; $Id: bs3-mode-EnteredMode.asm 60676 2016-04-24 11:04:57Z vboxsync $ ;; @file ; BS3Kit - Bs3EnteredMode ; ; ; Copyright (C) 2007-2016 Oracle Corporation ; ; This file is part of VirtualBox Open Source Edition (OSE), as ; available from http://www.virtualbox.org. This file is free software; ; you can redistribute it and/or modify it under the terms of the GNU ; General Public License (GPL) as published by the Free Software ; Foundation, in version 2 as it comes in the "COPYING" file of the ; VirtualBox OSE distribution. VirtualBox OSE is distributed in the ; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. ; ; The contents of this file may alternatively be used under the terms ; of the Common Development and Distribution License Version 1.0 ; (CDDL) only, as it comes in the "COPYING.CDDL" file of the ; VirtualBox OSE distribution, in which case the provisions of the ; CDDL are applicable instead of those of the GPL. ; ; You may elect to license modified versions of this file under the ; terms and conditions of either the GPL or the CDDL or both. ; %include "bs3kit-template-header.mac" %if TMPL_BITS == 16 BS3_EXTERN_DATA16 g_uBs3CpuDetected %endif BS3_EXTERN_DATA16 g_bBs3CurrentMode TMPL_BEGIN_TEXT ;; ; @cproto BS3_DECL(void) Bs3EnteredMode(void); ; ; @uses Nothing. ; ; @remarks ASSUMES we're in ring-0 when not in some kind of real mode. ; BS3_PROC_BEGIN_MODE Bs3EnteredMode, BS3_PBC_NEAR ; won't need this outside the switchers, so always near. push xBP mov xBP, xSP push xAX %if BS3_MODE_IS_64BIT_CODE(TMPL_MODE) push rcx push rdx push r8 push r9 %endif ; ; Load stack selector (not always necessary) and sometimes CS too. ; %if BS3_MODE_IS_RM_SYS(TMPL_MODE) xor ax, ax %elif BS3_MODE_IS_V86(TMPL_MODE) extern v86_versions_of_Bs3EnteredMode_should_not_be_dragged_into_the_link call v86_versions_of_Bs3EnteredMode_should_not_be_dragged_into_the_link %elif BS3_MODE_IS_16BIT_CODE(TMPL_MODE) jmp BS3_SEL_R0_CS16:.reloaded_cs .reloaded_cs: mov ax, BS3_SEL_R0_SS16 %elif BS3_MODE_IS_32BIT_CODE(TMPL_MODE) mov ax, BS3_SEL_R0_SS32 %elif BS3_MODE_IS_64BIT_CODE(TMPL_MODE) mov ax, BS3_SEL_R0_DS64 %else %error "TMPL_MODE" %endif mov ss, ax ; ; Load selector appropriate for accessing BS3SYSTEM16 data. ; %if BS3_MODE_IS_16BIT_CODE(TMPL_MODE) mov ax, BS3_SEL_SYSTEM16 %else mov ax, RT_CONCAT(BS3_SEL_R0_DS,TMPL_BITS) %endif mov ds, ax ; ; Load the appropritate IDT or IVT. ; Always 64-bit in long mode, otherwise according to TMPL_BITS. ; %if BS3_MODE_IS_RM_SYS(TMPL_MODE) BS3_EXTERN_SYSTEM16 Bs3Lidt_Ivt TMPL_BEGIN_TEXT lidt [Bs3Lidt_Ivt] %elif BS3_MODE_IS_16BIT_SYS(TMPL_MODE) BS3_EXTERN_SYSTEM16 Bs3Lidt_Idt16 TMPL_BEGIN_TEXT lidt [Bs3Lidt_Idt16 TMPL_WRT_SYSTEM16_OR_FLAT] %elif BS3_MODE_IS_32BIT_SYS(TMPL_MODE) BS3_EXTERN_SYSTEM16 Bs3Lidt_Idt32 TMPL_BEGIN_TEXT lidt [Bs3Lidt_Idt32 TMPL_WRT_SYSTEM16_OR_FLAT] %elif BS3_MODE_IS_64BIT_SYS(TMPL_MODE) BS3_EXTERN_SYSTEM16 Bs3Lidt_Idt64 TMPL_BEGIN_TEXT lidt [Bs3Lidt_Idt64 TMPL_WRT_SYSTEM16_OR_FLAT] %else %error "TMPL_MODE" %endif %if !BS3_MODE_IS_RM_OR_V86(TMPL_MODE) ; ; Load the appropriate task selector. ; Always 64-bit in long mode, otherwise according to TMPL_BITS. ; %if BS3_MODE_IS_64BIT_SYS(TMPL_MODE) BS3_EXTERN_SYSTEM16 Bs3Gdte_Tss64 TMPL_BEGIN_TEXT and byte [5 + Bs3Gdte_Tss64 TMPL_WRT_SYSTEM16_OR_FLAT], ~X86_SEL_TYPE_SYS_TSS_BUSY_MASK mov ax, BS3_SEL_TSS64 %elif BS3_MODE_IS_16BIT_SYS(TMPL_MODE) BS3_EXTERN_SYSTEM16 Bs3Gdte_Tss16 BS3_EXTERN_SYSTEM16 Bs3Gdte_Tss16DoubleFault TMPL_BEGIN_TEXT and byte [5 + Bs3Gdte_Tss16 TMPL_WRT_SYSTEM16_OR_FLAT], ~X86_SEL_TYPE_SYS_TSS_BUSY_MASK and byte [5 + Bs3Gdte_Tss16DoubleFault TMPL_WRT_SYSTEM16_OR_FLAT], ~X86_SEL_TYPE_SYS_TSS_BUSY_MASK mov ax, BS3_SEL_TSS16 %elif BS3_MODE_IS_32BIT_SYS(TMPL_MODE) BS3_EXTERN_SYSTEM16 Bs3Gdte_Tss32 BS3_EXTERN_SYSTEM16 Bs3Gdte_Tss32DoubleFault BS3_EXTERN_SYSTEM16 Bs3Tss32 BS3_EXTERN_SYSTEM16 Bs3Tss32DoubleFault TMPL_BEGIN_TEXT and byte [5 + Bs3Gdte_Tss32 TMPL_WRT_SYSTEM16_OR_FLAT], ~X86_SEL_TYPE_SYS_TSS_BUSY_MASK and byte [5 + Bs3Gdte_Tss32DoubleFault TMPL_WRT_SYSTEM16_OR_FLAT], ~X86_SEL_TYPE_SYS_TSS_BUSY_MASK mov eax, cr3 mov [X86TSS32.cr3 + Bs3Tss32 TMPL_WRT_SYSTEM16_OR_FLAT], eax mov [X86TSS32.cr3 + Bs3Tss32DoubleFault TMPL_WRT_SYSTEM16_OR_FLAT], eax mov ax, BS3_SEL_TSS32 %else %error "TMPL_BITS" %endif ltr ax %endif ; !TMPL_CMN_R86 %if !BS3_MODE_IS_RM_OR_V86(TMPL_MODE) ; ; Load the LDT. ; mov ax, BS3_SEL_LDT lldt ax %endif ; ; Load ds and es; clear fs and gs. ; %if BS3_MODE_IS_RM_OR_V86(TMPL_MODE) mov ax, BS3_SEL_DATA16 %else mov ax, RT_CONCAT(BS3_SEL_R0_DS,TMPL_BITS) %endif mov ds, ax mov es, ax %if TMPL_BITS == 16 ; For restoring after Bs3Trap* calls below. push ax push ax cmp byte [BS3_DATA16_WRT(g_uBs3CpuDetected)], BS3CPU_80286 jbe .skip_fs_gs %endif xor ax, ax mov fs, ax mov gs, ax .skip_fs_gs: ; ; Set global indicating CPU mode. ; mov byte [BS3_DATA16_WRT(g_bBs3CurrentMode)], TMPL_MODE ; ; Install system call handler. ; Always 64-bit in long mode, otherwise according to TMPL_BITS. ; %if BS3_MODE_IS_RM_SYS(TMPL_MODE) extern _Bs3TrapSystemCallHandler_rm mov word [ss: BS3_TRAP_SYSCALL*4], _Bs3TrapSystemCallHandler_rm wrt CGROUP16 mov word [ss: BS3_TRAP_SYSCALL*4 + 2], CGROUP16 %elif BS3_MODE_IS_16BIT_SYS(TMPL_MODE) BS3_EXTERN_CMN Bs3Trap16SetGate extern TMPL_NM(Bs3TrapSystemCallHandler) BS3_BEGIN_TEXT16 TMPL_BEGIN_TEXT push 0 ; cParams push TMPL_NM(Bs3TrapSystemCallHandler) wrt CGROUP16 push BS3_SEL_R0_CS16 push 3 ; DPL push X86_SEL_TYPE_SYS_286_INT_GATE push BS3_TRAP_SYSCALL BS3_CALL Bs3Trap16SetGate,6 add xSP, xCB * 6 %elif BS3_MODE_IS_32BIT_SYS(TMPL_MODE) BS3_EXTERN_CMN Bs3Trap32SetGate extern TMPL_NM(Bs3TrapSystemCallHandler) TMPL_BEGIN_TEXT push 0 ; cParams push dword TMPL_NM(Bs3TrapSystemCallHandler) wrt FLAT push BS3_SEL_R0_CS32 push 3 ; DPL push X86_SEL_TYPE_SYS_386_INT_GATE push BS3_TRAP_SYSCALL BS3_CALL Bs3Trap32SetGate,6 add xSP, xCB * 6 %elif BS3_MODE_IS_64BIT_SYS(TMPL_MODE) BS3_EXTERN_CMN Bs3Trap64SetGate extern _Bs3TrapSystemCallHandler_lm64 TMPL_BEGIN_TEXT push 0 ; bIst %if BS3_MODE_IS_64BIT_CODE(TMPL_MODE) push _Bs3TrapSystemCallHandler_lm64 wrt FLAT %else push dword 0 ; upper offset push dword _Bs3TrapSystemCallHandler_lm64 wrt FLAT %endif push BS3_SEL_R0_CS64 push 3 ; DPL push AMD64_SEL_TYPE_SYS_INT_GATE push BS3_TRAP_SYSCALL BS3_CALL Bs3Trap64SetGate,6 add xSP, xCB * 5 + 8 %else %error "TMPL_BITS" %endif %if TMPL_BITS == 16 ; Restoring ds and es after the above calls. pop es pop ds %endif ; ; Epilogue. ; %if TMPL_BITS == 64 pop r9 pop r8 pop rdx pop rcx %endif pop xAX %ifdef BS3_STRICT cmp xBP, xSP je .return_stack_ok int3 .return_stack_ok: %endif pop xBP ret BS3_PROC_END_MODE Bs3EnteredMode