/* $Id: PDMAll.cpp 37475 2011-06-15 16:42:55Z vboxsync $ */ /** @file * PDM Critical Sections */ /* * Copyright (C) 2006-2007 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_PDM #include "PDMInternal.h" #include #include #include #include #include #include #include /** * Gets the pending interrupt. * * @returns VBox status code. * @param pVCpu VMCPU handle. * @param pu8Interrupt Where to store the interrupt on success. */ VMMDECL(int) PDMGetInterrupt(PVMCPU pVCpu, uint8_t *pu8Interrupt) { PVM pVM = pVCpu->CTX_SUFF(pVM); pdmLock(pVM); /* * The local APIC has a higher priority than the PIC. */ if (VMCPU_FF_ISSET(pVCpu, VMCPU_FF_INTERRUPT_APIC)) { VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_INTERRUPT_APIC); Assert(pVM->pdm.s.Apic.CTX_SUFF(pDevIns)); Assert(pVM->pdm.s.Apic.CTX_SUFF(pfnGetInterrupt)); int i = pVM->pdm.s.Apic.CTX_SUFF(pfnGetInterrupt)(pVM->pdm.s.Apic.CTX_SUFF(pDevIns)); AssertMsg(i <= 255 && i >= 0, ("i=%d\n", i)); if (i >= 0) { pdmUnlock(pVM); *pu8Interrupt = (uint8_t)i; return VINF_SUCCESS; } } /* * Check the PIC. */ if (VMCPU_FF_ISSET(pVCpu, VMCPU_FF_INTERRUPT_PIC)) { VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_INTERRUPT_PIC); Assert(pVM->pdm.s.Pic.CTX_SUFF(pDevIns)); Assert(pVM->pdm.s.Pic.CTX_SUFF(pfnGetInterrupt)); int i = pVM->pdm.s.Pic.CTX_SUFF(pfnGetInterrupt)(pVM->pdm.s.Pic.CTX_SUFF(pDevIns)); AssertMsg(i <= 255 && i >= 0, ("i=%d\n", i)); if (i >= 0) { pdmUnlock(pVM); *pu8Interrupt = (uint8_t)i; return VINF_SUCCESS; } } /** @todo Figure out exactly why we can get here without anything being set. (REM) */ pdmUnlock(pVM); return VERR_NO_DATA; } /** * Sets the pending interrupt coming from ISA source or HPET. * * @returns VBox status code. * @param pVM VM handle. * @param u8Irq The IRQ line. * @param u8Level The new level. */ VMMDECL(int) PDMIsaSetIrq(PVM pVM, uint8_t u8Irq, uint8_t u8Level) { pdmLock(pVM); int rc = VERR_PDM_NO_PIC_INSTANCE; if (pVM->pdm.s.Pic.CTX_SUFF(pDevIns)) { Assert(pVM->pdm.s.Pic.CTX_SUFF(pfnSetIrq)); pVM->pdm.s.Pic.CTX_SUFF(pfnSetIrq)(pVM->pdm.s.Pic.CTX_SUFF(pDevIns), u8Irq, u8Level); rc = VINF_SUCCESS; } if (pVM->pdm.s.IoApic.CTX_SUFF(pDevIns)) { Assert(pVM->pdm.s.IoApic.CTX_SUFF(pfnSetIrq)); /** * Apply Interrupt Source Override rules. * See ACPI 4.0 specification 5.2.12.4 and 5.2.12.5 for details on * interrupt source override. * Shortly, ISA IRQ0 is electically connected to pin 2 on IO-APIC, and some OSes, * notably recent OS X rely upon this configuration. * If changing, also update override rules in MADT and MPS. */ /* ISA IRQ0 routed to pin 2, all others ISA sources are identity mapped */ if (u8Irq == 0) u8Irq = 2; pVM->pdm.s.IoApic.CTX_SUFF(pfnSetIrq)(pVM->pdm.s.IoApic.CTX_SUFF(pDevIns), u8Irq, u8Level); rc = VINF_SUCCESS; } pdmUnlock(pVM); return rc; } /** * Sets the pending I/O APIC interrupt. * * @returns VBox status code. * @param pVM VM handle. * @param u8Irq The IRQ line. * @param u8Level The new level. */ VMMDECL(int) PDMIoApicSetIrq(PVM pVM, uint8_t u8Irq, uint8_t u8Level) { if (pVM->pdm.s.IoApic.CTX_SUFF(pDevIns)) { Assert(pVM->pdm.s.IoApic.CTX_SUFF(pfnSetIrq)); pdmLock(pVM); pVM->pdm.s.IoApic.CTX_SUFF(pfnSetIrq)(pVM->pdm.s.IoApic.CTX_SUFF(pDevIns), u8Irq, u8Level); pdmUnlock(pVM); return VINF_SUCCESS; } return VERR_PDM_NO_PIC_INSTANCE; } /** * Send a MSI to an I/O APIC. * * @returns VBox status code. * @param pVM VM handle. * @param GCAddr Request address. * @param u8Value Request value. */ VMMDECL(int) PDMIoApicSendMsi(PVM pVM, RTGCPHYS GCAddr, uint32_t uValue) { if (pVM->pdm.s.IoApic.CTX_SUFF(pDevIns)) { Assert(pVM->pdm.s.IoApic.CTX_SUFF(pfnSendMsi)); pdmLock(pVM); pVM->pdm.s.IoApic.CTX_SUFF(pfnSendMsi)(pVM->pdm.s.IoApic.CTX_SUFF(pDevIns), GCAddr, uValue); pdmUnlock(pVM); return VINF_SUCCESS; } return VERR_PDM_NO_PIC_INSTANCE; } /** * Returns presence of an IO-APIC * * @returns VBox true if IO-APIC is present * @param pVM VM handle. */ VMMDECL(bool) PDMHasIoApic(PVM pVM) { return pVM->pdm.s.IoApic.CTX_SUFF(pDevIns) != NULL; } /** * Set the APIC base. * * @returns VBox status code. * @param pVM VM handle. * @param u64Base The new base. */ VMMDECL(int) PDMApicSetBase(PVM pVM, uint64_t u64Base) { if (pVM->pdm.s.Apic.CTX_SUFF(pDevIns)) { Assert(pVM->pdm.s.Apic.CTX_SUFF(pfnSetBase)); pdmLock(pVM); pVM->pdm.s.Apic.CTX_SUFF(pfnSetBase)(pVM->pdm.s.Apic.CTX_SUFF(pDevIns), u64Base); pdmUnlock(pVM); return VINF_SUCCESS; } return VERR_PDM_NO_APIC_INSTANCE; } /** * Get the APIC base. * * @returns VBox status code. * @param pVM VM handle. * @param pu64Base Where to store the APIC base. */ VMMDECL(int) PDMApicGetBase(PVM pVM, uint64_t *pu64Base) { if (pVM->pdm.s.Apic.CTX_SUFF(pDevIns)) { Assert(pVM->pdm.s.Apic.CTX_SUFF(pfnGetBase)); pdmLock(pVM); *pu64Base = pVM->pdm.s.Apic.CTX_SUFF(pfnGetBase)(pVM->pdm.s.Apic.CTX_SUFF(pDevIns)); pdmUnlock(pVM); return VINF_SUCCESS; } *pu64Base = 0; return VERR_PDM_NO_APIC_INSTANCE; } /** * Check if the APIC has a pending interrupt/if a TPR change would active one. * * @returns VINF_SUCCESS or VERR_PDM_NO_APIC_INSTANCE. * @param pDevIns Device instance of the APIC. * @param pfPending Pending state (out). */ VMMDECL(int) PDMApicHasPendingIrq(PVM pVM, bool *pfPending) { if (pVM->pdm.s.Apic.CTX_SUFF(pDevIns)) { Assert(pVM->pdm.s.Apic.CTX_SUFF(pfnSetTPR)); pdmLock(pVM); *pfPending = pVM->pdm.s.Apic.CTX_SUFF(pfnHasPendingIrq)(pVM->pdm.s.Apic.CTX_SUFF(pDevIns)); pdmUnlock(pVM); return VINF_SUCCESS; } return VERR_PDM_NO_APIC_INSTANCE; } /** * Set the TPR (task priority register?). * * @returns VBox status code. * @param pVCpu VMCPU handle. * @param u8TPR The new TPR. */ VMMDECL(int) PDMApicSetTPR(PVMCPU pVCpu, uint8_t u8TPR) { PVM pVM = pVCpu->CTX_SUFF(pVM); if (pVM->pdm.s.Apic.CTX_SUFF(pDevIns)) { Assert(pVM->pdm.s.Apic.CTX_SUFF(pfnSetTPR)); pdmLock(pVM); pVM->pdm.s.Apic.CTX_SUFF(pfnSetTPR)(pVM->pdm.s.Apic.CTX_SUFF(pDevIns), pVCpu->idCpu, u8TPR); pdmUnlock(pVM); return VINF_SUCCESS; } return VERR_PDM_NO_APIC_INSTANCE; } /** * Get the TPR (task priority register). * * @returns The current TPR. * @param pVCpu VMCPU handle. * @param pu8TPR Where to store the TRP. * @param pfPending Pending interrupt state (out). */ VMMDECL(int) PDMApicGetTPR(PVMCPU pVCpu, uint8_t *pu8TPR, bool *pfPending) { PVM pVM = pVCpu->CTX_SUFF(pVM); if (pVM->pdm.s.Apic.CTX_SUFF(pDevIns)) { Assert(pVM->pdm.s.Apic.CTX_SUFF(pfnGetTPR)); /* We don't acquire the PDM lock here as we're just reading information. Doing so causes massive * contention as this function is called very often by each and every VCPU. */ *pu8TPR = pVM->pdm.s.Apic.CTX_SUFF(pfnGetTPR)(pVM->pdm.s.Apic.CTX_SUFF(pDevIns), pVCpu->idCpu); if (pfPending) *pfPending = pVM->pdm.s.Apic.CTX_SUFF(pfnHasPendingIrq)(pVM->pdm.s.Apic.CTX_SUFF(pDevIns)); return VINF_SUCCESS; } *pu8TPR = 0; return VERR_PDM_NO_APIC_INSTANCE; } /** * Write a MSR in APIC range. * * @returns VBox status code. * @param pVM VM handle. * @param iCpu Target CPU. * @param u32Reg MSR to write. * @param u64Value Value to write. */ VMMDECL(int) PDMApicWriteMSR(PVM pVM, VMCPUID iCpu, uint32_t u32Reg, uint64_t u64Value) { if (pVM->pdm.s.Apic.CTX_SUFF(pDevIns)) { AssertPtr(pVM->pdm.s.Apic.CTX_SUFF(pfnWriteMSR)); return pVM->pdm.s.Apic.CTX_SUFF(pfnWriteMSR)(pVM->pdm.s.Apic.CTX_SUFF(pDevIns), iCpu, u32Reg, u64Value); } return VERR_PDM_NO_APIC_INSTANCE; } /** * Read a MSR in APIC range. * * @returns VBox status code. * @param pVM VM handle. * @param iCpu Target CPU. * @param u32Reg MSR to read. * @param pu64Value Value read. */ VMMDECL(int) PDMApicReadMSR(PVM pVM, VMCPUID iCpu, uint32_t u32Reg, uint64_t *pu64Value) { if (pVM->pdm.s.Apic.CTX_SUFF(pDevIns)) { AssertPtr(pVM->pdm.s.Apic.CTX_SUFF(pfnReadMSR)); pdmLock(pVM); int rc = pVM->pdm.s.Apic.CTX_SUFF(pfnReadMSR)(pVM->pdm.s.Apic.CTX_SUFF(pDevIns), iCpu, u32Reg, pu64Value); pdmUnlock(pVM); return rc; } return VERR_PDM_NO_APIC_INSTANCE; } /** * Locks PDM. * This might call back to Ring-3 in order to deal with lock contention in GC and R3. * * @param pVM The VM handle. */ void pdmLock(PVM pVM) { #ifdef IN_RING3 int rc = PDMCritSectEnter(&pVM->pdm.s.CritSect, VERR_INTERNAL_ERROR); #else int rc = PDMCritSectEnter(&pVM->pdm.s.CritSect, VERR_GENERAL_FAILURE); if (rc == VERR_GENERAL_FAILURE) rc = VMMRZCallRing3NoCpu(pVM, VMMCALLRING3_PDM_LOCK, 0); #endif AssertRC(rc); } /** * Locks PDM but don't go to ring-3 if it's owned by someone. * * @returns VINF_SUCCESS on success. * @returns rc if we're in GC or R0 and can't get the lock. * @param pVM The VM handle. * @param rc The RC to return in GC or R0 when we can't get the lock. */ int pdmLockEx(PVM pVM, int rc) { return PDMCritSectEnter(&pVM->pdm.s.CritSect, rc); } /** * Unlocks PDM. * * @param pVM The VM handle. */ void pdmUnlock(PVM pVM) { PDMCritSectLeave(&pVM->pdm.s.CritSect); } /** * Converts ring 3 VMM heap pointer to a guest physical address * * @returns VBox status code. * @param pVM VM handle. * @param pv Ring-3 pointer. * @param pGCPhys GC phys address (out). */ VMMDECL(int) PDMVMMDevHeapR3ToGCPhys(PVM pVM, RTR3PTR pv, RTGCPHYS *pGCPhys) { /* Don't assert here as this is called before we can catch ring-0 assertions. */ if (RT_UNLIKELY((RTR3UINTPTR)pv - (RTR3UINTPTR)pVM->pdm.s.pvVMMDevHeap >= pVM->pdm.s.cbVMMDevHeap)) { Log(("PDMVMMDevHeapR3ToGCPhys: pv=%p pvVMMDevHeap=%p cbVMMDevHeap=%#x\n", pv, pVM->pdm.s.pvVMMDevHeap, pVM->pdm.s.cbVMMDevHeap)); return VERR_INTERNAL_ERROR_3; } *pGCPhys = (pVM->pdm.s.GCPhysVMMDevHeap + ((RTR3UINTPTR)pv - (RTR3UINTPTR)pVM->pdm.s.pvVMMDevHeap)); return VINF_SUCCESS; } /** * Checks if the vmm device heap is enabled (== vmm device's pci region mapped) * * @returns dev heap enabled status (true/false) * @param pVM VM handle. */ VMMDECL(bool) PDMVMMDevHeapIsEnabled(PVM pVM) { return (pVM->pdm.s.pvVMMDevHeap != NULL); }