; $Id: bootsector2-cpu-instr-1-template.mac 56295 2015-06-09 14:29:55Z vboxsync $ ;; @file ; Bootsector test for misc instruction - multi mode template. ; ; ; Copyright (C) 2007-2015 Oracle Corporation ; ; This file is part of VirtualBox Open Source Edition (OSE), as ; available from http://www.virtualbox.org. This file is free software; ; you can redistribute it and/or modify it under the terms of the GNU ; General Public License (GPL) as published by the Free Software ; Foundation, in version 2 as it comes in the "COPYING" file of the ; VirtualBox OSE distribution. VirtualBox OSE is distributed in the ; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. ; ; The contents of this file may alternatively be used under the terms ; of the Common Development and Distribution License Version 1.0 ; (CDDL) only, as it comes in the "COPYING.CDDL" file of the ; VirtualBox OSE distribution, in which case the provisions of the ; CDDL are applicable instead of those of the GPL. ; ; You may elect to license modified versions of this file under the ; terms and conditions of either the GPL or the CDDL or both. ; %include "bootsector2-template-header.mac" ;; ; Memory fence instructions (SSE2). ; ; @uses No registers, but BS2_SEL_SPARE0 is trashed. ; BEGINPROC TMPL_NM(TestMemFences) push xBP mov xBP, xSP push sAX push xBX push xCX push xDX push xDI push xSI sub xSP, 80h ; iret stack frame space. mov xSI, xSP ; Save the stack register. mov xAX, .s_szSubTestName call TMPL_NM_CMN(TestSub) ; ; SSE2 supported? ; mov eax, 1 xor ecx, ecx cpuid test edx, X86_CPUID_FEATURE_EDX_SSE2 jz .skip ; ; Check that the standard instruction encodings work. ; mov xBX, [xSP + 10h] mov [xSP], xAX mfence mov [xSP], xCX mov xBX, [xSP + 08h] sfence mov [xSP], xDX mov xBX, [xSP] lfence mov bx, [xSP + 04h] ; ; The instruction encodings in the intel manual may open the RM as well ; as prefixes open to interpretation. AMD sets RM=0 in their docs. ; ; lfence = 0f,ea,e8 ; mfence = 0f,ea,f0 ; sfence = 0f,ea,f8 ; (RM is the lower 3 bits of the last byte.) %assign MY_RM 0xe8 %rep 18h db 0fh, 0aeh, MY_RM db X86_OP_PRF_CS, 0fh, 0aeh, MY_RM db X86_OP_PRF_DS, 0fh, 0aeh, MY_RM db X86_OP_PRF_ES, 0fh, 0aeh, MY_RM db X86_OP_PRF_FS, 0fh, 0aeh, MY_RM db X86_OP_PRF_GS, 0fh, 0aeh, MY_RM db X86_OP_PRF_SS, 0fh, 0aeh, MY_RM db X86_OP_PRF_SIZE_ADDR, 0fh, 0aeh, MY_RM BS2_TRAP_INSTR X86_XCPT_UD, 0, db X86_OP_PRF_SIZE_OP, 0fh, 0aeh, MY_RM ; (used in group) BS2_TRAP_INSTR X86_XCPT_UD, 0, db X86_OP_PRF_LOCK, 0fh, 0aeh, MY_RM ; (used in group) BS2_TRAP_INSTR X86_XCPT_UD, 0, db X86_OP_PRF_REPZ, 0fh, 0aeh, MY_RM ; (used in group) BS2_TRAP_INSTR X86_XCPT_UD, 0, db X86_OP_PRF_REPNZ, 0fh, 0aeh, MY_RM ; (used in group) %ifdef TMPL_64BIT %assign MY_REX 0x40 %rep 10h ; Rex prefixes doesn't change anything. db MY_REX, 0fh, 0aeh, MY_RM db X86_OP_PRF_CS, MY_REX, 0fh, 0aeh, MY_RM db X86_OP_PRF_DS, MY_REX, 0fh, 0aeh, MY_RM db X86_OP_PRF_ES, MY_REX, 0fh, 0aeh, MY_RM db X86_OP_PRF_FS, MY_REX, 0fh, 0aeh, MY_RM db X86_OP_PRF_GS, MY_REX, 0fh, 0aeh, MY_RM db X86_OP_PRF_SS, MY_REX, 0fh, 0aeh, MY_RM db X86_OP_PRF_SIZE_ADDR, MY_REX, 0fh, 0aeh, MY_RM BS2_TRAP_INSTR X86_XCPT_UD, 0, db X86_OP_PRF_SIZE_OP, MY_REX, 0fh, 0aeh, MY_RM ; (used in group) BS2_TRAP_INSTR X86_XCPT_UD, 0, db X86_OP_PRF_LOCK, MY_REX, 0fh, 0aeh, MY_RM ; (used in group) BS2_TRAP_INSTR X86_XCPT_UD, 0, db X86_OP_PRF_REPZ, MY_REX, 0fh, 0aeh, MY_RM ; (used in group) BS2_TRAP_INSTR X86_XCPT_UD, 0, db X86_OP_PRF_REPNZ, MY_REX, 0fh, 0aeh, MY_RM ; (used in group) %assign MY_REX (MY_REX + 1) %endrep %endif %assign MY_RM (MY_RM + 1) %endrep ; ; Done. ; call TMPL_NM_CMN(TestSubDone) .done: mov xSP, xSI add xSP, 80h pop xSI pop xDI pop xDX pop xCX pop xBX pop sAX leave ret .skip: mov xAX, .s_szSse2Missing call TMPL_NM_CMN(TestSubDone) jmp .done .s_szSubTestName: db TMPL_MODE_STR, ', mfence et al.', 0 .s_szSse2Missing: db 'SSE2 is missing', 0 ENDPROC TMPL_NM(TestMemFences) ;; ; Proving intel manual wrong about using REX.X for BSWAP R8-R15 on 64-bit. ; Checking the 'undefined' 16-bit bswap behavior. ; ; @uses No registers, but BS2_SEL_SPARE0 is trashed. ; BEGINPROC TMPL_NM(TestBSwap) push xBP mov xBP, xSP push sAX push xBX push xCX push xDX push xDI push xSI sub xSP, 80h ; iret stack frame space. mov xSI, xSP ; Save the stack register. mov xAX, .s_szSubTestName call TMPL_NM_CMN(TestSub) ; ; Assert sanity. ; mov eax, 11223344h bswap eax TEST_ASSERT_SIMPLE eax, 44332211h, jz, "32-bit BSWAP EAX" ; ; Buggy manual (325383-041US, December 2011). ; %ifdef TMPL_64BIT push r8 mov r8d, 55667788h mov eax, 55667788h db X86_OP_REX_X bswap eax ; does it access r8 or eax? TEST_ASSERT_SIMPLE eax, 88776655h, jz, "REX.X BSWAP EAX - Wrong EAX." TEST_ASSERT_SIMPLE r8, 55667788h, jz, "REX.X BSWAP EAX - Wrong R8." mov r8d, 55667788h mov eax, 55667788h db X86_OP_REX_R bswap eax ; does it access r8 or eax? TEST_ASSERT_SIMPLE eax, 88776655h, jz, "REX.R BSWAP EAX - Wrong EAX." TEST_ASSERT_SIMPLE r8, 55667788h, jz, "REX.R BSWAP EAX - Wrong R8." mov r8d, 55667788h mov eax, 55667788h db X86_OP_REX_B bswap eax ; does it access r8 or eax? TEST_ASSERT_SIMPLE rax, 55667788h, jz, "REX.B BSWAP R8D - Wrong RAX." TEST_ASSERT_SIMPLE r8d, 88776655h, jz, "REX.B BSWAP R8D - Wrong R8D." pop r8 %endif ; ; 'Undefined' 16-bit behavior. ; ; Zeroing of the lower 16-bits has been observed on: ; - Intel(R) Core(TM) i7-3960X CPU @ 3.30GHz ; %ifndef TestBSwap16_defined %define TestBSwap16_defined %macro TestBSwap16 3, mov %3, %2 ; save the primary register. %ifdef TMPL_64BIT mov %2, 0ffffffff98765432h ; Set the upper bit as well. %else mov %2, 98765432h %endif %ifndef TMPL_16BIT db X86_OP_PRF_SIZE_OP %endif bswap %1 xchg %2, %3 ; Restore and save the result (xSP). TEST_ASSERT_SIMPLE %3, 98760000h, jz, "Unexpected 16-bit BSWAP error." %endmacro %endif TestBSwap16 eax, sAX, sSI TestBSwap16 ebx, sBX, sSI TestBSwap16 ecx, sCX, sSI TestBSwap16 edx, sDX, sSI TestBSwap16 esp, sSP, sSI TestBSwap16 ebp, sBP, sSI TestBSwap16 edi, sDI, sSI TestBSwap16 esi, sSI, sDI %ifdef TMPL_64BIT TestBSwap16 r8d, r8, rax TestBSwap16 r9d, r9, rax TestBSwap16 r10d, r10, rax TestBSwap16 r11d, r11, rax TestBSwap16 r12d, r12, rax TestBSwap16 r13d, r13, rax TestBSwap16 r14d, r14, rax TestBSwap16 r15d, r15, rax %endif ; ; Done. ; call TMPL_NM_CMN(TestSubDone) .done: mov xSP, xSI add xSP, 80h pop xSI pop xDI pop xDX pop xCX pop xBX pop sAX leave ret .s_szSubTestName: db TMPL_MODE_STR, ', bswap', 0 ENDPROC TMPL_NM(TestBSwap) ;; ; Do the tests for this mode. ; ; @uses nothing ; BEGINCODELOW BITS 16 BEGINPROC TMPL_NM(DoTestsForMode_rm) push bp mov bp, sp push ax ; ; Check if the mode and NX is supported, do the switch. ; call TMPL_NM(Bs2IsModeSupported_rm) jz .done call TMPL_NM(Bs2EnterMode_rm) BITS TMPL_BITS ; ; Test exception handler basics using INT3 and #BP. ; call TMPL_NM(TestMemFences) call TMPL_NM(TestBSwap) ; ; Back to real mode. ; call TMPL_NM(Bs2ExitMode) BITS 16 call Bs2DisableNX_r86 .done: pop ax leave ret ENDPROC TMPL_NM(DoTestsForMode_rm) TMPL_BEGINCODE BITS TMPL_BITS %include "bootsector2-template-footer.mac"