS; } extern "C" DECLCALLBACK(DECLEXPORT(int)) VBoxHGCMSvcLoad (VBOXHGCMSVCFNTABLE *ptable) { int rc = VINF_SUCCESS; LogRelFlowFunc(("ptable = %p\n", ptable)); if (!ptable) { rc = VERR_INVALID_PARAMETER; } else { LogRel2(("VBoxHGCMSvcLoad: ptable->cbSize = %d, ptable->u32Version = 0x%08X\n", ptable->cbSize, ptable->u32Version)); if ( ptable->cbSize != sizeof (VBOXHGCMSVCFNTABLE) || ptable->u32Version != VBOX_HGCM_SVC_VERSION) { rc = VERR_INVALID_PARAMETER; } else { g_pHelpers = ptable->pHelpers; ptable->cbClient = sizeof (VBOXCLIPBOARDCLIENTDATA); ptable->pfnUnload = svcUnload; ptable->pfnConnect = svcConnect; ptable->pfnDisconnect = svcDisconnect; ptable->pfnCall = svcCall; ptable->pfnHostCall = svcHostCall; ptable->pfnSaveState = svcSaveState; ptable->pfnLoadState = svcLoadState; ptable->pfnRegisterExtension = svcRegisterExtension; ptable->pvService = NULL; /* Service specific initialization. */ rc = svcInit (); } } return rc; }