/* $Id: proxy.c 56300 2015-06-09 14:36:22Z vboxsync $ */ /** @file * NAT Network - proxy setup and utilities. */ /* * Copyright (C) 2013-2015 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ #define LOG_GROUP LOG_GROUP_NAT_SERVICE #include "winutils.h" #include "proxy.h" #include "proxy_pollmgr.h" #include "portfwd.h" #include "lwip/opt.h" #include "lwip/sys.h" #include "lwip/tcpip.h" #ifndef RT_OS_WINDOWS #include #include #include #include #include #include #include #include #include #else # include #endif #if defined(SOCK_NONBLOCK) && defined(RT_OS_NETBSD) /* XXX: PR kern/47569 */ # undef SOCK_NONBLOCK #endif #ifndef __arraycount # define __arraycount(a) (sizeof(a)/sizeof(a[0])) #endif static FNRTSTRFORMATTYPE proxy_sockerr_rtstrfmt; static SOCKET proxy_create_socket(int, int); volatile struct proxy_options *g_proxy_options; static sys_thread_t pollmgr_tid; /* XXX: for mapping loopbacks to addresses in our network (ip4) */ struct netif *g_proxy_netif; /* * Called on the lwip thread (aka tcpip thread) from tcpip_init() via * its "tcpip_init_done" callback. Raw API is ok to use here * (e.g. rtadvd), but netconn API is not. */ void proxy_init(struct netif *proxy_netif, struct proxy_options *opts) { int status; LWIP_ASSERT1(opts != NULL); LWIP_UNUSED_ARG(proxy_netif); status = RTStrFormatTypeRegister("sockerr", proxy_sockerr_rtstrfmt, NULL); AssertRC(status); g_proxy_options = opts; g_proxy_netif = proxy_netif; #if 1 proxy_rtadvd_start(proxy_netif); #endif /* * XXX: We use stateless DHCPv6 only to report IPv6 address(es) of * nameserver(s). Since we don't yet support IPv6 addresses in * HostDnsService, there's no point in running DHCPv6. */ #if 0 dhcp6ds_init(proxy_netif); #endif if (opts->tftp_root != NULL) { tftpd_init(proxy_netif, opts->tftp_root); } status = pollmgr_init(); if (status < 0) { errx(EXIT_FAILURE, "failed to initialize poll manager"); /* NOTREACHED */ } pxtcp_init(); pxudp_init(); portfwd_init(); pxdns_init(proxy_netif); pxping_init(proxy_netif, opts->icmpsock4, opts->icmpsock6); pollmgr_tid = sys_thread_new("pollmgr_thread", pollmgr_thread, NULL, DEFAULT_THREAD_STACKSIZE, DEFAULT_THREAD_PRIO); if (!pollmgr_tid) { errx(EXIT_FAILURE, "failed to create poll manager thread"); /* NOTREACHED */ } } #if !defined(RT_OS_WINDOWS) /** * Formatter for %R[sockerr] - unix strerror_r() version. */ static DECLCALLBACK(size_t) proxy_sockerr_rtstrfmt(PFNRTSTROUTPUT pfnOutput, void *pvArgOutput, const char *pszType, const void *pvValue, int cchWidth, int cchPrecision, unsigned int fFlags, void *pvUser) { const int error = (int)(intptr_t)pvValue; size_t cb = 0; const char *msg = NULL; char buf[128]; NOREF(cchWidth); NOREF(cchPrecision); NOREF(fFlags); NOREF(pvUser); AssertReturn(strcmp(pszType, "sockerr") == 0, 0); /* make sure return type mismatch is caught */ #if defined(RT_OS_LINUX) && defined(_GNU_SOURCE) msg = strerror_r(error, buf, sizeof(buf)); #else { int status = strerror_r(error, buf, sizeof(buf)); msg = buf; } #endif return RTStrFormat(pfnOutput, pvArgOutput, NULL, NULL, "%s", msg); } #else /* RT_OS_WINDOWS */ /** * Formatter for %R[sockerr] - windows FormatMessage() version. */ static DECLCALLBACK(size_t) proxy_sockerr_rtstrfmt(PFNRTSTROUTPUT pfnOutput, void *pvArgOutput, const char *pszType, const void *pvValue, int cchWidth, int cchPrecision, unsigned int fFlags, void *pvUser) { const int error = (int)(intptr_t)pvValue; size_t cb = 0; NOREF(cchWidth); NOREF(cchPrecision); NOREF(fFlags); NOREF(pvUser); AssertReturn(strcmp(pszType, "sockerr") == 0, 0); /* * XXX: Windows strerror() doesn't handle posix error codes, but * since winsock uses its own, it shouldn't be much of a problem. * If you see a strange error message, it's probably from * FormatMessage() for an error from that has the * same numeric value. */ if (error < _sys_nerr) { char buf[128] = ""; int status; status = strerror_s(buf, sizeof(buf), error); if (status == 0) { if (strcmp(buf, "Unknown error") == 0) { /* windows strerror() doesn't add the numeric value */ cb += RTStrFormat(pfnOutput, pvArgOutput, NULL, NULL, "Unknown error: %d", error); } else { cb += RTStrFormat(pfnOutput, pvArgOutput, NULL, NULL, "%s", buf); } } else { cb += RTStrFormat(pfnOutput, pvArgOutput, NULL, NULL, "Unknown error: %d", error); } } else { DWORD nchars; char *msg = NULL; nchars = FormatMessageA(FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_ALLOCATE_BUFFER, NULL, error, LANG_NEUTRAL, (LPSTR)&msg, 0, NULL); if (nchars == 0 || msg == NULL) { cb += RTStrFormat(pfnOutput, pvArgOutput, NULL, NULL, "Unknown error: %d", error); } else { /* FormatMessage() "helpfully" adds newline; get rid of it */ char *crpos = strchr(msg, '\r'); if (crpos != NULL) { *crpos = '\0'; } cb += RTStrFormat(pfnOutput, pvArgOutput, NULL, NULL, "%s", msg); } if (msg != NULL) { LocalFree(msg); } } return cb; } #endif /* RT_OS_WINDOWS */ /** * Send static callback message from poll manager thread to lwip * thread, scheduling a function call in lwip thread context. * * XXX: Existing lwip api only provides non-blocking version for this. * It may fail when lwip thread is not running (mbox invalid) or if * post failed (mbox full). How to handle these? */ void proxy_lwip_post(struct tcpip_msg *msg) { struct tcpip_callback_msg *m; err_t error; LWIP_ASSERT1(msg != NULL); /* * lwip plays games with fake incomplete struct tag to enforce API */ m = (struct tcpip_callback_msg *)msg; error = tcpip_callbackmsg(m); if (error == ERR_VAL) { /* XXX: lwip thread is not running (mbox invalid) */ LWIP_ASSERT1(error != ERR_VAL); } LWIP_ASSERT1(error == ERR_OK); } /** * Create a non-blocking socket. Disable SIGPIPE for TCP sockets if * possible. On Linux it's not possible and should be disabled for * each send(2) individually. */ static SOCKET proxy_create_socket(int sdom, int stype) { SOCKET s; int stype_and_flags; int status; LWIP_UNUSED_ARG(status); /* depends on ifdefs */ stype_and_flags = stype; #if defined(SOCK_NONBLOCK) stype_and_flags |= SOCK_NONBLOCK; #endif /* * Disable SIGPIPE on disconnected socket. It might be easier to * forgo it and just use MSG_NOSIGNAL on each send*(2), since we * have to do it for Linux anyway, but Darwin does NOT have that * flag (but has SO_NOSIGPIPE socket option). */ #if !defined(SOCK_NOSIGPIPE) && !defined(SO_NOSIGPIPE) && !defined(MSG_NOSIGNAL) #if 0 /* XXX: Solaris has neither, the program should ignore SIGPIPE globally */ #error Need a way to disable SIGPIPE on connection oriented sockets! #endif #endif #if defined(SOCK_NOSIGPIPE) if (stype == SOCK_STREAM) { stype_and_flags |= SOCK_NOSIGPIPE; } #endif s = socket(sdom, stype_and_flags, 0); if (s == INVALID_SOCKET) { DPRINTF(("socket: %R[sockerr]\n", SOCKERRNO())); return INVALID_SOCKET; } #if defined(RT_OS_WINDOWS) { u_long mode = 1; status = ioctlsocket(s, FIONBIO, &mode); if (status == SOCKET_ERROR) { DPRINTF(("FIONBIO: %R[sockerr]\n", SOCKERRNO())); closesocket(s); return INVALID_SOCKET; } } #elif !defined(SOCK_NONBLOCK) { int sflags; sflags = fcntl(s, F_GETFL, 0); if (sflags < 0) { DPRINTF(("F_GETFL: %R[sockerr]\n", SOCKERRNO())); closesocket(s); return INVALID_SOCKET; } status = fcntl(s, F_SETFL, sflags | O_NONBLOCK); if (status < 0) { DPRINTF(("O_NONBLOCK: %R[sockerr]\n", SOCKERRNO())); closesocket(s); return INVALID_SOCKET; } } #endif #if !defined(SOCK_NOSIGPIPE) && defined(SO_NOSIGPIPE) if (stype == SOCK_STREAM) { int on = 1; const socklen_t onlen = sizeof(on); status = setsockopt(s, SOL_SOCKET, SO_NOSIGPIPE, &on, onlen); if (status < 0) { DPRINTF(("SO_NOSIGPIPE: %R[sockerr]\n", SOCKERRNO())); closesocket(s); return INVALID_SOCKET; } } #endif #if defined(RT_OS_WINDOWS) /* * lwIP only holds one packet of "refused data" for us. Proxy * relies on OS socket send buffer and doesn't do its own * buffering. Unfortunately on Windows send buffer is very small * (8K by default) and is not dynamically adpated by the OS it * seems. So a single large write will fill it up and that will * make lwIP drop segments, causing guest TCP into pathologic * resend patterns. As a quick and dirty fix just bump it up. */ if (stype == SOCK_STREAM) { int sndbuf; socklen_t optlen = sizeof(sndbuf); status = getsockopt(s, SOL_SOCKET, SO_SNDBUF, (char *)&sndbuf, &optlen); if (status == 0) { if (sndbuf < 64 * 1024) { sndbuf = 64 * 1024; status = setsockopt(s, SOL_SOCKET, SO_SNDBUF, (char *)&sndbuf, optlen); if (status != 0) { DPRINTF(("SO_SNDBUF: setsockopt: %R[sockerr]\n", SOCKERRNO())); } } } else { DPRINTF(("SO_SNDBUF: getsockopt: %R[sockerr]\n", SOCKERRNO())); } } #endif return s; } /** * Create a socket for outbound connection to dst_addr:dst_port. * * The socket is non-blocking and TCP sockets has SIGPIPE disabled if * possible. On Linux it's not possible and should be disabled for * each send(2) individually. */ SOCKET proxy_connected_socket(int sdom, int stype, ipX_addr_t *dst_addr, u16_t dst_port) { struct sockaddr_in6 dst_sin6; struct sockaddr_in dst_sin; struct sockaddr *pdst_sa; socklen_t dst_sa_len; void *pdst_addr; const struct sockaddr *psrc_sa; socklen_t src_sa_len; int status; int sockerr; SOCKET s; LWIP_ASSERT1(sdom == PF_INET || sdom == PF_INET6); LWIP_ASSERT1(stype == SOCK_STREAM || stype == SOCK_DGRAM); DPRINTF(("---> %s ", stype == SOCK_STREAM ? "TCP" : "UDP")); if (sdom == PF_INET6) { pdst_sa = (struct sockaddr *)&dst_sin6; pdst_addr = (void *)&dst_sin6.sin6_addr; memset(&dst_sin6, 0, sizeof(dst_sin6)); #if HAVE_SA_LEN dst_sin6.sin6_len = #endif dst_sa_len = sizeof(dst_sin6); dst_sin6.sin6_family = AF_INET6; memcpy(&dst_sin6.sin6_addr, &dst_addr->ip6, sizeof(ip6_addr_t)); dst_sin6.sin6_port = htons(dst_port); DPRINTF(("[%RTnaipv6]:%d ", &dst_sin6.sin6_addr, dst_port)); } else { /* sdom = PF_INET */ pdst_sa = (struct sockaddr *)&dst_sin; pdst_addr = (void *)&dst_sin.sin_addr; memset(&dst_sin, 0, sizeof(dst_sin)); #if HAVE_SA_LEN dst_sin.sin_len = #endif dst_sa_len = sizeof(dst_sin); dst_sin.sin_family = AF_INET; dst_sin.sin_addr.s_addr = dst_addr->ip4.addr; /* byte-order? */ dst_sin.sin_port = htons(dst_port); DPRINTF(("%RTnaipv4:%d ", dst_sin.sin_addr.s_addr, dst_port)); } s = proxy_create_socket(sdom, stype); if (s == INVALID_SOCKET) { return INVALID_SOCKET; } DPRINTF(("socket %d\n", s)); /* TODO: needs locking if dynamic modifyvm is allowed */ if (sdom == PF_INET6) { psrc_sa = (const struct sockaddr *)g_proxy_options->src6; src_sa_len = sizeof(struct sockaddr_in6); } else { psrc_sa = (const struct sockaddr *)g_proxy_options->src4; src_sa_len = sizeof(struct sockaddr_in); } if (psrc_sa != NULL) { status = bind(s, psrc_sa, src_sa_len); if (status == SOCKET_ERROR) { sockerr = SOCKERRNO(); DPRINTF(("socket %d: bind: %R[sockerr]\n", s, sockerr)); closesocket(s); SET_SOCKERRNO(sockerr); return INVALID_SOCKET; } } status = connect(s, pdst_sa, dst_sa_len); if (status == SOCKET_ERROR #if !defined(RT_OS_WINDOWS) && SOCKERRNO() != EINPROGRESS #else && SOCKERRNO() != EWOULDBLOCK #endif ) { sockerr = SOCKERRNO(); DPRINTF(("socket %d: connect: %R[sockerr]\n", s, sockerr)); closesocket(s); SET_SOCKERRNO(sockerr); return INVALID_SOCKET; } return s; } /** * Create a socket for inbound (port-forwarded) connections to * src_addr (port is part of sockaddr, so not a separate argument). * * The socket is non-blocking and TCP sockets has SIGPIPE disabled if * possible. On Linux it's not possible and should be disabled for * each send(2) individually. * * TODO?: Support v6-mapped v4 so that user can specify she wants * "udp" and get both versions? */ SOCKET proxy_bound_socket(int sdom, int stype, struct sockaddr *src_addr) { SOCKET s; int on; const socklen_t onlen = sizeof(on); int status; int sockerr; s = proxy_create_socket(sdom, stype); if (s == INVALID_SOCKET) { return INVALID_SOCKET; } DPRINTF(("socket %d\n", s)); on = 1; status = setsockopt(s, SOL_SOCKET, SO_REUSEADDR, (char *)&on, onlen); if (status < 0) { /* not good, but not fatal */ DPRINTF(("SO_REUSEADDR: %R[sockerr]\n", SOCKERRNO())); } status = bind(s, src_addr, sdom == PF_INET ? sizeof(struct sockaddr_in) : sizeof(struct sockaddr_in6)); if (status == SOCKET_ERROR) { sockerr = SOCKERRNO(); DPRINTF(("bind: %R[sockerr]\n", sockerr)); closesocket(s); SET_SOCKERRNO(sockerr); return INVALID_SOCKET; } if (stype == SOCK_STREAM) { status = listen(s, 5); if (status == SOCKET_ERROR) { sockerr = SOCKERRNO(); DPRINTF(("listen: %R[sockerr]\n", sockerr)); closesocket(s); SET_SOCKERRNO(sockerr); return INVALID_SOCKET; } } return s; } void proxy_reset_socket(SOCKET s) { struct linger linger; linger.l_onoff = 1; linger.l_linger = 0; /* On Windows we can run into issue here, perhaps SO_LINGER isn't enough, and * we should use WSA{Send,Recv}Disconnect instead. * * Links for the reference: * http://msdn.microsoft.com/en-us/library/windows/desktop/ms738547%28v=vs.85%29.aspx * http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4468997 */ setsockopt(s, SOL_SOCKET, SO_LINGER, (char *)&linger, sizeof(linger)); closesocket(s); } int proxy_sendto(SOCKET sock, struct pbuf *p, void *name, size_t namelen) { struct pbuf *q; size_t i, clen; #ifndef RT_OS_WINDOWS struct msghdr mh; ssize_t nsent; #else DWORD nsent; #endif int rc; IOVEC fixiov[8]; /* fixed size (typical case) */ const size_t fixiovsize = sizeof(fixiov)/sizeof(fixiov[0]); IOVEC *dyniov; /* dynamically sized */ IOVEC *iov; int error = 0; /* * Static iov[] is usually enough since UDP protocols use small * datagrams to avoid fragmentation, but be prepared. */ clen = pbuf_clen(p); if (clen > fixiovsize) { /* * XXX: TODO: check that clen is shorter than IOV_MAX */ dyniov = (IOVEC *)malloc(clen * sizeof(*dyniov)); if (dyniov == NULL) { error = -errno; /* sic: not a socket error */ goto out; } iov = dyniov; } else { dyniov = NULL; iov = fixiov; } for (q = p, i = 0; i < clen; q = q->next, ++i) { LWIP_ASSERT1(q != NULL); IOVEC_SET_BASE(iov[i], q->payload); IOVEC_SET_LEN(iov[i], q->len); } #ifndef RT_OS_WINDOWS memset(&mh, 0, sizeof(mh)); mh.msg_name = name; mh.msg_namelen = namelen; mh.msg_iov = iov; mh.msg_iovlen = clen; nsent = sendmsg(sock, &mh, 0); rc = (nsent >= 0) ? 0 : SOCKET_ERROR; #else rc = WSASendTo(sock, iov, (DWORD)clen, &nsent, 0, name, (int)namelen, NULL, NULL); #endif if (rc == SOCKET_ERROR) { error = SOCKERRNO(); DPRINTF(("%s: socket %d: sendmsg: %R[sockerr]\n", __func__, sock, error)); error = -error; } out: if (dyniov != NULL) { free(dyniov); } return error; } static const char *lwiperr[] = { "ERR_OK", "ERR_MEM", "ERR_BUF", "ERR_TIMEOUT", "ERR_RTE", "ERR_INPROGRESS", "ERR_VAL", "ERR_WOULDBLOCK", "ERR_USE", "ERR_ISCONN", "ERR_ABRT", "ERR_RST", "ERR_CLSD", "ERR_CONN", "ERR_ARG", "ERR_IF" }; const char * proxy_lwip_strerr(err_t error) { static char buf[32]; int e = -error; if (0 <= e && e < (int)__arraycount(lwiperr)) { return lwiperr[e]; } else { RTStrPrintf(buf, sizeof(buf), "unknown error %d", error); return buf; } }