# Makefile.in generated by automake 1.15.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2017 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Copyright © 2012 Intel Corporation # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice (including the next # paragraph) shall be included in all copies or substantial portions of the # Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING # FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS # IN THE SOFTWARE. VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_compile_flag.m4 \ $(top_srcdir)/m4/ax_check_gnu_make.m4 \ $(top_srcdir)/m4/ax_check_python_mako_module.m4 \ $(top_srcdir)/m4/ax_gcc_builtin.m4 \ $(top_srcdir)/m4/ax_gcc_func_attribute.m4 \ $(top_srcdir)/m4/ax_prog_bison.m4 \ $(top_srcdir)/m4/ax_prog_flex.m4 \ $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/VERSION $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(noinst_HEADERS) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = src/egl/main/egl.pc src/gbm/main/gbm.pc \ src/mapi/es1api/glesv1_cm.pc src/mapi/es2api/glesv2.pc CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac HEADERS = $(noinst_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/bin/ar-lib \ $(top_srcdir)/bin/compile $(top_srcdir)/bin/config.guess \ $(top_srcdir)/bin/config.sub $(top_srcdir)/bin/install-sh \ $(top_srcdir)/bin/ltmain.sh $(top_srcdir)/bin/missing \ $(top_srcdir)/src/egl/main/egl.pc.in \ $(top_srcdir)/src/gbm/main/gbm.pc.in \ $(top_srcdir)/src/mapi/es1api/glesv1_cm.pc.in \ $(top_srcdir)/src/mapi/es2api/glesv2.pc.in bin/ar-lib \ bin/compile bin/config.guess bin/config.sub bin/install-sh \ bin/ltmain.sh bin/missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz GZIP_ENV = --best DIST_TARGETS = dist-xz dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMDGPU_CFLAGS = @AMDGPU_CFLAGS@ AMDGPU_LIBS = @AMDGPU_LIBS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ ANDROID_CFLAGS = @ANDROID_CFLAGS@ ANDROID_LIBS = @ANDROID_LIBS@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BSYMBOLIC = @BSYMBOLIC@ CC = @CC@ CCAS = @CCAS@ CCASDEPMODE = @CCASDEPMODE@ CCASFLAGS = @CCASFLAGS@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CLANG_RESOURCE_DIR = @CLANG_RESOURCE_DIR@ CLOCK_LIB = @CLOCK_LIB@ CLOVER_STD_OVERRIDE = @CLOVER_STD_OVERRIDE@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ D3D_DRIVER_INSTALL_DIR = @D3D_DRIVER_INSTALL_DIR@ DEFINES = @DEFINES@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DLOPEN_LIBS = @DLOPEN_LIBS@ DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@ DRI2PROTO_LIBS = @DRI2PROTO_LIBS@ DRIGL_CFLAGS = @DRIGL_CFLAGS@ DRIGL_LIBS = @DRIGL_LIBS@ DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@ DRI_DRIVER_SEARCH_DIR = @DRI_DRIVER_SEARCH_DIR@ DRI_LIB_DEPS = @DRI_LIB_DEPS@ DRI_PC_REQ_PRIV = @DRI_PC_REQ_PRIV@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGL_CFLAGS = @EGL_CFLAGS@ EGL_LIB_DEPS = @EGL_LIB_DEPS@ EGL_NATIVE_PLATFORM = @EGL_NATIVE_PLATFORM@ EGREP = @EGREP@ ETNAVIV_CFLAGS = @ETNAVIV_CFLAGS@ ETNAVIV_LIBS = @ETNAVIV_LIBS@ EXEEXT = @EXEEXT@ EXPAT_CFLAGS = @EXPAT_CFLAGS@ EXPAT_LIBS = @EXPAT_LIBS@ FGREP = @FGREP@ FREEDRENO_CFLAGS = @FREEDRENO_CFLAGS@ FREEDRENO_LIBS = @FREEDRENO_LIBS@ GALLIUM_PIPE_LOADER_DEFINES = @GALLIUM_PIPE_LOADER_DEFINES@ GBM_PC_LIB_PRIV = @GBM_PC_LIB_PRIV@ GBM_PC_REQ_PRIV = @GBM_PC_REQ_PRIV@ GC_SECTIONS = @GC_SECTIONS@ GLESv1_CM_LIB_DEPS = @GLESv1_CM_LIB_DEPS@ GLESv1_CM_PC_LIB_PRIV = @GLESv1_CM_PC_LIB_PRIV@ GLESv2_LIB_DEPS = @GLESv2_LIB_DEPS@ GLESv2_PC_LIB_PRIV = @GLESv2_PC_LIB_PRIV@ GLPROTO_CFLAGS = @GLPROTO_CFLAGS@ GLPROTO_LIBS = @GLPROTO_LIBS@ GLVND_CFLAGS = @GLVND_CFLAGS@ GLVND_LIBS = @GLVND_LIBS@ GLX_TLS = @GLX_TLS@ GL_LIB = @GL_LIB@ GL_LIB_DEPS = @GL_LIB_DEPS@ GL_PC_CFLAGS = @GL_PC_CFLAGS@ GL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@ GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@ GREP = @GREP@ HAVE_XF86VIDMODE = @HAVE_XF86VIDMODE@ I915_CFLAGS = @I915_CFLAGS@ I915_LIBS = @I915_LIBS@ INDENT = @INDENT@ INDENT_FLAGS = @INDENT_FLAGS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LD_NO_UNDEFINED = @LD_NO_UNDEFINED@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBATOMIC_LIBS = @LIBATOMIC_LIBS@ LIBCLC_INCLUDEDIR = @LIBCLC_INCLUDEDIR@ LIBCLC_LIBEXECDIR = @LIBCLC_LIBEXECDIR@ LIBDRM_CFLAGS = @LIBDRM_CFLAGS@ LIBDRM_LIBS = @LIBDRM_LIBS@ LIBELF_CFLAGS = @LIBELF_CFLAGS@ LIBELF_LIBS = @LIBELF_LIBS@ LIBGLVND_DATADIR = @LIBGLVND_DATADIR@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBSENSORS_LIBS = @LIBSENSORS_LIBS@ LIBTOOL = @LIBTOOL@ LIBUNWIND_CFLAGS = @LIBUNWIND_CFLAGS@ LIBUNWIND_LIBS = @LIBUNWIND_LIBS@ LIB_DIR = @LIB_DIR@ LIB_EXT = @LIB_EXT@ LIPO = @LIPO@ LLVM_CFLAGS = @LLVM_CFLAGS@ LLVM_CONFIG = @LLVM_CONFIG@ LLVM_CXXFLAGS = @LLVM_CXXFLAGS@ LLVM_INCLUDEDIR = @LLVM_INCLUDEDIR@ LLVM_LDFLAGS = @LLVM_LDFLAGS@ LLVM_LIBS = @LLVM_LIBS@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSVC2013_COMPAT_CFLAGS = @MSVC2013_COMPAT_CFLAGS@ MSVC2013_COMPAT_CXXFLAGS = @MSVC2013_COMPAT_CXXFLAGS@ NINE_MAJOR = @NINE_MAJOR@ NINE_MINOR = @NINE_MINOR@ NINE_TINY = @NINE_TINY@ NINE_VERSION = @NINE_VERSION@ NM = @NM@ NMEDIT = @NMEDIT@ NOUVEAU_CFLAGS = @NOUVEAU_CFLAGS@ NOUVEAU_LIBS = @NOUVEAU_LIBS@ NVVIEUX_CFLAGS = @NVVIEUX_CFLAGS@ NVVIEUX_LIBS = @NVVIEUX_LIBS@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMX_BELLAGIO_CFLAGS = @OMX_BELLAGIO_CFLAGS@ OMX_BELLAGIO_LIBS = @OMX_BELLAGIO_LIBS@ OMX_BELLAGIO_LIB_INSTALL_DIR = @OMX_BELLAGIO_LIB_INSTALL_DIR@ OPENCL_LIBNAME = @OPENCL_LIBNAME@ OPENCL_VERSION = @OPENCL_VERSION@ OSMESA_LIB = @OSMESA_LIB@ OSMESA_LIB_DEPS = @OSMESA_LIB_DEPS@ OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@ OSMESA_PC_REQ = @OSMESA_PC_REQ@ OSMESA_VERSION = @OSMESA_VERSION@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POSIX_SHELL = @POSIX_SHELL@ PTHREADSTUBS_CFLAGS = @PTHREADSTUBS_CFLAGS@ PTHREADSTUBS_LIBS = @PTHREADSTUBS_LIBS@ PTHREAD_CC = @PTHREAD_CC@ PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ PTHREAD_LIBS = @PTHREAD_LIBS@ PWR8_CFLAGS = @PWR8_CFLAGS@ PYTHON2 = @PYTHON2@ RADEON_CFLAGS = @RADEON_CFLAGS@ RADEON_LIBS = @RADEON_LIBS@ RANLIB = @RANLIB@ RM = @RM@ SED = @SED@ SELINUX_CFLAGS = @SELINUX_CFLAGS@ SELINUX_LIBS = @SELINUX_LIBS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SIMPENROSE_CFLAGS = @SIMPENROSE_CFLAGS@ SIMPENROSE_LIBS = @SIMPENROSE_LIBS@ SSE41_CFLAGS = @SSE41_CFLAGS@ STRIP = @STRIP@ SWR_AVX2_CXXFLAGS = @SWR_AVX2_CXXFLAGS@ SWR_AVX_CXXFLAGS = @SWR_AVX_CXXFLAGS@ SWR_CXX11_CXXFLAGS = @SWR_CXX11_CXXFLAGS@ SWR_KNL_CXXFLAGS = @SWR_KNL_CXXFLAGS@ SWR_SKX_CXXFLAGS = @SWR_SKX_CXXFLAGS@ VALGRIND_CFLAGS = @VALGRIND_CFLAGS@ VALGRIND_LIBS = @VALGRIND_LIBS@ VA_CFLAGS = @VA_CFLAGS@ VA_LIBS = @VA_LIBS@ VA_LIB_INSTALL_DIR = @VA_LIB_INSTALL_DIR@ VA_MAJOR = @VA_MAJOR@ VA_MINOR = @VA_MINOR@ VC5_SIMULATOR_CFLAGS = @VC5_SIMULATOR_CFLAGS@ VC5_SIMULATOR_LIBS = @VC5_SIMULATOR_LIBS@ VDPAU_CFLAGS = @VDPAU_CFLAGS@ VDPAU_LIBS = @VDPAU_LIBS@ VDPAU_LIB_INSTALL_DIR = @VDPAU_LIB_INSTALL_DIR@ VDPAU_MAJOR = @VDPAU_MAJOR@ VDPAU_MINOR = @VDPAU_MINOR@ VERSION = @VERSION@ VISIBILITY_CFLAGS = @VISIBILITY_CFLAGS@ VISIBILITY_CXXFLAGS = @VISIBILITY_CXXFLAGS@ VL_CFLAGS = @VL_CFLAGS@ VL_LIBS = @VL_LIBS@ VULKAN_ICD_INSTALL_DIR = @VULKAN_ICD_INSTALL_DIR@ WAYLAND_CLIENT_CFLAGS = @WAYLAND_CLIENT_CFLAGS@ WAYLAND_CLIENT_LIBS = @WAYLAND_CLIENT_LIBS@ WAYLAND_PROTOCOLS_DATADIR = @WAYLAND_PROTOCOLS_DATADIR@ WAYLAND_SCANNER = @WAYLAND_SCANNER@ WAYLAND_SCANNER_CFLAGS = @WAYLAND_SCANNER_CFLAGS@ WAYLAND_SCANNER_LIBS = @WAYLAND_SCANNER_LIBS@ WAYLAND_SERVER_CFLAGS = @WAYLAND_SERVER_CFLAGS@ WAYLAND_SERVER_LIBS = @WAYLAND_SERVER_LIBS@ WNO_OVERRIDE_INIT = @WNO_OVERRIDE_INIT@ X11_INCLUDES = @X11_INCLUDES@ XA_MAJOR = @XA_MAJOR@ XA_MINOR = @XA_MINOR@ XA_TINY = @XA_TINY@ XA_VERSION = @XA_VERSION@ XCB_DRI2_CFLAGS = @XCB_DRI2_CFLAGS@ XCB_DRI2_LIBS = @XCB_DRI2_LIBS@ XCB_DRI3_CFLAGS = @XCB_DRI3_CFLAGS@ XCB_DRI3_LIBS = @XCB_DRI3_LIBS@ XF86VIDMODE_CFLAGS = @XF86VIDMODE_CFLAGS@ XF86VIDMODE_LIBS = @XF86VIDMODE_LIBS@ XLIBGL_CFLAGS = @XLIBGL_CFLAGS@ XLIBGL_LIBS = @XLIBGL_LIBS@ XVMC_CFLAGS = @XVMC_CFLAGS@ XVMC_LIBS = @XVMC_LIBS@ XVMC_LIB_INSTALL_DIR = @XVMC_LIB_INSTALL_DIR@ XVMC_MAJOR = @XVMC_MAJOR@ XVMC_MINOR = @XVMC_MINOR@ YACC = @YACC@ YFLAGS = @YFLAGS@ ZLIB_CFLAGS = @ZLIB_CFLAGS@ ZLIB_LIBS = @ZLIB_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ acv_mako_found = @acv_mako_found@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ ax_pthread_config = @ax_pthread_config@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ ifGNUmake = @ifGNUmake@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = src AM_DISTCHECK_CONFIGURE_FLAGS = \ --enable-dri \ --enable-dri3 \ --enable-egl \ --enable-gallium-tests \ --enable-gallium-osmesa \ --enable-llvm \ --enable-gbm \ --enable-gles1 \ --enable-gles2 \ --enable-glx \ --enable-glx-tls \ --enable-nine \ --enable-opencl \ --enable-opengl \ --enable-va \ --enable-vdpau \ --enable-xa \ --enable-xvmc \ --enable-llvm-shared-libs \ --enable-libunwind \ --with-platforms=x11,wayland,drm,surfaceless \ --with-dri-drivers=i915,i965,nouveau,radeon,r200,swrast \ --with-gallium-drivers=i915,nouveau,r300,pl111,r600,radeonsi,freedreno,svga,swrast,vc4,virgl,swr,etnaviv,imx \ --with-vulkan-drivers=intel,radeon ACLOCAL_AMFLAGS = -I m4 EXTRA_DIST = \ autogen.sh \ common.py \ docs \ doxygen \ bin/git_sha1_gen.py \ scons \ SConstruct \ build-support/conftest.dyn \ build-support/conftest.map noinst_HEADERS = \ include/c99_alloca.h \ include/c99_compat.h \ include/c99_math.h \ include/c11 \ include/drm-uapi/drm.h \ include/drm-uapi/drm_fourcc.h \ include/drm-uapi/drm_mode.h \ include/drm-uapi/i915_drm.h \ include/drm-uapi/vc4_drm.h \ include/D3D9 \ include/GL/wglext.h \ include/HaikuGL \ include/no_extern_c.h \ include/pci_ids all: all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): src/egl/main/egl.pc: $(top_builddir)/config.status $(top_srcdir)/src/egl/main/egl.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ src/gbm/main/gbm.pc: $(top_builddir)/config.status $(top_srcdir)/src/gbm/main/gbm.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ src/mapi/es1api/glesv1_cm.pc: $(top_builddir)/config.status $(top_srcdir)/src/mapi/es1api/glesv1_cm.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ src/mapi/es2api/glesv2.pc: $(top_builddir)/config.status $(top_srcdir)/src/mapi/es2api/glesv2.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(HEADERS) installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ dist-tarZ dist-xz dist-zip distcheck distclean \ distclean-generic distclean-libtool distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am .PRECIOUS: Makefile # We list some directories in EXTRA_DIST, but don't actually want to include # the .gitignore files in the tarball. dist-hook: find $(distdir) -name .gitignore -exec $(RM) {} + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: