VirtualBox

source: vbox/trunk/src/libs/libpng-1.6.37/scripts/options.awk@ 102315

最後變更 在這個檔案從102315是 96425,由 vboxsync 提交於 2 年 前

src/libs: Switch to libpng-1.6.37, bugref:8515 [re-export]

  • 屬性 svn:eol-style 設為 native
  • 屬性 svn:executable 設為 *
檔案大小: 30.9 KB
 
1#!/bin/awk -f
2# scripts/options.awk - library build configuration control
3#
4# last changed in libpng version 1.6.11 - June 5, 2014
5#
6# Copyright (c) 1998-2014 Glenn Randers-Pehrson
7#
8# This code is released under the libpng license.
9# For conditions of distribution and use, see the disclaimer
10# and license in png.h
11
12# The output of this script is written to the file given by
13# the variable 'out'. The script is run twice, once with
14# an intermediate output file, 'options.tmp' then again on
15# that file to produce the final output:
16#
17# awk -f scripts/options.awk out=options.tmp scripts/options.dfa 1>&2
18# awk -f scripts/options.awk out=options.dfn options.tmp 1>&2
19#
20# Some options may be specified on the command line:
21#
22# deb=1 Causes debugging to be output
23# logunsupported=1 Causes all options to be recorded in the output
24# everything=off Causes all options to be disabled by default
25# everything=on Causes all options to be enabled by default
26#
27# If awk fails on your platform, try nawk instead.
28#
29# These options may also be specified in the original input file (and
30# are copied to the preprocessed file).
31
32BEGIN{
33 out="" # intermediate, preprocessed, file
34 pre=-1 # preprocess (first line)
35 version="libpng version unknown" # version information
36 version_file="" # where to find the version
37 err=0 # in-line exit sets this
38 # The following definitions prevent the C preprocessor noticing the lines
39 # that will be in the final output file. Some C preprocessors tokenise
40 # the lines, for example by inserting spaces around operators, and all
41 # C preprocessors notice lines that start with '#', most remove comments.
42 # The technique adopted here is to make the final output lines into
43 # C strings (enclosed in double quotes), preceded by PNG_DFN. As a
44 # consequence the output cannot contain a 'raw' double quote - instead put
45 # @' in, this will be replaced by a single " afterward. See the parser
46 # script dfn.awk for more capabilities (not required here). Note that if
47 # you need a " in a 'setting' in pnglibconf.dfa it must also be @'!
48 dq="@'" # For a single double quote
49 start=" PNG_DFN \"" # Start stuff to output (can't contain a "!)
50 end="\" " # End stuff to output
51 subs="@\" " # Substitute start (substitute a C macro)
52 sube=" \"@" # Substitute end
53 comment=start "/*" # Comment start
54 cend="*/" end # Comment end
55 def=start "#define PNG_" # Arbitrary define
56 sup="_SUPPORTED" end # end supported option
57 und=comment "#undef PNG_" # Unsupported option
58 une="_SUPPORTED" cend # end unsupported option
59 error=start "ERROR:" # error message, terminate with 'end'
60
61 # Variables
62 deb=0 # debug - set on command line
63 everything="" # do not override defaults
64 logunsupported=0 # write unsupported options too
65
66 # Precreate arrays
67 # for each option:
68 option[""] = "" # list of all options: default enabled/disabled
69 done[""] = 1 # marks option as having been output
70 requires[""] = "" # requires by option
71 iffs[""] = "" # if by option
72 enabledby[""] = "" # options that enable it by option
73 sets[""] = "" # settings set by each option
74 setval[""] = "" # value to set (indexed: 'option sets[option]')
75 # for each setting:
76 setting[""] = "" # requires by setting
77 defaults[""] = "" # used for a defaulted value
78 doneset[""] = 1 # marks setting as having been output
79 r[""] = "" # Temporary array
80
81 # For decorating the output file
82 protect = ""
83}
84
85# The output file must be specified before any input:
86out == "" {
87 print "out=output.file must be given on the command line"
88 err = 1
89 exit 1
90}
91
92# The very first line indicates whether we are reading pre-processed
93# input or not, this must come *first* because 'PREPROCESSED' needs
94# to be the very first line in the temporary file.
95pre == -1{
96 if ($0 == "PREPROCESSED") {
97 pre = 0
98 next
99 } else {
100 pre = 1
101 print "PREPROCESSED" >out
102 # And fall through to continue processing
103 }
104}
105
106# While pre-processing if version is set to "search" look for a version string
107# in the following file.
108pre && version == "search" && version_file == ""{
109 version_file = FILENAME
110}
111
112pre && version == "search" && version_file != FILENAME{
113 print "version string not found in", version_file
114 err = 1
115 exit 1
116}
117
118pre && version == "search" && $0 ~ /^ \* libpng version/{
119 version = substr($0, 4)
120 print "version =", version >out
121 next
122}
123
124pre && FILENAME == version_file{
125 next
126}
127
128# variable=value
129# Sets the given variable to the given value (the syntax is fairly
130# free form, except for deb (you are expected to understand how to
131# set the debug variable...)
132#
133# This happens before the check on 'pre' below skips most of the
134# rest of the actions, so the variable settings happen during
135# preprocessing but are recorded in the END action too. This
136# allows them to be set on the command line too.
137$0 ~ /^[ ]*version[ ]*=/{
138 sub(/^[ ]*version[ ]*=[ ]*/, "")
139 version = $0
140 next
141}
142$0 ~ /^[ ]*everything[ =]*off[ ]*$/{
143 everything = "off"
144 next
145}
146$0 ~ /^[ ]*everything[ =]*on[ ]*$/{
147 everything = "on"
148 next
149}
150$0 ~ /^[ ]*logunsupported[ =]*0[ ]*$/{
151 logunsupported = 0
152 next
153}
154$0 ~ /^[ ]*logunsupported[ =]*1[ ]*$/{
155 logunsupported = 1
156 next
157}
158$1 == "deb" && $2 == "=" && NF == 3{
159 deb = $3
160 next
161}
162
163# Preprocessing - this just copies the input file with lines
164# that need preprocessing (just chunk at present) expanded
165# The bare "pre" instead of "pre != 0" crashes under Sunos awk
166pre && $1 != "chunk"{
167 print >out
168 next
169}
170
171# The first characters of the line determine how it is processed,
172# leading spaces are ignored. In general tokens that are not
173# keywords are the names of options. An option 'name' is
174# controlled by the definition of the corresponding macros:
175#
176# PNG_name_SUPPORTED The option is turned on
177# PNG_NO_name
178# PNG_NO_name_SUPPORTED If the first macro is not defined
179# either of these will turn the option off
180#
181# If none of these macros are defined the option is turned on, unless
182# the keyword 'off' is given in a line relating to the option. The
183# keyword 'on' can also be given, but it will be ignored (since it is
184# the default.)
185#
186# In the syntax below a 'name' is indicated by "NAME", other macro
187# values are indicated by "MACRO", as with "NAME" the leading "PNG_"
188# is omitted, but in this case the "NO_" prefix and the "_SUPPORTED"
189# suffix are never used.
190#
191# Each line is introduced by a keyword - the first non-space characters
192# on the line. A line starting with a '#' is a comment - it is totally
193# ignored. Keywords are as follows, a NAME, is simply a macro name
194# without the leading PNG_, PNG_NO_ or the trailing _SUPPORTED.
195
196$1 ~ /^#/ || $0 ~ /^[ ]*$/{
197 next
198}
199
200# com <comment>
201# The whole line is placed in the output file as a comment with
202# the preceding 'com' removed
203$1 == "com"{
204 if (NF > 1) {
205 # sub(/^[ ]*com[ ]*/, "")
206 $1 = ""
207 print comment $0, cend >out
208 } else
209 print start end >out
210 next
211}
212
213# version
214# Inserts a version comment
215$1 == "version" && NF == 1{
216 if (version == "") {
217 print "ERROR: no version string set"
218 err = 1 # prevent END{} running
219 exit 1
220 }
221
222 print comment, version, cend >out
223 next
224}
225
226# file output input protect
227# Informational: the official name of the input file (without
228# make generated local directories), the official name of the
229# output file and, if required, a name to use in a protection
230# macro for the contents.
231$1 == "file" && NF >= 2{
232 print comment, $2, cend >out
233 print comment, "Machine generated file: DO NOT EDIT", cend >out
234 if (NF >= 3)
235 print comment, "Derived from:", $3, cend >out
236 protect = $4
237 if (protect != "") {
238 print start "#ifndef", protect end >out
239 print start "#define", protect end >out
240 }
241 next
242}
243
244# option NAME ( (requires|enables|if) NAME* | on | off | disabled |
245# sets SETTING VALUE+ )*
246#
247# Declares an option 'NAME' and describes its default setting (disabled)
248# and its relationship to other options. The option is disabled
249# unless *all* the options listed after 'requires' are set and at
250# least one of the options listed after 'if' is set. If the
251# option is set then it turns on all the options listed after 'enables'.
252#
253# Note that "enables" takes priority over the required/if/disabled/off
254# setting of the target option.
255#
256# The definition file may list an option as 'disabled': off by default,
257# otherwise the option is enabled: on by default. A later (and it must
258# be later) entry may turn an option on or off explicitly.
259
260$1 == "option" && NF >= 2{
261 opt = $2
262 sub(/,$/,"",opt)
263 onoff = option[opt] # records current (and the default is "", enabled)
264 key = ""
265 istart = 3
266 do {
267 if (istart == 1) { # continuation line
268 val = getline
269
270 if (val != 1) { # error reading it
271 if (val == 0)
272 print "option", opt ": ERROR: missing continuation line"
273 else
274 print "option", opt ": ERROR: error reading continuation line"
275
276 # This is a hard error
277 err = 1 # prevent END{} running
278 exit 1
279 }
280 }
281
282 for (i=istart; i<=NF; ++i) {
283 val=$(i)
284 sub(/,$/,"",val)
285 if (val == "on" || val == "off" || val == "disabled" || val =="enabled") {
286 key = ""
287 if (onoff != val) {
288 # on or off can zap disabled or enabled:
289 if (onoff == "" || (onoff == "disabled" || onoff == "enabled") &&
290 (val == "on" || val == "off")) {
291 # It's easy to mis-spell the option when turning it
292 # on or off, so warn about it here:
293 if (onoff == "" && (val == "on" || val == "off")) {
294 print "option", opt ": ERROR: turning unrecognized option", val
295 # For the moment error out - it is safer
296 err = 1 # prevent END{} running
297 exit 1
298 }
299 onoff = val
300 } else {
301 # Print a message, otherwise the error
302 # below is incomprehensible
303 print "option", opt ": currently", onoff ": attempt to turn", val
304 break
305 }
306 }
307 } else if (val == "requires" || val == "if" || val == "enables" || val =="sets") {
308 key = val
309 } else if (key == "requires") {
310 requires[opt] = requires[opt] " " val
311 } else if (key == "if") {
312 iffs[opt] = iffs[opt] " " val
313 } else if (key == "enables") {
314 enabledby[val] = enabledby[val] " " opt
315 } else if (key == "sets") {
316 sets[opt] = sets[opt] " " val
317 key = "setval"
318 set = val
319 } else if (key == "setval") {
320 setval[opt " " set] = setval[opt " " set] " " val
321 } else
322 break # bad line format
323 }
324
325 istart = 1
326 } while (i > NF && $0 ~ /,$/)
327
328 if (i > NF) {
329 # Set the option, defaulting to 'enabled'
330 if (onoff == "") onoff = "enabled"
331 option[opt] = onoff
332 next
333 }
334 # Else fall through to the error handler
335}
336
337# chunk NAME [requires OPT] [enables LIST] [on|off|disabled]
338# Expands to the 'option' settings appropriate to the reading and
339# writing of an ancillary PNG chunk 'NAME':
340#
341# option READ_NAME requires READ_ANCILLARY_CHUNKS [READ_OPT]
342# option READ_NAME enables NAME LIST
343# [option READ_NAME off]
344# option WRITE_NAME requires WRITE_ANCILLARY_CHUNKS [WRITE_OPT]
345# option WRITE_NAME enables NAME LIST
346# [option WRITE_NAME off]
347
348pre != 0 && $1 == "chunk" && NF >= 2{
349 # 'chunk' is handled on the first pass by writing appropriate
350 # 'option' lines into the intermediate file.
351 opt = $2
352 sub(/,$/,"",opt)
353 onoff = ""
354 reqread = ""
355 reqwrite = ""
356 enables = ""
357 req = 0
358 istart = 3
359 do {
360 if (istart == 1) { # continuation line
361 val = getline
362
363 if (val != 1) { # error reading it
364 if (val == 0)
365 print "chunk", opt ": ERROR: missing continuation line"
366 else
367 print "chunk", opt ": ERROR: error reading continuation line"
368
369 # This is a hard error
370 err = 1 # prevent END{} running
371 exit 1
372 }
373 }
374
375 # read the keywords/additional OPTS
376 for (i=istart; i<=NF; ++i) {
377 val = $(i)
378 sub(/,$/,"",val)
379 if (val == "on" || val == "off" || val == "disabled") {
380 if (onoff != val) {
381 if (onoff == "")
382 onoff = val
383 else
384 break # on/off conflict
385 }
386 req = 0
387 } else if (val == "requires")
388 req = 1
389 else if (val == "enables")
390 req = 2
391 else if (req == 1){
392 reqread = reqread " READ_" val
393 reqwrite = reqwrite " WRITE_" val
394 } else if (req == 2)
395 enables = enables " " val
396 else
397 break # bad line: handled below
398 }
399
400 istart = 1
401 } while (i > NF && $0 ~ /,$/)
402
403 if (i > NF) {
404 # Output new 'option' lines to the intermediate file (out)
405 print "option READ_" opt, "requires READ_ANCILLARY_CHUNKS" reqread, "enables", opt enables , onoff >out
406 print "option WRITE_" opt, "requires WRITE_ANCILLARY_CHUNKS" reqwrite, "enables", opt enables, onoff >out
407 next
408 }
409 # Else hit the error handler below - bad line format!
410}
411
412# setting MACRO ( requires MACRO* )* [ default VALUE ]
413# Behaves in a similar way to 'option' without looking for NO_ or
414# _SUPPORTED; the macro is enabled if it is defined so long as all
415# the 'requires' macros are also defined. The definitions may be
416# empty, an error will be issued if the 'requires' macros are
417# *not* defined. If given the 'default' value is used if the
418# macro is not defined. The default value will be re-tokenised.
419# (BTW: this is somewhat restrictive, it mainly exists for the
420# support of non-standard configurations and numeric parameters,
421# see the uses in scripts/options.dat
422
423$1 == "setting" && (NF == 2 || NF >= 3 && ($3 == "requires" || $3 == "default")){
424 reqs = ""
425 deflt = ""
426 isdef = 0
427 key = ""
428 for (i=3; i<=NF; ++i)
429 if ($(i) == "requires" || $(i) == "default") {
430 key = $(i)
431 if (key == "default") isdef = 1
432 } else if (key == "requires")
433 reqs = reqs " " $(i)
434 else if (key == "default")
435 deflt = deflt " " $(i)
436 else
437 break # Format error, handled below
438
439 setting[$2] = reqs
440 # NOTE: this overwrites a previous value silently
441 if (isdef && deflt == "")
442 deflt = " " # as a flag to force output
443 defaults[$2] = deflt
444 next
445}
446
447# The order of the dependency lines (option, chunk, setting) is irrelevant
448# - the 'enables', 'requires' and 'if' settings will be used to determine
449# the correct order in the output and the final values in pnglibconf.h are
450# not order dependent. 'requires' and 'if' entries take precedence over
451# 'enables' from other options; if an option requires another option it
452# won't be set regardless of any options that enable it unless the other
453# option is also enabled.
454#
455# Similarly 'enables' trumps a NO_ definition in CFLAGS or pngusr.h
456#
457# For simplicity cycles in the definitions are regarded as errors,
458# even if they are not ambiguous.
459# A given NAME can be specified in as many 'option' lines as required, the
460# definitions are additive.
461
462# For backwards compatibility equivalent macros may be listed thus:
463#
464# = [NO_]NAME MACRO
465# Makes -DMACRO equivalent to -DPNG_NO_NAME or -DPNG_NAME_SUPPORTED
466# as appropriate.
467#
468# The definition is injected into the C compiler input when encountered
469# in the second pass (so all these definitions appear *after* the @
470# lines!)
471#
472# 'NAME' is as above, but 'MACRO' is the full text of the equivalent
473# old, deprecated, macro.
474
475$1 == "=" && NF == 3{
476 print "#ifdef PNG_" $3 >out
477 if ($2 ~ /^NO_/)
478 print "# define PNG_" $2 >out
479 else
480 print "# define PNG_" $2 "_SUPPORTED" >out
481 print "#endif" >out
482 next
483}
484
485# Lines may be injected into the C compiler input by preceding them
486# with an "@" character. The line is copied with just the leading
487# @ removed.
488
489$1 ~ /^@/{
490 # sub(/^[ ]*@/, "")
491 $1 = substr($1, 2)
492 print >out
493 next
494}
495
496# Check for unrecognized lines, because of the preprocessing chunk
497# format errors will be detected on the first pass independent of
498# any other format errors.
499{
500 print "options.awk: bad line (" NR "):", $0
501 err = 1 # prevent END{} running
502 exit 1
503}
504
505# For checking purposes names that start with "ok_" or "fail_" are
506# not output to pnglibconf.h and must be either enabled or disabled
507# respectively for the build to succeed. This allows interdependencies
508# between options of the form "at least one of" or "at most one of"
509# to be checked. For example:
510#
511# option FLOATING_POINT enables ok_math
512# option FIXED_POINT enables ok_math
513# This ensures that at least one of FLOATING_POINT and FIXED_POINT
514# must be set for the build to succeed.
515#
516# option fail_math requires FLOATING_POINT FIXED_POINT
517# This means the build will fail if *both* FLOATING_POINT and
518# FIXED_POINT are set (this is an example; in fact both are allowed.)
519#
520# If all these options were given the build would require exactly one
521# of the names to be enabled.
522
523END{
524 # END{} gets run on an exit (a traditional awk feature)
525 if (err) exit 1
526
527 if (pre) {
528 # Record the final value of the variables
529 print "deb =", deb >out
530 if (everything != "") {
531 print "everything =", everything >out
532 }
533 print "logunsupported =", logunsupported >out
534 exit 0
535 }
536
537 # Do the options first (allowing options to set settings). The dependency
538 # tree is thus:
539 #
540 # name > name
541 # name requires name
542 # name if name
543 # name enabledby name
544 #
545 # First build a list 'tree' by option of all the things on which
546 # it depends.
547 print "" >out
548 print "/* OPTIONS */" >out
549 print comment, "options", cend >out
550 for (opt in enabledby) tree[opt] = 1 # may not be explicit options
551 for (opt in option) if (opt != "") {
552 o = option[opt]
553 # option should always be one of the following values
554 if (o != "on" && o != "off" && o != "disabled" && o != "enabled") {
555 print "internal option error (" o ")"
556 exit 1
557 }
558 tree[opt] = "" # so unlisted options marked
559 }
560 for (opt in tree) if (opt != "") {
561 if (tree[opt] == 1) {
562 tree[opt] = ""
563 if (option[opt] != "") {
564 print "internal error (1)"
565 exit 1
566 }
567 # Macros only listed in 'enables' remain off unless
568 # one of the enabling macros is on.
569 option[opt] = "disabled"
570 }
571
572 split("", list) # clear 'list'
573 # Now add every requires, iffs or enabledby entry to 'list'
574 # so that we can add a unique list of requirements to tree[i]
575 split(requires[opt] iffs[opt] enabledby[opt], r)
576 for (i in r) list[r[i]] = 1
577 for (i in list) tree[opt] = tree[opt] " " i
578 }
579
580 # print the tree for extreme debugging
581 if (deb > 2) for (i in tree) if (i != "") print i, "depends-on" tree[i]
582
583 # Ok, now check all options marked explicitly 'on' or 'off':
584 #
585 # If an option[opt] is 'on' then turn on all requires[opt]
586 # If an option[opt] is 'off' then turn off all enabledby[opt]
587 #
588 # Error out if we have to turn 'on' to an 'off' option or vice versa.
589 npending = 0
590 for (opt in option) if (opt != "") {
591 if (option[opt] == "on" || option[opt] == "off") {
592 pending[++npending] = opt
593 }
594 }
595
596 err = 0 # set on error
597 while (npending > 0) {
598 opt = pending[npending--]
599 if (option[opt] == "on") {
600 nreqs = split(requires[opt], r)
601 for (j=1; j<=nreqs; ++j) {
602 if (option[r[j]] == "off") {
603 print "option", opt, "turned on, but requirement", r[j], "is turned off"
604 err = 1
605 } else if (option[r[j]] != "on") {
606 option[r[j]] = "on"
607 pending[++npending] = r[j]
608 }
609 }
610 } else {
611 if (option[opt] != "off") {
612 print "internal error (2)"
613 exit 1
614 }
615 nreqs = split(enabledby[opt], r)
616 for (j=1; j<=nreqs; ++j) {
617 if (option[r[j]] == "on") {
618 print "option", opt, "turned off, but enabled by", r[j], "which is turned on"
619 err = 1
620 } else if (option[r[j]] != "off") {
621 option[r[j]] = "off"
622 pending[++npending] = r[j]
623 }
624 }
625 }
626 }
627 if (err) exit 1
628
629 # Sort options:
630 print "PNG_DFN_START_SORT 2" >out
631
632 # option[i] is now the complete list of all the tokens we may
633 # need to output, go through it as above, depth first.
634 finished = 0
635 while (!finished) {
636 finished = 1
637 movement = 0 # done nothing
638 for (i in option) if (!done[i]) {
639 nreqs = split(tree[i], r)
640 if (nreqs > 0) {
641 for (j=1; j<=nreqs; ++j) if (!done[r[j]]) {
642 break
643 }
644 if (j<=nreqs) {
645 finished = 0
646 continue # next option
647 }
648 }
649
650 # All the requirements have been processed, output
651 # this option. An option is _SUPPORTED if:
652 #
653 # all 'requires' are _SUPPORTED AND
654 # at least one of the 'if' options are _SUPPORTED AND
655 # EITHER:
656 # The name is _SUPPORTED (on the command line)
657 # OR:
658 # an 'enabledby' is _SUPPORTED
659 # OR:
660 # NO_name is not defined AND
661 # the option is not disabled; an option is disabled if:
662 # option == off
663 # option == disabled && everything != on
664 # option == "" && everything == off
665 if (deb) print "option", i
666 print "" >out
667 print "/* option:", i, option[i] >out
668 print " * requires: " requires[i] >out
669 print " * if: " iffs[i] >out
670 print " * enabled-by:" enabledby[i] >out
671 print " * sets: " sets[i], "*/" >out
672 print "#undef PNG_on" >out
673 print "#define PNG_on 1" >out
674
675 # requires
676 nreqs = split(requires[i], r)
677 for (j=1; j<=nreqs; ++j) {
678 print "#ifndef PNG_" r[j] "_SUPPORTED" >out
679 print "# undef PNG_on /*!" r[j] "*/" >out
680 # This error appears in the final output if something
681 # was switched 'on' but the processing above to force
682 # the requires did not work
683 if (option[i] == "on") {
684 print error, i, "requires", r[j] end >out
685 }
686 print "#endif" >out
687 }
688
689 # if
690 have_ifs = 0
691 nreqs = split(iffs[i], r)
692 print "#undef PNG_no_if" >out
693 if (nreqs > 0) {
694 have_ifs = 1
695 print "/* if" iffs[i], "*/" >out
696 print "#define PNG_no_if 1" >out
697 for (j=1; j<=nreqs; ++j) {
698 print "#ifdef PNG_" r[j] "_SUPPORTED" >out
699 print "# undef PNG_no_if /*" r[j] "*/" >out
700 print "#endif" >out
701 }
702 print "#ifdef PNG_no_if /*missing if*/" >out
703 print "# undef PNG_on" >out
704 # There is no checking above for this, because we
705 # don't know which 'if' to choose, so whine about
706 # it here:
707 if (option[i] == "on") {
708 print error, i, "needs one of:", iffs[i] end >out
709 }
710 print "#endif" >out
711 }
712
713 print "#ifdef PNG_on /*requires, if*/" >out
714 # enables
715 print "# undef PNG_not_enabled" >out
716 print "# define PNG_not_enabled 1" >out
717 print " /* enabled by" enabledby[i], "*/" >out
718 nreqs = split(enabledby[i], r)
719 for (j=1; j<=nreqs; ++j) {
720 print "#ifdef PNG_" r[j] "_SUPPORTED" >out
721 print "# undef PNG_not_enabled /*" r[j] "*/" >out
722 # Oops, probably not intended (should be factored
723 # out by the checks above).
724 if (option[i] == "off") {
725 print error, i, "enabled by:", r[j] end >out
726 }
727 print "#endif" >out
728 }
729
730 print "# ifndef PNG_" i "_SUPPORTED /*!command line*/" >out
731 print "# ifdef PNG_not_enabled /*!enabled*/" >out
732 # 'have_ifs' here means that everything = "off" still allows an 'if' on
733 # an otherwise enabled option to turn it on; otherwise the 'if'
734 # handling is effectively disabled by 'everything = off'
735 if (option[i] == "off" || option[i] == "disabled" && everything != "on" || option[i] == "enabled" && everything == "off" && !have_ifs) {
736 print "# undef PNG_on /*default off*/" >out
737 } else {
738 print "# ifdef PNG_NO_" i >out
739 print "# undef PNG_on /*turned off*/" >out
740 print "# endif" >out
741 print "# ifdef PNG_NO_" i "_SUPPORTED" >out
742 print "# undef PNG_on /*turned off*/" >out
743 print "# endif" >out
744 }
745 print "# endif /*!enabled*/" >out
746 print "# ifdef PNG_on" >out
747 # The _SUPPORTED macro must be defined so that dependent
748 # options output later work.
749 print "# define PNG_" i "_SUPPORTED" >out
750 print "# endif" >out
751 print "# endif /*!command line*/" >out
752 # If PNG_on is still set the option should be defined in
753 # pnglibconf.h
754 print "# ifdef PNG_on" >out
755 if (i ~ /^fail_/) {
756 print error, i, "is on: enabled by:" iffs[i] enabledby[i] ", requires" requires[i] end >out
757 } else if (i !~ /^ok_/) {
758 print def i sup >out
759 # Supported option, set required settings
760 nreqs = split(sets[i], r)
761 for (j=1; j<=nreqs; ++j) {
762 print "# ifdef PNG_set_" r[j] >out
763 # Some other option has already set a value:
764 print error, i, "sets", r[j] ": duplicate setting" end >out
765 print error, " previous value: " end "PNG_set_" r[j] >out
766 print "# else" >out
767 # Else set the default: note that this won't accept arbitrary
768 # values, the setval string must be acceptable to all the C
769 # compilers we use. That means it must be VERY simple; a number,
770 # a name or a string.
771 print "# define PNG_set_" r[j], setval[i " " r[j]] >out
772 print "# endif" >out
773 }
774 }
775 print "# endif /* definition */" >out
776 print "#endif /*requires, if*/" >out
777 if (logunsupported || i ~ /^ok_/) {
778 print "#ifndef PNG_on" >out
779 if (logunsupported) {
780 print und i une >out
781 }
782 if (i ~ /^ok_/) {
783 print error, i, "not enabled: requires:" requires[i] ", enabled by:" iffs[i] enabledby[i] end >out
784 }
785 print "#endif" >out
786 }
787
788 done[i] = 1
789 ++movement
790 }
791
792 if (!finished && !movement) {
793 print "option: loop or missing option in dependency tree, cannot process:"
794 for (i in option) if (!done[i]) {
795 print " option", i, "depends on" tree[i], "needs:"
796 nreqs = split(tree[i], r)
797 if (nreqs > 0) for (j=1; j<=nreqs; ++j) if (!done[r[j]]) {
798 print " " r[j]
799 }
800 }
801 exit 1
802 }
803 }
804 print "PNG_DFN_END_SORT" >out
805 print comment, "end of options", cend >out
806
807 # Do the 'setting' values second, the algorithm the standard
808 # tree walk (O(1)) done in an O(2) while/for loop; iterations
809 # settings x depth, outputting the deepest required macros
810 # first.
811 print "" >out
812 print "/* SETTINGS */" >out
813 print comment, "settings", cend >out
814 # Sort (in dfn.awk) on field 2, the setting name
815 print "PNG_DFN_START_SORT 2" >out
816 finished = 0
817 while (!finished) {
818 finished = 1
819 movement = 0 # done nothing
820 for (i in setting) if (!doneset[i]) {
821 nreqs = split(setting[i], r)
822 if (nreqs > 0) {
823 # By default assume the requires values are options, but if there
824 # is no option with that name check for a setting
825 for (j=1; j<=nreqs; ++j) if (option[r[j]] == "" && !doneset[r[j]]) {
826 break
827 }
828 if (j<=nreqs) {
829 finished = 0
830 continue # try a different setting
831 }
832 }
833
834 # All the requirements have been processed, output
835 # this setting.
836 if (deb) print "setting", i
837 deflt = defaults[i]
838 # Remove any spurious trailing spaces
839 sub(/ *$/,"",deflt)
840 # A leading @ means leave it unquoted so the preprocessor
841 # can substitute the build time value
842 if (deflt ~ /^ @/)
843 deflt = " " subs substr(deflt, 3) sube
844 print "" >out
845 print "/* setting: ", i >out
846 print " * requires:" setting[i] >out
847 print " * default: ", defaults[i] deflt, "*/" >out
848 for (j=1; j<=nreqs; ++j) {
849 if (option[r[j]] != "")
850 print "#ifndef PNG_" r[j] "_SUPPORTED" >out
851 else
852 print "#ifndef PNG_" r[j] >out
853 print error, i, "requires", r[j] end >out
854 print "# endif" >out
855 }
856 # The precedence is:
857 #
858 # 1) External definition; trumps:
859 # 2) Option 'sets' value; trumps:
860 # 3) Setting 'default'
861 #
862 print "#ifdef PNG_" i >out
863 # PNG_<i> is defined, so substitute the value:
864 print def i, subs "PNG_" i sube end >out
865 print "#else /* use default */" >out
866 print "# ifdef PNG_set_" i >out
867 # Value from an option 'sets' argument
868 print def i, subs "PNG_set_" i sube end >out
869 # This is so that subsequent tests on the setting work:
870 print "# define PNG_" i, "1" >out
871 if (defaults[i] != "") {
872 print "# else /*default*/" >out
873 print def i deflt end >out
874 print "# define PNG_" i, "1" >out
875 }
876 print "# endif /* defaults */" >out
877 print "#endif /* setting", i, "*/" >out
878
879 doneset[i] = 1
880 ++movement
881 }
882
883 if (!finished && !movement) {
884 print "setting: loop or missing setting in 'requires', cannot process:"
885 for (i in setting) if (!doneset[i]) {
886 print " setting", i, "requires" setting[i]
887 }
888 exit 1
889 }
890 }
891 print "PNG_DFN_END_SORT" >out
892 print comment, "end of settings", cend >out
893
894 # Regular end - everything looks ok
895 if (protect != "") {
896 print start "#endif", "/*", protect, "*/" end >out
897 }
898}
注意: 瀏覽 TracBrowser 來幫助您使用儲存庫瀏覽器

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette