plevent.c@ 44770

最後變更在這個檔案從44770是 33044,由 vboxsync 提交於 14 年前

iprt/process: eliminate RTPROC_FLAGS_DAEMONIZE_DEPRECATED, rework starting a detached process on posix platforms and eliminate one useless fork(), avoid running

atexit functions in the temporary process

XPCOM: more detached process rework, block anything not going through IPRT, clos
e a few file descriptor inheritance leaks, and clean up the file descriptor pass
ing to VBoxXPCOMIPCD

屬性 svn:eol-style 設為 native
屬性 svn:keywords 設為 Author Date Id Revision

檔案大小: 49.8 KB

行
1	/* -- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -- */
2	/* *** BEGIN LICENSE BLOCK ***
3	* Version: MPL 1.1/GPL 2.0/LGPL 2.1
4	*
5	* The contents of this file are subject to the Mozilla Public License Version
6	* 1.1 (the "License"); you may not use this file except in compliance with
7	* the License. You may obtain a copy of the License at
8	* http://www.mozilla.org/MPL/
9	*
10	* Software distributed under the License is distributed on an "AS IS" basis,
11	* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
12	* for the specific language governing rights and limitations under the
13	* License.
14	*
15	* The Original Code is mozilla.org Code.
16	*
17	* The Initial Developer of the Original Code is
18	* Netscape Communications Corporation.
19	* Portions created by the Initial Developer are Copyright (C) 1998
20	* the Initial Developer. All Rights Reserved.
21	*
22	* Contributor(s):
23	*
24	* Alternatively, the contents of this file may be used under the terms of
25	* either of the GNU General Public License Version 2 or later (the "GPL"),
26	* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27	* in which case the provisions of the GPL or the LGPL are applicable instead
28	* of those above. If you wish to allow use of your version of this file only
29	* under the terms of either the GPL or the LGPL, and not to allow others to
30	* use your version of this file under the terms of the MPL, indicate your
31	* decision by deleting the provisions above and replace them with the notice
32	* and other provisions required by the GPL or the LGPL. If you do not delete
33	* the provisions above, a recipient may use your version of this file under
34	* the terms of any one of the MPL, the GPL or the LGPL.
35	*
36	* *** END LICENSE BLOCK *** */
37
38	#if defined(_WIN32)
39	#include <windows.h>
40	#endif
41
42	#if defined(XP_OS2)
43	#define INCL_DOS
44	#define INCL_DOSERRORS
45	#define INCL_WIN
46	#include <os2.h>
47	#define DefWindowProc WinDefWindowProc
48	#endif /* XP_OS2 */
49
50	#include "nspr.h"
51	#include "plevent.h"
52
53	#if !defined(WIN32)
54	#include <errno.h>
55	#include <stddef.h>
56	#if !defined(XP_OS2)
57	#include <unistd.h>
58	#endif /* !XP_OS2 */
59	#endif /* !Win32 */
60
61	#if defined(XP_UNIX)
62	/* for fcntl */
63	#include <sys/types.h>
64	#include <fcntl.h>
65	#endif
66
67	#if defined(XP_BEOS)
68	#include <kernel/OS.h>
69	#endif
70
71	#if defined(XP_MACOSX)
72	#if defined(MOZ_WIDGET_COCOA)
73	#include <CoreFoundation/CoreFoundation.h>
74	#define MAC_USE_CFRUNLOOPSOURCE
75	#elif defined(TARGET_CARBON)
76	/* #include <CarbonEvents.h> */
77	/* #define MAC_USE_CARBON_EVENT */
78	#include <CoreFoundation/CoreFoundation.h>
79	#define MAC_USE_CFRUNLOOPSOURCE
80	#endif
81	#endif
82
83	#include "private/pprthred.h"
84
85	#if defined(VMS)
86	/*
87	** On OpenVMS, XtAppAddInput doesn't want a regular fd, instead it
88	** wants an event flag. So, we don't create and use a pipe for
89	** notification of when an event queue has something ready, instead
90	** we use an event flag. Shouldn't be a problem if we only have
91	** a few event queues.
92	*/
93	#include <lib$routines.h>
94	#include <starlet.h>
95	#include <stsdef.h>
96	#endif /* VMS */
97
98	#if defined(_WIN32)
99	/* Comment out the following USE_TIMER define to prevent
100	* WIN32 from using a WIN32 native timer for PLEvent notification.
101	* With USE_TIMER defined we will use a timer when pending input
102	* or paint events are starved, otherwise it will use a posted
103	* WM_APP msg for PLEvent notification.
104	*/
105	#define USE_TIMER
106
107	/* Threshold defined in milliseconds for determining when the input
108	* and paint events have been held in the WIN32 msg queue too long
109	*/
110	#define INPUT_STARVATION_LIMIT 50
111	/* The paint starvation limit is set to the smallest value which
112	* does not cause performance degradation while running page load tests
113	*/
114	#define PAINT_STARVATION_LIMIT 750
115	/* The WIN9X paint starvation limit is larger because it was
116	* determined that the following value was required to prevent performance
117	* degradation on page load tests for WIN98/95 only.
118	*/
119	#define WIN9X_PAINT_STARVATION_LIMIT 3000
120
121	#define TIMER_ID 0
122	/* If _md_PerformanceSetting <=0 then no event starvation otherwise events will be starved */
123	static PRInt32 _md_PerformanceSetting = 0;
124	static PRUint32 _md_StarvationDelay = 0;
125	static PRUint32 _md_SwitchTime = 0;
126	#endif
127
128	static PRLogModuleInfo *event_lm = NULL;
129
130	/*******************************************************************************
131	* Private Stuff
132	******************************************************************************/
133
134	/*
135	** EventQueueType -- Defines notification type for an event queue
136	**
137	*/
138	typedef enum {
139	EventQueueIsNative = 1,
140	EventQueueIsMonitored = 2
141	} EventQueueType;
142
143
144	struct PLEventQueue {
145	const char* name;
146	PRCList queue;
147	PRMonitor* monitor;
148	PRThread* handlerThread;
149	EventQueueType type;
150	PRPackedBool processingEvents;
151	PRPackedBool notified;
152	#if defined(_WIN32)
153	PRPackedBool timerSet;
154	#endif
155
156	#if defined(XP_UNIX) && !defined(XP_MACOSX)
157	#if defined(VMS)
158	int efn;
159	#else
160	PRInt32 eventPipe[2];
161	#endif
162	PLGetEventIDFunc idFunc;
163	void* idFuncClosure;
164	#elif defined(_WIN32) \|\| defined(XP_OS2)
165	HWND eventReceiverWindow;
166	PRBool removeMsg;
167	#elif defined(XP_BEOS)
168	port_id eventport;
169	#elif defined(XP_MACOSX)
170	#if defined(MAC_USE_CFRUNLOOPSOURCE)
171	CFRunLoopSourceRef mRunLoopSource;
172	CFRunLoopRef mMainRunLoop;
173	CFStringRef mRunLoopModeStr; /* vbox */
174	#elif defined(MAC_USE_CARBON_EVENT)
175	EventHandlerUPP eventHandlerUPP;
176	EventHandlerRef eventHandlerRef;
177	#endif
178	#endif
179	};
180
181	#define PR_EVENT_PTR(_qp) \
182	((PLEvent) ((char) (_qp) - offsetof(PLEvent, link)))
183
184	static PRStatus _pl_SetupNativeNotifier(PLEventQueue* self);
185	static void _pl_CleanupNativeNotifier(PLEventQueue* self);
186	static PRStatus _pl_NativeNotify(PLEventQueue* self);
187	static PRStatus _pl_AcknowledgeNativeNotify(PLEventQueue* self);
188	static void _md_CreateEventQueue( PLEventQueue *eventQueue );
189	static PRInt32 _pl_GetEventCount(PLEventQueue* self);
190
191
192	#if defined(_WIN32) \|\| defined(XP_OS2)
193	#if defined(XP_OS2)
194	ULONG _pr_PostEventMsgId;
195	#else
196	UINT _pr_PostEventMsgId;
197	#endif /* OS2 */
198	static char *_pr_eventWindowClass = "XPCOM:EventWindow";
199	#endif /* Win32, OS2 */
200
201	#if defined(_WIN32)
202
203	static LPCTSTR _md_GetEventQueuePropName() {
204	static ATOM atom = 0;
205	if (!atom) {
206	atom = GlobalAddAtom("XPCOM_EventQueue");
207	}
208	return MAKEINTATOM(atom);
209	}
210	#endif
211
212	#if defined(MAC_USE_CARBON_EVENT)
213	enum {
214	kEventClassPL = FOUR_CHAR_CODE('PLEC'),
215
216	kEventProcessPLEvents = 1,
217
218	kEventParamPLEventQueue = FOUR_CHAR_CODE('OWNQ')
219	};
220
221	static pascal Boolean _md_CarbonEventComparator(EventRef inEvent, void *inCompareData);
222	#endif
223
224	/*******************************************************************************
225	* Event Queue Operations
226	******************************************************************************/
227
228	/*
229	** _pl_CreateEventQueue() -- Create the event queue
230	**
231	**
232	*/
233	static PLEventQueue * _pl_CreateEventQueue(const char *name,
234	PRThread *handlerThread,
235	EventQueueType qtype)
236	{
237	PRStatus err;
238	PLEventQueue* self = NULL;
239	PRMonitor* mon = NULL;
240
241	if (event_lm == NULL)
242	event_lm = PR_NewLogModule("event");
243
244	self = PR_NEWZAP(PLEventQueue);
245	if (self == NULL) return NULL;
246
247	mon = PR_NewNamedMonitor(name);
248	if (mon == NULL) goto error;
249
250	self->name = name;
251	self->monitor = mon;
252	self->handlerThread = handlerThread;
253	self->processingEvents = PR_FALSE;
254	self->type = qtype;
255	#if defined(_WIN32)
256	self->timerSet = PR_FALSE;
257	#endif
258	#if defined(_WIN32) \|\| defined(XP_OS2)
259	self->removeMsg = PR_TRUE;
260	#endif
261
262	self->notified = PR_FALSE;
263
264	PR_INIT_CLIST(&self->queue);
265	if ( qtype == EventQueueIsNative ) {
266	err = _pl_SetupNativeNotifier(self);
267	if (err) goto error;
268	_md_CreateEventQueue( self );
269	}
270	return self;
271
272	error:
273	if (mon != NULL)
274	PR_DestroyMonitor(mon);
275	PR_DELETE(self);
276	return NULL;
277	}
278
279	PR_IMPLEMENT(PLEventQueue*)
280	PL_CreateEventQueue(const char* name, PRThread* handlerThread)
281	{
282	return( _pl_CreateEventQueue( name, handlerThread, EventQueueIsNative ));
283	}
284
285	PR_EXTERN(PLEventQueue *)
286	PL_CreateNativeEventQueue(const char name, PRThread handlerThread)
287	{
288	return( _pl_CreateEventQueue( name, handlerThread, EventQueueIsNative ));
289	}
290
291	PR_EXTERN(PLEventQueue *)
292	PL_CreateMonitoredEventQueue(const char name, PRThread handlerThread)
293	{
294	return( _pl_CreateEventQueue( name, handlerThread, EventQueueIsMonitored ));
295	}
296
297	PR_IMPLEMENT(PRMonitor*)
298	PL_GetEventQueueMonitor(PLEventQueue* self)
299	{
300	return self->monitor;
301	}
302
303	static void PR_CALLBACK
304	_pl_destroyEvent(PLEvent* event, void* data, PLEventQueue* queue)
305	{
306	PL_DequeueEvent(event, queue);
307	PL_DestroyEvent(event);
308	}
309
310	PR_IMPLEMENT(void)
311	PL_DestroyEventQueue(PLEventQueue* self)
312	{
313	PR_EnterMonitor(self->monitor);
314
315	/* destroy undelivered events */
316	PL_MapEvents(self, _pl_destroyEvent, NULL);
317
318	if ( self->type == EventQueueIsNative )
319	_pl_CleanupNativeNotifier(self);
320
321	/* destroying the monitor also destroys the name */
322	PR_ExitMonitor(self->monitor);
323	PR_DestroyMonitor(self->monitor);
324	PR_DELETE(self);
325
326	}
327
328	PR_IMPLEMENT(PRStatus)
329	PL_PostEvent(PLEventQueue* self, PLEvent* event)
330	{
331	PRStatus err = PR_SUCCESS;
332	PRMonitor* mon;
333
334	if (self == NULL)
335	return PR_FAILURE;
336
337	mon = self->monitor;
338	PR_EnterMonitor(mon);
339
340	#if defined(XP_UNIX) && !defined(XP_MACOSX)
341	if (self->idFunc && event)
342	event->id = self->idFunc(self->idFuncClosure);
343	#endif
344
345	/* insert event into thread's event queue: */
346	if (event != NULL) {
347	PR_APPEND_LINK(&event->link, &self->queue);
348	}
349
350	if (self->type == EventQueueIsNative && !self->notified) {
351	err = _pl_NativeNotify(self);
352
353	if (err != PR_SUCCESS)
354	goto error;
355
356	self->notified = PR_TRUE;
357	}
358
359	/*
360	* This may fall on deaf ears if we're really notifying the native
361	* thread, and no one has called PL_WaitForEvent (or PL_EventLoop):
362	*/
363	err = PR_Notify(mon);
364
365	error:
366	PR_ExitMonitor(mon);
367	return err;
368	}
369
370	PR_IMPLEMENT(void*)
371	PL_PostSynchronousEvent(PLEventQueue* self, PLEvent* event)
372	{
373	void* result;
374
375	if (self == NULL)
376	return NULL;
377
378	PR_ASSERT(event != NULL);
379
380	if (PR_GetCurrentThread() == self->handlerThread) {
381	/* Handle the case where the thread requesting the event handling
382	* is also the thread that's supposed to do the handling. */
383	result = event->handler(event);
384	}
385	else {
386	int i, entryCount;
387
388	event->lock = PR_NewLock();
389	if (!event->lock) {
390	return NULL;
391	}
392	event->condVar = PR_NewCondVar(event->lock);
393	if(!event->condVar) {
394	PR_DestroyLock(event->lock);
395	event->lock = NULL;
396	return NULL;
397	}
398
399	PR_Lock(event->lock);
400
401	entryCount = PR_GetMonitorEntryCount(self->monitor);
402
403	event->synchronousResult = (void*)PR_TRUE;
404
405	PL_PostEvent(self, event);
406
407	/* We need temporarily to give up our event queue monitor if
408	we're holding it, otherwise, the thread we're going to wait
409	for notification from won't be able to enter it to process
410	the event. */
411	if (entryCount) {
412	for (i = 0; i < entryCount; i++)
413	PR_ExitMonitor(self->monitor);
414	}
415
416	event->handled = PR_FALSE;
417
418	while (!event->handled) {
419	/* wait for event to be handled or destroyed */
420	PR_WaitCondVar(event->condVar, PR_INTERVAL_NO_TIMEOUT);
421	}
422
423	if (entryCount) {
424	for (i = 0; i < entryCount; i++)
425	PR_EnterMonitor(self->monitor);
426	}
427
428	result = event->synchronousResult;
429	event->synchronousResult = NULL;
430	PR_Unlock(event->lock);
431	}
432
433	/* For synchronous events, they're destroyed here on the caller's
434	thread before the result is returned. See PL_HandleEvent. */
435	PL_DestroyEvent(event);
436
437	return result;
438	}
439
440	PR_IMPLEMENT(PLEvent*)
441	PL_GetEvent(PLEventQueue* self)
442	{
443	PLEvent* event = NULL;
444	PRStatus err = PR_SUCCESS;
445
446	if (self == NULL)
447	return NULL;
448
449	PR_EnterMonitor(self->monitor);
450
451	if (!PR_CLIST_IS_EMPTY(&self->queue)) {
452	if ( self->type == EventQueueIsNative &&
453	self->notified &&
454	!self->processingEvents &&
455	0 == _pl_GetEventCount(self) )
456	{
457	err = _pl_AcknowledgeNativeNotify(self);
458	self->notified = PR_FALSE;
459	}
460	if (err)
461	goto done;
462
463	/* then grab the event and return it: */
464	event = PR_EVENT_PTR(self->queue.next);
465	PR_REMOVE_AND_INIT_LINK(&event->link);
466	}
467
468	done:
469	PR_ExitMonitor(self->monitor);
470	return event;
471	}
472
473	PR_IMPLEMENT(PRBool)
474	PL_EventAvailable(PLEventQueue* self)
475	{
476	PRBool result = PR_FALSE;
477
478	if (self == NULL)
479	return PR_FALSE;
480
481	PR_EnterMonitor(self->monitor);
482
483	if (!PR_CLIST_IS_EMPTY(&self->queue))
484	result = PR_TRUE;
485
486	PR_ExitMonitor(self->monitor);
487	return result;
488	}
489
490	PR_IMPLEMENT(void)
491	PL_MapEvents(PLEventQueue* self, PLEventFunProc fun, void* data)
492	{
493	PRCList* qp;
494
495	if (self == NULL)
496	return;
497
498	PR_EnterMonitor(self->monitor);
499	qp = self->queue.next;
500	while (qp != &self->queue) {
501	PLEvent* event = PR_EVENT_PTR(qp);
502	qp = qp->next;
503	(*fun)(event, data, self);
504	}
505	PR_ExitMonitor(self->monitor);
506	}
507
508	static void PR_CALLBACK
509	_pl_DestroyEventForOwner(PLEvent* event, void* owner, PLEventQueue* queue)
510	{
511	PR_ASSERT(PR_GetMonitorEntryCount(queue->monitor) > 0);
512	if (event->owner == owner) {
513	PR_LOG(event_lm, PR_LOG_DEBUG,
514	("$$$ \tdestroying event %0x for owner %0x", event, owner));
515	PL_DequeueEvent(event, queue);
516
517	if (event->synchronousResult == (void*)PR_TRUE) {
518	PR_Lock(event->lock);
519	event->synchronousResult = NULL;
520	event->handled = PR_TRUE;
521	PR_NotifyCondVar(event->condVar);
522	PR_Unlock(event->lock);
523	}
524	else {
525	PL_DestroyEvent(event);
526	}
527	}
528	else {
529	PR_LOG(event_lm, PR_LOG_DEBUG,
530	("$$$ \tskipping event %0x for owner %0x", event, owner));
531	}
532	}
533
534	PR_IMPLEMENT(void)
535	PL_RevokeEvents(PLEventQueue* self, void* owner)
536	{
537	if (self == NULL)
538	return;
539
540	PR_LOG(event_lm, PR_LOG_DEBUG,
541	("$$$ revoking events for owner %0x", owner));
542
543	/*
544	** First we enter the monitor so that no one else can post any events
545	** to the queue:
546	*/
547	PR_EnterMonitor(self->monitor);
548	PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ owner %0x, entered monitor", owner));
549
550	/*
551	** Discard any pending events for this owner:
552	*/
553	PL_MapEvents(self, _pl_DestroyEventForOwner, owner);
554
555	#ifdef DEBUG
556	{
557	PRCList* qp = self->queue.next;
558	while (qp != &self->queue) {
559	PLEvent* event = PR_EVENT_PTR(qp);
560	qp = qp->next;
561	PR_ASSERT(event->owner != owner);
562	}
563	}
564	#endif /* DEBUG */
565
566	PR_ExitMonitor(self->monitor);
567
568	PR_LOG(event_lm, PR_LOG_DEBUG,
569	("$$$ revoking events for owner %0x", owner));
570	}
571
572	static PRInt32
573	_pl_GetEventCount(PLEventQueue* self)
574	{
575	PRCList* node;
576	PRInt32 count = 0;
577
578	PR_EnterMonitor(self->monitor);
579	node = PR_LIST_HEAD(&self->queue);
580	while (node != &self->queue) {
581	count++;
582	node = PR_NEXT_LINK(node);
583	}
584	PR_ExitMonitor(self->monitor);
585
586	return count;
587	}
588
589	PR_IMPLEMENT(void)
590	PL_ProcessPendingEvents(PLEventQueue* self)
591	{
592	PRInt32 count;
593
594	if (self == NULL)
595	return;
596
597
598	PR_EnterMonitor(self->monitor);
599
600	if (self->processingEvents) {
601	_pl_AcknowledgeNativeNotify(self);
602	self->notified = PR_FALSE;
603	PR_ExitMonitor(self->monitor);
604	return;
605	}
606	self->processingEvents = PR_TRUE;
607
608	/* Only process the events that are already in the queue, and
609	* not any new events that get added. Do this by counting the
610	* number of events currently in the queue
611	*/
612	count = _pl_GetEventCount(self);
613	PR_ExitMonitor(self->monitor);
614
615	while (count-- > 0) {
616	PLEvent* event = PL_GetEvent(self);
617	if (event == NULL)
618	break;
619
620	PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ processing event"));
621	PL_HandleEvent(event);
622	PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ done processing event"));
623	}
624
625	PR_EnterMonitor(self->monitor);
626
627	if (self->type == EventQueueIsNative) {
628	count = _pl_GetEventCount(self);
629
630	if (count <= 0) {
631	_pl_AcknowledgeNativeNotify(self);
632	self->notified = PR_FALSE;
633	}
634	else {
635	_pl_NativeNotify(self);
636	self->notified = PR_TRUE;
637	}
638
639	}
640	self->processingEvents = PR_FALSE;
641
642	PR_ExitMonitor(self->monitor);
643	}
644
645	/*******************************************************************************
646	* Event Operations
647	******************************************************************************/
648
649	PR_IMPLEMENT(void)
650	PL_InitEvent(PLEvent* self, void* owner,
651	PLHandleEventProc handler,
652	PLDestroyEventProc destructor)
653	{
654	#ifdef PL_POST_TIMINGS
655	self->postTime = PR_IntervalNow();
656	#endif
657	PR_INIT_CLIST(&self->link);
658	self->handler = handler;
659	self->destructor = destructor;
660	self->owner = owner;
661	self->synchronousResult = NULL;
662	self->handled = PR_FALSE;
663	self->lock = NULL;
664	self->condVar = NULL;
665	#if defined(XP_UNIX) && !defined(XP_MACOSX)
666	self->id = 0;
667	#endif
668	}
669
670	PR_IMPLEMENT(void*)
671	PL_GetEventOwner(PLEvent* self)
672	{
673	return self->owner;
674	}
675
676	PR_IMPLEMENT(void)
677	PL_HandleEvent(PLEvent* self)
678	{
679	void* result;
680	if (self == NULL)
681	return;
682
683	/* This event better not be on an event queue anymore. */
684	PR_ASSERT(PR_CLIST_IS_EMPTY(&self->link));
685
686	result = self->handler(self);
687	if (NULL != self->synchronousResult) {
688	PR_Lock(self->lock);
689	self->synchronousResult = result;
690	self->handled = PR_TRUE;
691	PR_NotifyCondVar(self->condVar);
692	PR_Unlock(self->lock);
693	}
694	else {
695	/* For asynchronous events, they're destroyed by the event-handler
696	thread. See PR_PostSynchronousEvent. */
697	PL_DestroyEvent(self);
698	}
699	}
700	#ifdef PL_POST_TIMINGS
701	static long s_eventCount = 0;
702	static long s_totalTime = 0;
703	#endif
704
705	PR_IMPLEMENT(void)
706	PL_DestroyEvent(PLEvent* self)
707	{
708	if (self == NULL)
709	return;
710
711	/* This event better not be on an event queue anymore. */
712	PR_ASSERT(PR_CLIST_IS_EMPTY(&self->link));
713
714	if(self->condVar)
715	PR_DestroyCondVar(self->condVar);
716	if(self->lock)
717	PR_DestroyLock(self->lock);
718
719	#ifdef PL_POST_TIMINGS
720	s_totalTime += PR_IntervalNow() - self->postTime;
721	s_eventCount++;
722	printf("$$$ running avg (%d) \n", PR_IntervalToMilliseconds(s_totalTime/s_eventCount));
723	#endif
724
725	self->destructor(self);
726	}
727
728	PR_IMPLEMENT(void)
729	PL_DequeueEvent(PLEvent* self, PLEventQueue* queue)
730	{
731	if (self == NULL)
732	return;
733
734	/* Only the owner is allowed to dequeue events because once the
735	client has put it in the queue, they have no idea whether it's
736	been processed and destroyed or not. */
737
738	PR_ASSERT(queue->handlerThread == PR_GetCurrentThread());
739
740	PR_EnterMonitor(queue->monitor);
741
742	PR_ASSERT(!PR_CLIST_IS_EMPTY(&self->link));
743
744	#if 0
745	/* I do not think that we need to do this anymore.
746	if we do not acknowledge and this is the only
747	only event in the queue, any calls to process
748	the eventQ will be effective noop.
749	*/
750	if (queue->type == EventQueueIsNative)
751	_pl_AcknowledgeNativeNotify(queue);
752	#endif
753
754	PR_REMOVE_AND_INIT_LINK(&self->link);
755
756	PR_ExitMonitor(queue->monitor);
757	}
758
759	PR_IMPLEMENT(void)
760	PL_FavorPerformanceHint(PRBool favorPerformanceOverEventStarvation,
761	PRUint32 starvationDelay)
762	{
763	#if defined(_WIN32)
764
765	_md_StarvationDelay = starvationDelay;
766
767	if (favorPerformanceOverEventStarvation) {
768	_md_PerformanceSetting++;
769	return;
770	}
771
772	_md_PerformanceSetting--;
773
774	if (_md_PerformanceSetting == 0) {
775	/* Switched from allowing event starvation to no event starvation so grab
776	the current time to determine when to actually switch to using timers
777	instead of posted WM_APP messages. */
778	_md_SwitchTime = PR_IntervalToMilliseconds(PR_IntervalNow());
779	}
780
781	#endif
782	}
783
784	/*******************************************************************************
785	* Pure Event Queues
786	*
787	* For when you're only processing PLEvents and there is no native
788	* select, thread messages, or AppleEvents.
789	******************************************************************************/
790
791	PR_IMPLEMENT(PLEvent*)
792	PL_WaitForEvent(PLEventQueue* self)
793	{
794	PLEvent* event;
795	PRMonitor* mon;
796
797	if (self == NULL)
798	return NULL;
799
800	mon = self->monitor;
801	PR_EnterMonitor(mon);
802
803	while ((event = PL_GetEvent(self)) == NULL) {
804	PRStatus err;
805	PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ waiting for event"));
806	err = PR_Wait(mon, PR_INTERVAL_NO_TIMEOUT);
807	if ((err == PR_FAILURE)
808	&& (PR_PENDING_INTERRUPT_ERROR == PR_GetError())) break;
809	}
810
811	PR_ExitMonitor(mon);
812	return event;
813	}
814
815	PR_IMPLEMENT(void)
816	PL_EventLoop(PLEventQueue* self)
817	{
818	if (self == NULL)
819	return;
820
821	while (PR_TRUE) {
822	PLEvent* event = PL_WaitForEvent(self);
823	if (event == NULL) {
824	/* This can only happen if the current thread is interrupted */
825	return;
826	}
827
828	PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ processing event"));
829	PL_HandleEvent(event);
830	PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ done processing event"));
831	}
832	}
833
834	/*******************************************************************************
835	* Native Event Queues
836	*
837	* For when you need to call select, or WaitNextEvent, and yet also want
838	* to handle PLEvents.
839	******************************************************************************/
840
841	static PRStatus
842	_pl_SetupNativeNotifier(PLEventQueue* self)
843	{
844	#if defined(VMS)
845	unsigned int status;
846	self->idFunc = 0;
847	self->idFuncClosure = 0;
848	status = LIB$GET_EF(&self->efn);
849	if (!$VMS_STATUS_SUCCESS(status))
850	return PR_FAILURE;
851	PR_LOG(event_lm, PR_LOG_DEBUG,
852	("$$$ Allocated event flag %d", self->efn));
853	return PR_SUCCESS;
854	#elif defined(XP_UNIX) && !defined(XP_MACOSX)
855	int err;
856	int flags;
857
858	self->idFunc = 0;
859	self->idFuncClosure = 0;
860
861	err = pipe(self->eventPipe);
862	if (err != 0) {
863	return PR_FAILURE;
864	}
865	#ifdef VBOX
866	fcntl(self->eventPipe[0], F_SETFD, FD_CLOEXEC);
867	fcntl(self->eventPipe[1], F_SETFD, FD_CLOEXEC);
868	#endif
869
870	/* make the pipe nonblocking */
871	flags = fcntl(self->eventPipe[0], F_GETFL, 0);
872	if (flags == -1) {
873	goto failed;
874	}
875	err = fcntl(self->eventPipe[0], F_SETFL, flags \| O_NONBLOCK);
876	if (err == -1) {
877	goto failed;
878	}
879	flags = fcntl(self->eventPipe[1], F_GETFL, 0);
880	if (flags == -1) {
881	goto failed;
882	}
883	err = fcntl(self->eventPipe[1], F_SETFL, flags \| O_NONBLOCK);
884	if (err == -1) {
885	goto failed;
886	}
887	return PR_SUCCESS;
888
889	failed:
890	close(self->eventPipe[0]);
891	close(self->eventPipe[1]);
892	return PR_FAILURE;
893	#elif defined(XP_BEOS)
894	/* hook up to the nsToolkit queue, however the appshell
895	* isn't necessairly started, so we might have to create
896	* the queue ourselves
897	*/
898	char portname[64];
899	char semname[64];
900	PR_snprintf(portname, sizeof(portname), "event%lx",
901	(long unsigned) self->handlerThread);
902	PR_snprintf(semname, sizeof(semname), "sync%lx",
903	(long unsigned) self->handlerThread);
904
905	if((self->eventport = find_port(portname)) < 0)
906	{
907	/* create port
908	*/
909	self->eventport = create_port(500, portname);
910
911	/* We don't use the sem, but it has to be there
912	*/
913	create_sem(0, semname);
914	}
915
916	return PR_SUCCESS;
917	#else
918	return PR_SUCCESS;
919	#endif
920	}
921
922	static void
923	_pl_CleanupNativeNotifier(PLEventQueue* self)
924	{
925	#if defined(VMS)
926	{
927	unsigned int status;
928	PR_LOG(event_lm, PR_LOG_DEBUG,
929	("$$$ Freeing event flag %d", self->efn));
930	status = LIB$FREE_EF(&self->efn);
931	}
932	#elif defined(XP_UNIX) && !defined(XP_MACOSX)
933	close(self->eventPipe[0]);
934	close(self->eventPipe[1]);
935	#elif defined(_WIN32)
936	if (self->timerSet) {
937	KillTimer(self->eventReceiverWindow, TIMER_ID);
938	self->timerSet = PR_FALSE;
939	}
940	RemoveProp(self->eventReceiverWindow, _md_GetEventQueuePropName());
941
942	/* DestroyWindow doesn't do anything when called from a non ui thread. Since
943	* self->eventReceiverWindow was created on the ui thread, it must be destroyed
944	* on the ui thread.
945	*/
946	SendMessage(self->eventReceiverWindow, WM_CLOSE, 0, 0);
947
948	#elif defined(XP_OS2)
949	WinDestroyWindow(self->eventReceiverWindow);
950	#elif defined(MAC_USE_CFRUNLOOPSOURCE)
951
952	CFRunLoopRemoveSource(self->mMainRunLoop, self->mRunLoopSource, kCFRunLoopCommonModes);
953	CFRunLoopRemoveSource(self->mMainRunLoop, self->mRunLoopSource, self->mRunLoopModeStr); /* vbox */
954	CFRelease(self->mRunLoopSource);
955	CFRelease(self->mMainRunLoop);
956	CFRelease(self->mRunLoopModeStr); /* vbox */
957
958	#elif defined(MAC_USE_CARBON_EVENT)
959	EventComparatorUPP comparator = NewEventComparatorUPP(_md_CarbonEventComparator);
960	PR_ASSERT(comparator != NULL);
961	if (comparator) {
962	FlushSpecificEventsFromQueue(GetMainEventQueue(), comparator, self);
963	DisposeEventComparatorUPP(comparator);
964	}
965	DisposeEventHandlerUPP(self->eventHandlerUPP);
966	RemoveEventHandler(self->eventHandlerRef);
967	#endif
968	}
969
970	#if defined(_WIN32)
971
972	static PRBool _md_WasInputPending = PR_FALSE;
973	static PRUint32 _md_InputTime = 0;
974	static PRBool _md_WasPaintPending = PR_FALSE;
975	static PRUint32 _md_PaintTime = 0;
976	/* last mouse location */
977	static POINT _md_LastMousePos;
978
979	/*******************************************************************************
980	* Timer callback function. Timers are used on WIN32 instead of APP events
981	* when there are pending UI events because APP events can cause the GUI to lockup
982	* because posted messages are processed before other messages.
983	******************************************************************************/
984
985	static void CALLBACK _md_TimerProc( HWND hwnd, UINT uMsg, UINT idEvent, DWORD dwTime )
986	{
987	PREventQueue* queue = (PREventQueue *) GetProp(hwnd, _md_GetEventQueuePropName());
988	PR_ASSERT(queue != NULL);
989
990	KillTimer(hwnd, TIMER_ID);
991	queue->timerSet = PR_FALSE;
992	queue->removeMsg = PR_FALSE;
993	PL_ProcessPendingEvents( queue );
994	queue->removeMsg = PR_TRUE;
995	}
996
997	static PRBool _md_IsWIN9X = PR_FALSE;
998	static PRBool _md_IsOSSet = PR_FALSE;
999
1000	static void _md_DetermineOSType()
1001	{
1002	OSVERSIONINFO os;
1003	os.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
1004	GetVersionEx(&os);
1005	if (VER_PLATFORM_WIN32_WINDOWS == os.dwPlatformId) {
1006	_md_IsWIN9X = PR_TRUE;
1007	}
1008	}
1009
1010	static PRUint32 _md_GetPaintStarvationLimit()
1011	{
1012	if (! _md_IsOSSet) {
1013	_md_DetermineOSType();
1014	_md_IsOSSet = PR_TRUE;
1015	}
1016
1017	if (_md_IsWIN9X) {
1018	return WIN9X_PAINT_STARVATION_LIMIT;
1019	}
1020
1021	return PAINT_STARVATION_LIMIT;
1022	}
1023
1024
1025	/*
1026	* Determine if an event is being starved (i.e the starvation limit has
1027	* been exceeded.
1028	* Note: this function uses the current setting and updates the contents
1029	* of the wasPending and lastTime arguments
1030	*
1031	* ispending: PR_TRUE if the event is currently pending
1032	* starvationLimit: Threshold defined in milliseconds for determining when
1033	* the event has been held in the queue too long
1034	* wasPending: PR_TRUE if the last time _md_EventIsStarved was called
1035	* the event was pending. This value is updated within
1036	* this function.
1037	* lastTime: Holds the last time the event was in the queue.
1038	* This value is updated within this function
1039	* returns: PR_TRUE if the event is starved, PR_FALSE otherwise
1040	*/
1041
1042	static PRBool _md_EventIsStarved(PRBool isPending, PRUint32 starvationLimit,
1043	PRBool wasPending, PRUint32 lastTime,
1044	PRUint32 currentTime)
1045	{
1046	if (*wasPending && isPending) {
1047	/*
1048	* It was pending previously and the event is still
1049	* pending so check to see if the elapsed time is
1050	* over the limit which indicates the event was starved
1051	*/
1052	if ((currentTime - *lastTime) > starvationLimit) {
1053	return PR_TRUE; /* pending and over the limit */
1054	}
1055
1056	return PR_FALSE; /* pending but within the limit */
1057	}
1058
1059	if (isPending) {
1060	/*
1061	* was_pending must be false so record the current time
1062	* so the elapsed time can be computed the next time this
1063	* function is called
1064	*/
1065	*lastTime = currentTime;
1066	*wasPending = PR_TRUE;
1067	return PR_FALSE;
1068	}
1069
1070	/* Event is no longer pending */
1071	*wasPending = PR_FALSE;
1072	return PR_FALSE;
1073	}
1074
1075	/* Determines if the there is a pending Mouse or input event */
1076
1077	static PRBool _md_IsInputPending(WORD qstatus)
1078	{
1079	/* Return immediately there aren't any pending input or paints. */
1080	if (qstatus == 0) {
1081	return PR_FALSE;
1082	}
1083
1084	/* Is there anything other than a QS_MOUSEMOVE pending? */
1085	if ((qstatus & QS_MOUSEBUTTON) \|\|
1086	(qstatus & QS_KEY) \|\|
1087	(qstatus & QS_HOTKEY)) {
1088	return PR_TRUE;
1089	}
1090
1091	/*
1092	* Mouse moves need extra processing to determine if the mouse
1093	* pointer actually changed location because Windows automatically
1094	* generates WM_MOVEMOVE events when a new window is created which
1095	* we need to filter out.
1096	*/
1097	if (qstatus & QS_MOUSEMOVE) {
1098	POINT cursorPos;
1099	GetCursorPos(&cursorPos);
1100	if ((_md_LastMousePos.x == cursorPos.x) &&
1101	(_md_LastMousePos.y == cursorPos.y)) {
1102	return PR_FALSE; /* This is a fake mouse move */
1103	}
1104
1105	/* Real mouse move */
1106	_md_LastMousePos.x = cursorPos.x;
1107	_md_LastMousePos.y = cursorPos.y;
1108	return PR_TRUE;
1109	}
1110
1111	return PR_FALSE;
1112	}
1113
1114	static PRStatus
1115	_pl_NativeNotify(PLEventQueue* self)
1116	{
1117	#ifdef USE_TIMER
1118	WORD qstatus;
1119
1120	PRUint32 now = PR_IntervalToMilliseconds(PR_IntervalNow());
1121
1122	/* Since calls to set the _md_PerformanceSetting can be nested
1123	* only performance setting values <= 0 will potentially trigger
1124	* the use of a timer.
1125	*/
1126	if ((_md_PerformanceSetting <= 0) &&
1127	((now - _md_SwitchTime) > _md_StarvationDelay)) {
1128	SetTimer(self->eventReceiverWindow, TIMER_ID, 0 ,_md_TimerProc);
1129	self->timerSet = PR_TRUE;
1130	_md_WasInputPending = PR_FALSE;
1131	_md_WasPaintPending = PR_FALSE;
1132	return PR_SUCCESS;
1133	}
1134
1135	qstatus = HIWORD(GetQueueStatus(QS_INPUT \| QS_PAINT));
1136
1137	/* Check for starved input */
1138	if (_md_EventIsStarved( _md_IsInputPending(qstatus),
1139	INPUT_STARVATION_LIMIT,
1140	&_md_WasInputPending,
1141	&_md_InputTime,
1142	now )) {
1143	/*
1144	* Use a timer for notification. Timers have the lowest priority.
1145	* They are not processed until all other events have been processed.
1146	* This allows any starved paints and input to be processed.
1147	*/
1148	SetTimer(self->eventReceiverWindow, TIMER_ID, 0 ,_md_TimerProc);
1149	self->timerSet = PR_TRUE;
1150
1151	/*
1152	* Clear any pending paint. _md_WasInputPending was cleared in
1153	* _md_EventIsStarved.
1154	*/
1155	_md_WasPaintPending = PR_FALSE;
1156	return PR_SUCCESS;
1157	}
1158
1159	if (_md_EventIsStarved( (qstatus & QS_PAINT),
1160	_md_GetPaintStarvationLimit(),
1161	&_md_WasPaintPending,
1162	&_md_PaintTime,
1163	now) ) {
1164	/*
1165	* Use a timer for notification. Timers have the lowest priority.
1166	* They are not processed until all other events have been processed.
1167	* This allows any starved paints and input to be processed
1168	*/
1169	SetTimer(self->eventReceiverWindow, TIMER_ID, 0 ,_md_TimerProc);
1170	self->timerSet = PR_TRUE;
1171
1172	/*
1173	* Clear any pending input. _md_WasPaintPending was cleared in
1174	* _md_EventIsStarved.
1175	*/
1176	_md_WasInputPending = PR_FALSE;
1177	return PR_SUCCESS;
1178	}
1179
1180	/*
1181	* Nothing is being starved so post a message instead of using a timer.
1182	* Posted messages are processed before other messages so they have the
1183	* highest priority.
1184	*/
1185	#endif
1186	PostMessage( self->eventReceiverWindow, _pr_PostEventMsgId,
1187	(WPARAM)0, (LPARAM)self );
1188
1189	return PR_SUCCESS;
1190	}/* --- end _pl_NativeNotify() --- */
1191	#endif
1192
1193
1194	#if defined(XP_OS2)
1195	static PRStatus
1196	_pl_NativeNotify(PLEventQueue* self)
1197	{
1198	BOOL rc = WinPostMsg( self->eventReceiverWindow, _pr_PostEventMsgId,
1199	0, MPFROMP(self));
1200	return (rc == TRUE) ? PR_SUCCESS : PR_FAILURE;
1201	}/* --- end _pl_NativeNotify() --- */
1202	#endif /* XP_OS2 */
1203
1204	#if defined(VMS)
1205	/* Just set the event flag */
1206	static PRStatus
1207	_pl_NativeNotify(PLEventQueue* self)
1208	{
1209	unsigned int status;
1210	PR_LOG(event_lm, PR_LOG_DEBUG,
1211	("_pl_NativeNotify: self=%p efn=%d",
1212	self, self->efn));
1213	status = SYS$SETEF(self->efn);
1214	return ($VMS_STATUS_SUCCESS(status)) ? PR_SUCCESS : PR_FAILURE;
1215	}/* --- end _pl_NativeNotify() --- */
1216	#elif defined(XP_UNIX) && !defined(XP_MACOSX)
1217
1218	static PRStatus
1219	_pl_NativeNotify(PLEventQueue* self)
1220	{
1221	#define NOTIFY_TOKEN 0xFA
1222	PRInt32 count;
1223	unsigned char buf[] = { NOTIFY_TOKEN };
1224
1225	# ifdef VBOX
1226	/* Don't write two chars, because we'll only acknowledge one and that'll
1227	cause trouble for anyone selecting/polling on the read descriptor. */
1228	if (self->notified)
1229	return PR_SUCCESS;
1230	# endif
1231
1232	PR_LOG(event_lm, PR_LOG_DEBUG,
1233	("_pl_NativeNotify: self=%p",
1234	self));
1235	count = write(self->eventPipe[1], buf, 1);
1236	if (count == 1)
1237	return PR_SUCCESS;
1238	if (count == -1 && (errno == EAGAIN \|\| errno == EWOULDBLOCK))
1239	return PR_SUCCESS;
1240	return PR_FAILURE;
1241	}/* --- end _pl_NativeNotify() --- */
1242	#endif /* defined(XP_UNIX) && !defined(XP_MACOSX) */
1243
1244	#if defined(XP_BEOS)
1245	struct ThreadInterfaceData
1246	{
1247	void *data;
1248	int32 sync;
1249	};
1250
1251	static PRStatus
1252	_pl_NativeNotify(PLEventQueue* self)
1253	{
1254	struct ThreadInterfaceData id;
1255	id.data = self;
1256	id.sync = false;
1257	write_port(self->eventport, 'natv', &id, sizeof(id));
1258
1259	return PR_SUCCESS; /* Is this correct? */
1260	}
1261	#endif /* XP_BEOS */
1262
1263	#if defined(XP_MACOSX)
1264	static PRStatus
1265	_pl_NativeNotify(PLEventQueue* self)
1266	{
1267	#if defined(MAC_USE_CFRUNLOOPSOURCE)
1268	CFRunLoopSourceSignal(self->mRunLoopSource);
1269	CFRunLoopWakeUp(self->mMainRunLoop);
1270	#elif defined(MAC_USE_CARBON_EVENT)
1271	OSErr err;
1272	EventRef newEvent;
1273	if (CreateEvent(NULL, kEventClassPL, kEventProcessPLEvents,
1274	0, kEventAttributeNone, &newEvent) != noErr)
1275	return PR_FAILURE;
1276	err = SetEventParameter(newEvent, kEventParamPLEventQueue,
1277	typeUInt32, sizeof(PREventQueue*), &self);
1278	if (err == noErr) {
1279	err = PostEventToQueue(GetMainEventQueue(), newEvent, kEventPriorityLow);
1280	ReleaseEvent(newEvent);
1281	}
1282	if (err != noErr)
1283	return PR_FAILURE;
1284	#endif
1285	return PR_SUCCESS;
1286	}
1287	#endif /* defined(XP_MACOSX) */
1288
1289	static PRStatus
1290	_pl_AcknowledgeNativeNotify(PLEventQueue* self)
1291	{
1292	#if defined(_WIN32) \|\| defined(XP_OS2)
1293	#ifdef XP_OS2
1294	QMSG aMsg;
1295	#else
1296	MSG aMsg;
1297	#endif
1298	/*
1299	* only remove msg when we've been called directly by
1300	* PL_ProcessPendingEvents, not when we've been called by
1301	* the window proc because the window proc will remove the
1302	* msg for us.
1303	*/
1304	if (self->removeMsg) {
1305	PR_LOG(event_lm, PR_LOG_DEBUG,
1306	("_pl_AcknowledgeNativeNotify: self=%p", self));
1307	#ifdef XP_OS2
1308	WinPeekMsg((HAB)0, &aMsg, self->eventReceiverWindow,
1309	_pr_PostEventMsgId, _pr_PostEventMsgId, PM_REMOVE);
1310	#else
1311	PeekMessage(&aMsg, self->eventReceiverWindow,
1312	_pr_PostEventMsgId, _pr_PostEventMsgId, PM_REMOVE);
1313	if (self->timerSet) {
1314	KillTimer(self->eventReceiverWindow, TIMER_ID);
1315	self->timerSet = PR_FALSE;
1316	}
1317	#endif
1318	}
1319	return PR_SUCCESS;
1320	#elif defined(VMS)
1321	PR_LOG(event_lm, PR_LOG_DEBUG,
1322	("_pl_AcknowledgeNativeNotify: self=%p efn=%d",
1323	self, self->efn));
1324	/*
1325	** If this is the last entry, then clear the event flag. Also make sure
1326	** the flag is cleared on any spurious wakeups.
1327	*/
1328	sys$clref(self->efn);
1329	return PR_SUCCESS;
1330	#elif defined(XP_UNIX) && !defined(XP_MACOSX)
1331
1332	PRInt32 count;
1333	unsigned char c;
1334	PR_LOG(event_lm, PR_LOG_DEBUG,
1335	("_pl_AcknowledgeNativeNotify: self=%p",
1336	self));
1337	/* consume the byte NativeNotify put in our pipe: */
1338	count = read(self->eventPipe[0], &c, 1);
1339	if ((count == 1) && (c == NOTIFY_TOKEN))
1340	return PR_SUCCESS;
1341	if ((count == -1) && ((errno == EAGAIN) \|\| (errno == EWOULDBLOCK)))
1342	return PR_SUCCESS;
1343	return PR_FAILURE;
1344	#elif defined(MAC_USE_CFRUNLOOPSOURCE) /* vbox */
1345	/* vbox */
1346	CFRunLoopRunInMode(self->mRunLoopModeStr, 0.0, 1); /* vbox */
1347	return PR_SUCCESS; /* vbox */
1348	#else
1349
1350	/* nothing to do on the other platforms */
1351	return PR_SUCCESS;
1352	#endif
1353	}
1354
1355	PR_IMPLEMENT(PRInt32)
1356	PL_GetEventQueueSelectFD(PLEventQueue* self)
1357	{
1358	if (self == NULL)
1359	return -1;
1360
1361	#if defined(VMS)
1362	return -(self->efn);
1363	#elif defined(XP_UNIX) && !defined(XP_MACOSX)
1364	return self->eventPipe[0];
1365	#else
1366	return -1; /* other platforms don't handle this (yet) */
1367	#endif
1368	}
1369
1370	PR_IMPLEMENT(PRBool)
1371	PL_IsQueueOnCurrentThread( PLEventQueue *queue )
1372	{
1373	PRThread *me = PR_GetCurrentThread();
1374	return me == queue->handlerThread;
1375	}
1376
1377	PR_EXTERN(PRBool)
1378	PL_IsQueueNative(PLEventQueue *queue)
1379	{
1380	return queue->type == EventQueueIsNative ? PR_TRUE : PR_FALSE;
1381	}
1382
1383	#if defined(_WIN32)
1384	/*
1385	** Global Instance handle...
1386	** In Win32 this is the module handle of the DLL.
1387	**
1388	*/
1389	static HINSTANCE _pr_hInstance;
1390	#endif
1391
1392
1393	#if defined(_WIN32)
1394
1395	/*
1396	** Initialization routine for the DLL...
1397	*/
1398
1399	BOOL WINAPI DllMain (HINSTANCE hDLL, DWORD dwReason, LPVOID lpReserved)
1400	{
1401	switch (dwReason)
1402	{
1403	case DLL_PROCESS_ATTACH:
1404	_pr_hInstance = hDLL;
1405	break;
1406
1407	case DLL_THREAD_ATTACH:
1408	break;
1409
1410	case DLL_THREAD_DETACH:
1411	break;
1412
1413	case DLL_PROCESS_DETACH:
1414	_pr_hInstance = NULL;
1415	break;
1416	}
1417
1418	return TRUE;
1419	}
1420	#endif
1421
1422
1423	#if defined(_WIN32) \|\| defined(XP_OS2)
1424	#ifdef XP_OS2
1425	MRESULT EXPENTRY
1426	_md_EventReceiverProc(HWND hwnd, ULONG uMsg, MPARAM wParam, MPARAM lParam)
1427	#else
1428	LRESULT CALLBACK
1429	_md_EventReceiverProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam)
1430	#endif
1431	{
1432	if (_pr_PostEventMsgId == uMsg )
1433	{
1434	PREventQueue queue = (PREventQueue )lParam;
1435	queue->removeMsg = PR_FALSE;
1436	PL_ProcessPendingEvents(queue);
1437	queue->removeMsg = PR_TRUE;
1438	#ifdef XP_OS2
1439	return MRFROMLONG(TRUE);
1440	#else
1441	return TRUE;
1442	#endif
1443	}
1444	return DefWindowProc(hwnd, uMsg, wParam, lParam);
1445	}
1446
1447	static PRBool isInitialized;
1448	static PRCallOnceType once;
1449	static PRLock *initLock;
1450
1451	/*
1452	** InitWinEventLib() -- Create the Windows initialization lock
1453	**
1454	*/
1455	static PRStatus InitEventLib( void )
1456	{
1457	PR_ASSERT( initLock == NULL );
1458
1459	initLock = PR_NewLock();
1460	return initLock ? PR_SUCCESS : PR_FAILURE;
1461	}
1462
1463	#endif /* Win32, OS2 */
1464
1465	#if defined(_WIN32)
1466
1467	/*
1468	** _md_CreateEventQueue() -- ModelDependent initializer
1469	*/
1470	static void _md_CreateEventQueue( PLEventQueue *eventQueue )
1471	{
1472	WNDCLASS wc;
1473
1474	/*
1475	** If this is the first call to PL_InitializeEventsLib(),
1476	** make the call to InitWinEventLib() to create the initLock.
1477	**
1478	** Then lock the initializer lock to insure that
1479	** we have exclusive control over the initialization sequence.
1480	**
1481	*/
1482
1483
1484	/* Register the windows message for XPCOM Event notification */
1485	_pr_PostEventMsgId = RegisterWindowMessage("XPCOM_PostEvent");
1486
1487	/* Register the class for the event receiver window */
1488	if (!GetClassInfo(_pr_hInstance, _pr_eventWindowClass, &wc)) {
1489	wc.style = 0;
1490	wc.lpfnWndProc = _md_EventReceiverProc;
1491	wc.cbClsExtra = 0;
1492	wc.cbWndExtra = 0;
1493	wc.hInstance = _pr_hInstance;
1494	wc.hIcon = NULL;
1495	wc.hCursor = NULL;
1496	wc.hbrBackground = (HBRUSH) NULL;
1497	wc.lpszMenuName = (LPCSTR) NULL;
1498	wc.lpszClassName = _pr_eventWindowClass;
1499	RegisterClass(&wc);
1500	}
1501
1502	/* Create the event receiver window */
1503	eventQueue->eventReceiverWindow = CreateWindow(_pr_eventWindowClass,
1504	"XPCOM:EventReceiver",
1505	0, 0, 0, 10, 10,
1506	NULL, NULL, _pr_hInstance,
1507	NULL);
1508	PR_ASSERT(eventQueue->eventReceiverWindow);
1509	/* Set a property which can be used to retrieve the event queue
1510	* within the _md_TimerProc callback
1511	*/
1512	SetProp(eventQueue->eventReceiverWindow,
1513	_md_GetEventQueuePropName(), (HANDLE)eventQueue);
1514
1515	return;
1516	} /* end _md_CreateEventQueue() */
1517	#endif /* Winxx */
1518
1519	#if defined(XP_OS2)
1520	/*
1521	** _md_CreateEventQueue() -- ModelDependent initializer
1522	*/
1523	static void _md_CreateEventQueue( PLEventQueue *eventQueue )
1524	{
1525	/* Must have HMQ for this & can't assume we already have appshell */
1526	if( FALSE == WinQueryQueueInfo( HMQ_CURRENT, NULL, 0))
1527	{
1528	PPIB ppib;
1529	PTIB ptib;
1530	HAB hab;
1531	HMQ hmq;
1532
1533	/* Set our app to be a PM app before attempting Win calls */
1534	DosGetInfoBlocks(&ptib, &ppib);
1535	ppib->pib_ultype = 3;
1536
1537	hab = WinInitialize(0);
1538	hmq = WinCreateMsgQueue(hab, 0);
1539	PR_ASSERT(hmq);
1540	}
1541
1542	if( !_pr_PostEventMsgId)
1543	{
1544	WinRegisterClass( 0 /* hab_current */,
1545	_pr_eventWindowClass,
1546	_md_EventReceiverProc,
1547	0, 0);
1548
1549	_pr_PostEventMsgId = WinAddAtom( WinQuerySystemAtomTable(),
1550	"XPCOM_PostEvent");
1551	}
1552
1553	eventQueue->eventReceiverWindow = WinCreateWindow( HWND_DESKTOP,
1554	_pr_eventWindowClass,
1555	"", 0,
1556	0, 0, 0, 0,
1557	HWND_DESKTOP,
1558	HWND_TOP,
1559	0,
1560	NULL,
1561	NULL);
1562	PR_ASSERT(eventQueue->eventReceiverWindow);
1563
1564	return;
1565	} /* end _md_CreateEventQueue() */
1566	#endif /* XP_OS2 */
1567
1568	#if (defined(XP_UNIX) && !defined(XP_MACOSX)) \|\| defined(XP_BEOS)
1569	/*
1570	** _md_CreateEventQueue() -- ModelDependent initializer
1571	*/
1572	static void _md_CreateEventQueue( PLEventQueue *eventQueue )
1573	{
1574	/* there's really nothing special to do here,
1575	** the guts of the unix stuff is in the setupnativenotify
1576	** and related functions.
1577	*/
1578	return;
1579	} /* end _md_CreateEventQueue() */
1580	#endif /* (defined(XP_UNIX) && !defined(XP_MACOSX)) \|\| defined(XP_BEOS) */
1581
1582	#if defined(MAC_USE_CFRUNLOOPSOURCE)
1583	static void _md_EventReceiverProc(void *info)
1584	{
1585	PLEventQueue queue = (PLEventQueue)info;
1586	PL_ProcessPendingEvents(queue);
1587	}
1588
1589	#elif defined(MAC_USE_CARBON_EVENT)
1590	/*
1591	** _md_CreateEventQueue() -- ModelDependent initializer
1592	*/
1593
1594	static pascal OSStatus _md_EventReceiverProc(EventHandlerCallRef nextHandler,
1595	EventRef inEvent,
1596	void* userData)
1597	{
1598	if (GetEventClass(inEvent) == kEventClassPL &&
1599	GetEventKind(inEvent) == kEventProcessPLEvents)
1600	{
1601	PREventQueue *queue;
1602	if (GetEventParameter(inEvent, kEventParamPLEventQueue,
1603	typeUInt32, NULL, sizeof(PREventQueue*), NULL,
1604	&queue) == noErr)
1605	{
1606	PL_ProcessPendingEvents(queue);
1607	return noErr;
1608	}
1609	}
1610	return eventNotHandledErr;
1611	}
1612
1613	static pascal Boolean _md_CarbonEventComparator(EventRef inEvent,
1614	void *inCompareData)
1615	{
1616	Boolean match = false;
1617
1618	if (GetEventClass(inEvent) == kEventClassPL &&
1619	GetEventKind(inEvent) == kEventProcessPLEvents)
1620	{
1621	PREventQueue *queue;
1622	match = ((GetEventParameter(inEvent, kEventParamPLEventQueue,
1623	typeUInt32, NULL, sizeof(PREventQueue*), NULL,
1624	&queue) == noErr) && (queue == inCompareData));
1625	}
1626	return match;
1627	}
1628
1629	#endif /* defined(MAC_USE_CARBON_EVENT) */
1630
1631	#if defined(XP_MACOSX)
1632	static void _md_CreateEventQueue( PLEventQueue *eventQueue )
1633	{
1634	#if defined(MAC_USE_CFRUNLOOPSOURCE)
1635	CFRunLoopSourceContext sourceContext = { 0 };
1636	sourceContext.version = 0;
1637	sourceContext.info = (void*)eventQueue;
1638	sourceContext.perform = _md_EventReceiverProc;
1639
1640	/* make a run loop source */
1641	eventQueue->mRunLoopSource = CFRunLoopSourceCreate(kCFAllocatorDefault, 0 /* order */, &sourceContext);
1642	PR_ASSERT(eventQueue->mRunLoopSource);
1643
1644	eventQueue->mMainRunLoop = CFRunLoopGetCurrent();
1645	CFRetain(eventQueue->mMainRunLoop);
1646
1647	/* and add it to the run loop */
1648	CFRunLoopAddSource(eventQueue->mMainRunLoop, eventQueue->mRunLoopSource, kCFRunLoopCommonModes);
1649
1650	/* Add it again but with a unique mode name so we can acknowledge it
1651	without processing any other message sources. */
1652	{ /* vbox */
1653	char szModeName[80]; /* vbox */
1654	snprintf(szModeName, sizeof(szModeName), "VBoxXPCOMQueueMode-%p", eventQueue); /* vbox */
1655	eventQueue->mRunLoopModeStr = CFStringCreateWithCString(kCFAllocatorDefault, /* vbox */
1656	szModeName, kCFStringEncodingASCII); /* vbox */
1657	CFRunLoopAddSource(eventQueue->mMainRunLoop, /* vbox */
1658	eventQueue->mRunLoopSource, eventQueue->mRunLoopModeStr); /* vbox */
1659	} /* vbox */
1660
1661	#elif defined(MAC_USE_CARBON_EVENT)
1662	eventQueue->eventHandlerUPP = NewEventHandlerUPP(_md_EventReceiverProc);
1663	PR_ASSERT(eventQueue->eventHandlerUPP);
1664	if (eventQueue->eventHandlerUPP)
1665	{
1666	EventTypeSpec eventType;
1667
1668	eventType.eventClass = kEventClassPL;
1669	eventType.eventKind = kEventProcessPLEvents;
1670
1671	InstallApplicationEventHandler(eventQueue->eventHandlerUPP, 1, &eventType,
1672	eventQueue, &eventQueue->eventHandlerRef);
1673	PR_ASSERT(eventQueue->eventHandlerRef);
1674	}
1675	#endif
1676	} /* end _md_CreateEventQueue() */
1677	#endif /* defined(XP_MACOSX) */
1678
1679	/* extra functions for unix */
1680
1681	#if defined(XP_UNIX) && !defined(XP_MACOSX)
1682
1683	PR_IMPLEMENT(PRInt32)
1684	PL_ProcessEventsBeforeID(PLEventQueue *aSelf, unsigned long aID)
1685	{
1686	PRInt32 count = 0;
1687	PRInt32 fullCount;
1688
1689	if (aSelf == NULL)
1690	return -1;
1691
1692	PR_EnterMonitor(aSelf->monitor);
1693
1694	if (aSelf->processingEvents) {
1695	PR_ExitMonitor(aSelf->monitor);
1696	return 0;
1697	}
1698
1699	aSelf->processingEvents = PR_TRUE;
1700
1701	/* Only process the events that are already in the queue, and
1702	* not any new events that get added. Do this by counting the
1703	* number of events currently in the queue
1704	*/
1705	fullCount = _pl_GetEventCount(aSelf);
1706	PR_LOG(event_lm, PR_LOG_DEBUG,
1707	("$$$ fullCount is %d id is %ld\n", fullCount, aID));
1708
1709	if (fullCount == 0) {
1710	aSelf->processingEvents = PR_FALSE;
1711	PR_ExitMonitor(aSelf->monitor);
1712	return 0;
1713	}
1714
1715	PR_ExitMonitor(aSelf->monitor);
1716
1717	while (fullCount-- > 0) {
1718	/* peek at the next event */
1719	PLEvent *event;
1720	event = PR_EVENT_PTR(aSelf->queue.next);
1721	if (event == NULL)
1722	break;
1723	PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ processing event %ld\n",
1724	event->id));
1725	if (event->id >= aID) {
1726	PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ skipping event and breaking"));
1727	break;
1728	}
1729
1730	event = PL_GetEvent(aSelf);
1731	PL_HandleEvent(event);
1732	PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ done processing event"));
1733	count++;
1734	}
1735
1736	PR_EnterMonitor(aSelf->monitor);
1737
1738	/* if full count still had items left then there's still items left
1739	in the queue. Let the native notify token stay. */
1740
1741	if (aSelf->type == EventQueueIsNative) {
1742	fullCount = _pl_GetEventCount(aSelf);
1743
1744	if (fullCount <= 0) {
1745	_pl_AcknowledgeNativeNotify(aSelf);
1746	aSelf->notified = PR_FALSE;
1747	}
1748	}
1749
1750	aSelf->processingEvents = PR_FALSE;
1751
1752	PR_ExitMonitor(aSelf->monitor);
1753
1754	return count;
1755	}
1756
1757	PR_IMPLEMENT(void)
1758	PL_RegisterEventIDFunc(PLEventQueue *aSelf, PLGetEventIDFunc aFunc,
1759	void *aClosure)
1760	{
1761	aSelf->idFunc = aFunc;
1762	aSelf->idFuncClosure = aClosure;
1763	}
1764
1765	PR_IMPLEMENT(void)
1766	PL_UnregisterEventIDFunc(PLEventQueue *aSelf)
1767	{
1768	aSelf->idFunc = 0;
1769	aSelf->idFuncClosure = 0;
1770	}
1771
1772	#endif /* defined(XP_UNIX) && !defined(XP_MACOSX) */
1773
1774	/* --- end plevent.c --- */

注意: 瀏覽 TracBrowser 來幫助您使用儲存庫瀏覽器

source: vbox/trunk/src/libs/xpcom18a4/xpcom/threads/plevent.c@ 44770

以其他格式下載: