# $Id: Makefile.kmk 23452 2009-09-30 20:33:08Z vboxsync $
## @file
# Makefile for the linux guest additions base directory.
#

#
# Copyright (C) 2006-2007 Sun Microsystems, Inc.
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#
# Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
# Clara, CA 95054 USA or visit http://www.sun.com if you need
# additional information or have any questions.
#

SUB_DEPTH = ../../../..
include	$(KBUILD_PATH)/subheader.kmk

#
# Include sub-makefiles.
#
include $(PATH_SUB_CURRENT)/sharedfolders/Makefile.kmk
include $(PATH_SUB_CURRENT)/drm/Makefile.kmk

#
# Globals
#
VBOX_LNX_ADD_INS_OUT_DIR           := $(PATH_TARGET)/Additions/Installer/linux
VBOX_PATH_LINUX_ADDITION_INSTALLER := $(PATH_SUB_CURRENT)/installer
VBOX_PATH_X11_ADDITION_INSTALLER   := $(PATH_ROOT)/src/VBox/Additions/x11/Installer


#
# Targets
#
ifndef VBOX_OSE
 BLDDIRS     += $(VBOX_LNX_ADD_INS_OUT_DIR) $(VBOX_LNX_ADD_INS_OUT_DIR)/module
 PACKING     += $(PATH_BIN)/additions/VBoxLinuxAdditions.run
 OTHER_CLEAN += $(PACKING)
 # OSE only contains the source code for this
 VBOX_SELINUX_CMPLD := $(PATH_SUB_CURRENT)/selinux-fedora/vbox_x11.pp
endif


#
# Files to install
#
VBOX_ADD_STRIP_BIN += \
	VBoxService \
	VBoxClient \
	VBoxControl \
	VBoxOGLarrayspu.so \
	VBoxOGLcrutil.so \
	VBoxOGLerrorspu.so \
	VBoxOGLfeedbackspu.so \
	VBoxOGLpackspu.so \
	VBoxOGLpassthroughspu.so \
	VBoxOGL.so

VBOX_ADD_STRIP_BIN.linux = \
	vboxmouse_drv_70.so \
	vboxmouse_drv_71.so \
	vboxmouse_drv_14.so \
	vboxmouse_drv_15.so \
	vboxmouse_drv_16.so \
	vboxmouse_drv_17.so \
	vboxvideo_drv_70.so \
	vboxvideo_drv_71.so \
	vboxvideo_drv_13.so \
	vboxvideo_drv_14.so \
	vboxvideo_drv_15.so \
	vboxvideo_drv_16.so \
	vboxvideo_drv_17.so \
	mount.vboxsf

VBOX_ADD_STRIP_OBJ.linux = \
	vboxmouse_drv.o \
	vboxvideo_drv.o

VBOX_ADD_MODULES.linux = \
	vboxguest \
	vboxvfs \
	vboxvideo_drm

VBOX_LNX_ADD_STRIP_BIN = $(VBOX_ADD_STRIP_BIN) $(VBOX_ADD_STRIP_BIN.linux)
VBOX_LNX_ADD_STRIP_OBJ = $(VBOX_ADD_STRIP_OBJ) $(VBOX_ADD_STRIP_OBJ.linux)
VBOX_LNX_ADD_MODULES   = $(VBOX_ADD_MODULES) $(VBOX_ADD_MODULES.linux)

#
# All the bin files that go into the archives.
#
VBOX_LNX_ADD_DBG_SYM_FILES := $(addsuffix .dbgsym,$(VBOX_LNX_ADD_STRIP_BIN))
VBOX_LNX_ADD_INS_FILES := $(addprefix $(VBOX_LNX_ADD_INS_OUT_DIR)/,$(VBOX_LNX_ADD_STRIP_BIN) $(VBOX_LNX_ADD_STRIP_OBJ) $(VBOX_LNX_ADD_DBG_SYM_FILES))
VBOX_LNX_ADD_INS_MODULES := $(addprefix $(VBOX_LNX_ADD_INS_OUT_DIR)/module/,$(VBOX_LNX_ADD_MODULES))

# Cleanup of the the installer directory files
OTHER_CLEAN += $(VBOX_LNX_ADD_INS_FILES)) $(VBOX_LNX_ADD_INS_MODULES)

# pattern rule for copying the debug info from the VBOX_LNX_ADD_STRIP_BIN files to the installation directory
$(addprefix $(VBOX_LNX_ADD_INS_OUT_DIR)/,$(VBOX_LNX_ADD_DBG_SYM_FILES)): \
		$(VBOX_LNX_ADD_INS_OUT_DIR)/%.dbgsym : $(PATH_BIN)/additions/% | $$(dir $$@)
	$(call MSG_TOOL,copydbg,$<,$@)
	$(QUIET)objcopy --only-keep-debug $< $@

# pattern rule for stripping and copying the VBOX_LNX_ADD_STRIP_BIN files to the installation directory
$(addprefix $(VBOX_LNX_ADD_INS_OUT_DIR)/,$(VBOX_LNX_ADD_STRIP_BIN)): \
		$(VBOX_LNX_ADD_INS_OUT_DIR)/% : $(PATH_BIN)/additions/% \
		$(VBOX_LNX_ADD_INS_OUT_DIR)/%.dbgsym \
		| $$(dir $$@)
	$(call MSG_INST_FILE,$<,$@)
	$(QUIET)$(INSTALL) -m 0755 $(if $(VBOX_DO_STRIP),-s,) $< $@
	$(QUIET)objcopy --add-gnu-debuglink=$(addsuffix .dbgsym,$@) $@

# pattern rule for stripping and copying the VBOX_LNX_ADD_STRIP_OBJ files to the installation directory
$(addprefix $(VBOX_LNX_ADD_INS_OUT_DIR)/,$(VBOX_LNX_ADD_STRIP_OBJ)): \
		$(VBOX_LNX_ADD_INS_OUT_DIR)/% : $(PATH_BIN)/additions/% | $$(dir $$@)
	$(call MSG_INST_FILE,$<,$@)
ifeq ($(VBOX_DO_STRIP),)
	$(QUIET)$(INSTALL) -m 0644 $< $@
else # strip to temp file because of umask.
	$(QUIET)objcopy --strip-unneeded -R .comment $< $@.tmp
	$(QUIET)$(INSTALL) -m 0644 $@.tmp $@
	$(QUIET)$(RM) -f -- $@.tmp
endif

# pattern rule for copying the VBOX_LNX_ADD_MODULES files to the installation directory
$(VBOX_LNX_ADD_INS_MODULES): \
		$(VBOX_LNX_ADD_INS_OUT_DIR)/module/% : $(PATH_BIN)/additions/src/% | $(VBOX_LNX_ADD_INS_OUT_DIR)/module/
	$(call MSG_INST_FILE,$<,$@)
# Remove target directories first, otherwise the behaviour of cp will not be
# what we want if it already exists. See the cp manual page for more details.
	$(QUIET)$(RM) -Rf $@
	$(QUIET)cp -af $< $(VBOX_LNX_ADD_INS_OUT_DIR)/module


INSTALLS += $(if $(VBOX_OSE),, lnx_add_inst-nobin)
lnx_add_inst-nobin_INST = obj/Additions/Installer/linux
lnx_add_inst-nobin_MODE = a+r,u+w
lnx_add_inst-nobin_SOURCES = \
		../x11/Installer/VBoxRandR.sh \
		installer/vboxadd-service.sh \
		../x11/Installer/98vboxadd-xclient \
		../x11/Installer/vboxclient.desktop \
		installer/vboxadd.sh \
		../x11/Installer/vboxvideo.ids \
		../x11/Installer/linux_xorg_suse11.conf \
		installer/90-vboxguest.fdi


INSTALLS += $(if $(VBOX_OSE),, lnx_add_inst-bin)
lnx_add_inst-bin_INST = obj/Additions/Installer/linux
lnx_add_inst-bin_MODE = a+rx,u+w
lnx_add_inst-bin_SOURCES = \
	../../Installer/linux/routines.sh \
	../x11/Installer/x11config.pl \
	../x11/Installer/x11config15.pl \
	selinux-fedora/vbox_x11.pp


INSTALLS += GuestDrivers-src
GuestDrivers-src_INST = bin/additions/src/
GuestDrivers-src_MODE = a+r,u+w
GuestDrivers-src_SOURCES = Makefile


INSTALLS += $(if $(VBOX_OSE),, AutoRun-sh)
AutoRun-sh_INST = bin/additions/
AutoRun-sh_MODE = a+rx,u+w
AutoRun-sh_SOURCES = $(VBOX_PATH_LINUX_ADDITION_INSTALLER)/autorun.sh


#
# Install the sources of our (sanity) test kernel module
#
INSTALLS += $(if $(VBOX_OSE),, LnxAddTest-src)
LnxAddTest-src_INST    = obj/Additions/Installer/linux/module/test
LnxAddTest-src_MODE    = a+r,u+w
LnxAddTest-src_SOURCES = \
		installer/Makefile.test=>Makefile \
		installer/test.c


#
# Install the sources of our (sanity) test kernel rendering (DRM) module
#
INSTALLS += $(if $(VBOX_OSE),, LnxAddDRM-src)
LnxAddDRM-src_INST    = obj/Additions/Installer/linux/module/test_drm
LnxAddDRM-src_MODE    = a+r,u+w
LnxAddDRM-src_SOURCES = \
		installer/Makefile.include.header \
		installer/Makefile.include.footer \
		installer/Makefile.test.drm=>Makefile \
		installer/test_drm.c


# this file needs editing before it can be included in the generic installer.
$(VBOX_LNX_ADD_INS_OUT_DIR)/install.sh: \
	$(VBOX_PATH_LINUX_ADDITION_INSTALLER)/install.sh | $$(dir $$@)
	$(QUIET)$(SED) \
	    -e "s;_VERSION_;$(VBOX_VERSION_STRING);g" \
	    -e "s;_BUILD_;$(shell date);g" \
	    -e "s;_OSE_;$(VBOX_OSE);g" \
	    -e "s;_BUILDTYPE_;$(KBUILD_TYPE);g" \
	    -e "s;_ARCH_;$(KBUILD_TARGET_ARCH);g" \
	    --output $(VBOX_LNX_ADD_INS_OUT_DIR)/install_.sh \
	    $<
	$(QUIET)$(INSTALL) -m 0755 $(VBOX_LNX_ADD_INS_OUT_DIR)/install_.sh $@
	$(QUIET)$(RM) $(VBOX_LNX_ADD_INS_OUT_DIR)/install_.sh
OTHERS_CLEAN += $(VBOX_LNX_ADD_INS_OUT_DIR)/install.sh


include	$(KBUILD_PATH)/subfooter.kmk


#
# Build the Linux Guest Additions self extracting installer.
#
# Note that $(PATH_SUB_CURRENT) was changed by subfooter.kmk above and
# any references should be made via variables assigned a know value via := .
#
# We need to depend on all source files for the additions and shared
# folders kernel modules.
## @todo Replace the wildcard stuff by the correct file lists now that
#        we've got everything included.
#
$(PATH_BIN)/additions/VBoxLinuxAdditions.run: \
		$(INSTARGET_lnx_add_inst-nobin) \
		$(INSTARGET_lnx_add_inst-bin) \
		$(INSTARGET_LnxAddTest-src) \
		$(INSTARGET_LnxAddTestDRM-src) \
		$(VBOX_LNX_ADD_INS_FILES) \
		$(VBOX_LNX_ADD_INS_MODULES) \
		$(VBOX_LNX_ADD_INS_OUT_DIR)/install.sh \
		$(wildcard $(PATH_BIN)/additions/src/*) \
		$(wildcard $(PATH_BIN)/additions/src/*/*) \
		$(wildcard $(PATH_BIN)/additions/src/*/*/*) \
		$(wildcard $(PATH_BIN)/additions/src/*/*/*/*) \
		$(VBOX_VERSION_STAMP)
	$(QUIET)$(VBOX_MAKESELF) $(VBOX_LNX_ADD_INS_OUT_DIR) $@ \
		"VirtualBox $(VBOX_VERSION_STRING) Guest Additions for Linux installation" /bin/sh ./install.sh "> /dev/null"