/* $Id: EMRaw.cpp 24999 2009-11-26 13:36:37Z vboxsync $ */ /** @file * EM - Execution Monitor / Manager - software virtualization */ /* * Copyright (C) 2006-2009 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ /** @page pg_em EM - The Execution Monitor / Manager * * The Execution Monitor/Manager is responsible for running the VM, scheduling * the right kind of execution (Raw-mode, Hardware Assisted, Recompiled or * Interpreted), and keeping the CPU states in sync. The function * EMR3ExecuteVM() is the 'main-loop' of the VM, while each of the execution * modes has different inner loops (emR3RawExecute, emR3HwAccExecute, and * emR3RemExecute). * * The interpreted execution is only used to avoid switching between * raw-mode/hwaccm and the recompiler when fielding virtualization traps/faults. * The interpretation is thus implemented as part of EM. * * @see grp_em */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_EM #include #include #ifdef VBOX_WITH_VMI # include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "EMInternal.h" #include #include #include #include #include #include #include #include /******************************************************************************* * Defined Constants And Macros * *******************************************************************************/ /******************************************************************************* * Internal Functions * *******************************************************************************/ static int emR3RawForcedActions(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx); DECLINLINE(int) emR3ExecuteInstruction(PVM pVM, PVMCPU pVCpu, const char *pszPrefix, int rcGC = VINF_SUCCESS); static int emR3RawGuestTrap(PVM pVM, PVMCPU pVCpu); static int emR3PatchTrap(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx, int gcret); static int emR3SingleStepExecRem(PVM pVM, uint32_t cIterations); static int emR3RawPrivileged(PVM pVM, PVMCPU pVCpu); static int emR3ExecuteIOInstruction(PVM pVM, PVMCPU pVCpu); static int emR3RawRingSwitch(PVM pVM, PVMCPU pVCpu); #define EMHANDLERC_WITH_PATM #include "EMHandleRCTmpl.h" /** * Enables or disables a set of raw-mode execution modes. * * @returns VINF_SUCCESS on success. * @returns VINF_RESCHEDULE if a rescheduling might be required. * @returns VERR_INVALID_PARAMETER on an invalid enmMode value. * * @param pVM The VM to operate on. * @param enmMode The execution mode change. * @thread The emulation thread. */ VMMR3DECL(int) EMR3RawSetMode(PVM pVM, EMRAWMODE enmMode) { switch (enmMode) { case EMRAW_NONE: pVM->fRawR3Enabled = false; pVM->fRawR0Enabled = false; break; case EMRAW_RING3_ENABLE: pVM->fRawR3Enabled = true; break; case EMRAW_RING3_DISABLE: pVM->fRawR3Enabled = false; break; case EMRAW_RING0_ENABLE: pVM->fRawR0Enabled = true; break; case EMRAW_RING0_DISABLE: pVM->fRawR0Enabled = false; break; default: AssertMsgFailed(("Invalid enmMode=%d\n", enmMode)); return VERR_INVALID_PARAMETER; } Log(("EMR3SetRawMode: fRawR3Enabled=%RTbool fRawR0Enabled=%RTbool\n", pVM->fRawR3Enabled, pVM->fRawR0Enabled)); return pVM->aCpus[0].em.s.enmState == EMSTATE_RAW ? VINF_EM_RESCHEDULE : VINF_SUCCESS; } #ifdef VBOX_WITH_STATISTICS /** * Just a braindead function to keep track of cli addresses. * @param pVM VM handle. * @param pVMCPU VMCPU handle. * @param GCPtrInstr The EIP of the cli instruction. */ static void emR3RecordCli(PVM pVM, PVMCPU pVCpu, RTGCPTR GCPtrInstr) { PCLISTAT pRec; pRec = (PCLISTAT)RTAvlPVGet(&pVCpu->em.s.pCliStatTree, (AVLPVKEY)GCPtrInstr); if (!pRec) { /* New cli instruction; insert into the tree. */ pRec = (PCLISTAT)MMR3HeapAllocZ(pVM, MM_TAG_EM, sizeof(*pRec)); Assert(pRec); if (!pRec) return; pRec->Core.Key = (AVLPVKEY)GCPtrInstr; char szCliStatName[32]; RTStrPrintf(szCliStatName, sizeof(szCliStatName), "/EM/Cli/0x%RGv", GCPtrInstr); STAM_REG(pVM, &pRec->Counter, STAMTYPE_COUNTER, szCliStatName, STAMUNIT_OCCURENCES, "Number of times cli was executed."); bool fRc = RTAvlPVInsert(&pVCpu->em.s.pCliStatTree, &pRec->Core); Assert(fRc); NOREF(fRc); } STAM_COUNTER_INC(&pRec->Counter); STAM_COUNTER_INC(&pVCpu->em.s.StatTotalClis); } #endif /* VBOX_WITH_STATISTICS */ /** * Resumes executing hypervisor after a debug event. * * This is kind of special since our current guest state is * potentially out of sync. * * @returns VBox status code. * @param pVM The VM handle. * @param pVCpu The VMCPU handle. */ int emR3RawResumeHyper(PVM pVM, PVMCPU pVCpu) { int rc; PCPUMCTX pCtx = pVCpu->em.s.pCtx; Assert(pVCpu->em.s.enmState == EMSTATE_DEBUG_HYPER); Log(("emR3RawResumeHyper: cs:eip=%RTsel:%RGr efl=%RGr\n", pCtx->cs, pCtx->eip, pCtx->eflags)); /* * Resume execution. */ CPUMRawEnter(pVCpu, NULL); CPUMSetHyperEFlags(pVCpu, CPUMGetHyperEFlags(pVCpu) | X86_EFL_RF); rc = VMMR3ResumeHyper(pVM, pVCpu); Log(("emR3RawResumeHyper: cs:eip=%RTsel:%RGr efl=%RGr - returned from GC with rc=%Rrc\n", pCtx->cs, pCtx->eip, pCtx->eflags, rc)); rc = CPUMRawLeave(pVCpu, NULL, rc); VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_RESUME_GUEST_MASK); /* * Deal with the return code. */ rc = emR3HighPriorityPostForcedActions(pVM, pVCpu, rc); rc = emR3RawHandleRC(pVM, pVCpu, pCtx, rc); rc = emR3RawUpdateForceFlag(pVM, pVCpu, pCtx, rc); return rc; } /** * Steps rawmode. * * @returns VBox status code. * @param pVM The VM handle. * @param pVCpu The VMCPU handle. */ int emR3RawStep(PVM pVM, PVMCPU pVCpu) { Assert( pVCpu->em.s.enmState == EMSTATE_DEBUG_HYPER || pVCpu->em.s.enmState == EMSTATE_DEBUG_GUEST_RAW || pVCpu->em.s.enmState == EMSTATE_DEBUG_GUEST_REM); int rc; PCPUMCTX pCtx = pVCpu->em.s.pCtx; bool fGuest = pVCpu->em.s.enmState != EMSTATE_DEBUG_HYPER; #ifndef DEBUG_sandervl Log(("emR3RawStep: cs:eip=%RTsel:%RGr efl=%RGr\n", fGuest ? CPUMGetGuestCS(pVCpu) : CPUMGetHyperCS(pVCpu), fGuest ? CPUMGetGuestEIP(pVCpu) : CPUMGetHyperEIP(pVCpu), fGuest ? CPUMGetGuestEFlags(pVCpu) : CPUMGetHyperEFlags(pVCpu))); #endif if (fGuest) { /* * Check vital forced actions, but ignore pending interrupts and timers. */ if ( VM_FF_ISPENDING(pVM, VM_FF_HIGH_PRIORITY_PRE_RAW_MASK) || VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_HIGH_PRIORITY_PRE_RAW_MASK)) { rc = emR3RawForcedActions(pVM, pVCpu, pCtx); if (rc != VINF_SUCCESS) return rc; } /* * Set flags for single stepping. */ CPUMSetGuestEFlags(pVCpu, CPUMGetGuestEFlags(pVCpu) | X86_EFL_TF | X86_EFL_RF); } else CPUMSetHyperEFlags(pVCpu, CPUMGetHyperEFlags(pVCpu) | X86_EFL_TF | X86_EFL_RF); /* * Single step. * We do not start time or anything, if anything we should just do a few nanoseconds. */ CPUMRawEnter(pVCpu, NULL); do { if (pVCpu->em.s.enmState == EMSTATE_DEBUG_HYPER) rc = VMMR3ResumeHyper(pVM, pVCpu); else rc = VMMR3RawRunGC(pVM, pVCpu); #ifndef DEBUG_sandervl Log(("emR3RawStep: cs:eip=%RTsel:%RGr efl=%RGr - GC rc %Rrc\n", fGuest ? CPUMGetGuestCS(pVCpu) : CPUMGetHyperCS(pVCpu), fGuest ? CPUMGetGuestEIP(pVCpu) : CPUMGetHyperEIP(pVCpu), fGuest ? CPUMGetGuestEFlags(pVCpu) : CPUMGetHyperEFlags(pVCpu), rc)); #endif } while ( rc == VINF_SUCCESS || rc == VINF_EM_RAW_INTERRUPT); rc = CPUMRawLeave(pVCpu, NULL, rc); VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_RESUME_GUEST_MASK); /* * Make sure the trap flag is cleared. * (Too bad if the guest is trying to single step too.) */ if (fGuest) CPUMSetGuestEFlags(pVCpu, CPUMGetGuestEFlags(pVCpu) & ~X86_EFL_TF); else CPUMSetHyperEFlags(pVCpu, CPUMGetHyperEFlags(pVCpu) & ~X86_EFL_TF); /* * Deal with the return codes. */ rc = emR3HighPriorityPostForcedActions(pVM, pVCpu, rc); rc = emR3RawHandleRC(pVM, pVCpu, pCtx, rc); rc = emR3RawUpdateForceFlag(pVM, pVCpu, pCtx, rc); return rc; } #ifdef DEBUG int emR3SingleStepExecRaw(PVM pVM, PVMCPU pVCpu, uint32_t cIterations) { int rc = VINF_SUCCESS; EMSTATE enmOldState = pVCpu->em.s.enmState; pVCpu->em.s.enmState = EMSTATE_DEBUG_GUEST_RAW; Log(("Single step BEGIN:\n")); for (uint32_t i = 0; i < cIterations; i++) { DBGFR3PrgStep(pVCpu); DBGFR3DisasInstrCurrentLog(pVCpu, "RSS: "); rc = emR3RawStep(pVM, pVCpu); if (rc != VINF_SUCCESS) break; } Log(("Single step END: rc=%Rrc\n", rc)); CPUMSetGuestEFlags(pVCpu, CPUMGetGuestEFlags(pVCpu) & ~X86_EFL_TF); pVCpu->em.s.enmState = enmOldState; return rc; } #endif /* DEBUG */ /** * Executes one (or perhaps a few more) instruction(s). * * @returns VBox status code suitable for EM. * * @param pVM VM handle. * @param pVCpu VMCPU handle * @param rcGC GC return code * @param pszPrefix Disassembly prefix. If not NULL we'll disassemble the * instruction and prefix the log output with this text. */ #ifdef LOG_ENABLED static int emR3ExecuteInstructionWorker(PVM pVM, PVMCPU pVCpu, int rcGC, const char *pszPrefix) #else static int emR3ExecuteInstructionWorker(PVM pVM, PVMCPU pVCpu, int rcGC) #endif { PCPUMCTX pCtx = pVCpu->em.s.pCtx; int rc; /* * * The simple solution is to use the recompiler. * The better solution is to disassemble the current instruction and * try handle as many as possible without using REM. * */ #ifdef LOG_ENABLED /* * Disassemble the instruction if requested. */ if (pszPrefix) { DBGFR3InfoLog(pVM, "cpumguest", pszPrefix); DBGFR3DisasInstrCurrentLog(pVCpu, pszPrefix); } #endif /* LOG_ENABLED */ /* * PATM is making life more interesting. * We cannot hand anything to REM which has an EIP inside patch code. So, we'll * tell PATM there is a trap in this code and have it take the appropriate actions * to allow us execute the code in REM. */ if (PATMIsPatchGCAddr(pVM, pCtx->eip)) { Log(("emR3ExecuteInstruction: In patch block. eip=%RRv\n", (RTRCPTR)pCtx->eip)); RTGCPTR pNewEip; rc = PATMR3HandleTrap(pVM, pCtx, pCtx->eip, &pNewEip); switch (rc) { /* * It's not very useful to emulate a single instruction and then go back to raw * mode; just execute the whole block until IF is set again. */ case VINF_SUCCESS: Log(("emR3ExecuteInstruction: Executing instruction starting at new address %RGv IF=%d VMIF=%x\n", pNewEip, pCtx->eflags.Bits.u1IF, pVCpu->em.s.pPatmGCState->uVMFlags)); pCtx->eip = pNewEip; Assert(pCtx->eip); if (pCtx->eflags.Bits.u1IF) { /* * The last instruction in the patch block needs to be executed!! (sti/sysexit for example) */ Log(("PATCH: IF=1 -> emulate last instruction as it can't be interrupted!!\n")); return emR3ExecuteInstruction(pVM, pVCpu, "PATCHIR"); } else if (rcGC == VINF_PATM_PENDING_IRQ_AFTER_IRET) { /* special case: iret, that sets IF, detected a pending irq/event */ return emR3ExecuteInstruction(pVM, pVCpu, "PATCHIRET"); } return VINF_EM_RESCHEDULE_REM; /* * One instruction. */ case VINF_PATCH_EMULATE_INSTR: Log(("emR3ExecuteInstruction: Emulate patched instruction at %RGv IF=%d VMIF=%x\n", pNewEip, pCtx->eflags.Bits.u1IF, pVCpu->em.s.pPatmGCState->uVMFlags)); pCtx->eip = pNewEip; return emR3ExecuteInstruction(pVM, pVCpu, "PATCHIR"); /* * The patch was disabled, hand it to the REM. */ case VERR_PATCH_DISABLED: Log(("emR3ExecuteInstruction: Disabled patch -> new eip %RGv IF=%d VMIF=%x\n", pNewEip, pCtx->eflags.Bits.u1IF, pVCpu->em.s.pPatmGCState->uVMFlags)); pCtx->eip = pNewEip; if (pCtx->eflags.Bits.u1IF) { /* * The last instruction in the patch block needs to be executed!! (sti/sysexit for example) */ Log(("PATCH: IF=1 -> emulate last instruction as it can't be interrupted!!\n")); return emR3ExecuteInstruction(pVM, pVCpu, "PATCHIR"); } return VINF_EM_RESCHEDULE_REM; /* Force continued patch exection; usually due to write monitored stack. */ case VINF_PATCH_CONTINUE: return VINF_SUCCESS; default: AssertReleaseMsgFailed(("Unknown return code %Rrc from PATMR3HandleTrap\n", rc)); return VERR_IPE_UNEXPECTED_STATUS; } } #if 0 /* Try our own instruction emulator before falling back to the recompiler. */ DISCPUSTATE Cpu; rc = CPUMR3DisasmInstrCPU(pVM, pVCpu, pCtx, pCtx->rip, &Cpu, "GEN EMU"); if (RT_SUCCESS(rc)) { uint32_t size; switch (Cpu.pCurInstr->opcode) { /* @todo we can do more now */ case OP_MOV: case OP_AND: case OP_OR: case OP_XOR: case OP_POP: case OP_INC: case OP_DEC: case OP_XCHG: STAM_PROFILE_START(&pVCpu->em.s.StatMiscEmu, a); rc = EMInterpretInstructionCPU(pVM, &Cpu, CPUMCTX2CORE(pCtx), 0, &size); if (RT_SUCCESS(rc)) { pCtx->rip += Cpu.opsize; STAM_PROFILE_STOP(&pVCpu->em.s.StatMiscEmu, a); return rc; } if (rc != VERR_EM_INTERPRETER) AssertMsgFailedReturn(("rc=%Rrc\n", rc), rc); STAM_PROFILE_STOP(&pVCpu->em.s.StatMiscEmu, a); break; } } #endif /* 0 */ STAM_PROFILE_START(&pVCpu->em.s.StatREMEmu, a); Log(("EMINS: %04x:%RGv RSP=%RGv\n", pCtx->cs, (RTGCPTR)pCtx->rip, (RTGCPTR)pCtx->rsp)); EMRemLock(pVM); /* Flush the recompiler TLB if the VCPU has changed. */ if (pVM->em.s.idLastRemCpu != pVCpu->idCpu) CPUMSetChangedFlags(pVCpu, CPUM_CHANGED_ALL); pVM->em.s.idLastRemCpu = pVCpu->idCpu; rc = REMR3EmulateInstruction(pVM, pVCpu); EMRemUnlock(pVM); STAM_PROFILE_STOP(&pVCpu->em.s.StatREMEmu, a); return rc; } /** * Executes one (or perhaps a few more) instruction(s). * This is just a wrapper for discarding pszPrefix in non-logging builds. * * @returns VBox status code suitable for EM. * @param pVM VM handle. * @param pVCpu VMCPU handle. * @param pszPrefix Disassembly prefix. If not NULL we'll disassemble the * instruction and prefix the log output with this text. * @param rcGC GC return code */ DECLINLINE(int) emR3ExecuteInstruction(PVM pVM, PVMCPU pVCpu, const char *pszPrefix, int rcGC) { #ifdef LOG_ENABLED return emR3ExecuteInstructionWorker(pVM, pVCpu, rcGC, pszPrefix); #else return emR3ExecuteInstructionWorker(pVM, pVCpu, rcGC); #endif } /** * Executes one (or perhaps a few more) IO instruction(s). * * @returns VBox status code suitable for EM. * @param pVM VM handle. * @param pVCpu VMCPU handle. */ static int emR3ExecuteIOInstruction(PVM pVM, PVMCPU pVCpu) { PCPUMCTX pCtx = pVCpu->em.s.pCtx; STAM_PROFILE_START(&pVCpu->em.s.StatIOEmu, a); /** @todo probably we should fall back to the recompiler; otherwise we'll go back and forth between HC & GC * as io instructions tend to come in packages of more than one */ DISCPUSTATE Cpu; int rc = CPUMR3DisasmInstrCPU(pVM, pVCpu, pCtx, pCtx->rip, &Cpu, "IO EMU"); if (RT_SUCCESS(rc)) { VBOXSTRICTRC rcStrict = VINF_EM_RAW_EMULATE_INSTR; if (!(Cpu.prefix & (PREFIX_REP | PREFIX_REPNE))) { switch (Cpu.pCurInstr->opcode) { case OP_IN: { STAM_COUNTER_INC(&pVCpu->em.s.CTX_SUFF(pStats)->StatIn); rcStrict = IOMInterpretIN(pVM, CPUMCTX2CORE(pCtx), &Cpu); break; } case OP_OUT: { STAM_COUNTER_INC(&pVCpu->em.s.CTX_SUFF(pStats)->StatOut); rcStrict = IOMInterpretOUT(pVM, CPUMCTX2CORE(pCtx), &Cpu); break; } } } else if (Cpu.prefix & PREFIX_REP) { switch (Cpu.pCurInstr->opcode) { case OP_INSB: case OP_INSWD: { STAM_COUNTER_INC(&pVCpu->em.s.CTX_SUFF(pStats)->StatIn); rcStrict = IOMInterpretINS(pVM, CPUMCTX2CORE(pCtx), &Cpu); break; } case OP_OUTSB: case OP_OUTSWD: { STAM_COUNTER_INC(&pVCpu->em.s.CTX_SUFF(pStats)->StatOut); rcStrict = IOMInterpretOUTS(pVM, CPUMCTX2CORE(pCtx), &Cpu); break; } } } /* * Handled the I/O return codes. * (The unhandled cases end up with rcStrict == VINF_EM_RAW_EMULATE_INSTR.) */ if (IOM_SUCCESS(rcStrict)) { pCtx->rip += Cpu.opsize; STAM_PROFILE_STOP(&pVCpu->em.s.StatIOEmu, a); return VBOXSTRICTRC_TODO(rcStrict); } if (rcStrict == VINF_EM_RAW_GUEST_TRAP) { STAM_PROFILE_STOP(&pVCpu->em.s.StatIOEmu, a); rcStrict = emR3RawGuestTrap(pVM, pVCpu); return VBOXSTRICTRC_TODO(rcStrict); } AssertMsg(rcStrict != VINF_TRPM_XCPT_DISPATCHED, ("Handle VINF_TRPM_XCPT_DISPATCHED\n")); if (RT_FAILURE(rcStrict)) { STAM_PROFILE_STOP(&pVCpu->em.s.StatIOEmu, a); return VBOXSTRICTRC_TODO(rcStrict); } AssertMsg(rcStrict == VINF_EM_RAW_EMULATE_INSTR || rcStrict == VINF_EM_RESCHEDULE_REM, ("rcStrict=%Rrc\n", VBOXSTRICTRC_VAL(rcStrict))); } STAM_PROFILE_STOP(&pVCpu->em.s.StatIOEmu, a); return emR3ExecuteInstruction(pVM, pVCpu, "IO: "); } /** * Handle a guest context trap. * * @returns VBox status code suitable for EM. * @param pVM VM handle. * @param pVCpu VMCPU handle. */ static int emR3RawGuestTrap(PVM pVM, PVMCPU pVCpu) { PCPUMCTX pCtx = pVCpu->em.s.pCtx; /* * Get the trap info. */ uint8_t u8TrapNo; TRPMEVENT enmType; RTGCUINT uErrorCode; RTGCUINTPTR uCR2; int rc = TRPMQueryTrapAll(pVCpu, &u8TrapNo, &enmType, &uErrorCode, &uCR2); if (RT_FAILURE(rc)) { AssertReleaseMsgFailed(("No trap! (rc=%Rrc)\n", rc)); return rc; } #if 1 /* Experimental: Review, disable if it causes trouble. */ /* * Handle traps in patch code first. * * We catch a few of these cases in RC before returning to R3 (#PF, #GP, #BP) * but several traps isn't handled specially by TRPM in RC and we end up here * instead. One example is #DE. */ uint32_t uCpl = CPUMGetGuestCPL(pVCpu, CPUMCTX2CORE(pCtx)); if ( uCpl == 0 && PATMIsPatchGCAddr(pVM, (RTGCPTR)pCtx->eip)) { LogFlow(("emR3RawGuestTrap: trap %#x in patch code; eip=%08x\n", u8TrapNo, pCtx->eip)); return emR3PatchTrap(pVM, pVCpu, pCtx, rc); } #endif /* * If the guest gate is marked unpatched, then we will check again if we can patch it. * (This assumes that we've already tried and failed to dispatch the trap in * RC for the gates that already has been patched. Which is true for most high * volume traps, because these are handled specially, but not for odd ones like #DE.) */ if (TRPMR3GetGuestTrapHandler(pVM, u8TrapNo) == TRPM_INVALID_HANDLER) { CSAMR3CheckGates(pVM, u8TrapNo, 1); Log(("emR3RawHandleRC: recheck gate %x -> valid=%d\n", u8TrapNo, TRPMR3GetGuestTrapHandler(pVM, u8TrapNo) != TRPM_INVALID_HANDLER)); /* If it was successful, then we could go back to raw mode. */ if (TRPMR3GetGuestTrapHandler(pVM, u8TrapNo) != TRPM_INVALID_HANDLER) { /* Must check pending forced actions as our IDT or GDT might be out of sync. */ rc = EMR3CheckRawForcedActions(pVM, pVCpu); AssertRCReturn(rc, rc); TRPMERRORCODE enmError = uErrorCode != ~0U ? TRPM_TRAP_HAS_ERRORCODE : TRPM_TRAP_NO_ERRORCODE; rc = TRPMForwardTrap(pVCpu, CPUMCTX2CORE(pCtx), u8TrapNo, uErrorCode, enmError, TRPM_TRAP, -1); if (rc == VINF_SUCCESS /* Don't use RT_SUCCESS */) { TRPMResetTrap(pVCpu); return VINF_EM_RESCHEDULE_RAW; } AssertMsg(rc == VINF_EM_RAW_GUEST_TRAP, ("%Rrc\n", rc)); } } /* * Scan kernel code that traps; we might not get another chance. */ /** @todo move this up before the dispatching? */ if ( (pCtx->ss & X86_SEL_RPL) <= 1 && !pCtx->eflags.Bits.u1VM) { Assert(!PATMIsPatchGCAddr(pVM, pCtx->eip)); CSAMR3CheckCodeEx(pVM, CPUMCTX2CORE(pCtx), pCtx->eip); } /* * Trap specific handling. */ if (u8TrapNo == 6) /* (#UD) Invalid opcode. */ { /* * If MONITOR & MWAIT are supported, then interpret them here. */ DISCPUSTATE cpu; rc = CPUMR3DisasmInstrCPU(pVM, pVCpu, pCtx, pCtx->rip, &cpu, "Guest Trap (#UD): "); if ( RT_SUCCESS(rc) && (cpu.pCurInstr->opcode == OP_MONITOR || cpu.pCurInstr->opcode == OP_MWAIT)) { uint32_t u32Dummy, u32Features, u32ExtFeatures; CPUMGetGuestCpuId(pVCpu, 1, &u32Dummy, &u32Dummy, &u32ExtFeatures, &u32Features); if (u32ExtFeatures & X86_CPUID_FEATURE_ECX_MONITOR) { rc = TRPMResetTrap(pVCpu); AssertRC(rc); uint32_t opsize; rc = EMInterpretInstructionCPU(pVM, pVCpu, &cpu, CPUMCTX2CORE(pCtx), 0, &opsize); if (RT_SUCCESS(rc)) { pCtx->rip += cpu.opsize; return rc; } return emR3ExecuteInstruction(pVM, pVCpu, "Monitor: "); } } } else if (u8TrapNo == 13) /* (#GP) Privileged exception */ { /* * Handle I/O bitmap? */ /** @todo We're not supposed to be here with a false guest trap concerning * I/O access. We can easily handle those in RC. */ DISCPUSTATE cpu; rc = CPUMR3DisasmInstrCPU(pVM, pVCpu, pCtx, pCtx->rip, &cpu, "Guest Trap: "); if ( RT_SUCCESS(rc) && (cpu.pCurInstr->optype & OPTYPE_PORTIO)) { /* * We should really check the TSS for the IO bitmap, but it's not like this * lazy approach really makes things worse. */ rc = TRPMResetTrap(pVCpu); AssertRC(rc); return emR3ExecuteInstruction(pVM, pVCpu, "IO Guest Trap: "); } } #ifdef LOG_ENABLED DBGFR3InfoLog(pVM, "cpumguest", "Guest trap"); DBGFR3DisasInstrCurrentLog(pVCpu, "Guest trap"); /* Get guest page information. */ uint64_t fFlags = 0; RTGCPHYS GCPhys = 0; int rc2 = PGMGstGetPage(pVCpu, uCR2, &fFlags, &GCPhys); Log(("emR3RawGuestTrap: cs:eip=%04x:%08x: trap=%02x err=%08x cr2=%08x cr0=%08x%s: Phys=%RGp fFlags=%08llx %s %s %s%s rc2=%d\n", pCtx->cs, pCtx->eip, u8TrapNo, uErrorCode, uCR2, (uint32_t)pCtx->cr0, (enmType == TRPM_SOFTWARE_INT) ? " software" : "", GCPhys, fFlags, fFlags & X86_PTE_P ? "P " : "NP", fFlags & X86_PTE_US ? "U" : "S", fFlags & X86_PTE_RW ? "RW" : "R0", fFlags & X86_PTE_G ? " G" : "", rc2)); #endif /* * #PG has CR2. * (Because of stuff like above we must set CR2 in a delayed fashion.) */ if (u8TrapNo == 14 /* #PG */) pCtx->cr2 = uCR2; return VINF_EM_RESCHEDULE_REM; } /** * Handle a ring switch trap. * Need to do statistics and to install patches. The result is going to REM. * * @returns VBox status code suitable for EM. * @param pVM VM handle. * @param pVCpu VMCPU handle. */ static int emR3RawRingSwitch(PVM pVM, PVMCPU pVCpu) { int rc; DISCPUSTATE Cpu; PCPUMCTX pCtx = pVCpu->em.s.pCtx; /* * sysenter, syscall & callgate */ rc = CPUMR3DisasmInstrCPU(pVM, pVCpu, pCtx, pCtx->rip, &Cpu, "RSWITCH: "); if (RT_SUCCESS(rc)) { if (Cpu.pCurInstr->opcode == OP_SYSENTER) { if (pCtx->SysEnter.cs != 0) { rc = PATMR3InstallPatch(pVM, SELMToFlat(pVM, DIS_SELREG_CS, CPUMCTX2CORE(pCtx), pCtx->eip), (SELMGetCpuModeFromSelector(pVM, pCtx->eflags, pCtx->cs, &pCtx->csHid) == CPUMODE_32BIT) ? PATMFL_CODE32 : 0); if (RT_SUCCESS(rc)) { DBGFR3DisasInstrCurrentLog(pVCpu, "Patched sysenter instruction"); return VINF_EM_RESCHEDULE_RAW; } } } #ifdef VBOX_WITH_STATISTICS switch (Cpu.pCurInstr->opcode) { case OP_SYSENTER: STAM_COUNTER_INC(&pVCpu->em.s.CTX_SUFF(pStats)->StatSysEnter); break; case OP_SYSEXIT: STAM_COUNTER_INC(&pVCpu->em.s.CTX_SUFF(pStats)->StatSysExit); break; case OP_SYSCALL: STAM_COUNTER_INC(&pVCpu->em.s.CTX_SUFF(pStats)->StatSysCall); break; case OP_SYSRET: STAM_COUNTER_INC(&pVCpu->em.s.CTX_SUFF(pStats)->StatSysRet); break; } #endif } else AssertRC(rc); /* go to the REM to emulate a single instruction */ return emR3ExecuteInstruction(pVM, pVCpu, "RSWITCH: "); } /** * Handle a trap (\#PF or \#GP) in patch code * * @returns VBox status code suitable for EM. * @param pVM VM handle. * @param pVCpu VMCPU handle. * @param pCtx CPU context * @param gcret GC return code */ static int emR3PatchTrap(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx, int gcret) { uint8_t u8TrapNo; int rc; TRPMEVENT enmType; RTGCUINT uErrorCode; RTGCUINTPTR uCR2; Assert(PATMIsPatchGCAddr(pVM, pCtx->eip)); if (gcret == VINF_PATM_PATCH_INT3) { u8TrapNo = 3; uCR2 = 0; uErrorCode = 0; } else if (gcret == VINF_PATM_PATCH_TRAP_GP) { /* No active trap in this case. Kind of ugly. */ u8TrapNo = X86_XCPT_GP; uCR2 = 0; uErrorCode = 0; } else { rc = TRPMQueryTrapAll(pVCpu, &u8TrapNo, &enmType, &uErrorCode, &uCR2); if (RT_FAILURE(rc)) { AssertReleaseMsgFailed(("emR3PatchTrap: no trap! (rc=%Rrc) gcret=%Rrc\n", rc, gcret)); return rc; } /* Reset the trap as we'll execute the original instruction again. */ TRPMResetTrap(pVCpu); } /* * Deal with traps inside patch code. * (This code won't run outside GC.) */ if (u8TrapNo != 1) { #ifdef LOG_ENABLED DBGFR3InfoLog(pVM, "cpumguest", "Trap in patch code"); DBGFR3DisasInstrCurrentLog(pVCpu, "Patch code"); DISCPUSTATE Cpu; rc = CPUMR3DisasmInstrCPU(pVM, pVCpu, pCtx, pCtx->eip, &Cpu, "Patch code: "); if ( RT_SUCCESS(rc) && Cpu.pCurInstr->opcode == OP_IRET) { uint32_t eip, selCS, uEFlags; /* Iret crashes are bad as we have already changed the flags on the stack */ rc = PGMPhysSimpleReadGCPtr(pVCpu, &eip, pCtx->esp, 4); rc |= PGMPhysSimpleReadGCPtr(pVCpu, &selCS, pCtx->esp+4, 4); rc |= PGMPhysSimpleReadGCPtr(pVCpu, &uEFlags, pCtx->esp+8, 4); if (rc == VINF_SUCCESS) { if ( (uEFlags & X86_EFL_VM) || (selCS & X86_SEL_RPL) == 3) { uint32_t selSS, esp; rc |= PGMPhysSimpleReadGCPtr(pVCpu, &esp, pCtx->esp + 12, 4); rc |= PGMPhysSimpleReadGCPtr(pVCpu, &selSS, pCtx->esp + 16, 4); if (uEFlags & X86_EFL_VM) { uint32_t selDS, selES, selFS, selGS; rc = PGMPhysSimpleReadGCPtr(pVCpu, &selES, pCtx->esp + 20, 4); rc |= PGMPhysSimpleReadGCPtr(pVCpu, &selDS, pCtx->esp + 24, 4); rc |= PGMPhysSimpleReadGCPtr(pVCpu, &selFS, pCtx->esp + 28, 4); rc |= PGMPhysSimpleReadGCPtr(pVCpu, &selGS, pCtx->esp + 32, 4); if (rc == VINF_SUCCESS) { Log(("Patch code: IRET->VM stack frame: return address %04X:%08RX32 eflags=%08x ss:esp=%04X:%08RX32\n", selCS, eip, uEFlags, selSS, esp)); Log(("Patch code: IRET->VM stack frame: DS=%04X ES=%04X FS=%04X GS=%04X\n", selDS, selES, selFS, selGS)); } } else Log(("Patch code: IRET stack frame: return address %04X:%08RX32 eflags=%08x ss:esp=%04X:%08RX32\n", selCS, eip, uEFlags, selSS, esp)); } else Log(("Patch code: IRET stack frame: return address %04X:%08RX32 eflags=%08x\n", selCS, eip, uEFlags)); } } #endif /* LOG_ENABLED */ Log(("emR3PatchTrap: in patch: eip=%08x: trap=%02x err=%08x cr2=%08x cr0=%08x\n", pCtx->eip, u8TrapNo, uErrorCode, uCR2, (uint32_t)pCtx->cr0)); RTGCPTR pNewEip; rc = PATMR3HandleTrap(pVM, pCtx, pCtx->eip, &pNewEip); switch (rc) { /* * Execute the faulting instruction. */ case VINF_SUCCESS: { /** @todo execute a whole block */ Log(("emR3PatchTrap: Executing faulting instruction at new address %RGv\n", pNewEip)); if (!(pVCpu->em.s.pPatmGCState->uVMFlags & X86_EFL_IF)) Log(("emR3PatchTrap: Virtual IF flag disabled!!\n")); pCtx->eip = pNewEip; AssertRelease(pCtx->eip); if (pCtx->eflags.Bits.u1IF) { /* Windows XP lets irets fault intentionally and then takes action based on the opcode; an * int3 patch overwrites it and leads to blue screens. Remove the patch in this case. */ if ( u8TrapNo == X86_XCPT_GP && PATMIsInt3Patch(pVM, pCtx->eip, NULL, NULL)) { /** @todo move to PATMR3HandleTrap */ Log(("Possible Windows XP iret fault at %08RX32\n", pCtx->eip)); PATMR3RemovePatch(pVM, pCtx->eip); } /** @todo Knoppix 5 regression when returning VINF_SUCCESS here and going back to raw mode. */ /* Note: possibly because a reschedule is required (e.g. iret to V86 code) */ return emR3ExecuteInstruction(pVM, pVCpu, "PATCHIR"); /* Interrupts are enabled; just go back to the original instruction. return VINF_SUCCESS; */ } return VINF_EM_RESCHEDULE_REM; } /* * One instruction. */ case VINF_PATCH_EMULATE_INSTR: Log(("emR3PatchTrap: Emulate patched instruction at %RGv IF=%d VMIF=%x\n", pNewEip, pCtx->eflags.Bits.u1IF, pVCpu->em.s.pPatmGCState->uVMFlags)); pCtx->eip = pNewEip; AssertRelease(pCtx->eip); return emR3ExecuteInstruction(pVM, pVCpu, "PATCHEMUL: "); /* * The patch was disabled, hand it to the REM. */ case VERR_PATCH_DISABLED: if (!(pVCpu->em.s.pPatmGCState->uVMFlags & X86_EFL_IF)) Log(("emR3PatchTrap: Virtual IF flag disabled!!\n")); pCtx->eip = pNewEip; AssertRelease(pCtx->eip); if (pCtx->eflags.Bits.u1IF) { /* * The last instruction in the patch block needs to be executed!! (sti/sysexit for example) */ Log(("PATCH: IF=1 -> emulate last instruction as it can't be interrupted!!\n")); return emR3ExecuteInstruction(pVM, pVCpu, "PATCHIR"); } return VINF_EM_RESCHEDULE_REM; /* Force continued patch exection; usually due to write monitored stack. */ case VINF_PATCH_CONTINUE: return VINF_SUCCESS; /* * Anything else is *fatal*. */ default: AssertReleaseMsgFailed(("Unknown return code %Rrc from PATMR3HandleTrap!\n", rc)); return VERR_IPE_UNEXPECTED_STATUS; } } return VINF_SUCCESS; } /** * Handle a privileged instruction. * * @returns VBox status code suitable for EM. * @param pVM VM handle. * @param pVCpu VMCPU handle; */ static int emR3RawPrivileged(PVM pVM, PVMCPU pVCpu) { PCPUMCTX pCtx = pVCpu->em.s.pCtx; Assert(!pCtx->eflags.Bits.u1VM); if (PATMIsEnabled(pVM)) { /* * Check if in patch code. */ if (PATMR3IsInsidePatchJump(pVM, pCtx->eip, NULL)) { #ifdef LOG_ENABLED DBGFR3InfoLog(pVM, "cpumguest", "PRIV"); #endif AssertMsgFailed(("FATAL ERROR: executing random instruction inside generated patch jump %08X\n", pCtx->eip)); return VERR_EM_RAW_PATCH_CONFLICT; } if ( (pCtx->ss & X86_SEL_RPL) == 0 && !pCtx->eflags.Bits.u1VM && !PATMIsPatchGCAddr(pVM, pCtx->eip)) { int rc = PATMR3InstallPatch(pVM, SELMToFlat(pVM, DIS_SELREG_CS, CPUMCTX2CORE(pCtx), pCtx->eip), (SELMGetCpuModeFromSelector(pVM, pCtx->eflags, pCtx->cs, &pCtx->csHid) == CPUMODE_32BIT) ? PATMFL_CODE32 : 0); if (RT_SUCCESS(rc)) { #ifdef LOG_ENABLED DBGFR3InfoLog(pVM, "cpumguest", "PRIV"); #endif DBGFR3DisasInstrCurrentLog(pVCpu, "Patched privileged instruction"); return VINF_SUCCESS; } } } #ifdef LOG_ENABLED if (!PATMIsPatchGCAddr(pVM, pCtx->eip)) { DBGFR3InfoLog(pVM, "cpumguest", "PRIV"); DBGFR3DisasInstrCurrentLog(pVCpu, "Privileged instr: "); } #endif /* * Instruction statistics and logging. */ DISCPUSTATE Cpu; int rc; rc = CPUMR3DisasmInstrCPU(pVM, pVCpu, pCtx, pCtx->rip, &Cpu, "PRIV: "); if (RT_SUCCESS(rc)) { #ifdef VBOX_WITH_STATISTICS PEMSTATS pStats = pVCpu->em.s.CTX_SUFF(pStats); switch (Cpu.pCurInstr->opcode) { case OP_INVLPG: STAM_COUNTER_INC(&pStats->StatInvlpg); break; case OP_IRET: STAM_COUNTER_INC(&pStats->StatIret); break; case OP_CLI: STAM_COUNTER_INC(&pStats->StatCli); emR3RecordCli(pVM, pVCpu, pCtx->rip); break; case OP_STI: STAM_COUNTER_INC(&pStats->StatSti); break; case OP_INSB: case OP_INSWD: case OP_IN: case OP_OUTSB: case OP_OUTSWD: case OP_OUT: AssertMsgFailed(("Unexpected privileged exception due to port IO\n")); break; case OP_MOV_CR: if (Cpu.param1.flags & USE_REG_GEN32) { //read Assert(Cpu.param2.flags & USE_REG_CR); Assert(Cpu.param2.base.reg_ctrl <= USE_REG_CR4); STAM_COUNTER_INC(&pStats->StatMovReadCR[Cpu.param2.base.reg_ctrl]); } else { //write Assert(Cpu.param1.flags & USE_REG_CR); Assert(Cpu.param1.base.reg_ctrl <= USE_REG_CR4); STAM_COUNTER_INC(&pStats->StatMovWriteCR[Cpu.param1.base.reg_ctrl]); } break; case OP_MOV_DR: STAM_COUNTER_INC(&pStats->StatMovDRx); break; case OP_LLDT: STAM_COUNTER_INC(&pStats->StatMovLldt); break; case OP_LIDT: STAM_COUNTER_INC(&pStats->StatMovLidt); break; case OP_LGDT: STAM_COUNTER_INC(&pStats->StatMovLgdt); break; case OP_SYSENTER: STAM_COUNTER_INC(&pStats->StatSysEnter); break; case OP_SYSEXIT: STAM_COUNTER_INC(&pStats->StatSysExit); break; case OP_SYSCALL: STAM_COUNTER_INC(&pStats->StatSysCall); break; case OP_SYSRET: STAM_COUNTER_INC(&pStats->StatSysRet); break; case OP_HLT: STAM_COUNTER_INC(&pStats->StatHlt); break; default: STAM_COUNTER_INC(&pStats->StatMisc); Log4(("emR3RawPrivileged: opcode=%d\n", Cpu.pCurInstr->opcode)); break; } #endif /* VBOX_WITH_STATISTICS */ if ( (pCtx->ss & X86_SEL_RPL) == 0 && !pCtx->eflags.Bits.u1VM && SELMGetCpuModeFromSelector(pVM, pCtx->eflags, pCtx->cs, &pCtx->csHid) == CPUMODE_32BIT) { uint32_t size; STAM_PROFILE_START(&pVCpu->em.s.StatPrivEmu, a); switch (Cpu.pCurInstr->opcode) { case OP_CLI: pCtx->eflags.u32 &= ~X86_EFL_IF; Assert(Cpu.opsize == 1); pCtx->rip += Cpu.opsize; STAM_PROFILE_STOP(&pVCpu->em.s.StatPrivEmu, a); return VINF_EM_RESCHEDULE_REM; /* must go to the recompiler now! */ case OP_STI: pCtx->eflags.u32 |= X86_EFL_IF; EMSetInhibitInterruptsPC(pVCpu, pCtx->rip + Cpu.opsize); Assert(Cpu.opsize == 1); pCtx->rip += Cpu.opsize; STAM_PROFILE_STOP(&pVCpu->em.s.StatPrivEmu, a); return VINF_SUCCESS; case OP_HLT: if (PATMIsPatchGCAddr(pVM, (RTGCPTR)pCtx->eip)) { PATMTRANSSTATE enmState; RTGCPTR pOrgInstrGC = PATMR3PatchToGCPtr(pVM, pCtx->eip, &enmState); if (enmState == PATMTRANS_OVERWRITTEN) { rc = PATMR3DetectConflict(pVM, pOrgInstrGC, pOrgInstrGC); Assert(rc == VERR_PATCH_DISABLED); /* Conflict detected, patch disabled */ Log(("emR3RawPrivileged: detected conflict -> disabled patch at %08RX32\n", pCtx->eip)); enmState = PATMTRANS_SAFE; } /* The translation had better be successful. Otherwise we can't recover. */ AssertReleaseMsg(pOrgInstrGC && enmState != PATMTRANS_OVERWRITTEN, ("Unable to translate instruction address at %08RX32\n", pCtx->eip)); if (enmState != PATMTRANS_OVERWRITTEN) pCtx->eip = pOrgInstrGC; } /* no break; we could just return VINF_EM_HALT here */ case OP_MOV_CR: case OP_MOV_DR: #ifdef LOG_ENABLED if (PATMIsPatchGCAddr(pVM, pCtx->eip)) { DBGFR3InfoLog(pVM, "cpumguest", "PRIV"); DBGFR3DisasInstrCurrentLog(pVCpu, "Privileged instr: "); } #endif rc = EMInterpretInstructionCPU(pVM, pVCpu, &Cpu, CPUMCTX2CORE(pCtx), 0, &size); if (RT_SUCCESS(rc)) { pCtx->rip += Cpu.opsize; STAM_PROFILE_STOP(&pVCpu->em.s.StatPrivEmu, a); if ( Cpu.pCurInstr->opcode == OP_MOV_CR && Cpu.param1.flags == USE_REG_CR /* write */ ) { /* Deal with CR0 updates inside patch code that force * us to go to the recompiler. */ if ( PATMIsPatchGCAddr(pVM, pCtx->rip) && (pCtx->cr0 & (X86_CR0_WP|X86_CR0_PG|X86_CR0_PE)) != (X86_CR0_WP|X86_CR0_PG|X86_CR0_PE)) { PATMTRANSSTATE enmState; RTGCPTR pOrgInstrGC = PATMR3PatchToGCPtr(pVM, pCtx->rip, &enmState); Log(("Force recompiler switch due to cr0 (%RGp) update rip=%RGv -> %RGv (enmState=%d)\n", pCtx->cr0, pCtx->rip, pOrgInstrGC, enmState)); if (enmState == PATMTRANS_OVERWRITTEN) { rc = PATMR3DetectConflict(pVM, pOrgInstrGC, pOrgInstrGC); Assert(rc == VERR_PATCH_DISABLED); /* Conflict detected, patch disabled */ Log(("emR3RawPrivileged: detected conflict -> disabled patch at %RGv\n", (RTGCPTR)pCtx->rip)); enmState = PATMTRANS_SAFE; } /* The translation had better be successful. Otherwise we can't recover. */ AssertReleaseMsg(pOrgInstrGC && enmState != PATMTRANS_OVERWRITTEN, ("Unable to translate instruction address at %RGv\n", (RTGCPTR)pCtx->rip)); if (enmState != PATMTRANS_OVERWRITTEN) pCtx->rip = pOrgInstrGC; } /* Reschedule is necessary as the execution/paging mode might have changed. */ return VINF_EM_RESCHEDULE; } return rc; /* can return VINF_EM_HALT as well. */ } AssertMsgReturn(rc == VERR_EM_INTERPRETER, ("%Rrc\n", rc), rc); break; /* fall back to the recompiler */ } STAM_PROFILE_STOP(&pVCpu->em.s.StatPrivEmu, a); } } if (PATMIsPatchGCAddr(pVM, pCtx->eip)) return emR3PatchTrap(pVM, pVCpu, pCtx, VINF_PATM_PATCH_TRAP_GP); return emR3ExecuteInstruction(pVM, pVCpu, "PRIV"); } /** * Update the forced rawmode execution modifier. * * This function is called when we're returning from the raw-mode loop(s). If we're * in patch code, it will set a flag forcing execution to be resumed in raw-mode, * if not in patch code, the flag will be cleared. * * We should never interrupt patch code while it's being executed. Cli patches can * contain big code blocks, but they are always executed with IF=0. Other patches * replace single instructions and should be atomic. * * @returns Updated rc. * * @param pVM The VM handle. * @param pVCpu The VMCPU handle. * @param pCtx The guest CPU context. * @param rc The result code. */ int emR3RawUpdateForceFlag(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx, int rc) { if (PATMIsPatchGCAddr(pVM, pCtx->eip)) /** @todo check cs selector base/type */ { /* ignore reschedule attempts. */ switch (rc) { case VINF_EM_RESCHEDULE: case VINF_EM_RESCHEDULE_REM: LogFlow(("emR3RawUpdateForceFlag: patch address -> force raw reschedule\n")); rc = VINF_SUCCESS; break; } pVCpu->em.s.fForceRAW = true; } else pVCpu->em.s.fForceRAW = false; return rc; } /** * Check for pending raw actions * * @returns VBox status code. May return VINF_EM_NO_MEMORY but none of the other * EM statuses. * @param pVM The VM to operate on. * @param pVCpu The VMCPU handle. */ VMMR3DECL(int) EMR3CheckRawForcedActions(PVM pVM, PVMCPU pVCpu) { return emR3RawForcedActions(pVM, pVCpu, pVCpu->em.s.pCtx); } /** * Process raw-mode specific forced actions. * * This function is called when any FFs in the VM_FF_HIGH_PRIORITY_PRE_RAW_MASK is pending. * * @returns VBox status code. May return VINF_EM_NO_MEMORY but none of the other * EM statuses. * @param pVM The VM handle. * @param pVCpu The VMCPU handle. * @param pCtx The guest CPUM register context. */ static int emR3RawForcedActions(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx) { /* * Note that the order is *vitally* important! * Also note that SELMR3UpdateFromCPUM may trigger VM_FF_SELM_SYNC_TSS. */ /* * Sync selector tables. */ if (VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_SELM_SYNC_GDT | VMCPU_FF_SELM_SYNC_LDT)) { int rc = SELMR3UpdateFromCPUM(pVM, pVCpu); if (RT_FAILURE(rc)) return rc; } /* * Sync IDT. * * The CSAMR3CheckGates call in TRPMR3SyncIDT may call PGMPrefetchPage * and PGMShwModifyPage, so we're in for trouble if for instance a * PGMSyncCR3+pgmR3PoolClearAll is pending. */ if (VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_TRPM_SYNC_IDT)) { if ( VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_PGM_SYNC_CR3) && EMIsRawRing0Enabled(pVM) && CSAMIsEnabled(pVM)) { int rc = PGMSyncCR3(pVCpu, pCtx->cr0, pCtx->cr3, pCtx->cr4, VMCPU_FF_ISSET(pVCpu, VMCPU_FF_PGM_SYNC_CR3)); if (RT_FAILURE(rc)) return rc; } int rc = TRPMR3SyncIDT(pVM, pVCpu); if (RT_FAILURE(rc)) return rc; } /* * Sync TSS. */ if (VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_SELM_SYNC_TSS)) { int rc = SELMR3SyncTSS(pVM, pVCpu); if (RT_FAILURE(rc)) return rc; } /* * Sync page directory. */ if (VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_PGM_SYNC_CR3 | VMCPU_FF_PGM_SYNC_CR3_NON_GLOBAL)) { Assert(pVCpu->em.s.enmState != EMSTATE_WAIT_SIPI); int rc = PGMSyncCR3(pVCpu, pCtx->cr0, pCtx->cr3, pCtx->cr4, VMCPU_FF_ISSET(pVCpu, VMCPU_FF_PGM_SYNC_CR3)); if (RT_FAILURE(rc)) return rc; Assert(!VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_SELM_SYNC_GDT | VMCPU_FF_SELM_SYNC_LDT)); /* Prefetch pages for EIP and ESP. */ /** @todo This is rather expensive. Should investigate if it really helps at all. */ rc = PGMPrefetchPage(pVCpu, SELMToFlat(pVM, DIS_SELREG_CS, CPUMCTX2CORE(pCtx), pCtx->rip)); if (rc == VINF_SUCCESS) rc = PGMPrefetchPage(pVCpu, SELMToFlat(pVM, DIS_SELREG_SS, CPUMCTX2CORE(pCtx), pCtx->rsp)); if (rc != VINF_SUCCESS) { if (rc != VINF_PGM_SYNC_CR3) { AssertLogRelMsgReturn(RT_FAILURE(rc), ("%Rrc\n", rc), VERR_IPE_UNEXPECTED_INFO_STATUS); return rc; } rc = PGMSyncCR3(pVCpu, pCtx->cr0, pCtx->cr3, pCtx->cr4, VMCPU_FF_ISSET(pVCpu, VMCPU_FF_PGM_SYNC_CR3)); if (RT_FAILURE(rc)) return rc; } /** @todo maybe prefetch the supervisor stack page as well */ Assert(!VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_SELM_SYNC_GDT | VMCPU_FF_SELM_SYNC_LDT)); } /* * Allocate handy pages (just in case the above actions have consumed some pages). */ if (VM_FF_IS_PENDING_EXCEPT(pVM, VM_FF_PGM_NEED_HANDY_PAGES, VM_FF_PGM_NO_MEMORY)) { int rc = PGMR3PhysAllocateHandyPages(pVM); if (RT_FAILURE(rc)) return rc; } /* * Check whether we're out of memory now. * * This may stem from some of the above actions or operations that has been executed * since we ran FFs. The allocate handy pages must for instance always be followed by * this check. */ if (VM_FF_ISPENDING(pVM, VM_FF_PGM_NO_MEMORY)) return VINF_EM_NO_MEMORY; return VINF_SUCCESS; } /** * Executes raw code. * * This function contains the raw-mode version of the inner * execution loop (the outer loop being in EMR3ExecuteVM()). * * @returns VBox status code. The most important ones are: VINF_EM_RESCHEDULE, * VINF_EM_RESCHEDULE_REM, VINF_EM_SUSPEND, VINF_EM_RESET and VINF_EM_TERMINATE. * * @param pVM VM handle. * @param pVCpu VMCPU handle. * @param pfFFDone Where to store an indicator telling whether or not * FFs were done before returning. */ int emR3RawExecute(PVM pVM, PVMCPU pVCpu, bool *pfFFDone) { STAM_REL_PROFILE_ADV_START(&pVCpu->em.s.StatRAWTotal, a); int rc = VERR_INTERNAL_ERROR; PCPUMCTX pCtx = pVCpu->em.s.pCtx; LogFlow(("emR3RawExecute: (cs:eip=%04x:%08x)\n", pCtx->cs, pCtx->eip)); pVCpu->em.s.fForceRAW = false; *pfFFDone = false; /* * * Spin till we get a forced action or raw mode status code resulting in * in anything but VINF_SUCCESS or VINF_EM_RESCHEDULE_RAW. * */ for (;;) { STAM_PROFILE_ADV_START(&pVCpu->em.s.StatRAWEntry, b); /* * Check various preconditions. */ #ifdef VBOX_STRICT Assert(REMR3QueryPendingInterrupt(pVM, pVCpu) == REM_NO_PENDING_IRQ); Assert(pCtx->eflags.Bits.u1VM || (pCtx->ss & X86_SEL_RPL) == 3 || (pCtx->ss & X86_SEL_RPL) == 0); AssertMsg( (pCtx->eflags.u32 & X86_EFL_IF) || PATMShouldUseRawMode(pVM, (RTGCPTR)pCtx->eip), ("Tried to execute code with IF at EIP=%08x!\n", pCtx->eip)); if ( !VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_PGM_SYNC_CR3 | VMCPU_FF_PGM_SYNC_CR3_NON_GLOBAL) && PGMMapHasConflicts(pVM)) { PGMMapCheck(pVM); AssertMsgFailed(("We should not get conflicts any longer!!!\n")); return VERR_INTERNAL_ERROR; } #endif /* VBOX_STRICT */ /* * Process high priority pre-execution raw-mode FFs. */ if ( VM_FF_ISPENDING(pVM, VM_FF_HIGH_PRIORITY_PRE_RAW_MASK) || VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_HIGH_PRIORITY_PRE_RAW_MASK)) { rc = emR3RawForcedActions(pVM, pVCpu, pCtx); if (rc != VINF_SUCCESS) break; } /* * If we're going to execute ring-0 code, the guest state needs to * be modified a bit and some of the state components (IF, SS/CS RPL, * and perhaps EIP) needs to be stored with PATM. */ rc = CPUMRawEnter(pVCpu, NULL); if (rc != VINF_SUCCESS) { STAM_PROFILE_ADV_STOP(&pVCpu->em.s.StatRAWEntry, b); break; } /* * Scan code before executing it. Don't bother with user mode or V86 code */ if ( (pCtx->ss & X86_SEL_RPL) <= 1 && !pCtx->eflags.Bits.u1VM && !PATMIsPatchGCAddr(pVM, pCtx->eip)) { STAM_PROFILE_ADV_SUSPEND(&pVCpu->em.s.StatRAWEntry, b); CSAMR3CheckCodeEx(pVM, CPUMCTX2CORE(pCtx), pCtx->eip); STAM_PROFILE_ADV_RESUME(&pVCpu->em.s.StatRAWEntry, b); if ( VM_FF_ISPENDING(pVM, VM_FF_HIGH_PRIORITY_PRE_RAW_MASK) || VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_HIGH_PRIORITY_PRE_RAW_MASK)) { rc = emR3RawForcedActions(pVM, pVCpu, pCtx); if (rc != VINF_SUCCESS) { rc = CPUMRawLeave(pVCpu, NULL, rc); break; } } } #ifdef LOG_ENABLED /* * Log important stuff before entering GC. */ PPATMGCSTATE pGCState = PATMR3QueryGCStateHC(pVM); if (pCtx->eflags.Bits.u1VM) Log(("RV86: %04X:%08X IF=%d VMFlags=%x\n", pCtx->cs, pCtx->eip, pCtx->eflags.Bits.u1IF, pGCState->uVMFlags)); else if ((pCtx->ss & X86_SEL_RPL) == 1) { bool fCSAMScanned = CSAMIsPageScanned(pVM, (RTGCPTR)pCtx->eip); Log(("RR0: %08X ESP=%08X IF=%d VMFlags=%x PIF=%d CPL=%d (Scanned=%d)\n", pCtx->eip, pCtx->esp, pCtx->eflags.Bits.u1IF, pGCState->uVMFlags, pGCState->fPIF, (pCtx->ss & X86_SEL_RPL), fCSAMScanned)); } else if ((pCtx->ss & X86_SEL_RPL) == 3) Log(("RR3: %08X ESP=%08X IF=%d VMFlags=%x\n", pCtx->eip, pCtx->esp, pCtx->eflags.Bits.u1IF, pGCState->uVMFlags)); #endif /* LOG_ENABLED */ /* * Execute the code. */ STAM_PROFILE_ADV_STOP(&pVCpu->em.s.StatRAWEntry, b); STAM_PROFILE_START(&pVCpu->em.s.StatRAWExec, c); rc = VMMR3RawRunGC(pVM, pVCpu); STAM_PROFILE_STOP(&pVCpu->em.s.StatRAWExec, c); STAM_PROFILE_ADV_START(&pVCpu->em.s.StatRAWTail, d); LogFlow(("RR0-E: %08X ESP=%08X IF=%d VMFlags=%x PIF=%d CPL=%d\n", pCtx->eip, pCtx->esp, pCtx->eflags.Bits.u1IF, pGCState->uVMFlags, pGCState->fPIF, (pCtx->ss & X86_SEL_RPL))); LogFlow(("VMMR3RawRunGC returned %Rrc\n", rc)); /* * Restore the real CPU state and deal with high priority post * execution FFs before doing anything else. */ rc = CPUMRawLeave(pVCpu, NULL, rc); VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_RESUME_GUEST_MASK); if ( VM_FF_ISPENDING(pVM, VM_FF_HIGH_PRIORITY_POST_MASK) || VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_HIGH_PRIORITY_POST_MASK)) rc = emR3HighPriorityPostForcedActions(pVM, pVCpu, rc); #ifdef VBOX_STRICT /* * Assert TSS consistency & rc vs patch code. */ if ( !VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_SELM_SYNC_TSS | VMCPU_FF_SELM_SYNC_GDT) /* GDT implies TSS at the moment. */ && EMIsRawRing0Enabled(pVM)) SELMR3CheckTSS(pVM); switch (rc) { case VINF_SUCCESS: case VINF_EM_RAW_INTERRUPT: case VINF_PATM_PATCH_TRAP_PF: case VINF_PATM_PATCH_TRAP_GP: case VINF_PATM_PATCH_INT3: case VINF_PATM_CHECK_PATCH_PAGE: case VINF_EM_RAW_EXCEPTION_PRIVILEGED: case VINF_EM_RAW_GUEST_TRAP: case VINF_EM_RESCHEDULE_RAW: break; default: if (PATMIsPatchGCAddr(pVM, pCtx->eip) && !(pCtx->eflags.u32 & X86_EFL_TF)) LogIt(NULL, 0, LOG_GROUP_PATM, ("Patch code interrupted at %RRv for reason %Rrc\n", (RTRCPTR)CPUMGetGuestEIP(pVCpu), rc)); break; } /* * Let's go paranoid! */ if ( !VMCPU_FF_ISPENDING(pVCpu, VMCPU_FF_PGM_SYNC_CR3 | VMCPU_FF_PGM_SYNC_CR3_NON_GLOBAL) && PGMMapHasConflicts(pVM)) { PGMMapCheck(pVM); AssertMsgFailed(("We should not get conflicts any longer!!! rc=%Rrc\n", rc)); return VERR_INTERNAL_ERROR; } #endif /* VBOX_STRICT */ /* * Process the returned status code. */ if (rc >= VINF_EM_FIRST && rc <= VINF_EM_LAST) { STAM_PROFILE_ADV_STOP(&pVCpu->em.s.StatRAWTail, d); break; } rc = emR3RawHandleRC(pVM, pVCpu, pCtx, rc); if (rc != VINF_SUCCESS) { rc = emR3RawUpdateForceFlag(pVM, pVCpu, pCtx, rc); if (rc != VINF_SUCCESS) { STAM_PROFILE_ADV_STOP(&pVCpu->em.s.StatRAWTail, d); break; } } /* * Check and execute forced actions. */ #ifdef VBOX_HIGH_RES_TIMERS_HACK TMTimerPollVoid(pVM, pVCpu); #endif STAM_PROFILE_ADV_STOP(&pVCpu->em.s.StatRAWTail, d); if ( VM_FF_ISPENDING(pVM, ~VM_FF_HIGH_PRIORITY_PRE_RAW_MASK | VM_FF_PGM_NO_MEMORY) || VMCPU_FF_ISPENDING(pVCpu, ~VMCPU_FF_HIGH_PRIORITY_PRE_RAW_MASK)) { Assert(pCtx->eflags.Bits.u1VM || (pCtx->ss & X86_SEL_RPL) != 1); STAM_REL_PROFILE_ADV_SUSPEND(&pVCpu->em.s.StatRAWTotal, a); rc = emR3ForcedActions(pVM, pVCpu, rc); STAM_REL_PROFILE_ADV_RESUME(&pVCpu->em.s.StatRAWTotal, a); if ( rc != VINF_SUCCESS && rc != VINF_EM_RESCHEDULE_RAW) { rc = emR3RawUpdateForceFlag(pVM, pVCpu, pCtx, rc); if (rc != VINF_SUCCESS) { *pfFFDone = true; break; } } } } /* * Return to outer loop. */ #if defined(LOG_ENABLED) && defined(DEBUG) RTLogFlush(NULL); #endif STAM_REL_PROFILE_ADV_STOP(&pVCpu->em.s.StatRAWTotal, a); return rc; }