/* $Id: SELMGC.cpp 8155 2008-04-18 15:16:47Z vboxsync $ */ /** @file * SELM - The Selector Manager, Guest Context. */ /* * Copyright (C) 2006-2007 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_SELM #include #include #include #include #include "SELMInternal.h" #include #include #include #include #include #include #include /** * Synchronizes one GDT entry (guest -> shadow). * * @returns VBox status code (appropriate for trap handling and GC return). * @param pVM VM Handle. * @param pRegFrame Trap register frame. * @param iGDTEntry The GDT entry to sync. */ static int selmGCSyncGDTEntry(PVM pVM, PCPUMCTXCORE pRegFrame, unsigned iGDTEntry) { Log2(("GDT %04X LDTR=%04X\n", iGDTEntry, CPUMGetGuestLDTR(pVM))); /* * Validate the offset. */ VBOXGDTR GdtrGuest; CPUMGetGuestGDTR(pVM, &GdtrGuest); unsigned offEntry = iGDTEntry * sizeof(VBOXDESC); if ( iGDTEntry >= SELM_GDT_ELEMENTS || offEntry > GdtrGuest.cbGdt) return VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT; /* * Read the guest descriptor. */ VBOXDESC Desc; int rc = MMGCRamRead(pVM, &Desc, (uint8_t *)GdtrGuest.pGdt + offEntry, sizeof(VBOXDESC)); if (VBOX_FAILURE(rc)) return VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT; /* * Check for conflicts. */ RTSEL Sel = iGDTEntry << X86_SEL_SHIFT; Assert( !(pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS] & ~X86_SEL_MASK) && !(pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS] & ~X86_SEL_MASK) && !(pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS64] & ~X86_SEL_MASK) && !(pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] & ~X86_SEL_MASK) && !(pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] & ~X86_SEL_MASK)); if ( pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS] == Sel || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS] == Sel || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS64] == Sel || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] == Sel || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] == Sel) { if (Desc.Gen.u1Present) { Log(("selmGCSyncGDTEntry: Sel=%d Desc=%.8Vhxs: detected conflict!!\n", Sel, &Desc)); return VINF_SELM_SYNC_GDT; } Log(("selmGCSyncGDTEntry: Sel=%d Desc=%.8Vhxs: potential conflict (still not present)!\n", Sel, &Desc)); /* Note: we can't continue below or else we'll change the shadow descriptor!! */ /* When the guest makes the selector present, then we'll do a GDT sync. */ return VINF_SUCCESS; } /* * Code and data selectors are generally 1:1, with the * 'little' adjustment we do for DPL 0 selectors. */ PVBOXDESC pShadowDescr = &pVM->selm.s.paGdtGC[iGDTEntry]; if (Desc.Gen.u1DescType) { /* * Hack for A-bit against Trap E on read-only GDT. */ /** @todo Fix this by loading ds and cs before turning off WP. */ Desc.Gen.u4Type |= X86_SEL_TYPE_ACCESSED; /* * All DPL 0 code and data segments are squeezed into DPL 1. * * We're skipping conforming segments here because those * cannot give us any trouble. */ if ( Desc.Gen.u2Dpl == 0 && (Desc.Gen.u4Type & (X86_SEL_TYPE_CODE | X86_SEL_TYPE_CONF)) != (X86_SEL_TYPE_CODE | X86_SEL_TYPE_CONF) ) Desc.Gen.u2Dpl = 1; } else { /* * System type selectors are marked not present. * Recompiler or special handling is required for these. */ /** @todo what about interrupt gates and rawr0? */ Desc.Gen.u1Present = 0; } //Log(("O: base=%08X limit=%08X attr=%04X\n", pShadowDescr->Gen.u16BaseLow | (pShadowDescr->Gen.u8BaseHigh1 << 16) | (pShadowDescr->Gen.u8BaseHigh2 << 24), pShadowDescr->Gen.u16LimitLow | (pShadowDescr->Gen.u4LimitHigh << 16), (pShadowDescr->au32[1] >> 8) & 0xFFFF )); //Log(("N: base=%08X limit=%08X attr=%04X\n", Desc.Gen.u16BaseLow | (Desc.Gen.u8BaseHigh1 << 16) | (Desc.Gen.u8BaseHigh2 << 24), Desc.Gen.u16LimitLow | (Desc.Gen.u4LimitHigh << 16), (Desc.au32[1] >> 8) & 0xFFFF )); *pShadowDescr = Desc; /* Check if we change the LDT selector */ if (Sel == CPUMGetGuestLDTR(pVM)) { VM_FF_SET(pVM, VM_FF_SELM_SYNC_LDT); return VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT; } /* Or the TR selector */ if (Sel == CPUMGetGuestTR(pVM)) { VM_FF_SET(pVM, VM_FF_SELM_SYNC_TSS); return VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT; } #ifdef VBOX_STRICT if (Sel == (pRegFrame->cs & X86_SEL_MASK)) Log(("GDT write to selector in CS register %04X\n", pRegFrame->cs)); else if (Sel == (pRegFrame->ds & X86_SEL_MASK)) Log(("GDT write to selector in DS register %04X\n", pRegFrame->ds)); else if (Sel == (pRegFrame->es & X86_SEL_MASK)) Log(("GDT write to selector in ES register %04X\n", pRegFrame->es)); else if (Sel == (pRegFrame->fs & X86_SEL_MASK)) Log(("GDT write to selector in FS register %04X\n", pRegFrame->fs)); else if (Sel == (pRegFrame->gs & X86_SEL_MASK)) Log(("GDT write to selector in GS register %04X\n", pRegFrame->gs)); else if (Sel == (pRegFrame->ss & X86_SEL_MASK)) Log(("GDT write to selector in SS register %04X\n", pRegFrame->ss)); #endif return VINF_SUCCESS; } /** * \#PF Virtual Handler callback for Guest write access to the Guest's own GDT. * * @returns VBox status code (appropriate for trap handling and GC return). * @param pVM VM Handle. * @param uErrorCode CPU Error code. * @param pRegFrame Trap register frame. * @param pvFault The fault address (cr2). * @param pvRange The base address of the handled virtual range. * @param offRange The offset of the access into this range. * (If it's a EIP range this's the EIP, if not it's pvFault.) */ SELMGCDECL(int) selmgcGuestGDTWriteHandler(PVM pVM, RTGCUINT uErrorCode, PCPUMCTXCORE pRegFrame, void *pvFault, void *pvRange, uintptr_t offRange) { LogFlow(("selmgcGuestGDTWriteHandler errcode=%x fault=%08x offRange=%08x\n", uErrorCode, pvFault, offRange)); /* * First check if this is the LDT entry. * LDT updates are problemous since an invalid LDT entry will cause trouble during worldswitch. */ int rc; if (CPUMGetGuestLDTR(pVM) / sizeof(VBOXDESC) == offRange / sizeof(VBOXDESC)) { Log(("LDTR selector change -> fall back to HC!!\n")); rc = VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT; /** @todo We're not handling changed to the selectors in LDTR and TR correctly at all. * We should ignore any changes to those and sync them only when they are loaded by the guest! */ } else { /* * Attempt to emulate the instruction and sync the affected entries. */ /** @todo should check if any affected selectors are loaded. */ uint32_t cb; rc = EMInterpretInstruction(pVM, pRegFrame, pvFault, &cb); if (VBOX_SUCCESS(rc) && cb) { unsigned iGDTE1 = offRange / sizeof(VBOXDESC); int rc2 = selmGCSyncGDTEntry(pVM, pRegFrame, iGDTE1); if (rc2 == VINF_SUCCESS) { Assert(cb); unsigned iGDTE2 = (offRange + cb - 1) / sizeof(VBOXDESC); if (iGDTE1 != iGDTE2) rc2 = selmGCSyncGDTEntry(pVM, pRegFrame, iGDTE2); if (rc2 == VINF_SUCCESS) { STAM_COUNTER_INC(&pVM->selm.s.StatGCWriteGuestGDTHandled); return rc; } } if (rc == VINF_SUCCESS || VBOX_FAILURE(rc2)) rc = rc2; } else { Assert(VBOX_FAILURE(rc)); if (rc == VERR_EM_INTERPRETER) rc = VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT; } } if ( rc != VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT && rc != VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT) { /* Not necessary when we need to go back to the host context to sync the LDT or TSS. */ VM_FF_SET(pVM, VM_FF_SELM_SYNC_GDT); } STAM_COUNTER_INC(&pVM->selm.s.StatGCWriteGuestGDTUnhandled); return rc; } /** * \#PF Virtual Handler callback for Guest write access to the Guest's own LDT. * * @returns VBox status code (appropriate for trap handling and GC return). * @param pVM VM Handle. * @param uErrorCode CPU Error code. * @param pRegFrame Trap register frame. * @param pvFault The fault address (cr2). * @param pvRange The base address of the handled virtual range. * @param offRange The offset of the access into this range. * (If it's a EIP range this's the EIP, if not it's pvFault.) */ SELMGCDECL(int) selmgcGuestLDTWriteHandler(PVM pVM, RTGCUINT uErrorCode, PCPUMCTXCORE pRegFrame, void *pvFault, void *pvRange, uintptr_t offRange) { /** @todo To be implemented. */ ////LogCom(("selmgcGuestLDTWriteHandler: eip=%08X pvFault=%08X pvRange=%08X\r\n", pRegFrame->eip, pvFault, pvRange)); VM_FF_SET(pVM, VM_FF_SELM_SYNC_LDT); STAM_COUNTER_INC(&pVM->selm.s.StatGCWriteGuestLDT); return VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT; } /** * \#PF Virtual Handler callback for Guest write access to the Guest's own current TSS. * * @returns VBox status code (appropriate for trap handling and GC return). * @param pVM VM Handle. * @param uErrorCode CPU Error code. * @param pRegFrame Trap register frame. * @param pvFault The fault address (cr2). * @param pvRange The base address of the handled virtual range. * @param offRange The offset of the access into this range. * (If it's a EIP range this's the EIP, if not it's pvFault.) */ SELMGCDECL(int) selmgcGuestTSSWriteHandler(PVM pVM, RTGCUINT uErrorCode, PCPUMCTXCORE pRegFrame, void *pvFault, void *pvRange, uintptr_t offRange) { LogFlow(("selmgcGuestTSSWriteHandler errcode=%x fault=%08x offRange=%08x\n", uErrorCode, pvFault, offRange)); /* * Try emulate the access and compare the R0 ss:esp with the shadow tss values. * * Note, that it's safe to access the TSS after a successfull instruction emulation, * even if the stuff that was changed wasn't the ss0 or esp0 bits. The CPU insists * on the TSS being all one physical page, so ASSUMING that we're not trapping * I/O map accesses this is safe. */ uint32_t cb; int rc = EMInterpretInstruction(pVM, pRegFrame, pvFault, &cb); if (VBOX_SUCCESS(rc) && cb) { PCVBOXTSS pGuestTSS = (PVBOXTSS)pVM->selm.s.GCPtrGuestTss; if ( pGuestTSS->esp0 != pVM->selm.s.Tss.esp1 || pGuestTSS->ss0 != (pVM->selm.s.Tss.ss1 & ~1)) /* undo raw-r0 */ { Log(("selmgcGuestTSSWriteHandler: R0 stack: %RTsel:%VGv -> %RTsel:%VGv\n", (RTSEL)(pVM->selm.s.Tss.ss1 & ~1), pVM->selm.s.Tss.esp1, (RTSEL)pGuestTSS->ss0, pGuestTSS->esp0)); pVM->selm.s.Tss.esp1 = pGuestTSS->esp0; pVM->selm.s.Tss.ss1 = pGuestTSS->ss0 | 1; STAM_COUNTER_INC(&pVM->selm.s.StatGCWriteGuestTSSHandledChanged); } if (CPUMGetGuestCR4(pVM) & X86_CR4_VME) { uint32_t offIntRedirBitmap = pGuestTSS->offIoBitmap - sizeof(pVM->selm.s.Tss.IntRedirBitmap); /** @todo not sure how the partial case is handled; probably not allowed */ if ( offIntRedirBitmap <= offRange && offIntRedirBitmap + sizeof(pVM->selm.s.Tss.IntRedirBitmap) >= offRange + cb && offIntRedirBitmap + sizeof(pVM->selm.s.Tss.IntRedirBitmap) <= pVM->selm.s.cbGuestTss) { Log(("offIoBitmap=%x offIntRedirBitmap=%x cbTSS=%x\n", pGuestTSS->offIoBitmap, offIntRedirBitmap, pVM->selm.s.cbGuestTss)); /** @todo only update the changed part. */ for (uint32_t i = 0; i < sizeof(pVM->selm.s.Tss.IntRedirBitmap) / 8;i++) { rc = MMGCRamRead(pVM, &pVM->selm.s.Tss.IntRedirBitmap[i * 8], (uint8_t *)pGuestTSS + offIntRedirBitmap + i * 8, 8); if (VBOX_FAILURE(rc)) { /* Shadow page table might be out of sync */ rc = PGMPrefetchPage(pVM, (uint8_t *)pGuestTSS + offIntRedirBitmap + i*8); if (VBOX_FAILURE(rc)) { AssertMsg(rc == VINF_SUCCESS, ("PGMPrefetchPage %VGv failed with %Vrc\n", (uint8_t *)pGuestTSS + offIntRedirBitmap + i*8, rc)); break; } rc = MMGCRamRead(pVM, &pVM->selm.s.Tss.IntRedirBitmap[i * 8], (uint8_t *)pGuestTSS + offIntRedirBitmap + i * 8, 8); } AssertMsg(rc == VINF_SUCCESS, ("MMGCRamRead %VGv failed with %Vrc\n", (uint8_t *)pGuestTSS + offIntRedirBitmap + i * 8, rc)); } STAM_COUNTER_INC(&pVM->selm.s.StatGCWriteGuestTSSRedir); } } STAM_COUNTER_INC(&pVM->selm.s.StatGCWriteGuestTSSHandled); } else { Assert(VBOX_FAILURE(rc)); VM_FF_SET(pVM, VM_FF_SELM_SYNC_TSS); STAM_COUNTER_INC(&pVM->selm.s.StatGCWriteGuestTSSUnhandled); if (rc == VERR_EM_INTERPRETER) rc = VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT; } return rc; } /** * \#PF Virtual Handler callback for Guest write access to the VBox shadow GDT. * * @returns VBox status code (appropriate for trap handling and GC return). * @param pVM VM Handle. * @param uErrorCode CPU Error code. * @param pRegFrame Trap register frame. * @param pvFault The fault address (cr2). * @param pvRange The base address of the handled virtual range. * @param offRange The offset of the access into this range. * (If it's a EIP range this's the EIP, if not it's pvFault.) */ SELMGCDECL(int) selmgcShadowGDTWriteHandler(PVM pVM, RTGCUINT uErrorCode, PCPUMCTXCORE pRegFrame, void *pvFault, void *pvRange, uintptr_t offRange) { LogRel(("FATAL ERROR: selmgcShadowGDTWriteHandler: eip=%08X pvFault=%08X pvRange=%08X\r\n", pRegFrame->eip, pvFault, pvRange)); return VERR_SELM_SHADOW_GDT_WRITE; } /** * \#PF Virtual Handler callback for Guest write access to the VBox shadow LDT. * * @returns VBox status code (appropriate for trap handling and GC return). * @param pVM VM Handle. * @param uErrorCode CPU Error code. * @param pRegFrame Trap register frame. * @param pvFault The fault address (cr2). * @param pvRange The base address of the handled virtual range. * @param offRange The offset of the access into this range. * (If it's a EIP range this's the EIP, if not it's pvFault.) */ SELMGCDECL(int) selmgcShadowLDTWriteHandler(PVM pVM, RTGCUINT uErrorCode, PCPUMCTXCORE pRegFrame, void *pvFault, void *pvRange, uintptr_t offRange) { LogRel(("FATAL ERROR: selmgcShadowLDTWriteHandler: eip=%08X pvFault=%08X pvRange=%08X\r\n", pRegFrame->eip, pvFault, pvRange)); Assert(pvFault >= pVM->selm.s.GCPtrLdt && (uintptr_t)pvFault < (uintptr_t)pVM->selm.s.GCPtrLdt + 65536 + PAGE_SIZE); return VERR_SELM_SHADOW_LDT_WRITE; } /** * \#PF Virtual Handler callback for Guest write access to the VBox shadow TSS. * * @returns VBox status code (appropriate for trap handling and GC return). * @param pVM VM Handle. * @param uErrorCode CPU Error code. * @param pRegFrame Trap register frame. * @param pvFault The fault address (cr2). * @param pvRange The base address of the handled virtual range. * @param offRange The offset of the access into this range. * (If it's a EIP range this's the EIP, if not it's pvFault.) */ SELMGCDECL(int) selmgcShadowTSSWriteHandler(PVM pVM, RTGCUINT uErrorCode, PCPUMCTXCORE pRegFrame, void *pvFault, void *pvRange, uintptr_t offRange) { LogRel(("FATAL ERROR: selmgcShadowTSSWriteHandler: eip=%08X pvFault=%08X pvRange=%08X\r\n", pRegFrame->eip, pvFault, pvRange)); return VERR_SELM_SHADOW_TSS_WRITE; }